2 * saa717x - Philips SAA717xHL video decoder driver
4 * Based on the saa7115 driver
6 * Changes by Ohta Kyuma <alpha292@bremen.or.jp>
7 * - Apply to SAA717x,NEC uPD64031,uPD64083. (1/31/2004)
9 * Changes by T.Adachi (tadachi@tadachi-net.com)
10 * - support audio, video scaler etc, and checked the initialize sequence.
12 * Cleaned up by Hans Verkuil <hverkuil@xs4all.nl>
14 * Note: this is a reversed engineered driver based on captures from
15 * the I2C bus under Windows. This chip is very similar to the saa7134,
16 * though. Unfortunately, this driver is currently only working for NTSC.
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License as published by
20 * the Free Software Foundation; either version 2 of the License, or
21 * (at your option) any later version.
23 * This program is distributed in the hope that it will be useful,
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
33 #include <linux/version.h>
34 #include <linux/module.h>
35 #include <linux/kernel.h>
36 #include <linux/sched.h>
38 #include <linux/videodev.h>
39 #include <linux/videodev2.h>
40 #include <linux/i2c.h>
41 #include <media/v4l2-common.h>
42 #include <media/v4l2-i2c-drv.h>
44 MODULE_DESCRIPTION("Philips SAA717x audio/video decoder driver");
45 MODULE_AUTHOR("K. Ohta, T. Adachi, Hans Verkuil");
46 MODULE_LICENSE("GPL");
49 module_param(debug, int, 0644);
50 MODULE_PARM_DESC(debug, "Debug level (0-1)");
54 * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
57 struct saa717x_state {
73 u16 audio_main_treble;
74 u16 audio_main_volume;
75 u16 audio_main_balance;
79 /* ----------------------------------------------------------------------- */
82 #define TUNER_AUDIO_MONO 0 /* LL */
83 #define TUNER_AUDIO_STEREO 1 /* LR */
84 #define TUNER_AUDIO_LANG1 2 /* LL */
85 #define TUNER_AUDIO_LANG2 3 /* RR */
87 #define SAA717X_NTSC_WIDTH (704)
88 #define SAA717X_NTSC_HEIGHT (480)
90 /* ----------------------------------------------------------------------- */
92 static int saa717x_write(struct i2c_client *client, u32 reg, u32 value)
94 struct i2c_adapter *adap = client->adapter;
95 int fw_addr = reg == 0x454 || (reg >= 0x464 && reg <= 0x478) || reg == 0x480 || reg == 0x488;
100 msg.addr = client->addr;
101 mm1[0] = (reg >> 8) & 0xff;
105 mm1[4] = (value >> 16) & 0xff;
106 mm1[3] = (value >> 8) & 0xff;
107 mm1[2] = value & 0xff;
109 mm1[2] = value & 0xff;
111 msg.len = fw_addr ? 5 : 3; /* Long Registers have *only* three bytes! */
113 v4l_dbg(2, debug, client, "wrote: reg 0x%03x=%08x\n", reg, value);
114 return i2c_transfer(adap, &msg, 1) == 1;
117 static void saa717x_write_regs(struct i2c_client *client, u32 *data)
119 while (data[0] || data[1]) {
120 saa717x_write(client, data[0], data[1]);
125 static u32 saa717x_read(struct i2c_client *client, u32 reg)
127 struct i2c_adapter *adap = client->adapter;
128 int fw_addr = (reg >= 0x404 && reg <= 0x4b8) || reg == 0x528;
129 unsigned char mm1[2];
130 unsigned char mm2[4] = { 0, 0, 0, 0 };
131 struct i2c_msg msgs[2];
135 msgs[1].flags = I2C_M_RD;
136 msgs[0].addr = msgs[1].addr = client->addr;
137 mm1[0] = (reg >> 8) & 0xff;
141 msgs[1].len = fw_addr ? 3 : 1; /* Multibyte Registers contains *only* 3 bytes */
143 i2c_transfer(adap, msgs, 2);
146 value = (mm2[2] & 0xff) | ((mm2[1] & 0xff) >> 8) | ((mm2[0] & 0xff) >> 16);
148 value = mm2[0] & 0xff;
150 v4l_dbg(2, debug, client, "read: reg 0x%03x=0x%08x\n", reg, value);
154 /* ----------------------------------------------------------------------- */
156 static u32 reg_init_initialize[] =
158 /* from linux driver */
