git.oblomov.eu Git - linux-2.6/blob - drivers/media/dvb/dvb-usb/m920x.c

   1 /* DVB USB compliant linux driver for MSI Mega Sky 580 DVB-T USB2.0 receiver
   2  *
   3  * Copyright (C) 2006 Aapo Tahkola (aet@rasterburn.org)
   4  *
   5  *      This program is free software; you can redistribute it and/or modify it
   6  *      under the terms of the GNU General Public License as published by the
   7  *      Free Software Foundation, version 2.
   8  *
   9  * see Documentation/dvb/README.dvb-usb for more information
  10  */
  11
  12 #include "m920x.h"
  13
  14 #include "mt352.h"
  15 #include "mt352_priv.h"
  16 #include "qt1010.h"
  17 #include "tda1004x.h"
  18 #include "tda827x.h"
  19
  20 /* debug */
  21 static int dvb_usb_m920x_debug;
  22 module_param_named(debug,dvb_usb_m920x_debug, int, 0644);
  23 MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
  24
  25 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  26
  27 static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid);
  28
  29 static inline int m920x_read(struct usb_device *udev, u8 request, u16 value,
  30                              u16 index, void *data, int size)
  31 {
  32         int ret;
  33
  34         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
  35                               request, USB_TYPE_VENDOR | USB_DIR_IN,
  36                               value, index, data, size, 2000);
  37         if (ret < 0) {
  38                 printk(KERN_INFO "m920x_read = error: %d\n", ret);
  39                 return ret;
  40         }
  41
  42         if (ret != size) {
  43                 deb("m920x_read = no data\n");
  44                 return -EIO;
  45         }
  46
  47         return 0;
  48 }
  49
  50 static inline int m920x_write(struct usb_device *udev, u8 request,
  51                               u16 value, u16 index)
  52 {
  53         int ret;
  54
  55         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
  56                               request, USB_TYPE_VENDOR | USB_DIR_OUT,
  57                               value, index, NULL, 0, 2000);
  58
  59         return ret;
  60 }
  61
  62 static int m920x_init(struct dvb_usb_device *d, struct m920x_inits *rc_seq)
  63 {
  64         int ret = 0, i, epi, flags = 0;
  65         int adap_enabled[M9206_MAX_ADAPTERS] = { 0 };
  66
  67         /* Remote controller init. */
  68         if (d->props.rc_query) {
  69                 deb("Initialising remote control\n");
  70                 while (rc_seq->address) {
  71                         if ((ret = m920x_write(d->udev, M9206_CORE,
  72                                                rc_seq->data,
  73                                                rc_seq->address)) != 0) {
  74                                 deb("Initialising remote control failed\n");
  75                                 return ret;
  76                         }
  77
  78                         rc_seq++;
  79                 }
  80
  81                 deb("Initialising remote control success\n");
  82         }
  83
  84         for (i = 0; i < d->props.num_adapters; i++)
  85                 flags |= d->adapter[i].props.caps;
  86
  87         /* Some devices(Dposh) might crash if we attempt touch at all. */
  88         if (flags & DVB_USB_ADAP_HAS_PID_FILTER) {
  89                 for (i = 0; i < d->props.num_adapters; i++) {
  90                         epi = d->adapter[i].props.stream.endpoint - 0x81;
  91
  92                         if (epi < 0 || epi >= M9206_MAX_ADAPTERS) {
  93                                 printk(KERN_INFO "m920x: Unexpected adapter endpoint!\n");
  94                                 return -EINVAL;
  95                         }
  96
  97                         adap_enabled[epi] = 1;
  98                 }
  99
 100                 for (i = 0; i < M9206_MAX_ADAPTERS; i++) {
 101                         if (adap_enabled[i])
 102                                 continue;
 103
 104                         if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x0)) != 0)
 105                                 return ret;
 106
 107                         if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x02f5)) != 0)
 108                                 return ret;
 109                 }
 110         }
 111
 112         return ret;
 113 }
 114
 115 static int m920x_init_ep(struct usb_interface *intf)
 116 {
 117         struct usb_device *udev = interface_to_usbdev(intf);
