git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ehci-hub.c

   1 /*
   2  * Copyright (C) 2001-2004 by David Brownell
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 /* this file is part of ehci-hcd.c */
  20
  21 /*-------------------------------------------------------------------------*/
  22
  23 /*
  24  * EHCI Root Hub ... the nonsharable stuff
  25  *
  26  * Registers don't need cpu_to_le32, that happens transparently
  27  */
  28
  29 /*-------------------------------------------------------------------------*/
  30
  31 #ifdef  CONFIG_PM
  32
  33 static int ehci_hub_suspend (struct usb_hcd *hcd)
  34 {
  35         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
  36         int                     port;
  37
  38         if (time_before (jiffies, ehci->next_statechange))
  39                 msleep(5);
  40
  41         port = HCS_N_PORTS (ehci->hcs_params);
  42         spin_lock_irq (&ehci->lock);
  43
  44         /* stop schedules, clean any completed work */
  45         if (HC_IS_RUNNING(hcd->state)) {
  46                 ehci_quiesce (ehci);
  47                 hcd->state = HC_STATE_QUIESCING;
  48         }
  49         ehci->command = readl (&ehci->regs->command);
  50         if (ehci->reclaim)
  51                 ehci->reclaim_ready = 1;
  52         ehci_work(ehci, NULL);
  53
  54         /* suspend any active/unsuspended ports, maybe allow wakeup */
  55         while (port--) {
  56                 u32 __iomem     *reg = &ehci->regs->port_status [port];
  57                 u32             t1 = readl (reg);
  58                 u32             t2 = t1;
  59
  60                 if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
  61                         t2 |= PORT_SUSPEND;
  62                 if (hcd->remote_wakeup)
  63                         t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
  64                 else
  65                         t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
  66
  67                 if (t1 != t2) {
  68                         ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
  69                                 port + 1, t1, t2);
  70                         writel (t2, reg);
  71                 }
  72         }
  73
  74         /* turn off now-idle HC */
  75         del_timer_sync (&ehci->watchdog);
  76         ehci_halt (ehci);
  77         hcd->state = HC_STATE_SUSPENDED;
  78
  79         ehci->next_statechange = jiffies + msecs_to_jiffies(10);
  80         spin_unlock_irq (&ehci->lock);
  81         return 0;
  82 }
  83
  84
  85 /* caller has locked the root hub, and should reset/reinit on error */
  86 static int ehci_hub_resume (struct usb_hcd *hcd)
  87 {
  88         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
  89         u32                     temp;
  90         int                     i;
  91         int                     intr_enable;
  92
  93         if (time_before (jiffies, ehci->next_statechange))
  94                 msleep(5);
  95         spin_lock_irq (&ehci->lock);
  96
  97         /* re-init operational registers in case we lost power */
  98         if (readl (&ehci->regs->intr_enable) == 0) {
  99                 /* at least some APM implementations will try to deliver
 100                  * IRQs right away, so delay them until we're ready.
