git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-hcd.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
   6  *
   7  * [ Initialisation is based on Linus'  ]
   8  * [ uhci code and gregs ohci fragments ]
   9  * [ (C) Copyright 1999 Linus Torvalds  ]
  10  * [ (C) Copyright 1999 Gregory P. Smith]
  11  *
  12  *
  13  * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
  14  * interfaces (though some non-x86 Intel chips use it).  It supports
  15  * smarter hardware than UHCI.  A download link for the spec available
  16  * through the http://www.usb.org website.
  17  *
  18  * History:
  19  *
  20  * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
  21  * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
  22  * 2003/02/24 show registers in sysfs (Kevin Brosius)
  23  *
  24  * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
  25  *      bandwidth accounting; if debugging, show schedules in driverfs
  26  * 2002/07/19 fixes to management of ED and schedule state.
  27  * 2002/06/09 SA-1111 support (Christopher Hoover)
  28  * 2002/06/01 remember frame when HC won't see EDs any more; use that info
  29  *      to fix urb unlink races caused by interrupt latency assumptions;
  30  *      minor ED field and function naming updates
  31  * 2002/01/18 package as a patch for 2.5.3; this should match the
  32  *      2.4.17 kernel modulo some bugs being fixed.
  33  *
  34  * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
  35  *      from post-2.4.5 patches.
  36  * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
  37  * 2001/09/07 match PCI PM changes, errnos from Linus' tree
  38  * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
  39  *      pbook pci quirks gone (please fix pbook pci sw!) (db)
  40  *
  41  * 2001/04/08 Identify version on module load (gb)
  42  * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
  43         pci_map_single (db)
  44  * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
  45  * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
  46  *
  47  * 2000/09/26 fixed races in removing the private portion of the urb
  48  * 2000/09/07 disable bulk and control lists when unlinking the last
  49  *      endpoint descriptor in order to avoid unrecoverable errors on
  50  *      the Lucent chips. (rwc@sgi)
  51  * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
  52  *      urb unlink probs, indentation fixes
  53  * 2000/08/11 various oops fixes mostly affecting iso and cleanup from
  54  *      device unplugs.
  55  * 2000/06/28 use PCI hotplug framework, for better power management
  56  *      and for Cardbus support (David Brownell)
  57  * 2000/earlier:  fixes for NEC/Lucent chips; suspend/resume handling
  58  *      when the controller loses power; handle UE; cleanup; ...
  59  *
  60  * v5.2 1999/12/07 URB 3rd preview,
  61  * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
  62  * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume
  63  *      i386: HUB, Keyboard, Mouse, Printer
  64  *
  65  * v4.3 1999/10/27 multiple HCs, bulk_request
  66  * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
  67  * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
  68  * v4.0 1999/08/18
  69  * v3.0 1999/06/25
  70  * v2.1 1999/05/09  code clean up
  71  * v2.0 1999/05/04
  72  * v1.0 1999/04/27 initial release
  73  *
  74  * This file is licenced under the GPL.
  75  */
  76
  77 #include <linux/config.h>
  78 #include <linux/module.h>
  79 #include <linux/moduleparam.h>
  80 #include <linux/pci.h>
  81 #include <linux/kernel.h>
  82 #include <linux/delay.h>
  83 #include <linux/ioport.h>
  84 #include <linux/sched.h>
  85 #include <linux/slab.h>
  86 #include <linux/smp_lock.h>
  87 #include <linux/errno.h>
  88 #include <linux/init.h>
  89 #include <linux/timer.h>
  90 #include <linux/list.h>
  91 #include <linux/usb.h>
  92 #include <linux/usb_otg.h>
  93 #include <linux/dma-mapping.h>
  94 #include <linux/dmapool.h>
  95 #include <linux/reboot.h>
  96
  97 #include <asm/io.h>
  98 #include <asm/irq.h>
  99 #include <asm/system.h>
 100 #include <asm/unaligned.h>
 101 #include <asm/byteorder.h>
 102
 103 #include "../core/hcd.h"
 104
 105 #define DRIVER_VERSION "2005 April 22"
 106 #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
 107 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
 108
 109 /*-------------------------------------------------------------------------*/
 110
 111 #undef OHCI_VERBOSE_DEBUG       /* not always helpful */
 112
 113 /* For initializing controller (mask in an HCFS mode too) */
 114 #define OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
 115 #define OHCI_INTR_INIT \
 116         (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_WDH)
 117
 118 #ifdef __hppa__
 119 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
 120 #define IR_DISABLE
 121 #endif
 122
 123 #ifdef CONFIG_ARCH_OMAP
 124 /* OMAP doesn't support IR (no SMM; not needed) */
 125 #define IR_DISABLE
 126 #endif
 127
 128 /*-------------------------------------------------------------------------*/
 129
 130 static const char       hcd_name [] = "ohci_hcd";
 131
 132 #include "ohci.h"
 133
 134 static void ohci_dump (struct ohci_hcd *ohci, int verbose);
 135 static int ohci_init (struct ohci_hcd *ohci);
 136 static void ohci_stop (struct usb_hcd *hcd);
 137 static int ohci_reboot (struct notifier_block *, unsigned long , void *);
 138
 139 #include "ohci-hub.c"
 140 #include "ohci-dbg.c"
 141 #include "ohci-mem.c"
 142 #include "ohci-q.c"
 143
 144
 145 /*
 146  * On architectures with edge-triggered interrupts we must never return
 147  * IRQ_NONE.
