git.oblomov.eu Git - linux-2.6/blob - drivers/scsi/qla4xxx/ql4_mbx.c

   1 /*
   2  * QLogic iSCSI HBA Driver
   3  * Copyright (c)  2003-2006 QLogic Corporation
   4  *
   5  * See LICENSE.qla4xxx for copyright and licensing details.
   6  */
   7
   8 #include "ql4_def.h"
   9 #include "ql4_glbl.h"
  10 #include "ql4_dbg.h"
  11 #include "ql4_inline.h"
  12
  13
  14 /**
  15  * qla4xxx_mailbox_command - issues mailbox commands
  16  * @ha: Pointer to host adapter structure.
  17  * @inCount: number of mailbox registers to load.
  18  * @outCount: number of mailbox registers to return.
  19  * @mbx_cmd: data pointer for mailbox in registers.
  20  * @mbx_sts: data pointer for mailbox out registers.
  21  *
  22  * This routine sssue mailbox commands and waits for completion.
  23  * If outCount is 0, this routine completes successfully WITHOUT waiting
  24  * for the mailbox command to complete.
  25  **/
  26 static int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
  27                                    uint8_t outCount, uint32_t *mbx_cmd,
  28                                    uint32_t *mbx_sts)
  29 {
  30         int status = QLA_ERROR;
  31         uint8_t i;
  32         u_long wait_count;
  33         uint32_t intr_status;
  34         unsigned long flags = 0;
  35
  36         /* Make sure that pointers are valid */
  37         if (!mbx_cmd || !mbx_sts) {
  38                 DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts "
  39                               "pointer\n", ha->host_no, __func__));
  40                 return status;
  41         }
  42         /* Mailbox code active */
  43         wait_count = MBOX_TOV * 100;
  44
  45         while (wait_count--) {
  46                 mutex_lock(&ha->mbox_sem);
  47                 if (!test_bit(AF_MBOX_COMMAND, &ha->flags)) {
  48                         set_bit(AF_MBOX_COMMAND, &ha->flags);
  49                         mutex_unlock(&ha->mbox_sem);
  50                         break;
  51                 }
  52                 mutex_unlock(&ha->mbox_sem);
  53                 if (!wait_count) {
  54                         DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n",
  55                                 ha->host_no, __func__));
  56                         return status;
  57                 }
  58                 msleep(10);
  59         }
  60
  61         /* To prevent overwriting mailbox registers for a command that has
  62          * not yet been serviced, check to see if a previously issued
  63          * mailbox command is interrupting.
  64          * -----------------------------------------------------------------
  65          */
  66         spin_lock_irqsave(&ha->hardware_lock, flags);
  67         intr_status = readl(&ha->reg->ctrl_status);
  68         if (intr_status & CSR_SCSI_PROCESSOR_INTR) {
  69                 /* Service existing interrupt */
  70                 qla4xxx_interrupt_service_routine(ha, intr_status);
  71                 clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
  72         }
  73
  74         /* Send the mailbox command to the firmware */
  75         ha->mbox_status_count = outCount;
  76         for (i = 0; i < outCount; i++)
  77                 ha->mbox_status[i] = 0;
  78
  79         /* Load all mailbox registers, except mailbox 0. */
  80         for (i = 1; i < inCount; i++)
  81                 writel(mbx_cmd[i], &ha->reg->mailbox[i]);
  82
  83         /* Wakeup firmware  */
  84         writel(mbx_cmd[0], &ha->reg->mailbox[0]);
  85         readl(&ha->reg->mailbox[0]);
  86         writel(set_rmask(CSR_INTR_RISC), &ha->reg->ctrl_status);
  87         readl(&ha->reg->ctrl_status);
  88         spin_unlock_irqrestore(&ha->hardware_lock, flags);
  89
  90         /* Wait for completion */
  91
  92         /*
  93          * If we don't want status, don't wait for the mailbox command to
  94          * complete.  For example, MBOX_CMD_RESET_FW doesn't return status,
  95          * you must poll the inbound Interrupt Mask for completion.
  96          */
  97         if (outCount == 0) {
  98                 status = QLA_SUCCESS;
  99                 goto mbox_exit;
 100         }
 101         /* Wait for command to complete */
 102         wait_count = jiffies + MBOX_TOV * HZ;
 103         while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) {
 104                 if (time_after_eq(jiffies, wait_count))
 105                         break;
 106
 107                 spin_lock_irqsave(&ha->hardware_lock, flags);
 108                 intr_status = readl(&ha->reg->ctrl_status);
 109                 if (intr_status & INTR_PENDING) {
 110                         /*
 111                          * Service the interrupt.
 112                          * The ISR will save the mailbox status registers
 113                          * to a temporary storage location in the adapter
 114                          * structure.