 101                  */
 102                 intr_enable = 1;
 103                 writel (0, &ehci->regs->segment);
 104                 writel (ehci->periodic_dma, &ehci->regs->frame_list);
 105                 writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
 106         } else
 107                 intr_enable = 0;
 108         ehci_dbg(ehci, "resume root hub%s\n",
 109                         intr_enable ? " after power loss" : "");
 110
 111         /* restore CMD_RUN, framelist size, and irq threshold */
 112         writel (ehci->command, &ehci->regs->command);
 113
 114         /* take ports out of suspend */
 115         i = HCS_N_PORTS (ehci->hcs_params);
 116         while (i--) {
 117                 temp = readl (&ehci->regs->port_status [i]);
 118                 temp &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
 119                 if (temp & PORT_SUSPEND) {
 120                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
 121                         temp |= PORT_RESUME;
 122                 }
 123                 writel (temp, &ehci->regs->port_status [i]);
 124         }
 125         i = HCS_N_PORTS (ehci->hcs_params);
 126         mdelay (20);
 127         while (i--) {
 128                 temp = readl (&ehci->regs->port_status [i]);
 129                 if ((temp & PORT_SUSPEND) == 0)
 130                         continue;
 131                 temp &= ~PORT_RESUME;
 132                 writel (temp, &ehci->regs->port_status [i]);
 133                 ehci_vdbg (ehci, "resumed port %d\n", i + 1);
 134         }
 135         (void) readl (&ehci->regs->command);
 136
 137         /* maybe re-activate the schedule(s) */
 138         temp = 0;
 139         if (ehci->async->qh_next.qh)
 140                 temp |= CMD_ASE;
 141         if (ehci->periodic_sched)
 142                 temp |= CMD_PSE;
 143         if (temp) {
 144                 ehci->command |= temp;
 145                 writel (ehci->command, &ehci->regs->command);
 146         }
 147
 148         ehci->next_statechange = jiffies + msecs_to_jiffies(5);
 149         hcd->state = HC_STATE_RUNNING;
 150
 151         /* Now we can safely re-enable irqs */
 152         if (intr_enable)
 153                 writel (INTR_MASK, &ehci->regs->intr_enable);
 154
 155         spin_unlock_irq (&ehci->lock);
 156         return 0;
 157 }
 158
 159 #else
 160
 161 #define ehci_hub_suspend        NULL
 162 #define ehci_hub_resume         NULL
 163
 164 #endif  /* CONFIG_PM */
 165
 166 /*-------------------------------------------------------------------------*/
 167
 168 static int check_reset_complete (
 169         struct ehci_hcd *ehci,
 170         int             index,
 171         int             port_status
 172 ) {
 173         if (!(port_status & PORT_CONNECT)) {
 174                 ehci->reset_done [index] = 0;
 175                 return port_status;
 176         }
 177
 178         /* if reset finished and it's still not enabled -- handoff */
 179         if (!(port_status & PORT_PE)) {
 180
 181                 /* with integrated TT, there's nobody to hand it to! */
 182                 if (ehci_is_TDI(ehci)) {
 183                         ehci_dbg (ehci,
 184                                 "Failed to enable port %d on root hub TT\n",
 185                                 index+1);
 186                         return port_status;
 187                 }
 188
 189                 ehci_dbg (ehci, "port %d full speed --> companion\n",
 190                         index + 1);
 191
 192                 // what happens if HCS_N_CC(params) == 0 ?
 193                 port_status |= PORT_OWNER;
 194                 writel (port_status, &ehci->regs->port_status [index]);
 195
 196         } else
 197                 ehci_dbg (ehci, "port %d high speed\n", index + 1);
 198
 199         return port_status;
 200 }
 201
 202 /*-------------------------------------------------------------------------*/
 203
 204
 205 /* build "status change" packet (one or two bytes) from HC registers */
 206
 207 static int
 208 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 209 {
 210         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 211         u32             temp, status = 0;
 212         int             ports, i, retval = 1;
 213         unsigned long   flags;
 214
 215         /* if !USB_SUSPEND, root hub timers won't get shut down ... */
 216         if (!HC_IS_RUNNING(hcd->state))
 217                 return 0;
 218
 219         /* init status to no-changes */
 220         buf [0] = 0;
 221         ports = HCS_N_PORTS (ehci->hcs_params);
 222         if (ports > 7) {
 223                 buf [1] = 0;
 224                 retval++;
 225         }
 226
 227         /* no hub change reports (bit 0) for now (power, ...) */
 228
 229         /* port N changes (bit N)? */
 230         spin_lock_irqsave (&ehci->lock, flags);
 231         for (i = 0; i < ports; i++) {
 232                 temp = readl (&ehci->regs->port_status [i]);
 233                 if (temp & PORT_OWNER) {
 234                         /* don't report this in GetPortStatus */
 235                         if (temp & PORT_CSC) {
 236                                 temp &= ~PORT_CSC;
 237                                 writel (temp, &ehci->regs->port_status [i]);
 238                         }
 239                         continue;
 240                 }
 241                 if (!(temp & PORT_CONNECT))
 242                         ehci->reset_done [i] = 0;
 243                 if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0
 244                                 // PORT_STAT_C_SUSPEND?
