Merge branch 'master' of /home/tglx/work/mtd/git/linux-2.6.git/
[linux-2.6] / drivers / acpi / dispatcher / dsutils.c
1 /*******************************************************************************
2  *
3  * Module Name: dsutils - Dispatcher utilities
4  *
5  ******************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2005, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include <acpi/acparser.h>
46 #include <acpi/amlcode.h>
47 #include <acpi/acdispat.h>
48 #include <acpi/acinterp.h>
49 #include <acpi/acnamesp.h>
50 #include <acpi/acdebug.h>
51
52 #define _COMPONENT          ACPI_DISPATCHER
53 ACPI_MODULE_NAME("dsutils")
54
55 /*******************************************************************************
56  *
57  * FUNCTION:    acpi_ds_clear_implicit_return
58  *
59  * PARAMETERS:  walk_state          - Current State
60  *
61  * RETURN:      None.
62  *
63  * DESCRIPTION: Clear and remove a reference on an implicit return value.  Used
64  *              to delete "stale" return values (if enabled, the return value
65  *              from every operator is saved at least momentarily, in case the
66  *              parent method exits.)
67  *
68  ******************************************************************************/
69 void acpi_ds_clear_implicit_return(struct acpi_walk_state *walk_state)
70 {
71         ACPI_FUNCTION_NAME("ds_clear_implicit_return");
72
73         /*
74          * Slack must be enabled for this feature
75          */
76         if (!acpi_gbl_enable_interpreter_slack) {
77                 return;
78         }
79
80         if (walk_state->implicit_return_obj) {
81                 /*
82                  * Delete any "stale" implicit return. However, in
83                  * complex statements, the implicit return value can be
84                  * bubbled up several levels.
85                  */
86                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
87                                   "Removing reference on stale implicit return obj %p\n",
88                                   walk_state->implicit_return_obj));
89
90                 acpi_ut_remove_reference(walk_state->implicit_return_obj);
91                 walk_state->implicit_return_obj = NULL;
92         }
93 }
94
95 #ifndef ACPI_NO_METHOD_EXECUTION
96 /*******************************************************************************
97  *
98  * FUNCTION:    acpi_ds_do_implicit_return
99  *
100  * PARAMETERS:  return_desc         - The return value
101  *              walk_state          - Current State
102  *              add_reference       - True if a reference should be added to the
103  *                                    return object
104  *
105  * RETURN:      TRUE if implicit return enabled, FALSE otherwise
106  *
107  * DESCRIPTION: Implements the optional "implicit return".  We save the result
108  *              of every ASL operator and control method invocation in case the
109  *              parent method exit.  Before storing a new return value, we
110  *              delete the previous return value.
111  *
112  ******************************************************************************/
113
114 u8
115 acpi_ds_do_implicit_return(union acpi_operand_object *return_desc,
116                            struct acpi_walk_state *walk_state, u8 add_reference)
117 {
118         ACPI_FUNCTION_NAME("ds_do_implicit_return");
119
120         /*
121          * Slack must be enabled for this feature, and we must
122          * have a valid return object
123          */
124         if ((!acpi_gbl_enable_interpreter_slack) || (!return_desc)) {
125                 return (FALSE);
126         }
127
128         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
129                           "Result %p will be implicitly returned; Prev=%p\n",
130                           return_desc, walk_state->implicit_return_obj));
131
132         /*
133          * Delete any "stale" implicit return value first. However, in
134          * complex statements, the implicit return value can be
135          * bubbled up several levels, so we don't clear the value if it
136          * is the same as the return_desc.
