1 /******************************************************************************
3 * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * James P. Ketrenos <ipw2100-admin@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/version.h>
30 #include <linux/init.h>
31 #include <linux/pci.h>
32 #include <linux/dma-mapping.h>
33 #include <linux/delay.h>
34 #include <linux/skbuff.h>
35 #include <linux/netdevice.h>
36 #include <linux/wireless.h>
37 #include <net/mac80211.h>
38 #include <linux/etherdevice.h>
39 #include <asm/unaligned.h>
41 #include "iwl-eeprom.h"
45 #include "iwl-helpers.h"
46 #include "iwl-calib.h"
49 static int iwl4965_send_tx_power(struct iwl_priv *priv);
50 static int iwl4965_hw_get_temperature(const struct iwl_priv *priv);
52 /* Change firmware file name, using "-" and incrementing number,
53 * *only* when uCode interface or architecture changes so that it
54 * is not compatible with earlier drivers.
55 * This number will also appear in << 8 position of 1st dword of uCode file */
56 #define IWL4965_UCODE_API "-2"
59 /* module parameters */
60 static struct iwl_mod_params iwl4965_mod_params = {
61 .num_of_queues = IWL49_NUM_QUEUES,
62 .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
66 /* the rest are 0 by default */
69 /* check contents of special bootstrap uCode SRAM */
70 static int iwl4965_verify_bsm(struct iwl_priv *priv)
72 __le32 *image = priv->ucode_boot.v_addr;
73 u32 len = priv->ucode_boot.len;
77 IWL_DEBUG_INFO("Begin verify bsm\n");
79 /* verify BSM SRAM contents */
80 val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
81 for (reg = BSM_SRAM_LOWER_BOUND;
82 reg < BSM_SRAM_LOWER_BOUND + len;
83 reg += sizeof(u32), image++) {
84 val = iwl_read_prph(priv, reg);
85 if (val != le32_to_cpu(*image)) {
86 IWL_ERROR("BSM uCode verification failed at "
87 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
89 reg - BSM_SRAM_LOWER_BOUND, len,
90 val, le32_to_cpu(*image));
95 IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
101 * iwl4965_load_bsm - Load bootstrap instructions
105 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
106 * in special SRAM that does not power down during RFKILL. When powering back
107 * up after power-saving sleeps (or during initial uCode load), the BSM loads
108 * the bootstrap program into the on-board processor, and starts it.
110 * The bootstrap program loads (via DMA) instructions and data for a new
111 * program from host DRAM locations indicated by the host driver in the
112 * BSM_DRAM_* registers. Once the new program is loaded, it starts
115 * When initializing the NIC, the host driver points the BSM to the
116 * "initialize" uCode image. This uCode sets up some internal data, then
117 * notifies host via "initialize alive" that it is complete.
119 * The host then replaces the BSM_DRAM_* pointer values to point to the
120 * normal runtime uCode instructions and a backup uCode data cache buffer
121 * (filled initially with starting data values for the on-board processor),
122 * then triggers the "initialize" uCode to load and launch the runtime uCode,
123 * which begins normal operation.
125 * When doing a power-save shutdown, runtime uCode saves data SRAM into
126 * the backup data cache in DRAM before SRAM is powered down.
128 * When powering back up, the BSM loads the bootstrap program. This reloads
129 * the runtime uCode instructions and the backup data cache into SRAM,
130 * and re-launches the runtime uCode from where it left off.
132 static int iwl4965_load_bsm(struct iwl_priv *priv)
134 __le32 *image = priv->ucode_boot.v_addr;
135 u32 len = priv->ucode_boot.len;
145 IWL_DEBUG_INFO("Begin load bsm\n");
147 priv->ucode_type = UCODE_RT;
149 /* make sure bootstrap program is no larger than BSM's SRAM size */
150 if (len > IWL_MAX_BSM_SIZE)
153 /* Tell bootstrap uCode where to find the "Initialize" uCode
154 * in host DRAM ... host DRAM physical address bits 35:4 for 4965.
155 * NOTE: iwl_init_alive_start() will replace these values,
156 * after the "initialize" uCode has run, to point to
157 * runtime/protocol instructions and backup data cache.
159 pinst = priv->ucode_init.p_addr >> 4;
160 pdata = priv->ucode_init_data.p_addr >> 4;
161 inst_len = priv->ucode_init.len;
162 data_len = priv->ucode_init_data.len;
164 ret = iwl_grab_nic_access(priv);
168 iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
169 iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
170 iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
171 iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
173 /* Fill BSM memory with bootstrap instructions */
174 for (reg_offset = BSM_SRAM_LOWER_BOUND;
175 reg_offset < BSM_SRAM_LOWER_BOUND + len;
176 reg_offset += sizeof(u32), image++)
177 _iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
179 ret = iwl4965_verify_bsm(priv);
181 iwl_release_nic_access(priv);
185 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
186 iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
187 iwl_write_prph(priv, BSM_WR_MEM_DST_REG, RTC_INST_LOWER_BOUND);
188 iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
190 /* Load bootstrap code into instruction SRAM now,
191 * to prepare to load "initialize" uCode */
192 iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
194 /* Wait for load of bootstrap uCode to finish */
195 for (i = 0; i < 100; i++) {
196 done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
197 if (!(done & BSM_WR_CTRL_REG_BIT_START))
202 IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
204 IWL_ERROR("BSM write did not complete!\n");
208 /* Enable future boot loads whenever power management unit triggers it
209 * (e.g. when powering back up after power-save shutdown) */
210 iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
212 iwl_release_nic_access(priv);
218 * iwl4965_set_ucode_ptrs - Set uCode address location
220 * Tell initialization uCode where to find runtime uCode.
222 * BSM registers initially contain pointers to initialization uCode.
223 * We need to replace them to load runtime uCode inst and data,
224 * and to save runtime data when powering down.
226 static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
233 /* bits 35:4 for 4965 */
234 pinst = priv->ucode_code.p_addr >> 4;
235 pdata = priv->ucode_data_backup.p_addr >> 4;
237 spin_lock_irqsave(&priv->lock, flags);
238 ret = iwl_grab_nic_access(priv);
240 spin_unlock_irqrestore(&priv->lock, flags);
244 /* Tell bootstrap uCode where to find image to load */
245 iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
246 iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
247 iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
248 priv->ucode_data.len);
250 /* Inst bytecount must be last to set up, bit 31 signals uCode
251 * that all new ptr/size info is in place */
252 iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
253 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
254 iwl_release_nic_access(priv);
256 spin_unlock_irqrestore(&priv->lock, flags);
258 IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
264 * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received
266 * Called after REPLY_ALIVE notification received from "initialize" uCode.
268 * The 4965 "initialize" ALIVE reply contains calibration data for:
269 * Voltage, temperature, and MIMO tx gain correction, now stored in priv
270 * (3945 does not contain this data).
272 * Tell "initialize" uCode to go ahead and load the runtime uCode.
