Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
[linux-2.6] / arch / arm / mach-orion5x / rd88f5182-setup.c
1 /*
2  * arch/arm/mach-orion5x/rd88f5182-setup.c
3  *
4  * Marvell Orion-NAS Reference Design Setup
5  *
6  * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
7  *
8  * This file is licensed under the terms of the GNU General Public
9  * License version 2.  This program is licensed "as is" without any
10  * warranty of any kind, whether express or implied.
11  */
12
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/pci.h>
17 #include <linux/irq.h>
18 #include <linux/mtd/physmap.h>
19 #include <linux/mv643xx_eth.h>
20 #include <linux/ata_platform.h>
21 #include <linux/i2c.h>
22 #include <asm/mach-types.h>
23 #include <asm/gpio.h>
24 #include <asm/leds.h>
25 #include <asm/mach/arch.h>
26 #include <asm/mach/pci.h>
27 #include <mach/orion5x.h>
28 #include "common.h"
29 #include "mpp.h"
30
31 /*****************************************************************************
32  * RD-88F5182 Info
33  ****************************************************************************/
34
35 /*
36  * 512K NOR flash Device bus boot chip select
37  */
38
39 #define RD88F5182_NOR_BOOT_BASE         0xf4000000
40 #define RD88F5182_NOR_BOOT_SIZE         SZ_512K
41
42 /*
43  * 16M NOR flash on Device bus chip select 1
44  */
45
46 #define RD88F5182_NOR_BASE              0xfc000000
47 #define RD88F5182_NOR_SIZE              SZ_16M
48
49 /*
50  * PCI
51  */
52
53 #define RD88F5182_PCI_SLOT0_OFFS        7
54 #define RD88F5182_PCI_SLOT0_IRQ_A_PIN   7
55 #define RD88F5182_PCI_SLOT0_IRQ_B_PIN   6
56
57 /*
58  * GPIO Debug LED
59  */
60
61 #define RD88F5182_GPIO_DBG_LED          0
62
63 /*****************************************************************************
64  * 16M NOR Flash on Device bus CS1
65  ****************************************************************************/
66
67 static struct physmap_flash_data rd88f5182_nor_flash_data = {
68         .width          = 1,
69 };
70
71 static struct resource rd88f5182_nor_flash_resource = {
72         .flags                  = IORESOURCE_MEM,
73         .start                  = RD88F5182_NOR_BASE,
74         .end                    = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
75 };
76
77 static struct platform_device rd88f5182_nor_flash = {
78         .name                   = "physmap-flash",
79         .id                     = 0,
80         .dev            = {
81                 .platform_data  = &rd88f5182_nor_flash_data,
82         },
83         .num_resources          = 1,
84         .resource               = &rd88f5182_nor_flash_resource,
85 };
86
87 #ifdef CONFIG_LEDS
88
89 /*****************************************************************************
90  * Use GPIO debug led as CPU active indication
91  ****************************************************************************/
92
93 static void rd88f5182_dbgled_event(led_event_t evt)
94 {
95         int val;
96
97         if (evt == led_idle_end)
98                 val = 1;
99         else if (evt == led_idle_start)
100                 val = 0;
101         else
102                 return;
103
104         gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
105 }
106
107 static int __init rd88f5182_dbgled_init(void)
108 {
109         int pin;
110
111         if (machine_is_rd88f5182()) {
112                 pin = RD88F5182_GPIO_DBG_LED;
113
114                 if (gpio_request(pin, "DBGLED") == 0) {
115                         if (gpio_direction_output(pin, 0) != 0) {
116                                 printk(KERN_ERR "rd88f5182_dbgled_init failed "
117                                                 "to set output pin %d\n", pin);
118                                 gpio_free(pin);
119                                 return 0;
120                         }
121                 } else {
122                         printk(KERN_ERR "rd88f5182_dbgled_init failed "
123                                         "to request gpio %d\n", pin);
124                         return 0;
125                 }
126
127                 leds_event = rd88f5182_dbgled_event;
128         }
129
130         return 0;
131 }
132
133 __initcall(rd88f5182_dbgled_init);
134
135 #endif
136
137 /*****************************************************************************
138  * PCI
139  ****************************************************************************/
140
141 void __init rd88f5182_pci_preinit(void)
142 {
143         int pin;
144
145         /*
146          * Configure PCI GPIO IRQ pins
147          */
148         pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
149         if (gpio_request(pin, "PCI IntA") == 0) {
150                 if (gpio_direction_input(pin) == 0) {
151                         set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
152                 } else {
153                         printk(KERN_ERR "rd88f5182_pci_preinit faield to "
154                                         "set_irq_type pin %d\n", pin);
155                         gpio_free(pin);
156                 }
157         } else {
158                 printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
159         }
160
161         pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
162         if (gpio_request(pin, "PCI IntB") == 0) {
163                 if (gpio_direction_input(pin) == 0) {
164                         set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
165                 } else {
166                         printk(KERN_ERR "rd88f5182_pci_preinit faield to "
167                                         "set_irq_type pin %d\n", pin);
168                         gpio_free(pin);
169                 }
170         } else {
171                 printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
172         }
173 }
174
175 static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
176 {
177         int irq;
178
179         /*
180          * Check for devices with hard-wired IRQs.
