git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/ath5k/base.c

   1 /*-
   2  * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
   3  * Copyright (c) 2004-2005 Atheros Communications, Inc.
   4  * Copyright (c) 2006 Devicescape Software, Inc.
   5  * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
   6  * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
   7  *
   8  * All rights reserved.
   9  *
  10  * Redistribution and use in source and binary forms, with or without
  11  * modification, are permitted provided that the following conditions
  12  * are met:
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer,
  15  *    without modification.
  16  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  17  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
  18  *    redistribution must be conditioned upon including a substantially
  19  *    similar Disclaimer requirement for further binary redistribution.
  20  * 3. Neither the names of the above-listed copyright holders nor the names
  21  *    of any contributors may be used to endorse or promote products derived
  22  *    from this software without specific prior written permission.
  23  *
  24  * Alternatively, this software may be distributed under the terms of the
  25  * GNU General Public License ("GPL") version 2 as published by the Free
  26  * Software Foundation.
  27  *
  28  * NO WARRANTY
  29  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  30  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  31  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
  32  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
  33  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
  34  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  35  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  36  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
  37  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  38  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
  39  * THE POSSIBILITY OF SUCH DAMAGES.
  40  *
  41  */
  42
  43 #include <linux/module.h>
  44 #include <linux/delay.h>
  45 #include <linux/hardirq.h>
  46 #include <linux/if.h>
  47 #include <linux/io.h>
  48 #include <linux/netdevice.h>
  49 #include <linux/cache.h>
  50 #include <linux/pci.h>
  51 #include <linux/ethtool.h>
  52 #include <linux/uaccess.h>
  53
  54 #include <net/ieee80211_radiotap.h>
  55
  56 #include <asm/unaligned.h>
  57
  58 #include "base.h"
  59 #include "reg.h"
  60 #include "debug.h"
  61
  62 static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
  63 static int modparam_nohwcrypt;
  64 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
  65 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  66
  67
  68 /******************\
  69 * Internal defines *
  70 \******************/
  71
  72 /* Module info */
  73 MODULE_AUTHOR("Jiri Slaby");
  74 MODULE_AUTHOR("Nick Kossifidis");
  75 MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
  76 MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
  77 MODULE_LICENSE("Dual BSD/GPL");
  78 MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
  79
  80
  81 /* Known PCI ids */
  82 static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
  83         { PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */
  84         { PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */
  85         { PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/
  86         { PCI_VDEVICE(ATHEROS, 0x0012), .driver_data = AR5K_AR5211 }, /* 5211 */
  87         { PCI_VDEVICE(ATHEROS, 0x0013), .driver_data = AR5K_AR5212 }, /* 5212 */
  88         { PCI_VDEVICE(3COM_2,  0x0013), .driver_data = AR5K_AR5212 }, /* 3com 5212 */
  89         { PCI_VDEVICE(3COM,    0x0013), .driver_data = AR5K_AR5212 }, /* 3com 3CRDAG675 5212 */
  90         { PCI_VDEVICE(ATHEROS, 0x1014), .driver_data = AR5K_AR5212 }, /* IBM minipci 5212 */
  91         { PCI_VDEVICE(ATHEROS, 0x0014), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
  92         { PCI_VDEVICE(ATHEROS, 0x0015), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
  93         { PCI_VDEVICE(ATHEROS, 0x0016), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
  94         { PCI_VDEVICE(ATHEROS, 0x0017), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
  95         { PCI_VDEVICE(ATHEROS, 0x0018), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
  96         { PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
  97         { PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
  98         { PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
  99         { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */
 100         { PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */
 101         { 0 }
 102 };
 103 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
 104
 105 /* Known SREVs */
 106 static struct ath5k_srev_name srev_names[] = {
 107         { "5210",       AR5K_VERSION_MAC,       AR5K_SREV_AR5210 },
 108         { "5311",       AR5K_VERSION_MAC,       AR5K_SREV_AR5311 },
 109         { "5311A",      AR5K_VERSION_MAC,       AR5K_SREV_AR5311A },
 110         { "5311B",      AR5K_VERSION_MAC,       AR5K_SREV_AR5311B },
 111         { "5211",       AR5K_VERSION_MAC,       AR5K_SREV_AR5211 },
 112         { "5212",       AR5K_VERSION_MAC,       AR5K_SREV_AR5212 },
 113         { "5213",       AR5K_VERSION_MAC,       AR5K_SREV_AR5213 },
 114         { "5213A",      AR5K_VERSION_MAC,       AR5K_SREV_AR5213A },
 115         { "2413",       AR5K_VERSION_MAC,       AR5K_SREV_AR2413 },
 116         { "2414",       AR5K_VERSION_MAC,       AR5K_SREV_AR2414 },
 117         { "5424",       AR5K_VERSION_MAC,       AR5K_SREV_AR5424 },
 118         { "5413",       AR5K_VERSION_MAC,       AR5K_SREV_AR5413 },
 119         { "5414",       AR5K_VERSION_MAC,       AR5K_SREV_AR5414 },
 120         { "2415",       AR5K_VERSION_MAC,       AR5K_SREV_AR2415 },
 121         { "5416",       AR5K_VERSION_MAC,       AR5K_SREV_AR5416 },
 122         { "5418",       AR5K_VERSION_MAC,       AR5K_SREV_AR5418 },
 123         { "2425",       AR5K_VERSION_MAC,       AR5K_SREV_AR2425 },
 124         { "2417",       AR5K_VERSION_MAC,       AR5K_SREV_AR2417 },
 125         { "xxxxx",      AR5K_VERSION_MAC,       AR5K_SREV_UNKNOWN },
 126         { "5110",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5110 },
 127         { "5111",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5111 },
 128         { "5111A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5111A },
 129         { "2111",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2111 },
 130         { "5112",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112 },
 131         { "5112A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112A },
 132         { "5112B",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112B },
 133         { "2112",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112 },
 134         { "2112A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112A },
 135         { "2112B",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112B },
 136         { "2413",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2413 },
 137         { "5413",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5413 },
 138         { "2316",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2316 },
 139         { "2317",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2317 },
 140         { "5424",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5424 },
 141         { "5133",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5133 },
 142         { "xxxxx",      AR5K_VERSION_RAD,       AR5K_SREV_UNKNOWN },
 143 };
 144
 145 static struct ieee80211_rate ath5k_rates[] = {
 146         { .bitrate = 10,
 147           .hw_value = ATH5K_RATE_CODE_1M, },
 148         { .bitrate = 20,
 149           .hw_value = ATH5K_RATE_CODE_2M,
 150           .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
 151           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 152         { .bitrate = 55,
 153           .hw_value = ATH5K_RATE_CODE_5_5M,
 154           .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
 155           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 156         { .bitrate = 110,
 157           .hw_value = ATH5K_RATE_CODE_11M,
 158           .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
 159           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 160         { .bitrate = 60,
 161           .hw_value = ATH5K_RATE_CODE_6M,
 162           .flags = 0 },
 163         { .bitrate = 90,
 164           .hw_value = ATH5K_RATE_CODE_9M,
 165           .flags = 0 },
 166         { .bitrate = 120,
 167           .hw_value = ATH5K_RATE_CODE_12M,
 168           .flags = 0 },
 169         { .bitrate = 180,
 170           .hw_value = ATH5K_RATE_CODE_18M,
 171           .flags = 0 },
 172         { .bitrate = 240,
 173           .hw_value = ATH5K_RATE_CODE_24M,
 174           .flags = 0 },
 175         { .bitrate = 360,
 176           .hw_value = ATH5K_RATE_CODE_36M,
 177           .flags = 0 },
 178         { .bitrate = 480,
 179           .hw_value = ATH5K_RATE_CODE_48M,
 180           .flags = 0 },
 181         { .bitrate = 540,
 182           .hw_value = ATH5K_RATE_CODE_54M,
 183           .flags = 0 },
 184         /* XR missing */
 185 };
 186
 187 /*
 188  * Prototypes - PCI stack related functions
 189  */
 190 static int __devinit    ath5k_pci_probe(struct pci_dev *pdev,
 191                                 const struct pci_device_id *id);
 192 static void __devexit   ath5k_pci_remove(struct pci_dev *pdev);
 193 #ifdef CONFIG_PM
 194 static int              ath5k_pci_suspend(struct pci_dev *pdev,
 195                                         pm_message_t state);
 196 static int              ath5k_pci_resume(struct pci_dev *pdev);
 197 #else
 198 #define ath5k_pci_suspend NULL
 199 #define ath5k_pci_resume NULL
 200 #endif /* CONFIG_PM */
 201
 202 static struct pci_driver ath5k_pci_driver = {
 203         .name           = "ath5k_pci",
 204         .id_table       = ath5k_pci_id_table,
 205         .probe          = ath5k_pci_probe,
 206         .remove         = __devexit_p(ath5k_pci_remove),
 207         .suspend        = ath5k_pci_suspend,
 208         .resume         = ath5k_pci_resume,
 209 };
 210
 211
 212
 213 /*
 214  * Prototypes - MAC 802.11 stack related functions
 215  */
 216 static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
 217 static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
 218 static int ath5k_reset_wake(struct ath5k_softc *sc);
 219 static int ath5k_start(struct ieee80211_hw *hw);
 220 static void ath5k_stop(struct ieee80211_hw *hw);
 221 static int ath5k_add_interface(struct ieee80211_hw *hw,
 222                 struct ieee80211_if_init_conf *conf);
 223 static void ath5k_remove_interface(struct ieee80211_hw *hw,
 224                 struct ieee80211_if_init_conf *conf);
 225 static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
 226 static int ath5k_config_interface(struct ieee80211_hw *hw,
 227                 struct ieee80211_vif *vif,
 228                 struct ieee80211_if_conf *conf);
 229 static void ath5k_configure_filter(struct ieee80211_hw *hw,
 230                 unsigned int changed_flags,
 231                 unsigned int *new_flags,
 232                 int mc_count, struct dev_mc_list *mclist);
 233 static int ath5k_set_key(struct ieee80211_hw *hw,
 234                 enum set_key_cmd cmd,
 235                 const u8 *local_addr, const u8 *addr,
 236                 struct ieee80211_key_conf *key);
 237 static int ath5k_get_stats(struct ieee80211_hw *hw,
 238                 struct ieee80211_low_level_stats *stats);
 239 static int ath5k_get_tx_stats(struct ieee80211_hw *hw,
 240                 struct ieee80211_tx_queue_stats *stats);
 241 static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
 242 static void ath5k_reset_tsf(struct ieee80211_hw *hw);
 243 static int ath5k_beacon_update(struct ath5k_softc *sc, struct sk_buff *skb);
 244
 245 static struct ieee80211_ops ath5k_hw_ops = {
 246         .tx             = ath5k_tx,
 247         .start          = ath5k_start,
 248         .stop           = ath5k_stop,
 249         .add_interface  = ath5k_add_interface,
 250         .remove_interface = ath5k_remove_interface,
 251         .config         = ath5k_config,
 252         .config_interface = ath5k_config_interface,
 253         .configure_filter = ath5k_configure_filter,
 254         .set_key        = ath5k_set_key,
 255         .get_stats      = ath5k_get_stats,
 256         .conf_tx        = NULL,
 257         .get_tx_stats   = ath5k_get_tx_stats,
 258         .get_tsf        = ath5k_get_tsf,
 259         .reset_tsf      = ath5k_reset_tsf,
 260 };
 261
 262 /*
 263  * Prototypes - Internal functions
 264  */
 265 /* Attach detach */
 266 static int      ath5k_attach(struct pci_dev *pdev,
 267                         struct ieee80211_hw *hw);
 268 static void     ath5k_detach(struct pci_dev *pdev,
 269                         struct ieee80211_hw *hw);
 270 /* Channel/mode setup */
 271 static inline short ath5k_ieee2mhz(short chan);
 272 static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
 273                                 struct ieee80211_channel *channels,
 274                                 unsigned int mode,
 275                                 unsigned int max);
 276 static int      ath5k_setup_bands(struct ieee80211_hw *hw);
 277 static int      ath5k_chan_set(struct ath5k_softc *sc,
 278                                 struct ieee80211_channel *chan);
 279 static void     ath5k_setcurmode(struct ath5k_softc *sc,
 280                                 unsigned int mode);
 281 static void     ath5k_mode_setup(struct ath5k_softc *sc);
 282
 283 /* Descriptor setup */
 284 static int      ath5k_desc_alloc(struct ath5k_softc *sc,
 285                                 struct pci_dev *pdev);
 286 static void     ath5k_desc_free(struct ath5k_softc *sc,
 287                                 struct pci_dev *pdev);
 288 /* Buffers setup */
 289 static int      ath5k_rxbuf_setup(struct ath5k_softc *sc,
 290                                 struct ath5k_buf *bf);
 291 static int      ath5k_txbuf_setup(struct ath5k_softc *sc,
 292                                 struct ath5k_buf *bf);
 293 static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
 294                                 struct ath5k_buf *bf)
 295 {
 296         BUG_ON(!bf);
 297         if (!bf->skb)
 298                 return;
 299         pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
 300                         PCI_DMA_TODEVICE);
 301         dev_kfree_skb_any(bf->skb);
 302         bf->skb = NULL;
 303 }
 304
 305 /* Queues setup */
 306 static struct   ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
 307                                 int qtype, int subtype);
 308 static int      ath5k_beaconq_setup(struct ath5k_hw *ah);
 309 static int      ath5k_beaconq_config(struct ath5k_softc *sc);
 310 static void     ath5k_txq_drainq(struct ath5k_softc *sc,
 311                                 struct ath5k_txq *txq);