 245                                 || ((temp & PORT_RESUME) != 0
 246                                         && time_after (jiffies,
 247                                                 ehci->reset_done [i]))) {
 248                         if (i < 7)
 249                             buf [0] |= 1 << (i + 1);
 250                         else
 251                             buf [1] |= 1 << (i - 7);
 252                         status = STS_PCD;
 253                 }
 254         }
 255         /* FIXME autosuspend idle root hubs */
 256         spin_unlock_irqrestore (&ehci->lock, flags);
 257         return status ? retval : 0;
 258 }
 259
 260 /*-------------------------------------------------------------------------*/
 261
 262 static void
 263 ehci_hub_descriptor (
 264         struct ehci_hcd                 *ehci,
 265         struct usb_hub_descriptor       *desc
 266 ) {
 267         int             ports = HCS_N_PORTS (ehci->hcs_params);
 268         u16             temp;
 269
 270         desc->bDescriptorType = 0x29;
 271         desc->bPwrOn2PwrGood = 10;      /* ehci 1.0, 2.3.9 says 20ms max */
 272         desc->bHubContrCurrent = 0;
 273
 274         desc->bNbrPorts = ports;
 275         temp = 1 + (ports / 8);
 276         desc->bDescLength = 7 + 2 * temp;
 277
 278         /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 279         memset (&desc->bitmap [0], 0, temp);
 280         memset (&desc->bitmap [temp], 0xff, temp);
 281
 282         temp = 0x0008;                  /* per-port overcurrent reporting */
 283         if (HCS_PPC (ehci->hcs_params))
 284                 temp |= 0x0001;         /* per-port power control */
 285         else
 286                 temp |= 0x0002;         /* no power switching */
 287 #if 0
 288 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
 289         if (HCS_INDICATOR (ehci->hcs_params))
 290                 temp |= 0x0080;         /* per-port indicators (LEDs) */
 291 #endif
 292         desc->wHubCharacteristics = (__force __u16)cpu_to_le16 (temp);
 293 }
 294
 295 /*-------------------------------------------------------------------------*/
 296
 297 #define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 298
 299 static int ehci_hub_control (
 300         struct usb_hcd  *hcd,
 301         u16             typeReq,
 302         u16             wValue,
 303         u16             wIndex,
 304         char            *buf,
 305         u16             wLength
 306 ) {
 307         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 308         int             ports = HCS_N_PORTS (ehci->hcs_params);
 309         u32             temp, status;
 310         unsigned long   flags;
 311         int             retval = 0;
 312
 313         /*
 314          * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
 315          * HCS_INDICATOR may say we can change LEDs to off/amber/green.
 316          * (track current state ourselves) ... blink for diagnostics,
 317          * power, "this is the one", etc.  EHCI spec supports this.
 318          */
 319
 320         spin_lock_irqsave (&ehci->lock, flags);
 321         switch (typeReq) {
 322         case ClearHubFeature:
 323                 switch (wValue) {
 324                 case C_HUB_LOCAL_POWER:
 325                 case C_HUB_OVER_CURRENT:
 326                         /* no hub-wide feature/status flags */
 327                         break;
 328                 default:
 329                         goto error;
 330                 }
 331                 break;
 332         case ClearPortFeature:
 333                 if (!wIndex || wIndex > ports)
 334                         goto error;
 335                 wIndex--;
 336                 temp = readl (&ehci->regs->port_status [wIndex]);
 337                 if (temp & PORT_OWNER)
 338                         break;
 339
 340                 switch (wValue) {
 341                 case USB_PORT_FEAT_ENABLE:
 342                         writel (temp & ~PORT_PE,
 343                                 &ehci->regs->port_status [wIndex]);
 344                         break;
 345                 case USB_PORT_FEAT_C_ENABLE:
 346                         writel (temp | PORT_PEC,
 347                                 &ehci->regs->port_status [wIndex]);
 348                         break;
 349                 case USB_PORT_FEAT_SUSPEND:
 350                         if (temp & PORT_RESET)
 351                                 goto error;
 352                         if (temp & PORT_SUSPEND) {
 353                                 if ((temp & PORT_PE) == 0)
 354                                         goto error;
 355                                 /* resume signaling for 20 msec */