159 0x101, 0x008, /* Increment delay */
161 0x103, 0x000, /* Analog input control 2 */
162 0x104, 0x090, /* Analog input control 3 */
163 0x105, 0x090, /* Analog input control 4 */
164 0x106, 0x0eb, /* Horizontal sync start */
165 0x107, 0x0e0, /* Horizontal sync stop */
166 0x109, 0x055, /* Luminance control */
168 0x10f, 0x02a, /* Chroma gain control */
169 0x110, 0x000, /* Chroma control 2 */
171 0x114, 0x045, /* analog/ADC */
173 0x118, 0x040, /* RAW data gain */
174 0x119, 0x080, /* RAW data offset */
176 0x044, 0x000, /* VBI horizontal input window start (L) TASK A */
177 0x045, 0x000, /* VBI horizontal input window start (H) TASK A */
178 0x046, 0x0cf, /* VBI horizontal input window stop (L) TASK A */
179 0x047, 0x002, /* VBI horizontal input window stop (H) TASK A */
181 0x049, 0x000, /* VBI vertical input window start (H) TASK A */
183 0x04c, 0x0d0, /* VBI horizontal output length (L) TASK A */
184 0x04d, 0x002, /* VBI horizontal output length (H) TASK A */
186 0x064, 0x080, /* Lumina brightness TASK A */
187 0x065, 0x040, /* Luminance contrast TASK A */
188 0x066, 0x040, /* Chroma saturation TASK A */
190 0x068, 0x000, /* VBI horizontal scaling increment (L) TASK A */
191 0x069, 0x004, /* VBI horizontal scaling increment (H) TASK A */
192 0x06a, 0x000, /* VBI phase offset TASK A */
194 0x06e, 0x000, /* Horizontal phase offset Luma TASK A */
195 0x06f, 0x000, /* Horizontal phase offset Chroma TASK A */
197 0x072, 0x000, /* Vertical filter mode TASK A */
199 0x084, 0x000, /* VBI horizontal input window start (L) TAKS B */
200 0x085, 0x000, /* VBI horizontal input window start (H) TAKS B */
201 0x086, 0x0cf, /* VBI horizontal input window stop (L) TAKS B */
202 0x087, 0x002, /* VBI horizontal input window stop (H) TAKS B */
204 0x089, 0x000, /* VBI vertical input window start (H) TAKS B */
206 0x08c, 0x0d0, /* VBI horizontal output length (L) TASK B */
207 0x08d, 0x002, /* VBI horizontal output length (H) TASK B */
209 0x0a4, 0x080, /* Lumina brightness TASK B */
210 0x0a5, 0x040, /* Luminance contrast TASK B */
211 0x0a6, 0x040, /* Chroma saturation TASK B */
213 0x0a8, 0x000, /* VBI horizontal scaling increment (L) TASK B */
214 0x0a9, 0x004, /* VBI horizontal scaling increment (H) TASK B */
215 0x0aa, 0x000, /* VBI phase offset TASK B */
217 0x0ae, 0x000, /* Horizontal phase offset Luma TASK B */
218 0x0af, 0x000, /*Horizontal phase offset Chroma TASK B */
220 0x0b2, 0x000, /* Vertical filter mode TASK B */
222 0x00c, 0x000, /* Start point GREEN path */
223 0x00d, 0x000, /* Start point BLUE path */
224 0x00e, 0x000, /* Start point RED path */
226 0x010, 0x010, /* GREEN path gamma curve --- */
241 0x01f, 0x0ff, /* --- GREEN path gamma curve */
243 0x020, 0x010, /* BLUE path gamma curve --- */
258 0x02f, 0x0ff, /* --- BLUE path gamma curve */
260 0x030, 0x010, /* RED path gamma curve --- */
275 0x03f, 0x0ff, /* --- RED path gamma curve */
277 0x109, 0x085, /* Luminance control */
279 /**** from app start ****/
280 0x584, 0x000, /* AGC gain control */
281 0x585, 0x000, /* Program count */
282 0x586, 0x003, /* Status reset */
283 0x588, 0x0ff, /* Number of audio samples (L) */
284 0x589, 0x00f, /* Number of audio samples (M) */
285 0x58a, 0x000, /* Number of audio samples (H) */
286 0x58b, 0x000, /* Audio select */
287 0x58c, 0x010, /* Audio channel assign1 */
288 0x58d, 0x032, /* Audio channel assign2 */
289 0x58e, 0x054, /* Audio channel assign3 */
290 0x58f, 0x023, /* Audio format */
291 0x590, 0x000, /* SIF control */
293 0x595, 0x000, /* ?? */
