[ARM] dma: don't touch cache on dma_*_for_cpu()
[linux-2.6] / arch / arm / mach-at91 / at91sam9263_devices.c
1 /*
2  * arch/arm/mach-at91/at91sam9263_devices.c
3  *
4  *  Copyright (C) 2007 Atmel Corporation.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  */
12 #include <asm/mach/arch.h>
13 #include <asm/mach/map.h>
14
15 #include <linux/dma-mapping.h>
16 #include <linux/platform_device.h>
17 #include <linux/i2c-gpio.h>
18
19 #include <linux/fb.h>
20 #include <video/atmel_lcdc.h>
21
22 #include <mach/board.h>
23 #include <mach/gpio.h>
24 #include <mach/at91sam9263.h>
25 #include <mach/at91sam9263_matrix.h>
26 #include <mach/at91sam9_smc.h>
27
28 #include "generic.h"
29
30
31 /* --------------------------------------------------------------------
32  *  USB Host
33  * -------------------------------------------------------------------- */
34
35 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
36 static u64 ohci_dmamask = DMA_BIT_MASK(32);
37 static struct at91_usbh_data usbh_data;
38
39 static struct resource usbh_resources[] = {
40         [0] = {
41                 .start  = AT91SAM9263_UHP_BASE,
42                 .end    = AT91SAM9263_UHP_BASE + SZ_1M - 1,
43                 .flags  = IORESOURCE_MEM,
44         },
45         [1] = {
46                 .start  = AT91SAM9263_ID_UHP,
47                 .end    = AT91SAM9263_ID_UHP,
48                 .flags  = IORESOURCE_IRQ,
49         },
50 };
51
52 static struct platform_device at91_usbh_device = {
53         .name           = "at91_ohci",
54         .id             = -1,
55         .dev            = {
56                                 .dma_mask               = &ohci_dmamask,
57                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
58                                 .platform_data          = &usbh_data,
59         },
60         .resource       = usbh_resources,
61         .num_resources  = ARRAY_SIZE(usbh_resources),
62 };
63
64 void __init at91_add_device_usbh(struct at91_usbh_data *data)
65 {
66         int i;
67
68         if (!data)
69                 return;
70
71         /* Enable VBus control for UHP ports */
72         for (i = 0; i < data->ports; i++) {
73                 if (data->vbus_pin[i])
74                         at91_set_gpio_output(data->vbus_pin[i], 0);
75         }
76
77         usbh_data = *data;
78         platform_device_register(&at91_usbh_device);
79 }
80 #else
81 void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
82 #endif
83
84
85 /* --------------------------------------------------------------------
86  *  USB Device (Gadget)
87  * -------------------------------------------------------------------- */
88
89 #ifdef CONFIG_USB_GADGET_AT91
90 static struct at91_udc_data udc_data;
91
92 static struct resource udc_resources[] = {
93         [0] = {
94                 .start  = AT91SAM9263_BASE_UDP,
95                 .end    = AT91SAM9263_BASE_UDP + SZ_16K - 1,
96                 .flags  = IORESOURCE_MEM,
97         },
98         [1] = {
99                 .start  = AT91SAM9263_ID_UDP,
100                 .end    = AT91SAM9263_ID_UDP,
101                 .flags  = IORESOURCE_IRQ,
102         },
103 };
104
105 static struct platform_device at91_udc_device = {
106         .name           = "at91_udc",
107         .id             = -1,
108         .dev            = {
109                                 .platform_data          = &udc_data,
110         },
111         .resource       = udc_resources,
112         .num_resources  = ARRAY_SIZE(udc_resources),
113 };
114
115 void __init at91_add_device_udc(struct at91_udc_data *data)
116 {
117         if (!data)
118                 return;
119
120         if (data->vbus_pin) {
121                 at91_set_gpio_input(data->vbus_pin, 0);
122                 at91_set_deglitch(data->vbus_pin, 1);
123         }
124
125         /* Pullup pin is handled internally by USB device peripheral */
126
127         udc_data = *data;
128         platform_device_register(&at91_udc_device);
129 }
130 #else
131 void __init at91_add_device_udc(struct at91_udc_data *data) {}
132 #endif
133
134
135 /* --------------------------------------------------------------------
136  *  Ethernet
137  * -------------------------------------------------------------------- */
138
139 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
140 static u64 eth_dmamask = DMA_BIT_MASK(32);
141 static struct at91_eth_data eth_data;
142
143 static struct resource eth_resources[] = {
144         [0] = {
145                 .start  = AT91SAM9263_BASE_EMAC,
146                 .end    = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
147                 .flags  = IORESOURCE_MEM,
148         },
149         [1] = {
150                 .start  = AT91SAM9263_ID_EMAC,
151                 .end    = AT91SAM9263_ID_EMAC,
152                 .flags  = IORESOURCE_IRQ,
153         },
154 };
155
156 static struct platform_device at91sam9263_eth_device = {
157         .name           = "macb",
158         .id             = -1,
159         .dev            = {
160                                 .dma_mask               = &eth_dmamask,
161                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
162                                 .platform_data          = &eth_data,
163         },
164         .resource       = eth_resources,
165         .num_resources  = ARRAY_SIZE(eth_resources),
166 };
167
168 void __init at91_add_device_eth(struct at91_eth_data *data)
169 {
170         if (!data)
171                 return;
172
173         if (data->phy_irq_pin) {
174                 at91_set_gpio_input(data->phy_irq_pin, 0);
175                 at91_set_deglitch(data->phy_irq_pin, 1);
176         }
177
178         /* Pins used for MII and RMII */
179         at91_set_A_periph(AT91_PIN_PE21, 0);    /* ETXCK_EREFCK */
180         at91_set_B_periph(AT91_PIN_PC25, 0);    /* ERXDV */
181         at91_set_A_periph(AT91_PIN_PE25, 0);    /* ERX0 */
182         at91_set_A_periph(AT91_PIN_PE26, 0);    /* ERX1 */
183         at91_set_A_periph(AT91_PIN_PE27, 0);    /* ERXER */
184         at91_set_A_periph(AT91_PIN_PE28, 0);    /* ETXEN */
