git.oblomov.eu Git - linux-2.6/blob - drivers/char/synclink_gt.c

   1 /*
   2  * Device driver for Microgate SyncLink GT serial adapters.
   3  *
   4  * written by Paul Fulghum for Microgate Corporation
   5  * paulkf@microgate.com
   6  *
   7  * Microgate and SyncLink are trademarks of Microgate Corporation
   8  *
   9  * This code is released under the GNU General Public License (GPL)
  10  *
  11  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  12  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  13  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  14  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
  15  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  16  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  17  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  18  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  19  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  20  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  21  * OF THE POSSIBILITY OF SUCH DAMAGE.
  22  */
  23
  24 /*
  25  * DEBUG OUTPUT DEFINITIONS
  26  *
  27  * uncomment lines below to enable specific types of debug output
  28  *
  29  * DBGINFO   information - most verbose output
  30  * DBGERR    serious errors
  31  * DBGBH     bottom half service routine debugging
  32  * DBGISR    interrupt service routine debugging
  33  * DBGDATA   output receive and transmit data
  34  * DBGTBUF   output transmit DMA buffers and registers
  35  * DBGRBUF   output receive DMA buffers and registers
  36  */
  37
  38 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
  39 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
  40 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
  41 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
  42 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
  43 //#define DBGTBUF(info) dump_tbufs(info)
  44 //#define DBGRBUF(info) dump_rbufs(info)
  45
  46
  47 #include <linux/module.h>
  48 #include <linux/errno.h>
  49 #include <linux/signal.h>
  50 #include <linux/sched.h>
  51 #include <linux/timer.h>
  52 #include <linux/interrupt.h>
  53 #include <linux/pci.h>
  54 #include <linux/tty.h>
  55 #include <linux/tty_flip.h>
  56 #include <linux/serial.h>
  57 #include <linux/major.h>
  58 #include <linux/string.h>
  59 #include <linux/fcntl.h>
  60 #include <linux/ptrace.h>
  61 #include <linux/ioport.h>
  62 #include <linux/mm.h>
  63 #include <linux/slab.h>
  64 #include <linux/netdevice.h>
  65 #include <linux/vmalloc.h>
  66 #include <linux/init.h>
  67 #include <linux/delay.h>
  68 #include <linux/ioctl.h>
  69 #include <linux/termios.h>
  70 #include <linux/bitops.h>
  71 #include <linux/workqueue.h>
  72 #include <linux/hdlc.h>
  73 #include <linux/synclink.h>
  74
  75 #include <asm/system.h>
  76 #include <asm/io.h>
  77 #include <asm/irq.h>
  78 #include <asm/dma.h>
  79 #include <asm/types.h>
  80 #include <asm/uaccess.h>
  81
  82 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
  83 #define SYNCLINK_GENERIC_HDLC 1
  84 #else
  85 #define SYNCLINK_GENERIC_HDLC 0
  86 #endif
  87
  88 /*
  89  * module identification
  90  */
  91 static char *driver_name     = "SyncLink GT";
  92 static char *tty_driver_name = "synclink_gt";
  93 static char *tty_dev_prefix  = "ttySLG";
  94 MODULE_LICENSE("GPL");
  95 #define MGSL_MAGIC 0x5401
  96 #define MAX_DEVICES 32
  97
  98 static struct pci_device_id pci_table[] = {
  99         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 100         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 101         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 102         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 103         {0,}, /* terminate list */
 104 };
 105 MODULE_DEVICE_TABLE(pci, pci_table);
 106
 107 static int  init_one(struct pci_dev *dev,const struct pci_device_id *ent);
 108 static void remove_one(struct pci_dev *dev);
 109 static struct pci_driver pci_driver = {
 110         .name           = "synclink_gt",
 111         .id_table       = pci_table,
 112         .probe          = init_one,
 113         .remove         = __devexit_p(remove_one),
 114 };
 115
 116 static bool pci_registered;
 117
 118 /*
 119  * module configuration and status
 120  */
 121 static struct slgt_info *slgt_device_list;
 122 static int slgt_device_count;
 123
 124 static int ttymajor;
 125 static int debug_level;
 126 static int maxframe[MAX_DEVICES];
 127
 128 module_param(ttymajor, int, 0);
 129 module_param(debug_level, int, 0);
 130 module_param_array(maxframe, int, NULL, 0);
 131
 132 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
 133 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
 134 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
 135
 136 /*
 137  * tty support and callbacks
 138  */
 139 static struct tty_driver *serial_driver;
 140
 141 static int  open(struct tty_struct *tty, struct file * filp);
 142 static void close(struct tty_struct *tty, struct file * filp);
 143 static void hangup(struct tty_struct *tty);
 144 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
 145
 146 static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
 147 static int put_char(struct tty_struct *tty, unsigned char ch);
 148 static void send_xchar(struct tty_struct *tty, char ch);
 149 static void wait_until_sent(struct tty_struct *tty, int timeout);
 150 static int  write_room(struct tty_struct *tty);
 151 static void flush_chars(struct tty_struct *tty);
 152 static void flush_buffer(struct tty_struct *tty);
 153 static void tx_hold(struct tty_struct *tty);
 154 static void tx_release(struct tty_struct *tty);
 155
 156 static int  ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
 157 static int  read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
 158 static int  chars_in_buffer(struct tty_struct *tty);
 159 static void throttle(struct tty_struct * tty);
 160 static void unthrottle(struct tty_struct * tty);
 161 static int set_break(struct tty_struct *tty, int break_state);
 162
 163 /*
 164  * generic HDLC support and callbacks
 165  */
 166 #if SYNCLINK_GENERIC_HDLC
 167 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
 168 static void hdlcdev_tx_done(struct slgt_info *info);
 169 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
 170 static int  hdlcdev_init(struct slgt_info *info);
 171 static void hdlcdev_exit(struct slgt_info *info);
 172 #endif
 173
 174
 175 /*
 176  * device specific structures, macros and functions
 177  */
 178
 179 #define SLGT_MAX_PORTS 4
 180 #define SLGT_REG_SIZE  256
 181
 182 /*
 183  * conditional wait facility
 184  */
 185 struct cond_wait {
 186         struct cond_wait *next;
 187         wait_queue_head_t q;
 188         wait_queue_t wait;
 189         unsigned int data;
 190 };
 191 static void init_cond_wait(struct cond_wait *w, unsigned int data);
 192 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
 193 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
 194 static void flush_cond_wait(struct cond_wait **head);
 195
 196 /*
 197  * DMA buffer descriptor and access macros
 198  */
 199 struct slgt_desc
 200 {
 201         __le16 count;
 202         __le16 status;
 203         __le32 pbuf;  /* physical address of data buffer */
 204         __le32 next;  /* physical address of next descriptor */
 205
 206         /* driver book keeping */
 207         char *buf;          /* virtual  address of data buffer */
 208         unsigned int pdesc; /* physical address of this descriptor */
 209         dma_addr_t buf_dma_addr;
 210         unsigned short buf_count;
 211 };
 212
 213 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
 214 #define set_desc_next(a,b) (a).next   = cpu_to_le32((unsigned int)(b))
 215 #define set_desc_count(a,b)(a).count  = cpu_to_le16((unsigned short)(b))
 216 #define set_desc_eof(a,b)  (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
 217 #define desc_count(a)      (le16_to_cpu((a).count))
 218 #define desc_status(a)     (le16_to_cpu((a).status))
 219 #define desc_complete(a)   (le16_to_cpu((a).status) & BIT15)
 220 #define desc_eof(a)        (le16_to_cpu((a).status) & BIT2)
 221 #define desc_crc_error(a)  (le16_to_cpu((a).status) & BIT1)
 222 #define desc_abort(a)      (le16_to_cpu((a).status) & BIT0)
 223 #define desc_residue(a)    ((le16_to_cpu((a).status) & 0x38) >> 3)
 224
 225 struct _input_signal_events {
 226         int ri_up;
 227         int ri_down;
 228         int dsr_up;
 229         int dsr_down;
 230         int dcd_up;
 231         int dcd_down;
 232         int cts_up;
 233         int cts_down;
 234 };
 235
 236 /*
 237  * device instance data structure
 238  */
 239 struct slgt_info {
 240         void *if_ptr;           /* General purpose pointer (used by SPPP) */
 241         struct tty_port port;
 242
 243         struct slgt_info *next_device;  /* device list link */
 244
 245         int magic;
 246
 247         char device_name[25];
 248         struct pci_dev *pdev;
 249
 250         int port_count;  /* count of ports on adapter */
 251         int adapter_num; /* adapter instance number */
 252         int port_num;    /* port instance number */
 253
 254         /* array of pointers to port contexts on this adapter */
 255         struct slgt_info *port_array[SLGT_MAX_PORTS];
 256
 257         int                     line;           /* tty line instance number */
 258
 259         struct mgsl_icount      icount;
 260
 261         int                     timeout;
 262         int                     x_char;         /* xon/xoff character */
 263         unsigned int            read_status_mask;
 264         unsigned int            ignore_status_mask;
 265
 266         wait_queue_head_t       status_event_wait_q;
 267         wait_queue_head_t       event_wait_q;
 268         struct timer_list       tx_timer;
 269         struct timer_list       rx_timer;
 270
 271         unsigned int            gpio_present;
 272         struct cond_wait        *gpio_wait_q;
 273
 274         spinlock_t lock;        /* spinlock for synchronizing with ISR */
 275
 276         struct work_struct task;
 277         u32 pending_bh;
 278         bool bh_requested;
 279         bool bh_running;
 280
 281         int isr_overflow;
 282         bool irq_requested;     /* true if IRQ requested */
 283         bool irq_occurred;      /* for diagnostics use */
 284
 285         /* device configuration */
 286
 287         unsigned int bus_type;
 288         unsigned int irq_level;
 289         unsigned long irq_flags;
 290
 291         unsigned char __iomem * reg_addr;  /* memory mapped registers address */
 292         u32 phys_reg_addr;
 293         bool reg_addr_requested;
 294
 295         MGSL_PARAMS params;       /* communications parameters */
 296         u32 idle_mode;
 297         u32 max_frame_size;       /* as set by device config */
 298
 299         unsigned int rbuf_fill_level;
 300         unsigned int if_mode;
 301
 302         /* device status */
 303
 304         bool rx_enabled;
 305         bool rx_restart;
 306
 307         bool tx_enabled;
 308         bool tx_active;
 309
 310         unsigned char signals;    /* serial signal states */
 311         int init_error;  /* initialization error */
 312
 313         unsigned char *tx_buf;
 314         int tx_count;
 315
 316         char flag_buf[MAX_ASYNC_BUFFER_SIZE];
 317         char char_buf[MAX_ASYNC_BUFFER_SIZE];
 318         bool drop_rts_on_tx_done;
 319         struct  _input_signal_events    input_signal_events;
 320
 321         int dcd_chkcount;       /* check counts to prevent */
 322         int cts_chkcount;       /* too many IRQs if a signal */
 323         int dsr_chkcount;       /* is floating */
 324         int ri_chkcount;
 325
 326         char *bufs;             /* virtual address of DMA buffer lists */
 327         dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
 328
 329         unsigned int rbuf_count;
 330         struct slgt_desc *rbufs;
 331         unsigned int rbuf_current;
 332         unsigned int rbuf_index;
 333
 334         unsigned int tbuf_count;
 335         struct slgt_desc *tbufs;
 336         unsigned int tbuf_current;
 337         unsigned int tbuf_start;
 338
 339         unsigned char *tmp_rbuf;
 340         unsigned int tmp_rbuf_count;
 341
 342         /* SPPP/Cisco HDLC device parts */
 343
 344         int netcount;
 345         spinlock_t netlock;
 346 #if SYNCLINK_GENERIC_HDLC
 347         struct net_device *netdev;
 348 #endif
 349
 350 };
 351
 352 static MGSL_PARAMS default_params = {
 353         .mode            = MGSL_MODE_HDLC,
 354         .loopback        = 0,
 355         .flags           = HDLC_FLAG_UNDERRUN_ABORT15,
 356         .encoding        = HDLC_ENCODING_NRZI_SPACE,
 357         .clock_speed     = 0,
 358         .addr_filter     = 0xff,
 359         .crc_type        = HDLC_CRC_16_CCITT,
 360         .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
 361         .preamble        = HDLC_PREAMBLE_PATTERN_NONE,
 362         .data_rate       = 9600,
 363         .data_bits       = 8,
 364         .stop_bits       = 1,
 365         .parity          = ASYNC_PARITY_NONE
 366 };
 367
 368
 369 #define BH_RECEIVE  1
 370 #define BH_TRANSMIT 2
 371 #define BH_STATUS   4
 372 #define IO_PIN_SHUTDOWN_LIMIT 100
 373
 374 #define DMABUFSIZE 256
 375 #define DESC_LIST_SIZE 4096
 376
 377 #define MASK_PARITY  BIT1
 378 #define MASK_FRAMING BIT0
 379 #define MASK_BREAK   BIT14
 380 #define MASK_OVERRUN BIT4
 381
 382 #define GSR   0x00 /* global status */
 383 #define JCR   0x04 /* JTAG control */
 384 #define IODR  0x08 /* GPIO direction */
 385 #define IOER  0x0c /* GPIO interrupt enable */
 386 #define IOVR  0x10 /* GPIO value */
 387 #define IOSR  0x14 /* GPIO interrupt status */
 388 #define TDR   0x80 /* tx data */
 389 #define RDR   0x80 /* rx data */
 390 #define TCR   0x82 /* tx control */
 391 #define TIR   0x84 /* tx idle */
 392 #define TPR   0x85 /* tx preamble */
 393 #define RCR   0x86 /* rx control */
 394 #define VCR   0x88 /* V.24 control */
 395 #define CCR   0x89 /* clock control */
 396 #define BDR   0x8a /* baud divisor */
 397 #define SCR   0x8c /* serial control */
 398 #define SSR   0x8e /* serial status */
 399 #define RDCSR 0x90 /* rx DMA control/status */
 400 #define TDCSR 0x94 /* tx DMA control/status */
 401 #define RDDAR 0x98 /* rx DMA descriptor address */
 402 #define TDDAR 0x9c /* tx DMA descriptor address */
 403
 404 #define RXIDLE      BIT14
 405 #define RXBREAK     BIT14
 406 #define IRQ_TXDATA  BIT13
 407 #define IRQ_TXIDLE  BIT12
 408 #define IRQ_TXUNDER BIT11 /* HDLC */
 409 #define IRQ_RXDATA  BIT10
 410 #define IRQ_RXIDLE  BIT9  /* HDLC */
 411 #define IRQ_RXBREAK BIT9  /* async */
 412 #define IRQ_RXOVER  BIT8
 413 #define IRQ_DSR     BIT7
 414 #define IRQ_CTS     BIT6
 415 #define IRQ_DCD     BIT5
 416 #define IRQ_RI      BIT4
 417 #define IRQ_ALL     0x3ff0
 418 #define IRQ_MASTER  BIT0
 419
 420 #define slgt_irq_on(info, mask) \
 421         wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
 422 #define slgt_irq_off(info, mask) \
 423         wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
 424
 425 static __u8  rd_reg8(struct slgt_info *info, unsigned int addr);
 426 static void  wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
 427 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
 428 static void  wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
 429 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
 430 static void  wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
 431
 432 static void  msc_set_vcr(struct slgt_info *info);
 433
 434 static int  startup(struct slgt_info *info);
 435 static int  block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
 436 static void shutdown(struct slgt_info *info);
 437 static void program_hw(struct slgt_info *info);
 438 static void change_params(struct slgt_info *info);
 439
 440 static int  register_test(struct slgt_info *info);
 441 static int  irq_test(struct slgt_info *info);
 442 static int  loopback_test(struct slgt_info *info);
 443 static int  adapter_test(struct slgt_info *info);
 444
 445 static void reset_adapter(struct slgt_info *info);
 446 static void reset_port(struct slgt_info *info);
 447 static void async_mode(struct slgt_info *info);
 448 static void sync_mode(struct slgt_info *info);
 449
 450 static void rx_stop(struct slgt_info *info);
 451 static void rx_start(struct slgt_info *info);
 452 static void reset_rbufs(struct slgt_info *info);
 453 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
 454 static void rdma_reset(struct slgt_info *info);
 455 static bool rx_get_frame(struct slgt_info *info);
 456 static bool rx_get_buf(struct slgt_info *info);
 457
 458 static void tx_start(struct slgt_info *info);
 459 static void tx_stop(struct slgt_info *info);
 460 static void tx_set_idle(struct slgt_info *info);
 461 static unsigned int free_tbuf_count(struct slgt_info *info);
 462 static unsigned int tbuf_bytes(struct slgt_info *info);
 463 static void reset_tbufs(struct slgt_info *info);
 464 static void tdma_reset(struct slgt_info *info);
 465 static void tdma_start(struct slgt_info *info);
 466 static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
 467
 468 static void get_signals(struct slgt_info *info);
 469 static void set_signals(struct slgt_info *info);
 470 static void enable_loopback(struct slgt_info *info);
 471 static void set_rate(struct slgt_info *info, u32 data_rate);
 472
 473 static int  bh_action(struct slgt_info *info);
 474 static void bh_handler(struct work_struct *work);
 475 static void bh_transmit(struct slgt_info *info);
 476 static void isr_serial(struct slgt_info *info);
 477 static void isr_rdma(struct slgt_info *info);
 478 static void isr_txeom(struct slgt_info *info, unsigned short status);
 479 static void isr_tdma(struct slgt_info *info);
 480
 481 static int  alloc_dma_bufs(struct slgt_info *info);
 482 static void free_dma_bufs(struct slgt_info *info);
 483 static int  alloc_desc(struct slgt_info *info);
 484 static void free_desc(struct slgt_info *info);
 485 static int  alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
 486 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
 487
 488 static int  alloc_tmp_rbuf(struct slgt_info *info);
 489 static void free_tmp_rbuf(struct slgt_info *info);
 490
 491 static void tx_timeout(unsigned long context);
 492 static void rx_timeout(unsigned long context);
 493
 494 /*
 495  * ioctl handlers
 496  */
 497 static int  get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
 498 static int  get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
 499 static int  set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
 500 static int  get_txidle(struct slgt_info *info, int __user *idle_mode);
 501 static int  set_txidle(struct slgt_info *info, int idle_mode);
 502 static int  tx_enable(struct slgt_info *info, int enable);
 503 static int  tx_abort(struct slgt_info *info);
 504 static int  rx_enable(struct slgt_info *info, int enable);
 505 static int  modem_input_wait(struct slgt_info *info,int arg);
 506 static int  wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
 507 static int  tiocmget(struct tty_struct *tty, struct file *file);
 508 static int  tiocmset(struct tty_struct *tty, struct file *file,
 509                      unsigned int set, unsigned int clear);
 510 static int set_break(struct tty_struct *tty, int break_state);
 511 static int  get_interface(struct slgt_info *info, int __user *if_mode);
 512 static int  set_interface(struct slgt_info *info, int if_mode);
 513 static int  set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
 514 static int  get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
 515 static int  wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
 516
 517 /*
 518  * driver functions
 519  */
 520 static void add_device(struct slgt_info *info);
 521 static void device_init(int adapter_num, struct pci_dev *pdev);
 522 static int  claim_resources(struct slgt_info *info);
 523 static void release_resources(struct slgt_info *info);
 524
 525 /*
 526  * DEBUG OUTPUT CODE
 527  */
 528 #ifndef DBGINFO
 529 #define DBGINFO(fmt)
 530 #endif
 531 #ifndef DBGERR
 532 #define DBGERR(fmt)
 533 #endif
 534 #ifndef DBGBH
 535 #define DBGBH(fmt)
 536 #endif
 537 #ifndef DBGISR
 538 #define DBGISR(fmt)
 539 #endif
 540
 541 #ifdef DBGDATA
 542 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
 543 {
 544         int i;
 545         int linecount;
 546         printk("%s %s data:\n",info->device_name, label);
 547         while(count) {
 548                 linecount = (count > 16) ? 16 : count;
 549                 for(i=0; i < linecount; i++)
 550                         printk("%02X ",(unsigned char)data[i]);
 551                 for(;i<17;i++)
 552                         printk("   ");
 553                 for(i=0;i<linecount;i++) {
 554                         if (data[i]>=040 && data[i]<=0176)
 555                                 printk("%c",data[i]);
 556                         else
 557                                 printk(".");
 558                 }
 559                 printk("\n");
 560                 data  += linecount;
 561                 count -= linecount;
 562         }
 563 }
 564 #else
 565 #define DBGDATA(info, buf, size, label)
 566 #endif
 567
 568 #ifdef DBGTBUF
 569 static void dump_tbufs(struct slgt_info *info)
 570 {
 571         int i;
 572         printk("tbuf_current=%d\n", info->tbuf_current);
 573         for (i=0 ; i < info->tbuf_count ; i++) {
 574                 printk("%d: count=%04X status=%04X\n",
 575                         i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
 576         }
 577 }
 578 #else
 579 #define DBGTBUF(info)
 580 #endif
 581
 582 #ifdef DBGRBUF
 583 static void dump_rbufs(struct slgt_info *info)
 584 {
 585         int i;
 586         printk("rbuf_current=%d\n", info->rbuf_current);
 587         for (i=0 ; i < info->rbuf_count ; i++) {
 588                 printk("%d: count=%04X status=%04X\n",
 589                         i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
 590         }
 591 }
 592 #else
 593 #define DBGRBUF(info)
 594 #endif
 595
 596 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
 597 {
 598 #ifdef SANITY_CHECK
 599         if (!info) {
 600                 printk("null struct slgt_info for (%s) in %s\n", devname, name);
 601                 return 1;
 602         }
 603         if (info->magic != MGSL_MAGIC) {
 604                 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
 605                 return 1;
 606         }
 607 #else
 608         if (!info)
 609                 return 1;
 610 #endif
 611         return 0;
 612 }
 613
 614 /**
 615  * line discipline callback wrappers
 616  *
 617  * The wrappers maintain line discipline references
 618  * while calling into the line discipline.
