git.oblomov.eu Git - linux-2.6/blob - drivers/net/irda/sir_dev.c

   1 /*********************************************************************
   2  *
   3  *      sir_dev.c:      irda sir network device
   4  *
   5  *      Copyright (c) 2002 Martin Diehl
   6  *
   7  *      This program is free software; you can redistribute it and/or
   8  *      modify it under the terms of the GNU General Public License as
   9  *      published by the Free Software Foundation; either version 2 of
  10  *      the License, or (at your option) any later version.
  11  *
  12  ********************************************************************/
  13
  14 #include <linux/module.h>
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/delay.h>
  18
  19 #include <net/irda/irda.h>
  20 #include <net/irda/wrapper.h>
  21 #include <net/irda/irda_device.h>
  22
  23 #include "sir-dev.h"
  24
  25
  26 static struct workqueue_struct *irda_sir_wq;
  27
  28 /* STATE MACHINE */
  29
  30 /* substate handler of the config-fsm to handle the cases where we want
  31  * to wait for transmit completion before changing the port configuration
  32  */
  33
  34 static int sirdev_tx_complete_fsm(struct sir_dev *dev)
  35 {
  36         struct sir_fsm *fsm = &dev->fsm;
  37         unsigned next_state, delay;
  38         unsigned bytes_left;
  39
  40         do {
  41                 next_state = fsm->substate;     /* default: stay in current substate */
  42                 delay = 0;
  43
  44                 switch(fsm->substate) {
  45
  46                 case SIRDEV_STATE_WAIT_XMIT:
  47                         if (dev->drv->chars_in_buffer)
  48                                 bytes_left = dev->drv->chars_in_buffer(dev);
  49                         else
  50                                 bytes_left = 0;
  51                         if (!bytes_left) {
  52                                 next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
  53                                 break;
  54                         }
  55
  56                         if (dev->speed > 115200)
  57                                 delay = (bytes_left*8*10000) / (dev->speed/100);
  58                         else if (dev->speed > 0)
  59                                 delay = (bytes_left*10*10000) / (dev->speed/100);
  60                         else
  61                                 delay = 0;
  62                         /* expected delay (usec) until remaining bytes are sent */
  63                         if (delay < 100) {
  64                                 udelay(delay);
  65                                 delay = 0;
  66                                 break;
  67                         }
  68                         /* sleep some longer delay (msec) */
  69                         delay = (delay+999) / 1000;
  70                         break;
  71
  72                 case SIRDEV_STATE_WAIT_UNTIL_SENT:
  73                         /* block until underlaying hardware buffer are empty */
  74                         if (dev->drv->wait_until_sent)
  75                                 dev->drv->wait_until_sent(dev);
  76                         next_state = SIRDEV_STATE_TX_DONE;
  77                         break;
  78
  79                 case SIRDEV_STATE_TX_DONE:
  80                         return 0;
  81
  82                 default:
  83                         IRDA_ERROR("%s - undefined state\n", __func__);
  84                         return -EINVAL;
  85                 }
  86                 fsm->substate = next_state;
  87         } while (delay == 0);
  88         return delay;
  89 }
  90
  91 /*
  92  * Function sirdev_config_fsm
  93  *
  94  * State machine to handle the configuration of the device (and attached dongle, if any).
  95  * This handler is scheduled for execution in kIrDAd context, so we can sleep.
  96  * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
  97  * long. Instead, for longer delays we start a timer to reschedule us later.
  98  * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
  99  * Both must be unlocked/restarted on completion - but only on final exit.
 100  */
 101
 102 static void sirdev_config_fsm(struct work_struct *work)
 103 {
 104         struct sir_dev *dev = container_of(work, struct sir_dev, fsm.work.work);
 105         struct sir_fsm *fsm = &dev->fsm;
 106         int next_state;
 107         int ret = -1;
 108         unsigned delay;
 109
 110         IRDA_DEBUG(2, "%s(), <%ld>\n", __func__, jiffies);
 111
 112         do {
 113                 IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
 114                         __func__, fsm->state, fsm->substate);
 115
 116                 next_state = fsm->state;
 117                 delay = 0;
 118
 119                 switch(fsm->state) {
 120
 121                 case SIRDEV_STATE_DONGLE_OPEN:
 122                         if (dev->dongle_drv != NULL) {
 123                                 ret = sirdev_put_dongle(dev);
 124                                 if (ret) {
 125                                         fsm->result = -EINVAL;
 126                                         next_state = SIRDEV_STATE_ERROR;
 127                                         break;
 128                                 }
 129                         }
 130
 131                         /* Initialize dongle */
 132                         ret = sirdev_get_dongle(dev, fsm->param);
 133                         if (ret) {
 134                                 fsm->result = ret;
 135                                 next_state = SIRDEV_STATE_ERROR;
 136                                 break;
 137                         }
 138
 139                         /* Dongles are powered through the modem control lines which
 140                          * were just set during open. Before resetting, let's wait for
 141                          * the power to stabilize. This is what some dongle drivers did
 142                          * in open before, while others didn't - should be safe anyway.
