Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

[linux-2.6] / arch / xtensa / kernel / entry.S

/*
 * arch/xtensa/kernel/entry.S
 *
 * Low-level exception handling
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 2004-2007 by Tensilica Inc.
 *
 * Chris Zankel <chris@zankel.net>
 *
 */

#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/processor.h>
#include <asm/thread_info.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/ptrace.h>
#include <asm/current.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/signal.h>
#include <asm/tlbflush.h>
#include <asm/variant/tie-asm.h>

/* Unimplemented features. */

#undef KERNEL_STACK_OVERFLOW_CHECK
#undef PREEMPTIBLE_KERNEL
#undef ALLOCA_EXCEPTION_IN_IRAM

/* Not well tested.
 *
 * - fast_coprocessor
 */

/*
 * Macro to find first bit set in WINDOWBASE from the left + 1
 *
 * 100....0 -> 1
 * 010....0 -> 2
 * 000....1 -> WSBITS
 */

        .macro ffs_ws bit mask

#if XCHAL_HAVE_NSA
        nsau    \bit, \mask                     # 32-WSBITS ... 31 (32 iff 0)
        addi    \bit, \bit, WSBITS - 32 + 1     # uppest bit set -> return 1
#else
        movi    \bit, WSBITS
#if WSBITS > 16
        _bltui  \mask, 0x10000, 99f
        addi    \bit, \bit, -16
        extui   \mask, \mask, 16, 16
#endif
#if WSBITS > 8
99:     _bltui  \mask, 0x100, 99f
        addi    \bit, \bit, -8
        srli    \mask, \mask, 8
#endif
99:     _bltui  \mask, 0x10, 99f
        addi    \bit, \bit, -4
        srli    \mask, \mask, 4
99:     _bltui  \mask, 0x4, 99f
        addi    \bit, \bit, -2
        srli    \mask, \mask, 2
99:     _bltui  \mask, 0x2, 99f
        addi    \bit, \bit, -1
99:

#endif
        .endm

/* ----------------- DEFAULT FIRST LEVEL EXCEPTION HANDLERS ----------------- */

/*
 * First-level exception handler for user exceptions.
 * Save some special registers, extra states and all registers in the AR
 * register file that were in use in the user task, and jump to the common
 * exception code.
 * We save SAR (used to calculate WMASK), and WB and WS (we don't have to
 * save them for kernel exceptions).
 *
 * Entry condition for user_exception:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original value in depc
 *   a3:        dispatch table
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave1:  a3
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 *
 * Entry condition for _user_exception:
 *
 *   a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
 *   excsave has been restored, and
 *   stack pointer (a1) has been set.
 *
 * Note: _user_exception might be at an odd adress. Don't use call0..call12
 */

ENTRY(user_exception)

        /* Save a2, a3, and depc, restore excsave_1 and set SP. */

        xsr     a3, EXCSAVE_1
        rsr     a0, DEPC
        s32i    a1, a2, PT_AREG1
        s32i    a0, a2, PT_AREG2
        s32i    a3, a2, PT_AREG3
        mov     a1, a2

        .globl _user_exception
_user_exception:

        /* Save SAR and turn off single stepping */

        movi    a2, 0
        rsr     a3, SAR
        xsr     a2, ICOUNTLEVEL
        s32i    a3, a1, PT_SAR
        s32i    a2, a1, PT_ICOUNTLEVEL

        /* Rotate ws so that the current windowbase is at bit0. */
        /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */

        rsr     a2, WINDOWBASE
        rsr     a3, WINDOWSTART
        ssr     a2
        s32i    a2, a1, PT_WINDOWBASE
        s32i    a3, a1, PT_WINDOWSTART
        slli    a2, a3, 32-WSBITS
        src     a2, a3, a2
        srli    a2, a2, 32-WSBITS
        s32i    a2, a1, PT_WMASK        # needed for restoring registers

        /* Save only live registers. */

        _bbsi.l a2, 1, 1f
        s32i    a4, a1, PT_AREG4
        s32i    a5, a1, PT_AREG5
        s32i    a6, a1, PT_AREG6
        s32i    a7, a1, PT_AREG7
        _bbsi.l a2, 2, 1f
        s32i    a8, a1, PT_AREG8
        s32i    a9, a1, PT_AREG9
        s32i    a10, a1, PT_AREG10
        s32i    a11, a1, PT_AREG11
        _bbsi.l a2, 3, 1f
        s32i    a12, a1, PT_AREG12
        s32i    a13, a1, PT_AREG13
        s32i    a14, a1, PT_AREG14
        s32i    a15, a1, PT_AREG15
        _bnei   a2, 1, 1f               # only one valid frame?

        /* Only one valid frame, skip saving regs. */

        j       2f

        /* Save the remaining registers.
         * We have to save all registers up to the first '1' from
         * the right, except the current frame (bit 0).
         * Assume a2 is:  001001000110001
         * All register frames starting from the top field to the marked '1'
         * must be saved.
         */

1:      addi    a3, a2, -1              # eliminate '1' in bit 0: yyyyxxww0
        neg     a3, a3                  # yyyyxxww0 -> YYYYXXWW1+1
        and     a3, a3, a2              # max. only one bit is set

        /* Find number of frames to save */

        ffs_ws  a0, a3                  # number of frames to the '1' from left

        /* Store information into WMASK:
         * bits 0..3: xxx1 masked lower 4 bits of the rotated windowstart,
         * bits 4...: number of valid 4-register frames
         */

        slli    a3, a0, 4               # number of frames to save in bits 8..4
        extui   a2, a2, 0, 4            # mask for the first 16 registers
        or      a2, a3, a2
        s32i    a2, a1, PT_WMASK        # needed when we restore the reg-file

        /* Save 4 registers at a time */

1:      rotw    -1
        s32i    a0, a5, PT_AREG_END - 16
        s32i    a1, a5, PT_AREG_END - 12
        s32i    a2, a5, PT_AREG_END - 8
        s32i    a3, a5, PT_AREG_END - 4
        addi    a0, a4, -1
        addi    a1, a5, -16
        _bnez   a0, 1b

        /* WINDOWBASE still in SAR! */

        rsr     a2, SAR                 # original WINDOWBASE
        movi    a3, 1
        ssl     a2
        sll     a3, a3
        wsr     a3, WINDOWSTART         # set corresponding WINDOWSTART bit
        wsr     a2, WINDOWBASE          # and WINDOWSTART
        rsync

        /* We are back to the original stack pointer (a1) */

2:      /* Now, jump to the common exception handler. */

        j       common_exception


/*
 * First-level exit handler for kernel exceptions
 * Save special registers and the live window frame.
 * Note: Even though we changes the stack pointer, we don't have to do a
 *       MOVSP here, as we do that when we return from the exception.
 *       (See comment in the kernel exception exit code)
 *
 * Entry condition for kernel_exception:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        dispatch table
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: a3
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 *
 * Entry condition for _kernel_exception:
 *
 *   a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
 *   excsave has been restored, and
 *   stack pointer (a1) has been set.
 *
 * Note: _kernel_exception might be at an odd adress. Don't use call0..call12
 */

ENTRY(kernel_exception)

        /* Save a0, a2, a3, DEPC and set SP. */

        xsr     a3, EXCSAVE_1           # restore a3, excsave_1
        rsr     a0, DEPC                # get a2
        s32i    a1, a2, PT_AREG1
        s32i    a0, a2, PT_AREG2
        s32i    a3, a2, PT_AREG3
        mov     a1, a2

