git.oblomov.eu Git - linux-2.6/blob - drivers/scsi/sym53c8xx_2/sym_fw.c

   1 /*
   2  * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
   3  * of PCI-SCSI IO processors.
   4  *
   5  * Copyright (C) 1999-2001  Gerard Roudier <groudier@free.fr>
   6  *
   7  * This driver is derived from the Linux sym53c8xx driver.
   8  * Copyright (C) 1998-2000  Gerard Roudier
   9  *
  10  * The sym53c8xx driver is derived from the ncr53c8xx driver that had been
  11  * a port of the FreeBSD ncr driver to Linux-1.2.13.
  12  *
  13  * The original ncr driver has been written for 386bsd and FreeBSD by
  14  *         Wolfgang Stanglmeier        <wolf@cologne.de>
  15  *         Stefan Esser                <se@mi.Uni-Koeln.de>
  16  * Copyright (C) 1994  Wolfgang Stanglmeier
  17  *
  18  * Other major contributions:
  19  *
  20  * NVRAM detection and reading.
  21  * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
  22  *
  23  *-----------------------------------------------------------------------------
  24  *
  25  * This program is free software; you can redistribute it and/or modify
  26  * it under the terms of the GNU General Public License as published by
  27  * the Free Software Foundation; either version 2 of the License, or
  28  * (at your option) any later version.
  29  *
  30  * This program is distributed in the hope that it will be useful,
  31  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  32  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  33  * GNU General Public License for more details.
  34  *
  35  * You should have received a copy of the GNU General Public License
  36  * along with this program; if not, write to the Free Software
  37  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  38  */
  39
  40 #include "sym_glue.h"
  41
  42 /*
  43  *  Macros used for all firmwares.
  44  */
  45 #define SYM_GEN_A(s, label)     ((short) offsetof(s, label)),
  46 #define SYM_GEN_B(s, label)     ((short) offsetof(s, label)),
  47 #define SYM_GEN_Z(s, label)     ((short) offsetof(s, label)),
  48 #define PADDR_A(label)          SYM_GEN_PADDR_A(struct SYM_FWA_SCR, label)
  49 #define PADDR_B(label)          SYM_GEN_PADDR_B(struct SYM_FWB_SCR, label)
  50
  51
  52 #if     SYM_CONF_GENERIC_SUPPORT
  53 /*
  54  *  Allocate firmware #1 script area.
  55  */
  56 #define SYM_FWA_SCR             sym_fw1a_scr
  57 #define SYM_FWB_SCR             sym_fw1b_scr
  58 #define SYM_FWZ_SCR             sym_fw1z_scr
  59 #include "sym_fw1.h"
  60 static struct sym_fwa_ofs sym_fw1a_ofs = {
  61         SYM_GEN_FW_A(struct SYM_FWA_SCR)
  62 };
  63 static struct sym_fwb_ofs sym_fw1b_ofs = {
  64         SYM_GEN_FW_B(struct SYM_FWB_SCR)
  65 };
  66 static struct sym_fwz_ofs sym_fw1z_ofs = {
  67         SYM_GEN_FW_Z(struct SYM_FWZ_SCR)
  68 };
  69 #undef  SYM_FWA_SCR
  70 #undef  SYM_FWB_SCR
  71 #undef  SYM_FWZ_SCR
  72 #endif  /* SYM_CONF_GENERIC_SUPPORT */
  73
  74 /*
  75  *  Allocate firmware #2 script area.
  76  */
  77 #define SYM_FWA_SCR             sym_fw2a_scr
  78 #define SYM_FWB_SCR             sym_fw2b_scr
  79 #define SYM_FWZ_SCR             sym_fw2z_scr
  80 #include "sym_fw2.h"
  81 static struct sym_fwa_ofs sym_fw2a_ofs = {
  82         SYM_GEN_FW_A(struct SYM_FWA_SCR)
  83 };
  84 static struct sym_fwb_ofs sym_fw2b_ofs = {
  85         SYM_GEN_FW_B(struct SYM_FWB_SCR)
  86         SYM_GEN_B(struct SYM_FWB_SCR, start64)
  87         SYM_GEN_B(struct SYM_FWB_SCR, pm_handle)
  88 };
  89 static struct sym_fwz_ofs sym_fw2z_ofs = {
  90         SYM_GEN_FW_Z(struct SYM_FWZ_SCR)
  91 };
  92 #undef  SYM_FWA_SCR
  93 #undef  SYM_FWB_SCR
  94 #undef  SYM_FWZ_SCR
  95
  96 #undef  SYM_GEN_A
  97 #undef  SYM_GEN_B
  98 #undef  SYM_GEN_Z
  99 #undef  PADDR_A
 100 #undef  PADDR_B
 101
 102 #if     SYM_CONF_GENERIC_SUPPORT
 103 /*
 104  *  Patch routine for firmware #1.