 143                          */
 144
 145                         delay = 50;
 146                         fsm->substate = SIRDEV_STATE_DONGLE_RESET;
 147                         next_state = SIRDEV_STATE_DONGLE_RESET;
 148
 149                         fsm->param = 9600;
 150
 151                         break;
 152
 153                 case SIRDEV_STATE_DONGLE_CLOSE:
 154                         /* shouldn't we just treat this as success=? */
 155                         if (dev->dongle_drv == NULL) {
 156                                 fsm->result = -EINVAL;
 157                                 next_state = SIRDEV_STATE_ERROR;
 158                                 break;
 159                         }
 160
 161                         ret = sirdev_put_dongle(dev);
 162                         if (ret) {
 163                                 fsm->result = ret;
 164                                 next_state = SIRDEV_STATE_ERROR;
 165                                 break;
 166                         }
 167                         next_state = SIRDEV_STATE_DONE;
 168                         break;
 169
 170                 case SIRDEV_STATE_SET_DTR_RTS:
 171                         ret = sirdev_set_dtr_rts(dev,
 172                                 (fsm->param&0x02) ? TRUE : FALSE,
 173                                 (fsm->param&0x01) ? TRUE : FALSE);
 174                         next_state = SIRDEV_STATE_DONE;
 175                         break;
 176
 177                 case SIRDEV_STATE_SET_SPEED:
 178                         fsm->substate = SIRDEV_STATE_WAIT_XMIT;
 179                         next_state = SIRDEV_STATE_DONGLE_CHECK;
 180                         break;
 181
 182                 case SIRDEV_STATE_DONGLE_CHECK:
 183                         ret = sirdev_tx_complete_fsm(dev);
 184                         if (ret < 0) {
 185                                 fsm->result = ret;
 186                                 next_state = SIRDEV_STATE_ERROR;
 187                                 break;
 188                         }
 189                         if ((delay=ret) != 0)
 190                                 break;
 191
 192                         if (dev->dongle_drv) {
 193                                 fsm->substate = SIRDEV_STATE_DONGLE_RESET;
 194                                 next_state = SIRDEV_STATE_DONGLE_RESET;
 195                         }
 196                         else {
 197                                 dev->speed = fsm->param;
 198                                 next_state = SIRDEV_STATE_PORT_SPEED;
 199                         }
 200                         break;
 201
 202                 case SIRDEV_STATE_DONGLE_RESET:
 203                         if (dev->dongle_drv->reset) {
 204                                 ret = dev->dongle_drv->reset(dev);
 205                                 if (ret < 0) {
 206                                         fsm->result = ret;
 207                                         next_state = SIRDEV_STATE_ERROR;
 208                                         break;
 209                                 }
 210                         }
 211                         else
 212                                 ret = 0;
 213                         if ((delay=ret) == 0) {
 214                                 /* set serial port according to dongle default speed */
 215                                 if (dev->drv->set_speed)
 216                                         dev->drv->set_speed(dev, dev->speed);
 217                                 fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
 218                                 next_state = SIRDEV_STATE_DONGLE_SPEED;
 219                         }
 220                         break;
 221
 222                 case SIRDEV_STATE_DONGLE_SPEED:
 223                         if (dev->dongle_drv->reset) {
 224                                 ret = dev->dongle_drv->set_speed(dev, fsm->param);
 225                                 if (ret < 0) {
 226                                         fsm->result = ret;
 227                                         next_state = SIRDEV_STATE_ERROR;
 228                                         break;
 229                                 }
 230                         }
 231                         else
 232                                 ret = 0;
 233                         if ((delay=ret) == 0)
 234                                 next_state = SIRDEV_STATE_PORT_SPEED;
 235                         break;
 236
 237                 case SIRDEV_STATE_PORT_SPEED:
 238                         /* Finally we are ready to change the serial port speed */
 239                         if (dev->drv->set_speed)
