2 * Apple Onboard Audio driver -- layout fabric
4 * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
6 * GPL v2, can be found in COPYING.
9 * This fabric module looks for sound codecs
10 * based on the layout-id property in the device tree.
15 #include <linux/list.h>
16 #include <linux/module.h>
18 #include "../soundbus/soundbus.h"
20 MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
21 MODULE_LICENSE("GPL");
22 MODULE_DESCRIPTION("Layout-ID fabric for snd-aoa");
24 #define MAX_CODECS_PER_BUS 2
26 /* These are the connections the layout fabric
27 * knows about. It doesn't really care about the
28 * input ones, but I thought I'd separate them
29 * to give them proper names. The thing is that
30 * Apple usually will distinguish the active output
31 * by GPIOs, while the active input is set directly
32 * on the codec. Hence we here tell the codec what
33 * we think is connected. This information is hard-
35 #define CC_SPEAKERS (1<<0)
36 #define CC_HEADPHONE (1<<1)
37 #define CC_LINEOUT (1<<2)
38 #define CC_DIGITALOUT (1<<3)
39 #define CC_LINEIN (1<<4)
40 #define CC_MICROPHONE (1<<5)
41 #define CC_DIGITALIN (1<<6)
42 /* pretty bogus but users complain...
43 * This is a flag saying that the LINEOUT
44 * should be renamed to HEADPHONE.
45 * be careful with input detection! */
46 #define CC_LINEOUT_LABELLED_HEADPHONE (1<<7)
48 struct codec_connection {
49 /* CC_ flags from above */
51 /* codec dependent bit to be set in the aoa_codec.connected field.
52 * This intentionally doesn't have any generic flags because the
53 * fabric has to know the codec anyway and all codecs might have
54 * different connectors */
58 struct codec_connect_info {
60 struct codec_connection *connections;
63 #define LAYOUT_FLAG_COMBO_LINEOUT_SPDIF (1<<0)
66 unsigned int layout_id;
67 struct codec_connect_info codecs[MAX_CODECS_PER_BUS];
70 /* if busname is not assigned, we use 'Master' below,
71 * so that our layout table doesn't need to be filled
73 * We only assign these two if we expect to find more
74 * than one soundbus, i.e. on those machines with
75 * multiple layout-ids */
80 MODULE_ALIAS("sound-layout-36");
81 MODULE_ALIAS("sound-layout-41");
82 MODULE_ALIAS("sound-layout-45");
83 MODULE_ALIAS("sound-layout-47");
84 MODULE_ALIAS("sound-layout-48");
85 MODULE_ALIAS("sound-layout-49");
86 MODULE_ALIAS("sound-layout-50");
87 MODULE_ALIAS("sound-layout-51");
88 MODULE_ALIAS("sound-layout-56");
89 MODULE_ALIAS("sound-layout-57");
90 MODULE_ALIAS("sound-layout-58");
91 MODULE_ALIAS("sound-layout-60");
92 MODULE_ALIAS("sound-layout-61");
93 MODULE_ALIAS("sound-layout-62");
94 MODULE_ALIAS("sound-layout-64");
95 MODULE_ALIAS("sound-layout-65");
96 MODULE_ALIAS("sound-layout-66");
97 MODULE_ALIAS("sound-layout-67");
98 MODULE_ALIAS("sound-layout-68");
99 MODULE_ALIAS("sound-layout-69");
100 MODULE_ALIAS("sound-layout-70");
101 MODULE_ALIAS("sound-layout-72");
102 MODULE_ALIAS("sound-layout-76");
103 MODULE_ALIAS("sound-layout-80");
104 MODULE_ALIAS("sound-layout-82");
105 MODULE_ALIAS("sound-layout-84");
106 MODULE_ALIAS("sound-layout-86");
107 MODULE_ALIAS("sound-layout-90");
108 MODULE_ALIAS("sound-layout-92");
109 MODULE_ALIAS("sound-layout-94");
110 MODULE_ALIAS("sound-layout-96");
111 MODULE_ALIAS("sound-layout-98");
112 MODULE_ALIAS("sound-layout-100");
114 /* onyx with all but microphone connected */
115 static struct codec_connection onyx_connections_nomic[] = {
117 .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
121 .connected = CC_DIGITALOUT,
125 .connected = CC_LINEIN,
128 {} /* terminate array by .connected == 0 */
131 /* onyx on machines without headphone */
132 static struct codec_connection onyx_connections_noheadphones[] = {
134 .connected = CC_SPEAKERS | CC_LINEOUT |