 118         struct usb_host_interface *alt;
 119
 120         if ((alt = usb_altnum_to_altsetting(intf, 1)) == NULL) {
 121                 deb("No alt found!\n");
 122                 return -ENODEV;
 123         }
 124
 125         return usb_set_interface(udev, alt->desc.bInterfaceNumber,
 126                                  alt->desc.bAlternateSetting);
 127 }
 128
 129 static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 130 {
 131         struct m920x_state *m = d->priv;
 132         int i, ret = 0;
 133         u8 rc_state[2];
 134
 135         if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0)
 136                 goto unlock;
 137
 138         if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
 139                 goto unlock;
 140
 141         for (i = 0; i < d->props.rc_key_map_size; i++)
 142                 if (d->props.rc_key_map[i].data == rc_state[1]) {
 143                         *event = d->props.rc_key_map[i].event;
 144
 145                         switch(rc_state[0]) {
 146                         case 0x80:
 147                                 *state = REMOTE_NO_KEY_PRESSED;
 148                                 goto unlock;
 149
 150                         case 0x88: /* framing error or "invalid code" */
 151                         case 0x99:
 152                         case 0xc0:
 153                         case 0xd8:
 154                                 *state = REMOTE_NO_KEY_PRESSED;
 155                                 m->rep_count = 0;
 156                                 goto unlock;
 157
 158                         case 0x93:
 159                         case 0x92:
 160                                 m->rep_count = 0;
 161                                 *state = REMOTE_KEY_PRESSED;
 162                                 goto unlock;
 163
 164                         case 0x91:
 165                                 /* prevent immediate auto-repeat */
 166                                 if (++m->rep_count > 2)
 167                                         *state = REMOTE_KEY_REPEAT;
 168                                 else
 169                                         *state = REMOTE_NO_KEY_PRESSED;
 170                                 goto unlock;
 171
 172                         default:
 173                                 deb("Unexpected rc state %02x\n", rc_state[0]);
 174                                 *state = REMOTE_NO_KEY_PRESSED;
 175                                 goto unlock;
 176                         }
 177                 }
 178
 179         if (rc_state[1] != 0)
 180                 deb("Unknown rc key %02x\n", rc_state[1]);
 181
 182         *state = REMOTE_NO_KEY_PRESSED;
 183
 184  unlock:
 185
 186         return ret;
 187 }
 188
 189 /* I2C */
 190 static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
 191 {
 192         struct dvb_usb_device *d = i2c_get_adapdata(adap);
 193         int i, j;
 194         int ret = 0;
 195
 196         if (!num)
 197                 return -EINVAL;
 198
 199         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 200                 return -EAGAIN;
 201
 202         for (i = 0; i < num; i++) {
 203                 if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK | I2C_M_TEN) || msg[i].len == 0) {
 204                         /* For a 0 byte message, I think sending the address
 205                          * to index 0x80|0x40 would be the correct thing to
 206                          * do.  However, zero byte messages are only used for
 207                          * probing, and since we don't know how to get the
 208                          * slave's ack, we can't probe. */
 209                         ret = -ENOTSUPP;
 210                         goto unlock;
 211                 }
 212                 /* Send START & address/RW bit */
 213                 if (!(msg[i].flags & I2C_M_NOSTART)) {
 214                         if ((ret = m920x_write(d->udev, M9206_I2C,
 215                                         (msg[i].addr << 1) |
 216                                         (msg[i].flags & I2C_M_RD ? 0x01 : 0), 0x80)) != 0)
 217                                 goto unlock;
 218                         /* Should check for ack here, if we knew how. */
 219                 }
 220                 if (msg[i].flags & I2C_M_RD) {
 221                         for (j = 0; j < msg[i].len; j++) {
 222                                 /* Last byte of transaction?
