git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/rt2x00/rt73usb.c

   1 /*
   2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt73usb
  23         Abstract: rt73usb device specific routines.
  24         Supported chipsets: rt2571W & rt2671.
  25  */
  26
  27 #include <linux/crc-itu-t.h>
  28 #include <linux/delay.h>
  29 #include <linux/etherdevice.h>
  30 #include <linux/init.h>
  31 #include <linux/kernel.h>
  32 #include <linux/module.h>
  33 #include <linux/usb.h>
  34
  35 #include "rt2x00.h"
  36 #include "rt2x00usb.h"
  37 #include "rt73usb.h"
  38
  39 /*
  40  * Allow hardware encryption to be disabled.
  41  */
  42 static int modparam_nohwcrypt = 0;
  43 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  44 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  45
  46 /*
  47  * Register access.
  48  * All access to the CSR registers will go through the methods
  49  * rt73usb_register_read and rt73usb_register_write.
  50  * BBP and RF register require indirect register access,
  51  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  52  * These indirect registers work with busy bits,
  53  * and we will try maximal REGISTER_BUSY_COUNT times to access
  54  * the register while taking a REGISTER_BUSY_DELAY us delay
  55  * between each attampt. When the busy bit is still set at that time,
  56  * the access attempt is considered to have failed,
  57  * and we will print an error.
  58  * The _lock versions must be used if you already hold the usb_cache_mutex
  59  */
  60 static inline void rt73usb_register_read(struct rt2x00_dev *rt2x00dev,
  61                                          const unsigned int offset, u32 *value)
  62 {
  63         __le32 reg;
  64         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  65                                       USB_VENDOR_REQUEST_IN, offset,
  66                                       &reg, sizeof(u32), REGISTER_TIMEOUT);
  67         *value = le32_to_cpu(reg);
  68 }
  69
  70 static inline void rt73usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
  71                                               const unsigned int offset, u32 *value)
  72 {
  73         __le32 reg;
  74         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
  75                                        USB_VENDOR_REQUEST_IN, offset,
  76                                        &reg, sizeof(u32), REGISTER_TIMEOUT);
  77         *value = le32_to_cpu(reg);
  78 }
  79
  80 static inline void rt73usb_register_multiread(struct rt2x00_dev *rt2x00dev,
  81                                               const unsigned int offset,
  82                                               void *value, const u32 length)
  83 {
  84         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  85                                       USB_VENDOR_REQUEST_IN, offset,
  86                                       value, length,
  87                                       REGISTER_TIMEOUT32(length));
  88 }
  89
  90 static inline void rt73usb_register_write(struct rt2x00_dev *rt2x00dev,
  91                                           const unsigned int offset, u32 value)
  92 {
  93         __le32 reg = cpu_to_le32(value);
  94         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
  95                                       USB_VENDOR_REQUEST_OUT, offset,
  96                                       &reg, sizeof(u32), REGISTER_TIMEOUT);
  97 }
  98
  99 static inline void rt73usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
 100                                                const unsigned int offset, u32 value)
 101 {
 102         __le32 reg = cpu_to_le32(value);
 103         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
 104                                        USB_VENDOR_REQUEST_OUT, offset,
 105                                       &reg, sizeof(u32), REGISTER_TIMEOUT);
 106 }
 107
 108 static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 109                                                const unsigned int offset,
 110                                                void *value, const u32 length)
 111 {
 112         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 113                                       USB_VENDOR_REQUEST_OUT, offset,
 114                                       value, length,
 115                                       REGISTER_TIMEOUT32(length));
 116 }
 117
 118 static u32 rt73usb_bbp_check(struct rt2x00_dev *rt2x00dev)
 119 {
 120         u32 reg;
 121         unsigned int i;
 122
 123         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 124                 rt73usb_register_read_lock(rt2x00dev, PHY_CSR3, &reg);
 125                 if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
 126                         break;
 127                 udelay(REGISTER_BUSY_DELAY);
 128         }
 129
 130         return reg;
 131 }
 132
 133 static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 134                               const unsigned int word, const u8 value)
 135 {
 136         u32 reg;
 137
 138         mutex_lock(&rt2x00dev->usb_cache_mutex);
 139
 140         /*
 141          * Wait until the BBP becomes ready.
 142          */
 143         reg = rt73usb_bbp_check(rt2x00dev);
 144         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
 145                 goto exit_fail;
 146
 147         /*
 148          * Write the data into the BBP.
 149          */
 150         reg = 0;
 151         rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
 152         rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
 153         rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
 154         rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
 155
 156         rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
 157         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 158
 159         return;
 160
 161 exit_fail:
 162         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 163
 164         ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
 165 }
 166
 167 static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 168                              const unsigned int word, u8 *value)
 169 {
 170         u32 reg;
 171
 172         mutex_lock(&rt2x00dev->usb_cache_mutex);
 173
 174         /*
 175          * Wait until the BBP becomes ready.
 176          */
 177         reg = rt73usb_bbp_check(rt2x00dev);
 178         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
 179                 goto exit_fail;
 180
 181         /*
 182          * Write the request into the BBP.
 183          */
 184         reg = 0;
 185         rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
 186         rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
 187         rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
 188
 189         rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
 190
 191         /*
 192          * Wait until the BBP becomes ready.
 193          */
 194         reg = rt73usb_bbp_check(rt2x00dev);
 195         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
 196                 goto exit_fail;
 197
 198         *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
 199         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 200
 201         return;
 202
 203 exit_fail:
 204         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 205
 206         ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
 207         *value = 0xff;
 208 }
 209
 210 static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
 211                              const unsigned int word, const u32 value)
 212 {
 213         u32 reg;
 214         unsigned int i;
 215
 216         if (!word)
 217                 return;
 218
 219         mutex_lock(&rt2x00dev->usb_cache_mutex);
 220
 221         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 222                 rt73usb_register_read_lock(rt2x00dev, PHY_CSR4, &reg);
 223                 if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
 224                         goto rf_write;
 225                 udelay(REGISTER_BUSY_DELAY);
 226         }
 227
 228         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 229         ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
 230         return;
 231
 232 rf_write:
 233         reg = 0;
 234         rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
 235
 236         /*
 237          * RF5225 and RF2527 contain 21 bits per RF register value,
 238          * all others contain 20 bits.
 239          */
 240         rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS,
 241                            20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
 242                                  rt2x00_rf(&rt2x00dev->chip, RF2527)));
 243         rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
 244         rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
 245
 246         rt73usb_register_write_lock(rt2x00dev, PHY_CSR4, reg);
 247         rt2x00_rf_write(rt2x00dev, word, value);
 248         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 249 }
 250
 251 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 252 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
 253
 254 static void rt73usb_read_csr(struct rt2x00_dev *rt2x00dev,
 255                              const unsigned int word, u32 *data)
 256 {
 257         rt73usb_register_read(rt2x00dev, CSR_OFFSET(word), data);
 258 }
 259
 260 static void rt73usb_write_csr(struct rt2x00_dev *rt2x00dev,
 261                               const unsigned int word, u32 data)
 262 {
 263         rt73usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
 264 }
 265
 266 static const struct rt2x00debug rt73usb_rt2x00debug = {
 267         .owner  = THIS_MODULE,
 268         .csr    = {
 269                 .read           = rt73usb_read_csr,
 270                 .write          = rt73usb_write_csr,
 271                 .word_size      = sizeof(u32),
 272                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 273         },
 274         .eeprom = {
 275                 .read           = rt2x00_eeprom_read,
 276                 .write          = rt2x00_eeprom_write,
 277                 .word_size      = sizeof(u16),
 278                 .word_count     = EEPROM_SIZE / sizeof(u16),
 279         },
 280         .bbp    = {
 281                 .read           = rt73usb_bbp_read,
 282                 .write          = rt73usb_bbp_write,
 283                 .word_size      = sizeof(u8),
 284                 .word_count     = BBP_SIZE / sizeof(u8),
 285         },
 286         .rf     = {
 287                 .read           = rt2x00_rf_read,
 288                 .write          = rt73usb_rf_write,
 289                 .word_size      = sizeof(u32),
 290                 .word_count     = RF_SIZE / sizeof(u32),
 291         },
 292 };
 293 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 294
 295 #ifdef CONFIG_RT73USB_LEDS
 296 static void rt73usb_brightness_set(struct led_classdev *led_cdev,
 297                                    enum led_brightness brightness)
 298 {
 299         struct rt2x00_led *led =
 300            container_of(led_cdev, struct rt2x00_led, led_dev);
 301         unsigned int enabled = brightness != LED_OFF;
 302         unsigned int a_mode =
 303             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
 304         unsigned int bg_mode =
 305             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
 306
 307         if (led->type == LED_TYPE_RADIO) {
 308                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 309                                    MCU_LEDCS_RADIO_STATUS, enabled);
 310
 311                 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
 312                                             0, led->rt2x00dev->led_mcu_reg,
 313                                             REGISTER_TIMEOUT);
 314         } else if (led->type == LED_TYPE_ASSOC) {
 315                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 316                                    MCU_LEDCS_LINK_BG_STATUS, bg_mode);
 317                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 318                                    MCU_LEDCS_LINK_A_STATUS, a_mode);
 319
 320                 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
 321                                             0, led->rt2x00dev->led_mcu_reg,
 322                                             REGISTER_TIMEOUT);
 323         } else if (led->type == LED_TYPE_QUALITY) {
 324                 /*
 325                  * The brightness is divided into 6 levels (0 - 5),
 326                  * this means we need to convert the brightness
 327                  * argument into the matching level within that range.