274 static void iwl4965_init_alive_start(struct iwl_priv *priv)
276 /* Check alive response for "valid" sign from uCode */
277 if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
278 /* We had an error bringing up the hardware, so take it
279 * all the way back down so we can try again */
280 IWL_DEBUG_INFO("Initialize Alive failed.\n");
284 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
285 * This is a paranoid check, because we would not have gotten the
286 * "initialize" alive if code weren't properly loaded. */
287 if (iwl_verify_ucode(priv)) {
288 /* Runtime instruction load was bad;
289 * take it all the way back down so we can try again */
290 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
294 /* Calculate temperature */
295 priv->temperature = iwl4965_hw_get_temperature(priv);
297 /* Send pointers to protocol/runtime uCode image ... init code will
298 * load and launch runtime uCode, which will send us another "Alive"
300 IWL_DEBUG_INFO("Initialization Alive received.\n");
301 if (iwl4965_set_ucode_ptrs(priv)) {
302 /* Runtime instruction load won't happen;
303 * take it all the way back down so we can try again */
304 IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
310 queue_work(priv->workqueue, &priv->restart);
313 static int is_fat_channel(__le32 rxon_flags)
315 return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) ||
316 (rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK);
323 static int iwl4965_eeprom_check_version(struct iwl_priv *priv)
328 eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
330 calib_ver = iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET);
332 if (eeprom_ver < EEPROM_4965_EEPROM_VERSION ||
333 calib_ver < EEPROM_4965_TX_POWER_VERSION)
338 IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
339 eeprom_ver, EEPROM_4965_EEPROM_VERSION,
340 calib_ver, EEPROM_4965_TX_POWER_VERSION);
344 int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
349 spin_lock_irqsave(&priv->lock, flags);
350 ret = iwl_grab_nic_access(priv);
352 spin_unlock_irqrestore(&priv->lock, flags);
356 if (src == IWL_PWR_SRC_VAUX) {
358 ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE,
361 if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) {
362 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
363 APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
364 ~APMG_PS_CTRL_MSK_PWR_SRC);
367 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
368 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
369 ~APMG_PS_CTRL_MSK_PWR_SRC);
372 iwl_release_nic_access(priv);
373 spin_unlock_irqrestore(&priv->lock, flags);
379 * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask
380 * must be called under priv->lock and mac access
382 static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
384 iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
387 static int iwl4965_apm_init(struct iwl_priv *priv)
391 iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
392 CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
394 /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
395 iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
396 CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
398 /* set "initialization complete" bit to move adapter
399 * D0U* --> D0A* state */
400 iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
402 /* wait for clock stabilization */
403 ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
404 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
405 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
407 IWL_DEBUG_INFO("Failed to init the card\n");
411 ret = iwl_grab_nic_access(priv);
416 iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
417 APMG_CLK_VAL_BSM_CLK_RQT);
421 /* disable L1-Active */
422 iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
423 APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
425 iwl_release_nic_access(priv);
431 static void iwl4965_nic_config(struct iwl_priv *priv)
438 spin_lock_irqsave(&priv->lock, flags);
440 if ((priv->rev_id & 0x80) == 0x80 && (priv->rev_id & 0x7f) < 8) {
441 pci_read_config_dword(priv->pci_dev, PCI_REG_WUM8, &val);
442 /* Enable No Snoop field */
443 pci_write_config_dword(priv->pci_dev, PCI_REG_WUM8,
447 pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
449 /* L1 is enabled by BIOS */
450 if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
451 /* diable L0S disabled L1A enabled */
452 iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
454 /* L0S enabled L1A disabled */
455 iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
457 radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
459 /* write radio config values to register */
460 if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
461 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
462 EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
463 EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
464 EEPROM_RF_CFG_DASH_MSK(radio_cfg));
466 /* set CSR_HW_CONFIG_REG for uCode use */
467 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
468 CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
469 CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
471 priv->calib_info = (struct iwl_eeprom_calib_info *)
472 iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET);
474 spin_unlock_irqrestore(&priv->lock, flags);
477 static int iwl4965_apm_stop_master(struct iwl_priv *priv)
482 spin_lock_irqsave(&priv->lock, flags);
484 /* set stop master bit */
485 iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
487 ret = iwl_poll_bit(priv, CSR_RESET,
488 CSR_RESET_REG_FLAG_MASTER_DISABLED,
489 CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
494 spin_unlock_irqrestore(&priv->lock, flags);
495 IWL_DEBUG_INFO("stop master\n");
500 static void iwl4965_apm_stop(struct iwl_priv *priv)
504 iwl4965_apm_stop_master(priv);
506 spin_lock_irqsave(&priv->lock, flags);
508 iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
512 iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
513 spin_unlock_irqrestore(&priv->lock, flags);
516 static int iwl4965_apm_reset(struct iwl_priv *priv)
521 iwl4965_apm_stop_master(priv);
523 spin_lock_irqsave(&priv->lock, flags);
525 iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
529 /* FIXME: put here L1A -L0S w/a */
531 iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
533 ret = iwl_poll_bit(priv, CSR_RESET,
534 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
535 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25);
542 ret = iwl_grab_nic_access(priv);
545 /* Enable DMA and BSM Clock */
546 iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT |
547 APMG_CLK_VAL_BSM_CLK_RQT);
552 iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
553 APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
555 iwl_release_nic_access(priv);
557 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
558 wake_up_interruptible(&priv->wait_command_queue);
561 spin_unlock_irqrestore(&priv->lock, flags);
566 /* Reset differential Rx gains in NIC to prepare for chain noise calibration.
567 * Called after every association, but this runs only once!
568 * ... once chain noise is calibrated the first time, it's good forever. */
569 static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
571 struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
573 if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
574 struct iwl4965_calibration_cmd cmd;
576 memset(&cmd, 0, sizeof(cmd));
577 cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
581 if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
583 IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n");
584 data->state = IWL_CHAIN_NOISE_ACCUMULATE;
585 IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
589 static void iwl4965_gain_computation(struct iwl_priv *priv,
591 u16 min_average_noise_antenna_i,
592 u32 min_average_noise)
595 struct iwl_chain_noise_data *data = &priv->chain_noise_data;
597 data->delta_gain_code[min_average_noise_antenna_i] = 0;
599 for (i = 0; i < NUM_RX_CHAINS; i++) {
602 if (!(data->disconn_array[i]) &&
603 (data->delta_gain_code[i] ==
604 CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
605 delta_g = average_noise[i] - min_average_noise;
606 data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
607 data->delta_gain_code[i] =
608 min(data->delta_gain_code[i],
609 (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
611 data->delta_gain_code[i] =
612 (data->delta_gain_code[i] | (1 << 2));
614 data->delta_gain_code[i] = 0;
617 IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
618 data->delta_gain_code[0],
619 data->delta_gain_code[1],
620 data->delta_gain_code[2]);
622 /* Differential gain gets sent to uCode only once */
623 if (!data->radio_write) {
624 struct iwl4965_calibration_cmd cmd;
625 data->radio_write = 1;
627 memset(&cmd, 0, sizeof(cmd));
628 cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
629 cmd.diff_gain_a = data->delta_gain_code[0];
630 cmd.diff_gain_b = data->delta_gain_code[1];
631 cmd.diff_gain_c = data->delta_gain_code[2];
632 ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
635 IWL_DEBUG_CALIB("fail sending cmd "
636 "REPLY_PHY_CALIBRATION_CMD \n");
638 /* TODO we might want recalculate
639 * rx_chain in rxon cmd */
641 /* Mark so we run this algo only once! */
642 data->state = IWL_CHAIN_NOISE_CALIBRATED;
644 data->chain_noise_a = 0;
645 data->chain_noise_b = 0;
646 data->chain_noise_c = 0;
647 data->chain_signal_a = 0;
648 data->chain_signal_b = 0;
649 data->chain_signal_c = 0;
650 data->beacon_count = 0;
653 static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
656 if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
657 *tx_flags |= TX_CMD_FLG_RTS_MSK;
658 *tx_flags &= ~TX_CMD_FLG_CTS_MSK;
659 } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
660 *tx_flags &= ~TX_CMD_FLG_RTS_MSK;
661 *tx_flags |= TX_CMD_FLG_CTS_MSK;
665 static void iwl4965_bg_txpower_work(struct work_struct *work)
667 struct iwl_priv *priv = container_of(work, struct iwl_priv,
670 /* If a scan happened to start before we got here
671 * then just return; the statistics notification will
672 * kick off another scheduled work to compensate for
673 * any temperature delta we missed here. */
674 if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
675 test_bit(STATUS_SCANNING, &priv->status))
678 mutex_lock(&priv->mutex);
680 /* Regardless of if we are assocaited, we must reconfigure the
681 * TX power since frames can be sent on non-radar channels while
683 iwl4965_send_tx_power(priv);
685 /* Update last_temperature to keep is_calib_needed from running
686 * when it isn't needed... */
687 priv->last_temperature = priv->temperature;
689 mutex_unlock(&priv->mutex);
693 * Acquire priv->lock before calling this function !