 312 static void     ath5k_txq_cleanup(struct ath5k_softc *sc);
 313 static void     ath5k_txq_release(struct ath5k_softc *sc);
 314 /* Rx handling */
 315 static int      ath5k_rx_start(struct ath5k_softc *sc);
 316 static void     ath5k_rx_stop(struct ath5k_softc *sc);
 317 static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc,
 318                                         struct ath5k_desc *ds,
 319                                         struct sk_buff *skb,
 320                                         struct ath5k_rx_status *rs);
 321 static void     ath5k_tasklet_rx(unsigned long data);
 322 /* Tx handling */
 323 static void     ath5k_tx_processq(struct ath5k_softc *sc,
 324                                 struct ath5k_txq *txq);
 325 static void     ath5k_tasklet_tx(unsigned long data);
 326 /* Beacon handling */
 327 static int      ath5k_beacon_setup(struct ath5k_softc *sc,
 328                                         struct ath5k_buf *bf);
 329 static void     ath5k_beacon_send(struct ath5k_softc *sc);
 330 static void     ath5k_beacon_config(struct ath5k_softc *sc);
 331 static void     ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
 332
 333 static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
 334 {
 335         u64 tsf = ath5k_hw_get_tsf64(ah);
 336
 337         if ((tsf & 0x7fff) < rstamp)
 338                 tsf -= 0x8000;
 339
 340         return (tsf & ~0x7fff) | rstamp;
 341 }
 342
 343 /* Interrupt handling */
 344 static int      ath5k_init(struct ath5k_softc *sc, bool is_resume);
 345 static int      ath5k_stop_locked(struct ath5k_softc *sc);
 346 static int      ath5k_stop_hw(struct ath5k_softc *sc, bool is_suspend);
 347 static irqreturn_t ath5k_intr(int irq, void *dev_id);
 348 static void     ath5k_tasklet_reset(unsigned long data);
 349
 350 static void     ath5k_calibrate(unsigned long data);
 351 /* LED functions */
 352 static int      ath5k_init_leds(struct ath5k_softc *sc);
 353 static void     ath5k_led_enable(struct ath5k_softc *sc);
 354 static void     ath5k_led_off(struct ath5k_softc *sc);
 355 static void     ath5k_unregister_leds(struct ath5k_softc *sc);
 356
 357 /*
 358  * Module init/exit functions
 359  */
 360 static int __init
 361 init_ath5k_pci(void)
 362 {
 363         int ret;
 364
 365         ath5k_debug_init();
 366
 367         ret = pci_register_driver(&ath5k_pci_driver);
 368         if (ret) {
 369                 printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
 370                 return ret;
 371         }
 372
 373         return 0;
 374 }
 375
 376 static void __exit
 377 exit_ath5k_pci(void)
 378 {
 379         pci_unregister_driver(&ath5k_pci_driver);
 380
 381         ath5k_debug_finish();
 382 }
 383
 384 module_init(init_ath5k_pci);
 385 module_exit(exit_ath5k_pci);
 386
 387
 388 /********************\
 389 * PCI Initialization *
 390 \********************/
 391
 392 static const char *
 393 ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
 394 {
 395         const char *name = "xxxxx";
 396         unsigned int i;
 397
 398         for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
 399                 if (srev_names[i].sr_type != type)
 400                         continue;
 401
 402                 if ((val & 0xf0) == srev_names[i].sr_val)
 403                         name = srev_names[i].sr_name;
 404
 405                 if ((val & 0xff) == srev_names[i].sr_val) {
 406                         name = srev_names[i].sr_name;
 407                         break;
 408                 }
 409         }
 410
 411         return name;
 412 }
 413
 414 static int __devinit
 415 ath5k_pci_probe(struct pci_dev *pdev,
 416                 const struct pci_device_id *id)
 417 {
 418         void __iomem *mem;
 419         struct ath5k_softc *sc;
 420         struct ieee80211_hw *hw;
 421         int ret;
 422         u8 csz;
 423
 424         ret = pci_enable_device(pdev);
 425         if (ret) {
 426                 dev_err(&pdev->dev, "can't enable device\n");
 427                 goto err;
 428         }
 429
 430         /* XXX 32-bit addressing only */
 431         ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 432         if (ret) {
 433                 dev_err(&pdev->dev, "32-bit DMA not available\n");
 434                 goto err_dis;
 435         }
 436
 437         /*
 438          * Cache line size is used to size and align various
 439          * structures used to communicate with the hardware.
 440          */
 441         pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
 442         if (csz == 0) {
 443                 /*
 444                  * Linux 2.4.18 (at least) writes the cache line size
 445                  * register as a 16-bit wide register which is wrong.
 446                  * We must have this setup properly for rx buffer
 447                  * DMA to work so force a reasonable value here if it
 448                  * comes up zero.
 449                  */
 450                 csz = L1_CACHE_BYTES / sizeof(u32);
 451                 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
 452         }
 453         /*
 454          * The default setting of latency timer yields poor results,
 455          * set it to the value used by other systems.  It may be worth
 456          * tweaking this setting more.
 457          */
 458         pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
 459
 460         /* Enable bus mastering */
 461         pci_set_master(pdev);
 462
 463         /*
 464          * Disable the RETRY_TIMEOUT register (0x41) to keep
 465          * PCI Tx retries from interfering with C3 CPU state.
 466          */
 467         pci_write_config_byte(pdev, 0x41, 0);
 468
 469         ret = pci_request_region(pdev, 0, "ath5k");
 470         if (ret) {
 471                 dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
 472                 goto err_dis;
 473         }
 474
 475         mem = pci_iomap(pdev, 0, 0);
 476         if (!mem) {
 477                 dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
 478                 ret = -EIO;
 479                 goto err_reg;
 480         }
 481
 482         /*
 483          * Allocate hw (mac80211 main struct)
 484          * and hw->priv (driver private data)
 485          */
 486         hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
 487         if (hw == NULL) {
 488                 dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
 489                 ret = -ENOMEM;
 490                 goto err_map;
 491         }
 492
 493         dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
 494
 495         /* Initialize driver private data */
 496         SET_IEEE80211_DEV(hw, &pdev->dev);
 497         hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 498                     IEEE80211_HW_SIGNAL_DBM |
 499                     IEEE80211_HW_NOISE_DBM;
 500
 501         hw->wiphy->interface_modes =
 502                 BIT(NL80211_IFTYPE_STATION) |
 503                 BIT(NL80211_IFTYPE_ADHOC) |
 504                 BIT(NL80211_IFTYPE_MESH_POINT);
 505
 506         hw->extra_tx_headroom = 2;
 507         hw->channel_change_time = 5000;
 508         sc = hw->priv;
 509         sc->hw = hw;
 510         sc->pdev = pdev;
 511
 512         ath5k_debug_init_device(sc);
 513
 514         /*
 515          * Mark the device as detached to avoid processing
 516          * interrupts until setup is complete.
 517          */
 518         __set_bit(ATH_STAT_INVALID, sc->status);
 519
 520         sc->iobase = mem; /* So we can unmap it on detach */
 521         sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
 522         sc->opmode = NL80211_IFTYPE_STATION;
 523         mutex_init(&sc->lock);
 524         spin_lock_init(&sc->rxbuflock);
 525         spin_lock_init(&sc->txbuflock);
 526         spin_lock_init(&sc->block);
 527
 528         /* Set private data */
 529         pci_set_drvdata(pdev, hw);
 530
 531         /* Setup interrupt handler */
 532         ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
 533         if (ret) {
 534                 ATH5K_ERR(sc, "request_irq failed\n");
 535                 goto err_free;
 536         }
 537
 538         /* Initialize device */
 539         sc->ah = ath5k_hw_attach(sc, id->driver_data);
 540         if (IS_ERR(sc->ah)) {
 541                 ret = PTR_ERR(sc->ah);
 542                 goto err_irq;
 543         }
 544
 545         /* set up multi-rate retry capabilities */
 546         if (sc->ah->ah_version == AR5K_AR5212) {
 547                 hw->max_rates = 4;
 548                 hw->max_rate_tries = 11;
 549         }
 550
 551         /* Finish private driver data initialization */
 552         ret = ath5k_attach(pdev, hw);
 553         if (ret)
 554                 goto err_ah;
 555
 556         ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
 557                         ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
 558                                         sc->ah->ah_mac_srev,
 559                                         sc->ah->ah_phy_revision);
 560
 561         if (!sc->ah->ah_single_chip) {
 562                 /* Single chip radio (!RF5111) */
 563                 if (sc->ah->ah_radio_5ghz_revision &&
 564                         !sc->ah->ah_radio_2ghz_revision) {
 565                         /* No 5GHz support -> report 2GHz radio */
 566                         if (!test_bit(AR5K_MODE_11A,
 567                                 sc->ah->ah_capabilities.cap_mode)) {
 568                                 ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
 569                                         ath5k_chip_name(AR5K_VERSION_RAD,
 570                                                 sc->ah->ah_radio_5ghz_revision),
 571                                                 sc->ah->ah_radio_5ghz_revision);
 572                         /* No 2GHz support (5110 and some
 573                          * 5Ghz only cards) -> report 5Ghz radio */
 574                         } else if (!test_bit(AR5K_MODE_11B,
 575                                 sc->ah->ah_capabilities.cap_mode)) {
 576                                 ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
 577                                         ath5k_chip_name(AR5K_VERSION_RAD,
 578                                                 sc->ah->ah_radio_5ghz_revision),
 579                                                 sc->ah->ah_radio_5ghz_revision);
 580                         /* Multiband radio */
 581                         } else {
 582                                 ATH5K_INFO(sc, "RF%s multiband radio found"
 583                                         " (0x%x)\n",
 584                                         ath5k_chip_name(AR5K_VERSION_RAD,
 585                                                 sc->ah->ah_radio_5ghz_revision),
 586                                                 sc->ah->ah_radio_5ghz_revision);
 587                         }
 588                 }
 589                 /* Multi chip radio (RF5111 - RF2111) ->
 590                  * report both 2GHz/5GHz radios */
 591                 else if (sc->ah->ah_radio_5ghz_revision &&
 592                                 sc->ah->ah_radio_2ghz_revision){
 593                         ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
 594                                 ath5k_chip_name(AR5K_VERSION_RAD,
 595                                         sc->ah->ah_radio_5ghz_revision),
 596                                         sc->ah->ah_radio_5ghz_revision);
 597                         ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
 598                                 ath5k_chip_name(AR5K_VERSION_RAD,
 599                                         sc->ah->ah_radio_2ghz_revision),
 600                                         sc->ah->ah_radio_2ghz_revision);
 601                 }
 602         }
 603
 604
 605         /* ready to process interrupts */
 606         __clear_bit(ATH_STAT_INVALID, sc->status);
 607
 608         return 0;
 609 err_ah:
 610         ath5k_hw_detach(sc->ah);
 611 err_irq:
 612         free_irq(pdev->irq, sc);
 613 err_free:
 614         ieee80211_free_hw(hw);
 615 err_map:
 616         pci_iounmap(pdev, mem);
 617 err_reg:
 618         pci_release_region(pdev, 0);
 619 err_dis:
 620         pci_disable_device(pdev);
 621 err:
 622         return ret;
 623 }
 624
 625 static void __devexit
 626 ath5k_pci_remove(struct pci_dev *pdev)
 627 {
 628         struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 629         struct ath5k_softc *sc = hw->priv;
 630
 631         ath5k_debug_finish_device(sc);
 632         ath5k_detach(pdev, hw);
 633         ath5k_hw_detach(sc->ah);
 634         free_irq(pdev->irq, sc);
 635         pci_iounmap(pdev, sc->iobase);
 636         pci_release_region(pdev, 0);
 637         pci_disable_device(pdev);
 638         ieee80211_free_hw(hw);
 639 }
 640
 641 #ifdef CONFIG_PM
 642 static int
 643 ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 644 {
 645         struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 646         struct ath5k_softc *sc = hw->priv;
 647
 648         ath5k_led_off(sc);
 649
 650         ath5k_stop_hw(sc, true);
 651
 652         free_irq(pdev->irq, sc);
 653         pci_save_state(pdev);
 654         pci_disable_device(pdev);
 655         pci_set_power_state(pdev, PCI_D3hot);
 656
 657         return 0;
 658 }
 659
 660 static int
 661 ath5k_pci_resume(struct pci_dev *pdev)
 662 {
 663         struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 664         struct ath5k_softc *sc = hw->priv;
 665         int err;
 666
 667         pci_restore_state(pdev);
 668
 669         err = pci_enable_device(pdev);
 670         if (err)
 671                 return err;
 672
 673         /*
 674          * Suspend/Resume resets the PCI configuration space, so we have to
 675          * re-disable the RETRY_TIMEOUT register (0x41) to keep
 676          * PCI Tx retries from interfering with C3 CPU state
 677          */
 678         pci_write_config_byte(pdev, 0x41, 0);
 679
 680         err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
 681         if (err) {
 682                 ATH5K_ERR(sc, "request_irq failed\n");
 683                 goto err_no_irq;
 684         }
 685
 686         err = ath5k_init(sc, true);
 687         if (err)
 688                 goto err_irq;
 689         ath5k_led_enable(sc);
 690
 691         return 0;
 692 err_irq:
 693         free_irq(pdev->irq, sc);
 694 err_no_irq:
 695         pci_disable_device(pdev);
 696         return err;
 697 }
 698 #endif /* CONFIG_PM */
 699
 700
 701 /***********************\
 702 * Driver Initialization *
 703 \***********************/
 704
 705 static int
 706 ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 707 {
 708         struct ath5k_softc *sc = hw->priv;
 709         struct ath5k_hw *ah = sc->ah;
 710         u8 mac[ETH_ALEN];
 711         int ret;
 712
 713         ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
 714
 715         /*
 716          * Check if the MAC has multi-rate retry support.