 328                  */
 329                 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
 330                                             brightness / (LED_FULL / 6),
 331                                             led->rt2x00dev->led_mcu_reg,
 332                                             REGISTER_TIMEOUT);
 333         }
 334 }
 335
 336 static int rt73usb_blink_set(struct led_classdev *led_cdev,
 337                              unsigned long *delay_on,
 338                              unsigned long *delay_off)
 339 {
 340         struct rt2x00_led *led =
 341             container_of(led_cdev, struct rt2x00_led, led_dev);
 342         u32 reg;
 343
 344         rt73usb_register_read(led->rt2x00dev, MAC_CSR14, &reg);
 345         rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, *delay_on);
 346         rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, *delay_off);
 347         rt73usb_register_write(led->rt2x00dev, MAC_CSR14, reg);
 348
 349         return 0;
 350 }
 351
 352 static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev,
 353                              struct rt2x00_led *led,
 354                              enum led_type type)
 355 {
 356         led->rt2x00dev = rt2x00dev;
 357         led->type = type;
 358         led->led_dev.brightness_set = rt73usb_brightness_set;
 359         led->led_dev.blink_set = rt73usb_blink_set;
 360         led->flags = LED_INITIALIZED;
 361 }
 362 #endif /* CONFIG_RT73USB_LEDS */
 363
 364 /*
 365  * Configuration handlers.
 366  */
 367 static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
 368                                      struct rt2x00lib_crypto *crypto,
 369                                      struct ieee80211_key_conf *key)
 370 {
 371         struct hw_key_entry key_entry;
 372         struct rt2x00_field32 field;
 373         int timeout;
 374         u32 mask;
 375         u32 reg;
 376
 377         if (crypto->cmd == SET_KEY) {
 378                 /*
 379                  * rt2x00lib can't determine the correct free
 380                  * key_idx for shared keys. We have 1 register
 381                  * with key valid bits. The goal is simple, read
 382                  * the register, if that is full we have no slots
 383                  * left.
 384                  * Note that each BSS is allowed to have up to 4
 385                  * shared keys, so put a mask over the allowed
 386                  * entries.
 387                  */
 388                 mask = (0xf << crypto->bssidx);
 389
 390                 rt73usb_register_read(rt2x00dev, SEC_CSR0, &reg);
 391                 reg &= mask;
 392
 393                 if (reg && reg == mask)
 394                         return -ENOSPC;
 395
 396                 key->hw_key_idx += reg ? (ffz(reg) - 1) : 0;
 397
 398                 /*
 399                  * Upload key to hardware
 400                  */
 401                 memcpy(key_entry.key, crypto->key,
 402                        sizeof(key_entry.key));
 403                 memcpy(key_entry.tx_mic, crypto->tx_mic,
 404                        sizeof(key_entry.tx_mic));
 405                 memcpy(key_entry.rx_mic, crypto->rx_mic,
 406                        sizeof(key_entry.rx_mic));
 407
 408                 reg = SHARED_KEY_ENTRY(key->hw_key_idx);
 409                 timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
 410                 rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
 411                                                     USB_VENDOR_REQUEST_OUT, reg,
 412                                                     &key_entry,
 413                                                     sizeof(key_entry),
 414                                                     timeout);
 415
 416                 /*
 417                  * The cipher types are stored over 2 registers.
 418                  * bssidx 0 and 1 keys are stored in SEC_CSR1 and
 419                  * bssidx 1 and 2 keys are stored in SEC_CSR5.
 420                  * Using the correct defines correctly will cause overhead,
 421                  * so just calculate the correct offset.
 422                  */
 423                 if (key->hw_key_idx < 8) {
 424                         field.bit_offset = (3 * key->hw_key_idx);
 425                         field.bit_mask = 0x7 << field.bit_offset;
 426
 427                         rt73usb_register_read(rt2x00dev, SEC_CSR1, &reg);
 428                         rt2x00_set_field32(&reg, field, crypto->cipher);
 429                         rt73usb_register_write(rt2x00dev, SEC_CSR1, reg);
 430                 } else {
 431                         field.bit_offset = (3 * (key->hw_key_idx - 8));
 432                         field.bit_mask = 0x7 << field.bit_offset;
 433
 434                         rt73usb_register_read(rt2x00dev, SEC_CSR5, &reg);
 435                         rt2x00_set_field32(&reg, field, crypto->cipher);
 436                         rt73usb_register_write(rt2x00dev, SEC_CSR5, reg);
 437                 }
 438
 439                 /*
 440                  * The driver does not support the IV/EIV generation
 441                  * in hardware. However it doesn't support the IV/EIV
 442                  * inside the ieee80211 frame either, but requires it
 443                  * to be provided seperately for the descriptor.
 444                  * rt2x00lib will cut the IV/EIV data out of all frames
 445                  * given to us by mac80211, but we must tell mac80211
 446                  * to generate the IV/EIV data.
 447                  */
 448                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 449         }
 450
 451         /*
 452          * SEC_CSR0 contains only single-bit fields to indicate
 453          * a particular key is valid. Because using the FIELD32()
 454          * defines directly will cause a lot of overhead we use
 455          * a calculation to determine the correct bit directly.
 456          */
 457         mask = 1 << key->hw_key_idx;
 458
 459         rt73usb_register_read(rt2x00dev, SEC_CSR0, &reg);
 460         if (crypto->cmd == SET_KEY)
 461                 reg |= mask;
 462         else if (crypto->cmd == DISABLE_KEY)
 463                 reg &= ~mask;
 464         rt73usb_register_write(rt2x00dev, SEC_CSR0, reg);
 465
 466         return 0;
 467 }
 468
 469 static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 470                                        struct rt2x00lib_crypto *crypto,
 471                                        struct ieee80211_key_conf *key)
 472 {
 473         struct hw_pairwise_ta_entry addr_entry;
 474         struct hw_key_entry key_entry;
 475         int timeout;
 476         u32 mask;
 477         u32 reg;
 478
 479         if (crypto->cmd == SET_KEY) {
 480                 /*
 481                  * rt2x00lib can't determine the correct free
 482                  * key_idx for pairwise keys. We have 2 registers
 483                  * with key valid bits. The goal is simple, read
 484                  * the first register, if that is full move to
 485                  * the next register.
 486                  * When both registers are full, we drop the key,
 487                  * otherwise we use the first invalid entry.
 488                  */
 489                 rt73usb_register_read(rt2x00dev, SEC_CSR2, &reg);
 490                 if (reg && reg == ~0) {
 491                         key->hw_key_idx = 32;
 492                         rt73usb_register_read(rt2x00dev, SEC_CSR3, &reg);
 493                         if (reg && reg == ~0)
 494                                 return -ENOSPC;
 495                 }
 496
 497                 key->hw_key_idx += reg ? (ffz(reg) - 1) : 0;
 498
 499                 /*
 500                  * Upload key to hardware
 501                  */
 502                 memcpy(key_entry.key, crypto->key,
 503                        sizeof(key_entry.key));
 504                 memcpy(key_entry.tx_mic, crypto->tx_mic,
 505                        sizeof(key_entry.tx_mic));
 506                 memcpy(key_entry.rx_mic, crypto->rx_mic,
 507                        sizeof(key_entry.rx_mic));
 508
 509                 reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
 510                 timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
 511                 rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
 512                                                     USB_VENDOR_REQUEST_OUT, reg,
 513                                                     &key_entry,
 514                                                     sizeof(key_entry),
 515                                                     timeout);
 516
 517                 /*
 518                  * Send the address and cipher type to the hardware register.
 519                  * This data fits within the CSR cache size, so we can use
 520                  * rt73usb_register_multiwrite() directly.
 521                  */
 522                 memset(&addr_entry, 0, sizeof(addr_entry));
 523                 memcpy(&addr_entry, crypto->address, ETH_ALEN);
 524                 addr_entry.cipher = crypto->cipher;
 525
 526                 reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
 527                 rt73usb_register_multiwrite(rt2x00dev, reg,
 528                                             &addr_entry, sizeof(addr_entry));
 529
 530                 /*
 531                  * Enable pairwise lookup table for given BSS idx,
 532                  * without this received frames will not be decrypted
 533                  * by the hardware.
 534                  */
 535                 rt73usb_register_read(rt2x00dev, SEC_CSR4, &reg);
 536                 reg |= (1 << crypto->bssidx);
 537                 rt73usb_register_write(rt2x00dev, SEC_CSR4, reg);
 538
 539                 /*
 540                  * The driver does not support the IV/EIV generation
 541                  * in hardware. However it doesn't support the IV/EIV
 542                  * inside the ieee80211 frame either, but requires it
 543                  * to be provided seperately for the descriptor.
