2 * Intel IO-APIC support for multi-Pentium hosts.
4 * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
6 * Many thanks to Stig Venaas for trying out countless experimental
7 * patches and reporting/debugging problems patiently!
9 * (c) 1999, Multiple IO-APIC support, developed by
10 * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
11 * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
12 * further tested and cleaned up by Zach Brown <zab@redhat.com>
13 * and Ingo Molnar <mingo@redhat.com>
16 * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
17 * thanks to Eric Gilmore
19 * for testing these extensively
20 * Paul Diefenbaugh : Added full ACPI support
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/sched.h>
28 #include <linux/pci.h>
29 #include <linux/mc146818rtc.h>
30 #include <linux/acpi.h>
31 #include <linux/sysdev.h>
32 #include <linux/msi.h>
33 #include <linux/htirq.h>
35 #include <acpi/acpi_bus.h>
42 #include <asm/proto.h>
43 #include <asm/mach_apic.h>
47 #include <asm/msidef.h>
48 #include <asm/hypertransport.h>
53 unsigned move_cleanup_count;
55 u8 move_in_progress : 1;
58 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
59 struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
60 [0] = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, },
61 [1] = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, },
62 [2] = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, },
63 [3] = { .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR, },
64 [4] = { .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR, },
65 [5] = { .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR, },
66 [6] = { .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR, },
67 [7] = { .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR, },
68 [8] = { .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR, },
69 [9] = { .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR, },
70 [10] = { .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, },
71 [11] = { .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, },
72 [12] = { .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, },
73 [13] = { .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, },
74 [14] = { .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, },
75 [15] = { .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, },
78 static int assign_irq_vector(int irq, cpumask_t mask);
80 #define __apicdebuginit __init
82 int sis_apic_bug; /* not actually supported, dummy for compile */
84 static int no_timer_check;
86 static int disable_timer_pin_1 __initdata;
88 int timer_over_8254 __initdata = 1;
90 /* Where if anywhere is the i8259 connect in external int mode */
91 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
93 static DEFINE_SPINLOCK(ioapic_lock);
94 DEFINE_SPINLOCK(vector_lock);
97 * # of IRQ routing registers
99 int nr_ioapic_registers[MAX_IO_APICS];
102 * Rough estimation of how many shared IRQs there are, can
103 * be changed anytime.
105 #define MAX_PLUS_SHARED_IRQS NR_IRQS
106 #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
109 * This is performance-critical, we want to do it O(1)
111 * the indexing order of this array favors 1:1 mappings
112 * between pins and IRQs.
115 static struct irq_pin_list {
116 short apic, pin, next;
117 } irq_2_pin[PIN_MAP_SIZE];
121 unsigned int unused[3];
125 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
127 return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
128 + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
131 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
133 struct io_apic __iomem *io_apic = io_apic_base(apic);
134 writel(reg, &io_apic->index);
135 return readl(&io_apic->data);
138 static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
140 struct io_apic __iomem *io_apic = io_apic_base(apic);
141 writel(reg, &io_apic->index);
142 writel(value, &io_apic->data);
146 * Re-write a value: to be used for read-modify-write
147 * cycles where the read already set up the index register.
149 static inline void io_apic_modify(unsigned int apic, unsigned int value)
151 struct io_apic __iomem *io_apic = io_apic_base(apic);
152 writel(value, &io_apic->data);
155 static int io_apic_level_ack_pending(unsigned int irq)
157 struct irq_pin_list *entry;
161 spin_lock_irqsave(&ioapic_lock, flags);
162 entry = irq_2_pin + irq;
170 reg = io_apic_read(entry->apic, 0x10 + pin*2);
171 /* Is the remote IRR bit set? */
172 pending |= (reg >> 14) & 1;
175 entry = irq_2_pin + entry->next;
177 spin_unlock_irqrestore(&ioapic_lock, flags);
182 * Synchronize the IO-APIC and the CPU by doing
183 * a dummy read from the IO-APIC
185 static inline void io_apic_sync(unsigned int apic)
187 struct io_apic __iomem *io_apic = io_apic_base(apic);
188 readl(&io_apic->data);
191 #define __DO_ACTION(R, ACTION, FINAL) \
195 struct irq_pin_list *entry = irq_2_pin + irq; \
197 BUG_ON(irq >= NR_IRQS); \
203 reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \
205 io_apic_modify(entry->apic, reg); \
209 entry = irq_2_pin + entry->next; \
214 struct { u32 w1, w2; };
215 struct IO_APIC_route_entry entry;
218 static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
220 union entry_union eu;
222 spin_lock_irqsave(&ioapic_lock, flags);
223 eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
224 eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
225 spin_unlock_irqrestore(&ioapic_lock, flags);
230 * When we write a new IO APIC routing entry, we need to write the high
231 * word first! If the mask bit in the low word is clear, we will enable
232 * the interrupt, and we need to make sure the entry is fully populated
233 * before that happens.
236 __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
238 union entry_union eu;
240 io_apic_write(apic, 0x11 + 2*pin, eu.w2);
241 io_apic_write(apic, 0x10 + 2*pin, eu.w1);
244 static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
247 spin_lock_irqsave(&ioapic_lock, flags);
248 __ioapic_write_entry(apic, pin, e);
249 spin_unlock_irqrestore(&ioapic_lock, flags);
253 * When we mask an IO APIC routing entry, we need to write the low
254 * word first, in order to set the mask bit before we change the
257 static void ioapic_mask_entry(int apic, int pin)
260 union entry_union eu = { .entry.mask = 1 };
262 spin_lock_irqsave(&ioapic_lock, flags);
263 io_apic_write(apic, 0x10 + 2*pin, eu.w1);
264 io_apic_write(apic, 0x11 + 2*pin, eu.w2);
265 spin_unlock_irqrestore(&ioapic_lock, flags);
269 static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
272 struct irq_pin_list *entry = irq_2_pin + irq;
274 BUG_ON(irq >= NR_IRQS);
281 io_apic_write(apic, 0x11 + pin*2, dest);
282 reg = io_apic_read(apic, 0x10 + pin*2);
285 io_apic_modify(apic, reg);
288 entry = irq_2_pin + entry->next;
292 static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
294 struct irq_cfg *cfg = irq_cfg + irq;
299 cpus_and(tmp, mask, cpu_online_map);
303 if (assign_irq_vector(irq, mask))
306 cpus_and(tmp, cfg->domain, mask);
307 dest = cpu_mask_to_apicid(tmp);
310 * Only the high 8 bits are valid.