 148  */
 149 #if defined(CONFIG_SA1111)  /* ... or other edge-triggered systems */
 150 #define IRQ_NOTMINE     IRQ_HANDLED
 151 #else
 152 #define IRQ_NOTMINE     IRQ_NONE
 153 #endif
 154
 155
 156 /* Some boards misreport power switching/overcurrent */
 157 static int distrust_firmware = 1;
 158 module_param (distrust_firmware, bool, 0);
 159 MODULE_PARM_DESC (distrust_firmware,
 160         "true to distrust firmware power/overcurrent setup");
 161
 162 /* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
 163 static int no_handshake = 0;
 164 module_param (no_handshake, bool, 0);
 165 MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
 166
 167 /*-------------------------------------------------------------------------*/
 168
 169 /*
 170  * queue up an urb for anything except the root hub
 171  */
 172 static int ohci_urb_enqueue (
 173         struct usb_hcd  *hcd,
 174         struct usb_host_endpoint *ep,
 175         struct urb      *urb,
 176         gfp_t           mem_flags
 177 ) {
 178         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 179         struct ed       *ed;
 180         urb_priv_t      *urb_priv;
 181         unsigned int    pipe = urb->pipe;
 182         int             i, size = 0;
 183         unsigned long   flags;
 184         int             retval = 0;
 185
 186 #ifdef OHCI_VERBOSE_DEBUG
 187         urb_print (urb, "SUB", usb_pipein (pipe));
 188 #endif
 189
 190         /* every endpoint has a ed, locate and maybe (re)initialize it */
 191         if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
 192                 return -ENOMEM;
 193
 194         /* for the private part of the URB we need the number of TDs (size) */
 195         switch (ed->type) {
 196                 case PIPE_CONTROL:
 197                         /* td_submit_urb() doesn't yet handle these */
 198                         if (urb->transfer_buffer_length > 4096)
 199                                 return -EMSGSIZE;
 200
 201                         /* 1 TD for setup, 1 for ACK, plus ... */
 202                         size = 2;
 203                         /* FALLTHROUGH */
 204                 // case PIPE_INTERRUPT:
 205                 // case PIPE_BULK:
 206                 default:
 207                         /* one TD for every 4096 Bytes (can be upto 8K) */
 208                         size += urb->transfer_buffer_length / 4096;
 209                         /* ... and for any remaining bytes ... */
 210                         if ((urb->transfer_buffer_length % 4096) != 0)
 211                                 size++;
 212                         /* ... and maybe a zero length packet to wrap it up */
 213                         if (size == 0)
 214                                 size++;
 215                         else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
 216                                 && (urb->transfer_buffer_length
 217                                         % usb_maxpacket (urb->dev, pipe,
 218                                                 usb_pipeout (pipe))) == 0)
 219                                 size++;
 220                         break;
 221                 case PIPE_ISOCHRONOUS: /* number of packets from URB */
 222                         size = urb->number_of_packets;
 223                         break;
 224         }
 225
 226         /* allocate the private part of the URB */
 227         urb_priv = kmalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
 228                         mem_flags);
 229         if (!urb_priv)
 230                 return -ENOMEM;
 231         memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
 232         INIT_LIST_HEAD (&urb_priv->pending);
 233         urb_priv->length = size;
 234         urb_priv->ed = ed;
 235
 236         /* allocate the TDs (deferring hash chain updates) */
 237         for (i = 0; i < size; i++) {