 717          * We do this by trying to setup a fake extended
 718          * descriptor.  MAC's that don't have support will
 719          * return false w/o doing anything.  MAC's that do
 720          * support it will return true w/o doing anything.
 721          */
 722         ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
 723         if (ret < 0)
 724                 goto err;
 725         if (ret > 0)
 726                 __set_bit(ATH_STAT_MRRETRY, sc->status);
 727
 728         /*
 729          * Collect the channel list.  The 802.11 layer
 730          * is resposible for filtering this list based
 731          * on settings like the phy mode and regulatory
 732          * domain restrictions.
 733          */
 734         ret = ath5k_setup_bands(hw);
 735         if (ret) {
 736                 ATH5K_ERR(sc, "can't get channels\n");
 737                 goto err;
 738         }
 739
 740         /* NB: setup here so ath5k_rate_update is happy */
 741         if (test_bit(AR5K_MODE_11A, ah->ah_modes))
 742                 ath5k_setcurmode(sc, AR5K_MODE_11A);
 743         else
 744                 ath5k_setcurmode(sc, AR5K_MODE_11B);
 745
 746         /*
 747          * Allocate tx+rx descriptors and populate the lists.
 748          */
 749         ret = ath5k_desc_alloc(sc, pdev);
 750         if (ret) {
 751                 ATH5K_ERR(sc, "can't allocate descriptors\n");
 752                 goto err;
 753         }
 754
 755         /*
 756          * Allocate hardware transmit queues: one queue for
 757          * beacon frames and one data queue for each QoS
 758          * priority.  Note that hw functions handle reseting
 759          * these queues at the needed time.
 760          */
 761         ret = ath5k_beaconq_setup(ah);
 762         if (ret < 0) {
 763                 ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
 764                 goto err_desc;
 765         }
 766         sc->bhalq = ret;
 767
 768         sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
 769         if (IS_ERR(sc->txq)) {
 770                 ATH5K_ERR(sc, "can't setup xmit queue\n");
 771                 ret = PTR_ERR(sc->txq);
 772                 goto err_bhal;
 773         }
 774
 775         tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
 776         tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
 777         tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
 778         setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
 779
 780         ath5k_hw_get_lladdr(ah, mac);
 781         SET_IEEE80211_PERM_ADDR(hw, mac);
 782         /* All MAC address bits matter for ACKs */
 783         memset(sc->bssidmask, 0xff, ETH_ALEN);
 784         ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
 785
 786         ret = ieee80211_register_hw(hw);
 787         if (ret) {
 788                 ATH5K_ERR(sc, "can't register ieee80211 hw\n");
 789                 goto err_queues;
 790         }
 791
 792         ath5k_init_leds(sc);
 793
 794         return 0;
 795 err_queues:
 796         ath5k_txq_release(sc);
 797 err_bhal:
 798         ath5k_hw_release_tx_queue(ah, sc->bhalq);
 799 err_desc:
 800         ath5k_desc_free(sc, pdev);
 801 err:
 802         return ret;
 803 }
 804
 805 static void
 806 ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 807 {
 808         struct ath5k_softc *sc = hw->priv;
 809
 810         /*
 811          * NB: the order of these is important:
 812          * o call the 802.11 layer before detaching ath5k_hw to
 813          *   insure callbacks into the driver to delete global
 814          *   key cache entries can be handled
 815          * o reclaim the tx queue data structures after calling
 816          *   the 802.11 layer as we'll get called back to reclaim
 817          *   node state and potentially want to use them
 818          * o to cleanup the tx queues the hal is called, so detach
 819          *   it last
 820          * XXX: ??? detach ath5k_hw ???
 821          * Other than that, it's straightforward...
 822          */
 823         ieee80211_unregister_hw(hw);
 824         ath5k_desc_free(sc, pdev);
 825         ath5k_txq_release(sc);
 826         ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
 827         ath5k_unregister_leds(sc);
 828
 829         /*
 830          * NB: can't reclaim these until after ieee80211_ifdetach
 831          * returns because we'll get called back to reclaim node
 832          * state and potentially want to use them.
 833          */
 834 }
 835
 836
 837
 838
 839 /********************\
 840 * Channel/mode setup *
 841 \********************/
 842
 843 /*
 844  * Convert IEEE channel number to MHz frequency.
 845  */
 846 static inline short
 847 ath5k_ieee2mhz(short chan)
 848 {
 849         if (chan <= 14 || chan >= 27)
 850                 return ieee80211chan2mhz(chan);
 851         else
 852                 return 2212 + chan * 20;
 853 }
 854
 855 static unsigned int
 856 ath5k_copy_channels(struct ath5k_hw *ah,
 857                 struct ieee80211_channel *channels,
 858                 unsigned int mode,
 859                 unsigned int max)
 860 {
 861         unsigned int i, count, size, chfreq, freq, ch;
 862
 863         if (!test_bit(mode, ah->ah_modes))
 864                 return 0;
 865
 866         switch (mode) {
 867         case AR5K_MODE_11A:
 868         case AR5K_MODE_11A_TURBO:
 869                 /* 1..220, but 2GHz frequencies are filtered by check_channel */
 870                 size = 220 ;
 871                 chfreq = CHANNEL_5GHZ;
 872                 break;
 873         case AR5K_MODE_11B:
 874         case AR5K_MODE_11G:
 875         case AR5K_MODE_11G_TURBO:
 876                 size = 26;
 877                 chfreq = CHANNEL_2GHZ;
 878                 break;
 879         default:
 880                 ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
 881                 return 0;
 882         }
 883
 884         for (i = 0, count = 0; i < size && max > 0; i++) {
 885                 ch = i + 1 ;
 886                 freq = ath5k_ieee2mhz(ch);
 887
 888                 /* Check if channel is supported by the chipset */
 889                 if (!ath5k_channel_ok(ah, freq, chfreq))
 890                         continue;
 891
 892                 /* Write channel info and increment counter */
 893                 channels[count].center_freq = freq;
 894                 channels[count].band = (chfreq == CHANNEL_2GHZ) ?
 895                         IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
 896                 switch (mode) {
 897                 case AR5K_MODE_11A:
 898                 case AR5K_MODE_11G:
 899                         channels[count].hw_value = chfreq | CHANNEL_OFDM;
 900                         break;
 901                 case AR5K_MODE_11A_TURBO:
 902                 case AR5K_MODE_11G_TURBO:
 903                         channels[count].hw_value = chfreq |
 904                                 CHANNEL_OFDM | CHANNEL_TURBO;
 905                         break;
 906                 case AR5K_MODE_11B:
 907                         channels[count].hw_value = CHANNEL_B;
 908                 }
 909
 910                 count++;
 911                 max--;
 912         }
 913
 914         return count;
 915 }
 916
 917 static void
 918 ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
 919 {
 920         u8 i;
 921
 922         for (i = 0; i < AR5K_MAX_RATES; i++)
 923                 sc->rate_idx[b->band][i] = -1;
 924
 925         for (i = 0; i < b->n_bitrates; i++) {
 926                 sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
 927                 if (b->bitrates[i].hw_value_short)
 928                         sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
 929         }
 930 }
 931
 932 static int
 933 ath5k_setup_bands(struct ieee80211_hw *hw)
 934 {
 935         struct ath5k_softc *sc = hw->priv;
 936         struct ath5k_hw *ah = sc->ah;
 937         struct ieee80211_supported_band *sband;
 938         int max_c, count_c = 0;
 939         int i;
 940
 941         BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
 942         max_c = ARRAY_SIZE(sc->channels);
 943
 944         /* 2GHz band */
 945         sband = &sc->sbands[IEEE80211_BAND_2GHZ];
 946         sband->band = IEEE80211_BAND_2GHZ;
 947         sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
 948
 949         if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
 950                 /* G mode */
 951                 memcpy(sband->bitrates, &ath5k_rates[0],
 952                        sizeof(struct ieee80211_rate) * 12);
 953                 sband->n_bitrates = 12;
 954
 955                 sband->channels = sc->channels;
 956                 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
 957                                         AR5K_MODE_11G, max_c);
 958
 959                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
 960                 count_c = sband->n_channels;
 961                 max_c -= count_c;
 962         } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
 963                 /* B mode */
 964                 memcpy(sband->bitrates, &ath5k_rates[0],
 965                        sizeof(struct ieee80211_rate) * 4);
 966                 sband->n_bitrates = 4;
 967
 968                 /* 5211 only supports B rates and uses 4bit rate codes
 969                  * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
 970                  * fix them up here:
 971                  */
 972                 if (ah->ah_version == AR5K_AR5211) {
 973                         for (i = 0; i < 4; i++) {
 974                                 sband->bitrates[i].hw_value =
 975                                         sband->bitrates[i].hw_value & 0xF;
 976                                 sband->bitrates[i].hw_value_short =
 977                                         sband->bitrates[i].hw_value_short & 0xF;
 978                         }
 979                 }
 980
 981                 sband->channels = sc->channels;
 982                 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
 983                                         AR5K_MODE_11B, max_c);
 984
 985                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
 986                 count_c = sband->n_channels;
 987                 max_c -= count_c;
 988         }
 989         ath5k_setup_rate_idx(sc, sband);
 990
 991         /* 5GHz band, A mode */
 992         if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
 993                 sband = &sc->sbands[IEEE80211_BAND_5GHZ];
 994                 sband->band = IEEE80211_BAND_5GHZ;
 995                 sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
 996
 997                 memcpy(sband->bitrates, &ath5k_rates[4],
 998                        sizeof(struct ieee80211_rate) * 8);
 999                 sband->n_bitrates = 8;
1000
1001                 sband->channels = &sc->channels[count_c];
1002                 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
1003                                         AR5K_MODE_11A, max_c);
1004
1005                 hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
1006         }
1007         ath5k_setup_rate_idx(sc, sband);
1008
1009         ath5k_debug_dump_bands(sc);
1010
1011         return 0;
1012 }
1013
1014 /*
1015  * Set/change channels.  If the channel is really being changed,
1016  * it's done by reseting the chip.  To accomplish this we must
1017  * first cleanup any pending DMA, then restart stuff after a la
1018  * ath5k_init.
1019  */
1020 static int
1021 ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
1022 {
1023         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n",
1024                 sc->curchan->center_freq, chan->center_freq);
1025
1026         if (chan->center_freq != sc->curchan->center_freq ||
1027                 chan->hw_value != sc->curchan->hw_value) {
1028
1029                 sc->curchan = chan;
1030                 sc->curband = &sc->sbands[chan->band];
1031
1032                 /*
1033                  * To switch channels clear any pending DMA operations;
1034                  * wait long enough for the RX fifo to drain, reset the
1035                  * hardware at the new frequency, and then re-enable
1036                  * the relevant bits of the h/w.
1037                  */
1038                 return ath5k_reset(sc, true, true);
1039         }
1040
1041         return 0;
1042 }
1043
1044 static void
1045 ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
1046 {
1047         sc->curmode = mode;
1048
1049         if (mode == AR5K_MODE_11A) {
1050                 sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ];
1051         } else {
1052                 sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ];
1053         }
1054 }
1055
1056 static void
1057 ath5k_mode_setup(struct ath5k_softc *sc)
1058 {
1059         struct ath5k_hw *ah = sc->ah;
1060         u32 rfilt;
1061
1062         /* configure rx filter */
1063         rfilt = sc->filter_flags;
1064         ath5k_hw_set_rx_filter(ah, rfilt);
1065
1066         if (ath5k_hw_hasbssidmask(ah))
1067                 ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
1068
1069         /* configure operational mode */
1070         ath5k_hw_set_opmode(ah);
1071
1072         ath5k_hw_set_mcast_filter(ah, 0, 0);
1073         ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
1074 }
1075
1076 static inline int
1077 ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
1078 {
1079         WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES);
1080         return sc->rate_idx[sc->curband->band][hw_rix];
1081 }
1082
1083 /***************\
1084 * Buffers setup *
1085 \***************/
1086
1087 static int
1088 ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
1089 {
1090         struct ath5k_hw *ah = sc->ah;
1091         struct sk_buff *skb = bf->skb;
1092         struct ath5k_desc *ds;
1093
1094         if (likely(skb == NULL)) {
1095                 unsigned int off;
1096
1097                 /*
1098                  * Allocate buffer with headroom_needed space for the
1099                  * fake physical layer header at the start.
1100                  */
1101                 skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
1102                 if (unlikely(skb == NULL)) {
1103                         ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
1104                                         sc->rxbufsize + sc->cachelsz - 1);
1105                         return -ENOMEM;
1106                 }
1107                 /*
1108                  * Cache-line-align.  This is important (for the
1109                  * 5210 at least) as not doing so causes bogus data
1110                  * in rx'd frames.
1111                  */
1112                 off = ((unsigned long)skb->data) % sc->cachelsz;
1113                 if (off != 0)
1114                         skb_reserve(skb, sc->cachelsz - off);
1115
1116                 bf->skb = skb;
1117                 bf->skbaddr = pci_map_single(sc->pdev,
1118                         skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
1119                 if (unlikely(pci_dma_mapping_error(sc->pdev, bf->skbaddr))) {
1120                         ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
1121                         dev_kfree_skb(skb);
1122                         bf->skb = NULL;
1123                         return -ENOMEM;
1124                 }
1125         }
1126
1127         /*
1128          * Setup descriptors.  For receive we always terminate
1129          * the descriptor list with a self-linked entry so we'll
1130          * not get overrun under high load (as can happen with a
1131          * 5212 when ANI processing enables PHY error frames).