 105  */
 106 static void
 107 sym_fw1_patch(struct Scsi_Host *shost)
 108 {
 109         struct sym_hcb *np = sym_get_hcb(shost);
 110         struct sym_fw1a_scr *scripta0;
 111         struct sym_fw1b_scr *scriptb0;
 112
 113         scripta0 = (struct sym_fw1a_scr *) np->scripta0;
 114         scriptb0 = (struct sym_fw1b_scr *) np->scriptb0;
 115
 116         /*
 117          *  Remove LED support if not needed.
 118          */
 119         if (!(np->features & FE_LED0)) {
 120                 scripta0->idle[0]       = cpu_to_scr(SCR_NO_OP);
 121                 scripta0->reselected[0] = cpu_to_scr(SCR_NO_OP);
 122                 scripta0->start[0]      = cpu_to_scr(SCR_NO_OP);
 123         }
 124
 125 #ifdef SYM_CONF_IARB_SUPPORT
 126         /*
 127          *    If user does not want to use IMMEDIATE ARBITRATION
 128          *    when we are reselected while attempting to arbitrate,
 129          *    patch the SCRIPTS accordingly with a SCRIPT NO_OP.
 130          */
 131         if (!SYM_CONF_SET_IARB_ON_ARB_LOST)
 132                 scripta0->ungetjob[0] = cpu_to_scr(SCR_NO_OP);
 133 #endif
 134         /*
 135          *  Patch some data in SCRIPTS.
 136          *  - start and done queue initial bus address.
 137          *  - target bus address table bus address.
 138          */
 139         scriptb0->startpos[0]   = cpu_to_scr(np->squeue_ba);
 140         scriptb0->done_pos[0]   = cpu_to_scr(np->dqueue_ba);
 141         scriptb0->targtbl[0]    = cpu_to_scr(np->targtbl_ba);
 142 }
 143 #endif  /* SYM_CONF_GENERIC_SUPPORT */
 144
 145 /*
 146  *  Patch routine for firmware #2.
 147  */
 148 static void
 149 sym_fw2_patch(struct Scsi_Host *shost)
 150 {
 151         struct sym_data *sym_data = shost_priv(shost);
 152         struct pci_dev *pdev = sym_data->pdev;
 153         struct sym_hcb *np = sym_data->ncb;
 154         struct sym_fw2a_scr *scripta0;
 155         struct sym_fw2b_scr *scriptb0;
 156
 157         scripta0 = (struct sym_fw2a_scr *) np->scripta0;
 158         scriptb0 = (struct sym_fw2b_scr *) np->scriptb0;
 159
 160         /*
 161          *  Remove LED support if not needed.
 162          */
 163         if (!(np->features & FE_LED0)) {
 164                 scripta0->idle[0]       = cpu_to_scr(SCR_NO_OP);
 165                 scripta0->reselected[0] = cpu_to_scr(SCR_NO_OP);
 166                 scripta0->start[0]      = cpu_to_scr(SCR_NO_OP);
 167         }
 168
 169 #if   SYM_CONF_DMA_ADDRESSING_MODE == 2
 170         /*
 171          *  Remove useless 64 bit DMA specific SCRIPTS,
 172          *  when this feature is not available.
 173          */
 174         if (!use_dac(np)) {
 175                 scripta0->is_dmap_dirty[0] = cpu_to_scr(SCR_NO_OP);
 176                 scripta0->is_dmap_dirty[1] = 0;
 177                 scripta0->is_dmap_dirty[2] = cpu_to_scr(SCR_NO_OP);
 178                 scripta0->is_dmap_dirty[3] = 0;
 179         }
 180 #endif
 181
 182 #ifdef SYM_CONF_IARB_SUPPORT
 183         /*
 184          *    If user does not want to use IMMEDIATE ARBITRATION
 185          *    when we are reselected while attempting to arbitrate,
 186          *    patch the SCRIPTS accordingly with a SCRIPT NO_OP.
 187          */
 188         if (!SYM_CONF_SET_IARB_ON_ARB_LOST)
 189                 scripta0->ungetjob[0] = cpu_to_scr(SCR_NO_OP);
 190 #endif
 191         /*
 192          *  Patch some variable in SCRIPTS.