 356                                 writel ((temp & ~PORT_WAKE_BITS) | PORT_RESUME,
 357                                         &ehci->regs->port_status [wIndex]);
 358                                 ehci->reset_done [wIndex] = jiffies
 359                                                 + msecs_to_jiffies (20);
 360                         }
 361                         break;
 362                 case USB_PORT_FEAT_C_SUSPEND:
 363                         /* we auto-clear this feature */
 364                         break;
 365                 case USB_PORT_FEAT_POWER:
 366                         if (HCS_PPC (ehci->hcs_params))
 367                                 writel (temp & ~PORT_POWER,
 368                                         &ehci->regs->port_status [wIndex]);
 369                         break;
 370                 case USB_PORT_FEAT_C_CONNECTION:
 371                         writel (temp | PORT_CSC,
 372                                 &ehci->regs->port_status [wIndex]);
 373                         break;
 374                 case USB_PORT_FEAT_C_OVER_CURRENT:
 375                         writel (temp | PORT_OCC,
 376                                 &ehci->regs->port_status [wIndex]);
 377                         break;
 378                 case USB_PORT_FEAT_C_RESET:
 379                         /* GetPortStatus clears reset */
 380                         break;
 381                 default:
 382                         goto error;
 383                 }
 384                 readl (&ehci->regs->command);   /* unblock posted write */
 385                 break;
 386         case GetHubDescriptor:
 387                 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
 388                         buf);
 389                 break;
 390         case GetHubStatus:
 391                 /* no hub-wide feature/status flags */
 392                 memset (buf, 0, 4);
 393                 //cpu_to_le32s ((u32 *) buf);
 394                 break;
 395         case GetPortStatus:
 396                 if (!wIndex || wIndex > ports)
 397                         goto error;
 398                 wIndex--;
 399                 status = 0;
 400                 temp = readl (&ehci->regs->port_status [wIndex]);
 401
 402                 // wPortChange bits
 403                 if (temp & PORT_CSC)
 404                         status |= 1 << USB_PORT_FEAT_C_CONNECTION;
 405                 if (temp & PORT_PEC)
 406                         status |= 1 << USB_PORT_FEAT_C_ENABLE;
 407                 if (temp & PORT_OCC)
 408                         status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 409
 410                 /* whoever resumes must GetPortStatus to complete it!! */
 411                 if ((temp & PORT_RESUME)
 412                                 && time_after (jiffies,
 413                                         ehci->reset_done [wIndex])) {
 414                         status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 415                         ehci->reset_done [wIndex] = 0;
 416
 417                         /* stop resume signaling */
 418                         temp = readl (&ehci->regs->port_status [wIndex]);
 419                         writel (temp & ~PORT_RESUME,
 420                                 &ehci->regs->port_status [wIndex]);
 421                         retval = handshake (
 422                                         &ehci->regs->port_status [wIndex],
 423                                         PORT_RESUME, 0, 2000 /* 2msec */);
 424                         if (retval != 0) {
 425                                 ehci_err (ehci, "port %d resume error %d\n",
 426                                         wIndex + 1, retval);
 427                                 goto error;
 428                         }
 429                         temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
 430                 }
 431
 432                 /* whoever resets must GetPortStatus to complete it!! */
 433                 if ((temp & PORT_RESET)
 434                                 && time_after (jiffies,
 435                                         ehci->reset_done [wIndex])) {
 436                         status |= 1 << USB_PORT_FEAT_C_RESET;
 437                         ehci->reset_done [wIndex] = 0;
 438
 439                         /* force reset to complete */
 440                         writel (temp & ~PORT_RESET,
 441                                         &ehci->regs->port_status [wIndex]);
 442                         /* REVISIT:  some hardware needs 550+ usec to clear
 443                          * this bit; seems too long to spin routinely...
