1 /* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c)
3 * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
4 * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
6 * Current maintainers (as of 29 September 2003) are:
7 * Pavel Roskin <proski AT gnu.org>
8 * and David Gibson <hermes AT gibson.dropbear.id.au>
10 * (C) Copyright David Gibson, IBM Corporation 2001-2003.
11 * Copyright (C) 2000 David Gibson, Linuxcare Australia.
12 * With some help from :
13 * Copyright (C) 2001 Jean Tourrilhes, HP Labs
14 * Copyright (C) 2001 Benjamin Herrenschmidt
16 * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
18 * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
19 * AT fasta.fh-dortmund.de>
20 * http://www.stud.fh-dortmund.de/~andy/wvlan/
22 * The contents of this file are subject to the Mozilla Public License
23 * Version 1.1 (the "License"); you may not use this file except in
24 * compliance with the License. You may obtain a copy of the License
25 * at http://www.mozilla.org/MPL/
27 * Software distributed under the License is distributed on an "AS IS"
28 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
29 * the License for the specific language governing rights and
30 * limitations under the License.
32 * The initial developer of the original code is David A. Hinds
33 * <dahinds AT users.sourceforge.net>. Portions created by David
34 * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
37 * Alternatively, the contents of this file may be used under the
38 * terms of the GNU General Public License version 2 (the "GPL"), in
39 * which case the provisions of the GPL are applicable instead of the
40 * above. If you wish to allow the use of your version of this file
41 * only under the terms of the GPL and not to allow others to use your
42 * version of this file under the MPL, indicate your decision by
43 * deleting the provisions above and replace them with the notice and
44 * other provisions required by the GPL. If you do not delete the
45 * provisions above, a recipient may use your version of this file
46 * under either the MPL or the GPL. */
50 * o Handle de-encapsulation within network layer, provide 802.11
51 * headers (patch from Thomas 'Dent' Mirlacher)
52 * o Fix possible races in SPY handling.
53 * o Disconnect wireless extensions from fundamental configuration.
54 * o (maybe) Software WEP support (patch from Stano Meduna).
55 * o (maybe) Use multiple Tx buffers - driver handling queue
56 * rather than firmware.
59 /* Locking and synchronization:
61 * The basic principle is that everything is serialized through a
62 * single spinlock, priv->lock. The lock is used in user, bh and irq
63 * context, so when taken outside hardirq context it should always be
64 * taken with interrupts disabled. The lock protects both the
65 * hardware and the struct orinoco_private.
67 * Another flag, priv->hw_unavailable indicates that the hardware is
68 * unavailable for an extended period of time (e.g. suspended, or in
69 * the middle of a hard reset). This flag is protected by the
70 * spinlock. All code which touches the hardware should check the
71 * flag after taking the lock, and if it is set, give up on whatever
72 * they are doing and drop the lock again. The orinoco_lock()
73 * function handles this (it unlocks and returns -EBUSY if
74 * hw_unavailable is non-zero).
77 #define DRIVER_NAME "orinoco"
79 #include <linux/module.h>
80 #include <linux/kernel.h>
81 #include <linux/init.h>
82 #include <linux/netdevice.h>
83 #include <linux/etherdevice.h>
84 #include <linux/ethtool.h>
85 #include <linux/if_arp.h>
86 #include <linux/wireless.h>
87 #include <net/iw_handler.h>
88 #include <net/ieee80211.h>
90 #include "hermes_rid.h"
93 /********************************************************************/
94 /* Module information */
95 /********************************************************************/
97 MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
98 MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards");
99 MODULE_LICENSE("Dual MPL/GPL");
101 /* Level of debugging. Used in the macros in orinoco.h */
103 int orinoco_debug = ORINOCO_DEBUG;
104 module_param(orinoco_debug, int, 0644);
105 MODULE_PARM_DESC(orinoco_debug, "Debug level");
106 EXPORT_SYMBOL(orinoco_debug);
109 static int suppress_linkstatus; /* = 0 */
110 module_param(suppress_linkstatus, bool, 0644);
111 MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
112 static int ignore_disconnect; /* = 0 */
113 module_param(ignore_disconnect, int, 0644);
114 MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer");
116 static int force_monitor; /* = 0 */
117 module_param(force_monitor, int, 0644);
118 MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions");
120 /********************************************************************/
121 /* Compile time configuration and compatibility stuff */
122 /********************************************************************/
124 /* We do this this way to avoid ifdefs in the actual code */
126 #define SPY_NUMBER(priv) (priv->spy_data.spy_number)
128 #define SPY_NUMBER(priv) 0
129 #endif /* WIRELESS_SPY */
131 /********************************************************************/
132 /* Internal constants */
133 /********************************************************************/
135 /* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
136 static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
137 #define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
139 #define ORINOCO_MIN_MTU 256
140 #define ORINOCO_MAX_MTU (IEEE80211_DATA_LEN - ENCAPS_OVERHEAD)
142 #define SYMBOL_MAX_VER_LEN (14)
145 #define MAX_IRQLOOPS_PER_IRQ 10
146 #define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of
147 * how many events the
149 * legitimately generate */
150 #define SMALL_KEY_SIZE 5
151 #define LARGE_KEY_SIZE 13
152 #define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */
154 #define DUMMY_FID 0xFFFF
156 /*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
157 HERMES_MAX_MULTICAST : 0)*/
158 #define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
160 #define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
161 | HERMES_EV_TX | HERMES_EV_TXEXC \
162 | HERMES_EV_WTERR | HERMES_EV_INFO \
163 | HERMES_EV_INFDROP )
165 #define MAX_RID_LEN 1024
167 static const struct iw_handler_def orinoco_handler_def;
168 static const struct ethtool_ops orinoco_ethtool_ops;
170 /********************************************************************/
172 /********************************************************************/
174 /* The frequency of each channel in MHz */
175 static const long channel_frequency[] = {
176 2412, 2417, 2422, 2427, 2432, 2437, 2442,
177 2447, 2452, 2457, 2462, 2467, 2472, 2484
179 #define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
181 /* This tables gives the actual meanings of the bitrate IDs returned
182 * by the firmware. */
184 int bitrate; /* in 100s of kilobits */
186 u16 agere_txratectrl;
187 u16 intersil_txratectrl;
188 } bitrate_table[] = {
189 {110, 1, 3, 15}, /* Entry 0 is the default */
198 #define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
200 /********************************************************************/
202 /********************************************************************/
204 /* Beginning of the Tx descriptor, used in TxExc handling */
205 struct hermes_txexc_data {
206 struct hermes_tx_descriptor desc;
210 } __attribute__ ((packed));
212 /* Rx frame header except compatibility 802.3 header */
213 struct hermes_rx_descriptor {
234 } __attribute__ ((packed));
236 /********************************************************************/
237 /* Function prototypes */
238 /********************************************************************/
240 static int __orinoco_program_rids(struct net_device *dev);
241 static void __orinoco_set_multicast_list(struct net_device *dev);
243 /********************************************************************/
244 /* Internal helper functions */
245 /********************************************************************/
247 static inline void set_port_type(struct orinoco_private *priv)
249 switch (priv->iw_mode) {
252 priv->createibss = 0;
255 if (priv->prefer_port3) {
257 priv->createibss = 0;
259 priv->port_type = priv->ibss_port;
260 priv->createibss = 1;
263 case IW_MODE_MONITOR:
265 priv->createibss = 0;
268 printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
273 #define ORINOCO_MAX_BSS_COUNT 64
274 static int orinoco_bss_data_allocate(struct orinoco_private *priv)
280 kzalloc(ORINOCO_MAX_BSS_COUNT * sizeof(bss_element), GFP_KERNEL);
281 if (!priv->bss_data) {
282 printk(KERN_WARNING "Out of memory allocating beacons");
288 static void orinoco_bss_data_free(struct orinoco_private *priv)
290 kfree(priv->bss_data);
291 priv->bss_data = NULL;
294 static void orinoco_bss_data_init(struct orinoco_private *priv)
298 INIT_LIST_HEAD(&priv->bss_free_list);
299 INIT_LIST_HEAD(&priv->bss_list);
300 for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
301 list_add_tail(&priv->bss_data[i].list, &priv->bss_free_list);
304 /********************************************************************/
306 /********************************************************************/
308 static int orinoco_open(struct net_device *dev)
310 struct orinoco_private *priv = netdev_priv(dev);
314 if (orinoco_lock(priv, &flags) != 0)
317 err = __orinoco_up(dev);
322 orinoco_unlock(priv, &flags);
327 static int orinoco_stop(struct net_device *dev)
329 struct orinoco_private *priv = netdev_priv(dev);
332 /* We mustn't use orinoco_lock() here, because we need to be
333 able to close the interface even if hw_unavailable is set
334 (e.g. as we're released after a PC Card removal) */
335 spin_lock_irq(&priv->lock);
339 err = __orinoco_down(dev);
341 spin_unlock_irq(&priv->lock);
346 static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
348 struct orinoco_private *priv = netdev_priv(dev);
353 static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
355 struct orinoco_private *priv = netdev_priv(dev);
356 hermes_t *hw = &priv->hw;
357 struct iw_statistics *wstats = &priv->wstats;
361 if (! netif_device_present(dev)) {
362 printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
364 return NULL; /* FIXME: Can we do better than this? */
367 /* If busy, return the old stats. Returning NULL may cause
368 * the interface to disappear from /proc/net/wireless */
369 if (orinoco_lock(priv, &flags) != 0)
372 /* We can't really wait for the tallies inquiry command to
373 * complete, so we just use the previous results and trigger
374 * a new tallies inquiry command for next time - Jean II */
375 /* FIXME: Really we should wait for the inquiry to come back -
376 * as it is the stats we give don't make a whole lot of sense.
377 * Unfortunately, it's not clear how to do that within the
378 * wireless extensions framework: I think we're in user
379 * context, but a lock seems to be held by the time we get in
380 * here so we're not safe to sleep here. */
381 hermes_inquire(hw, HERMES_INQ_TALLIES);
383 if (priv->iw_mode == IW_MODE_ADHOC) {
384 memset(&wstats->qual, 0, sizeof(wstats->qual));
385 /* If a spy address is defined, we report stats of the
386 * first spy address - Jean II */
387 if (SPY_NUMBER(priv)) {
388 wstats->qual.qual = priv->spy_data.spy_stat[0].qual;
389 wstats->qual.level = priv->spy_data.spy_stat[0].level;
390 wstats->qual.noise = priv->spy_data.spy_stat[0].noise;
391 wstats->qual.updated = priv->spy_data.spy_stat[0].updated;
395 __le16 qual, signal, noise, unused;
396 } __attribute__ ((packed)) cq;
398 err = HERMES_READ_RECORD(hw, USER_BAP,
399 HERMES_RID_COMMSQUALITY, &cq);
402 wstats->qual.qual = (int)le16_to_cpu(cq.qual);
403 wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
404 wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
405 wstats->qual.updated = 7;
409 orinoco_unlock(priv, &flags);
413 static void orinoco_set_multicast_list(struct net_device *dev)
415 struct orinoco_private *priv = netdev_priv(dev);
418 if (orinoco_lock(priv, &flags) != 0) {
419 printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
420 "called when hw_unavailable\n", dev->name);
424 __orinoco_set_multicast_list(dev);
425 orinoco_unlock(priv, &flags);
428 static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
430 struct orinoco_private *priv = netdev_priv(dev);
432 if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
435 if ( (new_mtu + ENCAPS_OVERHEAD + IEEE80211_HLEN) >
436 (priv->nicbuf_size - ETH_HLEN) )
444 /********************************************************************/
446 /********************************************************************/
448 static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
450 struct orinoco_private *priv = netdev_priv(dev);
451 struct net_device_stats *stats = &priv->stats;
452 hermes_t *hw = &priv->hw;
454 u16 txfid = priv->txfid;
457 struct hermes_tx_descriptor desc;
460 if (! netif_running(dev)) {
461 printk(KERN_ERR "%s: Tx on stopped device!\n",
463 return NETDEV_TX_BUSY;
466 if (netif_queue_stopped(dev)) {
467 printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
469 return NETDEV_TX_BUSY;
472 if (orinoco_lock(priv, &flags) != 0) {
473 printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
475 return NETDEV_TX_BUSY;
478 if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) {
479 /* Oops, the firmware hasn't established a connection,
480 silently drop the packet (this seems to be the
485 /* Check packet length */
486 if (skb->len < ETH_HLEN)
489 eh = (struct ethhdr *)skb->data;
491 memset(&desc, 0, sizeof(desc));
492 desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX);
493 err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0);
496 printk(KERN_ERR "%s: Error %d writing Tx descriptor "
497 "to BAP\n", dev->name, err);
501 /* Clear the 802.11 header and data length fields - some
502 * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
503 * if this isn't done. */
504 hermes_clear_words(hw, HERMES_DATA0,
505 HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
507 /* Encapsulate Ethernet-II frames */
508 if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
509 struct header_struct {
510 struct ethhdr eth; /* 802.3 header */
511 u8 encap[6]; /* 802.2 header */
512 } __attribute__ ((packed)) hdr;
514 /* Strip destination and source from the data */
515 skb_pull(skb, 2 * ETH_ALEN);
516 data_off = HERMES_802_2_OFFSET + sizeof(encaps_hdr);
518 /* And move them to a separate header */
519 memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
520 hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len);
521 memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
523 err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr),
524 txfid, HERMES_802_3_OFFSET);
527 printk(KERN_ERR "%s: Error %d writing packet "
528 "header to BAP\n", dev->name, err);
531 } else { /* IEEE 802.3 frame */
532 data_off = HERMES_802_3_OFFSET;
535 err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len,
538 printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
543 /* Finally, we actually initiate the send */
544 netif_stop_queue(dev);
546 err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
549 netif_start_queue(dev);
551 printk(KERN_ERR "%s: Error %d transmitting packet\n",
556 dev->trans_start = jiffies;
557 stats->tx_bytes += data_off + skb->len;
565 orinoco_unlock(priv, &flags);
571 schedule_work(&priv->reset_work);
572 orinoco_unlock(priv, &flags);
573 return NETDEV_TX_BUSY;
576 static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
578 struct orinoco_private *priv = netdev_priv(dev);
579 u16 fid = hermes_read_regn(hw, ALLOCFID);
581 if (fid != priv->txfid) {
582 if (fid != DUMMY_FID)
583 printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
588 hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
591 static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
593 struct orinoco_private *priv = netdev_priv(dev);
594 struct net_device_stats *stats = &priv->stats;
598 netif_wake_queue(dev);
600 hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
603 static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
605 struct orinoco_private *priv = netdev_priv(dev);
606 struct net_device_stats *stats = &priv->stats;
607 u16 fid = hermes_read_regn(hw, TXCOMPLFID);
609 struct hermes_txexc_data hdr;
612 if (fid == DUMMY_FID)
613 return; /* Nothing's really happened */
615 /* Read part of the frame header - we need status and addr1 */
616 err = hermes_bap_pread(hw, IRQ_BAP, &hdr,
617 sizeof(struct hermes_txexc_data),
620 hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
624 printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
625 "(FID=%04X error %d)\n",
626 dev->name, fid, err);
630 DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name,
633 /* We produce a TXDROP event only for retry or lifetime
634 * exceeded, because that's the only status that really mean
635 * that this particular node went away.