137          */
138         if (walk_state->implicit_return_obj) {
139                 if (walk_state->implicit_return_obj == return_desc) {
140                         return (TRUE);
141                 }
142                 acpi_ds_clear_implicit_return(walk_state);
143         }
144
145         /* Save the implicit return value, add a reference if requested */
146
147         walk_state->implicit_return_obj = return_desc;
148         if (add_reference) {
149                 acpi_ut_add_reference(return_desc);
150         }
151
152         return (TRUE);
153 }
154
155 /*******************************************************************************
156  *
157  * FUNCTION:    acpi_ds_is_result_used
158  *
159  * PARAMETERS:  Op                  - Current Op
160  *              walk_state          - Current State
161  *
162  * RETURN:      TRUE if result is used, FALSE otherwise
163  *
164  * DESCRIPTION: Check if a result object will be used by the parent
165  *
166  ******************************************************************************/
167
168 u8
169 acpi_ds_is_result_used(union acpi_parse_object * op,
170                        struct acpi_walk_state * walk_state)
171 {
172         const struct acpi_opcode_info *parent_info;
173
174         ACPI_FUNCTION_TRACE_PTR("ds_is_result_used", op);
175
176         /* Must have both an Op and a Result Object */
177
178         if (!op) {
179                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null Op\n"));
180                 return_VALUE(TRUE);
181         }
182
183         /*
184          * We know that this operator is not a
185          * Return() operator (would not come here.) The following code is the
186          * optional support for a so-called "implicit return". Some AML code
187          * assumes that the last value of the method is "implicitly" returned
188          * to the caller. Just save the last result as the return value.
189          * NOTE: this is optional because the ASL language does not actually
190          * support this behavior.
191          */
192         (void)acpi_ds_do_implicit_return(walk_state->result_obj, walk_state,
193                                          TRUE);
194
195         /*
196          * Now determine if the parent will use the result
197          *
198          * If there is no parent, or the parent is a scope_op, we are executing
199          * at the method level. An executing method typically has no parent,
200          * since each method is parsed separately.  A method invoked externally
201          * via execute_control_method has a scope_op as the parent.
202          */
203         if ((!op->common.parent) ||
204             (op->common.parent->common.aml_opcode == AML_SCOPE_OP)) {
205                 /* No parent, the return value cannot possibly be used */
206
207                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
208                                   "At Method level, result of [%s] not used\n",
209                                   acpi_ps_get_opcode_name(op->common.
210                                                           aml_opcode)));
211                 return_VALUE(FALSE);
212         }
213
214         /* Get info on the parent. The root_op is AML_SCOPE */
215
216         parent_info =
217             acpi_ps_get_opcode_info(op->common.parent->common.aml_opcode);
218         if (parent_info->class == AML_CLASS_UNKNOWN) {
219                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
220                                   "Unknown parent opcode. Op=%p\n", op));
221                 return_VALUE(FALSE);
222         }
223
224         /*
225          * Decide what to do with the result based on the parent.  If
226          * the parent opcode will not use the result, delete the object.
227          * Otherwise leave it as is, it will be deleted when it is used
228          * as an operand later.
229          */
230         switch (parent_info->class) {
231         case AML_CLASS_CONTROL:
232
233                 switch (op->common.parent->common.aml_opcode) {
234                 case AML_RETURN_OP:
235
236                         /* Never delete the return value associated with a return opcode */
237
238                         goto result_used;
239
240                 case AML_IF_OP:
241                 case AML_WHILE_OP:
242
243                         /*
244                          * If we are executing the predicate AND this is the predicate op,
245                          * we will use the return value
246                          */
247                         if ((walk_state->control_state->common.state ==
248                              ACPI_CONTROL_PREDICATE_EXECUTING)
249                             && (walk_state->control_state->control.
250                                 predicate_op == op)) {
251                                 goto result_used;
252                         }
253                         break;
254
255                 default:
256                         /* Ignore other control opcodes */
257                         break;
258                 }
259
260                 /* The general control opcode returns no result */
261
262                 goto result_not_used;
263
264         case AML_CLASS_CREATE:
265
266                 /*
267                  * These opcodes allow term_arg(s) as operands and therefore
268                  * the operands can be method calls.  The result is used.