 238                 urb_priv->td [i] = td_alloc (ohci, mem_flags);
 239                 if (!urb_priv->td [i]) {
 240                         urb_priv->length = i;
 241                         urb_free_priv (ohci, urb_priv);
 242                         return -ENOMEM;
 243                 }
 244         }
 245
 246         spin_lock_irqsave (&ohci->lock, flags);
 247
 248         /* don't submit to a dead HC */
 249         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
 250                 retval = -ENODEV;
 251                 goto fail;
 252         }
 253         if (!HC_IS_RUNNING(hcd->state)) {
 254                 retval = -ENODEV;
 255                 goto fail;
 256         }
 257
 258         /* in case of unlink-during-submit */
 259         spin_lock (&urb->lock);
 260         if (urb->status != -EINPROGRESS) {
 261                 spin_unlock (&urb->lock);
 262                 urb->hcpriv = urb_priv;
 263                 finish_urb (ohci, urb, NULL);
 264                 retval = 0;
 265                 goto fail;
 266         }
 267
 268         /* schedule the ed if needed */
 269         if (ed->state == ED_IDLE) {
 270                 retval = ed_schedule (ohci, ed);
 271                 if (retval < 0)
 272                         goto fail0;
 273                 if (ed->type == PIPE_ISOCHRONOUS) {
 274                         u16     frame = ohci_frame_no(ohci);
 275
 276                         /* delay a few frames before the first TD */
 277                         frame += max_t (u16, 8, ed->interval);
 278                         frame &= ~(ed->interval - 1);
 279                         frame |= ed->branch;
 280                         urb->start_frame = frame;
 281
 282                         /* yes, only URB_ISO_ASAP is supported, and
 283                          * urb->start_frame is never used as input.
 284                          */
 285                 }
 286         } else if (ed->type == PIPE_ISOCHRONOUS)
 287                 urb->start_frame = ed->last_iso + ed->interval;
 288
 289         /* fill the TDs and link them to the ed; and
 290          * enable that part of the schedule, if needed
 291          * and update count of queued periodic urbs
 292          */
 293         urb->hcpriv = urb_priv;
 294         td_submit_urb (ohci, urb);
 295
 296 fail0:
 297         spin_unlock (&urb->lock);
 298 fail:
 299         if (retval)
 300                 urb_free_priv (ohci, urb_priv);
 301         spin_unlock_irqrestore (&ohci->lock, flags);
 302         return retval;
 303 }
 304
 305 /*
 306  * decouple the URB from the HC queues (TDs, urb_priv); it's
 307  * already marked using urb->status.  reporting is always done
 308  * asynchronously, and we might be dealing with an urb that's
 309  * partially transferred, or an ED with other urbs being unlinked.
 310  */
 311 static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
 312 {
 313         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 314         unsigned long           flags;
 315
 316 #ifdef OHCI_VERBOSE_DEBUG
 317         urb_print (urb, "UNLINK", 1);
 318 #endif
 319
 320         spin_lock_irqsave (&ohci->lock, flags);
 321         if (HC_IS_RUNNING(hcd->state)) {
 322                 urb_priv_t  *urb_priv;
 323
 324                 /* Unless an IRQ completed the unlink while it was being
 325                  * handed to us, flag it for unlink and giveback, and force
 326                  * some upcoming INTR_SF to call finish_unlinks()
 327                  */
 328                 urb_priv = urb->hcpriv;
 329                 if (urb_priv) {
 330                         if (urb_priv->ed->state == ED_OPER)
 331                                 start_ed_unlink (ohci, urb_priv->ed);
 332                 }
 333         } else {
 334                 /*
 335                  * with HC dead, we won't respect hc queue pointers
 336                  * any more ... just clean up every urb's memory.