695 static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index)
697 iwl_write_direct32(priv, HBUS_TARG_WRPTR,
698 (index & 0xff) | (txq_id << 8));
699 iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
703 * iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
704 * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
705 * @scd_retry: (1) Indicates queue will be used in aggregation mode
707 * NOTE: Acquire priv->lock before calling this function !
709 static void iwl4965_tx_queue_set_status(struct iwl_priv *priv,
710 struct iwl_tx_queue *txq,
711 int tx_fifo_id, int scd_retry)
713 int txq_id = txq->q.id;
715 /* Find out whether to activate Tx queue */
716 int active = test_bit(txq_id, &priv->txq_ctx_active_msk)?1:0;
718 /* Set up and activate */
719 iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
720 (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
721 (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) |
722 (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) |
723 (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
724 IWL49_SCD_QUEUE_STTS_REG_MSK);
726 txq->sched_retry = scd_retry;
728 IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
729 active ? "Activate" : "Deactivate",
730 scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
733 static const u16 default_queue_to_tx_fifo[] = {
743 static int iwl4965_alive_notify(struct iwl_priv *priv)
750 spin_lock_irqsave(&priv->lock, flags);
752 ret = iwl_grab_nic_access(priv);
754 spin_unlock_irqrestore(&priv->lock, flags);
758 /* Clear 4965's internal Tx Scheduler data base */
759 priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
760 a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
761 for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
762 iwl_write_targ_mem(priv, a, 0);
763 for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
764 iwl_write_targ_mem(priv, a, 0);
765 for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
766 iwl_write_targ_mem(priv, a, 0);
768 /* Tel 4965 where to find Tx byte count tables */
769 iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR,
771 offsetof(struct iwl4965_shared, queues_byte_cnt_tbls)) >> 10);
773 /* Disable chain mode for all queues */
774 iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0);
776 /* Initialize each Tx queue (including the command queue) */
777 for (i = 0; i < priv->hw_params.max_txq_num; i++) {
779 /* TFD circular buffer read/write indexes */
780 iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0);
781 iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
783 /* Max Tx Window size for Scheduler-ACK mode */
784 iwl_write_targ_mem(priv, priv->scd_base_addr +
785 IWL49_SCD_CONTEXT_QUEUE_OFFSET(i),
787 IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
788 IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
791 iwl_write_targ_mem(priv, priv->scd_base_addr +
792 IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
795 IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
796 IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
799 iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK,
800 (1 << priv->hw_params.max_txq_num) - 1);
802 /* Activate all Tx DMA/FIFO channels */
803 priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 7));
805 iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
807 /* Map each Tx/cmd queue to its corresponding fifo */
808 for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
809 int ac = default_queue_to_tx_fifo[i];
810 iwl_txq_ctx_activate(priv, i);
811 iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
814 iwl_release_nic_access(priv);
815 spin_unlock_irqrestore(&priv->lock, flags);
820 static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
824 .auto_corr_min_ofdm = 85,
825 .auto_corr_min_ofdm_mrc = 170,
826 .auto_corr_min_ofdm_x1 = 105,
827 .auto_corr_min_ofdm_mrc_x1 = 220,
829 .auto_corr_max_ofdm = 120,
830 .auto_corr_max_ofdm_mrc = 210,
831 .auto_corr_max_ofdm_x1 = 140,
832 .auto_corr_max_ofdm_mrc_x1 = 270,
834 .auto_corr_min_cck = 125,
835 .auto_corr_max_cck = 200,
836 .auto_corr_min_cck_mrc = 200,
837 .auto_corr_max_cck_mrc = 400,
844 * iwl4965_hw_set_hw_params
846 * Called when initializing driver
848 static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
851 if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) ||
852 (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
853 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
854 IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES);
858 priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
859 priv->hw_params.first_ampdu_q = IWL49_FIRST_AMPDU_QUEUE;
860 priv->hw_params.max_stations = IWL4965_STATION_COUNT;
861 priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID;
862 priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
863 priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
864 priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
865 priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ);
867 priv->hw_params.tx_chains_num = 2;
868 priv->hw_params.rx_chains_num = 2;
869 priv->hw_params.valid_tx_ant = ANT_A | ANT_B;
870 priv->hw_params.valid_rx_ant = ANT_A | ANT_B;
871 priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
873 priv->hw_params.sens = &iwl4965_sensitivity;
878 /* set card power command */
879 static int iwl4965_set_power(struct iwl_priv *priv,
884 ret = iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD,
885 sizeof(struct iwl4965_powertable_cmd),
890 static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
903 *res = ((num * 2 + denom) / (denom * 2)) * sign;
909 * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower
911 * Determines power supply voltage compensation for txpower calculations.
912 * Returns number of 1/2-dB steps to subtract from gain table index,
913 * to compensate for difference between power supply voltage during
914 * factory measurements, vs. current power supply voltage.
916 * Voltage indication is higher for lower voltage.
917 * Lower voltage requires more gain (lower gain table index).