312 dest = SET_APIC_LOGICAL_ID(dest);
314 spin_lock_irqsave(&ioapic_lock, flags);
315 __target_IO_APIC_irq(irq, dest, cfg->vector);
316 irq_desc[irq].affinity = mask;
317 spin_unlock_irqrestore(&ioapic_lock, flags);
322 * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
323 * shared ISA-space IRQs, so we have to support them. We are super
324 * fast in the common case, and fast for shared ISA-space IRQs.
326 static void add_pin_to_irq(unsigned int irq, int apic, int pin)
328 static int first_free_entry = NR_IRQS;
329 struct irq_pin_list *entry = irq_2_pin + irq;
331 BUG_ON(irq >= NR_IRQS);
333 entry = irq_2_pin + entry->next;
335 if (entry->pin != -1) {
336 entry->next = first_free_entry;
337 entry = irq_2_pin + entry->next;
338 if (++first_free_entry >= PIN_MAP_SIZE)
339 panic("io_apic.c: ran out of irq_2_pin entries!");
346 #define DO_ACTION(name,R,ACTION, FINAL) \
348 static void name##_IO_APIC_irq (unsigned int irq) \
349 __DO_ACTION(R, ACTION, FINAL)
351 DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) )
353 DO_ACTION( __unmask, 0, &= 0xfffeffff, )
356 static void mask_IO_APIC_irq (unsigned int irq)
360 spin_lock_irqsave(&ioapic_lock, flags);
361 __mask_IO_APIC_irq(irq);
362 spin_unlock_irqrestore(&ioapic_lock, flags);
365 static void unmask_IO_APIC_irq (unsigned int irq)
369 spin_lock_irqsave(&ioapic_lock, flags);
370 __unmask_IO_APIC_irq(irq);
371 spin_unlock_irqrestore(&ioapic_lock, flags);
374 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
376 struct IO_APIC_route_entry entry;
378 /* Check delivery_mode to be sure we're not clearing an SMI pin */
379 entry = ioapic_read_entry(apic, pin);
380 if (entry.delivery_mode == dest_SMI)
383 * Disable it in the IO-APIC irq-routing table:
385 ioapic_mask_entry(apic, pin);
388 static void clear_IO_APIC (void)
392 for (apic = 0; apic < nr_ioapics; apic++)
393 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
394 clear_IO_APIC_pin(apic, pin);
397 int skip_ioapic_setup;
400 static int __init parse_noapic(char *str)
402 disable_ioapic_setup();
405 early_param("noapic", parse_noapic);
407 /* Actually the next is obsolete, but keep it for paranoid reasons -AK */
408 static int __init disable_timer_pin_setup(char *arg)
410 disable_timer_pin_1 = 1;
413 __setup("disable_timer_pin_1", disable_timer_pin_setup);
415 static int __init setup_disable_8254_timer(char *s)
417 timer_over_8254 = -1;
420 static int __init setup_enable_8254_timer(char *s)
426 __setup("disable_8254_timer", setup_disable_8254_timer);
427 __setup("enable_8254_timer", setup_enable_8254_timer);
431 * Find the IRQ entry number of a certain pin.
433 static int find_irq_entry(int apic, int pin, int type)
437 for (i = 0; i < mp_irq_entries; i++)
438 if (mp_irqs[i].mpc_irqtype == type &&
439 (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
440 mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
441 mp_irqs[i].mpc_dstirq == pin)
448 * Find the pin to which IRQ[irq] (ISA) is connected
450 static int __init find_isa_irq_pin(int irq, int type)
454 for (i = 0; i < mp_irq_entries; i++) {
455 int lbus = mp_irqs[i].mpc_srcbus;
457 if (test_bit(lbus, mp_bus_not_pci) &&
458 (mp_irqs[i].mpc_irqtype == type) &&
459 (mp_irqs[i].mpc_srcbusirq == irq))
461 return mp_irqs[i].mpc_dstirq;
466 static int __init find_isa_irq_apic(int irq, int type)
470 for (i = 0; i < mp_irq_entries; i++) {
471 int lbus = mp_irqs[i].mpc_srcbus;
473 if (test_bit(lbus, mp_bus_not_pci) &&
474 (mp_irqs[i].mpc_irqtype == type) &&
475 (mp_irqs[i].mpc_srcbusirq == irq))
478 if (i < mp_irq_entries) {
480 for(apic = 0; apic < nr_ioapics; apic++) {
481 if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
490 * Find a specific PCI IRQ entry.
491 * Not an __init, possibly needed by modules
493 static int pin_2_irq(int idx, int apic, int pin);
495 int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
497 int apic, i, best_guess = -1;
499 apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
501 if (mp_bus_id_to_pci_bus[bus] == -1) {
502 apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
505 for (i = 0; i < mp_irq_entries; i++) {
506 int lbus = mp_irqs[i].mpc_srcbus;
508 for (apic = 0; apic < nr_ioapics; apic++)
509 if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
510 mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
513 if (!test_bit(lbus, mp_bus_not_pci) &&
514 !mp_irqs[i].mpc_irqtype &&
516 (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
517 int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
519 if (!(apic || IO_APIC_IRQ(irq)))
522 if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
525 * Use the first all-but-pin matching entry as a
526 * best-guess fuzzy result for broken mptables.
532 BUG_ON(best_guess >= NR_IRQS);
536 /* ISA interrupts are always polarity zero edge triggered,
537 * when listed as conforming in the MP table. */
539 #define default_ISA_trigger(idx) (0)
540 #define default_ISA_polarity(idx) (0)
542 /* PCI interrupts are always polarity one level triggered,
543 * when listed as conforming in the MP table. */
545 #define default_PCI_trigger(idx) (1)
546 #define default_PCI_polarity(idx) (1)
548 static int __init MPBIOS_polarity(int idx)
550 int bus = mp_irqs[idx].mpc_srcbus;
554 * Determine IRQ line polarity (high active or low active):
556 switch (mp_irqs[idx].mpc_irqflag & 3)
558 case 0: /* conforms, ie. bus-type dependent polarity */
559 if (test_bit(bus, mp_bus_not_pci))
560 polarity = default_ISA_polarity(idx);
562 polarity = default_PCI_polarity(idx);
564 case 1: /* high active */
569 case 2: /* reserved */
571 printk(KERN_WARNING "broken BIOS!!\n");
575 case 3: /* low active */
580 default: /* invalid */
582 printk(KERN_WARNING "broken BIOS!!\n");
590 static int MPBIOS_trigger(int idx)
592 int bus = mp_irqs[idx].mpc_srcbus;
596 * Determine IRQ trigger mode (edge or level sensitive):
598 switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
600 case 0: /* conforms, ie. bus-type dependent */
601 if (test_bit(bus, mp_bus_not_pci))
602 trigger = default_ISA_trigger(idx);
604 trigger = default_PCI_trigger(idx);
611 case 2: /* reserved */
613 printk(KERN_WARNING "broken BIOS!!\n");
622 default: /* invalid */
624 printk(KERN_WARNING "broken BIOS!!\n");
632 static inline int irq_polarity(int idx)
634 return MPBIOS_polarity(idx);
637 static inline int irq_trigger(int idx)
639 return MPBIOS_trigger(idx);
642 static int pin_2_irq(int idx, int apic, int pin)
645 int bus = mp_irqs[idx].mpc_srcbus;
648 * Debugging check, we are in big trouble if this message pops up!