135 CC_LINEOUT_LABELLED_HEADPHONE,
139 .connected = CC_DIGITALOUT,
142 /* FIXME: are these correct? probably not for all the machines
143 * below ... If not this will need separating. */
145 .connected = CC_LINEIN,
149 .connected = CC_MICROPHONE,
152 {} /* terminate array by .connected == 0 */
155 /* onyx on machines with real line-out */
156 static struct codec_connection onyx_connections_reallineout[] = {
158 .connected = CC_SPEAKERS | CC_LINEOUT | CC_HEADPHONE,
162 .connected = CC_DIGITALOUT,
166 .connected = CC_LINEIN,
169 {} /* terminate array by .connected == 0 */
172 /* tas on machines without line out */
173 static struct codec_connection tas_connections_nolineout[] = {
175 .connected = CC_SPEAKERS | CC_HEADPHONE,
179 .connected = CC_LINEIN,
183 .connected = CC_MICROPHONE,
186 {} /* terminate array by .connected == 0 */
189 /* tas on machines with neither line out nor line in */
190 static struct codec_connection tas_connections_noline[] = {
192 .connected = CC_SPEAKERS | CC_HEADPHONE,
196 .connected = CC_MICROPHONE,
199 {} /* terminate array by .connected == 0 */
202 /* tas on machines without microphone */
203 static struct codec_connection tas_connections_nomic[] = {
205 .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
209 .connected = CC_LINEIN,
212 {} /* terminate array by .connected == 0 */
215 /* tas on machines with everything connected */
216 static struct codec_connection tas_connections_all[] = {
218 .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
222 .connected = CC_LINEIN,
226 .connected = CC_MICROPHONE,
229 {} /* terminate array by .connected == 0 */
232 static struct codec_connection toonie_connections[] = {
234 .connected = CC_SPEAKERS | CC_HEADPHONE,
237 {} /* terminate array by .connected == 0 */
240 static struct codec_connection topaz_input[] = {
242 .connected = CC_DIGITALIN,
245 {} /* terminate array by .connected == 0 */
248 static struct codec_connection topaz_output[] = {
250 .connected = CC_DIGITALOUT,
253 {} /* terminate array by .connected == 0 */
256 static struct codec_connection topaz_inout[] = {
258 .connected = CC_DIGITALIN,
262 .connected = CC_DIGITALOUT,
265 {} /* terminate array by .connected == 0 */
268 static struct layout layouts[] = {
269 /* last PowerBooks (15" Oct 2005) */
271 .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
274 .connections = onyx_connections_noheadphones,
278 .connections = topaz_input,
285 .connections = onyx_connections_reallineout,
292 .connections = topaz_input,
297 .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
300 .connections = onyx_connections_noheadphones,
307 .connections = topaz_input,
310 /* PowerBook5,9 [17" Oct 2005] */
312 .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
315 .connections = onyx_connections_noheadphones,
319 .connections = topaz_input,
326 .connections = onyx_connections_noheadphones,
330 .connections = topaz_input,
333 /* Quad PowerMac (analog in, analog/digital out) */
337 .connections = onyx_connections_nomic,
340 /* Quad PowerMac (digital in) */
344 .connections = topaz_input,
346 .busname = "digital in", .pcmid = 1 },
347 /* Early 2005 PowerBook (PowerBook 5,6) */
351 .connections = tas_connections_nolineout,
358 .connections = tas_connections_nolineout,
365 .connections = tas_connections_noline,
372 .connections = tas_connections_nolineout,
379 .connections = onyx_connections_nomic,
383 .connections = topaz_input,
390 .connections = tas_connections_nolineout,
393 /* PowerMac10,1 (Mac Mini) */
397 .connections = toonie_connections,
404 .connections = onyx_connections_noheadphones,
407 /* unknown, untested, but this comes from Apple */
411 .connections = tas_connections_all,
417 .connections = tas_connections_nomic,
421 .connections = topaz_inout,
