git.oblomov.eu Git - linux-2.6/blob - drivers/char/riscom8.c

   1 /*
   2  *      linux/drivers/char/riscom.c  -- RISCom/8 multiport serial driver.
   3  *
   4  *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
   5  *
   6  *      This code is loosely based on the Linux serial driver, written by
   7  *      Linus Torvalds, Theodore T'so and others. The RISCom/8 card
   8  *      programming info was obtained from various drivers for other OSes
   9  *      (FreeBSD, ISC, etc), but no source code from those drivers were
  10  *      directly included in this driver.
  11  *
  12  *
  13  *      This program is free software; you can redistribute it and/or modify
  14  *      it under the terms of the GNU General Public License as published by
  15  *      the Free Software Foundation; either version 2 of the License, or
  16  *      (at your option) any later version.
  17  *
  18  *      This program is distributed in the hope that it will be useful,
  19  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *      GNU General Public License for more details.
  22  *
  23  *      You should have received a copy of the GNU General Public License
  24  *      along with this program; if not, write to the Free Software
  25  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  *
  27  *      Revision 1.1
  28  *
  29  *      ChangeLog:
  30  *      Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 27-Jun-2001
  31  *      - get rid of check_region and several cleanups
  32  */
  33
  34 #include <linux/module.h>
  35
  36 #include <asm/io.h>
  37 #include <linux/kernel.h>
  38 #include <linux/sched.h>
  39 #include <linux/ioport.h>
  40 #include <linux/interrupt.h>
  41 #include <linux/errno.h>
  42 #include <linux/tty.h>
  43 #include <linux/mm.h>
  44 #include <linux/serial.h>
  45 #include <linux/fcntl.h>
  46 #include <linux/major.h>
  47 #include <linux/init.h>
  48 #include <linux/delay.h>
  49 #include <linux/tty_flip.h>
  50 #include <linux/spinlock.h>
  51
  52 #include <asm/uaccess.h>
  53
  54 #include "riscom8.h"
  55 #include "riscom8_reg.h"
  56
  57 /* Am I paranoid or not ? ;-) */
  58 #define RISCOM_PARANOIA_CHECK
  59
  60 /*
  61  * Crazy InteliCom/8 boards sometimes has swapped CTS & DSR signals.
  62  * You can slightly speed up things by #undefing the following option,
  63  * if you are REALLY sure that your board is correct one.
  64  */
  65
  66 #define RISCOM_BRAIN_DAMAGED_CTS
  67
  68 /*
  69  * The following defines are mostly for testing purposes. But if you need
  70  * some nice reporting in your syslog, you can define them also.
  71  */
  72 #undef RC_REPORT_FIFO
  73 #undef RC_REPORT_OVERRUN
  74
  75
  76 #define RISCOM_LEGAL_FLAGS \
  77         (ASYNC_HUP_NOTIFY   | ASYNC_SAK          | ASYNC_SPLIT_TERMIOS   | \
  78          ASYNC_SPD_HI       | ASYNC_SPEED_VHI    | ASYNC_SESSION_LOCKOUT | \
  79          ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
  80
  81 static struct tty_driver *riscom_driver;
  82
  83 static DEFINE_SPINLOCK(riscom_lock);
  84
  85 static struct riscom_board rc_board[RC_NBOARD] =  {
  86         {
  87                 .base   = RC_IOBASE1,
  88         },
  89         {
  90                 .base   = RC_IOBASE2,
  91         },
  92         {
  93                 .base   = RC_IOBASE3,
  94         },
  95         {
  96                 .base   = RC_IOBASE4,
  97         },
  98 };
  99
 100 static struct riscom_port rc_port[RC_NBOARD * RC_NPORT];
 101
 102 /* RISCom/8 I/O ports addresses (without address translation) */
 103 static unsigned short rc_ioport[] =  {
 104 #if 1
 105         0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c,
 106 #else
 107         0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10,
 108         0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62,
 109         0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101
 110 #endif
 111 };
 112 #define RC_NIOPORT      ARRAY_SIZE(rc_ioport)
 113
 114
 115 static inline int rc_paranoia_check(struct riscom_port const * port,
 116                                     char *name, const char *routine)
 117 {
 118 #ifdef RISCOM_PARANOIA_CHECK
 119         static const char badmagic[] = KERN_INFO
 120                 "rc: Warning: bad riscom port magic number for device %s in %s\n";
 121         static const char badinfo[] = KERN_INFO
 122                 "rc: Warning: null riscom port for device %s in %s\n";
 123
 124         if (!port) {
 125                 printk(badinfo, name, routine);
 126                 return 1;
 127         }
 128         if (port->magic != RISCOM8_MAGIC) {
 129                 printk(badmagic, name, routine);
 130                 return 1;
 131         }
 132 #endif
 133         return 0;
 134 }
 135
 136 /*
 137  *
 138  *  Service functions for RISCom/8 driver.
 139  *
 140  */
 141
 142 /* Get board number from pointer */
 143 static inline int board_No (struct riscom_board const * bp)
 144 {
 145         return bp - rc_board;
 146 }
 147
 148 /* Get port number from pointer */
 149 static inline int port_No (struct riscom_port const * port)
 150 {
 151         return RC_PORT(port - rc_port);
 152 }
 153
 154 /* Get pointer to board from pointer to port */
 155 static inline struct riscom_board * port_Board(struct riscom_port const * port)
 156 {
 157         return &rc_board[RC_BOARD(port - rc_port)];
 158 }
 159
 160 /* Input Byte from CL CD180 register */
 161 static inline unsigned char rc_in(struct riscom_board const * bp, unsigned short reg)
 162 {
 163         return inb(bp->base + RC_TO_ISA(reg));
 164 }
 165
 166 /* Output Byte to CL CD180 register */
 167 static inline void rc_out(struct riscom_board const * bp, unsigned short reg,
 168                           unsigned char val)
 169 {
 170         outb(val, bp->base + RC_TO_ISA(reg));
 171 }
 172
 173 /* Wait for Channel Command Register ready */
 174 static inline void rc_wait_CCR(struct riscom_board const * bp)
 175 {
 176         unsigned long delay;
 177
 178         /* FIXME: need something more descriptive then 100000 :) */
 179         for (delay = 100000; delay; delay--)
 180                 if (!rc_in(bp, CD180_CCR))
 181                         return;
 182
 183         printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp));
 184 }
 185
 186 /*
 187  *  RISCom/8 probe functions.