650 if (mp_irqs[idx].mpc_dstirq != pin)
651 printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
653 if (test_bit(bus, mp_bus_not_pci)) {
654 irq = mp_irqs[idx].mpc_srcbusirq;
657 * PCI IRQs are mapped in order
661 irq += nr_ioapic_registers[i++];
664 BUG_ON(irq >= NR_IRQS);
668 static int __assign_irq_vector(int irq, cpumask_t mask)
671 * NOTE! The local APIC isn't very good at handling
672 * multiple interrupts at the same interrupt level.
673 * As the interrupt level is determined by taking the
674 * vector number and shifting that right by 4, we
675 * want to spread these out a bit so that they don't
676 * all fall in the same interrupt level.
678 * Also, we've got to be careful not to trash gate
679 * 0x80, because int 0x80 is hm, kind of importantish. ;)
681 static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
682 unsigned int old_vector;
686 BUG_ON((unsigned)irq >= NR_IRQS);
689 /* Only try and allocate irqs on cpus that are present */
690 cpus_and(mask, mask, cpu_online_map);
692 if ((cfg->move_in_progress) || cfg->move_cleanup_count)
695 old_vector = cfg->vector;
698 cpus_and(tmp, cfg->domain, mask);
699 if (!cpus_empty(tmp))
703 for_each_cpu_mask(cpu, mask) {
704 cpumask_t domain, new_mask;
708 domain = vector_allocation_domain(cpu);
709 cpus_and(new_mask, domain, cpu_online_map);
711 vector = current_vector;
712 offset = current_offset;
715 if (vector >= FIRST_SYSTEM_VECTOR) {
716 /* If we run out of vectors on large boxen, must share them. */
717 offset = (offset + 1) % 8;
718 vector = FIRST_DEVICE_VECTOR + offset;
720 if (unlikely(current_vector == vector))
722 if (vector == IA32_SYSCALL_VECTOR)
724 for_each_cpu_mask(new_cpu, new_mask)
725 if (per_cpu(vector_irq, new_cpu)[vector] != -1)
728 current_vector = vector;
729 current_offset = offset;
731 cfg->move_in_progress = 1;
732 cfg->old_domain = cfg->domain;
734 for_each_cpu_mask(new_cpu, new_mask)
735 per_cpu(vector_irq, new_cpu)[vector] = irq;
736 cfg->vector = vector;
737 cfg->domain = domain;
743 static int assign_irq_vector(int irq, cpumask_t mask)
748 spin_lock_irqsave(&vector_lock, flags);
749 err = __assign_irq_vector(irq, mask);
750 spin_unlock_irqrestore(&vector_lock, flags);
754 static void __clear_irq_vector(int irq)
760 BUG_ON((unsigned)irq >= NR_IRQS);
762 BUG_ON(!cfg->vector);
764 vector = cfg->vector;
765 cpus_and(mask, cfg->domain, cpu_online_map);
766 for_each_cpu_mask(cpu, mask)
767 per_cpu(vector_irq, cpu)[vector] = -1;
770 cfg->domain = CPU_MASK_NONE;
773 void __setup_vector_irq(int cpu)
775 /* Initialize vector_irq on a new cpu */
776 /* This function must be called with vector_lock held */
779 /* Mark the inuse vectors */
780 for (irq = 0; irq < NR_IRQS; ++irq) {
781 if (!cpu_isset(cpu, irq_cfg[irq].domain))
783 vector = irq_cfg[irq].vector;
784 per_cpu(vector_irq, cpu)[vector] = irq;
786 /* Mark the free vectors */
787 for (vector = 0; vector < NR_VECTORS; ++vector) {
788 irq = per_cpu(vector_irq, cpu)[vector];
791 if (!cpu_isset(cpu, irq_cfg[irq].domain))
792 per_cpu(vector_irq, cpu)[vector] = -1;
797 static struct irq_chip ioapic_chip;
799 static void ioapic_register_intr(int irq, unsigned long trigger)
802 irq_desc[irq].status |= IRQ_LEVEL;
803 set_irq_chip_and_handler_name(irq, &ioapic_chip,
804 handle_fasteoi_irq, "fasteoi");
806 irq_desc[irq].status &= ~IRQ_LEVEL;
807 set_irq_chip_and_handler_name(irq, &ioapic_chip,
808 handle_edge_irq, "edge");
812 static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
813 int trigger, int polarity)
815 struct irq_cfg *cfg = irq_cfg + irq;
816 struct IO_APIC_route_entry entry;
819 if (!IO_APIC_IRQ(irq))
823 if (assign_irq_vector(irq, mask))
826 cpus_and(mask, cfg->domain, mask);
828 apic_printk(APIC_VERBOSE,KERN_DEBUG
829 "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
830 "IRQ %d Mode:%i Active:%i)\n",
831 apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector,
832 irq, trigger, polarity);
835 * add it to the IO-APIC irq-routing table:
837 memset(&entry,0,sizeof(entry));
839 entry.delivery_mode = INT_DELIVERY_MODE;
840 entry.dest_mode = INT_DEST_MODE;
841 entry.dest = cpu_mask_to_apicid(mask);
842 entry.mask = 0; /* enable IRQ */
843 entry.trigger = trigger;
844 entry.polarity = polarity;
845 entry.vector = cfg->vector;
847 /* Mask level triggered irqs.
848 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
853 ioapic_register_intr(irq, trigger);
855 disable_8259A_irq(irq);
857 ioapic_write_entry(apic, pin, entry);
860 static void __init setup_IO_APIC_irqs(void)
862 int apic, pin, idx, irq, first_notcon = 1;
864 apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
866 for (apic = 0; apic < nr_ioapics; apic++) {
867 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
869 idx = find_irq_entry(apic,pin,mp_INT);
872 apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
875 apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
879 apic_printk(APIC_VERBOSE, " not connected.\n");
883 irq = pin_2_irq(idx, apic, pin);
884 add_pin_to_irq(irq, apic, pin);
886 setup_IO_APIC_irq(apic, pin, irq,
887 irq_trigger(idx), irq_polarity(idx));
892 apic_printk(APIC_VERBOSE, " not connected.\n");
896 * Set up the 8259A-master output pin as broadcast to all
899 static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
901 struct IO_APIC_route_entry entry;
904 memset(&entry,0,sizeof(entry));
906 disable_8259A_irq(0);
909 apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
912 * We use logical delivery to get the timer IRQ
915 entry.dest_mode = INT_DEST_MODE;
916 entry.mask = 0; /* unmask IRQ now */
917 entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
918 entry.delivery_mode = INT_DELIVERY_MODE;
921 entry.vector = vector;
924 * The timer IRQ doesn't have to know that behind the
925 * scene we have a 8259A-master in AEOI mode ...