427 .connections = onyx_connections_noheadphones,
433 .connections = topaz_input,
439 .connections = onyx_connections_nomic,
445 .connections = topaz_input,
451 .connections = onyx_connections_noheadphones,
457 .connections = topaz_input,
463 .connections = onyx_connections_noheadphones,
467 .connections = topaz_output,
473 .connections = onyx_connections_noheadphones,
479 .connections = topaz_input,
485 .connections = tas_connections_nomic,
489 .connections = topaz_inout,
495 .connections = tas_connections_noline,
501 /* but it has an external mic?? how to select? */
502 .connections = onyx_connections_noheadphones,
508 .connections = toonie_connections,
514 .connections = topaz_input,
518 .connections = onyx_connections_noheadphones,
524 static struct layout *find_layout_by_id(unsigned int id)
529 while (l->layout_id) {
530 if (l->layout_id == id)
537 static void use_layout(struct layout *l)
541 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
542 if (l->codecs[i].name) {
543 request_module("snd-aoa-codec-%s", l->codecs[i].name);
546 /* now we wait for the codecs to call us back */
551 struct layout_dev_ptr {
552 struct layout_dev *ptr;
556 struct list_head list;
557 struct soundbus_dev *sdev;
558 struct device_node *sound;
559 struct aoa_codec *codecs[MAX_CODECS_PER_BUS];
560 struct layout *layout;
561 struct gpio_runtime gpio;
563 /* we need these for headphone/lineout detection */
564 struct snd_kcontrol *headphone_ctrl;
565 struct snd_kcontrol *lineout_ctrl;
566 struct snd_kcontrol *speaker_ctrl;
567 struct snd_kcontrol *headphone_detected_ctrl;
568 struct snd_kcontrol *lineout_detected_ctrl;
570 struct layout_dev_ptr selfptr_headphone;
571 struct layout_dev_ptr selfptr_lineout;
573 u32 have_lineout_detect:1,
574 have_headphone_detect:1,
575 switch_on_headphone:1,
579 static LIST_HEAD(layouts_list);
580 static int layouts_list_items;
581 /* this can go away but only if we allow multiple cards,
582 * make the fabric handle all the card stuff, etc... */
583 static struct layout_dev *layout_device;
585 static int control_info(struct snd_kcontrol *kcontrol,
586 struct snd_ctl_elem_info *uinfo)
588 uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
590 uinfo->value.integer.min = 0;
591 uinfo->value.integer.max = 1;
595 #define AMP_CONTROL(n, description) \
596 static int n##_control_get(struct snd_kcontrol *kcontrol, \
597 struct snd_ctl_elem_value *ucontrol) \
599 struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \
600 if (gpio->methods && gpio->methods->get_##n) \
601 ucontrol->value.integer.value[0] = \
602 gpio->methods->get_##n(gpio); \
605 static int n##_control_put(struct snd_kcontrol *kcontrol, \
606 struct snd_ctl_elem_value *ucontrol) \
608 struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \
609 if (gpio->methods && gpio->methods->get_##n) \
610 gpio->methods->set_##n(gpio, \
611 ucontrol->value.integer.value[0]); \
614 static struct snd_kcontrol_new n##_ctl = { \
615 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
616 .name = description, \
617 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
618 .info = control_info, \
619 .get = n##_control_get, \
620 .put = n##_control_put, \
623 AMP_CONTROL(headphone, "Headphone Switch");
624 AMP_CONTROL(speakers, "Speakers Switch");
625 AMP_CONTROL(lineout, "Line-Out Switch");
627 static int detect_choice_get(struct snd_kcontrol *kcontrol,
628 struct snd_ctl_elem_value *ucontrol)
630 struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
632 switch (kcontrol->private_value) {
634 ucontrol->value.integer.value[0] = ldev->switch_on_headphone;
637 ucontrol->value.integer.value[0] = ldev->switch_on_lineout;
645 static int detect_choice_put(struct snd_kcontrol *kcontrol,
646 struct snd_ctl_elem_value *ucontrol)