 619  *
 620  * ldisc_receive_buf  - pass receive data to line discipline
 621  */
 622 static void ldisc_receive_buf(struct tty_struct *tty,
 623                               const __u8 *data, char *flags, int count)
 624 {
 625         struct tty_ldisc *ld;
 626         if (!tty)
 627                 return;
 628         ld = tty_ldisc_ref(tty);
 629         if (ld) {
 630                 if (ld->ops->receive_buf)
 631                         ld->ops->receive_buf(tty, data, flags, count);
 632                 tty_ldisc_deref(ld);
 633         }
 634 }
 635
 636 /* tty callbacks */
 637
 638 static int open(struct tty_struct *tty, struct file *filp)
 639 {
 640         struct slgt_info *info;
 641         int retval, line;
 642         unsigned long flags;
 643
 644         line = tty->index;
 645         if ((line < 0) || (line >= slgt_device_count)) {
 646                 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
 647                 return -ENODEV;
 648         }
 649
 650         info = slgt_device_list;
 651         while(info && info->line != line)
 652                 info = info->next_device;
 653         if (sanity_check(info, tty->name, "open"))
 654                 return -ENODEV;
 655         if (info->init_error) {
 656                 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
 657                 return -ENODEV;
 658         }
 659
 660         tty->driver_data = info;
 661         info->port.tty = tty;
 662
 663         DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
 664
 665         /* If port is closing, signal caller to try again */
 666         if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
 667                 if (info->port.flags & ASYNC_CLOSING)
 668                         interruptible_sleep_on(&info->port.close_wait);
 669                 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 670                         -EAGAIN : -ERESTARTSYS);
 671                 goto cleanup;
 672         }
 673
 674         info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 675
 676         spin_lock_irqsave(&info->netlock, flags);
 677         if (info->netcount) {
 678                 retval = -EBUSY;
 679                 spin_unlock_irqrestore(&info->netlock, flags);
 680                 goto cleanup;
 681         }
 682         info->port.count++;
 683         spin_unlock_irqrestore(&info->netlock, flags);
 684
 685         if (info->port.count == 1) {
 686                 /* 1st open on this device, init hardware */
 687                 retval = startup(info);
 688                 if (retval < 0)
 689                         goto cleanup;
 690         }
 691
 692         retval = block_til_ready(tty, filp, info);
 693         if (retval) {
 694                 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
 695                 goto cleanup;
 696         }
 697
 698         retval = 0;
 699
 700 cleanup:
 701         if (retval) {
 702                 if (tty->count == 1)
 703                         info->port.tty = NULL; /* tty layer will release tty struct */
 704                 if(info->port.count)
 705                         info->port.count--;
 706         }
 707
 708         DBGINFO(("%s open rc=%d\n", info->device_name, retval));
 709         return retval;
 710 }
 711
 712 static void close(struct tty_struct *tty, struct file *filp)
 713 {
 714         struct slgt_info *info = tty->driver_data;
 715
 716         if (sanity_check(info, tty->name, "close"))
 717                 return;
 718         DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
 719
 720         if (tty_port_close_start(&info->port, tty, filp) == 0)
 721                 goto cleanup;
 722
 723         if (info->port.flags & ASYNC_INITIALIZED)
 724                 wait_until_sent(tty, info->timeout);
 725         flush_buffer(tty);
 726         tty_ldisc_flush(tty);
 727
 728         shutdown(info);
 729
 730         tty_port_close_end(&info->port, tty);
 731         info->port.tty = NULL;
 732 cleanup:
 733         DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
 734 }
 735
 736 static void hangup(struct tty_struct *tty)
 737 {
 738         struct slgt_info *info = tty->driver_data;
 739
 740         if (sanity_check(info, tty->name, "hangup"))
 741                 return;
 742         DBGINFO(("%s hangup\n", info->device_name));
 743
 744         flush_buffer(tty);
 745         shutdown(info);
 746
 747         info->port.count = 0;
 748         info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 749         info->port.tty = NULL;
 750
 751         wake_up_interruptible(&info->port.open_wait);
 752 }
 753
 754 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 755 {
 756         struct slgt_info *info = tty->driver_data;
 757         unsigned long flags;
 758
 759         DBGINFO(("%s set_termios\n", tty->driver->name));
 760
 761         change_params(info);
 762
 763         /* Handle transition to B0 status */
 764         if (old_termios->c_cflag & CBAUD &&
 765             !(tty->termios->c_cflag & CBAUD)) {
 766                 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
 767                 spin_lock_irqsave(&info->lock,flags);
 768                 set_signals(info);
 769                 spin_unlock_irqrestore(&info->lock,flags);
 770         }
 771
 772         /* Handle transition away from B0 status */
 773         if (!(old_termios->c_cflag & CBAUD) &&
 774             tty->termios->c_cflag & CBAUD) {
 775                 info->signals |= SerialSignal_DTR;
 776                 if (!(tty->termios->c_cflag & CRTSCTS) ||
 777                     !test_bit(TTY_THROTTLED, &tty->flags)) {
 778                         info->signals |= SerialSignal_RTS;
 779                 }
 780                 spin_lock_irqsave(&info->lock,flags);
 781                 set_signals(info);
 782                 spin_unlock_irqrestore(&info->lock,flags);
 783         }
 784
 785         /* Handle turning off CRTSCTS */
 786         if (old_termios->c_cflag & CRTSCTS &&
 787             !(tty->termios->c_cflag & CRTSCTS)) {
 788                 tty->hw_stopped = 0;
 789                 tx_release(tty);
 790         }
 791 }
 792
 793 static int write(struct tty_struct *tty,
 794                  const unsigned char *buf, int count)
 795 {
 796         int ret = 0;
 797         struct slgt_info *info = tty->driver_data;
 798         unsigned long flags;
 799         unsigned int bufs_needed;
 800
 801         if (sanity_check(info, tty->name, "write"))
 802                 goto cleanup;
 803         DBGINFO(("%s write count=%d\n", info->device_name, count));
 804
 805         if (!info->tx_buf)
 806                 goto cleanup;
 807
 808         if (count > info->max_frame_size) {
 809                 ret = -EIO;
 810                 goto cleanup;
 811         }
 812
 813         if (!count)
 814                 goto cleanup;
 815
 816         if (!info->tx_active && info->tx_count) {
 817                 /* send accumulated data from send_char() */
 818                 tx_load(info, info->tx_buf, info->tx_count);
 819                 goto start;
 820         }
 821         bufs_needed = (count/DMABUFSIZE);
 822         if (count % DMABUFSIZE)
 823                 ++bufs_needed;
 824         if (bufs_needed > free_tbuf_count(info))
 825                 goto cleanup;
 826
 827         ret = info->tx_count = count;
 828         tx_load(info, buf, count);
 829         goto start;
 830
 831 start:
 832         if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
 833                 spin_lock_irqsave(&info->lock,flags);
 834                 if (!info->tx_active)
 835                         tx_start(info);
 836                 else
 837                         tdma_start(info);
 838                 spin_unlock_irqrestore(&info->lock,flags);
 839         }
 840
 841 cleanup:
 842         DBGINFO(("%s write rc=%d\n", info->device_name, ret));
 843         return ret;
 844 }
 845
 846 static int put_char(struct tty_struct *tty, unsigned char ch)
 847 {
 848         struct slgt_info *info = tty->driver_data;
 849         unsigned long flags;
 850         int ret = 0;
 851
 852         if (sanity_check(info, tty->name, "put_char"))
 853                 return 0;
 854         DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
 855         if (!info->tx_buf)
 856                 return 0;
 857         spin_lock_irqsave(&info->lock,flags);
 858         if (!info->tx_active && (info->tx_count < info->max_frame_size)) {
 859                 info->tx_buf[info->tx_count++] = ch;
 860                 ret = 1;
 861         }
 862         spin_unlock_irqrestore(&info->lock,flags);
 863         return ret;
 864 }
 865
 866 static void send_xchar(struct tty_struct *tty, char ch)
 867 {
 868         struct slgt_info *info = tty->driver_data;
 869         unsigned long flags;
 870
 871         if (sanity_check(info, tty->name, "send_xchar"))
 872                 return;
 873         DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
 874         info->x_char = ch;
 875         if (ch) {
 876                 spin_lock_irqsave(&info->lock,flags);
 877                 if (!info->tx_enabled)
 878                         tx_start(info);
 879                 spin_unlock_irqrestore(&info->lock,flags);
 880         }
 881 }
 882
 883 static void wait_until_sent(struct tty_struct *tty, int timeout)
 884 {
 885         struct slgt_info *info = tty->driver_data;
 886         unsigned long orig_jiffies, char_time;
 887
 888         if (!info )
 889                 return;
 890         if (sanity_check(info, tty->name, "wait_until_sent"))
 891                 return;
 892         DBGINFO(("%s wait_until_sent entry\n", info->device_name));
 893         if (!(info->port.flags & ASYNC_INITIALIZED))
 894                 goto exit;
 895
 896         orig_jiffies = jiffies;
 897
 898         /* Set check interval to 1/5 of estimated time to
 899          * send a character, and make it at least 1. The check
 900          * interval should also be less than the timeout.
 901          * Note: use tight timings here to satisfy the NIST-PCTS.
 902          */
 903
 904         lock_kernel();
 905
 906         if (info->params.data_rate) {
 907                 char_time = info->timeout/(32 * 5);
 908                 if (!char_time)
 909                         char_time++;
 910         } else
 911                 char_time = 1;
 912
 913         if (timeout)
 914                 char_time = min_t(unsigned long, char_time, timeout);
 915
 916         while (info->tx_active) {
 917                 msleep_interruptible(jiffies_to_msecs(char_time));
 918                 if (signal_pending(current))
 919                         break;
 920                 if (timeout && time_after(jiffies, orig_jiffies + timeout))
 921                         break;
 922         }
 923         unlock_kernel();
 924
 925 exit:
 926         DBGINFO(("%s wait_until_sent exit\n", info->device_name));
 927 }
 928
 929 static int write_room(struct tty_struct *tty)
 930 {
 931         struct slgt_info *info = tty->driver_data;
 932         int ret;
 933
 934         if (sanity_check(info, tty->name, "write_room"))
 935                 return 0;
 936         ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
 937         DBGINFO(("%s write_room=%d\n", info->device_name, ret));
 938         return ret;
 939 }
 940
 941 static void flush_chars(struct tty_struct *tty)
 942 {
 943         struct slgt_info *info = tty->driver_data;
 944         unsigned long flags;
 945
 946         if (sanity_check(info, tty->name, "flush_chars"))
 947                 return;
 948         DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
 949
 950         if (info->tx_count <= 0 || tty->stopped ||
 951             tty->hw_stopped || !info->tx_buf)
 952                 return;
 953
 954         DBGINFO(("%s flush_chars start transmit\n", info->device_name));
 955
 956         spin_lock_irqsave(&info->lock,flags);
 957         if (!info->tx_active && info->tx_count) {
 958                 tx_load(info, info->tx_buf,info->tx_count);
 959                 tx_start(info);
 960         }
 961         spin_unlock_irqrestore(&info->lock,flags);
 962 }
 963
 964 static void flush_buffer(struct tty_struct *tty)
 965 {
 966         struct slgt_info *info = tty->driver_data;
 967         unsigned long flags;
 968
 969         if (sanity_check(info, tty->name, "flush_buffer"))
 970                 return;
 971         DBGINFO(("%s flush_buffer\n", info->device_name));
 972
 973         spin_lock_irqsave(&info->lock,flags);
 974         if (!info->tx_active)
 975                 info->tx_count = 0;
 976         spin_unlock_irqrestore(&info->lock,flags);
 977
 978         tty_wakeup(tty);
 979 }
 980
 981 /*
 982  * throttle (stop) transmitter
 983  */
 984 static void tx_hold(struct tty_struct *tty)
 985 {
 986         struct slgt_info *info = tty->driver_data;
 987         unsigned long flags;
 988
 989         if (sanity_check(info, tty->name, "tx_hold"))
 990                 return;
 991         DBGINFO(("%s tx_hold\n", info->device_name));
 992         spin_lock_irqsave(&info->lock,flags);
 993         if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
 994                 tx_stop(info);
 995         spin_unlock_irqrestore(&info->lock,flags);
 996 }
 997
 998 /*
 999  * release (start) transmitter
1000  */
1001 static void tx_release(struct tty_struct *tty)
1002 {
1003         struct slgt_info *info = tty->driver_data;
1004         unsigned long flags;
1005
1006         if (sanity_check(info, tty->name, "tx_release"))
1007                 return;
1008         DBGINFO(("%s tx_release\n", info->device_name));
1009         spin_lock_irqsave(&info->lock,flags);
1010         if (!info->tx_active && info->tx_count) {
1011                 tx_load(info, info->tx_buf, info->tx_count);
1012                 tx_start(info);
1013         }
1014         spin_unlock_irqrestore(&info->lock,flags);
1015 }
1016
1017 /*
1018  * Service an IOCTL request
1019  *
1020  * Arguments
1021  *
1022  *      tty     pointer to tty instance data
1023  *      file    pointer to associated file object for device
1024  *      cmd     IOCTL command code
1025  *      arg     command argument/context
1026  *
1027  * Return 0 if success, otherwise error code
1028  */
1029 static int ioctl(struct tty_struct *tty, struct file *file,
1030                  unsigned int cmd, unsigned long arg)
1031 {
1032         struct slgt_info *info = tty->driver_data;
1033         struct mgsl_icount cnow;        /* kernel counter temps */
1034         struct serial_icounter_struct __user *p_cuser;  /* user space */
1035         unsigned long flags;
1036         void __user *argp = (void __user *)arg;
1037         int ret;
1038
1039         if (sanity_check(info, tty->name, "ioctl"))
1040                 return -ENODEV;
1041         DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1042
1043         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1044             (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1045                 if (tty->flags & (1 << TTY_IO_ERROR))
1046                     return -EIO;
1047         }
1048
1049         lock_kernel();
1050
1051         switch (cmd) {
1052         case MGSL_IOCGPARAMS:
1053                 ret = get_params(info, argp);
1054                 break;
1055         case MGSL_IOCSPARAMS:
1056                 ret = set_params(info, argp);
1057                 break;
1058         case MGSL_IOCGTXIDLE:
1059                 ret = get_txidle(info, argp);
1060                 break;
1061         case MGSL_IOCSTXIDLE:
1062                 ret = set_txidle(info, (int)arg);
1063                 break;
1064         case MGSL_IOCTXENABLE:
1065                 ret = tx_enable(info, (int)arg);
1066                 break;
1067         case MGSL_IOCRXENABLE:
1068                 ret = rx_enable(info, (int)arg);
1069                 break;
1070         case MGSL_IOCTXABORT:
1071                 ret = tx_abort(info);
1072                 break;
1073         case MGSL_IOCGSTATS:
1074                 ret = get_stats(info, argp);
1075                 break;
1076         case MGSL_IOCWAITEVENT:
1077                 ret = wait_mgsl_event(info, argp);
1078                 break;
1079         case TIOCMIWAIT:
1080                 ret = modem_input_wait(info,(int)arg);
1081                 break;
1082         case MGSL_IOCGIF:
1083                 ret = get_interface(info, argp);
1084                 break;
1085         case MGSL_IOCSIF:
1086                 ret = set_interface(info,(int)arg);
1087                 break;
1088         case MGSL_IOCSGPIO:
1089                 ret = set_gpio(info, argp);
1090                 break;
1091         case MGSL_IOCGGPIO:
1092                 ret = get_gpio(info, argp);
1093                 break;
1094         case MGSL_IOCWAITGPIO:
1095                 ret = wait_gpio(info, argp);
1096                 break;
1097         case TIOCGICOUNT:
1098                 spin_lock_irqsave(&info->lock,flags);
1099                 cnow = info->icount;
1100                 spin_unlock_irqrestore(&info->lock,flags);
1101                 p_cuser = argp;
1102                 if (put_user(cnow.cts, &p_cuser->cts) ||
1103                     put_user(cnow.dsr, &p_cuser->dsr) ||
1104                     put_user(cnow.rng, &p_cuser->rng) ||
1105                     put_user(cnow.dcd, &p_cuser->dcd) ||
1106                     put_user(cnow.rx, &p_cuser->rx) ||
1107                     put_user(cnow.tx, &p_cuser->tx) ||
1108                     put_user(cnow.frame, &p_cuser->frame) ||
1109                     put_user(cnow.overrun, &p_cuser->overrun) ||
1110                     put_user(cnow.parity, &p_cuser->parity) ||
1111                     put_user(cnow.brk, &p_cuser->brk) ||
1112                     put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
1113                         ret = -EFAULT;
1114                 ret = 0;
1115                 break;
1116         default:
1117                 ret = -ENOIOCTLCMD;
1118         }
1119         unlock_kernel();
1120         return ret;
1121 }
1122
1123 /*
1124  * support for 32 bit ioctl calls on 64 bit systems
1125  */
1126 #ifdef CONFIG_COMPAT
1127 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
1128 {
1129         struct MGSL_PARAMS32 tmp_params;
1130
1131         DBGINFO(("%s get_params32\n", info->device_name));
1132         tmp_params.mode            = (compat_ulong_t)info->params.mode;
1133         tmp_params.loopback        = info->params.loopback;
1134         tmp_params.flags           = info->params.flags;
1135         tmp_params.encoding        = info->params.encoding;
1136         tmp_params.clock_speed     = (compat_ulong_t)info->params.clock_speed;
1137         tmp_params.addr_filter     = info->params.addr_filter;
1138         tmp_params.crc_type        = info->params.crc_type;
1139         tmp_params.preamble_length = info->params.preamble_length;
1140         tmp_params.preamble        = info->params.preamble;
1141         tmp_params.data_rate       = (compat_ulong_t)info->params.data_rate;
1142         tmp_params.data_bits       = info->params.data_bits;
1143         tmp_params.stop_bits       = info->params.stop_bits;
1144         tmp_params.parity          = info->params.parity;
1145         if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
1146                 return -EFAULT;
1147         return 0;
1148 }
1149
1150 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
1151 {
1152         struct MGSL_PARAMS32 tmp_params;
1153
1154         DBGINFO(("%s set_params32\n", info->device_name));
1155         if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
1156                 return -EFAULT;
1157
1158         spin_lock(&info->lock);
1159         info->params.mode            = tmp_params.mode;
1160         info->params.loopback        = tmp_params.loopback;
1161         info->params.flags           = tmp_params.flags;
1162         info->params.encoding        = tmp_params.encoding;
1163         info->params.clock_speed     = tmp_params.clock_speed;
1164         info->params.addr_filter     = tmp_params.addr_filter;
1165         info->params.crc_type        = tmp_params.crc_type;
1166         info->params.preamble_length = tmp_params.preamble_length;
1167         info->params.preamble        = tmp_params.preamble;
1168         info->params.data_rate       = tmp_params.data_rate;
1169         info->params.data_bits       = tmp_params.data_bits;
1170         info->params.stop_bits       = tmp_params.stop_bits;
1171         info->params.parity          = tmp_params.parity;
1172         spin_unlock(&info->lock);
1173
1174         change_params(info);
1175
1176         return 0;
1177 }
1178
1179 static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
1180                          unsigned int cmd, unsigned long arg)
1181 {
1182         struct slgt_info *info = tty->driver_data;
1183         int rc = -ENOIOCTLCMD;
1184
1185         if (sanity_check(info, tty->name, "compat_ioctl"))
1186                 return -ENODEV;
1187         DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
1188
1189         switch (cmd) {
1190
1191         case MGSL_IOCSPARAMS32:
1192                 rc = set_params32(info, compat_ptr(arg));
1193                 break;
1194
1195         case MGSL_IOCGPARAMS32:
1196                 rc = get_params32(info, compat_ptr(arg));
1197                 break;
1198
1199         case MGSL_IOCGPARAMS:
1200         case MGSL_IOCSPARAMS:
1201         case MGSL_IOCGTXIDLE:
1202         case MGSL_IOCGSTATS:
1203         case MGSL_IOCWAITEVENT:
1204         case MGSL_IOCGIF:
1205         case MGSL_IOCSGPIO:
1206         case MGSL_IOCGGPIO:
1207         case MGSL_IOCWAITGPIO:
1208         case TIOCGICOUNT:
1209                 rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
1210                 break;
1211
1212         case MGSL_IOCSTXIDLE:
1213         case MGSL_IOCTXENABLE:
1214         case MGSL_IOCRXENABLE:
1215         case MGSL_IOCTXABORT:
1216         case TIOCMIWAIT:
1217         case MGSL_IOCSIF:
1218                 rc = ioctl(tty, file, cmd, arg);
1219                 break;
1220         }
1221
1222         DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
1223         return rc;
1224 }
1225 #else
1226 #define slgt_compat_ioctl NULL
1227 #endif /* ifdef CONFIG_COMPAT */
1228
1229 /*
1230  * proc fs support
1231  */
1232 static inline int line_info(char *buf, struct slgt_info *info)
1233 {
1234         char stat_buf[30];
1235         int ret;
1236         unsigned long flags;
1237
1238         ret = sprintf(buf, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1239                       info->device_name, info->phys_reg_addr,
1240                       info->irq_level, info->max_frame_size);
1241
1242         /* output current serial signal states */
1243         spin_lock_irqsave(&info->lock,flags);
1244         get_signals(info);
1245         spin_unlock_irqrestore(&info->lock,flags);
1246
1247         stat_buf[0] = 0;
1248         stat_buf[1] = 0;
1249         if (info->signals & SerialSignal_RTS)
1250                 strcat(stat_buf, "|RTS");
1251         if (info->signals & SerialSignal_CTS)
1252                 strcat(stat_buf, "|CTS");
1253         if (info->signals & SerialSignal_DTR)
1254                 strcat(stat_buf, "|DTR");
1255         if (info->signals & SerialSignal_DSR)
1256                 strcat(stat_buf, "|DSR");
1257         if (info->signals & SerialSignal_DCD)
1258                 strcat(stat_buf, "|CD");
1259         if (info->signals & SerialSignal_RI)
1260                 strcat(stat_buf, "|RI");
1261
1262         if (info->params.mode != MGSL_MODE_ASYNC) {