 444                          */
 445                         retval = handshake (
 446                                         &ehci->regs->port_status [wIndex],
 447                                         PORT_RESET, 0, 750);
 448                         if (retval != 0) {
 449                                 ehci_err (ehci, "port %d reset error %d\n",
 450                                         wIndex + 1, retval);
 451                                 goto error;
 452                         }
 453
 454                         /* see what we found out */
 455                         temp = check_reset_complete (ehci, wIndex,
 456                                 readl (&ehci->regs->port_status [wIndex]));
 457                 }
 458
 459                 // don't show wPortStatus if it's owned by a companion hc
 460                 if (!(temp & PORT_OWNER)) {
 461                         if (temp & PORT_CONNECT) {
 462                                 status |= 1 << USB_PORT_FEAT_CONNECTION;
 463                                 // status may be from integrated TT
 464                                 status |= ehci_port_speed(ehci, temp);
 465                         }
 466                         if (temp & PORT_PE)
 467                                 status |= 1 << USB_PORT_FEAT_ENABLE;
 468                         if (temp & (PORT_SUSPEND|PORT_RESUME))
 469                                 status |= 1 << USB_PORT_FEAT_SUSPEND;
 470                         if (temp & PORT_OC)
 471                                 status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
 472                         if (temp & PORT_RESET)
 473                                 status |= 1 << USB_PORT_FEAT_RESET;
 474                         if (temp & PORT_POWER)
 475                                 status |= 1 << USB_PORT_FEAT_POWER;
 476                 }
 477
 478 #ifndef EHCI_VERBOSE_DEBUG
 479         if (status & ~0xffff)   /* only if wPortChange is interesting */
 480 #endif
 481                 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
 482                 // we "know" this alignment is good, caller used kmalloc()...
 483                 *((__le32 *) buf) = cpu_to_le32 (status);
 484                 break;
 485         case SetHubFeature:
 486                 switch (wValue) {
 487                 case C_HUB_LOCAL_POWER:
 488                 case C_HUB_OVER_CURRENT:
 489                         /* no hub-wide feature/status flags */
 490                         break;
 491                 default:
 492                         goto error;
 493                 }
 494                 break;
 495         case SetPortFeature:
 496                 if (!wIndex || wIndex > ports)
 497                         goto error;
 498                 wIndex--;
 499                 temp = readl (&ehci->regs->port_status [wIndex]);
 500                 if (temp & PORT_OWNER)
 501                         break;
 502
 503                 switch (wValue) {
 504                 case USB_PORT_FEAT_SUSPEND:
 505                         if ((temp & PORT_PE) == 0
 506                                         || (temp & PORT_RESET) != 0)
 507                                 goto error;
 508                         if (hcd->remote_wakeup)
 509                                 temp |= PORT_WAKE_BITS;
 510                         writel (temp | PORT_SUSPEND,
 511                                 &ehci->regs->port_status [wIndex]);
 512                         break;
 513                 case USB_PORT_FEAT_POWER:
 514                         if (HCS_PPC (ehci->hcs_params))
 515                                 writel (temp | PORT_POWER,
 516                                         &ehci->regs->port_status [wIndex]);
 517                         break;
 518                 case USB_PORT_FEAT_RESET:
 519                         if (temp & PORT_RESUME)
 520                                 goto error;
 521                         /* line status bits may report this as low speed,
 522                          * which can be fine if this root hub has a
 523                          * transaction translator built in.
 524                          */
 525                         if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
 526                                         && !ehci_is_TDI(ehci)
 527                                         && PORT_USB11 (temp)) {
 528                                 ehci_dbg (ehci,
 529                                         "port %d low speed --> companion\n",
 530                                         wIndex + 1);
 531                                 temp |= PORT_OWNER;
 532                         } else {
 533                                 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
 534                                 temp |= PORT_RESET;
 535                                 temp &= ~PORT_PE;
 536
 537                                 /*
 538                                  * caller must wait, then call GetPortStatus
 539                                  * usb 2.0 spec says 50 ms resets on root
 540                                  */
 541                                 ehci->reset_done [wIndex] = jiffies
 542                                                 + msecs_to_jiffies (50);
 543                         }
 544                         writel (temp, &ehci->regs->port_status [wIndex]);
 545                         break;
 546                 default:
 547                         goto error;
 548                 }
 549                 readl (&ehci->regs->command);   /* unblock posted writes */
 550                 break;
 551
 552         default:
 553 error:
 554                 /* "stall" on error */
 555                 retval = -EPIPE;
 556         }
 557         spin_unlock_irqrestore (&ehci->lock, flags);
 558         return retval;
 559 }