 544                  * rt2x00lib will cut the IV/EIV data out of all frames
 545                  * given to us by mac80211, but we must tell mac80211
 546                  * to generate the IV/EIV data.
 547                  */
 548                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 549         }
 550
 551         /*
 552          * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
 553          * a particular key is valid. Because using the FIELD32()
 554          * defines directly will cause a lot of overhead we use
 555          * a calculation to determine the correct bit directly.
 556          */
 557         if (key->hw_key_idx < 32) {
 558                 mask = 1 << key->hw_key_idx;
 559
 560                 rt73usb_register_read(rt2x00dev, SEC_CSR2, &reg);
 561                 if (crypto->cmd == SET_KEY)
 562                         reg |= mask;
 563                 else if (crypto->cmd == DISABLE_KEY)
 564                         reg &= ~mask;
 565                 rt73usb_register_write(rt2x00dev, SEC_CSR2, reg);
 566         } else {
 567                 mask = 1 << (key->hw_key_idx - 32);
 568
 569                 rt73usb_register_read(rt2x00dev, SEC_CSR3, &reg);
 570                 if (crypto->cmd == SET_KEY)
 571                         reg |= mask;
 572                 else if (crypto->cmd == DISABLE_KEY)
 573                         reg &= ~mask;
 574                 rt73usb_register_write(rt2x00dev, SEC_CSR3, reg);
 575         }
 576
 577         return 0;
 578 }
 579
 580 static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev,
 581                                   const unsigned int filter_flags)
 582 {
 583         u32 reg;
 584
 585         /*
 586          * Start configuration steps.
 587          * Note that the version error will always be dropped
 588          * and broadcast frames will always be accepted since
 589          * there is no filter for it at this time.
 590          */
 591         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 592         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
 593                            !(filter_flags & FIF_FCSFAIL));
 594         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
 595                            !(filter_flags & FIF_PLCPFAIL));
 596         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
 597                            !(filter_flags & FIF_CONTROL));
 598         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
 599                            !(filter_flags & FIF_PROMISC_IN_BSS));
 600         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
 601                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 602                            !rt2x00dev->intf_ap_count);
 603         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
 604         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
 605                            !(filter_flags & FIF_ALLMULTI));
 606         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BROADCAST, 0);
 607         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS,
 608                            !(filter_flags & FIF_CONTROL));
 609         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 610 }
 611
 612 static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev,
 613                                 struct rt2x00_intf *intf,
 614                                 struct rt2x00intf_conf *conf,
 615                                 const unsigned int flags)
 616 {
 617         unsigned int beacon_base;
 618         u32 reg;
 619
 620         if (flags & CONFIG_UPDATE_TYPE) {
 621                 /*
 622                  * Clear current synchronisation setup.
 623                  * For the Beacon base registers we only need to clear
 624                  * the first byte since that byte contains the VALID and OWNER
 625                  * bits which (when set to 0) will invalidate the entire beacon.
 626                  */
 627                 beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
 628                 rt73usb_register_write(rt2x00dev, beacon_base, 0);
 629
 630                 /*
 631                  * Enable synchronisation.
 632                  */
 633                 rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
 634                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
 635                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
 636                 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
 637                 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
 638         }
 639
 640         if (flags & CONFIG_UPDATE_MAC) {
 641                 reg = le32_to_cpu(conf->mac[1]);
 642                 rt2x00_set_field32(&reg, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
 643                 conf->mac[1] = cpu_to_le32(reg);
 644
 645                 rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2,
 646                                             conf->mac, sizeof(conf->mac));
 647         }
 648
 649         if (flags & CONFIG_UPDATE_BSSID) {
 650                 reg = le32_to_cpu(conf->bssid[1]);
 651                 rt2x00_set_field32(&reg, MAC_CSR5_BSS_ID_MASK, 3);
 652                 conf->bssid[1] = cpu_to_le32(reg);
 653
 654                 rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4,
 655                                             conf->bssid, sizeof(conf->bssid));
 656         }
 657 }
 658
 659 static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
 660                                struct rt2x00lib_erp *erp)
 661 {
 662         u32 reg;
 663
 664         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 665         rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
 666         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 667
 668         rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
 669         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
 670                            !!erp->short_preamble);
 671         rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
 672 }
 673
 674 static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
 675                                     struct rt2x00lib_conf *libconf)
 676 {
 677         u16 eeprom;
 678         short lna_gain = 0;
 679
 680         if (libconf->band == IEEE80211_BAND_2GHZ) {
 681                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
 682                         lna_gain += 14;
 683
 684                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
 685                 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
 686         } else {
 687                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
 688                 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
 689         }
 690
 691         rt2x00dev->lna_gain = lna_gain;
 692 }
 693
 694 static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev,
 695                                    const int basic_rate_mask)
 696 {
 697         rt73usb_register_write(rt2x00dev, TXRX_CSR5, basic_rate_mask);
 698 }
 699
 700 static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
 701                                    struct rf_channel *rf, const int txpower)
 702 {
 703         u8 r3;
 704         u8 r94;
 705         u8 smart;
 706
 707         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 708         rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
 709
 710         smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
 711                   rt2x00_rf(&rt2x00dev->chip, RF2527));
 712
 713         rt73usb_bbp_read(rt2x00dev, 3, &r3);
 714         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
 715         rt73usb_bbp_write(rt2x00dev, 3, r3);
 716
 717         r94 = 6;
 718         if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
 719                 r94 += txpower - MAX_TXPOWER;
 720         else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
 721                 r94 += txpower;
 722         rt73usb_bbp_write(rt2x00dev, 94, r94);
 723
 724         rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
 725         rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
 726         rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 727         rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
 728
 729         rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
 730         rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
 731         rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
 732         rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
 733
 734         rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
 735         rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
 736         rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 737         rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
 738
 739         udelay(10);
 740 }
 741
 742 static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev,
 743                                    const int txpower)
 744 {
 745         struct rf_channel rf;
 746
 747         rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
 748         rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
 749         rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
 750         rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
 751
 752         rt73usb_config_channel(rt2x00dev, &rf, txpower);
 753 }
 754
 755 static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 756                                       struct antenna_setup *ant)
 757 {
 758         u8 r3;
 759         u8 r4;
 760         u8 r77;
 761         u8 temp;
 762
 763         rt73usb_bbp_read(rt2x00dev, 3, &r3);
 764         rt73usb_bbp_read(rt2x00dev, 4, &r4);
 765         rt73usb_bbp_read(rt2x00dev, 77, &r77);
 766
 767         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
 768
 769         /*
 770          * Configure the RX antenna.
 771          */
 772         switch (ant->rx) {
 773         case ANTENNA_HW_DIVERSITY:
 774                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 775                 temp = !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)
 776                        && (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ);
 777                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
 778                 break;
 779         case ANTENNA_A:
 780                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 781                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 782                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 783                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 784                 else
 785                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 786                 break;
 787         case ANTENNA_B:
 788         default:
 789                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 790                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 791                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 792                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 793                 else
 794                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 795                 break;
 796         }
 797
 798         rt73usb_bbp_write(rt2x00dev, 77, r77);
 799         rt73usb_bbp_write(rt2x00dev, 3, r3);
 800         rt73usb_bbp_write(rt2x00dev, 4, r4);
 801 }
 802
 803 static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
 804                                       struct antenna_setup *ant)
 805 {
 806         u8 r3;
 807         u8 r4;
 808         u8 r77;
 809
 810         rt73usb_bbp_read(rt2x00dev, 3, &r3);
 811         rt73usb_bbp_read(rt2x00dev, 4, &r4);
 812         rt73usb_bbp_read(rt2x00dev, 77, &r77);
 813
 814         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
 815         rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
 816                           !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
 817
 818         /*
 819          * Configure the RX antenna.
 820          */
 821         switch (ant->rx) {
 822         case ANTENNA_HW_DIVERSITY:
 823                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 824                 break;
 825         case ANTENNA_A:
 826                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 827                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 828                 break;
 829         case ANTENNA_B:
 830         default:
 831                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 832                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 833                 break;
 834         }
 835
 836         rt73usb_bbp_write(rt2x00dev, 77, r77);
 837         rt73usb_bbp_write(rt2x00dev, 3, r3);
 838         rt73usb_bbp_write(rt2x00dev, 4, r4);
 839 }
 840
 841 struct antenna_sel {
 842         u8 word;
 843         /*
 844          * value[0] -> non-LNA
 845          * value[1] -> LNA
 846          */
 847         u8 value[2];
 848 };
 849
 850 static const struct antenna_sel antenna_sel_a[] = {
 851         { 96,  { 0x58, 0x78 } },
 852         { 104, { 0x38, 0x48 } },
 853         { 75,  { 0xfe, 0x80 } },
 854         { 86,  { 0xfe, 0x80 } },
 855         { 88,  { 0xfe, 0x80 } },
 856         { 35,  { 0x60, 0x60 } },
 857         { 97,  { 0x58, 0x58 } },
 858         { 98,  { 0x58, 0x58 } },
 859 };
 860
 861 static const struct antenna_sel antenna_sel_bg[] = {
 862         { 96,  { 0x48, 0x68 } },
 863         { 104, { 0x2c, 0x3c } },
 864         { 75,  { 0xfe, 0x80 } },
 865         { 86,  { 0xfe, 0x80 } },
 866         { 88,  { 0xfe, 0x80 } },
 867         { 35,  { 0x50, 0x50 } },
 868         { 97,  { 0x48, 0x48 } },
 869         { 98,  { 0x48, 0x48 } },
 870 };
 871
 872 static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
 873                                    struct antenna_setup *ant)
 874 {
 875         const struct antenna_sel *sel;
 876         unsigned int lna;
 877         unsigned int i;
 878         u32 reg;
 879
 880         /*
 881          * We should never come here because rt2x00lib is supposed
 882          * to catch this and send us the correct antenna explicitely.