 240                                 dev->drv->set_speed(dev, dev->speed);
 241                         dev->new_speed = 0;
 242                         next_state = SIRDEV_STATE_DONE;
 243                         break;
 244
 245                 case SIRDEV_STATE_DONE:
 246                         /* Signal network layer so it can send more frames */
 247                         netif_wake_queue(dev->netdev);
 248                         next_state = SIRDEV_STATE_COMPLETE;
 249                         break;
 250
 251                 default:
 252                         IRDA_ERROR("%s - undefined state\n", __func__);
 253                         fsm->result = -EINVAL;
 254                         /* fall thru */
 255
 256                 case SIRDEV_STATE_ERROR:
 257                         IRDA_ERROR("%s - error: %d\n", __func__, fsm->result);
 258
 259 #if 0   /* don't enable this before we have netdev->tx_timeout to recover */
 260                         netif_stop_queue(dev->netdev);
 261 #else
 262                         netif_wake_queue(dev->netdev);
 263 #endif
 264                         /* fall thru */
 265
 266                 case SIRDEV_STATE_COMPLETE:
 267                         /* config change finished, so we are not busy any longer */
 268                         sirdev_enable_rx(dev);
 269                         up(&fsm->sem);
 270                         return;
 271                 }
 272                 fsm->state = next_state;
 273         } while(!delay);
 274
 275         queue_delayed_work(irda_sir_wq, &fsm->work, msecs_to_jiffies(delay));
 276 }
 277
 278 /* schedule some device configuration task for execution by kIrDAd
 279  * on behalf of the above state machine.
 280  * can be called from process or interrupt/tasklet context.
 281  */
 282
 283 int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
 284 {
 285         struct sir_fsm *fsm = &dev->fsm;
 286
 287         IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __func__,
 288                         initial_state, param);
 289
 290         if (down_trylock(&fsm->sem)) {
 291                 if (in_interrupt()  ||  in_atomic()  ||  irqs_disabled()) {
 292                         IRDA_DEBUG(1, "%s(), state machine busy!\n", __func__);
 293                         return -EWOULDBLOCK;
 294                 } else
 295                         down(&fsm->sem);
 296         }
 297
 298         if (fsm->state == SIRDEV_STATE_DEAD) {
 299                 /* race with sirdev_close should never happen */
 300                 IRDA_ERROR("%s(), instance staled!\n", __func__);
 301                 up(&fsm->sem);
 302                 return -ESTALE;         /* or better EPIPE? */
 303         }
 304
 305         netif_stop_queue(dev->netdev);
 306         atomic_set(&dev->enable_rx, 0);
 307
 308         fsm->state = initial_state;
 309         fsm->param = param;
 310         fsm->result = 0;
 311
 312         INIT_DELAYED_WORK(&fsm->work, sirdev_config_fsm);
 313         queue_delayed_work(irda_sir_wq, &fsm->work, 0);
 314         return 0;
 315 }
 316
 317
 318 /***************************************************************************/
 319
 320 void sirdev_enable_rx(struct sir_dev *dev)
 321 {
 322         if (unlikely(atomic_read(&dev->enable_rx)))
 323                 return;
 324
 325         /* flush rx-buffer - should also help in case of problems with echo cancelation */
 326         dev->rx_buff.data = dev->rx_buff.head;
 327         dev->rx_buff.len = 0;
 328         dev->rx_buff.in_frame = FALSE;
 329         dev->rx_buff.state = OUTSIDE_FRAME;
 330         atomic_set(&dev->enable_rx, 1);
 331 }
 332
 333 static int sirdev_is_receiving(struct sir_dev *dev)
 334 {
 335         if (!atomic_read(&dev->enable_rx))
 336                 return 0;
 337
 338         return (dev->rx_buff.state != OUTSIDE_FRAME);
 339 }
 340
 341 int sirdev_set_dongle(struct sir_dev *dev, IRDA_DONGLE type)
 342 {
 343         int err;
 344
 345         IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __func__, type);
 346
 347         err = sirdev_schedule_dongle_open(dev, type);
 348         if (unlikely(err))
 349                 return err;
 350         down(&dev->fsm.sem);            /* block until config change completed */
 351         err = dev->fsm.result;
 352         up(&dev->fsm.sem);
 353         return err;
 354 }
 355 EXPORT_SYMBOL(sirdev_set_dongle);
 356
 357 /* used by dongle drivers for dongle programming */
 358
 359 int sirdev_raw_write(struct sir_dev *dev, const char *buf, int len)
 360 {
 361         unsigned long flags;
 362         int ret;
 363
 364         if (unlikely(len > dev->tx_buff.truesize))
 365                 return -ENOSPC;
 366