648 struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
650 switch (kcontrol->private_value) {
652 ldev->switch_on_headphone = !!ucontrol->value.integer.value[0];
655 ldev->switch_on_lineout = !!ucontrol->value.integer.value[0];
663 static struct snd_kcontrol_new headphone_detect_choice = {
664 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
665 .name = "Headphone Detect Autoswitch",
666 .info = control_info,
667 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
668 .get = detect_choice_get,
669 .put = detect_choice_put,
673 static struct snd_kcontrol_new lineout_detect_choice = {
674 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
675 .name = "Line-Out Detect Autoswitch",
676 .info = control_info,
677 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
678 .get = detect_choice_get,
679 .put = detect_choice_put,
683 static int detected_get(struct snd_kcontrol *kcontrol,
684 struct snd_ctl_elem_value *ucontrol)
686 struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
689 switch (kcontrol->private_value) {
691 v = ldev->gpio.methods->get_detect(&ldev->gpio,
692 AOA_NOTIFY_HEADPHONE);
695 v = ldev->gpio.methods->get_detect(&ldev->gpio,
696 AOA_NOTIFY_LINE_OUT);
701 ucontrol->value.integer.value[0] = v;
705 static struct snd_kcontrol_new headphone_detected = {
706 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
707 .name = "Headphone Detected",
708 .info = control_info,
709 .access = SNDRV_CTL_ELEM_ACCESS_READ,
714 static struct snd_kcontrol_new lineout_detected = {
715 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
716 .name = "Line-Out Detected",
717 .info = control_info,
718 .access = SNDRV_CTL_ELEM_ACCESS_READ,
723 static int check_codec(struct aoa_codec *codec,
724 struct layout_dev *ldev,
725 struct codec_connect_info *cci)
729 struct codec_connection *cc;
731 /* if the codec has a 'codec' node, we require a reference */
732 if (codec->node && (strcmp(codec->node->name, "codec") == 0)) {
733 snprintf(propname, sizeof(propname),
734 "platform-%s-codec-ref", codec->name);
735 ref = (u32*)get_property(ldev->sound, propname, NULL);
737 printk(KERN_INFO "snd-aoa-fabric-layout: "
738 "required property %s not present\n", propname);
741 if (*ref != codec->node->linux_phandle) {
742 printk(KERN_INFO "snd-aoa-fabric-layout: "
743 "%s doesn't match!\n", propname);
747 if (layouts_list_items != 1) {
748 printk(KERN_INFO "snd-aoa-fabric-layout: "
749 "more than one soundbus, but no references.\n");
753 codec->soundbus_dev = ldev->sdev;
754 codec->gpio = &ldev->gpio;
756 cc = cci->connections;
760 printk(KERN_INFO "snd-aoa-fabric-layout: can use this codec\n");
762 codec->connected = 0;
763 codec->fabric_data = cc;
765 while (cc->connected) {
766 codec->connected |= 1<<cc->codec_bit;
773 static int layout_found_codec(struct aoa_codec *codec)
775 struct layout_dev *ldev;
778 list_for_each_entry(ldev, &layouts_list, list) {
779 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
780 if (!ldev->layout->codecs[i].name)
782 if (strcmp(ldev->layout->codecs[i].name, codec->name) == 0) {
783 if (check_codec(codec,
785 &ldev->layout->codecs[i]) == 0)
793 static void layout_remove_codec(struct aoa_codec *codec)
796 /* here remove the codec from the layout dev's
799 codec->soundbus_dev = NULL;
801 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
805 static void layout_notify(void *data)
807 struct layout_dev_ptr *dptr = data;
808 struct layout_dev *ldev;
810 struct snd_kcontrol *detected, *c;
811 struct snd_card *card = aoa_get_card();
814 if (data == &ldev->selfptr_headphone) {
815 v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_HEADPHONE);
816 detected = ldev->headphone_detected_ctrl;
817 update = ldev->switch_on_headphone;
