sfc: Work around unreliable strap pins
[linux-2.6] / drivers / net / sfc / net_driver.h
1 /****************************************************************************
2  * Driver for Solarflare Solarstorm network controllers and boards
3  * Copyright 2005-2006 Fen Systems Ltd.
4  * Copyright 2005-2008 Solarflare Communications Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License version 2 as published
8  * by the Free Software Foundation, incorporated herein by reference.
9  */
10
11 /* Common definitions for all Efx net driver code */
12
13 #ifndef EFX_NET_DRIVER_H
14 #define EFX_NET_DRIVER_H
15
16 #include <linux/version.h>
17 #include <linux/netdevice.h>
18 #include <linux/etherdevice.h>
19 #include <linux/ethtool.h>
20 #include <linux/if_vlan.h>
21 #include <linux/timer.h>
22 #include <linux/mii.h>
23 #include <linux/list.h>
24 #include <linux/pci.h>
25 #include <linux/device.h>
26 #include <linux/highmem.h>
27 #include <linux/workqueue.h>
28 #include <linux/inet_lro.h>
29 #include <linux/i2c.h>
30
31 #include "enum.h"
32 #include "bitfield.h"
33
34 #define EFX_MAX_LRO_DESCRIPTORS 8
35 #define EFX_MAX_LRO_AGGR MAX_SKB_FRAGS
36
37 /**************************************************************************
38  *
39  * Build definitions
40  *
41  **************************************************************************/
42 #ifndef EFX_DRIVER_NAME
43 #define EFX_DRIVER_NAME "sfc"
44 #endif
45 #define EFX_DRIVER_VERSION      "2.2"
46
47 #ifdef EFX_ENABLE_DEBUG
48 #define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
49 #define EFX_WARN_ON_PARANOID(x) WARN_ON(x)
50 #else
51 #define EFX_BUG_ON_PARANOID(x) do {} while (0)
52 #define EFX_WARN_ON_PARANOID(x) do {} while (0)
53 #endif
54
55 /* Un-rate-limited logging */
56 #define EFX_ERR(efx, fmt, args...) \
57 dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args)
58
59 #define EFX_INFO(efx, fmt, args...) \
60 dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args)
61
62 #ifdef EFX_ENABLE_DEBUG
63 #define EFX_LOG(efx, fmt, args...) \
64 dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
65 #else
66 #define EFX_LOG(efx, fmt, args...) \
67 dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
68 #endif
69
70 #define EFX_TRACE(efx, fmt, args...) do {} while (0)
71
72 #define EFX_REGDUMP(efx, fmt, args...) do {} while (0)
73
74 /* Rate-limited logging */
75 #define EFX_ERR_RL(efx, fmt, args...) \
76 do {if (net_ratelimit()) EFX_ERR(efx, fmt, ##args); } while (0)
77
78 #define EFX_INFO_RL(efx, fmt, args...) \
79 do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0)
80
81 #define EFX_LOG_RL(efx, fmt, args...) \
82 do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
83
84 /**************************************************************************
85  *
86  * Efx data structures
87  *
88  **************************************************************************/
89
90 #define EFX_MAX_CHANNELS 32
91 #define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS
92
93 #define EFX_TX_QUEUE_OFFLOAD_CSUM       0
94 #define EFX_TX_QUEUE_NO_CSUM            1
95 #define EFX_TX_QUEUE_COUNT              2
96
97 /**
98  * struct efx_special_buffer - An Efx special buffer
99  * @addr: CPU base address of the buffer
100  * @dma_addr: DMA base address of the buffer
101  * @len: Buffer length, in bytes
102  * @index: Buffer index within controller;s buffer table
103  * @entries: Number of buffer table entries
104  *
105  * Special buffers are used for the event queues and the TX and RX
106  * descriptor queues for each channel.  They are *not* used for the
107  * actual transmit and receive buffers.
108  *
109  * Note that for Falcon, TX and RX descriptor queues live in host memory.
110  * Allocation and freeing procedures must take this into account.
111  */
112 struct efx_special_buffer {
113         void *addr;
114         dma_addr_t dma_addr;
115         unsigned int len;
116         int index;
117         int entries;
118 };
119
120 /**
121  * struct efx_tx_buffer - An Efx TX buffer
122  * @skb: The associated socket buffer.
123  *      Set only on the final fragment of a packet; %NULL for all other
124  *      fragments.  When this fragment completes, then we can free this
125  *      skb.
126  * @tsoh: The associated TSO header structure, or %NULL if this
127  *      buffer is not a TSO header.
128  * @dma_addr: DMA address of the fragment.