927 set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
930 * Add it to the IO-APIC irq-routing table:
932 spin_lock_irqsave(&ioapic_lock, flags);
933 io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
934 io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
935 spin_unlock_irqrestore(&ioapic_lock, flags);
940 void __apicdebuginit print_IO_APIC(void)
943 union IO_APIC_reg_00 reg_00;
944 union IO_APIC_reg_01 reg_01;
945 union IO_APIC_reg_02 reg_02;
948 if (apic_verbosity == APIC_QUIET)
951 printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
952 for (i = 0; i < nr_ioapics; i++)
953 printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
954 mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
957 * We are a bit conservative about what we expect. We have to
958 * know about every hardware change ASAP.
960 printk(KERN_INFO "testing the IO APIC.......................\n");
962 for (apic = 0; apic < nr_ioapics; apic++) {
964 spin_lock_irqsave(&ioapic_lock, flags);
965 reg_00.raw = io_apic_read(apic, 0);
966 reg_01.raw = io_apic_read(apic, 1);
967 if (reg_01.bits.version >= 0x10)
968 reg_02.raw = io_apic_read(apic, 2);
969 spin_unlock_irqrestore(&ioapic_lock, flags);
972 printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
973 printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
974 printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
976 printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01);
977 printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries);
979 printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ);
980 printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version);
982 if (reg_01.bits.version >= 0x10) {
983 printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
984 printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration);
987 printk(KERN_DEBUG ".... IRQ redirection table:\n");
989 printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
990 " Stat Dmod Deli Vect: \n");
992 for (i = 0; i <= reg_01.bits.entries; i++) {
993 struct IO_APIC_route_entry entry;
995 entry = ioapic_read_entry(apic, i);
997 printk(KERN_DEBUG " %02x %03X ",
1002 printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
1007 entry.delivery_status,
1009 entry.delivery_mode,
1014 printk(KERN_DEBUG "IRQ to pin mappings:\n");
1015 for (i = 0; i < NR_IRQS; i++) {
1016 struct irq_pin_list *entry = irq_2_pin + i;
1019 printk(KERN_DEBUG "IRQ%d ", i);
1021 printk("-> %d:%d", entry->apic, entry->pin);
1024 entry = irq_2_pin + entry->next;
1029 printk(KERN_INFO ".................................... done.\n");
1036 static __apicdebuginit void print_APIC_bitfield (int base)
1041 if (apic_verbosity == APIC_QUIET)
1044 printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
1045 for (i = 0; i < 8; i++) {
1046 v = apic_read(base + i*0x10);
1047 for (j = 0; j < 32; j++) {
1057 void __apicdebuginit print_local_APIC(void * dummy)
1059 unsigned int v, ver, maxlvt;
1061 if (apic_verbosity == APIC_QUIET)
1064 printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
1065 smp_processor_id(), hard_smp_processor_id());
1066 v = apic_read(APIC_ID);
1067 printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v));
1068 v = apic_read(APIC_LVR);
1069 printk(KERN_INFO "... APIC VERSION: %08x\n", v);
1070 ver = GET_APIC_VERSION(v);
1071 maxlvt = get_maxlvt();
1073 v = apic_read(APIC_TASKPRI);
1074 printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
1076 v = apic_read(APIC_ARBPRI);
1077 printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
1078 v & APIC_ARBPRI_MASK);
1079 v = apic_read(APIC_PROCPRI);
1080 printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
1082 v = apic_read(APIC_EOI);
1083 printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
1084 v = apic_read(APIC_RRR);
1085 printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
1086 v = apic_read(APIC_LDR);
1087 printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
1088 v = apic_read(APIC_DFR);
1089 printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
1090 v = apic_read(APIC_SPIV);
1091 printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
1093 printk(KERN_DEBUG "... APIC ISR field:\n");
1094 print_APIC_bitfield(APIC_ISR);
1095 printk(KERN_DEBUG "... APIC TMR field:\n");
1096 print_APIC_bitfield(APIC_TMR);
1097 printk(KERN_DEBUG "... APIC IRR field:\n");
1098 print_APIC_bitfield(APIC_IRR);
1100 v = apic_read(APIC_ESR);
1101 printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
1103 v = apic_read(APIC_ICR);
1104 printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
1105 v = apic_read(APIC_ICR2);
1106 printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
1108 v = apic_read(APIC_LVTT);
1109 printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
1111 if (maxlvt > 3) { /* PC is LVT#4. */
1112 v = apic_read(APIC_LVTPC);
1113 printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
1115 v = apic_read(APIC_LVT0);
1116 printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
1117 v = apic_read(APIC_LVT1);
1118 printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
1120 if (maxlvt > 2) { /* ERR is LVT#3. */
1121 v = apic_read(APIC_LVTERR);
1122 printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
1125 v = apic_read(APIC_TMICT);
1126 printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
1127 v = apic_read(APIC_TMCCT);
1128 printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
1129 v = apic_read(APIC_TDCR);
1130 printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
1134 void print_all_local_APICs (void)
1136 on_each_cpu(print_local_APIC, NULL, 1, 1);
1139 void __apicdebuginit print_PIC(void)
1142 unsigned long flags;
1144 if (apic_verbosity == APIC_QUIET)
1147 printk(KERN_DEBUG "\nprinting PIC contents\n");
1149 spin_lock_irqsave(&i8259A_lock, flags);
1151 v = inb(0xa1) << 8 | inb(0x21);
1152 printk(KERN_DEBUG "... PIC IMR: %04x\n", v);
1154 v = inb(0xa0) << 8 | inb(0x20);
1155 printk(KERN_DEBUG "... PIC IRR: %04x\n", v);
1159 v = inb(0xa0) << 8 | inb(0x20);
1163 spin_unlock_irqrestore(&i8259A_lock, flags);
1165 printk(KERN_DEBUG "... PIC ISR: %04x\n", v);
1167 v = inb(0x4d1) << 8 | inb(0x4d0);
1168 printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
1173 static void __init enable_IO_APIC(void)
1175 union IO_APIC_reg_01 reg_01;
1176 int i8259_apic, i8259_pin;
1178 unsigned long flags;
1180 for (i = 0; i < PIN_MAP_SIZE; i++) {
1181 irq_2_pin[i].pin = -1;
1182 irq_2_pin[i].next = 0;
1186 * The number of IO-APIC IRQ registers (== #pins):
1188 for (apic = 0; apic < nr_ioapics; apic++) {
1189 spin_lock_irqsave(&ioapic_lock, flags);
1190 reg_01.raw = io_apic_read(apic, 1);
1191 spin_unlock_irqrestore(&ioapic_lock, flags);
1192 nr_ioapic_registers[apic] = reg_01.bits.entries+1;
1194 for(apic = 0; apic < nr_ioapics; apic++) {
1196 /* See if any of the pins is in ExtINT mode */
1197 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1198 struct IO_APIC_route_entry entry;
1199 entry = ioapic_read_entry(apic, pin);
1201 /* If the interrupt line is enabled and in ExtInt mode
1202 * I have found the pin where the i8259 is connected.