819 ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
820 ldev->gpio.methods->set_headphone(&ldev->gpio, v);
821 ldev->gpio.methods->set_lineout(&ldev->gpio, 0);
823 } else if (data == &ldev->selfptr_lineout) {
824 v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_LINE_OUT);
825 detected = ldev->lineout_detected_ctrl;
826 update = ldev->switch_on_lineout;
828 ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
829 ldev->gpio.methods->set_headphone(&ldev->gpio, 0);
830 ldev->gpio.methods->set_lineout(&ldev->gpio, v);
836 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &detected->id);
838 c = ldev->headphone_ctrl;
840 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
841 c = ldev->speaker_ctrl;
843 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
844 c = ldev->lineout_ctrl;
846 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
850 static void layout_attached_codec(struct aoa_codec *codec)
852 struct codec_connection *cc;
853 struct snd_kcontrol *ctl;
854 int headphones, lineout;
855 struct layout_dev *ldev = layout_device;
857 /* need to add this codec to our codec array! */
859 cc = codec->fabric_data;
861 headphones = codec->gpio->methods->get_detect(codec->gpio,
862 AOA_NOTIFY_HEADPHONE);
863 lineout = codec->gpio->methods->get_detect(codec->gpio,
864 AOA_NOTIFY_LINE_OUT);
866 while (cc->connected) {
867 if (cc->connected & CC_SPEAKERS) {
868 if (headphones <= 0 && lineout <= 0)
869 ldev->gpio.methods->set_speakers(codec->gpio, 1);
870 ctl = snd_ctl_new1(&speakers_ctl, codec->gpio);
871 ldev->speaker_ctrl = ctl;
872 aoa_snd_ctl_add(ctl);
874 if (cc->connected & CC_HEADPHONE) {
876 ldev->gpio.methods->set_headphone(codec->gpio, 1);
877 ctl = snd_ctl_new1(&headphone_ctl, codec->gpio);
878 ldev->headphone_ctrl = ctl;
879 aoa_snd_ctl_add(ctl);
880 ldev->have_headphone_detect =
882 ->set_notify(&ldev->gpio,
883 AOA_NOTIFY_HEADPHONE,
885 &ldev->selfptr_headphone);
886 if (ldev->have_headphone_detect) {
887 ctl = snd_ctl_new1(&headphone_detect_choice,
889 aoa_snd_ctl_add(ctl);
890 ctl = snd_ctl_new1(&headphone_detected,
892 ldev->headphone_detected_ctrl = ctl;
893 aoa_snd_ctl_add(ctl);
896 if (cc->connected & CC_LINEOUT) {
898 ldev->gpio.methods->set_lineout(codec->gpio, 1);
899 ctl = snd_ctl_new1(&lineout_ctl, codec->gpio);
900 if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
901 strlcpy(ctl->id.name,
902 "Headphone Switch", sizeof(ctl->id.name));
903 ldev->lineout_ctrl = ctl;
904 aoa_snd_ctl_add(ctl);
905 ldev->have_lineout_detect =
907 ->set_notify(&ldev->gpio,
910 &ldev->selfptr_lineout);
911 if (ldev->have_lineout_detect) {
912 ctl = snd_ctl_new1(&lineout_detect_choice,
914 if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
915 strlcpy(ctl->id.name,
916 "Headphone Detect Autoswitch",
917 sizeof(ctl->id.name));
918 aoa_snd_ctl_add(ctl);
919 ctl = snd_ctl_new1(&lineout_detected,
921 if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
922 strlcpy(ctl->id.name,
923 "Headphone Detected",
924 sizeof(ctl->id.name));
925 ldev->lineout_detected_ctrl = ctl;
926 aoa_snd_ctl_add(ctl);
931 /* now update initial state */
932 if (ldev->have_headphone_detect)
933 layout_notify(&ldev->selfptr_headphone);
934 if (ldev->have_lineout_detect)
935 layout_notify(&ldev->selfptr_lineout);
938 static struct aoa_fabric layout_fabric = {
939 .name = "SoundByLayout",
940 .owner = THIS_MODULE,
941 .found_codec = layout_found_codec,
942 .remove_codec = layout_remove_codec,
943 .attached_codec = layout_attached_codec,
946 static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
948 struct device_node *sound = NULL;
949 unsigned int *layout_id;
950 struct layout *layout;
951 struct layout_dev *ldev = NULL;
954 /* hm, currently we can only have one ... */