919 static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
924 if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
925 (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage))
928 iwl4965_math_div_round(current_voltage - eeprom_voltage,
929 TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp);
931 if (current_voltage > eeprom_voltage)
933 if ((comp < -2) || (comp > 2))
939 static s32 iwl4965_get_tx_atten_grp(u16 channel)
941 if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
942 channel <= CALIB_IWL_TX_ATTEN_GR5_LCH)
943 return CALIB_CH_GROUP_5;
945 if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH &&
946 channel <= CALIB_IWL_TX_ATTEN_GR1_LCH)
947 return CALIB_CH_GROUP_1;
949 if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH &&
950 channel <= CALIB_IWL_TX_ATTEN_GR2_LCH)
951 return CALIB_CH_GROUP_2;
953 if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH &&
954 channel <= CALIB_IWL_TX_ATTEN_GR3_LCH)
955 return CALIB_CH_GROUP_3;
957 if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH &&
958 channel <= CALIB_IWL_TX_ATTEN_GR4_LCH)
959 return CALIB_CH_GROUP_4;
961 IWL_ERROR("Can't find txatten group for channel %d.\n", channel);
965 static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel)
969 for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
970 if (priv->calib_info->band_info[b].ch_from == 0)
973 if ((channel >= priv->calib_info->band_info[b].ch_from)
974 && (channel <= priv->calib_info->band_info[b].ch_to))
981 static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
988 iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
994 * iwl4965_interpolate_chan - Interpolate factory measurements for one channel
996 * Interpolates factory measurements from the two sample channels within a
997 * sub-band, to apply to channel of interest. Interpolation is proportional to
998 * differences in channel frequencies, which is proportional to differences
1001 static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
1002 struct iwl_eeprom_calib_ch_info *chan_info)
1007 const struct iwl_eeprom_calib_measure *m1;
1008 const struct iwl_eeprom_calib_measure *m2;
1009 struct iwl_eeprom_calib_measure *omeas;
1013 s = iwl4965_get_sub_band(priv, channel);
1014 if (s >= EEPROM_TX_POWER_BANDS) {
1015 IWL_ERROR("Tx Power can not find channel %d ", channel);
1019 ch_i1 = priv->calib_info->band_info[s].ch1.ch_num;
1020 ch_i2 = priv->calib_info->band_info[s].ch2.ch_num;
1021 chan_info->ch_num = (u8) channel;
1023 IWL_DEBUG_TXPOWER("channel %d subband %d factory cal ch %d & %d\n",
1024 channel, s, ch_i1, ch_i2);
1026 for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
1027 for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
1028 m1 = &(priv->calib_info->band_info[s].ch1.
1029 measurements[c][m]);
1030 m2 = &(priv->calib_info->band_info[s].ch2.
1031 measurements[c][m]);
1032 omeas = &(chan_info->measurements[c][m]);
1035 (u8) iwl4965_interpolate_value(channel, ch_i1,
1040 (u8) iwl4965_interpolate_value(channel, ch_i1,
1041 m1->gain_idx, ch_i2,
1043 omeas->temperature =
1044 (u8) iwl4965_interpolate_value(channel, ch_i1,
1049 (s8) iwl4965_interpolate_value(channel, ch_i1,
1054 ("chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
1055 m1->actual_pow, m2->actual_pow, omeas->actual_pow);
1057 ("chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
1058 m1->gain_idx, m2->gain_idx, omeas->gain_idx);
1060 ("chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
1061 m1->pa_det, m2->pa_det, omeas->pa_det);
1063 ("chain %d meas %d T1=%d T2=%d T=%d\n", c, m,
1064 m1->temperature, m2->temperature,
1065 omeas->temperature);
1072 /* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
1073 * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
1074 static s32 back_off_table[] = {
1075 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
1076 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
1077 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
1078 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
1082 /* Thermal compensation values for txpower for various frequency ranges ...
1083 * ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
1084 static struct iwl4965_txpower_comp_entry {
1085 s32 degrees_per_05db_a;
1086 s32 degrees_per_05db_a_denom;
1087 } tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
1088 {9, 2}, /* group 0 5.2, ch 34-43 */
1089 {4, 1}, /* group 1 5.2, ch 44-70 */
1090 {4, 1}, /* group 2 5.2, ch 71-124 */
1091 {4, 1}, /* group 3 5.2, ch 125-200 */
1092 {3, 1} /* group 4 2.4, ch all */
1095 static s32 get_min_power_index(s32 rate_power_index, u32 band)
1098 if ((rate_power_index & 7) <= 4)
1099 return MIN_TX_GAIN_INDEX_52GHZ_EXT;
1101 return MIN_TX_GAIN_INDEX;
1109 static const struct gain_entry gain_table[2][108] = {
1110 /* 5.2GHz power gain index table */
1112 {123, 0x3F}, /* highest txpower */
1221 /* 2.4GHz power gain index table */
1223 {110, 0x3f}, /* highest txpower */
1334 static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
1335 u8 is_fat, u8 ctrl_chan_high,
1336 struct iwl4965_tx_power_db *tx_power_tbl)
1338 u8 saturation_power;
1340 s32 user_target_power;
1344 s32 current_regulatory;
1345 s32 txatten_grp = CALIB_CH_GROUP_MAX;
1348 const struct iwl_channel_info *ch_info = NULL;
1349 struct iwl_eeprom_calib_ch_info ch_eeprom_info;
1350 const struct iwl_eeprom_calib_measure *measurement;
1353 s32 voltage_compensation;
1354 s32 degrees_per_05db_num;
1355 s32 degrees_per_05db_denom;
1357 s32 temperature_comp[2];
1358 s32 factory_gain_index[2];
1359 s32 factory_actual_pwr[2];
1362 /* user_txpower_limit is in dBm, convert to half-dBm (half-dB units
1363 * are used for indexing into txpower table) */
1364 user_target_power = 2 * priv->tx_power_user_lmt;
1366 /* Get current (RXON) channel, band, width */
1367 IWL_DEBUG_TXPOWER("chan %d band %d is_fat %d\n", channel, band,
1370 ch_info = iwl_get_channel_info(priv, priv->band, channel);
1372 if (!is_channel_valid(ch_info))
1375 /* get txatten group, used to select 1) thermal txpower adjustment
1376 * and 2) mimo txpower balance between Tx chains. */
1377 txatten_grp = iwl4965_get_tx_atten_grp(channel);
1378 if (txatten_grp < 0)
1381 IWL_DEBUG_TXPOWER("channel %d belongs to txatten group %d\n",
1382 channel, txatten_grp);
1391 /* hardware txpower limits ...