 223                                  * Send STOP, otherwise send ACK. */
 224                                 int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x01;
 225
 226                                 if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
 227                                                       0x20 | stop,
 228                                                       &msg[i].buf[j], 1)) != 0)
 229                                         goto unlock;
 230                         }
 231                 } else {
 232                         for (j = 0; j < msg[i].len; j++) {
 233                                 /* Last byte of transaction? Then send STOP. */
 234                                 int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x00;
 235
 236                                 if ((ret = m920x_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0)
 237                                         goto unlock;
 238                                 /* Should check for ack here too. */
 239                         }
 240                 }
 241         }
 242         ret = num;
 243
 244  unlock:
 245         mutex_unlock(&d->i2c_mutex);
 246
 247         return ret;
 248 }
 249
 250 static u32 m920x_i2c_func(struct i2c_adapter *adapter)
 251 {
 252         return I2C_FUNC_I2C;
 253 }
 254
 255 static struct i2c_algorithm m920x_i2c_algo = {
 256         .master_xfer   = m920x_i2c_xfer,
 257         .functionality = m920x_i2c_func,
 258 };
 259
 260 /* pid filter */
 261 static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid)
 262 {
 263         int ret = 0;
 264
 265         if (pid >= 0x8000)
 266                 return -EINVAL;
 267
 268         pid |= 0x8000;
 269
 270         if ((ret = m920x_write(d->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0)
 271                 return ret;
 272
 273         if ((ret = m920x_write(d->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0)
 274                 return ret;
 275
 276         return ret;
 277 }
 278
 279 static int m920x_update_filters(struct dvb_usb_adapter *adap)
 280 {
 281         struct m920x_state *m = adap->dev->priv;
 282         int enabled = m->filtering_enabled[adap->id];
 283         int i, ret = 0, filter = 0;
 284         int ep = adap->props.stream.endpoint;
 285
 286         for (i = 0; i < M9206_MAX_FILTERS; i++)
 287                 if (m->filters[adap->id][i] == 8192)
 288                         enabled = 0;
 289
 290         /* Disable all filters */
 291         if ((ret = m920x_set_filter(adap->dev, ep, 1, enabled)) != 0)
 292                 return ret;
 293
 294         for (i = 0; i < M9206_MAX_FILTERS; i++)
 295                 if ((ret = m920x_set_filter(adap->dev, ep, i + 2, 0)) != 0)
 296                         return ret;
 297
 298         /* Set */
 299         if (enabled) {
 300                 for (i = 0; i < M9206_MAX_FILTERS; i++) {
 301                         if (m->filters[adap->id][i] == 0)
 302                                 continue;
 303
 304                         if ((ret = m920x_set_filter(adap->dev, ep, filter + 2, m->filters[adap->id][i])) != 0)
 305                                 return ret;
 306
 307                         filter++;
 308                 }
 309         }
 310
 311         return ret;
 312 }
 313
 314 static int m920x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
 315 {
 316         struct m920x_state *m = adap->dev->priv;
 317
 318         m->filtering_enabled[adap->id] = onoff ? 1 : 0;
 319
 320         return m920x_update_filters(adap);
 321 }
 322
 323 static int m920x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
 324 {
 325         struct m920x_state *m = adap->dev->priv;
 326
 327         m->filters[adap->id][index] = onoff ? pid : 0;
 328
 329         return m920x_update_filters(adap);
 330 }
 331
 332 static int m920x_firmware_download(struct usb_device *udev, const struct firmware *fw)
 333 {
 334         u16 value, index, size;
 335         u8 read[4], *buff;
 336         int i, pass, ret = 0;
 337
 338         buff = kmalloc(65536, GFP_KERNEL);
 339
 340         if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
 341                 goto done;
 342         deb("%x %x %x %x\n", read[0], read[1], read[2], read[3]);
 343
 344         if ((ret = m920x_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0)
 345                 goto done;
 346         deb("%x\n", read[0]);
 347
 348         for (pass = 0; pass < 2; pass++) {
