5 * This module is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version
8 * 2 of the License, or (at your option) any later version.
10 * This module implements the AX.25 protocol for kernel-based
11 * devices like TTYs. It interfaces between a raw TTY, and the
12 * kernel's AX.25 protocol layers, just like slip.c.
13 * AX.25 needs to be separated from slip.c while slip.c is no
14 * longer a static kernel device since it is a module.
15 * This method clears the way to implement other kiss protocols
16 * like mkiss smack g8bpq ..... so far only mkiss is implemented.
18 * Hans Alblas <hans@esrac.ele.tue.nl>
21 * Jonathan (G4KLX) Fixed to match Linux networking changes - 2.1.15.
22 * Matthias (DG2FEF) Added support for FlexNet CRC (on special request)
23 * Fixed bug in ax25_close(): dev_lock_wait() was
24 * called twice, causing a deadlock.
25 * Jeroen (PE1RXQ) Removed old MKISS_MAGIC stuff and calls to
27 * Remove cli() and fix rtnl lock usage.
30 #include <linux/config.h>
31 #include <linux/module.h>
32 #include <asm/system.h>
33 #include <linux/bitops.h>
34 #include <asm/uaccess.h>
35 #include <linux/string.h>
37 #include <linux/interrupt.h>
39 #include <linux/inet.h>
40 #include <linux/tty.h>
41 #include <linux/errno.h>
42 #include <linux/netdevice.h>
43 #include <linux/major.h>
44 #include <linux/init.h>
45 #include <linux/rtnetlink.h>
46 #include <linux/etherdevice.h>
47 #include <linux/skbuff.h>
48 #include <linux/if_arp.h>
56 #include <linux/tcp.h>
59 static char banner[] __initdata = KERN_INFO "mkiss: AX.25 Multikiss, Hans Albas PE1AYX\n";
61 typedef struct ax25_ctrl {
62 struct ax_disp ctrl; /* */
63 struct net_device dev; /* the device */
66 static ax25_ctrl_t **ax25_ctrls;
68 int ax25_maxdev = AX25_MAXDEV; /* Can be overridden with insmod! */
70 static struct tty_ldisc ax_ldisc;
72 static int ax25_init(struct net_device *);
73 static int kiss_esc(unsigned char *, unsigned char *, int);
74 static int kiss_esc_crc(unsigned char *, unsigned char *, unsigned short, int);
75 static void kiss_unesc(struct ax_disp *, unsigned char);
77 /*---------------------------------------------------------------------------*/
79 static const unsigned short Crc_flex_table[] = {
80 0x0f87, 0x1e0e, 0x2c95, 0x3d1c, 0x49a3, 0x582a, 0x6ab1, 0x7b38,
81 0x83cf, 0x9246, 0xa0dd, 0xb154, 0xc5eb, 0xd462, 0xe6f9, 0xf770,
82 0x1f06, 0x0e8f, 0x3c14, 0x2d9d, 0x5922, 0x48ab, 0x7a30, 0x6bb9,
83 0x934e, 0x82c7, 0xb05c, 0xa1d5, 0xd56a, 0xc4e3, 0xf678, 0xe7f1,
84 0x2e85, 0x3f0c, 0x0d97, 0x1c1e, 0x68a1, 0x7928, 0x4bb3, 0x5a3a,
85 0xa2cd, 0xb344, 0x81df, 0x9056, 0xe4e9, 0xf560, 0xc7fb, 0xd672,
86 0x3e04, 0x2f8d, 0x1d16, 0x0c9f, 0x7820, 0x69a9, 0x5b32, 0x4abb,
87 0xb24c, 0xa3c5, 0x915e, 0x80d7, 0xf468, 0xe5e1, 0xd77a, 0xc6f3,
88 0x4d83, 0x5c0a, 0x6e91, 0x7f18, 0x0ba7, 0x1a2e, 0x28b5, 0x393c,
89 0xc1cb, 0xd042, 0xe2d9, 0xf350, 0x87ef, 0x9666, 0xa4fd, 0xb574,
90 0x5d02, 0x4c8b, 0x7e10, 0x6f99, 0x1b26, 0x0aaf, 0x3834, 0x29bd,
