git.oblomov.eu Git - linux-2.6/blob - drivers/char/isicom.c

   1 /*
   2  *      This program is free software; you can redistribute it and/or
   3  *      modify it under the terms of the GNU General Public License
   4  *      as published by the Free Software Foundation; either version
   5  *      2 of the License, or (at your option) any later version.
   6  *
   7  *      Original driver code supplied by Multi-Tech
   8  *
   9  *      Changes
  10  *      1/9/98  alan@redhat.com         Merge to 2.0.x kernel tree
  11  *                                      Obtain and use official major/minors
  12  *                                      Loader switched to a misc device
  13  *                                      (fixed range check bug as a side effect)
  14  *                                      Printk clean up
  15  *      9/12/98 alan@redhat.com         Rough port to 2.1.x
  16  *
  17  *      10/6/99 sameer                  Merged the ISA and PCI drivers to
  18  *                                      a new unified driver.
  19  *
  20  *      3/9/99  sameer                  Added support for ISI4616 cards.
  21  *
  22  *      16/9/99 sameer                  We do not force RTS low anymore.
  23  *                                      This is to prevent the firmware
  24  *                                      from getting confused.
  25  *
  26  *      26/10/99 sameer                 Cosmetic changes:The driver now
  27  *                                      dumps the Port Count information
  28  *                                      along with I/O address and IRQ.
  29  *
  30  *      13/12/99 sameer                 Fixed the problem with IRQ sharing.
  31  *
  32  *      10/5/00  sameer                 Fixed isicom_shutdown_board()
  33  *                                      to not lower DTR on all the ports
  34  *                                      when the last port on the card is
  35  *                                      closed.
  36  *
  37  *      10/5/00  sameer                 Signal mask setup command added
  38  *                                      to  isicom_setup_port and
  39  *                                      isicom_shutdown_port.
  40  *
  41  *      24/5/00  sameer                 The driver is now SMP aware.
  42  *
  43  *
  44  *      27/11/00 Vinayak P Risbud       Fixed the Driver Crash Problem
  45  *
  46  *
  47  *      03/01/01  anil .s               Added support for resetting the
  48  *                                      internal modems on ISI cards.
  49  *
  50  *      08/02/01  anil .s               Upgraded the driver for kernel
  51  *                                      2.4.x
  52  *
  53  *      11/04/01  Kevin                 Fixed firmware load problem with
  54  *                                      ISIHP-4X card
  55  *
  56  *      30/04/01  anil .s               Fixed the remote login through
  57  *                                      ISI port problem. Now the link
  58  *                                      does not go down before password
  59  *                                      prompt.
  60  *
  61  *      03/05/01  anil .s               Fixed the problem with IRQ sharing
  62  *                                      among ISI-PCI cards.
  63  *
  64  *      03/05/01  anil .s               Added support to display the version
  65  *                                      info during insmod as well as module
  66  *                                      listing by lsmod.
  67  *
  68  *      10/05/01  anil .s               Done the modifications to the source
  69  *                                      file and Install script so that the
  70  *                                      same installation can be used for
  71  *                                      2.2.x and 2.4.x kernel.
  72  *
  73  *      06/06/01  anil .s               Now we drop both dtr and rts during
  74  *                                      shutdown_port as well as raise them
  75  *                                      during isicom_config_port.
  76  *
  77  *      09/06/01 acme@conectiva.com.br  use capable, not suser, do
  78  *                                      restore_flags on failure in
  79  *                                      isicom_send_break, verify put_user
  80  *                                      result
  81  *
  82  *      11/02/03  ranjeeth              Added support for 230 Kbps and 460 Kbps
  83  *                                      Baud index extended to 21
  84  *
  85  *      20/03/03  ranjeeth              Made to work for Linux Advanced server.
  86  *                                      Taken care of license warning.
  87  *
  88  *      10/12/03  Ravindra              Made to work for Fedora Core 1 of
  89  *                                      Red Hat Distribution
  90  *
  91  *      06/01/05  Alan Cox              Merged the ISI and base kernel strands
  92  *                                      into a single 2.6 driver
  93  *
  94  *      ***********************************************************
  95  *
  96  *      To use this driver you also need the support package. You
  97  *      can find this in RPM format on
  98  *              ftp://ftp.linux.org.uk/pub/linux/alan
  99  *
 100  *      You can find the original tools for this direct from Multitech
 101  *              ftp://ftp.multitech.com/ISI-Cards/
 102  *
 103  *      Having installed the cards the module options (/etc/modprobe.conf)
 104  *
 105  *      options isicom   io=card1,card2,card3,card4 irq=card1,card2,card3,card4
 106  *
 107  *      Omit those entries for boards you don't have installed.
 108  *
 109  *      TODO
 110  *              Merge testing
 111  *              64-bit verification
 112  */
 113
 114 #include <linux/module.h>
 115 #include <linux/firmware.h>
 116 #include <linux/kernel.h>
 117 #include <linux/tty.h>
 118 #include <linux/tty_flip.h>
 119 #include <linux/termios.h>
 120 #include <linux/fs.h>
 121 #include <linux/sched.h>
 122 #include <linux/serial.h>
 123 #include <linux/mm.h>
 124 #include <linux/interrupt.h>
 125 #include <linux/timer.h>
 126 #include <linux/delay.h>
 127 #include <linux/ioport.h>
 128
 129 #include <asm/uaccess.h>
 130 #include <asm/io.h>
 131 #include <asm/system.h>
 132
 133 #include <linux/pci.h>
 134
 135 #include <linux/isicom.h>
 136
 137 #define InterruptTheCard(base) outw(0, (base) + 0xc)
 138 #define ClearInterrupt(base) inw((base) + 0x0a)
 139
 140 #ifdef DEBUG
 141 #define pr_dbg(str...) printk(KERN_DEBUG "ISICOM: " str)
 142 #define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
 143 #else
 144 #define pr_dbg(str...) do { } while (0)
 145 #define isicom_paranoia_check(a, b, c) 0
 146 #endif
 147
 148 static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
 149 static void __devexit isicom_remove(struct pci_dev *);
 150
 151 static struct pci_device_id isicom_pci_tbl[] = {
 152         { PCI_DEVICE(VENDOR_ID, 0x2028) },
 153         { PCI_DEVICE(VENDOR_ID, 0x2051) },
 154         { PCI_DEVICE(VENDOR_ID, 0x2052) },
 155         { PCI_DEVICE(VENDOR_ID, 0x2053) },
 156         { PCI_DEVICE(VENDOR_ID, 0x2054) },
 157         { PCI_DEVICE(VENDOR_ID, 0x2055) },
 158         { PCI_DEVICE(VENDOR_ID, 0x2056) },
 159         { PCI_DEVICE(VENDOR_ID, 0x2057) },
 160         { PCI_DEVICE(VENDOR_ID, 0x2058) },
 161         { 0 }
 162 };
 163 MODULE_DEVICE_TABLE(pci, isicom_pci_tbl);
 164
 165 static struct pci_driver isicom_driver = {
 166         .name           = "isicom",
 167         .id_table       = isicom_pci_tbl,
 168         .probe          = isicom_probe,
 169         .remove         = __devexit_p(isicom_remove)
 170 };
 171
 172 static int prev_card = 3;       /*      start servicing isi_card[0]     */
 173 static struct tty_driver *isicom_normal;
 174
 175 static struct timer_list tx;
 176 static char re_schedule = 1;
 177
 178 static void isicom_tx(unsigned long _data);
 179 static void isicom_start(struct tty_struct *tty);
 180
 181 /*   baud index mappings from linux defns to isi */
 182
 183 static signed char linuxb_to_isib[] = {
 184         -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19
 185 };
 186
 187 struct  isi_board {
 188         unsigned long           base;
 189         unsigned char           irq;
 190         unsigned char           port_count;
 191         unsigned short          status;
 192         unsigned short          port_status; /* each bit for each port */
 193         unsigned short          shift_count;
 194         struct isi_port         * ports;
 195         signed char             count;
 196         unsigned char           isa;
 197         spinlock_t              card_lock; /* Card wide lock 11/5/00 -sameer */
 198         unsigned long           flags;
 199 };
 200
 201 struct  isi_port {
 202         unsigned short          magic;
 203         unsigned int            flags;
 204         int                     count;
 205         int                     blocked_open;
 206         int                     close_delay;
 207         u16                     channel;
 208         u16                     status;
 209         u16                     closing_wait;
 210         struct isi_board        * card;
 211         struct tty_struct       * tty;
 212         wait_queue_head_t       close_wait;
 213         wait_queue_head_t       open_wait;
 214         struct work_struct      hangup_tq;
 215         struct work_struct      bh_tqueue;
 216         unsigned char           * xmit_buf;
 217         int                     xmit_head;
 218         int                     xmit_tail;
 219         int                     xmit_cnt;
 220 };
 221
 222 static struct isi_board isi_card[BOARD_COUNT];
 223 static struct isi_port  isi_ports[PORT_COUNT];
 224
 225 /*
 226  *      Locking functions for card level locking. We need to own both
 227  *      the kernel lock for the card and have the card in a position that
 228  *      it wants to talk.