129  * @len: Length of this fragment.
130  *      This field is zero when the queue slot is empty.
131  * @continuation: True if this fragment is not the end of a packet.
132  * @unmap_single: True if pci_unmap_single should be used.
133  * @unmap_len: Length of this fragment to unmap
134  */
135 struct efx_tx_buffer {
136         const struct sk_buff *skb;
137         struct efx_tso_header *tsoh;
138         dma_addr_t dma_addr;
139         unsigned short len;
140         bool continuation;
141         bool unmap_single;
142         unsigned short unmap_len;
143 };
144
145 /**
146  * struct efx_tx_queue - An Efx TX queue
147  *
148  * This is a ring buffer of TX fragments.
149  * Since the TX completion path always executes on the same
150  * CPU and the xmit path can operate on different CPUs,
151  * performance is increased by ensuring that the completion
152  * path and the xmit path operate on different cache lines.
153  * This is particularly important if the xmit path is always
154  * executing on one CPU which is different from the completion
155  * path.  There is also a cache line for members which are
156  * read but not written on the fast path.
157  *
158  * @efx: The associated Efx NIC
159  * @queue: DMA queue number
160  * @channel: The associated channel
161  * @buffer: The software buffer ring
162  * @txd: The hardware descriptor ring
163  * @flushed: Used when handling queue flushing
164  * @read_count: Current read pointer.
165  *      This is the number of buffers that have been removed from both rings.
166  * @stopped: Stopped count.
167  *      Set if this TX queue is currently stopping its port.
168  * @insert_count: Current insert pointer
169  *      This is the number of buffers that have been added to the
170  *      software ring.
171  * @write_count: Current write pointer
172  *      This is the number of buffers that have been added to the
173  *      hardware ring.
174  * @old_read_count: The value of read_count when last checked.
175  *      This is here for performance reasons.  The xmit path will
176  *      only get the up-to-date value of read_count if this
177  *      variable indicates that the queue is full.  This is to
178  *      avoid cache-line ping-pong between the xmit path and the
179  *      completion path.
180  * @tso_headers_free: A list of TSO headers allocated for this TX queue
181  *      that are not in use, and so available for new TSO sends. The list
182  *      is protected by the TX queue lock.
183  * @tso_bursts: Number of times TSO xmit invoked by kernel
184  * @tso_long_headers: Number of packets with headers too long for standard
185  *      blocks
186  * @tso_packets: Number of packets via the TSO xmit path
187  */
188 struct efx_tx_queue {
189         /* Members which don't change on the fast path */
190         struct efx_nic *efx ____cacheline_aligned_in_smp;
191         int queue;
192         struct efx_channel *channel;
193         struct efx_nic *nic;
194         struct efx_tx_buffer *buffer;
195         struct efx_special_buffer txd;
196         bool flushed;
197
198         /* Members used mainly on the completion path */
199         unsigned int read_count ____cacheline_aligned_in_smp;
200         int stopped;
201
202         /* Members used only on the xmit path */
203         unsigned int insert_count ____cacheline_aligned_in_smp;
204         unsigned int write_count;
205         unsigned int old_read_count;
206         struct efx_tso_header *tso_headers_free;
207         unsigned int tso_bursts;
208         unsigned int tso_long_headers;
209         unsigned int tso_packets;
210 };
211
212 /**
213  * struct efx_rx_buffer - An Efx RX data buffer
214  * @dma_addr: DMA base address of the buffer
215  * @skb: The associated socket buffer, if any.
216  *      If both this and page are %NULL, the buffer slot is currently free.
217  * @page: The associated page buffer, if any.
218  *      If both this and skb are %NULL, the buffer slot is currently free.
219  * @data: Pointer to ethernet header
220  * @len: Buffer length, in bytes.
221  * @unmap_addr: DMA address to unmap
222  */
223 struct efx_rx_buffer {
224         dma_addr_t dma_addr;
225         struct sk_buff *skb;
226         struct page *page;
227         char *data;
228         unsigned int len;
229         dma_addr_t unmap_addr;
230 };
231
232 /**
233  * struct efx_rx_queue - An Efx RX queue
234  * @efx: The associated Efx NIC
235  * @queue: DMA queue number
236  * @channel: The associated channel
237  * @buffer: The software buffer ring
238  * @rxd: The hardware descriptor ring
239  * @added_count: Number of buffers added to the receive queue.
240  * @notified_count: Number of buffers given to NIC (<= @added_count).
241  * @removed_count: Number of buffers removed from the receive queue.
242  * @add_lock: Receive queue descriptor add spin lock.