91 0xd14a, 0xc0c3, 0xf258, 0xe3d1, 0x976e, 0x86e7, 0xb47c, 0xa5f5,
92 0x6c81, 0x7d08, 0x4f93, 0x5e1a, 0x2aa5, 0x3b2c, 0x09b7, 0x183e,
93 0xe0c9, 0xf140, 0xc3db, 0xd252, 0xa6ed, 0xb764, 0x85ff, 0x9476,
94 0x7c00, 0x6d89, 0x5f12, 0x4e9b, 0x3a24, 0x2bad, 0x1936, 0x08bf,
95 0xf048, 0xe1c1, 0xd35a, 0xc2d3, 0xb66c, 0xa7e5, 0x957e, 0x84f7,
96 0x8b8f, 0x9a06, 0xa89d, 0xb914, 0xcdab, 0xdc22, 0xeeb9, 0xff30,
97 0x07c7, 0x164e, 0x24d5, 0x355c, 0x41e3, 0x506a, 0x62f1, 0x7378,
98 0x9b0e, 0x8a87, 0xb81c, 0xa995, 0xdd2a, 0xcca3, 0xfe38, 0xefb1,
99 0x1746, 0x06cf, 0x3454, 0x25dd, 0x5162, 0x40eb, 0x7270, 0x63f9,
100 0xaa8d, 0xbb04, 0x899f, 0x9816, 0xeca9, 0xfd20, 0xcfbb, 0xde32,
101 0x26c5, 0x374c, 0x05d7, 0x145e, 0x60e1, 0x7168, 0x43f3, 0x527a,
102 0xba0c, 0xab85, 0x991e, 0x8897, 0xfc28, 0xeda1, 0xdf3a, 0xceb3,
103 0x3644, 0x27cd, 0x1556, 0x04df, 0x7060, 0x61e9, 0x5372, 0x42fb,
104 0xc98b, 0xd802, 0xea99, 0xfb10, 0x8faf, 0x9e26, 0xacbd, 0xbd34,
105 0x45c3, 0x544a, 0x66d1, 0x7758, 0x03e7, 0x126e, 0x20f5, 0x317c,
106 0xd90a, 0xc883, 0xfa18, 0xeb91, 0x9f2e, 0x8ea7, 0xbc3c, 0xadb5,
107 0x5542, 0x44cb, 0x7650, 0x67d9, 0x1366, 0x02ef, 0x3074, 0x21fd,
108 0xe889, 0xf900, 0xcb9b, 0xda12, 0xaead, 0xbf24, 0x8dbf, 0x9c36,
109 0x64c1, 0x7548, 0x47d3, 0x565a, 0x22e5, 0x336c, 0x01f7, 0x107e,
110 0xf808, 0xe981, 0xdb1a, 0xca93, 0xbe2c, 0xafa5, 0x9d3e, 0x8cb7,
111 0x7440, 0x65c9, 0x5752, 0x46db, 0x3264, 0x23ed, 0x1176, 0x00ff
114 /*---------------------------------------------------------------------------*/
116 static unsigned short calc_crc_flex(unsigned char *cp, int size)
118 unsigned short crc = 0xffff;
121 crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
126 /*---------------------------------------------------------------------------*/
128 static int check_crc_flex(unsigned char *cp, int size)
130 unsigned short crc = 0xffff;
136 crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
138 if ((crc & 0xffff) != 0x7070)
144 /*---------------------------------------------------------------------------*/
146 /* Find a free channel, and link in this `tty' line. */
147 static inline struct ax_disp *ax_alloc(void)
149 ax25_ctrl_t *axp=NULL;
152 for (i = 0; i < ax25_maxdev; i++) {
155 /* Not allocated ? */
160 if (!test_and_set_bit(AXF_INUSE, &axp->ctrl.flags))
164 /* Sorry, too many, all slots in use */
165 if (i >= ax25_maxdev)
168 /* If no channels are available, allocate one */
169 if (axp == NULL && (ax25_ctrls[i] = kmalloc(sizeof(ax25_ctrl_t), GFP_KERNEL)) != NULL) {
172 memset(axp, 0, sizeof(ax25_ctrl_t));
174 /* Initialize channel control data */
175 set_bit(AXF_INUSE, &axp->ctrl.flags);
176 sprintf(axp->dev.name, "ax%d", i++);
177 axp->ctrl.tty = NULL;
178 axp->dev.base_addr = i;
179 axp->dev.priv = (void *)&axp->ctrl;
180 axp->dev.next = NULL;
181 axp->dev.init = ax25_init;
185 * register device so that it can be ifconfig'ed
186 * ax25_init() will be called as a side-effect
187 * SIDE-EFFECT WARNING: ax25_init() CLEARS axp->ctrl !