1392 * saturation (clipping distortion) txpowers are in half-dBm */
1394 saturation_power = priv->calib_info->saturation_power24;
1396 saturation_power = priv->calib_info->saturation_power52;
1398 if (saturation_power < IWL_TX_POWER_SATURATION_MIN ||
1399 saturation_power > IWL_TX_POWER_SATURATION_MAX) {
1401 saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24;
1403 saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52;
1406 /* regulatory txpower limits ... reg_limit values are in half-dBm,
1407 * max_power_avg values are in dBm, convert * 2 */
1409 reg_limit = ch_info->fat_max_power_avg * 2;
1411 reg_limit = ch_info->max_power_avg * 2;
1413 if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) ||
1414 (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) {
1416 reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24;
1418 reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52;
1421 /* Interpolate txpower calibration values for this channel,
1422 * based on factory calibration tests on spaced channels. */
1423 iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
1425 /* calculate tx gain adjustment based on power supply voltage */
1426 voltage = priv->calib_info->voltage;
1427 init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
1428 voltage_compensation =
1429 iwl4965_get_voltage_compensation(voltage, init_voltage);
1431 IWL_DEBUG_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n",
1433 voltage, voltage_compensation);
1435 /* get current temperature (Celsius) */
1436 current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN);
1437 current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX);
1438 current_temp = KELVIN_TO_CELSIUS(current_temp);
1440 /* select thermal txpower adjustment params, based on channel group
1441 * (same frequency group used for mimo txatten adjustment) */
1442 degrees_per_05db_num =
1443 tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
1444 degrees_per_05db_denom =
1445 tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
1447 /* get per-chain txpower values from factory measurements */
1448 for (c = 0; c < 2; c++) {
1449 measurement = &ch_eeprom_info.measurements[c][1];
1451 /* txgain adjustment (in half-dB steps) based on difference
1452 * between factory and current temperature */
1453 factory_temp = measurement->temperature;
1454 iwl4965_math_div_round((current_temp - factory_temp) *
1455 degrees_per_05db_denom,
1456 degrees_per_05db_num,
1457 &temperature_comp[c]);
1459 factory_gain_index[c] = measurement->gain_idx;
1460 factory_actual_pwr[c] = measurement->actual_pow;
1462 IWL_DEBUG_TXPOWER("chain = %d\n", c);
1463 IWL_DEBUG_TXPOWER("fctry tmp %d, "
1464 "curr tmp %d, comp %d steps\n",
1465 factory_temp, current_temp,
1466 temperature_comp[c]);
1468 IWL_DEBUG_TXPOWER("fctry idx %d, fctry pwr %d\n",
1469 factory_gain_index[c],
1470 factory_actual_pwr[c]);
1473 /* for each of 33 bit-rates (including 1 for CCK) */
1474 for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
1476 union iwl4965_tx_power_dual_stream tx_power;
1478 /* for mimo, reduce each chain's txpower by half
1479 * (3dB, 6 steps), so total output power is regulatory
1482 current_regulatory = reg_limit -
1483 IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
1486 current_regulatory = reg_limit;
1490 /* find txpower limit, either hardware or regulatory */
1491 power_limit = saturation_power - back_off_table[i];
1492 if (power_limit > current_regulatory)
1493 power_limit = current_regulatory;
1495 /* reduce user's txpower request if necessary
1496 * for this rate on this channel */
1497 target_power = user_target_power;
1498 if (target_power > power_limit)
1499 target_power = power_limit;
1501 IWL_DEBUG_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n",
1502 i, saturation_power - back_off_table[i],
1503 current_regulatory, user_target_power,
1506 /* for each of 2 Tx chains (radio transmitters) */
1507 for (c = 0; c < 2; c++) {
1512 (s32)le32_to_cpu(priv->card_alive_init.
1513 tx_atten[txatten_grp][c]);
1517 /* calculate index; higher index means lower txpower */
1518 power_index = (u8) (factory_gain_index[c] -
1520 factory_actual_pwr[c]) -
1521 temperature_comp[c] -
1522 voltage_compensation +
1525 /* IWL_DEBUG_TXPOWER("calculated txpower index %d\n",
1528 if (power_index < get_min_power_index(i, band))
1529 power_index = get_min_power_index(i, band);
1531 /* adjust 5 GHz index to support negative indexes */
1535 /* CCK, rate 32, reduce txpower for CCK */
1536 if (i == POWER_TABLE_CCK_ENTRY)
1538 IWL_TX_POWER_CCK_COMPENSATION_C_STEP;
1540 /* stay within the table! */
1541 if (power_index > 107) {
1542 IWL_WARNING("txpower index %d > 107\n",
1546 if (power_index < 0) {
1547 IWL_WARNING("txpower index %d < 0\n",
1552 /* fill txpower command for this rate/chain */
1553 tx_power.s.radio_tx_gain[c] =
1554 gain_table[band][power_index].radio;
1555 tx_power.s.dsp_predis_atten[c] =
1556 gain_table[band][power_index].dsp;
1558 IWL_DEBUG_TXPOWER("chain %d mimo %d index %d "
1559 "gain 0x%02x dsp %d\n",
1560 c, atten_value, power_index,
1561 tx_power.s.radio_tx_gain[c],
1562 tx_power.s.dsp_predis_atten[c]);
1563 }/* for each chain */
1565 tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
1567 }/* for each rate */
1573 * iwl4965_send_tx_power - Configure the TXPOWER level user limit
1575 * Uses the active RXON for channel, band, and characteristics (fat, high)
1576 * The power limit is taken from priv->tx_power_user_lmt.
1578 static int iwl4965_send_tx_power(struct iwl_priv *priv)
1580 struct iwl4965_txpowertable_cmd cmd = { 0 };
1584 u8 ctrl_chan_high = 0;
1586 if (test_bit(STATUS_SCANNING, &priv->status)) {
1587 /* If this gets hit a lot, switch it to a BUG() and catch
1588 * the stack trace to find out who is calling this during
1590 IWL_WARNING("TX Power requested while scanning!\n");
1594 band = priv->band == IEEE80211_BAND_2GHZ;
1596 is_fat = is_fat_channel(priv->active_rxon.flags);
1599 (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
1603 cmd.channel = priv->active_rxon.channel;
1605 ret = iwl4965_fill_txpower_tbl(priv, band,
1606 le16_to_cpu(priv->active_rxon.channel),
1607 is_fat, ctrl_chan_high, &cmd.tx_power);
1611 ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
1617 static int iwl4965_send_rxon_assoc(struct iwl_priv *priv)
1620 struct iwl4965_rxon_assoc_cmd rxon_assoc;
1621 const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
1622 const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
1624 if ((rxon1->flags == rxon2->flags) &&
1625 (rxon1->filter_flags == rxon2->filter_flags) &&
1626 (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1627 (rxon1->ofdm_ht_single_stream_basic_rates ==
1628 rxon2->ofdm_ht_single_stream_basic_rates) &&
1629 (rxon1->ofdm_ht_dual_stream_basic_rates ==
1630 rxon2->ofdm_ht_dual_stream_basic_rates) &&
1631 (rxon1->rx_chain == rxon2->rx_chain) &&
1632 (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1633 IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n");
1637 rxon_assoc.flags = priv->staging_rxon.flags;
1638 rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
1639 rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
1640 rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
1641 rxon_assoc.reserved = 0;
1642 rxon_assoc.ofdm_ht_single_stream_basic_rates =
1643 priv->staging_rxon.ofdm_ht_single_stream_basic_rates;
1644 rxon_assoc.ofdm_ht_dual_stream_basic_rates =
1645 priv->staging_rxon.ofdm_ht_dual_stream_basic_rates;
1646 rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain;
1648 ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC,
1649 sizeof(rxon_assoc), &rxon_assoc, NULL);
1657 int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel)
1662 u8 ctrl_chan_high = 0;
1663 struct iwl4965_channel_switch_cmd cmd = { 0 };
1664 const struct iwl_channel_info *ch_info;
1666 band = priv->band == IEEE80211_BAND_2GHZ;
1668 ch_info = iwl_get_channel_info(priv, priv->band, channel);
1670 is_fat = is_fat_channel(priv->staging_rxon.flags);
1673 (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
1677 cmd.expect_beacon = 0;
1678 cmd.channel = cpu_to_le16(channel);
1679 cmd.rxon_flags = priv->active_rxon.flags;
1680 cmd.rxon_filter_flags = priv->active_rxon.filter_flags;
1681 cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
1683 cmd.expect_beacon = is_channel_radar(ch_info);
1685 cmd.expect_beacon = 1;
1687 rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_fat,
1688 ctrl_chan_high, &cmd.tx_power);
1690 IWL_DEBUG_11H("error:%d fill txpower_tbl\n", rc);
1694 rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
1698 static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv)
1700 struct iwl4965_shared *s = priv->shared_virt;
1701 return le32_to_cpu(s->rb_closed) & 0xFFF;
1704 unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv,
1705 struct iwl_frame *frame, u8 rate)
1707 struct iwl4965_tx_beacon_cmd *tx_beacon_cmd;
1708 unsigned int frame_size;
1710 tx_beacon_cmd = &frame->u.beacon;
1711 memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
1713 tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
1714 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
1716 frame_size = iwl4965_fill_beacon_frame(priv,
1717 tx_beacon_cmd->frame,
1719 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
1721 BUG_ON(frame_size > MAX_MPDU_SIZE);
1722 tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
1724 if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP))
1725 tx_beacon_cmd->tx.rate_n_flags =
1726 iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK);
1728 tx_beacon_cmd->tx.rate_n_flags =
1729 iwl_hw_set_rate_n_flags(rate, 0);
1731 tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
1732 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK);
1733 return (sizeof(*tx_beacon_cmd) + frame_size);
1736 static int iwl4965_alloc_shared_mem(struct iwl_priv *priv)
1738 priv->shared_virt = pci_alloc_consistent(priv->pci_dev,
1739 sizeof(struct iwl4965_shared),
1740 &priv->shared_phys);
1741 if (!priv->shared_virt)
1744 memset(priv->shared_virt, 0, sizeof(struct iwl4965_shared));
1746 priv->rb_closed_offset = offsetof(struct iwl4965_shared, rb_closed);
1751 static void iwl4965_free_shared_mem(struct iwl_priv *priv)
1753 if (priv->shared_virt)
1754 pci_free_consistent(priv->pci_dev,
1755 sizeof(struct iwl4965_shared),
1761 * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
1763 static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
1764 struct iwl_tx_queue *txq,
1768 int txq_id = txq->q.id;
1769 struct iwl4965_shared *shared_data = priv->shared_virt;