 188  */
 189
 190 static inline int rc_request_io_range(struct riscom_board * const bp)
 191 {
 192         int i;
 193
 194         for (i = 0; i < RC_NIOPORT; i++)
 195                 if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1,
 196                                    "RISCom/8"))  {
 197                         goto out_release;
 198                 }
 199         return 0;
 200 out_release:
 201         printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n",
 202                          board_No(bp), bp->base);
 203         while(--i >= 0)
 204                 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
 205         return 1;
 206 }
 207
 208 static inline void rc_release_io_range(struct riscom_board * const bp)
 209 {
 210         int i;
 211
 212         for (i = 0; i < RC_NIOPORT; i++)
 213                 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
 214 }
 215
 216 /* Reset and setup CD180 chip */
 217 static void __init rc_init_CD180(struct riscom_board const * bp)
 218 {
 219         unsigned long flags;
 220
 221         spin_lock_irqsave(&riscom_lock, flags);
 222
 223         rc_out(bp, RC_CTOUT, 0);                   /* Clear timeout             */
 224         rc_wait_CCR(bp);                           /* Wait for CCR ready        */
 225         rc_out(bp, CD180_CCR, CCR_HARDRESET);      /* Reset CD180 chip          */
 226         spin_unlock_irqrestore(&riscom_lock, flags);
 227         msleep(50);                                /* Delay 0.05 sec            */
 228         spin_lock_irqsave(&riscom_lock, flags);
 229         rc_out(bp, CD180_GIVR, RC_ID);             /* Set ID for this chip      */
 230         rc_out(bp, CD180_GICR, 0);                 /* Clear all bits            */
 231         rc_out(bp, CD180_PILR1, RC_ACK_MINT);      /* Prio for modem intr       */
 232         rc_out(bp, CD180_PILR2, RC_ACK_TINT);      /* Prio for transmitter intr */
 233         rc_out(bp, CD180_PILR3, RC_ACK_RINT);      /* Prio for receiver intr    */
 234
 235         /* Setting up prescaler. We need 4 ticks per 1 ms */
 236         rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
 237         rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
 238
 239         spin_unlock_irqrestore(&riscom_lock, flags);
 240 }
 241
 242 /* Main probing routine, also sets irq. */
 243 static int __init rc_probe(struct riscom_board *bp)
 244 {
 245         unsigned char val1, val2;
 246         int irqs = 0;
 247         int retries;
 248
 249         bp->irq = 0;
 250
 251         if (rc_request_io_range(bp))
 252                 return 1;
 253
 254         /* Are the I/O ports here ? */
 255         rc_out(bp, CD180_PPRL, 0x5a);
 256         outb(0xff, 0x80);
 257         val1 = rc_in(bp, CD180_PPRL);
 258         rc_out(bp, CD180_PPRL, 0xa5);
 259         outb(0x00, 0x80);
 260         val2 = rc_in(bp, CD180_PPRL);
 261
 262         if ((val1 != 0x5a) || (val2 != 0xa5))  {
 263                 printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n",
 264                        board_No(bp), bp->base);
 265                 goto out_release;
 266         }
 267
 268         /* It's time to find IRQ for this board */
 269         for (retries = 0; retries < 5 && irqs <= 0; retries++)  {
 270                 irqs = probe_irq_on();
 271                 rc_init_CD180(bp);                      /* Reset CD180 chip       */
 272                 rc_out(bp, CD180_CAR, 2);               /* Select port 2          */
 273                 rc_wait_CCR(bp);
 274                 rc_out(bp, CD180_CCR, CCR_TXEN);        /* Enable transmitter     */
 275                 rc_out(bp, CD180_IER, IER_TXRDY);       /* Enable tx empty intr   */
 276                 msleep(50);
 277                 irqs = probe_irq_off(irqs);
 278                 val1 = rc_in(bp, RC_BSR);               /* Get Board Status reg   */
 279                 val2 = rc_in(bp, RC_ACK_TINT);          /* ACK interrupt          */
 280                 rc_init_CD180(bp);                      /* Reset CD180 again      */
 281
 282                 if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX)))  {
 283                         printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not "
 284                                         "found.\n", board_No(bp), bp->base);
 285                         goto out_release;
 286                 }
 287         }
 288
 289         if (irqs <= 0)  {
 290                 printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board "
 291                                 "at 0x%03x.\n", board_No(bp), bp->base);
 292                 goto out_release;
 293         }
 294         bp->irq = irqs;
 295         bp->flags |= RC_BOARD_PRESENT;
 296
 297         printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at "
 298                          "0x%03x, IRQ %d.\n",
 299                board_No(bp),
 300                (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A',   /* Board revision */
 301                bp->base, bp->irq);
 302
 303         return 0;
 304 out_release:
 305         rc_release_io_range(bp);
 306         return 1;
 307 }
 308
 309 /*
 310  *
 311  *  Interrupt processing routines.
 312  *
 313  */
 314
 315 static inline struct riscom_port * rc_get_port(struct riscom_board const * bp,
 316                                                unsigned char const * what)
 317 {
 318         unsigned char channel;
 319         struct riscom_port * port;
 320
 321         channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
 322         if (channel < CD180_NCH)  {
 323                 port = &rc_port[board_No(bp) * RC_NPORT + channel];
 324                 if (port->flags & ASYNC_INITIALIZED)  {
 325                         return port;
 326                 }
 327         }
 328         printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
 329                board_No(bp), what, channel);
 330         return NULL;
 331 }
 332
 333 static inline void rc_receive_exc(struct riscom_board const * bp)
 334 {
 335         struct riscom_port *port;
 336         struct tty_struct *tty;
 337         unsigned char status;
 338         unsigned char ch, flag;
 339
 340         if (!(port = rc_get_port(bp, "Receive")))
 341                 return;
 342
 343         tty = port->tty;
 344
 345 #ifdef RC_REPORT_OVERRUN
 346         status = rc_in(bp, CD180_RCSR);
 347         if (status & RCSR_OE)
 348                 port->overrun++;
 349         status &= port->mark_mask;
 350 #else
 351         status = rc_in(bp, CD180_RCSR) & port->mark_mask;
 352 #endif
 353         ch = rc_in(bp, CD180_RDR);
 354         if (!status)  {
 355                 return;
 356         }
 357         if (status & RCSR_TOUT)  {
 358                 printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
 359                                     "Hardware problems ?\n",
 360                        board_No(bp), port_No(port));
 361                 return;
 362
 363         } else if (status & RCSR_BREAK)  {
 364                 printk(KERN_INFO "rc%d: port %d: Handling break...\n",
 365                        board_No(bp), port_No(port));
 366                 flag = TTY_BREAK;
 367                 if (port->flags & ASYNC_SAK)
 368                         do_SAK(tty);
 369
 370         } else if (status & RCSR_PE)
 371                 flag = TTY_PARITY;
 372
 373         else if (status & RCSR_FE)
 374                 flag = TTY_FRAME;
 375
 376         else if (status & RCSR_OE)
 377                 flag = TTY_OVERRUN;
 378
 379         else
 380                 flag = TTY_NORMAL;
 381
 382         tty_insert_flip_char(tty, ch, flag);
 383         tty_flip_buffer_push(tty);
 384 }
 385
 386 static inline void rc_receive(struct riscom_board const * bp)
 387 {
 388         struct riscom_port *port;
 389         struct tty_struct *tty;
 390         unsigned char count;
 391
 392         if (!(port = rc_get_port(bp, "Receive")))
 393                 return;
 394
 395         tty = port->tty;
 396
 397         count = rc_in(bp, CD180_RDCR);
 398
 399 #ifdef RC_REPORT_FIFO
 400         port->hits[count > 8 ? 9 : count]++;
 401 #endif
 402
 403         while (count--)  {
 404                 if (tty_buffer_request_room(tty, 1) == 0)  {
 405                         printk(KERN_WARNING "rc%d: port %d: Working around "
 406                                             "flip buffer overflow.\n",
 407                                board_No(bp), port_No(port));
 408                         break;
 409                 }
 410                 tty_insert_flip_char(tty, rc_in(bp, CD180_RDR), TTY_NORMAL);
 411         }