189 if (register_netdev(&axp->dev) == 0) {
190 /* (Re-)Set the INUSE bit. Very Important! */
191 set_bit(AXF_INUSE, &axp->ctrl.flags);
192 axp->ctrl.dev = &axp->dev;
193 axp->dev.priv = (void *) &axp->ctrl;
197 clear_bit(AXF_INUSE,&axp->ctrl.flags);
198 printk(KERN_ERR "mkiss: ax_alloc() - register_netdev() failure.\n");
205 /* Free an AX25 channel. */
206 static inline void ax_free(struct ax_disp *ax)
208 /* Free all AX25 frame buffers. */
215 if (!test_and_clear_bit(AXF_INUSE, &ax->flags))
216 printk(KERN_ERR "mkiss: %s: ax_free for already free unit.\n", ax->dev->name);
219 static void ax_changedmtu(struct ax_disp *ax)
221 struct net_device *dev = ax->dev;
222 unsigned char *xbuff, *rbuff, *oxbuff, *orbuff;
228 * allow for arrival of larger UDP packets, even if we say not to
229 * also fixes a bug in which SunOS sends 512-byte packets even with
235 xbuff = kmalloc(len + 4, GFP_ATOMIC);
236 rbuff = kmalloc(len + 4, GFP_ATOMIC);
238 if (xbuff == NULL || rbuff == NULL) {
239 printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, MTU change cancelled.\n",
249 spin_lock_bh(&ax->buflock);
257 if (ax->xleft <= len) {
258 memcpy(ax->xbuff, ax->xhead, ax->xleft);
265 ax->xhead = ax->xbuff;
268 if (ax->rcount <= len) {
269 memcpy(ax->rbuff, orbuff, ax->rcount);
272 ax->rx_over_errors++;
273 set_bit(AXF_ERROR, &ax->flags);
277 ax->mtu = dev->mtu + 73;
280 spin_unlock_bh(&ax->buflock);
289 /* Set the "sending" flag. This must be atomic. */
290 static inline void ax_lock(struct ax_disp *ax)
292 netif_stop_queue(ax->dev);
296 /* Clear the "sending" flag. This must be atomic. */
297 static inline void ax_unlock(struct ax_disp *ax)
299 netif_start_queue(ax->dev);
302 /* Send one completely decapsulated AX.25 packet to the AX.25 layer. */
303 static void ax_bump(struct ax_disp *ax)
308 spin_lock_bh(&ax->buflock);
309 if (ax->rbuff[0] > 0x0f) {
310 if (ax->rbuff[0] & 0x20) {
311 ax->crcmode = CRC_MODE_FLEX;
312 if (check_crc_flex(ax->rbuff, ax->rcount) < 0) {
317 /* dl9sau bugfix: the trailling two bytes flexnet crc
318 * will not be passed to the kernel. thus we have
319 * to correct the kissparm signature, because it
320 * indicates a crc but there's none
325 spin_unlock_bh(&ax->buflock);
329 if ((skb = dev_alloc_skb(count)) == NULL) {
330 printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", ax->dev->name);
335 spin_lock_bh(&ax->buflock);
336 memcpy(skb_put(skb,count), ax->rbuff, count);
337 spin_unlock_bh(&ax->buflock);
338 skb->protocol = ax25_type_trans(skb, ax->dev);
340 ax->dev->last_rx = jiffies;
345 /* Encapsulate one AX.25 packet and stuff into a TTY queue. */
346 static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len)
351 if (ax->mtu != ax->dev->mtu + 73) /* Someone has been ifconfigging */
354 if (len > ax->mtu) { /* Sigh, shouldn't occur BUT ... */
356 printk(KERN_ERR "mkiss: %s: truncating oversized transmit packet!\n", ax->dev->name);
364 spin_lock_bh(&ax->buflock);
365 switch (ax->crcmode) {
370 crc = calc_crc_flex(p, len);
371 count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2);
375 count = kiss_esc(p, (unsigned char *)ax->xbuff, len);
379 ax->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
380 actual = ax->tty->driver->write(ax->tty, ax->xbuff, count);
382 ax->tx_bytes+=actual;
383 ax->dev->trans_start = jiffies;
384 ax->xleft = count - actual;
385 ax->xhead = ax->xbuff + actual;
387 spin_unlock_bh(&ax->buflock);
391 * Called by the driver when there's room for more data. If we have
392 * more packets to send, we send them here.