243  *      This lock must be held in order to add buffers to the RX
244  *      descriptor ring (rxd and buffer) and to update added_count (but
245  *      not removed_count).
246  * @max_fill: RX descriptor maximum fill level (<= ring size)
247  * @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill
248  *      (<= @max_fill)
249  * @fast_fill_limit: The level to which a fast fill will fill
250  *      (@fast_fill_trigger <= @fast_fill_limit <= @max_fill)
251  * @min_fill: RX descriptor minimum non-zero fill level.
252  *      This records the minimum fill level observed when a ring
253  *      refill was triggered.
254  * @min_overfill: RX descriptor minimum overflow fill level.
255  *      This records the minimum fill level at which RX queue
256  *      overflow was observed.  It should never be set.
257  * @alloc_page_count: RX allocation strategy counter.
258  * @alloc_skb_count: RX allocation strategy counter.
259  * @work: Descriptor push work thread
260  * @buf_page: Page for next RX buffer.
261  *      We can use a single page for multiple RX buffers. This tracks
262  *      the remaining space in the allocation.
263  * @buf_dma_addr: Page's DMA address.
264  * @buf_data: Page's host address.
265  * @flushed: Use when handling queue flushing
266  */
267 struct efx_rx_queue {
268         struct efx_nic *efx;
269         int queue;
270         struct efx_channel *channel;
271         struct efx_rx_buffer *buffer;
272         struct efx_special_buffer rxd;
273
274         int added_count;
275         int notified_count;
276         int removed_count;
277         spinlock_t add_lock;
278         unsigned int max_fill;
279         unsigned int fast_fill_trigger;
280         unsigned int fast_fill_limit;
281         unsigned int min_fill;
282         unsigned int min_overfill;
283         unsigned int alloc_page_count;
284         unsigned int alloc_skb_count;
285         struct delayed_work work;
286         unsigned int slow_fill_count;
287
288         struct page *buf_page;
289         dma_addr_t buf_dma_addr;
290         char *buf_data;
291         bool flushed;
292 };
293
294 /**
295  * struct efx_buffer - An Efx general-purpose buffer
296  * @addr: host base address of the buffer
297  * @dma_addr: DMA base address of the buffer
298  * @len: Buffer length, in bytes
299  *
300  * Falcon uses these buffers for its interrupt status registers and
301  * MAC stats dumps.
302  */
303 struct efx_buffer {
304         void *addr;
305         dma_addr_t dma_addr;
306         unsigned int len;
307 };
308
309
310 /* Flags for channel->used_flags */
311 #define EFX_USED_BY_RX 1
312 #define EFX_USED_BY_TX 2
313 #define EFX_USED_BY_RX_TX (EFX_USED_BY_RX | EFX_USED_BY_TX)
314
315 enum efx_rx_alloc_method {
316         RX_ALLOC_METHOD_AUTO = 0,
317         RX_ALLOC_METHOD_SKB = 1,
318         RX_ALLOC_METHOD_PAGE = 2,
319 };
320
321 /**
322  * struct efx_channel - An Efx channel
323  *
324  * A channel comprises an event queue, at least one TX queue, at least
325  * one RX queue, and an associated tasklet for processing the event
326  * queue.
327  *
328  * @efx: Associated Efx NIC
329  * @channel: Channel instance number
330  * @used_flags: Channel is used by net driver
331  * @enabled: Channel enabled indicator
332  * @irq: IRQ number (MSI and MSI-X only)
333  * @irq_moderation: IRQ moderation value (in us)
334  * @napi_dev: Net device used with NAPI
335  * @napi_str: NAPI control structure
336  * @reset_work: Scheduled reset work thread
337  * @work_pending: Is work pending via NAPI?
338  * @eventq: Event queue buffer
339  * @eventq_read_ptr: Event queue read pointer
340  * @last_eventq_read_ptr: Last event queue read pointer value.
