git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/cypress_m8.c

   1 /*
   2  * USB Cypress M8 driver
   3  *
   4  *      Copyright (C) 2004
   5  *          Lonnie Mendez (dignome@gmail.com)
   6  *      Copyright (C) 2003,2004
   7  *          Neil Whelchel (koyama@firstlight.net)
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  * See Documentation/usb/usb-serial.txt for more information on using this
  15  * driver
  16  *
  17  * See http://geocities.com/i0xox0i for information on this driver and the
  18  * earthmate usb device.
  19  *
  20  *  Lonnie Mendez <dignome@gmail.com>
  21  *  4-29-2005
  22  *      Fixed problem where setting or retreiving the serial config would fail
  23  *      with EPIPE.  Removed CRTS toggling so the driver behaves more like
  24  *      other usbserial adapters.  Issued new interval of 1ms instead of the
  25  *      default 10ms.  As a result, transfer speed has been substantially
  26  *      increased from avg. 850bps to avg. 3300bps.  initial termios has also
  27  *      been modified.  Cleaned up code and formatting issues so it is more
  28  *      readable.  Replaced the C++ style comments.
  29  *
  30  *  Lonnie Mendez <dignome@gmail.com>
  31  *  12-15-2004
  32  *      Incorporated write buffering from pl2303 driver.  Fixed bug with line
  33  *      handling so both lines are raised in cypress_open. (was dropping rts)
  34  *      Various code cleanups made as well along with other misc bug fixes.
  35  *
  36  *  Lonnie Mendez <dignome@gmail.com>
  37  *  04-10-2004
  38  *      Driver modified to support dynamic line settings.  Various improvments
  39  *      and features.
  40  *
  41  *  Neil Whelchel
  42  *  10-2003
  43  *      Driver first released.
  44  *
  45  */
  46
  47 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation
  48    for linux. */
  49 /* Thanks to cypress for providing references for the hid reports. */
  50 /* Thanks to Jiang Zhang for providing links and for general help. */
  51 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
  52
  53
  54 #include <linux/kernel.h>
  55 #include <linux/errno.h>
  56 #include <linux/init.h>
  57 #include <linux/slab.h>
  58 #include <linux/tty.h>
  59 #include <linux/tty_driver.h>
  60 #include <linux/tty_flip.h>
  61 #include <linux/module.h>
  62 #include <linux/moduleparam.h>
  63 #include <linux/spinlock.h>
  64 #include <linux/usb.h>
  65 #include <linux/usb/serial.h>
  66 #include <linux/serial.h>
  67 #include <linux/delay.h>
  68 #include <linux/uaccess.h>
  69
  70 #include "cypress_m8.h"
  71
  72
  73 #ifdef CONFIG_USB_SERIAL_DEBUG
  74         static int debug = 1;
  75 #else
  76         static int debug;
  77 #endif
  78 static int stats;
  79 static int interval;
  80
  81 /*
  82  * Version Information
  83  */
  84 #define DRIVER_VERSION "v1.09"
  85 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
  86 #define DRIVER_DESC "Cypress USB to Serial Driver"
  87
  88 /* write buffer size defines */
  89 #define CYPRESS_BUF_SIZE        1024
  90 #define CYPRESS_CLOSING_WAIT    (30*HZ)
  91
  92 static struct usb_device_id id_table_earthmate [] = {
  93         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
  94         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
  95         { }                                             /* Terminating entry */
  96 };
  97
  98 static struct usb_device_id id_table_cyphidcomrs232 [] = {
  99         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 100         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 101         { }                                             /* Terminating entry */
 102 };
 103
 104 static struct usb_device_id id_table_nokiaca42v2 [] = {
 105         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 106         { }                                             /* Terminating entry */
 107 };
 108
 109 static struct usb_device_id id_table_combined [] = {
 110         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 111         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 112         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 113         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 114         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 115         { }                                             /* Terminating entry */
 116 };
 117
 118 MODULE_DEVICE_TABLE(usb, id_table_combined);
 119
 120 static struct usb_driver cypress_driver = {
 121         .name =         "cypress",
 122         .probe =        usb_serial_probe,
 123         .disconnect =   usb_serial_disconnect,
 124         .id_table =     id_table_combined,
 125         .no_dynamic_id =        1,
 126 };
 127
 128 enum packet_format {
 129         packet_format_1,  /* b0:status, b1:payload count */
 130         packet_format_2   /* b0[7:3]:status, b0[2:0]:payload count */
 131 };
 132
 133 struct cypress_private {
 134         spinlock_t lock;                   /* private lock */
 135         int chiptype;                      /* identifier of device, for quirks/etc */
 136         int bytes_in;                      /* used for statistics */
 137         int bytes_out;                     /* used for statistics */
 138         int cmd_count;                     /* used for statistics */
 139         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
 140         struct cypress_buf *buf;           /* write buffer */
 141         int write_urb_in_use;              /* write urb in use indicator */
 142         int write_urb_interval;            /* interval to use for write urb */
 143         int read_urb_interval;             /* interval to use for read urb */
 144         int comm_is_ok;                    /* true if communication is (still) ok */
 145         int termios_initialized;
 146         __u8 line_control;                 /* holds dtr / rts value */
 147         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
 148         __u8 current_config;               /* stores the current configuration byte */
 149         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
 150         enum packet_format pkt_fmt;        /* format to use for packet send / receive */
 151         int get_cfg_unsafe;                /* If true, the CYPRESS_GET_CONFIG is unsafe */
 152         int baud_rate;                     /* stores current baud rate in
 153                                               integer form */
 154         int isthrottled;                   /* if throttled, discard reads */
 155         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 156         char prev_status, diff_status;     /* used for TIOCMIWAIT */
 157         /* we pass a pointer to this as the arguement sent to
 158            cypress_set_termios old_termios */
 159         struct ktermios tmp_termios;       /* stores the old termios settings */
 160 };
 161
 162 /* write buffer structure */
 163 struct cypress_buf {
 164         unsigned int    buf_size;
 165         char            *buf_buf;
 166         char            *buf_get;
 167         char            *buf_put;
 168 };
 169
 170 /* function prototypes for the Cypress USB to serial device */
 171 static int  cypress_earthmate_startup(struct usb_serial *serial);
 172 static int  cypress_hidcom_startup(struct usb_serial *serial);
 173 static int  cypress_ca42v2_startup(struct usb_serial *serial);
 174 static void cypress_shutdown(struct usb_serial *serial);
 175 static int  cypress_open(struct tty_struct *tty,
 176                         struct usb_serial_port *port, struct file *filp);
 177 static void cypress_close(struct tty_struct *tty,
 178                         struct usb_serial_port *port, struct file *filp);
 179 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 180                         const unsigned char *buf, int count);
 181 static void cypress_send(struct usb_serial_port *port);
 182 static int  cypress_write_room(struct tty_struct *tty);
 183 static int  cypress_ioctl(struct tty_struct *tty, struct file *file,
 184                         unsigned int cmd, unsigned long arg);
 185 static void cypress_set_termios(struct tty_struct *tty,
 186                         struct usb_serial_port *port, struct ktermios *old);
 187 static int  cypress_tiocmget(struct tty_struct *tty, struct file *file);
 188 static int  cypress_tiocmset(struct tty_struct *tty, struct file *file,
 189                         unsigned int set, unsigned int clear);
 190 static int  cypress_chars_in_buffer(struct tty_struct *tty);
 191 static void cypress_throttle(struct tty_struct *tty);
 192 static void cypress_unthrottle(struct tty_struct *tty);
 193 static void cypress_set_dead(struct usb_serial_port *port);
 194 static void cypress_read_int_callback(struct urb *urb);
 195 static void cypress_write_int_callback(struct urb *urb);
 196 /* write buffer functions */