294 0x596, 0x000, /* ?? */
295 0x597, 0x000, /* ?? */
297 0x464, 0x00, /* Digital input crossbar1 */
299 0x46c, 0xbbbb10, /* Digital output selection1-3 */
300 0x470, 0x101010, /* Digital output selection4-6 */
302 0x478, 0x00, /* Sound feature control */
304 0x474, 0x18, /* Softmute control */
306 0x454, 0x0425b9, /* Sound Easy programming(reset) */
307 0x454, 0x042539, /* Sound Easy programming(reset) */
310 /**** common setting( of DVD play, including scaler commands) ****/
311 0x042, 0x003, /* Data path configuration for VBI (TASK A) */
313 0x082, 0x003, /* Data path configuration for VBI (TASK B) */
315 0x108, 0x0f8, /* Sync control */
316 0x2a9, 0x0fd, /* ??? */
317 0x102, 0x089, /* select video input "mode 9" */
318 0x111, 0x000, /* Mode/delay control */
320 0x10e, 0x00a, /* Chroma control 1 */
322 0x594, 0x002, /* SIF, analog I/O select */
324 0x454, 0x0425b9, /* Sound */
628 static u32 reg_init_tuner_input[] = {
629 0x108, 0x0f8, /* Sync control */
630 0x111, 0x000, /* Mode/delay control */
631 0x10e, 0x00a, /* Chroma control 1 */
636 static u32 reg_init_composite_input[] = {
637 0x108, 0x0e8, /* Sync control */
638 0x111, 0x000, /* Mode/delay control */
639 0x10e, 0x04a, /* Chroma control 1 */
644 static u32 reg_init_svideo_input[] = {
645 0x108, 0x0e8, /* Sync control */
646 0x111, 0x000, /* Mode/delay control */
647 0x10e, 0x04a, /* Chroma control 1 */
651 static u32 reg_set_audio_template[4][2] =
654 tadachi 6/29 DMA audio output select?
656 7-4: DMA2, 3-0: DMA1 ch. DMA4, DMA3 DMA2, DMA1
657 0: MAIN left, 1: MAIN right
658 2: AUX1 left, 3: AUX1 right
659 4: AUX2 left, 5: AUX2 right
660 6: DPL left, 7: DPL right
661 8: DPL center, 9: DPL surround
662 A: monitor output, B: digital sense */
665 /* tadachi 6/29 DAC and I2S output select?
667 7-4:DAC right ch. 3-0:DAC left ch.
668 I2S1 right,left I2S2 right,left */
677 { /* for LANG2/SAP */
683 /* Get detected audio flags (from saa7134 driver) */
684 static void get_inf_dev_status(struct i2c_client *client,
685 int *dual_flag, int *stereo_flag)
689 static char *stdres[0x20] = {
690 [0x00] = "no standard detected",
691 [0x01] = "B/G (in progress)",
692 [0x02] = "D/K (in progress)",
693 [0x03] = "M (in progress)",
696 [0x05] = "B/G NICAM",
697 [0x06] = "D/K A2 (1)",
698 [0x07] = "D/K A2 (2)",
699 [0x08] = "D/K A2 (3)",
700 [0x09] = "D/K NICAM",
708 [0x0f] = "FM radio / IF 10.7 / 50 deemp",
709 [0x10] = "FM radio / IF 10.7 / 75 deemp",
710 [0x11] = "FM radio / IF sel / 50 deemp",
711 [0x12] = "FM radio / IF sel / 75 deemp",
713 [0x13 ... 0x1e] = "unknown",
714 [0x1f] = "??? [in progress]",
718 *dual_flag = *stereo_flag = 0;
720 /* (demdec status: 0x528) */
722 /* read current status */
723 reg_data3 = saa717x_read(client, 0x0528);
725 v4l_dbg(1, debug, client, "tvaudio thread status: 0x%x [%s%s%s]\n",
726 reg_data3, stdres[reg_data3 & 0x1f],
727 (reg_data3 & 0x000020) ? ",stereo" : "",
728 (reg_data3 & 0x000040) ? ",dual" : "");
729 v4l_dbg(1, debug, client, "detailed status: "
730 "%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n",
731 (reg_data3 & 0x000080) ? " A2/EIAJ pilot tone " : "",
732 (reg_data3 & 0x000100) ? " A2/EIAJ dual " : "",
733 (reg_data3 & 0x000200) ? " A2/EIAJ stereo " : "",
734 (reg_data3 & 0x000400) ? " A2/EIAJ noise mute " : "",
736 (reg_data3 & 0x000800) ? " BTSC/FM radio pilot " : "",
737 (reg_data3 & 0x001000) ? " SAP carrier " : "",
738 (reg_data3 & 0x002000) ? " BTSC stereo noise mute " : "",
739 (reg_data3 & 0x004000) ? " SAP noise mute " : "",
740 (reg_data3 & 0x008000) ? " VDSP " : "",