 412         tty_flip_buffer_push(tty);
 413 }
 414
 415 static inline void rc_transmit(struct riscom_board const * bp)
 416 {
 417         struct riscom_port *port;
 418         struct tty_struct *tty;
 419         unsigned char count;
 420
 421
 422         if (!(port = rc_get_port(bp, "Transmit")))
 423                 return;
 424
 425         tty = port->tty;
 426
 427         if (port->IER & IER_TXEMPTY)  {
 428                 /* FIFO drained */
 429                 rc_out(bp, CD180_CAR, port_No(port));
 430                 port->IER &= ~IER_TXEMPTY;
 431                 rc_out(bp, CD180_IER, port->IER);
 432                 return;
 433         }
 434
 435         if ((port->xmit_cnt <= 0 && !port->break_length)
 436             || tty->stopped || tty->hw_stopped)  {
 437                 rc_out(bp, CD180_CAR, port_No(port));
 438                 port->IER &= ~IER_TXRDY;
 439                 rc_out(bp, CD180_IER, port->IER);
 440                 return;
 441         }
 442
 443         if (port->break_length)  {
 444                 if (port->break_length > 0)  {
 445                         if (port->COR2 & COR2_ETC)  {
 446                                 rc_out(bp, CD180_TDR, CD180_C_ESC);
 447                                 rc_out(bp, CD180_TDR, CD180_C_SBRK);
 448                                 port->COR2 &= ~COR2_ETC;
 449                         }
 450                         count = min_t(int, port->break_length, 0xff);
 451                         rc_out(bp, CD180_TDR, CD180_C_ESC);
 452                         rc_out(bp, CD180_TDR, CD180_C_DELAY);
 453                         rc_out(bp, CD180_TDR, count);
 454                         if (!(port->break_length -= count))
 455                                 port->break_length--;
 456                 } else  {
 457                         rc_out(bp, CD180_TDR, CD180_C_ESC);
 458                         rc_out(bp, CD180_TDR, CD180_C_EBRK);
 459                         rc_out(bp, CD180_COR2, port->COR2);
 460                         rc_wait_CCR(bp);
 461                         rc_out(bp, CD180_CCR, CCR_CORCHG2);
 462                         port->break_length = 0;
 463                 }
 464                 return;
 465         }
 466
 467         count = CD180_NFIFO;
 468         do {
 469                 rc_out(bp, CD180_TDR, port->xmit_buf[port->xmit_tail++]);
 470                 port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
 471                 if (--port->xmit_cnt <= 0)
 472                         break;
 473         } while (--count > 0);
 474
 475         if (port->xmit_cnt <= 0)  {
 476                 rc_out(bp, CD180_CAR, port_No(port));
 477                 port->IER &= ~IER_TXRDY;
 478                 rc_out(bp, CD180_IER, port->IER);
 479         }
 480         if (port->xmit_cnt <= port->wakeup_chars)
 481                 tty_wakeup(tty);
 482 }
 483
 484 static inline void rc_check_modem(struct riscom_board const * bp)
 485 {
 486         struct riscom_port *port;
 487         struct tty_struct *tty;
 488         unsigned char mcr;
 489
 490         if (!(port = rc_get_port(bp, "Modem")))
 491                 return;
 492
 493         tty = port->tty;
 494
 495         mcr = rc_in(bp, CD180_MCR);
 496         if (mcr & MCR_CDCHG)  {
 497                 if (rc_in(bp, CD180_MSVR) & MSVR_CD)
 498                         wake_up_interruptible(&port->open_wait);
 499                 else
 500                         tty_hangup(tty);
 501         }
 502
 503 #ifdef RISCOM_BRAIN_DAMAGED_CTS
 504         if (mcr & MCR_CTSCHG)  {
 505                 if (rc_in(bp, CD180_MSVR) & MSVR_CTS)  {
 506                         tty->hw_stopped = 0;
 507                         port->IER |= IER_TXRDY;
 508                         if (port->xmit_cnt <= port->wakeup_chars)
 509                                 tty_wakeup(tty);
 510                 } else  {
 511                         tty->hw_stopped = 1;
 512                         port->IER &= ~IER_TXRDY;
 513                 }
 514                 rc_out(bp, CD180_IER, port->IER);
 515         }
 516         if (mcr & MCR_DSRCHG)  {
 517                 if (rc_in(bp, CD180_MSVR) & MSVR_DSR)  {
 518                         tty->hw_stopped = 0;
 519                         port->IER |= IER_TXRDY;
 520                         if (port->xmit_cnt <= port->wakeup_chars)
 521                                 tty_wakeup(tty);
 522                 } else  {
 523                         tty->hw_stopped = 1;
 524                         port->IER &= ~IER_TXRDY;
 525                 }
 526                 rc_out(bp, CD180_IER, port->IER);
 527         }
 528 #endif /* RISCOM_BRAIN_DAMAGED_CTS */
 529
 530         /* Clear change bits */
 531         rc_out(bp, CD180_MCR, 0);
 532 }
 533
 534 /* The main interrupt processing routine */
 535 static irqreturn_t rc_interrupt(int dummy, void * dev_id)
 536 {
 537         unsigned char status;
 538         unsigned char ack;
 539         struct riscom_board *bp = dev_id;
 540         unsigned long loop = 0;
 541         int handled = 0;
 542
 543         if (!(bp->flags & RC_BOARD_ACTIVE))
 544                 return IRQ_NONE;
 545
 546         while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) &
 547                                  (RC_BSR_TOUT | RC_BSR_TINT |
 548                                   RC_BSR_MINT | RC_BSR_RINT))) {
 549                 handled = 1;
 550                 if (status & RC_BSR_TOUT)
 551                         printk(KERN_WARNING "rc%d: Got timeout. Hardware "
 552                                             "error?\n", board_No(bp));
 553
 554                 else if (status & RC_BSR_RINT) {
 555                         ack = rc_in(bp, RC_ACK_RINT);
 556
 557                         if (ack == (RC_ID | GIVR_IT_RCV))
 558                                 rc_receive(bp);
 559                         else if (ack == (RC_ID | GIVR_IT_REXC))
 560                                 rc_receive_exc(bp);
 561                         else
 562                                 printk(KERN_WARNING "rc%d: Bad receive ack "
 563                                                     "0x%02x.\n",
 564                                        board_No(bp), ack);
 565
 566                 } else if (status & RC_BSR_TINT) {
 567                         ack = rc_in(bp, RC_ACK_TINT);
 568
 569                         if (ack == (RC_ID | GIVR_IT_TX))
 570                                 rc_transmit(bp);
 571                         else
 572                                 printk(KERN_WARNING "rc%d: Bad transmit ack "
 573                                                     "0x%02x.\n",
 574                                        board_No(bp), ack);
 575
 576                 } else /* if (status & RC_BSR_MINT) */ {
 577                         ack = rc_in(bp, RC_ACK_MINT);
 578
 579                         if (ack == (RC_ID | GIVR_IT_MODEM))
 580                                 rc_check_modem(bp);
 581                         else
 582                                 printk(KERN_WARNING "rc%d: Bad modem ack "
 583                                                     "0x%02x.\n",
 584                                        board_No(bp), ack);
 585
 586                 }
 587
 588                 rc_out(bp, CD180_EOIR, 0);   /* Mark end of interrupt */
 589                 rc_out(bp, RC_CTOUT, 0);     /* Clear timeout flag    */
 590         }
 591         return IRQ_RETVAL(handled);
 592 }
 593
 594 /*
 595  *  Routines for open & close processing.
 596  */
 597
 598 /* Called with disabled interrupts */
 599 static int rc_setup_board(struct riscom_board * bp)
 600 {
 601         int error;
 602
 603         if (bp->flags & RC_BOARD_ACTIVE)
 604                 return 0;
 605
 606         error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
 607                             "RISCom/8", bp);
 608         if (error)
 609                 return error;
 610
 611         rc_out(bp, RC_CTOUT, 0);                /* Just in case         */
 612         bp->DTR = ~0;
 613         rc_out(bp, RC_DTR, bp->DTR);            /* Drop DTR on all ports */
 614
 615         bp->flags |= RC_BOARD_ACTIVE;
 616
 617         return 0;
 618 }
 619
 620 /* Called with disabled interrupts */
 621 static void rc_shutdown_board(struct riscom_board *bp)
 622 {
 623         if (!(bp->flags & RC_BOARD_ACTIVE))
 624                 return;
 625
 626         bp->flags &= ~RC_BOARD_ACTIVE;
 627
 628         free_irq(bp->irq, NULL);
 629
 630         bp->DTR = ~0;
 631         rc_out(bp, RC_DTR, bp->DTR);           /* Drop DTR on all ports */
 632
 633 }
 634
 635 /*
 636  * Setting up port characteristics.