 349                 for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
 350                         value = le16_to_cpu(*(u16 *)(fw->data + i));
 351                         i += sizeof(u16);
 352
 353                         index = le16_to_cpu(*(u16 *)(fw->data + i));
 354                         i += sizeof(u16);
 355
 356                         size = le16_to_cpu(*(u16 *)(fw->data + i));
 357                         i += sizeof(u16);
 358
 359                         if (pass == 1) {
 360                                 /* Will stall if using fw->data ... */
 361                                 memcpy(buff, fw->data + i, size);
 362
 363                                 ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
 364                                                       M9206_FW,
 365                                                       USB_TYPE_VENDOR | USB_DIR_OUT,
 366                                                       value, index, buff, size, 20);
 367                                 if (ret != size) {
 368                                         deb("error while uploading fw!\n");
 369                                         ret = -EIO;
 370                                         goto done;
 371                                 }
 372                                 msleep(3);
 373                         }
 374                         i += size;
 375                 }
 376                 if (i != fw->size) {
 377                         deb("bad firmware file!\n");
 378                         ret = -EINVAL;
 379                         goto done;
 380                 }
 381         }
 382
 383         msleep(36);
 384
 385         /* m920x will disconnect itself from the bus after this. */
 386         (void) m920x_write(udev, M9206_CORE, 0x01, M9206_FW_GO);
 387         deb("firmware uploaded!\n");
 388
 389  done:
 390         kfree(buff);
 391
 392         return ret;
 393 }
 394
 395 /* Callbacks for DVB USB */
 396 static int m920x_identify_state(struct usb_device *udev,
 397                                 struct dvb_usb_device_properties *props,
 398                                 struct dvb_usb_device_description **desc,
 399                                 int *cold)
 400 {
 401         struct usb_host_interface *alt;
 402
 403         alt = usb_altnum_to_altsetting(usb_ifnum_to_if(udev, 0), 1);
 404         *cold = (alt == NULL) ? 1 : 0;
 405
 406         return 0;
 407 }
 408
 409 /* demod configurations */
 410 static int m920x_mt352_demod_init(struct dvb_frontend *fe)
 411 {
 412         int ret;
 413         u8 config[] = { CONFIG, 0x3d };
 414         u8 clock[] = { CLOCK_CTL, 0x30 };
 415         u8 reset[] = { RESET, 0x80 };
 416         u8 adc_ctl[] = { ADC_CTL_1, 0x40 };
 417         u8 agc[] = { AGC_TARGET, 0x1c, 0x20 };
 418         u8 sec_agc[] = { 0x69, 0x00, 0xff, 0xff, 0x40, 0xff, 0x00, 0x40, 0x40 };
 419         u8 unk1[] = { 0x93, 0x1a };
 420         u8 unk2[] = { 0xb5, 0x7a };
 421
 422         deb("Demod init!\n");
 423
 424         if ((ret = mt352_write(fe, config, ARRAY_SIZE(config))) != 0)
 425                 return ret;
 426         if ((ret = mt352_write(fe, clock, ARRAY_SIZE(clock))) != 0)
 427                 return ret;
 428         if ((ret = mt352_write(fe, reset, ARRAY_SIZE(reset))) != 0)
 429                 return ret;
 430         if ((ret = mt352_write(fe, adc_ctl, ARRAY_SIZE(adc_ctl))) != 0)
 431                 return ret;
 432         if ((ret = mt352_write(fe, agc, ARRAY_SIZE(agc))) != 0)
 433                 return ret;
 434         if ((ret = mt352_write(fe, sec_agc, ARRAY_SIZE(sec_agc))) != 0)
 435                 return ret;
 436         if ((ret = mt352_write(fe, unk1, ARRAY_SIZE(unk1))) != 0)
 437                 return ret;
 438         if ((ret = mt352_write(fe, unk2, ARRAY_SIZE(unk2))) != 0)
 439                 return ret;
 440
 441         return 0;
 442 }
 443
 444 static struct mt352_config m920x_mt352_config = {
 445         .demod_address = 0x0f,
 446         .no_tuner = 1,
 447         .demod_init = m920x_mt352_demod_init,
 448 };
 449
 450 static struct tda1004x_config m920x_tda10046_08_config = {
 451         .demod_address = 0x08,
 452         .invert = 0,
 453         .invert_oclk = 0,
 454         .ts_mode = TDA10046_TS_SERIAL,
 455         .xtal_freq = TDA10046_XTAL_16M,
 456         .if_freq = TDA10046_FREQ_045,
 457         .agc_config = TDA10046_AGC_TDA827X,
 458         .gpio_config = TDA10046_GPTRI,
 459         .request_firmware = NULL,
