2 * Kernel execution entry point code.
4 * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
5 * Initial PowerPC version.
6 * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
8 * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
9 * Low-level exception handers, MMU support, and rewrite.
10 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
11 * PowerPC 8xx modifications.
12 * Copyright (c) 1998-1999 TiVo, Inc.
13 * PowerPC 403GCX modifications.
14 * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
15 * PowerPC 403GCX/405GP modifications.
16 * Copyright 2000 MontaVista Software Inc.
17 * PPC405 modifications
18 * PowerPC 403GCX/405GP modifications.
19 * Author: MontaVista Software, Inc.
20 * frank_rowand@mvista.com or source@mvista.com
21 * debbie_chu@mvista.com
22 * Copyright 2002-2005 MontaVista Software, Inc.
23 * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
25 * This program is free software; you can redistribute it and/or modify it
26 * under the terms of the GNU General Public License as published by the
27 * Free Software Foundation; either version 2 of the License, or (at your
28 * option) any later version.
31 #include <asm/processor.h>
34 #include <asm/pgtable.h>
35 #include <asm/cputable.h>
36 #include <asm/thread_info.h>
37 #include <asm/ppc_asm.h>
38 #include <asm/asm-offsets.h>
39 #include "head_booke.h"
42 /* As with the other PowerPC ports, it is expected that when code
43 * execution begins here, the following registers contain valid, yet
44 * optional, information:
46 * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
47 * r4 - Starting address of the init RAM disk
48 * r5 - Ending address of the init RAM disk
49 * r6 - Start of kernel command line string (e.g. "mem=128")
50 * r7 - End of kernel command line string
57 * Reserve a word at a fixed location to store the address
62 * Save parameters we are passed
69 li r24,0 /* CPU number */
72 * Set up the initial MMU state
74 * We are still executing code at the virtual address
75 * mappings set by the firmware for the base of RAM.
77 * We first invalidate all TLB entries but the one
78 * we are running from. We then load the KERNELBASE
79 * mappings so we can begin to use kernel addresses
80 * natively and so the interrupt vector locations are
81 * permanently pinned (necessary since Book E
82 * implementations always have translation enabled).
84 * TODO: Use the known TLB entry we are running from to
85 * determine which physical region we are located
86 * in. This can be used to determine where in RAM
87 * (on a shared CPU system) or PCI memory space
88 * (on a DRAMless system) we are located.
89 * For now, we assume a perfect world which means
90 * we are located at the base of DRAM (physical 0).
94 * Search TLB for entry that we are currently using.
95 * Invalidate all entries but the one we are using.
97 /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
98 mfspr r3,SPRN_PID /* Get PID */
99 mfmsr r4 /* Get MSR */
100 andi. r4,r4,MSR_IS@l /* TS=1? */
101 beq wmmucr /* If not, leave STS=0 */
102 oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
103 wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
106 bl invstr /* Find our address */
107 invstr: mflr r5 /* Make it accessible */
108 tlbsx r23,0,r5 /* Find entry we are in */
109 li r4,0 /* Start at TLB entry 0 */
110 li r3,0 /* Set PAGEID inval value */
111 1: cmpw r23,r4 /* Is this our entry? */
112 beq skpinv /* If so, skip the inval */
113 tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
114 skpinv: addi r4,r4,1 /* Increment */
115 cmpwi r4,64 /* Are we done? */
116 bne 1b /* If not, repeat */
117 isync /* If so, context change */
120 * Configure and load pinned entry into TLB slot 63.