636 * Other errors means that *we* screwed up. - Jean II */
637 status = le16_to_cpu(hdr.desc.status);
638 if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
639 union iwreq_data wrqu;
641 /* Copy 802.11 dest address.
642 * We use the 802.11 header because the frame may
643 * not be 802.3 or may be mangled...
644 * In Ad-Hoc mode, it will be the node address.
645 * In managed mode, it will be most likely the AP addr
646 * User space will figure out how to convert it to
647 * whatever it needs (IP address or else).
649 memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN);
650 wrqu.addr.sa_family = ARPHRD_ETHER;
652 /* Send event to user space */
653 wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
656 netif_wake_queue(dev);
659 static void orinoco_tx_timeout(struct net_device *dev)
661 struct orinoco_private *priv = netdev_priv(dev);
662 struct net_device_stats *stats = &priv->stats;
663 struct hermes *hw = &priv->hw;
665 printk(KERN_WARNING "%s: Tx timeout! "
666 "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
667 dev->name, hermes_read_regn(hw, ALLOCFID),
668 hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
672 schedule_work(&priv->reset_work);
675 /********************************************************************/
676 /* Rx path (data frames) */
677 /********************************************************************/
679 /* Does the frame have a SNAP header indicating it should be
680 * de-encapsulated to Ethernet-II? */
681 static inline int is_ethersnap(void *_hdr)
685 /* We de-encapsulate all packets which, a) have SNAP headers
686 * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
687 * and where b) the OUI of the SNAP header is 00:00:00 or
688 * 00:00:f8 - we need both because different APs appear to use
689 * different OUIs for some reason */
690 return (memcmp(hdr, &encaps_hdr, 5) == 0)
691 && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) );
694 static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
695 int level, int noise)
697 struct iw_quality wstats;
698 wstats.level = level - 0x95;
699 wstats.noise = noise - 0x95;
700 wstats.qual = (level > noise) ? (level - noise) : 0;
702 /* Update spy records */
703 wireless_spy_update(dev, mac, &wstats);
706 static void orinoco_stat_gather(struct net_device *dev,
708 struct hermes_rx_descriptor *desc)
710 struct orinoco_private *priv = netdev_priv(dev);
712 /* Using spy support with lots of Rx packets, like in an
713 * infrastructure (AP), will really slow down everything, because
714 * the MAC address must be compared to each entry of the spy list.
715 * If the user really asks for it (set some address in the
716 * spy list), we do it, but he will pay the price.
717 * Note that to get here, you need both WIRELESS_SPY
718 * compiled in AND some addresses in the list !!!
720 /* Note : gcc will optimise the whole section away if
721 * WIRELESS_SPY is not defined... - Jean II */
722 if (SPY_NUMBER(priv)) {
723 orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN,
724 desc->signal, desc->silence);
729 * orinoco_rx_monitor - handle received monitor frames.
734 * desc rx descriptor of the frame
736 * Call context: interrupt
738 static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
739 struct hermes_rx_descriptor *desc)
741 u32 hdrlen = 30; /* return full header by default */
747 struct orinoco_private *priv = netdev_priv(dev);
748 struct net_device_stats *stats = &priv->stats;
749 hermes_t *hw = &priv->hw;
751 len = le16_to_cpu(desc->data_len);
753 /* Determine the size of the header and the data */
754 fc = le16_to_cpu(desc->frame_ctl);
755 switch (fc & IEEE80211_FCTL_FTYPE) {
756 case IEEE80211_FTYPE_DATA:
757 if ((fc & IEEE80211_FCTL_TODS)
758 && (fc & IEEE80211_FCTL_FROMDS))
764 case IEEE80211_FTYPE_MGMT:
768 case IEEE80211_FTYPE_CTL:
769 switch (fc & IEEE80211_FCTL_STYPE) {
770 case IEEE80211_STYPE_PSPOLL:
771 case IEEE80211_STYPE_RTS:
772 case IEEE80211_STYPE_CFEND:
773 case IEEE80211_STYPE_CFENDACK:
776 case IEEE80211_STYPE_CTS:
777 case IEEE80211_STYPE_ACK:
783 /* Unknown frame type */
787 /* sanity check the length */
788 if (datalen > IEEE80211_DATA_LEN + 12) {
789 printk(KERN_DEBUG "%s: oversized monitor frame, "
790 "data length = %d\n", dev->name, datalen);
791 stats->rx_length_errors++;
795 skb = dev_alloc_skb(hdrlen + datalen);
797 printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
802 /* Copy the 802.11 header to the skb */
803 memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen);
804 skb_reset_mac_header(skb);
806 /* If any, copy the data from the card to the skb */
808 err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
809 ALIGN(datalen, 2), rxfid,
810 HERMES_802_2_OFFSET);
812 printk(KERN_ERR "%s: error %d reading monitor frame\n",
819 skb->ip_summed = CHECKSUM_NONE;
820 skb->pkt_type = PACKET_OTHERHOST;
821 skb->protocol = __constant_htons(ETH_P_802_2);
823 dev->last_rx = jiffies;
825 stats->rx_bytes += skb->len;
831 dev_kfree_skb_irq(skb);
837 static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
839 struct orinoco_private *priv = netdev_priv(dev);
840 struct net_device_stats *stats = &priv->stats;
841 struct iw_statistics *wstats = &priv->wstats;
842 struct sk_buff *skb = NULL;
843 u16 rxfid, status, fc;
845 struct hermes_rx_descriptor desc;
849 rxfid = hermes_read_regn(hw, RXFID);
851 err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc),
854 printk(KERN_ERR "%s: error %d reading Rx descriptor. "
855 "Frame dropped.\n", dev->name, err);
859 status = le16_to_cpu(desc.status);
861 if (status & HERMES_RXSTAT_BADCRC) {
862 DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
864 stats->rx_crc_errors++;
868 /* Handle frames in monitor mode */
869 if (priv->iw_mode == IW_MODE_MONITOR) {
870 orinoco_rx_monitor(dev, rxfid, &desc);
874 if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
875 DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
877 wstats->discard.code++;
881 length = le16_to_cpu(desc.data_len);
882 fc = le16_to_cpu(desc.frame_ctl);
885 if (length < 3) { /* No for even an 802.2 LLC header */
886 /* At least on Symbol firmware with PCF we get quite a
887 lot of these legitimately - Poll frames with no
891 if (length > IEEE80211_DATA_LEN) {
892 printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
894 stats->rx_length_errors++;
898 /* We need space for the packet data itself, plus an ethernet
899 header, plus 2 bytes so we can align the IP header on a
900 32bit boundary, plus 1 byte so we can read in odd length
901 packets from the card, which has an IO granularity of 16
903 skb = dev_alloc_skb(length+ETH_HLEN+2+1);
905 printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
910 /* We'll prepend the header, so reserve space for it. The worst
911 case is no decapsulation, when 802.3 header is prepended and
912 nothing is removed. 2 is for aligning the IP header. */
913 skb_reserve(skb, ETH_HLEN + 2);
915 err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length),
916 ALIGN(length, 2), rxfid,
917 HERMES_802_2_OFFSET);
919 printk(KERN_ERR "%s: error %d reading frame. "
920 "Frame dropped.\n", dev->name, err);
924 /* Handle decapsulation
925 * In most cases, the firmware tell us about SNAP frames.
926 * For some reason, the SNAP frames sent by LinkSys APs
927 * are not properly recognised by most firmwares.
928 * So, check ourselves */
929 if (length >= ENCAPS_OVERHEAD &&
930 (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
931 ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
932 is_ethersnap(skb->data))) {
933 /* These indicate a SNAP within 802.2 LLC within
934 802.11 frame which we'll need to de-encapsulate to
935 the original EthernetII frame. */
936 hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD);
938 /* 802.3 frame - prepend 802.3 header as is */
939 hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN);
940 hdr->h_proto = htons(length);
942 memcpy(hdr->h_dest, desc.addr1, ETH_ALEN);
943 if (fc & IEEE80211_FCTL_FROMDS)
944 memcpy(hdr->h_source, desc.addr3, ETH_ALEN);
946 memcpy(hdr->h_source, desc.addr2, ETH_ALEN);
948 dev->last_rx = jiffies;
949 skb->protocol = eth_type_trans(skb, dev);
950 skb->ip_summed = CHECKSUM_NONE;
951 if (fc & IEEE80211_FCTL_TODS)
952 skb->pkt_type = PACKET_OTHERHOST;
954 /* Process the wireless stats if needed */
955 orinoco_stat_gather(dev, skb, &desc);
957 /* Pass the packet to the networking stack */
960 stats->rx_bytes += length;
965 dev_kfree_skb_irq(skb);
971 /********************************************************************/
972 /* Rx path (info frames) */
973 /********************************************************************/
975 static void print_linkstatus(struct net_device *dev, u16 status)
979 if (suppress_linkstatus)
983 case HERMES_LINKSTATUS_NOT_CONNECTED:
986 case HERMES_LINKSTATUS_CONNECTED:
989 case HERMES_LINKSTATUS_DISCONNECTED:
992 case HERMES_LINKSTATUS_AP_CHANGE:
995 case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
996 s = "AP Out of Range";
998 case HERMES_LINKSTATUS_AP_IN_RANGE:
1001 case HERMES_LINKSTATUS_ASSOC_FAILED:
1002 s = "Association Failed";
1008 printk(KERN_INFO "%s: New link status: %s (%04x)\n",
1009 dev->name, s, status);
1012 /* Search scan results for requested BSSID, join it if found */
1013 static void orinoco_join_ap(struct work_struct *work)
1015 struct orinoco_private *priv =
1016 container_of(work, struct orinoco_private, join_work);
1017 struct net_device *dev = priv->ndev;
1018 struct hermes *hw = &priv->hw;
1020 unsigned long flags;
1024 } __attribute__ ((packed)) req;
1025 const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
1026 struct prism2_scan_apinfo *atom = NULL;
1032 /* Allocate buffer for scan results */
1033 buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL);
1037 if (orinoco_lock(priv, &flags) != 0)
1040 /* Sanity checks in case user changed something in the meantime */
1041 if (! priv->bssid_fixed)
1044 if (strlen(priv->desired_essid) == 0)
1047 /* Read scan results from the firmware */
1048 err = hermes_read_ltv(hw, USER_BAP,
1049 HERMES_RID_SCANRESULTSTABLE,
1050 MAX_SCAN_LEN, &len, buf);
1052 printk(KERN_ERR "%s: Cannot read scan results\n",
1057 len = HERMES_RECLEN_TO_BYTES(len);
1059 /* Go through the scan results looking for the channel of the AP
1060 * we were requested to join */
1061 for (; offset + atom_len <= len; offset += atom_len) {
1062 atom = (struct prism2_scan_apinfo *) (buf + offset);
1063 if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) {
1070 DEBUG(1, "%s: Requested AP not found in scan results\n",
1075 memcpy(req.bssid, priv->desired_bssid, ETH_ALEN);
1076 req.channel = atom->channel; /* both are little-endian */
1077 err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST,
1080 printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
1083 orinoco_unlock(priv, &flags);
1089 /* Send new BSSID to userspace */
1090 static void orinoco_send_wevents(struct work_struct *work)
1092 struct orinoco_private *priv =
1093 container_of(work, struct orinoco_private, wevent_work);
1094 struct net_device *dev = priv->ndev;
1095 struct hermes *hw = &priv->hw;
1096 union iwreq_data wrqu;
1098 unsigned long flags;
1100 if (orinoco_lock(priv, &flags) != 0)
1103 err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID,
1104 ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
1108 wrqu.ap_addr.sa_family = ARPHRD_ETHER;
1110 /* Send event to user space */
1111 wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
1114 orinoco_unlock(priv, &flags);
1118 static inline void orinoco_clear_scan_results(struct orinoco_private *priv,
1119 unsigned long scan_age)
1122 bss_element *tmp_bss;
1124 /* Blow away current list of scan results */
1125 list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
1127 time_after(jiffies, bss->last_scanned + scan_age)) {
1128 list_move_tail(&bss->list, &priv->bss_free_list);
1129 /* Don't blow away ->list, just BSS data */
1130 memset(bss, 0, sizeof(bss->bss));
1131 bss->last_scanned = 0;
1136 static int orinoco_process_scan_results(struct net_device *dev,
1140 struct orinoco_private *priv = netdev_priv(dev);
1141 int offset; /* In the scan data */
1142 union hermes_scan_info *atom;
1145 switch (priv->firmware_type) {
1146 case FIRMWARE_TYPE_AGERE:
1147 atom_len = sizeof(struct agere_scan_apinfo);
1150 case FIRMWARE_TYPE_SYMBOL:
1151 /* Lack of documentation necessitates this hack.