        .globl _kernel_exception
_kernel_exception:

        /* Save SAR and turn off single stepping */

        movi    a2, 0
        rsr     a3, SAR
        xsr     a2, ICOUNTLEVEL
        s32i    a3, a1, PT_SAR
        s32i    a2, a1, PT_ICOUNTLEVEL

        /* Rotate ws so that the current windowbase is at bit0. */
        /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */

        rsr     a2, WINDOWBASE          # don't need to save these, we only
        rsr     a3, WINDOWSTART         # need shifted windowstart: windowmask
        ssr     a2
        slli    a2, a3, 32-WSBITS
        src     a2, a3, a2
        srli    a2, a2, 32-WSBITS
        s32i    a2, a1, PT_WMASK        # needed for kernel_exception_exit

        /* Save only the live window-frame */

        _bbsi.l a2, 1, 1f
        s32i    a4, a1, PT_AREG4
        s32i    a5, a1, PT_AREG5
        s32i    a6, a1, PT_AREG6
        s32i    a7, a1, PT_AREG7
        _bbsi.l a2, 2, 1f
        s32i    a8, a1, PT_AREG8
        s32i    a9, a1, PT_AREG9
        s32i    a10, a1, PT_AREG10
        s32i    a11, a1, PT_AREG11
        _bbsi.l a2, 3, 1f
        s32i    a12, a1, PT_AREG12
        s32i    a13, a1, PT_AREG13
        s32i    a14, a1, PT_AREG14
        s32i    a15, a1, PT_AREG15

1:

#ifdef KERNEL_STACK_OVERFLOW_CHECK

        /*  Stack overflow check, for debugging  */
        extui   a2, a1, TASK_SIZE_BITS,XX
        movi    a3, SIZE??
        _bge    a2, a3, out_of_stack_panic

#endif

/*
 * This is the common exception handler.
 * We get here from the user exception handler or simply by falling through
 * from the kernel exception handler.
 * Save the remaining special registers, switch to kernel mode, and jump
 * to the second-level exception handler.
 *
 */

common_exception:

        /* Save some registers, disable loops and clear the syscall flag. */

        rsr     a2, DEBUGCAUSE
        rsr     a3, EPC_1
        s32i    a2, a1, PT_DEBUGCAUSE
        s32i    a3, a1, PT_PC

        movi    a2, -1
        rsr     a3, EXCVADDR
        s32i    a2, a1, PT_SYSCALL
        movi    a2, 0
        s32i    a3, a1, PT_EXCVADDR
        xsr     a2, LCOUNT
        s32i    a2, a1, PT_LCOUNT

        /* It is now save to restore the EXC_TABLE_FIXUP variable. */

        rsr     a0, EXCCAUSE
        movi    a3, 0
        rsr     a2, EXCSAVE_1
        s32i    a0, a1, PT_EXCCAUSE
        s32i    a3, a2, EXC_TABLE_FIXUP

        /* All unrecoverable states are saved on stack, now, and a1 is valid,
         * so we can allow exceptions and interrupts (*) again.
         * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X)
         *
         * (*) We only allow interrupts if PS.INTLEVEL was not set to 1 before
         *     (interrupts disabled) and if this exception is not an interrupt.
         */

        rsr     a3, PS
        addi    a0, a0, -4
        movi    a2, 1
        extui   a3, a3, 0, 1            # a3 = PS.INTLEVEL[0]
        moveqz  a3, a2, a0              # a3 = 1 iff interrupt exception
        movi    a2, 1 << PS_WOE_BIT
        or      a3, a3, a2
        rsr     a0, EXCCAUSE
        xsr     a3, PS

        s32i    a3, a1, PT_PS           # save ps

        /* Save LBEG, LEND */

        rsr     a2, LBEG
        rsr     a3, LEND
        s32i    a2, a1, PT_LBEG
        s32i    a3, a1, PT_LEND

        /* Save optional registers. */

        save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
        
        /* Go to second-level dispatcher. Set up parameters to pass to the
         * exception handler and call the exception handler.
         */

        movi    a4, exc_table
        mov     a6, a1                  # pass stack frame
        mov     a7, a0                  # pass EXCCAUSE
        addx4   a4, a0, a4
        l32i    a4, a4, EXC_TABLE_DEFAULT               # load handler

        /* Call the second-level handler */

        callx4  a4

        /* Jump here for exception exit */

common_exception_return:

        /* Jump if we are returning from kernel exceptions. */

1:      l32i    a3, a1, PT_PS
        _bbci.l a3, PS_UM_BIT, 4f

        /* Specific to a user exception exit:
         * We need to check some flags for signal handling and rescheduling,
         * and have to restore WB and WS, extra states, and all registers
         * in the register file that were in use in the user task.
         * Note that we don't disable interrupts here. 
         */

        GET_THREAD_INFO(a2,a1)
        l32i    a4, a2, TI_FLAGS

        _bbsi.l a4, TIF_NEED_RESCHED, 3f
        _bbci.l a4, TIF_SIGPENDING, 4f

        l32i    a4, a1, PT_DEPC
        bgeui   a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f

        /* Call do_signal() */

        movi    a4, do_signal   # int do_signal(struct pt_regs*, sigset_t*)
        mov     a6, a1
        movi    a7, 0
        callx4  a4
        j       1b

3:      /* Reschedule */

        movi    a4, schedule    # void schedule (void)
        callx4  a4
        j       1b

4:      /* Restore optional registers. */

        load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT

        wsr     a3, PS          /* disable interrupts */

        _bbci.l a3, PS_UM_BIT, kernel_exception_exit

user_exception_exit:

        /* Restore the state of the task and return from the exception. */

        /* Switch to the user thread WINDOWBASE. Save SP temporarily in DEPC */

        l32i    a2, a1, PT_WINDOWBASE
        l32i    a3, a1, PT_WINDOWSTART
        wsr     a1, DEPC                # use DEPC as temp storage
        wsr     a3, WINDOWSTART         # restore WINDOWSTART
        ssr     a2                      # preserve user's WB in the SAR
        wsr     a2, WINDOWBASE          # switch to user's saved WB
        rsync
        rsr     a1, DEPC                # restore stack pointer
        l32i    a2, a1, PT_WMASK        # register frames saved (in bits 4...9)
        rotw    -1                      # we restore a4..a7
        _bltui  a6, 16, 1f              # only have to restore current window?

        /* The working registers are a0 and a3.  We are restoring to
         * a4..a7.  Be careful not to destroy what we have just restored.
         * Note: wmask has the format YYYYM:
         *       Y: number of registers saved in groups of 4
         *       M: 4 bit mask of first 16 registers
         */

        mov     a2, a6
        mov     a3, a5

2:      rotw    -1                      # a0..a3 become a4..a7
        addi    a3, a7, -4*4            # next iteration
        addi    a2, a6, -16             # decrementing Y in WMASK
        l32i    a4, a3, PT_AREG_END + 0
        l32i    a5, a3, PT_AREG_END + 4
        l32i    a6, a3, PT_AREG_END + 8
        l32i    a7, a3, PT_AREG_END + 12
        _bgeui  a2, 16, 2b

        /* Clear unrestored registers (don't leak anything to user-land */

1:      rsr     a0, WINDOWBASE
        rsr     a3, SAR
        sub     a3, a0, a3
        beqz    a3, 2f
        extui   a3, a3, 0, WBBITS

1:      rotw    -1
        addi    a3, a7, -1
        movi    a4, 0
        movi    a5, 0
        movi    a6, 0
        movi    a7, 0
        bgei    a3, 1, 1b