 197 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
 198 static void cypress_buf_free(struct cypress_buf *cb);
 199 static void cypress_buf_clear(struct cypress_buf *cb);
 200 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
 201 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
 202 static unsigned int cypress_buf_put(struct cypress_buf *cb,
 203                                         const char *buf, unsigned int count);
 204 static unsigned int cypress_buf_get(struct cypress_buf *cb,
 205                                         char *buf, unsigned int count);
 206
 207
 208 static struct usb_serial_driver cypress_earthmate_device = {
 209         .driver = {
 210                 .owner =                THIS_MODULE,
 211                 .name =                 "earthmate",
 212         },
 213         .description =                  "DeLorme Earthmate USB",
 214         .usb_driver =                   &cypress_driver,
 215         .id_table =                     id_table_earthmate,
 216         .num_ports =                    1,
 217         .attach =                       cypress_earthmate_startup,
 218         .shutdown =                     cypress_shutdown,
 219         .open =                         cypress_open,
 220         .close =                        cypress_close,
 221         .write =                        cypress_write,
 222         .write_room =                   cypress_write_room,
 223         .ioctl =                        cypress_ioctl,
 224         .set_termios =                  cypress_set_termios,
 225         .tiocmget =                     cypress_tiocmget,
 226         .tiocmset =                     cypress_tiocmset,
 227         .chars_in_buffer =              cypress_chars_in_buffer,
 228         .throttle =                     cypress_throttle,
 229         .unthrottle =                   cypress_unthrottle,
 230         .read_int_callback =            cypress_read_int_callback,
 231         .write_int_callback =           cypress_write_int_callback,
 232 };
 233
 234 static struct usb_serial_driver cypress_hidcom_device = {
 235         .driver = {
 236                 .owner =                THIS_MODULE,
 237                 .name =                 "cyphidcom",
 238         },
 239         .description =                  "HID->COM RS232 Adapter",
 240         .usb_driver =                   &cypress_driver,
 241         .id_table =                     id_table_cyphidcomrs232,
 242         .num_ports =                    1,
 243         .attach =                       cypress_hidcom_startup,
 244         .shutdown =                     cypress_shutdown,
 245         .open =                         cypress_open,
 246         .close =                        cypress_close,
 247         .write =                        cypress_write,
 248         .write_room =                   cypress_write_room,
 249         .ioctl =                        cypress_ioctl,
 250         .set_termios =                  cypress_set_termios,
 251         .tiocmget =                     cypress_tiocmget,
 252         .tiocmset =                     cypress_tiocmset,
 253         .chars_in_buffer =              cypress_chars_in_buffer,
 254         .throttle =                     cypress_throttle,
 255         .unthrottle =                   cypress_unthrottle,
 256         .read_int_callback =            cypress_read_int_callback,
 257         .write_int_callback =           cypress_write_int_callback,
 258 };
 259
 260 static struct usb_serial_driver cypress_ca42v2_device = {
 261         .driver = {
 262                 .owner =                THIS_MODULE,
 263                 .name =                 "nokiaca42v2",
 264         },
 265         .description =                  "Nokia CA-42 V2 Adapter",
 266         .usb_driver =                   &cypress_driver,
 267         .id_table =                     id_table_nokiaca42v2,
 268         .num_ports =                    1,
 269         .attach =                       cypress_ca42v2_startup,
 270         .shutdown =                     cypress_shutdown,
 271         .open =                         cypress_open,
 272         .close =                        cypress_close,
 273         .write =                        cypress_write,
 274         .write_room =                   cypress_write_room,
 275         .ioctl =                        cypress_ioctl,
 276         .set_termios =                  cypress_set_termios,
 277         .tiocmget =                     cypress_tiocmget,
 278         .tiocmset =                     cypress_tiocmset,
 279         .chars_in_buffer =              cypress_chars_in_buffer,
 280         .throttle =                     cypress_throttle,
 281         .unthrottle =                   cypress_unthrottle,
 282         .read_int_callback =            cypress_read_int_callback,
 283         .write_int_callback =           cypress_write_int_callback,
 284 };
 285
 286 /*****************************************************************************
 287  * Cypress serial helper functions
 288  *****************************************************************************/
 289
 290
 291 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 292 {
 293         struct cypress_private *priv;
 294         priv = usb_get_serial_port_data(port);
 295
 296         /*
 297          * The general purpose firmware for the Cypress M8 allows for
 298          * a maximum speed of 57600bps (I have no idea whether DeLorme
 299          * chose to use the general purpose firmware or not), if you
 300          * need to modify this speed setting for your own project
 301          * please add your own chiptype and modify the code likewise.
 302          * The Cypress HID->COM device will work successfully up to
 303          * 115200bps (but the actual throughput is around 3kBps).
 304          */
 305         if (port->serial->dev->speed == USB_SPEED_LOW) {
 306                 /*
 307                  * Mike Isely <isely@pobox.com> 2-Feb-2008: The
 308                  * Cypress app note that describes this mechanism
 309                  * states the the low-speed part can't handle more
 310                  * than 800 bytes/sec, in which case 4800 baud is the
 311                  * safest speed for a part like that.
 312                  */
 313                 if (new_rate > 4800) {
 314                         dbg("%s - failed setting baud rate, device incapable "
 315                             "speed %d", __func__, new_rate);
 316                         return -1;
 317                 }
 318         }
 319         switch (priv->chiptype) {
 320         case CT_EARTHMATE:
 321                 if (new_rate <= 600) {
 322                         /* 300 and 600 baud rates are supported under
 323                          * the generic firmware, but are not used with
 324                          * NMEA and SiRF protocols */
 325                         dbg("%s - failed setting baud rate, unsupported speed "
 326                             "of %d on Earthmate GPS", __func__, new_rate);
 327                         return -1;
 328                 }
 329                 break;
 330         default:
 331                 break;
 332         }
 333         return new_rate;
 334 }
 335
 336
 337 /* This function can either set or retrieve the current serial line settings */
 338 static int cypress_serial_control(struct tty_struct *tty,
 339         struct usb_serial_port *port, speed_t baud_rate, int data_bits,
 340         int stop_bits, int parity_enable, int parity_type, int reset,
 341         int cypress_request_type)
 342 {
 343         int new_baudrate = 0, retval = 0, tries = 0;
 344         struct cypress_private *priv;
 345         __u8 feature_buffer[5];
 346         unsigned long flags;
 347
 348         dbg("%s", __func__);
 349
 350         priv = usb_get_serial_port_data(port);
 351
 352         if (!priv->comm_is_ok)
 353                 return -ENODEV;
 354
 355         switch (cypress_request_type) {
 356         case CYPRESS_SET_CONFIG:
 357                 new_baudrate = priv->baud_rate;
 358                 /* 0 means 'Hang up' so doesn't change the true bit rate */
 359                 if (baud_rate == 0)
 360                         new_baudrate = priv->baud_rate;
 361                 /* Change of speed ? */
 362                 else if (baud_rate != priv->baud_rate) {
 363                         dbg("%s - baud rate is changing", __func__);
 364                         retval = analyze_baud_rate(port, baud_rate);
 365                         if (retval >=  0) {
 366                                 new_baudrate = retval;
 367                                 dbg("%s - New baud rate set to %d",
 368                                     __func__, new_baudrate);
 369                         }
 370                 }