742 (reg_data3 & 0x010000) ? " NICST " : "",
743 (reg_data3 & 0x020000) ? " NICDU " : "",
744 (reg_data3 & 0x040000) ? " NICAM muted " : "",
745 (reg_data3 & 0x080000) ? " NICAM reserve sound " : "",
747 (reg_data3 & 0x100000) ? " init done " : "");
749 if (reg_data3 & 0x000220) {
750 v4l_dbg(1, debug, client, "ST!!!\n");
754 if (reg_data3 & 0x000140) {
755 v4l_dbg(1, debug, client, "DUAL!!!\n");
760 /* regs write to set audio mode */
761 static void set_audio_mode(struct i2c_client *client, int audio_mode)
763 v4l_dbg(1, debug, client, "writing registers to set audio mode by set %d\n",
766 saa717x_write(client, 0x46c, reg_set_audio_template[audio_mode][0]);
767 saa717x_write(client, 0x470, reg_set_audio_template[audio_mode][1]);
770 /* write regs to video output level (bright,contrast,hue,sat) */
771 static void set_video_output_level_regs(struct i2c_client *client,
772 struct saa717x_state *decoder)
774 /* brightness ffh (bright) - 80h (ITU level) - 00h (dark) */
775 saa717x_write(client, 0x10a, decoder->bright);
777 /* contrast 7fh (max: 1.984) - 44h (ITU) - 40h (1.0) -
778 0h (luminance off) 40: i2c dump
779 c0h (-1.0 inverse chrominance)
780 80h (-2.0 inverse chrominance) */
781 saa717x_write(client, 0x10b, decoder->contrast);
783 /* saturation? 7fh(max)-40h(ITU)-0h(color off)
784 c0h (-1.0 inverse chrominance)
785 80h (-2.0 inverse chrominance) */
786 saa717x_write(client, 0x10c, decoder->sat);
788 /* color hue (phase) control
789 7fh (+178.6) - 0h (0 normal) - 80h (-180.0) */
790 saa717x_write(client, 0x10d, decoder->hue);
793 /* write regs to set audio volume, bass and treble */
794 static int set_audio_regs(struct i2c_client *client,
795 struct saa717x_state *decoder)
797 u8 mute = 0xac; /* -84 dB */
799 unsigned int work_l, work_r;
801 /* set SIF analog I/O select */
802 saa717x_write(client, 0x0594, decoder->audio_input);
803 v4l_dbg(1, debug, client, "set audio input %d\n",
804 decoder->audio_input);
806 /* normalize ( 65535 to 0 -> 24 to -40 (not -84)) */
807 work_l = (min(65536 - decoder->audio_main_balance, 32768) * decoder->audio_main_volume) / 32768;
808 work_r = (min(decoder->audio_main_balance, (u16)32768) * decoder->audio_main_volume) / 32768;
809 decoder->audio_main_vol_l = (long)work_l * (24 - (-40)) / 65535 - 40;
810 decoder->audio_main_vol_r = (long)work_r * (24 - (-40)) / 65535 - 40;
812 /* set main volume */
813 /* main volume L[7-0],R[7-0],0x00 24=24dB,-83dB, -84(mute) */
814 /* def:0dB->6dB(MPG600GR) */
815 /* if mute is on, set mute */
816 if (decoder->audio_main_mute) {
817 val = mute | (mute << 8);
819 val = (u8)decoder->audio_main_vol_l |
820 ((u8)decoder->audio_main_vol_r << 8);
823 saa717x_write(client, 0x480, val);
825 /* bass and treble; go to another function */
826 /* set bass and treble */
827 val = decoder->audio_main_bass | (decoder->audio_main_treble << 8);
828 saa717x_write(client, 0x488, val);
832 /********** scaling staff ***********/
833 static void set_h_prescale(struct i2c_client *client,
834 int task, int prescale)
836 static const struct {
843 /* XPSC XACL XC2_1 XDCG VPFY */
855 static const int count = ARRAY_SIZE(vals);
858 task_shift = task * 0x40;
859 for (i = 0; i < count; i++)
860 if (vals[i].xpsc == prescale)
865 /* horizonal prescaling */
866 saa717x_write(client, 0x60 + task_shift, vals[i].xpsc);
867 /* accumulation length */
868 saa717x_write(client, 0x61 + task_shift, vals[i].xacl);
870 saa717x_write(client, 0x62 + task_shift,
871 (vals[i].xc2_1 << 3) | vals[i].xdcg);
872 /*FIR prefilter control */
873 saa717x_write(client, 0x63 + task_shift,