 637  * Must be called with disabled interrupts
 638  */
 639 static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
 640 {
 641         struct tty_struct *tty;
 642         unsigned long baud;
 643         long tmp;
 644         unsigned char cor1 = 0, cor3 = 0;
 645         unsigned char mcor1 = 0, mcor2 = 0;
 646
 647         if (!(tty = port->tty) || !tty->termios)
 648                 return;
 649
 650         port->IER  = 0;
 651         port->COR2 = 0;
 652         port->MSVR = MSVR_RTS;
 653
 654         baud = tty_get_baud_rate(tty);
 655
 656         /* Select port on the board */
 657         rc_out(bp, CD180_CAR, port_No(port));
 658
 659         if (!baud)  {
 660                 /* Drop DTR & exit */
 661                 bp->DTR |= (1u << port_No(port));
 662                 rc_out(bp, RC_DTR, bp->DTR);
 663                 return;
 664         } else  {
 665                 /* Set DTR on */
 666                 bp->DTR &= ~(1u << port_No(port));
 667                 rc_out(bp, RC_DTR, bp->DTR);
 668         }
 669
 670         /*
 671          * Now we must calculate some speed depended things
 672          */
 673
 674         /* Set baud rate for port */
 675         tmp = (((RC_OSCFREQ + baud/2) / baud +
 676                 CD180_TPC/2) / CD180_TPC);
 677
 678         rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
 679         rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
 680         rc_out(bp, CD180_RBPRL, tmp & 0xff);
 681         rc_out(bp, CD180_TBPRL, tmp & 0xff);
 682
 683         baud = (baud + 5) / 10;   /* Estimated CPS */
 684
 685         /* Two timer ticks seems enough to wakeup something like SLIP driver */
 686         tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
 687         port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
 688                                               SERIAL_XMIT_SIZE - 1 : tmp);
 689
 690         /* Receiver timeout will be transmission time for 1.5 chars */
 691         tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud;
 692         tmp = (tmp > 0xff) ? 0xff : tmp;
 693         rc_out(bp, CD180_RTPR, tmp);
 694
 695         switch (C_CSIZE(tty))  {
 696          case CS5:
 697                 cor1 |= COR1_5BITS;
 698                 break;
 699          case CS6:
 700                 cor1 |= COR1_6BITS;
 701                 break;
 702          case CS7:
 703                 cor1 |= COR1_7BITS;
 704                 break;
 705          case CS8:
 706                 cor1 |= COR1_8BITS;
 707                 break;
 708         }
 709
 710         if (C_CSTOPB(tty))
 711                 cor1 |= COR1_2SB;
 712
 713         cor1 |= COR1_IGNORE;
 714         if (C_PARENB(tty))  {
 715                 cor1 |= COR1_NORMPAR;
 716                 if (C_PARODD(tty))
 717                         cor1 |= COR1_ODDP;
 718                 if (I_INPCK(tty))
 719                         cor1 &= ~COR1_IGNORE;
 720         }
 721         /* Set marking of some errors */
 722         port->mark_mask = RCSR_OE | RCSR_TOUT;
 723         if (I_INPCK(tty))
 724                 port->mark_mask |= RCSR_FE | RCSR_PE;
 725         if (I_BRKINT(tty) || I_PARMRK(tty))
 726                 port->mark_mask |= RCSR_BREAK;
 727         if (I_IGNPAR(tty))
 728                 port->mark_mask &= ~(RCSR_FE | RCSR_PE);
 729         if (I_IGNBRK(tty))  {
 730                 port->mark_mask &= ~RCSR_BREAK;
 731                 if (I_IGNPAR(tty))
 732                         /* Real raw mode. Ignore all */
 733                         port->mark_mask &= ~RCSR_OE;
 734         }
 735         /* Enable Hardware Flow Control */
 736         if (C_CRTSCTS(tty))  {
 737 #ifdef RISCOM_BRAIN_DAMAGED_CTS
 738                 port->IER |= IER_DSR | IER_CTS;
 739                 mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
 740                 mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
 741                 tty->hw_stopped = !(rc_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR));
 742 #else
 743                 port->COR2 |= COR2_CTSAE;
 744 #endif
 745         }
 746         /* Enable Software Flow Control. FIXME: I'm not sure about this */
 747         /* Some people reported that it works, but I still doubt */
 748         if (I_IXON(tty))  {
 749                 port->COR2 |= COR2_TXIBE;
 750                 cor3 |= (COR3_FCT | COR3_SCDE);
 751                 if (I_IXANY(tty))
 752                         port->COR2 |= COR2_IXM;
 753                 rc_out(bp, CD180_SCHR1, START_CHAR(tty));
 754                 rc_out(bp, CD180_SCHR2, STOP_CHAR(tty));
 755                 rc_out(bp, CD180_SCHR3, START_CHAR(tty));
 756                 rc_out(bp, CD180_SCHR4, STOP_CHAR(tty));
 757         }
 758         if (!C_CLOCAL(tty))  {
 759                 /* Enable CD check */
 760                 port->IER |= IER_CD;
 761                 mcor1 |= MCOR1_CDZD;
 762                 mcor2 |= MCOR2_CDOD;
 763         }
 764
 765         if (C_CREAD(tty))
 766                 /* Enable receiver */
 767                 port->IER |= IER_RXD;
 768
 769         /* Set input FIFO size (1-8 bytes) */
 770         cor3 |= RISCOM_RXFIFO;
 771         /* Setting up CD180 channel registers */
 772         rc_out(bp, CD180_COR1, cor1);
 773         rc_out(bp, CD180_COR2, port->COR2);
 774         rc_out(bp, CD180_COR3, cor3);
 775         /* Make CD180 know about registers change */
 776         rc_wait_CCR(bp);
 777         rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
 778         /* Setting up modem option registers */
 779         rc_out(bp, CD180_MCOR1, mcor1);
 780         rc_out(bp, CD180_MCOR2, mcor2);
 781         /* Enable CD180 transmitter & receiver */
 782         rc_wait_CCR(bp);
 783         rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN);
 784         /* Enable interrupts */
 785         rc_out(bp, CD180_IER, port->IER);
 786         /* And finally set RTS on */
 787         rc_out(bp, CD180_MSVR, port->MSVR);
 788 }
 789
 790 /* Must be called with interrupts enabled */
 791 static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
 792 {
 793         unsigned long flags;
 794
 795         if (port->flags & ASYNC_INITIALIZED)
 796                 return 0;
 797
 798         if (!port->xmit_buf) {
 799                 /* We may sleep in get_zeroed_page() */
 800                 unsigned long tmp;
 801
 802                 if (!(tmp = get_zeroed_page(GFP_KERNEL)))
 803                         return -ENOMEM;
 804
 805                 if (port->xmit_buf) {
 806                         free_page(tmp);
 807                         return -ERESTARTSYS;
 808                 }
 809                 port->xmit_buf = (unsigned char *) tmp;
 810         }
 811
 812         spin_lock_irqsave(&riscom_lock, flags);
 813
 814         if (port->tty)
 815                 clear_bit(TTY_IO_ERROR, &port->tty->flags);
 816
 817         if (port->count == 1)
 818                 bp->count++;
 819
 820         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
 821         rc_change_speed(bp, port);
 822         port->flags |= ASYNC_INITIALIZED;
 823
 824         spin_unlock_irqrestore(&riscom_lock, flags);
 825         return 0;
 826 }
 827
 828 /* Must be called with interrupts disabled */
 829 static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
 830 {
 831         struct tty_struct *tty;
 832
 833         if (!(port->flags & ASYNC_INITIALIZED))
 834                 return;
 835
 836 #ifdef RC_REPORT_OVERRUN
 837         printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
 838                board_No(bp), port_No(port), port->overrun);
 839 #endif
 840 #ifdef RC_REPORT_FIFO
 841         {
 842                 int i;
 843
 844                 printk(KERN_INFO "rc%d: port %d: FIFO hits [ ",
 845                        board_No(bp), port_No(port));
 846                 for (i = 0; i < 10; i++)  {
 847                         printk("%ld ", port->hits[i]);
 848                 }
 849                 printk("].\n");
 850         }
 851 #endif
 852         if (port->xmit_buf)  {
 853                 free_page((unsigned long) port->xmit_buf);
 854                 port->xmit_buf = NULL;
 855         }
 856
 857         if (!(tty = port->tty) || C_HUPCL(tty))  {
 858                 /* Drop DTR */
 859                 bp->DTR |= (1u << port_No(port));
 860                 rc_out(bp, RC_DTR, bp->DTR);
 861         }
 862
 863         /* Select port */
 864         rc_out(bp, CD180_CAR, port_No(port));
 865         /* Reset port */
 866         rc_wait_CCR(bp);
 867         rc_out(bp, CD180_CCR, CCR_SOFTRESET);
 868         /* Disable all interrupts from this port */
 869         port->IER = 0;
 870         rc_out(bp, CD180_IER, port->IER);
 871
 872         if (tty)
 873                 set_bit(TTY_IO_ERROR, &tty->flags);
 874         port->flags &= ~ASYNC_INITIALIZED;
 875
 876         if (--bp->count < 0)  {
 877                 printk(KERN_INFO "rc%d: rc_shutdown_port: "
 878                                  "bad board count: %d\n",
 879                        board_No(bp), bp->count);
 880                 bp->count = 0;
 881         }
 882
 883         /*
 884          * If this is the last opened port on the board
 885          * shutdown whole board
 886          */
 887         if (!bp->count)
 888                 rc_shutdown_board(bp);
 889 }
 890
 891
 892 static int block_til_ready(struct tty_struct *tty, struct file * filp,
 893                            struct riscom_port *port)
 894 {
 895         DECLARE_WAITQUEUE(wait, current);
 896         struct riscom_board *bp = port_Board(port);
 897         int    retval;
 898         int    do_clocal = 0;
 899         int    CD;
 900         unsigned long flags;
 901
 902         /*
 903          * If the device is in the middle of being closed, then block
 904          * until it's done, and then try again.