341  * @eventq_magic: Event queue magic value for driver-generated test events
342  * @lro_mgr: LRO state
343  * @rx_alloc_level: Watermark based heuristic counter for pushing descriptors
344  *      and diagnostic counters
345  * @rx_alloc_push_pages: RX allocation method currently in use for pushing
346  *      descriptors
347  * @rx_alloc_pop_pages: RX allocation method currently in use for popping
348  *      descriptors
349  * @n_rx_tobe_disc: Count of RX_TOBE_DISC errors
350  * @n_rx_ip_frag_err: Count of RX IP fragment errors
351  * @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors
352  * @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors
353  * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors
354  * @n_rx_overlength: Count of RX_OVERLENGTH errors
355  * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun
356  */
357 struct efx_channel {
358         struct efx_nic *efx;
359         int channel;
360         int used_flags;
361         bool enabled;
362         int irq;
363         unsigned int irq_moderation;
364         struct net_device *napi_dev;
365         struct napi_struct napi_str;
366         bool work_pending;
367         struct efx_special_buffer eventq;
368         unsigned int eventq_read_ptr;
369         unsigned int last_eventq_read_ptr;
370         unsigned int eventq_magic;
371
372         struct net_lro_mgr lro_mgr;
373         int rx_alloc_level;
374         int rx_alloc_push_pages;
375         int rx_alloc_pop_pages;
376
377         unsigned n_rx_tobe_disc;
378         unsigned n_rx_ip_frag_err;
379         unsigned n_rx_ip_hdr_chksum_err;
380         unsigned n_rx_tcp_udp_chksum_err;
381         unsigned n_rx_frm_trunc;
382         unsigned n_rx_overlength;
383         unsigned n_skbuff_leaks;
384
385         /* Used to pipeline received packets in order to optimise memory
386          * access with prefetches.
387          */
388         struct efx_rx_buffer *rx_pkt;
389         bool rx_pkt_csummed;
390
391 };
392
393 /**
394  * struct efx_blinker - S/W LED blinking context
395  * @led_num: LED ID (board-specific meaning)
396  * @state: Current state - on or off
397  * @resubmit: Timer resubmission flag
398  * @timer: Control timer for blinking
399  */
400 struct efx_blinker {
401         int led_num;
402         bool state;
403         bool resubmit;
404         struct timer_list timer;
405 };
406
407
408 /**
409  * struct efx_board - board information
410  * @type: Board model type
411  * @major: Major rev. ('A', 'B' ...)
412  * @minor: Minor rev. (0, 1, ...)
413  * @init: Initialisation function
414  * @init_leds: Sets up board LEDs
415  * @set_fault_led: Turns the fault LED on or off
416  * @blink: Starts/stops blinking
417  * @monitor: Board-specific health check function
418  * @fini: Cleanup function
419  * @blinker: used to blink LEDs in software
420  * @hwmon_client: I2C client for hardware monitor
421  * @ioexp_client: I2C client for power/port control
422  */
423 struct efx_board {
424         int type;
425         int major;
426         int minor;
427         int (*init) (struct efx_nic *nic);
428         /* As the LEDs are typically attached to the PHY, LEDs
429          * have a separate init callback that happens later than
430          * board init. */
431         int (*init_leds)(struct efx_nic *efx);
432         int (*monitor) (struct efx_nic *nic);
433         void (*set_fault_led) (struct efx_nic *efx, bool state);
434         void (*blink) (struct efx_nic *efx, bool start);
435         void (*fini) (struct efx_nic *nic);
436         struct efx_blinker blinker;
437         struct i2c_client *hwmon_client, *ioexp_client;
438 };
439
440 #define STRING_TABLE_LOOKUP(val, member)        \
441         member ## _names[val]
442
443 enum efx_int_mode {
444         /* Be careful if altering to correct macro below */
445         EFX_INT_MODE_MSIX = 0,
446         EFX_INT_MODE_MSI = 1,
447         EFX_INT_MODE_LEGACY = 2,
448         EFX_INT_MODE_MAX        /* Insert any new items before this */
449 };
450 #define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI)
451
452 enum phy_type {
453         PHY_TYPE_NONE = 0,
454         PHY_TYPE_CX4_RTMR = 1,
455         PHY_TYPE_1G_ALASKA = 2,
456         PHY_TYPE_10XPRESS = 3,
457         PHY_TYPE_XFP = 4,
458         PHY_TYPE_PM8358 = 6,
459         PHY_TYPE_MAX    /* Insert any new items before this */
460 };
461
462 #define PHY_ADDR_INVALID 0xff
463
464 enum nic_state {
465         STATE_INIT = 0,
466         STATE_RUNNING = 1,
467         STATE_FINI = 2,
468         STATE_DISABLED = 3,
469         STATE_MAX,
470 };
471
472 /*
473  * Alignment of page-allocated RX buffers
474  *
475  * Controls the number of bytes inserted at the start of an RX buffer.
476  * This is the equivalent of NET_IP_ALIGN [which controls the alignment
477  * of the skb->head for hardware DMA].