1204 if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
1205 ioapic_i8259.apic = apic;
1206 ioapic_i8259.pin = pin;
1212 /* Look to see what if the MP table has reported the ExtINT */
1213 i8259_pin = find_isa_irq_pin(0, mp_ExtINT);
1214 i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
1215 /* Trust the MP table if nothing is setup in the hardware */
1216 if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
1217 printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
1218 ioapic_i8259.pin = i8259_pin;
1219 ioapic_i8259.apic = i8259_apic;
1221 /* Complain if the MP table and the hardware disagree */
1222 if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
1223 (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
1225 printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
1229 * Do not trust the IO-APIC being empty at bootup
1235 * Not an __init, needed by the reboot code
1237 void disable_IO_APIC(void)
1240 * Clear the IO-APIC before rebooting:
1245 * If the i8259 is routed through an IOAPIC
1246 * Put that IOAPIC in virtual wire mode
1247 * so legacy interrupts can be delivered.
1249 if (ioapic_i8259.pin != -1) {
1250 struct IO_APIC_route_entry entry;
1252 memset(&entry, 0, sizeof(entry));
1253 entry.mask = 0; /* Enabled */
1254 entry.trigger = 0; /* Edge */
1256 entry.polarity = 0; /* High */
1257 entry.delivery_status = 0;
1258 entry.dest_mode = 0; /* Physical */
1259 entry.delivery_mode = dest_ExtINT; /* ExtInt */
1261 entry.dest = GET_APIC_ID(apic_read(APIC_ID));
1264 * Add it to the IO-APIC irq-routing table:
1266 ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
1269 disconnect_bsp_APIC(ioapic_i8259.pin != -1);
1273 * There is a nasty bug in some older SMP boards, their mptable lies
1274 * about the timer IRQ. We do the following to work around the situation:
1276 * - timer IRQ defaults to IO-APIC IRQ
1277 * - if this function detects that timer IRQs are defunct, then we fall
1278 * back to ISA timer IRQs
1280 static int __init timer_irq_works(void)
1282 unsigned long t1 = jiffies;
1285 /* Let ten ticks pass... */
1286 mdelay((10 * 1000) / HZ);
1289 * Expect a few ticks at least, to be sure some possible
1290 * glue logic does not lock up after one or two first
1291 * ticks in a non-ExtINT mode. Also the local APIC
1292 * might have cached one ExtINT interrupt. Finally, at
1293 * least one tick may be lost due to delays.
1297 if (jiffies - t1 > 4)
1303 * In the SMP+IOAPIC case it might happen that there are an unspecified
1304 * number of pending IRQ events unhandled. These cases are very rare,
1305 * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
1306 * better to do it this way as thus we do not have to be aware of
1307 * 'pending' interrupts in the IRQ path, except at this point.
1310 * Edge triggered needs to resend any interrupt
1311 * that was delayed but this is now handled in the device
1316 * Starting up a edge-triggered IO-APIC interrupt is
1317 * nasty - we need to make sure that we get the edge.
1318 * If it is already asserted for some reason, we need
1319 * return 1 to indicate that is was pending.
1321 * This is not complete - we should be able to fake
1322 * an edge even if it isn't on the 8259A...
1325 static unsigned int startup_ioapic_irq(unsigned int irq)
1327 int was_pending = 0;
1328 unsigned long flags;
1330 spin_lock_irqsave(&ioapic_lock, flags);
1332 disable_8259A_irq(irq);
1333 if (i8259A_irq_pending(irq))
1336 __unmask_IO_APIC_irq(irq);
1337 spin_unlock_irqrestore(&ioapic_lock, flags);
1342 static int ioapic_retrigger_irq(unsigned int irq)
1344 struct irq_cfg *cfg = &irq_cfg[irq];
1346 unsigned long flags;
1348 spin_lock_irqsave(&vector_lock, flags);
1350 cpu_set(first_cpu(cfg->domain), mask);
1352 send_IPI_mask(mask, cfg->vector);
1353 spin_unlock_irqrestore(&vector_lock, flags);
1359 * Level and edge triggered IO-APIC interrupts need different handling,
1360 * so we use two separate IRQ descriptors. Edge triggered IRQs can be
1361 * handled with the level-triggered descriptor, but that one has slightly
1362 * more overhead. Level-triggered interrupts cannot be handled with the
1363 * edge-triggered handler, without risking IRQ storms and other ugly
1368 asmlinkage void smp_irq_move_cleanup_interrupt(void)
1370 unsigned vector, me;
1375 me = smp_processor_id();
1376 for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
1378 struct irq_desc *desc;
1379 struct irq_cfg *cfg;
1380 irq = __get_cpu_var(vector_irq)[vector];
1384 desc = irq_desc + irq;
1385 cfg = irq_cfg + irq;
1386 spin_lock(&desc->lock);
1387 if (!cfg->move_cleanup_count)
1390 if ((vector == cfg->vector) && cpu_isset(me, cfg->domain))
1393 __get_cpu_var(vector_irq)[vector] = -1;
1394 cfg->move_cleanup_count--;
1396 spin_unlock(&desc->lock);
1402 static void irq_complete_move(unsigned int irq)
1404 struct irq_cfg *cfg = irq_cfg + irq;
1405 unsigned vector, me;
1407 if (likely(!cfg->move_in_progress))
1410 vector = ~get_irq_regs()->orig_rax;
1411 me = smp_processor_id();
1412 if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) {
1413 cpumask_t cleanup_mask;
1415 cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
1416 cfg->move_cleanup_count = cpus_weight(cleanup_mask);
1417 send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
1418 cfg->move_in_progress = 0;
1422 static inline void irq_complete_move(unsigned int irq) {}
1425 static void ack_apic_edge(unsigned int irq)
1427 irq_complete_move(irq);
1428 move_native_irq(irq);
1432 static void ack_apic_level(unsigned int irq)
1434 int do_unmask_irq = 0;
1436 irq_complete_move(irq);
1437 #if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE)
1438 /* If we are moving the irq we need to mask it */
1439 if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
1441 mask_IO_APIC_irq(irq);
1446 * We must acknowledge the irq before we move it or the acknowledge will
1447 * not propagate properly.