124 ori r3,r3,PAGE_OFFSET@l
126 /* Kernel is at the base of RAM */
127 li r4, 0 /* Load the kernel physical address */
129 /* Load the kernel PID = 0 */
134 /* Initialize MMUCR */
140 clrrwi r3,r3,10 /* Mask off the effective page number */
141 ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
144 clrrwi r4,r4,10 /* Mask off the real page number */
145 /* ERPN is 0 for first 4GB page */
148 /* Added guarded bit to protect against speculative loads/stores */
150 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
152 li r0,63 /* TLB slot 63 */
154 tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
155 tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
156 tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
158 /* Force context change */
167 /* If necessary, invalidate original entry we used */
171 tlbwe r6,r23,PPC44x_TLB_PAGEID
175 #ifdef CONFIG_PPC_EARLY_DEBUG_44x
176 /* Add UART mapping for early debug. */
179 lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
180 ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
183 lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
184 ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
187 li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
188 li r0,62 /* TLB slot 0 */
190 tlbwe r3,r0,PPC44x_TLB_PAGEID
191 tlbwe r4,r0,PPC44x_TLB_XLAT
192 tlbwe r5,r0,PPC44x_TLB_ATTRIB
194 /* Force context change */
196 #endif /* CONFIG_PPC_EARLY_DEBUG_44x */
198 /* Establish the interrupt vector offsets */
199 SET_IVOR(0, CriticalInput);
200 SET_IVOR(1, MachineCheck);
201 SET_IVOR(2, DataStorage);
202 SET_IVOR(3, InstructionStorage);
203 SET_IVOR(4, ExternalInput);
204 SET_IVOR(5, Alignment);
205 SET_IVOR(6, Program);
206 SET_IVOR(7, FloatingPointUnavailable);
207 SET_IVOR(8, SystemCall);
208 SET_IVOR(9, AuxillaryProcessorUnavailable);
209 SET_IVOR(10, Decrementer);
210 SET_IVOR(11, FixedIntervalTimer);
211 SET_IVOR(12, WatchdogTimer);
212 SET_IVOR(13, DataTLBError);
213 SET_IVOR(14, InstructionTLBError);
216 /* Establish the interrupt vector base */
217 lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
221 /* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
231 * This is where the main kernel code starts.
236 ori r2,r2,init_task@l
238 /* ptr to current thread */
239 addi r4,r2,THREAD /* init task's THREAD */
243 lis r1,init_thread_union@h
244 ori r1,r1,init_thread_union@l
246 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
251 * Decide what sort of machine this is and initialize the MMU.
261 /* Setup PTE pointers for the Abatron bdiGDB */
262 lis r6, swapper_pg_dir@h
263 ori r6, r6, swapper_pg_dir@l
264 lis r5, abatron_pteptrs@h
265 ori r5, r5, abatron_pteptrs@l
267 ori r4, r4, KERNELBASE@l
268 stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */
272 lis r4,start_kernel@h
273 ori r4,r4,start_kernel@l
275 ori r3,r3,MSR_KERNEL@l
278 rfi /* change context and jump to start_kernel */
281 * Interrupt vector entry code
283 * The Book E MMUs are always on so we don't need to handle
284 * interrupts in real mode as with previous PPC processors. In
285 * this case we handle interrupts in the kernel virtual address
288 * Interrupt vectors are dynamically placed relative to the
289 * interrupt prefix as determined by the address of interrupt_base.
290 * The interrupt vectors offsets are programmed using the labels
291 * for each interrupt vector entry.
293 * Interrupt vectors must be aligned on a 16 byte boundary.
294 * We align on a 32 byte cache line boundary for good measure.
298 /* Critical Input Interrupt */
299 CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
301 /* Machine Check Interrupt */
303 MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
305 CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
308 /* Data Storage Interrupt */
309 START_EXCEPTION(DataStorage)
310 mtspr SPRN_SPRG0, r10 /* Save some working registers */
311 mtspr SPRN_SPRG1, r11
312 mtspr SPRN_SPRG4W, r12
313 mtspr SPRN_SPRG5W, r13
315 mtspr SPRN_SPRG7W, r11
318 * Check if it was a store fault, if not then bail
319 * because a user tried to access a kernel or
320 * read-protected page. Otherwise, get the
321 * offending address and handle it.
324 andis. r10, r10, ESR_ST@h
327 mfspr r10, SPRN_DEAR /* Get faulting address */
329 /* If we are faulting a kernel address, we have to use the
330 * kernel page tables.