1152 * Different firmwares have 68 or 76 byte long atoms.
1153 * We try modulo first. If the length divides by both,
1154 * we check what would be the channel in the second
1155 * frame for a 68-byte atom. 76-byte atoms have 0 there.
1156 * Valid channel cannot be 0. */
1161 else if (len >= 1292 && buf[68] == 0)
1167 case FIRMWARE_TYPE_INTERSIL:
1169 if (priv->has_hostscan) {
1170 atom_len = le16_to_cpup((__le16 *)buf);
1171 /* Sanity check for atom_len */
1172 if (atom_len < sizeof(struct prism2_scan_apinfo)) {
1173 printk(KERN_ERR "%s: Invalid atom_len in scan "
1174 "data: %d\n", dev->name, atom_len);
1178 atom_len = offsetof(struct prism2_scan_apinfo, atim);
1184 /* Check that we got an whole number of atoms */
1185 if ((len - offset) % atom_len) {
1186 printk(KERN_ERR "%s: Unexpected scan data length %d, "
1187 "atom_len %d, offset %d\n", dev->name, len,
1192 orinoco_clear_scan_results(priv, msecs_to_jiffies(15000));
1194 /* Read the entries one by one */
1195 for (; offset + atom_len <= len; offset += atom_len) {
1197 bss_element *bss = NULL;
1200 atom = (union hermes_scan_info *) (buf + offset);
1202 /* Try to update an existing bss first */
1203 list_for_each_entry(bss, &priv->bss_list, list) {
1204 if (compare_ether_addr(bss->bss.a.bssid, atom->a.bssid))
1206 if (le16_to_cpu(bss->bss.a.essid_len) !=
1207 le16_to_cpu(atom->a.essid_len))
1209 if (memcmp(bss->bss.a.essid, atom->a.essid,
1210 le16_to_cpu(atom->a.essid_len)))
1216 /* Grab a bss off the free list */
1217 if (!found && !list_empty(&priv->bss_free_list)) {
1218 bss = list_entry(priv->bss_free_list.next,
1220 list_del(priv->bss_free_list.next);
1222 list_add_tail(&bss->list, &priv->bss_list);
1226 /* Always update the BSS to get latest beacon info */
1227 memcpy(&bss->bss, atom, sizeof(bss->bss));
1228 bss->last_scanned = jiffies;
1235 static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
1237 struct orinoco_private *priv = netdev_priv(dev);
1242 } __attribute__ ((packed)) info;
1246 /* This is an answer to an INQUIRE command that we did earlier,
1247 * or an information "event" generated by the card
1248 * The controller return to us a pseudo frame containing
1249 * the information in question - Jean II */
1250 infofid = hermes_read_regn(hw, INFOFID);
1252 /* Read the info frame header - don't try too hard */
1253 err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
1256 printk(KERN_ERR "%s: error %d reading info frame. "
1257 "Frame dropped.\n", dev->name, err);
1261 len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
1262 type = le16_to_cpu(info.type);
1265 case HERMES_INQ_TALLIES: {
1266 struct hermes_tallies_frame tallies;
1267 struct iw_statistics *wstats = &priv->wstats;
1269 if (len > sizeof(tallies)) {
1270 printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
1272 len = sizeof(tallies);
1275 err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len,
1276 infofid, sizeof(info));
1280 /* Increment our various counters */
1281 /* wstats->discard.nwid - no wrong BSSID stuff */
1282 wstats->discard.code +=
1283 le16_to_cpu(tallies.RxWEPUndecryptable);
1284 if (len == sizeof(tallies))
1285 wstats->discard.code +=
1286 le16_to_cpu(tallies.RxDiscards_WEPICVError) +
1287 le16_to_cpu(tallies.RxDiscards_WEPExcluded);
1288 wstats->discard.misc +=
1289 le16_to_cpu(tallies.TxDiscardsWrongSA);
1290 wstats->discard.fragment +=
1291 le16_to_cpu(tallies.RxMsgInBadMsgFragments);
1292 wstats->discard.retries +=
1293 le16_to_cpu(tallies.TxRetryLimitExceeded);
1294 /* wstats->miss.beacon - no match */
1297 case HERMES_INQ_LINKSTATUS: {
1298 struct hermes_linkstatus linkstatus;
1302 if (priv->iw_mode == IW_MODE_MONITOR)
1305 if (len != sizeof(linkstatus)) {
1306 printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
1311 err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len,
1312 infofid, sizeof(info));
1315 newstatus = le16_to_cpu(linkstatus.linkstatus);
1317 /* Symbol firmware uses "out of range" to signal that
1318 * the hostscan frame can be requested. */
1319 if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
1320 priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
1321 priv->has_hostscan && priv->scan_inprogress) {
1322 hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
1326 connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
1327 || (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
1328 || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
1331 netif_carrier_on(dev);
1332 else if (!ignore_disconnect)
1333 netif_carrier_off(dev);
1335 if (newstatus != priv->last_linkstatus) {
1336 priv->last_linkstatus = newstatus;
1337 print_linkstatus(dev, newstatus);
1338 /* The info frame contains only one word which is the
1339 * status (see hermes.h). The status is pretty boring
1340 * in itself, that's why we export the new BSSID...
1342 schedule_work(&priv->wevent_work);
1346 case HERMES_INQ_SCAN:
1347 if (!priv->scan_inprogress && priv->bssid_fixed &&
1348 priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
1349 schedule_work(&priv->join_work);
1353 case HERMES_INQ_HOSTSCAN:
1354 case HERMES_INQ_HOSTSCAN_SYMBOL: {
1355 /* Result of a scanning. Contains information about
1356 * cells in the vicinity - Jean II */
1357 union iwreq_data wrqu;
1360 /* Scan is no longer in progress */
1361 priv->scan_inprogress = 0;
1365 printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
1370 /* Allocate buffer for results */
1371 buf = kmalloc(len, GFP_ATOMIC);
1373 /* No memory, so can't printk()... */
1376 /* Read scan data */
1377 err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len,
1378 infofid, sizeof(info));
1384 #ifdef ORINOCO_DEBUG
1387 printk(KERN_DEBUG "Scan result [%02X", buf[0]);
1388 for(i = 1; i < (len * 2); i++)
1389 printk(":%02X", buf[i]);
1392 #endif /* ORINOCO_DEBUG */
1394 if (orinoco_process_scan_results(dev, buf, len) == 0) {
1395 /* Send an empty event to user space.
1396 * We don't send the received data on the event because
1397 * it would require us to do complex transcoding, and
1398 * we want to minimise the work done in the irq handler
1399 * Use a request to extract the data - Jean II */
1400 wrqu.data.length = 0;
1401 wrqu.data.flags = 0;
1402 wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
1407 case HERMES_INQ_SEC_STAT_AGERE:
1408 /* Security status (Agere specific) */
1409 /* Ignore this frame for now */
1410 if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
1414 printk(KERN_DEBUG "%s: Unknown information frame received: "
1415 "type 0x%04x, length %d\n", dev->name, type, len);
1416 /* We don't actually do anything about it */
1421 static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
1423 if (net_ratelimit())
1424 printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
1427 /********************************************************************/
1428 /* Internal hardware control routines */
1429 /********************************************************************/
1431 int __orinoco_up(struct net_device *dev)
1433 struct orinoco_private *priv = netdev_priv(dev);
1434 struct hermes *hw = &priv->hw;
1437 netif_carrier_off(dev); /* just to make sure */
1439 err = __orinoco_program_rids(dev);
1441 printk(KERN_ERR "%s: Error %d configuring card\n",
1446 /* Fire things up again */
1447 hermes_set_irqmask(hw, ORINOCO_INTEN);
1448 err = hermes_enable_port(hw, 0);
1450 printk(KERN_ERR "%s: Error %d enabling MAC port\n",
1455 netif_start_queue(dev);
1460 int __orinoco_down(struct net_device *dev)
1462 struct orinoco_private *priv = netdev_priv(dev);
1463 struct hermes *hw = &priv->hw;
1466 netif_stop_queue(dev);
1468 if (! priv->hw_unavailable) {
1469 if (! priv->broken_disableport) {
1470 err = hermes_disable_port(hw, 0);
1472 /* Some firmwares (e.g. Intersil 1.3.x) seem
1473 * to have problems disabling the port, oh
1475 printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
1477 priv->broken_disableport = 1;
1480 hermes_set_irqmask(hw, 0);
1481 hermes_write_regn(hw, EVACK, 0xffff);
1484 /* firmware will have to reassociate */
1485 netif_carrier_off(dev);
1486 priv->last_linkstatus = 0xffff;
1491 static int orinoco_allocate_fid(struct net_device *dev)
1493 struct orinoco_private *priv = netdev_priv(dev);
1494 struct hermes *hw = &priv->hw;
1497 err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
1498 if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
1499 /* Try workaround for old Symbol firmware bug */
1500 printk(KERN_WARNING "%s: firmware ALLOC bug detected "
1501 "(old Symbol firmware?). Trying to work around... ",
1504 priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
1505 err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
1507 printk("failed!\n");
1515 int orinoco_reinit_firmware(struct net_device *dev)
1517 struct orinoco_private *priv = netdev_priv(dev);
1518 struct hermes *hw = &priv->hw;
1521 err = hermes_init(hw);
1523 err = orinoco_allocate_fid(dev);
1528 static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
1530 hermes_t *hw = &priv->hw;
1533 if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
1534 printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
1535 priv->ndev->name, priv->bitratemode);
1539 switch (priv->firmware_type) {
1540 case FIRMWARE_TYPE_AGERE:
1541 err = hermes_write_wordrec(hw, USER_BAP,
1542 HERMES_RID_CNFTXRATECONTROL,
1543 bitrate_table[priv->bitratemode].agere_txratectrl);
1545 case FIRMWARE_TYPE_INTERSIL:
1546 case FIRMWARE_TYPE_SYMBOL:
1547 err = hermes_write_wordrec(hw, USER_BAP,
1548 HERMES_RID_CNFTXRATECONTROL,
1549 bitrate_table[priv->bitratemode].intersil_txratectrl);
1558 /* Set fixed AP address */
1559 static int __orinoco_hw_set_wap(struct orinoco_private *priv)
1563 hermes_t *hw = &priv->hw;
1565 switch (priv->firmware_type) {
1566 case FIRMWARE_TYPE_AGERE:
1569 case FIRMWARE_TYPE_INTERSIL:
1570 if (priv->bssid_fixed)
1575 err = hermes_write_wordrec(hw, USER_BAP,
1576 HERMES_RID_CNFROAMINGMODE,
1579 case FIRMWARE_TYPE_SYMBOL:
1580 err = HERMES_WRITE_RECORD(hw, USER_BAP,
1581 HERMES_RID_CNFMANDATORYBSSID_SYMBOL,
1582 &priv->desired_bssid);
1588 /* Change the WEP keys and/or the current keys. Can be called
1589 * either from __orinoco_hw_setup_wep() or directly from
1590 * orinoco_ioctl_setiwencode(). In the later case the association
1591 * with the AP is not broken (if the firmware can handle it),
1592 * which is needed for 802.1x implementations. */
1593 static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
1595 hermes_t *hw = &priv->hw;
1598 switch (priv->firmware_type) {
1599 case FIRMWARE_TYPE_AGERE:
1600 err = HERMES_WRITE_RECORD(hw, USER_BAP,
1601 HERMES_RID_CNFWEPKEYS_AGERE,
1605 err = hermes_write_wordrec(hw, USER_BAP,
1606 HERMES_RID_CNFTXKEY_AGERE,
1611 case FIRMWARE_TYPE_INTERSIL:
1612 case FIRMWARE_TYPE_SYMBOL:
1617 /* Force uniform key length to work around firmware bugs */
1618 keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
1620 if (keylen > LARGE_KEY_SIZE) {
1621 printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
1622 priv->ndev->name, priv->tx_key, keylen);
1626 /* Write all 4 keys */
1627 for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
1628 err = hermes_write_ltv(hw, USER_BAP,
1629 HERMES_RID_CNFDEFAULTKEY0 + i,
1630 HERMES_BYTES_TO_RECLEN(keylen),
1631 priv->keys[i].data);
1636 /* Write the index of the key used in transmission */
1637 err = hermes_write_wordrec(hw, USER_BAP,
1638 HERMES_RID_CNFWEPDEFAULTKEYID,
1649 static int __orinoco_hw_setup_wep(struct orinoco_private *priv)
1651 hermes_t *hw = &priv->hw;
1653 int master_wep_flag;
1657 __orinoco_hw_setup_wepkeys(priv);
1659 if (priv->wep_restrict)
1660 auth_flag = HERMES_AUTH_SHARED_KEY;
1662 auth_flag = HERMES_AUTH_OPEN;
1664 switch (priv->firmware_type) {
1665 case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
1667 /* Enable the shared-key authentication. */
1668 err = hermes_write_wordrec(hw, USER_BAP,
1669 HERMES_RID_CNFAUTHENTICATION_AGERE,
1672 err = hermes_write_wordrec(hw, USER_BAP,
1673 HERMES_RID_CNFWEPENABLED_AGERE,
1679 case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
1680 case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
1682 if (priv->wep_restrict ||
1683 (priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
1684 master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
1685 HERMES_WEP_EXCL_UNENCRYPTED;
1687 master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;
1689 err = hermes_write_wordrec(hw, USER_BAP,
1690 HERMES_RID_CNFAUTHENTICATION,
1695 master_wep_flag = 0;
1697 if (priv->iw_mode == IW_MODE_MONITOR)
1698 master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
1700 /* Master WEP setting : on/off */
1701 err = hermes_write_wordrec(hw, USER_BAP,
1702 HERMES_RID_CNFWEPFLAGS_INTERSIL,
1713 static int __orinoco_program_rids(struct net_device *dev)
1715 struct orinoco_private *priv = netdev_priv(dev);
1716 hermes_t *hw = &priv->hw;
1718 struct hermes_idstring idbuf;
1720 /* Set the MAC address */
1721 err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
1722 HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
1724 printk(KERN_ERR "%s: Error %d setting MAC address\n",
1729 /* Set up the link mode */
1730 err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
1733 printk(KERN_ERR "%s: Error %d setting port type\n",
1737 /* Set the channel/frequency */
1738 if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
1739 err = hermes_write_wordrec(hw, USER_BAP,
1740 HERMES_RID_CNFOWNCHANNEL,
1743 printk(KERN_ERR "%s: Error %d setting channel %d\n",
1744 dev->name, err, priv->channel);
1749 if (priv->has_ibss) {
1752 if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
1753 printk(KERN_WARNING "%s: This firmware requires an "
1754 "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
1755 /* With wvlan_cs, in this case, we would crash.