 115                          */
 116                         ha->mbox_status_count = outCount;
 117                         qla4xxx_interrupt_service_routine(ha, intr_status);
 118                 }
 119                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 120                 msleep(10);
 121         }
 122
 123         /* Check for mailbox timeout. */
 124         if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
 125                 DEBUG2(printk("scsi%ld: Mailbox Cmd 0x%08X timed out ...,"
 126                               " Scheduling Adapter Reset\n", ha->host_no,
 127                               mbx_cmd[0]));
 128                 ha->mailbox_timeout_count++;
 129                 mbx_sts[0] = (-1);
 130                 set_bit(DPC_RESET_HA, &ha->dpc_flags);
 131                 goto mbox_exit;
 132         }
 133
 134         /*
 135          * Copy the mailbox out registers to the caller's mailbox in/out
 136          * structure.
 137          */
 138         spin_lock_irqsave(&ha->hardware_lock, flags);
 139         for (i = 0; i < outCount; i++)
 140                 mbx_sts[i] = ha->mbox_status[i];
 141
 142         /* Set return status and error flags (if applicable). */
 143         switch (ha->mbox_status[0]) {
 144         case MBOX_STS_COMMAND_COMPLETE:
 145                 status = QLA_SUCCESS;
 146                 break;
 147
 148         case MBOX_STS_INTERMEDIATE_COMPLETION:
 149                 status = QLA_SUCCESS;
 150                 break;
 151
 152         case MBOX_STS_BUSY:
 153                 DEBUG2( printk("scsi%ld: %s: Cmd = %08X, ISP BUSY\n",
 154                                ha->host_no, __func__, mbx_cmd[0]));
 155                 ha->mailbox_timeout_count++;
 156                 break;
 157
 158         default:
 159                 DEBUG2(printk("scsi%ld: %s: **** FAILED, cmd = %08X, "
 160                               "sts = %08X ****\n", ha->host_no, __func__,
 161                               mbx_cmd[0], mbx_sts[0]));
 162                 break;
 163         }
 164         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 165
 166 mbox_exit:
 167         mutex_lock(&ha->mbox_sem);
 168         clear_bit(AF_MBOX_COMMAND, &ha->flags);
 169         mutex_unlock(&ha->mbox_sem);
 170         clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
 171
 172         return status;
 173 }
 174
 175 /**
 176  * qla4xxx_initialize_fw_cb - initializes firmware control block.
 177  * @ha: Pointer to host adapter structure.
 178  **/
 179 int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 180 {
 181         struct init_fw_ctrl_blk *init_fw_cb;
 182         dma_addr_t init_fw_cb_dma;
 183         uint32_t mbox_cmd[MBOX_REG_COUNT];
 184         uint32_t mbox_sts[MBOX_REG_COUNT];
 185         int status = QLA_ERROR;
 186
 187         init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
 188                                         sizeof(struct init_fw_ctrl_blk),
 189                                         &init_fw_cb_dma, GFP_KERNEL);
 190         if (init_fw_cb == NULL) {
 191                 DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
 192                               ha->host_no, __func__));
 193                 return 10;
 194         }
 195         memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk));
 196
 197         /* Get Initialize Firmware Control Block. */
 198         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 199         memset(&mbox_sts, 0, sizeof(mbox_sts));
 200
 201         mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
 202         mbox_cmd[2] = LSDW(init_fw_cb_dma);
 203         mbox_cmd[3] = MSDW(init_fw_cb_dma);
 204         mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk);
 205
 206         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
 207             QLA_SUCCESS) {
 208                 dma_free_coherent(&ha->pdev->dev,
 209                                   sizeof(struct init_fw_ctrl_blk),
 210                                   init_fw_cb, init_fw_cb_dma);
 211                 return status;
 212         }
 213
 214         /* Initialize request and response queues. */
 215         qla4xxx_init_rings(ha);
 216
 217         /* Fill in the request and response queue information. */
 218         init_fw_cb->pri.rqq_consumer_idx = cpu_to_le16(ha->request_out);
 219         init_fw_cb->pri.compq_producer_idx = cpu_to_le16(ha->response_in);
 220         init_fw_cb->pri.rqq_len = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH);
 221         init_fw_cb->pri.compq_len = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH);
 222         init_fw_cb->pri.rqq_addr_lo = cpu_to_le32(LSDW(ha->request_dma));
 223         init_fw_cb->pri.rqq_addr_hi = cpu_to_le32(MSDW(ha->request_dma));
 224         init_fw_cb->pri.compq_addr_lo = cpu_to_le32(LSDW(ha->response_dma));
 225         init_fw_cb->pri.compq_addr_hi = cpu_to_le32(MSDW(ha->response_dma));
 226         init_fw_cb->pri.shdwreg_addr_lo =
 227                 cpu_to_le32(LSDW(ha->shadow_regs_dma));
 228         init_fw_cb->pri.shdwreg_addr_hi =
 229                 cpu_to_le32(MSDW(ha->shadow_regs_dma));
 230