 367         spin_lock_irqsave(&dev->tx_lock, flags);        /* serialize with other tx operations */
 368         while (dev->tx_buff.len > 0) {                  /* wait until tx idle */
 369                 spin_unlock_irqrestore(&dev->tx_lock, flags);
 370                 msleep(10);
 371                 spin_lock_irqsave(&dev->tx_lock, flags);
 372         }
 373
 374         dev->tx_buff.data = dev->tx_buff.head;
 375         memcpy(dev->tx_buff.data, buf, len);
 376         dev->tx_buff.len = len;
 377
 378         ret = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
 379         if (ret > 0) {
 380                 IRDA_DEBUG(3, "%s(), raw-tx started\n", __func__);
 381
 382                 dev->tx_buff.data += ret;
 383                 dev->tx_buff.len -= ret;
 384                 dev->raw_tx = 1;
 385                 ret = len;              /* all data is going to be sent */
 386         }
 387         spin_unlock_irqrestore(&dev->tx_lock, flags);
 388         return ret;
 389 }
 390 EXPORT_SYMBOL(sirdev_raw_write);
 391
 392 /* seems some dongle drivers may need this */
 393
 394 int sirdev_raw_read(struct sir_dev *dev, char *buf, int len)
 395 {
 396         int count;
 397
 398         if (atomic_read(&dev->enable_rx))
 399                 return -EIO;            /* fail if we expect irda-frames */
 400
 401         count = (len < dev->rx_buff.len) ? len : dev->rx_buff.len;
 402
 403         if (count > 0) {
 404                 memcpy(buf, dev->rx_buff.data, count);
 405                 dev->rx_buff.data += count;
 406                 dev->rx_buff.len -= count;
 407         }
 408
 409         /* remaining stuff gets flushed when re-enabling normal rx */
 410
 411         return count;
 412 }
 413 EXPORT_SYMBOL(sirdev_raw_read);
 414
 415 int sirdev_set_dtr_rts(struct sir_dev *dev, int dtr, int rts)
 416 {
 417         int ret = -ENXIO;
 418         if (dev->drv->set_dtr_rts)
 419                 ret =  dev->drv->set_dtr_rts(dev, dtr, rts);
 420         return ret;
 421 }
 422 EXPORT_SYMBOL(sirdev_set_dtr_rts);
 423
 424 /**********************************************************************/
 425
 426 /* called from client driver - likely with bh-context - to indicate
 427  * it made some progress with transmission. Hence we send the next
 428  * chunk, if any, or complete the skb otherwise
 429  */
 430
 431 void sirdev_write_complete(struct sir_dev *dev)
 432 {
 433         unsigned long flags;
 434         struct sk_buff *skb;
 435         int actual = 0;
 436         int err;
 437
 438         spin_lock_irqsave(&dev->tx_lock, flags);
 439
 440         IRDA_DEBUG(3, "%s() - dev->tx_buff.len = %d\n",
 441                    __func__, dev->tx_buff.len);
 442
 443         if (likely(dev->tx_buff.len > 0))  {
 444                 /* Write data left in transmit buffer */
 445                 actual = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
 446
 447                 if (likely(actual>0)) {
 448                         dev->tx_buff.data += actual;
 449                         dev->tx_buff.len  -= actual;
 450                 }
 451                 else if (unlikely(actual<0)) {
 452                         /* could be dropped later when we have tx_timeout to recover */
 453                         IRDA_ERROR("%s: drv->do_write failed (%d)\n",
 454                                    __func__, actual);
 455                         if ((skb=dev->tx_skb) != NULL) {
 456                                 dev->tx_skb = NULL;
 457                                 dev_kfree_skb_any(skb);
 458                                 dev->netdev->stats.tx_errors++;
 459                                 dev->netdev->stats.tx_dropped++;
 460                         }
 461                         dev->tx_buff.len = 0;
 462                 }
 463                 if (dev->tx_buff.len > 0)
 464                         goto done;      /* more data to send later */
 465         }
 466
 467         if (unlikely(dev->raw_tx != 0)) {
 468                 /* in raw mode we are just done now after the buffer was sent
 469                  * completely. Since this was requested by some dongle driver
 470                  * running under the control of the irda-thread we must take
 471                  * care here not to re-enable the queue. The queue will be
 472                  * restarted when the irda-thread has completed the request.
 473                  */
 474
 475                 IRDA_DEBUG(3, "%s(), raw-tx done\n", __func__);
 476                 dev->raw_tx = 0;
 477                 goto done;      /* no post-frame handling in raw mode */
 478         }
 479
 480         /* we have finished now sending this skb.
 481          * update statistics and free the skb.
