git.oblomov.eu Git - linux-2.6/blob - drivers/net/phy/phy_device.c

   1 /*
   2  * drivers/net/phy/phy_device.c
   3  *
   4  * Framework for finding and configuring PHYs.
   5  * Also contains generic PHY driver
   6  *
   7  * Author: Andy Fleming
   8  *
   9  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  10  *
  11  * This program is free software; you can redistribute  it and/or modify it
  12  * under  the terms of  the GNU General  Public License as published by the
  13  * Free Software Foundation;  either version 2 of the  License, or (at your
  14  * option) any later version.
  15  *
  16  */
  17 #include <linux/kernel.h>
  18 #include <linux/string.h>
  19 #include <linux/errno.h>
  20 #include <linux/unistd.h>
  21 #include <linux/slab.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/init.h>
  24 #include <linux/delay.h>
  25 #include <linux/netdevice.h>
  26 #include <linux/etherdevice.h>
  27 #include <linux/skbuff.h>
  28 #include <linux/spinlock.h>
  29 #include <linux/mm.h>
  30 #include <linux/module.h>
  31 #include <linux/mii.h>
  32 #include <linux/ethtool.h>
  33 #include <linux/phy.h>
  34
  35 #include <asm/io.h>
  36 #include <asm/irq.h>
  37 #include <asm/uaccess.h>
  38
  39 MODULE_DESCRIPTION("PHY library");
  40 MODULE_AUTHOR("Andy Fleming");
  41 MODULE_LICENSE("GPL");
  42
  43 static struct phy_driver genphy_driver;
  44 extern int mdio_bus_init(void);
  45 extern void mdio_bus_exit(void);
  46
  47 struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
  48 {
  49         struct phy_device *dev;
  50         /* We allocate the device, and initialize the
  51          * default values */
  52         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
  53
  54         if (NULL == dev)
  55                 return (struct phy_device*) PTR_ERR((void*)-ENOMEM);
  56
  57         dev->speed = 0;
  58         dev->duplex = -1;
  59         dev->pause = dev->asym_pause = 0;
  60         dev->link = 1;
  61         dev->interface = PHY_INTERFACE_MODE_GMII;
  62
  63         dev->autoneg = AUTONEG_ENABLE;
  64
  65         dev->addr = addr;
  66         dev->phy_id = phy_id;
  67         dev->bus = bus;
  68
  69         dev->state = PHY_DOWN;
  70
  71         spin_lock_init(&dev->lock);
  72
  73         return dev;
  74 }
  75 EXPORT_SYMBOL(phy_device_create);
  76
  77 /* get_phy_device
  78  *
  79  * description: Reads the ID registers of the PHY at addr on the
  80  *   bus, then allocates and returns the phy_device to
  81  *   represent it.
  82  */
  83 struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
  84 {
  85         int phy_reg;
  86         u32 phy_id;
  87         struct phy_device *dev = NULL;
  88
  89         /* Grab the bits from PHYIR1, and put them
  90          * in the upper half */
  91         phy_reg = bus->read(bus, addr, MII_PHYSID1);
  92
  93         if (phy_reg < 0)
  94                 return ERR_PTR(phy_reg);
  95
  96         phy_id = (phy_reg & 0xffff) << 16;
  97
  98         /* Grab the bits from PHYIR2, and put them in the lower half */
  99         phy_reg = bus->read(bus, addr, MII_PHYSID2);
 100
 101         if (phy_reg < 0)
 102                 return ERR_PTR(phy_reg);
 103
 104         phy_id |= (phy_reg & 0xffff);
 105
 106         /* If the phy_id is all Fs, there is no device there */
 107         if (0xffffffff == phy_id)
 108                 return NULL;
 109
 110         dev = phy_device_create(bus, addr, phy_id);
 111
 112         return dev;
 113 }
 114
 115 /* phy_prepare_link:
 116  *
 117  * description: Tells the PHY infrastructure to handle the
 118  *   gory details on monitoring link status (whether through
 119  *   polling or an interrupt), and to call back to the
 120  *   connected device driver when the link status changes.