 231         /* Set up required options. */
 232         init_fw_cb->pri.fw_options |=
 233                 __constant_cpu_to_le16(FWOPT_SESSION_MODE |
 234                                        FWOPT_INITIATOR_MODE);
 235         init_fw_cb->pri.fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
 236
 237         /* Save some info in adapter structure. */
 238         ha->firmware_options = le16_to_cpu(init_fw_cb->pri.fw_options);
 239         ha->tcp_options = le16_to_cpu(init_fw_cb->pri.ipv4_tcp_opts);
 240         ha->heartbeat_interval = init_fw_cb->pri.hb_interval;
 241         memcpy(ha->ip_address, init_fw_cb->pri.ipv4_addr,
 242                min(sizeof(ha->ip_address), sizeof(init_fw_cb->pri.ipv4_addr)));
 243         memcpy(ha->subnet_mask, init_fw_cb->pri.ipv4_subnet,
 244                min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->pri.ipv4_subnet)));
 245         memcpy(ha->gateway, init_fw_cb->pri.ipv4_gw_addr,
 246                min(sizeof(ha->gateway), sizeof(init_fw_cb->pri.ipv4_gw_addr)));
 247         memcpy(ha->name_string, init_fw_cb->pri.iscsi_name,
 248                min(sizeof(ha->name_string),
 249                    sizeof(init_fw_cb->pri.iscsi_name)));
 250         /*memcpy(ha->alias, init_fw_cb->Alias,
 251                min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
 252
 253         /* Save Command Line Paramater info */
 254         ha->port_down_retry_count = le16_to_cpu(init_fw_cb->pri.conn_ka_timeout);
 255         ha->discovery_wait = ql4xdiscoverywait;
 256
 257         /* Send Initialize Firmware Control Block. */
 258         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 259         memset(&mbox_sts, 0, sizeof(mbox_sts));
 260
 261         mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
 262         mbox_cmd[1] = 0;
 263         mbox_cmd[2] = LSDW(init_fw_cb_dma);
 264         mbox_cmd[3] = MSDW(init_fw_cb_dma);
 265         mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk);
 266
 267         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) ==
 268             QLA_SUCCESS)
 269                 status = QLA_SUCCESS;
 270          else {
 271                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_INITIALIZE_FIRMWARE "
 272                               "failed w/ status %04X\n", ha->host_no, __func__,
 273                               mbox_sts[0]));
 274         }
 275         dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk),
 276                           init_fw_cb, init_fw_cb_dma);
 277
 278         return status;
 279 }
 280
 281 /**
 282  * qla4xxx_get_dhcp_ip_address - gets HBA ip address via DHCP
 283  * @ha: Pointer to host adapter structure.
 284  **/
 285 int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha)
 286 {
 287         struct init_fw_ctrl_blk *init_fw_cb;
 288         dma_addr_t init_fw_cb_dma;
 289         uint32_t mbox_cmd[MBOX_REG_COUNT];
 290         uint32_t mbox_sts[MBOX_REG_COUNT];
 291
 292         init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
 293                                         sizeof(struct init_fw_ctrl_blk),
 294                                         &init_fw_cb_dma, GFP_KERNEL);
 295         if (init_fw_cb == NULL) {
 296                 printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no,
 297                        __func__);
 298                 return 10;
 299         }
 300
 301         /* Get Initialize Firmware Control Block. */
 302         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 303         memset(&mbox_sts, 0, sizeof(mbox_sts));
 304
 305         memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk));
 306         mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
 307         mbox_cmd[2] = LSDW(init_fw_cb_dma);
 308         mbox_cmd[3] = MSDW(init_fw_cb_dma);
 309         mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk);
 310
 311         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
 312             QLA_SUCCESS) {
 313                 DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
 314                               ha->host_no, __func__));
 315                 dma_free_coherent(&ha->pdev->dev,
 316                                   sizeof(struct init_fw_ctrl_blk),
 317                                   init_fw_cb, init_fw_cb_dma);
 318                 return QLA_ERROR;
 319         }
 320
 321         /* Save IP Address. */
 322         memcpy(ha->ip_address, init_fw_cb->pri.ipv4_addr,
 323                min(sizeof(ha->ip_address), sizeof(init_fw_cb->pri.ipv4_addr)));
 324         memcpy(ha->subnet_mask, init_fw_cb->pri.ipv4_subnet,
 325                min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->pri.ipv4_subnet)));
 326         memcpy(ha->gateway, init_fw_cb->pri.ipv4_gw_addr,
 327                min(sizeof(ha->gateway), sizeof(init_fw_cb->pri.ipv4_gw_addr)));
 328
 329         dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk),
 330                           init_fw_cb, init_fw_cb_dma);
 331
 332         return QLA_SUCCESS;
 333 }
 334
 335 /**
 336  * qla4xxx_get_firmware_state - gets firmware state of HBA
 337  * @ha: Pointer to host adapter structure.