185         at91_set_A_periph(AT91_PIN_PE23, 0);    /* ETX0 */
186         at91_set_A_periph(AT91_PIN_PE24, 0);    /* ETX1 */
187         at91_set_A_periph(AT91_PIN_PE30, 0);    /* EMDIO */
188         at91_set_A_periph(AT91_PIN_PE29, 0);    /* EMDC */
189
190         if (!data->is_rmii) {
191                 at91_set_A_periph(AT91_PIN_PE22, 0);    /* ECRS */
192                 at91_set_B_periph(AT91_PIN_PC26, 0);    /* ECOL */
193                 at91_set_B_periph(AT91_PIN_PC22, 0);    /* ERX2 */
194                 at91_set_B_periph(AT91_PIN_PC23, 0);    /* ERX3 */
195                 at91_set_B_periph(AT91_PIN_PC27, 0);    /* ERXCK */
196                 at91_set_B_periph(AT91_PIN_PC20, 0);    /* ETX2 */
197                 at91_set_B_periph(AT91_PIN_PC21, 0);    /* ETX3 */
198                 at91_set_B_periph(AT91_PIN_PC24, 0);    /* ETXER */
199         }
200
201         eth_data = *data;
202         platform_device_register(&at91sam9263_eth_device);
203 }
204 #else
205 void __init at91_add_device_eth(struct at91_eth_data *data) {}
206 #endif
207
208
209 /* --------------------------------------------------------------------
210  *  MMC / SD
211  * -------------------------------------------------------------------- */
212
213 #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
214 static u64 mmc_dmamask = DMA_BIT_MASK(32);
215 static struct at91_mmc_data mmc0_data, mmc1_data;
216
217 static struct resource mmc0_resources[] = {
218         [0] = {
219                 .start  = AT91SAM9263_BASE_MCI0,
220                 .end    = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
221                 .flags  = IORESOURCE_MEM,
222         },
223         [1] = {
224                 .start  = AT91SAM9263_ID_MCI0,
225                 .end    = AT91SAM9263_ID_MCI0,
226                 .flags  = IORESOURCE_IRQ,
227         },
228 };
229
230 static struct platform_device at91sam9263_mmc0_device = {
231         .name           = "at91_mci",
232         .id             = 0,
233         .dev            = {
234                                 .dma_mask               = &mmc_dmamask,
235                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
236                                 .platform_data          = &mmc0_data,
237         },
238         .resource       = mmc0_resources,
239         .num_resources  = ARRAY_SIZE(mmc0_resources),
240 };
241
242 static struct resource mmc1_resources[] = {
243         [0] = {
244                 .start  = AT91SAM9263_BASE_MCI1,
245                 .end    = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
246                 .flags  = IORESOURCE_MEM,
247         },
248         [1] = {
249                 .start  = AT91SAM9263_ID_MCI1,
250                 .end    = AT91SAM9263_ID_MCI1,
251                 .flags  = IORESOURCE_IRQ,
252         },
253 };
254
255 static struct platform_device at91sam9263_mmc1_device = {
256         .name           = "at91_mci",
257         .id             = 1,
258         .dev            = {
259                                 .dma_mask               = &mmc_dmamask,
260                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
261                                 .platform_data          = &mmc1_data,
262         },
263         .resource       = mmc1_resources,
264         .num_resources  = ARRAY_SIZE(mmc1_resources),
265 };
266
267 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
268 {
269         if (!data)
270                 return;
271
272         /* input/irq */
273         if (data->det_pin) {
274                 at91_set_gpio_input(data->det_pin, 1);
275                 at91_set_deglitch(data->det_pin, 1);
276         }
277         if (data->wp_pin)
278                 at91_set_gpio_input(data->wp_pin, 1);
279         if (data->vcc_pin)
280                 at91_set_gpio_output(data->vcc_pin, 0);
281
282         if (mmc_id == 0) {              /* MCI0 */
283                 /* CLK */
284                 at91_set_A_periph(AT91_PIN_PA12, 0);
285
286                 if (data->slot_b) {
287                         /* CMD */
288                         at91_set_A_periph(AT91_PIN_PA16, 1);
289
290                         /* DAT0, maybe DAT1..DAT3 */
291                         at91_set_A_periph(AT91_PIN_PA17, 1);
292                         if (data->wire4) {
293                                 at91_set_A_periph(AT91_PIN_PA18, 1);
294                                 at91_set_A_periph(AT91_PIN_PA19, 1);
295                                 at91_set_A_periph(AT91_PIN_PA20, 1);
296                         }
297                 } else {
298                         /* CMD */
299                         at91_set_A_periph(AT91_PIN_PA1, 1);
300
301                         /* DAT0, maybe DAT1..DAT3 */
302                         at91_set_A_periph(AT91_PIN_PA0, 1);
303                         if (data->wire4) {
304                                 at91_set_A_periph(AT91_PIN_PA3, 1);
305                                 at91_set_A_periph(AT91_PIN_PA4, 1);
306                                 at91_set_A_periph(AT91_PIN_PA5, 1);
307                         }
308                 }
309
310                 mmc0_data = *data;
311                 at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk");
312                 platform_device_register(&at91sam9263_mmc0_device);
313         } else {                        /* MCI1 */
314                 /* CLK */
315                 at91_set_A_periph(AT91_PIN_PA6, 0);
316
317                 if (data->slot_b) {
318                         /* CMD */
319                         at91_set_A_periph(AT91_PIN_PA21, 1);
320
321                         /* DAT0, maybe DAT1..DAT3 */
322                         at91_set_A_periph(AT91_PIN_PA22, 1);
323                         if (data->wire4) {
324                                 at91_set_A_periph(AT91_PIN_PA23, 1);
325                                 at91_set_A_periph(AT91_PIN_PA24, 1);
326                                 at91_set_A_periph(AT91_PIN_PA25, 1);
327                         }
328                 } else {
329                         /* CMD */
330                         at91_set_A_periph(AT91_PIN_PA7, 1);
331