1756 * hopefully, this driver will behave better...
1760 createibss = priv->createibss;
1763 err = hermes_write_wordrec(hw, USER_BAP,
1764 HERMES_RID_CNFCREATEIBSS,
1767 printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
1773 /* Set the desired BSSID */
1774 err = __orinoco_hw_set_wap(priv);
1776 printk(KERN_ERR "%s: Error %d setting AP address\n",
1780 /* Set the desired ESSID */
1781 idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
1782 memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
1783 /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
1784 err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
1785 HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
1788 printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
1792 err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
1793 HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
1796 printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
1801 /* Set the station name */
1802 idbuf.len = cpu_to_le16(strlen(priv->nick));
1803 memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
1804 err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
1805 HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
1808 printk(KERN_ERR "%s: Error %d setting nickname\n",
1813 /* Set AP density */
1814 if (priv->has_sensitivity) {
1815 err = hermes_write_wordrec(hw, USER_BAP,
1816 HERMES_RID_CNFSYSTEMSCALE,
1819 printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
1820 "Disabling sensitivity control\n",
1823 priv->has_sensitivity = 0;
1827 /* Set RTS threshold */
1828 err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
1831 printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
1836 /* Set fragmentation threshold or MWO robustness */
1838 err = hermes_write_wordrec(hw, USER_BAP,
1839 HERMES_RID_CNFMWOROBUST_AGERE,
1842 err = hermes_write_wordrec(hw, USER_BAP,
1843 HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
1846 printk(KERN_ERR "%s: Error %d setting fragmentation\n",
1852 err = __orinoco_hw_set_bitrate(priv);
1854 printk(KERN_ERR "%s: Error %d setting bitrate\n",
1859 /* Set power management */
1861 err = hermes_write_wordrec(hw, USER_BAP,
1862 HERMES_RID_CNFPMENABLED,
1865 printk(KERN_ERR "%s: Error %d setting up PM\n",
1870 err = hermes_write_wordrec(hw, USER_BAP,
1871 HERMES_RID_CNFMULTICASTRECEIVE,
1874 printk(KERN_ERR "%s: Error %d setting up PM\n",
1878 err = hermes_write_wordrec(hw, USER_BAP,
1879 HERMES_RID_CNFMAXSLEEPDURATION,
1882 printk(KERN_ERR "%s: Error %d setting up PM\n",
1886 err = hermes_write_wordrec(hw, USER_BAP,
1887 HERMES_RID_CNFPMHOLDOVERDURATION,
1890 printk(KERN_ERR "%s: Error %d setting up PM\n",
1896 /* Set preamble - only for Symbol so far... */
1897 if (priv->has_preamble) {
1898 err = hermes_write_wordrec(hw, USER_BAP,
1899 HERMES_RID_CNFPREAMBLE_SYMBOL,
1902 printk(KERN_ERR "%s: Error %d setting preamble\n",
1908 /* Set up encryption */
1909 if (priv->has_wep) {
1910 err = __orinoco_hw_setup_wep(priv);
1912 printk(KERN_ERR "%s: Error %d activating WEP\n",
1918 if (priv->iw_mode == IW_MODE_MONITOR) {
1919 /* Enable monitor mode */
1920 dev->type = ARPHRD_IEEE80211;
1921 err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
1922 HERMES_TEST_MONITOR, 0, NULL);
1924 /* Disable monitor mode */
1925 dev->type = ARPHRD_ETHER;
1926 err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
1927 HERMES_TEST_STOP, 0, NULL);
1932 /* Set promiscuity / multicast*/
1933 priv->promiscuous = 0;
1936 /* FIXME: what about netif_tx_lock */
1937 __orinoco_set_multicast_list(dev);
1942 /* FIXME: return int? */
1944 __orinoco_set_multicast_list(struct net_device *dev)
1946 struct orinoco_private *priv = netdev_priv(dev);
1947 hermes_t *hw = &priv->hw;
1949 int promisc, mc_count;
1951 /* The Hermes doesn't seem to have an allmulti mode, so we go
1952 * into promiscuous mode and let the upper levels deal. */
1953 if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
1954 (dev->mc_count > MAX_MULTICAST(priv)) ) {
1959 mc_count = dev->mc_count;
1962 if (promisc != priv->promiscuous) {
1963 err = hermes_write_wordrec(hw, USER_BAP,
1964 HERMES_RID_CNFPROMISCUOUSMODE,
1967 printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
1970 priv->promiscuous = promisc;
1973 if (! promisc && (mc_count || priv->mc_count) ) {
1974 struct dev_mc_list *p = dev->mc_list;
1975 struct hermes_multicast mclist;
1978 for (i = 0; i < mc_count; i++) {
1979 /* paranoia: is list shorter than mc_count? */
1981 /* paranoia: bad address size in list? */
1982 BUG_ON(p->dmi_addrlen != ETH_ALEN);
1984 memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
1989 printk(KERN_WARNING "%s: Multicast list is "
1990 "longer than mc_count\n", dev->name);
1992 err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
1993 HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
1996 printk(KERN_ERR "%s: Error %d setting multicast list.\n",
1999 priv->mc_count = mc_count;
2002 /* Since we can set the promiscuous flag when it wasn't asked
2003 for, make sure the net_device knows about it. */
2004 if (priv->promiscuous)
2005 dev->flags |= IFF_PROMISC;
2007 dev->flags &= ~IFF_PROMISC;
2010 /* This must be called from user context, without locks held - use
2011 * schedule_work() */
2012 static void orinoco_reset(struct work_struct *work)
2014 struct orinoco_private *priv =
2015 container_of(work, struct orinoco_private, reset_work);
2016 struct net_device *dev = priv->ndev;
2017 struct hermes *hw = &priv->hw;
2019 unsigned long flags;
2021 if (orinoco_lock(priv, &flags) != 0)
2022 /* When the hardware becomes available again, whatever
2023 * detects that is responsible for re-initializing
2024 * it. So no need for anything further */
2027 netif_stop_queue(dev);
2029 /* Shut off interrupts. Depending on what state the hardware
2030 * is in, this might not work, but we'll try anyway */
2031 hermes_set_irqmask(hw, 0);
2032 hermes_write_regn(hw, EVACK, 0xffff);
2034 priv->hw_unavailable++;
2035 priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
2036 netif_carrier_off(dev);
2038 orinoco_unlock(priv, &flags);
2040 /* Scanning support: Cleanup of driver struct */
2041 orinoco_clear_scan_results(priv, 0);
2042 priv->scan_inprogress = 0;
2044 if (priv->hard_reset) {
2045 err = (*priv->hard_reset)(priv);
2047 printk(KERN_ERR "%s: orinoco_reset: Error %d "
2048 "performing hard reset\n", dev->name, err);
2053 err = orinoco_reinit_firmware(dev);
2055 printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
2060 spin_lock_irq(&priv->lock); /* This has to be called from user context */
2062 priv->hw_unavailable--;
2064 /* priv->open or priv->hw_unavailable might have changed while
2065 * we dropped the lock */
2066 if (priv->open && (! priv->hw_unavailable)) {
2067 err = __orinoco_up(dev);
2069 printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
2072 dev->trans_start = jiffies;
2075 spin_unlock_irq(&priv->lock);
2079 hermes_set_irqmask(hw, 0);
2080 netif_device_detach(dev);
2081 printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
2084 /********************************************************************/
2085 /* Interrupt handler */
2086 /********************************************************************/
2088 static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
2090 printk(KERN_DEBUG "%s: TICK\n", dev->name);
2093 static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
2095 /* This seems to happen a fair bit under load, but ignoring it
2096 seems to work fine...*/
2097 printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
2101 irqreturn_t orinoco_interrupt(int irq, void *dev_id)
2103 struct net_device *dev = dev_id;
2104 struct orinoco_private *priv = netdev_priv(dev);
2105 hermes_t *hw = &priv->hw;
2106 int count = MAX_IRQLOOPS_PER_IRQ;
2108 /* These are used to detect a runaway interrupt situation */
2109 /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
2110 * we panic and shut down the hardware */
2111 static int last_irq_jiffy = 0; /* jiffies value the last time
2113 static int loops_this_jiffy = 0;
2114 unsigned long flags;
2116 if (orinoco_lock(priv, &flags) != 0) {
2117 /* If hw is unavailable - we don't know if the irq was
2122 evstat = hermes_read_regn(hw, EVSTAT);
2123 events = evstat & hw->inten;
2125 orinoco_unlock(priv, &flags);
2129 if (jiffies != last_irq_jiffy)
2130 loops_this_jiffy = 0;
2131 last_irq_jiffy = jiffies;
2133 while (events && count--) {
2134 if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
2135 printk(KERN_WARNING "%s: IRQ handler is looping too "
2136 "much! Resetting.\n", dev->name);
2137 /* Disable interrupts for now */
2138 hermes_set_irqmask(hw, 0);
2139 schedule_work(&priv->reset_work);
2143 /* Check the card hasn't been removed */
2144 if (! hermes_present(hw)) {
2145 DEBUG(0, "orinoco_interrupt(): card removed\n");
2149 if (events & HERMES_EV_TICK)
2150 __orinoco_ev_tick(dev, hw);
2151 if (events & HERMES_EV_WTERR)
2152 __orinoco_ev_wterr(dev, hw);
2153 if (events & HERMES_EV_INFDROP)
2154 __orinoco_ev_infdrop(dev, hw);
2155 if (events & HERMES_EV_INFO)
2156 __orinoco_ev_info(dev, hw);
2157 if (events & HERMES_EV_RX)
2158 __orinoco_ev_rx(dev, hw);
2159 if (events & HERMES_EV_TXEXC)
2160 __orinoco_ev_txexc(dev, hw);
2161 if (events & HERMES_EV_TX)
2162 __orinoco_ev_tx(dev, hw);
2163 if (events & HERMES_EV_ALLOC)
2164 __orinoco_ev_alloc(dev, hw);
2166 hermes_write_regn(hw, EVACK, evstat);
2168 evstat = hermes_read_regn(hw, EVSTAT);
2169 events = evstat & hw->inten;
2172 orinoco_unlock(priv, &flags);
2176 /********************************************************************/
2177 /* Initialization */
2178 /********************************************************************/
2181 u16 id, variant, major, minor;
2182 } __attribute__ ((packed));
2184 static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
2186 if (nic_id->id < 0x8000)
2187 return FIRMWARE_TYPE_AGERE;
2188 else if (nic_id->id == 0x8000 && nic_id->major == 0)
2189 return FIRMWARE_TYPE_SYMBOL;
2191 return FIRMWARE_TYPE_INTERSIL;
2194 /* Set priv->firmware type, determine firmware properties */
2195 static int determine_firmware(struct net_device *dev)
2197 struct orinoco_private *priv = netdev_priv(dev);
2198 hermes_t *hw = &priv->hw;
2200 struct comp_id nic_id, sta_id;
2201 unsigned int firmver;
2202 char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2)));
2204 /* Get the hardware version */
2205 err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
2207 printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n",
2212 le16_to_cpus(&nic_id.id);
2213 le16_to_cpus(&nic_id.variant);
2214 le16_to_cpus(&nic_id.major);
2215 le16_to_cpus(&nic_id.minor);
2216 printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n",
2217 dev->name, nic_id.id, nic_id.variant,
2218 nic_id.major, nic_id.minor);
2220 priv->firmware_type = determine_firmware_type(&nic_id);
2222 /* Get the firmware version */
2223 err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
2225 printk(KERN_ERR "%s: Cannot read station identity: error %d\n",
2230 le16_to_cpus(&sta_id.id);
2231 le16_to_cpus(&sta_id.variant);
2232 le16_to_cpus(&sta_id.major);
2233 le16_to_cpus(&sta_id.minor);
2234 printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n",
2235 dev->name, sta_id.id, sta_id.variant,
2236 sta_id.major, sta_id.minor);
2238 switch (sta_id.id) {
2240 printk(KERN_ERR "%s: Primary firmware is active\n",
2244 printk(KERN_ERR "%s: Tertiary firmware is active\n",
2247 case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */
2248 case 0x21: /* Symbol Spectrum24 Trilogy */
2251 printk(KERN_NOTICE "%s: Unknown station ID, please report\n",
2256 /* Default capabilities */
2257 priv->has_sensitivity = 1;
2259 priv->has_preamble = 0;
2260 priv->has_port3 = 1;
2263 priv->has_big_wep = 0;
2265 /* Determine capabilities from the firmware version */
2266 switch (priv->firmware_type) {
2267 case FIRMWARE_TYPE_AGERE:
2268 /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
2269 ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
2270 snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
2271 "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
2273 firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
2275 priv->has_ibss = (firmver >= 0x60006);
2276 priv->has_wep = (firmver >= 0x40020);
2277 priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
2278 Gold cards from the others? */
2279 priv->has_mwo = (firmver >= 0x60000);
2280 priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
2281 priv->ibss_port = 1;
2282 priv->has_hostscan = (firmver >= 0x8000a);
2283 priv->broken_monitor = (firmver >= 0x80000);
2285 /* Tested with Agere firmware :
2286 * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
2287 * Tested CableTron firmware : 4.32 => Anton */
2289 case FIRMWARE_TYPE_SYMBOL:
2290 /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
2291 /* Intel MAC : 00:02:B3:* */
2292 /* 3Com MAC : 00:50:DA:* */
2293 memset(tmp, 0, sizeof(tmp));
2294 /* Get the Symbol firmware version */
2295 err = hermes_read_ltv(hw, USER_BAP,
2296 HERMES_RID_SECONDARYVERSION_SYMBOL,
2297 SYMBOL_MAX_VER_LEN, NULL, &tmp);
2300 "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n",
2305 /* The firmware revision is a string, the format is
2306 * something like : "V2.20-01".