1451 /* Now we can move and renable the irq */
1452 if (unlikely(do_unmask_irq)) {
1453 /* Only migrate the irq if the ack has been received.
1455 * On rare occasions the broadcast level triggered ack gets
1456 * delayed going to ioapics, and if we reprogram the
1457 * vector while Remote IRR is still set the irq will never
1460 * To prevent this scenario we read the Remote IRR bit
1461 * of the ioapic. This has two effects.
1462 * - On any sane system the read of the ioapic will
1463 * flush writes (and acks) going to the ioapic from
1465 * - We get to see if the ACK has actually been delivered.
1467 * Based on failed experiments of reprogramming the
1468 * ioapic entry from outside of irq context starting
1469 * with masking the ioapic entry and then polling until
1470 * Remote IRR was clear before reprogramming the
1471 * ioapic I don't trust the Remote IRR bit to be
1472 * completey accurate.
1474 * However there appears to be no other way to plug
1475 * this race, so if the Remote IRR bit is not
1476 * accurate and is causing problems then it is a hardware bug
1477 * and you can go talk to the chipset vendor about it.
1479 if (!io_apic_level_ack_pending(irq))
1480 move_masked_irq(irq);
1481 unmask_IO_APIC_irq(irq);
1485 static struct irq_chip ioapic_chip __read_mostly = {
1487 .startup = startup_ioapic_irq,
1488 .mask = mask_IO_APIC_irq,
1489 .unmask = unmask_IO_APIC_irq,
1490 .ack = ack_apic_edge,
1491 .eoi = ack_apic_level,
1493 .set_affinity = set_ioapic_affinity_irq,
1495 .retrigger = ioapic_retrigger_irq,
1498 static inline void init_IO_APIC_traps(void)
1503 * NOTE! The local APIC isn't very good at handling
1504 * multiple interrupts at the same interrupt level.
1505 * As the interrupt level is determined by taking the
1506 * vector number and shifting that right by 4, we
1507 * want to spread these out a bit so that they don't
1508 * all fall in the same interrupt level.
1510 * Also, we've got to be careful not to trash gate
1511 * 0x80, because int 0x80 is hm, kind of importantish. ;)
1513 for (irq = 0; irq < NR_IRQS ; irq++) {
1515 if (IO_APIC_IRQ(tmp) && !irq_cfg[tmp].vector) {
1517 * Hmm.. We don't have an entry for this,
1518 * so default to an old-fashioned 8259
1519 * interrupt if we can..
1522 make_8259A_irq(irq);
1524 /* Strange. Oh, well.. */
1525 irq_desc[irq].chip = &no_irq_chip;
1530 static void enable_lapic_irq (unsigned int irq)
1534 v = apic_read(APIC_LVT0);
1535 apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
1538 static void disable_lapic_irq (unsigned int irq)
1542 v = apic_read(APIC_LVT0);
1543 apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
1546 static void ack_lapic_irq (unsigned int irq)
1551 static void end_lapic_irq (unsigned int i) { /* nothing */ }
1553 static struct hw_interrupt_type lapic_irq_type __read_mostly = {
1554 .name = "local-APIC",
1555 .typename = "local-APIC-edge",
1556 .startup = NULL, /* startup_irq() not used for IRQ0 */
1557 .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
1558 .enable = enable_lapic_irq,
1559 .disable = disable_lapic_irq,
1560 .ack = ack_lapic_irq,
1561 .end = end_lapic_irq,
1564 static void setup_nmi (void)
1567 * Dirty trick to enable the NMI watchdog ...
1568 * We put the 8259A master into AEOI mode and
1569 * unmask on all local APICs LVT0 as NMI.
1571 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
1572 * is from Maciej W. Rozycki - so we do not have to EOI from
1573 * the NMI handler or the timer interrupt.
1575 printk(KERN_INFO "activating NMI Watchdog ...");
1577 enable_NMI_through_LVT0(NULL);
1583 * This looks a bit hackish but it's about the only one way of sending
1584 * a few INTA cycles to 8259As and any associated glue logic. ICR does
1585 * not support the ExtINT mode, unfortunately. We need to send these
1586 * cycles as some i82489DX-based boards have glue logic that keeps the
1587 * 8259A interrupt line asserted until INTA. --macro
1589 static inline void unlock_ExtINT_logic(void)
1592 struct IO_APIC_route_entry entry0, entry1;
1593 unsigned char save_control, save_freq_select;
1594 unsigned long flags;
1596 pin = find_isa_irq_pin(8, mp_INT);
1597 apic = find_isa_irq_apic(8, mp_INT);
1601 spin_lock_irqsave(&ioapic_lock, flags);
1602 *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
1603 *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
1604 spin_unlock_irqrestore(&ioapic_lock, flags);
1605 clear_IO_APIC_pin(apic, pin);
1607 memset(&entry1, 0, sizeof(entry1));
1609 entry1.dest_mode = 0; /* physical delivery */
1610 entry1.mask = 0; /* unmask IRQ now */
1611 entry1.dest = hard_smp_processor_id();
1612 entry1.delivery_mode = dest_ExtINT;
1613 entry1.polarity = entry0.polarity;
1617 spin_lock_irqsave(&ioapic_lock, flags);
1618 io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
1619 io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
1620 spin_unlock_irqrestore(&ioapic_lock, flags);
1622 save_control = CMOS_READ(RTC_CONTROL);
1623 save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
1624 CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
1626 CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
1631 if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
1635 CMOS_WRITE(save_control, RTC_CONTROL);
1636 CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
1637 clear_IO_APIC_pin(apic, pin);
1639 spin_lock_irqsave(&ioapic_lock, flags);
1640 io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
1641 io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
1642 spin_unlock_irqrestore(&ioapic_lock, flags);
1646 * This code may look a bit paranoid, but it's supposed to cooperate with
1647 * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
1648 * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
1649 * fanatically on his truly buggy board.
1651 * FIXME: really need to revamp this for modern platforms only.