958 /* by breaking out we keep a reference */
959 while ((sound = of_get_next_child(sdev->ofdev.node, sound))) {
960 if (sound->type && strcasecmp(sound->type, "soundchip") == 0)
963 if (!sound) return -ENODEV;
965 layout_id = (unsigned int *) get_property(sound, "layout-id", NULL);
968 printk(KERN_INFO "snd-aoa-fabric-layout: found bus with layout %d\n",
971 layout = find_layout_by_id(*layout_id);
973 printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n");
977 ldev = kzalloc(sizeof(struct layout_dev), GFP_KERNEL);
981 layout_device = ldev;
984 ldev->layout = layout;
985 ldev->gpio.node = sound->parent;
986 switch (layout->layout_id) {
987 case 41: /* that unknown machine no one seems to have */
988 case 51: /* PowerBook5,4 */
989 case 58: /* Mac Mini */
990 ldev->gpio.methods = ftr_gpio_methods;
992 "snd-aoa-fabric-layout: Using direct GPIOs\n");
995 ldev->gpio.methods = pmf_gpio_methods;
997 "snd-aoa-fabric-layout: Using PMF GPIOs\n");
999 ldev->selfptr_headphone.ptr = ldev;
1000 ldev->selfptr_lineout.ptr = ldev;
1001 sdev->ofdev.dev.driver_data = ldev;
1002 list_add(&ldev->list, &layouts_list);
1003 layouts_list_items++;
1005 /* assign these before registering ourselves, so
1006 * callbacks that are done during registration
1007 * already have the values */
1008 sdev->pcmid = ldev->layout->pcmid;
1009 if (ldev->layout->busname) {
1010 sdev->pcmname = ldev->layout->busname;
1012 sdev->pcmname = "Master";
1015 ldev->gpio.methods->init(&ldev->gpio);
1017 err = aoa_fabric_register(&layout_fabric, &sdev->ofdev.dev);
1018 if (err && err != -EALREADY) {
1019 printk(KERN_INFO "snd-aoa-fabric-layout: can't use,"
1020 " another fabric is active!\n");
1025 ldev->switch_on_headphone = 1;
1026 ldev->switch_on_lineout = 1;
1029 /* we won't be using these then... */
1030 ldev->gpio.methods->exit(&ldev->gpio);
1031 /* reset if we didn't use it */
1032 sdev->pcmname = NULL;
1034 list_del(&ldev->list);
1035 layouts_list_items--;
1038 layout_device = NULL;
1043 static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
1045 struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
1048 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
1049 if (ldev->codecs[i]) {
1050 aoa_fabric_unlink_codec(ldev->codecs[i]);
1052 ldev->codecs[i] = NULL;
1054 list_del(&ldev->list);
1055 layouts_list_items--;
1056 of_node_put(ldev->sound);
1058 ldev->gpio.methods->set_notify(&ldev->gpio,
1059 AOA_NOTIFY_HEADPHONE,
1062 ldev->gpio.methods->set_notify(&ldev->gpio,
1063 AOA_NOTIFY_LINE_OUT,
1067 ldev->gpio.methods->exit(&ldev->gpio);
1068 layout_device = NULL;
1071 sdev->pcmname = NULL;
1076 static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t state)
1078 struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
1080 if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
1081 ldev->gpio.methods->all_amps_off(&ldev->gpio);
1086 static int aoa_fabric_layout_resume(struct soundbus_dev *sdev)
1088 struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
1090 if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
1091 ldev->gpio.methods->all_amps_restore(&ldev->gpio);
1097 static struct soundbus_driver aoa_soundbus_driver = {
1098 .name = "snd_aoa_soundbus_drv",
1099 .owner = THIS_MODULE,
1100 .probe = aoa_fabric_layout_probe,
1101 .remove = aoa_fabric_layout_remove,
1103 .suspend = aoa_fabric_layout_suspend,
1104 .resume = aoa_fabric_layout_resume,
1107 .owner = THIS_MODULE,
1111 static int __init aoa_fabric_layout_init(void)
1115 err = soundbus_register_driver(&aoa_soundbus_driver);
1121 static void __exit aoa_fabric_layout_exit(void)
1123 soundbus_unregister_driver(&aoa_soundbus_driver);
1124 aoa_fabric_unregister(&layout_fabric);
1127 module_init(aoa_fabric_layout_init);
1128 module_exit(aoa_fabric_layout_exit);