 883          */
 884         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 885                ant->tx == ANTENNA_SW_DIVERSITY);
 886
 887         if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
 888                 sel = antenna_sel_a;
 889                 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
 890         } else {
 891                 sel = antenna_sel_bg;
 892                 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
 893         }
 894
 895         for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
 896                 rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
 897
 898         rt73usb_register_read(rt2x00dev, PHY_CSR0, &reg);
 899
 900         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
 901                            (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ));
 902         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
 903                            (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ));
 904
 905         rt73usb_register_write(rt2x00dev, PHY_CSR0, reg);
 906
 907         if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
 908             rt2x00_rf(&rt2x00dev->chip, RF5225))
 909                 rt73usb_config_antenna_5x(rt2x00dev, ant);
 910         else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
 911                  rt2x00_rf(&rt2x00dev->chip, RF2527))
 912                 rt73usb_config_antenna_2x(rt2x00dev, ant);
 913 }
 914
 915 static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
 916                                     struct rt2x00lib_conf *libconf)
 917 {
 918         u32 reg;
 919
 920         rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
 921         rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, libconf->slot_time);
 922         rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
 923
 924         rt73usb_register_read(rt2x00dev, MAC_CSR8, &reg);
 925         rt2x00_set_field32(&reg, MAC_CSR8_SIFS, libconf->sifs);
 926         rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
 927         rt2x00_set_field32(&reg, MAC_CSR8_EIFS, libconf->eifs);
 928         rt73usb_register_write(rt2x00dev, MAC_CSR8, reg);
 929
 930         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 931         rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 932         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 933
 934         rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
 935         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
 936         rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
 937
 938         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
 939         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
 940                            libconf->conf->beacon_int * 16);
 941         rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
 942 }
 943
 944 static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
 945                            struct rt2x00lib_conf *libconf,
 946                            const unsigned int flags)
 947 {
 948         /* Always recalculate LNA gain before changing configuration */
 949         rt73usb_config_lna_gain(rt2x00dev, libconf);
 950
 951         if (flags & CONFIG_UPDATE_PHYMODE)
 952                 rt73usb_config_phymode(rt2x00dev, libconf->basic_rates);
 953         if (flags & CONFIG_UPDATE_CHANNEL)
 954                 rt73usb_config_channel(rt2x00dev, &libconf->rf,
 955                                        libconf->conf->power_level);
 956         if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
 957                 rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level);
 958         if (flags & CONFIG_UPDATE_ANTENNA)
 959                 rt73usb_config_antenna(rt2x00dev, &libconf->ant);
 960         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
 961                 rt73usb_config_duration(rt2x00dev, libconf);
 962 }
 963
 964 /*
 965  * Link tuning
 966  */
 967 static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev,
 968                                struct link_qual *qual)
 969 {
 970         u32 reg;
 971
 972         /*
 973          * Update FCS error count from register.
 974          */
 975         rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
 976         qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
 977
 978         /*
 979          * Update False CCA count from register.
 980          */
 981         rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
 982         qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
 983 }
 984
 985 static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
 986 {
 987         rt73usb_bbp_write(rt2x00dev, 17, 0x20);
 988         rt2x00dev->link.vgc_level = 0x20;
 989 }
 990
 991 static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev)
 992 {
 993         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
 994         u8 r17;
 995         u8 up_bound;
 996         u8 low_bound;
 997
 998         rt73usb_bbp_read(rt2x00dev, 17, &r17);
 999
1000         /*
1001          * Determine r17 bounds.
1002          */
1003         if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
1004                 low_bound = 0x28;
1005                 up_bound = 0x48;
1006
1007                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
1008                         low_bound += 0x10;
1009                         up_bound += 0x10;
1010                 }
1011         } else {
1012                 if (rssi > -82) {
1013                         low_bound = 0x1c;
1014                         up_bound = 0x40;
1015                 } else if (rssi > -84) {
1016                         low_bound = 0x1c;
1017                         up_bound = 0x20;
1018                 } else {
1019                         low_bound = 0x1c;
1020                         up_bound = 0x1c;
1021                 }
1022
1023                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
1024                         low_bound += 0x14;
1025                         up_bound += 0x10;
1026                 }
1027         }
1028
1029         /*
1030          * If we are not associated, we should go straight to the
1031          * dynamic CCA tuning.
1032          */
1033         if (!rt2x00dev->intf_associated)
1034                 goto dynamic_cca_tune;
1035
1036         /*
1037          * Special big-R17 for very short distance
1038          */
1039         if (rssi > -35) {
1040                 if (r17 != 0x60)
1041                         rt73usb_bbp_write(rt2x00dev, 17, 0x60);
1042                 return;
1043         }
1044
1045         /*
1046          * Special big-R17 for short distance
1047          */
1048         if (rssi >= -58) {
1049                 if (r17 != up_bound)
1050                         rt73usb_bbp_write(rt2x00dev, 17, up_bound);
1051                 return;
1052         }
1053
1054         /*
1055          * Special big-R17 for middle-short distance
1056          */
1057         if (rssi >= -66) {
1058                 low_bound += 0x10;
1059                 if (r17 != low_bound)
1060                         rt73usb_bbp_write(rt2x00dev, 17, low_bound);
1061                 return;
1062         }
1063
1064         /*
1065          * Special mid-R17 for middle distance
1066          */
1067         if (rssi >= -74) {
1068                 if (r17 != (low_bound + 0x10))
1069                         rt73usb_bbp_write(rt2x00dev, 17, low_bound + 0x08);
1070                 return;
1071         }
1072
1073         /*
1074          * Special case: Change up_bound based on the rssi.
1075          * Lower up_bound when rssi is weaker then -74 dBm.
1076          */
1077         up_bound -= 2 * (-74 - rssi);
1078         if (low_bound > up_bound)
1079                 up_bound = low_bound;
1080
1081         if (r17 > up_bound) {
1082                 rt73usb_bbp_write(rt2x00dev, 17, up_bound);
1083                 return;
1084         }
1085
1086 dynamic_cca_tune:
1087
1088         /*
1089          * r17 does not yet exceed upper limit, continue and base
1090          * the r17 tuning on the false CCA count.
1091          */
1092         if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
1093                 r17 += 4;
1094                 if (r17 > up_bound)
1095                         r17 = up_bound;
1096                 rt73usb_bbp_write(rt2x00dev, 17, r17);
1097         } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
1098                 r17 -= 4;
1099                 if (r17 < low_bound)
1100                         r17 = low_bound;
1101                 rt73usb_bbp_write(rt2x00dev, 17, r17);
1102         }
1103 }
1104
1105 /*
1106  * Firmware functions
1107  */
1108 static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
1109 {
1110         return FIRMWARE_RT2571;
1111 }
1112
1113 static u16 rt73usb_get_firmware_crc(const void *data, const size_t len)
1114 {
1115         u16 crc;
1116
1117         /*
1118          * Use the crc itu-t algorithm.
1119          * The last 2 bytes in the firmware array are the crc checksum itself,
1120          * this means that we should never pass those 2 bytes to the crc
1121          * algorithm.
1122          */
1123         crc = crc_itu_t(0, data, len - 2);
1124         crc = crc_itu_t_byte(crc, 0);
1125         crc = crc_itu_t_byte(crc, 0);
1126
1127         return crc;
1128 }
1129
1130 static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
1131                                  const size_t len)
1132 {
1133         unsigned int i;
1134         int status;
1135         u32 reg;
1136
1137         /*
1138          * Wait for stable hardware.
1139          */
1140         for (i = 0; i < 100; i++) {
1141                 rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1142                 if (reg)
1143                         break;
1144                 msleep(1);
1145         }
1146
1147         if (!reg) {
1148                 ERROR(rt2x00dev, "Unstable hardware.\n");
1149                 return -EBUSY;
1150         }
1151
1152         /*
1153          * Write firmware to device.
1154          */
1155         rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
1156                                             USB_VENDOR_REQUEST_OUT,
1157                                             FIRMWARE_IMAGE_BASE,
1158                                             data, len,
1159                                             REGISTER_TIMEOUT32(len));
1160
1161         /*
1162          * Send firmware request to device to load firmware,
1163          * we need to specify a long timeout time.
1164          */
1165         status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
1166                                              0, USB_MODE_FIRMWARE,
1167                                              REGISTER_TIMEOUT_FIRMWARE);
1168         if (status < 0) {
1169                 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
1170                 return status;
1171         }
1172
1173         return 0;
1174 }
1175
1176 /*
1177  * Initialization functions.