 193          *  - start and done queue initial bus address.
 194          *  - target bus address table bus address.
 195          */
 196         scriptb0->startpos[0]   = cpu_to_scr(np->squeue_ba);
 197         scriptb0->done_pos[0]   = cpu_to_scr(np->dqueue_ba);
 198         scriptb0->targtbl[0]    = cpu_to_scr(np->targtbl_ba);
 199
 200         /*
 201          *  Remove the load of SCNTL4 on reselection if not a C10.
 202          */
 203         if (!(np->features & FE_C10)) {
 204                 scripta0->resel_scntl4[0] = cpu_to_scr(SCR_NO_OP);
 205                 scripta0->resel_scntl4[1] = cpu_to_scr(0);
 206         }
 207
 208         /*
 209          *  Remove a couple of work-arounds specific to C1010 if
 210          *  they are not desirable. See `sym_fw2.h' for more details.
 211          */
 212         if (!(pdev->device == PCI_DEVICE_ID_LSI_53C1010_66 &&
 213               pdev->revision < 0x1 &&
 214               np->pciclk_khz < 60000)) {
 215                 scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP);
 216                 scripta0->datao_phase[1] = cpu_to_scr(0);
 217         }
 218         if (!(pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 /* &&
 219               pdev->revision < 0xff */)) {
 220                 scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP);
 221                 scripta0->sel_done[1] = cpu_to_scr(0);
 222         }
 223
 224         /*
 225          *  Patch some other variables in SCRIPTS.
 226          *  These ones are loaded by the SCRIPTS processor.
 227          */
 228         scriptb0->pm0_data_addr[0] =
 229                 cpu_to_scr(np->scripta_ba +
 230                            offsetof(struct sym_fw2a_scr, pm0_data));
 231         scriptb0->pm1_data_addr[0] =
 232                 cpu_to_scr(np->scripta_ba +
 233                            offsetof(struct sym_fw2a_scr, pm1_data));
 234 }
 235
 236 /*
 237  *  Fill the data area in scripts.
 238  *  To be done for all firmwares.
 239  */
 240 static void
 241 sym_fw_fill_data (u32 *in, u32 *out)
 242 {
 243         int     i;
 244
 245         for (i = 0; i < SYM_CONF_MAX_SG; i++) {
 246                 *in++  = SCR_CHMOV_TBL ^ SCR_DATA_IN;
 247                 *in++  = offsetof (struct sym_dsb, data[i]);
 248                 *out++ = SCR_CHMOV_TBL ^ SCR_DATA_OUT;
 249                 *out++ = offsetof (struct sym_dsb, data[i]);
 250         }
 251 }
 252
 253 /*
 254  *  Setup useful script bus addresses.
 255  *  To be done for all firmwares.
 256  */
 257 static void
 258 sym_fw_setup_bus_addresses(struct sym_hcb *np, struct sym_fw *fw)
 259 {
 260         u32 *pa;
 261         u_short *po;
 262         int i;
 263
 264         /*
 265          *  Build the bus address table for script A
 266          *  from the script A offset table.
 267          */
 268         po = (u_short *) fw->a_ofs;
 269         pa = (u32 *) &np->fwa_bas;
 270         for (i = 0 ; i < sizeof(np->fwa_bas)/sizeof(u32) ; i++)
 271                 pa[i] = np->scripta_ba + po[i];
 272
 273         /*
 274          *  Same for script B.
 275          */
 276         po = (u_short *) fw->b_ofs;
 277         pa = (u32 *) &np->fwb_bas;
 278         for (i = 0 ; i < sizeof(np->fwb_bas)/sizeof(u32) ; i++)
 279                 pa[i] = np->scriptb_ba + po[i];
 280
 281         /*
 282          *  Same for script Z.
 283          */
 284         po = (u_short *) fw->z_ofs;
 285         pa = (u32 *) &np->fwz_bas;
 286         for (i = 0 ; i < sizeof(np->fwz_bas)/sizeof(u32) ; i++)
 287                 pa[i] = np->scriptz_ba + po[i];
 288 }
 289
 290 #if     SYM_CONF_GENERIC_SUPPORT
 291 /*
 292  *  Setup routine for firmware #1.