269                  */
270                 goto result_used;
271
272         case AML_CLASS_NAMED_OBJECT:
273
274                 if ((op->common.parent->common.aml_opcode == AML_REGION_OP) ||
275                     (op->common.parent->common.aml_opcode == AML_DATA_REGION_OP)
276                     || (op->common.parent->common.aml_opcode == AML_PACKAGE_OP)
277                     || (op->common.parent->common.aml_opcode ==
278                         AML_VAR_PACKAGE_OP)
279                     || (op->common.parent->common.aml_opcode == AML_BUFFER_OP)
280                     || (op->common.parent->common.aml_opcode ==
281                         AML_INT_EVAL_SUBTREE_OP)) {
282                         /*
283                          * These opcodes allow term_arg(s) as operands and therefore
284                          * the operands can be method calls.  The result is used.
285                          */
286                         goto result_used;
287                 }
288
289                 goto result_not_used;
290
291         default:
292
293                 /*
294                  * In all other cases. the parent will actually use the return
295                  * object, so keep it.
296                  */
297                 goto result_used;
298         }
299
300       result_used:
301         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
302                           "Result of [%s] used by Parent [%s] Op=%p\n",
303                           acpi_ps_get_opcode_name(op->common.aml_opcode),
304                           acpi_ps_get_opcode_name(op->common.parent->common.
305                                                   aml_opcode), op));
306
307         return_VALUE(TRUE);
308
309       result_not_used:
310         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
311                           "Result of [%s] not used by Parent [%s] Op=%p\n",
312                           acpi_ps_get_opcode_name(op->common.aml_opcode),
313                           acpi_ps_get_opcode_name(op->common.parent->common.
314                                                   aml_opcode), op));
315
316         return_VALUE(FALSE);
317 }
318
319 /*******************************************************************************
320  *
321  * FUNCTION:    acpi_ds_delete_result_if_not_used
322  *
323  * PARAMETERS:  Op              - Current parse Op
324  *              result_obj      - Result of the operation
325  *              walk_state      - Current state
326  *
327  * RETURN:      Status
328  *
329  * DESCRIPTION: Used after interpretation of an opcode.  If there is an internal
330  *              result descriptor, check if the parent opcode will actually use
331  *              this result.  If not, delete the result now so that it will
332  *              not become orphaned.
333  *
334  ******************************************************************************/
335
336 void
337 acpi_ds_delete_result_if_not_used(union acpi_parse_object *op,
338                                   union acpi_operand_object *result_obj,
339                                   struct acpi_walk_state *walk_state)
340 {
341         union acpi_operand_object *obj_desc;
342         acpi_status status;
343
344         ACPI_FUNCTION_TRACE_PTR("ds_delete_result_if_not_used", result_obj);
345
346         if (!op) {
347                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null Op\n"));
348                 return_VOID;
349         }
350
351         if (!result_obj) {
352                 return_VOID;
353         }
354
355         if (!acpi_ds_is_result_used(op, walk_state)) {
356                 /* Must pop the result stack (obj_desc should be equal to result_obj) */
357
358                 status = acpi_ds_result_pop(&obj_desc, walk_state);
359                 if (ACPI_SUCCESS(status)) {
360                         acpi_ut_remove_reference(result_obj);
361                 }
362         }
363
364         return_VOID;
365 }
366
367 /*******************************************************************************
368  *
369  * FUNCTION:    acpi_ds_resolve_operands
370  *
371  * PARAMETERS:  walk_state          - Current walk state with operands on stack
372  *
373  * RETURN:      Status
374  *
375  * DESCRIPTION: Resolve all operands to their values.  Used to prepare
376  *              arguments to a control method invocation (a call from one
377  *              method to another.)
378  *
379  ******************************************************************************/
380
381 acpi_status acpi_ds_resolve_operands(struct acpi_walk_state *walk_state)
382 {
383         u32 i;
384         acpi_status status = AE_OK;
385
386         ACPI_FUNCTION_TRACE_PTR("ds_resolve_operands", walk_state);
387
388         /*
389          * Attempt to resolve each of the valid operands
390          * Method arguments are passed by reference, not by value.  This means
391          * that the actual objects are passed, not copies of the objects.