 905          */
 906         if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
 907                 interruptible_sleep_on(&port->close_wait);
 908                 if (port->flags & ASYNC_HUP_NOTIFY)
 909                         return -EAGAIN;
 910                 else
 911                         return -ERESTARTSYS;
 912         }
 913
 914         /*
 915          * If non-blocking mode is set, or the port is not enabled,
 916          * then make the check up front and then exit.
 917          */
 918         if ((filp->f_flags & O_NONBLOCK) ||
 919             (tty->flags & (1 << TTY_IO_ERROR))) {
 920                 port->flags |= ASYNC_NORMAL_ACTIVE;
 921                 return 0;
 922         }
 923
 924         if (C_CLOCAL(tty))
 925                 do_clocal = 1;
 926
 927         /*
 928          * Block waiting for the carrier detect and the line to become
 929          * free (i.e., not in use by the callout).  While we are in
 930          * this loop, info->count is dropped by one, so that
 931          * rs_close() knows when to free things.  We restore it upon
 932          * exit, either normal or abnormal.
 933          */
 934         retval = 0;
 935         add_wait_queue(&port->open_wait, &wait);
 936
 937         spin_lock_irqsave(&riscom_lock, flags);
 938
 939         if (!tty_hung_up_p(filp))
 940                 port->count--;
 941
 942         spin_unlock_irqrestore(&riscom_lock, flags);
 943
 944         port->blocked_open++;
 945         while (1) {
 946                 spin_lock_irqsave(&riscom_lock, flags);
 947
 948                 rc_out(bp, CD180_CAR, port_No(port));
 949                 CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
 950                 rc_out(bp, CD180_MSVR, MSVR_RTS);
 951                 bp->DTR &= ~(1u << port_No(port));
 952                 rc_out(bp, RC_DTR, bp->DTR);
 953
 954                 spin_unlock_irqrestore(&riscom_lock, flags);
 955
 956                 set_current_state(TASK_INTERRUPTIBLE);
 957                 if (tty_hung_up_p(filp) ||
 958                     !(port->flags & ASYNC_INITIALIZED)) {
 959                         if (port->flags & ASYNC_HUP_NOTIFY)
 960                                 retval = -EAGAIN;
 961                         else
 962                                 retval = -ERESTARTSYS;
 963                         break;
 964                 }
 965                 if (!(port->flags & ASYNC_CLOSING) &&
 966                     (do_clocal || CD))
 967                         break;
 968                 if (signal_pending(current)) {
 969                         retval = -ERESTARTSYS;
 970                         break;
 971                 }
 972                 schedule();
 973         }
 974         __set_current_state(TASK_RUNNING);
 975         remove_wait_queue(&port->open_wait, &wait);
 976         if (!tty_hung_up_p(filp))
 977                 port->count++;
 978         port->blocked_open--;
 979         if (retval)
 980                 return retval;
 981
 982         port->flags |= ASYNC_NORMAL_ACTIVE;
 983         return 0;
 984 }
 985
 986 static int rc_open(struct tty_struct * tty, struct file * filp)
 987 {
 988         int board;
 989         int error;
 990         struct riscom_port * port;
 991         struct riscom_board * bp;
 992
 993         board = RC_BOARD(tty->index);
 994         if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT))
 995                 return -ENODEV;
 996
 997         bp = &rc_board[board];
 998         port = rc_port + board * RC_NPORT + RC_PORT(tty->index);
 999         if (rc_paranoia_check(port, tty->name, "rc_open"))
1000                 return -ENODEV;
1001
1002         if ((error = rc_setup_board(bp)))
1003                 return error;
1004
1005         port->count++;
1006         tty->driver_data = port;
1007         port->tty = tty;
1008
1009         if ((error = rc_setup_port(bp, port)))
1010                 return error;
1011
1012         if ((error = block_til_ready(tty, filp, port)))
1013                 return error;
1014
1015         return 0;
1016 }
1017
1018 static void rc_close(struct tty_struct * tty, struct file * filp)
1019 {
1020         struct riscom_port *port = (struct riscom_port *) tty->driver_data;
1021         struct riscom_board *bp;
1022         unsigned long flags;
1023         unsigned long timeout;
1024
1025         if (!port || rc_paranoia_check(port, tty->name, "close"))
1026                 return;
1027
1028         spin_lock_irqsave(&riscom_lock, flags);
1029
1030         if (tty_hung_up_p(filp))
1031                 goto out;
1032
1033         bp = port_Board(port);
1034         if ((tty->count == 1) && (port->count != 1))  {
1035                 printk(KERN_INFO "rc%d: rc_close: bad port count;"
1036                        " tty->count is 1, port count is %d\n",
1037                        board_No(bp), port->count);
1038                 port->count = 1;
1039         }
1040         if (--port->count < 0)  {
1041                 printk(KERN_INFO "rc%d: rc_close: bad port count "
1042                                  "for tty%d: %d\n",
1043                        board_No(bp), port_No(port), port->count);
1044                 port->count = 0;
1045         }
1046         if (port->count)
1047                 goto out;
1048         port->flags |= ASYNC_CLOSING;
1049         /*
1050          * Now we wait for the transmit buffer to clear; and we notify
1051          * the line discipline to only process XON/XOFF characters.
1052          */
1053         tty->closing = 1;
1054         if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1055                 tty_wait_until_sent(tty, port->closing_wait);
1056         /*
1057          * At this point we stop accepting input.  To do this, we
1058          * disable the receive line status interrupts, and tell the
1059          * interrupt driver to stop checking the data ready bit in the
1060          * line status register.