332                         /* DAT0, maybe DAT1..DAT3 */
333                         at91_set_A_periph(AT91_PIN_PA8, 1);
334                         if (data->wire4) {
335                                 at91_set_A_periph(AT91_PIN_PA9, 1);
336                                 at91_set_A_periph(AT91_PIN_PA10, 1);
337                                 at91_set_A_periph(AT91_PIN_PA11, 1);
338                         }
339                 }
340
341                 mmc1_data = *data;
342                 at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
343                 platform_device_register(&at91sam9263_mmc1_device);
344         }
345 }
346 #else
347 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
348 #endif
349
350
351 /* --------------------------------------------------------------------
352  *  NAND / SmartMedia
353  * -------------------------------------------------------------------- */
354
355 #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
356 static struct atmel_nand_data nand_data;
357
358 #define NAND_BASE       AT91_CHIPSELECT_3
359
360 static struct resource nand_resources[] = {
361         [0] = {
362                 .start  = NAND_BASE,
363                 .end    = NAND_BASE + SZ_256M - 1,
364                 .flags  = IORESOURCE_MEM,
365         },
366         [1] = {
367                 .start  = AT91_BASE_SYS + AT91_ECC0,
368                 .end    = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
369                 .flags  = IORESOURCE_MEM,
370         }
371 };
372
373 static struct platform_device at91sam9263_nand_device = {
374         .name           = "atmel_nand",
375         .id             = -1,
376         .dev            = {
377                                 .platform_data  = &nand_data,
378         },
379         .resource       = nand_resources,
380         .num_resources  = ARRAY_SIZE(nand_resources),
381 };
382
383 void __init at91_add_device_nand(struct atmel_nand_data *data)
384 {
385         unsigned long csa, mode;
386
387         if (!data)
388                 return;
389
390         csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
391         at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
392
393         /* set the bus interface characteristics */
394         at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
395                         | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
396
397         at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
398                         | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
399
400         at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
401
402         if (data->bus_width_16)
403                 mode = AT91_SMC_DBW_16;
404         else
405                 mode = AT91_SMC_DBW_8;
406         at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
407
408         /* enable pin */
409         if (data->enable_pin)
410                 at91_set_gpio_output(data->enable_pin, 1);
411
412         /* ready/busy pin */
413         if (data->rdy_pin)
414                 at91_set_gpio_input(data->rdy_pin, 1);
415
416         /* card detect pin */
417         if (data->det_pin)
418                 at91_set_gpio_input(data->det_pin, 1);
419
420         nand_data = *data;
421         platform_device_register(&at91sam9263_nand_device);
422 }
423 #else
424 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
425 #endif
426
427
428 /* --------------------------------------------------------------------
429  *  TWI (i2c)
430  * -------------------------------------------------------------------- */
431
432 /*
433  * Prefer the GPIO code since the TWI controller isn't robust
434  * (gets overruns and underruns under load) and can only issue
435  * repeated STARTs in one scenario (the driver doesn't yet handle them).
436  */
437 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
438
439 static struct i2c_gpio_platform_data pdata = {
440         .sda_pin                = AT91_PIN_PB4,
441         .sda_is_open_drain      = 1,
442         .scl_pin                = AT91_PIN_PB5,
443         .scl_is_open_drain      = 1,
444         .udelay                 = 2,            /* ~100 kHz */
445 };
446
447 static struct platform_device at91sam9263_twi_device = {
448         .name                   = "i2c-gpio",
449         .id                     = -1,
450         .dev.platform_data      = &pdata,
451 };
452
453 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
454 {
455         at91_set_GPIO_periph(AT91_PIN_PB4, 1);          /* TWD (SDA) */
456         at91_set_multi_drive(AT91_PIN_PB4, 1);
457
458         at91_set_GPIO_periph(AT91_PIN_PB5, 1);          /* TWCK (SCL) */
459         at91_set_multi_drive(AT91_PIN_PB5, 1);
460
461         i2c_register_board_info(0, devices, nr_devices);
462         platform_device_register(&at91sam9263_twi_device);
463 }
464
465 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
466
467 static struct resource twi_resources[] = {
468         [0] = {
469                 .start  = AT91SAM9263_BASE_TWI,
470                 .end    = AT91SAM9263_BASE_TWI + SZ_16K - 1,
471                 .flags  = IORESOURCE_MEM,
472         },
473         [1] = {
474                 .start  = AT91SAM9263_ID_TWI,
475                 .end    = AT91SAM9263_ID_TWI,
476                 .flags  = IORESOURCE_IRQ,
477         },
478 };
479
480 static struct platform_device at91sam9263_twi_device = {
481         .name           = "at91_i2c",
482         .id             = -1,
483         .resource       = twi_resources,
484         .num_resources  = ARRAY_SIZE(twi_resources),
485 };
486
487 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
488 {
489         /* pins used for TWI interface */
490         at91_set_A_periph(AT91_PIN_PB4, 0);             /* TWD */
491         at91_set_multi_drive(AT91_PIN_PB4, 1);
492
493         at91_set_A_periph(AT91_PIN_PB5, 0);             /* TWCK */
494         at91_set_multi_drive(AT91_PIN_PB5, 1);
495
496         i2c_register_board_info(0, devices, nr_devices);
497         platform_device_register(&at91sam9263_twi_device);
498 }
499 #else
500 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