 371                 dbg("%s - baud rate is being sent as %d",
 372                                         __func__, new_baudrate);
 373
 374                 memset(feature_buffer, 0, sizeof(feature_buffer));
 375                 /* fill the feature_buffer with new configuration */
 376                 *((u_int32_t *)feature_buffer) = new_baudrate;
 377                 feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 378                 /* 1 bit gap */
 379                 feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
 380                 feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
 381                 feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
 382                 /* 1 bit gap */
 383                 feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
 384
 385                 dbg("%s - device is being sent this feature report:",
 386                                                                 __func__);
 387                 dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__,
 388                         feature_buffer[0], feature_buffer[1],
 389                         feature_buffer[2], feature_buffer[3],
 390                         feature_buffer[4]);
 391
 392                 do {
 393                         retval = usb_control_msg(port->serial->dev,
 394                                         usb_sndctrlpipe(port->serial->dev, 0),
 395                                         HID_REQ_SET_REPORT,
 396                                         USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 397                                         0x0300, 0, feature_buffer,
 398                                         sizeof(feature_buffer), 500);
 399
 400                         if (tries++ >= 3)
 401                                 break;
 402
 403                 } while (retval != sizeof(feature_buffer) &&
 404                          retval != -ENODEV);
 405
 406                 if (retval != sizeof(feature_buffer)) {
 407                         dev_err(&port->dev, "%s - failed sending serial "
 408                                 "line settings - %d\n", __func__, retval);
 409                         cypress_set_dead(port);
 410                 } else {
 411                         spin_lock_irqsave(&priv->lock, flags);
 412                         priv->baud_rate = new_baudrate;
 413                         priv->current_config = feature_buffer[4];
 414                         spin_unlock_irqrestore(&priv->lock, flags);
 415                         /* If we asked for a speed change encode it */
 416                         if (baud_rate)
 417                                 tty_encode_baud_rate(tty,
 418                                         new_baudrate, new_baudrate);
 419                 }
 420         break;
 421         case CYPRESS_GET_CONFIG:
 422                 if (priv->get_cfg_unsafe) {
 423                         /* Not implemented for this device,
 424                            and if we try to do it we're likely
 425                            to crash the hardware. */
 426                         return -ENOTTY;
 427                 }
 428                 dbg("%s - retreiving serial line settings", __func__);
 429                 /* set initial values in feature buffer */
 430                 memset(feature_buffer, 0, sizeof(feature_buffer));
 431
 432                 do {
 433                         retval = usb_control_msg(port->serial->dev,
 434                                         usb_rcvctrlpipe(port->serial->dev, 0),
 435                                         HID_REQ_GET_REPORT,
 436                                         USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 437                                         0x0300, 0, feature_buffer,
 438                                         sizeof(feature_buffer), 500);
 439
 440                         if (tries++ >= 3)
 441                                 break;
 442                 } while (retval != sizeof(feature_buffer)
 443                                                 && retval != -ENODEV);
 444
 445                 if (retval != sizeof(feature_buffer)) {
 446                         dev_err(&port->dev, "%s - failed to retrieve serial "
 447                                 "line settings - %d\n", __func__, retval);
 448                         cypress_set_dead(port);
 449                         return retval;
 450                 } else {
 451                         spin_lock_irqsave(&priv->lock, flags);
 452                         /* store the config in one byte, and later
 453                            use bit masks to check values */
 454                         priv->current_config = feature_buffer[4];
 455                         priv->baud_rate = *((u_int32_t *)feature_buffer);
 456                         spin_unlock_irqrestore(&priv->lock, flags);
 457                 }
 458         }
 459         spin_lock_irqsave(&priv->lock, flags);
 460         ++priv->cmd_count;
 461         spin_unlock_irqrestore(&priv->lock, flags);
 462
 463         return retval;
 464 } /* cypress_serial_control */
 465
 466
 467 static void cypress_set_dead(struct usb_serial_port *port)
 468 {
 469         struct cypress_private *priv = usb_get_serial_port_data(port);
 470         unsigned long flags;
 471
 472         spin_lock_irqsave(&priv->lock, flags);
 473         if (!priv->comm_is_ok) {
 474                 spin_unlock_irqrestore(&priv->lock, flags);
 475                 return;
 476         }
 477         priv->comm_is_ok = 0;
 478         spin_unlock_irqrestore(&priv->lock, flags);
 479
 480         dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
 481                 "interval might be too short\n", port->number);
 482 }
 483
 484
 485 /*****************************************************************************
 486  * Cypress serial driver functions
 487  *****************************************************************************/
 488
 489
 490 static int generic_startup(struct usb_serial *serial)
 491 {
 492         struct cypress_private *priv;
 493         struct usb_serial_port *port = serial->port[0];
 494
 495         dbg("%s - port %d", __func__, port->number);
 496
 497         priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 498         if (!priv)
 499                 return -ENOMEM;
 500
 501         priv->comm_is_ok = !0;
 502         spin_lock_init(&priv->lock);
 503         priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
 504         if (priv->buf == NULL) {
 505                 kfree(priv);
 506                 return -ENOMEM;
 507         }
 508         init_waitqueue_head(&priv->delta_msr_wait);
 509
 510         usb_reset_configuration(serial->dev);
 511
 512         priv->cmd_ctrl = 0;
 513         priv->line_control = 0;
 514         priv->termios_initialized = 0;
 515         priv->rx_flags = 0;
 516         /* Default packet format setting is determined by packet size.
 517            Anything with a size larger then 9 must have a separate
 518            count field since the 3 bit count field is otherwise too
 519            small.  Otherwise we can use the slightly more compact
 520            format.  This is in accordance with the cypress_m8 serial
 521            converter app note. */
 522         if (port->interrupt_out_size > 9)
 523                 priv->pkt_fmt = packet_format_1;
 524         else
 525                 priv->pkt_fmt = packet_format_2;
 526
 527         if (interval > 0) {
 528                 priv->write_urb_interval = interval;
 529                 priv->read_urb_interval = interval;
 530                 dbg("%s - port %d read & write intervals forced to %d",
 531                     __func__, port->number, interval);
 532         } else {
 533                 priv->write_urb_interval = port->interrupt_out_urb->interval;
 534                 priv->read_urb_interval = port->interrupt_in_urb->interval;
 535                 dbg("%s - port %d intervals: read=%d write=%d",
 536                     __func__, port->number,
 537                     priv->read_urb_interval, priv->write_urb_interval);
 538         }
 539         usb_set_serial_port_data(port, priv);
 540
 541         return 0;
 542 }
 543
 544
 545 static int cypress_earthmate_startup(struct usb_serial *serial)
 546 {
 547         struct cypress_private *priv;
 548         struct usb_serial_port *port = serial->port[0];
 549
 550         dbg("%s", __func__);
 551
 552         if (generic_startup(serial)) {
 553                 dbg("%s - Failed setting up port %d", __func__,
 554                                 port->number);
 555                 return 1;
 556         }
 557
 558         priv = usb_get_serial_port_data(port);
 559         priv->chiptype = CT_EARTHMATE;
 560         /* All Earthmate devices use the separated-count packet