 460 };
 461
 462 static struct tda1004x_config m920x_tda10046_0b_config = {
 463         .demod_address = 0x0b,
 464         .invert = 0,
 465         .invert_oclk = 0,
 466         .ts_mode = TDA10046_TS_SERIAL,
 467         .xtal_freq = TDA10046_XTAL_16M,
 468         .if_freq = TDA10046_FREQ_045,
 469         .agc_config = TDA10046_AGC_TDA827X,
 470         .gpio_config = TDA10046_GPTRI,
 471         .request_firmware = NULL, /* uses firmware EEPROM */
 472 };
 473
 474 /* tuner configurations */
 475 static struct qt1010_config m920x_qt1010_config = {
 476         .i2c_address = 0x62
 477 };
 478
 479 /* Callbacks for DVB USB */
 480 static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap)
 481 {
 482         deb("%s\n",__func__);
 483
 484         if ((adap->fe = dvb_attach(mt352_attach,
 485                                    &m920x_mt352_config,
 486                                    &adap->dev->i2c_adap)) == NULL)
 487                 return -EIO;
 488
 489         return 0;
 490 }
 491
 492 static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap)
 493 {
 494         deb("%s\n",__func__);
 495
 496         if ((adap->fe = dvb_attach(tda10046_attach,
 497                                    &m920x_tda10046_08_config,
 498                                    &adap->dev->i2c_adap)) == NULL)
 499                 return -EIO;
 500
 501         return 0;
 502 }
 503
 504 static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap)
 505 {
 506         deb("%s\n",__func__);
 507
 508         if ((adap->fe = dvb_attach(tda10046_attach,
 509                                    &m920x_tda10046_0b_config,
 510                                    &adap->dev->i2c_adap)) == NULL)
 511                 return -EIO;
 512
 513         return 0;
 514 }
 515
 516 static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
 517 {
 518         deb("%s\n",__func__);
 519
 520         if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL)
 521                 return -ENODEV;
 522
 523         return 0;
 524 }
 525
 526 static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap)
 527 {
 528         deb("%s\n",__func__);
 529
 530         if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL)
 531                 return -ENODEV;
 532
 533         return 0;
 534 }
 535
 536 static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap)
 537 {
 538         deb("%s\n",__func__);
 539
 540         if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL)
 541                 return -ENODEV;
 542
 543         return 0;
 544 }
 545
 546 /* device-specific initialization */
 547 static struct m920x_inits megasky_rc_init [] = {
 548         { M9206_RC_INIT2, 0xa8 },
 549         { M9206_RC_INIT1, 0x51 },
 550         { } /* terminating entry */
 551 };
 552
 553 static struct m920x_inits tvwalkertwin_rc_init [] = {
 554         { M9206_RC_INIT2, 0x00 },
 555         { M9206_RC_INIT1, 0xef },
 556         { 0xff28,         0x00 },
 557         { 0xff23,         0x00 },
 558         { 0xff21,         0x30 },
 559         { } /* terminating entry */
 560 };
 561
 562 /* ir keymaps */
 563 static struct dvb_usb_rc_key megasky_rc_keys [] = {
 564         { 0x0, 0x12, KEY_POWER },
 565         { 0x0, 0x1e, KEY_CYCLEWINDOWS }, /* min/max */
 566         { 0x0, 0x02, KEY_CHANNELUP },
 567         { 0x0, 0x05, KEY_CHANNELDOWN },
 568         { 0x0, 0x03, KEY_VOLUMEUP },
 569         { 0x0, 0x06, KEY_VOLUMEDOWN },
 570         { 0x0, 0x04, KEY_MUTE },
 571         { 0x0, 0x07, KEY_OK }, /* TS */
 572         { 0x0, 0x08, KEY_STOP },
 573         { 0x0, 0x09, KEY_MENU }, /* swap */
 574         { 0x0, 0x0a, KEY_REWIND },
 575         { 0x0, 0x1b, KEY_PAUSE },
 576         { 0x0, 0x1f, KEY_FASTFORWARD },
 577         { 0x0, 0x0c, KEY_RECORD },
 578         { 0x0, 0x0d, KEY_CAMERA }, /* screenshot */
 579         { 0x0, 0x0e, KEY_COFFEE }, /* "MTS" */
 580 };
 581
 582 static struct dvb_usb_rc_key tvwalkertwin_rc_keys [] = {
 583         { 0x0, 0x01, KEY_ZOOM }, /* Full Screen */
 584         { 0x0, 0x02, KEY_CAMERA }, /* snapshot */
 585         { 0x0, 0x03, KEY_MUTE },
 586         { 0x0, 0x04, KEY_REWIND },
 587         { 0x0, 0x05, KEY_PLAYPAUSE }, /* Play/Pause */
 588         { 0x0, 0x06, KEY_FASTFORWARD },
 589         { 0x0, 0x07, KEY_RECORD },
 590         { 0x0, 0x08, KEY_STOP },
 591         { 0x0, 0x09, KEY_TIME }, /* Timeshift */
 592         { 0x0, 0x0c, KEY_COFFEE }, /* Recall */
 593         { 0x0, 0x0e, KEY_CHANNELUP },