1132          *
1133          * To insure the last descriptor is self-linked we create
1134          * each descriptor as self-linked and add it to the end.  As
1135          * each additional descriptor is added the previous self-linked
1136          * entry is ``fixed'' naturally.  This should be safe even
1137          * if DMA is happening.  When processing RX interrupts we
1138          * never remove/process the last, self-linked, entry on the
1139          * descriptor list.  This insures the hardware always has
1140          * someplace to write a new frame.
1141          */
1142         ds = bf->desc;
1143         ds->ds_link = bf->daddr;        /* link to self */
1144         ds->ds_data = bf->skbaddr;
1145         ah->ah_setup_rx_desc(ah, ds,
1146                 skb_tailroom(skb),      /* buffer size */
1147                 0);
1148
1149         if (sc->rxlink != NULL)
1150                 *sc->rxlink = bf->daddr;
1151         sc->rxlink = &ds->ds_link;
1152         return 0;
1153 }
1154
1155 static int
1156 ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
1157 {
1158         struct ath5k_hw *ah = sc->ah;
1159         struct ath5k_txq *txq = sc->txq;
1160         struct ath5k_desc *ds = bf->desc;
1161         struct sk_buff *skb = bf->skb;
1162         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1163         unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
1164         struct ieee80211_rate *rate;
1165         unsigned int mrr_rate[3], mrr_tries[3];
1166         int i, ret;
1167
1168         flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
1169
1170         /* XXX endianness */
1171         bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
1172                         PCI_DMA_TODEVICE);
1173
1174         if (info->flags & IEEE80211_TX_CTL_NO_ACK)
1175                 flags |= AR5K_TXDESC_NOACK;
1176
1177         pktlen = skb->len;
1178
1179         if (info->control.hw_key) {
1180                 keyidx = info->control.hw_key->hw_key_idx;
1181                 pktlen += info->control.hw_key->icv_len;
1182         }
1183         ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
1184                 ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
1185                 (sc->power_level * 2),
1186                 ieee80211_get_tx_rate(sc->hw, info)->hw_value,
1187                 info->control.rates[0].count, keyidx, 0, flags, 0, 0);
1188         if (ret)
1189                 goto err_unmap;
1190
1191         memset(mrr_rate, 0, sizeof(mrr_rate));
1192         memset(mrr_tries, 0, sizeof(mrr_tries));
1193         for (i = 0; i < 3; i++) {
1194                 rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
1195                 if (!rate)
1196                         break;
1197
1198                 mrr_rate[i] = rate->hw_value;
1199                 mrr_tries[i] = info->control.rates[i + 1].count;
1200         }
1201
1202         ah->ah_setup_mrr_tx_desc(ah, ds,
1203                 mrr_rate[0], mrr_tries[0],
1204                 mrr_rate[1], mrr_tries[1],
1205                 mrr_rate[2], mrr_tries[2]);
1206
1207         ds->ds_link = 0;
1208         ds->ds_data = bf->skbaddr;
1209
1210         spin_lock_bh(&txq->lock);
1211         list_add_tail(&bf->list, &txq->q);
1212         sc->tx_stats[txq->qnum].len++;
1213         if (txq->link == NULL) /* is this first packet? */
1214                 ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
1215         else /* no, so only link it */
1216                 *txq->link = bf->daddr;
1217
1218         txq->link = &ds->ds_link;
1219         ath5k_hw_start_tx_dma(ah, txq->qnum);
1220         mmiowb();
1221         spin_unlock_bh(&txq->lock);
1222
1223         return 0;
1224 err_unmap:
1225         pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
1226         return ret;
1227 }
1228
1229 /*******************\
1230 * Descriptors setup *
1231 \*******************/
1232
1233 static int
1234 ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
1235 {
1236         struct ath5k_desc *ds;
1237         struct ath5k_buf *bf;
1238         dma_addr_t da;
1239         unsigned int i;
1240         int ret;
1241
1242         /* allocate descriptors */
1243         sc->desc_len = sizeof(struct ath5k_desc) *
1244                         (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
1245         sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
1246         if (sc->desc == NULL) {
1247                 ATH5K_ERR(sc, "can't allocate descriptors\n");
1248                 ret = -ENOMEM;
1249                 goto err;
1250         }
1251         ds = sc->desc;
1252         da = sc->desc_daddr;
1253         ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
1254                 ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
1255
1256         bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
1257                         sizeof(struct ath5k_buf), GFP_KERNEL);
1258         if (bf == NULL) {
1259                 ATH5K_ERR(sc, "can't allocate bufptr\n");
1260                 ret = -ENOMEM;
1261                 goto err_free;
1262         }
1263         sc->bufptr = bf;
1264
1265         INIT_LIST_HEAD(&sc->rxbuf);
1266         for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
1267                 bf->desc = ds;
1268                 bf->daddr = da;
1269                 list_add_tail(&bf->list, &sc->rxbuf);
1270         }
1271
1272         INIT_LIST_HEAD(&sc->txbuf);
1273         sc->txbuf_len = ATH_TXBUF;
1274         for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
1275                         da += sizeof(*ds)) {
1276                 bf->desc = ds;
1277                 bf->daddr = da;
1278                 list_add_tail(&bf->list, &sc->txbuf);
1279         }
1280
1281         /* beacon buffer */
1282         bf->desc = ds;
1283         bf->daddr = da;
1284         sc->bbuf = bf;
1285
1286         return 0;
1287 err_free:
1288         pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
1289 err:
1290         sc->desc = NULL;
1291         return ret;
1292 }
1293
1294 static void
1295 ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
1296 {
1297         struct ath5k_buf *bf;
1298
1299         ath5k_txbuf_free(sc, sc->bbuf);
1300         list_for_each_entry(bf, &sc->txbuf, list)
1301                 ath5k_txbuf_free(sc, bf);
1302         list_for_each_entry(bf, &sc->rxbuf, list)
1303                 ath5k_txbuf_free(sc, bf);
1304
1305         /* Free memory associated with all descriptors */
1306         pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
1307
1308         kfree(sc->bufptr);
1309         sc->bufptr = NULL;
1310 }
1311
1312
1313
1314
1315
1316 /**************\
1317 * Queues setup *
1318 \**************/
1319
1320 static struct ath5k_txq *
1321 ath5k_txq_setup(struct ath5k_softc *sc,
1322                 int qtype, int subtype)
1323 {
1324         struct ath5k_hw *ah = sc->ah;
1325         struct ath5k_txq *txq;
1326         struct ath5k_txq_info qi = {
1327                 .tqi_subtype = subtype,
1328                 .tqi_aifs = AR5K_TXQ_USEDEFAULT,
1329                 .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
1330                 .tqi_cw_max = AR5K_TXQ_USEDEFAULT
1331         };
1332         int qnum;
1333
1334         /*
1335          * Enable interrupts only for EOL and DESC conditions.
1336          * We mark tx descriptors to receive a DESC interrupt
1337          * when a tx queue gets deep; otherwise waiting for the
1338          * EOL to reap descriptors.  Note that this is done to
1339          * reduce interrupt load and this only defers reaping
1340          * descriptors, never transmitting frames.  Aside from
1341          * reducing interrupts this also permits more concurrency.
1342          * The only potential downside is if the tx queue backs
1343          * up in which case the top half of the kernel may backup
1344          * due to a lack of tx descriptors.
1345          */
1346         qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
1347                                 AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
1348         qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
1349         if (qnum < 0) {
1350                 /*
1351                  * NB: don't print a message, this happens
1352                  * normally on parts with too few tx queues
1353                  */
1354                 return ERR_PTR(qnum);
1355         }
1356         if (qnum >= ARRAY_SIZE(sc->txqs)) {
1357                 ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
1358                         qnum, ARRAY_SIZE(sc->txqs));
1359                 ath5k_hw_release_tx_queue(ah, qnum);
1360                 return ERR_PTR(-EINVAL);
1361         }
1362         txq = &sc->txqs[qnum];
1363         if (!txq->setup) {
1364                 txq->qnum = qnum;
1365                 txq->link = NULL;
1366                 INIT_LIST_HEAD(&txq->q);
1367                 spin_lock_init(&txq->lock);
1368                 txq->setup = true;
1369         }
1370         return &sc->txqs[qnum];
1371 }
1372
1373 static int
1374 ath5k_beaconq_setup(struct ath5k_hw *ah)
1375 {
1376         struct ath5k_txq_info qi = {
1377                 .tqi_aifs = AR5K_TXQ_USEDEFAULT,
1378                 .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
1379                 .tqi_cw_max = AR5K_TXQ_USEDEFAULT,
1380                 /* NB: for dynamic turbo, don't enable any other interrupts */
1381                 .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
1382         };
1383
1384         return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
1385 }
1386
1387 static int
1388 ath5k_beaconq_config(struct ath5k_softc *sc)
1389 {
1390         struct ath5k_hw *ah = sc->ah;
1391         struct ath5k_txq_info qi;
1392         int ret;
1393
1394         ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
1395         if (ret)
1396                 return ret;
1397         if (sc->opmode == NL80211_IFTYPE_AP ||
1398                 sc->opmode == NL80211_IFTYPE_MESH_POINT) {
1399                 /*
1400                  * Always burst out beacon and CAB traffic
1401                  * (aifs = cwmin = cwmax = 0)
1402                  */
1403                 qi.tqi_aifs = 0;
1404                 qi.tqi_cw_min = 0;
1405                 qi.tqi_cw_max = 0;
1406         } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
1407                 /*
1408                  * Adhoc mode; backoff between 0 and (2 * cw_min).
1409                  */
1410                 qi.tqi_aifs = 0;
1411                 qi.tqi_cw_min = 0;
1412                 qi.tqi_cw_max = 2 * ah->ah_cw_min;
1413         }
1414
1415         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
1416                 "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
1417                 qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
1418
1419         ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
1420         if (ret) {
1421                 ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
1422                         "hardware queue!\n", __func__);
1423                 return ret;
1424         }
1425
1426         return ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */;
1427 }
1428
1429 static void
1430 ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
1431 {
1432         struct ath5k_buf *bf, *bf0;
1433
1434         /*
1435          * NB: this assumes output has been stopped and
1436          *     we do not need to block ath5k_tx_tasklet
1437          */
1438         spin_lock_bh(&txq->lock);
1439         list_for_each_entry_safe(bf, bf0, &txq->q, list) {
1440                 ath5k_debug_printtxbuf(sc, bf);
1441
1442                 ath5k_txbuf_free(sc, bf);
1443
1444                 spin_lock_bh(&sc->txbuflock);
1445                 sc->tx_stats[txq->qnum].len--;
1446                 list_move_tail(&bf->list, &sc->txbuf);
1447                 sc->txbuf_len++;
1448                 spin_unlock_bh(&sc->txbuflock);
1449         }
1450         txq->link = NULL;
1451         spin_unlock_bh(&txq->lock);
1452 }
1453
1454 /*
1455  * Drain the transmit queues and reclaim resources.
1456  */
1457 static void
1458 ath5k_txq_cleanup(struct ath5k_softc *sc)
1459 {
1460         struct ath5k_hw *ah = sc->ah;
1461         unsigned int i;
1462
1463         /* XXX return value */
1464         if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
1465                 /* don't touch the hardware if marked invalid */
1466                 ath5k_hw_stop_tx_dma(ah, sc->bhalq);
1467                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
1468                         ath5k_hw_get_txdp(ah, sc->bhalq));
1469                 for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
1470                         if (sc->txqs[i].setup) {
1471                                 ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
1472                                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
1473                                         "link %p\n",
1474                                         sc->txqs[i].qnum,
1475                                         ath5k_hw_get_txdp(ah,
1476                                                         sc->txqs[i].qnum),
1477                                         sc->txqs[i].link);
1478                         }
1479         }
1480         ieee80211_wake_queues(sc->hw); /* XXX move to callers */
1481
1482         for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
1483                 if (sc->txqs[i].setup)
1484                         ath5k_txq_drainq(sc, &sc->txqs[i]);
1485 }
1486
1487 static void
1488 ath5k_txq_release(struct ath5k_softc *sc)
1489 {
1490         struct ath5k_txq *txq = sc->txqs;
1491         unsigned int i;
1492
1493         for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
1494                 if (txq->setup) {
1495                         ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
1496                         txq->setup = false;
1497                 }
1498 }
1499
1500
1501
1502
1503 /*************\
1504 * RX Handling *
1505 \*************/
1506
1507 /*
1508  * Enable the receive h/w following a reset.
1509  */
1510 static int
1511 ath5k_rx_start(struct ath5k_softc *sc)
1512 {
1513         struct ath5k_hw *ah = sc->ah;
1514         struct ath5k_buf *bf;
1515         int ret;
1516
1517         sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->cachelsz);
1518
1519         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
1520                 sc->cachelsz, sc->rxbufsize);
1521
1522         sc->rxlink = NULL;
1523
1524         spin_lock_bh(&sc->rxbuflock);
1525         list_for_each_entry(bf, &sc->rxbuf, list) {
1526                 ret = ath5k_rxbuf_setup(sc, bf);
1527                 if (ret != 0) {
1528                         spin_unlock_bh(&sc->rxbuflock);
1529                         goto err;
1530                 }
1531         }
1532         bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
1533         spin_unlock_bh(&sc->rxbuflock);
1534
1535         ath5k_hw_set_rxdp(ah, bf->daddr);
1536         ath5k_hw_start_rx_dma(ah);      /* enable recv descriptors */
1537         ath5k_mode_setup(sc);           /* set filters, etc. */
1538         ath5k_hw_start_rx_pcu(ah);      /* re-enable PCU/DMA engine */
1539
1540         return 0;
1541 err:
1542         return ret;
1543 }
1544
1545 /*
1546  * Disable the receive h/w in preparation for a reset.