 229  */
 230
 231 static int lock_card(struct isi_board *card)
 232 {
 233         char            retries;
 234         unsigned long base = card->base;
 235
 236         for (retries = 0; retries < 100; retries++) {
 237                 spin_lock_irqsave(&card->card_lock, card->flags);
 238                 if (inw(base + 0xe) & 0x1) {
 239                         return 1;
 240                 } else {
 241                         spin_unlock_irqrestore(&card->card_lock, card->flags);
 242                         udelay(1000);   /* 1ms */
 243                 }
 244         }
 245         printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
 246                 card->base);
 247
 248         return 0;       /* Failed to aquire the card! */
 249 }
 250
 251 static int lock_card_at_interrupt(struct isi_board *card)
 252 {
 253         unsigned char           retries;
 254         unsigned long base = card->base;
 255
 256         for (retries = 0; retries < 200; retries++) {
 257                 spin_lock_irqsave(&card->card_lock, card->flags);
 258
 259                 if (inw(base + 0xe) & 0x1)
 260                         return 1;
 261                 else
 262                         spin_unlock_irqrestore(&card->card_lock, card->flags);
 263         }
 264         /* Failing in interrupt is an acceptable event */
 265         return 0;       /* Failed to aquire the card! */
 266 }
 267
 268 static void unlock_card(struct isi_board *card)
 269 {
 270         spin_unlock_irqrestore(&card->card_lock, card->flags);
 271 }
 272
 273 /*
 274  *  ISI Card specific ops ...
 275  */
 276
 277 static void raise_dtr(struct isi_port *port)
 278 {
 279         struct isi_board *card = port->card;
 280         unsigned long base = card->base;
 281         u16 channel = port->channel;
 282
 283         if (!lock_card(card))
 284                 return;
 285
 286         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 287         outw(0x0504, base);
 288         InterruptTheCard(base);
 289         port->status |= ISI_DTR;
 290         unlock_card(card);
 291 }
 292
 293 static inline void drop_dtr(struct isi_port *port)
 294 {
 295         struct isi_board *card = port->card;
 296         unsigned long base = card->base;
 297         u16 channel = port->channel;
 298
 299         if (!lock_card(card))
 300                 return;
 301
 302         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 303         outw(0x0404, base);
 304         InterruptTheCard(base);
 305         port->status &= ~ISI_DTR;
 306         unlock_card(card);
 307 }
 308
 309 static inline void raise_rts(struct isi_port *port)
 310 {
 311         struct isi_board *card = port->card;
 312         unsigned long base = card->base;
 313         u16 channel = port->channel;
 314
 315         if (!lock_card(card))
 316                 return;
 317
 318         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 319         outw(0x0a04, base);
 320         InterruptTheCard(base);
 321         port->status |= ISI_RTS;
 322         unlock_card(card);
 323 }
 324 static inline void drop_rts(struct isi_port *port)
 325 {
 326         struct isi_board *card = port->card;
 327         unsigned long base = card->base;
 328         u16 channel = port->channel;
 329
 330         if (!lock_card(card))
 331                 return;
 332
 333         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 334         outw(0x0804, base);
 335         InterruptTheCard(base);
 336         port->status &= ~ISI_RTS;
 337         unlock_card(card);
 338 }
 339
 340 static inline void raise_dtr_rts(struct isi_port *port)
 341 {
 342         struct isi_board *card = port->card;
 343         unsigned long base = card->base;
 344         u16 channel = port->channel;
 345
 346         if (!lock_card(card))
 347                 return;
 348
 349         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 350         outw(0x0f04, base);
 351         InterruptTheCard(base);
 352         port->status |= (ISI_DTR | ISI_RTS);
 353         unlock_card(card);
 354 }
 355
 356 static void drop_dtr_rts(struct isi_port *port)
 357 {
 358         struct isi_board *card = port->card;
 359         unsigned long base = card->base;
 360         u16 channel = port->channel;
 361
 362         if (!lock_card(card))
 363                 return;
 364
 365         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 366         outw(0x0c04, base);
 367         InterruptTheCard(base);
 368         port->status &= ~(ISI_RTS | ISI_DTR);
 369         unlock_card(card);
 370 }
 371
 372 static inline void kill_queue(struct isi_port *port, short queue)
 373 {
 374         struct isi_board *card = port->card;
 375         unsigned long base = card->base;
 376         u16 channel = port->channel;
 377
 378         if (!lock_card(card))
 379                 return;
 380
 381         outw(0x8000 | (channel << card->shift_count) | 0x02, base);
 382         outw((queue << 8) | 0x06, base);
 383         InterruptTheCard(base);
 384         unlock_card(card);
 385 }
 386
 387 /*
 388  *      ISICOM Driver specific routines ...
 389  *
 390  */
 391
 392 static inline int __isicom_paranoia_check(struct isi_port const *port,
 393         char *name, const char *routine)
 394 {
 395         if (!port) {
 396                 printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for "
 397                         "dev %s in %s.\n", name, routine);
 398                 return 1;
 399         }
 400         if (port->magic != ISICOM_MAGIC) {
 401                 printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for "
 402                         "dev %s in %s.\n", name, routine);
 403                 return 1;
 404         }
 405
 406         return 0;
 407 }
 408
 409 /*
 410  *      Transmitter.
 411  *
 412  *      We shovel data into the card buffers on a regular basis. The card
 413  *      will do the rest of the work for us.
 414  */
 415
 416 static void isicom_tx(unsigned long _data)
 417 {
 418         short count = (BOARD_COUNT-1), card, base;
 419         short txcount, wrd, residue, word_count, cnt;
 420         struct isi_port *port;
 421         struct tty_struct *tty;
 422
 423         /*      find next active board  */
 424         card = (prev_card + 1) & 0x0003;
 425         while(count-- > 0) {
 426                 if (isi_card[card].status & BOARD_ACTIVE)
 427                         break;
 428                 card = (card + 1) & 0x0003;
 429         }
 430         if (!(isi_card[card].status & BOARD_ACTIVE))
 431                 goto sched_again;
 432
 433         prev_card = card;
 434
 435         count = isi_card[card].port_count;
 436         port = isi_card[card].ports;
 437         base = isi_card[card].base;
 438         for (;count > 0;count--, port++) {
 439                 if (!lock_card_at_interrupt(&isi_card[card]))
 440                         continue;
 441                 /* port not active or tx disabled to force flow control */
 442                 if (!(port->flags & ASYNC_INITIALIZED) ||
 443                                 !(port->status & ISI_TXOK))
 444                         unlock_card(&isi_card[card]);
 445                         continue;
 446
 447                 tty = port->tty;
 448
 449
 450                 if (tty == NULL) {
 451                         unlock_card(&isi_card[card]);
 452                         continue;
 453                 }
 454
 455                 txcount = min_t(short, TX_SIZE, port->xmit_cnt);
 456                 if (txcount <= 0 || tty->stopped || tty->hw_stopped) {
 457                         unlock_card(&isi_card[card]);
 458                         continue;
 459                 }
 460                 if (!(inw(base + 0x02) & (1 << port->channel))) {
 461                         unlock_card(&isi_card[card]);
 462                         continue;
 463                 }
 464                 pr_dbg("txing %d bytes, port%d.\n", txcount,
 465                         port->channel + 1);
 466                 outw((port->channel << isi_card[card].shift_count) | txcount,
 467                         base);
 468                 residue = NO;
 469                 wrd = 0;
 470                 while (1) {
 471                         cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE
 472                                         - port->xmit_tail));
 473                         if (residue == YES) {
 474                                 residue = NO;
 475                                 if (cnt > 0) {
 476                                         wrd |= (port->xmit_buf[port->xmit_tail]
 477                                                                         << 8);
 478                                         port->xmit_tail = (port->xmit_tail + 1)
 479                                                 & (SERIAL_XMIT_SIZE - 1);
 480                                         port->xmit_cnt--;
 481                                         txcount--;
 482                                         cnt--;
 483                                         outw(wrd, base);
 484                                 } else {
 485                                         outw(wrd, base);
 486                                         break;
 487                                 }
 488                         }
 489                         if (cnt <= 0) break;
 490                         word_count = cnt >> 1;
 491                         outsw(base, port->xmit_buf+port->xmit_tail,word_count);
 492                         port->xmit_tail = (port->xmit_tail
 493                                 + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
 494                         txcount -= (word_count << 1);
 495                         port->xmit_cnt -= (word_count << 1);
 496                         if (cnt & 0x0001) {
 497                                 residue = YES;
 498                                 wrd = port->xmit_buf[port->xmit_tail];
 499                                 port->xmit_tail = (port->xmit_tail + 1)
 500                                         & (SERIAL_XMIT_SIZE - 1);
 501                                 port->xmit_cnt--;
 502                                 txcount--;
 503                         }
 504                 }
 505
 506                 InterruptTheCard(base);