1263                 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1264                                info->icount.txok, info->icount.rxok);
1265                 if (info->icount.txunder)
1266                         ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1267                 if (info->icount.txabort)
1268                         ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1269                 if (info->icount.rxshort)
1270                         ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1271                 if (info->icount.rxlong)
1272                         ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1273                 if (info->icount.rxover)
1274                         ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1275                 if (info->icount.rxcrc)
1276                         ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
1277         } else {
1278                 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1279                                info->icount.tx, info->icount.rx);
1280                 if (info->icount.frame)
1281                         ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1282                 if (info->icount.parity)
1283                         ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1284                 if (info->icount.brk)
1285                         ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1286                 if (info->icount.overrun)
1287                         ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1288         }
1289
1290         /* Append serial signal status to end */
1291         ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1292
1293         ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1294                        info->tx_active,info->bh_requested,info->bh_running,
1295                        info->pending_bh);
1296
1297         return ret;
1298 }
1299
1300 /* Called to print information about devices
1301  */
1302 static int read_proc(char *page, char **start, off_t off, int count,
1303                      int *eof, void *data)
1304 {
1305         int len = 0, l;
1306         off_t   begin = 0;
1307         struct slgt_info *info;
1308
1309         len += sprintf(page, "synclink_gt driver\n");
1310
1311         info = slgt_device_list;
1312         while( info ) {
1313                 l = line_info(page + len, info);
1314                 len += l;
1315                 if (len+begin > off+count)
1316                         goto done;
1317                 if (len+begin < off) {
1318                         begin += len;
1319                         len = 0;
1320                 }
1321                 info = info->next_device;
1322         }
1323
1324         *eof = 1;
1325 done:
1326         if (off >= len+begin)
1327                 return 0;
1328         *start = page + (off-begin);
1329         return ((count < begin+len-off) ? count : begin+len-off);
1330 }
1331
1332 /*
1333  * return count of bytes in transmit buffer
1334  */
1335 static int chars_in_buffer(struct tty_struct *tty)
1336 {
1337         struct slgt_info *info = tty->driver_data;
1338         int count;
1339         if (sanity_check(info, tty->name, "chars_in_buffer"))
1340                 return 0;
1341         count = tbuf_bytes(info);
1342         DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count));
1343         return count;
1344 }
1345
1346 /*
1347  * signal remote device to throttle send data (our receive data)
1348  */
1349 static void throttle(struct tty_struct * tty)
1350 {
1351         struct slgt_info *info = tty->driver_data;
1352         unsigned long flags;
1353
1354         if (sanity_check(info, tty->name, "throttle"))
1355                 return;
1356         DBGINFO(("%s throttle\n", info->device_name));
1357         if (I_IXOFF(tty))
1358                 send_xchar(tty, STOP_CHAR(tty));
1359         if (tty->termios->c_cflag & CRTSCTS) {
1360                 spin_lock_irqsave(&info->lock,flags);
1361                 info->signals &= ~SerialSignal_RTS;
1362                 set_signals(info);
1363                 spin_unlock_irqrestore(&info->lock,flags);
1364         }
1365 }
1366
1367 /*
1368  * signal remote device to stop throttling send data (our receive data)
1369  */
1370 static void unthrottle(struct tty_struct * tty)
1371 {
1372         struct slgt_info *info = tty->driver_data;
1373         unsigned long flags;
1374
1375         if (sanity_check(info, tty->name, "unthrottle"))
1376                 return;
1377         DBGINFO(("%s unthrottle\n", info->device_name));
1378         if (I_IXOFF(tty)) {
1379                 if (info->x_char)
1380                         info->x_char = 0;
1381                 else
1382                         send_xchar(tty, START_CHAR(tty));
1383         }
1384         if (tty->termios->c_cflag & CRTSCTS) {
1385                 spin_lock_irqsave(&info->lock,flags);
1386                 info->signals |= SerialSignal_RTS;
1387                 set_signals(info);
1388                 spin_unlock_irqrestore(&info->lock,flags);
1389         }
1390 }
1391
1392 /*
1393  * set or clear transmit break condition
1394  * break_state  -1=set break condition, 0=clear
1395  */
1396 static int set_break(struct tty_struct *tty, int break_state)
1397 {
1398         struct slgt_info *info = tty->driver_data;
1399         unsigned short value;
1400         unsigned long flags;
1401
1402         if (sanity_check(info, tty->name, "set_break"))
1403                 return -EINVAL;
1404         DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1405
1406         spin_lock_irqsave(&info->lock,flags);
1407         value = rd_reg16(info, TCR);
1408         if (break_state == -1)
1409                 value |= BIT6;
1410         else
1411                 value &= ~BIT6;
1412         wr_reg16(info, TCR, value);
1413         spin_unlock_irqrestore(&info->lock,flags);
1414         return 0;
1415 }
1416
1417 #if SYNCLINK_GENERIC_HDLC
1418
1419 /**
1420  * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1421  * set encoding and frame check sequence (FCS) options
1422  *
1423  * dev       pointer to network device structure
1424  * encoding  serial encoding setting
1425  * parity    FCS setting
1426  *
1427  * returns 0 if success, otherwise error code
1428  */
1429 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1430                           unsigned short parity)
1431 {
1432         struct slgt_info *info = dev_to_port(dev);
1433         unsigned char  new_encoding;
1434         unsigned short new_crctype;
1435
1436         /* return error if TTY interface open */
1437         if (info->port.count)
1438                 return -EBUSY;
1439
1440         DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1441
1442         switch (encoding)
1443         {
1444         case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
1445         case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1446         case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1447         case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1448         case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1449         default: return -EINVAL;
1450         }
1451
1452         switch (parity)
1453         {
1454         case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
1455         case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1456         case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1457         default: return -EINVAL;
1458         }
1459
1460         info->params.encoding = new_encoding;
1461         info->params.crc_type = new_crctype;
1462
1463         /* if network interface up, reprogram hardware */
1464         if (info->netcount)
1465                 program_hw(info);
1466
1467         return 0;
1468 }
1469
1470 /**
1471  * called by generic HDLC layer to send frame
1472  *
1473  * skb  socket buffer containing HDLC frame
1474  * dev  pointer to network device structure
1475  *
1476  * returns 0 if success, otherwise error code
1477  */
1478 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1479 {
1480         struct slgt_info *info = dev_to_port(dev);
1481         unsigned long flags;
1482
1483         DBGINFO(("%s hdlc_xmit\n", dev->name));
1484
1485         /* stop sending until this frame completes */
1486         netif_stop_queue(dev);
1487
1488         /* copy data to device buffers */
1489         info->tx_count = skb->len;
1490         tx_load(info, skb->data, skb->len);
1491
1492         /* update network statistics */
1493         dev->stats.tx_packets++;
1494         dev->stats.tx_bytes += skb->len;
1495
1496         /* done with socket buffer, so free it */
1497         dev_kfree_skb(skb);
1498
1499         /* save start time for transmit timeout detection */
1500         dev->trans_start = jiffies;
1501
1502         /* start hardware transmitter if necessary */
1503         spin_lock_irqsave(&info->lock,flags);
1504         if (!info->tx_active)
1505                 tx_start(info);
1506         spin_unlock_irqrestore(&info->lock,flags);
1507
1508         return 0;
1509 }
1510
1511 /**
1512  * called by network layer when interface enabled
1513  * claim resources and initialize hardware
1514  *
1515  * dev  pointer to network device structure
1516  *
1517  * returns 0 if success, otherwise error code
1518  */
1519 static int hdlcdev_open(struct net_device *dev)
1520 {
1521         struct slgt_info *info = dev_to_port(dev);
1522         int rc;
1523         unsigned long flags;
1524
1525         if (!try_module_get(THIS_MODULE))
1526                 return -EBUSY;
1527
1528         DBGINFO(("%s hdlcdev_open\n", dev->name));
1529
1530         /* generic HDLC layer open processing */
1531         if ((rc = hdlc_open(dev)))
1532                 return rc;
1533
1534         /* arbitrate between network and tty opens */
1535         spin_lock_irqsave(&info->netlock, flags);
1536         if (info->port.count != 0 || info->netcount != 0) {
1537                 DBGINFO(("%s hdlc_open busy\n", dev->name));
1538                 spin_unlock_irqrestore(&info->netlock, flags);
1539                 return -EBUSY;
1540         }
1541         info->netcount=1;
1542         spin_unlock_irqrestore(&info->netlock, flags);
1543
1544         /* claim resources and init adapter */
1545         if ((rc = startup(info)) != 0) {
1546                 spin_lock_irqsave(&info->netlock, flags);
1547                 info->netcount=0;
1548                 spin_unlock_irqrestore(&info->netlock, flags);
1549                 return rc;
1550         }
1551
1552         /* assert DTR and RTS, apply hardware settings */
1553         info->signals |= SerialSignal_RTS + SerialSignal_DTR;
1554         program_hw(info);
1555
1556         /* enable network layer transmit */
1557         dev->trans_start = jiffies;
1558         netif_start_queue(dev);
1559
1560         /* inform generic HDLC layer of current DCD status */
1561         spin_lock_irqsave(&info->lock, flags);
1562         get_signals(info);
1563         spin_unlock_irqrestore(&info->lock, flags);
1564         if (info->signals & SerialSignal_DCD)
1565                 netif_carrier_on(dev);
1566         else
1567                 netif_carrier_off(dev);
1568         return 0;
1569 }
1570
1571 /**
1572  * called by network layer when interface is disabled
1573  * shutdown hardware and release resources
1574  *
1575  * dev  pointer to network device structure
1576  *
1577  * returns 0 if success, otherwise error code
1578  */
1579 static int hdlcdev_close(struct net_device *dev)
1580 {
1581         struct slgt_info *info = dev_to_port(dev);
1582         unsigned long flags;
1583
1584         DBGINFO(("%s hdlcdev_close\n", dev->name));
1585
1586         netif_stop_queue(dev);
1587
1588         /* shutdown adapter and release resources */
1589         shutdown(info);
1590
1591         hdlc_close(dev);
1592
1593         spin_lock_irqsave(&info->netlock, flags);
1594         info->netcount=0;
1595         spin_unlock_irqrestore(&info->netlock, flags);
1596
1597         module_put(THIS_MODULE);
1598         return 0;
1599 }
1600
1601 /**
1602  * called by network layer to process IOCTL call to network device
1603  *
1604  * dev  pointer to network device structure
1605  * ifr  pointer to network interface request structure
1606  * cmd  IOCTL command code
1607  *
1608  * returns 0 if success, otherwise error code
1609  */
1610 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1611 {
1612         const size_t size = sizeof(sync_serial_settings);
1613         sync_serial_settings new_line;
1614         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1615         struct slgt_info *info = dev_to_port(dev);
1616         unsigned int flags;
1617
1618         DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1619
1620         /* return error if TTY interface open */
1621         if (info->port.count)
1622                 return -EBUSY;
1623
1624         if (cmd != SIOCWANDEV)
1625                 return hdlc_ioctl(dev, ifr, cmd);
1626
1627         switch(ifr->ifr_settings.type) {
1628         case IF_GET_IFACE: /* return current sync_serial_settings */
1629
1630                 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1631                 if (ifr->ifr_settings.size < size) {
1632                         ifr->ifr_settings.size = size; /* data size wanted */
1633                         return -ENOBUFS;
1634                 }
1635
1636                 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1637                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1638                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1639                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1640
1641                 switch (flags){
1642                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1643                 case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
1644                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
1645                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1646                 default: new_line.clock_type = CLOCK_DEFAULT;
1647                 }
1648
1649                 new_line.clock_rate = info->params.clock_speed;
1650                 new_line.loopback   = info->params.loopback ? 1:0;
1651
1652                 if (copy_to_user(line, &new_line, size))
1653                         return -EFAULT;
1654                 return 0;
1655
1656         case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1657
1658                 if(!capable(CAP_NET_ADMIN))
1659                         return -EPERM;
1660                 if (copy_from_user(&new_line, line, size))
1661                         return -EFAULT;
1662
1663                 switch (new_line.clock_type)
1664                 {
1665                 case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1666                 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1667                 case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
1668                 case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
1669                 case CLOCK_DEFAULT:  flags = info->params.flags &
1670                                              (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1671                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1672                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1673                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
1674                 default: return -EINVAL;
1675                 }
1676
1677                 if (new_line.loopback != 0 && new_line.loopback != 1)
1678                         return -EINVAL;
1679
1680                 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1681                                         HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1682                                         HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1683                                         HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1684                 info->params.flags |= flags;
1685
1686                 info->params.loopback = new_line.loopback;
1687
1688                 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1689                         info->params.clock_speed = new_line.clock_rate;
1690                 else
1691                         info->params.clock_speed = 0;
1692
1693                 /* if network interface up, reprogram hardware */
1694                 if (info->netcount)
1695                         program_hw(info);
1696                 return 0;
1697
1698         default:
1699                 return hdlc_ioctl(dev, ifr, cmd);
1700         }
1701 }
1702
1703 /**
1704  * called by network layer when transmit timeout is detected
1705  *
1706  * dev  pointer to network device structure
1707  */
1708 static void hdlcdev_tx_timeout(struct net_device *dev)
1709 {
1710         struct slgt_info *info = dev_to_port(dev);
1711         unsigned long flags;
1712
1713         DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1714
1715         dev->stats.tx_errors++;
1716         dev->stats.tx_aborted_errors++;
1717
1718         spin_lock_irqsave(&info->lock,flags);
1719         tx_stop(info);
1720         spin_unlock_irqrestore(&info->lock,flags);
1721
1722         netif_wake_queue(dev);
1723 }
1724
1725 /**
1726  * called by device driver when transmit completes
1727  * reenable network layer transmit if stopped
1728  *
1729  * info  pointer to device instance information
1730  */
1731 static void hdlcdev_tx_done(struct slgt_info *info)
1732 {
1733         if (netif_queue_stopped(info->netdev))
1734                 netif_wake_queue(info->netdev);
1735 }
1736
1737 /**
1738  * called by device driver when frame received
1739  * pass frame to network layer
1740  *
1741  * info  pointer to device instance information
1742  * buf   pointer to buffer contianing frame data
1743  * size  count of data bytes in buf
1744  */
1745 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1746 {
1747         struct sk_buff *skb = dev_alloc_skb(size);
1748         struct net_device *dev = info->netdev;
1749
1750         DBGINFO(("%s hdlcdev_rx\n", dev->name));
1751
1752         if (skb == NULL) {
1753                 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1754                 dev->stats.rx_dropped++;
1755                 return;
1756         }
1757
1758         memcpy(skb_put(skb, size), buf, size);
1759
1760         skb->protocol = hdlc_type_trans(skb, dev);
1761
1762         dev->stats.rx_packets++;
1763         dev->stats.rx_bytes += size;
1764
1765         netif_rx(skb);
1766
1767         dev->last_rx = jiffies;
1768 }
1769
1770 /**
1771  * called by device driver when adding device instance
1772  * do generic HDLC initialization
1773  *
1774  * info  pointer to device instance information
1775  *
1776  * returns 0 if success, otherwise error code
1777  */
1778 static int hdlcdev_init(struct slgt_info *info)
1779 {
1780         int rc;
1781         struct net_device *dev;
1782         hdlc_device *hdlc;
1783
1784         /* allocate and initialize network and HDLC layer objects */
1785
1786         if (!(dev = alloc_hdlcdev(info))) {
1787                 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1788                 return -ENOMEM;
1789         }
1790
1791         /* for network layer reporting purposes only */
1792         dev->mem_start = info->phys_reg_addr;
1793         dev->mem_end   = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1794         dev->irq       = info->irq_level;
1795
1796         /* network layer callbacks and settings */
1797         dev->do_ioctl       = hdlcdev_ioctl;
1798         dev->open           = hdlcdev_open;
1799         dev->stop           = hdlcdev_close;
1800         dev->tx_timeout     = hdlcdev_tx_timeout;
1801         dev->watchdog_timeo = 10*HZ;
1802         dev->tx_queue_len   = 50;
1803
1804         /* generic HDLC layer callbacks and settings */
1805         hdlc         = dev_to_hdlc(dev);
1806         hdlc->attach = hdlcdev_attach;
1807         hdlc->xmit   = hdlcdev_xmit;
1808
1809         /* register objects with HDLC layer */
1810         if ((rc = register_hdlc_device(dev))) {
1811                 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1812                 free_netdev(dev);
1813                 return rc;
1814         }
1815
1816         info->netdev = dev;
1817         return 0;
1818 }
1819
1820 /**
1821  * called by device driver when removing device instance
1822  * do generic HDLC cleanup
1823  *
1824  * info  pointer to device instance information
1825  */
1826 static void hdlcdev_exit(struct slgt_info *info)
1827 {
1828         unregister_hdlc_device(info->netdev);
1829         free_netdev(info->netdev);
1830         info->netdev = NULL;
1831 }
1832
1833 #endif /* ifdef CONFIG_HDLC */
1834
1835 /*
1836  * get async data from rx DMA buffers
1837  */
1838 static void rx_async(struct slgt_info *info)
1839 {
1840         struct tty_struct *tty = info->port.tty;
1841         struct mgsl_icount *icount = &info->icount;
1842         unsigned int start, end;
1843         unsigned char *p;
1844         unsigned char status;
1845         struct slgt_desc *bufs = info->rbufs;
1846         int i, count;
1847         int chars = 0;
1848         int stat;
1849         unsigned char ch;
1850
1851         start = end = info->rbuf_current;
1852
1853         while(desc_complete(bufs[end])) {
1854                 count = desc_count(bufs[end]) - info->rbuf_index;
1855                 p     = bufs[end].buf + info->rbuf_index;
1856
1857                 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1858                 DBGDATA(info, p, count, "rx");
1859
1860                 for(i=0 ; i < count; i+=2, p+=2) {
1861                         ch = *p;
1862                         icount->rx++;
1863
1864                         stat = 0;
1865
1866                         if ((status = *(p+1) & (BIT1 + BIT0))) {
1867                                 if (status & BIT1)
1868                                         icount->parity++;
1869                                 else if (status & BIT0)
1870                                         icount->frame++;
1871                                 /* discard char if tty control flags say so */
1872                                 if (status & info->ignore_status_mask)
1873                                         continue;
1874                                 if (status & BIT1)
1875                                         stat = TTY_PARITY;
1876                                 else if (status & BIT0)
1877                                         stat = TTY_FRAME;
1878                         }
1879                         if (tty) {
1880                                 tty_insert_flip_char(tty, ch, stat);
1881                                 chars++;
1882                         }
1883                 }
1884
1885                 if (i < count) {
1886                         /* receive buffer not completed */
1887                         info->rbuf_index += i;
1888                         mod_timer(&info->rx_timer, jiffies + 1);
1889                         break;
1890                 }
1891
1892                 info->rbuf_index = 0;
1893                 free_rbufs(info, end, end);
1894
1895                 if (++end == info->rbuf_count)
1896                         end = 0;
1897
1898                 /* if entire list searched then no frame available */
1899                 if (end == start)
1900                         break;
1901         }
1902
1903         if (tty && chars)
1904                 tty_flip_buffer_push(tty);
