2 * Copyright (c) 2000-2006 PMC-Sierra INC.
4 * This program is free software; you can redistribute it
5 * and/or modify it under the terms of the GNU General
6 * Public License as published by the Free Software
7 * Foundation; either version 2 of the License, or (at your
8 * option) any later version.
10 * This program is distributed in the hope that it will be
11 * useful, but WITHOUT ANY WARRANTY; without even the implied
12 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
13 * PURPOSE. See the GNU General Public License for more
16 * You should have received a copy of the GNU General Public
17 * License along with this program; if not, write to the Free
18 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
21 * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
22 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
29 #define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
32 * It is convenient to program the OATRAN register so that
33 * Athena virtual address space and PCI address space are
34 * the same. This is not a requirement, just a convenience.
36 * The only hard restrictions on the value of OATRAN is that
37 * OATRAN must not be programmed to allow translated memory
38 * addresses to fall within the lowest 512MB of
39 * PCI address space. This region is hardcoded
40 * for use as Athena PCI Host Controller target
41 * access memory space to the Athena's SDRAM.
43 * Note that OATRAN applies only to memory accesses, not
46 * To program OATRAN to make Athena virtual address space
47 * and PCI address space have the same values, OATRAN
48 * is to be programmed to 0xB8000000. The top seven
49 * bits of the value mimic the seven bits clipped off
50 * by the PCI Host controller.
52 * With OATRAN at the said value, when the CPU does
53 * an access to its virtual address at, say 0xB900_5000,
54 * the address appearing on the PCI bus will be
58 #define MSP_PCI_OATRAN 0xB8000000UL
60 #define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL)
61 #define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000)
62 #define MSP_PCI_SPACE_END \
63 (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
64 #define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL)
65 #define MSP_PCI_IOSPACE_SIZE 0x1000
66 #define MSP_PCI_IOSPACE_END \
67 (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
69 /* IRQ for PCI status interrupts */
70 #define PCI_STAT_IRQ 20
72 #define QFLUSH_REG_1 0xB7F40000
74 typedef volatile unsigned int pcireg;
75 typedef void * volatile ppcireg;
79 pcireg unused1; /* +0x00 */
80 pcireg unused2; /* +0x04 */
81 ppcireg unused3; /* +0x08 */
82 ppcireg unused4; /* +0x0C */
83 pcireg unused5; /* +0x10 */
84 pcireg unused6; /* +0x14 */
85 pcireg unused7; /* +0x18 */
86 ppcireg unused8; /* +0x1C */
87 ppcireg unused9; /* +0x20 */
88 pcireg unusedA; /* +0x24 */
89 ppcireg unusedB; /* +0x28 */
90 ppcireg unusedC; /* +0x2C */
95 config_device_vendor, /* 0 */
96 config_status_command, /* 1 */
97 config_class_revision, /* 2 */
98 config_BIST_header_latency_cache, /* 3 */
102 config_not_used7, /* 7 */
103 config_not_used8, /* 8 */
104 config_not_used9, /* 9 */
106 config_subsystem, /* 11 */
107 config_not_used12, /* 12 */
108 config_capabilities, /* 13 */
109 config_not_used14, /* 14 */
110 config_lat_grant_irq, /* 15 */
111 config_message_control,/* 16 */
112 config_message_addr, /* 17 */
113 config_message_data, /* 18 */
114 config_VPD_addr, /* 19 */
115 config_VPD_data, /* 20 */
116 config_maxregs /* 21 - number of registers */
121 pcireg hop_unused_00; /* +0x00 */
122 pcireg hop_unused_04; /* +0x04 */
123 pcireg hop_unused_08; /* +0x08 */
124 pcireg hop_unused_0C; /* +0x0C */
125 pcireg hop_unused_10; /* +0x10 */
126 pcireg hop_unused_14; /* +0x14 */
127 pcireg hop_unused_18; /* +0x18 */
128 pcireg hop_unused_1C; /* +0x1C */
129 pcireg hop_unused_20; /* +0x20 */
130 pcireg hop_unused_24; /* +0x24 */
131 pcireg hop_unused_28; /* +0x28 */
132 pcireg hop_unused_2C; /* +0x2C */
133 pcireg hop_unused_30; /* +0x30 */
134 pcireg hop_unused_34; /* +0x34 */
135 pcireg if_control; /* +0x38 */
136 pcireg oatran; /* +0x3C */
137 pcireg reset_ctl; /* +0x40 */
138 pcireg config_addr; /* +0x44 */
139 pcireg hop_unused_48; /* +0x48 */
140 pcireg msg_signaled_int_status; /* +0x4C */
141 pcireg msg_signaled_int_mask; /* +0x50 */
142 pcireg if_status; /* +0x54 */
143 pcireg if_mask; /* +0x58 */
144 pcireg hop_unused_5C; /* +0x5C */
145 pcireg hop_unused_60; /* +0x60 */
146 pcireg hop_unused_64; /* +0x64 */
147 pcireg hop_unused_68; /* +0x68 */
148 pcireg hop_unused_6C; /* +0x6C */
149 pcireg hop_unused_70; /* +0x70 */
151 struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
153 pcireg error_hdr1; /* +0xE0 */
154 pcireg error_hdr2; /* +0xE4 */
156 pcireg config[config_maxregs] __attribute__((aligned(256)));
160 #define BPCI_CFGADDR_BUSNUM_SHF 16
161 #define BPCI_CFGADDR_FUNCTNUM_SHF 8
162 #define BPCI_CFGADDR_REGNUM_SHF 2
163 #define BPCI_CFGADDR_ENABLE (1<<31)
165 #define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
166 #define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
167 #define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */
168 #define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */
169 #define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
170 #define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */
171 #define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */
173 #define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */
174 #define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */
175 #define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */
176 #define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
177 #define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
178 #define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
179 #define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
180 #define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
181 #define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */
182 #define BPCI_IFSTATUS_SER (1<<19) /* System error */
183 #define BPCI_IFSTATUS_PER (1<<20) /* Parity error */
184 #define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */
185 #define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */
186 #define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */
187 #define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */
188 #define BPCI_IFSTATUS_TA (1<<28) /* Target abort */
189 #define BPCI_IFSTATUS_MA (1<<29) /* Master abort */
190 #define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */
191 #define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */
193 #define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */
194 #define BPCI_RESETCTL_RT (1<<4) /* Release time */
195 #define BPCI_RESETCTL_CT (1<<8) /* Config time */
196 #define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */
197 #define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */
198 #define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */
200 extern struct msp_pci_regs msp_pci_regs
201 __attribute__((section(".register")));
202 extern unsigned long msp_pci_config_space
203 __attribute__((section(".register")));
205 #endif /* !_MSP_PCI_H_ */