 507                 if (port->xmit_cnt <= 0)
 508                         port->status &= ~ISI_TXOK;
 509                 if (port->xmit_cnt <= WAKEUP_CHARS)
 510                         schedule_work(&port->bh_tqueue);
 511                 unlock_card(&isi_card[card]);
 512         }
 513
 514         /*      schedule another tx for hopefully in about 10ms */
 515 sched_again:
 516         if (!re_schedule) {
 517                 re_schedule = 2;
 518                 return;
 519         }
 520
 521         init_timer(&tx);
 522         tx.expires = jiffies + HZ/100;
 523         tx.data = 0;
 524         tx.function = isicom_tx;
 525         add_timer(&tx);
 526
 527         return;
 528 }
 529
 530 /*      Interrupt handlers      */
 531
 532
 533 static void isicom_bottomhalf(void *data)
 534 {
 535         struct isi_port *port = (struct isi_port *) data;
 536         struct tty_struct *tty = port->tty;
 537
 538         if (!tty)
 539                 return;
 540
 541         tty_wakeup(tty);
 542         wake_up_interruptible(&tty->write_wait);
 543 }
 544
 545 /*
 546  *      Main interrupt handler routine
 547  */
 548
 549 static irqreturn_t isicom_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 550 {
 551         struct isi_board *card = dev_id;
 552         struct isi_port *port;
 553         struct tty_struct *tty;
 554         unsigned long base;
 555         u16 header, word_count, count, channel;
 556         short byte_count;
 557         unsigned char *rp;
 558
 559         if (!card || !(card->status & FIRMWARE_LOADED))
 560                 return IRQ_NONE;
 561
 562         base = card->base;
 563         spin_lock(&card->card_lock);
 564
 565         if (card->isa == NO) {
 566                 /*
 567                  * disable any interrupts from the PCI card and lower the
 568                  * interrupt line
 569                  */
 570                 outw(0x8000, base+0x04);
 571                 ClearInterrupt(base);
 572         }
 573
 574         inw(base);              /* get the dummy word out */
 575         header = inw(base);
 576         channel = (header & 0x7800) >> card->shift_count;
 577         byte_count = header & 0xff;
 578
 579         if (channel + 1 > card->port_count) {
 580                 printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
 581                         "%d(channel) > port_count.\n", base, channel+1);
 582                 if (card->isa)
 583                         ClearInterrupt(base);
 584                 else
 585                         outw(0x0000, base+0x04); /* enable interrupts */
 586                 spin_unlock(&card->card_lock);
 587                 return IRQ_HANDLED;
 588         }
 589         port = card->ports + channel;
 590         if (!(port->flags & ASYNC_INITIALIZED)) {
 591                 if (card->isa)
 592                         ClearInterrupt(base);
 593                 else
 594                         outw(0x0000, base+0x04); /* enable interrupts */
 595                 return IRQ_HANDLED;
 596         }
 597
 598         tty = port->tty;
 599         if (tty == NULL) {
 600                 word_count = byte_count >> 1;
 601                 while(byte_count > 1) {
 602                         inw(base);
 603                         byte_count -= 2;
 604                 }
 605                 if (byte_count & 0x01)
 606                         inw(base);
 607                 if (card->isa == YES)
 608                         ClearInterrupt(base);
 609                 else
 610                         outw(0x0000, base+0x04); /* enable interrupts */
 611                 spin_unlock(&card->card_lock);
 612                 return IRQ_HANDLED;
 613         }
 614
 615         if (header & 0x8000) {          /* Status Packet */
 616                 header = inw(base);
 617                 switch(header & 0xff) {
 618                 case 0: /* Change in EIA signals */
 619                         if (port->flags & ASYNC_CHECK_CD) {
 620                                 if (port->status & ISI_DCD) {
 621                                         if (!(header & ISI_DCD)) {
 622                                         /* Carrier has been lost  */
 623                                                 pr_dbg("interrupt: DCD->low.\n"
 624                                                         );
 625                                                 port->status &= ~ISI_DCD;
 626                                                 schedule_work(&port->hangup_tq);
 627                                         }
 628                                 } else if (header & ISI_DCD) {
 629                                 /* Carrier has been detected */
 630                                         pr_dbg("interrupt: DCD->high.\n");
 631                                         port->status |= ISI_DCD;
 632                                         wake_up_interruptible(&port->open_wait);
 633                                 }
 634                         } else {
 635                                 if (header & ISI_DCD)
 636                                         port->status |= ISI_DCD;
 637                                 else
 638                                         port->status &= ~ISI_DCD;
 639                         }
 640
 641                         if (port->flags & ASYNC_CTS_FLOW) {
 642                                 if (port->tty->hw_stopped) {
 643                                         if (header & ISI_CTS) {
 644                                                 port->tty->hw_stopped = 0;
 645                                                 /* start tx ing */
 646                                                 port->status |= (ISI_TXOK
 647                                                         | ISI_CTS);
 648                                                 schedule_work(&port->bh_tqueue);
 649                                         }
 650                                 } else if (!(header & ISI_CTS)) {
 651                                         port->tty->hw_stopped = 1;
 652                                         /* stop tx ing */
 653                                         port->status &= ~(ISI_TXOK | ISI_CTS);
 654                                 }
 655                         } else {
 656                                 if (header & ISI_CTS)
 657                                         port->status |= ISI_CTS;
 658                                 else
 659                                         port->status &= ~ISI_CTS;
 660                         }
 661
 662                         if (header & ISI_DSR)
 663                                 port->status |= ISI_DSR;
 664                         else
 665                                 port->status &= ~ISI_DSR;
 666
 667                         if (header & ISI_RI)
 668                                 port->status |= ISI_RI;
 669                         else
 670                                 port->status &= ~ISI_RI;
 671
 672                         break;
 673
 674                 case 1: /* Received Break !!! */
 675                         tty_insert_flip_char(tty, 0, TTY_BREAK);
 676                         if (port->flags & ASYNC_SAK)
 677                                 do_SAK(tty);
 678                         tty_flip_buffer_push(tty);
 679                         break;
 680
 681                 case 2: /* Statistics            */
 682                         pr_dbg("isicom_interrupt: stats!!!.\n");
 683                         break;
 684
 685                 default:
 686                         pr_dbg("Intr: Unknown code in status packet.\n");
 687                         break;
 688                 }
 689         } else {                                /* Data   Packet */
 690
 691                 count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
 692                 pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count);
 693                 word_count = count >> 1;
 694                 insw(base, rp, word_count);
 695                 byte_count -= (word_count << 1);
 696                 if (count & 0x0001) {
 697                         tty_insert_flip_char(tty,  inw(base) & 0xff,
 698                                 TTY_NORMAL);
 699                         byte_count -= 2;
 700                 }
 701                 if (byte_count > 0) {
 702                         pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping "
 703                                 "bytes...\n", base, channel + 1);
 704                         while(byte_count > 0) { /* drain out unread xtra data */
 705                                 inw(base);
 706                                 byte_count -= 2;
 707                         }
 708                 }
 709                 tty_flip_buffer_push(tty);
 710         }
 711         if (card->isa == YES)
 712                 ClearInterrupt(base);
 713         else
 714                 outw(0x0000, base+0x04); /* enable interrupts */
 715
 716         return IRQ_HANDLED;
 717 }
 718
 719 static void isicom_config_port(struct isi_port *port)
 720 {
 721         struct isi_board *card = port->card;
 722         struct tty_struct *tty;
 723         unsigned long baud;
 724         unsigned long base = card->base;
 725         u16 channel_setup, channel = port->channel,
 726                 shift_count = card->shift_count;
 727         unsigned char flow_ctrl;
 728
 729         if (!(tty = port->tty) || !tty->termios)
 730                 return;
 731         baud = C_BAUD(tty);
 732         if (baud & CBAUDEX) {
 733                 baud &= ~CBAUDEX;
 734
 735                 /*  if CBAUDEX bit is on and the baud is set to either 50 or 75
 736                  *  then the card is programmed for 57.6Kbps or 115Kbps
 737                  *  respectively.
 738                  */
 739
 740                 if (baud < 1 || baud > 2)
 741                         port->tty->termios->c_cflag &= ~CBAUDEX;
 742                 else
 743                         baud += 15;
 744         }
 745         if (baud == 15) {
 746
 747                 /*  the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set
 748                  *  by the set_serial_info ioctl ... this is done by
 749                  *  the 'setserial' utility.