1653 static inline void check_timer(void)
1655 struct irq_cfg *cfg = irq_cfg + 0;
1656 int apic1, pin1, apic2, pin2;
1659 * get/set the timer IRQ vector:
1661 disable_8259A_irq(0);
1662 assign_irq_vector(0, TARGET_CPUS);
1665 * Subtle, code in do_timer_interrupt() expects an AEOI
1666 * mode for the 8259A whenever interrupts are routed
1667 * through I/O APICs. Also IRQ0 has to be enabled in
1668 * the 8259A which implies the virtual wire has to be
1669 * disabled in the local APIC.
1671 apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
1673 if (timer_over_8254 > 0)
1674 enable_8259A_irq(0);
1676 pin1 = find_isa_irq_pin(0, mp_INT);
1677 apic1 = find_isa_irq_apic(0, mp_INT);
1678 pin2 = ioapic_i8259.pin;
1679 apic2 = ioapic_i8259.apic;
1681 apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
1682 cfg->vector, apic1, pin1, apic2, pin2);
1686 * Ok, does IRQ0 through the IOAPIC work?
1688 unmask_IO_APIC_irq(0);
1689 if (!no_timer_check && timer_irq_works()) {
1690 nmi_watchdog_default();
1691 if (nmi_watchdog == NMI_IO_APIC) {
1692 disable_8259A_irq(0);
1694 enable_8259A_irq(0);
1696 if (disable_timer_pin_1 > 0)
1697 clear_IO_APIC_pin(0, pin1);
1700 clear_IO_APIC_pin(apic1, pin1);
1701 apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
1702 "connected to IO-APIC\n");
1705 apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
1706 "through the 8259A ... ");
1708 apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
1711 * legacy devices should be connected to IO APIC #0
1713 setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector);
1714 if (timer_irq_works()) {
1715 apic_printk(APIC_VERBOSE," works.\n");
1716 nmi_watchdog_default();
1717 if (nmi_watchdog == NMI_IO_APIC) {
1723 * Cleanup, just in case ...
1725 clear_IO_APIC_pin(apic2, pin2);
1727 apic_printk(APIC_VERBOSE," failed.\n");
1729 if (nmi_watchdog == NMI_IO_APIC) {
1730 printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
1734 apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
1736 disable_8259A_irq(0);
1737 irq_desc[0].chip = &lapic_irq_type;
1738 apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */
1739 enable_8259A_irq(0);
1741 if (timer_irq_works()) {
1742 apic_printk(APIC_VERBOSE," works.\n");
1745 apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
1746 apic_printk(APIC_VERBOSE," failed.\n");
1748 apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
1752 apic_write(APIC_LVT0, APIC_DM_EXTINT);
1754 unlock_ExtINT_logic();
1756 if (timer_irq_works()) {
1757 apic_printk(APIC_VERBOSE," works.\n");
1760 apic_printk(APIC_VERBOSE," failed :(.\n");
1761 panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
1764 static int __init notimercheck(char *s)
1769 __setup("no_timer_check", notimercheck);
1773 * IRQ's that are handled by the PIC in the MPS IOAPIC case.
1774 * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
1775 * Linux doesn't really care, as it's not actually used
1776 * for any interrupt handling anyway.
1778 #define PIC_IRQS (1<<2)
1780 void __init setup_IO_APIC(void)
1785 io_apic_irqs = ~0; /* all IRQs go through IOAPIC */
1787 io_apic_irqs = ~PIC_IRQS;
1789 apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
1792 setup_IO_APIC_irqs();
1793 init_IO_APIC_traps();
1799 struct sysfs_ioapic_data {
1800 struct sys_device dev;
1801 struct IO_APIC_route_entry entry[0];
1803 static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
1805 static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
1807 struct IO_APIC_route_entry *entry;
1808 struct sysfs_ioapic_data *data;
1811 data = container_of(dev, struct sysfs_ioapic_data, dev);
1812 entry = data->entry;
1813 for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
1814 *entry = ioapic_read_entry(dev->id, i);
1819 static int ioapic_resume(struct sys_device *dev)
1821 struct IO_APIC_route_entry *entry;
1822 struct sysfs_ioapic_data *data;
1823 unsigned long flags;
1824 union IO_APIC_reg_00 reg_00;
1827 data = container_of(dev, struct sysfs_ioapic_data, dev);
1828 entry = data->entry;
1830 spin_lock_irqsave(&ioapic_lock, flags);
1831 reg_00.raw = io_apic_read(dev->id, 0);
1832 if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
1833 reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
1834 io_apic_write(dev->id, 0, reg_00.raw);
1836 spin_unlock_irqrestore(&ioapic_lock, flags);
1837 for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
1838 ioapic_write_entry(dev->id, i, entry[i]);
1843 static struct sysdev_class ioapic_sysdev_class = {
1844 set_kset_name("ioapic"),
1845 .suspend = ioapic_suspend,
1846 .resume = ioapic_resume,
1849 static int __init ioapic_init_sysfs(void)
1851 struct sys_device * dev;
1854 error = sysdev_class_register(&ioapic_sysdev_class);
1858 for (i = 0; i < nr_ioapics; i++ ) {
1859 size = sizeof(struct sys_device) + nr_ioapic_registers[i]
1860 * sizeof(struct IO_APIC_route_entry);
1861 mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
1862 if (!mp_ioapic_data[i]) {
1863 printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
1866 dev = &mp_ioapic_data[i]->dev;
1868 dev->cls = &ioapic_sysdev_class;
1869 error = sysdev_register(dev);
1871 kfree(mp_ioapic_data[i]);
1872 mp_ioapic_data[i] = NULL;
1873 printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
1881 device_initcall(ioapic_init_sysfs);
1884 * Dynamic irq allocate and deallocation
1886 int create_irq(void)
1888 /* Allocate an unused irq */
1891 unsigned long flags;
1894 spin_lock_irqsave(&vector_lock, flags);
1895 for (new = (NR_IRQS - 1); new >= 0; new--) {
1896 if (platform_legacy_irq(new))
1898 if (irq_cfg[new].vector != 0)
1900 if (__assign_irq_vector(new, TARGET_CPUS) == 0)
1904 spin_unlock_irqrestore(&vector_lock, flags);
1907 dynamic_irq_init(irq);
1912 void destroy_irq(unsigned int irq)
1914 unsigned long flags;
1916 dynamic_irq_cleanup(irq);
1918 spin_lock_irqsave(&vector_lock, flags);
1919 __clear_irq_vector(irq);
1920 spin_unlock_irqrestore(&vector_lock, flags);
1924 * MSI mesage composition
1926 #ifdef CONFIG_PCI_MSI
1927 static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
1929 struct irq_cfg *cfg = irq_cfg + irq;
1935 err = assign_irq_vector(irq, tmp);
1937 cpus_and(tmp, cfg->domain, tmp);
1938 dest = cpu_mask_to_apicid(tmp);
1940 msg->address_hi = MSI_ADDR_BASE_HI;
1943 ((INT_DEST_MODE == 0) ?