478  */
479 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
480 #define EFX_PAGE_IP_ALIGN 0
481 #else
482 #define EFX_PAGE_IP_ALIGN NET_IP_ALIGN
483 #endif
484
485 /*
486  * Alignment of the skb->head which wraps a page-allocated RX buffer
487  *
488  * The skb allocated to wrap an rx_buffer can have this alignment. Since
489  * the data is memcpy'd from the rx_buf, it does not need to be equal to
490  * EFX_PAGE_IP_ALIGN.
491  */
492 #define EFX_PAGE_SKB_ALIGN 2
493
494 /* Forward declaration */
495 struct efx_nic;
496
497 /* Pseudo bit-mask flow control field */
498 enum efx_fc_type {
499         EFX_FC_RX = 1,
500         EFX_FC_TX = 2,
501         EFX_FC_AUTO = 4,
502 };
503
504 /**
505  * struct efx_phy_operations - Efx PHY operations table
506  * @init: Initialise PHY
507  * @fini: Shut down PHY
508  * @reconfigure: Reconfigure PHY (e.g. for new link parameters)
509  * @clear_interrupt: Clear down interrupt
510  * @blink: Blink LEDs
511  * @check_hw: Check hardware
512  * @mmds: MMD presence mask
513  * @loopbacks: Supported loopback modes mask
514  */
515 struct efx_phy_operations {
516         int (*init) (struct efx_nic *efx);
517         void (*fini) (struct efx_nic *efx);
518         void (*reconfigure) (struct efx_nic *efx);
519         void (*clear_interrupt) (struct efx_nic *efx);
520         int (*check_hw) (struct efx_nic *efx);
521         int (*test) (struct efx_nic *efx);
522         int mmds;
523         unsigned loopbacks;
524 };
525
526 /**
527  * @enum efx_phy_mode - PHY operating mode flags
528  * @PHY_MODE_NORMAL: on and should pass traffic
529  * @PHY_MODE_TX_DISABLED: on with TX disabled
530  * @PHY_MODE_LOW_POWER: set to low power through MDIO
531  * @PHY_MODE_OFF: switched off through external control
532  * @PHY_MODE_SPECIAL: on but will not pass traffic
533  */
534 enum efx_phy_mode {
535         PHY_MODE_NORMAL         = 0,
536         PHY_MODE_TX_DISABLED    = 1,
537         PHY_MODE_LOW_POWER      = 2,
538         PHY_MODE_OFF            = 4,
539         PHY_MODE_SPECIAL        = 8,
540 };
541
542 static inline bool efx_phy_mode_disabled(enum efx_phy_mode mode)
543 {
544         return !!(mode & ~PHY_MODE_TX_DISABLED);
545 }
546
547 /*
548  * Efx extended statistics
549  *
550  * Not all statistics are provided by all supported MACs.  The purpose
551  * is this structure is to contain the raw statistics provided by each
552  * MAC.
553  */
554 struct efx_mac_stats {
555         u64 tx_bytes;
556         u64 tx_good_bytes;
557         u64 tx_bad_bytes;
558         unsigned long tx_packets;
559         unsigned long tx_bad;
560         unsigned long tx_pause;
561         unsigned long tx_control;
562         unsigned long tx_unicast;
563         unsigned long tx_multicast;
564         unsigned long tx_broadcast;
565         unsigned long tx_lt64;
566         unsigned long tx_64;
567         unsigned long tx_65_to_127;
568         unsigned long tx_128_to_255;
569         unsigned long tx_256_to_511;
570         unsigned long tx_512_to_1023;
571         unsigned long tx_1024_to_15xx;
572         unsigned long tx_15xx_to_jumbo;
573         unsigned long tx_gtjumbo;
574         unsigned long tx_collision;
575         unsigned long tx_single_collision;
576         unsigned long tx_multiple_collision;
577         unsigned long tx_excessive_collision;
578         unsigned long tx_deferred;
579         unsigned long tx_late_collision;
580         unsigned long tx_excessive_deferred;
581         unsigned long tx_non_tcpudp;
582         unsigned long tx_mac_src_error;
583         unsigned long tx_ip_src_error;
584         u64 rx_bytes;
585         u64 rx_good_bytes;
586         u64 rx_bad_bytes;
587         unsigned long rx_packets;
588         unsigned long rx_good;
589         unsigned long rx_bad;
590         unsigned long rx_pause;
591         unsigned long rx_control;
592         unsigned long rx_unicast;
593         unsigned long rx_multicast;
594         unsigned long rx_broadcast;
595         unsigned long rx_lt64;
596         unsigned long rx_64;
597         unsigned long rx_65_to_127;
598         unsigned long rx_128_to_255;
599         unsigned long rx_256_to_511;
600         unsigned long rx_512_to_1023;
601         unsigned long rx_1024_to_15xx;