        /* We are back were we were when we started.
         * Note: a2 still contains WMASK (if we've returned to the original
         *       frame where we had loaded a2), or at least the lower 4 bits
         *       (if we have restored WSBITS-1 frames).
         */

2:      j       common_exception_exit

        /* This is the kernel exception exit.
         * We avoided to do a MOVSP when we entered the exception, but we
         * have to do it here.
         */

kernel_exception_exit:

#ifdef PREEMPTIBLE_KERNEL

#ifdef CONFIG_PREEMPT

        /*
         * Note: We've just returned from a call4, so we have
         * at least 4 addt'l regs.
         */

        /* Check current_thread_info->preempt_count */

        GET_THREAD_INFO(a2)
        l32i    a3, a2, TI_PREEMPT
        bnez    a3, 1f

        l32i    a2, a2, TI_FLAGS

1:

#endif

#endif

        /* Check if we have to do a movsp.
         *
         * We only have to do a movsp if the previous window-frame has
         * been spilled to the *temporary* exception stack instead of the
         * task's stack. This is the case if the corresponding bit in
         * WINDOWSTART for the previous window-frame was set before
         * (not spilled) but is zero now (spilled).
         * If this bit is zero, all other bits except the one for the
         * current window frame are also zero. So, we can use a simple test:
         * 'and' WINDOWSTART and WINDOWSTART-1:
         *
         *  (XXXXXX1[0]* - 1) AND XXXXXX1[0]* = XXXXXX0[0]*
         *
         * The result is zero only if one bit was set.
         *
         * (Note: We might have gone through several task switches before
         *        we come back to the current task, so WINDOWBASE might be
         *        different from the time the exception occurred.)
         */

        /* Test WINDOWSTART before and after the exception.
         * We actually have WMASK, so we only have to test if it is 1 or not.
         */

        l32i    a2, a1, PT_WMASK
        _beqi   a2, 1, common_exception_exit    # Spilled before exception,jump

        /* Test WINDOWSTART now. If spilled, do the movsp */

        rsr     a3, WINDOWSTART
        addi    a0, a3, -1
        and     a3, a3, a0
        _bnez   a3, common_exception_exit

        /* Do a movsp (we returned from a call4, so we have at least a0..a7) */

        addi    a0, a1, -16
        l32i    a3, a0, 0
        l32i    a4, a0, 4
        s32i    a3, a1, PT_SIZE+0
        s32i    a4, a1, PT_SIZE+4
        l32i    a3, a0, 8
        l32i    a4, a0, 12
        s32i    a3, a1, PT_SIZE+8
        s32i    a4, a1, PT_SIZE+12

        /* Common exception exit.
         * We restore the special register and the current window frame, and
         * return from the exception.
         *
         * Note: We expect a2 to hold PT_WMASK
         */

common_exception_exit:

        /* Restore address registers. */

        _bbsi.l a2, 1, 1f
        l32i    a4,  a1, PT_AREG4
        l32i    a5,  a1, PT_AREG5
        l32i    a6,  a1, PT_AREG6
        l32i    a7,  a1, PT_AREG7
        _bbsi.l a2, 2, 1f
        l32i    a8,  a1, PT_AREG8
        l32i    a9,  a1, PT_AREG9
        l32i    a10, a1, PT_AREG10
        l32i    a11, a1, PT_AREG11
        _bbsi.l a2, 3, 1f
        l32i    a12, a1, PT_AREG12
        l32i    a13, a1, PT_AREG13
        l32i    a14, a1, PT_AREG14
        l32i    a15, a1, PT_AREG15

        /* Restore PC, SAR */

1:      l32i    a2, a1, PT_PC
        l32i    a3, a1, PT_SAR
        wsr     a2, EPC_1
        wsr     a3, SAR

        /* Restore LBEG, LEND, LCOUNT */

        l32i    a2, a1, PT_LBEG
        l32i    a3, a1, PT_LEND
        wsr     a2, LBEG
        l32i    a2, a1, PT_LCOUNT
        wsr     a3, LEND
        wsr     a2, LCOUNT

        /* We control single stepping through the ICOUNTLEVEL register. */

        l32i    a2, a1, PT_ICOUNTLEVEL
        movi    a3, -2
        wsr     a2, ICOUNTLEVEL
        wsr     a3, ICOUNT

        /* Check if it was double exception. */

        l32i    a0, a1, PT_DEPC
        l32i    a3, a1, PT_AREG3
        l32i    a2, a1, PT_AREG2
        _bgeui  a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f

        /* Restore a0...a3 and return */

        l32i    a0, a1, PT_AREG0
        l32i    a1, a1, PT_AREG1
        rfe

1:      wsr     a0, DEPC
        l32i    a0, a1, PT_AREG0
        l32i    a1, a1, PT_AREG1
        rfde

/*
 * Debug exception handler.
 *
 * Currently, we don't support KGDB, so only user application can be debugged.
 *
 * When we get here,  a0 is trashed and saved to excsave[debuglevel]
 */

ENTRY(debug_exception)

        rsr     a0, EPS + XCHAL_DEBUGLEVEL
        bbsi.l  a0, PS_EXCM_BIT, 1f     # exception mode

        /* Set EPC_1 and EXCCAUSE */

        wsr     a2, DEPC                # save a2 temporarily
        rsr     a2, EPC + XCHAL_DEBUGLEVEL
        wsr     a2, EPC_1

        movi    a2, EXCCAUSE_MAPPED_DEBUG
        wsr     a2, EXCCAUSE

        /* Restore PS to the value before the debug exc but with PS.EXCM set.*/

        movi    a2, 1 << PS_EXCM_BIT
        or      a2, a0, a2
        movi    a0, debug_exception     # restore a3, debug jump vector
        wsr     a2, PS
        xsr     a0, EXCSAVE + XCHAL_DEBUGLEVEL

        /* Switch to kernel/user stack, restore jump vector, and save a0 */

        bbsi.l  a2, PS_UM_BIT, 2f       # jump if user mode

        addi    a2, a1, -16-PT_SIZE     # assume kernel stack
        s32i    a0, a2, PT_AREG0
        movi    a0, 0
        s32i    a1, a2, PT_AREG1
        s32i    a0, a2, PT_DEPC         # mark it as a regular exception
        xsr     a0, DEPC
        s32i    a3, a2, PT_AREG3
        s32i    a0, a2, PT_AREG2
        mov     a1, a2
        j       _kernel_exception

2:      rsr     a2, EXCSAVE_1
        l32i    a2, a2, EXC_TABLE_KSTK  # load kernel stack pointer
        s32i    a0, a2, PT_AREG0
        movi    a0, 0
        s32i    a1, a2, PT_AREG1
        s32i    a0, a2, PT_DEPC
        xsr     a0, DEPC
        s32i    a3, a2, PT_AREG3
        s32i    a0, a2, PT_AREG2
        mov     a1, a2
        j       _user_exception

        /* Debug exception while in exception mode. */
1:      j       1b      // FIXME!!