335 lis r11, swapper_pg_dir@h
336 ori r11, r11, swapper_pg_dir@l
339 rlwinm r12,r12,0,0,23 /* Clear TID */
343 /* Get the PGD for the current thread */
348 /* Load PID into MMUCR TID */
349 mfspr r12,SPRN_MMUCR /* Get MMUCR */
350 mfspr r13,SPRN_PID /* Get PID */
351 rlwimi r12,r13,0,24,31 /* Set TID */
356 rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
357 lwzx r11, r12, r11 /* Get pgd/pmd entry */
358 rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
359 beq 2f /* Bail if no table */
361 rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
362 lwz r11, 4(r12) /* Get pte entry */
364 andi. r13, r11, _PAGE_RW /* Is it writeable? */
365 beq 2f /* Bail if not */
369 ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
370 stw r11, 4(r12) /* Update Linux page table */
372 li r13, PPC44x_TLB_SR@l /* Set SR */
373 rlwimi r13, r11, 29, 29, 29 /* SX = _PAGE_HWEXEC */
374 rlwimi r13, r11, 0, 30, 30 /* SW = _PAGE_RW */
375 rlwimi r13, r11, 29, 28, 28 /* UR = _PAGE_USER */
376 rlwimi r12, r11, 31, 26, 26 /* (_PAGE_USER>>1)->r12 */
377 rlwimi r12, r11, 29, 30, 30 /* (_PAGE_USER>>3)->r12 */
378 and r12, r12, r11 /* HWEXEC/RW & USER */
379 rlwimi r13, r12, 0, 26, 26 /* UX = HWEXEC & USER */
380 rlwimi r13, r12, 3, 27, 27 /* UW = RW & USER */
382 rlwimi r11,r13,0,26,31 /* Insert static perms */
384 rlwinm r11,r11,0,20,15 /* Clear U0-U3 */
386 /* find the TLB index that caused the fault. It has to be here. */
389 tlbwe r11, r10, PPC44x_TLB_ATTRIB /* Write ATTRIB */
391 /* Done...restore registers and get out of here.
393 mfspr r11, SPRN_SPRG7R
395 mfspr r13, SPRN_SPRG5R
396 mfspr r12, SPRN_SPRG4R
398 mfspr r11, SPRN_SPRG1
399 mfspr r10, SPRN_SPRG0
400 rfi /* Force context change */
404 * The bailout. Restore registers to pre-exception conditions
405 * and call the heavyweights to help us out.
407 mfspr r11, SPRN_SPRG7R
409 mfspr r13, SPRN_SPRG5R
410 mfspr r12, SPRN_SPRG4R
412 mfspr r11, SPRN_SPRG1
413 mfspr r10, SPRN_SPRG0
416 /* Instruction Storage Interrupt */
417 INSTRUCTION_STORAGE_EXCEPTION
419 /* External Input Interrupt */
420 EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
422 /* Alignment Interrupt */
425 /* Program Interrupt */
428 /* Floating Point Unavailable Interrupt */
429 #ifdef CONFIG_PPC_FPU
430 FP_UNAVAILABLE_EXCEPTION
432 EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
435 /* System Call Interrupt */
436 START_EXCEPTION(SystemCall)
437 NORMAL_EXCEPTION_PROLOG
438 EXC_XFER_EE_LITE(0x0c00, DoSyscall)
440 /* Auxillary Processor Unavailable Interrupt */
441 EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
443 /* Decrementer Interrupt */
444 DECREMENTER_EXCEPTION
446 /* Fixed Internal Timer Interrupt */
447 /* TODO: Add FIT support */
448 EXCEPTION(0x1010, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
450 /* Watchdog Timer Interrupt */
451 /* TODO: Add watchdog support */
452 #ifdef CONFIG_BOOKE_WDT
453 CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
455 CRITICAL_EXCEPTION(0x1020, WatchdogTimer, unknown_exception)
458 /* Data TLB Error Interrupt */
459 START_EXCEPTION(DataTLBError)
460 mtspr SPRN_SPRG0, r10 /* Save some working registers */
461 mtspr SPRN_SPRG1, r11
462 mtspr SPRN_SPRG4W, r12
463 mtspr SPRN_SPRG5W, r13
465 mtspr SPRN_SPRG7W, r11
466 mfspr r10, SPRN_DEAR /* Get faulting address */
468 /* If we are faulting a kernel address, we have to use the
469 * kernel page tables.