2307 * Quick and dirty parsing... - Jean II
2309 firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12)
2310 | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4)
2313 tmp[SYMBOL_MAX_VER_LEN] = '\0';
2316 snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
2319 priv->has_ibss = (firmver >= 0x20000);
2320 priv->has_wep = (firmver >= 0x15012);
2321 priv->has_big_wep = (firmver >= 0x20000);
2322 priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
2323 (firmver >= 0x29000 && firmver < 0x30000) ||
2325 priv->has_preamble = (firmver >= 0x20000);
2326 priv->ibss_port = 4;
2327 priv->broken_disableport = (firmver == 0x25013) ||
2328 (firmver >= 0x30000 && firmver <= 0x31000);
2329 priv->has_hostscan = (firmver >= 0x31001) ||
2330 (firmver >= 0x29057 && firmver < 0x30000);
2331 /* Tested with Intel firmware : 0x20015 => Jean II */
2332 /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
2334 case FIRMWARE_TYPE_INTERSIL:
2335 /* D-Link, Linksys, Adtron, ZoomAir, and many others...
2336 * Samsung, Compaq 100/200 and Proxim are slightly
2337 * different and less well tested */
2338 /* D-Link MAC : 00:40:05:* */
2339 /* Addtron MAC : 00:90:D1:* */
2340 snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
2341 "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
2344 firmver = ((unsigned long)sta_id.major << 16) |
2345 ((unsigned long)sta_id.minor << 8) | sta_id.variant;
2347 priv->has_ibss = (firmver >= 0x000700); /* FIXME */
2348 priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
2349 priv->has_pm = (firmver >= 0x000700);
2350 priv->has_hostscan = (firmver >= 0x010301);
2352 if (firmver >= 0x000800)
2353 priv->ibss_port = 0;
2355 printk(KERN_NOTICE "%s: Intersil firmware earlier "
2356 "than v0.8.x - several features not supported\n",
2358 priv->ibss_port = 1;
2362 printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name,
2368 static int orinoco_init(struct net_device *dev)
2370 struct orinoco_private *priv = netdev_priv(dev);
2371 hermes_t *hw = &priv->hw;
2373 struct hermes_idstring nickbuf;
2376 DECLARE_MAC_BUF(mac);
2378 /* No need to lock, the hw_unavailable flag is already set in
2379 * alloc_orinocodev() */
2380 priv->nicbuf_size = IEEE80211_FRAME_LEN + ETH_HLEN;
2382 /* Initialize the firmware */
2383 err = hermes_init(hw);
2385 printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
2390 err = determine_firmware(dev);
2392 printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
2397 if (priv->has_port3)
2398 printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name);
2400 printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n",
2402 if (priv->has_wep) {
2403 printk(KERN_DEBUG "%s: WEP supported, ", dev->name);
2404 if (priv->has_big_wep)
2405 printk("104-bit key\n");
2407 printk("40-bit key\n");
2410 /* Get the MAC address */
2411 err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
2412 ETH_ALEN, NULL, dev->dev_addr);
2414 printk(KERN_WARNING "%s: failed to read MAC address!\n",
2419 printk(KERN_DEBUG "%s: MAC address %s\n",
2420 dev->name, print_mac(mac, dev->dev_addr));
2422 /* Get the station name */
2423 err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
2424 sizeof(nickbuf), &reclen, &nickbuf);
2426 printk(KERN_ERR "%s: failed to read station name\n",
2431 len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
2433 len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
2434 memcpy(priv->nick, &nickbuf.val, len);
2435 priv->nick[len] = '\0';
2437 printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick);
2439 err = orinoco_allocate_fid(dev);
2441 printk(KERN_ERR "%s: failed to allocate NIC buffer!\n",
2446 /* Get allowed channels */
2447 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
2448 &priv->channel_mask);
2450 printk(KERN_ERR "%s: failed to read channel list!\n",
2455 /* Get initial AP density */
2456 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
2458 if (err || priv->ap_density < 1 || priv->ap_density > 3) {
2459 priv->has_sensitivity = 0;
2462 /* Get initial RTS threshold */
2463 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
2466 printk(KERN_ERR "%s: failed to read RTS threshold!\n",
2471 /* Get initial fragmentation settings */
2473 err = hermes_read_wordrec(hw, USER_BAP,
2474 HERMES_RID_CNFMWOROBUST_AGERE,
2477 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
2478 &priv->frag_thresh);
2480 printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
2485 /* Power management setup */
2489 err = hermes_read_wordrec(hw, USER_BAP,
2490 HERMES_RID_CNFMAXSLEEPDURATION,
2493 printk(KERN_ERR "%s: failed to read power management period!\n",
2497 err = hermes_read_wordrec(hw, USER_BAP,
2498 HERMES_RID_CNFPMHOLDOVERDURATION,
2501 printk(KERN_ERR "%s: failed to read power management timeout!\n",
2507 /* Preamble setup */
2508 if (priv->has_preamble) {
2509 err = hermes_read_wordrec(hw, USER_BAP,
2510 HERMES_RID_CNFPREAMBLE_SYMBOL,
2516 /* Set up the default configuration */
2517 priv->iw_mode = IW_MODE_INFRA;
2518 /* By default use IEEE/IBSS ad-hoc mode if we have it */
2519 priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
2520 set_port_type(priv);
2521 priv->channel = 0; /* use firmware default */
2523 priv->promiscuous = 0;
2527 /* Make the hardware available, as long as it hasn't been
2528 * removed elsewhere (e.g. by PCMCIA hot unplug) */
2529 spin_lock_irq(&priv->lock);
2530 priv->hw_unavailable--;
2531 spin_unlock_irq(&priv->lock);
2533 printk(KERN_DEBUG "%s: ready\n", dev->name);
2539 struct net_device *alloc_orinocodev(int sizeof_card,
2540 int (*hard_reset)(struct orinoco_private *))
2542 struct net_device *dev;
2543 struct orinoco_private *priv;
2545 dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
2548 priv = netdev_priv(dev);
2551 priv->card = (void *)((unsigned long)priv
2552 + sizeof(struct orinoco_private));
2556 if (orinoco_bss_data_allocate(priv))
2558 orinoco_bss_data_init(priv);
2560 /* Setup / override net_device fields */
2561 dev->init = orinoco_init;
2562 dev->hard_start_xmit = orinoco_xmit;
2563 dev->tx_timeout = orinoco_tx_timeout;
2564 dev->watchdog_timeo = HZ; /* 1 second timeout */
2565 dev->get_stats = orinoco_get_stats;
2566 dev->ethtool_ops = &orinoco_ethtool_ops;
2567 dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def;
2569 priv->wireless_data.spy_data = &priv->spy_data;
2570 dev->wireless_data = &priv->wireless_data;
2572 dev->change_mtu = orinoco_change_mtu;
2573 dev->set_multicast_list = orinoco_set_multicast_list;
2574 /* we use the default eth_mac_addr for setting the MAC addr */
2576 /* Set up default callbacks */
2577 dev->open = orinoco_open;
2578 dev->stop = orinoco_stop;
2579 priv->hard_reset = hard_reset;
2581 spin_lock_init(&priv->lock);
2583 priv->hw_unavailable = 1; /* orinoco_init() must clear this
2584 * before anything else touches the
2586 INIT_WORK(&priv->reset_work, orinoco_reset);
2587 INIT_WORK(&priv->join_work, orinoco_join_ap);
2588 INIT_WORK(&priv->wevent_work, orinoco_send_wevents);
2590 netif_carrier_off(dev);
2591 priv->last_linkstatus = 0xffff;
2600 void free_orinocodev(struct net_device *dev)
2602 struct orinoco_private *priv = netdev_priv(dev);
2604 orinoco_bss_data_free(priv);
2608 /********************************************************************/
2609 /* Wireless extensions */
2610 /********************************************************************/
2612 /* Return : < 0 -> error code ; >= 0 -> length */
2613 static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
2614 char buf[IW_ESSID_MAX_SIZE+1])
2616 hermes_t *hw = &priv->hw;
2618 struct hermes_idstring essidbuf;
2619 char *p = (char *)(&essidbuf.val);
2621 unsigned long flags;
2623 if (orinoco_lock(priv, &flags) != 0)
2626 if (strlen(priv->desired_essid) > 0) {
2627 /* We read the desired SSID from the hardware rather
2628 than from priv->desired_essid, just in case the
2629 firmware is allowed to change it on us. I'm not
2631 /* My guess is that the OWNSSID should always be whatever
2632 * we set to the card, whereas CURRENT_SSID is the one that
2633 * may change... - Jean II */
2638 rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
2639 HERMES_RID_CNFDESIREDSSID;
2641 err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
2648 err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
2649 sizeof(essidbuf), NULL, &essidbuf);
2654 len = le16_to_cpu(essidbuf.len);
2655 BUG_ON(len > IW_ESSID_MAX_SIZE);
2657 memset(buf, 0, IW_ESSID_MAX_SIZE);
2658 memcpy(buf, p, len);
2662 orinoco_unlock(priv, &flags);
2667 static long orinoco_hw_get_freq(struct orinoco_private *priv)
2670 hermes_t *hw = &priv->hw;
2674 unsigned long flags;
2676 if (orinoco_lock(priv, &flags) != 0)
2679 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
2683 /* Intersil firmware 1.3.5 returns 0 when the interface is down */
2689 if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
2690 printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
2691 priv->ndev->name, channel);
2696 freq = channel_frequency[channel-1] * 100000;
2699 orinoco_unlock(priv, &flags);
2703 return err ? err : freq;
2706 static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
2707 int *numrates, s32 *rates, int max)
2709 hermes_t *hw = &priv->hw;
2710 struct hermes_idstring list;
2711 unsigned char *p = (unsigned char *)&list.val;
2715 unsigned long flags;
2717 if (orinoco_lock(priv, &flags) != 0)
2720 err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
2721 sizeof(list), NULL, &list);
2722 orinoco_unlock(priv, &flags);
2727 num = le16_to_cpu(list.len);
2729 num = min(num, max);
2731 for (i = 0; i < num; i++) {
2732 rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
2738 static int orinoco_ioctl_getname(struct net_device *dev,
2739 struct iw_request_info *info,
2743 struct orinoco_private *priv = netdev_priv(dev);
2747 err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0);
2749 if (!err && (numrates > 2))
2750 strcpy(name, "IEEE 802.11b");
2752 strcpy(name, "IEEE 802.11-DS");
2757 static int orinoco_ioctl_setwap(struct net_device *dev,
2758 struct iw_request_info *info,
2759 struct sockaddr *ap_addr,
2762 struct orinoco_private *priv = netdev_priv(dev);
2763 int err = -EINPROGRESS; /* Call commit handler */
2764 unsigned long flags;
2765 static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
2766 static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
2768 if (orinoco_lock(priv, &flags) != 0)
2771 /* Enable automatic roaming - no sanity checks are needed */
2772 if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 ||
2773 memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) {
2774 priv->bssid_fixed = 0;
2775 memset(priv->desired_bssid, 0, ETH_ALEN);
2777 /* "off" means keep existing connection */
2778 if (ap_addr->sa_data[0] == 0) {
2779 __orinoco_hw_set_wap(priv);
2785 if (priv->firmware_type == FIRMWARE_TYPE_AGERE) {
2786 printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't "
2787 "support manual roaming\n",
2793 if (priv->iw_mode != IW_MODE_INFRA) {
2794 printk(KERN_WARNING "%s: Manual roaming supported only in "