 338  **/
 339 int qla4xxx_get_firmware_state(struct scsi_qla_host * ha)
 340 {
 341         uint32_t mbox_cmd[MBOX_REG_COUNT];
 342         uint32_t mbox_sts[MBOX_REG_COUNT];
 343
 344         /* Get firmware version */
 345         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 346         memset(&mbox_sts, 0, sizeof(mbox_sts));
 347
 348         mbox_cmd[0] = MBOX_CMD_GET_FW_STATE;
 349
 350         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 4, &mbox_cmd[0], &mbox_sts[0]) !=
 351             QLA_SUCCESS) {
 352                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ "
 353                               "status %04X\n", ha->host_no, __func__,
 354                               mbox_sts[0]));
 355                 return QLA_ERROR;
 356         }
 357         ha->firmware_state = mbox_sts[1];
 358         ha->board_id = mbox_sts[2];
 359         ha->addl_fw_state = mbox_sts[3];
 360         DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n",
 361                       ha->host_no, __func__, ha->firmware_state);)
 362
 363                 return QLA_SUCCESS;
 364 }
 365
 366 /**
 367  * qla4xxx_get_firmware_status - retrieves firmware status
 368  * @ha: Pointer to host adapter structure.
 369  **/
 370 int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
 371 {
 372         uint32_t mbox_cmd[MBOX_REG_COUNT];
 373         uint32_t mbox_sts[MBOX_REG_COUNT];
 374
 375         /* Get firmware version */
 376         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 377         memset(&mbox_sts, 0, sizeof(mbox_sts));
 378
 379         mbox_cmd[0] = MBOX_CMD_GET_FW_STATUS;
 380
 381         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0], &mbox_sts[0]) !=
 382             QLA_SUCCESS) {
 383                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ "
 384                               "status %04X\n", ha->host_no, __func__,
 385                               mbox_sts[0]));
 386                 return QLA_ERROR;
 387         }
 388
 389         /* High-water mark of IOCBs */
 390         ha->iocb_hiwat = mbox_sts[2];
 391         if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
 392                 ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
 393         else
 394                 dev_info(&ha->pdev->dev, "WARNING!!!  You have less than %d "
 395                            "firmware IOCBs available (%d).\n",
 396                            IOCB_HIWAT_CUSHION, ha->iocb_hiwat);
 397
 398         return QLA_SUCCESS;
 399 }
 400
 401 /**
 402  * qla4xxx_get_fwddb_entry - retrieves firmware ddb entry
 403  * @ha: Pointer to host adapter structure.
 404  * @fw_ddb_index: Firmware's device database index
 405  * @fw_ddb_entry: Pointer to firmware's device database entry structure
 406  * @num_valid_ddb_entries: Pointer to number of valid ddb entries
 407  * @next_ddb_index: Pointer to next valid device database index
 408  * @fw_ddb_device_state: Pointer to device state
 409  **/
 410 int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha,
 411                             uint16_t fw_ddb_index,
 412                             struct dev_db_entry *fw_ddb_entry,
 413                             dma_addr_t fw_ddb_entry_dma,
 414                             uint32_t *num_valid_ddb_entries,
 415                             uint32_t *next_ddb_index,
 416                             uint32_t *fw_ddb_device_state,
 417                             uint32_t *conn_err_detail,
 418                             uint16_t *tcp_source_port_num,
 419                             uint16_t *connection_id)
 420 {
 421         int status = QLA_ERROR;
 422         uint32_t mbox_cmd[MBOX_REG_COUNT];
 423         uint32_t mbox_sts[MBOX_REG_COUNT];
 424
 425         /* Make sure the device index is valid */
 426         if (fw_ddb_index >= MAX_DDB_ENTRIES) {
 427                 DEBUG2(printk("scsi%ld: %s: index [%d] out of range.\n",
 428                               ha->host_no, __func__, fw_ddb_index));
 429                 goto exit_get_fwddb;
 430         }
 431         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 432         memset(&mbox_sts, 0, sizeof(mbox_sts));
 433
 434         mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY;
 435         mbox_cmd[1] = (uint32_t) fw_ddb_index;
 436         mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
 437         mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
 438         mbox_cmd[4] = sizeof(struct dev_db_entry);
 439
 440         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 7, &mbox_cmd[0], &mbox_sts[0]) ==
 441             QLA_ERROR) {
 442                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed"
 443                               " with status 0x%04X\n", ha->host_no, __func__,
 444                               mbox_sts[0]));
 445                 goto exit_get_fwddb;
 446         }
 447         if (fw_ddb_index != mbox_sts[1]) {
 448                 DEBUG2(printk("scsi%ld: %s: index mismatch [%d] != [%d].\n",
 449                               ha->host_no, __func__, fw_ddb_index,
 450                               mbox_sts[1]));
 451                 goto exit_get_fwddb;
 452         }
 453         if (fw_ddb_entry) {
 454                 dev_info(&ha->pdev->dev, "DDB[%d] MB0 %04x Tot %d Next %d "
 455                            "State %04x ConnErr %08x %d.%d.%d.%d:%04d \"%s\"\n",
 456                            fw_ddb_index, mbox_sts[0], mbox_sts[2], mbox_sts[3],