394 static void ax25_write_wakeup(struct tty_struct *tty)
397 struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
399 /* First make sure we're connected. */
400 if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev))
402 if (ax->xleft <= 0) {
403 /* Now serial buffer is almost free & we can start
404 * transmission of another packet
406 tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
408 netif_wake_queue(ax->dev);
412 actual = tty->driver->write(tty, ax->xhead, ax->xleft);
417 /* Encapsulate an AX.25 packet and kick it into a TTY queue. */
418 static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
420 struct ax_disp *ax = netdev_priv(dev);
422 if (!netif_running(dev)) {
423 printk(KERN_ERR "mkiss: %s: xmit call when iface is down\n", dev->name);
427 if (netif_queue_stopped(dev)) {
429 * May be we must check transmitter timeout here ?
430 * 14 Oct 1994 Dmitry Gorodchanin.
432 if (jiffies - dev->trans_start < 20 * HZ) {
433 /* 20 sec timeout not reached */
437 printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name,
438 (ax->tty->driver->chars_in_buffer(ax->tty) || ax->xleft) ?
439 "bad line quality" : "driver error");
442 ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
446 /* We were not busy, so we are now... :-) */
449 ax_encaps(ax, skb->data, skb->len);
456 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
458 /* Return the frame type ID */
459 static int ax_header(struct sk_buff *skb, struct net_device *dev, unsigned short type,
460 void *daddr, void *saddr, unsigned len)
463 if (type != htons(ETH_P_AX25))
464 return ax25_encapsulate(skb, dev, type, daddr, saddr, len);
470 static int ax_rebuild_header(struct sk_buff *skb)
473 return ax25_rebuild_header(skb);
479 #endif /* CONFIG_{AX25,AX25_MODULE} */
481 /* Open the low-level part of the AX25 channel. Easy! */
482 static int ax_open(struct net_device *dev)
484 struct ax_disp *ax = netdev_priv(dev);
491 * Allocate the frame buffers:
493 * rbuff Receive buffer.
494 * xbuff Transmit buffer.
499 * allow for arrival of larger UDP packets, even if we say not to
500 * also fixes a bug in which SunOS sends 512-byte packets even with
506 if ((ax->rbuff = kmalloc(len + 4, GFP_KERNEL)) == NULL)
509 if ((ax->xbuff = kmalloc(len + 4, GFP_KERNEL)) == NULL)
512 ax->mtu = dev->mtu + 73;
517 ax->flags &= (1 << AXF_INUSE); /* Clear ESCAPE & ERROR flags */
519 spin_lock_init(&ax->buflock);
521 netif_start_queue(dev);
532 /* Close the low-level part of the AX25 channel. Easy! */
533 static int ax_close(struct net_device *dev)
535 struct ax_disp *ax = netdev_priv(dev);
540 ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
542 netif_stop_queue(dev);
547 static int ax25_receive_room(struct tty_struct *tty)
549 return 65536; /* We can handle an infinite amount of data. :-) */
553 * Handle the 'receiver data ready' interrupt.
554 * This function is called by the 'tty_io' module in the kernel when
555 * a block of data has been received, which can now be decapsulated
556 * and sent on to the AX.25 layer for further processing.