2795 "managed mode\n", dev->name);
2800 /* Intersil firmware hangs without Desired ESSID */
2801 if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL &&
2802 strlen(priv->desired_essid) == 0) {
2803 printk(KERN_WARNING "%s: Desired ESSID must be set for "
2804 "manual roaming\n", dev->name);
2809 /* Finally, enable manual roaming */
2810 priv->bssid_fixed = 1;
2811 memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN);
2814 orinoco_unlock(priv, &flags);
2818 static int orinoco_ioctl_getwap(struct net_device *dev,
2819 struct iw_request_info *info,
2820 struct sockaddr *ap_addr,
2823 struct orinoco_private *priv = netdev_priv(dev);
2825 hermes_t *hw = &priv->hw;
2827 unsigned long flags;
2829 if (orinoco_lock(priv, &flags) != 0)
2832 ap_addr->sa_family = ARPHRD_ETHER;
2833 err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
2834 ETH_ALEN, NULL, ap_addr->sa_data);
2836 orinoco_unlock(priv, &flags);
2841 static int orinoco_ioctl_setmode(struct net_device *dev,
2842 struct iw_request_info *info,
2846 struct orinoco_private *priv = netdev_priv(dev);
2847 int err = -EINPROGRESS; /* Call commit handler */
2848 unsigned long flags;
2850 if (priv->iw_mode == *mode)
2853 if (orinoco_lock(priv, &flags) != 0)
2858 if (!priv->has_ibss && !priv->has_port3)
2865 case IW_MODE_MONITOR:
2866 if (priv->broken_monitor && !force_monitor) {
2867 printk(KERN_WARNING "%s: Monitor mode support is "
2868 "buggy in this firmware, not enabling\n",
2879 if (err == -EINPROGRESS) {
2880 priv->iw_mode = *mode;
2881 set_port_type(priv);
2884 orinoco_unlock(priv, &flags);
2889 static int orinoco_ioctl_getmode(struct net_device *dev,
2890 struct iw_request_info *info,
2894 struct orinoco_private *priv = netdev_priv(dev);
2896 *mode = priv->iw_mode;
2900 static int orinoco_ioctl_getiwrange(struct net_device *dev,
2901 struct iw_request_info *info,
2902 struct iw_point *rrq,
2905 struct orinoco_private *priv = netdev_priv(dev);
2907 struct iw_range *range = (struct iw_range *) extra;
2911 rrq->length = sizeof(struct iw_range);
2912 memset(range, 0, sizeof(struct iw_range));
2914 range->we_version_compiled = WIRELESS_EXT;
2915 range->we_version_source = 14;
2917 /* Set available channels/frequencies */
2918 range->num_channels = NUM_CHANNELS;
2920 for (i = 0; i < NUM_CHANNELS; i++) {
2921 if (priv->channel_mask & (1 << i)) {
2922 range->freq[k].i = i + 1;
2923 range->freq[k].m = channel_frequency[i] * 100000;
2924 range->freq[k].e = 1;
2928 if (k >= IW_MAX_FREQUENCIES)
2931 range->num_frequency = k;
2932 range->sensitivity = 3;
2934 if (priv->has_wep) {
2935 range->max_encoding_tokens = ORINOCO_MAX_KEYS;
2936 range->encoding_size[0] = SMALL_KEY_SIZE;
2937 range->num_encoding_sizes = 1;
2939 if (priv->has_big_wep) {
2940 range->encoding_size[1] = LARGE_KEY_SIZE;
2941 range->num_encoding_sizes = 2;
2945 if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){
2946 /* Quality stats meaningless in ad-hoc mode */
2948 range->max_qual.qual = 0x8b - 0x2f;
2949 range->max_qual.level = 0x2f - 0x95 - 1;
2950 range->max_qual.noise = 0x2f - 0x95 - 1;
2951 /* Need to get better values */
2952 range->avg_qual.qual = 0x24;
2953 range->avg_qual.level = 0xC2;
2954 range->avg_qual.noise = 0x9E;
2957 err = orinoco_hw_get_bitratelist(priv, &numrates,
2958 range->bitrate, IW_MAX_BITRATES);
2961 range->num_bitrates = numrates;
2963 /* Set an indication of the max TCP throughput in bit/s that we can
2964 * expect using this interface. May be use for QoS stuff...
2967 range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
2969 range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
2972 range->max_rts = 2347;
2973 range->min_frag = 256;
2974 range->max_frag = 2346;
2977 range->max_pmp = 65535000;
2979 range->max_pmt = 65535 * 1000; /* ??? */
2980 range->pmp_flags = IW_POWER_PERIOD;
2981 range->pmt_flags = IW_POWER_TIMEOUT;
2982 range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
2984 range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
2985 range->retry_flags = IW_RETRY_LIMIT;
2986 range->r_time_flags = IW_RETRY_LIFETIME;
2987 range->min_retry = 0;
2988 range->max_retry = 65535; /* ??? */
2989 range->min_r_time = 0;
2990 range->max_r_time = 65535 * 1000; /* ??? */
2992 /* Event capability (kernel) */
2993 IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
2994 /* Event capability (driver) */
2995 IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
2996 IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
2997 IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
2998 IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP);
3003 static int orinoco_ioctl_setiwencode(struct net_device *dev,
3004 struct iw_request_info *info,
3005 struct iw_point *erq,
3008 struct orinoco_private *priv = netdev_priv(dev);
3009 int index = (erq->flags & IW_ENCODE_INDEX) - 1;
3010 int setindex = priv->tx_key;
3011 int enable = priv->wep_on;
3012 int restricted = priv->wep_restrict;
3014 int err = -EINPROGRESS; /* Call commit handler */
3015 unsigned long flags;
3017 if (! priv->has_wep)
3021 /* We actually have a key to set - check its length */
3022 if (erq->length > LARGE_KEY_SIZE)
3025 if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
3029 if (orinoco_lock(priv, &flags) != 0)
3032 if (erq->length > 0) {
3033 if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
3034 index = priv->tx_key;
3036 /* Adjust key length to a supported value */
3037 if (erq->length > SMALL_KEY_SIZE) {
3038 xlen = LARGE_KEY_SIZE;
3039 } else if (erq->length > 0) {
3040 xlen = SMALL_KEY_SIZE;
3044 /* Switch on WEP if off */
3045 if ((!enable) && (xlen > 0)) {
3050 /* Important note : if the user do "iwconfig eth0 enc off",
3051 * we will arrive there with an index of -1. This is valid
3052 * but need to be taken care off... Jean II */
3053 if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
3054 if((index != -1) || (erq->flags == 0)) {
3059 /* Set the index : Check that the key is valid */
3060 if(priv->keys[index].len == 0) {
3068 if (erq->flags & IW_ENCODE_DISABLED)
3070 if (erq->flags & IW_ENCODE_OPEN)
3072 if (erq->flags & IW_ENCODE_RESTRICTED)
3075 if (erq->pointer && erq->length > 0) {
3076 priv->keys[index].len = cpu_to_le16(xlen);
3077 memset(priv->keys[index].data, 0,
3078 sizeof(priv->keys[index].data));
3079 memcpy(priv->keys[index].data, keybuf, erq->length);
3081 priv->tx_key = setindex;
3083 /* Try fast key change if connected and only keys are changed */
3084 if (priv->wep_on && enable && (priv->wep_restrict == restricted) &&
3085 netif_carrier_ok(dev)) {
3086 err = __orinoco_hw_setup_wepkeys(priv);
3087 /* No need to commit if successful */
3091 priv->wep_on = enable;
3092 priv->wep_restrict = restricted;
3095 orinoco_unlock(priv, &flags);
3100 static int orinoco_ioctl_getiwencode(struct net_device *dev,
3101 struct iw_request_info *info,
3102 struct iw_point *erq,
3105 struct orinoco_private *priv = netdev_priv(dev);
3106 int index = (erq->flags & IW_ENCODE_INDEX) - 1;
3108 unsigned long flags;
3110 if (! priv->has_wep)
3113 if (orinoco_lock(priv, &flags) != 0)
3116 if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
3117 index = priv->tx_key;
3121 erq->flags |= IW_ENCODE_DISABLED;
3122 erq->flags |= index + 1;
3124 if (priv->wep_restrict)
3125 erq->flags |= IW_ENCODE_RESTRICTED;
3127 erq->flags |= IW_ENCODE_OPEN;
3129 xlen = le16_to_cpu(priv->keys[index].len);
3133 memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
3135 orinoco_unlock(priv, &flags);
3139 static int orinoco_ioctl_setessid(struct net_device *dev,
3140 struct iw_request_info *info,
3141 struct iw_point *erq,
3144 struct orinoco_private *priv = netdev_priv(dev);
3145 unsigned long flags;
3147 /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
3148 * anyway... - Jean II */
3150 /* Hum... Should not use Wireless Extension constant (may change),
3151 * should use our own... - Jean II */
3152 if (erq->length > IW_ESSID_MAX_SIZE)
3155 if (orinoco_lock(priv, &flags) != 0)
3158 /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */
3159 memset(priv->desired_essid, 0, sizeof(priv->desired_essid));
3161 /* If not ANY, get the new ESSID */
3163 memcpy(priv->desired_essid, essidbuf, erq->length);
3166 orinoco_unlock(priv, &flags);
3168 return -EINPROGRESS; /* Call commit handler */
3171 static int orinoco_ioctl_getessid(struct net_device *dev,
3172 struct iw_request_info *info,
3173 struct iw_point *erq,
3176 struct orinoco_private *priv = netdev_priv(dev);
3179 unsigned long flags;
3181 if (netif_running(dev)) {
3182 err = orinoco_hw_get_essid(priv, &active, essidbuf);
3187 if (orinoco_lock(priv, &flags) != 0)
3189 memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE);
3190 erq->length = strlen(priv->desired_essid);
3191 orinoco_unlock(priv, &flags);
3199 static int orinoco_ioctl_setnick(struct net_device *dev,
3200 struct iw_request_info *info,
3201 struct iw_point *nrq,
3204 struct orinoco_private *priv = netdev_priv(dev);
3205 unsigned long flags;
3207 if (nrq->length > IW_ESSID_MAX_SIZE)
3210 if (orinoco_lock(priv, &flags) != 0)
3213 memset(priv->nick, 0, sizeof(priv->nick));
3214 memcpy(priv->nick, nickbuf, nrq->length);
3216 orinoco_unlock(priv, &flags);
3218 return -EINPROGRESS; /* Call commit handler */
3221 static int orinoco_ioctl_getnick(struct net_device *dev,
3222 struct iw_request_info *info,
3223 struct iw_point *nrq,
3226 struct orinoco_private *priv = netdev_priv(dev);
3227 unsigned long flags;
3229 if (orinoco_lock(priv, &flags) != 0)
3232 memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE);
3233 orinoco_unlock(priv, &flags);
3235 nrq->length = strlen(priv->nick);
3240 static int orinoco_ioctl_setfreq(struct net_device *dev,
3241 struct iw_request_info *info,
3242 struct iw_freq *frq,
3245 struct orinoco_private *priv = netdev_priv(dev);
3247 unsigned long flags;
3248 int err = -EINPROGRESS; /* Call commit handler */
3250 /* In infrastructure mode the AP sets the channel */
3251 if (priv->iw_mode == IW_MODE_INFRA)
3254 if ( (frq->e == 0) && (frq->m <= 1000) ) {
3255 /* Setting by channel number */
3258 /* Setting by frequency - search the table */
3262 for (i = 0; i < (6 - frq->e); i++)
3265 for (i = 0; i < NUM_CHANNELS; i++)
3266 if (frq->m == (channel_frequency[i] * mult))
3270 if ( (chan < 1) || (chan > NUM_CHANNELS) ||
3271 ! (priv->channel_mask & (1 << (chan-1)) ) )
3274 if (orinoco_lock(priv, &flags) != 0)
3277 priv->channel = chan;
3278 if (priv->iw_mode == IW_MODE_MONITOR) {
3279 /* Fast channel change - no commit if successful */
3280 hermes_t *hw = &priv->hw;
3281 err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
3282 HERMES_TEST_SET_CHANNEL,
3285 orinoco_unlock(priv, &flags);
3290 static int orinoco_ioctl_getfreq(struct net_device *dev,
3291 struct iw_request_info *info,
3292 struct iw_freq *frq,
3295 struct orinoco_private *priv = netdev_priv(dev);
3298 /* Locking done in there */
3299 tmp = orinoco_hw_get_freq(priv);
3310 static int orinoco_ioctl_getsens(struct net_device *dev,
3311 struct iw_request_info *info,
3312 struct iw_param *srq,