 337                  */
 338                 if (urb->hcpriv)
 339                         finish_urb (ohci, urb, NULL);
 340         }
 341         spin_unlock_irqrestore (&ohci->lock, flags);
 342         return 0;
 343 }
 344
 345 /*-------------------------------------------------------------------------*/
 346
 347 /* frees config/altsetting state for endpoints,
 348  * including ED memory, dummy TD, and bulk/intr data toggle
 349  */
 350
 351 static void
 352 ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 353 {
 354         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 355         unsigned long           flags;
 356         struct ed               *ed = ep->hcpriv;
 357         unsigned                limit = 1000;
 358
 359         /* ASSERT:  any requests/urbs are being unlinked */
 360         /* ASSERT:  nobody can be submitting urbs for this any more */
 361
 362         if (!ed)
 363                 return;
 364
 365 rescan:
 366         spin_lock_irqsave (&ohci->lock, flags);
 367
 368         if (!HC_IS_RUNNING (hcd->state)) {
 369 sanitize:
 370                 ed->state = ED_IDLE;
 371                 finish_unlinks (ohci, 0, NULL);
 372         }
 373
 374         switch (ed->state) {
 375         case ED_UNLINK:         /* wait for hw to finish? */
 376                 /* major IRQ delivery trouble loses INTR_SF too... */
 377                 if (limit-- == 0) {
 378                         ohci_warn (ohci, "IRQ INTR_SF lossage\n");
 379                         goto sanitize;
 380                 }
 381                 spin_unlock_irqrestore (&ohci->lock, flags);
 382                 schedule_timeout_uninterruptible(1);
 383                 goto rescan;
 384         case ED_IDLE:           /* fully unlinked */
 385                 if (list_empty (&ed->td_list)) {
 386                         td_free (ohci, ed->dummy);
 387                         ed_free (ohci, ed);
 388                         break;
 389                 }
 390                 /* else FALL THROUGH */
 391         default:
 392                 /* caller was supposed to have unlinked any requests;
 393                  * that's not our job.  can't recover; must leak ed.
 394                  */
 395                 ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n",
 396                         ed, ep->desc.bEndpointAddress, ed->state,
 397                         list_empty (&ed->td_list) ? "" : " (has tds)");
 398                 td_free (ohci, ed->dummy);
 399                 break;
 400         }
 401         ep->hcpriv = NULL;
 402         spin_unlock_irqrestore (&ohci->lock, flags);
 403         return;
 404 }
 405
 406 static int ohci_get_frame (struct usb_hcd *hcd)
 407 {
 408         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 409
 410         return ohci_frame_no(ohci);
 411 }
 412
 413 static void ohci_usb_reset (struct ohci_hcd *ohci)
 414 {
 415         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 416         ohci->hc_control &= OHCI_CTRL_RWC;
 417         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 418 }
 419
 420 /* reboot notifier forcibly disables IRQs and DMA, helping kexec and
 421  * other cases where the next software may expect clean state from the
 422  * "firmware".  this is bus-neutral, unlike shutdown() methods.
 423  */
 424 static int
 425 ohci_reboot (struct notifier_block *block, unsigned long code, void *null)
 426 {
 427         struct ohci_hcd *ohci;
 428
 429         ohci = container_of (block, struct ohci_hcd, reboot_notifier);
 430         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 431         ohci_usb_reset (ohci);
 432         /* flush the writes */
 433         (void) ohci_readl (ohci, &ohci->regs->control);
 434         return 0;
 435 }
 436
 437 /*-------------------------------------------------------------------------*
 438  * HC functions
 439  *-------------------------------------------------------------------------*/
 440
 441 /* init memory, and kick BIOS/SMM off */
 442
 443 static int ohci_init (struct ohci_hcd *ohci)
 444 {
 445         int ret;
 446         struct usb_hcd *hcd = ohci_to_hcd(ohci);
 447
 448         disable (ohci);
 449         ohci->regs = hcd->regs;
 450         ohci->next_statechange = jiffies;
 451
 452         /* REVISIT this BIOS handshake is now moved into PCI "quirks", and
 453          * was never needed for most non-PCI systems ... remove the code?
 454          */
 455
 456 #ifndef IR_DISABLE
 457         /* SMM owns the HC?  not for long! */
 458         if (!no_handshake && ohci_readl (ohci,
 459                                         &ohci->regs->control) & OHCI_CTRL_IR) {
 460                 u32 temp;
 461
 462                 ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");
 463
 464                 /* this timeout is arbitrary.  we make it long, so systems
 465                  * depending on usb keyboards may be usable even if the
 466                  * BIOS/SMM code seems pretty broken.