392          */
393         for (i = 0; i < walk_state->num_operands; i++) {
394                 status =
395                     acpi_ex_resolve_to_value(&walk_state->operands[i],
396                                              walk_state);
397                 if (ACPI_FAILURE(status)) {
398                         break;
399                 }
400         }
401
402         return_ACPI_STATUS(status);
403 }
404
405 /*******************************************************************************
406  *
407  * FUNCTION:    acpi_ds_clear_operands
408  *
409  * PARAMETERS:  walk_state          - Current walk state with operands on stack
410  *
411  * RETURN:      None
412  *
413  * DESCRIPTION: Clear all operands on the current walk state operand stack.
414  *
415  ******************************************************************************/
416
417 void acpi_ds_clear_operands(struct acpi_walk_state *walk_state)
418 {
419         u32 i;
420
421         ACPI_FUNCTION_TRACE_PTR("ds_clear_operands", walk_state);
422
423         /* Remove a reference on each operand on the stack */
424
425         for (i = 0; i < walk_state->num_operands; i++) {
426                 /*
427                  * Remove a reference to all operands, including both
428                  * "Arguments" and "Targets".
429                  */
430                 acpi_ut_remove_reference(walk_state->operands[i]);
431                 walk_state->operands[i] = NULL;
432         }
433
434         walk_state->num_operands = 0;
435         return_VOID;
436 }
437 #endif
438
439 /*******************************************************************************
440  *
441  * FUNCTION:    acpi_ds_create_operand
442  *
443  * PARAMETERS:  walk_state      - Current walk state
444  *              Arg             - Parse object for the argument
445  *              arg_index       - Which argument (zero based)
446  *
447  * RETURN:      Status
448  *
449  * DESCRIPTION: Translate a parse tree object that is an argument to an AML
450  *              opcode to the equivalent interpreter object.  This may include
451  *              looking up a name or entering a new name into the internal
452  *              namespace.
453  *
454  ******************************************************************************/
455
456 acpi_status
457 acpi_ds_create_operand(struct acpi_walk_state *walk_state,
458                        union acpi_parse_object *arg, u32 arg_index)
459 {
460         acpi_status status = AE_OK;
461         char *name_string;
462         u32 name_length;
463         union acpi_operand_object *obj_desc;
464         union acpi_parse_object *parent_op;
465         u16 opcode;
466         acpi_interpreter_mode interpreter_mode;
467         const struct acpi_opcode_info *op_info;
468
469         ACPI_FUNCTION_TRACE_PTR("ds_create_operand", arg);
470
471         /* A valid name must be looked up in the namespace */
472
473         if ((arg->common.aml_opcode == AML_INT_NAMEPATH_OP) &&
474             (arg->common.value.string)) {
475                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Getting a name: Arg=%p\n",
476                                   arg));
477
478                 /* Get the entire name string from the AML stream */
479
480                 status =
481                     acpi_ex_get_name_string(ACPI_TYPE_ANY,
482                                             arg->common.value.buffer,
483                                             &name_string, &name_length);
484
485                 if (ACPI_FAILURE(status)) {
486                         return_ACPI_STATUS(status);
487                 }
488
489                 /* All prefixes have been handled, and the name is in name_string */
490
491                 /*
492                  * Special handling for buffer_field declarations. This is a deferred
493                  * opcode that unfortunately defines the field name as the last
494                  * parameter instead of the first.  We get here when we are performing
495                  * the deferred execution, so the actual name of the field is already
496                  * in the namespace.  We don't want to attempt to look it up again
497                  * because we may be executing in a different scope than where the
498                  * actual opcode exists.
499                  */
500                 if ((walk_state->deferred_node) &&
501                     (walk_state->deferred_node->type == ACPI_TYPE_BUFFER_FIELD)
502                     && (arg_index != 0)) {
503                         obj_desc =
504                             ACPI_CAST_PTR(union acpi_operand_object,
505                                           walk_state->deferred_node);
506                         status = AE_OK;
507                 } else {        /* All other opcodes */
508
509                         /*
510                          * Differentiate between a namespace "create" operation
511                          * versus a "lookup" operation (IMODE_LOAD_PASS2 vs.