 561            format!  Idiotic. */
 562         priv->pkt_fmt = packet_format_1;
 563         if (serial->dev->descriptor.idProduct !=
 564                                 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
 565                 /* The old original USB Earthmate seemed able to
 566                    handle GET_CONFIG requests; everything they've
 567                    produced since that time crashes if this command is
 568                    attempted :-( */
 569                 dbg("%s - Marking this device as unsafe for GET_CONFIG "
 570                     "commands", __func__);
 571                 priv->get_cfg_unsafe = !0;
 572         }
 573
 574         return 0;
 575 } /* cypress_earthmate_startup */
 576
 577
 578 static int cypress_hidcom_startup(struct usb_serial *serial)
 579 {
 580         struct cypress_private *priv;
 581
 582         dbg("%s", __func__);
 583
 584         if (generic_startup(serial)) {
 585                 dbg("%s - Failed setting up port %d", __func__,
 586                                 serial->port[0]->number);
 587                 return 1;
 588         }
 589
 590         priv = usb_get_serial_port_data(serial->port[0]);
 591         priv->chiptype = CT_CYPHIDCOM;
 592
 593         return 0;
 594 } /* cypress_hidcom_startup */
 595
 596
 597 static int cypress_ca42v2_startup(struct usb_serial *serial)
 598 {
 599         struct cypress_private *priv;
 600
 601         dbg("%s", __func__);
 602
 603         if (generic_startup(serial)) {
 604                 dbg("%s - Failed setting up port %d", __func__,
 605                                 serial->port[0]->number);
 606                 return 1;
 607         }
 608
 609         priv = usb_get_serial_port_data(serial->port[0]);
 610         priv->chiptype = CT_CA42V2;
 611
 612         return 0;
 613 } /* cypress_ca42v2_startup */
 614
 615
 616 static void cypress_shutdown(struct usb_serial *serial)
 617 {
 618         struct cypress_private *priv;
 619
 620         dbg("%s - port %d", __func__, serial->port[0]->number);
 621
 622         /* all open ports are closed at this point */
 623
 624         priv = usb_get_serial_port_data(serial->port[0]);
 625
 626         if (priv) {
 627                 cypress_buf_free(priv->buf);
 628                 kfree(priv);
 629                 usb_set_serial_port_data(serial->port[0], NULL);
 630         }
 631 }
 632
 633
 634 static int cypress_open(struct tty_struct *tty,
 635                         struct usb_serial_port *port, struct file *filp)
 636 {
 637         struct cypress_private *priv = usb_get_serial_port_data(port);
 638         struct usb_serial *serial = port->serial;
 639         unsigned long flags;
 640         int result = 0;
 641
 642         dbg("%s - port %d", __func__, port->number);
 643
 644         if (!priv->comm_is_ok)
 645                 return -EIO;
 646
 647         /* clear halts before open */
 648         usb_clear_halt(serial->dev, 0x81);
 649         usb_clear_halt(serial->dev, 0x02);
 650
 651         spin_lock_irqsave(&priv->lock, flags);
 652         /* reset read/write statistics */
 653         priv->bytes_in = 0;
 654         priv->bytes_out = 0;
 655         priv->cmd_count = 0;
 656         priv->rx_flags = 0;
 657         spin_unlock_irqrestore(&priv->lock, flags);
 658
 659         /* setting to zero could cause data loss */
 660         if (tty)
 661                 tty->low_latency = 1;
 662
 663         /* raise both lines and set termios */
 664         spin_lock_irqsave(&priv->lock, flags);
 665         priv->line_control = CONTROL_DTR | CONTROL_RTS;
 666         priv->cmd_ctrl = 1;
 667         spin_unlock_irqrestore(&priv->lock, flags);
 668         result = cypress_write(tty, port, NULL, 0);
 669
 670         if (result) {
 671                 dev_err(&port->dev,
 672                         "%s - failed setting the control lines - error %d\n",
 673                                                         __func__, result);
 674                 return result;
 675         } else
 676                 dbg("%s - success setting the control lines", __func__);
 677
 678         if (tty)
 679                 cypress_set_termios(tty, port, &priv->tmp_termios);
 680
 681         /* setup the port and start reading from the device */
 682         if (!port->interrupt_in_urb) {
 683                 dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
 684                         __func__);
 685                 return -1;
 686         }
 687
 688         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 689                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 690                 port->interrupt_in_urb->transfer_buffer,
 691                 port->interrupt_in_urb->transfer_buffer_length,
 692                 cypress_read_int_callback, port, priv->read_urb_interval);
 693         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 694
 695         if (result) {
 696                 dev_err(&port->dev,
 697                         "%s - failed submitting read urb, error %d\n",
 698                                                         __func__, result);
 699                 cypress_set_dead(port);
 700         }
 701
 702         return result;
 703 } /* cypress_open */
 704
 705
 706 static void cypress_close(struct tty_struct *tty,
 707                         struct usb_serial_port *port, struct file *filp)
 708 {
 709         struct cypress_private *priv = usb_get_serial_port_data(port);
 710         unsigned int c_cflag;
 711         int bps;
 712         long timeout;
 713         wait_queue_t wait;
 714
 715         dbg("%s - port %d", __func__, port->number);
 716
 717         /* wait for data to drain from buffer */
 718         spin_lock_irq(&priv->lock);
 719         timeout = CYPRESS_CLOSING_WAIT;
 720         init_waitqueue_entry(&wait, current);
 721         add_wait_queue(&tty->write_wait, &wait);
 722         for (;;) {
 723                 set_current_state(TASK_INTERRUPTIBLE);
 724                 if (cypress_buf_data_avail(priv->buf) == 0
 725                 || timeout == 0 || signal_pending(current)
 726                 /* without mutex, allowed due to harmless failure mode */
 727                 || port->serial->disconnected)
 728                         break;
 729                 spin_unlock_irq(&priv->lock);
 730                 timeout = schedule_timeout(timeout);
 731                 spin_lock_irq(&priv->lock);
 732         }
 733         set_current_state(TASK_RUNNING);
 734         remove_wait_queue(&tty->write_wait, &wait);
 735         /* clear out any remaining data in the buffer */
 736         cypress_buf_clear(priv->buf);
 737         spin_unlock_irq(&priv->lock);
 738
 739         /* writing is potentially harmful, lock must be taken */
 740         mutex_lock(&port->serial->disc_mutex);
 741         if (port->serial->disconnected) {
 742                 mutex_unlock(&port->serial->disc_mutex);
 743                 return;
 744         }
 745         /* wait for characters to drain from device */
 746         if (tty) {
 747                 bps = tty_get_baud_rate(tty);
 748                 if (bps > 1200)
 749                         timeout = max((HZ * 2560) / bps, HZ / 10);
 750                 else
 751                         timeout = 2 * HZ;
 752                 schedule_timeout_interruptible(timeout);
 753         }
 754
 755         dbg("%s - stopping urbs", __func__);
 756         usb_kill_urb(port->interrupt_in_urb);
 757         usb_kill_urb(port->interrupt_out_urb);
 758
 759         if (tty) {
 760                 c_cflag = tty->termios->c_cflag;
 761                 if (c_cflag & HUPCL) {
 762                         /* drop dtr and rts */
 763                         priv = usb_get_serial_port_data(port);
 764                         spin_lock_irq(&priv->lock);
 765                         priv->line_control = 0;
 766                         priv->cmd_ctrl = 1;
 767                         spin_unlock_irq(&priv->lock);
 768                         cypress_write(tty, port, NULL, 0);
 769                 }
 770         }
 771
 772         if (stats)
 773                 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 774                         priv->bytes_in, priv->bytes_out, priv->cmd_count);
 775         mutex_unlock(&port->serial->disc_mutex);
 776 } /* cypress_close */
 777
 778
 779 static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 780                                         const unsigned char *buf, int count)
 781 {
 782         struct cypress_private *priv = usb_get_serial_port_data(port);
 783         unsigned long flags;
 784
 785         dbg("%s - port %d, %d bytes", __func__, port->number, count);
 786
 787         /* line control commands, which need to be executed immediately,
 788            are not put into the buffer for obvious reasons.