 457                            mbox_sts[4], mbox_sts[5], fw_ddb_entry->ip_addr[0],
 458                            fw_ddb_entry->ip_addr[1], fw_ddb_entry->ip_addr[2],
 459                            fw_ddb_entry->ip_addr[3],
 460                            le16_to_cpu(fw_ddb_entry->port),
 461                            fw_ddb_entry->iscsi_name);
 462         }
 463         if (num_valid_ddb_entries)
 464                 *num_valid_ddb_entries = mbox_sts[2];
 465         if (next_ddb_index)
 466                 *next_ddb_index = mbox_sts[3];
 467         if (fw_ddb_device_state)
 468                 *fw_ddb_device_state = mbox_sts[4];
 469
 470         /*
 471          * RA: This mailbox has been changed to pass connection error and
 472          * details.  Its true for ISP4010 as per Version E - Not sure when it
 473          * was changed.  Get the time2wait from the fw_dd_entry field :
 474          * default_time2wait which we call it as minTime2Wait DEV_DB_ENTRY
 475          * struct.
 476          */
 477         if (conn_err_detail)
 478                 *conn_err_detail = mbox_sts[5];
 479         if (tcp_source_port_num)
 480                 *tcp_source_port_num = (uint16_t) mbox_sts[6] >> 16;
 481         if (connection_id)
 482                 *connection_id = (uint16_t) mbox_sts[6] & 0x00FF;
 483         status = QLA_SUCCESS;
 484
 485 exit_get_fwddb:
 486         return status;
 487 }
 488
 489 /**
 490  * qla4xxx_set_fwddb_entry - sets a ddb entry.
 491  * @ha: Pointer to host adapter structure.
 492  * @fw_ddb_index: Firmware's device database index
 493  * @fw_ddb_entry: Pointer to firmware's ddb entry structure, or NULL.
 494  *
 495  * This routine initializes or updates the adapter's device database
 496  * entry for the specified device. It also triggers a login for the
 497  * specified device. Therefore, it may also be used as a secondary
 498  * login routine when a NULL pointer is specified for the fw_ddb_entry.
 499  **/
 500 int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index,
 501                           dma_addr_t fw_ddb_entry_dma)
 502 {
 503         uint32_t mbox_cmd[MBOX_REG_COUNT];
 504         uint32_t mbox_sts[MBOX_REG_COUNT];
 505
 506         /* Do not wait for completion. The firmware will send us an
 507          * ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status.
 508          */
 509         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 510         memset(&mbox_sts, 0, sizeof(mbox_sts));
 511
 512         mbox_cmd[0] = MBOX_CMD_SET_DATABASE_ENTRY;
 513         mbox_cmd[1] = (uint32_t) fw_ddb_index;
 514         mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
 515         mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
 516         mbox_cmd[4] = sizeof(struct dev_db_entry);
 517
 518         return qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]);
 519 }
 520
 521 /**
 522  * qla4xxx_get_crash_record - retrieves crash record.
 523  * @ha: Pointer to host adapter structure.
 524  *
 525  * This routine retrieves a crash record from the QLA4010 after an 8002h aen.
 526  **/
 527 void qla4xxx_get_crash_record(struct scsi_qla_host * ha)
 528 {
 529         uint32_t mbox_cmd[MBOX_REG_COUNT];
 530         uint32_t mbox_sts[MBOX_REG_COUNT];
 531         struct crash_record *crash_record = NULL;
 532         dma_addr_t crash_record_dma = 0;
 533         uint32_t crash_record_size = 0;
 534
 535         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 536         memset(&mbox_sts, 0, sizeof(mbox_cmd));
 537
 538         /* Get size of crash record. */
 539         mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
 540
 541         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
 542             QLA_SUCCESS) {
 543                 DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n",
 544                               ha->host_no, __func__));
 545                 goto exit_get_crash_record;
 546         }
 547         crash_record_size = mbox_sts[4];
 548         if (crash_record_size == 0) {
 549                 DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n",
 550                               ha->host_no, __func__));
 551                 goto exit_get_crash_record;
 552         }
 553
 554         /* Alloc Memory for Crash Record. */
 555         crash_record = dma_alloc_coherent(&ha->pdev->dev, crash_record_size,
 556                                           &crash_record_dma, GFP_KERNEL);
 557         if (crash_record == NULL)
 558                 goto exit_get_crash_record;
 559
 560         /* Get Crash Record. */
 561         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 562         memset(&mbox_sts, 0, sizeof(mbox_cmd));
 563
 564         mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
 565         mbox_cmd[2] = LSDW(crash_record_dma);
 566         mbox_cmd[3] = MSDW(crash_record_dma);
 567         mbox_cmd[4] = crash_record_size;
 568
 569         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
 570             QLA_SUCCESS)
 571                 goto exit_get_crash_record;
 572
 573         /* Dump Crash Record. */
 574
 575 exit_get_crash_record:
 576         if (crash_record)
 577                 dma_free_coherent(&ha->pdev->dev, crash_record_size,
 578                                   crash_record, crash_record_dma);
 579 }
 580
 581 /**
 582  * qla4xxx_get_conn_event_log - retrieves connection event log
 583  * @ha: Pointer to host adapter structure.