1178  */
1179 static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
1180 {
1181         u32 reg;
1182
1183         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
1184         rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
1185         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
1186         rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
1187         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1188
1189         rt73usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
1190         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
1191         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
1192         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
1193         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
1194         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
1195         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
1196         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
1197         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
1198         rt73usb_register_write(rt2x00dev, TXRX_CSR1, reg);
1199
1200         /*
1201          * CCK TXD BBP registers
1202          */
1203         rt73usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
1204         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
1205         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
1206         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
1207         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
1208         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
1209         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
1210         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
1211         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
1212         rt73usb_register_write(rt2x00dev, TXRX_CSR2, reg);
1213
1214         /*
1215          * OFDM TXD BBP registers
1216          */
1217         rt73usb_register_read(rt2x00dev, TXRX_CSR3, &reg);
1218         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
1219         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
1220         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
1221         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
1222         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
1223         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
1224         rt73usb_register_write(rt2x00dev, TXRX_CSR3, reg);
1225
1226         rt73usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
1227         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
1228         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
1229         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
1230         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
1231         rt73usb_register_write(rt2x00dev, TXRX_CSR7, reg);
1232
1233         rt73usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
1234         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
1235         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
1236         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
1237         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
1238         rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg);
1239
1240         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
1241         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
1242         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
1243         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
1244         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
1245         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
1246         rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
1247         rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1248
1249         rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
1250
1251         rt73usb_register_read(rt2x00dev, MAC_CSR6, &reg);
1252         rt2x00_set_field32(&reg, MAC_CSR6_MAX_FRAME_UNIT, 0xfff);
1253         rt73usb_register_write(rt2x00dev, MAC_CSR6, reg);
1254
1255         rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718);
1256
1257         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1258                 return -EBUSY;
1259
1260         rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00);
1261
1262         /*
1263          * Invalidate all Shared Keys (SEC_CSR0),
1264          * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1265          */
1266         rt73usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1267         rt73usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1268         rt73usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
1269
1270         reg = 0x000023b0;
1271         if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1272             rt2x00_rf(&rt2x00dev->chip, RF2527))
1273                 rt2x00_set_field32(&reg, PHY_CSR1_RF_RPI, 1);
1274         rt73usb_register_write(rt2x00dev, PHY_CSR1, reg);
1275
1276         rt73usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06);
1277         rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1278         rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
1279
1280         rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
1281         rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
1282         rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
1283
1284         /*
1285          * Clear all beacons
1286          * For the Beacon base registers we only need to clear
1287          * the first byte since that byte contains the VALID and OWNER
1288          * bits which (when set to 0) will invalidate the entire beacon.
1289          */
1290         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
1291         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
1292         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
1293         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
1294
1295         /*
1296          * We must clear the error counters.
1297          * These registers are cleared on read,
1298          * so we may pass a useless variable to store the value.
1299          */
1300         rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
1301         rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
1302         rt73usb_register_read(rt2x00dev, STA_CSR2, &reg);
1303
1304         /*
1305          * Reset MAC and BBP registers.
1306          */
1307         rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1308         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1309         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1310         rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1311
1312         rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1313         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1314         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1315         rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1316
1317         rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1318         rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1319         rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1320
1321         return 0;
1322 }
1323
1324 static int rt73usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
1325 {
1326         unsigned int i;
1327         u8 value;
1328
1329         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1330                 rt73usb_bbp_read(rt2x00dev, 0, &value);
1331                 if ((value != 0xff) && (value != 0x00))
1332                         return 0;
1333                 udelay(REGISTER_BUSY_DELAY);
1334         }
1335
1336         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1337         return -EACCES;
1338 }
1339
1340 static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
1341 {
1342         unsigned int i;
1343         u16 eeprom;
1344         u8 reg_id;
1345         u8 value;
1346
1347         if (unlikely(rt73usb_wait_bbp_ready(rt2x00dev)))
1348                 return -EACCES;
1349
1350         rt73usb_bbp_write(rt2x00dev, 3, 0x80);
1351         rt73usb_bbp_write(rt2x00dev, 15, 0x30);
1352         rt73usb_bbp_write(rt2x00dev, 21, 0xc8);
1353         rt73usb_bbp_write(rt2x00dev, 22, 0x38);
1354         rt73usb_bbp_write(rt2x00dev, 23, 0x06);
1355         rt73usb_bbp_write(rt2x00dev, 24, 0xfe);
1356         rt73usb_bbp_write(rt2x00dev, 25, 0x0a);
1357         rt73usb_bbp_write(rt2x00dev, 26, 0x0d);
1358         rt73usb_bbp_write(rt2x00dev, 32, 0x0b);
1359         rt73usb_bbp_write(rt2x00dev, 34, 0x12);
1360         rt73usb_bbp_write(rt2x00dev, 37, 0x07);
1361         rt73usb_bbp_write(rt2x00dev, 39, 0xf8);
1362         rt73usb_bbp_write(rt2x00dev, 41, 0x60);
1363         rt73usb_bbp_write(rt2x00dev, 53, 0x10);
1364         rt73usb_bbp_write(rt2x00dev, 54, 0x18);
1365         rt73usb_bbp_write(rt2x00dev, 60, 0x10);
1366         rt73usb_bbp_write(rt2x00dev, 61, 0x04);
1367         rt73usb_bbp_write(rt2x00dev, 62, 0x04);
1368         rt73usb_bbp_write(rt2x00dev, 75, 0xfe);
1369         rt73usb_bbp_write(rt2x00dev, 86, 0xfe);
1370         rt73usb_bbp_write(rt2x00dev, 88, 0xfe);
1371         rt73usb_bbp_write(rt2x00dev, 90, 0x0f);
1372         rt73usb_bbp_write(rt2x00dev, 99, 0x00);
1373         rt73usb_bbp_write(rt2x00dev, 102, 0x16);
1374         rt73usb_bbp_write(rt2x00dev, 107, 0x04);
1375
1376         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1377                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1378
1379                 if (eeprom != 0xffff && eeprom != 0x0000) {
1380                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1381                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1382                         rt73usb_bbp_write(rt2x00dev, reg_id, value);
1383                 }
1384         }
1385
1386         return 0;
1387 }
1388
1389 /*
1390  * Device state switch handlers.
1391  */
1392 static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
1393                               enum dev_state state)
1394 {
1395         u32 reg;
1396
1397         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
1398         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
1399                            (state == STATE_RADIO_RX_OFF) ||
1400                            (state == STATE_RADIO_RX_OFF_LINK));
1401         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1402 }
1403
1404 static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
1405 {
1406         /*
1407          * Initialize all registers.
1408          */
1409         if (unlikely(rt73usb_init_registers(rt2x00dev) ||
1410                      rt73usb_init_bbp(rt2x00dev)))
1411                 return -EIO;
1412
1413         return 0;
1414 }
1415
1416 static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
1417 {
1418         rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1419
1420         /*
1421          * Disable synchronisation.
1422          */
1423         rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0);
1424
1425         rt2x00usb_disable_radio(rt2x00dev);
1426 }
1427
1428 static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1429 {
1430         u32 reg;
1431         unsigned int i;
1432         char put_to_sleep;
1433
1434         put_to_sleep = (state != STATE_AWAKE);
1435
1436         rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1437         rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1438         rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1439         rt73usb_register_write(rt2x00dev, MAC_CSR12, reg);
1440
1441         /*
1442          * Device is not guaranteed to be in the requested state yet.
1443          * We must wait until the register indicates that the
1444          * device has entered the correct state.
1445          */
1446         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1447                 rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1448                 state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1449                 if (state == !put_to_sleep)
1450                         return 0;
1451                 msleep(10);
1452         }
1453
1454         return -EBUSY;
1455 }
1456
1457 static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1458                                     enum dev_state state)
1459 {
1460         int retval = 0;
1461
1462         switch (state) {
1463         case STATE_RADIO_ON:
1464                 retval = rt73usb_enable_radio(rt2x00dev);
1465                 break;
1466         case STATE_RADIO_OFF:
1467                 rt73usb_disable_radio(rt2x00dev);
1468                 break;
1469         case STATE_RADIO_RX_ON:
1470         case STATE_RADIO_RX_ON_LINK:
1471         case STATE_RADIO_RX_OFF:
1472         case STATE_RADIO_RX_OFF_LINK:
1473                 rt73usb_toggle_rx(rt2x00dev, state);
1474                 break;
1475         case STATE_RADIO_IRQ_ON:
1476         case STATE_RADIO_IRQ_OFF:
1477                 /* No support, but no error either */
1478                 break;
1479         case STATE_DEEP_SLEEP:
1480         case STATE_SLEEP:
1481         case STATE_STANDBY:
1482         case STATE_AWAKE:
1483                 retval = rt73usb_set_state(rt2x00dev, state);
1484                 break;
1485         default:
1486                 retval = -ENOTSUPP;
1487                 break;
1488         }
1489
1490         if (unlikely(retval))
1491                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1492                       state, retval);
1493
1494         return retval;
1495 }
1496
1497 /*
1498  * TX descriptor initialization
1499  */
1500 static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1501                                   struct sk_buff *skb,
1502                                   struct txentry_desc *txdesc)
1503 {
1504         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1505         __le32 *txd = skbdesc->desc;
1506         u32 word;
1507
1508         /*
1509          * Start writing the descriptor words.