 293  */
 294 static void
 295 sym_fw1_setup(struct sym_hcb *np, struct sym_fw *fw)
 296 {
 297         struct sym_fw1a_scr *scripta0;
 298         struct sym_fw1b_scr *scriptb0;
 299
 300         scripta0 = (struct sym_fw1a_scr *) np->scripta0;
 301         scriptb0 = (struct sym_fw1b_scr *) np->scriptb0;
 302
 303         /*
 304          *  Fill variable parts in scripts.
 305          */
 306         sym_fw_fill_data(scripta0->data_in, scripta0->data_out);
 307
 308         /*
 309          *  Setup bus addresses used from the C code..
 310          */
 311         sym_fw_setup_bus_addresses(np, fw);
 312 }
 313 #endif  /* SYM_CONF_GENERIC_SUPPORT */
 314
 315 /*
 316  *  Setup routine for firmware #2.
 317  */
 318 static void
 319 sym_fw2_setup(struct sym_hcb *np, struct sym_fw *fw)
 320 {
 321         struct sym_fw2a_scr *scripta0;
 322         struct sym_fw2b_scr *scriptb0;
 323
 324         scripta0 = (struct sym_fw2a_scr *) np->scripta0;
 325         scriptb0 = (struct sym_fw2b_scr *) np->scriptb0;
 326
 327         /*
 328          *  Fill variable parts in scripts.
 329          */
 330         sym_fw_fill_data(scripta0->data_in, scripta0->data_out);
 331
 332         /*
 333          *  Setup bus addresses used from the C code..
 334          */
 335         sym_fw_setup_bus_addresses(np, fw);
 336 }
 337
 338 /*
 339  *  Allocate firmware descriptors.
 340  */
 341 #if     SYM_CONF_GENERIC_SUPPORT
 342 static struct sym_fw sym_fw1 = SYM_FW_ENTRY(sym_fw1, "NCR-generic");
 343 #endif  /* SYM_CONF_GENERIC_SUPPORT */
 344 static struct sym_fw sym_fw2 = SYM_FW_ENTRY(sym_fw2, "LOAD/STORE-based");
 345
 346 /*
 347  *  Find the most appropriate firmware for a chip.
 348  */
 349 struct sym_fw *
 350 sym_find_firmware(struct sym_chip *chip)
 351 {
 352         if (chip->features & FE_LDSTR)
 353                 return &sym_fw2;
 354 #if     SYM_CONF_GENERIC_SUPPORT
 355         else if (!(chip->features & (FE_PFEN|FE_NOPM|FE_DAC)))
 356                 return &sym_fw1;
 357 #endif
 358         else
 359                 return NULL;
 360 }
 361
 362 /*
 363  *  Bind a script to physical addresses.
 364  */
 365 void sym_fw_bind_script(struct sym_hcb *np, u32 *start, int len)
 366 {
 367         u32 opcode, new, old, tmp1, tmp2;
 368         u32 *end, *cur;
 369         int relocs;
 370
 371         cur = start;
 372         end = start + len/4;
 373
 374         while (cur < end) {
 375
 376                 opcode = *cur;
 377
 378                 /*
 379                  *  If we forget to change the length
 380                  *  in scripts, a field will be
 381                  *  padded with 0. This is an illegal
 382                  *  command.
 383                  */
 384                 if (opcode == 0) {
 385                         printf ("%s: ERROR0 IN SCRIPT at %d.\n",
 386                                 sym_name(np), (int) (cur-start));
 387                         ++cur;
 388                         continue;
 389                 };
 390
 391                 /*
 392                  *  We use the bogus value 0xf00ff00f ;-)
 393                  *  to reserve data area in SCRIPTS.
 394                  */
 395                 if (opcode == SCR_DATA_ZERO) {
 396                         *cur++ = 0;
 397                         continue;
 398                 }
 399
 400                 if (DEBUG_FLAGS & DEBUG_SCRIPT)
 401                         printf ("%d:  <%x>\n", (int) (cur-start),
 402                                 (unsigned)opcode);
 403
 404                 /*
 405                  *  We don't have to decode ALL commands
 406                  */
 407                 switch (opcode >> 28) {
 408                 case 0xf:
 409                         /*
 410                          *  LOAD / STORE DSA relative, don't relocate.
 411                          */
 412                         relocs = 0;
 413                         break;
 414                 case 0xe:
 415                         /*
 416                          *  LOAD / STORE absolute.
 417                          */
 418                         relocs = 1;
 419                         break;
 420                 case 0xc:
 421                         /*
 422                          *  COPY has TWO arguments.