1061          */
1062         port->IER &= ~IER_RXD;
1063         if (port->flags & ASYNC_INITIALIZED) {
1064                 port->IER &= ~IER_TXRDY;
1065                 port->IER |= IER_TXEMPTY;
1066                 rc_out(bp, CD180_CAR, port_No(port));
1067                 rc_out(bp, CD180_IER, port->IER);
1068                 /*
1069                  * Before we drop DTR, make sure the UART transmitter
1070                  * has completely drained; this is especially
1071                  * important if there is a transmit FIFO!
1072                  */
1073                 timeout = jiffies+HZ;
1074                 while(port->IER & IER_TXEMPTY)  {
1075                         msleep_interruptible(jiffies_to_msecs(port->timeout));
1076                         if (time_after(jiffies, timeout))
1077                                 break;
1078                 }
1079         }
1080         rc_shutdown_port(bp, port);
1081         if (tty->driver->flush_buffer)
1082                 tty->driver->flush_buffer(tty);
1083         tty_ldisc_flush(tty);
1084
1085         tty->closing = 0;
1086         port->tty = NULL;
1087         if (port->blocked_open) {
1088                 if (port->close_delay) {
1089                         msleep_interruptible(jiffies_to_msecs(port->close_delay));
1090                 }
1091                 wake_up_interruptible(&port->open_wait);
1092         }
1093         port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1094         wake_up_interruptible(&port->close_wait);
1095
1096 out:
1097         spin_unlock_irqrestore(&riscom_lock, flags);
1098 }
1099
1100 static int rc_write(struct tty_struct * tty,
1101                     const unsigned char *buf, int count)
1102 {
1103         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1104         struct riscom_board *bp;
1105         int c, total = 0;
1106         unsigned long flags;
1107
1108         if (rc_paranoia_check(port, tty->name, "rc_write"))
1109                 return 0;
1110
1111         bp = port_Board(port);
1112
1113         if (!tty || !port->xmit_buf)
1114                 return 0;
1115
1116         while (1) {
1117                 spin_lock_irqsave(&riscom_lock, flags);
1118
1119                 c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
1120                                           SERIAL_XMIT_SIZE - port->xmit_head));
1121                 if (c <= 0)
1122                         break;  /* lock continues to be held */
1123
1124                 memcpy(port->xmit_buf + port->xmit_head, buf, c);
1125                 port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
1126                 port->xmit_cnt += c;
1127
1128                 spin_unlock_irqrestore(&riscom_lock, flags);
1129
1130                 buf += c;
1131                 count -= c;
1132                 total += c;
1133         }
1134
1135         if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
1136             !(port->IER & IER_TXRDY)) {
1137                 port->IER |= IER_TXRDY;
1138                 rc_out(bp, CD180_CAR, port_No(port));
1139                 rc_out(bp, CD180_IER, port->IER);
1140         }
1141
1142         spin_unlock_irqrestore(&riscom_lock, flags);
1143
1144         return total;
1145 }
1146
1147 static void rc_put_char(struct tty_struct * tty, unsigned char ch)
1148 {
1149         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1150         unsigned long flags;
1151
1152         if (rc_paranoia_check(port, tty->name, "rc_put_char"))
1153                 return;
1154
1155         if (!tty || !port->xmit_buf)
1156                 return;
1157
1158         spin_lock_irqsave(&riscom_lock, flags);
1159
1160         if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
1161                 goto out;
1162
1163         port->xmit_buf[port->xmit_head++] = ch;
1164         port->xmit_head &= SERIAL_XMIT_SIZE - 1;
1165         port->xmit_cnt++;
1166
1167 out:
1168         spin_unlock_irqrestore(&riscom_lock, flags);
1169 }
1170
1171 static void rc_flush_chars(struct tty_struct * tty)
1172 {
1173         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1174         unsigned long flags;
1175
1176         if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
1177                 return;
1178
1179         if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1180             !port->xmit_buf)
1181                 return;
1182
1183         spin_lock_irqsave(&riscom_lock, flags);
1184
1185         port->IER |= IER_TXRDY;
1186         rc_out(port_Board(port), CD180_CAR, port_No(port));
1187         rc_out(port_Board(port), CD180_IER, port->IER);
1188
1189         spin_unlock_irqrestore(&riscom_lock, flags);
1190 }
1191
1192 static int rc_write_room(struct tty_struct * tty)
1193 {
1194         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1195         int     ret;
1196
1197         if (rc_paranoia_check(port, tty->name, "rc_write_room"))
1198                 return 0;
1199
1200         ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1201         if (ret < 0)
1202                 ret = 0;
1203         return ret;
1204 }
1205
1206 static int rc_chars_in_buffer(struct tty_struct *tty)
1207 {
1208         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1209
1210         if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer"))
1211                 return 0;
1212
1213         return port->xmit_cnt;
1214 }
1215
1216 static void rc_flush_buffer(struct tty_struct *tty)
1217 {
1218         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1219         unsigned long flags;
1220
1221         if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
1222                 return;
1223
1224         spin_lock_irqsave(&riscom_lock, flags);
1225
1226         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
1227
1228         spin_unlock_irqrestore(&riscom_lock, flags);
1229
1230         tty_wakeup(tty);
1231 }
1232
1233 static int rc_tiocmget(struct tty_struct *tty, struct file *file)
1234 {
1235         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1236         struct riscom_board * bp;
1237         unsigned char status;
1238         unsigned int result;
1239         unsigned long flags;
1240
1241         if (rc_paranoia_check(port, tty->name, __FUNCTION__))
1242                 return -ENODEV;
1243
1244         bp = port_Board(port);
1245
1246         spin_lock_irqsave(&riscom_lock, flags);
1247
1248         rc_out(bp, CD180_CAR, port_No(port));
1249         status = rc_in(bp, CD180_MSVR);
1250         result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG;
1251
1252         spin_unlock_irqrestore(&riscom_lock, flags);
1253
1254         result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0)
1255                 | ((status & MSVR_DTR) ? TIOCM_DTR : 0)
1256                 | ((status & MSVR_CD)  ? TIOCM_CAR : 0)
1257                 | ((status & MSVR_DSR) ? TIOCM_DSR : 0)
1258                 | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
1259         return result;
1260 }
1261
1262 static int rc_tiocmset(struct tty_struct *tty, struct file *file,
1263                        unsigned int set, unsigned int clear)
1264 {
1265         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1266         unsigned long flags;
1267         struct riscom_board *bp;
1268
1269         if (rc_paranoia_check(port, tty->name, __FUNCTION__))
1270                 return -ENODEV;
1271
1272         bp = port_Board(port);
1273
1274         spin_lock_irqsave(&riscom_lock, flags);
1275
1276         if (set & TIOCM_RTS)
1277                 port->MSVR |= MSVR_RTS;
1278         if (set & TIOCM_DTR)
1279                 bp->DTR &= ~(1u << port_No(port));
1280
1281         if (clear & TIOCM_RTS)
1282                 port->MSVR &= ~MSVR_RTS;
1283         if (clear & TIOCM_DTR)
1284                 bp->DTR |= (1u << port_No(port));
1285