 482          * finally we check and trigger a pending speed change, if any.
 483          * if not we switch to rx mode and wake the queue for further
 484          * packets.
 485          * note the scheduled speed request blocks until the lower
 486          * client driver and the corresponding hardware has really
 487          * finished sending all data (xmit fifo drained f.e.)
 488          * before the speed change gets finally done and the queue
 489          * re-activated.
 490          */
 491
 492         IRDA_DEBUG(5, "%s(), finished with frame!\n", __func__);
 493
 494         if ((skb=dev->tx_skb) != NULL) {
 495                 dev->tx_skb = NULL;
 496                 dev->netdev->stats.tx_packets++;
 497                 dev->netdev->stats.tx_bytes += skb->len;
 498                 dev_kfree_skb_any(skb);
 499         }
 500
 501         if (unlikely(dev->new_speed > 0)) {
 502                 IRDA_DEBUG(5, "%s(), Changing speed!\n", __func__);
 503                 err = sirdev_schedule_speed(dev, dev->new_speed);
 504                 if (unlikely(err)) {
 505                         /* should never happen
 506                          * forget the speed change and hope the stack recovers
 507                          */
 508                         IRDA_ERROR("%s - schedule speed change failed: %d\n",
 509                                    __func__, err);
 510                         netif_wake_queue(dev->netdev);
 511                 }
 512                 /* else: success
 513                  *      speed change in progress now
 514                  *      on completion dev->new_speed gets cleared,
 515                  *      rx-reenabled and the queue restarted
 516                  */
 517         }
 518         else {
 519                 sirdev_enable_rx(dev);
 520                 netif_wake_queue(dev->netdev);
 521         }
 522
 523 done:
 524         spin_unlock_irqrestore(&dev->tx_lock, flags);
 525 }
 526 EXPORT_SYMBOL(sirdev_write_complete);
 527
 528 /* called from client driver - likely with bh-context - to give us
 529  * some more received bytes. We put them into the rx-buffer,
 530  * normally unwrapping and building LAP-skb's (unless rx disabled)
 531  */
 532
 533 int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count)
 534 {
 535         if (!dev || !dev->netdev) {
 536                 IRDA_WARNING("%s(), not ready yet!\n", __func__);
 537                 return -1;
 538         }
 539
 540         if (!dev->irlap) {
 541                 IRDA_WARNING("%s - too early: %p / %zd!\n",
 542                              __func__, cp, count);
 543                 return -1;
 544         }
 545
 546         if (cp==NULL) {
 547                 /* error already at lower level receive
 548                  * just update stats and set media busy
 549                  */
 550                 irda_device_set_media_busy(dev->netdev, TRUE);
 551                 dev->netdev->stats.rx_dropped++;
 552                 IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __func__, count);
 553                 return 0;
 554         }
 555
 556         /* Read the characters into the buffer */
 557         if (likely(atomic_read(&dev->enable_rx))) {
 558                 while (count--)
 559                         /* Unwrap and destuff one byte */
 560                         async_unwrap_char(dev->netdev, &dev->netdev->stats,
 561                                           &dev->rx_buff, *cp++);
 562         } else {
 563                 while (count--) {
 564                         /* rx not enabled: save the raw bytes and never
 565                          * trigger any netif_rx. The received bytes are flushed
 566                          * later when we re-enable rx but might be read meanwhile
 567                          * by the dongle driver.
 568                          */
 569                         dev->rx_buff.data[dev->rx_buff.len++] = *cp++;
 570
 571                         /* What should we do when the buffer is full? */
 572                         if (unlikely(dev->rx_buff.len == dev->rx_buff.truesize))
 573                                 dev->rx_buff.len = 0;
 574                 }
 575         }
 576
 577         return 0;
 578 }
 579 EXPORT_SYMBOL(sirdev_receive);
 580
 581 /**********************************************************************/
 582
 583 /* callbacks from network layer */
 584
 585 static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 586 {
 587         struct sir_dev *dev = netdev_priv(ndev);
 588         unsigned long flags;
 589         int actual = 0;
 590         int err;
 591         s32 speed;
 592
 593         IRDA_ASSERT(dev != NULL, return 0;);
 594
 595         netif_stop_queue(ndev);
 596
 597         IRDA_DEBUG(3, "%s(), skb->len = %d\n", __func__, skb->len);
 598
 599         speed = irda_get_next_speed(skb);
 600         if ((speed != dev->speed) && (speed != -1)) {
 601                 if (!skb->len) {
 602                         err = sirdev_schedule_speed(dev, speed);
 603                         if (unlikely(err == -EWOULDBLOCK)) {
 604                                 /* Failed to initiate the speed change, likely the fsm
 605                                  * is still busy (pretty unlikely, but...)