 121  *   If you want to monitor your own link state, don't call
 122  *   this function */
 123 void phy_prepare_link(struct phy_device *phydev,
 124                 void (*handler)(struct net_device *))
 125 {
 126         phydev->adjust_link = handler;
 127 }
 128
 129 /* phy_connect:
 130  *
 131  * description: Convenience function for connecting ethernet
 132  *   devices to PHY devices.  The default behavior is for
 133  *   the PHY infrastructure to handle everything, and only notify
 134  *   the connected driver when the link status changes.  If you
 135  *   don't want, or can't use the provided functionality, you may
 136  *   choose to call only the subset of functions which provide
 137  *   the desired functionality.
 138  */
 139 struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
 140                 void (*handler)(struct net_device *), u32 flags,
 141                 phy_interface_t interface)
 142 {
 143         struct phy_device *phydev;
 144
 145         phydev = phy_attach(dev, phy_id, flags, interface);
 146
 147         if (IS_ERR(phydev))
 148                 return phydev;
 149
 150         phy_prepare_link(phydev, handler);
 151
 152         phy_start_machine(phydev, NULL);
 153
 154         if (phydev->irq > 0)
 155                 phy_start_interrupts(phydev);
 156
 157         return phydev;
 158 }
 159 EXPORT_SYMBOL(phy_connect);
 160
 161 void phy_disconnect(struct phy_device *phydev)
 162 {
 163         if (phydev->irq > 0)
 164                 phy_stop_interrupts(phydev);
 165
 166         phy_stop_machine(phydev);
 167
 168         phydev->adjust_link = NULL;
 169
 170         phy_detach(phydev);
 171 }
 172 EXPORT_SYMBOL(phy_disconnect);
 173
 174 /* phy_attach:
 175  *
 176  *   description: Called by drivers to attach to a particular PHY
 177  *     device. The phy_device is found, and properly hooked up
 178  *     to the phy_driver.  If no driver is attached, then the
 179  *     genphy_driver is used.  The phy_device is given a ptr to
 180  *     the attaching device, and given a callback for link status
 181  *     change.  The phy_device is returned to the attaching
 182  *     driver.
 183  */
 184 static int phy_compare_id(struct device *dev, void *data)
 185 {
 186         return strcmp((char *)data, dev->bus_id) ? 0 : 1;
 187 }
 188
 189 struct phy_device *phy_attach(struct net_device *dev,
 190                 const char *phy_id, u32 flags, phy_interface_t interface)
 191 {
 192         struct bus_type *bus = &mdio_bus_type;
 193         struct phy_device *phydev;
 194         struct device *d;
 195
 196         /* Search the list of PHY devices on the mdio bus for the
 197          * PHY with the requested name */
 198         d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
 199
 200         if (d) {
 201                 phydev = to_phy_device(d);
 202         } else {
 203                 printk(KERN_ERR "%s not found\n", phy_id);
 204                 return ERR_PTR(-ENODEV);
 205         }
 206
 207         /* Assume that if there is no driver, that it doesn't
 208          * exist, and we should use the genphy driver. */
 209         if (NULL == d->driver) {
 210                 int err;
 211                 down_write(&d->bus->subsys.rwsem);
 212                 d->driver = &genphy_driver.driver;
 213
 214                 err = d->driver->probe(d);
 215
 216                 if (err >= 0)
 217                         err = device_bind_driver(d);
 218
 219                 up_write(&d->bus->subsys.rwsem);
 220
 221                 if (err)
 222                         return ERR_PTR(err);
 223         }
 224
 225         if (phydev->attached_dev) {
 226                 printk(KERN_ERR "%s: %s already attached\n",
 227                                 dev->name, phy_id);
 228                 return ERR_PTR(-EBUSY);
 229         }
 230
 231         phydev->attached_dev = dev;