1286         rc_out(bp, CD180_CAR, port_No(port));
1287         rc_out(bp, CD180_MSVR, port->MSVR);
1288         rc_out(bp, RC_DTR, bp->DTR);
1289
1290         spin_unlock_irqrestore(&riscom_lock, flags);
1291
1292         return 0;
1293 }
1294
1295 static inline void rc_send_break(struct riscom_port * port, unsigned long length)
1296 {
1297         struct riscom_board *bp = port_Board(port);
1298         unsigned long flags;
1299
1300         spin_lock_irqsave(&riscom_lock, flags);
1301
1302         port->break_length = RISCOM_TPS / HZ * length;
1303         port->COR2 |= COR2_ETC;
1304         port->IER  |= IER_TXRDY;
1305         rc_out(bp, CD180_CAR, port_No(port));
1306         rc_out(bp, CD180_COR2, port->COR2);
1307         rc_out(bp, CD180_IER, port->IER);
1308         rc_wait_CCR(bp);
1309         rc_out(bp, CD180_CCR, CCR_CORCHG2);
1310         rc_wait_CCR(bp);
1311
1312         spin_unlock_irqrestore(&riscom_lock, flags);
1313 }
1314
1315 static inline int rc_set_serial_info(struct riscom_port * port,
1316                                      struct serial_struct __user * newinfo)
1317 {
1318         struct serial_struct tmp;
1319         struct riscom_board *bp = port_Board(port);
1320         int change_speed;
1321
1322         if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
1323                 return -EFAULT;
1324
1325 #if 0
1326         if ((tmp.irq != bp->irq) ||
1327             (tmp.port != bp->base) ||
1328             (tmp.type != PORT_CIRRUS) ||
1329             (tmp.baud_base != (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC) ||
1330             (tmp.custom_divisor != 0) ||
1331             (tmp.xmit_fifo_size != CD180_NFIFO) ||
1332             (tmp.flags & ~RISCOM_LEGAL_FLAGS))
1333                 return -EINVAL;
1334 #endif
1335
1336         change_speed = ((port->flags & ASYNC_SPD_MASK) !=
1337                         (tmp.flags & ASYNC_SPD_MASK));
1338
1339         if (!capable(CAP_SYS_ADMIN)) {
1340                 if ((tmp.close_delay != port->close_delay) ||
1341                     (tmp.closing_wait != port->closing_wait) ||
1342                     ((tmp.flags & ~ASYNC_USR_MASK) !=
1343                      (port->flags & ~ASYNC_USR_MASK)))
1344                         return -EPERM;
1345                 port->flags = ((port->flags & ~ASYNC_USR_MASK) |
1346                                (tmp.flags & ASYNC_USR_MASK));
1347         } else  {
1348                 port->flags = ((port->flags & ~ASYNC_FLAGS) |
1349                                (tmp.flags & ASYNC_FLAGS));
1350                 port->close_delay = tmp.close_delay;
1351                 port->closing_wait = tmp.closing_wait;
1352         }
1353         if (change_speed)  {
1354                 unsigned long flags;
1355
1356                 spin_lock_irqsave(&riscom_lock, flags);
1357                 rc_change_speed(bp, port);
1358                 spin_unlock_irqrestore(&riscom_lock, flags);
1359         }
1360         return 0;
1361 }
1362
1363 static inline int rc_get_serial_info(struct riscom_port * port,
1364                                      struct serial_struct __user *retinfo)
1365 {
1366         struct serial_struct tmp;
1367         struct riscom_board *bp = port_Board(port);
1368
1369         memset(&tmp, 0, sizeof(tmp));
1370         tmp.type = PORT_CIRRUS;
1371         tmp.line = port - rc_port;
1372         tmp.port = bp->base;
1373         tmp.irq  = bp->irq;
1374         tmp.flags = port->flags;
1375         tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
1376         tmp.close_delay = port->close_delay * HZ/100;
1377         tmp.closing_wait = port->closing_wait * HZ/100;
1378         tmp.xmit_fifo_size = CD180_NFIFO;
1379         return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
1380 }
1381
1382 static int rc_ioctl(struct tty_struct * tty, struct file * filp,
1383                     unsigned int cmd, unsigned long arg)
1384
1385 {
1386         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1387         void __user *argp = (void __user *)arg;
1388         int retval;
1389
1390         if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
1391                 return -ENODEV;
1392
1393         switch (cmd) {
1394          case TCSBRK:   /* SVID version: non-zero arg --> no break */
1395                 retval = tty_check_change(tty);
1396                 if (retval)
1397                         return retval;
1398                 tty_wait_until_sent(tty, 0);
1399                 if (!arg)
1400                         rc_send_break(port, HZ/4);      /* 1/4 second */
1401                 break;
1402          case TCSBRKP:  /* support for POSIX tcsendbreak() */
1403                 retval = tty_check_change(tty);
1404                 if (retval)
1405                         return retval;
1406                 tty_wait_until_sent(tty, 0);
1407                 rc_send_break(port, arg ? arg*(HZ/10) : HZ/4);
1408                 break;
1409          case TIOCGSOFTCAR:
1410                 return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned __user *)argp);
1411          case TIOCSSOFTCAR:
1412                 if (get_user(arg,(unsigned __user *) argp))
1413                         return -EFAULT;
1414                 tty->termios->c_cflag =
1415                         ((tty->termios->c_cflag & ~CLOCAL) |
1416                         (arg ? CLOCAL : 0));
1417                 break;
1418          case TIOCGSERIAL:
1419                 return rc_get_serial_info(port, argp);
1420          case TIOCSSERIAL:
1421                 return rc_set_serial_info(port, argp);
1422          default:
1423                 return -ENOIOCTLCMD;
1424         }
1425         return 0;
1426 }
1427
1428 static void rc_throttle(struct tty_struct * tty)
1429 {
1430         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1431         struct riscom_board *bp;
1432         unsigned long flags;
1433
1434         if (rc_paranoia_check(port, tty->name, "rc_throttle"))
1435                 return;
1436
1437         bp = port_Board(port);
1438
1439         spin_lock_irqsave(&riscom_lock, flags);
1440
1441         port->MSVR &= ~MSVR_RTS;
1442         rc_out(bp, CD180_CAR, port_No(port));
1443         if (I_IXOFF(tty)) {
1444                 rc_wait_CCR(bp);
1445                 rc_out(bp, CD180_CCR, CCR_SSCH2);
1446                 rc_wait_CCR(bp);
1447         }
1448         rc_out(bp, CD180_MSVR, port->MSVR);
1449
1450         spin_unlock_irqrestore(&riscom_lock, flags);
1451 }
1452
1453 static void rc_unthrottle(struct tty_struct * tty)
1454 {
1455         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1456         struct riscom_board *bp;
1457         unsigned long flags;
1458
1459         if (rc_paranoia_check(port, tty->name, "rc_unthrottle"))
1460                 return;
1461
1462         bp = port_Board(port);
1463
1464         spin_lock_irqsave(&riscom_lock, flags);
1465
1466         port->MSVR |= MSVR_RTS;
1467         rc_out(bp, CD180_CAR, port_No(port));
1468         if (I_IXOFF(tty))  {
1469                 rc_wait_CCR(bp);
1470                 rc_out(bp, CD180_CCR, CCR_SSCH1);
1471                 rc_wait_CCR(bp);
1472         }
1473         rc_out(bp, CD180_MSVR, port->MSVR);
1474
1475         spin_unlock_irqrestore(&riscom_lock, flags);
1476 }
1477
1478 static void rc_stop(struct tty_struct * tty)
1479 {
1480         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1481         struct riscom_board *bp;
1482         unsigned long flags;
1483
1484         if (rc_paranoia_check(port, tty->name, "rc_stop"))
1485                 return;
1486
1487         bp = port_Board(port);
1488
1489         spin_lock_irqsave(&riscom_lock, flags);
1490
1491         port->IER &= ~IER_TXRDY;
1492         rc_out(bp, CD180_CAR, port_No(port));
1493         rc_out(bp, CD180_IER, port->IER);
1494
1495         spin_unlock_irqrestore(&riscom_lock, flags);
1496 }
1497