 606                                  * We refuse to accept the skb and return with the queue
 607                                  * stopped so the network layer will retry after the
 608                                  * fsm completes and wakes the queue.
 609                                  */
 610                                  return 1;
 611                         }
 612                         else if (unlikely(err)) {
 613                                 /* other fatal error - forget the speed change and
 614                                  * hope the stack will recover somehow
 615                                  */
 616                                  netif_start_queue(ndev);
 617                         }
 618                         /* else: success
 619                          *      speed change in progress now
 620                          *      on completion the queue gets restarted
 621                          */
 622
 623                         dev_kfree_skb_any(skb);
 624                         return 0;
 625                 } else
 626                         dev->new_speed = speed;
 627         }
 628
 629         /* Init tx buffer*/
 630         dev->tx_buff.data = dev->tx_buff.head;
 631
 632         /* Check problems */
 633         if(spin_is_locked(&dev->tx_lock)) {
 634                 IRDA_DEBUG(3, "%s(), write not completed\n", __func__);
 635         }
 636
 637         /* serialize with write completion */
 638         spin_lock_irqsave(&dev->tx_lock, flags);
 639
 640         /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
 641         dev->tx_buff.len = async_wrap_skb(skb, dev->tx_buff.data, dev->tx_buff.truesize);
 642
 643         /* transmission will start now - disable receive.
 644          * if we are just in the middle of an incoming frame,
 645          * treat it as collision. probably it's a good idea to
 646          * reset the rx_buf OUTSIDE_FRAME in this case too?
 647          */
 648         atomic_set(&dev->enable_rx, 0);
 649         if (unlikely(sirdev_is_receiving(dev)))
 650                 dev->netdev->stats.collisions++;
 651
 652         actual = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
 653
 654         if (likely(actual > 0)) {
 655                 dev->tx_skb = skb;
 656                 ndev->trans_start = jiffies;
 657                 dev->tx_buff.data += actual;
 658                 dev->tx_buff.len -= actual;
 659         }
 660         else if (unlikely(actual < 0)) {
 661                 /* could be dropped later when we have tx_timeout to recover */
 662                 IRDA_ERROR("%s: drv->do_write failed (%d)\n",
 663                            __func__, actual);
 664                 dev_kfree_skb_any(skb);
 665                 dev->netdev->stats.tx_errors++;
 666                 dev->netdev->stats.tx_dropped++;
 667                 netif_wake_queue(ndev);
 668         }
 669         spin_unlock_irqrestore(&dev->tx_lock, flags);
 670
 671         return 0;
 672 }
 673
 674 /* called from network layer with rtnl hold */
 675
 676 static int sirdev_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
 677 {
 678         struct if_irda_req *irq = (struct if_irda_req *) rq;
 679         struct sir_dev *dev = netdev_priv(ndev);
 680         int ret = 0;
 681
 682         IRDA_ASSERT(dev != NULL, return -1;);
 683
 684         IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd);
 685
 686         switch (cmd) {
 687         case SIOCSBANDWIDTH: /* Set bandwidth */
 688                 if (!capable(CAP_NET_ADMIN))
 689                         ret = -EPERM;
 690                 else
 691                         ret = sirdev_schedule_speed(dev, irq->ifr_baudrate);
 692                 /* cannot sleep here for completion
 693                  * we are called from network layer with rtnl hold
 694                  */
 695                 break;
 696
 697         case SIOCSDONGLE: /* Set dongle */
 698                 if (!capable(CAP_NET_ADMIN))
 699                         ret = -EPERM;
 700                 else
 701                         ret = sirdev_schedule_dongle_open(dev, irq->ifr_dongle);
 702                 /* cannot sleep here for completion
 703                  * we are called from network layer with rtnl hold
 704                  */
 705                 break;
 706
 707         case SIOCSMEDIABUSY: /* Set media busy */
 708                 if (!capable(CAP_NET_ADMIN))
 709                         ret = -EPERM;
 710                 else
 711                         irda_device_set_media_busy(dev->netdev, TRUE);
 712                 break;
 713
 714         case SIOCGRECEIVING: /* Check if we are receiving right now */
 715                 irq->ifr_receiving = sirdev_is_receiving(dev);
 716                 break;
 717
 718         case SIOCSDTRRTS:
 719                 if (!capable(CAP_NET_ADMIN))
 720                         ret = -EPERM;
 721                 else
 722                         ret = sirdev_schedule_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
 723                 /* cannot sleep here for completion