 594         { 0x0, 0x12, KEY_POWER },
 595         { 0x0, 0x15, KEY_MENU }, /* source */
 596         { 0x0, 0x18, KEY_CYCLEWINDOWS }, /* TWIN PIP */
 597         { 0x0, 0x1a, KEY_CHANNELDOWN },
 598         { 0x0, 0x1b, KEY_VOLUMEDOWN },
 599         { 0x0, 0x1e, KEY_VOLUMEUP },
 600 };
 601
 602 /* DVB USB Driver stuff */
 603 static struct dvb_usb_device_properties megasky_properties;
 604 static struct dvb_usb_device_properties digivox_mini_ii_properties;
 605 static struct dvb_usb_device_properties tvwalkertwin_properties;
 606 static struct dvb_usb_device_properties dposh_properties;
 607
 608 static int m920x_probe(struct usb_interface *intf,
 609                        const struct usb_device_id *id)
 610 {
 611         struct dvb_usb_device *d = NULL;
 612         int ret;
 613         struct m920x_inits *rc_init_seq = NULL;
 614         int bInterfaceNumber = intf->cur_altsetting->desc.bInterfaceNumber;
 615
 616         deb("Probing for m920x device at interface %d\n", bInterfaceNumber);
 617
 618         if (bInterfaceNumber == 0) {
 619                 /* Single-tuner device, or first interface on
 620                  * multi-tuner device
 621                  */
 622
 623                 ret = dvb_usb_device_init(intf, &megasky_properties,
 624                                           THIS_MODULE, &d, adapter_nr);
 625                 if (ret == 0) {
 626                         rc_init_seq = megasky_rc_init;
 627                         goto found;
 628                 }
 629
 630                 ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties,
 631                                           THIS_MODULE, &d, adapter_nr);
 632                 if (ret == 0) {
 633                         /* No remote control, so no rc_init_seq */
 634                         goto found;
 635                 }
 636
 637                 /* This configures both tuners on the TV Walker Twin */
 638                 ret = dvb_usb_device_init(intf, &tvwalkertwin_properties,
 639                                           THIS_MODULE, &d, adapter_nr);
 640                 if (ret == 0) {
 641                         rc_init_seq = tvwalkertwin_rc_init;
 642                         goto found;
 643                 }
 644
 645                 ret = dvb_usb_device_init(intf, &dposh_properties,
 646                                           THIS_MODULE, &d, adapter_nr);
 647                 if (ret == 0) {
 648                         /* Remote controller not supported yet. */
 649                         goto found;
 650                 }
 651
 652                 return ret;
 653         } else {
 654                 /* Another interface on a multi-tuner device */
 655
 656                 /* The LifeView TV Walker Twin gets here, but struct
 657                  * tvwalkertwin_properties already configured both
 658                  * tuners, so there is nothing for us to do here
 659                  */
 660         }
 661
 662  found:
 663         if ((ret = m920x_init_ep(intf)) < 0)
 664                 return ret;
 665
 666         if (d && (ret = m920x_init(d, rc_init_seq)) != 0)
 667                 return ret;
 668
 669         return ret;
 670 }
 671
 672 static struct usb_device_id m920x_table [] = {
 673                 { USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) },
 674                 { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
 675                              USB_PID_MSI_DIGI_VOX_MINI_II) },
 676                 { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
 677                              USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD) },
 678                 { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
 679                              USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) },
 680                 { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) },
 681                 { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) },
 682                 { }             /* Terminating entry */
 683 };
 684 MODULE_DEVICE_TABLE (usb, m920x_table);
 685
 686 static struct dvb_usb_device_properties megasky_properties = {
 687         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 688
 689         .usb_ctrl = DEVICE_SPECIFIC,
 690         .firmware = "dvb-usb-megasky-02.fw",
 691         .download_firmware = m920x_firmware_download,
 692
 693         .rc_interval      = 100,
 694         .rc_key_map       = megasky_rc_keys,