 232
 233         phydev->dev_flags = flags;
 234
 235         phydev->interface = interface;
 236
 237         /* Do initial configuration here, now that
 238          * we have certain key parameters
 239          * (dev_flags and interface) */
 240         if (phydev->drv->config_init) {
 241                 int err;
 242
 243                 err = phydev->drv->config_init(phydev);
 244
 245                 if (err < 0)
 246                         return ERR_PTR(err);
 247         }
 248
 249         return phydev;
 250 }
 251 EXPORT_SYMBOL(phy_attach);
 252
 253 void phy_detach(struct phy_device *phydev)
 254 {
 255         phydev->attached_dev = NULL;
 256
 257         /* If the device had no specific driver before (i.e. - it
 258          * was using the generic driver), we unbind the device
 259          * from the generic driver so that there's a chance a
 260          * real driver could be loaded */
 261         if (phydev->dev.driver == &genphy_driver.driver) {
 262                 down_write(&phydev->dev.bus->subsys.rwsem);
 263                 device_release_driver(&phydev->dev);
 264                 up_write(&phydev->dev.bus->subsys.rwsem);
 265         }
 266 }
 267 EXPORT_SYMBOL(phy_detach);
 268
 269
 270 /* Generic PHY support and helper functions */
 271
 272 /* genphy_config_advert
 273  *
 274  * description: Writes MII_ADVERTISE with the appropriate values,
 275  *   after sanitizing the values to make sure we only advertise
 276  *   what is supported
 277  */
 278 int genphy_config_advert(struct phy_device *phydev)
 279 {
 280         u32 advertise;
 281         int adv;
 282         int err;
 283
 284         /* Only allow advertising what
 285          * this PHY supports */
 286         phydev->advertising &= phydev->supported;
 287         advertise = phydev->advertising;
 288
 289         /* Setup standard advertisement */
 290         adv = phy_read(phydev, MII_ADVERTISE);
 291
 292         if (adv < 0)
 293                 return adv;
 294
 295         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
 296                  ADVERTISE_PAUSE_ASYM);
 297         if (advertise & ADVERTISED_10baseT_Half)
 298                 adv |= ADVERTISE_10HALF;
 299         if (advertise & ADVERTISED_10baseT_Full)
 300                 adv |= ADVERTISE_10FULL;
 301         if (advertise & ADVERTISED_100baseT_Half)
 302                 adv |= ADVERTISE_100HALF;
 303         if (advertise & ADVERTISED_100baseT_Full)
 304                 adv |= ADVERTISE_100FULL;
 305         if (advertise & ADVERTISED_Pause)
 306                 adv |= ADVERTISE_PAUSE_CAP;
 307         if (advertise & ADVERTISED_Asym_Pause)
 308                 adv |= ADVERTISE_PAUSE_ASYM;
 309
 310         err = phy_write(phydev, MII_ADVERTISE, adv);
 311
 312         if (err < 0)
 313                 return err;
 314
 315         /* Configure gigabit if it's supported */
 316         if (phydev->supported & (SUPPORTED_1000baseT_Half |
 317                                 SUPPORTED_1000baseT_Full)) {
 318                 adv = phy_read(phydev, MII_CTRL1000);
 319
 320                 if (adv < 0)
 321                         return adv;
 322
 323                 adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 324                 if (advertise & SUPPORTED_1000baseT_Half)
 325                         adv |= ADVERTISE_1000HALF;
 326                 if (advertise & SUPPORTED_1000baseT_Full)
 327                         adv |= ADVERTISE_1000FULL;
 328                 err = phy_write(phydev, MII_CTRL1000, adv);
 329
 330                 if (err < 0)
 331                         return err;
 332         }
 333
 334         return adv;
 335 }
 336 EXPORT_SYMBOL(genphy_config_advert);
 337
 338 /* genphy_setup_forced
 339  *
 340  * description: Configures MII_BMCR to force speed/duplex
 341  *   to the values in phydev. Assumes that the values are valid.