558 static void ax25_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
560 struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
562 if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev))
566 * Argh! mtu change time! - costs us the packet part received
569 if (ax->mtu != ax->dev->mtu + 73)
572 /* Read the characters out of the buffer */
574 if (fp != NULL && *fp++) {
575 if (!test_and_set_bit(AXF_ERROR, &ax->flags))
581 kiss_unesc(ax, *cp++);
585 static int ax25_open(struct tty_struct *tty)
587 struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
590 /* First make sure we're not already connected. */
591 if (ax && ax->magic == AX25_MAGIC)
594 /* OK. Find a free AX25 channel to use. */
595 if ((ax = ax_alloc()) == NULL)
601 if (tty->driver->flush_buffer)
602 tty->driver->flush_buffer(tty);
604 /* Restore default settings */
605 ax->dev->type = ARPHRD_AX25;
607 /* Perform the low-level AX25 initialization. */
608 if ((err = ax_open(ax->dev)))
611 /* Done. We have linked the TTY line to a channel. */
612 return ax->dev->base_addr;
615 static void ax25_close(struct tty_struct *tty)
617 struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
619 /* First make sure we're connected. */
620 if (ax == NULL || ax->magic != AX25_MAGIC)
623 unregister_netdev(ax->dev);
625 tty->disc_data = NULL;
632 static struct net_device_stats *ax_get_stats(struct net_device *dev)
634 static struct net_device_stats stats;
635 struct ax_disp *ax = netdev_priv(dev);
637 memset(&stats, 0, sizeof(struct net_device_stats));
639 stats.rx_packets = ax->rx_packets;
640 stats.tx_packets = ax->tx_packets;
641 stats.rx_bytes = ax->rx_bytes;
642 stats.tx_bytes = ax->tx_bytes;
643 stats.rx_dropped = ax->rx_dropped;
644 stats.tx_dropped = ax->tx_dropped;
645 stats.tx_errors = ax->tx_errors;
646 stats.rx_errors = ax->rx_errors;
647 stats.rx_over_errors = ax->rx_over_errors;
653 /************************************************************************
654 * STANDARD ENCAPSULATION *
655 ************************************************************************/
657 static int kiss_esc(unsigned char *s, unsigned char *d, int len)
659 unsigned char *ptr = d;
663 * Send an initial END character to flush out any
664 * data that may have accumulated in the receiver
693 * OK its ugly, but tell me a better solution without copying the
694 * packet to a temporary buffer :-)
696 static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc, int len)
698 unsigned char *ptr = d;
730 static void kiss_unesc(struct ax_disp *ax, unsigned char s)
734 /* drop keeptest bit = VSV */
735 if (test_bit(AXF_KEEPTEST, &ax->flags))
736 clear_bit(AXF_KEEPTEST, &ax->flags);
738 if (!test_and_clear_bit(AXF_ERROR, &ax->flags) && (ax->rcount > 2))
741 clear_bit(AXF_ESCAPE, &ax->flags);
746 set_bit(AXF_ESCAPE, &ax->flags);
749 if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
753 if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
758 spin_lock_bh(&ax->buflock);
759 if (!test_bit(AXF_ERROR, &ax->flags)) {
760 if (ax->rcount < ax->buffsize) {
761 ax->rbuff[ax->rcount++] = s;
762 spin_unlock_bh(&ax->buflock);
766 ax->rx_over_errors++;
767 set_bit(AXF_ERROR, &ax->flags);
769 spin_unlock_bh(&ax->buflock);
773 static int ax_set_mac_address(struct net_device *dev, void __user *addr)
775 if (copy_from_user(dev->dev_addr, addr, AX25_ADDR_LEN))
780 static int ax_set_dev_mac_address(struct net_device *dev, void *addr)
782 struct sockaddr *sa = addr;
784 memcpy(dev->dev_addr, sa->sa_data, AX25_ADDR_LEN);
790 /* Perform I/O control on an active ax25 channel. */
791 static int ax25_disp_ioctl(struct tty_struct *tty, void *file, int cmd, void __user *arg)