1944 MSI_ADDR_DEST_MODE_PHYSICAL:
1945 MSI_ADDR_DEST_MODE_LOGICAL) |
1946 ((INT_DELIVERY_MODE != dest_LowestPrio) ?
1947 MSI_ADDR_REDIRECTION_CPU:
1948 MSI_ADDR_REDIRECTION_LOWPRI) |
1949 MSI_ADDR_DEST_ID(dest);
1952 MSI_DATA_TRIGGER_EDGE |
1953 MSI_DATA_LEVEL_ASSERT |
1954 ((INT_DELIVERY_MODE != dest_LowestPrio) ?
1955 MSI_DATA_DELIVERY_FIXED:
1956 MSI_DATA_DELIVERY_LOWPRI) |
1957 MSI_DATA_VECTOR(cfg->vector);
1963 static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
1965 struct irq_cfg *cfg = irq_cfg + irq;
1970 cpus_and(tmp, mask, cpu_online_map);
1971 if (cpus_empty(tmp))
1974 if (assign_irq_vector(irq, mask))
1977 cpus_and(tmp, cfg->domain, mask);
1978 dest = cpu_mask_to_apicid(tmp);
1980 read_msi_msg(irq, &msg);
1982 msg.data &= ~MSI_DATA_VECTOR_MASK;
1983 msg.data |= MSI_DATA_VECTOR(cfg->vector);
1984 msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
1985 msg.address_lo |= MSI_ADDR_DEST_ID(dest);
1987 write_msi_msg(irq, &msg);
1988 irq_desc[irq].affinity = mask;
1990 #endif /* CONFIG_SMP */
1993 * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
1994 * which implement the MSI or MSI-X Capability Structure.
1996 static struct irq_chip msi_chip = {
1998 .unmask = unmask_msi_irq,
1999 .mask = mask_msi_irq,
2000 .ack = ack_apic_edge,
2002 .set_affinity = set_msi_irq_affinity,
2004 .retrigger = ioapic_retrigger_irq,
2007 int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
2015 ret = msi_compose_msg(dev, irq, &msg);
2021 set_irq_msi(irq, desc);
2022 write_msi_msg(irq, &msg);
2024 set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
2029 void arch_teardown_msi_irq(unsigned int irq)
2034 #endif /* CONFIG_PCI_MSI */
2037 * Hypertransport interrupt support
2039 #ifdef CONFIG_HT_IRQ
2043 static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
2045 struct ht_irq_msg msg;
2046 fetch_ht_irq_msg(irq, &msg);
2048 msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
2049 msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
2051 msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
2052 msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
2054 write_ht_irq_msg(irq, &msg);
2057 static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
2059 struct irq_cfg *cfg = irq_cfg + irq;
2063 cpus_and(tmp, mask, cpu_online_map);
2064 if (cpus_empty(tmp))
2067 if (assign_irq_vector(irq, mask))
2070 cpus_and(tmp, cfg->domain, mask);
2071 dest = cpu_mask_to_apicid(tmp);
2073 target_ht_irq(irq, dest, cfg->vector);
2074 irq_desc[irq].affinity = mask;
2078 static struct irq_chip ht_irq_chip = {
2080 .mask = mask_ht_irq,
2081 .unmask = unmask_ht_irq,
2082 .ack = ack_apic_edge,
2084 .set_affinity = set_ht_irq_affinity,
2086 .retrigger = ioapic_retrigger_irq,
2089 int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
2091 struct irq_cfg *cfg = irq_cfg + irq;
2096 err = assign_irq_vector(irq, tmp);
2098 struct ht_irq_msg msg;
2101 cpus_and(tmp, cfg->domain, tmp);
2102 dest = cpu_mask_to_apicid(tmp);
2104 msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
2108 HT_IRQ_LOW_DEST_ID(dest) |
2109 HT_IRQ_LOW_VECTOR(cfg->vector) |
2110 ((INT_DEST_MODE == 0) ?
2111 HT_IRQ_LOW_DM_PHYSICAL :
2112 HT_IRQ_LOW_DM_LOGICAL) |
2113 HT_IRQ_LOW_RQEOI_EDGE |
2114 ((INT_DELIVERY_MODE != dest_LowestPrio) ?
2115 HT_IRQ_LOW_MT_FIXED :
2116 HT_IRQ_LOW_MT_ARBITRATED) |
2117 HT_IRQ_LOW_IRQ_MASKED;
2119 write_ht_irq_msg(irq, &msg);
2121 set_irq_chip_and_handler_name(irq, &ht_irq_chip,
2122 handle_edge_irq, "edge");
2126 #endif /* CONFIG_HT_IRQ */
2128 /* --------------------------------------------------------------------------
2129 ACPI-based IOAPIC Configuration
2130 -------------------------------------------------------------------------- */
2134 #define IO_APIC_MAX_ID 0xFE
2136 int __init io_apic_get_redir_entries (int ioapic)
2138 union IO_APIC_reg_01 reg_01;
2139 unsigned long flags;
2141 spin_lock_irqsave(&ioapic_lock, flags);
2142 reg_01.raw = io_apic_read(ioapic, 1);
2143 spin_unlock_irqrestore(&ioapic_lock, flags);
2145 return reg_01.bits.entries;
2149 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
2151 if (!IO_APIC_IRQ(irq)) {
2152 apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
2158 * IRQs < 16 are already in the irq_2_pin[] map
2161 add_pin_to_irq(irq, ioapic, pin);
2163 setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity);
2168 #endif /* CONFIG_ACPI */
2172 * This function currently is only a helper for the i386 smp boot process where
2173 * we need to reprogram the ioredtbls to cater for the cpus which have come online
2174 * so mask in all cases should simply be TARGET_CPUS
2177 void __init setup_ioapic_dest(void)
2179 int pin, ioapic, irq, irq_entry;
2181 if (skip_ioapic_setup == 1)
2184 for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
2185 for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
2186 irq_entry = find_irq_entry(ioapic, pin, mp_INT);
2187 if (irq_entry == -1)
2189 irq = pin_2_irq(irq_entry, ioapic, pin);
2191 /* setup_IO_APIC_irqs could fail to get vector for some device
2192 * when you have too many devices, because at that time only boot
2195 if (!irq_cfg[irq].vector)
2196 setup_IO_APIC_irq(ioapic, pin, irq,
2197 irq_trigger(irq_entry),
2198 irq_polarity(irq_entry));
2200 set_ioapic_affinity_irq(irq, TARGET_CPUS);