 724                  * we are called from network layer with rtnl hold
 725                  */
 726                 break;
 727
 728         case SIOCSMODE:
 729 #if 0
 730                 if (!capable(CAP_NET_ADMIN))
 731                         ret = -EPERM;
 732                 else
 733                         ret = sirdev_schedule_mode(dev, irq->ifr_mode);
 734                 /* cannot sleep here for completion
 735                  * we are called from network layer with rtnl hold
 736                  */
 737                 break;
 738 #endif
 739         default:
 740                 ret = -EOPNOTSUPP;
 741         }
 742
 743         return ret;
 744 }
 745
 746 /* ----------------------------------------------------------------------------- */
 747
 748 #define SIRBUF_ALLOCSIZE 4269   /* worst case size of a wrapped IrLAP frame */
 749
 750 static int sirdev_alloc_buffers(struct sir_dev *dev)
 751 {
 752         dev->tx_buff.truesize = SIRBUF_ALLOCSIZE;
 753         dev->rx_buff.truesize = IRDA_SKB_MAX_MTU;
 754
 755         /* Bootstrap ZeroCopy Rx */
 756         dev->rx_buff.skb = __dev_alloc_skb(dev->rx_buff.truesize, GFP_KERNEL);
 757         if (dev->rx_buff.skb == NULL)
 758                 return -ENOMEM;
 759         skb_reserve(dev->rx_buff.skb, 1);
 760         dev->rx_buff.head = dev->rx_buff.skb->data;
 761
 762         dev->tx_buff.head = kmalloc(dev->tx_buff.truesize, GFP_KERNEL);
 763         if (dev->tx_buff.head == NULL) {
 764                 kfree_skb(dev->rx_buff.skb);
 765                 dev->rx_buff.skb = NULL;
 766                 dev->rx_buff.head = NULL;
 767                 return -ENOMEM;
 768         }
 769
 770         dev->tx_buff.data = dev->tx_buff.head;
 771         dev->rx_buff.data = dev->rx_buff.head;
 772         dev->tx_buff.len = 0;
 773         dev->rx_buff.len = 0;
 774
 775         dev->rx_buff.in_frame = FALSE;
 776         dev->rx_buff.state = OUTSIDE_FRAME;
 777         return 0;
 778 };
 779
 780 static void sirdev_free_buffers(struct sir_dev *dev)
 781 {
 782         if (dev->rx_buff.skb)
 783                 kfree_skb(dev->rx_buff.skb);
 784         kfree(dev->tx_buff.head);
 785         dev->rx_buff.head = dev->tx_buff.head = NULL;
 786         dev->rx_buff.skb = NULL;
 787 }
 788
 789 static int sirdev_open(struct net_device *ndev)
 790 {
 791         struct sir_dev *dev = netdev_priv(ndev);
 792         const struct sir_driver *drv = dev->drv;
 793
 794         if (!drv)
 795                 return -ENODEV;
 796
 797         /* increase the reference count of the driver module before doing serious stuff */
 798         if (!try_module_get(drv->owner))
 799                 return -ESTALE;
 800
 801         IRDA_DEBUG(2, "%s()\n", __func__);
 802
 803         if (sirdev_alloc_buffers(dev))
 804                 goto errout_dec;
 805
 806         if (!dev->drv->start_dev  ||  dev->drv->start_dev(dev))
 807                 goto errout_free;
 808
 809         sirdev_enable_rx(dev);
 810         dev->raw_tx = 0;
 811
 812         netif_start_queue(ndev);
 813         dev->irlap = irlap_open(ndev, &dev->qos, dev->hwname);
 814         if (!dev->irlap)
 815                 goto errout_stop;
 816
 817         netif_wake_queue(ndev);
 818
 819         IRDA_DEBUG(2, "%s - done, speed = %d\n", __func__, dev->speed);
 820
 821         return 0;
 822
 823 errout_stop:
 824         atomic_set(&dev->enable_rx, 0);
 825         if (dev->drv->stop_dev)
 826                 dev->drv->stop_dev(dev);
 827 errout_free:
 828         sirdev_free_buffers(dev);
 829 errout_dec:
 830         module_put(drv->owner);
 831         return -EAGAIN;
 832 }
 833
 834 static int sirdev_close(struct net_device *ndev)
 835 {
 836         struct sir_dev *dev = netdev_priv(ndev);
 837         const struct sir_driver *drv;
 838
 839 //      IRDA_DEBUG(0, "%s\n", __func__);
 840
 841         netif_stop_queue(ndev);
 842
 843         down(&dev->fsm.sem);            /* block on pending config completion */
 844
 845         atomic_set(&dev->enable_rx, 0);
 846
 847         if (unlikely(!dev->irlap))
 848                 goto out;
 849         irlap_close(dev->irlap);
 850         dev->irlap = NULL;
 851
 852         drv = dev->drv;
 853         if (unlikely(!drv  ||  !dev->priv))
 854                 goto out;
 855
 856         if (drv->stop_dev)
 857                 drv->stop_dev(dev);
 858
 859         sirdev_free_buffers(dev);
 860         module_put(drv->owner);
 861
 862 out:
 863         dev->speed = 0;
 864         up(&dev->fsm.sem);
 865         return 0;
 866 }
 867
 868 /* ----------------------------------------------------------------------------- */
 869
 870 struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *name)
 871 {
 872         struct net_device *ndev;
 873         struct sir_dev *dev;
 874
 875         IRDA_DEBUG(0, "%s - %s\n", __func__, name);
 876
 877         /* instead of adding tests to protect against drv->do_write==NULL
 878          * at several places we refuse to create a sir_dev instance for
 879          * drivers which don't implement do_write.
