git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-s3c2410.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  * (C) Copyright 2002 Hewlett-Packard Company
   7  *
   8  * USB Bus Glue for Samsung S3C2410
   9  *
  10  * Written by Christopher Hoover <ch@hpl.hp.com>
  11  * Based on fragments of previous driver by Rusell King et al.
  12  *
  13  * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
  14  *      by Ben Dooks, <ben@simtec.co.uk>
  15  *      Copyright (C) 2004 Simtec Electronics
  16  *
  17  * Thanks to basprog@mail.ru for updates to newer kernels
  18  *
  19  * This file is licenced under the GPL.
  20 */
  21
  22 #include <asm/hardware.h>
  23 #include <asm/hardware/clock.h>
  24 #include <asm/arch/usb-control.h>
  25
  26 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
  27
  28 /* clock device associated with the hcd */
  29
  30 static struct clk *clk;
  31
  32 /* forward definitions */
  33
  34 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
  35
  36 /* conversion functions */
  37
  38 struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
  39 {
  40         return hcd->self.controller->platform_data;
  41 }
  42
  43 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
  44 {
  45         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  46
  47         dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
  48         clk_enable(clk);
  49
  50         if (info != NULL) {
  51                 info->hcd       = hcd;
  52                 info->report_oc = s3c2410_hcd_oc;
  53
  54                 if (info->enable_oc != NULL) {
  55                         (info->enable_oc)(info, 1);
  56                 }
  57         }
  58 }
  59
  60 static void s3c2410_stop_hc(struct platform_device *dev)
  61 {
  62         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  63
  64         dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
  65
  66         if (info != NULL) {
  67                 info->report_oc = NULL;
  68                 info->hcd       = NULL;
  69
  70                 if (info->enable_oc != NULL) {
  71                         (info->enable_oc)(info, 0);
  72                 }
  73         }
  74
  75         clk_disable(clk);
  76 }
  77
  78 /* ohci_s3c2410_hub_status_data
  79  *
  80  * update the status data from the hub with anything that
  81  * has been detected by our system
  82 */
  83
  84 static int
  85 ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
  86 {
  87         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
  88         struct s3c2410_hcd_port *port;
  89         int orig;
  90         int portno;
  91
  92         orig  = ohci_hub_status_data (hcd, buf);
  93
  94         if (info == NULL)
  95                 return orig;
  96
  97         port = &info->port[0];
  98
  99         /* mark any changed port as changed */
 100
 101         for (portno = 0; portno < 2; port++, portno++) {
 102                 if (port->oc_changed == 1 &&
 103                     port->flags & S3C_HCDFLG_USED) {
 104                         dev_dbg(hcd->self.controller,
 105                                 "oc change on port %d\n", portno);
 106
 107                         if (orig < 1)
 108                                 orig = 1;
 109
 110                         buf[0] |= 1<<(portno+1);
 111                 }
 112         }
 113
 114         return orig;
 115 }
 116
 117 /* s3c2410_usb_set_power
 118  *
 119  * configure the power on a port, by calling the platform device
 120  * routine registered with the platform device
 121 */
 122
 123 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
 124                                   int port, int to)
 125 {
 126         if (info == NULL)
 127                 return;
 128
 129         if (info->power_control != NULL) {
 130                 info->port[port-1].power = to;
 131                 (info->power_control)(port-1, to);
 132         }
 133 }
 134
 135 /* ohci_s3c2410_hub_control
 136  *
 137  * look at control requests to the hub, and see if we need
 138  * to take any action or over-ride the results from the
 139  * request.