181          */
182         irq = orion5x_pci_map_irq(dev, slot, pin);
183         if (irq != -1)
184                 return irq;
185
186         /*
187          * PCI IRQs are connected via GPIOs
188          */
189         switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
190         case 0:
191                 if (pin == 1)
192                         return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
193                 else
194                         return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
195         default:
196                 return -1;
197         }
198 }
199
200 static struct hw_pci rd88f5182_pci __initdata = {
201         .nr_controllers = 2,
202         .preinit        = rd88f5182_pci_preinit,
203         .swizzle        = pci_std_swizzle,
204         .setup          = orion5x_pci_sys_setup,
205         .scan           = orion5x_pci_sys_scan_bus,
206         .map_irq        = rd88f5182_pci_map_irq,
207 };
208
209 static int __init rd88f5182_pci_init(void)
210 {
211         if (machine_is_rd88f5182())
212                 pci_common_init(&rd88f5182_pci);
213
214         return 0;
215 }
216
217 subsys_initcall(rd88f5182_pci_init);
218
219 /*****************************************************************************
220  * Ethernet
221  ****************************************************************************/
222
223 static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
224         .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
225 };
226
227 /*****************************************************************************
228  * RTC DS1338 on I2C bus
229  ****************************************************************************/
230 static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
231         I2C_BOARD_INFO("ds1338", 0x68),
232 };
233
234 /*****************************************************************************
235  * Sata
236  ****************************************************************************/
237 static struct mv_sata_platform_data rd88f5182_sata_data = {
238         .n_ports        = 2,
239 };
240
241 /*****************************************************************************
242  * General Setup
243  ****************************************************************************/
244 static struct orion5x_mpp_mode rd88f5182_mpp_modes[] __initdata = {
245         {  0, MPP_GPIO },               /* Debug Led */
246         {  1, MPP_GPIO },               /* Reset Switch */
247         {  2, MPP_UNUSED },
248         {  3, MPP_GPIO },               /* RTC Int */
249         {  4, MPP_GPIO },
250         {  5, MPP_GPIO },
251         {  6, MPP_GPIO },               /* PCI_intA */
252         {  7, MPP_GPIO },               /* PCI_intB */
253         {  8, MPP_UNUSED },
254         {  9, MPP_UNUSED },
255         { 10, MPP_UNUSED },
256         { 11, MPP_UNUSED },
257         { 12, MPP_SATA_LED },           /* SATA 0 presence */
258         { 13, MPP_SATA_LED },           /* SATA 1 presence */
259         { 14, MPP_SATA_LED },           /* SATA 0 active */
260         { 15, MPP_SATA_LED },           /* SATA 1 active */
261         { 16, MPP_UNUSED },
262         { 17, MPP_UNUSED },
263         { 18, MPP_UNUSED },
264         { 19, MPP_UNUSED },
265         { -1 },
266 };
267
268 static void __init rd88f5182_init(void)
269 {
270         /*
271          * Setup basic Orion functions. Need to be called early.
272          */
273         orion5x_init();
274
275         orion5x_mpp_conf(rd88f5182_mpp_modes);
276
277         /*
278          * MPP[20] PCI Clock to MV88F5182
279          * MPP[21] PCI Clock to mini PCI CON11
280          * MPP[22] USB 0 over current indication
281          * MPP[23] USB 1 over current indication
282          * MPP[24] USB 1 over current enable
283          * MPP[25] USB 0 over current enable
284          */
285
286         /*
287          * Configure peripherals.
288          */
289         orion5x_ehci0_init();
290         orion5x_ehci1_init();
291         orion5x_eth_init(&rd88f5182_eth_data);
292         orion5x_i2c_init();
293         orion5x_sata_init(&rd88f5182_sata_data);
294         orion5x_uart0_init();
295         orion5x_xor_init();
296
297         orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
298                                    RD88F5182_NOR_BOOT_SIZE);
299
300         orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
301         platform_device_register(&rd88f5182_nor_flash);
302
303         i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
304 }
305
306 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
307         /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
308         .phys_io        = ORION5X_REGS_PHYS_BASE,
309         .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
310         .boot_params    = 0x00000100,
311         .init_machine   = rd88f5182_init,
312         .map_io         = orion5x_map_io,
313         .init_irq       = orion5x_init_irq,
314         .timer          = &orion5x_timer,
315 MACHINE_END