3315 struct orinoco_private *priv = netdev_priv(dev);
3316 hermes_t *hw = &priv->hw;
3319 unsigned long flags;
3321 if (!priv->has_sensitivity)
3324 if (orinoco_lock(priv, &flags) != 0)
3326 err = hermes_read_wordrec(hw, USER_BAP,
3327 HERMES_RID_CNFSYSTEMSCALE, &val);
3328 orinoco_unlock(priv, &flags);
3334 srq->fixed = 0; /* auto */
3339 static int orinoco_ioctl_setsens(struct net_device *dev,
3340 struct iw_request_info *info,
3341 struct iw_param *srq,
3344 struct orinoco_private *priv = netdev_priv(dev);
3345 int val = srq->value;
3346 unsigned long flags;
3348 if (!priv->has_sensitivity)
3351 if ((val < 1) || (val > 3))
3354 if (orinoco_lock(priv, &flags) != 0)
3356 priv->ap_density = val;
3357 orinoco_unlock(priv, &flags);
3359 return -EINPROGRESS; /* Call commit handler */
3362 static int orinoco_ioctl_setrts(struct net_device *dev,
3363 struct iw_request_info *info,
3364 struct iw_param *rrq,
3367 struct orinoco_private *priv = netdev_priv(dev);
3368 int val = rrq->value;
3369 unsigned long flags;
3374 if ( (val < 0) || (val > 2347) )
3377 if (orinoco_lock(priv, &flags) != 0)
3380 priv->rts_thresh = val;
3381 orinoco_unlock(priv, &flags);
3383 return -EINPROGRESS; /* Call commit handler */
3386 static int orinoco_ioctl_getrts(struct net_device *dev,
3387 struct iw_request_info *info,
3388 struct iw_param *rrq,
3391 struct orinoco_private *priv = netdev_priv(dev);
3393 rrq->value = priv->rts_thresh;
3394 rrq->disabled = (rrq->value == 2347);
3400 static int orinoco_ioctl_setfrag(struct net_device *dev,
3401 struct iw_request_info *info,
3402 struct iw_param *frq,
3405 struct orinoco_private *priv = netdev_priv(dev);
3406 int err = -EINPROGRESS; /* Call commit handler */
3407 unsigned long flags;
3409 if (orinoco_lock(priv, &flags) != 0)
3412 if (priv->has_mwo) {
3414 priv->mwo_robust = 0;
3417 printk(KERN_WARNING "%s: Fixed fragmentation is "
3418 "not supported on this firmware. "
3419 "Using MWO robust instead.\n", dev->name);
3420 priv->mwo_robust = 1;
3424 priv->frag_thresh = 2346;
3426 if ( (frq->value < 256) || (frq->value > 2346) )
3429 priv->frag_thresh = frq->value & ~0x1; /* must be even */
3433 orinoco_unlock(priv, &flags);
3438 static int orinoco_ioctl_getfrag(struct net_device *dev,
3439 struct iw_request_info *info,
3440 struct iw_param *frq,
3443 struct orinoco_private *priv = netdev_priv(dev);
3444 hermes_t *hw = &priv->hw;
3447 unsigned long flags;
3449 if (orinoco_lock(priv, &flags) != 0)
3452 if (priv->has_mwo) {
3453 err = hermes_read_wordrec(hw, USER_BAP,
3454 HERMES_RID_CNFMWOROBUST_AGERE,
3459 frq->value = val ? 2347 : 0;
3460 frq->disabled = ! val;
3463 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
3469 frq->disabled = (val >= 2346);
3473 orinoco_unlock(priv, &flags);
3478 static int orinoco_ioctl_setrate(struct net_device *dev,
3479 struct iw_request_info *info,
3480 struct iw_param *rrq,
3483 struct orinoco_private *priv = netdev_priv(dev);
3485 int bitrate; /* 100s of kilobits */
3487 unsigned long flags;
3489 /* As the user space doesn't know our highest rate, it uses -1
3490 * to ask us to set the highest rate. Test it using "iwconfig
3491 * ethX rate auto" - Jean II */
3492 if (rrq->value == -1)
3495 if (rrq->value % 100000)
3497 bitrate = rrq->value / 100000;
3500 if ( (bitrate != 10) && (bitrate != 20) &&
3501 (bitrate != 55) && (bitrate != 110) )
3504 for (i = 0; i < BITRATE_TABLE_SIZE; i++)
3505 if ( (bitrate_table[i].bitrate == bitrate) &&
3506 (bitrate_table[i].automatic == ! rrq->fixed) ) {
3514 if (orinoco_lock(priv, &flags) != 0)
3516 priv->bitratemode = ratemode;
3517 orinoco_unlock(priv, &flags);
3519 return -EINPROGRESS;
3522 static int orinoco_ioctl_getrate(struct net_device *dev,
3523 struct iw_request_info *info,
3524 struct iw_param *rrq,
3527 struct orinoco_private *priv = netdev_priv(dev);
3528 hermes_t *hw = &priv->hw;
3533 unsigned long flags;
3535 if (orinoco_lock(priv, &flags) != 0)
3538 ratemode = priv->bitratemode;
3540 BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
3542 rrq->value = bitrate_table[ratemode].bitrate * 100000;
3543 rrq->fixed = ! bitrate_table[ratemode].automatic;
3546 /* If the interface is running we try to find more about the
3548 if (netif_running(dev)) {
3549 err = hermes_read_wordrec(hw, USER_BAP,
3550 HERMES_RID_CURRENTTXRATE, &val);
3554 switch (priv->firmware_type) {
3555 case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
3556 /* Note : in Lucent firmware, the return value of
3557 * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
3558 * and therefore is totally different from the
3559 * encoding of HERMES_RID_CNFTXRATECONTROL.
3560 * Don't forget that 6Mb/s is really 5.5Mb/s */
3562 rrq->value = 5500000;
3564 rrq->value = val * 1000000;
3566 case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
3567 case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
3568 for (i = 0; i < BITRATE_TABLE_SIZE; i++)
3569 if (bitrate_table[i].intersil_txratectrl == val) {
3573 if (i >= BITRATE_TABLE_SIZE)
3574 printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
3577 rrq->value = bitrate_table[ratemode].bitrate * 100000;
3585 orinoco_unlock(priv, &flags);
3590 static int orinoco_ioctl_setpower(struct net_device *dev,
3591 struct iw_request_info *info,
3592 struct iw_param *prq,
3595 struct orinoco_private *priv = netdev_priv(dev);
3596 int err = -EINPROGRESS; /* Call commit handler */
3597 unsigned long flags;
3599 if (orinoco_lock(priv, &flags) != 0)
3602 if (prq->disabled) {
3605 switch (prq->flags & IW_POWER_MODE) {
3606 case IW_POWER_UNICAST_R:
3610 case IW_POWER_ALL_R:
3615 /* No flags : but we may have a value - Jean II */
3622 if (prq->flags & IW_POWER_TIMEOUT) {
3624 priv->pm_timeout = prq->value / 1000;
3626 if (prq->flags & IW_POWER_PERIOD) {
3628 priv->pm_period = prq->value / 1000;
3630 /* It's valid to not have a value if we are just toggling
3631 * the flags... Jean II */
3639 orinoco_unlock(priv, &flags);
3644 static int orinoco_ioctl_getpower(struct net_device *dev,
3645 struct iw_request_info *info,
3646 struct iw_param *prq,
3649 struct orinoco_private *priv = netdev_priv(dev);
3650 hermes_t *hw = &priv->hw;
3652 u16 enable, period, timeout, mcast;
3653 unsigned long flags;
3655 if (orinoco_lock(priv, &flags) != 0)
3658 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable);
3662 err = hermes_read_wordrec(hw, USER_BAP,
3663 HERMES_RID_CNFMAXSLEEPDURATION, &period);
3667 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
3671 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
3675 prq->disabled = !enable;
3676 /* Note : by default, display the period */
3677 if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
3678 prq->flags = IW_POWER_TIMEOUT;
3679 prq->value = timeout * 1000;
3681 prq->flags = IW_POWER_PERIOD;
3682 prq->value = period * 1000;
3685 prq->flags |= IW_POWER_ALL_R;
3687 prq->flags |= IW_POWER_UNICAST_R;
3690 orinoco_unlock(priv, &flags);
3695 static int orinoco_ioctl_getretry(struct net_device *dev,
3696 struct iw_request_info *info,
3697 struct iw_param *rrq,
3700 struct orinoco_private *priv = netdev_priv(dev);
3701 hermes_t *hw = &priv->hw;
3703 u16 short_limit, long_limit, lifetime;
3704 unsigned long flags;
3706 if (orinoco_lock(priv, &flags) != 0)
3709 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
3714 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
3719 err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
3724 rrq->disabled = 0; /* Can't be disabled */
3726 /* Note : by default, display the retry number */
3727 if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
3728 rrq->flags = IW_RETRY_LIFETIME;
3729 rrq->value = lifetime * 1000; /* ??? */
3731 /* By default, display the min number */
3732 if ((rrq->flags & IW_RETRY_LONG)) {
3733 rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
3734 rrq->value = long_limit;
3736 rrq->flags = IW_RETRY_LIMIT;
3737 rrq->value = short_limit;
3738 if(short_limit != long_limit)
3739 rrq->flags |= IW_RETRY_SHORT;
3744 orinoco_unlock(priv, &flags);
3749 static int orinoco_ioctl_reset(struct net_device *dev,
3750 struct iw_request_info *info,
3754 struct orinoco_private *priv = netdev_priv(dev);
3756 if (! capable(CAP_NET_ADMIN))
3759 if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) {
3760 printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name);
3762 /* Firmware reset */
3763 orinoco_reset(&priv->reset_work);
3765 printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
3767 schedule_work(&priv->reset_work);
3773 static int orinoco_ioctl_setibssport(struct net_device *dev,
3774 struct iw_request_info *info,
3779 struct orinoco_private *priv = netdev_priv(dev);
3780 int val = *( (int *) extra );
3781 unsigned long flags;
3783 if (orinoco_lock(priv, &flags) != 0)
3786 priv->ibss_port = val ;
3788 /* Actually update the mode we are using */
3789 set_port_type(priv);
3791 orinoco_unlock(priv, &flags);
3792 return -EINPROGRESS; /* Call commit handler */
3795 static int orinoco_ioctl_getibssport(struct net_device *dev,
3796 struct iw_request_info *info,
3800 struct orinoco_private *priv = netdev_priv(dev);
3801 int *val = (int *) extra;
3803 *val = priv->ibss_port;
3807 static int orinoco_ioctl_setport3(struct net_device *dev,
3808 struct iw_request_info *info,
3812 struct orinoco_private *priv = netdev_priv(dev);
3813 int val = *( (int *) extra );
3815 unsigned long flags;
3817 if (orinoco_lock(priv, &flags) != 0)
3821 case 0: /* Try to do IEEE ad-hoc mode */
3822 if (! priv->has_ibss) {
3826 priv->prefer_port3 = 0;
3830 case 1: /* Try to do Lucent proprietary ad-hoc mode */
3831 if (! priv->has_port3) {
3835 priv->prefer_port3 = 1;
3843 /* Actually update the mode we are using */
3844 set_port_type(priv);
3848 orinoco_unlock(priv, &flags);
3853 static int orinoco_ioctl_getport3(struct net_device *dev,
3854 struct iw_request_info *info,
3858 struct orinoco_private *priv = netdev_priv(dev);
3859 int *val = (int *) extra;
3861 *val = priv->prefer_port3;
3865 static int orinoco_ioctl_setpreamble(struct net_device *dev,
3866 struct iw_request_info *info,
3870 struct orinoco_private *priv = netdev_priv(dev);
3871 unsigned long flags;
3874 if (! priv->has_preamble)
3877 /* 802.11b has recently defined some short preamble.
3878 * Basically, the Phy header has been reduced in size.
3879 * This increase performance, especially at high rates
3880 * (the preamble is transmitted at 1Mb/s), unfortunately
3881 * this give compatibility troubles... - Jean II */
3882 val = *( (int *) extra );
3884 if (orinoco_lock(priv, &flags) != 0)
3892 orinoco_unlock(priv, &flags);
3894 return -EINPROGRESS; /* Call commit handler */
3897 static int orinoco_ioctl_getpreamble(struct net_device *dev,
3898 struct iw_request_info *info,
3902 struct orinoco_private *priv = netdev_priv(dev);
3903 int *val = (int *) extra;
3905 if (! priv->has_preamble)
3908 *val = priv->preamble;
3912 /* ioctl interface to hermes_read_ltv()
3913 * To use with iwpriv, pass the RID as the token argument, e.g.
3914 * iwpriv get_rid [0xfc00]
3915 * At least Wireless Tools 25 is required to use iwpriv.