 140 */
 141
 142 static int ohci_s3c2410_hub_control (
 143         struct usb_hcd  *hcd,
 144         u16             typeReq,
 145         u16             wValue,
 146         u16             wIndex,
 147         char            *buf,
 148         u16             wLength)
 149 {
 150         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
 151         struct usb_hub_descriptor *desc;
 152         int ret = -EINVAL;
 153         u32 *data = (u32 *)buf;
 154
 155         dev_dbg(hcd->self.controller,
 156                 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
 157                 hcd, typeReq, wValue, wIndex, buf, wLength);
 158
 159         /* if we are only an humble host without any special capabilites
 160          * process the request straight away and exit */
 161
 162         if (info == NULL) {
 163                 ret = ohci_hub_control(hcd, typeReq, wValue,
 164                                        wIndex, buf, wLength);
 165                 goto out;
 166         }
 167
 168         /* check the request to see if it needs handling */
 169
 170         switch (typeReq) {
 171         case SetPortFeature:
 172                 if (wValue == USB_PORT_FEAT_POWER) {
 173                         dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
 174                         s3c2410_usb_set_power(info, wIndex, 1);
 175                         goto out;
 176                 }
 177                 break;
 178
 179         case ClearPortFeature:
 180                 switch (wValue) {
 181                 case USB_PORT_FEAT_C_OVER_CURRENT:
 182                         dev_dbg(hcd->self.controller,
 183                                 "ClearPortFeature: C_OVER_CURRENT\n");
 184
 185                         if (valid_port(wIndex)) {
 186                                 info->port[wIndex-1].oc_changed = 0;
 187                                 info->port[wIndex-1].oc_status = 0;
 188                         }
 189
 190                         goto out;
 191
 192                 case USB_PORT_FEAT_OVER_CURRENT:
 193                         dev_dbg(hcd->self.controller,
 194                                 "ClearPortFeature: OVER_CURRENT\n");
 195
 196                         if (valid_port(wIndex)) {
 197                                 info->port[wIndex-1].oc_status = 0;
 198                         }
 199
 200                         goto out;
 201
 202                 case USB_PORT_FEAT_POWER:
 203                         dev_dbg(hcd->self.controller,
 204                                 "ClearPortFeature: POWER\n");
 205
 206                         if (valid_port(wIndex)) {
 207                                 s3c2410_usb_set_power(info, wIndex, 0);
 208                                 return 0;
 209                         }
 210                 }
 211                 break;
 212         }
 213
 214         ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
 215         if (ret)
 216                 goto out;
 217
 218         switch (typeReq) {
 219         case GetHubDescriptor:
 220
 221                 /* update the hub's descriptor */
 222
 223                 desc = (struct usb_hub_descriptor *)buf;
 224
 225                 if (info->power_control == NULL)
 226                         return ret;
 227
 228                 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
 229                         desc->wHubCharacteristics);
 230
 231                 /* remove the old configurations for power-switching, and
 232                  * over-current protection, and insert our new configuration
 233                  */
 234
 235                 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
 236                 desc->wHubCharacteristics |= cpu_to_le16(0x0001);
 237
 238                 if (info->enable_oc) {
 239                         desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
 240                         desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
 241                 }
 242
 243                 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
 244                         desc->wHubCharacteristics);
 245
 246                 return ret;
 247
 248         case GetPortStatus:
 249                 /* check port status */
 250
 251                 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
 252
 253                 if (valid_port(wIndex)) {
 254                         if (info->port[wIndex-1].oc_changed) {
 255                                 *data |= cpu_to_le32(RH_PS_OCIC);
 256                         }
 257
 258                         if (info->port[wIndex-1].oc_status) {
 259                                 *data |= cpu_to_le32(RH_PS_POCI);
 260                         }
 261                 }
 262         }
 263
 264  out:
 265         return ret;
 266 }
 267
 268 /* s3c2410_hcd_oc
 269  *
 270  * handle an over-current report
 271 */
 272
 273 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
 274 {
 275         struct s3c2410_hcd_port *port;
 276         struct usb_hcd *hcd;
 277         unsigned long flags;
 278         int portno;
 279
 280         if (info == NULL)
 281                 return;
 282
 283         port = &info->port[0];
 284         hcd = info->hcd;
 285
 286         local_irq_save(flags);
 287
 288         for (portno = 0; portno < 2; port++, portno++) {
 289                 if (port_oc & (1<<portno) &&
 290                     port->flags & S3C_HCDFLG_USED) {
 291                         port->oc_status = 1;
 292                         port->oc_changed = 1;
 293
 294                         /* ok, once over-current is detected,
 295                            the port needs to be powered down */
 296                         s3c2410_usb_set_power(info, portno+1, 0);
 297                 }
 298         }
 299
 300         local_irq_restore(flags);
 301 }
 302
 303 /* may be called without controller electrically present */
 304 /* may be called with controller, bus, and devices active */
 305
 306 /*
 307  * usb_hcd_s3c2410_remove - shutdown processing for HCD
 308  * @dev: USB Host Controller being removed
 309  * Context: !in_interrupt()
 310  *
 311  * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
 312  * the HCD's stop() method.  It is always called from a thread
 313  * context, normally "rmmod", "apmd", or something similar.
 314  *
 315 */
 316
 317 void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
 318 {
 319         usb_remove_hcd(hcd);
 320         s3c2410_stop_hc(dev);
 321         iounmap(hcd->regs);
 322         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 323         usb_put_hcd(hcd);
 324 }
 325
 326 /**
 327  * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
 328  * Context: !in_interrupt()
 329  *
 330  * Allocates basic resources for this USB host controller, and
 331  * then invokes the start() method for the HCD associated with it
 332  * through the hotplug entry's driver_data.