474 lis r11, swapper_pg_dir@h
475 ori r11, r11, swapper_pg_dir@l
478 rlwinm r12,r12,0,0,23 /* Clear TID */
482 /* Get the PGD for the current thread */
487 /* Load PID into MMUCR TID */
489 mfspr r13,SPRN_PID /* Get PID */
490 rlwimi r12,r13,0,24,31 /* Set TID */
495 rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
496 lwzx r11, r12, r11 /* Get pgd/pmd entry */
497 rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
498 beq 2f /* Bail if no table */
500 rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
501 lwz r11, 4(r12) /* Get pte entry */
502 andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
503 beq 2f /* Bail if not present */
505 ori r11, r11, _PAGE_ACCESSED
508 /* Jump to common tlb load */
512 /* The bailout. Restore registers to pre-exception conditions
513 * and call the heavyweights to help us out.
515 mfspr r11, SPRN_SPRG7R
517 mfspr r13, SPRN_SPRG5R
518 mfspr r12, SPRN_SPRG4R
519 mfspr r11, SPRN_SPRG1
520 mfspr r10, SPRN_SPRG0
523 /* Instruction TLB Error Interrupt */
525 * Nearly the same as above, except we get our
526 * information from different registers and bailout
527 * to a different point.
529 START_EXCEPTION(InstructionTLBError)
530 mtspr SPRN_SPRG0, r10 /* Save some working registers */
531 mtspr SPRN_SPRG1, r11
532 mtspr SPRN_SPRG4W, r12
533 mtspr SPRN_SPRG5W, r13
535 mtspr SPRN_SPRG7W, r11
536 mfspr r10, SPRN_SRR0 /* Get faulting address */
538 /* If we are faulting a kernel address, we have to use the
539 * kernel page tables.
544 lis r11, swapper_pg_dir@h
545 ori r11, r11, swapper_pg_dir@l
548 rlwinm r12,r12,0,0,23 /* Clear TID */
552 /* Get the PGD for the current thread */
557 /* Load PID into MMUCR TID */
559 mfspr r13,SPRN_PID /* Get PID */
560 rlwimi r12,r13,0,24,31 /* Set TID */
565 rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
566 lwzx r11, r12, r11 /* Get pgd/pmd entry */
567 rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
568 beq 2f /* Bail if no table */
570 rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
571 lwz r11, 4(r12) /* Get pte entry */
572 andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
573 beq 2f /* Bail if not present */
575 ori r11, r11, _PAGE_ACCESSED
578 /* Jump to common TLB load point */
582 /* The bailout. Restore registers to pre-exception conditions
583 * and call the heavyweights to help us out.
585 mfspr r11, SPRN_SPRG7R
587 mfspr r13, SPRN_SPRG5R
588 mfspr r12, SPRN_SPRG4R
589 mfspr r11, SPRN_SPRG1
590 mfspr r10, SPRN_SPRG0
593 /* Debug Interrupt */
600 * Data TLB exceptions will bail out to this point
601 * if they can't resolve the lightweight TLB fault.
604 NORMAL_EXCEPTION_PROLOG
605 mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
607 mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
608 EXC_XFER_EE_LITE(0x0300, handle_page_fault)
612 * Both the instruction and data TLB miss get to this
613 * point to load the TLB.
615 * r11 - available to use
616 * r12 - Pointer to the 64-bit PTE
617 * r13 - available to use
618 * MMUCR - loaded with proper value when we get here
619 * Upon exit, we reload everything and RFI.