1905 }
1906
1907 /*
1908  * return next bottom half action to perform
1909  */
1910 static int bh_action(struct slgt_info *info)
1911 {
1912         unsigned long flags;
1913         int rc;
1914
1915         spin_lock_irqsave(&info->lock,flags);
1916
1917         if (info->pending_bh & BH_RECEIVE) {
1918                 info->pending_bh &= ~BH_RECEIVE;
1919                 rc = BH_RECEIVE;
1920         } else if (info->pending_bh & BH_TRANSMIT) {
1921                 info->pending_bh &= ~BH_TRANSMIT;
1922                 rc = BH_TRANSMIT;
1923         } else if (info->pending_bh & BH_STATUS) {
1924                 info->pending_bh &= ~BH_STATUS;
1925                 rc = BH_STATUS;
1926         } else {
1927                 /* Mark BH routine as complete */
1928                 info->bh_running = false;
1929                 info->bh_requested = false;
1930                 rc = 0;
1931         }
1932
1933         spin_unlock_irqrestore(&info->lock,flags);
1934
1935         return rc;
1936 }
1937
1938 /*
1939  * perform bottom half processing
1940  */
1941 static void bh_handler(struct work_struct *work)
1942 {
1943         struct slgt_info *info = container_of(work, struct slgt_info, task);
1944         int action;
1945
1946         if (!info)
1947                 return;
1948         info->bh_running = true;
1949
1950         while((action = bh_action(info))) {
1951                 switch (action) {
1952                 case BH_RECEIVE:
1953                         DBGBH(("%s bh receive\n", info->device_name));
1954                         switch(info->params.mode) {
1955                         case MGSL_MODE_ASYNC:
1956                                 rx_async(info);
1957                                 break;
1958                         case MGSL_MODE_HDLC:
1959                                 while(rx_get_frame(info));
1960                                 break;
1961                         case MGSL_MODE_RAW:
1962                         case MGSL_MODE_MONOSYNC:
1963                         case MGSL_MODE_BISYNC:
1964                                 while(rx_get_buf(info));
1965                                 break;
1966                         }
1967                         /* restart receiver if rx DMA buffers exhausted */
1968                         if (info->rx_restart)
1969                                 rx_start(info);
1970                         break;
1971                 case BH_TRANSMIT:
1972                         bh_transmit(info);
1973                         break;
1974                 case BH_STATUS:
1975                         DBGBH(("%s bh status\n", info->device_name));
1976                         info->ri_chkcount = 0;
1977                         info->dsr_chkcount = 0;
1978                         info->dcd_chkcount = 0;
1979                         info->cts_chkcount = 0;
1980                         break;
1981                 default:
1982                         DBGBH(("%s unknown action\n", info->device_name));
1983                         break;
1984                 }
1985         }
1986         DBGBH(("%s bh_handler exit\n", info->device_name));
1987 }
1988
1989 static void bh_transmit(struct slgt_info *info)
1990 {
1991         struct tty_struct *tty = info->port.tty;
1992
1993         DBGBH(("%s bh_transmit\n", info->device_name));
1994         if (tty)
1995                 tty_wakeup(tty);
1996 }
1997
1998 static void dsr_change(struct slgt_info *info, unsigned short status)
1999 {
2000         if (status & BIT3) {
2001                 info->signals |= SerialSignal_DSR;
2002                 info->input_signal_events.dsr_up++;
2003         } else {
2004                 info->signals &= ~SerialSignal_DSR;
2005                 info->input_signal_events.dsr_down++;
2006         }
2007         DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
2008         if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2009                 slgt_irq_off(info, IRQ_DSR);
2010                 return;
2011         }
2012         info->icount.dsr++;
2013         wake_up_interruptible(&info->status_event_wait_q);
2014         wake_up_interruptible(&info->event_wait_q);
2015         info->pending_bh |= BH_STATUS;
2016 }
2017
2018 static void cts_change(struct slgt_info *info, unsigned short status)
2019 {
2020         if (status & BIT2) {
2021                 info->signals |= SerialSignal_CTS;
2022                 info->input_signal_events.cts_up++;
2023         } else {
2024                 info->signals &= ~SerialSignal_CTS;
2025                 info->input_signal_events.cts_down++;
2026         }
2027         DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
2028         if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2029                 slgt_irq_off(info, IRQ_CTS);
2030                 return;
2031         }
2032         info->icount.cts++;
2033         wake_up_interruptible(&info->status_event_wait_q);
2034         wake_up_interruptible(&info->event_wait_q);
2035         info->pending_bh |= BH_STATUS;
2036
2037         if (info->port.flags & ASYNC_CTS_FLOW) {
2038                 if (info->port.tty) {
2039                         if (info->port.tty->hw_stopped) {
2040                                 if (info->signals & SerialSignal_CTS) {
2041                                         info->port.tty->hw_stopped = 0;
2042                                         info->pending_bh |= BH_TRANSMIT;
2043                                         return;
2044                                 }
2045                         } else {
2046                                 if (!(info->signals & SerialSignal_CTS))
2047                                         info->port.tty->hw_stopped = 1;
2048                         }
2049                 }
2050         }
2051 }
2052
2053 static void dcd_change(struct slgt_info *info, unsigned short status)
2054 {
2055         if (status & BIT1) {
2056                 info->signals |= SerialSignal_DCD;
2057                 info->input_signal_events.dcd_up++;
2058         } else {
2059                 info->signals &= ~SerialSignal_DCD;
2060                 info->input_signal_events.dcd_down++;
2061         }
2062         DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
2063         if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2064                 slgt_irq_off(info, IRQ_DCD);
2065                 return;
2066         }
2067         info->icount.dcd++;
2068 #if SYNCLINK_GENERIC_HDLC
2069         if (info->netcount) {
2070                 if (info->signals & SerialSignal_DCD)
2071                         netif_carrier_on(info->netdev);
2072                 else
2073                         netif_carrier_off(info->netdev);
2074         }
2075 #endif
2076         wake_up_interruptible(&info->status_event_wait_q);
2077         wake_up_interruptible(&info->event_wait_q);
2078         info->pending_bh |= BH_STATUS;
2079
2080         if (info->port.flags & ASYNC_CHECK_CD) {
2081                 if (info->signals & SerialSignal_DCD)
2082                         wake_up_interruptible(&info->port.open_wait);
2083                 else {
2084                         if (info->port.tty)
2085                                 tty_hangup(info->port.tty);
2086                 }
2087         }
2088 }
2089
2090 static void ri_change(struct slgt_info *info, unsigned short status)
2091 {
2092         if (status & BIT0) {
2093                 info->signals |= SerialSignal_RI;
2094                 info->input_signal_events.ri_up++;
2095         } else {
2096                 info->signals &= ~SerialSignal_RI;
2097                 info->input_signal_events.ri_down++;
2098         }
2099         DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2100         if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2101                 slgt_irq_off(info, IRQ_RI);
2102                 return;
2103         }
2104         info->icount.rng++;
2105         wake_up_interruptible(&info->status_event_wait_q);
2106         wake_up_interruptible(&info->event_wait_q);
2107         info->pending_bh |= BH_STATUS;
2108 }
2109
2110 static void isr_serial(struct slgt_info *info)
2111 {
2112         unsigned short status = rd_reg16(info, SSR);
2113
2114         DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2115
2116         wr_reg16(info, SSR, status); /* clear pending */
2117
2118         info->irq_occurred = true;
2119
2120         if (info->params.mode == MGSL_MODE_ASYNC) {
2121                 if (status & IRQ_TXIDLE) {
2122                         if (info->tx_count)
2123                                 isr_txeom(info, status);
2124                 }
2125                 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2126                         info->icount.brk++;
2127                         /* process break detection if tty control allows */
2128                         if (info->port.tty) {
2129                                 if (!(status & info->ignore_status_mask)) {
2130                                         if (info->read_status_mask & MASK_BREAK) {
2131                                                 tty_insert_flip_char(info->port.tty, 0, TTY_BREAK);
2132                                                 if (info->port.flags & ASYNC_SAK)
2133                                                         do_SAK(info->port.tty);
2134                                         }
2135                                 }
2136                         }
2137                 }
2138         } else {
2139                 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2140                         isr_txeom(info, status);
2141
2142                 if (status & IRQ_RXIDLE) {
2143                         if (status & RXIDLE)
2144                                 info->icount.rxidle++;
2145                         else
2146                                 info->icount.exithunt++;
2147                         wake_up_interruptible(&info->event_wait_q);
2148                 }
2149
2150                 if (status & IRQ_RXOVER)
2151                         rx_start(info);
2152         }
2153
2154         if (status & IRQ_DSR)
2155                 dsr_change(info, status);
2156         if (status & IRQ_CTS)
2157                 cts_change(info, status);
2158         if (status & IRQ_DCD)
2159                 dcd_change(info, status);
2160         if (status & IRQ_RI)
2161                 ri_change(info, status);
2162 }
2163
2164 static void isr_rdma(struct slgt_info *info)
2165 {
2166         unsigned int status = rd_reg32(info, RDCSR);
2167
2168         DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2169
2170         /* RDCSR (rx DMA control/status)
2171          *
2172          * 31..07  reserved
2173          * 06      save status byte to DMA buffer
2174          * 05      error
2175          * 04      eol (end of list)
2176          * 03      eob (end of buffer)
2177          * 02      IRQ enable
2178          * 01      reset
2179          * 00      enable
2180          */
2181         wr_reg32(info, RDCSR, status);  /* clear pending */
2182
2183         if (status & (BIT5 + BIT4)) {
2184                 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2185                 info->rx_restart = true;
2186         }
2187         info->pending_bh |= BH_RECEIVE;
2188 }
2189
2190 static void isr_tdma(struct slgt_info *info)
2191 {
2192         unsigned int status = rd_reg32(info, TDCSR);
2193
2194         DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2195
2196         /* TDCSR (tx DMA control/status)
2197          *
2198          * 31..06  reserved
2199          * 05      error
2200          * 04      eol (end of list)
2201          * 03      eob (end of buffer)
2202          * 02      IRQ enable
2203          * 01      reset
2204          * 00      enable
2205          */
2206         wr_reg32(info, TDCSR, status);  /* clear pending */
2207
2208         if (status & (BIT5 + BIT4 + BIT3)) {
2209                 // another transmit buffer has completed
2210                 // run bottom half to get more send data from user
2211                 info->pending_bh |= BH_TRANSMIT;
2212         }
2213 }
2214
2215 static void isr_txeom(struct slgt_info *info, unsigned short status)
2216 {
2217         DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2218
2219         slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2220         tdma_reset(info);
2221         reset_tbufs(info);
2222         if (status & IRQ_TXUNDER) {
2223                 unsigned short val = rd_reg16(info, TCR);
2224                 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2225                 wr_reg16(info, TCR, val); /* clear reset bit */
2226         }
2227
2228         if (info->tx_active) {
2229                 if (info->params.mode != MGSL_MODE_ASYNC) {
2230                         if (status & IRQ_TXUNDER)
2231                                 info->icount.txunder++;
2232                         else if (status & IRQ_TXIDLE)
2233                                 info->icount.txok++;
2234                 }
2235
2236                 info->tx_active = false;
2237                 info->tx_count = 0;
2238
2239                 del_timer(&info->tx_timer);
2240
2241                 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2242                         info->signals &= ~SerialSignal_RTS;
2243                         info->drop_rts_on_tx_done = false;
2244                         set_signals(info);
2245                 }
2246
2247 #if SYNCLINK_GENERIC_HDLC
2248                 if (info->netcount)
2249                         hdlcdev_tx_done(info);
2250                 else
2251 #endif
2252                 {
2253                         if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2254                                 tx_stop(info);
2255                                 return;
2256                         }
2257                         info->pending_bh |= BH_TRANSMIT;
2258                 }
2259         }
2260 }
2261
2262 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2263 {
2264         struct cond_wait *w, *prev;
2265
2266         /* wake processes waiting for specific transitions */
2267         for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2268                 if (w->data & changed) {
2269                         w->data = state;
2270                         wake_up_interruptible(&w->q);
2271                         if (prev != NULL)
2272                                 prev->next = w->next;
2273                         else
2274                                 info->gpio_wait_q = w->next;
2275                 } else
2276                         prev = w;
2277         }
2278 }
2279
2280 /* interrupt service routine
2281  *
2282  *      irq     interrupt number
2283  *      dev_id  device ID supplied during interrupt registration
2284  */
2285 static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
2286 {
2287         struct slgt_info *info = dev_id;
2288         unsigned int gsr;
2289         unsigned int i;
2290
2291         DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
2292
2293         spin_lock(&info->lock);
2294
2295         while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2296                 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2297                 info->irq_occurred = true;
2298                 for(i=0; i < info->port_count ; i++) {
2299                         if (info->port_array[i] == NULL)
2300                                 continue;
2301                         if (gsr & (BIT8 << i))
2302                                 isr_serial(info->port_array[i]);
2303                         if (gsr & (BIT16 << (i*2)))
2304                                 isr_rdma(info->port_array[i]);
2305                         if (gsr & (BIT17 << (i*2)))
2306                                 isr_tdma(info->port_array[i]);
2307                 }
2308         }
2309
2310         if (info->gpio_present) {
2311                 unsigned int state;
2312                 unsigned int changed;
2313                 while ((changed = rd_reg32(info, IOSR)) != 0) {
2314                         DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2315                         /* read latched state of GPIO signals */
2316                         state = rd_reg32(info, IOVR);
2317                         /* clear pending GPIO interrupt bits */
2318                         wr_reg32(info, IOSR, changed);
2319                         for (i=0 ; i < info->port_count ; i++) {
2320                                 if (info->port_array[i] != NULL)
2321                                         isr_gpio(info->port_array[i], changed, state);
2322                         }
2323                 }
2324         }
2325
2326         for(i=0; i < info->port_count ; i++) {
2327                 struct slgt_info *port = info->port_array[i];
2328
2329                 if (port && (port->port.count || port->netcount) &&
2330                     port->pending_bh && !port->bh_running &&
2331                     !port->bh_requested) {
2332                         DBGISR(("%s bh queued\n", port->device_name));
2333                         schedule_work(&port->task);
2334                         port->bh_requested = true;
2335                 }
2336         }
2337
2338         spin_unlock(&info->lock);
2339
2340         DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
2341         return IRQ_HANDLED;
2342 }
2343
2344 static int startup(struct slgt_info *info)
2345 {
2346         DBGINFO(("%s startup\n", info->device_name));
2347
2348         if (info->port.flags & ASYNC_INITIALIZED)
2349                 return 0;
2350
2351         if (!info->tx_buf) {
2352                 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2353                 if (!info->tx_buf) {
2354                         DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2355                         return -ENOMEM;
2356                 }
2357         }
2358
2359         info->pending_bh = 0;
2360
2361         memset(&info->icount, 0, sizeof(info->icount));
2362
2363         /* program hardware for current parameters */
2364         change_params(info);
2365
2366         if (info->port.tty)
2367                 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2368
2369         info->port.flags |= ASYNC_INITIALIZED;
2370
2371         return 0;
2372 }
2373
2374 /*
2375  *  called by close() and hangup() to shutdown hardware
2376  */
2377 static void shutdown(struct slgt_info *info)
2378 {
2379         unsigned long flags;
2380
2381         if (!(info->port.flags & ASYNC_INITIALIZED))
2382                 return;
2383
2384         DBGINFO(("%s shutdown\n", info->device_name));
2385
2386         /* clear status wait queue because status changes */
2387         /* can't happen after shutting down the hardware */
2388         wake_up_interruptible(&info->status_event_wait_q);
2389         wake_up_interruptible(&info->event_wait_q);
2390
2391         del_timer_sync(&info->tx_timer);
2392         del_timer_sync(&info->rx_timer);
2393
2394         kfree(info->tx_buf);
2395         info->tx_buf = NULL;
2396
2397         spin_lock_irqsave(&info->lock,flags);
2398
2399         tx_stop(info);
2400         rx_stop(info);
2401
2402         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2403
2404         if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
2405                 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2406                 set_signals(info);
2407         }
2408
2409         flush_cond_wait(&info->gpio_wait_q);
2410
2411         spin_unlock_irqrestore(&info->lock,flags);
2412
2413         if (info->port.tty)
2414                 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2415
2416         info->port.flags &= ~ASYNC_INITIALIZED;
2417 }
2418
2419 static void program_hw(struct slgt_info *info)
2420 {
2421         unsigned long flags;
2422
2423         spin_lock_irqsave(&info->lock,flags);
2424
2425         rx_stop(info);
2426         tx_stop(info);
2427
2428         if (info->params.mode != MGSL_MODE_ASYNC ||
2429             info->netcount)
2430                 sync_mode(info);
2431         else
2432                 async_mode(info);
2433
2434         set_signals(info);
2435
2436         info->dcd_chkcount = 0;
2437         info->cts_chkcount = 0;
2438         info->ri_chkcount = 0;
2439         info->dsr_chkcount = 0;
2440
2441         slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
2442         get_signals(info);
2443
2444         if (info->netcount ||
2445             (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
2446                 rx_start(info);
2447
2448         spin_unlock_irqrestore(&info->lock,flags);
2449 }
2450
2451 /*
2452  * reconfigure adapter based on new parameters
2453  */
2454 static void change_params(struct slgt_info *info)
2455 {
2456         unsigned cflag;
2457         int bits_per_char;
2458
2459         if (!info->port.tty || !info->port.tty->termios)
2460                 return;
2461         DBGINFO(("%s change_params\n", info->device_name));
2462
2463         cflag = info->port.tty->termios->c_cflag;
2464
2465         /* if B0 rate (hangup) specified then negate DTR and RTS */
2466         /* otherwise assert DTR and RTS */
2467         if (cflag & CBAUD)
2468                 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
2469         else
2470                 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2471
2472         /* byte size and parity */
2473
2474         switch (cflag & CSIZE) {
2475         case CS5: info->params.data_bits = 5; break;
2476         case CS6: info->params.data_bits = 6; break;
2477         case CS7: info->params.data_bits = 7; break;
2478         case CS8: info->params.data_bits = 8; break;
2479         default:  info->params.data_bits = 7; break;
2480         }
2481
2482         info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2483
2484         if (cflag & PARENB)
2485                 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2486         else
2487                 info->params.parity = ASYNC_PARITY_NONE;
2488
2489         /* calculate number of jiffies to transmit a full
2490          * FIFO (32 bytes) at specified data rate
2491          */
2492         bits_per_char = info->params.data_bits +
2493                         info->params.stop_bits + 1;
2494
2495         info->params.data_rate = tty_get_baud_rate(info->port.tty);
2496
2497         if (info->params.data_rate) {
2498                 info->timeout = (32*HZ*bits_per_char) /
2499                                 info->params.data_rate;
2500         }
2501         info->timeout += HZ/50;         /* Add .02 seconds of slop */
2502
2503         if (cflag & CRTSCTS)
2504                 info->port.flags |= ASYNC_CTS_FLOW;
2505         else
2506                 info->port.flags &= ~ASYNC_CTS_FLOW;
2507
2508         if (cflag & CLOCAL)
2509                 info->port.flags &= ~ASYNC_CHECK_CD;
2510         else
2511                 info->port.flags |= ASYNC_CHECK_CD;
2512
2513         /* process tty input control flags */
2514
2515         info->read_status_mask = IRQ_RXOVER;
2516         if (I_INPCK(info->port.tty))
2517                 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2518         if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2519                 info->read_status_mask |= MASK_BREAK;
2520         if (I_IGNPAR(info->port.tty))
2521                 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2522         if (I_IGNBRK(info->port.tty)) {
2523                 info->ignore_status_mask |= MASK_BREAK;
2524                 /* If ignoring parity and break indicators, ignore
2525                  * overruns too.  (For real raw support).