512                          * IMODE_EXECUTE) in order to support the creation of
513                          * namespace objects during the execution of control methods.
514                          */
515                         parent_op = arg->common.parent;
516                         op_info =
517                             acpi_ps_get_opcode_info(parent_op->common.
518                                                     aml_opcode);
519                         if ((op_info->flags & AML_NSNODE)
520                             && (parent_op->common.aml_opcode !=
521                                 AML_INT_METHODCALL_OP)
522                             && (parent_op->common.aml_opcode != AML_REGION_OP)
523                             && (parent_op->common.aml_opcode !=
524                                 AML_INT_NAMEPATH_OP)) {
525                                 /* Enter name into namespace if not found */
526
527                                 interpreter_mode = ACPI_IMODE_LOAD_PASS2;
528                         } else {
529                                 /* Return a failure if name not found */
530
531                                 interpreter_mode = ACPI_IMODE_EXECUTE;
532                         }
533
534                         status =
535                             acpi_ns_lookup(walk_state->scope_info, name_string,
536                                            ACPI_TYPE_ANY, interpreter_mode,
537                                            ACPI_NS_SEARCH_PARENT |
538                                            ACPI_NS_DONT_OPEN_SCOPE, walk_state,
539                                            ACPI_CAST_INDIRECT_PTR(struct
540                                                                   acpi_namespace_node,
541                                                                   &obj_desc));
542                         /*
543                          * The only case where we pass through (ignore) a NOT_FOUND
544                          * error is for the cond_ref_of opcode.
545                          */
546                         if (status == AE_NOT_FOUND) {
547                                 if (parent_op->common.aml_opcode ==
548                                     AML_COND_REF_OF_OP) {
549                                         /*
550                                          * For the Conditional Reference op, it's OK if
551                                          * the name is not found;  We just need a way to
552                                          * indicate this to the interpreter, set the
553                                          * object to the root
554                                          */
555                                         obj_desc =
556                                             ACPI_CAST_PTR(union
557                                                           acpi_operand_object,
558                                                           acpi_gbl_root_node);
559                                         status = AE_OK;
560                                 } else {
561                                         /*
562                                          * We just plain didn't find it -- which is a
563                                          * very serious error at this point
564                                          */
565                                         status = AE_AML_NAME_NOT_FOUND;
566                                 }
567                         }
568
569                         if (ACPI_FAILURE(status)) {
570                                 ACPI_REPORT_NSERROR(name_string, status);
571                         }
572                 }
573
574                 /* Free the namestring created above */
575
576                 ACPI_MEM_FREE(name_string);
577
578                 /* Check status from the lookup */
579
580                 if (ACPI_FAILURE(status)) {
581                         return_ACPI_STATUS(status);
582                 }
583
584                 /* Put the resulting object onto the current object stack */
585
586                 status = acpi_ds_obj_stack_push(obj_desc, walk_state);
587                 if (ACPI_FAILURE(status)) {
588                         return_ACPI_STATUS(status);
589                 }
590                 ACPI_DEBUGGER_EXEC(acpi_db_display_argument_object
591                                    (obj_desc, walk_state));
592         } else {
593                 /* Check for null name case */
594
595                 if (arg->common.aml_opcode == AML_INT_NAMEPATH_OP) {
596                         /*
597                          * If the name is null, this means that this is an
598                          * optional result parameter that was not specified
599                          * in the original ASL.  Create a Zero Constant for a
600                          * placeholder.  (Store to a constant is a Noop.)