1547  */
1548 static void
1549 ath5k_rx_stop(struct ath5k_softc *sc)
1550 {
1551         struct ath5k_hw *ah = sc->ah;
1552
1553         ath5k_hw_stop_rx_pcu(ah);       /* disable PCU */
1554         ath5k_hw_set_rx_filter(ah, 0);  /* clear recv filter */
1555         ath5k_hw_stop_rx_dma(ah);       /* disable DMA engine */
1556
1557         ath5k_debug_printrxbuffs(sc, ah);
1558
1559         sc->rxlink = NULL;              /* just in case */
1560 }
1561
1562 static unsigned int
1563 ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
1564                 struct sk_buff *skb, struct ath5k_rx_status *rs)
1565 {
1566         struct ieee80211_hdr *hdr = (void *)skb->data;
1567         unsigned int keyix, hlen;
1568
1569         if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
1570                         rs->rs_keyix != AR5K_RXKEYIX_INVALID)
1571                 return RX_FLAG_DECRYPTED;
1572
1573         /* Apparently when a default key is used to decrypt the packet
1574            the hw does not set the index used to decrypt.  In such cases
1575            get the index from the packet. */
1576         hlen = ieee80211_hdrlen(hdr->frame_control);
1577         if (ieee80211_has_protected(hdr->frame_control) &&
1578             !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
1579             skb->len >= hlen + 4) {
1580                 keyix = skb->data[hlen + 3] >> 6;
1581
1582                 if (test_bit(keyix, sc->keymap))
1583                         return RX_FLAG_DECRYPTED;
1584         }
1585
1586         return 0;
1587 }
1588
1589
1590 static void
1591 ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
1592                      struct ieee80211_rx_status *rxs)
1593 {
1594         u64 tsf, bc_tstamp;
1595         u32 hw_tu;
1596         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
1597
1598         if (ieee80211_is_beacon(mgmt->frame_control) &&
1599             le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
1600             memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) {
1601                 /*
1602                  * Received an IBSS beacon with the same BSSID. Hardware *must*
1603                  * have updated the local TSF. We have to work around various
1604                  * hardware bugs, though...
1605                  */
1606                 tsf = ath5k_hw_get_tsf64(sc->ah);
1607                 bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
1608                 hw_tu = TSF_TO_TU(tsf);
1609
1610                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
1611                         "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
1612                         (unsigned long long)bc_tstamp,
1613                         (unsigned long long)rxs->mactime,
1614                         (unsigned long long)(rxs->mactime - bc_tstamp),
1615                         (unsigned long long)tsf);
1616
1617                 /*
1618                  * Sometimes the HW will give us a wrong tstamp in the rx
1619                  * status, causing the timestamp extension to go wrong.
1620                  * (This seems to happen especially with beacon frames bigger
1621                  * than 78 byte (incl. FCS))
1622                  * But we know that the receive timestamp must be later than the
1623                  * timestamp of the beacon since HW must have synced to that.
1624                  *
1625                  * NOTE: here we assume mactime to be after the frame was
1626                  * received, not like mac80211 which defines it at the start.
1627                  */
1628                 if (bc_tstamp > rxs->mactime) {
1629                         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
1630                                 "fixing mactime from %llx to %llx\n",
1631                                 (unsigned long long)rxs->mactime,
1632                                 (unsigned long long)tsf);
1633                         rxs->mactime = tsf;
1634                 }
1635
1636                 /*
1637                  * Local TSF might have moved higher than our beacon timers,
1638                  * in that case we have to update them to continue sending
1639                  * beacons. This also takes care of synchronizing beacon sending
1640                  * times with other stations.
1641                  */
1642                 if (hw_tu >= sc->nexttbtt)
1643                         ath5k_beacon_update_timers(sc, bc_tstamp);
1644         }
1645 }
1646
1647
1648 static void
1649 ath5k_tasklet_rx(unsigned long data)
1650 {
1651         struct ieee80211_rx_status rxs = {};
1652         struct ath5k_rx_status rs = {};
1653         struct sk_buff *skb;
1654         struct ath5k_softc *sc = (void *)data;
1655         struct ath5k_buf *bf, *bf_last;
1656         struct ath5k_desc *ds;
1657         int ret;
1658         int hdrlen;
1659         int pad;
1660
1661         spin_lock(&sc->rxbuflock);
1662         if (list_empty(&sc->rxbuf)) {
1663                 ATH5K_WARN(sc, "empty rx buf pool\n");
1664                 goto unlock;
1665         }
1666         bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
1667         do {
1668                 rxs.flag = 0;
1669
1670                 bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
1671                 BUG_ON(bf->skb == NULL);
1672                 skb = bf->skb;
1673                 ds = bf->desc;
1674
1675                 /*
1676                  * last buffer must not be freed to ensure proper hardware
1677                  * function. When the hardware finishes also a packet next to
1678                  * it, we are sure, it doesn't use it anymore and we can go on.
1679                  */
1680                 if (bf_last == bf)
1681                         bf->flags |= 1;
1682                 if (bf->flags) {
1683                         struct ath5k_buf *bf_next = list_entry(bf->list.next,
1684                                         struct ath5k_buf, list);
1685                         ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
1686                                         &rs);
1687                         if (ret)
1688                                 break;
1689                         bf->flags &= ~1;
1690                         /* skip the overwritten one (even status is martian) */
1691                         goto next;
1692                 }
1693
1694                 ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
1695                 if (unlikely(ret == -EINPROGRESS))
1696                         break;
1697                 else if (unlikely(ret)) {
1698                         ATH5K_ERR(sc, "error in processing rx descriptor\n");
1699                         spin_unlock(&sc->rxbuflock);
1700                         return;
1701                 }
1702
1703                 if (unlikely(rs.rs_more)) {
1704                         ATH5K_WARN(sc, "unsupported jumbo\n");
1705                         goto next;
1706                 }
1707
1708                 if (unlikely(rs.rs_status)) {
1709                         if (rs.rs_status & AR5K_RXERR_PHY)
1710                                 goto next;
1711                         if (rs.rs_status & AR5K_RXERR_DECRYPT) {
1712                                 /*
1713                                  * Decrypt error.  If the error occurred
1714                                  * because there was no hardware key, then
1715                                  * let the frame through so the upper layers
1716                                  * can process it.  This is necessary for 5210
1717                                  * parts which have no way to setup a ``clear''
1718                                  * key cache entry.
1719                                  *
1720                                  * XXX do key cache faulting
1721                                  */
1722                                 if (rs.rs_keyix == AR5K_RXKEYIX_INVALID &&
1723                                     !(rs.rs_status & AR5K_RXERR_CRC))
1724                                         goto accept;
1725                         }
1726                         if (rs.rs_status & AR5K_RXERR_MIC) {
1727                                 rxs.flag |= RX_FLAG_MMIC_ERROR;
1728                                 goto accept;
1729                         }
1730
1731                         /* let crypto-error packets fall through in MNTR */
1732                         if ((rs.rs_status &
1733                                 ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
1734                                         sc->opmode != NL80211_IFTYPE_MONITOR)
1735                                 goto next;
1736                 }
1737 accept:
1738                 pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
1739                                 PCI_DMA_FROMDEVICE);
1740                 bf->skb = NULL;
1741
1742                 skb_put(skb, rs.rs_datalen);
1743
1744                 /*
1745                  * the hardware adds a padding to 4 byte boundaries between
1746                  * the header and the payload data if the header length is
1747                  * not multiples of 4 - remove it
1748                  */
1749                 hdrlen = ieee80211_get_hdrlen_from_skb(skb);
1750                 if (hdrlen & 3) {
1751                         pad = hdrlen % 4;
1752                         memmove(skb->data + pad, skb->data, hdrlen);
1753                         skb_pull(skb, pad);
1754                 }
1755
1756                 /*
1757                  * always extend the mac timestamp, since this information is
1758                  * also needed for proper IBSS merging.
1759                  *
1760                  * XXX: it might be too late to do it here, since rs_tstamp is
1761                  * 15bit only. that means TSF extension has to be done within
1762                  * 32768usec (about 32ms). it might be necessary to move this to
1763                  * the interrupt handler, like it is done in madwifi.
1764                  *
1765                  * Unfortunately we don't know when the hardware takes the rx
1766                  * timestamp (beginning of phy frame, data frame, end of rx?).
1767                  * The only thing we know is that it is hardware specific...
1768                  * On AR5213 it seems the rx timestamp is at the end of the
1769                  * frame, but i'm not sure.
1770                  *
1771                  * NOTE: mac80211 defines mactime at the beginning of the first
1772                  * data symbol. Since we don't have any time references it's
1773                  * impossible to comply to that. This affects IBSS merge only
1774                  * right now, so it's not too bad...
1775                  */
1776                 rxs.mactime = ath5k_extend_tsf(sc->ah, rs.rs_tstamp);
1777                 rxs.flag |= RX_FLAG_TSFT;
1778
1779                 rxs.freq = sc->curchan->center_freq;
1780                 rxs.band = sc->curband->band;
1781
1782                 rxs.noise = sc->ah->ah_noise_floor;
1783                 rxs.signal = rxs.noise + rs.rs_rssi;
1784
1785                 /* An rssi of 35 indicates you should be able use
1786                  * 54 Mbps reliably. A more elaborate scheme can be used
1787                  * here but it requires a map of SNR/throughput for each
1788                  * possible mode used */
1789                 rxs.qual = rs.rs_rssi * 100 / 35;
1790
1791                 /* rssi can be more than 35 though, anything above that
1792                  * should be considered at 100% */
1793                 if (rxs.qual > 100)
1794                         rxs.qual = 100;
1795
1796                 rxs.antenna = rs.rs_antenna;
1797                 rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
1798                 rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
1799
1800                 if (rxs.rate_idx >= 0 && rs.rs_rate ==
1801                     sc->curband->bitrates[rxs.rate_idx].hw_value_short)
1802                         rxs.flag |= RX_FLAG_SHORTPRE;
1803
1804                 ath5k_debug_dump_skb(sc, skb, "RX  ", 0);
1805
1806                 /* check beacons in IBSS mode */
1807                 if (sc->opmode == NL80211_IFTYPE_ADHOC)
1808                         ath5k_check_ibss_tsf(sc, skb, &rxs);
1809
1810                 __ieee80211_rx(sc->hw, skb, &rxs);
1811 next:
1812                 list_move_tail(&bf->list, &sc->rxbuf);
1813         } while (ath5k_rxbuf_setup(sc, bf) == 0);
1814 unlock:
1815         spin_unlock(&sc->rxbuflock);
1816 }
1817
1818
1819
1820
1821 /*************\
1822 * TX Handling *
1823 \*************/
1824
1825 static void
1826 ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
1827 {
1828         struct ath5k_tx_status ts = {};
1829         struct ath5k_buf *bf, *bf0;
1830         struct ath5k_desc *ds;
1831         struct sk_buff *skb;
1832         struct ieee80211_tx_info *info;
1833         int i, ret;
1834
1835         spin_lock(&txq->lock);
1836         list_for_each_entry_safe(bf, bf0, &txq->q, list) {
1837                 ds = bf->desc;
1838
1839                 ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
1840                 if (unlikely(ret == -EINPROGRESS))
1841                         break;
1842                 else if (unlikely(ret)) {
1843                         ATH5K_ERR(sc, "error %d while processing queue %u\n",
1844                                 ret, txq->qnum);
1845                         break;
1846                 }
1847
1848                 skb = bf->skb;
1849                 info = IEEE80211_SKB_CB(skb);
1850                 bf->skb = NULL;
1851
1852                 pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
1853                                 PCI_DMA_TODEVICE);
1854
1855                 ieee80211_tx_info_clear_status(info);
1856                 for (i = 0; i < 4; i++) {
1857                         struct ieee80211_tx_rate *r =
1858                                 &info->status.rates[i];
1859
1860                         if (ts.ts_rate[i]) {
1861                                 r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
1862                                 r->count = ts.ts_retry[i];
1863                         } else {
1864                                 r->idx = -1;
1865                                 r->count = 0;
1866                         }
1867                 }
1868
1869                 /* count the successful attempt as well */
1870                 info->status.rates[ts.ts_final_idx].count++;
1871
1872                 if (unlikely(ts.ts_status)) {
1873                         sc->ll_stats.dot11ACKFailureCount++;
1874                         if (ts.ts_status & AR5K_TXERR_FILT)
1875                                 info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
1876                 } else {
1877                         info->flags |= IEEE80211_TX_STAT_ACK;
1878                         info->status.ack_signal = ts.ts_rssi;
1879                 }
1880
1881                 ieee80211_tx_status(sc->hw, skb);
1882                 sc->tx_stats[txq->qnum].count++;
1883
1884                 spin_lock(&sc->txbuflock);
1885                 sc->tx_stats[txq->qnum].len--;
1886                 list_move_tail(&bf->list, &sc->txbuf);
1887                 sc->txbuf_len++;
1888                 spin_unlock(&sc->txbuflock);
1889         }
1890         if (likely(list_empty(&txq->q)))
1891                 txq->link = NULL;
1892         spin_unlock(&txq->lock);
1893         if (sc->txbuf_len > ATH_TXBUF / 5)
1894                 ieee80211_wake_queues(sc->hw);
1895 }
1896
1897 static void
1898 ath5k_tasklet_tx(unsigned long data)
1899 {
1900         struct ath5k_softc *sc = (void *)data;
1901
1902         ath5k_tx_processq(sc, sc->txq);
1903 }
1904
1905
1906 /*****************\
1907 * Beacon handling *
1908 \*****************/
1909
1910 /*
1911  * Setup the beacon frame for transmit.