2526                  */
2527                 if (I_IGNPAR(info->port.tty))
2528                         info->ignore_status_mask |= MASK_OVERRUN;
2529         }
2530
2531         program_hw(info);
2532 }
2533
2534 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2535 {
2536         DBGINFO(("%s get_stats\n",  info->device_name));
2537         if (!user_icount) {
2538                 memset(&info->icount, 0, sizeof(info->icount));
2539         } else {
2540                 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2541                         return -EFAULT;
2542         }
2543         return 0;
2544 }
2545
2546 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2547 {
2548         DBGINFO(("%s get_params\n", info->device_name));
2549         if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2550                 return -EFAULT;
2551         return 0;
2552 }
2553
2554 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2555 {
2556         unsigned long flags;
2557         MGSL_PARAMS tmp_params;
2558
2559         DBGINFO(("%s set_params\n", info->device_name));
2560         if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2561                 return -EFAULT;
2562
2563         spin_lock_irqsave(&info->lock, flags);
2564         memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2565         spin_unlock_irqrestore(&info->lock, flags);
2566
2567         change_params(info);
2568
2569         return 0;
2570 }
2571
2572 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2573 {
2574         DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2575         if (put_user(info->idle_mode, idle_mode))
2576                 return -EFAULT;
2577         return 0;
2578 }
2579
2580 static int set_txidle(struct slgt_info *info, int idle_mode)
2581 {
2582         unsigned long flags;
2583         DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2584         spin_lock_irqsave(&info->lock,flags);
2585         info->idle_mode = idle_mode;
2586         if (info->params.mode != MGSL_MODE_ASYNC)
2587                 tx_set_idle(info);
2588         spin_unlock_irqrestore(&info->lock,flags);
2589         return 0;
2590 }
2591
2592 static int tx_enable(struct slgt_info *info, int enable)
2593 {
2594         unsigned long flags;
2595         DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2596         spin_lock_irqsave(&info->lock,flags);
2597         if (enable) {
2598                 if (!info->tx_enabled)
2599                         tx_start(info);
2600         } else {
2601                 if (info->tx_enabled)
2602                         tx_stop(info);
2603         }
2604         spin_unlock_irqrestore(&info->lock,flags);
2605         return 0;
2606 }
2607
2608 /*
2609  * abort transmit HDLC frame
2610  */
2611 static int tx_abort(struct slgt_info *info)
2612 {
2613         unsigned long flags;
2614         DBGINFO(("%s tx_abort\n", info->device_name));
2615         spin_lock_irqsave(&info->lock,flags);
2616         tdma_reset(info);
2617         spin_unlock_irqrestore(&info->lock,flags);
2618         return 0;
2619 }
2620
2621 static int rx_enable(struct slgt_info *info, int enable)
2622 {
2623         unsigned long flags;
2624         unsigned int rbuf_fill_level;
2625         DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable));
2626         spin_lock_irqsave(&info->lock,flags);
2627         /*
2628          * enable[31..16] = receive DMA buffer fill level
2629          * 0 = noop (leave fill level unchanged)
2630          * fill level must be multiple of 4 and <= buffer size
2631          */
2632         rbuf_fill_level = ((unsigned int)enable) >> 16;
2633         if (rbuf_fill_level) {
2634                 if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) {
2635                         spin_unlock_irqrestore(&info->lock, flags);
2636                         return -EINVAL;
2637                 }
2638                 info->rbuf_fill_level = rbuf_fill_level;
2639                 rx_stop(info); /* restart receiver to use new fill level */
2640         }
2641
2642         /*
2643          * enable[1..0] = receiver enable command
2644          * 0 = disable
2645          * 1 = enable
2646          * 2 = enable or force hunt mode if already enabled
2647          */
2648         enable &= 3;
2649         if (enable) {
2650                 if (!info->rx_enabled)
2651                         rx_start(info);
2652                 else if (enable == 2) {
2653                         /* force hunt mode (write 1 to RCR[3]) */
2654                         wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
2655                 }
2656         } else {
2657                 if (info->rx_enabled)
2658                         rx_stop(info);
2659         }
2660         spin_unlock_irqrestore(&info->lock,flags);
2661         return 0;
2662 }
2663
2664 /*
2665  *  wait for specified event to occur
2666  */
2667 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2668 {
2669         unsigned long flags;
2670         int s;
2671         int rc=0;
2672         struct mgsl_icount cprev, cnow;
2673         int events;
2674         int mask;
2675         struct  _input_signal_events oldsigs, newsigs;
2676         DECLARE_WAITQUEUE(wait, current);
2677
2678         if (get_user(mask, mask_ptr))
2679                 return -EFAULT;
2680
2681         DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2682
2683         spin_lock_irqsave(&info->lock,flags);
2684
2685         /* return immediately if state matches requested events */
2686         get_signals(info);
2687         s = info->signals;
2688
2689         events = mask &
2690                 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2691                   ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2692                   ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2693                   ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2694         if (events) {
2695                 spin_unlock_irqrestore(&info->lock,flags);
2696                 goto exit;
2697         }
2698
2699         /* save current irq counts */
2700         cprev = info->icount;
2701         oldsigs = info->input_signal_events;
2702
2703         /* enable hunt and idle irqs if needed */
2704         if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2705                 unsigned short val = rd_reg16(info, SCR);
2706                 if (!(val & IRQ_RXIDLE))
2707                         wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2708         }
2709
2710         set_current_state(TASK_INTERRUPTIBLE);
2711         add_wait_queue(&info->event_wait_q, &wait);
2712
2713         spin_unlock_irqrestore(&info->lock,flags);
2714
2715         for(;;) {
2716                 schedule();
2717                 if (signal_pending(current)) {
2718                         rc = -ERESTARTSYS;
2719                         break;
2720                 }
2721
2722                 /* get current irq counts */
2723                 spin_lock_irqsave(&info->lock,flags);
2724                 cnow = info->icount;
2725                 newsigs = info->input_signal_events;
2726                 set_current_state(TASK_INTERRUPTIBLE);
2727                 spin_unlock_irqrestore(&info->lock,flags);
2728
2729                 /* if no change, wait aborted for some reason */
2730                 if (newsigs.dsr_up   == oldsigs.dsr_up   &&
2731                     newsigs.dsr_down == oldsigs.dsr_down &&
2732                     newsigs.dcd_up   == oldsigs.dcd_up   &&
2733                     newsigs.dcd_down == oldsigs.dcd_down &&
2734                     newsigs.cts_up   == oldsigs.cts_up   &&
2735                     newsigs.cts_down == oldsigs.cts_down &&
2736                     newsigs.ri_up    == oldsigs.ri_up    &&
2737                     newsigs.ri_down  == oldsigs.ri_down  &&
2738                     cnow.exithunt    == cprev.exithunt   &&
2739                     cnow.rxidle      == cprev.rxidle) {
2740                         rc = -EIO;
2741                         break;
2742                 }
2743
2744                 events = mask &
2745                         ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
2746                           (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2747                           (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
2748                           (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2749                           (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
2750                           (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2751                           (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
2752                           (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
2753                           (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
2754                           (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
2755                 if (events)
2756                         break;
2757
2758                 cprev = cnow;
2759                 oldsigs = newsigs;
2760         }
2761
2762         remove_wait_queue(&info->event_wait_q, &wait);
2763         set_current_state(TASK_RUNNING);
2764
2765
2766         if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2767                 spin_lock_irqsave(&info->lock,flags);
2768                 if (!waitqueue_active(&info->event_wait_q)) {
2769                         /* disable enable exit hunt mode/idle rcvd IRQs */
2770                         wr_reg16(info, SCR,
2771                                 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2772                 }
2773                 spin_unlock_irqrestore(&info->lock,flags);
2774         }
2775 exit:
2776         if (rc == 0)
2777                 rc = put_user(events, mask_ptr);
2778         return rc;
2779 }
2780
2781 static int get_interface(struct slgt_info *info, int __user *if_mode)
2782 {
2783         DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2784         if (put_user(info->if_mode, if_mode))
2785                 return -EFAULT;
2786         return 0;
2787 }
2788
2789 static int set_interface(struct slgt_info *info, int if_mode)
2790 {
2791         unsigned long flags;
2792         unsigned short val;
2793
2794         DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2795         spin_lock_irqsave(&info->lock,flags);
2796         info->if_mode = if_mode;
2797
2798         msc_set_vcr(info);
2799
2800         /* TCR (tx control) 07  1=RTS driver control */
2801         val = rd_reg16(info, TCR);
2802         if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2803                 val |= BIT7;
2804         else
2805                 val &= ~BIT7;
2806         wr_reg16(info, TCR, val);
2807
2808         spin_unlock_irqrestore(&info->lock,flags);
2809         return 0;
2810 }
2811
2812 /*
2813  * set general purpose IO pin state and direction
2814  *
2815  * user_gpio fields:
2816  * state   each bit indicates a pin state
2817  * smask   set bit indicates pin state to set
2818  * dir     each bit indicates a pin direction (0=input, 1=output)
2819  * dmask   set bit indicates pin direction to set
2820  */
2821 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2822 {
2823         unsigned long flags;
2824         struct gpio_desc gpio;
2825         __u32 data;
2826
2827         if (!info->gpio_present)
2828                 return -EINVAL;
2829         if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2830                 return -EFAULT;
2831         DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2832                  info->device_name, gpio.state, gpio.smask,
2833                  gpio.dir, gpio.dmask));
2834
2835         spin_lock_irqsave(&info->lock,flags);
2836         if (gpio.dmask) {
2837                 data = rd_reg32(info, IODR);
2838                 data |= gpio.dmask & gpio.dir;
2839                 data &= ~(gpio.dmask & ~gpio.dir);
2840                 wr_reg32(info, IODR, data);
2841         }
2842         if (gpio.smask) {
2843                 data = rd_reg32(info, IOVR);
2844                 data |= gpio.smask & gpio.state;
2845                 data &= ~(gpio.smask & ~gpio.state);
2846                 wr_reg32(info, IOVR, data);
2847         }
2848         spin_unlock_irqrestore(&info->lock,flags);
2849
2850         return 0;
2851 }
2852
2853 /*
2854  * get general purpose IO pin state and direction
2855  */
2856 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2857 {
2858         struct gpio_desc gpio;
2859         if (!info->gpio_present)
2860                 return -EINVAL;
2861         gpio.state = rd_reg32(info, IOVR);
2862         gpio.smask = 0xffffffff;
2863         gpio.dir   = rd_reg32(info, IODR);
2864         gpio.dmask = 0xffffffff;
2865         if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2866                 return -EFAULT;
2867         DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
2868                  info->device_name, gpio.state, gpio.dir));
2869         return 0;
2870 }
2871
2872 /*
2873  * conditional wait facility
2874  */
2875 static void init_cond_wait(struct cond_wait *w, unsigned int data)
2876 {
2877         init_waitqueue_head(&w->q);
2878         init_waitqueue_entry(&w->wait, current);
2879         w->data = data;
2880 }
2881
2882 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
2883 {
2884         set_current_state(TASK_INTERRUPTIBLE);
2885         add_wait_queue(&w->q, &w->wait);
2886         w->next = *head;
2887         *head = w;
2888 }
2889
2890 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
2891 {
2892         struct cond_wait *w, *prev;
2893         remove_wait_queue(&cw->q, &cw->wait);
2894         set_current_state(TASK_RUNNING);
2895         for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
2896                 if (w == cw) {
2897                         if (prev != NULL)
2898                                 prev->next = w->next;
2899                         else
2900                                 *head = w->next;
2901                         break;
2902                 }
2903         }
2904 }
2905
2906 static void flush_cond_wait(struct cond_wait **head)
2907 {
2908         while (*head != NULL) {
2909                 wake_up_interruptible(&(*head)->q);
2910                 *head = (*head)->next;
2911         }
2912 }
2913
2914 /*
2915  * wait for general purpose I/O pin(s) to enter specified state
2916  *
2917  * user_gpio fields:
2918  * state - bit indicates target pin state
2919  * smask - set bit indicates watched pin
2920  *
2921  * The wait ends when at least one watched pin enters the specified
2922  * state. When 0 (no error) is returned, user_gpio->state is set to the
2923  * state of all GPIO pins when the wait ends.
2924  *
2925  * Note: Each pin may be a dedicated input, dedicated output, or
2926  * configurable input/output. The number and configuration of pins
2927  * varies with the specific adapter model. Only input pins (dedicated
2928  * or configured) can be monitored with this function.
2929  */
2930 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2931 {
2932         unsigned long flags;
2933         int rc = 0;
2934         struct gpio_desc gpio;
2935         struct cond_wait wait;
2936         u32 state;
2937
2938         if (!info->gpio_present)
2939                 return -EINVAL;
2940         if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2941                 return -EFAULT;
2942         DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
2943                  info->device_name, gpio.state, gpio.smask));
2944         /* ignore output pins identified by set IODR bit */
2945         if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
2946                 return -EINVAL;
2947         init_cond_wait(&wait, gpio.smask);
2948
2949         spin_lock_irqsave(&info->lock, flags);
2950         /* enable interrupts for watched pins */
2951         wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
2952         /* get current pin states */
2953         state = rd_reg32(info, IOVR);
2954
2955         if (gpio.smask & ~(state ^ gpio.state)) {
2956                 /* already in target state */
2957                 gpio.state = state;
2958         } else {
2959                 /* wait for target state */
2960                 add_cond_wait(&info->gpio_wait_q, &wait);
2961                 spin_unlock_irqrestore(&info->lock, flags);
2962                 schedule();
2963                 if (signal_pending(current))
2964                         rc = -ERESTARTSYS;
2965                 else
2966                         gpio.state = wait.data;
2967                 spin_lock_irqsave(&info->lock, flags);
2968                 remove_cond_wait(&info->gpio_wait_q, &wait);
2969         }
2970
2971         /* disable all GPIO interrupts if no waiting processes */
2972         if (info->gpio_wait_q == NULL)
2973                 wr_reg32(info, IOER, 0);
2974         spin_unlock_irqrestore(&info->lock,flags);
2975
2976         if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2977                 rc = -EFAULT;
2978         return rc;
2979 }
2980
2981 static int modem_input_wait(struct slgt_info *info,int arg)
2982 {
2983         unsigned long flags;
2984         int rc;
2985         struct mgsl_icount cprev, cnow;
2986         DECLARE_WAITQUEUE(wait, current);
2987
2988         /* save current irq counts */
2989         spin_lock_irqsave(&info->lock,flags);
2990         cprev = info->icount;
2991         add_wait_queue(&info->status_event_wait_q, &wait);
2992         set_current_state(TASK_INTERRUPTIBLE);
2993         spin_unlock_irqrestore(&info->lock,flags);
2994
2995         for(;;) {
2996                 schedule();
2997                 if (signal_pending(current)) {
2998                         rc = -ERESTARTSYS;
2999                         break;
3000                 }
3001
3002                 /* get new irq counts */
3003                 spin_lock_irqsave(&info->lock,flags);
3004                 cnow = info->icount;
3005                 set_current_state(TASK_INTERRUPTIBLE);
3006                 spin_unlock_irqrestore(&info->lock,flags);
3007
3008                 /* if no change, wait aborted for some reason */
3009                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3010                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3011                         rc = -EIO;
3012                         break;
3013                 }
3014
3015                 /* check for change in caller specified modem input */
3016                 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3017                     (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3018                     (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
3019                     (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3020                         rc = 0;
3021                         break;
3022                 }
3023
3024                 cprev = cnow;
3025         }
3026         remove_wait_queue(&info->status_event_wait_q, &wait);
3027         set_current_state(TASK_RUNNING);
3028         return rc;
3029 }
3030
3031 /*
3032  *  return state of serial control and status signals
3033  */
3034 static int tiocmget(struct tty_struct *tty, struct file *file)
3035 {
3036         struct slgt_info *info = tty->driver_data;
3037         unsigned int result;
3038         unsigned long flags;
3039
3040         spin_lock_irqsave(&info->lock,flags);
3041         get_signals(info);
3042         spin_unlock_irqrestore(&info->lock,flags);
3043
3044         result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3045                 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3046                 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3047                 ((info->signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
3048                 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3049                 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3050
3051         DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
3052         return result;
3053 }
3054
3055 /*
3056  * set modem control signals (DTR/RTS)
3057  *
3058  *      cmd     signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
3059  *              TIOCMSET = set/clear signal values
3060  *      value   bit mask for command
3061  */
3062 static int tiocmset(struct tty_struct *tty, struct file *file,
3063                     unsigned int set, unsigned int clear)
3064 {
3065         struct slgt_info *info = tty->driver_data;
3066         unsigned long flags;
3067
3068         DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
3069
3070         if (set & TIOCM_RTS)
3071                 info->signals |= SerialSignal_RTS;
3072         if (set & TIOCM_DTR)
3073                 info->signals |= SerialSignal_DTR;
3074         if (clear & TIOCM_RTS)
3075                 info->signals &= ~SerialSignal_RTS;
3076         if (clear & TIOCM_DTR)
3077                 info->signals &= ~SerialSignal_DTR;
3078
3079         spin_lock_irqsave(&info->lock,flags);
3080         set_signals(info);
3081         spin_unlock_irqrestore(&info->lock,flags);
3082         return 0;
3083 }
3084
3085 static int carrier_raised(struct tty_port *port)
3086 {
3087         unsigned long flags;
3088         struct slgt_info *info = container_of(port, struct slgt_info, port);
3089
3090         spin_lock_irqsave(&info->lock,flags);
3091         get_signals(info);
3092         spin_unlock_irqrestore(&info->lock,flags);
3093         return (info->signals & SerialSignal_DCD) ? 1 : 0;
3094 }
3095
3096 static void raise_dtr_rts(struct tty_port *port)
3097 {
3098         unsigned long flags;
3099         struct slgt_info *info = container_of(port, struct slgt_info, port);
3100
3101         spin_lock_irqsave(&info->lock,flags);
3102         info->signals |= SerialSignal_RTS + SerialSignal_DTR;
3103         set_signals(info);
3104         spin_unlock_irqrestore(&info->lock,flags);
3105 }
3106
3107
3108 /*
3109  *  block current process until the device is ready to open
3110  */
3111 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3112                            struct slgt_info *info)
3113 {
3114         DECLARE_WAITQUEUE(wait, current);
3115         int             retval;
3116         bool            do_clocal = false;
3117         bool            extra_count = false;
3118         unsigned long   flags;
3119         int             cd;
3120         struct tty_port *port = &info->port;
3121
3122         DBGINFO(("%s block_til_ready\n", tty->driver->name));
3123
3124         if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3125                 /* nonblock mode is set or port is not enabled */
3126                 port->flags |= ASYNC_NORMAL_ACTIVE;
3127                 return 0;
3128         }
3129
3130         if (tty->termios->c_cflag & CLOCAL)
3131                 do_clocal = true;
3132
3133         /* Wait for carrier detect and the line to become
3134          * free (i.e., not in use by the callout).  While we are in
3135          * this loop, port->count is dropped by one, so that
3136          * close() knows when to free things.  We restore it upon
3137          * exit, either normal or abnormal.