874 (vals[i].vpfy << 2) | vals[i].vpfy);
877 /********** scaling staff ***********/
878 static void set_v_scale(struct i2c_client *client, int task, int yscale)
882 task_shift = task * 0x40;
883 /* Vertical scaling ratio (LOW) */
884 saa717x_write(client, 0x70 + task_shift, yscale & 0xff);
885 /* Vertical scaling ratio (HI) */
886 saa717x_write(client, 0x71 + task_shift, yscale >> 8);
889 static int saa717x_set_audio_clock_freq(struct i2c_client *client, u32 freq)
891 /* not yet implament, so saa717x_cfg_??hz_??_audio is not defined. */
895 static int saa717x_set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
897 struct saa717x_state *state = i2c_get_clientdata(client);
900 case V4L2_CID_BRIGHTNESS:
901 if (ctrl->value < 0 || ctrl->value > 255) {
902 v4l_err(client, "invalid brightness setting %d\n", ctrl->value);
906 state->bright = ctrl->value;
907 v4l_dbg(1, debug, client, "bright:%d\n", state->bright);
908 saa717x_write(client, 0x10a, state->bright);
911 case V4L2_CID_CONTRAST:
912 if (ctrl->value < 0 || ctrl->value > 127) {
913 v4l_err(client, "invalid contrast setting %d\n", ctrl->value);
917 state->contrast = ctrl->value;
918 v4l_dbg(1, debug, client, "contrast:%d\n", state->contrast);
919 saa717x_write(client, 0x10b, state->contrast);
922 case V4L2_CID_SATURATION:
923 if (ctrl->value < 0 || ctrl->value > 127) {
924 v4l_err(client, "invalid saturation setting %d\n", ctrl->value);
928 state->sat = ctrl->value;
929 v4l_dbg(1, debug, client, "sat:%d\n", state->sat);
930 saa717x_write(client, 0x10c, state->sat);
934 if (ctrl->value < -127 || ctrl->value > 127) {
935 v4l_err(client, "invalid hue setting %d\n", ctrl->value);
939 state->hue = ctrl->value;
940 v4l_dbg(1, debug, client, "hue:%d\n", state->hue);
941 saa717x_write(client, 0x10d, state->hue);
944 case V4L2_CID_AUDIO_MUTE:
945 state->audio_main_mute = ctrl->value;
946 set_audio_regs(client, state);
949 case V4L2_CID_AUDIO_VOLUME:
950 state->audio_main_volume = ctrl->value;
951 set_audio_regs(client, state);
954 case V4L2_CID_AUDIO_BALANCE:
955 state->audio_main_balance = ctrl->value;
956 set_audio_regs(client, state);
959 case V4L2_CID_AUDIO_TREBLE:
960 state->audio_main_treble = ctrl->value;
961 set_audio_regs(client, state);
964 case V4L2_CID_AUDIO_BASS:
965 state->audio_main_bass = ctrl->value;
966 set_audio_regs(client, state);
976 static int saa717x_get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
978 struct saa717x_state *state = i2c_get_clientdata(client);
981 case V4L2_CID_BRIGHTNESS:
982 ctrl->value = state->bright;
985 case V4L2_CID_CONTRAST:
986 ctrl->value = state->contrast;
989 case V4L2_CID_SATURATION:
990 ctrl->value = state->sat;
994 ctrl->value = state->hue;
997 case V4L2_CID_AUDIO_MUTE:
998 ctrl->value = state->audio_main_mute;
1001 case V4L2_CID_AUDIO_VOLUME:
1002 ctrl->value = state->audio_main_volume;
1005 case V4L2_CID_AUDIO_BALANCE:
1006 ctrl->value = state->audio_main_balance;
1009 case V4L2_CID_AUDIO_TREBLE:
1010 ctrl->value = state->audio_main_treble;
1013 case V4L2_CID_AUDIO_BASS:
1014 ctrl->value = state->audio_main_bass;
1024 static struct v4l2_queryctrl saa717x_qctrl[] = {
1026 .id = V4L2_CID_BRIGHTNESS,
1027 .type = V4L2_CTRL_TYPE_INTEGER,
1028 .name = "Brightness",
1032 .default_value = 128,
1035 .id = V4L2_CID_CONTRAST,
1036 .type = V4L2_CTRL_TYPE_INTEGER,
1041 .default_value = 64,
1044 .id = V4L2_CID_SATURATION,
1045 .type = V4L2_CTRL_TYPE_INTEGER,
1046 .name = "Saturation",
1050 .default_value = 64,
1054 .type = V4L2_CTRL_TYPE_INTEGER,