3916 * For Wireless Tools 25 and 26 append "dummy" are the end. */
3917 static int orinoco_ioctl_getrid(struct net_device *dev,
3918 struct iw_request_info *info,
3919 struct iw_point *data,
3922 struct orinoco_private *priv = netdev_priv(dev);
3923 hermes_t *hw = &priv->hw;
3924 int rid = data->flags;
3927 unsigned long flags;
3929 /* It's a "get" function, but we don't want users to access the
3930 * WEP key and other raw firmware data */
3931 if (! capable(CAP_NET_ADMIN))
3934 if (rid < 0xfc00 || rid > 0xffff)
3937 if (orinoco_lock(priv, &flags) != 0)
3940 err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
3945 data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length),
3949 orinoco_unlock(priv, &flags);
3953 /* Trigger a scan (look for other cells in the vicinity */
3954 static int orinoco_ioctl_setscan(struct net_device *dev,
3955 struct iw_request_info *info,
3956 struct iw_param *srq,
3959 struct orinoco_private *priv = netdev_priv(dev);
3960 hermes_t *hw = &priv->hw;
3962 unsigned long flags;
3964 /* Note : you may have realised that, as this is a SET operation,
3965 * this is privileged and therefore a normal user can't
3967 * This is not an error, while the device perform scanning,
3968 * traffic doesn't flow, so it's a perfect DoS...
3971 if (orinoco_lock(priv, &flags) != 0)
3974 /* Scanning with port 0 disabled would fail */
3975 if (!netif_running(dev)) {
3980 /* In monitor mode, the scan results are always empty.
3981 * Probe responses are passed to the driver as received
3982 * frames and could be processed in software. */
3983 if (priv->iw_mode == IW_MODE_MONITOR) {
3988 /* Note : because we don't lock out the irq handler, the way
3989 * we access scan variables in priv is critical.
3990 * o scan_inprogress : not touched by irq handler
3991 * o scan_mode : not touched by irq handler
3992 * o scan_len : synchronised with scan_result
3993 * Before modifying anything on those variables, please think hard !
3997 priv->scan_mode = srq->flags;
3999 /* Always trigger scanning, even if it's in progress.
4000 * This way, if the info frame get lost, we will recover somewhat
4001 * gracefully - Jean II */
4003 if (priv->has_hostscan) {
4004 switch (priv->firmware_type) {
4005 case FIRMWARE_TYPE_SYMBOL:
4006 err = hermes_write_wordrec(hw, USER_BAP,
4007 HERMES_RID_CNFHOSTSCAN_SYMBOL,
4008 HERMES_HOSTSCAN_SYMBOL_ONCE |
4009 HERMES_HOSTSCAN_SYMBOL_BCAST);
4011 case FIRMWARE_TYPE_INTERSIL: {
4014 req[0] = cpu_to_le16(0x3fff); /* All channels */
4015 req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */
4016 req[2] = 0; /* Any ESSID */
4017 err = HERMES_WRITE_RECORD(hw, USER_BAP,
4018 HERMES_RID_CNFHOSTSCAN, &req);
4021 case FIRMWARE_TYPE_AGERE:
4022 err = hermes_write_wordrec(hw, USER_BAP,
4023 HERMES_RID_CNFSCANSSID_AGERE,
4028 err = hermes_inquire(hw, HERMES_INQ_SCAN);
4032 err = hermes_inquire(hw, HERMES_INQ_SCAN);
4034 /* One more client */
4036 priv->scan_inprogress = 1;
4039 orinoco_unlock(priv, &flags);
4043 #define MAX_CUSTOM_LEN 64
4045 /* Translate scan data returned from the card to a card independant
4046 * format that the Wireless Tools will understand - Jean II
4047 * Return message length or -errno for fatal errors */
4048 static inline char *orinoco_translate_scan(struct net_device *dev,
4049 struct iw_request_info *info,
4052 union hermes_scan_info *bss,
4053 unsigned int last_scanned)
4055 struct orinoco_private *priv = netdev_priv(dev);
4058 struct iw_event iwe; /* Temporary buffer */
4060 char custom[MAX_CUSTOM_LEN];
4062 /* First entry *MUST* be the AP MAC address */
4063 iwe.cmd = SIOCGIWAP;
4064 iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
4065 memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN);
4066 current_ev = iwe_stream_add_event(info, current_ev, end_buf,
4067 &iwe, IW_EV_ADDR_LEN);
4069 /* Other entries will be displayed in the order we give them */
4072 iwe.u.data.length = le16_to_cpu(bss->a.essid_len);
4073 if (iwe.u.data.length > 32)
4074 iwe.u.data.length = 32;
4075 iwe.cmd = SIOCGIWESSID;
4076 iwe.u.data.flags = 1;
4077 current_ev = iwe_stream_add_point(info, current_ev, end_buf,
4078 &iwe, bss->a.essid);
4081 iwe.cmd = SIOCGIWMODE;
4082 capabilities = le16_to_cpu(bss->a.capabilities);
4083 if (capabilities & 0x3) {
4084 if (capabilities & 0x1)
4085 iwe.u.mode = IW_MODE_MASTER;
4087 iwe.u.mode = IW_MODE_ADHOC;
4088 current_ev = iwe_stream_add_event(info, current_ev, end_buf,
4089 &iwe, IW_EV_UINT_LEN);
4092 channel = bss->s.channel;
4093 if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
4095 iwe.cmd = SIOCGIWFREQ;
4096 iwe.u.freq.m = channel_frequency[channel-1] * 100000;
4098 current_ev = iwe_stream_add_event(info, current_ev, end_buf,
4099 &iwe, IW_EV_FREQ_LEN);
4102 /* Add quality statistics */
4104 iwe.u.qual.updated = 0x10; /* no link quality */
4105 iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95;
4106 iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95;
4107 /* Wireless tools prior to 27.pre22 will show link quality
4108 * anyway, so we provide a reasonable value. */
4109 if (iwe.u.qual.level > iwe.u.qual.noise)
4110 iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
4112 iwe.u.qual.qual = 0;
4113 current_ev = iwe_stream_add_event(info, current_ev, end_buf,
4114 &iwe, IW_EV_QUAL_LEN);
4116 /* Add encryption capability */
4117 iwe.cmd = SIOCGIWENCODE;
4118 if (capabilities & 0x10)
4119 iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
4121 iwe.u.data.flags = IW_ENCODE_DISABLED;
4122 iwe.u.data.length = 0;
4123 current_ev = iwe_stream_add_point(info, current_ev, end_buf,
4124 &iwe, bss->a.essid);
4126 /* Add EXTRA: Age to display seconds since last beacon/probe response
4127 * for given network. */
4128 iwe.cmd = IWEVCUSTOM;
4130 p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
4131 " Last beacon: %dms ago",
4132 jiffies_to_msecs(jiffies - last_scanned));
4133 iwe.u.data.length = p - custom;
4134 if (iwe.u.data.length)
4135 current_ev = iwe_stream_add_point(info, current_ev, end_buf,
4138 /* Bit rate is not available in Lucent/Agere firmwares */
4139 if (priv->firmware_type != FIRMWARE_TYPE_AGERE) {
4140 char *current_val = current_ev + iwe_stream_lcp_len(info);
4144 if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)
4149 iwe.cmd = SIOCGIWRATE;
4150 /* Those two flags are ignored... */
4151 iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
4153 for (i = 0; i < 10; i += step) {
4154 /* NULL terminated */
4155 if (bss->p.rates[i] == 0x0)
4157 /* Bit rate given in 500 kb/s units (+ 0x80) */
4158 iwe.u.bitrate.value = ((bss->p.rates[i] & 0x7f) * 500000);
4159 current_val = iwe_stream_add_value(info, current_ev,
4164 /* Check if we added any event */
4165 if ((current_val - current_ev) > iwe_stream_lcp_len(info))
4166 current_ev = current_val;
4172 /* Return results of a scan */
4173 static int orinoco_ioctl_getscan(struct net_device *dev,
4174 struct iw_request_info *info,
4175 struct iw_point *srq,
4178 struct orinoco_private *priv = netdev_priv(dev);
4181 unsigned long flags;
4182 char *current_ev = extra;
4184 if (orinoco_lock(priv, &flags) != 0)
4187 if (priv->scan_inprogress) {
4188 /* Important note : we don't want to block the caller
4189 * until results are ready for various reasons.
4190 * First, managing wait queues is complex and racy.
4191 * Second, we grab some rtnetlink lock before comming
4192 * here (in dev_ioctl()).
4193 * Third, we generate an Wireless Event, so the
4194 * caller can wait itself on that - Jean II */
4199 list_for_each_entry(bss, &priv->bss_list, list) {
4200 /* Translate to WE format this entry */
4201 current_ev = orinoco_translate_scan(dev, info, current_ev,
4202 extra + srq->length,
4206 /* Check if there is space for one more entry */
4207 if ((extra + srq->length - current_ev) <= IW_EV_ADDR_LEN) {
4208 /* Ask user space to try again with a bigger buffer */
4214 srq->length = (current_ev - extra);
4215 srq->flags = (__u16) priv->scan_mode;
4218 orinoco_unlock(priv, &flags);
4222 /* Commit handler, called after set operations */
4223 static int orinoco_ioctl_commit(struct net_device *dev,
4224 struct iw_request_info *info,
4228 struct orinoco_private *priv = netdev_priv(dev);
4229 struct hermes *hw = &priv->hw;
4230 unsigned long flags;
4236 if (priv->broken_disableport) {
4237 orinoco_reset(&priv->reset_work);
4241 if (orinoco_lock(priv, &flags) != 0)
4244 err = hermes_disable_port(hw, 0);
4246 printk(KERN_WARNING "%s: Unable to disable port "
4247 "while reconfiguring card\n", dev->name);
4248 priv->broken_disableport = 1;
4252 err = __orinoco_program_rids(dev);
4254 printk(KERN_WARNING "%s: Unable to reconfigure card\n",
4259 err = hermes_enable_port(hw, 0);
4261 printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
4268 printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
4269 schedule_work(&priv->reset_work);
4273 orinoco_unlock(priv, &flags);
4277 static const struct iw_priv_args orinoco_privtab[] = {
4278 { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
4279 { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
4280 { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
4282 { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
4284 { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
4285 0, "set_preamble" },
4286 { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
4288 { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
4289 0, "set_ibssport" },
4290 { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
4292 { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN,
4298 * Structures to export the Wireless Handlers
4301 static const iw_handler orinoco_handler[] = {
4302 [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit,
4303 [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname,
4304 [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq,
4305 [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq,
4306 [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode,
4307 [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode,
4308 [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens,
4309 [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens,
4310 [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange,
4311 [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy,
4312 [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy,
4313 [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy,
4314 [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy,
4315 [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap,
4316 [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap,
4317 [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan,
4318 [SIOCGIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan,
4319 [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid,
4320 [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid,
4321 [SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick,
4322 [SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick,
4323 [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate,
4324 [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate,
4325 [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts,
4326 [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts,
4327 [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag,
4328 [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag,
4329 [SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry,
4330 [SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode,
4331 [SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode,
4332 [SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower,
4333 [SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower,
4338 Added typecasting since we no longer use iwreq_data -- Moustafa
4340 static const iw_handler orinoco_private_handler[] = {
4341 [0] = (iw_handler) orinoco_ioctl_reset,
4342 [1] = (iw_handler) orinoco_ioctl_reset,
4343 [2] = (iw_handler) orinoco_ioctl_setport3,
4344 [3] = (iw_handler) orinoco_ioctl_getport3,
4345 [4] = (iw_handler) orinoco_ioctl_setpreamble,
4346 [5] = (iw_handler) orinoco_ioctl_getpreamble,
4347 [6] = (iw_handler) orinoco_ioctl_setibssport,
4348 [7] = (iw_handler) orinoco_ioctl_getibssport,
4349 [9] = (iw_handler) orinoco_ioctl_getrid,
4352 static const struct iw_handler_def orinoco_handler_def = {
4353 .num_standard = ARRAY_SIZE(orinoco_handler),
4354 .num_private = ARRAY_SIZE(orinoco_private_handler),
4355 .num_private_args = ARRAY_SIZE(orinoco_privtab),
4356 .standard = orinoco_handler,
4357 .private = orinoco_private_handler,
4358 .private_args = orinoco_privtab,
4359 .get_wireless_stats = orinoco_get_wireless_stats,
4362 static void orinoco_get_drvinfo(struct net_device *dev,
4363 struct ethtool_drvinfo *info)
4365 struct orinoco_private *priv = netdev_priv(dev);
4367 strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
4368 strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
4369 strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
4370 if (dev->dev.parent)
4371 strncpy(info->bus_info, dev->dev.parent->bus_id,
4372 sizeof(info->bus_info) - 1);
4374 snprintf(info->bus_info, sizeof(info->bus_info) - 1,
4375 "PCMCIA %p", priv->hw.iobase);
4378 static const struct ethtool_ops orinoco_ethtool_ops = {
4379 .get_drvinfo = orinoco_get_drvinfo,
4380 .get_link = ethtool_op_get_link,
4383 /********************************************************************/
4384 /* Module initialization */
4385 /********************************************************************/
4387 EXPORT_SYMBOL(alloc_orinocodev);
4388 EXPORT_SYMBOL(free_orinocodev);
4390 EXPORT_SYMBOL(__orinoco_up);
4391 EXPORT_SYMBOL(__orinoco_down);
4392 EXPORT_SYMBOL(orinoco_reinit_firmware);
4394 EXPORT_SYMBOL(orinoco_interrupt);
4396 /* Can't be declared "const" or the whole __initdata section will
4398 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
4399 " (David Gibson <hermes@gibson.dropbear.id.au>, "
4400 "Pavel Roskin <proski@gnu.org>, et al)";
4402 static int __init init_orinoco(void)
4404 printk(KERN_DEBUG "%s\n", version);
4408 static void __exit exit_orinoco(void)
4412 module_init(init_orinoco);
4413 module_exit(exit_orinoco);