 467                  */
 468                 temp = 500;     /* arbitrary: five seconds */
 469
 470                 ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
 471                 ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus);
 472                 while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) {
 473                         msleep (10);
 474                         if (--temp == 0) {
 475                                 ohci_err (ohci, "USB HC takeover failed!"
 476                                         "  (BIOS/SMM bug)\n");
 477                                 return -EBUSY;
 478                         }
 479                 }
 480                 ohci_usb_reset (ohci);
 481         }
 482 #endif
 483
 484         /* Disable HC interrupts */
 485         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 486
 487         /* flush the writes, and save key bits like RWC */
 488         if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
 489                 ohci->hc_control |= OHCI_CTRL_RWC;
 490
 491         /* Read the number of ports unless overridden */
 492         if (ohci->num_ports == 0)
 493                 ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
 494
 495         if (ohci->hcca)
 496                 return 0;
 497
 498         ohci->hcca = dma_alloc_coherent (hcd->self.controller,
 499                         sizeof *ohci->hcca, &ohci->hcca_dma, 0);
 500         if (!ohci->hcca)
 501                 return -ENOMEM;
 502
 503         if ((ret = ohci_mem_init (ohci)) < 0)
 504                 ohci_stop (hcd);
 505         else {
 506                 register_reboot_notifier (&ohci->reboot_notifier);
 507                 create_debug_files (ohci);
 508         }
 509
 510         return ret;
 511 }
 512
 513 /*-------------------------------------------------------------------------*/
 514
 515 /* Start an OHCI controller, set the BUS operational
 516  * resets USB and controller
 517  * enable interrupts
 518  */
 519 static int ohci_run (struct ohci_hcd *ohci)
 520 {
 521         u32                     mask, temp;
 522         int                     first = ohci->fminterval == 0;
 523         struct usb_hcd          *hcd = ohci_to_hcd(ohci);
 524
 525         disable (ohci);
 526
 527         /* boot firmware should have set this up (5.1.1.3.1) */
 528         if (first) {
 529
 530                 temp = ohci_readl (ohci, &ohci->regs->fminterval);
 531                 ohci->fminterval = temp & 0x3fff;
 532                 if (ohci->fminterval != FI)
 533                         ohci_dbg (ohci, "fminterval delta %d\n",
 534                                 ohci->fminterval - FI);
 535                 ohci->fminterval |= FSMP (ohci->fminterval) << 16;
 536                 /* also: power/overcurrent flags in roothub.a */
 537         }
 538
 539         /* Reset USB nearly "by the book".  RemoteWakeupConnected was
 540          * saved if boot firmware (BIOS/SMM/...) told us it's connected,
 541          * or if bus glue did the same (e.g. for PCI add-in cards with
 542          * PCI PM support).
 543          */
 544         ohci_dbg (ohci, "resetting from state '%s', control = 0x%x\n",
 545                         hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
 546                         ohci_readl (ohci, &ohci->regs->control));
 547         if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
 548                         && !device_may_wakeup(hcd->self.controller))
 549                 device_init_wakeup(hcd->self.controller, 1);
 550
 551         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 552         case OHCI_USB_OPER:
 553                 temp = 0;
 554                 break;
 555         case OHCI_USB_SUSPEND:
 556         case OHCI_USB_RESUME:
 557                 ohci->hc_control &= OHCI_CTRL_RWC;
 558                 ohci->hc_control |= OHCI_USB_RESUME;
 559                 temp = 10 /* msec wait */;
 560                 break;
 561         // case OHCI_USB_RESET:
 562         default:
 563                 ohci->hc_control &= OHCI_CTRL_RWC;
 564                 ohci->hc_control |= OHCI_USB_RESET;
 565                 temp = 50 /* msec wait */;
 566                 break;
 567         }
 568         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 569         // flush the writes
 570         (void) ohci_readl (ohci, &ohci->regs->control);
 571         msleep(temp);
 572         temp = roothub_a (ohci);
 573         if (!(temp & RH_A_NPS)) {
 574                 /* power down each port */
 575                 for (temp = 0; temp < ohci->num_ports; temp++)
 576                         ohci_writel (ohci, RH_PS_LSDA,
 577                                 &ohci->regs->roothub.portstatus [temp]);
 578         }
 579         // flush those writes
 580         (void) ohci_readl (ohci, &ohci->regs->control);
 581         memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
 582
 583         /* 2msec timelimit here means no irqs/preempt */
 584         spin_lock_irq (&ohci->lock);
 585
 586 retry:
 587         /* HC Reset requires max 10 us delay */
 588         ohci_writel (ohci, OHCI_HCR,  &ohci->regs->cmdstatus);
 589         temp = 30;      /* ... allow extra time */
 590         while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
 591                 if (--temp == 0) {
 592                         spin_unlock_irq (&ohci->lock);
 593                         ohci_err (ohci, "USB HC reset timed out!\n");
 594                         return -1;
 595                 }
 596                 udelay (1);
 597         }
 598
 599         /* now we're in the SUSPEND state ... must go OPERATIONAL
 600          * within 2msec else HC enters RESUME
 601          *
 602          * ... but some hardware won't init fmInterval "by the book"
 603          * (SiS, OPTi ...), so reset again instead.  SiS doesn't need
 604          * this if we write fmInterval after we're OPERATIONAL.