1062 .id = V4L2_CID_AUDIO_VOLUME,
1063 .type = V4L2_CTRL_TYPE_INTEGER,
1067 .step = 65535 / 100,
1068 .default_value = 58880,
1071 .id = V4L2_CID_AUDIO_BALANCE,
1072 .type = V4L2_CTRL_TYPE_INTEGER,
1076 .step = 65535 / 100,
1077 .default_value = 32768,
1080 .id = V4L2_CID_AUDIO_MUTE,
1081 .type = V4L2_CTRL_TYPE_BOOLEAN,
1089 .id = V4L2_CID_AUDIO_BASS,
1090 .type = V4L2_CTRL_TYPE_INTEGER,
1094 .step = 65535 / 100,
1095 .default_value = 32768,
1097 .id = V4L2_CID_AUDIO_TREBLE,
1098 .type = V4L2_CTRL_TYPE_INTEGER,
1102 .step = 65535 / 100,
1103 .default_value = 32768,
1107 static int saa717x_set_video_input(struct i2c_client *client, struct saa717x_state *decoder, int inp)
1109 int is_tuner = inp & 0x80; /* tuner input flag */
1113 v4l_dbg(1, debug, client, "decoder set input (%d)\n", inp);
1114 /* inputs from 0-9 are available*/
1115 /* saa717x have mode0-mode9 but mode5 is reserved. */
1116 if (inp < 0 || inp > 9 || inp == 5)
1119 if (decoder->input != inp) {
1120 int input_line = inp;
1122 decoder->input = input_line;
1123 v4l_dbg(1, debug, client, "now setting %s input %d\n",
1124 input_line >= 6 ? "S-Video" : "Composite",
1128 saa717x_write(client, 0x102,
1129 (saa717x_read(client, 0x102) & 0xf0) |
1132 /* bypass chrominance trap for modes 6..9 */
1133 saa717x_write(client, 0x109,
1134 (saa717x_read(client, 0x109) & 0x7f) |
1135 (input_line < 6 ? 0x0 : 0x80));
1137 /* change audio_mode */
1140 set_audio_mode(client, decoder->tuner_audio_mode);
1142 /* Force to STEREO mode if Composite or
1143 * S-Video were chosen */
1144 set_audio_mode(client, TUNER_AUDIO_STEREO);
1146 /* change initialize procedure (Composite/S-Video) */
1148 saa717x_write_regs(client, reg_init_tuner_input);
1149 else if (input_line >= 6)
1150 saa717x_write_regs(client, reg_init_svideo_input);
1152 saa717x_write_regs(client, reg_init_composite_input);
1158 static int saa717x_command(struct i2c_client *client, unsigned cmd, void *arg)
1160 struct saa717x_state *decoder = i2c_get_clientdata(client);
1162 v4l_dbg(1, debug, client, "IOCTL: %08x\n", cmd);
1165 case VIDIOC_INT_AUDIO_CLOCK_FREQ:
1166 return saa717x_set_audio_clock_freq(client, *(u32 *)arg);
1169 return saa717x_get_v4lctrl(client, (struct v4l2_control *)arg);
1172 return saa717x_set_v4lctrl(client, (struct v4l2_control *)arg);
1174 case VIDIOC_QUERYCTRL: {
1175 struct v4l2_queryctrl *qc = arg;
1178 for (i = 0; i < ARRAY_SIZE(saa717x_qctrl); i++)
1179 if (qc->id && qc->id == saa717x_qctrl[i].id) {
1180 memcpy(qc, &saa717x_qctrl[i], sizeof(*qc));
1186 #ifdef CONFIG_VIDEO_ADV_DEBUG
1187 case VIDIOC_DBG_G_REGISTER: {
1188 struct v4l2_register *reg = arg;
1190 if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip))
1192 if (!capable(CAP_SYS_ADMIN))
1194 reg->val = saa717x_read(client, reg->reg);
1198 case VIDIOC_DBG_S_REGISTER: {
1199 struct v4l2_register *reg = arg;
1200 u16 addr = reg->reg & 0xffff;
1201 u8 val = reg->val & 0xff;
1203 if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip))
1205 if (!capable(CAP_SYS_ADMIN))
1207 saa717x_write(client, addr, val);
1212 case VIDIOC_S_FMT: {
1213 struct v4l2_format *fmt = (struct v4l2_format *)arg;
1214 struct v4l2_pix_format *pix;
1215 int prescale, h_scale, v_scale;
1217 pix = &fmt->fmt.pix;
1218 v4l_dbg(1, debug, client, "decoder set size\n");
1220 /* FIXME need better bounds checking here */
1221 if (pix->width < 1 || pix->width > 1440)
1223 if (pix->height < 1 || pix->height > 960)
1226 /* scaling setting */
1227 /* NTSC and interlace only */
1228 prescale = SAA717X_NTSC_WIDTH / pix->width;