501 #endif
502
503
504 /* --------------------------------------------------------------------
505  *  SPI
506  * -------------------------------------------------------------------- */
507
508 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
509 static u64 spi_dmamask = DMA_BIT_MASK(32);
510
511 static struct resource spi0_resources[] = {
512         [0] = {
513                 .start  = AT91SAM9263_BASE_SPI0,
514                 .end    = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
515                 .flags  = IORESOURCE_MEM,
516         },
517         [1] = {
518                 .start  = AT91SAM9263_ID_SPI0,
519                 .end    = AT91SAM9263_ID_SPI0,
520                 .flags  = IORESOURCE_IRQ,
521         },
522 };
523
524 static struct platform_device at91sam9263_spi0_device = {
525         .name           = "atmel_spi",
526         .id             = 0,
527         .dev            = {
528                                 .dma_mask               = &spi_dmamask,
529                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
530         },
531         .resource       = spi0_resources,
532         .num_resources  = ARRAY_SIZE(spi0_resources),
533 };
534
535 static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
536
537 static struct resource spi1_resources[] = {
538         [0] = {
539                 .start  = AT91SAM9263_BASE_SPI1,
540                 .end    = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
541                 .flags  = IORESOURCE_MEM,
542         },
543         [1] = {
544                 .start  = AT91SAM9263_ID_SPI1,
545                 .end    = AT91SAM9263_ID_SPI1,
546                 .flags  = IORESOURCE_IRQ,
547         },
548 };
549
550 static struct platform_device at91sam9263_spi1_device = {
551         .name           = "atmel_spi",
552         .id             = 1,
553         .dev            = {
554                                 .dma_mask               = &spi_dmamask,
555                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
556         },
557         .resource       = spi1_resources,
558         .num_resources  = ARRAY_SIZE(spi1_resources),
559 };
560
561 static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
562
563 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
564 {
565         int i;
566         unsigned long cs_pin;
567         short enable_spi0 = 0;
568         short enable_spi1 = 0;
569
570         /* Choose SPI chip-selects */
571         for (i = 0; i < nr_devices; i++) {
572                 if (devices[i].controller_data)
573                         cs_pin = (unsigned long) devices[i].controller_data;
574                 else if (devices[i].bus_num == 0)
575                         cs_pin = spi0_standard_cs[devices[i].chip_select];
576                 else
577                         cs_pin = spi1_standard_cs[devices[i].chip_select];
578
579                 if (devices[i].bus_num == 0)
580                         enable_spi0 = 1;
581                 else
582                         enable_spi1 = 1;
583
584                 /* enable chip-select pin */
585                 at91_set_gpio_output(cs_pin, 1);
586
587                 /* pass chip-select pin to driver */
588                 devices[i].controller_data = (void *) cs_pin;
589         }
590
591         spi_register_board_info(devices, nr_devices);
592
593         /* Configure SPI bus(es) */
594         if (enable_spi0) {
595                 at91_set_B_periph(AT91_PIN_PA0, 0);     /* SPI0_MISO */
596                 at91_set_B_periph(AT91_PIN_PA1, 0);     /* SPI0_MOSI */
597                 at91_set_B_periph(AT91_PIN_PA2, 0);     /* SPI0_SPCK */
598
599                 at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
600                 platform_device_register(&at91sam9263_spi0_device);
601         }
602         if (enable_spi1) {
603                 at91_set_A_periph(AT91_PIN_PB12, 0);    /* SPI1_MISO */
604                 at91_set_A_periph(AT91_PIN_PB13, 0);    /* SPI1_MOSI */
605                 at91_set_A_periph(AT91_PIN_PB14, 0);    /* SPI1_SPCK */
606
607                 at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
608                 platform_device_register(&at91sam9263_spi1_device);
609         }
610 }
611 #else
612 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
613 #endif
614
615
616 /* --------------------------------------------------------------------
617  *  AC97
618  * -------------------------------------------------------------------- */
619
620 #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
621 static u64 ac97_dmamask = DMA_BIT_MASK(32);
622 static struct atmel_ac97_data ac97_data;
623
624 static struct resource ac97_resources[] = {
625         [0] = {
626                 .start  = AT91SAM9263_BASE_AC97C,
627                 .end    = AT91SAM9263_BASE_AC97C + SZ_16K - 1,
628                 .flags  = IORESOURCE_MEM,
629         },
630         [1] = {
631                 .start  = AT91SAM9263_ID_AC97C,
632                 .end    = AT91SAM9263_ID_AC97C,
633                 .flags  = IORESOURCE_IRQ,
634         },
635 };
636
637 static struct platform_device at91sam9263_ac97_device = {
638         .name           = "ac97c",
639         .id             = 1,
640         .dev            = {
641                                 .dma_mask               = &ac97_dmamask,
642                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
643                                 .platform_data          = &ac97_data,
644         },
645         .resource       = ac97_resources,
646         .num_resources  = ARRAY_SIZE(ac97_resources),
647 };
648
649 void __init at91_add_device_ac97(struct atmel_ac97_data *data)
650 {
651         if (!data)
652                 return;
653
654         at91_set_A_periph(AT91_PIN_PB0, 0);     /* AC97FS */
655         at91_set_A_periph(AT91_PIN_PB1, 0);     /* AC97CK */
656         at91_set_A_periph(AT91_PIN_PB2, 0);     /* AC97TX */
657         at91_set_A_periph(AT91_PIN_PB3, 0);     /* AC97RX */
658
659         /* reset */
660         if (data->reset_pin)
661                 at91_set_gpio_output(data->reset_pin, 0);