 584  **/
 585 void qla4xxx_get_conn_event_log(struct scsi_qla_host * ha)
 586 {
 587         uint32_t mbox_cmd[MBOX_REG_COUNT];
 588         uint32_t mbox_sts[MBOX_REG_COUNT];
 589         struct conn_event_log_entry *event_log = NULL;
 590         dma_addr_t event_log_dma = 0;
 591         uint32_t event_log_size = 0;
 592         uint32_t num_valid_entries;
 593         uint32_t      oldest_entry = 0;
 594         uint32_t        max_event_log_entries;
 595         uint8_t         i;
 596
 597
 598         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 599         memset(&mbox_sts, 0, sizeof(mbox_cmd));
 600
 601         /* Get size of crash record. */
 602         mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
 603
 604         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
 605             QLA_SUCCESS)
 606                 goto exit_get_event_log;
 607
 608         event_log_size = mbox_sts[4];
 609         if (event_log_size == 0)
 610                 goto exit_get_event_log;
 611
 612         /* Alloc Memory for Crash Record. */
 613         event_log = dma_alloc_coherent(&ha->pdev->dev, event_log_size,
 614                                        &event_log_dma, GFP_KERNEL);
 615         if (event_log == NULL)
 616                 goto exit_get_event_log;
 617
 618         /* Get Crash Record. */
 619         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 620         memset(&mbox_sts, 0, sizeof(mbox_cmd));
 621
 622         mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
 623         mbox_cmd[2] = LSDW(event_log_dma);
 624         mbox_cmd[3] = MSDW(event_log_dma);
 625
 626         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
 627             QLA_SUCCESS) {
 628                 DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event "
 629                               "log!\n", ha->host_no, __func__));
 630                 goto exit_get_event_log;
 631         }
 632
 633         /* Dump Event Log. */
 634         num_valid_entries = mbox_sts[1];
 635
 636         max_event_log_entries = event_log_size /
 637                 sizeof(struct conn_event_log_entry);
 638
 639         if (num_valid_entries > max_event_log_entries)
 640                 oldest_entry = num_valid_entries % max_event_log_entries;
 641
 642         DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
 643                       ha->host_no, num_valid_entries));
 644
 645         if (ql4xextended_error_logging == 3) {
 646                 if (oldest_entry == 0) {
 647                         /* Circular Buffer has not wrapped around */
 648                         for (i=0; i < num_valid_entries; i++) {
 649                                 qla4xxx_dump_buffer((uint8_t *)event_log+
 650                                                     (i*sizeof(*event_log)),
 651                                                     sizeof(*event_log));
 652                         }
 653                 }
 654                 else {
 655                         /* Circular Buffer has wrapped around -
 656                          * display accordingly*/
 657                         for (i=oldest_entry; i < max_event_log_entries; i++) {
 658                                 qla4xxx_dump_buffer((uint8_t *)event_log+
 659                                                     (i*sizeof(*event_log)),
 660                                                     sizeof(*event_log));
 661                         }
 662                         for (i=0; i < oldest_entry; i++) {
 663                                 qla4xxx_dump_buffer((uint8_t *)event_log+
 664                                                     (i*sizeof(*event_log)),
 665                                                     sizeof(*event_log));
 666                         }
 667                 }
 668         }
 669
 670 exit_get_event_log:
 671         if (event_log)
 672                 dma_free_coherent(&ha->pdev->dev, event_log_size, event_log,
 673                                   event_log_dma);
 674 }
 675
 676 /**
 677  * qla4xxx_reset_lun - issues LUN Reset
 678  * @ha: Pointer to host adapter structure.
 679  * @db_entry: Pointer to device database entry
 680  * @un_entry: Pointer to lun entry structure
 681  *
 682  * This routine performs a LUN RESET on the specified target/lun.