3138          */
3139
3140         retval = 0;
3141         add_wait_queue(&port->open_wait, &wait);
3142
3143         spin_lock_irqsave(&info->lock, flags);
3144         if (!tty_hung_up_p(filp)) {
3145                 extra_count = true;
3146                 port->count--;
3147         }
3148         spin_unlock_irqrestore(&info->lock, flags);
3149         port->blocked_open++;
3150
3151         while (1) {
3152                 if ((tty->termios->c_cflag & CBAUD))
3153                         tty_port_raise_dtr_rts(port);
3154
3155                 set_current_state(TASK_INTERRUPTIBLE);
3156
3157                 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3158                         retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3159                                         -EAGAIN : -ERESTARTSYS;
3160                         break;
3161                 }
3162
3163                 cd = tty_port_carrier_raised(port);
3164
3165                 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
3166                         break;
3167
3168                 if (signal_pending(current)) {
3169                         retval = -ERESTARTSYS;
3170                         break;
3171                 }
3172
3173                 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3174                 schedule();
3175         }
3176
3177         set_current_state(TASK_RUNNING);
3178         remove_wait_queue(&port->open_wait, &wait);
3179
3180         if (extra_count)
3181                 port->count++;
3182         port->blocked_open--;
3183
3184         if (!retval)
3185                 port->flags |= ASYNC_NORMAL_ACTIVE;
3186
3187         DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3188         return retval;
3189 }
3190
3191 static int alloc_tmp_rbuf(struct slgt_info *info)
3192 {
3193         info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3194         if (info->tmp_rbuf == NULL)
3195                 return -ENOMEM;
3196         return 0;
3197 }
3198
3199 static void free_tmp_rbuf(struct slgt_info *info)
3200 {
3201         kfree(info->tmp_rbuf);
3202         info->tmp_rbuf = NULL;
3203 }
3204
3205 /*
3206  * allocate DMA descriptor lists.
3207  */
3208 static int alloc_desc(struct slgt_info *info)
3209 {
3210         unsigned int i;
3211         unsigned int pbufs;
3212
3213         /* allocate memory to hold descriptor lists */
3214         info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
3215         if (info->bufs == NULL)
3216                 return -ENOMEM;
3217
3218         memset(info->bufs, 0, DESC_LIST_SIZE);
3219
3220         info->rbufs = (struct slgt_desc*)info->bufs;
3221         info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3222
3223         pbufs = (unsigned int)info->bufs_dma_addr;
3224
3225         /*
3226          * Build circular lists of descriptors
3227          */
3228
3229         for (i=0; i < info->rbuf_count; i++) {
3230                 /* physical address of this descriptor */
3231                 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3232
3233                 /* physical address of next descriptor */
3234                 if (i == info->rbuf_count - 1)
3235                         info->rbufs[i].next = cpu_to_le32(pbufs);
3236                 else
3237                         info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3238                 set_desc_count(info->rbufs[i], DMABUFSIZE);
3239         }
3240
3241         for (i=0; i < info->tbuf_count; i++) {
3242                 /* physical address of this descriptor */
3243                 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3244
3245                 /* physical address of next descriptor */
3246                 if (i == info->tbuf_count - 1)
3247                         info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3248                 else
3249                         info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3250         }
3251
3252         return 0;
3253 }
3254
3255 static void free_desc(struct slgt_info *info)
3256 {
3257         if (info->bufs != NULL) {
3258                 pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
3259                 info->bufs  = NULL;
3260                 info->rbufs = NULL;
3261                 info->tbufs = NULL;
3262         }
3263 }
3264
3265 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3266 {
3267         int i;
3268         for (i=0; i < count; i++) {
3269                 if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
3270                         return -ENOMEM;
3271                 bufs[i].pbuf  = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3272         }
3273         return 0;
3274 }
3275
3276 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3277 {
3278         int i;
3279         for (i=0; i < count; i++) {
3280                 if (bufs[i].buf == NULL)
3281                         continue;
3282                 pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
3283                 bufs[i].buf = NULL;
3284         }
3285 }
3286
3287 static int alloc_dma_bufs(struct slgt_info *info)
3288 {
3289         info->rbuf_count = 32;
3290         info->tbuf_count = 32;
3291
3292         if (alloc_desc(info) < 0 ||
3293             alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3294             alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3295             alloc_tmp_rbuf(info) < 0) {
3296                 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3297                 return -ENOMEM;
3298         }
3299         reset_rbufs(info);
3300         return 0;
3301 }
3302
3303 static void free_dma_bufs(struct slgt_info *info)
3304 {
3305         if (info->bufs) {
3306                 free_bufs(info, info->rbufs, info->rbuf_count);
3307                 free_bufs(info, info->tbufs, info->tbuf_count);
3308                 free_desc(info);
3309         }
3310         free_tmp_rbuf(info);
3311 }
3312
3313 static int claim_resources(struct slgt_info *info)
3314 {
3315         if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3316                 DBGERR(("%s reg addr conflict, addr=%08X\n",
3317                         info->device_name, info->phys_reg_addr));
3318                 info->init_error = DiagStatus_AddressConflict;
3319                 goto errout;
3320         }
3321         else
3322                 info->reg_addr_requested = true;
3323
3324         info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
3325         if (!info->reg_addr) {
3326                 DBGERR(("%s cant map device registers, addr=%08X\n",
3327                         info->device_name, info->phys_reg_addr));
3328                 info->init_error = DiagStatus_CantAssignPciResources;
3329                 goto errout;
3330         }
3331         return 0;
3332
3333 errout:
3334         release_resources(info);
3335         return -ENODEV;
3336 }
3337
3338 static void release_resources(struct slgt_info *info)
3339 {
3340         if (info->irq_requested) {
3341                 free_irq(info->irq_level, info);
3342                 info->irq_requested = false;
3343         }
3344
3345         if (info->reg_addr_requested) {
3346                 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3347                 info->reg_addr_requested = false;
3348         }
3349
3350         if (info->reg_addr) {
3351                 iounmap(info->reg_addr);
3352                 info->reg_addr = NULL;
3353         }
3354 }
3355
3356 /* Add the specified device instance data structure to the
3357  * global linked list of devices and increment the device count.
3358  */
3359 static void add_device(struct slgt_info *info)
3360 {
3361         char *devstr;
3362
3363         info->next_device = NULL;
3364         info->line = slgt_device_count;
3365         sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3366
3367         if (info->line < MAX_DEVICES) {
3368                 if (maxframe[info->line])
3369                         info->max_frame_size = maxframe[info->line];
3370         }
3371
3372         slgt_device_count++;
3373
3374         if (!slgt_device_list)
3375                 slgt_device_list = info;
3376         else {
3377                 struct slgt_info *current_dev = slgt_device_list;
3378                 while(current_dev->next_device)
3379                         current_dev = current_dev->next_device;
3380                 current_dev->next_device = info;
3381         }
3382
3383         if (info->max_frame_size < 4096)
3384                 info->max_frame_size = 4096;
3385         else if (info->max_frame_size > 65535)
3386                 info->max_frame_size = 65535;
3387
3388         switch(info->pdev->device) {
3389         case SYNCLINK_GT_DEVICE_ID:
3390                 devstr = "GT";
3391                 break;
3392         case SYNCLINK_GT2_DEVICE_ID:
3393                 devstr = "GT2";
3394                 break;
3395         case SYNCLINK_GT4_DEVICE_ID:
3396                 devstr = "GT4";
3397                 break;
3398         case SYNCLINK_AC_DEVICE_ID:
3399                 devstr = "AC";
3400                 info->params.mode = MGSL_MODE_ASYNC;
3401                 break;
3402         default:
3403                 devstr = "(unknown model)";
3404         }
3405         printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3406                 devstr, info->device_name, info->phys_reg_addr,
3407                 info->irq_level, info->max_frame_size);
3408
3409 #if SYNCLINK_GENERIC_HDLC
3410         hdlcdev_init(info);
3411 #endif
3412 }
3413
3414 static const struct tty_port_operations slgt_port_ops = {
3415         .carrier_raised = carrier_raised,
3416         .raise_dtr_rts = raise_dtr_rts,
3417 };
3418
3419 /*
3420  *  allocate device instance structure, return NULL on failure
3421  */
3422 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3423 {
3424         struct slgt_info *info;
3425
3426         info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
3427
3428         if (!info) {
3429                 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3430                         driver_name, adapter_num, port_num));
3431         } else {
3432                 tty_port_init(&info->port);
3433                 info->port.ops = &slgt_port_ops;
3434                 info->magic = MGSL_MAGIC;
3435                 INIT_WORK(&info->task, bh_handler);
3436                 info->max_frame_size = 4096;
3437                 info->rbuf_fill_level = DMABUFSIZE;
3438                 info->port.close_delay = 5*HZ/10;
3439                 info->port.closing_wait = 30*HZ;
3440                 init_waitqueue_head(&info->status_event_wait_q);
3441                 init_waitqueue_head(&info->event_wait_q);
3442                 spin_lock_init(&info->netlock);
3443                 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3444                 info->idle_mode = HDLC_TXIDLE_FLAGS;
3445                 info->adapter_num = adapter_num;
3446                 info->port_num = port_num;
3447
3448                 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3449                 setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
3450
3451                 /* Copy configuration info to device instance data */
3452                 info->pdev = pdev;
3453                 info->irq_level = pdev->irq;
3454                 info->phys_reg_addr = pci_resource_start(pdev,0);
3455
3456                 info->bus_type = MGSL_BUS_TYPE_PCI;
3457                 info->irq_flags = IRQF_SHARED;
3458
3459                 info->init_error = -1; /* assume error, set to 0 on successful init */
3460         }
3461
3462         return info;
3463 }
3464
3465 static void device_init(int adapter_num, struct pci_dev *pdev)
3466 {
3467         struct slgt_info *port_array[SLGT_MAX_PORTS];
3468         int i;
3469         int port_count = 1;
3470
3471         if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3472                 port_count = 2;
3473         else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3474                 port_count = 4;
3475
3476         /* allocate device instances for all ports */
3477         for (i=0; i < port_count; ++i) {
3478                 port_array[i] = alloc_dev(adapter_num, i, pdev);
3479                 if (port_array[i] == NULL) {
3480                         for (--i; i >= 0; --i)
3481                                 kfree(port_array[i]);
3482                         return;
3483                 }
3484         }
3485
3486         /* give copy of port_array to all ports and add to device list  */
3487         for (i=0; i < port_count; ++i) {
3488                 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3489                 add_device(port_array[i]);
3490                 port_array[i]->port_count = port_count;
3491                 spin_lock_init(&port_array[i]->lock);
3492         }
3493
3494         /* Allocate and claim adapter resources */
3495         if (!claim_resources(port_array[0])) {
3496
3497                 alloc_dma_bufs(port_array[0]);
3498
3499                 /* copy resource information from first port to others */
3500                 for (i = 1; i < port_count; ++i) {
3501                         port_array[i]->lock      = port_array[0]->lock;
3502                         port_array[i]->irq_level = port_array[0]->irq_level;
3503                         port_array[i]->reg_addr  = port_array[0]->reg_addr;
3504                         alloc_dma_bufs(port_array[i]);
3505                 }
3506
3507                 if (request_irq(port_array[0]->irq_level,
3508                                         slgt_interrupt,
3509                                         port_array[0]->irq_flags,
3510                                         port_array[0]->device_name,
3511                                         port_array[0]) < 0) {
3512                         DBGERR(("%s request_irq failed IRQ=%d\n",
3513                                 port_array[0]->device_name,
3514                                 port_array[0]->irq_level));
3515                 } else {
3516                         port_array[0]->irq_requested = true;
3517                         adapter_test(port_array[0]);
3518                         for (i=1 ; i < port_count ; i++) {
3519                                 port_array[i]->init_error = port_array[0]->init_error;
3520                                 port_array[i]->gpio_present = port_array[0]->gpio_present;
3521                         }
3522                 }
3523         }
3524
3525         for (i=0; i < port_count; ++i)
3526                 tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
3527 }
3528
3529 static int __devinit init_one(struct pci_dev *dev,
3530                               const struct pci_device_id *ent)
3531 {
3532         if (pci_enable_device(dev)) {
3533                 printk("error enabling pci device %p\n", dev);
3534                 return -EIO;
3535         }
3536         pci_set_master(dev);
3537         device_init(slgt_device_count, dev);
3538         return 0;
3539 }
3540
3541 static void __devexit remove_one(struct pci_dev *dev)
3542 {
3543 }
3544
3545 static const struct tty_operations ops = {
3546         .open = open,
3547         .close = close,
3548         .write = write,
3549         .put_char = put_char,
3550         .flush_chars = flush_chars,
3551         .write_room = write_room,
3552         .chars_in_buffer = chars_in_buffer,
3553         .flush_buffer = flush_buffer,
3554         .ioctl = ioctl,
3555         .compat_ioctl = slgt_compat_ioctl,
3556         .throttle = throttle,
3557         .unthrottle = unthrottle,
3558         .send_xchar = send_xchar,
3559         .break_ctl = set_break,
3560         .wait_until_sent = wait_until_sent,
3561         .read_proc = read_proc,
3562         .set_termios = set_termios,
3563         .stop = tx_hold,
3564         .start = tx_release,
3565         .hangup = hangup,
3566         .tiocmget = tiocmget,
3567         .tiocmset = tiocmset,
3568 };
3569
3570 static void slgt_cleanup(void)
3571 {
3572         int rc;
3573         struct slgt_info *info;
3574         struct slgt_info *tmp;
3575
3576         printk(KERN_INFO "unload %s\n", driver_name);
3577
3578         if (serial_driver) {
3579                 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
3580                         tty_unregister_device(serial_driver, info->line);
3581                 if ((rc = tty_unregister_driver(serial_driver)))
3582                         DBGERR(("tty_unregister_driver error=%d\n", rc));
3583                 put_tty_driver(serial_driver);
3584         }
3585
3586         /* reset devices */
3587         info = slgt_device_list;
3588         while(info) {
3589                 reset_port(info);
3590                 info = info->next_device;
3591         }
3592
3593         /* release devices */
3594         info = slgt_device_list;
3595         while(info) {
3596 #if SYNCLINK_GENERIC_HDLC
3597                 hdlcdev_exit(info);
3598 #endif
3599                 free_dma_bufs(info);
3600                 free_tmp_rbuf(info);
3601                 if (info->port_num == 0)
3602                         release_resources(info);
3603                 tmp = info;
3604                 info = info->next_device;
3605                 kfree(tmp);
3606         }
3607
3608         if (pci_registered)
3609                 pci_unregister_driver(&pci_driver);
3610 }
3611
3612 /*
3613  *  Driver initialization entry point.