662
663         ac97_data = *ek_data;
664         platform_device_register(&at91sam9263_ac97_device);
665 }
666 #else
667 void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
668 #endif
669
670
671 /* --------------------------------------------------------------------
672  *  LCD Controller
673  * -------------------------------------------------------------------- */
674
675 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
676 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
677 static struct atmel_lcdfb_info lcdc_data;
678
679 static struct resource lcdc_resources[] = {
680         [0] = {
681                 .start  = AT91SAM9263_LCDC_BASE,
682                 .end    = AT91SAM9263_LCDC_BASE + SZ_4K - 1,
683                 .flags  = IORESOURCE_MEM,
684         },
685         [1] = {
686                 .start  = AT91SAM9263_ID_LCDC,
687                 .end    = AT91SAM9263_ID_LCDC,
688                 .flags  = IORESOURCE_IRQ,
689         },
690 };
691
692 static struct platform_device at91_lcdc_device = {
693         .name           = "atmel_lcdfb",
694         .id             = 0,
695         .dev            = {
696                                 .dma_mask               = &lcdc_dmamask,
697                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
698                                 .platform_data          = &lcdc_data,
699         },
700         .resource       = lcdc_resources,
701         .num_resources  = ARRAY_SIZE(lcdc_resources),
702 };
703
704 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
705 {
706         if (!data)
707                 return;
708
709         at91_set_A_periph(AT91_PIN_PC1, 0);     /* LCDHSYNC */
710         at91_set_A_periph(AT91_PIN_PC2, 0);     /* LCDDOTCK */
711         at91_set_A_periph(AT91_PIN_PC3, 0);     /* LCDDEN */
712         at91_set_B_periph(AT91_PIN_PB9, 0);     /* LCDCC */
713         at91_set_A_periph(AT91_PIN_PC6, 0);     /* LCDD2 */
714         at91_set_A_periph(AT91_PIN_PC7, 0);     /* LCDD3 */
715         at91_set_A_periph(AT91_PIN_PC8, 0);     /* LCDD4 */
716         at91_set_A_periph(AT91_PIN_PC9, 0);     /* LCDD5 */
717         at91_set_A_periph(AT91_PIN_PC10, 0);    /* LCDD6 */
718         at91_set_A_periph(AT91_PIN_PC11, 0);    /* LCDD7 */
719         at91_set_A_periph(AT91_PIN_PC14, 0);    /* LCDD10 */
720         at91_set_A_periph(AT91_PIN_PC15, 0);    /* LCDD11 */
721         at91_set_A_periph(AT91_PIN_PC16, 0);    /* LCDD12 */
722         at91_set_B_periph(AT91_PIN_PC12, 0);    /* LCDD13 */
723         at91_set_A_periph(AT91_PIN_PC18, 0);    /* LCDD14 */
724         at91_set_A_periph(AT91_PIN_PC19, 0);    /* LCDD15 */
725         at91_set_A_periph(AT91_PIN_PC22, 0);    /* LCDD18 */
726         at91_set_A_periph(AT91_PIN_PC23, 0);    /* LCDD19 */
727         at91_set_A_periph(AT91_PIN_PC24, 0);    /* LCDD20 */
728         at91_set_B_periph(AT91_PIN_PC17, 0);    /* LCDD21 */
729         at91_set_A_periph(AT91_PIN_PC26, 0);    /* LCDD22 */
730         at91_set_A_periph(AT91_PIN_PC27, 0);    /* LCDD23 */
731
732         lcdc_data = *data;
733         platform_device_register(&at91_lcdc_device);
734 }
735 #else
736 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
737 #endif
738
739
740 /* --------------------------------------------------------------------
741  *  Image Sensor Interface
742  * -------------------------------------------------------------------- */
743
744 #if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
745
746 struct resource isi_resources[] = {
747         [0] = {
748                 .start  = AT91SAM9263_BASE_ISI,
749                 .end    = AT91SAM9263_BASE_ISI + SZ_16K - 1,
750                 .flags  = IORESOURCE_MEM,
751         },
752         [1] = {
753                 .start  = AT91SAM9263_ID_ISI,
754                 .end    = AT91SAM9263_ID_ISI,
755                 .flags  = IORESOURCE_IRQ,
756         },
757 };
758
759 static struct platform_device at91sam9263_isi_device = {
760         .name           = "at91_isi",
761         .id             = -1,
762         .resource       = isi_resources,
763         .num_resources  = ARRAY_SIZE(isi_resources),
764 };
765
766 void __init at91_add_device_isi(void)
767 {
768         at91_set_A_periph(AT91_PIN_PE0, 0);     /* ISI_D0 */
769         at91_set_A_periph(AT91_PIN_PE1, 0);     /* ISI_D1 */
770         at91_set_A_periph(AT91_PIN_PE2, 0);     /* ISI_D2 */
771         at91_set_A_periph(AT91_PIN_PE3, 0);     /* ISI_D3 */
772         at91_set_A_periph(AT91_PIN_PE4, 0);     /* ISI_D4 */
773         at91_set_A_periph(AT91_PIN_PE5, 0);     /* ISI_D5 */
774         at91_set_A_periph(AT91_PIN_PE6, 0);     /* ISI_D6 */
775         at91_set_A_periph(AT91_PIN_PE7, 0);     /* ISI_D7 */
776         at91_set_A_periph(AT91_PIN_PE8, 0);     /* ISI_PCK */
777         at91_set_A_periph(AT91_PIN_PE9, 0);     /* ISI_HSYNC */
778         at91_set_A_periph(AT91_PIN_PE10, 0);    /* ISI_VSYNC */
779         at91_set_B_periph(AT91_PIN_PE11, 0);    /* ISI_MCK (PCK3) */
780         at91_set_B_periph(AT91_PIN_PE12, 0);    /* ISI_PD8 */
781         at91_set_B_periph(AT91_PIN_PE13, 0);    /* ISI_PD9 */
782         at91_set_B_periph(AT91_PIN_PE14, 0);    /* ISI_PD10 */
783         at91_set_B_periph(AT91_PIN_PE15, 0);    /* ISI_PD11 */
784 }
785 #else
786 void __init at91_add_device_isi(void) {}
787 #endif
788
789
790 /* --------------------------------------------------------------------
791  *  Timer/Counter block
792  * -------------------------------------------------------------------- */
793
794 #ifdef CONFIG_ATMEL_TCLIB
795
796 static struct resource tcb_resources[] = {
797         [0] = {
798                 .start  = AT91SAM9263_BASE_TCB0,
799                 .end    = AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
800                 .flags  = IORESOURCE_MEM,
801         },
802         [1] = {
803                 .start  = AT91SAM9263_ID_TCB,
804                 .end    = AT91SAM9263_ID_TCB,
805                 .flags  = IORESOURCE_IRQ,
806         },
807 };
808
809 static struct platform_device at91sam9263_tcb_device = {
810         .name           = "atmel_tcb",