1510          */
1511         rt2x00_desc_read(txd, 1, &word);
1512         rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
1513         rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
1514         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1515         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
1516         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
1517         rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
1518                            test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
1519         rt2x00_desc_write(txd, 1, word);
1520
1521         rt2x00_desc_read(txd, 2, &word);
1522         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1523         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1524         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1525         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
1526         rt2x00_desc_write(txd, 2, word);
1527
1528         if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
1529                 _rt2x00_desc_write(txd, 3, skbdesc->iv);
1530                 _rt2x00_desc_write(txd, 4, skbdesc->eiv);
1531         }
1532
1533         rt2x00_desc_read(txd, 5, &word);
1534         rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1535                            TXPOWER_TO_DEV(rt2x00dev->tx_power));
1536         rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1537         rt2x00_desc_write(txd, 5, word);
1538
1539         rt2x00_desc_read(txd, 0, &word);
1540         rt2x00_set_field32(&word, TXD_W0_BURST,
1541                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
1542         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1543         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1544                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1545         rt2x00_set_field32(&word, TXD_W0_ACK,
1546                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1547         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1548                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1549         rt2x00_set_field32(&word, TXD_W0_OFDM,
1550                            test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
1551         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1552         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1553                            test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
1554         rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
1555                            test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
1556         rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
1557                            test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
1558         rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
1559         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
1560                            skb->len - skbdesc->desc_len);
1561         rt2x00_set_field32(&word, TXD_W0_BURST2,
1562                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
1563         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
1564         rt2x00_desc_write(txd, 0, word);
1565 }
1566
1567 /*
1568  * TX data initialization
1569  */
1570 static void rt73usb_write_beacon(struct queue_entry *entry)
1571 {
1572         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1573         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1574         unsigned int beacon_base;
1575         u32 reg;
1576         u32 word, len;
1577
1578         /*
1579          * Add the descriptor in front of the skb.
1580          */
1581         skb_push(entry->skb, entry->queue->desc_size);
1582         memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
1583         skbdesc->desc = entry->skb->data;
1584
1585         /*
1586          * Adjust the beacon databyte count. The current number is
1587          * calculated before this function gets called, but falsely
1588          * assumes that the descriptor was already present in the SKB.
1589          */
1590         rt2x00_desc_read(skbdesc->desc, 0, &word);
1591         len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
1592         len += skbdesc->desc_len;
1593         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
1594         rt2x00_desc_write(skbdesc->desc, 0, word);
1595
1596         /*
1597          * Disable beaconing while we are reloading the beacon data,
1598          * otherwise we might be sending out invalid data.
1599          */
1600         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
1601         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
1602         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
1603         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
1604         rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1605
1606         /*
1607          * Write entire beacon with descriptor to register.
1608          */
1609         beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
1610         rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
1611                                             USB_VENDOR_REQUEST_OUT, beacon_base,
1612                                             entry->skb->data, entry->skb->len,
1613                                             REGISTER_TIMEOUT32(entry->skb->len));
1614
1615         /*
1616          * Clean up the beacon skb.
1617          */
1618         dev_kfree_skb(entry->skb);
1619         entry->skb = NULL;
1620 }
1621
1622 static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
1623                                    struct sk_buff *skb)
1624 {
1625         int length;
1626
1627         /*
1628          * The length _must_ be a multiple of 4,
1629          * but it must _not_ be a multiple of the USB packet size.
1630          */
1631         length = roundup(skb->len, 4);
1632         length += (4 * !(length % rt2x00dev->usb_maxpacket));
1633
1634         return length;
1635 }
1636
1637 static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1638                                   const enum data_queue_qid queue)
1639 {
1640         u32 reg;
1641
1642         if (queue != QID_BEACON) {
1643                 rt2x00usb_kick_tx_queue(rt2x00dev, queue);
1644                 return;
1645         }
1646
1647         /*
1648          * For Wi-Fi faily generated beacons between participating stations.
1649          * Set TBTT phase adaptive adjustment step to 8us (default 16us)
1650          */
1651         rt73usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1652
1653         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
1654         if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
1655                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
1656                 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
1657                 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
1658                 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1659         }
1660 }
1661
1662 /*
1663  * RX control handlers
1664  */
1665 static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1666 {
1667         u8 offset = rt2x00dev->lna_gain;
1668         u8 lna;
1669
1670         lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1671         switch (lna) {
1672         case 3:
1673                 offset += 90;
1674                 break;
1675         case 2:
1676                 offset += 74;
1677                 break;
1678         case 1:
1679                 offset += 64;
1680                 break;
1681         default:
1682                 return 0;
1683         }
1684
1685         if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
1686                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
1687                         if (lna == 3 || lna == 2)
1688                                 offset += 10;
1689                 } else {
1690                         if (lna == 3)
1691                                 offset += 6;
1692                         else if (lna == 2)
1693                                 offset += 8;
1694                 }
1695         }
1696
1697         return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1698 }
1699
1700 static void rt73usb_fill_rxdone(struct queue_entry *entry,
1701                                 struct rxdone_entry_desc *rxdesc)
1702 {
1703         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1704         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1705         __le32 *rxd = (__le32 *)entry->skb->data;
1706         u32 word0;
1707         u32 word1;
1708
1709         /*
1710          * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
1711          * frame data in rt2x00usb.
1712          */
1713         memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
1714         rxd = (__le32 *)skbdesc->desc;
1715
1716         /*
1717          * It is now safe to read the descriptor on all architectures.
1718          */
1719         rt2x00_desc_read(rxd, 0, &word0);
1720         rt2x00_desc_read(rxd, 1, &word1);
1721
1722         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1723                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1724
1725         if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
1726                 rxdesc->cipher =
1727                     rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
1728                 rxdesc->cipher_status =
1729                     rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
1730         }
1731
1732         if (rxdesc->cipher != CIPHER_NONE) {
1733                 _rt2x00_desc_read(rxd, 2, &rxdesc->iv);
1734                 _rt2x00_desc_read(rxd, 3, &rxdesc->eiv);
1735                 _rt2x00_desc_read(rxd, 4, &rxdesc->icv);
1736
1737                 /*
1738                  * Hardware has stripped IV/EIV data from 802.11 frame during
1739                  * decryption. It has provided the data seperately but rt2x00lib
1740                  * should decide if it should be reinserted.
1741                  */
1742                 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
1743
1744                 /*
1745                  * FIXME: Legacy driver indicates that the frame does
1746                  * contain the Michael Mic. Unfortunately, in rt2x00
1747                  * the MIC seems to be missing completely...
1748                  */
1749                 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
1750
1751                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
1752                         rxdesc->flags |= RX_FLAG_DECRYPTED;
1753                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
1754                         rxdesc->flags |= RX_FLAG_MMIC_ERROR;
1755         }
1756
1757         /*
1758          * Obtain the status about this packet.
1759          * When frame was received with an OFDM bitrate,
1760          * the signal is the PLCP value. If it was received with
1761          * a CCK bitrate the signal is the rate in 100kbit/s.
1762          */
1763         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1764         rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1);
1765         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1766
1767         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1768                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1769         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1770                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1771
1772         /*
1773          * Set skb pointers, and update frame information.
1774          */
1775         skb_pull(entry->skb, entry->queue->desc_size);
1776         skb_trim(entry->skb, rxdesc->size);
1777 }
1778
1779 /*
1780  * Device probe functions.
1781  */
1782 static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1783 {
1784         u16 word;
1785         u8 *mac;
1786         s8 value;
1787
1788         rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1789
1790         /*
1791          * Start validation of the data that has been read.
1792          */
1793         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1794         if (!is_valid_ether_addr(mac)) {
1795                 DECLARE_MAC_BUF(macbuf);
1796
1797                 random_ether_addr(mac);
1798                 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
1799         }
1800
1801         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1802         if (word == 0xffff) {
1803                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1804                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1805                                    ANTENNA_B);
1806                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1807                                    ANTENNA_B);
1808                 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
1809                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1810                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1811                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226);
1812                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1813                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1814         }
1815
1816         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1817         if (word == 0xffff) {
1818                 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0);
1819                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1820                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1821         }
1822
1823         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
1824         if (word == 0xffff) {
1825                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0);
1826                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0);
1827                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0);
1828                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0);
1829                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0);
1830                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0);
1831                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0);
1832                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0);
1833                 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
1834                                    LED_MODE_DEFAULT);
1835                 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
1836                 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
1837         }
1838
1839         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
1840         if (word == 0xffff) {
1841                 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
1842                 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
1843                 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
1844                 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
1845         }
1846
1847         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
1848         if (word == 0xffff) {
1849                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1850                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1851                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1852                 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1853         } else {
1854                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
1855                 if (value < -10 || value > 10)
1856                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1857                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
1858                 if (value < -10 || value > 10)
1859                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1860                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1861         }
1862
1863         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
1864         if (word == 0xffff) {
1865                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1866                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1867                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1868                 EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
1869         } else {
1870                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
1871                 if (value < -10 || value > 10)
1872                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1873                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
1874                 if (value < -10 || value > 10)
1875                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1876                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1877         }
1878
1879         return 0;
1880 }
1881
1882 static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1883 {
1884         u32 reg;
1885         u16 value;
1886         u16 eeprom;
1887
1888         /*
1889          * Read EEPROM word for configuration.