 605          * Unclear about ALi, ServerWorks, and others ... this could
 606          * easily be a longstanding bug in chip init on Linux.
 607          */
 608         if (ohci->flags & OHCI_QUIRK_INITRESET) {
 609                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 610                 // flush those writes
 611                 (void) ohci_readl (ohci, &ohci->regs->control);
 612         }
 613
 614         /* Tell the controller where the control and bulk lists are
 615          * The lists are empty now. */
 616         ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
 617         ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
 618
 619         /* a reset clears this */
 620         ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
 621
 622         periodic_reinit (ohci);
 623
 624         /* some OHCI implementations are finicky about how they init.
 625          * bogus values here mean not even enumeration could work.
 626          */
 627         if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0
 628                         || !ohci_readl (ohci, &ohci->regs->periodicstart)) {
 629                 if (!(ohci->flags & OHCI_QUIRK_INITRESET)) {
 630                         ohci->flags |= OHCI_QUIRK_INITRESET;
 631                         ohci_dbg (ohci, "enabling initreset quirk\n");
 632                         goto retry;
 633                 }
 634                 spin_unlock_irq (&ohci->lock);
 635                 ohci_err (ohci, "init err (%08x %04x)\n",
 636                         ohci_readl (ohci, &ohci->regs->fminterval),
 637                         ohci_readl (ohci, &ohci->regs->periodicstart));
 638                 return -EOVERFLOW;
 639         }
 640
 641         /* start controller operations */
 642         ohci->hc_control &= OHCI_CTRL_RWC;
 643         ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
 644         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 645         hcd->state = HC_STATE_RUNNING;
 646
 647         /* wake on ConnectStatusChange, matching external hubs */
 648         ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
 649
 650         /* Choose the interrupts we care about now, others later on demand */
 651         mask = OHCI_INTR_INIT;
 652         ohci_writel (ohci, mask, &ohci->regs->intrstatus);
 653         ohci_writel (ohci, mask, &ohci->regs->intrenable);
 654
 655         /* handle root hub init quirks ... */
 656         temp = roothub_a (ohci);
 657         temp &= ~(RH_A_PSM | RH_A_OCPM);
 658         if (ohci->flags & OHCI_QUIRK_SUPERIO) {
 659                 /* NSC 87560 and maybe others */
 660                 temp |= RH_A_NOCP;
 661                 temp &= ~(RH_A_POTPGT | RH_A_NPS);
 662                 ohci_writel (ohci, temp, &ohci->regs->roothub.a);
 663         } else if ((ohci->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
 664                 /* hub power always on; required for AMD-756 and some
 665                  * Mac platforms.  ganged overcurrent reporting, if any.
 666                  */
 667                 temp |= RH_A_NPS;
 668                 ohci_writel (ohci, temp, &ohci->regs->roothub.a);
 669         }
 670         ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
 671         ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM,
 672                                                 &ohci->regs->roothub.b);
 673         // flush those writes
 674         (void) ohci_readl (ohci, &ohci->regs->control);
 675
 676         spin_unlock_irq (&ohci->lock);
 677
 678         // POTPGT delay is bits 24-31, in 2 ms units.