811         .id             = 0,
812         .resource       = tcb_resources,
813         .num_resources  = ARRAY_SIZE(tcb_resources),
814 };
815
816 static void __init at91_add_device_tc(void)
817 {
818         /* this chip has one clock and irq for all three TC channels */
819         at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
820         platform_device_register(&at91sam9263_tcb_device);
821 }
822 #else
823 static void __init at91_add_device_tc(void) { }
824 #endif
825
826
827 /* --------------------------------------------------------------------
828  *  RTT
829  * -------------------------------------------------------------------- */
830
831 static struct resource rtt0_resources[] = {
832         {
833                 .start  = AT91_BASE_SYS + AT91_RTT0,
834                 .end    = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
835                 .flags  = IORESOURCE_MEM,
836         }
837 };
838
839 static struct platform_device at91sam9263_rtt0_device = {
840         .name           = "at91_rtt",
841         .id             = 0,
842         .resource       = rtt0_resources,
843         .num_resources  = ARRAY_SIZE(rtt0_resources),
844 };
845
846 static struct resource rtt1_resources[] = {
847         {
848                 .start  = AT91_BASE_SYS + AT91_RTT1,
849                 .end    = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
850                 .flags  = IORESOURCE_MEM,
851         }
852 };
853
854 static struct platform_device at91sam9263_rtt1_device = {
855         .name           = "at91_rtt",
856         .id             = 1,
857         .resource       = rtt1_resources,
858         .num_resources  = ARRAY_SIZE(rtt1_resources),
859 };
860
861 static void __init at91_add_device_rtt(void)
862 {
863         platform_device_register(&at91sam9263_rtt0_device);
864         platform_device_register(&at91sam9263_rtt1_device);
865 }
866
867
868 /* --------------------------------------------------------------------
869  *  Watchdog
870  * -------------------------------------------------------------------- */
871
872 #if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
873 static struct platform_device at91sam9263_wdt_device = {
874         .name           = "at91_wdt",
875         .id             = -1,
876         .num_resources  = 0,
877 };
878
879 static void __init at91_add_device_watchdog(void)
880 {
881         platform_device_register(&at91sam9263_wdt_device);
882 }
883 #else
884 static void __init at91_add_device_watchdog(void) {}
885 #endif
886
887
888 /* --------------------------------------------------------------------
889  *  SSC -- Synchronous Serial Controller
890  * -------------------------------------------------------------------- */
891
892 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
893 static u64 ssc0_dmamask = DMA_BIT_MASK(32);
894
895 static struct resource ssc0_resources[] = {
896         [0] = {
897                 .start  = AT91SAM9263_BASE_SSC0,
898                 .end    = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
899                 .flags  = IORESOURCE_MEM,
900         },
901         [1] = {
902                 .start  = AT91SAM9263_ID_SSC0,
903                 .end    = AT91SAM9263_ID_SSC0,
904                 .flags  = IORESOURCE_IRQ,
905         },
906 };
907
908 static struct platform_device at91sam9263_ssc0_device = {
909         .name   = "ssc",
910         .id     = 0,
911         .dev    = {
912                 .dma_mask               = &ssc0_dmamask,
913                 .coherent_dma_mask      = DMA_BIT_MASK(32),
914         },
915         .resource       = ssc0_resources,
916         .num_resources  = ARRAY_SIZE(ssc0_resources),
917 };
918
919 static inline void configure_ssc0_pins(unsigned pins)
920 {
921         if (pins & ATMEL_SSC_TF)
922                 at91_set_B_periph(AT91_PIN_PB0, 1);
923         if (pins & ATMEL_SSC_TK)
924                 at91_set_B_periph(AT91_PIN_PB1, 1);
925         if (pins & ATMEL_SSC_TD)
926                 at91_set_B_periph(AT91_PIN_PB2, 1);
927         if (pins & ATMEL_SSC_RD)
928                 at91_set_B_periph(AT91_PIN_PB3, 1);
929         if (pins & ATMEL_SSC_RK)
930                 at91_set_B_periph(AT91_PIN_PB4, 1);
931         if (pins & ATMEL_SSC_RF)
932                 at91_set_B_periph(AT91_PIN_PB5, 1);
933 }
934
935 static u64 ssc1_dmamask = DMA_BIT_MASK(32);
936
937 static struct resource ssc1_resources[] = {
938         [0] = {
939                 .start  = AT91SAM9263_BASE_SSC1,
940                 .end    = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
941                 .flags  = IORESOURCE_MEM,
942         },
943         [1] = {
944                 .start  = AT91SAM9263_ID_SSC1,
945                 .end    = AT91SAM9263_ID_SSC1,
946                 .flags  = IORESOURCE_IRQ,
947         },
948 };
949
950 static struct platform_device at91sam9263_ssc1_device = {
951         .name   = "ssc",
952         .id     = 1,
953         .dev    = {
954                 .dma_mask               = &ssc1_dmamask,
955                 .coherent_dma_mask      = DMA_BIT_MASK(32),
956         },
957         .resource       = ssc1_resources,
958         .num_resources  = ARRAY_SIZE(ssc1_resources),
959 };
960
961 static inline void configure_ssc1_pins(unsigned pins)
962 {
963         if (pins & ATMEL_SSC_TF)
964                 at91_set_A_periph(AT91_PIN_PB6, 1);
965         if (pins & ATMEL_SSC_TK)
966                 at91_set_A_periph(AT91_PIN_PB7, 1);
967         if (pins & ATMEL_SSC_TD)
968                 at91_set_A_periph(AT91_PIN_PB8, 1);
969         if (pins & ATMEL_SSC_RD)
970                 at91_set_A_periph(AT91_PIN_PB9, 1);
971         if (pins & ATMEL_SSC_RK)
972                 at91_set_A_periph(AT91_PIN_PB10, 1);
973         if (pins & ATMEL_SSC_RF)
974                 at91_set_A_periph(AT91_PIN_PB11, 1);
975 }
976
977 /*
978  * SSC controllers are accessed through library code, instead of any
979  * kind of all-singing/all-dancing driver.  For example one could be
980  * used by a particular I2S audio codec's driver, while another one
981  * on the same system might be used by a custom data capture driver.