 750                  */
 751
 752                 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
 753                         baud++; /*  57.6 Kbps */
 754                 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
 755                         baud +=2; /*  115  Kbps */
 756         }
 757         if (linuxb_to_isib[baud] == -1) {
 758                 /* hang up */
 759                 drop_dtr(port);
 760                 return;
 761         }
 762         else
 763                 raise_dtr(port);
 764
 765         if (lock_card(card)) {
 766                 outw(0x8000 | (channel << shift_count) |0x03, base);
 767                 outw(linuxb_to_isib[baud] << 8 | 0x03, base);
 768                 channel_setup = 0;
 769                 switch(C_CSIZE(tty)) {
 770                 case CS5:
 771                         channel_setup |= ISICOM_CS5;
 772                         break;
 773                 case CS6:
 774                         channel_setup |= ISICOM_CS6;
 775                         break;
 776                 case CS7:
 777                         channel_setup |= ISICOM_CS7;
 778                         break;
 779                 case CS8:
 780                         channel_setup |= ISICOM_CS8;
 781                         break;
 782                 }
 783
 784                 if (C_CSTOPB(tty))
 785                         channel_setup |= ISICOM_2SB;
 786                 if (C_PARENB(tty)) {
 787                         channel_setup |= ISICOM_EVPAR;
 788                         if (C_PARODD(tty))
 789                                 channel_setup |= ISICOM_ODPAR;
 790                 }
 791                 outw(channel_setup, base);
 792                 InterruptTheCard(base);
 793                 unlock_card(card);
 794         }
 795         if (C_CLOCAL(tty))
 796                 port->flags &= ~ASYNC_CHECK_CD;
 797         else
 798                 port->flags |= ASYNC_CHECK_CD;
 799
 800         /* flow control settings ...*/
 801         flow_ctrl = 0;
 802         port->flags &= ~ASYNC_CTS_FLOW;
 803         if (C_CRTSCTS(tty)) {
 804                 port->flags |= ASYNC_CTS_FLOW;
 805                 flow_ctrl |= ISICOM_CTSRTS;
 806         }
 807         if (I_IXON(tty))
 808                 flow_ctrl |= ISICOM_RESPOND_XONXOFF;
 809         if (I_IXOFF(tty))
 810                 flow_ctrl |= ISICOM_INITIATE_XONXOFF;
 811
 812         if (lock_card(card)) {
 813                 outw(0x8000 | (channel << shift_count) |0x04, base);
 814                 outw(flow_ctrl << 8 | 0x05, base);
 815                 outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
 816                 InterruptTheCard(base);
 817                 unlock_card(card);
 818         }
 819
 820         /*      rx enabled -> enable port for rx on the card    */
 821         if (C_CREAD(tty)) {
 822                 card->port_status |= (1 << channel);
 823                 outw(card->port_status, base + 0x02);
 824         }
 825 }
 826
 827 /* open et all */
 828
 829 static inline void isicom_setup_board(struct isi_board *bp)
 830 {
 831         int channel;
 832         struct isi_port *port;
 833         unsigned long flags;
 834
 835         spin_lock_irqsave(&bp->card_lock, flags);
 836         if (bp->status & BOARD_ACTIVE) {
 837                 spin_unlock_irqrestore(&bp->card_lock, flags);
 838                 return;
 839         }
 840         port = bp->ports;
 841         bp->status |= BOARD_ACTIVE;
 842         spin_unlock_irqrestore(&bp->card_lock, flags);
 843         for (channel = 0; channel < bp->port_count; channel++, port++)
 844                 drop_dtr_rts(port);
 845         return;
 846 }
 847
 848 static int isicom_setup_port(struct isi_port *port)
 849 {
 850         struct isi_board *card = port->card;
 851         unsigned long flags;
 852
 853         if (port->flags & ASYNC_INITIALIZED) {
 854                 return 0;
 855         }
 856         if (!port->xmit_buf) {
 857                 unsigned long page;
 858
 859                 if (!(page = get_zeroed_page(GFP_KERNEL)))
 860                         return -ENOMEM;
 861
 862                 if (port->xmit_buf) {
 863                         free_page(page);
 864                         return -ERESTARTSYS;
 865                 }
 866                 port->xmit_buf = (unsigned char *) page;
 867         }
 868
 869         spin_lock_irqsave(&card->card_lock, flags);
 870         if (port->tty)
 871                 clear_bit(TTY_IO_ERROR, &port->tty->flags);
 872         if (port->count == 1)
 873                 card->count++;
 874
 875         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
 876
 877         /*      discard any residual data       */
 878         kill_queue(port, ISICOM_KILLTX | ISICOM_KILLRX);
 879
 880         isicom_config_port(port);
 881         port->flags |= ASYNC_INITIALIZED;
 882         spin_unlock_irqrestore(&card->card_lock, flags);
 883
 884         return 0;
 885 }
 886
 887 static int block_til_ready(struct tty_struct *tty, struct file *filp,
 888         struct isi_port *port)
 889 {
 890         struct isi_board *card = port->card;
 891         int do_clocal = 0, retval;
 892         unsigned long flags;
 893         DECLARE_WAITQUEUE(wait, current);
 894
 895         /* block if port is in the process of being closed */
 896
 897         if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
 898                 pr_dbg("block_til_ready: close in progress.\n");
 899                 interruptible_sleep_on(&port->close_wait);
 900                 if (port->flags & ASYNC_HUP_NOTIFY)
 901                         return -EAGAIN;
 902                 else
 903                         return -ERESTARTSYS;
 904         }
 905
 906         /* if non-blocking mode is set ... */
 907
 908         if ((filp->f_flags & O_NONBLOCK) ||
 909                         (tty->flags & (1 << TTY_IO_ERROR))) {
 910                 pr_dbg("block_til_ready: non-block mode.\n");
 911                 port->flags |= ASYNC_NORMAL_ACTIVE;
 912                 return 0;
 913         }
 914
 915         if (C_CLOCAL(tty))
 916                 do_clocal = 1;
 917
 918         /* block waiting for DCD to be asserted, and while
 919                                                 callout dev is busy */
 920         retval = 0;
 921         add_wait_queue(&port->open_wait, &wait);
 922
 923         spin_lock_irqsave(&card->card_lock, flags);
 924         if (!tty_hung_up_p(filp))
 925                 port->count--;
 926         port->blocked_open++;
 927         spin_unlock_irqrestore(&card->card_lock, flags);
 928
 929         while (1) {
 930                 raise_dtr_rts(port);
 931
 932                 set_current_state(TASK_INTERRUPTIBLE);
 933                 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
 934                         if (port->flags & ASYNC_HUP_NOTIFY)
 935                                 retval = -EAGAIN;
 936                         else
 937                                 retval = -ERESTARTSYS;
 938                         break;
 939                 }
 940                 if (!(port->flags & ASYNC_CLOSING) &&
 941                                 (do_clocal || (port->status & ISI_DCD))) {
 942                         break;
 943                 }
 944                 if (signal_pending(current)) {
 945                         retval = -ERESTARTSYS;
 946                         break;
 947                 }
 948                 schedule();
 949         }
 950         set_current_state(TASK_RUNNING);
 951         remove_wait_queue(&port->open_wait, &wait);
 952         spin_lock_irqsave(&card->card_lock, flags);
 953         if (!tty_hung_up_p(filp))
 954                 port->count++;
 955         port->blocked_open--;
 956         spin_unlock_irqrestore(&card->card_lock, flags);
 957         if (retval)
 958                 return retval;
 959         port->flags |= ASYNC_NORMAL_ACTIVE;
 960         return 0;
 961 }
 962
 963 static int isicom_open(struct tty_struct *tty, struct file *filp)
 964 {
 965         struct isi_port *port;
 966         struct isi_board *card;
 967         unsigned int line, board;
 968         int error;
 969
 970         line = tty->index;
 971         if (line < 0 || line > PORT_COUNT-1)
 972                 return -ENODEV;
 973         board = BOARD(line);
 974         card = &isi_card[board];
 975
 976         if (!(card->status & FIRMWARE_LOADED))
 977                 return -ENODEV;
 978
 979         /*  open on a port greater than the port count for the card !!! */
 980         if (line > ((board * 16) + card->port_count - 1))
 981                 return -ENODEV;
 982
 983         port = &isi_ports[line];
 984         if (isicom_paranoia_check(port, tty->name, "isicom_open"))
 985                 return -ENODEV;
 986
 987         isicom_setup_board(card);
 988
 989         port->count++;
 990         tty->driver_data = port;
 991         port->tty = tty;
 992         if ((error = isicom_setup_port(port))!=0)
 993                 return error;
 994         if ((error = block_til_ready(tty, filp, port))!=0)
 995                 return error;
 996
 997         return 0;
 998 }
 999
1000 /* close et all */
1001
1002 static inline void isicom_shutdown_board(struct isi_board *bp)
1003 {
1004         unsigned long flags;
1005
1006         spin_lock_irqsave(&bp->card_lock, flags);
1007         if (bp->status & BOARD_ACTIVE) {