602         unsigned long rx_15xx_to_jumbo;
603         unsigned long rx_gtjumbo;
604         unsigned long rx_bad_lt64;
605         unsigned long rx_bad_64_to_15xx;
606         unsigned long rx_bad_15xx_to_jumbo;
607         unsigned long rx_bad_gtjumbo;
608         unsigned long rx_overflow;
609         unsigned long rx_missed;
610         unsigned long rx_false_carrier;
611         unsigned long rx_symbol_error;
612         unsigned long rx_align_error;
613         unsigned long rx_length_error;
614         unsigned long rx_internal_error;
615         unsigned long rx_good_lt64;
616 };
617
618 /* Number of bits used in a multicast filter hash address */
619 #define EFX_MCAST_HASH_BITS 8
620
621 /* Number of (single-bit) entries in a multicast filter hash */
622 #define EFX_MCAST_HASH_ENTRIES (1 << EFX_MCAST_HASH_BITS)
623
624 /* An Efx multicast filter hash */
625 union efx_multicast_hash {
626         u8 byte[EFX_MCAST_HASH_ENTRIES / 8];
627         efx_oword_t oword[EFX_MCAST_HASH_ENTRIES / sizeof(efx_oword_t) / 8];
628 };
629
630 /**
631  * struct efx_nic - an Efx NIC
632  * @name: Device name (net device name or bus id before net device registered)
633  * @pci_dev: The PCI device
634  * @type: Controller type attributes
635  * @legacy_irq: IRQ number
636  * @workqueue: Workqueue for port reconfigures and the HW monitor.
637  *      Work items do not hold and must not acquire RTNL.
638  * @reset_work: Scheduled reset workitem
639  * @monitor_work: Hardware monitor workitem
640  * @membase_phys: Memory BAR value as physical address
641  * @membase: Memory BAR value
642  * @biu_lock: BIU (bus interface unit) lock
643  * @interrupt_mode: Interrupt mode
644  * @i2c_adap: I2C adapter
645  * @board_info: Board-level information
646  * @state: Device state flag. Serialised by the rtnl_lock.
647  * @reset_pending: Pending reset method (normally RESET_TYPE_NONE)
648  * @tx_queue: TX DMA queues
649  * @rx_queue: RX DMA queues
650  * @channel: Channels
651  * @n_rx_queues: Number of RX queues
652  * @rx_buffer_len: RX buffer length
653  * @rx_buffer_order: Order (log2) of number of pages for each RX buffer
654  * @irq_status: Interrupt status buffer
655  * @last_irq_cpu: Last CPU to handle interrupt.
656  *      This register is written with the SMP processor ID whenever an
657  *      interrupt is handled.  It is used by falcon_test_interrupt()
658  *      to verify that an interrupt has occurred.
659  * @spi_flash: SPI flash device
660  *      This field will be %NULL if no flash device is present.
661  * @spi_eeprom: SPI EEPROM device
662  *      This field will be %NULL if no EEPROM device is present.
663  * @spi_lock: SPI bus lock
664  * @n_rx_nodesc_drop_cnt: RX no descriptor drop count
665  * @nic_data: Hardware dependant state
666  * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
667  *      @port_inhibited, efx_monitor() and efx_reconfigure_port()
668  * @port_enabled: Port enabled indicator.
669  *      Serialises efx_stop_all(), efx_start_all() and efx_monitor() and
670  *      efx_reconfigure_work with kernel interfaces. Safe to read under any
671  *      one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must
672  *      be held to modify it.
673  * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock
674  * @port_initialized: Port initialized?
675  * @net_dev: Operating system network device. Consider holding the rtnl lock
676  * @rx_checksum_enabled: RX checksumming enabled
677  * @netif_stop_count: Port stop count
678  * @netif_stop_lock: Port stop lock
679  * @mac_stats: MAC statistics. These include all statistics the MACs
680  *      can provide.  Generic code converts these into a standard
681  *      &struct net_device_stats.
682  * @stats_buffer: DMA buffer for statistics
683  * @stats_lock: Statistics update lock. Serialises statistics fetches
684  * @stats_enabled: Temporarily disable statistics fetches.
685  *      Serialised by @stats_lock
686  * @mac_address: Permanent MAC address
687  * @phy_type: PHY type
688  * @phy_lock: PHY access lock
689  * @phy_op: PHY interface
690  * @phy_data: PHY private data (including PHY-specific stats)
691  * @mii: PHY interface
692  * @phy_mode: PHY operating mode. Serialised by @mac_lock.