 342  *   Please see phy_sanitize_settings() */
 343 int genphy_setup_forced(struct phy_device *phydev)
 344 {
 345         int ctl = BMCR_RESET;
 346
 347         phydev->pause = phydev->asym_pause = 0;
 348
 349         if (SPEED_1000 == phydev->speed)
 350                 ctl |= BMCR_SPEED1000;
 351         else if (SPEED_100 == phydev->speed)
 352                 ctl |= BMCR_SPEED100;
 353
 354         if (DUPLEX_FULL == phydev->duplex)
 355                 ctl |= BMCR_FULLDPLX;
 356
 357         ctl = phy_write(phydev, MII_BMCR, ctl);
 358
 359         if (ctl < 0)
 360                 return ctl;
 361
 362         /* We just reset the device, so we'd better configure any
 363          * settings the PHY requires to operate */
 364         if (phydev->drv->config_init)
 365                 ctl = phydev->drv->config_init(phydev);
 366
 367         return ctl;
 368 }
 369
 370
 371 /* Enable and Restart Autonegotiation */
 372 int genphy_restart_aneg(struct phy_device *phydev)
 373 {
 374         int ctl;
 375
 376         ctl = phy_read(phydev, MII_BMCR);
 377
 378         if (ctl < 0)
 379                 return ctl;
 380
 381         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 382
 383         /* Don't isolate the PHY if we're negotiating */
 384         ctl &= ~(BMCR_ISOLATE);
 385
 386         ctl = phy_write(phydev, MII_BMCR, ctl);
 387
 388         return ctl;
 389 }
 390
 391
 392 /* genphy_config_aneg
 393  *
 394  * description: If auto-negotiation is enabled, we configure the
 395  *   advertising, and then restart auto-negotiation.  If it is not
 396  *   enabled, then we write the BMCR
 397  */
 398 int genphy_config_aneg(struct phy_device *phydev)
 399 {
 400         int err = 0;
 401
 402         if (AUTONEG_ENABLE == phydev->autoneg) {
 403                 err = genphy_config_advert(phydev);
 404
 405                 if (err < 0)
 406                         return err;
 407
 408                 err = genphy_restart_aneg(phydev);
 409         } else
 410                 err = genphy_setup_forced(phydev);
 411
 412         return err;
 413 }
 414 EXPORT_SYMBOL(genphy_config_aneg);
 415
 416 /* genphy_update_link
 417  *
 418  * description: Update the value in phydev->link to reflect the
 419  *   current link value.  In order to do this, we need to read
 420  *   the status register twice, keeping the second value
 421  */
 422 int genphy_update_link(struct phy_device *phydev)
 423 {
 424         int status;
 425
 426         /* Do a fake read */
 427         status = phy_read(phydev, MII_BMSR);
 428
 429         if (status < 0)
 430                 return status;
 431
 432         /* Read link and autonegotiation status */
 433         status = phy_read(phydev, MII_BMSR);
 434
 435         if (status < 0)
 436                 return status;
 437
 438         if ((status & BMSR_LSTATUS) == 0)
 439                 phydev->link = 0;
 440         else
 441                 phydev->link = 1;
 442
 443         return 0;
 444 }
 445 EXPORT_SYMBOL(genphy_update_link);
 446
 447 /* genphy_read_status
 448  *
 449  * description: Check the link, then figure out the current state
 450  *   by comparing what we advertise with what the link partner
 451  *   advertises.  Start by checking the gigabit possibilities,
 452  *   then move on to 10/100.