 333  *
 334  */
 335 int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 336                            struct platform_device *dev)
 337 {
 338         struct usb_hcd *hcd = NULL;
 339         int retval;
 340
 341         s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
 342         s3c2410_usb_set_power(dev->dev.platform_data, 2, 1);
 343
 344         hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
 345         if (hcd == NULL)
 346                 return -ENOMEM;
 347
 348         hcd->rsrc_start = dev->resource[0].start;
 349         hcd->rsrc_len   = dev->resource[0].end - dev->resource[0].start + 1;
 350
 351         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 352                 dev_err(&dev->dev, "request_mem_region failed");
 353                 retval = -EBUSY;
 354                 goto err0;
 355         }
 356
 357         clk = clk_get(NULL, "usb-host");
 358         if (IS_ERR(clk)) {
 359                 dev_err(&dev->dev, "cannot get usb-host clock\n");
 360                 retval = -ENOENT;
 361                 goto err1;
 362         }
 363
 364         clk_use(clk);
 365         s3c2410_start_hc(dev, hcd);
 366
 367         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 368         if (!hcd->regs) {
 369                 dev_err(&dev->dev, "ioremap failed\n");
 370                 retval = -ENOMEM;
 371                 goto err2;
 372         }
 373
 374         ohci_hcd_init(hcd_to_ohci(hcd));
 375
 376         retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
 377         if (retval != 0)
 378                 goto err2;
 379
 380         return 0;
 381
 382  err2:
 383         s3c2410_stop_hc(dev);
 384         iounmap(hcd->regs);
 385         clk_unuse(clk);
 386         clk_put(clk);
 387
 388  err1:
 389         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 390
 391  err0:
 392         usb_put_hcd(hcd);
 393         return retval;
 394 }
 395
 396 /*-------------------------------------------------------------------------*/
 397
 398 static int
 399 ohci_s3c2410_start (struct usb_hcd *hcd)
 400 {
 401         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 402         int ret;
 403
 404         if ((ret = ohci_init(ohci)) < 0)
 405                 return ret;
 406
 407         if ((ret = ohci_run (ohci)) < 0) {
 408                 err ("can't start %s", hcd->self.bus_name);
 409                 ohci_stop (hcd);
 410                 return ret;
 411         }
 412
 413         return 0;
 414 }
 415
 416
 417 static const struct hc_driver ohci_s3c2410_hc_driver = {
 418         .description =          hcd_name,
 419         .product_desc =         "S3C24XX OHCI",
 420         .hcd_priv_size =        sizeof(struct ohci_hcd),
 421
 422         /*
 423          * generic hardware linkage
 424          */
 425         .irq =                  ohci_irq,
 426         .flags =                HCD_USB11 | HCD_MEMORY,
 427
 428         /*
 429          * basic lifecycle operations
 430          */
 431         .start =                ohci_s3c2410_start,
 432         .stop =                 ohci_stop,
 433
 434         /*
 435          * managing i/o requests and associated device resources
 436          */
 437         .urb_enqueue =          ohci_urb_enqueue,
 438         .urb_dequeue =          ohci_urb_dequeue,
 439         .endpoint_disable =     ohci_endpoint_disable,
 440
 441         /*
 442          * scheduling support
 443          */
 444         .get_frame_number =     ohci_get_frame,
 445
 446         /*
 447          * root hub support
 448          */
 449         .hub_status_data =      ohci_s3c2410_hub_status_data,
 450         .hub_control =          ohci_s3c2410_hub_control,
 451
 452 #if defined(CONFIG_USB_SUSPEND) && 0
 453         .hub_suspend =          ohci_hub_suspend,
 454         .hub_resume =           ohci_hub_resume,
 455 #endif
 456 };
 457
 458 /* device driver */
 459
 460 static int ohci_hcd_s3c2410_drv_probe(struct device *dev)
 461 {
 462         struct platform_device *pdev = to_platform_device(dev);
 463         return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
 464 }
 465
 466 static int ohci_hcd_s3c2410_drv_remove(struct device *dev)
 467 {
 468         struct platform_device *pdev = to_platform_device(dev);
 469         struct usb_hcd *hcd = dev_get_drvdata(dev);
 470
 471         usb_hcd_s3c2410_remove(hcd, pdev);
 472         return 0;
 473 }
 474
 475 static struct device_driver ohci_hcd_s3c2410_driver = {
 476         .name           = "s3c2410-ohci",
 477         .bus            = &platform_bus_type,
 478         .probe          = ohci_hcd_s3c2410_drv_probe,
 479         .remove         = ohci_hcd_s3c2410_drv_remove,
 480         /*.suspend      = ohci_hcd_s3c2410_drv_suspend, */
 481         /*.resume       = ohci_hcd_s3c2410_drv_resume, */
 482 };
 483
 484 static int __init ohci_hcd_s3c2410_init (void)
 485 {
 486         return driver_register(&ohci_hcd_s3c2410_driver);
 487 }
 488
 489 static void __exit ohci_hcd_s3c2410_cleanup (void)
 490 {
 491         driver_unregister(&ohci_hcd_s3c2410_driver);
 492 }
 493
 494 module_init (ohci_hcd_s3c2410_init);
 495 module_exit (ohci_hcd_s3c2410_cleanup);