 695         .rc_key_map_size  = ARRAY_SIZE(megasky_rc_keys),
 696         .rc_query         = m920x_rc_query,
 697
 698         .size_of_priv     = sizeof(struct m920x_state),
 699
 700         .identify_state   = m920x_identify_state,
 701         .num_adapters = 1,
 702         .adapter = {{
 703                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
 704                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 705
 706                 .pid_filter_count = 8,
 707                 .pid_filter       = m920x_pid_filter,
 708                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
 709
 710                 .frontend_attach  = m920x_mt352_frontend_attach,
 711                 .tuner_attach     = m920x_qt1010_tuner_attach,
 712
 713                 .stream = {
 714                         .type = USB_BULK,
 715                         .count = 8,
 716                         .endpoint = 0x81,
 717                         .u = {
 718                                 .bulk = {
 719                                         .buffersize = 512,
 720                                 }
 721                         }
 722                 },
 723         }},
 724         .i2c_algo         = &m920x_i2c_algo,
 725
 726         .num_device_descs = 1,
 727         .devices = {
 728                 {   "MSI Mega Sky 580 DVB-T USB2.0",
 729                         { &m920x_table[0], NULL },
 730                         { NULL },
 731                 }
 732         }
 733 };
 734
 735 static struct dvb_usb_device_properties digivox_mini_ii_properties = {
 736         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 737
 738         .usb_ctrl = DEVICE_SPECIFIC,
 739         .firmware = "dvb-usb-digivox-02.fw",
 740         .download_firmware = m920x_firmware_download,
 741
 742         .size_of_priv     = sizeof(struct m920x_state),
 743
 744         .identify_state   = m920x_identify_state,
 745         .num_adapters = 1,
 746         .adapter = {{
 747                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
 748                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 749
 750                 .pid_filter_count = 8,
 751                 .pid_filter       = m920x_pid_filter,
 752                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
 753
 754                 .frontend_attach  = m920x_tda10046_08_frontend_attach,
 755                 .tuner_attach     = m920x_tda8275_60_tuner_attach,
 756
 757                 .stream = {
 758                         .type = USB_BULK,
 759                         .count = 8,
 760                         .endpoint = 0x81,
 761                         .u = {
 762                                 .bulk = {
 763                                         .buffersize = 0x4000,
 764                                 }
 765                         }
 766                 },
 767         }},
 768         .i2c_algo         = &m920x_i2c_algo,
 769
 770         .num_device_descs = 1,
 771         .devices = {
 772                 {   "MSI DIGI VOX mini II DVB-T USB2.0",
 773                         { &m920x_table[1], NULL },
 774                         { NULL },
 775                 },
 776         }
 777 };
 778
 779 /* LifeView TV Walker Twin support by Nick Andrew <nick@nick-andrew.net>
 780  *
 781  * LifeView TV Walker Twin has 1 x M9206, 2 x TDA10046, 2 x TDA8275A
 782  * TDA10046 #0 is located at i2c address 0x08
 783  * TDA10046 #1 is located at i2c address 0x0b
 784  * TDA8275A #0 is located at i2c address 0x60
 785  * TDA8275A #1 is located at i2c address 0x61
 786  */
 787 static struct dvb_usb_device_properties tvwalkertwin_properties = {
 788         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 789
 790         .usb_ctrl = DEVICE_SPECIFIC,
 791         .firmware = "dvb-usb-tvwalkert.fw",
 792         .download_firmware = m920x_firmware_download,
 793
 794         .rc_interval      = 100,
 795         .rc_key_map       = tvwalkertwin_rc_keys,
 796         .rc_key_map_size  = ARRAY_SIZE(tvwalkertwin_rc_keys),
 797         .rc_query         = m920x_rc_query,
 798
 799         .size_of_priv     = sizeof(struct m920x_state),
 800
 801         .identify_state   = m920x_identify_state,
 802         .num_adapters = 2,
 803         .adapter = {{
 804                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
 805                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 806
 807                 .pid_filter_count = 8,
 808                 .pid_filter       = m920x_pid_filter,