 789          */
 790         if (priv->cmd_ctrl) {
 791                 count = 0;
 792                 goto finish;
 793         }
 794
 795         if (!count)
 796                 return count;
 797
 798         spin_lock_irqsave(&priv->lock, flags);
 799         count = cypress_buf_put(priv->buf, buf, count);
 800         spin_unlock_irqrestore(&priv->lock, flags);
 801
 802 finish:
 803         cypress_send(port);
 804
 805         return count;
 806 } /* cypress_write */
 807
 808
 809 static void cypress_send(struct usb_serial_port *port)
 810 {
 811         int count = 0, result, offset, actual_size;
 812         struct cypress_private *priv = usb_get_serial_port_data(port);
 813         unsigned long flags;
 814
 815         if (!priv->comm_is_ok)
 816                 return;
 817
 818         dbg("%s - port %d", __func__, port->number);
 819         dbg("%s - interrupt out size is %d", __func__,
 820                                                 port->interrupt_out_size);
 821
 822         spin_lock_irqsave(&priv->lock, flags);
 823         if (priv->write_urb_in_use) {
 824                 dbg("%s - can't write, urb in use", __func__);
 825                 spin_unlock_irqrestore(&priv->lock, flags);
 826                 return;
 827         }
 828         spin_unlock_irqrestore(&priv->lock, flags);
 829
 830         /* clear buffer */
 831         memset(port->interrupt_out_urb->transfer_buffer, 0,
 832                                                 port->interrupt_out_size);
 833
 834         spin_lock_irqsave(&priv->lock, flags);
 835         switch (priv->pkt_fmt) {
 836         default:
 837         case packet_format_1:
 838                 /* this is for the CY7C64013... */
 839                 offset = 2;
 840                 port->interrupt_out_buffer[0] = priv->line_control;
 841                 break;
 842         case packet_format_2:
 843                 /* this is for the CY7C63743... */
 844                 offset = 1;
 845                 port->interrupt_out_buffer[0] = priv->line_control;
 846                 break;
 847         }
 848
 849         if (priv->line_control & CONTROL_RESET)
 850                 priv->line_control &= ~CONTROL_RESET;
 851
 852         if (priv->cmd_ctrl) {
 853                 priv->cmd_count++;
 854                 dbg("%s - line control command being issued", __func__);
 855                 spin_unlock_irqrestore(&priv->lock, flags);
 856                 goto send;
 857         } else
 858                 spin_unlock_irqrestore(&priv->lock, flags);
 859
 860         count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
 861                                 port->interrupt_out_size-offset);
 862
 863         if (count == 0)
 864                 return;
 865
 866         switch (priv->pkt_fmt) {
 867         default:
 868         case packet_format_1:
 869                 port->interrupt_out_buffer[1] = count;
 870                 break;
 871         case packet_format_2:
 872                 port->interrupt_out_buffer[0] |= count;
 873         }
 874
 875         dbg("%s - count is %d", __func__, count);
 876
 877 send:
 878         spin_lock_irqsave(&priv->lock, flags);
 879         priv->write_urb_in_use = 1;
 880         spin_unlock_irqrestore(&priv->lock, flags);
 881
 882         if (priv->cmd_ctrl)
 883                 actual_size = 1;
 884         else
 885                 actual_size = count +
 886                               (priv->pkt_fmt == packet_format_1 ? 2 : 1);
 887
 888         usb_serial_debug_data(debug, &port->dev, __func__,
 889                 port->interrupt_out_size,
 890                 port->interrupt_out_urb->transfer_buffer);
 891
 892         usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
 893                 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
 894                 port->interrupt_out_buffer, port->interrupt_out_size,
 895                 cypress_write_int_callback, port, priv->write_urb_interval);
 896         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 897         if (result) {
 898                 dev_err(&port->dev,
 899                                 "%s - failed submitting write urb, error %d\n",
 900                                                         __func__, result);
 901                 priv->write_urb_in_use = 0;
 902                 cypress_set_dead(port);
 903         }
 904
 905         spin_lock_irqsave(&priv->lock, flags);
 906         if (priv->cmd_ctrl)
 907                 priv->cmd_ctrl = 0;
 908
 909         /* do not count the line control and size bytes */
 910         priv->bytes_out += count;
 911         spin_unlock_irqrestore(&priv->lock, flags);
 912
 913         usb_serial_port_softint(port);
 914 } /* cypress_send */
 915
 916
 917 /* returns how much space is available in the soft buffer */
 918 static int cypress_write_room(struct tty_struct *tty)
 919 {
 920         struct usb_serial_port *port = tty->driver_data;
 921         struct cypress_private *priv = usb_get_serial_port_data(port);
 922         int room = 0;
 923         unsigned long flags;
 924
 925         dbg("%s - port %d", __func__, port->number);
 926
 927         spin_lock_irqsave(&priv->lock, flags);
 928         room = cypress_buf_space_avail(priv->buf);
 929         spin_unlock_irqrestore(&priv->lock, flags);
 930
 931         dbg("%s - returns %d", __func__, room);
 932         return room;
 933 }
 934
 935
 936 static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
 937 {
 938         struct usb_serial_port *port = tty->driver_data;
 939         struct cypress_private *priv = usb_get_serial_port_data(port);
 940         __u8 status, control;
 941         unsigned int result = 0;
 942         unsigned long flags;
 943
 944         dbg("%s - port %d", __func__, port->number);
 945
 946         spin_lock_irqsave(&priv->lock, flags);
 947         control = priv->line_control;
 948         status = priv->current_status;
 949         spin_unlock_irqrestore(&priv->lock, flags);
 950
 951         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
 952                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
 953                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 954                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 955                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
 956                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
 957
 958         dbg("%s - result = %x", __func__, result);
 959
 960         return result;
 961 }
 962
 963
 964 static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
 965                                unsigned int set, unsigned int clear)
 966 {
 967         struct usb_serial_port *port = tty->driver_data;
 968         struct cypress_private *priv = usb_get_serial_port_data(port);
 969         unsigned long flags;
 970
 971         dbg("%s - port %d", __func__, port->number);
 972
 973         spin_lock_irqsave(&priv->lock, flags);
 974         if (set & TIOCM_RTS)
 975                 priv->line_control |= CONTROL_RTS;
 976         if (set & TIOCM_DTR)
 977                 priv->line_control |= CONTROL_DTR;
 978         if (clear & TIOCM_RTS)
 979                 priv->line_control &= ~CONTROL_RTS;
 980         if (clear & TIOCM_DTR)
 981                 priv->line_control &= ~CONTROL_DTR;
 982         priv->cmd_ctrl = 1;
 983         spin_unlock_irqrestore(&priv->lock, flags);
 984
 985         return cypress_write(tty, port, NULL, 0);
 986 }
 987
 988
 989 static int cypress_ioctl(struct tty_struct *tty, struct file *file,
 990                                         unsigned int cmd, unsigned long arg)
 991 {
 992         struct usb_serial_port *port = tty->driver_data;
 993         struct cypress_private *priv = usb_get_serial_port_data(port);
 994
 995         dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 996
 997         switch (cmd) {
 998         /* This code comes from drivers/char/serial.c and ftdi_sio.c */
 999         case TIOCMIWAIT:
1000                 while (priv != NULL) {
1001                         interruptible_sleep_on(&priv->delta_msr_wait);
1002                         /* see if a signal did it */
1003                         if (signal_pending(current))
1004                                 return -ERESTARTSYS;
1005                         else {
1006                                 char diff = priv->diff_status;
1007                                 if (diff == 0)
1008                                         return -EIO; /* no change => error */
1009
1010                                 /* consume all events */
1011                                 priv->diff_status = 0;
1012
1013                                 /* return 0 if caller wanted to know about
1014                                    these bits */
1015                                 if (((arg & TIOCM_RNG) && (diff & UART_RI)) ||
1016                                     ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
1017                                     ((arg & TIOCM_CD) && (diff & UART_CD)) ||
1018                                     ((arg & TIOCM_CTS) && (diff & UART_CTS)))
1019                                         return 0;
1020                                 /* otherwise caller can't care less about what
1021                                  * happened, and so we continue to wait for
1022                                  * more events.