1912  */
1913 static int
1914 ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
1915 {
1916         struct sk_buff *skb = bf->skb;
1917         struct  ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1918         struct ath5k_hw *ah = sc->ah;
1919         struct ath5k_desc *ds;
1920         int ret, antenna = 0;
1921         u32 flags;
1922
1923         bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
1924                         PCI_DMA_TODEVICE);
1925         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
1926                         "skbaddr %llx\n", skb, skb->data, skb->len,
1927                         (unsigned long long)bf->skbaddr);
1928         if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
1929                 ATH5K_ERR(sc, "beacon DMA mapping failed\n");
1930                 return -EIO;
1931         }
1932
1933         ds = bf->desc;
1934
1935         flags = AR5K_TXDESC_NOACK;
1936         if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
1937                 ds->ds_link = bf->daddr;        /* self-linked */
1938                 flags |= AR5K_TXDESC_VEOL;
1939                 /*
1940                  * Let hardware handle antenna switching if txantenna is not set
1941                  */
1942         } else {
1943                 ds->ds_link = 0;
1944                 /*
1945                  * Switch antenna every 4 beacons if txantenna is not set
1946                  * XXX assumes two antennas
1947                  */
1948                 if (antenna == 0)
1949                         antenna = sc->bsent & 4 ? 2 : 1;
1950         }
1951
1952         ds->ds_data = bf->skbaddr;
1953         ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
1954                         ieee80211_get_hdrlen_from_skb(skb),
1955                         AR5K_PKT_TYPE_BEACON, (sc->power_level * 2),
1956                         ieee80211_get_tx_rate(sc->hw, info)->hw_value,
1957                         1, AR5K_TXKEYIX_INVALID,
1958                         antenna, flags, 0, 0);
1959         if (ret)
1960                 goto err_unmap;
1961
1962         return 0;
1963 err_unmap:
1964         pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
1965         return ret;
1966 }
1967
1968 /*
1969  * Transmit a beacon frame at SWBA.  Dynamic updates to the
1970  * frame contents are done as needed and the slot time is
1971  * also adjusted based on current state.
1972  *
1973  * this is usually called from interrupt context (ath5k_intr())
1974  * but also from ath5k_beacon_config() in IBSS mode which in turn
1975  * can be called from a tasklet and user context
1976  */
1977 static void
1978 ath5k_beacon_send(struct ath5k_softc *sc)
1979 {
1980         struct ath5k_buf *bf = sc->bbuf;
1981         struct ath5k_hw *ah = sc->ah;
1982
1983         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
1984
1985         if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
1986                         sc->opmode == NL80211_IFTYPE_MONITOR)) {
1987                 ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
1988                 return;
1989         }
1990         /*
1991          * Check if the previous beacon has gone out.  If
1992          * not don't don't try to post another, skip this
1993          * period and wait for the next.  Missed beacons
1994          * indicate a problem and should not occur.  If we
1995          * miss too many consecutive beacons reset the device.
1996          */
1997         if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
1998                 sc->bmisscount++;
1999                 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2000                         "missed %u consecutive beacons\n", sc->bmisscount);
2001                 if (sc->bmisscount > 3) {               /* NB: 3 is a guess */
2002                         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2003                                 "stuck beacon time (%u missed)\n",
2004                                 sc->bmisscount);
2005                         tasklet_schedule(&sc->restq);
2006                 }
2007                 return;
2008         }
2009         if (unlikely(sc->bmisscount != 0)) {
2010                 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2011                         "resume beacon xmit after %u misses\n",
2012                         sc->bmisscount);
2013                 sc->bmisscount = 0;
2014         }
2015
2016         /*
2017          * Stop any current dma and put the new frame on the queue.
2018          * This should never fail since we check above that no frames
2019          * are still pending on the queue.
2020          */
2021         if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
2022                 ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
2023                 /* NB: hw still stops DMA, so proceed */
2024         }
2025
2026         ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
2027         ath5k_hw_start_tx_dma(ah, sc->bhalq);
2028         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
2029                 sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
2030
2031         sc->bsent++;
2032 }
2033
2034
2035 /**
2036  * ath5k_beacon_update_timers - update beacon timers
2037  *
2038  * @sc: struct ath5k_softc pointer we are operating on
2039  * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
2040  *          beacon timer update based on the current HW TSF.
2041  *
2042  * Calculate the next target beacon transmit time (TBTT) based on the timestamp
2043  * of a received beacon or the current local hardware TSF and write it to the
2044  * beacon timer registers.
2045  *
2046  * This is called in a variety of situations, e.g. when a beacon is received,
2047  * when a TSF update has been detected, but also when an new IBSS is created or
2048  * when we otherwise know we have to update the timers, but we keep it in this
2049  * function to have it all together in one place.
2050  */
2051 static void
2052 ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
2053 {
2054         struct ath5k_hw *ah = sc->ah;
2055         u32 nexttbtt, intval, hw_tu, bc_tu;
2056         u64 hw_tsf;
2057
2058         intval = sc->bintval & AR5K_BEACON_PERIOD;
2059         if (WARN_ON(!intval))
2060                 return;
2061
2062         /* beacon TSF converted to TU */
2063         bc_tu = TSF_TO_TU(bc_tsf);
2064
2065         /* current TSF converted to TU */
2066         hw_tsf = ath5k_hw_get_tsf64(ah);
2067         hw_tu = TSF_TO_TU(hw_tsf);
2068
2069 #define FUDGE 3
2070         /* we use FUDGE to make sure the next TBTT is ahead of the current TU */
2071         if (bc_tsf == -1) {
2072                 /*
2073                  * no beacons received, called internally.
2074                  * just need to refresh timers based on HW TSF.
2075                  */
2076                 nexttbtt = roundup(hw_tu + FUDGE, intval);
2077         } else if (bc_tsf == 0) {
2078                 /*
2079                  * no beacon received, probably called by ath5k_reset_tsf().
2080                  * reset TSF to start with 0.
2081                  */
2082                 nexttbtt = intval;
2083                 intval |= AR5K_BEACON_RESET_TSF;
2084         } else if (bc_tsf > hw_tsf) {
2085                 /*
2086                  * beacon received, SW merge happend but HW TSF not yet updated.
2087                  * not possible to reconfigure timers yet, but next time we
2088                  * receive a beacon with the same BSSID, the hardware will
2089                  * automatically update the TSF and then we need to reconfigure
2090                  * the timers.
2091                  */
2092                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2093                         "need to wait for HW TSF sync\n");
2094                 return;
2095         } else {
2096                 /*
2097                  * most important case for beacon synchronization between STA.
2098                  *
2099                  * beacon received and HW TSF has been already updated by HW.
2100                  * update next TBTT based on the TSF of the beacon, but make
2101                  * sure it is ahead of our local TSF timer.
2102                  */
2103                 nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
2104         }
2105 #undef FUDGE
2106
2107         sc->nexttbtt = nexttbtt;
2108
2109         intval |= AR5K_BEACON_ENA;
2110         ath5k_hw_init_beacon(ah, nexttbtt, intval);
2111
2112         /*
2113          * debugging output last in order to preserve the time critical aspect
2114          * of this function
2115          */
2116         if (bc_tsf == -1)
2117                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2118                         "reconfigured timers based on HW TSF\n");
2119         else if (bc_tsf == 0)
2120                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2121                         "reset HW TSF and timers\n");
2122         else
2123                 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2124                         "updated timers based on beacon TSF\n");
2125
2126         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2127                           "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
2128                           (unsigned long long) bc_tsf,
2129                           (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
2130         ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
2131                 intval & AR5K_BEACON_PERIOD,
2132                 intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
2133                 intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
2134 }
2135
2136
2137 /**
2138  * ath5k_beacon_config - Configure the beacon queues and interrupts
2139  *
2140  * @sc: struct ath5k_softc pointer we are operating on
2141  *
2142  * When operating in station mode we want to receive a BMISS interrupt when we
2143  * stop seeing beacons from the AP we've associated with so we can look for
2144  * another AP to associate with.
2145  *
2146  * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
2147  * interrupts to detect TSF updates only.
2148  */
2149 static void
2150 ath5k_beacon_config(struct ath5k_softc *sc)
2151 {
2152         struct ath5k_hw *ah = sc->ah;
2153
2154         ath5k_hw_set_imr(ah, 0);
2155         sc->bmisscount = 0;
2156         sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
2157
2158         if (sc->opmode == NL80211_IFTYPE_STATION) {
2159                 sc->imask |= AR5K_INT_BMISS;
2160         } else if (sc->opmode == NL80211_IFTYPE_ADHOC ||
2161                         sc->opmode == NL80211_IFTYPE_MESH_POINT ||
2162                         sc->opmode == NL80211_IFTYPE_AP) {
2163                 /*
2164                  * In IBSS mode we use a self-linked tx descriptor and let the
2165                  * hardware send the beacons automatically. We have to load it
2166                  * only once here.
2167                  * We use the SWBA interrupt only to keep track of the beacon
2168                  * timers in order to detect automatic TSF updates.
2169                  */
2170                 ath5k_beaconq_config(sc);
2171
2172                 sc->imask |= AR5K_INT_SWBA;
2173
2174                 if (sc->opmode == NL80211_IFTYPE_ADHOC) {
2175                         if (ath5k_hw_hasveol(ah)) {
2176                                 spin_lock(&sc->block);
2177                                 ath5k_beacon_send(sc);
2178                                 spin_unlock(&sc->block);
2179                         }
2180                 } else
2181                         ath5k_beacon_update_timers(sc, -1);
2182         }
2183
2184         ath5k_hw_set_imr(ah, sc->imask);
2185 }
2186
2187
2188 /********************\
2189 * Interrupt handling *
2190 \********************/
2191
2192 static int
2193 ath5k_init(struct ath5k_softc *sc, bool is_resume)
2194 {
2195         struct ath5k_hw *ah = sc->ah;
2196         int ret, i;
2197
2198         mutex_lock(&sc->lock);
2199
2200         if (is_resume && !test_bit(ATH_STAT_STARTED, sc->status))
2201                 goto out_ok;
2202
2203         __clear_bit(ATH_STAT_STARTED, sc->status);
2204
2205         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
2206
2207         /*
2208          * Stop anything previously setup.  This is safe
2209          * no matter this is the first time through or not.
2210          */
2211         ath5k_stop_locked(sc);
2212
2213         /*
2214          * The basic interface to setting the hardware in a good
2215          * state is ``reset''.  On return the hardware is known to
2216          * be powered up and with interrupts disabled.  This must
2217          * be followed by initialization of the appropriate bits
2218          * and then setup of the interrupt mask.
2219          */
2220         sc->curchan = sc->hw->conf.channel;
2221         sc->curband = &sc->sbands[sc->curchan->band];
2222         sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
2223                 AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
2224                 AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
2225         ret = ath5k_reset(sc, false, false);
2226         if (ret)
2227                 goto done;
2228
2229         /*
2230          * Reset the key cache since some parts do not reset the
2231          * contents on initial power up or resume from suspend.
2232          */
2233         for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
2234                 ath5k_hw_reset_key(ah, i);
2235
2236         __set_bit(ATH_STAT_STARTED, sc->status);
2237
2238         /* Set ack to be sent at low bit-rates */
2239         ath5k_hw_set_ack_bitrate_high(ah, false);
2240
2241         mod_timer(&sc->calib_tim, round_jiffies(jiffies +
2242                         msecs_to_jiffies(ath5k_calinterval * 1000)));
2243
2244 out_ok:
2245         ret = 0;
2246 done:
2247         mmiowb();
2248         mutex_unlock(&sc->lock);
2249         return ret;
2250 }
2251
2252 static int
2253 ath5k_stop_locked(struct ath5k_softc *sc)
2254 {
2255         struct ath5k_hw *ah = sc->ah;
2256
2257         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
2258                         test_bit(ATH_STAT_INVALID, sc->status));
2259
2260         /*
2261          * Shutdown the hardware and driver:
2262          *    stop output from above
2263          *    disable interrupts
2264          *    turn off timers
2265          *    turn off the radio
2266          *    clear transmit machinery
2267          *    clear receive machinery
2268          *    drain and release tx queues
2269          *    reclaim beacon resources
2270          *    power down hardware
2271          *
2272          * Note that some of this work is not possible if the
2273          * hardware is gone (invalid).
2274          */
2275         ieee80211_stop_queues(sc->hw);
2276
2277         if (!test_bit(ATH_STAT_INVALID, sc->status)) {
2278                 ath5k_led_off(sc);
2279                 ath5k_hw_set_imr(ah, 0);
2280                 synchronize_irq(sc->pdev->irq);
2281         }
2282         ath5k_txq_cleanup(sc);
2283         if (!test_bit(ATH_STAT_INVALID, sc->status)) {
2284                 ath5k_rx_stop(sc);
2285                 ath5k_hw_phy_disable(ah);
2286         } else
2287                 sc->rxlink = NULL;
2288
2289         return 0;
2290 }
2291
2292 /*
2293  * Stop the device, grabbing the top-level lock to protect
2294  * against concurrent entry through ath5k_init (which can happen
2295  * if another thread does a system call and the thread doing the
2296  * stop is preempted).