1498 static void rc_start(struct tty_struct * tty)
1499 {
1500         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1501         struct riscom_board *bp;
1502         unsigned long flags;
1503
1504         if (rc_paranoia_check(port, tty->name, "rc_start"))
1505                 return;
1506
1507         bp = port_Board(port);
1508
1509         spin_lock_irqsave(&riscom_lock, flags);
1510
1511         if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY))  {
1512                 port->IER |= IER_TXRDY;
1513                 rc_out(bp, CD180_CAR, port_No(port));
1514                 rc_out(bp, CD180_IER, port->IER);
1515         }
1516
1517         spin_unlock_irqrestore(&riscom_lock, flags);
1518 }
1519
1520 static void rc_hangup(struct tty_struct * tty)
1521 {
1522         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1523         struct riscom_board *bp;
1524
1525         if (rc_paranoia_check(port, tty->name, "rc_hangup"))
1526                 return;
1527
1528         bp = port_Board(port);
1529
1530         rc_shutdown_port(bp, port);
1531         port->count = 0;
1532         port->flags &= ~ASYNC_NORMAL_ACTIVE;
1533         port->tty = NULL;
1534         wake_up_interruptible(&port->open_wait);
1535 }
1536
1537 static void rc_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
1538 {
1539         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1540         unsigned long flags;
1541
1542         if (rc_paranoia_check(port, tty->name, "rc_set_termios"))
1543                 return;
1544
1545         if (tty->termios->c_cflag == old_termios->c_cflag &&
1546             tty->termios->c_iflag == old_termios->c_iflag)
1547                 return;
1548
1549         spin_lock_irqsave(&riscom_lock, flags);
1550         rc_change_speed(port_Board(port), port);
1551         spin_unlock_irqrestore(&riscom_lock, flags);
1552
1553         if ((old_termios->c_cflag & CRTSCTS) &&
1554             !(tty->termios->c_cflag & CRTSCTS)) {
1555                 tty->hw_stopped = 0;
1556                 rc_start(tty);
1557         }
1558 }
1559
1560 static const struct tty_operations riscom_ops = {
1561         .open  = rc_open,
1562         .close = rc_close,
1563         .write = rc_write,
1564         .put_char = rc_put_char,
1565         .flush_chars = rc_flush_chars,
1566         .write_room = rc_write_room,
1567         .chars_in_buffer = rc_chars_in_buffer,
1568         .flush_buffer = rc_flush_buffer,
1569         .ioctl = rc_ioctl,
1570         .throttle = rc_throttle,
1571         .unthrottle = rc_unthrottle,
1572         .set_termios = rc_set_termios,
1573         .stop = rc_stop,
1574         .start = rc_start,
1575         .hangup = rc_hangup,
1576         .tiocmget = rc_tiocmget,
1577         .tiocmset = rc_tiocmset,
1578 };
1579
1580 static int __init rc_init_drivers(void)
1581 {
1582         int error;
1583         int i;
1584
1585         riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT);
1586         if (!riscom_driver)
1587                 return -ENOMEM;
1588
1589         riscom_driver->owner = THIS_MODULE;
1590         riscom_driver->name = "ttyL";
1591         riscom_driver->major = RISCOM8_NORMAL_MAJOR;
1592         riscom_driver->type = TTY_DRIVER_TYPE_SERIAL;
1593         riscom_driver->subtype = SERIAL_TYPE_NORMAL;
1594         riscom_driver->init_termios = tty_std_termios;
1595         riscom_driver->init_termios.c_cflag =
1596                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1597         riscom_driver->init_termios.c_ispeed = 9600;
1598         riscom_driver->init_termios.c_ospeed = 9600;
1599         riscom_driver->flags = TTY_DRIVER_REAL_RAW;
1600         tty_set_operations(riscom_driver, &riscom_ops);
1601         if ((error = tty_register_driver(riscom_driver)))  {
1602                 put_tty_driver(riscom_driver);
1603                 printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, "
1604                                 "error = %d\n",
1605                        error);
1606                 return 1;
1607         }
1608
1609         memset(rc_port, 0, sizeof(rc_port));
1610         for (i = 0; i < RC_NPORT * RC_NBOARD; i++)  {
1611                 rc_port[i].magic = RISCOM8_MAGIC;
1612                 rc_port[i].close_delay = 50 * HZ/100;
1613                 rc_port[i].closing_wait = 3000 * HZ/100;
1614                 init_waitqueue_head(&rc_port[i].open_wait);
1615                 init_waitqueue_head(&rc_port[i].close_wait);
1616         }
1617
1618         return 0;
1619 }
1620
1621 static void rc_release_drivers(void)
1622 {
1623         tty_unregister_driver(riscom_driver);
1624         put_tty_driver(riscom_driver);
1625 }
1626
1627 #ifndef MODULE
1628 /*
1629  * Called at boot time.
1630  *
1631  * You can specify IO base for up to RC_NBOARD cards,
1632  * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt.
1633  * Note that there will be no probing at default
1634  * addresses in this case.
1635  *
1636  */
1637 static int __init riscom8_setup(char *str)
1638 {
1639         int ints[RC_NBOARD];
1640         int i;
1641
1642         str = get_options(str, ARRAY_SIZE(ints), ints);
1643
1644         for (i = 0; i < RC_NBOARD; i++) {
1645                 if (i < ints[0])
1646                         rc_board[i].base = ints[i+1];
1647                 else
1648                         rc_board[i].base = 0;
1649         }
1650         return 1;
1651 }
1652
1653 __setup("riscom8=", riscom8_setup);
1654 #endif
1655
1656 static char banner[] __initdata =
1657         KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin "
1658                   "1994-1996.\n";
1659 static char no_boards_msg[] __initdata =
1660         KERN_INFO "rc: No RISCom/8 boards detected.\n";
1661
1662 /*
1663  * This routine must be called by kernel at boot time
1664  */
1665 static int __init riscom8_init(void)
1666 {
1667         int i;
1668         int found = 0;
1669
1670         printk(banner);
1671
1672         if (rc_init_drivers())
1673                 return -EIO;
1674
1675         for (i = 0; i < RC_NBOARD; i++)
1676                 if (rc_board[i].base && !rc_probe(&rc_board[i]))
1677                         found++;
1678
1679         if (!found)  {
1680                 rc_release_drivers();
1681                 printk(no_boards_msg);
1682                 return -EIO;
1683         }
1684         return 0;
1685 }
1686
1687 #ifdef MODULE
1688 static int iobase;
1689 static int iobase1;
1690 static int iobase2;
1691 static int iobase3;
1692 module_param(iobase, int, 0);
1693 module_param(iobase1, int, 0);
1694 module_param(iobase2, int, 0);
1695 module_param(iobase3, int, 0);
1696
1697 MODULE_LICENSE("GPL");
1698 #endif /* MODULE */
1699
1700 /*
1701  * You can setup up to 4 boards (current value of RC_NBOARD)
1702  * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter.
1703  *
1704  */
1705 static int __init riscom8_init_module (void)
1706 {
1707 #ifdef MODULE
1708         int i;
1709
1710         if (iobase || iobase1 || iobase2 || iobase3) {
1711                 for(i = 0; i < RC_NBOARD; i++)
1712                         rc_board[i].base = 0;
1713         }
1714
1715         if (iobase)
1716                 rc_board[0].base = iobase;
1717         if (iobase1)
1718                 rc_board[1].base = iobase1;
1719         if (iobase2)
1720                 rc_board[2].base = iobase2;
1721         if (iobase3)
1722                 rc_board[3].base = iobase3;
1723 #endif /* MODULE */
1724
1725         return riscom8_init();
1726 }
1727
1728 static void __exit riscom8_exit_module (void)
1729 {
1730         int i;
1731
1732         rc_release_drivers();
1733         for (i = 0; i < RC_NBOARD; i++)
1734                 if (rc_board[i].flags & RC_BOARD_PRESENT)
1735                         rc_release_io_range(&rc_board[i]);
1736
1737 }
1738
1739 module_init(riscom8_init_module);
1740 module_exit(riscom8_exit_module);
1741