/*
 * We get here in case of an unrecoverable exception.
 * The only thing we can do is to be nice and print a panic message.
 * We only produce a single stack frame for panic, so ???
 *
 *
 * Entry conditions:
 *
 *   - a0 contains the caller address; original value saved in excsave1.
 *   - the original a0 contains a valid return address (backtrace) or 0.
 *   - a2 contains a valid stackpointer
 *
 * Notes:
 *
 *   - If the stack pointer could be invalid, the caller has to setup a
 *     dummy stack pointer (e.g. the stack of the init_task)
 *
 *   - If the return address could be invalid, the caller has to set it
 *     to 0, so the backtrace would stop.
 *
 */
        .align 4
unrecoverable_text:
        .ascii "Unrecoverable error in exception handler\0"

ENTRY(unrecoverable_exception)

        movi    a0, 1
        movi    a1, 0

        wsr     a0, WINDOWSTART
        wsr     a1, WINDOWBASE
        rsync

        movi    a1, (1 << PS_WOE_BIT) | 1
        wsr     a1, PS
        rsync

        movi    a1, init_task
        movi    a0, 0
        addi    a1, a1, PT_REGS_OFFSET

        movi    a4, panic
        movi    a6, unrecoverable_text

        callx4  a4

1:      j       1b


/* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */

/*
 * Fast-handler for alloca exceptions
 *
 *  The ALLOCA handler is entered when user code executes the MOVSP
 *  instruction and the caller's frame is not in the register file.
 *  In this case, the caller frame's a0..a3 are on the stack just
 *  below sp (a1), and this handler moves them.
 *
 *  For "MOVSP <ar>,<as>" without destination register a1, this routine
 *  simply moves the value from <as> to <ar> without moving the save area.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        dispatch table
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: a3
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 */

#if XCHAL_HAVE_BE
#define _EXTUI_MOVSP_SRC(ar)    extui ar, ar, 4, 4
#define _EXTUI_MOVSP_DST(ar)    extui ar, ar, 0, 4
#else
#define _EXTUI_MOVSP_SRC(ar)    extui ar, ar, 0, 4
#define _EXTUI_MOVSP_DST(ar)    extui ar, ar, 4, 4
#endif

ENTRY(fast_alloca)

        /* We shouldn't be in a double exception. */

        l32i    a0, a2, PT_DEPC
        _bgeui  a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lunhandled_double

        rsr     a0, DEPC                # get a2
        s32i    a4, a2, PT_AREG4        # save a4 and
        s32i    a0, a2, PT_AREG2        # a2 to stack

        /* Exit critical section. */

        movi    a0, 0
        s32i    a0, a3, EXC_TABLE_FIXUP

        /* Restore a3, excsave_1 */

        xsr     a3, EXCSAVE_1           # make sure excsave_1 is valid for dbl.
        rsr     a4, EPC_1               # get exception address
        s32i    a3, a2, PT_AREG3        # save a3 to stack

#ifdef ALLOCA_EXCEPTION_IN_IRAM
#error  iram not supported
#else
        /* Note: l8ui not allowed in IRAM/IROM!! */
        l8ui    a0, a4, 1               # read as(src) from MOVSP instruction
#endif
        movi    a3, .Lmovsp_src
        _EXTUI_MOVSP_SRC(a0)            # extract source register number
        addx8   a3, a0, a3
        jx      a3

.Lunhandled_double:
        wsr     a0, EXCSAVE_1
        movi    a0, unrecoverable_exception
        callx0  a0

        .align 8
.Lmovsp_src:
        l32i    a3, a2, PT_AREG0;       _j 1f;  .align 8
        mov     a3, a1;                 _j 1f;  .align 8
        l32i    a3, a2, PT_AREG2;       _j 1f;  .align 8
        l32i    a3, a2, PT_AREG3;       _j 1f;  .align 8
        l32i    a3, a2, PT_AREG4;       _j 1f;  .align 8
        mov     a3, a5;                 _j 1f;  .align 8
        mov     a3, a6;                 _j 1f;  .align 8
        mov     a3, a7;                 _j 1f;  .align 8
        mov     a3, a8;                 _j 1f;  .align 8
        mov     a3, a9;                 _j 1f;  .align 8
        mov     a3, a10;                _j 1f;  .align 8
        mov     a3, a11;                _j 1f;  .align 8
        mov     a3, a12;                _j 1f;  .align 8
        mov     a3, a13;                _j 1f;  .align 8
        mov     a3, a14;                _j 1f;  .align 8
        mov     a3, a15;                _j 1f;  .align 8

1:

#ifdef ALLOCA_EXCEPTION_IN_IRAM
#error  iram not supported
#else
        l8ui    a0, a4, 0               # read ar(dst) from MOVSP instruction
#endif
        addi    a4, a4, 3               # step over movsp
        _EXTUI_MOVSP_DST(a0)            # extract destination register
        wsr     a4, EPC_1               # save new epc_1

        _bnei   a0, 1, 1f               # no 'movsp a1, ax': jump

        /* Move the save area. This implies the use of the L32E
         * and S32E instructions, because this move must be done with
         * the user's PS.RING privilege levels, not with ring 0
         * (kernel's) privileges currently active with PS.EXCM
         * set. Note that we have stil registered a fixup routine with the
         * double exception vector in case a double exception occurs.
         */

        /* a0,a4:avail a1:old user stack a2:exc. stack a3:new user stack. */

        l32e    a0, a1, -16
        l32e    a4, a1, -12
        s32e    a0, a3, -16
        s32e    a4, a3, -12
        l32e    a0, a1, -8
        l32e    a4, a1, -4
        s32e    a0, a3, -8
        s32e    a4, a3, -4

        /* Restore stack-pointer and all the other saved registers. */

        mov     a1, a3

        l32i    a4, a2, PT_AREG4
        l32i    a3, a2, PT_AREG3
        l32i    a0, a2, PT_AREG0
        l32i    a2, a2, PT_AREG2
        rfe

        /*  MOVSP <at>,<as>  was invoked with <at> != a1.
         *  Because the stack pointer is not being modified,
         *  we should be able to just modify the pointer
         *  without moving any save area.
         *  The processor only traps these occurrences if the
         *  caller window isn't live, so unfortunately we can't
         *  use this as an alternate trap mechanism.
         *  So we just do the move.  This requires that we
         *  resolve the destination register, not just the source,
         *  so there's some extra work.
         *  (PERHAPS NOT REALLY NEEDED, BUT CLEANER...)
         */

        /* a0 dst-reg, a1 user-stack, a2 stack, a3 value of src reg. */

1:      movi    a4, .Lmovsp_dst
        addx8   a4, a0, a4
        jx      a4

        .align 8
.Lmovsp_dst:
        s32i    a3, a2, PT_AREG0;       _j 1f;  .align 8
        mov     a1, a3;                 _j 1f;  .align 8
        s32i    a3, a2, PT_AREG2;       _j 1f;  .align 8
        s32i    a3, a2, PT_AREG3;       _j 1f;  .align 8
        s32i    a3, a2, PT_AREG4;       _j 1f;  .align 8
        mov     a5, a3;                 _j 1f;  .align 8
        mov     a6, a3;                 _j 1f;  .align 8
        mov     a7, a3;                 _j 1f;  .align 8
        mov     a8, a3;                 _j 1f;  .align 8
        mov     a9, a3;                 _j 1f;  .align 8
        mov     a10, a3;                _j 1f;  .align 8
        mov     a11, a3;                _j 1f;  .align 8
        mov     a12, a3;                _j 1f;  .align 8
        mov     a13, a3;                _j 1f;  .align 8
        mov     a14, a3;                _j 1f;  .align 8
        mov     a15, a3;                _j 1f;  .align 8

1:      l32i    a4, a2, PT_AREG4
        l32i    a3, a2, PT_AREG3
        l32i    a0, a2, PT_AREG0
        l32i    a2, a2, PT_AREG2
        rfe