3614  */
3615 static int __init slgt_init(void)
3616 {
3617         int rc;
3618
3619         printk(KERN_INFO "%s\n", driver_name);
3620
3621         serial_driver = alloc_tty_driver(MAX_DEVICES);
3622         if (!serial_driver) {
3623                 printk("%s can't allocate tty driver\n", driver_name);
3624                 return -ENOMEM;
3625         }
3626
3627         /* Initialize the tty_driver structure */
3628
3629         serial_driver->owner = THIS_MODULE;
3630         serial_driver->driver_name = tty_driver_name;
3631         serial_driver->name = tty_dev_prefix;
3632         serial_driver->major = ttymajor;
3633         serial_driver->minor_start = 64;
3634         serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3635         serial_driver->subtype = SERIAL_TYPE_NORMAL;
3636         serial_driver->init_termios = tty_std_termios;
3637         serial_driver->init_termios.c_cflag =
3638                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3639         serial_driver->init_termios.c_ispeed = 9600;
3640         serial_driver->init_termios.c_ospeed = 9600;
3641         serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3642         tty_set_operations(serial_driver, &ops);
3643         if ((rc = tty_register_driver(serial_driver)) < 0) {
3644                 DBGERR(("%s can't register serial driver\n", driver_name));
3645                 put_tty_driver(serial_driver);
3646                 serial_driver = NULL;
3647                 goto error;
3648         }
3649
3650         printk(KERN_INFO "%s, tty major#%d\n",
3651                driver_name, serial_driver->major);
3652
3653         slgt_device_count = 0;
3654         if ((rc = pci_register_driver(&pci_driver)) < 0) {
3655                 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3656                 goto error;
3657         }
3658         pci_registered = true;
3659
3660         if (!slgt_device_list)
3661                 printk("%s no devices found\n",driver_name);
3662
3663         return 0;
3664
3665 error:
3666         slgt_cleanup();
3667         return rc;
3668 }
3669
3670 static void __exit slgt_exit(void)
3671 {
3672         slgt_cleanup();
3673 }
3674
3675 module_init(slgt_init);
3676 module_exit(slgt_exit);
3677
3678 /*
3679  * register access routines
3680  */
3681
3682 #define CALC_REGADDR() \
3683         unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3684         if (addr >= 0x80) \
3685                 reg_addr += (info->port_num) * 32;
3686
3687 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3688 {
3689         CALC_REGADDR();
3690         return readb((void __iomem *)reg_addr);
3691 }
3692
3693 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3694 {
3695         CALC_REGADDR();
3696         writeb(value, (void __iomem *)reg_addr);
3697 }
3698
3699 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3700 {
3701         CALC_REGADDR();
3702         return readw((void __iomem *)reg_addr);
3703 }
3704
3705 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3706 {
3707         CALC_REGADDR();
3708         writew(value, (void __iomem *)reg_addr);
3709 }
3710
3711 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3712 {
3713         CALC_REGADDR();
3714         return readl((void __iomem *)reg_addr);
3715 }
3716
3717 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3718 {
3719         CALC_REGADDR();
3720         writel(value, (void __iomem *)reg_addr);
3721 }
3722
3723 static void rdma_reset(struct slgt_info *info)
3724 {
3725         unsigned int i;
3726
3727         /* set reset bit */
3728         wr_reg32(info, RDCSR, BIT1);
3729
3730         /* wait for enable bit cleared */
3731         for(i=0 ; i < 1000 ; i++)
3732                 if (!(rd_reg32(info, RDCSR) & BIT0))
3733                         break;
3734 }
3735
3736 static void tdma_reset(struct slgt_info *info)
3737 {
3738         unsigned int i;
3739
3740         /* set reset bit */
3741         wr_reg32(info, TDCSR, BIT1);
3742
3743         /* wait for enable bit cleared */
3744         for(i=0 ; i < 1000 ; i++)
3745                 if (!(rd_reg32(info, TDCSR) & BIT0))
3746                         break;
3747 }
3748
3749 /*
3750  * enable internal loopback
3751  * TxCLK and RxCLK are generated from BRG
3752  * and TxD is looped back to RxD internally.
3753  */
3754 static void enable_loopback(struct slgt_info *info)
3755 {
3756         /* SCR (serial control) BIT2=looopback enable */
3757         wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3758
3759         if (info->params.mode != MGSL_MODE_ASYNC) {
3760                 /* CCR (clock control)
3761                  * 07..05  tx clock source (010 = BRG)
3762                  * 04..02  rx clock source (010 = BRG)
3763                  * 01      auxclk enable   (0 = disable)
3764                  * 00      BRG enable      (1 = enable)
3765                  *
3766                  * 0100 1001
3767                  */
3768                 wr_reg8(info, CCR, 0x49);
3769
3770                 /* set speed if available, otherwise use default */
3771                 if (info->params.clock_speed)
3772                         set_rate(info, info->params.clock_speed);
3773                 else
3774                         set_rate(info, 3686400);
3775         }
3776 }
3777
3778 /*
3779  *  set baud rate generator to specified rate
3780  */
3781 static void set_rate(struct slgt_info *info, u32 rate)
3782 {
3783         unsigned int div;
3784         static unsigned int osc = 14745600;
3785
3786         /* div = osc/rate - 1
3787          *
3788          * Round div up if osc/rate is not integer to
3789          * force to next slowest rate.
3790          */
3791
3792         if (rate) {
3793                 div = osc/rate;
3794                 if (!(osc % rate) && div)
3795                         div--;
3796                 wr_reg16(info, BDR, (unsigned short)div);
3797         }
3798 }
3799
3800 static void rx_stop(struct slgt_info *info)
3801 {
3802         unsigned short val;
3803
3804         /* disable and reset receiver */
3805         val = rd_reg16(info, RCR) & ~BIT1;          /* clear enable bit */
3806         wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3807         wr_reg16(info, RCR, val);                  /* clear reset bit */
3808
3809         slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3810
3811         /* clear pending rx interrupts */
3812         wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3813
3814         rdma_reset(info);
3815
3816         info->rx_enabled = false;
3817         info->rx_restart = false;
3818 }
3819
3820 static void rx_start(struct slgt_info *info)
3821 {
3822         unsigned short val;
3823
3824         slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3825
3826         /* clear pending rx overrun IRQ */
3827         wr_reg16(info, SSR, IRQ_RXOVER);
3828
3829         /* reset and disable receiver */
3830         val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3831         wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3832         wr_reg16(info, RCR, val);                  /* clear reset bit */
3833
3834         rdma_reset(info);
3835         reset_rbufs(info);
3836
3837         /* set 1st descriptor address */
3838         wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
3839
3840         if (info->params.mode != MGSL_MODE_ASYNC) {
3841                 /* enable rx DMA and DMA interrupt */
3842                 wr_reg32(info, RDCSR, (BIT2 + BIT0));
3843         } else {
3844                 /* enable saving of rx status, rx DMA and DMA interrupt */
3845                 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
3846         }
3847
3848         slgt_irq_on(info, IRQ_RXOVER);
3849
3850         /* enable receiver */
3851         wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
3852
3853         info->rx_restart = false;
3854         info->rx_enabled = true;
3855 }
3856
3857 static void tx_start(struct slgt_info *info)
3858 {
3859         if (!info->tx_enabled) {
3860                 wr_reg16(info, TCR,
3861                          (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
3862                 info->tx_enabled = true;
3863         }
3864
3865         if (info->tx_count) {
3866                 info->drop_rts_on_tx_done = false;
3867
3868                 if (info->params.mode != MGSL_MODE_ASYNC) {
3869                         if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3870                                 get_signals(info);
3871                                 if (!(info->signals & SerialSignal_RTS)) {
3872                                         info->signals |= SerialSignal_RTS;
3873                                         set_signals(info);
3874                                         info->drop_rts_on_tx_done = true;
3875                                 }
3876                         }
3877
3878                         slgt_irq_off(info, IRQ_TXDATA);
3879                         slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
3880                         /* clear tx idle and underrun status bits */
3881                         wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3882                         if (info->params.mode == MGSL_MODE_HDLC)
3883                                 mod_timer(&info->tx_timer, jiffies +
3884                                                 msecs_to_jiffies(5000));
3885                 } else {
3886                         slgt_irq_off(info, IRQ_TXDATA);
3887                         slgt_irq_on(info, IRQ_TXIDLE);
3888                         /* clear tx idle status bit */
3889                         wr_reg16(info, SSR, IRQ_TXIDLE);
3890                 }
3891                 tdma_start(info);
3892                 info->tx_active = true;
3893         }
3894 }
3895
3896 /*
3897  * start transmit DMA if inactive and there are unsent buffers
3898  */
3899 static void tdma_start(struct slgt_info *info)
3900 {
3901         unsigned int i;
3902
3903         if (rd_reg32(info, TDCSR) & BIT0)
3904                 return;
3905
3906         /* transmit DMA inactive, check for unsent buffers */
3907         i = info->tbuf_start;
3908         while (!desc_count(info->tbufs[i])) {
3909                 if (++i == info->tbuf_count)
3910                         i = 0;
3911                 if (i == info->tbuf_current)
3912                         return;
3913         }
3914         info->tbuf_start = i;
3915
3916         /* there are unsent buffers, start transmit DMA */
3917
3918         /* reset needed if previous error condition */
3919         tdma_reset(info);
3920
3921         /* set 1st descriptor address */
3922         wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
3923         wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
3924 }
3925
3926 static void tx_stop(struct slgt_info *info)
3927 {
3928         unsigned short val;
3929
3930         del_timer(&info->tx_timer);
3931
3932         tdma_reset(info);
3933
3934         /* reset and disable transmitter */
3935         val = rd_reg16(info, TCR) & ~BIT1;          /* clear enable bit */
3936         wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
3937
3938         slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
3939
3940         /* clear tx idle and underrun status bit */
3941         wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3942
3943         reset_tbufs(info);
3944
3945         info->tx_enabled = false;
3946         info->tx_active = false;
3947 }
3948
3949 static void reset_port(struct slgt_info *info)
3950 {
3951         if (!info->reg_addr)
3952                 return;
3953
3954         tx_stop(info);
3955         rx_stop(info);
3956
3957         info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
3958         set_signals(info);
3959
3960         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3961 }
3962
3963 static void reset_adapter(struct slgt_info *info)
3964 {
3965         int i;
3966         for (i=0; i < info->port_count; ++i) {
3967                 if (info->port_array[i])
3968                         reset_port(info->port_array[i]);
3969         }
3970 }
3971
3972 static void async_mode(struct slgt_info *info)
3973 {
3974         unsigned short val;
3975
3976         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3977         tx_stop(info);
3978         rx_stop(info);
3979
3980         /* TCR (tx control)
3981          *
3982          * 15..13  mode, 010=async
3983          * 12..10  encoding, 000=NRZ
3984          * 09      parity enable
3985          * 08      1=odd parity, 0=even parity
3986          * 07      1=RTS driver control
3987          * 06      1=break enable
3988          * 05..04  character length
3989          *         00=5 bits
3990          *         01=6 bits
3991          *         10=7 bits
3992          *         11=8 bits
3993          * 03      0=1 stop bit, 1=2 stop bits
3994          * 02      reset
3995          * 01      enable
3996          * 00      auto-CTS enable
3997          */
3998         val = 0x4000;
3999
4000         if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4001                 val |= BIT7;
4002
4003         if (info->params.parity != ASYNC_PARITY_NONE) {
4004                 val |= BIT9;
4005                 if (info->params.parity == ASYNC_PARITY_ODD)
4006                         val |= BIT8;
4007         }
4008
4009         switch (info->params.data_bits)
4010         {
4011         case 6: val |= BIT4; break;
4012         case 7: val |= BIT5; break;
4013         case 8: val |= BIT5 + BIT4; break;
4014         }
4015
4016         if (info->params.stop_bits != 1)
4017                 val |= BIT3;
4018
4019         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4020                 val |= BIT0;
4021
4022         wr_reg16(info, TCR, val);
4023
4024         /* RCR (rx control)
4025          *
4026          * 15..13  mode, 010=async
4027          * 12..10  encoding, 000=NRZ
4028          * 09      parity enable
4029          * 08      1=odd parity, 0=even parity
4030          * 07..06  reserved, must be 0
4031          * 05..04  character length
4032          *         00=5 bits
4033          *         01=6 bits
4034          *         10=7 bits
4035          *         11=8 bits
4036          * 03      reserved, must be zero
4037          * 02      reset
4038          * 01      enable
4039          * 00      auto-DCD enable
4040          */
4041         val = 0x4000;
4042
4043         if (info->params.parity != ASYNC_PARITY_NONE) {
4044                 val |= BIT9;
4045                 if (info->params.parity == ASYNC_PARITY_ODD)
4046                         val |= BIT8;
4047         }
4048
4049         switch (info->params.data_bits)
4050         {
4051         case 6: val |= BIT4; break;
4052         case 7: val |= BIT5; break;
4053         case 8: val |= BIT5 + BIT4; break;
4054         }
4055
4056         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4057                 val |= BIT0;
4058
4059         wr_reg16(info, RCR, val);
4060
4061         /* CCR (clock control)
4062          *
4063          * 07..05  011 = tx clock source is BRG/16
4064          * 04..02  010 = rx clock source is BRG
4065          * 01      0 = auxclk disabled
4066          * 00      1 = BRG enabled
4067          *
4068          * 0110 1001
4069          */
4070         wr_reg8(info, CCR, 0x69);
4071
4072         msc_set_vcr(info);
4073
4074         /* SCR (serial control)
4075          *
4076          * 15  1=tx req on FIFO half empty
4077          * 14  1=rx req on FIFO half full
4078          * 13  tx data  IRQ enable
4079          * 12  tx idle  IRQ enable
4080          * 11  rx break on IRQ enable
4081          * 10  rx data  IRQ enable
4082          * 09  rx break off IRQ enable
4083          * 08  overrun  IRQ enable
4084          * 07  DSR      IRQ enable
4085          * 06  CTS      IRQ enable
4086          * 05  DCD      IRQ enable
4087          * 04  RI       IRQ enable
4088          * 03  reserved, must be zero
4089          * 02  1=txd->rxd internal loopback enable
4090          * 01  reserved, must be zero
4091          * 00  1=master IRQ enable
4092          */
4093         val = BIT15 + BIT14 + BIT0;
4094         wr_reg16(info, SCR, val);
4095
4096         slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
4097
4098         set_rate(info, info->params.data_rate * 16);
4099
4100         if (info->params.loopback)
4101                 enable_loopback(info);
4102 }
4103
4104 static void sync_mode(struct slgt_info *info)
4105 {
4106         unsigned short val;
4107
4108         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4109         tx_stop(info);
4110         rx_stop(info);
4111
4112         /* TCR (tx control)
4113          *
4114          * 15..13  mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4115          * 12..10  encoding
4116          * 09      CRC enable
4117          * 08      CRC32
4118          * 07      1=RTS driver control
4119          * 06      preamble enable
4120          * 05..04  preamble length
4121          * 03      share open/close flag
4122          * 02      reset
4123          * 01      enable
4124          * 00      auto-CTS enable
4125          */
4126         val = BIT2;
4127
4128         switch(info->params.mode) {
4129         case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4130         case MGSL_MODE_BISYNC:   val |= BIT15; break;
4131         case MGSL_MODE_RAW:      val |= BIT13; break;
4132         }
4133         if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4134                 val |= BIT7;
4135
4136         switch(info->params.encoding)
4137         {
4138         case HDLC_ENCODING_NRZB:          val |= BIT10; break;
4139         case HDLC_ENCODING_NRZI_MARK:     val |= BIT11; break;
4140         case HDLC_ENCODING_NRZI:          val |= BIT11 + BIT10; break;
4141         case HDLC_ENCODING_BIPHASE_MARK:  val |= BIT12; break;
4142         case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4143         case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4144         case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4145         }
4146
4147         switch (info->params.crc_type & HDLC_CRC_MASK)
4148         {
4149         case HDLC_CRC_16_CCITT: val |= BIT9; break;
4150         case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4151         }
4152
4153         if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4154                 val |= BIT6;
4155
4156         switch (info->params.preamble_length)
4157         {
4158         case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4159         case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4160         case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4161         }
4162
4163         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4164                 val |= BIT0;
4165
4166         wr_reg16(info, TCR, val);
4167
4168         /* TPR (transmit preamble) */
4169
4170         switch (info->params.preamble)
4171         {
4172         case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4173         case HDLC_PREAMBLE_PATTERN_ONES:  val = 0xff; break;
4174         case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4175         case HDLC_PREAMBLE_PATTERN_10:    val = 0x55; break;
4176         case HDLC_PREAMBLE_PATTERN_01:    val = 0xaa; break;
4177         default:                          val = 0x7e; break;
4178         }
4179         wr_reg8(info, TPR, (unsigned char)val);
4180
4181         /* RCR (rx control)
4182          *
4183          * 15..13  mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4184          * 12..10  encoding
4185          * 09      CRC enable
4186          * 08      CRC32
4187          * 07..03  reserved, must be 0
4188          * 02      reset
4189          * 01      enable
4190          * 00      auto-DCD enable
4191          */
4192         val = 0;
4193
4194         switch(info->params.mode) {
4195         case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4196         case MGSL_MODE_BISYNC:   val |= BIT15; break;
4197         case MGSL_MODE_RAW:      val |= BIT13; break;
4198         }
4199
4200         switch(info->params.encoding)
4201         {
4202         case HDLC_ENCODING_NRZB:          val |= BIT10; break;
4203         case HDLC_ENCODING_NRZI_MARK:     val |= BIT11; break;
4204         case HDLC_ENCODING_NRZI:          val |= BIT11 + BIT10; break;
4205         case HDLC_ENCODING_BIPHASE_MARK:  val |= BIT12; break;
4206         case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4207         case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4208         case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4209         }
4210
4211         switch (info->params.crc_type & HDLC_CRC_MASK)
4212         {
4213         case HDLC_CRC_16_CCITT: val |= BIT9; break;
4214         case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4215         }
4216
4217         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4218                 val |= BIT0;
4219
4220         wr_reg16(info, RCR, val);
4221
4222         /* CCR (clock control)
4223          *
4224          * 07..05  tx clock source
4225          * 04..02  rx clock source
4226          * 01      auxclk enable
4227          * 00      BRG enable
4228          */
4229         val = 0;
4230
4231         if (info->params.flags & HDLC_FLAG_TXC_BRG)
4232         {
4233                 // when RxC source is DPLL, BRG generates 16X DPLL
4234                 // reference clock, so take TxC from BRG/16 to get
4235                 // transmit clock at actual data rate
4236                 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4237                         val |= BIT6 + BIT5;     /* 011, txclk = BRG/16 */
4238                 else
4239                         val |= BIT6;    /* 010, txclk = BRG */
4240         }
4241         else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4242                 val |= BIT7;    /* 100, txclk = DPLL Input */
4243         else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4244                 val |= BIT5;    /* 001, txclk = RXC Input */
4245
4246         if (info->params.flags & HDLC_FLAG_RXC_BRG)
4247                 val |= BIT3;    /* 010, rxclk = BRG */
4248         else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4249                 val |= BIT4;    /* 100, rxclk = DPLL */
4250         else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4251                 val |= BIT2;    /* 001, rxclk = TXC Input */
4252
4253         if (info->params.clock_speed)
4254                 val |= BIT1 + BIT0;
4255
4256         wr_reg8(info, CCR, (unsigned char)val);
4257
4258         if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4259         {
4260                 // program DPLL mode
4261                 switch(info->params.encoding)
4262                 {
4263                 case HDLC_ENCODING_BIPHASE_MARK:
4264                 case HDLC_ENCODING_BIPHASE_SPACE:
4265                         val = BIT7; break;
4266                 case HDLC_ENCODING_BIPHASE_LEVEL:
4267                 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4268                         val = BIT7 + BIT6; break;
4269                 default: val = BIT6;    // NRZ encodings
4270                 }
4271                 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4272
4273                 // DPLL requires a 16X reference clock from BRG
4274                 set_rate(info, info->params.clock_speed * 16);
4275         }
4276         else
4277                 set_rate(info, info->params.clock_speed);
4278
4279         tx_set_idle(info);
4280
4281         msc_set_vcr(info);
4282
4283         /* SCR (serial control)
4284          *
4285          * 15  1=tx req on FIFO half empty
4286          * 14  1=rx req on FIFO half full