 880          */
 881         if (!drv ||  !drv->do_write)
 882                 return NULL;
 883
 884         /*
 885          *  Allocate new instance of the device
 886          */
 887         ndev = alloc_irdadev(sizeof(*dev));
 888         if (ndev == NULL) {
 889                 IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __func__);
 890                 goto out;
 891         }
 892         dev = netdev_priv(ndev);
 893
 894         irda_init_max_qos_capabilies(&dev->qos);
 895         dev->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
 896         dev->qos.min_turn_time.bits = drv->qos_mtt_bits;
 897         irda_qos_bits_to_value(&dev->qos);
 898
 899         strncpy(dev->hwname, name, sizeof(dev->hwname)-1);
 900
 901         atomic_set(&dev->enable_rx, 0);
 902         dev->tx_skb = NULL;
 903
 904         spin_lock_init(&dev->tx_lock);
 905         init_MUTEX(&dev->fsm.sem);
 906
 907         dev->drv = drv;
 908         dev->netdev = ndev;
 909
 910         /* Override the network functions we need to use */
 911         ndev->hard_start_xmit = sirdev_hard_xmit;
 912         ndev->open = sirdev_open;
 913         ndev->stop = sirdev_close;
 914         ndev->do_ioctl = sirdev_ioctl;
 915
 916         if (register_netdev(ndev)) {
 917                 IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
 918                 goto out_freenetdev;
 919         }
 920
 921         return dev;
 922
 923 out_freenetdev:
 924         free_netdev(ndev);
 925 out:
 926         return NULL;
 927 }
 928 EXPORT_SYMBOL(sirdev_get_instance);
 929
 930 int sirdev_put_instance(struct sir_dev *dev)
 931 {
 932         int err = 0;
 933
 934         IRDA_DEBUG(0, "%s\n", __func__);
 935
 936         atomic_set(&dev->enable_rx, 0);
 937
 938         netif_carrier_off(dev->netdev);
 939         netif_device_detach(dev->netdev);
 940
 941         if (dev->dongle_drv)
 942                 err = sirdev_schedule_dongle_close(dev);
 943         if (err)
 944                 IRDA_ERROR("%s - error %d\n", __func__, err);
 945
 946         sirdev_close(dev->netdev);
 947
 948         down(&dev->fsm.sem);
 949         dev->fsm.state = SIRDEV_STATE_DEAD;     /* mark staled */
 950         dev->dongle_drv = NULL;
 951         dev->priv = NULL;
 952         up(&dev->fsm.sem);
 953
 954         /* Remove netdevice */
 955         unregister_netdev(dev->netdev);
 956
 957         free_netdev(dev->netdev);
 958
 959         return 0;
 960 }
 961 EXPORT_SYMBOL(sirdev_put_instance);
 962
 963 static int __init sir_wq_init(void)
 964 {
 965         irda_sir_wq = create_singlethread_workqueue("irda_sir_wq");
 966         if (!irda_sir_wq)
 967                 return -ENOMEM;
 968         return 0;
 969 }
 970
 971 static void __exit sir_wq_exit(void)
 972 {
 973         destroy_workqueue(irda_sir_wq);
 974 }
 975
 976 module_init(sir_wq_init);
 977 module_exit(sir_wq_exit);
 978
 979 MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
 980 MODULE_DESCRIPTION("IrDA SIR core");
 981 MODULE_LICENSE("GPL");