982  */
983 void __init at91_add_device_ssc(unsigned id, unsigned pins)
984 {
985         struct platform_device *pdev;
986
987         /*
988          * NOTE: caller is responsible for passing information matching
989          * "pins" to whatever will be using each particular controller.
990          */
991         switch (id) {
992         case AT91SAM9263_ID_SSC0:
993                 pdev = &at91sam9263_ssc0_device;
994                 configure_ssc0_pins(pins);
995                 at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
996                 break;
997         case AT91SAM9263_ID_SSC1:
998                 pdev = &at91sam9263_ssc1_device;
999                 configure_ssc1_pins(pins);
1000                 at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
1001                 break;
1002         default:
1003                 return;
1004         }
1005
1006         platform_device_register(pdev);
1007 }
1008
1009 #else
1010 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
1011 #endif
1012
1013
1014 /* --------------------------------------------------------------------
1015  *  UART
1016  * -------------------------------------------------------------------- */
1017
1018 #if defined(CONFIG_SERIAL_ATMEL)
1019
1020 static struct resource dbgu_resources[] = {
1021         [0] = {
1022                 .start  = AT91_VA_BASE_SYS + AT91_DBGU,
1023                 .end    = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
1024                 .flags  = IORESOURCE_MEM,
1025         },
1026         [1] = {
1027                 .start  = AT91_ID_SYS,
1028                 .end    = AT91_ID_SYS,
1029                 .flags  = IORESOURCE_IRQ,
1030         },
1031 };
1032
1033 static struct atmel_uart_data dbgu_data = {
1034         .use_dma_tx     = 0,
1035         .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
1036         .regs           = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
1037 };
1038
1039 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
1040
1041 static struct platform_device at91sam9263_dbgu_device = {
1042         .name           = "atmel_usart",
1043         .id             = 0,
1044         .dev            = {
1045                                 .dma_mask               = &dbgu_dmamask,
1046                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1047                                 .platform_data          = &dbgu_data,
1048         },
1049         .resource       = dbgu_resources,
1050         .num_resources  = ARRAY_SIZE(dbgu_resources),
1051 };
1052
1053 static inline void configure_dbgu_pins(void)
1054 {
1055         at91_set_A_periph(AT91_PIN_PC30, 0);            /* DRXD */
1056         at91_set_A_periph(AT91_PIN_PC31, 1);            /* DTXD */
1057 }
1058
1059 static struct resource uart0_resources[] = {
1060         [0] = {
1061                 .start  = AT91SAM9263_BASE_US0,
1062                 .end    = AT91SAM9263_BASE_US0 + SZ_16K - 1,
1063                 .flags  = IORESOURCE_MEM,
1064         },
1065         [1] = {
1066                 .start  = AT91SAM9263_ID_US0,
1067                 .end    = AT91SAM9263_ID_US0,
1068                 .flags  = IORESOURCE_IRQ,
1069         },
1070 };
1071
1072 static struct atmel_uart_data uart0_data = {
1073         .use_dma_tx     = 1,
1074         .use_dma_rx     = 1,
1075 };
1076
1077 static u64 uart0_dmamask = DMA_BIT_MASK(32);
1078
1079 static struct platform_device at91sam9263_uart0_device = {
1080         .name           = "atmel_usart",
1081         .id             = 1,
1082         .dev            = {
1083                                 .dma_mask               = &uart0_dmamask,
1084                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1085                                 .platform_data          = &uart0_data,
1086         },
1087         .resource       = uart0_resources,
1088         .num_resources  = ARRAY_SIZE(uart0_resources),
1089 };
1090
1091 static inline void configure_usart0_pins(unsigned pins)
1092 {
1093         at91_set_A_periph(AT91_PIN_PA26, 1);            /* TXD0 */
1094         at91_set_A_periph(AT91_PIN_PA27, 0);            /* RXD0 */
1095
1096         if (pins & ATMEL_UART_RTS)
1097                 at91_set_A_periph(AT91_PIN_PA28, 0);    /* RTS0 */
1098         if (pins & ATMEL_UART_CTS)
1099                 at91_set_A_periph(AT91_PIN_PA29, 0);    /* CTS0 */
1100 }
1101
1102 static struct resource uart1_resources[] = {
1103         [0] = {
1104                 .start  = AT91SAM9263_BASE_US1,
1105                 .end    = AT91SAM9263_BASE_US1 + SZ_16K - 1,
1106                 .flags  = IORESOURCE_MEM,
1107         },
1108         [1] = {
1109                 .start  = AT91SAM9263_ID_US1,
1110                 .end    = AT91SAM9263_ID_US1,
1111                 .flags  = IORESOURCE_IRQ,
1112         },
1113 };
1114
1115 static struct atmel_uart_data uart1_data = {
1116         .use_dma_tx     = 1,
1117         .use_dma_rx     = 1,
1118 };
1119
1120 static u64 uart1_dmamask = DMA_BIT_MASK(32);
1121
1122 static struct platform_device at91sam9263_uart1_device = {
1123         .name           = "atmel_usart",
1124         .id             = 2,
1125         .dev            = {
1126                                 .dma_mask               = &uart1_dmamask,