1890          */
1891         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1892
1893         /*
1894          * Identify RF chipset.
1895          */
1896         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1897         rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1898         rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
1899
1900         if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) {
1901                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1902                 return -ENODEV;
1903         }
1904
1905         if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
1906             !rt2x00_rf(&rt2x00dev->chip, RF2528) &&
1907             !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
1908             !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1909                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1910                 return -ENODEV;
1911         }
1912
1913         /*
1914          * Identify default antenna configuration.
1915          */
1916         rt2x00dev->default_ant.tx =
1917             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1918         rt2x00dev->default_ant.rx =
1919             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1920
1921         /*
1922          * Read the Frame type.
1923          */
1924         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
1925                 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
1926
1927         /*
1928          * Read frequency offset.
1929          */
1930         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1931         rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
1932
1933         /*
1934          * Read external LNA informations.
1935          */
1936         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1937
1938         if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) {
1939                 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
1940                 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
1941         }
1942
1943         /*
1944          * Store led settings, for correct led behaviour.
1945          */
1946 #ifdef CONFIG_RT73USB_LEDS
1947         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
1948
1949         rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
1950         rt73usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
1951         if (value == LED_MODE_SIGNAL_STRENGTH)
1952                 rt73usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
1953                                  LED_TYPE_QUALITY);
1954
1955         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
1956         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
1957                            rt2x00_get_field16(eeprom,
1958                                               EEPROM_LED_POLARITY_GPIO_0));
1959         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
1960                            rt2x00_get_field16(eeprom,
1961                                               EEPROM_LED_POLARITY_GPIO_1));
1962         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
1963                            rt2x00_get_field16(eeprom,
1964                                               EEPROM_LED_POLARITY_GPIO_2));
1965         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
1966                            rt2x00_get_field16(eeprom,
1967                                               EEPROM_LED_POLARITY_GPIO_3));
1968         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
1969                            rt2x00_get_field16(eeprom,
1970                                               EEPROM_LED_POLARITY_GPIO_4));
1971         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
1972                            rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
1973         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
1974                            rt2x00_get_field16(eeprom,
1975                                               EEPROM_LED_POLARITY_RDY_G));
1976         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
1977                            rt2x00_get_field16(eeprom,
1978                                               EEPROM_LED_POLARITY_RDY_A));
1979 #endif /* CONFIG_RT73USB_LEDS */
1980
1981         return 0;
1982 }
1983
1984 /*
1985  * RF value list for RF2528
1986  * Supports: 2.4 GHz
1987  */
1988 static const struct rf_channel rf_vals_bg_2528[] = {
1989         { 1,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1990         { 2,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1991         { 3,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1992         { 4,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1993         { 5,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1994         { 6,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1995         { 7,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1996         { 8,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1997         { 9,  0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1998         { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1999         { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
2000         { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
2001         { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
2002         { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
2003 };
2004
2005 /*
2006  * RF value list for RF5226
2007  * Supports: 2.4 GHz & 5.2 GHz
2008  */
2009 static const struct rf_channel rf_vals_5226[] = {
2010         { 1,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
2011         { 2,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
2012         { 3,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
2013         { 4,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
2014         { 5,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
2015         { 6,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
2016         { 7,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
2017         { 8,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
2018         { 9,  0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
2019         { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
2020         { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
2021         { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
2022         { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
2023         { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
2024
2025         /* 802.11 UNI / HyperLan 2 */
2026         { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 },
2027         { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 },
2028         { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b },
2029         { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 },
2030         { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b },
2031         { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 },
2032         { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 },
2033         { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b },
2034
2035         /* 802.11 HyperLan 2 */
2036         { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 },
2037         { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b },
2038         { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 },
2039         { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b },
2040         { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 },
2041         { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 },
2042         { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b },
2043         { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 },
2044         { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b },
2045         { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 },
2046
2047         /* 802.11 UNII */
2048         { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 },
2049         { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f },
2050         { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 },
2051         { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 },
2052         { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f },
2053         { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 },
2054
2055         /* MMAC(Japan)J52 ch 34,38,42,46 */
2056         { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b },
2057         { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 },
2058         { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b },
2059         { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 },
2060 };
2061
2062 /*
2063  * RF value list for RF5225 & RF2527
2064  * Supports: 2.4 GHz & 5.2 GHz
2065  */
2066 static const struct rf_channel rf_vals_5225_2527[] = {
2067         { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2068         { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2069         { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2070         { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2071         { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2072         { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2073         { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2074         { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2075         { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2076         { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2077         { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2078         { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2079         { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2080         { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2081
2082         /* 802.11 UNI / HyperLan 2 */
2083         { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
2084         { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
2085         { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
2086         { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
2087         { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
2088         { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
2089         { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
2090         { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
2091
2092         /* 802.11 HyperLan 2 */
2093         { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
2094         { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
2095         { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
2096         { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
2097         { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
2098         { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
2099         { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
2100         { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
2101         { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
2102         { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
2103
2104         /* 802.11 UNII */
2105         { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
2106         { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
2107         { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
2108         { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
2109         { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
2110         { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
2111
2112         /* MMAC(Japan)J52 ch 34,38,42,46 */
2113         { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
2114         { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
2115         { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
2116         { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
2117 };
2118
2119
2120 static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
2121 {
2122         struct hw_mode_spec *spec = &rt2x00dev->spec;
2123         struct channel_info *info;
2124         char *tx_power;
2125         unsigned int i;
2126
2127         /*
2128          * Initialize all hw fields.
2129          */
2130         rt2x00dev->hw->flags =
2131             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
2132             IEEE80211_HW_SIGNAL_DBM;
2133         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
2134
2135         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
2136         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
2137                                 rt2x00_eeprom_addr(rt2x00dev,
2138                                                    EEPROM_MAC_ADDR_0));
2139
2140         /*
2141          * Initialize hw_mode information.
2142          */
2143         spec->supported_bands = SUPPORT_BAND_2GHZ;
2144         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
2145
2146         if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
2147                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
2148                 spec->channels = rf_vals_bg_2528;
2149         } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
2150                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
2151                 spec->num_channels = ARRAY_SIZE(rf_vals_5226);
2152                 spec->channels = rf_vals_5226;
2153         } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
2154                 spec->num_channels = 14;
2155                 spec->channels = rf_vals_5225_2527;
2156         } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
2157                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
2158                 spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
2159                 spec->channels = rf_vals_5225_2527;
2160         }
2161
2162         /*
2163          * Create channel information array
2164          */
2165         info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
2166         if (!info)
2167                 return -ENOMEM;
2168
2169         spec->channels_info = info;
2170
2171         tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
2172         for (i = 0; i < 14; i++)
2173                 info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
2174
2175         if (spec->num_channels > 14) {
2176                 tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
2177                 for (i = 14; i < spec->num_channels; i++)
2178                         info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
2179         }
2180
2181         return 0;
2182 }
2183
2184 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
2185 {
2186         int retval;
2187
2188         /*
2189          * Allocate eeprom data.
2190          */
2191         retval = rt73usb_validate_eeprom(rt2x00dev);
2192         if (retval)
2193                 return retval;
2194
2195         retval = rt73usb_init_eeprom(rt2x00dev);
2196         if (retval)
2197                 return retval;
2198
2199         /*
2200          * Initialize hw specifications.
2201          */
2202         retval = rt73usb_probe_hw_mode(rt2x00dev);
2203         if (retval)
2204                 return retval;
2205
2206         /*
2207          * This device requires firmware.
2208          */
2209         __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
2210         __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
2211         if (!modparam_nohwcrypt)
2212                 __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
2213
2214         /*
2215          * Set the rssi offset.
2216          */
2217         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
2218
2219         return 0;
2220 }
2221
2222 /*
2223  * IEEE80211 stack callback functions.
2224  */
2225 static int rt73usb_set_retry_limit(struct ieee80211_hw *hw,
2226                                    u32 short_retry, u32 long_retry)
2227 {
2228         struct rt2x00_dev *rt2x00dev = hw->priv;
2229         u32 reg;
2230
2231         rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
2232         rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry);
2233         rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry);
2234         rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
2235
2236         return 0;
2237 }
2238
2239 static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
2240                            const struct ieee80211_tx_queue_params *params)
2241 {
2242         struct rt2x00_dev *rt2x00dev = hw->priv;
2243         struct data_queue *queue;
2244         struct rt2x00_field32 field;
2245         int retval;
2246         u32 reg;
2247
2248         /*
2249          * First pass the configuration through rt2x00lib, that will
2250          * update the queue settings and validate the input. After that
2251          * we are free to update the registers based on the value
2252          * in the queue parameter.