1771 len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
1773 /* Set up byte count within first 256 entries */
1774 IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id].
1775 tfd_offset[txq->q.write_ptr], byte_cnt, len);
1777 /* If within first 64 entries, duplicate at end */
1778 if (txq->q.write_ptr < IWL49_MAX_WIN_SIZE)
1779 IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id].
1780 tfd_offset[IWL49_QUEUE_SIZE + txq->q.write_ptr],
1785 * sign_extend - Sign extend a value using specified bit as sign-bit
1787 * Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1
1788 * and bit0..2 is 001b which when sign extended to 1111111111111001b is -7.
1790 * @param oper value to sign extend
1791 * @param index 0 based bit index (0<=index<32) to sign bit
1793 static s32 sign_extend(u32 oper, int index)
1795 u8 shift = 31 - index;
1797 return (s32)(oper << shift) >> shift;
1801 * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
1802 * @statistics: Provides the temperature reading from the uCode
1804 * A return of <0 indicates bogus data in the statistics
1806 static int iwl4965_hw_get_temperature(const struct iwl_priv *priv)
1813 if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
1814 (priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)) {
1815 IWL_DEBUG_TEMP("Running FAT temperature calibration\n");
1816 R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
1817 R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
1818 R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
1819 R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
1821 IWL_DEBUG_TEMP("Running temperature calibration\n");
1822 R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
1823 R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
1824 R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
1825 R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]);
1829 * Temperature is only 23 bits, so sign extend out to 32.
1831 * NOTE If we haven't received a statistics notification yet
1832 * with an updated temperature, use R4 provided to us in the
1833 * "initialize" ALIVE response.
1835 if (!test_bit(STATUS_TEMPERATURE, &priv->status))
1836 vt = sign_extend(R4, 23);
1839 le32_to_cpu(priv->statistics.general.temperature), 23);
1841 IWL_DEBUG_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
1844 IWL_ERROR("Calibration conflict R1 == R3\n");
1848 /* Calculate temperature in degrees Kelvin, adjust by 97%.
1849 * Add offset to center the adjustment around 0 degrees Centigrade. */
1850 temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
1851 temperature /= (R3 - R1);
1852 temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
1854 IWL_DEBUG_TEMP("Calibrated temperature: %dK, %dC\n",
1855 temperature, KELVIN_TO_CELSIUS(temperature));
1860 /* Adjust Txpower only if temperature variance is greater than threshold. */
1861 #define IWL_TEMPERATURE_THRESHOLD 3
1864 * iwl4965_is_temp_calib_needed - determines if new calibration is needed
1866 * If the temperature changed has changed sufficiently, then a recalibration
1869 * Assumes caller will replace priv->last_temperature once calibration
1872 static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
1876 if (!test_bit(STATUS_STATISTICS, &priv->status)) {
1877 IWL_DEBUG_TEMP("Temperature not updated -- no statistics.\n");
1881 temp_diff = priv->temperature - priv->last_temperature;
1883 /* get absolute value */
1884 if (temp_diff < 0) {
1885 IWL_DEBUG_POWER("Getting cooler, delta %d, \n", temp_diff);
1886 temp_diff = -temp_diff;
1887 } else if (temp_diff == 0)
1888 IWL_DEBUG_POWER("Same temp, \n");
1890 IWL_DEBUG_POWER("Getting warmer, delta %d, \n", temp_diff);
1892 if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
1893 IWL_DEBUG_POWER("Thermal txpower calib not needed\n");
1897 IWL_DEBUG_POWER("Thermal txpower calib needed\n");
1902 static void iwl4965_temperature_calib(struct iwl_priv *priv)
1906 temp = iwl4965_hw_get_temperature(priv);
1910 if (priv->temperature != temp) {
1911 if (priv->temperature)
1912 IWL_DEBUG_TEMP("Temperature changed "
1913 "from %dC to %dC\n",
1914 KELVIN_TO_CELSIUS(priv->temperature),
1915 KELVIN_TO_CELSIUS(temp));
1917 IWL_DEBUG_TEMP("Temperature "
1918 "initialized to %dC\n",
1919 KELVIN_TO_CELSIUS(temp));
1922 priv->temperature = temp;
1923 set_bit(STATUS_TEMPERATURE, &priv->status);
1925 if (!priv->disable_tx_power_cal &&
1926 unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
1927 iwl4965_is_temp_calib_needed(priv))
1928 queue_work(priv->workqueue, &priv->txpower_work);
1932 * iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
1934 static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
1937 /* Simply stop the queue, but don't change any configuration;
1938 * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
1939 iwl_write_prph(priv,
1940 IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
1941 (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
1942 (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
1946 * txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE
1947 * priv->lock must be held by the caller
1949 static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
1950 u16 ssn_idx, u8 tx_fifo)
1954 if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
1955 (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
1956 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
1957 txq_id, IWL49_FIRST_AMPDU_QUEUE,
1958 IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
1962 ret = iwl_grab_nic_access(priv);
1966 iwl4965_tx_queue_stop_scheduler(priv, txq_id);
1968 iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
1970 priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
1971 priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
1972 /* supposes that ssn_idx is valid (!= 0xFFF) */
1973 iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
1975 iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
1976 iwl_txq_ctx_deactivate(priv, txq_id);
1977 iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
1979 iwl_release_nic_access(priv);
1985 * iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
1987 static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
1994 scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
1996 tbl_dw_addr = priv->scd_base_addr +
1997 IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
1999 tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
2002 tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
2004 tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
2006 iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
2013 * iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
2015 * NOTE: txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE,
2016 * i.e. it must be one of the higher queues used for aggregation
2018 static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
2019 int tx_fifo, int sta_id, int tid, u16 ssn_idx)
2021 unsigned long flags;
2025 if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
2026 (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
2027 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
2028 txq_id, IWL49_FIRST_AMPDU_QUEUE,
2029 IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
2033 ra_tid = BUILD_RAxTID(sta_id, tid);
2035 /* Modify device's station table to Tx this TID */
2036 iwl_sta_modify_enable_tid_tx(priv, sta_id, tid);
2038 spin_lock_irqsave(&priv->lock, flags);
2039 ret = iwl_grab_nic_access(priv);
2041 spin_unlock_irqrestore(&priv->lock, flags);
2045 /* Stop this Tx queue before configuring it */
2046 iwl4965_tx_queue_stop_scheduler(priv, txq_id);
2048 /* Map receiver-address / traffic-ID to this queue */
2049 iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
2051 /* Set this queue as a chain-building queue */
2052 iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
2054 /* Place first TFD at index corresponding to start sequence number.