1023                                  */
1024                         }
1025                 }
1026                 return 0;
1027         default:
1028                 break;
1029         }
1030         dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
1031         return -ENOIOCTLCMD;
1032 } /* cypress_ioctl */
1033
1034
1035 static void cypress_set_termios(struct tty_struct *tty,
1036         struct usb_serial_port *port, struct ktermios *old_termios)
1037 {
1038         struct cypress_private *priv = usb_get_serial_port_data(port);
1039         int data_bits, stop_bits, parity_type, parity_enable;
1040         unsigned cflag, iflag;
1041         unsigned long flags;
1042         __u8 oldlines;
1043         int linechange = 0;
1044
1045         dbg("%s - port %d", __func__, port->number);
1046
1047         spin_lock_irqsave(&priv->lock, flags);
1048         if (!priv->termios_initialized) {
1049                 if (priv->chiptype == CT_EARTHMATE) {
1050                         *(tty->termios) = tty_std_termios;
1051                         tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
1052                                 CLOCAL;
1053                         tty->termios->c_ispeed = 4800;
1054                         tty->termios->c_ospeed = 4800;
1055                 } else if (priv->chiptype == CT_CYPHIDCOM) {
1056                         *(tty->termios) = tty_std_termios;
1057                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1058                                 CLOCAL;
1059                         tty->termios->c_ispeed = 9600;
1060                         tty->termios->c_ospeed = 9600;
1061                 } else if (priv->chiptype == CT_CA42V2) {
1062                         *(tty->termios) = tty_std_termios;
1063                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1064                                 CLOCAL;
1065                         tty->termios->c_ispeed = 9600;
1066                         tty->termios->c_ospeed = 9600;
1067                 }
1068                 priv->termios_initialized = 1;
1069         }
1070         spin_unlock_irqrestore(&priv->lock, flags);
1071
1072         /* Unsupported features need clearing */
1073         tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
1074
1075         cflag = tty->termios->c_cflag;
1076         iflag = tty->termios->c_iflag;
1077
1078         /* check if there are new settings */
1079         if (old_termios) {
1080                 spin_lock_irqsave(&priv->lock, flags);
1081                 priv->tmp_termios = *(tty->termios);
1082                 spin_unlock_irqrestore(&priv->lock, flags);
1083         }
1084
1085         /* set number of data bits, parity, stop bits */
1086         /* when parity is disabled the parity type bit is ignored */
1087
1088         /* 1 means 2 stop bits, 0 means 1 stop bit */
1089         stop_bits = cflag & CSTOPB ? 1 : 0;
1090
1091         if (cflag & PARENB) {
1092                 parity_enable = 1;
1093                 /* 1 means odd parity, 0 means even parity */
1094                 parity_type = cflag & PARODD ? 1 : 0;
1095         } else
1096                 parity_enable = parity_type = 0;
1097
1098         switch (cflag & CSIZE) {
1099         case CS5:
1100                 data_bits = 0;
1101                 break;
1102         case CS6:
1103                 data_bits = 1;
1104                 break;
1105         case CS7:
1106                 data_bits = 2;
1107                 break;
1108         case CS8:
1109                 data_bits = 3;
1110                 break;
1111         default:
1112                 dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n",
1113                         __func__);
1114                 data_bits = 3;
1115         }
1116         spin_lock_irqsave(&priv->lock, flags);
1117         oldlines = priv->line_control;
1118         if ((cflag & CBAUD) == B0) {
1119                 /* drop dtr and rts */
1120                 dbg("%s - dropping the lines, baud rate 0bps", __func__);
1121                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
1122         } else
1123                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1124         spin_unlock_irqrestore(&priv->lock, flags);
1125
1126         dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1127                         "%d data_bits (+5)", __func__, stop_bits,
1128                         parity_enable, parity_type, data_bits);
1129
1130         cypress_serial_control(tty, port, tty_get_baud_rate(tty),
1131                         data_bits, stop_bits,
1132                         parity_enable, parity_type,
1133                         0, CYPRESS_SET_CONFIG);
1134
1135         /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1136          * filled into the private structure this should confirm that all is
1137          * working if it returns what we just set */
1138         cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1139
1140         /* Here we can define custom tty settings for devices; the main tty
1141          * termios flag base comes from empeg.c */
1142
1143         spin_lock_irqsave(&priv->lock, flags);
1144         if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
1145                 dbg("Using custom termios settings for a baud rate of "
1146                                 "4800bps.");
1147                 /* define custom termios settings for NMEA protocol */
1148
1149                 tty->termios->c_iflag /* input modes - */
1150                         &= ~(IGNBRK  /* disable ignore break */
1151                         | BRKINT     /* disable break causes interrupt */
1152                         | PARMRK     /* disable mark parity errors */
1153                         | ISTRIP     /* disable clear high bit of input char */
1154                         | INLCR      /* disable translate NL to CR */
1155                         | IGNCR      /* disable ignore CR */
1156                         | ICRNL      /* disable translate CR to NL */
1157                         | IXON);     /* disable enable XON/XOFF flow control */
1158
1159                 tty->termios->c_oflag /* output modes */
1160                         &= ~OPOST;    /* disable postprocess output char */
1161
1162                 tty->termios->c_lflag /* line discipline modes */
1163                         &= ~(ECHO     /* disable echo input characters */
1164                         | ECHONL      /* disable echo new line */
1165                         | ICANON      /* disable erase, kill, werase, and rprnt
1166                                          special characters */
1167                         | ISIG        /* disable interrupt, quit, and suspend
1168                                          special characters */
1169                         | IEXTEN);    /* disable non-POSIX special characters */
1170         } /* CT_CYPHIDCOM: Application should handle this for device */
1171
1172         linechange = (priv->line_control != oldlines);
1173         spin_unlock_irqrestore(&priv->lock, flags);
1174
1175         /* if necessary, set lines */
1176         if (linechange) {
1177                 priv->cmd_ctrl = 1;
1178                 cypress_write(tty, port, NULL, 0);
1179         }
1180 } /* cypress_set_termios */
1181
1182
1183 /* returns amount of data still left in soft buffer */
1184 static int cypress_chars_in_buffer(struct tty_struct *tty)
1185 {
1186         struct usb_serial_port *port = tty->driver_data;
1187         struct cypress_private *priv = usb_get_serial_port_data(port);
1188         int chars = 0;
1189         unsigned long flags;
1190
1191         dbg("%s - port %d", __func__, port->number);
1192
1193         spin_lock_irqsave(&priv->lock, flags);
1194         chars = cypress_buf_data_avail(priv->buf);
1195         spin_unlock_irqrestore(&priv->lock, flags);
1196
1197         dbg("%s - returns %d", __func__, chars);
1198         return chars;
1199 }
1200
1201
1202 static void cypress_throttle(struct tty_struct *tty)
1203 {
1204         struct usb_serial_port *port = tty->driver_data;
1205         struct cypress_private *priv = usb_get_serial_port_data(port);
1206         unsigned long flags;
1207
1208         dbg("%s - port %d", __func__, port->number);
1209
1210         spin_lock_irqsave(&priv->lock, flags);
1211         priv->rx_flags = THROTTLED;
1212         spin_unlock_irqrestore(&priv->lock, flags);
1213 }
1214
1215
1216 static void cypress_unthrottle(struct tty_struct *tty)
1217 {
1218         struct usb_serial_port *port = tty->driver_data;
1219         struct cypress_private *priv = usb_get_serial_port_data(port);
1220         int actually_throttled, result;
1221         unsigned long flags;
1222
1223         dbg("%s - port %d", __func__, port->number);
1224
1225         spin_lock_irqsave(&priv->lock, flags);
1226         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1227         priv->rx_flags = 0;
1228         spin_unlock_irqrestore(&priv->lock, flags);
1229
1230         if (!priv->comm_is_ok)
1231                 return;
1232
1233         if (actually_throttled) {
1234                 port->interrupt_in_urb->dev = port->serial->dev;
1235
1236                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1237                 if (result) {
1238                         dev_err(&port->dev, "%s - failed submitting read urb, "