793 struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
796 /* First make sure we're connected. */
797 if (ax == NULL || ax->magic != AX25_MAGIC)
802 if (copy_to_user(arg, ax->dev->name, strlen(ax->dev->name) + 1))
807 return put_user(4, (int __user *)arg);
810 if (get_user(tmp, (int __user *)arg))
813 ax->dev->addr_len = AX25_ADDR_LEN; /* sizeof an AX.25 addr */
814 ax->dev->hard_header_len = AX25_KISS_HEADER_LEN + AX25_MAX_HEADER_LEN + 3;
815 ax->dev->type = ARPHRD_AX25;
819 return ax_set_mac_address(ax->dev, arg);
826 static int ax_open_dev(struct net_device *dev)
828 struct ax_disp *ax = netdev_priv(dev);
837 /* Initialize the driver. Called by network startup. */
838 static int ax25_init(struct net_device *dev)
840 struct ax_disp *ax = netdev_priv(dev);
842 static char ax25_bcast[AX25_ADDR_LEN] =
843 {'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1};
844 static char ax25_test[AX25_ADDR_LEN] =
845 {'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1};
847 if (ax == NULL) /* Allocation failed ?? */
850 /* Set up the "AX25 Control Block". (And clear statistics) */
851 memset(ax, 0, sizeof (struct ax_disp));
852 ax->magic = AX25_MAGIC;
855 /* Finish setting up the DEVICE info. */
857 dev->hard_start_xmit = ax_xmit;
858 dev->open = ax_open_dev;
859 dev->stop = ax_close;
860 dev->get_stats = ax_get_stats;
861 dev->set_mac_address = ax_set_dev_mac_address;
862 dev->hard_header_len = 0;
864 dev->type = ARPHRD_AX25;
865 dev->tx_queue_len = 10;
866 dev->hard_header = ax_header;
867 dev->rebuild_header = ax_rebuild_header;
869 memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
870 memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN);
872 /* New-style flags. */
873 dev->flags = IFF_BROADCAST | IFF_MULTICAST;
879 /* ******************************************************************** */
880 /* * Init MKISS driver * */
881 /* ******************************************************************** */
883 static int __init mkiss_init_driver(void)
890 ax25_maxdev = 4; /* Sanity */
892 if ((ax25_ctrls = kmalloc(sizeof(void *) * ax25_maxdev, GFP_KERNEL)) == NULL) {
893 printk(KERN_ERR "mkiss: Can't allocate ax25_ctrls[] array!\n");
897 /* Clear the pointer array, we allocate devices when we need them */
898 memset(ax25_ctrls, 0, sizeof(void*) * ax25_maxdev); /* Pointers */
900 /* Fill in our line protocol discipline, and register it */
901 ax_ldisc.magic = TTY_LDISC_MAGIC;
902 ax_ldisc.name = "mkiss";
903 ax_ldisc.open = ax25_open;
904 ax_ldisc.close = ax25_close;
905 ax_ldisc.ioctl = (int (*)(struct tty_struct *, struct file *,
906 unsigned int, unsigned long))ax25_disp_ioctl;
907 ax_ldisc.receive_buf = ax25_receive_buf;
908 ax_ldisc.receive_room = ax25_receive_room;
909 ax_ldisc.write_wakeup = ax25_write_wakeup;
911 if ((status = tty_register_ldisc(N_AX25, &ax_ldisc)) != 0) {
912 printk(KERN_ERR "mkiss: can't register line discipline (err = %d)\n", status);
918 static void __exit mkiss_exit_driver(void)
922 for (i = 0; i < ax25_maxdev; i++) {
925 * VSV = if dev->start==0, then device
926 * unregistered while close proc.
928 if (netif_running(&ax25_ctrls[i]->dev))
929 unregister_netdev(&ax25_ctrls[i]->dev);
930 kfree(ax25_ctrls[i]);
937 if ((i = tty_unregister_ldisc(N_AX25)))
938 printk(KERN_ERR "mkiss: can't unregister line discipline (err = %d)\n", i);
941 MODULE_AUTHOR("Hans Albas PE1AYX <hans@esrac.ele.tue.nl>");
942 MODULE_DESCRIPTION("KISS driver for AX.25 over TTYs");
943 MODULE_PARM(ax25_maxdev, "i");
944 MODULE_PARM_DESC(ax25_maxdev, "number of MKISS devices");
945 MODULE_LICENSE("GPL");
946 MODULE_ALIAS_LDISC(N_AX25);
947 module_init(mkiss_init_driver);
948 module_exit(mkiss_exit_driver);