601                          */
602                         opcode = AML_ZERO_OP;   /* Has no arguments! */
603
604                         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
605                                           "Null namepath: Arg=%p\n", arg));
606                 } else {
607                         opcode = arg->common.aml_opcode;
608                 }
609
610                 /* Get the object type of the argument */
611
612                 op_info = acpi_ps_get_opcode_info(opcode);
613                 if (op_info->object_type == ACPI_TYPE_INVALID) {
614                         return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
615                 }
616
617                 if (op_info->flags & AML_HAS_RETVAL) {
618                         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
619                                           "Argument previously created, already stacked \n"));
620
621                         ACPI_DEBUGGER_EXEC(acpi_db_display_argument_object
622                                            (walk_state->
623                                             operands[walk_state->num_operands -
624                                                      1], walk_state));
625
626                         /*
627                          * Use value that was already previously returned
628                          * by the evaluation of this argument
629                          */
630                         status =
631                             acpi_ds_result_pop_from_bottom(&obj_desc,
632                                                            walk_state);
633                         if (ACPI_FAILURE(status)) {
634                                 /*
635                                  * Only error is underflow, and this indicates
636                                  * a missing or null operand!
637                                  */
638                                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
639                                                   "Missing or null operand, %s\n",
640                                                   acpi_format_exception
641                                                   (status)));
642                                 return_ACPI_STATUS(status);
643                         }
644                 } else {
645                         /* Create an ACPI_INTERNAL_OBJECT for the argument */
646
647                         obj_desc =
648                             acpi_ut_create_internal_object(op_info->
649                                                            object_type);
650                         if (!obj_desc) {
651                                 return_ACPI_STATUS(AE_NO_MEMORY);
652                         }
653
654                         /* Initialize the new object */
655
656                         status =
657                             acpi_ds_init_object_from_op(walk_state, arg, opcode,
658                                                         &obj_desc);
659                         if (ACPI_FAILURE(status)) {
660                                 acpi_ut_delete_object_desc(obj_desc);
661                                 return_ACPI_STATUS(status);
662                         }
663                 }
664
665                 /* Put the operand object on the object stack */
666
667                 status = acpi_ds_obj_stack_push(obj_desc, walk_state);
668                 if (ACPI_FAILURE(status)) {
669                         return_ACPI_STATUS(status);
670                 }
671
672                 ACPI_DEBUGGER_EXEC(acpi_db_display_argument_object
673                                    (obj_desc, walk_state));
674         }
675
676         return_ACPI_STATUS(AE_OK);
677 }
678
679 /*******************************************************************************
680  *
681  * FUNCTION:    acpi_ds_create_operands
682  *
683  * PARAMETERS:  walk_state          - Current state
684  *              first_arg           - First argument of a parser argument tree
685  *
686  * RETURN:      Status
687  *
688  * DESCRIPTION: Convert an operator's arguments from a parse tree format to
689  *              namespace objects and place those argument object on the object
690  *              stack in preparation for evaluation by the interpreter.
691  *
692  ******************************************************************************/
693
694 acpi_status
695 acpi_ds_create_operands(struct acpi_walk_state *walk_state,
696                         union acpi_parse_object *first_arg)
697 {
698         acpi_status status = AE_OK;
699         union acpi_parse_object *arg;
700         u32 arg_count = 0;
701
702         ACPI_FUNCTION_TRACE_PTR("ds_create_operands", first_arg);
703
704         /* For all arguments in the list... */
705
706         arg = first_arg;
707         while (arg) {
708                 status = acpi_ds_create_operand(walk_state, arg, arg_count);
709                 if (ACPI_FAILURE(status)) {
710                         goto cleanup;
711                 }
712
713                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
714                                   "Arg #%d (%p) done, Arg1=%p\n", arg_count,
715                                   arg, first_arg));
716
717                 /* Move on to next argument, if any */
718
719                 arg = arg->common.next;
720                 arg_count++;
721         }
722
723         return_ACPI_STATUS(status);
724
725       cleanup:
726         /*
727          * We must undo everything done above; meaning that we must
728          * pop everything off of the operand stack and delete those
729          * objects
730          */
731         (void)acpi_ds_obj_stack_pop_and_delete(arg_count, walk_state);
732
733         ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "While creating Arg %d - %s\n",
734                           (arg_count + 1), acpi_format_exception(status)));
735         return_ACPI_STATUS(status);
736 }