 423                          */
 424                         relocs = 2;
 425                         tmp1 = cur[1];
 426                         tmp2 = cur[2];
 427                         if ((tmp1 ^ tmp2) & 3) {
 428                                 printf ("%s: ERROR1 IN SCRIPT at %d.\n",
 429                                         sym_name(np), (int) (cur-start));
 430                         }
 431                         /*
 432                          *  If PREFETCH feature not enabled, remove
 433                          *  the NO FLUSH bit if present.
 434                          */
 435                         if ((opcode & SCR_NO_FLUSH) &&
 436                             !(np->features & FE_PFEN)) {
 437                                 opcode = (opcode & ~SCR_NO_FLUSH);
 438                         }
 439                         break;
 440                 case 0x0:
 441                         /*
 442                          *  MOVE/CHMOV (absolute address)
 443                          */
 444                         if (!(np->features & FE_WIDE))
 445                                 opcode = (opcode | OPC_MOVE);
 446                         relocs = 1;
 447                         break;
 448                 case 0x1:
 449                         /*
 450                          *  MOVE/CHMOV (table indirect)
 451                          */
 452                         if (!(np->features & FE_WIDE))
 453                                 opcode = (opcode | OPC_MOVE);
 454                         relocs = 0;
 455                         break;
 456 #ifdef SYM_CONF_TARGET_ROLE_SUPPORT
 457                 case 0x2:
 458                         /*
 459                          *  MOVE/CHMOV in target role (absolute address)
 460                          */
 461                         opcode &= ~0x20000000;
 462                         if (!(np->features & FE_WIDE))
 463                                 opcode = (opcode & ~OPC_TCHMOVE);
 464                         relocs = 1;
 465                         break;
 466                 case 0x3:
 467                         /*
 468                          *  MOVE/CHMOV in target role (table indirect)
 469                          */
 470                         opcode &= ~0x20000000;
 471                         if (!(np->features & FE_WIDE))
 472                                 opcode = (opcode & ~OPC_TCHMOVE);
 473                         relocs = 0;
 474                         break;
 475 #endif
 476                 case 0x8:
 477                         /*
 478                          *  JUMP / CALL
 479                          *  don't relocate if relative :-)
 480                          */
 481                         if (opcode & 0x00800000)
 482                                 relocs = 0;
 483                         else if ((opcode & 0xf8400000) == 0x80400000)/*JUMP64*/
 484                                 relocs = 2;
 485                         else
 486                                 relocs = 1;
 487                         break;
 488                 case 0x4:
 489                 case 0x5:
 490                 case 0x6:
 491                 case 0x7:
 492                         relocs = 1;
 493                         break;
 494                 default:
 495                         relocs = 0;
 496                         break;
 497                 };
 498
 499                 /*
 500                  *  Scriptify:) the opcode.
 501                  */
 502                 *cur++ = cpu_to_scr(opcode);
 503
 504                 /*
 505                  *  If no relocation, assume 1 argument
 506                  *  and just scriptize:) it.
 507                  */
 508                 if (!relocs) {
 509                         *cur = cpu_to_scr(*cur);
 510                         ++cur;
 511                         continue;
 512                 }
 513
 514                 /*
 515                  *  Otherwise performs all needed relocations.
 516                  */
 517                 while (relocs--) {
 518                         old = *cur;
 519
 520                         switch (old & RELOC_MASK) {
 521                         case RELOC_REGISTER:
 522                                 new = (old & ~RELOC_MASK) + np->mmio_ba;
 523                                 break;
 524                         case RELOC_LABEL_A:
 525                                 new = (old & ~RELOC_MASK) + np->scripta_ba;
 526                                 break;
 527                         case RELOC_LABEL_B:
 528                                 new = (old & ~RELOC_MASK) + np->scriptb_ba;
 529                                 break;
 530                         case RELOC_SOFTC:
 531                                 new = (old & ~RELOC_MASK) + np->hcb_ba;
 532                                 break;
 533                         case 0:
 534                                 /*
 535                                  *  Don't relocate a 0 address.
 536                                  *  They are mostly used for patched or
 537                                  *  script self-modified areas.
 538                                  */
 539                                 if (old == 0) {
 540                                         new = old;
 541                                         break;
 542                                 }
 543                                 /* fall through */
 544                         default:
 545                                 new = 0;
 546                                 panic("sym_fw_bind_script: "
 547                                       "weird relocation %x\n", old);
 548                                 break;
 549                         }
 550
 551                         *cur++ = cpu_to_scr(new);
 552                 }
 553         };
 554 }