2297  */
2298 static int
2299 ath5k_stop_hw(struct ath5k_softc *sc, bool is_suspend)
2300 {
2301         int ret;
2302
2303         mutex_lock(&sc->lock);
2304         ret = ath5k_stop_locked(sc);
2305         if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
2306                 /*
2307                  * Set the chip in full sleep mode.  Note that we are
2308                  * careful to do this only when bringing the interface
2309                  * completely to a stop.  When the chip is in this state
2310                  * it must be carefully woken up or references to
2311                  * registers in the PCI clock domain may freeze the bus
2312                  * (and system).  This varies by chip and is mostly an
2313                  * issue with newer parts that go to sleep more quickly.
2314                  */
2315                 if (sc->ah->ah_mac_srev >= 0x78) {
2316                         /*
2317                          * XXX
2318                          * don't put newer MAC revisions > 7.8 to sleep because
2319                          * of the above mentioned problems
2320                          */
2321                         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, "
2322                                 "not putting device to sleep\n");
2323                 } else {
2324                         ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2325                                 "putting device to full sleep\n");
2326                         ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0);
2327                 }
2328         }
2329         ath5k_txbuf_free(sc, sc->bbuf);
2330         if (!is_suspend)
2331                 __clear_bit(ATH_STAT_STARTED, sc->status);
2332
2333         mmiowb();
2334         mutex_unlock(&sc->lock);
2335
2336         del_timer_sync(&sc->calib_tim);
2337         tasklet_kill(&sc->rxtq);
2338         tasklet_kill(&sc->txtq);
2339         tasklet_kill(&sc->restq);
2340
2341         return ret;
2342 }
2343
2344 static irqreturn_t
2345 ath5k_intr(int irq, void *dev_id)
2346 {
2347         struct ath5k_softc *sc = dev_id;
2348         struct ath5k_hw *ah = sc->ah;
2349         enum ath5k_int status;
2350         unsigned int counter = 1000;
2351
2352         if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
2353                                 !ath5k_hw_is_intr_pending(ah)))
2354                 return IRQ_NONE;
2355
2356         do {
2357                 /*
2358                  * Figure out the reason(s) for the interrupt.  Note
2359                  * that get_isr returns a pseudo-ISR that may include
2360                  * bits we haven't explicitly enabled so we mask the
2361                  * value to insure we only process bits we requested.
2362                  */
2363                 ath5k_hw_get_isr(ah, &status);          /* NB: clears IRQ too */
2364                 ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
2365                                 status, sc->imask);
2366                 status &= sc->imask; /* discard unasked for bits */
2367                 if (unlikely(status & AR5K_INT_FATAL)) {
2368                         /*
2369                          * Fatal errors are unrecoverable.
2370                          * Typically these are caused by DMA errors.
2371                          */
2372                         tasklet_schedule(&sc->restq);
2373                 } else if (unlikely(status & AR5K_INT_RXORN)) {
2374                         tasklet_schedule(&sc->restq);
2375                 } else {
2376                         if (status & AR5K_INT_SWBA) {
2377                                 /*
2378                                 * Software beacon alert--time to send a beacon.
2379                                 * Handle beacon transmission directly; deferring
2380                                 * this is too slow to meet timing constraints
2381                                 * under load.
2382                                 *
2383                                 * In IBSS mode we use this interrupt just to
2384                                 * keep track of the next TBTT (target beacon
2385                                 * transmission time) in order to detect wether
2386                                 * automatic TSF updates happened.
2387                                 */
2388                                 if (sc->opmode == NL80211_IFTYPE_ADHOC) {
2389                                          /* XXX: only if VEOL suppported */
2390                                         u64 tsf = ath5k_hw_get_tsf64(ah);
2391                                         sc->nexttbtt += sc->bintval;
2392                                         ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2393                                                   "SWBA nexttbtt: %x hw_tu: %x "
2394                                                   "TSF: %llx\n",
2395                                                   sc->nexttbtt,
2396                                                   TSF_TO_TU(tsf),
2397                                                   (unsigned long long) tsf);
2398                                 } else {
2399                                         spin_lock(&sc->block);
2400                                         ath5k_beacon_send(sc);
2401                                         spin_unlock(&sc->block);
2402                                 }
2403                         }
2404                         if (status & AR5K_INT_RXEOL) {
2405                                 /*
2406                                 * NB: the hardware should re-read the link when
2407                                 *     RXE bit is written, but it doesn't work at
2408                                 *     least on older hardware revs.
2409                                 */
2410                                 sc->rxlink = NULL;
2411                         }
2412                         if (status & AR5K_INT_TXURN) {
2413                                 /* bump tx trigger level */
2414                                 ath5k_hw_update_tx_triglevel(ah, true);
2415                         }
2416                         if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
2417                                 tasklet_schedule(&sc->rxtq);
2418                         if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
2419                                         | AR5K_INT_TXERR | AR5K_INT_TXEOL))
2420                                 tasklet_schedule(&sc->txtq);
2421                         if (status & AR5K_INT_BMISS) {
2422                         }
2423                         if (status & AR5K_INT_MIB) {
2424                                 /*
2425                                  * These stats are also used for ANI i think
2426                                  * so how about updating them more often ?
2427                                  */
2428                                 ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
2429                         }
2430                 }
2431         } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
2432
2433         if (unlikely(!counter))
2434                 ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
2435
2436         return IRQ_HANDLED;
2437 }
2438
2439 static void
2440 ath5k_tasklet_reset(unsigned long data)
2441 {
2442         struct ath5k_softc *sc = (void *)data;
2443
2444         ath5k_reset_wake(sc);
2445 }
2446
2447 /*
2448  * Periodically recalibrate the PHY to account
2449  * for temperature/environment changes.
2450  */
2451 static void
2452 ath5k_calibrate(unsigned long data)
2453 {
2454         struct ath5k_softc *sc = (void *)data;
2455         struct ath5k_hw *ah = sc->ah;
2456
2457         ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
2458                 ieee80211_frequency_to_channel(sc->curchan->center_freq),
2459                 sc->curchan->hw_value);
2460
2461         if (ath5k_hw_get_rf_gain(ah) == AR5K_RFGAIN_NEED_CHANGE) {
2462                 /*
2463                  * Rfgain is out of bounds, reset the chip
2464                  * to load new gain values.
2465                  */
2466                 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
2467                 ath5k_reset_wake(sc);
2468         }
2469         if (ath5k_hw_phy_calibrate(ah, sc->curchan))
2470                 ATH5K_ERR(sc, "calibration of channel %u failed\n",
2471                         ieee80211_frequency_to_channel(
2472                                 sc->curchan->center_freq));
2473
2474         mod_timer(&sc->calib_tim, round_jiffies(jiffies +
2475                         msecs_to_jiffies(ath5k_calinterval * 1000)));
2476 }
2477
2478
2479
2480 /***************\
2481 * LED functions *
2482 \***************/
2483
2484 static void
2485 ath5k_led_enable(struct ath5k_softc *sc)
2486 {
2487         if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
2488                 ath5k_hw_set_gpio_output(sc->ah, sc->led_pin);
2489                 ath5k_led_off(sc);
2490         }
2491 }
2492
2493 static void
2494 ath5k_led_on(struct ath5k_softc *sc)
2495 {
2496         if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
2497                 return;
2498         ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on);
2499 }
2500
2501 static void
2502 ath5k_led_off(struct ath5k_softc *sc)
2503 {
2504         if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
2505                 return;
2506         ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
2507 }
2508
2509 static void
2510 ath5k_led_brightness_set(struct led_classdev *led_dev,
2511         enum led_brightness brightness)
2512 {
2513         struct ath5k_led *led = container_of(led_dev, struct ath5k_led,
2514                 led_dev);
2515
2516         if (brightness == LED_OFF)
2517                 ath5k_led_off(led->sc);
2518         else
2519                 ath5k_led_on(led->sc);
2520 }
2521
2522 static int
2523 ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led,
2524                    const char *name, char *trigger)
2525 {
2526         int err;
2527
2528         led->sc = sc;
2529         strncpy(led->name, name, sizeof(led->name));
2530         led->led_dev.name = led->name;
2531         led->led_dev.default_trigger = trigger;
2532         led->led_dev.brightness_set = ath5k_led_brightness_set;
2533
2534         err = led_classdev_register(&sc->pdev->dev, &led->led_dev);
2535         if (err) {
2536                 ATH5K_WARN(sc, "could not register LED %s\n", name);
2537                 led->sc = NULL;
2538         }
2539         return err;
2540 }
2541
2542 static void
2543 ath5k_unregister_led(struct ath5k_led *led)
2544 {
2545         if (!led->sc)
2546                 return;
2547         led_classdev_unregister(&led->led_dev);
2548         ath5k_led_off(led->sc);
2549         led->sc = NULL;
2550 }
2551
2552 static void
2553 ath5k_unregister_leds(struct ath5k_softc *sc)
2554 {
2555         ath5k_unregister_led(&sc->rx_led);
2556         ath5k_unregister_led(&sc->tx_led);
2557 }
2558
2559
2560 static int
2561 ath5k_init_leds(struct ath5k_softc *sc)
2562 {
2563         int ret = 0;
2564         struct ieee80211_hw *hw = sc->hw;
2565         struct pci_dev *pdev = sc->pdev;
2566         char name[ATH5K_LED_MAX_NAME_LEN + 1];
2567
2568         /*
2569          * Auto-enable soft led processing for IBM cards and for
2570          * 5211 minipci cards.
2571          */
2572         if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
2573             pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
2574                 __set_bit(ATH_STAT_LEDSOFT, sc->status);
2575                 sc->led_pin = 0;
2576                 sc->led_on = 0;  /* active low */
2577         }
2578         /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
2579         if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
2580                 __set_bit(ATH_STAT_LEDSOFT, sc->status);
2581                 sc->led_pin = 1;
2582                 sc->led_on = 1;  /* active high */
2583         }
2584         if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
2585                 goto out;
2586
2587         ath5k_led_enable(sc);
2588
2589         snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy));
2590         ret = ath5k_register_led(sc, &sc->rx_led, name,
2591                 ieee80211_get_rx_led_name(hw));
2592         if (ret)
2593                 goto out;
2594
2595         snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy));
2596         ret = ath5k_register_led(sc, &sc->tx_led, name,
2597                 ieee80211_get_tx_led_name(hw));
2598 out:
2599         return ret;
2600 }
2601
2602
2603 /********************\
2604 * Mac80211 functions *
2605 \********************/
2606
2607 static int
2608 ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2609 {
2610         struct ath5k_softc *sc = hw->priv;
2611         struct ath5k_buf *bf;
2612         unsigned long flags;
2613         int hdrlen;
2614         int pad;
2615
2616         ath5k_debug_dump_skb(sc, skb, "TX  ", 1);
2617
2618         if (sc->opmode == NL80211_IFTYPE_MONITOR)
2619                 ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
2620
2621         /*
2622          * the hardware expects the header padded to 4 byte boundaries
2623          * if this is not the case we add the padding after the header
2624          */
2625         hdrlen = ieee80211_get_hdrlen_from_skb(skb);
2626         if (hdrlen & 3) {
2627                 pad = hdrlen % 4;
2628                 if (skb_headroom(skb) < pad) {
2629                         ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
2630                                 " headroom to pad %d\n", hdrlen, pad);
2631                         return -1;
2632                 }
2633                 skb_push(skb, pad);
2634                 memmove(skb->data, skb->data+pad, hdrlen);
2635         }
2636
2637         spin_lock_irqsave(&sc->txbuflock, flags);
2638         if (list_empty(&sc->txbuf)) {
2639                 ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
2640                 spin_unlock_irqrestore(&sc->txbuflock, flags);
2641                 ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
2642                 return -1;
2643         }
2644         bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
2645         list_del(&bf->list);
2646         sc->txbuf_len--;
2647         if (list_empty(&sc->txbuf))
2648                 ieee80211_stop_queues(hw);
2649         spin_unlock_irqrestore(&sc->txbuflock, flags);
2650
2651         bf->skb = skb;
2652
2653         if (ath5k_txbuf_setup(sc, bf)) {
2654                 bf->skb = NULL;
2655                 spin_lock_irqsave(&sc->txbuflock, flags);
2656                 list_add_tail(&bf->list, &sc->txbuf);
2657                 sc->txbuf_len++;
2658                 spin_unlock_irqrestore(&sc->txbuflock, flags);
2659                 dev_kfree_skb_any(skb);
2660                 return 0;
2661         }
2662
2663         return 0;
2664 }
2665
2666 static int
2667 ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
2668 {
2669         struct ath5k_hw *ah = sc->ah;
2670         int ret;
2671
2672         ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
2673
2674         if (stop) {
2675                 ath5k_hw_set_imr(ah, 0);
2676                 ath5k_txq_cleanup(sc);
2677                 ath5k_rx_stop(sc);
2678         }
2679         ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
2680         if (ret) {
2681                 ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
2682                 goto err;
2683         }
2684
2685         /*
2686          * This is needed only to setup initial state
2687          * but it's best done after a reset.
2688          */
2689         ath5k_hw_set_txpower_limit(sc->ah, 0);
2690
2691         ret = ath5k_rx_start(sc);
2692         if (ret) {
2693                 ATH5K_ERR(sc, "can't start recv logic\n");
2694                 goto err;
2695         }
2696
2697         /*
2698          * Change channels and update the h/w rate map if we're switching;
2699          * e.g. 11a to 11b/g.
2700          *
2701          * We may be doing a reset in response to an ioctl that changes the
2702          * channel so update any state that might change as a result.
2703          *
2704          * XXX needed?