1008                 bp->status &= ~BOARD_ACTIVE;
1009         }
1010         spin_unlock_irqrestore(&bp->card_lock, flags);
1011 }
1012
1013 static void isicom_shutdown_port(struct isi_port *port)
1014 {
1015         struct isi_board *card = port->card;
1016         struct tty_struct *tty;
1017         unsigned long flags;
1018
1019         tty = port->tty;
1020
1021         spin_lock_irqsave(&card->card_lock, flags);
1022         if (!(port->flags & ASYNC_INITIALIZED)) {
1023                 spin_unlock_irqrestore(&card->card_lock, flags);
1024                 return;
1025         }
1026         if (port->xmit_buf) {
1027                 free_page((unsigned long) port->xmit_buf);
1028                 port->xmit_buf = NULL;
1029         }
1030         port->flags &= ~ASYNC_INITIALIZED;
1031         /* 3rd October 2000 : Vinayak P Risbud */
1032         port->tty = NULL;
1033         spin_unlock_irqrestore(&card->card_lock, flags);
1034
1035         /*Fix done by Anil .S on 30-04-2001
1036         remote login through isi port has dtr toggle problem
1037         due to which the carrier drops before the password prompt
1038         appears on the remote end. Now we drop the dtr only if the
1039         HUPCL(Hangup on close) flag is set for the tty*/
1040
1041         if (C_HUPCL(tty))
1042                 /* drop dtr on this port */
1043                 drop_dtr(port);
1044
1045         /* any other port uninits  */
1046         if (tty)
1047                 set_bit(TTY_IO_ERROR, &tty->flags);
1048
1049         if (--card->count < 0) {
1050                 pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n",
1051                         card->base, card->count);
1052                 card->count = 0;
1053         }
1054
1055         /* last port was closed, shutdown that boad too */
1056         if (C_HUPCL(tty)) {
1057                 if (!card->count)
1058                         isicom_shutdown_board(card);
1059         }
1060 }
1061
1062 static void isicom_close(struct tty_struct *tty, struct file *filp)
1063 {
1064         struct isi_port *port = tty->driver_data;
1065         struct isi_board *card = port->card;
1066         unsigned long flags;
1067
1068         if (!port)
1069                 return;
1070         if (isicom_paranoia_check(port, tty->name, "isicom_close"))
1071                 return;
1072
1073         pr_dbg("Close start!!!.\n");
1074
1075         spin_lock_irqsave(&card->card_lock, flags);
1076         if (tty_hung_up_p(filp)) {
1077                 spin_unlock_irqrestore(&card->card_lock, flags);
1078                 return;
1079         }
1080
1081         if (tty->count == 1 && port->count != 1) {
1082                 printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
1083                         "count tty->count = 1 port count = %d.\n",
1084                         card->base, port->count);
1085                 port->count = 1;
1086         }
1087         if (--port->count < 0) {
1088                 printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
1089                         "count for channel%d = %d", card->base, port->channel,
1090                         port->count);
1091                 port->count = 0;
1092         }
1093
1094         if (port->count) {
1095                 spin_unlock_irqrestore(&card->card_lock, flags);
1096                 return;
1097         }
1098         port->flags |= ASYNC_CLOSING;
1099         tty->closing = 1;
1100         spin_unlock_irqrestore(&card->card_lock, flags);
1101
1102         if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1103                 tty_wait_until_sent(tty, port->closing_wait);
1104         /* indicate to the card that no more data can be received
1105            on this port */
1106         spin_lock_irqsave(&card->card_lock, flags);
1107         if (port->flags & ASYNC_INITIALIZED) {
1108                 card->port_status &= ~(1 << port->channel);
1109                 outw(card->port_status, card->base + 0x02);
1110         }
1111         isicom_shutdown_port(port);
1112         spin_unlock_irqrestore(&card->card_lock, flags);
1113
1114         if (tty->driver->flush_buffer)
1115                 tty->driver->flush_buffer(tty);
1116         tty_ldisc_flush(tty);
1117
1118         spin_lock_irqsave(&card->card_lock, flags);
1119         tty->closing = 0;
1120
1121         if (port->blocked_open) {
1122                 spin_unlock_irqrestore(&card->card_lock, flags);
1123                 if (port->close_delay) {
1124                         pr_dbg("scheduling until time out.\n");
1125                         msleep_interruptible(
1126                                 jiffies_to_msecs(port->close_delay));
1127                 }
1128                 spin_lock_irqsave(&card->card_lock, flags);
1129                 wake_up_interruptible(&port->open_wait);
1130         }
1131         port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
1132         wake_up_interruptible(&port->close_wait);
1133         spin_unlock_irqrestore(&card->card_lock, flags);
1134 }
1135
1136 /* write et all */
1137 static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
1138         int count)
1139 {
1140         struct isi_port *port = tty->driver_data;
1141         struct isi_board *card = port->card;
1142         unsigned long flags;
1143         int cnt, total = 0;
1144
1145         if (isicom_paranoia_check(port, tty->name, "isicom_write"))
1146                 return 0;
1147
1148         if (!tty || !port->xmit_buf)
1149                 return 0;
1150
1151         spin_lock_irqsave(&card->card_lock, flags);
1152
1153         while(1) {
1154                 cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt
1155                                 - 1, SERIAL_XMIT_SIZE - port->xmit_head));
1156                 if (cnt <= 0)
1157                         break;
1158
1159                 memcpy(port->xmit_buf + port->xmit_head, buf, cnt);
1160                 port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
1161                         - 1);
1162                 port->xmit_cnt += cnt;
1163                 buf += cnt;
1164                 count -= cnt;
1165                 total += cnt;
1166         }
1167         if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped)
1168                 port->status |= ISI_TXOK;
1169         spin_unlock_irqrestore(&card->card_lock, flags);
1170         return total;
1171 }
1172
1173 /* put_char et all */
1174 static void isicom_put_char(struct tty_struct *tty, unsigned char ch)
1175 {
1176         struct isi_port *port = tty->driver_data;
1177         struct isi_board *card = port->card;
1178         unsigned long flags;
1179
1180         if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
1181                 return;
1182
1183         if (!tty || !port->xmit_buf)
1184                 return;
1185
1186         spin_lock_irqsave(&card->card_lock, flags);
1187         if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
1188                 spin_unlock_irqrestore(&card->card_lock, flags);
1189                 return;
1190         }
1191
1192         port->xmit_buf[port->xmit_head++] = ch;
1193         port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
1194         port->xmit_cnt++;
1195         spin_unlock_irqrestore(&card->card_lock, flags);
1196 }
1197
1198 /* flush_chars et all */
1199 static void isicom_flush_chars(struct tty_struct *tty)
1200 {
1201         struct isi_port *port = tty->driver_data;
1202
1203         if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars"))
1204                 return;
1205
1206         if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1207                         !port->xmit_buf)
1208                 return;
1209
1210         /* this tells the transmitter to consider this port for
1211            data output to the card ... that's the best we can do. */
1212         port->status |= ISI_TXOK;
1213 }
1214
1215 /* write_room et all */
1216 static int isicom_write_room(struct tty_struct *tty)
1217 {
1218         struct isi_port *port = tty->driver_data;
1219         int free;
1220
1221         if (isicom_paranoia_check(port, tty->name, "isicom_write_room"))
1222                 return 0;
1223
1224         free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1225         if (free < 0)
1226                 free = 0;
1227         return free;
1228 }
1229
1230 /* chars_in_buffer et all */
1231 static int isicom_chars_in_buffer(struct tty_struct *tty)
1232 {
1233         struct isi_port *port = tty->driver_data;
1234         if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer"))
1235                 return 0;
1236         return port->xmit_cnt;
1237 }
1238
1239 /* ioctl et all */
1240 static inline void isicom_send_break(struct isi_port *port,
1241         unsigned long length)
1242 {
1243         struct isi_board *card = port->card;
1244         unsigned long base = card->base;
1245
1246         if (!lock_card(card))
1247                 return;
1248
1249         outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
1250         outw((length & 0xff) << 8 | 0x00, base);
1251         outw((length & 0xff00), base);
1252         InterruptTheCard(base);
1253
1254         unlock_card(card);
1255 }
1256
1257 static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
1258 {
1259         struct isi_port *port = tty->driver_data;
1260         /* just send the port status */