2055 * Assumes that ssn_idx is valid (!= 0xFFF) */
2056 priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
2057 priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
2058 iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
2060 /* Set up Tx window size and frame limit for this queue */
2061 iwl_write_targ_mem(priv,
2062 priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
2063 (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
2064 IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
2066 iwl_write_targ_mem(priv, priv->scd_base_addr +
2067 IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
2068 (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS)
2069 & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
2071 iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
2073 /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
2074 iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
2076 iwl_release_nic_access(priv);
2077 spin_unlock_irqrestore(&priv->lock, flags);
2082 int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw,
2083 enum ieee80211_ampdu_mlme_action action,
2084 const u8 *addr, u16 tid, u16 *ssn)
2086 struct iwl_priv *priv = hw->priv;
2087 DECLARE_MAC_BUF(mac);
2089 IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n",
2090 print_mac(mac, addr), tid);
2092 if (!(priv->cfg->sku & IWL_SKU_N))
2096 case IEEE80211_AMPDU_RX_START:
2097 IWL_DEBUG_HT("start Rx\n");
2098 return iwl_rx_agg_start(priv, addr, tid, *ssn);
2099 case IEEE80211_AMPDU_RX_STOP:
2100 IWL_DEBUG_HT("stop Rx\n");
2101 return iwl_rx_agg_stop(priv, addr, tid);
2102 case IEEE80211_AMPDU_TX_START:
2103 IWL_DEBUG_HT("start Tx\n");
2104 return iwl_tx_agg_start(priv, addr, tid, ssn);
2105 case IEEE80211_AMPDU_TX_STOP:
2106 IWL_DEBUG_HT("stop Tx\n");
2107 return iwl_tx_agg_stop(priv, addr, tid);
2109 IWL_DEBUG_HT("unknown\n");
2116 static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
2120 return (u16) sizeof(struct iwl4965_rxon_cmd);
2126 static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
2128 struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data;
2129 addsta->mode = cmd->mode;
2130 memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
2131 memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
2132 addsta->station_flags = cmd->station_flags;
2133 addsta->station_flags_msk = cmd->station_flags_msk;
2134 addsta->tid_disable_tx = cmd->tid_disable_tx;
2135 addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
2136 addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
2137 addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
2138 addsta->reserved1 = __constant_cpu_to_le16(0);
2139 addsta->reserved2 = __constant_cpu_to_le32(0);
2141 return (u16)sizeof(struct iwl4965_addsta_cmd);
2144 static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
2146 return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
2150 * iwl4965_tx_status_reply_tx - Handle Tx rspnse for frames in aggregation queue
2152 static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
2153 struct iwl_ht_agg *agg,
2154 struct iwl4965_tx_resp *tx_resp,
2155 int txq_id, u16 start_idx)
2158 struct agg_tx_status *frame_status = tx_resp->u.agg_status;
2159 struct ieee80211_tx_info *info = NULL;
2160 struct ieee80211_hdr *hdr = NULL;
2161 u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
2164 if (agg->wait_for_ba)
2165 IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n");
2167 agg->frame_count = tx_resp->frame_count;
2168 agg->start_idx = start_idx;
2169 agg->rate_n_flags = rate_n_flags;
2172 /* # frames attempted by Tx command */
2173 if (agg->frame_count == 1) {
2174 /* Only one frame was attempted; no block-ack will arrive */
2175 status = le16_to_cpu(frame_status[0].status);
2178 /* FIXME: code repetition */
2179 IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
2180 agg->frame_count, agg->start_idx, idx);
2182 info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
2183 info->status.retry_count = tx_resp->failure_frame;
2184 info->flags &= ~IEEE80211_TX_CTL_AMPDU;
2185 info->flags |= iwl_is_tx_success(status)?
2186 IEEE80211_TX_STAT_ACK : 0;
2187 iwl_hwrate_to_tx_control(priv, rate_n_flags, info);
2188 /* FIXME: code repetition end */
2190 IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n",
2191 status & 0xff, tx_resp->failure_frame);
2192 IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
2194 agg->wait_for_ba = 0;
2196 /* Two or more frames were attempted; expect block-ack */
2198 int start = agg->start_idx;
2200 /* Construct bit-map of pending frames within Tx window */
2201 for (i = 0; i < agg->frame_count; i++) {
2203 status = le16_to_cpu(frame_status[i].status);
2204 seq = le16_to_cpu(frame_status[i].sequence);
2205 idx = SEQ_TO_INDEX(seq);
2206 txq_id = SEQ_TO_QUEUE(seq);
2208 if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
2209 AGG_TX_STATE_ABORT_MSK))
2212 IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
2213 agg->frame_count, txq_id, idx);
2215 hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
2217 sc = le16_to_cpu(hdr->seq_ctrl);
2218 if (idx != (SEQ_TO_SN(sc) & 0xff)) {
2219 IWL_ERROR("BUG_ON idx doesn't match seq control"
2220 " idx=%d, seq_idx=%d, seq=%d\n",
2226 IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
2227 i, idx, SEQ_TO_SN(sc));
2231 sh = (start - idx) + 0xff;
2232 bitmap = bitmap << sh;
2235 } else if (sh < -64)
2236 sh = 0xff - (start - idx);
2240 bitmap = bitmap << sh;
2243 bitmap |= (1 << sh);
2244 IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n",
2245 start, (u32)(bitmap & 0xFFFFFFFF));
2248 agg->bitmap = bitmap;
2249 agg->start_idx = start;
2250 IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
2251 agg->frame_count, agg->start_idx,
2252 (unsigned long long)agg->bitmap);
2255 agg->wait_for_ba = 1;
2261 * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
2263 static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
2264 struct iwl_rx_mem_buffer *rxb)
2266 struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
2267 u16 sequence = le16_to_cpu(pkt->hdr.sequence);
2268 int txq_id = SEQ_TO_QUEUE(sequence);
2269 int index = SEQ_TO_INDEX(sequence);
2270 struct iwl_tx_queue *txq = &priv->txq[txq_id];
2271 struct ieee80211_tx_info *info;
2272 struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
2273 u32 status = le32_to_cpu(tx_resp->u.status);
2274 int tid = MAX_TID_COUNT, sta_id = IWL_INVALID_STATION;
2276 struct ieee80211_hdr *hdr;
2279 if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
2280 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
2281 "is out of range [0-%d] %d %d\n", txq_id,
2282 index, txq->q.n_bd, txq->q.write_ptr,
2287 info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
2288 memset(&info->status, 0, sizeof(info->status));
2290 hdr = iwl_tx_queue_get_hdr(priv, txq_id, index);
2291 fc = hdr->frame_control;