1127                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1128                                 .platform_data          = &uart1_data,
1129         },
1130         .resource       = uart1_resources,
1131         .num_resources  = ARRAY_SIZE(uart1_resources),
1132 };
1133
1134 static inline void configure_usart1_pins(unsigned pins)
1135 {
1136         at91_set_A_periph(AT91_PIN_PD0, 1);             /* TXD1 */
1137         at91_set_A_periph(AT91_PIN_PD1, 0);             /* RXD1 */
1138
1139         if (pins & ATMEL_UART_RTS)
1140                 at91_set_B_periph(AT91_PIN_PD7, 0);     /* RTS1 */
1141         if (pins & ATMEL_UART_CTS)
1142                 at91_set_B_periph(AT91_PIN_PD8, 0);     /* CTS1 */
1143 }
1144
1145 static struct resource uart2_resources[] = {
1146         [0] = {
1147                 .start  = AT91SAM9263_BASE_US2,
1148                 .end    = AT91SAM9263_BASE_US2 + SZ_16K - 1,
1149                 .flags  = IORESOURCE_MEM,
1150         },
1151         [1] = {
1152                 .start  = AT91SAM9263_ID_US2,
1153                 .end    = AT91SAM9263_ID_US2,
1154                 .flags  = IORESOURCE_IRQ,
1155         },
1156 };
1157
1158 static struct atmel_uart_data uart2_data = {
1159         .use_dma_tx     = 1,
1160         .use_dma_rx     = 1,
1161 };
1162
1163 static u64 uart2_dmamask = DMA_BIT_MASK(32);
1164
1165 static struct platform_device at91sam9263_uart2_device = {
1166         .name           = "atmel_usart",
1167         .id             = 3,
1168         .dev            = {
1169                                 .dma_mask               = &uart2_dmamask,
1170                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1171                                 .platform_data          = &uart2_data,
1172         },
1173         .resource       = uart2_resources,
1174         .num_resources  = ARRAY_SIZE(uart2_resources),
1175 };
1176
1177 static inline void configure_usart2_pins(unsigned pins)
1178 {
1179         at91_set_A_periph(AT91_PIN_PD2, 1);             /* TXD2 */
1180         at91_set_A_periph(AT91_PIN_PD3, 0);             /* RXD2 */
1181
1182         if (pins & ATMEL_UART_RTS)
1183                 at91_set_B_periph(AT91_PIN_PD5, 0);     /* RTS2 */
1184         if (pins & ATMEL_UART_CTS)
1185                 at91_set_B_periph(AT91_PIN_PD6, 0);     /* CTS2 */
1186 }
1187
1188 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
1189 struct platform_device *atmel_default_console_device;   /* the serial console device */
1190
1191 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1192 {
1193         struct platform_device *pdev;
1194
1195         switch (id) {
1196                 case 0:         /* DBGU */
1197                         pdev = &at91sam9263_dbgu_device;
1198                         configure_dbgu_pins();
1199                         at91_clock_associate("mck", &pdev->dev, "usart");
1200                         break;
1201                 case AT91SAM9263_ID_US0:
1202                         pdev = &at91sam9263_uart0_device;
1203                         configure_usart0_pins(pins);
1204                         at91_clock_associate("usart0_clk", &pdev->dev, "usart");
1205                         break;
1206                 case AT91SAM9263_ID_US1:
1207                         pdev = &at91sam9263_uart1_device;
1208                         configure_usart1_pins(pins);
1209                         at91_clock_associate("usart1_clk", &pdev->dev, "usart");
1210                         break;
1211                 case AT91SAM9263_ID_US2:
1212                         pdev = &at91sam9263_uart2_device;
1213                         configure_usart2_pins(pins);
1214                         at91_clock_associate("usart2_clk", &pdev->dev, "usart");
1215                         break;
1216                 default:
1217                         return;
1218         }
1219         pdev->id = portnr;              /* update to mapped ID */
1220
1221         if (portnr < ATMEL_MAX_UART)
1222                 at91_uarts[portnr] = pdev;
1223 }
1224
1225 void __init at91_set_serial_console(unsigned portnr)
1226 {
1227         if (portnr < ATMEL_MAX_UART)
1228                 atmel_default_console_device = at91_uarts[portnr];
1229 }
1230
1231 void __init at91_add_device_serial(void)
1232 {
1233         int i;
1234
1235         for (i = 0; i < ATMEL_MAX_UART; i++) {
1236                 if (at91_uarts[i])
1237                         platform_device_register(at91_uarts[i]);
1238         }
1239
1240         if (!atmel_default_console_device)
1241                 printk(KERN_INFO "AT91: No default serial console defined.\n");
1242 }
1243 #else
1244 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1245 void __init at91_set_serial_console(unsigned portnr) {}
1246 void __init at91_add_device_serial(void) {}
1247 #endif
1248
1249
1250 /* -------------------------------------------------------------------- */
1251 /*
1252  * These devices are always present and don't need any board-specific
1253  * setup.
1254  */
1255 static int __init at91_add_standard_devices(void)
1256 {
1257         at91_add_device_rtt();
1258         at91_add_device_watchdog();
1259         at91_add_device_tc();
1260         return 0;
1261 }
1262
1263 arch_initcall(at91_add_standard_devices);