1261         u16 status = port->status;
1262
1263         if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1264                 return -ENODEV;
1265
1266         return  ((status & ISI_RTS) ? TIOCM_RTS : 0) |
1267                 ((status & ISI_DTR) ? TIOCM_DTR : 0) |
1268                 ((status & ISI_DCD) ? TIOCM_CAR : 0) |
1269                 ((status & ISI_DSR) ? TIOCM_DSR : 0) |
1270                 ((status & ISI_CTS) ? TIOCM_CTS : 0) |
1271                 ((status & ISI_RI ) ? TIOCM_RI  : 0);
1272 }
1273
1274 static int isicom_tiocmset(struct tty_struct *tty, struct file *file,
1275         unsigned int set, unsigned int clear)
1276 {
1277         struct isi_port *port = tty->driver_data;
1278
1279         if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1280                 return -ENODEV;
1281
1282         if (set & TIOCM_RTS)
1283                 raise_rts(port);
1284         if (set & TIOCM_DTR)
1285                 raise_dtr(port);
1286
1287         if (clear & TIOCM_RTS)
1288                 drop_rts(port);
1289         if (clear & TIOCM_DTR)
1290                 drop_dtr(port);
1291
1292         return 0;
1293 }
1294
1295 static int isicom_set_serial_info(struct isi_port *port,
1296         struct serial_struct __user *info)
1297 {
1298         struct serial_struct newinfo;
1299         int reconfig_port;
1300
1301         if (copy_from_user(&newinfo, info, sizeof(newinfo)))
1302                 return -EFAULT;
1303
1304         reconfig_port = ((port->flags & ASYNC_SPD_MASK) !=
1305                 (newinfo.flags & ASYNC_SPD_MASK));
1306
1307         if (!capable(CAP_SYS_ADMIN)) {
1308                 if ((newinfo.close_delay != port->close_delay) ||
1309                                 (newinfo.closing_wait != port->closing_wait) ||
1310                                 ((newinfo.flags & ~ASYNC_USR_MASK) !=
1311                                 (port->flags & ~ASYNC_USR_MASK)))
1312                         return -EPERM;
1313                 port->flags = ((port->flags & ~ ASYNC_USR_MASK) |
1314                                 (newinfo.flags & ASYNC_USR_MASK));
1315         }
1316         else {
1317                 port->close_delay = newinfo.close_delay;
1318                 port->closing_wait = newinfo.closing_wait;
1319                 port->flags = ((port->flags & ~ASYNC_FLAGS) |
1320                                 (newinfo.flags & ASYNC_FLAGS));
1321         }
1322         if (reconfig_port) {
1323                 isicom_config_port(port);
1324         }
1325         return 0;
1326 }
1327
1328 static int isicom_get_serial_info(struct isi_port *port,
1329         struct serial_struct __user *info)
1330 {
1331         struct serial_struct out_info;
1332
1333         memset(&out_info, 0, sizeof(out_info));
1334 /*      out_info.type = ? */
1335         out_info.line = port - isi_ports;
1336         out_info.port = port->card->base;
1337         out_info.irq = port->card->irq;
1338         out_info.flags = port->flags;
1339 /*      out_info.baud_base = ? */
1340         out_info.close_delay = port->close_delay;
1341         out_info.closing_wait = port->closing_wait;
1342         if (copy_to_user(info, &out_info, sizeof(out_info)))
1343                 return -EFAULT;
1344         return 0;
1345 }
1346
1347 static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
1348         unsigned int cmd, unsigned long arg)
1349 {
1350         struct isi_port *port = tty->driver_data;
1351         void __user *argp = (void __user *)arg;
1352         int retval;
1353
1354         if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1355                 return -ENODEV;
1356
1357         switch(cmd) {
1358         case TCSBRK:
1359                 retval = tty_check_change(tty);
1360                 if (retval)
1361                         return retval;
1362                 tty_wait_until_sent(tty, 0);
1363                 if (!arg)
1364                         isicom_send_break(port, HZ/4);
1365                 return 0;
1366
1367         case TCSBRKP:
1368                 retval = tty_check_change(tty);
1369                 if (retval)
1370                         return retval;
1371                 tty_wait_until_sent(tty, 0);
1372                 isicom_send_break(port, arg ? arg * (HZ/10) : HZ/4);
1373                 return 0;
1374
1375         case TIOCGSOFTCAR:
1376                 return put_user(C_CLOCAL(tty) ? 1 : 0,
1377                                 (unsigned long __user *)argp);
1378
1379         case TIOCSSOFTCAR:
1380                 if (get_user(arg, (unsigned long __user *) argp))
1381                         return -EFAULT;
1382                 tty->termios->c_cflag =
1383                         ((tty->termios->c_cflag & ~CLOCAL) |
1384                         (arg ? CLOCAL : 0));
1385                 return 0;
1386
1387         case TIOCGSERIAL:
1388                 return isicom_get_serial_info(port, argp);
1389
1390         case TIOCSSERIAL:
1391                 return isicom_set_serial_info(port, argp);
1392
1393         default:
1394                 return -ENOIOCTLCMD;
1395         }
1396         return 0;
1397 }
1398
1399 /* set_termios et all */
1400 static void isicom_set_termios(struct tty_struct *tty,
1401         struct termios *old_termios)
1402 {
1403         struct isi_port *port = tty->driver_data;
1404
1405         if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
1406                 return;
1407
1408         if (tty->termios->c_cflag == old_termios->c_cflag &&
1409                         tty->termios->c_iflag == old_termios->c_iflag)
1410                 return;
1411
1412         isicom_config_port(port);
1413
1414         if ((old_termios->c_cflag & CRTSCTS) &&
1415                         !(tty->termios->c_cflag & CRTSCTS)) {
1416                 tty->hw_stopped = 0;
1417                 isicom_start(tty);
1418         }
1419 }
1420
1421 /* throttle et all */
1422 static void isicom_throttle(struct tty_struct *tty)
1423 {
1424         struct isi_port *port = tty->driver_data;
1425         struct isi_board *card = port->card;
1426
1427         if (isicom_paranoia_check(port, tty->name, "isicom_throttle"))
1428                 return;
1429
1430         /* tell the card that this port cannot handle any more data for now */
1431         card->port_status &= ~(1 << port->channel);
1432         outw(card->port_status, card->base + 0x02);
1433 }
1434
1435 /* unthrottle et all */
1436 static void isicom_unthrottle(struct tty_struct *tty)
1437 {
1438         struct isi_port *port = tty->driver_data;
1439         struct isi_board *card = port->card;
1440
1441         if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle"))
1442                 return;
1443
1444         /* tell the card that this port is ready to accept more data */
1445         card->port_status |= (1 << port->channel);
1446         outw(card->port_status, card->base + 0x02);
1447 }
1448
1449 /* stop et all */
1450 static void isicom_stop(struct tty_struct *tty)
1451 {
1452         struct isi_port *port = tty->driver_data;
1453
1454         if (isicom_paranoia_check(port, tty->name, "isicom_stop"))
1455                 return;
1456
1457         /* this tells the transmitter not to consider this port for
1458            data output to the card. */
1459         port->status &= ~ISI_TXOK;
1460 }
1461
1462 /* start et all */
1463 static void isicom_start(struct tty_struct *tty)
1464 {
1465         struct isi_port *port = tty->driver_data;
1466
1467         if (isicom_paranoia_check(port, tty->name, "isicom_start"))
1468                 return;
1469
1470         /* this tells the transmitter to consider this port for
1471            data output to the card. */
1472         port->status |= ISI_TXOK;
1473 }
1474
1475 /* hangup et all */
1476 static void do_isicom_hangup(void *data)
1477 {
1478         struct isi_port *port = data;
1479         struct tty_struct *tty;
1480
1481         tty = port->tty;
1482         if (tty)
1483                 tty_hangup(tty);
1484 }
1485
1486 static void isicom_hangup(struct tty_struct *tty)
1487 {
1488         struct isi_port *port = tty->driver_data;
1489
1490         if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
1491                 return;
1492
1493         isicom_shutdown_port(port);
1494         port->count = 0;
1495         port->flags &= ~ASYNC_NORMAL_ACTIVE;
1496         port->tty = NULL;
1497         wake_up_interruptible(&port->open_wait);
1498 }
1499
1500 /* flush_buffer et all */
1501 static void isicom_flush_buffer(struct tty_struct *tty)
1502 {
1503         struct isi_port *port = tty->driver_data;
1504         struct isi_board *card = port->card;
1505         unsigned long flags;
1506
1507         if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
1508                 return;
1509
1510         spin_lock_irqsave(&card->card_lock, flags);
1511         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
1512         spin_unlock_irqrestore(&card->card_lock, flags);
1513
1514         wake_up_interruptible(&tty->write_wait);
1515         tty_wakeup(tty);
1516 }
1517
1518 /*
1519  * Driver init and deinit functions
1520  */
1521
1522 static int __devinit isicom_register_ioregion(struct pci_dev *pdev,
1523         const unsigned int index)
1524 {
1525         struct isi_board *board = pci_get_drvdata(pdev);
1526
1527         if (!board->base)
1528                 return -EINVAL;
1529
1530         if (!request_region(board->base, 16, ISICOM_NAME)) {