/*
 * fast system calls.
 *
 * WARNING:  The kernel doesn't save the entire user context before
 * handling a fast system call.  These functions are small and short,
 * usually offering some functionality not available to user tasks.
 *
 * BE CAREFUL TO PRESERVE THE USER'S CONTEXT.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        dispatch table
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: a3
 */

ENTRY(fast_syscall_kernel)

        /* Skip syscall. */

        rsr     a0, EPC_1
        addi    a0, a0, 3
        wsr     a0, EPC_1

        l32i    a0, a2, PT_DEPC
        bgeui   a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable

        rsr     a0, DEPC                        # get syscall-nr
        _beqz   a0, fast_syscall_spill_registers
        _beqi   a0, __NR_xtensa, fast_syscall_xtensa

        j       kernel_exception

ENTRY(fast_syscall_user)

        /* Skip syscall. */

        rsr     a0, EPC_1
        addi    a0, a0, 3
        wsr     a0, EPC_1

        l32i    a0, a2, PT_DEPC
        bgeui   a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable

        rsr     a0, DEPC                        # get syscall-nr
        _beqz   a0, fast_syscall_spill_registers
        _beqi   a0, __NR_xtensa, fast_syscall_xtensa

        j       user_exception

ENTRY(fast_syscall_unrecoverable)

        /* Restore all states. */

        l32i    a0, a2, PT_AREG0        # restore a0
        xsr     a2, DEPC                # restore a2, depc
        rsr     a3, EXCSAVE_1

        wsr     a0, EXCSAVE_1
        movi    a0, unrecoverable_exception
        callx0  a0



/*
 * sysxtensa syscall handler
 *
 * int sysxtensa (SYS_XTENSA_ATOMIC_SET,     ptr, val,    unused);
 * int sysxtensa (SYS_XTENSA_ATOMIC_ADD,     ptr, val,    unused);
 * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val,    unused);
 * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
 *        a2            a6                   a3    a4      a5
 *
 * Entry condition:
 *
 *   a0:        a2 (syscall-nr), original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in a0 and DEPC
 *   a3:        dispatch table, original in excsave_1
 *   a4..a15:   unchanged
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: a3
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 *
 * Note: we don't have to save a2; a2 holds the return value
 *
 * We use the two macros TRY and CATCH:
 *
 * TRY   adds an entry to the __ex_table fixup table for the immediately
 *       following instruction.
 *
 * CATCH catches any exception that occurred at one of the preceeding TRY
 *       statements and continues from there
 *
 * Usage TRY    l32i    a0, a1, 0
 *              <other code>
 *       done:  rfe
 *       CATCH  <set return code>
 *              j done
 */

#define TRY                                                             \
        .section __ex_table, "a";                                       \
        .word   66f, 67f;                                               \
        .text;                                                          \
66:

#define CATCH                                                           \
67:

ENTRY(fast_syscall_xtensa)

        xsr     a3, EXCSAVE_1           # restore a3, excsave1

        s32i    a7, a2, PT_AREG7        # we need an additional register
        movi    a7, 4                   # sizeof(unsigned int)
        access_ok a3, a7, a0, a2, .Leac # a0: scratch reg, a2: sp

        addi    a6, a6, -1              # assuming SYS_XTENSA_ATOMIC_SET = 1
        _bgeui  a6, SYS_XTENSA_COUNT - 1, .Lill
        _bnei   a6, SYS_XTENSA_ATOMIC_CMP_SWP - 1, .Lnswp

        /* Fall through for ATOMIC_CMP_SWP. */

.Lswp:  /* Atomic compare and swap */

TRY     l32i    a0, a3, 0               # read old value
        bne     a0, a4, 1f              # same as old value? jump
TRY     s32i    a5, a3, 0               # different, modify value
        l32i    a7, a2, PT_AREG7        # restore a7
        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, 1                   # and return 1
        addi    a6, a6, 1               # restore a6 (really necessary?)
        rfe

1:      l32i    a7, a2, PT_AREG7        # restore a7
        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, 0                   # return 0 (note that we cannot set
        addi    a6, a6, 1               # restore a6 (really necessary?)
        rfe

.Lnswp: /* Atomic set, add, and exg_add. */

TRY     l32i    a7, a3, 0               # orig
        add     a0, a4, a7              # + arg
        moveqz  a0, a4, a6              # set
TRY     s32i    a0, a3, 0               # write new value

        mov     a0, a2
        mov     a2, a7
        l32i    a7, a0, PT_AREG7        # restore a7
        l32i    a0, a0, PT_AREG0        # restore a0
        addi    a6, a6, 1               # restore a6 (really necessary?)
        rfe

CATCH
.Leac:  l32i    a7, a2, PT_AREG7        # restore a7
        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, -EFAULT
        rfe

.Lill:  l32i    a7, a2, PT_AREG0        # restore a7
        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, -EINVAL
        rfe




/* fast_syscall_spill_registers.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        dispatch table
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: a3
 *
 * Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
 */

ENTRY(fast_syscall_spill_registers)

        /* Register a FIXUP handler (pass current wb as a parameter) */

        movi    a0, fast_syscall_spill_registers_fixup
        s32i    a0, a3, EXC_TABLE_FIXUP
        rsr     a0, WINDOWBASE
        s32i    a0, a3, EXC_TABLE_PARAM

        /* Save a3 and SAR on stack. */

        rsr     a0, SAR
        xsr     a3, EXCSAVE_1           # restore a3 and excsave_1
        s32i    a3, a2, PT_AREG3
        s32i    a4, a2, PT_AREG4
        s32i    a0, a2, PT_AREG5        # store SAR to PT_AREG5

        /* The spill routine might clobber a7, a11, and a15. */

        s32i    a7, a2, PT_AREG7
        s32i    a11, a2, PT_AREG11
        s32i    a15, a2, PT_AREG15

        call0   _spill_registers        # destroys a3, a4, and SAR

        /* Advance PC, restore registers and SAR, and return from exception. */

        l32i    a3, a2, PT_AREG5
        l32i    a4, a2, PT_AREG4
        l32i    a0, a2, PT_AREG0
        wsr     a3, SAR
        l32i    a3, a2, PT_AREG3

        /* Restore clobbered registers. */

        l32i    a7, a2, PT_AREG7
        l32i    a11, a2, PT_AREG11
        l32i    a15, a2, PT_AREG15

        movi    a2, 0
        rfe

/* Fixup handler.
 *
 * We get here if the spill routine causes an exception, e.g. tlb miss.
 * We basically restore WINDOWBASE and WINDOWSTART to the condition when
 * we entered the spill routine and jump to the user exception handler.
 *
 * a0: value of depc, original value in depc
 * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE
 * a3: exctable, original value in excsave1
 */

fast_syscall_spill_registers_fixup:

        rsr     a2, WINDOWBASE  # get current windowbase (a2 is saved)
        xsr     a0, DEPC        # restore depc and a0
        ssl     a2              # set shift (32 - WB)

        /* We need to make sure the current registers (a0-a3) are preserved.
         * To do this, we simply set the bit for the current window frame
         * in WS, so that the exception handlers save them to the task stack.
         */

        rsr     a3, EXCSAVE_1   # get spill-mask
        slli    a2, a3, 1       # shift left by one

        slli    a3, a2, 32-WSBITS
        src     a2, a2, a3      # a1 = xxwww1yyxxxwww1yy......
        wsr     a2, WINDOWSTART # set corrected windowstart

        movi    a3, exc_table
        l32i    a2, a3, EXC_TABLE_DOUBLE_SAVE   # restore a2
        l32i    a3, a3, EXC_TABLE_PARAM # original WB (in user task)