 809                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
 810
 811                 .frontend_attach  = m920x_tda10046_08_frontend_attach,
 812                 .tuner_attach     = m920x_tda8275_60_tuner_attach,
 813
 814                 .stream = {
 815                         .type = USB_BULK,
 816                         .count = 8,
 817                         .endpoint = 0x81,
 818                         .u = {
 819                                  .bulk = {
 820                                          .buffersize = 512,
 821                                  }
 822                         }
 823                 }},{
 824                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
 825                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 826
 827                 .pid_filter_count = 8,
 828                 .pid_filter       = m920x_pid_filter,
 829                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
 830
 831                 .frontend_attach  = m920x_tda10046_0b_frontend_attach,
 832                 .tuner_attach     = m920x_tda8275_61_tuner_attach,
 833
 834                 .stream = {
 835                         .type = USB_BULK,
 836                         .count = 8,
 837                         .endpoint = 0x82,
 838                         .u = {
 839                                  .bulk = {
 840                                          .buffersize = 512,
 841                                  }
 842                         }
 843                 },
 844         }},
 845         .i2c_algo         = &m920x_i2c_algo,
 846
 847         .num_device_descs = 1,
 848         .devices = {
 849                 {   .name = "LifeView TV Walker Twin DVB-T USB2.0",
 850                     .cold_ids = { &m920x_table[2], NULL },
 851                     .warm_ids = { &m920x_table[3], NULL },
 852                 },
 853         }
 854 };
 855
 856 static struct dvb_usb_device_properties dposh_properties = {
 857         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 858
 859         .usb_ctrl = DEVICE_SPECIFIC,
 860         .firmware = "dvb-usb-dposh-01.fw",
 861         .download_firmware = m920x_firmware_download,
 862
 863         .size_of_priv     = sizeof(struct m920x_state),
 864
 865         .identify_state   = m920x_identify_state,
 866         .num_adapters = 1,
 867         .adapter = {{
 868                 /* Hardware pid filters don't work with this device/firmware */
 869
 870                 .frontend_attach  = m920x_mt352_frontend_attach,
 871                 .tuner_attach     = m920x_qt1010_tuner_attach,
 872
 873                 .stream = {
 874                         .type = USB_BULK,
 875                         .count = 8,
 876                         .endpoint = 0x81,
 877                         .u = {
 878                                  .bulk = {
 879                                          .buffersize = 512,
 880                                  }
 881                         }
 882                 },
 883         }},
 884         .i2c_algo         = &m920x_i2c_algo,
 885
 886         .num_device_descs = 1,
 887         .devices = {
 888                  {   .name = "Dposh DVB-T USB2.0",
 889                      .cold_ids = { &m920x_table[4], NULL },
 890                      .warm_ids = { &m920x_table[5], NULL },
 891                  },
 892          }
 893 };
 894
 895 static struct usb_driver m920x_driver = {
 896         .name           = "dvb_usb_m920x",
 897         .probe          = m920x_probe,
 898         .disconnect     = dvb_usb_device_exit,
 899         .id_table       = m920x_table,
 900 };
 901
 902 /* module stuff */
 903 static int __init m920x_module_init(void)
 904 {
 905         int ret;
 906
 907         if ((ret = usb_register(&m920x_driver))) {
 908                 err("usb_register failed. Error number %d", ret);
 909                 return ret;
 910         }
 911
 912         return 0;
 913 }
 914
 915 static void __exit m920x_module_exit(void)
 916 {
 917         /* deregister this driver from the USB subsystem */
 918         usb_deregister(&m920x_driver);
 919 }
 920
 921 module_init (m920x_module_init);
 922 module_exit (m920x_module_exit);
 923
 924 MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>");
 925 MODULE_DESCRIPTION("DVB Driver for ULI M920x");
 926 MODULE_VERSION("0.1");
 927 MODULE_LICENSE("GPL");
 928
 929 /*
 930  * Local variables:
 931  * c-basic-offset: 8
 932  */