1531                 dev_dbg(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
1532                         "will be disabled.\n", board->base, board->base + 15,
1533                         index + 1);
1534                 return -EBUSY;
1535         }
1536
1537         return 0;
1538 }
1539
1540 static void isicom_unregister_ioregion(struct pci_dev *pdev)
1541 {
1542         struct isi_board *board = pci_get_drvdata(pdev);
1543
1544         if (!board->base)
1545                 return;
1546
1547         release_region(board->base, 16);
1548         dev_dbg(&pdev->dev, "I/O Region 0x%lx-0x%lx released.\n",
1549                 board->base, board->base + 15);
1550         board->base = 0;
1551 }
1552
1553 static struct tty_operations isicom_ops = {
1554         .open                   = isicom_open,
1555         .close                  = isicom_close,
1556         .write                  = isicom_write,
1557         .put_char               = isicom_put_char,
1558         .flush_chars            = isicom_flush_chars,
1559         .write_room             = isicom_write_room,
1560         .chars_in_buffer        = isicom_chars_in_buffer,
1561         .ioctl                  = isicom_ioctl,
1562         .set_termios            = isicom_set_termios,
1563         .throttle               = isicom_throttle,
1564         .unthrottle             = isicom_unthrottle,
1565         .stop                   = isicom_stop,
1566         .start                  = isicom_start,
1567         .hangup                 = isicom_hangup,
1568         .flush_buffer           = isicom_flush_buffer,
1569         .tiocmget               = isicom_tiocmget,
1570         .tiocmset               = isicom_tiocmset,
1571 };
1572
1573 static int __devinit isicom_register_tty_driver(void)
1574 {
1575         int error = -ENOMEM;
1576
1577         /* tty driver structure initialization */
1578         isicom_normal = alloc_tty_driver(PORT_COUNT);
1579         if (!isicom_normal)
1580                 goto end;
1581
1582         isicom_normal->owner                    = THIS_MODULE;
1583         isicom_normal->name                     = "ttyM";
1584         isicom_normal->devfs_name               = "isicom/";
1585         isicom_normal->major                    = ISICOM_NMAJOR;
1586         isicom_normal->minor_start              = 0;
1587         isicom_normal->type                     = TTY_DRIVER_TYPE_SERIAL;
1588         isicom_normal->subtype                  = SERIAL_TYPE_NORMAL;
1589         isicom_normal->init_termios             = tty_std_termios;
1590         isicom_normal->init_termios.c_cflag     = B9600 | CS8 | CREAD | HUPCL |
1591                 CLOCAL;
1592         isicom_normal->flags                    = TTY_DRIVER_REAL_RAW;
1593         tty_set_operations(isicom_normal, &isicom_ops);
1594
1595         if ((error = tty_register_driver(isicom_normal))) {
1596                 pr_dbg("Couldn't register the dialin driver, error=%d\n",
1597                         error);
1598                 put_tty_driver(isicom_normal);
1599         }
1600 end:
1601         return error;
1602 }
1603
1604 static void isicom_unregister_tty_driver(void)
1605 {
1606         int error;
1607
1608         if ((error = tty_unregister_driver(isicom_normal)))
1609                 pr_dbg("couldn't unregister normal driver, error=%d.\n", error);
1610
1611         put_tty_driver(isicom_normal);
1612 }
1613
1614 static int __devinit isicom_register_isr(struct pci_dev *pdev,
1615         const unsigned int index)
1616 {
1617         struct isi_board *board = pci_get_drvdata(pdev);
1618         unsigned long irqflags = SA_INTERRUPT;
1619         int retval = -EINVAL;
1620
1621         if (!board->base)
1622                 goto end;
1623
1624         if (board->isa == NO)
1625                 irqflags |= SA_SHIRQ;
1626
1627         retval = request_irq(board->irq, isicom_interrupt, irqflags,
1628                 ISICOM_NAME, board);
1629         if (retval < 0)
1630                 dev_warn(&pdev->dev, "Could not install handler at Irq %d. "
1631                         "Card%d will be disabled.\n", board->irq, index + 1);
1632         else
1633                 retval = 0;
1634 end:
1635         return retval;
1636 }
1637
1638 static int __devinit reset_card(struct pci_dev *pdev,
1639         const unsigned int card, unsigned int *signature)
1640 {
1641         struct isi_board *board = pci_get_drvdata(pdev);
1642         unsigned long base = board->base;
1643         unsigned int portcount = 0;
1644         int retval = 0;
1645
1646         dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1,
1647                 base);
1648
1649         inw(base + 0x8);
1650
1651         mdelay(10);
1652
1653         outw(0, base + 0x8); /* Reset */
1654
1655         msleep(3000);
1656
1657         *signature = inw(base + 0x4) & 0xff;
1658
1659         if (board->isa == YES) {
1660                 if (!(inw(base + 0xe) & 0x1) || (inw(base + 0x2))) {
1661                         dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
1662                                 inw(base + 0x2), inw(base + 0xe));
1663                         dev_err(&pdev->dev, "ISILoad:ISA Card%d reset failure "
1664                                 "(Possible bad I/O Port Address 0x%lx).\n",
1665                                 card + 1, base);
1666                         retval = -EIO;
1667                         goto end;
1668                 }
1669         } else {
1670                 portcount = inw(base + 0x2);
1671                 if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) &&
1672                                 (portcount != 4) && (portcount != 8))) {
1673                         dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
1674                                 inw(base + 0x2), inw(base + 0xe));
1675                         dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure "
1676                                 "(Possible bad I/O Port Address 0x%lx).\n",
1677                                 card + 1, base);
1678                         retval = -EIO;
1679                         goto end;
1680                 }
1681         }
1682
1683         switch (*signature) {
1684         case 0xa5:
1685         case 0xbb:
1686         case 0xdd:
1687                 board->port_count = (board->isa == NO && portcount == 4) ? 4 :
1688                         8;
1689                 board->shift_count = 12;
1690                 break;
1691         case 0xcc:
1692                 board->port_count = 16;
1693                 board->shift_count = 11;
1694                 break;
1695         default:
1696                 dev_warn(&pdev->dev, "ISILoad:Card%d reset failure (Possible "
1697                         "bad I/O Port Address 0x%lx).\n", card + 1, base);
1698                 dev_dbg(&pdev->dev, "Sig=0x%lx\n", signature);
1699                 retval = -EIO;
1700         }
1701         dev_info(&pdev->dev, "-Done\n");
1702
1703 end:
1704         return retval;
1705 }
1706
1707 static inline int WaitTillCardIsFree(u16 base)
1708 {
1709         unsigned long count = 0;
1710
1711         while (!(inw(base + 0xe) & 0x1) && count++ < 100)
1712                 msleep(5);
1713
1714         return !(inw(base + 0xe) & 0x1);
1715 }
1716
1717 static int __devinit load_firmware(struct pci_dev *pdev,
1718         const unsigned int index, const unsigned int signature)
1719 {
1720         struct isi_board *board = pci_get_drvdata(pdev);
1721         const struct firmware *fw;
1722         unsigned long base = board->base;
1723         unsigned int a;
1724         u16 word_count, status;
1725         int retval = -EIO;
1726         char *name;
1727         u8 *data;
1728
1729         struct stframe {
1730                 u16     addr;
1731                 u16     count;
1732                 u8      data[0];
1733         } *frame;
1734
1735         switch (signature) {
1736         case 0xa5:
1737                 name = "isi608.bin";
1738                 break;
1739         case 0xbb:
1740                 name = "isi608em.bin";
1741                 break;
1742         case 0xcc:
1743                 name = "isi616em.bin";
1744                 break;
1745         case 0xdd:
1746                 name = "isi4608.bin";
1747                 break;
1748         case 0xee:
1749                 name = "isi4616.bin";
1750                 break;
1751         default:
1752                 dev_err(&pdev->dev, "Unknown signature.\n");
1753                 goto end;
1754         }
1755
1756         retval = request_firmware(&fw, name, &pdev->dev);
1757         if (retval)
1758                 goto end;
1759
1760         for (frame = (struct stframe *)fw->data;
1761                         frame < (struct stframe *)(fw->data + fw->size);
1762                         frame++) {
1763                 if (WaitTillCardIsFree(base))
1764                         goto errrelfw;
1765
1766                 outw(0xf0, base);       /* start upload sequence */
1767                 outw(0x00, base);
1768                 outw(frame->addr, base); /* lsb of address */
1769
1770                 word_count = frame->count / 2 + frame->count % 2;
1771                 outw(word_count, base);
1772                 InterruptTheCard(base);
1773
1774                 udelay(100); /* 0x2f */
1775
1776                 if (WaitTillCardIsFree(base))
1777                         goto errrelfw;