2705          */
2706 /*      ath5k_chan_change(sc, c); */
2707
2708         ath5k_beacon_config(sc);
2709         /* intrs are enabled by ath5k_beacon_config */
2710
2711         return 0;
2712 err:
2713         return ret;
2714 }
2715
2716 static int
2717 ath5k_reset_wake(struct ath5k_softc *sc)
2718 {
2719         int ret;
2720
2721         ret = ath5k_reset(sc, true, true);
2722         if (!ret)
2723                 ieee80211_wake_queues(sc->hw);
2724
2725         return ret;
2726 }
2727
2728 static int ath5k_start(struct ieee80211_hw *hw)
2729 {
2730         return ath5k_init(hw->priv, false);
2731 }
2732
2733 static void ath5k_stop(struct ieee80211_hw *hw)
2734 {
2735         ath5k_stop_hw(hw->priv, false);
2736 }
2737
2738 static int ath5k_add_interface(struct ieee80211_hw *hw,
2739                 struct ieee80211_if_init_conf *conf)
2740 {
2741         struct ath5k_softc *sc = hw->priv;
2742         int ret;
2743
2744         mutex_lock(&sc->lock);
2745         if (sc->vif) {
2746                 ret = 0;
2747                 goto end;
2748         }
2749
2750         sc->vif = conf->vif;
2751
2752         switch (conf->type) {
2753         case NL80211_IFTYPE_AP:
2754         case NL80211_IFTYPE_STATION:
2755         case NL80211_IFTYPE_ADHOC:
2756         case NL80211_IFTYPE_MESH_POINT:
2757         case NL80211_IFTYPE_MONITOR:
2758                 sc->opmode = conf->type;
2759                 break;
2760         default:
2761                 ret = -EOPNOTSUPP;
2762                 goto end;
2763         }
2764
2765         /* Set to a reasonable value. Note that this will
2766          * be set to mac80211's value at ath5k_config(). */
2767         sc->bintval = 1000;
2768
2769         ret = 0;
2770 end:
2771         mutex_unlock(&sc->lock);
2772         return ret;
2773 }
2774
2775 static void
2776 ath5k_remove_interface(struct ieee80211_hw *hw,
2777                         struct ieee80211_if_init_conf *conf)
2778 {
2779         struct ath5k_softc *sc = hw->priv;
2780
2781         mutex_lock(&sc->lock);
2782         if (sc->vif != conf->vif)
2783                 goto end;
2784
2785         sc->vif = NULL;
2786 end:
2787         mutex_unlock(&sc->lock);
2788 }
2789
2790 /*
2791  * TODO: Phy disable/diversity etc
2792  */
2793 static int
2794 ath5k_config(struct ieee80211_hw *hw, u32 changed)
2795 {
2796         struct ath5k_softc *sc = hw->priv;
2797         struct ieee80211_conf *conf = &hw->conf;
2798
2799         sc->bintval = conf->beacon_int;
2800         sc->power_level = conf->power_level;
2801
2802         return ath5k_chan_set(sc, conf->channel);
2803 }
2804
2805 static int
2806 ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
2807                         struct ieee80211_if_conf *conf)
2808 {
2809         struct ath5k_softc *sc = hw->priv;
2810         struct ath5k_hw *ah = sc->ah;
2811         int ret;
2812
2813         mutex_lock(&sc->lock);
2814         if (sc->vif != vif) {
2815                 ret = -EIO;
2816                 goto unlock;
2817         }
2818         if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
2819                 /* Cache for later use during resets */
2820                 memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
2821                 /* XXX: assoc id is set to 0 for now, mac80211 doesn't have
2822                  * a clean way of letting us retrieve this yet. */
2823                 ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
2824                 mmiowb();
2825         }
2826         if (conf->changed & IEEE80211_IFCC_BEACON &&
2827                         (vif->type == NL80211_IFTYPE_ADHOC ||
2828                          vif->type == NL80211_IFTYPE_MESH_POINT ||
2829                          vif->type == NL80211_IFTYPE_AP)) {
2830                 struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
2831                 if (!beacon) {
2832                         ret = -ENOMEM;
2833                         goto unlock;
2834                 }
2835                 ath5k_beacon_update(sc, beacon);
2836         }
2837         mutex_unlock(&sc->lock);
2838
2839         return ath5k_reset_wake(sc);
2840 unlock:
2841         mutex_unlock(&sc->lock);
2842         return ret;
2843 }
2844
2845 #define SUPPORTED_FIF_FLAGS \
2846         FIF_PROMISC_IN_BSS |  FIF_ALLMULTI | FIF_FCSFAIL | \
2847         FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
2848         FIF_BCN_PRBRESP_PROMISC
2849 /*
2850  * o always accept unicast, broadcast, and multicast traffic
2851  * o multicast traffic for all BSSIDs will be enabled if mac80211
2852  *   says it should be
2853  * o maintain current state of phy ofdm or phy cck error reception.
2854  *   If the hardware detects any of these type of errors then
2855  *   ath5k_hw_get_rx_filter() will pass to us the respective
2856  *   hardware filters to be able to receive these type of frames.
2857  * o probe request frames are accepted only when operating in
2858  *   hostap, adhoc, or monitor modes
2859  * o enable promiscuous mode according to the interface state
2860  * o accept beacons:
2861  *   - when operating in adhoc mode so the 802.11 layer creates
2862  *     node table entries for peers,
2863  *   - when operating in station mode for collecting rssi data when
2864  *     the station is otherwise quiet, or
2865  *   - when scanning
2866  */
2867 static void ath5k_configure_filter(struct ieee80211_hw *hw,
2868                 unsigned int changed_flags,
2869                 unsigned int *new_flags,
2870                 int mc_count, struct dev_mc_list *mclist)
2871 {
2872         struct ath5k_softc *sc = hw->priv;
2873         struct ath5k_hw *ah = sc->ah;
2874         u32 mfilt[2], val, rfilt;
2875         u8 pos;
2876         int i;
2877
2878         mfilt[0] = 0;
2879         mfilt[1] = 0;
2880
2881         /* Only deal with supported flags */
2882         changed_flags &= SUPPORTED_FIF_FLAGS;
2883         *new_flags &= SUPPORTED_FIF_FLAGS;
2884
2885         /* If HW detects any phy or radar errors, leave those filters on.
2886          * Also, always enable Unicast, Broadcasts and Multicast
2887          * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
2888         rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
2889                 (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
2890                 AR5K_RX_FILTER_MCAST);
2891
2892         if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
2893                 if (*new_flags & FIF_PROMISC_IN_BSS) {
2894                         rfilt |= AR5K_RX_FILTER_PROM;
2895                         __set_bit(ATH_STAT_PROMISC, sc->status);
2896                 } else {
2897                         __clear_bit(ATH_STAT_PROMISC, sc->status);
2898                 }
2899         }
2900
2901         /* Note, AR5K_RX_FILTER_MCAST is already enabled */
2902         if (*new_flags & FIF_ALLMULTI) {
2903                 mfilt[0] =  ~0;
2904                 mfilt[1] =  ~0;
2905         } else {
2906                 for (i = 0; i < mc_count; i++) {
2907                         if (!mclist)
2908                                 break;
2909                         /* calculate XOR of eight 6-bit values */
2910                         val = get_unaligned_le32(mclist->dmi_addr + 0);
2911                         pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
2912                         val = get_unaligned_le32(mclist->dmi_addr + 3);
2913                         pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
2914                         pos &= 0x3f;
2915                         mfilt[pos / 32] |= (1 << (pos % 32));
2916                         /* XXX: we might be able to just do this instead,
2917                         * but not sure, needs testing, if we do use this we'd
2918                         * neet to inform below to not reset the mcast */
2919                         /* ath5k_hw_set_mcast_filterindex(ah,
2920                          *      mclist->dmi_addr[5]); */
2921                         mclist = mclist->next;
2922                 }
2923         }
2924
2925         /* This is the best we can do */
2926         if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
2927                 rfilt |= AR5K_RX_FILTER_PHYERR;
2928
2929         /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
2930         * and probes for any BSSID, this needs testing */
2931         if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
2932                 rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ;
2933
2934         /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
2935          * set we should only pass on control frames for this
2936          * station. This needs testing. I believe right now this
2937          * enables *all* control frames, which is OK.. but
2938          * but we should see if we can improve on granularity */
2939         if (*new_flags & FIF_CONTROL)
2940                 rfilt |= AR5K_RX_FILTER_CONTROL;
2941
2942         /* Additional settings per mode -- this is per ath5k */
2943
2944         /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
2945
2946         if (sc->opmode == NL80211_IFTYPE_MONITOR)
2947                 rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
2948                         AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
2949         if (sc->opmode != NL80211_IFTYPE_STATION)
2950                 rfilt |= AR5K_RX_FILTER_PROBEREQ;
2951         if (sc->opmode != NL80211_IFTYPE_AP &&
2952                 sc->opmode != NL80211_IFTYPE_MESH_POINT &&
2953                 test_bit(ATH_STAT_PROMISC, sc->status))
2954                 rfilt |= AR5K_RX_FILTER_PROM;
2955         if (sc->opmode == NL80211_IFTYPE_STATION ||
2956                 sc->opmode == NL80211_IFTYPE_ADHOC ||
2957                 sc->opmode == NL80211_IFTYPE_AP)
2958                 rfilt |= AR5K_RX_FILTER_BEACON;
2959         if (sc->opmode == NL80211_IFTYPE_MESH_POINT)
2960                 rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
2961                         AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
2962
2963         /* Set filters */
2964         ath5k_hw_set_rx_filter(ah, rfilt);
2965
2966         /* Set multicast bits */
2967         ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
2968         /* Set the cached hw filter flags, this will alter actually
2969          * be set in HW */
2970         sc->filter_flags = rfilt;
2971 }
2972
2973 static int
2974 ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2975                 const u8 *local_addr, const u8 *addr,
2976                 struct ieee80211_key_conf *key)
2977 {
2978         struct ath5k_softc *sc = hw->priv;
2979         int ret = 0;
2980
2981         if (modparam_nohwcrypt)
2982                 return -EOPNOTSUPP;
2983
2984         switch (key->alg) {
2985         case ALG_WEP:
2986         case ALG_TKIP:
2987                 break;
2988         case ALG_CCMP:
2989                 return -EOPNOTSUPP;
2990         default:
2991                 WARN_ON(1);
2992                 return -EINVAL;
2993         }
2994
2995         mutex_lock(&sc->lock);
2996
2997         switch (cmd) {
2998         case SET_KEY:
2999                 ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, addr);
3000                 if (ret) {
3001                         ATH5K_ERR(sc, "can't set the key\n");
3002                         goto unlock;
3003                 }
3004                 __set_bit(key->keyidx, sc->keymap);
3005                 key->hw_key_idx = key->keyidx;
3006                 key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV |
3007                                IEEE80211_KEY_FLAG_GENERATE_MMIC);
3008                 break;
3009         case DISABLE_KEY:
3010                 ath5k_hw_reset_key(sc->ah, key->keyidx);
3011                 __clear_bit(key->keyidx, sc->keymap);
3012                 break;
3013         default:
3014                 ret = -EINVAL;
3015                 goto unlock;
3016         }
3017
3018 unlock:
3019         mmiowb();
3020         mutex_unlock(&sc->lock);
3021         return ret;
3022 }
3023
3024 static int
3025 ath5k_get_stats(struct ieee80211_hw *hw,
3026                 struct ieee80211_low_level_stats *stats)
3027 {
3028         struct ath5k_softc *sc = hw->priv;
3029         struct ath5k_hw *ah = sc->ah;
3030
3031         /* Force update */
3032         ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
3033
3034         memcpy(stats, &sc->ll_stats, sizeof(sc->ll_stats));
3035
3036         return 0;
3037 }
3038
3039 static int
3040 ath5k_get_tx_stats(struct ieee80211_hw *hw,
3041                 struct ieee80211_tx_queue_stats *stats)
3042 {
3043         struct ath5k_softc *sc = hw->priv;
3044
3045         memcpy(stats, &sc->tx_stats, sizeof(sc->tx_stats));
3046
3047         return 0;
3048 }
3049
3050 static u64
3051 ath5k_get_tsf(struct ieee80211_hw *hw)
3052 {
3053         struct ath5k_softc *sc = hw->priv;
3054
3055         return ath5k_hw_get_tsf64(sc->ah);
3056 }
3057
3058 static void
3059 ath5k_reset_tsf(struct ieee80211_hw *hw)
3060 {
3061         struct ath5k_softc *sc = hw->priv;
3062
3063         /*
3064          * in IBSS mode we need to update the beacon timers too.
3065          * this will also reset the TSF if we call it with 0
3066          */
3067         if (sc->opmode == NL80211_IFTYPE_ADHOC)
3068                 ath5k_beacon_update_timers(sc, 0);
3069         else
3070                 ath5k_hw_reset_tsf(sc->ah);
3071 }
3072
3073 static int
3074 ath5k_beacon_update(struct ath5k_softc *sc, struct sk_buff *skb)
3075 {
3076         unsigned long flags;
3077         int ret;
3078
3079         ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
3080
3081         spin_lock_irqsave(&sc->block, flags);
3082         ath5k_txbuf_free(sc, sc->bbuf);
3083         sc->bbuf->skb = skb;
3084         ret = ath5k_beacon_setup(sc, sc->bbuf);
3085         if (ret)
3086                 sc->bbuf->skb = NULL;
3087         spin_unlock_irqrestore(&sc->block, flags);
3088         if (!ret) {
3089                 ath5k_beacon_config(sc);
3090                 mmiowb();
3091         }
3092
3093         return ret;
3094 }
3095