693  * @link_up: Link status
694  * @link_options: Link options (MII/GMII format)
695  * @n_link_state_changes: Number of times the link has changed state
696  * @promiscuous: Promiscuous flag. Protected by netif_tx_lock.
697  * @multicast_hash: Multicast hash table
698  * @flow_control: Flow control flags - separate RX/TX so can't use link_options
699  * @reconfigure_work: work item for dealing with PHY events
700  * @loopback_mode: Loopback status
701  * @loopback_modes: Supported loopback mode bitmask
702  * @loopback_selftest: Offline self-test private state
703  *
704  * The @priv field of the corresponding &struct net_device points to
705  * this.
706  */
707 struct efx_nic {
708         char name[IFNAMSIZ];
709         struct pci_dev *pci_dev;
710         const struct efx_nic_type *type;
711         int legacy_irq;
712         struct workqueue_struct *workqueue;
713         struct work_struct reset_work;
714         struct delayed_work monitor_work;
715         resource_size_t membase_phys;
716         void __iomem *membase;
717         spinlock_t biu_lock;
718         enum efx_int_mode interrupt_mode;
719
720         struct i2c_adapter i2c_adap;
721         struct efx_board board_info;
722
723         enum nic_state state;
724         enum reset_type reset_pending;
725
726         struct efx_tx_queue tx_queue[EFX_TX_QUEUE_COUNT];
727         struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES];
728         struct efx_channel channel[EFX_MAX_CHANNELS];
729
730         int n_rx_queues;
731         unsigned int rx_buffer_len;
732         unsigned int rx_buffer_order;
733
734         struct efx_buffer irq_status;
735         volatile signed int last_irq_cpu;
736
737         struct efx_spi_device *spi_flash;
738         struct efx_spi_device *spi_eeprom;
739         struct mutex spi_lock;
740
741         unsigned n_rx_nodesc_drop_cnt;
742
743         struct falcon_nic_data *nic_data;
744
745         struct mutex mac_lock;
746         bool port_enabled;
747         bool port_inhibited;
748
749         bool port_initialized;
750         struct net_device *net_dev;
751         bool rx_checksum_enabled;
752
753         atomic_t netif_stop_count;
754         spinlock_t netif_stop_lock;
755
756         struct efx_mac_stats mac_stats;
757         struct efx_buffer stats_buffer;
758         spinlock_t stats_lock;
759         bool stats_enabled;
760
761         unsigned char mac_address[ETH_ALEN];
762
763         enum phy_type phy_type;
764         spinlock_t phy_lock;
765         struct efx_phy_operations *phy_op;
766         void *phy_data;
767         struct mii_if_info mii;
768         enum efx_phy_mode phy_mode;
769
770         bool link_up;
771         unsigned int link_options;
772         unsigned int n_link_state_changes;
773
774         bool promiscuous;
775         union efx_multicast_hash multicast_hash;
776         enum efx_fc_type flow_control;
777         struct work_struct reconfigure_work;
778
779         atomic_t rx_reset;
780         enum efx_loopback_mode loopback_mode;
781         unsigned int loopback_modes;
782
783         void *loopback_selftest;
784 };
785
786 static inline int efx_dev_registered(struct efx_nic *efx)
787 {
788         return efx->net_dev->reg_state == NETREG_REGISTERED;
789 }
790
791 /* Net device name, for inclusion in log messages if it has been registered.
792  * Use efx->name not efx->net_dev->name so that races with (un)registration
793  * are harmless.
794  */
795 static inline const char *efx_dev_name(struct efx_nic *efx)
796 {
797         return efx_dev_registered(efx) ? efx->name : "";
798 }
799
800 /**
801  * struct efx_nic_type - Efx device type definition
802  * @mem_bar: Memory BAR number
803  * @mem_map_size: Memory BAR mapped size
804  * @txd_ptr_tbl_base: TX descriptor ring base address
805  * @rxd_ptr_tbl_base: RX descriptor ring base address
806  * @buf_tbl_base: Buffer table base address
807  * @evq_ptr_tbl_base: Event queue pointer table base address
808  * @evq_rptr_tbl_base: Event queue read-pointer table base address
809  * @txd_ring_mask: TX descriptor ring size - 1 (must be a power of two - 1)
810  * @rxd_ring_mask: RX descriptor ring size - 1 (must be a power of two - 1)
811  * @evq_size: Event queue size (must be a power of two)
812  * @max_dma_mask: Maximum possible DMA mask
813  * @tx_dma_mask: TX DMA mask
814  * @bug5391_mask: Address mask for bug 5391 workaround
815  * @rx_xoff_thresh: RX FIFO XOFF watermark (bytes)
816  * @rx_xon_thresh: RX FIFO XON watermark (bytes)
817  * @rx_buffer_padding: Padding added to each RX buffer
818  * @max_interrupt_mode: Highest capability interrupt mode supported
819  *      from &enum efx_init_mode.