        /* Return to the original (user task) WINDOWBASE.
         * We leave the following frame behind:
         * a0, a1, a2   same
         * a3:          trashed (saved in excsave_1)
         * depc:        depc (we have to return to that address)
         * excsave_1:   a3
         */

        wsr     a3, WINDOWBASE
        rsync

        /* We are now in the original frame when we entered _spill_registers:
         *  a0: return address
         *  a1: used, stack pointer
         *  a2: kernel stack pointer
         *  a3: available, saved in EXCSAVE_1
         *  depc: exception address
         *  excsave: a3
         * Note: This frame might be the same as above.
         */

        /* Setup stack pointer. */

        addi    a2, a2, -PT_USER_SIZE
        s32i    a0, a2, PT_AREG0

        /* Make sure we return to this fixup handler. */

        movi    a3, fast_syscall_spill_registers_fixup_return
        s32i    a3, a2, PT_DEPC         # setup depc

        /* Jump to the exception handler. */

        movi    a3, exc_table
        rsr     a0, EXCCAUSE
        addx4   a0, a0, a3                      # find entry in table
        l32i    a0, a0, EXC_TABLE_FAST_USER     # load handler
        jx      a0

fast_syscall_spill_registers_fixup_return:

        /* When we return here, all registers have been restored (a2: DEPC) */

        wsr     a2, DEPC                # exception address

        /* Restore fixup handler. */

        xsr     a3, EXCSAVE_1
        movi    a2, fast_syscall_spill_registers_fixup
        s32i    a2, a3, EXC_TABLE_FIXUP
        rsr     a2, WINDOWBASE
        s32i    a2, a3, EXC_TABLE_PARAM
        l32i    a2, a3, EXC_TABLE_KSTK

        /* Load WB at the time the exception occurred. */

        rsr     a3, SAR                 # WB is still in SAR
        neg     a3, a3
        wsr     a3, WINDOWBASE
        rsync

        /* Restore a3 and return. */

        movi    a3, exc_table
        xsr     a3, EXCSAVE_1

        rfde


/*
 * spill all registers.
 *
 * This is not a real function. The following conditions must be met:
 *
 *  - must be called with call0.
 *  - uses a3, a4 and SAR.
 *  - the last 'valid' register of each frame are clobbered.
 *  - the caller must have registered a fixup handler
 *    (or be inside a critical section)
 *  - PS_EXCM must be set (PS_WOE cleared?)
 */

ENTRY(_spill_registers)

        /*
         * Rotate ws so that the current windowbase is at bit 0.
         * Assume ws = xxxwww1yy (www1 current window frame).
         * Rotate ws right so that a4 = yyxxxwww1.
         */

        rsr     a4, WINDOWBASE
        rsr     a3, WINDOWSTART         # a3 = xxxwww1yy
        ssr     a4                      # holds WB
        slli    a4, a3, WSBITS
        or      a3, a3, a4              # a3 = xxxwww1yyxxxwww1yy
        srl     a3, a3                  # a3 = 00xxxwww1yyxxxwww1

        /* We are done if there are no more than the current register frame. */

        extui   a3, a3, 1, WSBITS-1     # a3 = 0yyxxxwww
        movi    a4, (1 << (WSBITS-1))
        _beqz   a3, .Lnospill           # only one active frame? jump

        /* We want 1 at the top, so that we return to the current windowbase */

        or      a3, a3, a4              # 1yyxxxwww

        /* Skip empty frames - get 'oldest' WINDOWSTART-bit. */

        wsr     a3, WINDOWSTART         # save shifted windowstart
        neg     a4, a3
        and     a3, a4, a3              # first bit set from right: 000010000

        ffs_ws  a4, a3                  # a4: shifts to skip empty frames
        movi    a3, WSBITS
        sub     a4, a3, a4              # WSBITS-a4:number of 0-bits from right
        ssr     a4                      # save in SAR for later.

        rsr     a3, WINDOWBASE
        add     a3, a3, a4
        wsr     a3, WINDOWBASE
        rsync

        rsr     a3, WINDOWSTART
        srl     a3, a3                  # shift windowstart

        /* WB is now just one frame below the oldest frame in the register
           window. WS is shifted so the oldest frame is in bit 0, thus, WB
           and WS differ by one 4-register frame. */

        /* Save frames. Depending what call was used (call4, call8, call12),
         * we have to save 4,8. or 12 registers.
         */

        _bbsi.l a3, 1, .Lc4
        _bbsi.l a3, 2, .Lc8

        /* Special case: we have a call12-frame starting at a4. */

        _bbci.l a3, 3, .Lc12    # bit 3 shouldn't be zero! (Jump to Lc12 first)

        s32e    a4, a1, -16     # a1 is valid with an empty spill area
        l32e    a4, a5, -12
        s32e    a8, a4, -48
        mov     a8, a4
        l32e    a4, a1, -16
        j       .Lc12c

.Lnospill:
        ret

.Lloop: _bbsi.l a3, 1, .Lc4
        _bbci.l a3, 2, .Lc12

.Lc8:   s32e    a4, a13, -16
        l32e    a4, a5, -12
        s32e    a8, a4, -32
        s32e    a5, a13, -12
        s32e    a6, a13, -8
        s32e    a7, a13, -4
        s32e    a9, a4, -28
        s32e    a10, a4, -24
        s32e    a11, a4, -20

        srli    a11, a3, 2              # shift windowbase by 2
        rotw    2
        _bnei   a3, 1, .Lloop

.Lexit: /* Done. Do the final rotation, set WS, and return. */

        rotw    1
        rsr     a3, WINDOWBASE
        ssl     a3
        movi    a3, 1
        sll     a3, a3
        wsr     a3, WINDOWSTART
        ret

.Lc4:   s32e    a4, a9, -16
        s32e    a5, a9, -12
        s32e    a6, a9, -8
        s32e    a7, a9, -4

        srli    a7, a3, 1
        rotw    1
        _bnei   a3, 1, .Lloop
        j       .Lexit

.Lc12:  _bbci.l a3, 3, .Linvalid_mask   # bit 2 shouldn't be zero!

        /* 12-register frame (call12) */

        l32e    a2, a5, -12
        s32e    a8, a2, -48
        mov     a8, a2

.Lc12c: s32e    a9, a8, -44
        s32e    a10, a8, -40
        s32e    a11, a8, -36
        s32e    a12, a8, -32
        s32e    a13, a8, -28
        s32e    a14, a8, -24
        s32e    a15, a8, -20
        srli    a15, a3, 3

        /* The stack pointer for a4..a7 is out of reach, so we rotate the
         * window, grab the stackpointer, and rotate back.
         * Alternatively, we could also use the following approach, but that
         * makes the fixup routine much more complicated:
         * rotw 1
         * s32e a0, a13, -16
         * ...
         * rotw 2
         */

        rotw    1
        mov     a5, a13
        rotw    -1

        s32e    a4, a9, -16
        s32e    a5, a9, -12
        s32e    a6, a9, -8
        s32e    a7, a9, -4

        rotw    3

        _beqi   a3, 1, .Lexit
        j       .Lloop

.Linvalid_mask:

        /* We get here because of an unrecoverable error in the window
         * registers. If we are in user space, we kill the application,
         * however, this condition is unrecoverable in kernel space.
         */

        rsr     a0, PS
        _bbci.l a0, PS_UM_BIT, 1f

        /* User space: Setup a dummy frame and kill application.
         * Note: We assume EXC_TABLE_KSTK contains a valid stack pointer.
         */

        movi    a0, 1
        movi    a1, 0

        wsr     a0, WINDOWSTART
        wsr     a1, WINDOWBASE
        rsync

        movi    a0, 0

        movi    a3, exc_table
        l32i    a1, a3, EXC_TABLE_KSTK
        wsr     a3, EXCSAVE_1

        movi    a4, (1 << PS_WOE_BIT) | 1
        wsr     a4, PS
        rsync

        movi    a6, SIGSEGV
        movi    a4, do_exit
        callx4  a4

1:      /* Kernel space: PANIC! */

        wsr     a0, EXCSAVE_1
        movi    a0, unrecoverable_exception
        callx0  a0              # should not return
1:      j       1b

/*
 * We should never get here. Bail out!
 */

ENTRY(fast_second_level_miss_double_kernel)

1:      movi    a0, unrecoverable_exception
        callx0  a0              # should not return
1:      j       1b

/* First-level entry handler for user, kernel, and double 2nd-level
 * TLB miss exceptions.  Note that for now, user and kernel miss
 * exceptions share the same entry point and are handled identically.
 *
 * An old, less-efficient C version of this function used to exist.
 * We include it below, interleaved as comments, for reference.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        dispatch table
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: a3
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 */

ENTRY(fast_second_level_miss)

        /* Save a1. Note: we don't expect a double exception. */

        s32i    a1, a2, PT_AREG1

        /* We need to map the page of PTEs for the user task.  Find
         * the pointer to that page.  Also, it's possible for tsk->mm
         * to be NULL while tsk->active_mm is nonzero if we faulted on
         * a vmalloc address.  In that rare case, we must use
         * active_mm instead to avoid a fault in this handler.  See
         *
         * http://mail.nl.linux.org/linux-mm/2002-08/msg00258.html
         *   (or search Internet on "mm vs. active_mm")
         *
         *      if (!mm)
         *              mm = tsk->active_mm;
         *      pgd = pgd_offset (mm, regs->excvaddr);
         *      pmd = pmd_offset (pgd, regs->excvaddr);
         *      pmdval = *pmd;
         */

        GET_CURRENT(a1,a2)
        l32i    a0, a1, TASK_MM         # tsk->mm
        beqz    a0, 9f


        /* We deliberately destroy a3 that holds the exception table. */

8:      rsr     a3, EXCVADDR            # fault address
        _PGD_OFFSET(a0, a3, a1)
        l32i    a0, a0, 0               # read pmdval
        beqz    a0, 2f

        /* Read ptevaddr and convert to top of page-table page.
         *
         *      vpnval = read_ptevaddr_register() & PAGE_MASK;
         *      vpnval += DTLB_WAY_PGTABLE;
         *      pteval = mk_pte (virt_to_page(pmd_val(pmdval)), PAGE_KERNEL);
         *      write_dtlb_entry (pteval, vpnval);
         *
         * The messy computation for 'pteval' above really simplifies
         * into the following:
         *
         * pteval = ((pmdval - PAGE_OFFSET) & PAGE_MASK) | PAGE_DIRECTORY
         */

        movi    a1, -PAGE_OFFSET
        add     a0, a0, a1              # pmdval - PAGE_OFFSET
        extui   a1, a0, 0, PAGE_SHIFT   # ... & PAGE_MASK
        xor     a0, a0, a1

        movi    a1, _PAGE_DIRECTORY
        or      a0, a0, a1              # ... | PAGE_DIRECTORY

        /*
         * We utilize all three wired-ways (7-9) to hold pmd translations.
         * Memory regions are mapped to the DTLBs according to bits 28 and 29.
         * This allows to map the three most common regions to three different
         * DTLBs:
         *  0,1 -> way 7        program (0040.0000) and virtual (c000.0000)
         *  2   -> way 8        shared libaries (2000.0000)
         *  3   -> way 0        stack (3000.0000)
         */

        extui   a3, a3, 28, 2           # addr. bit 28 and 29   0,1,2,3
        rsr     a1, PTEVADDR
        addx2   a3, a3, a3              # ->                    0,3,6,9
        srli    a1, a1, PAGE_SHIFT
        extui   a3, a3, 2, 2            # ->                    0,0,1,2
        slli    a1, a1, PAGE_SHIFT      # ptevaddr & PAGE_MASK
        addi    a3, a3, DTLB_WAY_PGD
        add     a1, a1, a3              # ... + way_number

3:      wdtlb   a0, a1
        dsync

        /* Exit critical section. */

4:      movi    a3, exc_table           # restore a3
        movi    a0, 0
        s32i    a0, a3, EXC_TABLE_FIXUP

        /* Restore the working registers, and return. */

        l32i    a0, a2, PT_AREG0
        l32i    a1, a2, PT_AREG1
        l32i    a2, a2, PT_DEPC
        xsr     a3, EXCSAVE_1

        bgeui   a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f

        /* Restore excsave1 and return. */

        rsr     a2, DEPC
        rfe

        /* Return from double exception. */

1:      xsr     a2, DEPC
        esync
        rfde

9:      l32i    a0, a1, TASK_ACTIVE_MM  # unlikely case mm == 0
        j       8b

#if (DCACHE_WAY_SIZE > PAGE_SIZE)

2:      /* Special case for cache aliasing.
         * We (should) only get here if a clear_user_page, copy_user_page
         * or the aliased cache flush functions got preemptively interrupted 
         * by another task. Re-establish temporary mapping to the 
         * TLBTEMP_BASE areas.
         */

        /* We shouldn't be in a double exception */

        l32i    a0, a2, PT_DEPC
        bgeui   a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 2f

        /* Make sure the exception originated in the special functions */

        movi    a0, __tlbtemp_mapping_start
        rsr     a3, EPC_1
        bltu    a3, a0, 2f
        movi    a0, __tlbtemp_mapping_end
        bgeu    a3, a0, 2f

        /* Check if excvaddr was in one of the TLBTEMP_BASE areas. */

        movi    a3, TLBTEMP_BASE_1
        rsr     a0, EXCVADDR
        bltu    a0, a3, 2f

        addi    a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT))
        bgeu    a1, a3, 2f

        /* Check if we have to restore an ITLB mapping. */

        movi    a1, __tlbtemp_mapping_itlb
        rsr     a3, EPC_1
        sub     a3, a3, a1

        /* Calculate VPN */

        movi    a1, PAGE_MASK
        and     a1, a1, a0

        /* Jump for ITLB entry */

        bgez    a3, 1f

        /* We can use up to two TLBTEMP areas, one for src and one for dst. */

        extui   a3, a0, PAGE_SHIFT + DCACHE_ALIAS_ORDER, 1
        add     a1, a3, a1

        /* PPN is in a6 for the first TLBTEMP area and in a7 for the second. */

        mov     a0, a6
        movnez  a0, a7, a3
        j       3b

        /* ITLB entry. We only use dst in a6. */

1:      witlb   a6, a1
        isync
        j       4b


#endif  // DCACHE_WAY_SIZE > PAGE_SIZE


2:      /* Invalid PGD, default exception handling */

        movi    a3, exc_table
        rsr     a1, DEPC
        xsr     a3, EXCSAVE_1
        s32i    a1, a2, PT_AREG2
        s32i    a3, a2, PT_AREG3
        mov     a1, a2

        rsr     a2, PS
        bbsi.l  a2, PS_UM_BIT, 1f
        j       _kernel_exception
1:      j       _user_exception