623 * We set execute, because we don't have the granularity to
624 * properly set this at the page level (Linux problem).
625 * If shared is set, we cause a zero PID->TID load.
626 * Many of these bits are software only. Bits we don't set
627 * here we (properly should) assume have the appropriate value.
630 /* Load the next available TLB index */
631 lis r13, tlb_44x_index@ha
632 lwz r13, tlb_44x_index@l(r13)
633 /* Load the TLB high watermark */
634 lis r11, tlb_44x_hwater@ha
635 lwz r11, tlb_44x_hwater@l(r11)
637 /* Increment, rollover, and store TLB index */
639 cmpw 0, r13, r11 /* reserve entries */
643 /* Store the next available TLB index */
644 lis r11, tlb_44x_index@ha
645 stw r13, tlb_44x_index@l(r11)
647 lwz r11, 0(r12) /* Get MS word of PTE */
648 lwz r12, 4(r12) /* Get LS word of PTE */
649 rlwimi r11, r12, 0, 0 , 19 /* Insert RPN */
650 tlbwe r11, r13, PPC44x_TLB_XLAT /* Write XLAT */
653 * Create PAGEID. This is the faulting address,
654 * page size, and valid flag.
656 li r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
657 rlwimi r10, r11, 0, 20, 31 /* Insert valid and page size */
658 tlbwe r10, r13, PPC44x_TLB_PAGEID /* Write PAGEID */
660 li r10, PPC44x_TLB_SR@l /* Set SR */
661 rlwimi r10, r12, 0, 30, 30 /* Set SW = _PAGE_RW */
662 rlwimi r10, r12, 29, 29, 29 /* SX = _PAGE_HWEXEC */
663 rlwimi r10, r12, 29, 28, 28 /* UR = _PAGE_USER */
664 rlwimi r11, r12, 31, 26, 26 /* (_PAGE_USER>>1)->r12 */
665 and r11, r12, r11 /* HWEXEC & USER */
666 rlwimi r10, r11, 0, 26, 26 /* UX = HWEXEC & USER */
668 rlwimi r12, r10, 0, 26, 31 /* Insert static perms */
669 rlwinm r12, r12, 0, 20, 15 /* Clear U0-U3 */
670 tlbwe r12, r13, PPC44x_TLB_ATTRIB /* Write ATTRIB */
672 /* Done...restore registers and get out of here.
674 mfspr r11, SPRN_SPRG7R
676 mfspr r13, SPRN_SPRG5R
677 mfspr r12, SPRN_SPRG4R
678 mfspr r11, SPRN_SPRG1
679 mfspr r10, SPRN_SPRG0
680 rfi /* Force context change */
687 * extern void giveup_altivec(struct task_struct *prev)
689 * The 44x core does not have an AltiVec unit.
691 _GLOBAL(giveup_altivec)
695 * extern void giveup_fpu(struct task_struct *prev)
697 * The 44x core does not have an FPU.
699 #ifndef CONFIG_PPC_FPU
706 #ifdef CONFIG_BDI_SWITCH
707 /* Context switch the PTE pointer for the Abatron BDI2000.
708 * The PGDIR is the second parameter.
710 lis r5, abatron_pteptrs@h
711 ori r5, r5, abatron_pteptrs@l
715 isync /* Force context change */
719 * We put a few things here that have to be page-aligned. This stuff
720 * goes at the beginning of the data segment, which is page-aligned.
726 .globl empty_zero_page
731 * To support >32-bit physical addresses, we use an 8KB pgdir.
733 .globl swapper_pg_dir
737 /* Reserved 4k for the critical exception stack & 4k for the machine
738 * check stack per CPU for kernel mode exceptions */
741 exception_stack_bottom:
742 .space BOOKE_EXCEPTION_STACK_SIZE
743 .globl exception_stack_top
747 * This space gets a copy of optional info passed to us by the bootstrap
748 * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
755 * Room for two PTE pointers, usually the kernel and current user pointers
756 * to their respective root page table.