 683  * The caller must ensure that the ddb_entry and lun_entry pointers
 684  * are valid before calling this routine.
 685  **/
 686 int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
 687                       int lun)
 688 {
 689         uint32_t mbox_cmd[MBOX_REG_COUNT];
 690         uint32_t mbox_sts[MBOX_REG_COUNT];
 691         int status = QLA_SUCCESS;
 692
 693         DEBUG2(printk("scsi%ld:%d:%d: lun reset issued\n", ha->host_no,
 694                       ddb_entry->os_target_id, lun));
 695
 696         /*
 697          * Send lun reset command to ISP, so that the ISP will return all
 698          * outstanding requests with RESET status
 699          */
 700         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 701         memset(&mbox_sts, 0, sizeof(mbox_sts));
 702
 703         mbox_cmd[0] = MBOX_CMD_LUN_RESET;
 704         mbox_cmd[1] = ddb_entry->fw_ddb_index;
 705         mbox_cmd[2] = lun << 8;
 706         mbox_cmd[5] = 0x01;     /* Immediate Command Enable */
 707
 708         qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]);
 709         if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
 710             mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
 711                 status = QLA_ERROR;
 712
 713         return status;
 714 }
 715
 716 /**
 717  * qla4xxx_reset_target - issues target Reset
 718  * @ha: Pointer to host adapter structure.
 719  * @db_entry: Pointer to device database entry
 720  * @un_entry: Pointer to lun entry structure
 721  *
 722  * This routine performs a TARGET RESET on the specified target.
 723  * The caller must ensure that the ddb_entry pointers
 724  * are valid before calling this routine.
 725  **/
 726 int qla4xxx_reset_target(struct scsi_qla_host *ha,
 727                          struct ddb_entry *ddb_entry)
 728 {
 729         uint32_t mbox_cmd[MBOX_REG_COUNT];
 730         uint32_t mbox_sts[MBOX_REG_COUNT];
 731         int status = QLA_SUCCESS;
 732
 733         DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha->host_no,
 734                       ddb_entry->os_target_id));
 735
 736         /*
 737          * Send target reset command to ISP, so that the ISP will return all
 738          * outstanding requests with RESET status
 739          */
 740         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 741         memset(&mbox_sts, 0, sizeof(mbox_sts));
 742
 743         mbox_cmd[0] = MBOX_CMD_TARGET_WARM_RESET;
 744         mbox_cmd[1] = ddb_entry->fw_ddb_index;
 745         mbox_cmd[5] = 0x01;     /* Immediate Command Enable */
 746
 747         qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
 748                                 &mbox_sts[0]);
 749         if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
 750             mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
 751                 status = QLA_ERROR;
 752
 753         return status;
 754 }
 755
 756 int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr,
 757                       uint32_t offset, uint32_t len)
 758 {
 759         uint32_t mbox_cmd[MBOX_REG_COUNT];
 760         uint32_t mbox_sts[MBOX_REG_COUNT];
 761
 762         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 763         memset(&mbox_sts, 0, sizeof(mbox_sts));
 764
 765         mbox_cmd[0] = MBOX_CMD_READ_FLASH;
 766         mbox_cmd[1] = LSDW(dma_addr);
 767         mbox_cmd[2] = MSDW(dma_addr);
 768         mbox_cmd[3] = offset;
 769         mbox_cmd[4] = len;
 770
 771         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0], &mbox_sts[0]) !=
 772             QLA_SUCCESS) {
 773                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ "
 774                     "status %04X %04X, offset %08x, len %08x\n", ha->host_no,
 775                     __func__, mbox_sts[0], mbox_sts[1], offset, len));
 776                 return QLA_ERROR;
 777         }
 778         return QLA_SUCCESS;
 779 }
 780
 781 /**
 782  * qla4xxx_get_fw_version - gets firmware version
 783  * @ha: Pointer to host adapter structure.
 784  *
 785  * Retrieves the firmware version on HBA. In QLA4010, mailboxes 2 & 3 may
 786  * hold an address for data.  Make sure that we write 0 to those mailboxes,
 787  * if unused.