1231 h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / pix->width;
1233 v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / pix->height;
1235 /* Horizontal prescaling etc */
1236 set_h_prescale(client, 0, prescale);
1237 set_h_prescale(client, 1, prescale);
1239 /* Horizontal scaling increment */
1241 saa717x_write(client, 0x6C, (u8)(h_scale & 0xFF));
1242 saa717x_write(client, 0x6D, (u8)((h_scale >> 8) & 0xFF));
1244 saa717x_write(client, 0xAC, (u8)(h_scale & 0xFF));
1245 saa717x_write(client, 0xAD, (u8)((h_scale >> 8) & 0xFF));
1247 /* Vertical prescaling etc */
1248 set_v_scale(client, 0, v_scale);
1249 set_v_scale(client, 1, v_scale);
1251 /* set video output size */
1252 /* video number of pixels at output */
1254 saa717x_write(client, 0x5C, (u8)(pix->width & 0xFF));
1255 saa717x_write(client, 0x5D, (u8)((pix->width >> 8) & 0xFF));
1257 saa717x_write(client, 0x9C, (u8)(pix->width & 0xFF));
1258 saa717x_write(client, 0x9D, (u8)((pix->width >> 8) & 0xFF));
1260 /* video number of lines at output */
1262 saa717x_write(client, 0x5E, (u8)(pix->height & 0xFF));
1263 saa717x_write(client, 0x5F, (u8)((pix->height >> 8) & 0xFF));
1265 saa717x_write(client, 0x9E, (u8)(pix->height & 0xFF));
1266 saa717x_write(client, 0x9F, (u8)((pix->height >> 8) & 0xFF));
1270 case AUDC_SET_RADIO:
1274 case VIDIOC_S_STD: {
1275 v4l2_std_id std = *(v4l2_std_id *) arg;
1277 v4l_dbg(1, debug, client, "decoder set norm ");
1278 v4l_dbg(1, debug, client, "(not yet implementd)\n");
1285 case VIDIOC_INT_G_AUDIO_ROUTING: {
1286 struct v4l2_routing *route = arg;
1288 route->input = decoder->audio_input;
1293 case VIDIOC_INT_S_AUDIO_ROUTING: {
1294 struct v4l2_routing *route = arg;
1296 if (route->input < 3) { /* FIXME! --tadachi */
1297 decoder->audio_input = route->input;
1298 v4l_dbg(1, debug, client,
1299 "set decoder audio input to %d\n",
1300 decoder->audio_input);
1301 set_audio_regs(client, decoder);
1307 case VIDIOC_INT_S_VIDEO_ROUTING: {
1308 struct v4l2_routing *route = arg;
1309 int inp = route->input;
1311 return saa717x_set_video_input(client, decoder, inp);
1314 case VIDIOC_STREAMON: {
1315 v4l_dbg(1, debug, client, "decoder enable output\n");
1316 decoder->enable = 1;
1317 saa717x_write(client, 0x193, 0xa6);
1321 case VIDIOC_STREAMOFF: {
1322 v4l_dbg(1, debug, client, "decoder disable output\n");
1323 decoder->enable = 0;
1324 saa717x_write(client, 0x193, 0x26); /* right? FIXME!--tadachi */
1328 /* change audio mode */
1329 case VIDIOC_S_TUNER: {
1330 struct v4l2_tuner *vt = (struct v4l2_tuner *)arg;
1333 "MONO", "STEREO", "LANG1", "LANG2/SAP"
1336 audio_mode = V4L2_TUNER_MODE_STEREO;
1338 switch (vt->audmode) {
1339 case V4L2_TUNER_MODE_MONO:
1340 audio_mode = TUNER_AUDIO_MONO;
1342 case V4L2_TUNER_MODE_STEREO:
1343 audio_mode = TUNER_AUDIO_STEREO;
1345 case V4L2_TUNER_MODE_LANG2:
1346 audio_mode = TUNER_AUDIO_LANG2;
1348 case V4L2_TUNER_MODE_LANG1:
1349 audio_mode = TUNER_AUDIO_LANG1;
1353 v4l_dbg(1, debug, client, "change audio mode to %s\n",
1355 decoder->tuner_audio_mode = audio_mode;
1356 /* The registers are not changed here. */
1357 /* See DECODER_ENABLE_OUTPUT section. */
1358 set_audio_mode(client, decoder->tuner_audio_mode);
1362 case VIDIOC_G_TUNER: {
1363 struct v4l2_tuner *vt = (struct v4l2_tuner *)arg;
1364 int dual_f, stereo_f;
1368 get_inf_dev_status(client, &dual_f, &stereo_f);
1370 v4l_dbg(1, debug, client, "DETECT==st:%d dual:%d\n",
1374 if ((dual_f == 0) && (stereo_f == 0)) {
1375 vt->rxsubchans = V4L2_TUNER_SUB_MONO;
1376 v4l_dbg(1, debug, client, "DETECT==MONO\n");