2292 if (ieee80211_is_data_qos(fc)) {
2293 qc = ieee80211_get_qos_ctl(hdr);
2297 sta_id = iwl_get_ra_sta_id(priv, hdr);
2298 if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) {
2299 IWL_ERROR("Station not known\n");
2303 if (txq->sched_retry) {
2304 const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp);
2305 struct iwl_ht_agg *agg = NULL;
2310 agg = &priv->stations[sta_id].tid[tid].agg;
2312 iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
2314 /* check if BAR is needed */
2315 if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
2316 info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
2318 if (txq->q.read_ptr != (scd_ssn & 0xff)) {
2320 index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
2321 IWL_DEBUG_TX_REPLY("Retry scheduler reclaim scd_ssn "
2322 "%d index %d\n", scd_ssn , index);
2323 freed = iwl_tx_queue_reclaim(priv, txq_id, index);
2324 priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
2326 if (iwl_queue_space(&txq->q) > txq->q.low_mark &&
2327 txq_id >= 0 && priv->mac80211_registered &&
2328 agg->state != IWL_EMPTYING_HW_QUEUE_DELBA) {
2329 /* calculate mac80211 ampdu sw queue to wake */
2330 ampdu_q = txq_id - IWL49_FIRST_AMPDU_QUEUE +
2332 if (agg->state == IWL_AGG_OFF)
2333 ieee80211_wake_queue(priv->hw, txq_id);
2335 ieee80211_wake_queue(priv->hw, ampdu_q);
2337 iwl_txq_check_empty(priv, sta_id, tid, txq_id);
2340 info->status.retry_count = tx_resp->failure_frame;
2342 iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0;
2343 iwl_hwrate_to_tx_control(priv,
2344 le32_to_cpu(tx_resp->rate_n_flags),
2347 IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) rate_n_flags "
2348 "0x%x retries %d\n", txq_id,
2349 iwl_get_tx_fail_reason(status),
2350 status, le32_to_cpu(tx_resp->rate_n_flags),
2351 tx_resp->failure_frame);
2353 IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
2356 int freed = iwl_tx_queue_reclaim(priv, txq_id, index);
2357 if (tid != MAX_TID_COUNT)
2358 priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
2359 if (iwl_queue_space(&txq->q) > txq->q.low_mark &&
2360 (txq_id >= 0) && priv->mac80211_registered)
2361 ieee80211_wake_queue(priv->hw, txq_id);
2362 if (tid != MAX_TID_COUNT)
2363 iwl_txq_check_empty(priv, sta_id, tid, txq_id);
2367 if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
2368 IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n");
2372 /* Set up 4965-specific Rx frame reply handlers */
2373 static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
2375 /* Legacy Rx frames */
2376 priv->rx_handlers[REPLY_RX] = iwl_rx_reply_rx;
2378 priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx;
2381 static void iwl4965_setup_deferred_work(struct iwl_priv *priv)
2383 INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
2386 static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
2388 cancel_work_sync(&priv->txpower_work);
2392 static struct iwl_hcmd_ops iwl4965_hcmd = {
2393 .rxon_assoc = iwl4965_send_rxon_assoc,
2396 static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
2397 .get_hcmd_size = iwl4965_get_hcmd_size,
2398 .build_addsta_hcmd = iwl4965_build_addsta_hcmd,
2399 .chain_noise_reset = iwl4965_chain_noise_reset,
2400 .gain_computation = iwl4965_gain_computation,
2401 .rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag,
2404 static struct iwl_lib_ops iwl4965_lib = {
2405 .set_hw_params = iwl4965_hw_set_hw_params,
2406 .alloc_shared_mem = iwl4965_alloc_shared_mem,
2407 .free_shared_mem = iwl4965_free_shared_mem,
2408 .shared_mem_rx_idx = iwl4965_shared_mem_rx_idx,
2409 .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl,
2410 .txq_set_sched = iwl4965_txq_set_sched,
2411 .txq_agg_enable = iwl4965_txq_agg_enable,
2412 .txq_agg_disable = iwl4965_txq_agg_disable,
2413 .rx_handler_setup = iwl4965_rx_handler_setup,
2414 .setup_deferred_work = iwl4965_setup_deferred_work,
2415 .cancel_deferred_work = iwl4965_cancel_deferred_work,
2416 .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr,
2417 .alive_notify = iwl4965_alive_notify,
2418 .init_alive_start = iwl4965_init_alive_start,
2419 .load_ucode = iwl4965_load_bsm,
2421 .init = iwl4965_apm_init,
2422 .reset = iwl4965_apm_reset,
2423 .stop = iwl4965_apm_stop,
2424 .config = iwl4965_nic_config,
2425 .set_pwr_src = iwl4965_set_pwr_src,
2428 .regulatory_bands = {
2429 EEPROM_REGULATORY_BAND_1_CHANNELS,
2430 EEPROM_REGULATORY_BAND_2_CHANNELS,
2431 EEPROM_REGULATORY_BAND_3_CHANNELS,
2432 EEPROM_REGULATORY_BAND_4_CHANNELS,
2433 EEPROM_REGULATORY_BAND_5_CHANNELS,
2434 EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS,
2435 EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS
2437 .verify_signature = iwlcore_eeprom_verify_signature,
2438 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
2439 .release_semaphore = iwlcore_eeprom_release_semaphore,
2440 .check_version = iwl4965_eeprom_check_version,
2441 .query_addr = iwlcore_eeprom_query_addr,
2443 .set_power = iwl4965_set_power,
2444 .send_tx_power = iwl4965_send_tx_power,
2445 .update_chain_flags = iwl4965_update_chain_flags,
2446 .temperature = iwl4965_temperature_calib,
2449 static struct iwl_ops iwl4965_ops = {
2450 .lib = &iwl4965_lib,
2451 .hcmd = &iwl4965_hcmd,
2452 .utils = &iwl4965_hcmd_utils,
2455 struct iwl_cfg iwl4965_agn_cfg = {
2457 .fw_name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode",
2458 .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
2459 .eeprom_size = IWL4965_EEPROM_IMG_SIZE,
2460 .ops = &iwl4965_ops,
2461 .mod_params = &iwl4965_mod_params,
2464 /* Module firmware */
2465 MODULE_FIRMWARE("iwlwifi-4965" IWL4965_UCODE_API ".ucode");
2467 module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
2468 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
2469 module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
2470 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
2471 module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
2472 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
2473 module_param_named(debug, iwl4965_mod_params.debug, int, 0444);
2474 MODULE_PARM_DESC(debug, "debug output mask");
2476 disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444);
2477 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
2479 module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444);
2480 MODULE_PARM_DESC(queues_num, "number of hw queues.");
2482 module_param_named(qos_enable, iwl4965_mod_params.enable_qos, int, 0444);
2483 MODULE_PARM_DESC(qos_enable, "enable all QoS functionality");
2485 module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, 0444);
2486 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
2487 module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444);
2488 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
2490 module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444);
2491 MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error");