 453  */
 454 int genphy_read_status(struct phy_device *phydev)
 455 {
 456         int adv;
 457         int err;
 458         int lpa;
 459         int lpagb = 0;
 460
 461         /* Update the link, but return if there
 462          * was an error */
 463         err = genphy_update_link(phydev);
 464         if (err)
 465                 return err;
 466
 467         if (AUTONEG_ENABLE == phydev->autoneg) {
 468                 if (phydev->supported & (SUPPORTED_1000baseT_Half
 469                                         | SUPPORTED_1000baseT_Full)) {
 470                         lpagb = phy_read(phydev, MII_STAT1000);
 471
 472                         if (lpagb < 0)
 473                                 return lpagb;
 474
 475                         adv = phy_read(phydev, MII_CTRL1000);
 476
 477                         if (adv < 0)
 478                                 return adv;
 479
 480                         lpagb &= adv << 2;
 481                 }
 482
 483                 lpa = phy_read(phydev, MII_LPA);
 484
 485                 if (lpa < 0)
 486                         return lpa;
 487
 488                 adv = phy_read(phydev, MII_ADVERTISE);
 489
 490                 if (adv < 0)
 491                         return adv;
 492
 493                 lpa &= adv;
 494
 495                 phydev->speed = SPEED_10;
 496                 phydev->duplex = DUPLEX_HALF;
 497                 phydev->pause = phydev->asym_pause = 0;
 498
 499                 if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
 500                         phydev->speed = SPEED_1000;
 501
 502                         if (lpagb & LPA_1000FULL)
 503                                 phydev->duplex = DUPLEX_FULL;
 504                 } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
 505                         phydev->speed = SPEED_100;
 506
 507                         if (lpa & LPA_100FULL)
 508                                 phydev->duplex = DUPLEX_FULL;
 509                 } else
 510                         if (lpa & LPA_10FULL)
 511                                 phydev->duplex = DUPLEX_FULL;
 512
 513                 if (phydev->duplex == DUPLEX_FULL){
 514                         phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 515                         phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 516                 }
 517         } else {
 518                 int bmcr = phy_read(phydev, MII_BMCR);
 519                 if (bmcr < 0)
 520                         return bmcr;
 521
 522                 if (bmcr & BMCR_FULLDPLX)
 523                         phydev->duplex = DUPLEX_FULL;
 524                 else
 525                         phydev->duplex = DUPLEX_HALF;
 526
 527                 if (bmcr & BMCR_SPEED1000)
 528                         phydev->speed = SPEED_1000;
 529                 else if (bmcr & BMCR_SPEED100)
 530                         phydev->speed = SPEED_100;
 531                 else
 532                         phydev->speed = SPEED_10;
 533
 534                 phydev->pause = phydev->asym_pause = 0;
 535         }
 536
 537         return 0;
 538 }
 539 EXPORT_SYMBOL(genphy_read_status);
 540
 541 static int genphy_config_init(struct phy_device *phydev)
 542 {
 543         int val;
 544         u32 features;
 545
 546         /* For now, I'll claim that the generic driver supports
 547          * all possible port types */
 548         features = (SUPPORTED_TP | SUPPORTED_MII
 549                         | SUPPORTED_AUI | SUPPORTED_FIBRE |
 550                         SUPPORTED_BNC);
 551
 552         /* Do we support autonegotiation? */
 553         val = phy_read(phydev, MII_BMSR);
 554
 555         if (val < 0)
 556                 return val;
 557
 558         if (val & BMSR_ANEGCAPABLE)
 559                 features |= SUPPORTED_Autoneg;
 560
 561         if (val & BMSR_100FULL)
 562                 features |= SUPPORTED_100baseT_Full;
 563         if (val & BMSR_100HALF)
 564                 features |= SUPPORTED_100baseT_Half;
 565         if (val & BMSR_10FULL)
 566                 features |= SUPPORTED_10baseT_Full;
 567         if (val & BMSR_10HALF)
 568                 features |= SUPPORTED_10baseT_Half;
 569
 570         if (val & BMSR_ESTATEN) {
 571                 val = phy_read(phydev, MII_ESTATUS);
 572
 573                 if (val < 0)
 574                         return val;
 575
 576                 if (val & ESTATUS_1000_TFULL)
 577                         features |= SUPPORTED_1000baseT_Full;
 578                 if (val & ESTATUS_1000_THALF)
 579                         features |= SUPPORTED_1000baseT_Half;
 580         }
 581
 582         phydev->supported = features;
 583         phydev->advertising = features;
 584
 585         return 0;
 586 }
 587
 588
 589 /* phy_probe
 590  *
 591  * description: Take care of setting up the phy_device structure,
 592  *   set the state to READY (the driver's init function should
 593  *   set it to STARTING if needed).