1239                                         "error %d\n", __func__, result);
1240                         cypress_set_dead(port);
1241                 }
1242         }
1243 }
1244
1245
1246 static void cypress_read_int_callback(struct urb *urb)
1247 {
1248         struct usb_serial_port *port = urb->context;
1249         struct cypress_private *priv = usb_get_serial_port_data(port);
1250         struct tty_struct *tty;
1251         unsigned char *data = urb->transfer_buffer;
1252         unsigned long flags;
1253         char tty_flag = TTY_NORMAL;
1254         int havedata = 0;
1255         int bytes = 0;
1256         int result;
1257         int i = 0;
1258         int status = urb->status;
1259
1260         dbg("%s - port %d", __func__, port->number);
1261
1262         switch (status) {
1263         case 0: /* success */
1264                 break;
1265         case -ECONNRESET:
1266         case -ENOENT:
1267         case -ESHUTDOWN:
1268                 /* precursor to disconnect so just go away */
1269                 return;
1270         case -EPIPE:
1271                 usb_clear_halt(port->serial->dev, 0x81);
1272                 break;
1273         default:
1274                 /* something ugly is going on... */
1275                 dev_err(&urb->dev->dev,
1276                         "%s - unexpected nonzero read status received: %d\n",
1277                                                         __func__, status);
1278                 cypress_set_dead(port);
1279                 return;
1280         }
1281
1282         spin_lock_irqsave(&priv->lock, flags);
1283         if (priv->rx_flags & THROTTLED) {
1284                 dbg("%s - now throttling", __func__);
1285                 priv->rx_flags |= ACTUALLY_THROTTLED;
1286                 spin_unlock_irqrestore(&priv->lock, flags);
1287                 return;
1288         }
1289         spin_unlock_irqrestore(&priv->lock, flags);
1290
1291         tty = tty_port_tty_get(&port->port);
1292         if (!tty) {
1293                 dbg("%s - bad tty pointer - exiting", __func__);
1294                 return;
1295         }
1296
1297         spin_lock_irqsave(&priv->lock, flags);
1298         result = urb->actual_length;
1299         switch (priv->pkt_fmt) {
1300         default:
1301         case packet_format_1:
1302                 /* This is for the CY7C64013... */
1303                 priv->current_status = data[0] & 0xF8;
1304                 bytes = data[1] + 2;
1305                 i = 2;
1306                 if (bytes > 2)
1307                         havedata = 1;
1308                 break;
1309         case packet_format_2:
1310                 /* This is for the CY7C63743... */
1311                 priv->current_status = data[0] & 0xF8;
1312                 bytes = (data[0] & 0x07) + 1;
1313                 i = 1;
1314                 if (bytes > 1)
1315                         havedata = 1;
1316                 break;
1317         }
1318         spin_unlock_irqrestore(&priv->lock, flags);
1319         if (result < bytes) {
1320                 dbg("%s - wrong packet size - received %d bytes but packet "
1321                     "said %d bytes", __func__, result, bytes);
1322                 goto continue_read;
1323         }
1324
1325         usb_serial_debug_data(debug, &port->dev, __func__,
1326                                                 urb->actual_length, data);
1327
1328         spin_lock_irqsave(&priv->lock, flags);
1329         /* check to see if status has changed */
1330         if (priv->current_status != priv->prev_status) {
1331                 priv->diff_status |= priv->current_status ^
1332                         priv->prev_status;
1333                 wake_up_interruptible(&priv->delta_msr_wait);
1334                 priv->prev_status = priv->current_status;
1335         }
1336         spin_unlock_irqrestore(&priv->lock, flags);
1337
1338         /* hangup, as defined in acm.c... this might be a bad place for it
1339          * though */
1340         if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1341                         !(priv->current_status & UART_CD)) {
1342                 dbg("%s - calling hangup", __func__);
1343                 tty_hangup(tty);
1344                 goto continue_read;
1345         }
1346
1347         /* There is one error bit... I'm assuming it is a parity error
1348          * indicator as the generic firmware will set this bit to 1 if a
1349          * parity error occurs.
1350          * I can not find reference to any other error events. */
1351         spin_lock_irqsave(&priv->lock, flags);
1352         if (priv->current_status & CYP_ERROR) {
1353                 spin_unlock_irqrestore(&priv->lock, flags);
1354                 tty_flag = TTY_PARITY;
1355                 dbg("%s - Parity Error detected", __func__);
1356         } else
1357                 spin_unlock_irqrestore(&priv->lock, flags);
1358
1359         /* process read if there is data other than line status */
1360         if (tty && (bytes > i)) {
1361                 bytes = tty_buffer_request_room(tty, bytes);
1362                 for (; i < bytes ; ++i) {
1363                         dbg("pushing byte number %d - %d - %c", i, data[i],
1364                                         data[i]);
1365                         tty_insert_flip_char(tty, data[i], tty_flag);
1366                 }
1367                 tty_flip_buffer_push(tty);
1368         }
1369
1370         spin_lock_irqsave(&priv->lock, flags);
1371         /* control and status byte(s) are also counted */
1372         priv->bytes_in += bytes;
1373         spin_unlock_irqrestore(&priv->lock, flags);
1374
1375 continue_read:
1376         tty_kref_put(tty);
1377
1378         /* Continue trying to always read... unless the port has closed. */
1379
1380         if (port->port.count > 0 && priv->comm_is_ok) {
1381                 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1382                                 usb_rcvintpipe(port->serial->dev,
1383                                         port->interrupt_in_endpointAddress),
1384                                 port->interrupt_in_urb->transfer_buffer,
1385                                 port->interrupt_in_urb->transfer_buffer_length,
1386                                 cypress_read_int_callback, port,
1387                                 priv->read_urb_interval);
1388                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1389                 if (result) {
1390                         dev_err(&urb->dev->dev, "%s - failed resubmitting "
1391                                         "read urb, error %d\n", __func__,
1392                                         result);
1393                         cypress_set_dead(port);
1394                 }
1395         }
1396
1397         return;
1398 } /* cypress_read_int_callback */
1399
1400
1401 static void cypress_write_int_callback(struct urb *urb)
1402 {
1403         struct usb_serial_port *port = urb->context;
1404         struct cypress_private *priv = usb_get_serial_port_data(port);
1405         int result;
1406         int status = urb->status;
1407
1408         dbg("%s - port %d", __func__, port->number);
1409
1410         switch (status) {
1411         case 0:
1412                 /* success */
1413                 break;
1414         case -ECONNRESET:
1415         case -ENOENT:
1416         case -ESHUTDOWN:
1417                 /* this urb is terminated, clean up */
1418                 dbg("%s - urb shutting down with status: %d",
1419                                                 __func__, status);
1420                 priv->write_urb_in_use = 0;
1421                 return;
1422         case -EPIPE: /* no break needed; clear halt and resubmit */
1423                 if (!priv->comm_is_ok)
1424                         break;
1425                 usb_clear_halt(port->serial->dev, 0x02);
1426                 /* error in the urb, so we have to resubmit it */
1427                 dbg("%s - nonzero write bulk status received: %d",
1428                         __func__, status);
1429                 port->interrupt_out_urb->transfer_buffer_length = 1;
1430                 port->interrupt_out_urb->dev = port->serial->dev;
1431                 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1432                 if (!result)
1433                         return;
1434                 dev_err(&urb->dev->dev,
1435                         "%s - failed resubmitting write urb, error %d\n",
1436                                                         __func__, result);
1437                 cypress_set_dead(port);
1438                 break;
1439         default:
1440                 dev_err(&urb->dev->dev,
1441                          "%s - unexpected nonzero write status received: %d\n",
1442                                                         __func__, status);
1443                 cypress_set_dead(port);
1444                 break;
1445         }
1446         priv->write_urb_in_use = 0;
1447
1448         /* send any buffered data */
1449         cypress_send(port);
1450 }
1451
1452
1453 /*****************************************************************************
1454  * Write buffer functions - buffering code from pl2303 used
1455  *****************************************************************************/
1456
1457 /*
1458  * cypress_buf_alloc
1459  *
1460  * Allocate a circular buffer and all associated memory.