1380 if (stereo_f == 1) {
1381 if (vt->audmode == V4L2_TUNER_MODE_STEREO ||
1382 vt->audmode == V4L2_TUNER_MODE_LANG1) {
1383 vt->rxsubchans = V4L2_TUNER_SUB_STEREO;
1384 v4l_dbg(1, debug, client, "DETECT==ST(ST)\n");
1386 vt->rxsubchans = V4L2_TUNER_SUB_MONO;
1387 v4l_dbg(1, debug, client, "DETECT==ST(MONO)\n");
1393 if (vt->audmode == V4L2_TUNER_MODE_LANG2) {
1394 vt->rxsubchans = V4L2_TUNER_SUB_LANG2 | V4L2_TUNER_SUB_MONO;
1395 v4l_dbg(1, debug, client, "DETECT==DUAL1\n");
1397 vt->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_MONO;
1398 v4l_dbg(1, debug, client, "DETECT==DUAL2\n");
1404 case VIDIOC_LOG_STATUS:
1405 /* not yet implemented */
1415 /* ----------------------------------------------------------------------- */
1418 /* i2c implementation */
1420 /* ----------------------------------------------------------------------- */
1421 static int saa717x_probe(struct i2c_client *client,
1422 const struct i2c_device_id *did)
1424 struct saa717x_state *decoder;
1428 /* Check if the adapter supports the needed features */
1429 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1432 if (saa717x_write(client, 0x5a4, 0xfe) &&
1433 saa717x_write(client, 0x5a5, 0x0f) &&
1434 saa717x_write(client, 0x5a6, 0x00) &&
1435 saa717x_write(client, 0x5a7, 0x01))
1436 id = saa717x_read(client, 0x5a0);
1437 if (id != 0xc2 && id != 0x32 && id != 0xf2 && id != 0x6c) {
1438 v4l_dbg(1, debug, client, "saa717x not found (id=%02x)\n", id);
1443 else if (id == 0x32)
1445 else if (id == 0x6c)
1449 v4l_info(client, "%s found @ 0x%x (%s)\n", p,
1450 client->addr << 1, client->adapter->name);
1452 decoder = kzalloc(sizeof(struct saa717x_state), GFP_KERNEL);
1453 i2c_set_clientdata(client, decoder);
1455 if (decoder == NULL)
1457 decoder->std = V4L2_STD_NTSC;
1458 decoder->input = -1;
1459 decoder->enable = 1;
1461 /* tune these parameters */
1462 decoder->bright = 0x80;
1463 decoder->contrast = 0x44;
1464 decoder->sat = 0x40;
1465 decoder->hue = 0x00;
1468 decoder->playback = 0; /* initially capture mode used */
1469 decoder->audio = 1; /* DECODER_AUDIO_48_KHZ */
1471 decoder->audio_input = 2; /* FIXME!! */
1473 decoder->tuner_audio_mode = TUNER_AUDIO_STEREO;
1474 /* set volume, bass and treble */
1475 decoder->audio_main_vol_l = 6;
1476 decoder->audio_main_vol_r = 6;
1477 decoder->audio_main_bass = 0;
1478 decoder->audio_main_treble = 0;
1479 decoder->audio_main_mute = 0;
1480 decoder->audio_main_balance = 32768;
1481 /* normalize (24 to -40 (not -84) -> 65535 to 0) */
1482 decoder->audio_main_volume =
1483 (decoder->audio_main_vol_r + 41) * 65535 / (24 - (-40));
1485 v4l_dbg(1, debug, client, "writing init values\n");
1488 saa717x_write_regs(client, reg_init_initialize);
1489 set_video_output_level_regs(client, decoder);
1490 /* set bass,treble to 0db 20041101 K.Ohta */
1491 decoder->audio_main_bass = 0;
1492 decoder->audio_main_treble = 0;
1493 set_audio_regs(client, decoder);
1495 set_current_state(TASK_INTERRUPTIBLE);
1496 schedule_timeout(2*HZ);
1500 static int saa717x_remove(struct i2c_client *client)
1502 kfree(i2c_get_clientdata(client));
1506 /* ----------------------------------------------------------------------- */
1508 static const struct i2c_device_id saa717x_id[] = {
1512 MODULE_DEVICE_TABLE(i2c, saa717x_id);
1514 static struct v4l2_i2c_driver_data v4l2_i2c_data = {
1516 .driverid = I2C_DRIVERID_SAA717X,
1517 .command = saa717x_command,
1518 .probe = saa717x_probe,
1519 .remove = saa717x_remove,
1520 .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
1521 .id_table = saa717x_id,