820  * @phys_addr_channels: Number of channels with physically addressed
821  *      descriptors
822  */
823 struct efx_nic_type {
824         unsigned int mem_bar;
825         unsigned int mem_map_size;
826         unsigned int txd_ptr_tbl_base;
827         unsigned int rxd_ptr_tbl_base;
828         unsigned int buf_tbl_base;
829         unsigned int evq_ptr_tbl_base;
830         unsigned int evq_rptr_tbl_base;
831
832         unsigned int txd_ring_mask;
833         unsigned int rxd_ring_mask;
834         unsigned int evq_size;
835         u64 max_dma_mask;
836         unsigned int tx_dma_mask;
837         unsigned bug5391_mask;
838
839         int rx_xoff_thresh;
840         int rx_xon_thresh;
841         unsigned int rx_buffer_padding;
842         unsigned int max_interrupt_mode;
843         unsigned int phys_addr_channels;
844 };
845
846 /**************************************************************************
847  *
848  * Prototypes and inline functions
849  *
850  *************************************************************************/
851
852 /* Iterate over all used channels */
853 #define efx_for_each_channel(_channel, _efx)                            \
854         for (_channel = &_efx->channel[0];                              \
855              _channel < &_efx->channel[EFX_MAX_CHANNELS];               \
856              _channel++)                                                \
857                 if (!_channel->used_flags)                              \
858                         continue;                                       \
859                 else
860
861 /* Iterate over all used TX queues */
862 #define efx_for_each_tx_queue(_tx_queue, _efx)                          \
863         for (_tx_queue = &_efx->tx_queue[0];                            \
864              _tx_queue < &_efx->tx_queue[EFX_TX_QUEUE_COUNT];           \
865              _tx_queue++)
866
867 /* Iterate over all TX queues belonging to a channel */
868 #define efx_for_each_channel_tx_queue(_tx_queue, _channel)              \
869         for (_tx_queue = &_channel->efx->tx_queue[0];                   \
870              _tx_queue < &_channel->efx->tx_queue[EFX_TX_QUEUE_COUNT];  \
871              _tx_queue++)                                               \
872                 if (_tx_queue->channel != _channel)                     \
873                         continue;                                       \
874                 else
875
876 /* Iterate over all used RX queues */
877 #define efx_for_each_rx_queue(_rx_queue, _efx)                          \
878         for (_rx_queue = &_efx->rx_queue[0];                            \
879              _rx_queue < &_efx->rx_queue[_efx->n_rx_queues];            \
880              _rx_queue++)
881
882 /* Iterate over all RX queues belonging to a channel */
883 #define efx_for_each_channel_rx_queue(_rx_queue, _channel)              \
884         for (_rx_queue = &_channel->efx->rx_queue[_channel->channel];   \
885              _rx_queue;                                                 \
886              _rx_queue = NULL)                                          \
887                 if (_rx_queue->channel != _channel)                     \
888                         continue;                                       \
889                 else
890
891 /* Returns a pointer to the specified receive buffer in the RX
892  * descriptor queue.
893  */
894 static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue,
895                                                   unsigned int index)
896 {
897         return (&rx_queue->buffer[index]);
898 }
899
900 /* Set bit in a little-endian bitfield */
901 static inline void set_bit_le(unsigned nr, unsigned char *addr)
902 {
903         addr[nr / 8] |= (1 << (nr % 8));
904 }
905
906 /* Clear bit in a little-endian bitfield */
907 static inline void clear_bit_le(unsigned nr, unsigned char *addr)
908 {
909         addr[nr / 8] &= ~(1 << (nr % 8));
910 }
911
912
913 /**
914  * EFX_MAX_FRAME_LEN - calculate maximum frame length
915  *
916  * This calculates the maximum frame length that will be used for a
917  * given MTU.  The frame length will be equal to the MTU plus a
918  * constant amount of header space and padding.  This is the quantity
919  * that the net driver will program into the MAC as the maximum frame
920  * length.
921  *
922  * The 10G MAC used in Falcon requires 8-byte alignment on the frame
923  * length, so we round up to the nearest 8.
924  */
925 #define EFX_MAX_FRAME_LEN(mtu) \
926         ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */) + 7) & ~7)
927
928
929 #endif /* EFX_NET_DRIVER_H */