 679         mdelay ((temp >> 23) & 0x1fe);
 680         hcd->state = HC_STATE_RUNNING;
 681
 682         ohci_dump (ohci, 1);
 683
 684         return 0;
 685 }
 686
 687 /*-------------------------------------------------------------------------*/
 688
 689 /* an interrupt happens */
 690
 691 static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
 692 {
 693         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 694         struct ohci_regs __iomem *regs = ohci->regs;
 695         int                     ints;
 696
 697         /* we can eliminate a (slow) ohci_readl()
 698            if _only_ WDH caused this irq */
 699         if ((ohci->hcca->done_head != 0)
 700                         && ! (hc32_to_cpup (ohci, &ohci->hcca->done_head)
 701                                 & 0x01)) {
 702                 ints =  OHCI_INTR_WDH;
 703
 704         /* cardbus/... hardware gone before remove() */
 705         } else if ((ints = ohci_readl (ohci, &regs->intrstatus)) == ~(u32)0) {
 706                 disable (ohci);
 707                 ohci_dbg (ohci, "device removed!\n");
 708                 return IRQ_HANDLED;
 709
 710         /* interrupt for some other device? */
 711         } else if ((ints &= ohci_readl (ohci, &regs->intrenable)) == 0) {
 712                 return IRQ_NOTMINE;
 713         }
 714
 715         if (ints & OHCI_INTR_UE) {
 716                 disable (ohci);
 717                 ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
 718                 // e.g. due to PCI Master/Target Abort
 719
 720                 ohci_dump (ohci, 1);
 721                 ohci_usb_reset (ohci);
 722         }
 723
 724         if (ints & OHCI_INTR_RD) {
 725                 ohci_vdbg (ohci, "resume detect\n");
 726                 ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus);
 727                 if (hcd->state != HC_STATE_QUIESCING)
 728                         usb_hcd_resume_root_hub(hcd);
 729         }
 730
 731         if (ints & OHCI_INTR_WDH) {
 732                 if (HC_IS_RUNNING(hcd->state))
 733                         ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrdisable);
 734                 spin_lock (&ohci->lock);
 735                 dl_done_list (ohci, ptregs);
 736                 spin_unlock (&ohci->lock);
 737                 if (HC_IS_RUNNING(hcd->state))
 738                         ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable);
 739         }
 740
 741         /* could track INTR_SO to reduce available PCI/... bandwidth */
 742
 743         /* handle any pending URB/ED unlinks, leaving INTR_SF enabled
 744          * when there's still unlinking to be done (next frame).
 745          */
 746         spin_lock (&ohci->lock);
 747         if (ohci->ed_rm_list)
 748                 finish_unlinks (ohci, ohci_frame_no(ohci), ptregs);
 749         if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
 750                         && HC_IS_RUNNING(hcd->state))
 751                 ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
 752         spin_unlock (&ohci->lock);
 753
 754         if (HC_IS_RUNNING(hcd->state)) {
 755                 ohci_writel (ohci, ints, &regs->intrstatus);
 756                 ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
 757                 // flush those writes
 758                 (void) ohci_readl (ohci, &ohci->regs->control);
 759         }
 760
 761         return IRQ_HANDLED;
 762 }
 763
 764 /*-------------------------------------------------------------------------*/
 765
 766 static void ohci_stop (struct usb_hcd *hcd)
 767 {
 768         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 769
 770         ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
 771                 hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
 772                 hcd->state);
 773         ohci_dump (ohci, 1);
 774
 775         flush_scheduled_work();
 776
 777         ohci_usb_reset (ohci);
 778         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 779
 780         remove_debug_files (ohci);
 781         unregister_reboot_notifier (&ohci->reboot_notifier);
 782         ohci_mem_cleanup (ohci);
 783         if (ohci->hcca) {
 784                 dma_free_coherent (hcd->self.controller,
 785                                 sizeof *ohci->hcca,
 786                                 ohci->hcca, ohci->hcca_dma);
 787                 ohci->hcca = NULL;
 788                 ohci->hcca_dma = 0;
 789         }
 790 }
 791
 792 /*-------------------------------------------------------------------------*/
 793
 794 /* must not be called from interrupt context */
 795
 796 #ifdef  CONFIG_PM
 797
 798 static int ohci_restart (struct ohci_hcd *ohci)
 799 {
 800         int temp;
 801         int i;
 802         struct urb_priv *priv;
 803
 804         /* mark any devices gone, so they do nothing till khubd disconnects.
 805          * recycle any "live" eds/tds (and urbs) right away.
 806          * later, khubd disconnect processing will recycle the other state,
 807          * (either as disconnect/reconnect, or maybe someday as a reset).