4287          * 13  tx data  IRQ enable
4288          * 12  tx idle  IRQ enable
4289          * 11  underrun IRQ enable
4290          * 10  rx data  IRQ enable
4291          * 09  rx idle  IRQ enable
4292          * 08  overrun  IRQ enable
4293          * 07  DSR      IRQ enable
4294          * 06  CTS      IRQ enable
4295          * 05  DCD      IRQ enable
4296          * 04  RI       IRQ enable
4297          * 03  reserved, must be zero
4298          * 02  1=txd->rxd internal loopback enable
4299          * 01  reserved, must be zero
4300          * 00  1=master IRQ enable
4301          */
4302         wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4303
4304         if (info->params.loopback)
4305                 enable_loopback(info);
4306 }
4307
4308 /*
4309  *  set transmit idle mode
4310  */
4311 static void tx_set_idle(struct slgt_info *info)
4312 {
4313         unsigned char val;
4314         unsigned short tcr;
4315
4316         /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4317          * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4318          */
4319         tcr = rd_reg16(info, TCR);
4320         if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4321                 /* disable preamble, set idle size to 16 bits */
4322                 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4323                 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4324                 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4325         } else if (!(tcr & BIT6)) {
4326                 /* preamble is disabled, set idle size to 8 bits */
4327                 tcr &= ~(BIT5 + BIT4);
4328         }
4329         wr_reg16(info, TCR, tcr);
4330
4331         if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4332                 /* LSB of custom tx idle specified in tx idle register */
4333                 val = (unsigned char)(info->idle_mode & 0xff);
4334         } else {
4335                 /* standard 8 bit idle patterns */
4336                 switch(info->idle_mode)
4337                 {
4338                 case HDLC_TXIDLE_FLAGS:          val = 0x7e; break;
4339                 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4340                 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4341                 case HDLC_TXIDLE_ZEROS:
4342                 case HDLC_TXIDLE_SPACE:          val = 0x00; break;
4343                 default:                         val = 0xff;
4344                 }
4345         }
4346
4347         wr_reg8(info, TIR, val);
4348 }
4349
4350 /*
4351  * get state of V24 status (input) signals
4352  */
4353 static void get_signals(struct slgt_info *info)
4354 {
4355         unsigned short status = rd_reg16(info, SSR);
4356
4357         /* clear all serial signals except DTR and RTS */
4358         info->signals &= SerialSignal_DTR + SerialSignal_RTS;
4359
4360         if (status & BIT3)
4361                 info->signals |= SerialSignal_DSR;
4362         if (status & BIT2)
4363                 info->signals |= SerialSignal_CTS;
4364         if (status & BIT1)
4365                 info->signals |= SerialSignal_DCD;
4366         if (status & BIT0)
4367                 info->signals |= SerialSignal_RI;
4368 }
4369
4370 /*
4371  * set V.24 Control Register based on current configuration
4372  */
4373 static void msc_set_vcr(struct slgt_info *info)
4374 {
4375         unsigned char val = 0;
4376
4377         /* VCR (V.24 control)
4378          *
4379          * 07..04  serial IF select
4380          * 03      DTR
4381          * 02      RTS
4382          * 01      LL
4383          * 00      RL
4384          */
4385
4386         switch(info->if_mode & MGSL_INTERFACE_MASK)
4387         {
4388         case MGSL_INTERFACE_RS232:
4389                 val |= BIT5; /* 0010 */
4390                 break;
4391         case MGSL_INTERFACE_V35:
4392                 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4393                 break;
4394         case MGSL_INTERFACE_RS422:
4395                 val |= BIT6; /* 0100 */
4396                 break;
4397         }
4398
4399         if (info->if_mode & MGSL_INTERFACE_MSB_FIRST)
4400                 val |= BIT4;
4401         if (info->signals & SerialSignal_DTR)
4402                 val |= BIT3;
4403         if (info->signals & SerialSignal_RTS)
4404                 val |= BIT2;
4405         if (info->if_mode & MGSL_INTERFACE_LL)
4406                 val |= BIT1;
4407         if (info->if_mode & MGSL_INTERFACE_RL)
4408                 val |= BIT0;
4409         wr_reg8(info, VCR, val);
4410 }
4411
4412 /*
4413  * set state of V24 control (output) signals
4414  */
4415 static void set_signals(struct slgt_info *info)
4416 {
4417         unsigned char val = rd_reg8(info, VCR);
4418         if (info->signals & SerialSignal_DTR)
4419                 val |= BIT3;
4420         else
4421                 val &= ~BIT3;
4422         if (info->signals & SerialSignal_RTS)
4423                 val |= BIT2;
4424         else
4425                 val &= ~BIT2;
4426         wr_reg8(info, VCR, val);
4427 }
4428
4429 /*
4430  * free range of receive DMA buffers (i to last)
4431  */
4432 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4433 {
4434         int done = 0;
4435
4436         while(!done) {
4437                 /* reset current buffer for reuse */
4438                 info->rbufs[i].status = 0;
4439                 set_desc_count(info->rbufs[i], info->rbuf_fill_level);
4440                 if (i == last)
4441                         done = 1;
4442                 if (++i == info->rbuf_count)
4443                         i = 0;
4444         }
4445         info->rbuf_current = i;
4446 }
4447
4448 /*
4449  * mark all receive DMA buffers as free
4450  */
4451 static void reset_rbufs(struct slgt_info *info)
4452 {
4453         free_rbufs(info, 0, info->rbuf_count - 1);
4454 }
4455
4456 /*
4457  * pass receive HDLC frame to upper layer
4458  *
4459  * return true if frame available, otherwise false
4460  */
4461 static bool rx_get_frame(struct slgt_info *info)
4462 {
4463         unsigned int start, end;
4464         unsigned short status;
4465         unsigned int framesize = 0;
4466         unsigned long flags;
4467         struct tty_struct *tty = info->port.tty;
4468         unsigned char addr_field = 0xff;
4469         unsigned int crc_size = 0;
4470
4471         switch (info->params.crc_type & HDLC_CRC_MASK) {
4472         case HDLC_CRC_16_CCITT: crc_size = 2; break;
4473         case HDLC_CRC_32_CCITT: crc_size = 4; break;
4474         }
4475
4476 check_again:
4477
4478         framesize = 0;
4479         addr_field = 0xff;
4480         start = end = info->rbuf_current;
4481
4482         for (;;) {
4483                 if (!desc_complete(info->rbufs[end]))
4484                         goto cleanup;
4485
4486                 if (framesize == 0 && info->params.addr_filter != 0xff)
4487                         addr_field = info->rbufs[end].buf[0];
4488
4489                 framesize += desc_count(info->rbufs[end]);
4490
4491                 if (desc_eof(info->rbufs[end]))
4492                         break;
4493
4494                 if (++end == info->rbuf_count)
4495                         end = 0;
4496
4497                 if (end == info->rbuf_current) {
4498                         if (info->rx_enabled){
4499                                 spin_lock_irqsave(&info->lock,flags);
4500                                 rx_start(info);
4501                                 spin_unlock_irqrestore(&info->lock,flags);
4502                         }
4503                         goto cleanup;
4504                 }
4505         }
4506
4507         /* status
4508          *
4509          * 15      buffer complete
4510          * 14..06  reserved
4511          * 05..04  residue
4512          * 02      eof (end of frame)
4513          * 01      CRC error
4514          * 00      abort
4515          */
4516         status = desc_status(info->rbufs[end]);
4517
4518         /* ignore CRC bit if not using CRC (bit is undefined) */
4519         if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4520                 status &= ~BIT1;
4521
4522         if (framesize == 0 ||
4523                  (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4524                 free_rbufs(info, start, end);
4525                 goto check_again;
4526         }
4527
4528         if (framesize < (2 + crc_size) || status & BIT0) {
4529                 info->icount.rxshort++;
4530                 framesize = 0;
4531         } else if (status & BIT1) {
4532                 info->icount.rxcrc++;
4533                 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4534                         framesize = 0;
4535         }
4536
4537 #if SYNCLINK_GENERIC_HDLC
4538         if (framesize == 0) {
4539                 info->netdev->stats.rx_errors++;
4540                 info->netdev->stats.rx_frame_errors++;
4541         }
4542 #endif
4543
4544         DBGBH(("%s rx frame status=%04X size=%d\n",
4545                 info->device_name, status, framesize));
4546         DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx");
4547
4548         if (framesize) {
4549                 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4550                         framesize -= crc_size;
4551                         crc_size = 0;
4552                 }
4553
4554                 if (framesize > info->max_frame_size + crc_size)
4555                         info->icount.rxlong++;
4556                 else {
4557                         /* copy dma buffer(s) to contiguous temp buffer */
4558                         int copy_count = framesize;
4559                         int i = start;
4560                         unsigned char *p = info->tmp_rbuf;
4561                         info->tmp_rbuf_count = framesize;
4562
4563                         info->icount.rxok++;
4564
4565                         while(copy_count) {
4566                                 int partial_count = min_t(int, copy_count, info->rbuf_fill_level);
4567                                 memcpy(p, info->rbufs[i].buf, partial_count);
4568                                 p += partial_count;
4569                                 copy_count -= partial_count;
4570                                 if (++i == info->rbuf_count)
4571                                         i = 0;
4572                         }
4573
4574                         if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4575                                 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4576                                 framesize++;
4577                         }
4578
4579 #if SYNCLINK_GENERIC_HDLC
4580                         if (info->netcount)
4581                                 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4582                         else
4583 #endif
4584                                 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4585                 }
4586         }
4587         free_rbufs(info, start, end);
4588         return true;
4589
4590 cleanup:
4591         return false;
4592 }
4593
4594 /*
4595  * pass receive buffer (RAW synchronous mode) to tty layer
4596  * return true if buffer available, otherwise false
4597  */
4598 static bool rx_get_buf(struct slgt_info *info)
4599 {
4600         unsigned int i = info->rbuf_current;
4601         unsigned int count;
4602
4603         if (!desc_complete(info->rbufs[i]))
4604                 return false;
4605         count = desc_count(info->rbufs[i]);
4606         switch(info->params.mode) {
4607         case MGSL_MODE_MONOSYNC:
4608         case MGSL_MODE_BISYNC:
4609                 /* ignore residue in byte synchronous modes */
4610                 if (desc_residue(info->rbufs[i]))
4611                         count--;
4612                 break;
4613         }
4614         DBGDATA(info, info->rbufs[i].buf, count, "rx");
4615         DBGINFO(("rx_get_buf size=%d\n", count));
4616         if (count)
4617                 ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
4618                                   info->flag_buf, count);
4619         free_rbufs(info, i, i);
4620         return true;
4621 }
4622
4623 static void reset_tbufs(struct slgt_info *info)
4624 {
4625         unsigned int i;
4626         info->tbuf_current = 0;
4627         for (i=0 ; i < info->tbuf_count ; i++) {
4628                 info->tbufs[i].status = 0;
4629                 info->tbufs[i].count  = 0;
4630         }
4631 }
4632
4633 /*
4634  * return number of free transmit DMA buffers
4635  */
4636 static unsigned int free_tbuf_count(struct slgt_info *info)
4637 {
4638         unsigned int count = 0;
4639         unsigned int i = info->tbuf_current;
4640
4641         do
4642         {
4643                 if (desc_count(info->tbufs[i]))
4644                         break; /* buffer in use */
4645                 ++count;
4646                 if (++i == info->tbuf_count)
4647                         i=0;
4648         } while (i != info->tbuf_current);
4649
4650         /* if tx DMA active, last zero count buffer is in use */
4651         if (count && (rd_reg32(info, TDCSR) & BIT0))
4652                 --count;
4653
4654         return count;
4655 }
4656
4657 /*
4658  * return number of bytes in unsent transmit DMA buffers
4659  * and the serial controller tx FIFO
4660  */
4661 static unsigned int tbuf_bytes(struct slgt_info *info)
4662 {
4663         unsigned int total_count = 0;
4664         unsigned int i = info->tbuf_current;
4665         unsigned int reg_value;
4666         unsigned int count;
4667         unsigned int active_buf_count = 0;
4668
4669         /*
4670          * Add descriptor counts for all tx DMA buffers.
4671          * If count is zero (cleared by DMA controller after read),
4672          * the buffer is complete or is actively being read from.
4673          *
4674          * Record buf_count of last buffer with zero count starting
4675          * from current ring position. buf_count is mirror
4676          * copy of count and is not cleared by serial controller.
4677          * If DMA controller is active, that buffer is actively
4678          * being read so add to total.
4679          */
4680         do {
4681                 count = desc_count(info->tbufs[i]);
4682                 if (count)
4683                         total_count += count;
4684                 else if (!total_count)
4685                         active_buf_count = info->tbufs[i].buf_count;
4686                 if (++i == info->tbuf_count)
4687                         i = 0;
4688         } while (i != info->tbuf_current);
4689
4690         /* read tx DMA status register */
4691         reg_value = rd_reg32(info, TDCSR);
4692
4693         /* if tx DMA active, last zero count buffer is in use */
4694         if (reg_value & BIT0)
4695                 total_count += active_buf_count;
4696
4697         /* add tx FIFO count = reg_value[15..8] */
4698         total_count += (reg_value >> 8) & 0xff;
4699
4700         /* if transmitter active add one byte for shift register */
4701         if (info->tx_active)
4702                 total_count++;
4703
4704         return total_count;
4705 }
4706
4707 /*
4708  * load transmit DMA buffer(s) with data
4709  */
4710 static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4711 {
4712         unsigned short count;
4713         unsigned int i;
4714         struct slgt_desc *d;
4715
4716         if (size == 0)
4717                 return;
4718
4719         DBGDATA(info, buf, size, "tx");
4720
4721         info->tbuf_start = i = info->tbuf_current;
4722
4723         while (size) {
4724                 d = &info->tbufs[i];
4725                 if (++i == info->tbuf_count)
4726                         i = 0;
4727
4728                 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4729                 memcpy(d->buf, buf, count);
4730
4731                 size -= count;
4732                 buf  += count;
4733
4734                 /*
4735                  * set EOF bit for last buffer of HDLC frame or
4736                  * for every buffer in raw mode
4737                  */
4738                 if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
4739                     info->params.mode == MGSL_MODE_RAW)
4740                         set_desc_eof(*d, 1);
4741                 else
4742                         set_desc_eof(*d, 0);
4743
4744                 set_desc_count(*d, count);
4745                 d->buf_count = count;
4746         }
4747
4748         info->tbuf_current = i;
4749 }
4750
4751 static int register_test(struct slgt_info *info)
4752 {
4753         static unsigned short patterns[] =
4754                 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4755         static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
4756         unsigned int i;
4757         int rc = 0;
4758
4759         for (i=0 ; i < count ; i++) {
4760                 wr_reg16(info, TIR, patterns[i]);
4761                 wr_reg16(info, BDR, patterns[(i+1)%count]);
4762                 if ((rd_reg16(info, TIR) != patterns[i]) ||
4763                     (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4764                         rc = -ENODEV;
4765                         break;
4766                 }
4767         }
4768         info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4769         info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4770         return rc;
4771 }
4772
4773 static int irq_test(struct slgt_info *info)
4774 {
4775         unsigned long timeout;
4776         unsigned long flags;
4777         struct tty_struct *oldtty = info->port.tty;
4778         u32 speed = info->params.data_rate;
4779
4780         info->params.data_rate = 921600;
4781         info->port.tty = NULL;
4782
4783         spin_lock_irqsave(&info->lock, flags);
4784         async_mode(info);
4785         slgt_irq_on(info, IRQ_TXIDLE);
4786
4787         /* enable transmitter */
4788         wr_reg16(info, TCR,
4789                 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4790
4791         /* write one byte and wait for tx idle */
4792         wr_reg16(info, TDR, 0);
4793
4794         /* assume failure */
4795         info->init_error = DiagStatus_IrqFailure;
4796         info->irq_occurred = false;
4797
4798         spin_unlock_irqrestore(&info->lock, flags);
4799
4800         timeout=100;
4801         while(timeout-- && !info->irq_occurred)
4802                 msleep_interruptible(10);
4803
4804         spin_lock_irqsave(&info->lock,flags);
4805         reset_port(info);
4806         spin_unlock_irqrestore(&info->lock,flags);
4807
4808         info->params.data_rate = speed;
4809         info->port.tty = oldtty;
4810
4811         info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
4812         return info->irq_occurred ? 0 : -ENODEV;
4813 }
4814
4815 static int loopback_test_rx(struct slgt_info *info)
4816 {
4817         unsigned char *src, *dest;
4818         int count;
4819
4820         if (desc_complete(info->rbufs[0])) {
4821                 count = desc_count(info->rbufs[0]);
4822                 src   = info->rbufs[0].buf;
4823                 dest  = info->tmp_rbuf;
4824
4825                 for( ; count ; count-=2, src+=2) {
4826                         /* src=data byte (src+1)=status byte */
4827                         if (!(*(src+1) & (BIT9 + BIT8))) {
4828                                 *dest = *src;
4829                                 dest++;
4830                                 info->tmp_rbuf_count++;
4831                         }
4832                 }
4833                 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
4834                 return 1;
4835         }
4836         return 0;
4837 }
4838
4839 static int loopback_test(struct slgt_info *info)
4840 {
4841 #define TESTFRAMESIZE 20
4842
4843         unsigned long timeout;
4844         u16 count = TESTFRAMESIZE;
4845         unsigned char buf[TESTFRAMESIZE];
4846         int rc = -ENODEV;
4847         unsigned long flags;
4848
4849         struct tty_struct *oldtty = info->port.tty;
4850         MGSL_PARAMS params;
4851
4852         memcpy(&params, &info->params, sizeof(params));
4853
4854         info->params.mode = MGSL_MODE_ASYNC;
4855         info->params.data_rate = 921600;
4856         info->params.loopback = 1;
4857         info->port.tty = NULL;
4858
4859         /* build and send transmit frame */
4860         for (count = 0; count < TESTFRAMESIZE; ++count)
4861                 buf[count] = (unsigned char)count;
4862
4863         info->tmp_rbuf_count = 0;
4864         memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
4865
4866         /* program hardware for HDLC and enabled receiver */
4867         spin_lock_irqsave(&info->lock,flags);
4868         async_mode(info);
4869         rx_start(info);
4870         info->tx_count = count;
4871         tx_load(info, buf, count);
4872         tx_start(info);
4873         spin_unlock_irqrestore(&info->lock, flags);
4874
4875         /* wait for receive complete */
4876         for (timeout = 100; timeout; --timeout) {
4877                 msleep_interruptible(10);
4878                 if (loopback_test_rx(info)) {
4879                         rc = 0;
4880                         break;
4881                 }
4882         }
4883
4884         /* verify received frame length and contents */
4885         if (!rc && (info->tmp_rbuf_count != count ||
4886                   memcmp(buf, info->tmp_rbuf, count))) {
4887                 rc = -ENODEV;
4888         }
4889
4890         spin_lock_irqsave(&info->lock,flags);
4891         reset_adapter(info);
4892         spin_unlock_irqrestore(&info->lock,flags);
4893
4894         memcpy(&info->params, &params, sizeof(info->params));
4895         info->port.tty = oldtty;
4896
4897         info->init_error = rc ? DiagStatus_DmaFailure : 0;
4898         return rc;
4899 }
4900
4901 static int adapter_test(struct slgt_info *info)
4902 {
4903         DBGINFO(("testing %s\n", info->device_name));
4904         if (register_test(info) < 0) {
4905                 printk("register test failure %s addr=%08X\n",
4906                         info->device_name, info->phys_reg_addr);
4907         } else if (irq_test(info) < 0) {
4908                 printk("IRQ test failure %s IRQ=%d\n",
4909                         info->device_name, info->irq_level);
4910         } else if (loopback_test(info) < 0) {
4911                 printk("loopback test failure %s\n", info->device_name);
4912         }
4913         return info->init_error;
4914 }
4915
4916 /*
4917  * transmit timeout handler
4918  */
4919 static void tx_timeout(unsigned long context)
4920 {
4921         struct slgt_info *info = (struct slgt_info*)context;
4922         unsigned long flags;
4923
4924         DBGINFO(("%s tx_timeout\n", info->device_name));
4925         if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
4926                 info->icount.txtimeout++;
4927         }
4928         spin_lock_irqsave(&info->lock,flags);
4929         info->tx_active = false;
4930         info->tx_count = 0;
4931         spin_unlock_irqrestore(&info->lock,flags);
4932
4933 #if SYNCLINK_GENERIC_HDLC
4934         if (info->netcount)
4935                 hdlcdev_tx_done(info);
4936         else
4937 #endif
4938                 bh_transmit(info);
4939 }
4940
4941 /*
4942  * receive buffer polling timer
4943  */
4944 static void rx_timeout(unsigned long context)
4945 {
4946         struct slgt_info *info = (struct slgt_info*)context;
4947         unsigned long flags;
4948
4949         DBGINFO(("%s rx_timeout\n", info->device_name));
4950         spin_lock_irqsave(&info->lock, flags);
4951         info->pending_bh |= BH_RECEIVE;
4952         spin_unlock_irqrestore(&info->lock, flags);
4953         bh_handler(&info->task);
4954 }
4955