 594  */
 595 static int phy_probe(struct device *dev)
 596 {
 597         struct phy_device *phydev;
 598         struct phy_driver *phydrv;
 599         struct device_driver *drv;
 600         int err = 0;
 601
 602         phydev = to_phy_device(dev);
 603
 604         /* Make sure the driver is held.
 605          * XXX -- Is this correct? */
 606         drv = get_driver(phydev->dev.driver);
 607         phydrv = to_phy_driver(drv);
 608         phydev->drv = phydrv;
 609
 610         /* Disable the interrupt if the PHY doesn't support it */
 611         if (!(phydrv->flags & PHY_HAS_INTERRUPT))
 612                 phydev->irq = PHY_POLL;
 613
 614         spin_lock(&phydev->lock);
 615
 616         /* Start out supporting everything. Eventually,
 617          * a controller will attach, and may modify one
 618          * or both of these values */
 619         phydev->supported = phydrv->features;
 620         phydev->advertising = phydrv->features;
 621
 622         /* Set the state to READY by default */
 623         phydev->state = PHY_READY;
 624
 625         if (phydev->drv->probe)
 626                 err = phydev->drv->probe(phydev);
 627
 628         spin_unlock(&phydev->lock);
 629
 630         return err;
 631
 632 }
 633
 634 static int phy_remove(struct device *dev)
 635 {
 636         struct phy_device *phydev;
 637
 638         phydev = to_phy_device(dev);
 639
 640         spin_lock(&phydev->lock);
 641         phydev->state = PHY_DOWN;
 642         spin_unlock(&phydev->lock);
 643
 644         if (phydev->drv->remove)
 645                 phydev->drv->remove(phydev);
 646
 647         put_driver(dev->driver);
 648         phydev->drv = NULL;
 649
 650         return 0;
 651 }
 652
 653 int phy_driver_register(struct phy_driver *new_driver)
 654 {
 655         int retval;
 656
 657         memset(&new_driver->driver, 0, sizeof(new_driver->driver));
 658         new_driver->driver.name = new_driver->name;
 659         new_driver->driver.bus = &mdio_bus_type;
 660         new_driver->driver.probe = phy_probe;
 661         new_driver->driver.remove = phy_remove;
 662
 663         retval = driver_register(&new_driver->driver);
 664
 665         if (retval) {
 666                 printk(KERN_ERR "%s: Error %d in registering driver\n",
 667                                 new_driver->name, retval);
 668
 669                 return retval;
 670         }
 671
 672         pr_info("%s: Registered new driver\n", new_driver->name);
 673
 674         return 0;
 675 }
 676 EXPORT_SYMBOL(phy_driver_register);
 677
 678 void phy_driver_unregister(struct phy_driver *drv)
 679 {
 680         driver_unregister(&drv->driver);
 681 }
 682 EXPORT_SYMBOL(phy_driver_unregister);
 683
 684 static struct phy_driver genphy_driver = {
 685         .phy_id         = 0xffffffff,
 686         .phy_id_mask    = 0xffffffff,
 687         .name           = "Generic PHY",
 688         .config_init    = genphy_config_init,
 689         .features       = 0,
 690         .config_aneg    = genphy_config_aneg,
 691         .read_status    = genphy_read_status,
 692         .driver         = {.owner= THIS_MODULE, },
 693 };
 694
 695 static int __init phy_init(void)
 696 {
 697         int rc;
 698
 699         rc = mdio_bus_init();
 700         if (rc)
 701                 return rc;
 702
 703         rc = phy_driver_register(&genphy_driver);
 704         if (rc)
 705                 mdio_bus_exit();
 706
 707         return rc;
 708 }
 709
 710 static void __exit phy_exit(void)
 711 {
 712         phy_driver_unregister(&genphy_driver);
 713         mdio_bus_exit();
 714 }
 715
 716 subsys_initcall(phy_init);
 717 module_exit(phy_exit);