 808          */
 809         spin_lock_irq(&ohci->lock);
 810         disable (ohci);
 811         usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
 812         if (!list_empty (&ohci->pending))
 813                 ohci_dbg(ohci, "abort schedule...\n");
 814         list_for_each_entry (priv, &ohci->pending, pending) {
 815                 struct urb      *urb = priv->td[0]->urb;
 816                 struct ed       *ed = priv->ed;
 817
 818                 switch (ed->state) {
 819                 case ED_OPER:
 820                         ed->state = ED_UNLINK;
 821                         ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE);
 822                         ed_deschedule (ohci, ed);
 823
 824                         ed->ed_next = ohci->ed_rm_list;
 825                         ed->ed_prev = NULL;
 826                         ohci->ed_rm_list = ed;
 827                         /* FALLTHROUGH */
 828                 case ED_UNLINK:
 829                         break;
 830                 default:
 831                         ohci_dbg(ohci, "bogus ed %p state %d\n",
 832                                         ed, ed->state);
 833                 }
 834
 835                 spin_lock (&urb->lock);
 836                 urb->status = -ESHUTDOWN;
 837                 spin_unlock (&urb->lock);
 838         }
 839         finish_unlinks (ohci, 0, NULL);
 840         spin_unlock_irq(&ohci->lock);
 841
 842         /* paranoia, in case that didn't work: */
 843
 844         /* empty the interrupt branches */
 845         for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
 846         for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
 847
 848         /* no EDs to remove */
 849         ohci->ed_rm_list = NULL;
 850
 851         /* empty control and bulk lists */
 852         ohci->ed_controltail = NULL;
 853         ohci->ed_bulktail    = NULL;
 854
 855         if ((temp = ohci_run (ohci)) < 0) {
 856                 ohci_err (ohci, "can't restart, %d\n", temp);
 857                 return temp;
 858         } else {
 859                 /* here we "know" root ports should always stay powered,
 860                  * and that if we try to turn them back on the root hub
 861                  * will respond to CSC processing.
 862                  */
 863                 i = ohci->num_ports;
 864                 while (i--)
 865                         ohci_writel (ohci, RH_PS_PSS,
 866                                 &ohci->regs->roothub.portstatus [temp]);
 867                 ohci_dbg (ohci, "restart complete\n");
 868         }
 869         return 0;
 870 }
 871 #endif
 872
 873 /*-------------------------------------------------------------------------*/
 874
 875 #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
 876
 877 MODULE_AUTHOR (DRIVER_AUTHOR);
 878 MODULE_DESCRIPTION (DRIVER_INFO);
 879 MODULE_LICENSE ("GPL");
 880
 881 #ifdef CONFIG_PCI
 882 #include "ohci-pci.c"
 883 #endif
 884
 885 #ifdef CONFIG_SA1111
 886 #include "ohci-sa1111.c"
 887 #endif
 888
 889 #ifdef CONFIG_ARCH_S3C2410
 890 #include "ohci-s3c2410.c"
 891 #endif
 892
 893 #ifdef CONFIG_ARCH_OMAP
 894 #include "ohci-omap.c"
 895 #endif
 896
 897 #ifdef CONFIG_ARCH_LH7A404
 898 #include "ohci-lh7a404.c"
 899 #endif
 900
 901 #ifdef CONFIG_PXA27x
 902 #include "ohci-pxa27x.c"
 903 #endif
 904
 905 #ifdef CONFIG_SOC_AU1X00
 906 #include "ohci-au1xxx.c"
 907 #endif
 908
 909 #ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
 910 #include "ohci-ppc-soc.c"
 911 #endif
 912
 913 #ifdef CONFIG_ARCH_AT91RM9200
 914 #include "ohci-at91.c"
 915 #endif
 916
 917 #if !(defined(CONFIG_PCI) \
 918       || defined(CONFIG_SA1111) \
 919       || defined(CONFIG_ARCH_S3C2410) \
 920       || defined(CONFIG_ARCH_OMAP) \
 921       || defined (CONFIG_ARCH_LH7A404) \
 922       || defined (CONFIG_PXA27x) \
 923       || defined (CONFIG_SOC_AU1X00) \
 924       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
 925       || defined (CONFIG_ARCH_AT91RM9200) \
 926         )
 927 #error "missing bus glue for ohci-hcd"
 928 #endif