 788  **/
 789 int qla4xxx_get_fw_version(struct scsi_qla_host * ha)
 790 {
 791         uint32_t mbox_cmd[MBOX_REG_COUNT];
 792         uint32_t mbox_sts[MBOX_REG_COUNT];
 793
 794         /* Get firmware version. */
 795         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 796         memset(&mbox_sts, 0, sizeof(mbox_sts));
 797
 798         mbox_cmd[0] = MBOX_CMD_ABOUT_FW;
 799
 800         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
 801             QLA_SUCCESS) {
 802                 DEBUG2(printk("scsi%ld: %s: MBOX_CMD_ABOUT_FW failed w/ "
 803                     "status %04X\n", ha->host_no, __func__, mbox_sts[0]));
 804                 return QLA_ERROR;
 805         }
 806
 807         /* Save firmware version information. */
 808         ha->firmware_version[0] = mbox_sts[1];
 809         ha->firmware_version[1] = mbox_sts[2];
 810         ha->patch_number = mbox_sts[3];
 811         ha->build_number = mbox_sts[4];
 812
 813         return QLA_SUCCESS;
 814 }
 815
 816 static int qla4xxx_get_default_ddb(struct scsi_qla_host *ha,
 817                                    dma_addr_t dma_addr)
 818 {
 819         uint32_t mbox_cmd[MBOX_REG_COUNT];
 820         uint32_t mbox_sts[MBOX_REG_COUNT];
 821
 822         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 823         memset(&mbox_sts, 0, sizeof(mbox_sts));
 824
 825         mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS;
 826         mbox_cmd[2] = LSDW(dma_addr);
 827         mbox_cmd[3] = MSDW(dma_addr);
 828
 829         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
 830             QLA_SUCCESS) {
 831                 DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
 832                      ha->host_no, __func__, mbox_sts[0]));
 833                 return QLA_ERROR;
 834         }
 835         return QLA_SUCCESS;
 836 }
 837
 838 static int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t *ddb_index)
 839 {
 840         uint32_t mbox_cmd[MBOX_REG_COUNT];
 841         uint32_t mbox_sts[MBOX_REG_COUNT];
 842
 843         memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 844         memset(&mbox_sts, 0, sizeof(mbox_sts));
 845
 846         mbox_cmd[0] = MBOX_CMD_REQUEST_DATABASE_ENTRY;
 847         mbox_cmd[1] = MAX_PRST_DEV_DB_ENTRIES;
 848
 849         if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0], &mbox_sts[0]) !=
 850             QLA_SUCCESS) {
 851                 if (mbox_sts[0] == MBOX_STS_COMMAND_ERROR) {
 852                         *ddb_index = mbox_sts[2];
 853                 } else {
 854                         DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
 855                              ha->host_no, __func__, mbox_sts[0]));
 856                         return QLA_ERROR;
 857                 }
 858         } else {
 859                 *ddb_index = MAX_PRST_DEV_DB_ENTRIES;
 860         }
 861
 862         return QLA_SUCCESS;
 863 }
 864
 865
 866 int qla4xxx_send_tgts(struct scsi_qla_host *ha, char *ip, uint16_t port)
 867 {
 868         struct dev_db_entry *fw_ddb_entry;
 869         dma_addr_t fw_ddb_entry_dma;
 870         uint32_t ddb_index;
 871         int ret_val = QLA_SUCCESS;
 872
 873
 874         fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev,
 875                                           sizeof(*fw_ddb_entry),
 876                                           &fw_ddb_entry_dma, GFP_KERNEL);
 877         if (!fw_ddb_entry) {
 878                 DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
 879                               ha->host_no, __func__));
 880                 ret_val = QLA_ERROR;
 881                 goto qla4xxx_send_tgts_exit;
 882         }
 883
 884         ret_val = qla4xxx_get_default_ddb(ha, fw_ddb_entry_dma);
 885         if (ret_val != QLA_SUCCESS)
 886                 goto qla4xxx_send_tgts_exit;
 887
 888         ret_val = qla4xxx_req_ddb_entry(ha, &ddb_index);
 889         if (ret_val != QLA_SUCCESS)
 890                 goto qla4xxx_send_tgts_exit;
 891
 892         memset(fw_ddb_entry->iscsi_alias, 0,
 893                sizeof(fw_ddb_entry->iscsi_alias));
 894
 895         memset(fw_ddb_entry->iscsi_name, 0,
 896                sizeof(fw_ddb_entry->iscsi_name));
 897
 898         memset(fw_ddb_entry->ip_addr, 0, sizeof(fw_ddb_entry->ip_addr));
 899         memset(fw_ddb_entry->tgt_addr, 0,
 900                sizeof(fw_ddb_entry->tgt_addr));
 901
 902         fw_ddb_entry->options = (DDB_OPT_DISC_SESSION | DDB_OPT_TARGET);
 903         fw_ddb_entry->port = cpu_to_le16(ntohs(port));
 904
 905         fw_ddb_entry->ip_addr[0] = *ip;
 906         fw_ddb_entry->ip_addr[1] = *(ip + 1);
 907         fw_ddb_entry->ip_addr[2] = *(ip + 2);
 908         fw_ddb_entry->ip_addr[3] = *(ip + 3);
 909
 910         ret_val = qla4xxx_set_ddb_entry(ha, ddb_index, fw_ddb_entry_dma);
 911
 912 qla4xxx_send_tgts_exit:
 913         dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
 914                           fw_ddb_entry, fw_ddb_entry_dma);
 915         return ret_val;
 916 }
 917