/*
 * StoreProhibitedException
 *
 * Update the pte and invalidate the itlb mapping for this pte.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        dispatch table
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: a3
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 */

ENTRY(fast_store_prohibited)

        /* Save a1 and a4. */

        s32i    a1, a2, PT_AREG1
        s32i    a4, a2, PT_AREG4

        GET_CURRENT(a1,a2)
        l32i    a0, a1, TASK_MM         # tsk->mm
        beqz    a0, 9f

8:      rsr     a1, EXCVADDR            # fault address
        _PGD_OFFSET(a0, a1, a4)
        l32i    a0, a0, 0
        beqz    a0, 2f

        /* Note that we assume _PAGE_WRITABLE_BIT is only set if pte is valid.*/

        _PTE_OFFSET(a0, a1, a4)
        l32i    a4, a0, 0               # read pteval
        bbci.l  a4, _PAGE_WRITABLE_BIT, 2f

        movi    a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
        or      a4, a4, a1
        rsr     a1, EXCVADDR
        s32i    a4, a0, 0

        /* We need to flush the cache if we have page coloring. */
#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
        dhwb    a0, 0
#endif
        pdtlb   a0, a1
        wdtlb   a4, a0

        /* Exit critical section. */

        movi    a0, 0
        s32i    a0, a3, EXC_TABLE_FIXUP

        /* Restore the working registers, and return. */

        l32i    a4, a2, PT_AREG4
        l32i    a1, a2, PT_AREG1
        l32i    a0, a2, PT_AREG0
        l32i    a2, a2, PT_DEPC

        /* Restore excsave1 and a3. */

        xsr     a3, EXCSAVE_1
        bgeui   a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f

        rsr     a2, DEPC
        rfe

        /* Double exception. Restore FIXUP handler and return. */

1:      xsr     a2, DEPC
        esync
        rfde

9:      l32i    a0, a1, TASK_ACTIVE_MM  # unlikely case mm == 0
        j       8b

2:      /* If there was a problem, handle fault in C */

        rsr     a4, DEPC        # still holds a2
        xsr     a3, EXCSAVE_1
        s32i    a4, a2, PT_AREG2
        s32i    a3, a2, PT_AREG3
        l32i    a4, a2, PT_AREG4
        mov     a1, a2

        rsr     a2, PS
        bbsi.l  a2, PS_UM_BIT, 1f
        j       _kernel_exception
1:      j       _user_exception


/*
 * System Calls.
 *
 * void system_call (struct pt_regs* regs, int exccause)
 *                            a2                 a3
 */

ENTRY(system_call)
        entry   a1, 32

        /* regs->syscall = regs->areg[2] */

        l32i    a3, a2, PT_AREG2
        mov     a6, a2
        movi    a4, do_syscall_trace_enter
        s32i    a3, a2, PT_SYSCALL
        callx4  a4

        /* syscall = sys_call_table[syscall_nr] */

        movi    a4, sys_call_table;
        movi    a5, __NR_syscall_count
        movi    a6, -ENOSYS
        bgeu    a3, a5, 1f

        addx4   a4, a3, a4
        l32i    a4, a4, 0
        movi    a5, sys_ni_syscall;
        beq     a4, a5, 1f

        /* Load args: arg0 - arg5 are passed via regs. */

        l32i    a6, a2, PT_AREG6
        l32i    a7, a2, PT_AREG3
        l32i    a8, a2, PT_AREG4
        l32i    a9, a2, PT_AREG5
        l32i    a10, a2, PT_AREG8
        l32i    a11, a2, PT_AREG9

        /* Pass one additional argument to the syscall: pt_regs (on stack) */
        s32i    a2, a1, 0

        callx4  a4

1:      /* regs->areg[2] = return_value */

        s32i    a6, a2, PT_AREG2
        movi    a4, do_syscall_trace_leave
        mov     a6, a2
        callx4  a4
        retw


/*
 * Create a kernel thread
 *
 * int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 * a2                    a2                 a3             a4
 */

ENTRY(kernel_thread)
        entry   a1, 16

        mov     a5, a2                  # preserve fn over syscall
        mov     a7, a3                  # preserve args over syscall

        movi    a3, _CLONE_VM | _CLONE_UNTRACED
        movi    a2, __NR_clone
        or      a6, a4, a3              # arg0: flags
        mov     a3, a1                  # arg1: sp
        syscall

        beq     a3, a1, 1f              # branch if parent
        mov     a6, a7                  # args
        callx4  a5                      # fn(args)

        movi    a2, __NR_exit
        syscall                         # return value of fn(args) still in a6

1:      retw

/*
 * Do a system call from kernel instead of calling sys_execve, so we end up
 * with proper pt_regs.
 *
 * int kernel_execve(const char *fname, char *const argv[], charg *const envp[])
 * a2                        a2               a3                  a4
 */

ENTRY(kernel_execve)
        entry   a1, 16
        mov     a6, a2                  # arg0 is in a6
        movi    a2, __NR_execve
        syscall

        retw

/*
 * Task switch.
 *
 * struct task*  _switch_to (struct task* prev, struct task* next)
 *         a2                              a2                 a3
 */

ENTRY(_switch_to)

        entry   a1, 16

        mov     a12, a2                 # preserve 'prev' (a2)
        mov     a13, a3                 # and 'next' (a3)

        l32i    a4, a2, TASK_THREAD_INFO
        l32i    a5, a3, TASK_THREAD_INFO

        save_xtregs_user a4 a6 a8 a9 a10 a11 THREAD_XTREGS_USER

        s32i    a0, a12, THREAD_RA      # save return address
        s32i    a1, a12, THREAD_SP      # save stack pointer

        /* Disable ints while we manipulate the stack pointer. */

        movi    a14, (1 << PS_EXCM_BIT) | LOCKLEVEL
        xsr     a14, PS
        rsr     a3, EXCSAVE_1
        rsync
        s32i    a3, a3, EXC_TABLE_FIXUP /* enter critical section */

        /* Switch CPENABLE */

#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
        l32i    a3, a5, THREAD_CPENABLE
        xsr     a3, CPENABLE
        s32i    a3, a4, THREAD_CPENABLE
#endif

        /* Flush register file. */

        call0   _spill_registers        # destroys a3, a4, and SAR

        /* Set kernel stack (and leave critical section)
         * Note: It's save to set it here. The stack will not be overwritten
         *       because the kernel stack will only be loaded again after
         *       we return from kernel space.
         */

        rsr     a3, EXCSAVE_1           # exc_table
        movi    a6, 0
        addi    a7, a5, PT_REGS_OFFSET
        s32i    a6, a3, EXC_TABLE_FIXUP
        s32i    a7, a3, EXC_TABLE_KSTK

        /* restore context of the task that 'next' addresses */

        l32i    a0, a13, THREAD_RA      # restore return address
        l32i    a1, a13, THREAD_SP      # restore stack pointer

        load_xtregs_user a5 a6 a8 a9 a10 a11 THREAD_XTREGS_USER

        wsr     a14, PS
        mov     a2, a12                 # return 'prev'
        rsync

        retw


ENTRY(ret_from_fork)

        /* void schedule_tail (struct task_struct *prev)
         * Note: prev is still in a6 (return value from fake call4 frame)
         */
        movi    a4, schedule_tail
        callx4  a4

        movi    a4, do_syscall_trace_leave
        mov     a6, a1
        callx4  a4

        j       common_exception_return