1461  */
1462
1463 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1464 {
1465
1466         struct cypress_buf *cb;
1467
1468
1469         if (size == 0)
1470                 return NULL;
1471
1472         cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1473         if (cb == NULL)
1474                 return NULL;
1475
1476         cb->buf_buf = kmalloc(size, GFP_KERNEL);
1477         if (cb->buf_buf == NULL) {
1478                 kfree(cb);
1479                 return NULL;
1480         }
1481
1482         cb->buf_size = size;
1483         cb->buf_get = cb->buf_put = cb->buf_buf;
1484
1485         return cb;
1486
1487 }
1488
1489
1490 /*
1491  * cypress_buf_free
1492  *
1493  * Free the buffer and all associated memory.
1494  */
1495
1496 static void cypress_buf_free(struct cypress_buf *cb)
1497 {
1498         if (cb) {
1499                 kfree(cb->buf_buf);
1500                 kfree(cb);
1501         }
1502 }
1503
1504
1505 /*
1506  * cypress_buf_clear
1507  *
1508  * Clear out all data in the circular buffer.
1509  */
1510
1511 static void cypress_buf_clear(struct cypress_buf *cb)
1512 {
1513         if (cb != NULL)
1514                 cb->buf_get = cb->buf_put;
1515                 /* equivalent to a get of all data available */
1516 }
1517
1518
1519 /*
1520  * cypress_buf_data_avail
1521  *
1522  * Return the number of bytes of data available in the circular
1523  * buffer.
1524  */
1525
1526 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1527 {
1528         if (cb != NULL)
1529                 return (cb->buf_size + cb->buf_put - cb->buf_get)
1530                                                         % cb->buf_size;
1531         else
1532                 return 0;
1533 }
1534
1535
1536 /*
1537  * cypress_buf_space_avail
1538  *
1539  * Return the number of bytes of space available in the circular
1540  * buffer.
1541  */
1542
1543 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1544 {
1545         if (cb != NULL)
1546                 return (cb->buf_size + cb->buf_get - cb->buf_put - 1)
1547                                                         % cb->buf_size;
1548         else
1549                 return 0;
1550 }
1551
1552
1553 /*
1554  * cypress_buf_put
1555  *
1556  * Copy data data from a user buffer and put it into the circular buffer.
1557  * Restrict to the amount of space available.
1558  *
1559  * Return the number of bytes copied.
1560  */
1561
1562 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1563         unsigned int count)
1564 {
1565
1566         unsigned int len;
1567
1568
1569         if (cb == NULL)
1570                 return 0;
1571
1572         len  = cypress_buf_space_avail(cb);
1573         if (count > len)
1574                 count = len;
1575
1576         if (count == 0)
1577                 return 0;
1578
1579         len = cb->buf_buf + cb->buf_size - cb->buf_put;
1580         if (count > len) {
1581                 memcpy(cb->buf_put, buf, len);
1582                 memcpy(cb->buf_buf, buf+len, count - len);
1583                 cb->buf_put = cb->buf_buf + count - len;
1584         } else {
1585                 memcpy(cb->buf_put, buf, count);
1586                 if (count < len)
1587                         cb->buf_put += count;
1588                 else /* count == len */
1589                         cb->buf_put = cb->buf_buf;
1590         }
1591
1592         return count;
1593
1594 }
1595
1596
1597 /*
1598  * cypress_buf_get
1599  *
1600  * Get data from the circular buffer and copy to the given buffer.
1601  * Restrict to the amount of data available.
1602  *
1603  * Return the number of bytes copied.
1604  */
1605
1606 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1607         unsigned int count)
1608 {
1609
1610         unsigned int len;
1611
1612
1613         if (cb == NULL)
1614                 return 0;
1615
1616         len = cypress_buf_data_avail(cb);
1617         if (count > len)
1618                 count = len;
1619
1620         if (count == 0)
1621                 return 0;
1622
1623         len = cb->buf_buf + cb->buf_size - cb->buf_get;
1624         if (count > len) {
1625                 memcpy(buf, cb->buf_get, len);
1626                 memcpy(buf+len, cb->buf_buf, count - len);
1627                 cb->buf_get = cb->buf_buf + count - len;
1628         } else {
1629                 memcpy(buf, cb->buf_get, count);
1630                 if (count < len)
1631                         cb->buf_get += count;
1632                 else /* count == len */
1633                         cb->buf_get = cb->buf_buf;
1634         }
1635
1636         return count;
1637
1638 }
1639
1640 /*****************************************************************************
1641  * Module functions
1642  *****************************************************************************/
1643
1644 static int __init cypress_init(void)
1645 {
1646         int retval;
1647
1648         dbg("%s", __func__);
1649
1650         retval = usb_serial_register(&cypress_earthmate_device);
1651         if (retval)
1652                 goto failed_em_register;
1653         retval = usb_serial_register(&cypress_hidcom_device);
1654         if (retval)
1655                 goto failed_hidcom_register;
1656         retval = usb_serial_register(&cypress_ca42v2_device);
1657         if (retval)
1658                 goto failed_ca42v2_register;
1659         retval = usb_register(&cypress_driver);
1660         if (retval)
1661                 goto failed_usb_register;
1662
1663         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
1664                DRIVER_DESC "\n");
1665         return 0;
1666
1667 failed_usb_register:
1668         usb_serial_deregister(&cypress_ca42v2_device);
1669 failed_ca42v2_register:
1670         usb_serial_deregister(&cypress_hidcom_device);
1671 failed_hidcom_register:
1672         usb_serial_deregister(&cypress_earthmate_device);
1673 failed_em_register:
1674         return retval;
1675 }
1676
1677
1678 static void __exit cypress_exit(void)
1679 {
1680         dbg("%s", __func__);
1681
1682         usb_deregister(&cypress_driver);
1683         usb_serial_deregister(&cypress_earthmate_device);
1684         usb_serial_deregister(&cypress_hidcom_device);
1685         usb_serial_deregister(&cypress_ca42v2_device);
1686 }
1687
1688
1689 module_init(cypress_init);
1690 module_exit(cypress_exit);
1691
1692 MODULE_AUTHOR(DRIVER_AUTHOR);
1693 MODULE_DESCRIPTION(DRIVER_DESC);
1694 MODULE_VERSION(DRIVER_VERSION);
1695 MODULE_LICENSE("GPL");
1696
1697 module_param(debug, bool, S_IRUGO | S_IWUSR);
1698 MODULE_PARM_DESC(debug, "Debug enabled or not");
1699 module_param(stats, bool, S_IRUGO | S_IWUSR);
1700 MODULE_PARM_DESC(stats, "Enable statistics or not");
1701 module_param(interval, int, S_IRUGO | S_IWUSR);
1702 MODULE_PARM_DESC(interval, "Overrides interrupt interval");