1778
1779                 if ((status = inw(base + 0x4)) != 0) {
1780                         dev_warn(&pdev->dev, "Card%d rejected load header:\n"
1781                                 "Address:0x%x\nCount:0x%x\nStatus:0x%x\n",
1782                                 index + 1, frame->addr, frame->count, status);
1783                         goto errrelfw;
1784                 }
1785                 outsw(base, frame->data, word_count);
1786
1787                 InterruptTheCard(base);
1788
1789                 udelay(50); /* 0x0f */
1790
1791                 if (WaitTillCardIsFree(base))
1792                         goto errrelfw;
1793
1794                 if ((status = inw(base + 0x4)) != 0) {
1795                         dev_err(&pdev->dev, "Card%d got out of sync.Card "
1796                                 "Status:0x%x\n", index + 1, status);
1797                         goto errrelfw;
1798                 }
1799         }
1800
1801         retval = -EIO;
1802
1803         if (WaitTillCardIsFree(base))
1804                 goto errrelfw;
1805
1806         outw(0xf2, base);
1807         outw(0x800, base);
1808         outw(0x0, base);
1809         outw(0x0, base);
1810         InterruptTheCard(base);
1811         outw(0x0, base + 0x4); /* for ISI4608 cards */
1812
1813 /* XXX: should we test it by reading it back and comparing with original like
1814  * in load firmware package? */
1815         for (frame = (struct stframe*)fw->data;
1816                         frame < (struct stframe*)(fw->data + fw->size);
1817                         frame++) {
1818                 if (WaitTillCardIsFree(base))
1819                         goto errrelfw;
1820
1821                 outw(0xf1, base); /* start download sequence */
1822                 outw(0x00, base);
1823                 outw(frame->addr, base); /* lsb of address */
1824
1825                 word_count = (frame->count >> 1) + frame->count % 2;
1826                 outw(word_count + 1, base);
1827                 InterruptTheCard(base);
1828
1829                 udelay(50); /* 0xf */
1830
1831                 if (WaitTillCardIsFree(base))
1832                         goto errrelfw;
1833
1834                 if ((status = inw(base + 0x4)) != 0) {
1835                         dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
1836                                 "Address:0x%x\nCount:0x%x\nStatus: 0x%x\n",
1837                                 index + 1, frame->addr, frame->count, status);
1838                         goto errrelfw;
1839                 }
1840
1841                 data = kmalloc(word_count * 2, GFP_KERNEL);
1842                 inw(base);
1843                 insw(base, data, word_count);
1844                 InterruptTheCard(base);
1845
1846                 for (a = 0; a < frame->count; a++)
1847                         if (data[a] != frame->data[a]) {
1848                                 kfree(data);
1849                                 dev_err(&pdev->dev, "Card%d, firmware upload "
1850                                         "failed\n", index + 1);
1851                                 goto errrelfw;
1852                         }
1853                 kfree(data);
1854
1855                 udelay(50); /* 0xf */
1856
1857                 if (WaitTillCardIsFree(base))
1858                         goto errrelfw;
1859
1860                 if ((status = inw(base + 0x4)) != 0) {
1861                         dev_err(&pdev->dev, "Card%d verify got out of sync. "
1862                                 "Card Status:0x%x\n", index + 1, status);
1863                         goto errrelfw;
1864                 }
1865         }
1866
1867         board->status |= FIRMWARE_LOADED;
1868         retval = 0;
1869
1870 errrelfw:
1871         release_firmware(fw);
1872 end:
1873         return retval;
1874 }
1875
1876 /*
1877  *      Insmod can set static symbols so keep these static
1878  */
1879 static int io[4];
1880 static int irq[4];
1881 static int card;
1882
1883 static int __devinit isicom_probe(struct pci_dev *pdev,
1884         const struct pci_device_id *ent)
1885 {
1886         unsigned int ioaddr, signature, index;
1887         int retval = -EPERM;
1888         u8 pciirq;
1889         struct isi_board *board = NULL;
1890
1891         if (card >= BOARD_COUNT)
1892                 goto err;
1893
1894         ioaddr = pci_resource_start(pdev, 3);
1895         /* i.e at offset 0x1c in the PCI configuration register space. */
1896         pciirq = pdev->irq;
1897         dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
1898
1899         /* allot the first empty slot in the array */
1900         for (index = 0; index < BOARD_COUNT; index++)
1901                 if (isi_card[index].base == 0) {
1902                         board = &isi_card[index];
1903                         break;
1904                 }
1905
1906         board->base = ioaddr;
1907         board->irq = pciirq;
1908         board->isa = NO;
1909         card++;
1910
1911         pci_set_drvdata(pdev, board);
1912
1913         retval = isicom_register_ioregion(pdev, index);
1914         if (retval < 0)
1915                 goto err;
1916
1917         retval = isicom_register_isr(pdev, index);
1918         if (retval < 0)
1919                 goto errunrr;
1920
1921         retval = reset_card(pdev, index, &signature);
1922         if (retval < 0)
1923                 goto errunri;
1924
1925         retval = load_firmware(pdev, index, signature);
1926         if (retval < 0)
1927                 goto errunri;
1928
1929         return 0;
1930
1931 errunri:
1932         free_irq(board->irq, board);
1933 errunrr:
1934         isicom_unregister_ioregion(pdev);
1935 err:
1936         board->base = 0;
1937         return retval;
1938 }
1939
1940 static void __devexit isicom_remove(struct pci_dev *pdev)
1941 {
1942         struct isi_board *board = pci_get_drvdata(pdev);
1943
1944         free_irq(board->irq, board);
1945         isicom_unregister_ioregion(pdev);
1946 }
1947
1948 static int __devinit isicom_setup(void)
1949 {
1950         int retval, idx, channel;
1951         struct isi_port *port;
1952
1953         card = 0;
1954         memset(isi_ports, 0, sizeof(isi_ports));
1955
1956         for(idx = 0; idx < BOARD_COUNT; idx++) {
1957                 port = &isi_ports[idx * 16];
1958                 isi_card[idx].ports = port;
1959                 spin_lock_init(&isi_card[idx].card_lock);
1960                 for (channel = 0; channel < 16; channel++, port++) {
1961                         port->magic = ISICOM_MAGIC;
1962                         port->card = &isi_card[idx];
1963                         port->channel = channel;
1964                         port->close_delay = 50 * HZ/100;
1965                         port->closing_wait = 3000 * HZ/100;
1966                         INIT_WORK(&port->hangup_tq, do_isicom_hangup, port);
1967                         INIT_WORK(&port->bh_tqueue, isicom_bottomhalf, port);
1968                         port->status = 0;
1969                         init_waitqueue_head(&port->open_wait);
1970                         init_waitqueue_head(&port->close_wait);
1971                         /*  . . .  */
1972                 }
1973                 isi_card[idx].base = 0;
1974                 isi_card[idx].irq = 0;
1975
1976                 if (!io[idx])
1977                         continue;
1978
1979                 if (irq[idx] == 2 || irq[idx] == 3 || irq[idx] == 4     ||
1980                                 irq[idx] == 5   || irq[idx] == 7        ||
1981                                 irq[idx] == 10  || irq[idx] == 11       ||
1982                                 irq[idx] == 12  || irq[idx] == 15) {
1983                         printk(KERN_ERR "ISICOM: ISA not supported yet.\n");
1984                         retval = -EINVAL;
1985                         goto error;
1986                 } else
1987                         printk(KERN_ERR "ISICOM: Irq %d unsupported. "
1988                                 "Disabling Card%d...\n", irq[idx], idx + 1);
1989         }
1990
1991         retval = isicom_register_tty_driver();
1992         if (retval < 0)
1993                 goto error;
1994
1995         retval = pci_register_driver(&isicom_driver);
1996         if (retval < 0) {
1997                 printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
1998                 goto errtty;
1999         }
2000
2001         init_timer(&tx);
2002         tx.expires = jiffies + 1;
2003         tx.data = 0;
2004         tx.function = isicom_tx;
2005         re_schedule = 1;
2006         add_timer(&tx);
2007
2008         return 0;
2009 errtty:
2010         isicom_unregister_tty_driver();
2011 error:
2012         return retval;
2013 }
2014
2015 static void __exit isicom_exit(void)
2016 {
2017         unsigned int index = 0;
2018
2019         re_schedule = 0;
2020
2021         while (re_schedule != 2 && index++ < 100)
2022                 msleep(10);
2023
2024         pci_unregister_driver(&isicom_driver);
2025         isicom_unregister_tty_driver();
2026 }
2027
2028 module_init(isicom_setup);
2029 module_exit(isicom_exit);
2030
2031 MODULE_AUTHOR("MultiTech");
2032 MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
2033 MODULE_LICENSE("GPL");
2034 module_param_array(io, int, NULL, 0);
2035 MODULE_PARM_DESC(io, "I/O ports for the cards");
2036 module_param_array(irq, int, NULL, 0);
2037 MODULE_PARM_DESC(irq, "Interrupts for the cards");