2253          */
2254         retval = rt2x00mac_conf_tx(hw, queue_idx, params);
2255         if (retval)
2256                 return retval;
2257
2258         queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
2259
2260         /* Update WMM TXOP register */
2261         if (queue_idx < 2) {
2262                 field.bit_offset = queue_idx * 16;
2263                 field.bit_mask = 0xffff << field.bit_offset;
2264
2265                 rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
2266                 rt2x00_set_field32(&reg, field, queue->txop);
2267                 rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
2268         } else if (queue_idx < 4) {
2269                 field.bit_offset = (queue_idx - 2) * 16;
2270                 field.bit_mask = 0xffff << field.bit_offset;
2271
2272                 rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
2273                 rt2x00_set_field32(&reg, field, queue->txop);
2274                 rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
2275         }
2276
2277         /* Update WMM registers */
2278         field.bit_offset = queue_idx * 4;
2279         field.bit_mask = 0xf << field.bit_offset;
2280
2281         rt73usb_register_read(rt2x00dev, AIFSN_CSR, &reg);
2282         rt2x00_set_field32(&reg, field, queue->aifs);
2283         rt73usb_register_write(rt2x00dev, AIFSN_CSR, reg);
2284
2285         rt73usb_register_read(rt2x00dev, CWMIN_CSR, &reg);
2286         rt2x00_set_field32(&reg, field, queue->cw_min);
2287         rt73usb_register_write(rt2x00dev, CWMIN_CSR, reg);
2288
2289         rt73usb_register_read(rt2x00dev, CWMAX_CSR, &reg);
2290         rt2x00_set_field32(&reg, field, queue->cw_max);
2291         rt73usb_register_write(rt2x00dev, CWMAX_CSR, reg);
2292
2293         return 0;
2294 }
2295
2296 #if 0
2297 /*
2298  * Mac80211 demands get_tsf must be atomic.
2299  * This is not possible for rt73usb since all register access
2300  * functions require sleeping. Untill mac80211 no longer needs
2301  * get_tsf to be atomic, this function should be disabled.
2302  */
2303 static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
2304 {
2305         struct rt2x00_dev *rt2x00dev = hw->priv;
2306         u64 tsf;
2307         u32 reg;
2308
2309         rt73usb_register_read(rt2x00dev, TXRX_CSR13, &reg);
2310         tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
2311         rt73usb_register_read(rt2x00dev, TXRX_CSR12, &reg);
2312         tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
2313
2314         return tsf;
2315 }
2316 #else
2317 #define rt73usb_get_tsf NULL
2318 #endif
2319
2320 static const struct ieee80211_ops rt73usb_mac80211_ops = {
2321         .tx                     = rt2x00mac_tx,
2322         .start                  = rt2x00mac_start,
2323         .stop                   = rt2x00mac_stop,
2324         .add_interface          = rt2x00mac_add_interface,
2325         .remove_interface       = rt2x00mac_remove_interface,
2326         .config                 = rt2x00mac_config,
2327         .config_interface       = rt2x00mac_config_interface,
2328         .configure_filter       = rt2x00mac_configure_filter,
2329         .set_key                = rt2x00mac_set_key,
2330         .get_stats              = rt2x00mac_get_stats,
2331         .set_retry_limit        = rt73usb_set_retry_limit,
2332         .bss_info_changed       = rt2x00mac_bss_info_changed,
2333         .conf_tx                = rt73usb_conf_tx,
2334         .get_tx_stats           = rt2x00mac_get_tx_stats,
2335         .get_tsf                = rt73usb_get_tsf,
2336 };
2337
2338 static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
2339         .probe_hw               = rt73usb_probe_hw,
2340         .get_firmware_name      = rt73usb_get_firmware_name,
2341         .get_firmware_crc       = rt73usb_get_firmware_crc,
2342         .load_firmware          = rt73usb_load_firmware,
2343         .initialize             = rt2x00usb_initialize,
2344         .uninitialize           = rt2x00usb_uninitialize,
2345         .init_rxentry           = rt2x00usb_init_rxentry,
2346         .init_txentry           = rt2x00usb_init_txentry,
2347         .set_device_state       = rt73usb_set_device_state,
2348         .link_stats             = rt73usb_link_stats,
2349         .reset_tuner            = rt73usb_reset_tuner,
2350         .link_tuner             = rt73usb_link_tuner,
2351         .write_tx_desc          = rt73usb_write_tx_desc,
2352         .write_tx_data          = rt2x00usb_write_tx_data,
2353         .write_beacon           = rt73usb_write_beacon,
2354         .get_tx_data_len        = rt73usb_get_tx_data_len,
2355         .kick_tx_queue          = rt73usb_kick_tx_queue,
2356         .fill_rxdone            = rt73usb_fill_rxdone,
2357         .config_shared_key      = rt73usb_config_shared_key,
2358         .config_pairwise_key    = rt73usb_config_pairwise_key,
2359         .config_filter          = rt73usb_config_filter,
2360         .config_intf            = rt73usb_config_intf,
2361         .config_erp             = rt73usb_config_erp,
2362         .config                 = rt73usb_config,
2363 };
2364
2365 static const struct data_queue_desc rt73usb_queue_rx = {
2366         .entry_num              = RX_ENTRIES,
2367         .data_size              = DATA_FRAME_SIZE,
2368         .desc_size              = RXD_DESC_SIZE,
2369         .priv_size              = sizeof(struct queue_entry_priv_usb),
2370 };
2371
2372 static const struct data_queue_desc rt73usb_queue_tx = {
2373         .entry_num              = TX_ENTRIES,
2374         .data_size              = DATA_FRAME_SIZE,
2375         .desc_size              = TXD_DESC_SIZE,
2376         .priv_size              = sizeof(struct queue_entry_priv_usb),
2377 };
2378
2379 static const struct data_queue_desc rt73usb_queue_bcn = {
2380         .entry_num              = 4 * BEACON_ENTRIES,
2381         .data_size              = MGMT_FRAME_SIZE,
2382         .desc_size              = TXINFO_SIZE,
2383         .priv_size              = sizeof(struct queue_entry_priv_usb),
2384 };
2385
2386 static const struct rt2x00_ops rt73usb_ops = {
2387         .name           = KBUILD_MODNAME,
2388         .max_sta_intf   = 1,
2389         .max_ap_intf    = 4,
2390         .eeprom_size    = EEPROM_SIZE,
2391         .rf_size        = RF_SIZE,
2392         .tx_queues      = NUM_TX_QUEUES,
2393         .rx             = &rt73usb_queue_rx,
2394         .tx             = &rt73usb_queue_tx,
2395         .bcn            = &rt73usb_queue_bcn,
2396         .lib            = &rt73usb_rt2x00_ops,
2397         .hw             = &rt73usb_mac80211_ops,
2398 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
2399         .debugfs        = &rt73usb_rt2x00debug,
2400 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2401 };
2402
2403 /*
2404  * rt73usb module information.
2405  */
2406 static struct usb_device_id rt73usb_device_table[] = {
2407         /* AboCom */
2408         { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
2409         /* Askey */
2410         { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
2411         /* ASUS */
2412         { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) },
2413         { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) },
2414         /* Belkin */
2415         { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
2416         { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
2417         { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
2418         { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
2419         /* Billionton */
2420         { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
2421         /* Buffalo */
2422         { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
2423         /* CNet */
2424         { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
2425         { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
2426         /* Conceptronic */
2427         { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
2428         /* Corega */
2429         { USB_DEVICE(0x07aa, 0x002e), USB_DEVICE_DATA(&rt73usb_ops) },
2430         /* D-Link */
2431         { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
2432         { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
2433         { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
2434         { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
2435         /* Gemtek */
2436         { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
2437         /* Gigabyte */
2438         { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) },
2439         { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) },
2440         /* Huawei-3Com */
2441         { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
2442         /* Hercules */
2443         { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
2444         { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
2445         /* Linksys */
2446         { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
2447         { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
2448         /* MSI */
2449         { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
2450         { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
2451         { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
2452         { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
2453         /* Ralink */
2454         { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
2455         { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
2456         /* Qcom */
2457         { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
2458         { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
2459         { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
2460         /* Senao */
2461         { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
2462         /* Sitecom */
2463         { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
2464         { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
2465         /* Surecom */
2466         { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
2467         /* Planex */
2468         { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
2469         { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
2470         { 0, }
2471 };
2472
2473 MODULE_AUTHOR(DRV_PROJECT);
2474 MODULE_VERSION(DRV_VERSION);
2475 MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver.");
2476 MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards");
2477 MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
2478 MODULE_FIRMWARE(FIRMWARE_RT2571);
2479 MODULE_LICENSE("GPL");
2480
2481 static struct usb_driver rt73usb_driver = {
2482         .name           = KBUILD_MODNAME,
2483         .id_table       = rt73usb_device_table,
2484         .probe          = rt2x00usb_probe,
2485         .disconnect     = rt2x00usb_disconnect,
2486         .suspend        = rt2x00usb_suspend,
2487         .resume         = rt2x00usb_resume,
2488 };
2489
2490 static int __init rt73usb_init(void)
2491 {
2492         return usb_register(&rt73usb_driver);
2493 }
2494
2495 static void __exit rt73usb_exit(void)
2496 {
2497         usb_deregister(&rt73usb_driver);
2498 }
2499
2500 module_init(rt73usb_init);
2501 module_exit(rt73usb_exit);