git.oblomov.eu Git - linux-2.6/blob - drivers/usb/storage/shuttle_usbat.c

   1 /* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
   2  *
   3  * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $
   4  *
   5  * Current development and maintenance by:
   6  *   (c) 2000, 2001 Robert Baruch (autophile@starband.net)
   7  *   (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
   8  *
   9  * Developed with the assistance of:
  10  *   (c) 2002 Alan Stern <stern@rowland.org>
  11  *
  12  * Flash support based on earlier work by:
  13  *   (c) 2002 Thomas Kreiling <usbdev@sm04.de>
  14  *
  15  * Many originally ATAPI devices were slightly modified to meet the USB
  16  * market by using some kind of translation from ATAPI to USB on the host,
  17  * and the peripheral would translate from USB back to ATAPI.
  18  *
  19  * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only,
  20  * which does the USB-to-ATAPI conversion.  By obtaining the data sheet on
  21  * their device under nondisclosure agreement, I have been able to write
  22  * this driver for Linux.
  23  *
  24  * The chip used in the device can also be used for EPP and ISA translation
  25  * as well. This driver is only guaranteed to work with the ATAPI
  26  * translation.
  27  *
  28  * See the Kconfig help text for a list of devices known to be supported by
  29  * this driver.
  30  *
  31  * This program is free software; you can redistribute it and/or modify it
  32  * under the terms of the GNU General Public License as published by the
  33  * Free Software Foundation; either version 2, or (at your option) any
  34  * later version.
  35  *
  36  * This program is distributed in the hope that it will be useful, but
  37  * WITHOUT ANY WARRANTY; without even the implied warranty of
  38  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  39  * General Public License for more details.
  40  *
  41  * You should have received a copy of the GNU General Public License along
  42  * with this program; if not, write to the Free Software Foundation, Inc.,
  43  * 675 Mass Ave, Cambridge, MA 02139, USA.
  44  */
  45
  46 #include <linux/errno.h>
  47 #include <linux/slab.h>
  48 #include <linux/cdrom.h>
  49
  50 #include <scsi/scsi.h>
  51 #include <scsi/scsi_cmnd.h>
  52
  53 #include "usb.h"
  54 #include "transport.h"
  55 #include "protocol.h"
  56 #include "debug.h"
  57 #include "shuttle_usbat.h"
  58
  59 #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
  60 #define LSB_of(s) ((s)&0xFF)
  61 #define MSB_of(s) ((s)>>8)
  62
  63 static int transferred = 0;
  64
  65 static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
  66 static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
  67
  68 /*
  69  * Convenience function to produce an ATA read/write sectors command
  70  * Use cmd=0x20 for read, cmd=0x30 for write
  71  */
  72 static void usbat_pack_ata_sector_cmd(unsigned char *buf,
  73                                         unsigned char thistime,
  74                                         u32 sector, unsigned char cmd)
  75 {
  76         buf[0] = 0;
  77         buf[1] = thistime;
  78         buf[2] = sector & 0xFF;
  79         buf[3] = (sector >>  8) & 0xFF;
  80         buf[4] = (sector >> 16) & 0xFF;
  81         buf[5] = 0xE0 | ((sector >> 24) & 0x0F);
  82         buf[6] = cmd;
  83 }
  84
  85 /*
  86  * Convenience function to get the device type (flash or hp8200)
  87  */
  88 static int usbat_get_device_type(struct us_data *us)
  89 {
  90         return ((struct usbat_info*)us->extra)->devicetype;
  91 }
  92
  93 /*
  94  * Read a register from the device
  95  */
  96 static int usbat_read(struct us_data *us,
  97                       unsigned char access,
  98                       unsigned char reg,
  99                       unsigned char *content)
 100 {
 101         return usb_stor_ctrl_transfer(us,
 102                 us->recv_ctrl_pipe,
 103                 access | USBAT_CMD_READ_REG,
 104                 0xC0,
 105                 (u16)reg,
 106                 0,
 107                 content,
 108                 1);
 109 }
 110
 111 /*
 112  * Write to a register on the device
 113  */
 114 static int usbat_write(struct us_data *us,
 115                        unsigned char access,
 116                        unsigned char reg,
 117                        unsigned char content)
 118 {
 119         return usb_stor_ctrl_transfer(us,
 120                 us->send_ctrl_pipe,
 121                 access | USBAT_CMD_WRITE_REG,
 122                 0x40,
 123                 short_pack(reg, content),
 124                 0,
 125                 NULL,
 126                 0);
 127 }
 128
 129 /*
 130  * Convenience function to perform a bulk read
 131  */
 132 static int usbat_bulk_read(struct us_data *us,
 133                            void* buf,
 134                            unsigned int len,
 135                            int use_sg)
 136 {
 137         if (len == 0)
 138                 return USB_STOR_XFER_GOOD;
 139
 140         US_DEBUGP("usbat_bulk_read: len = %d\n", len);
 141         return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL);
 142 }
 143
 144 /*
 145  * Convenience function to perform a bulk write
 146  */
 147 static int usbat_bulk_write(struct us_data *us,
 148                             void* buf,
 149                             unsigned int len,
 150                             int use_sg)
 151 {
 152         if (len == 0)
 153                 return USB_STOR_XFER_GOOD;
 154
 155         US_DEBUGP("usbat_bulk_write:  len = %d\n", len);
 156         return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL);
 157 }
 158
 159 /*
 160  * Some USBAT-specific commands can only be executed over a command transport
 161  * This transport allows one (len=8) or two (len=16) vendor-specific commands
 162  * to be executed.
 163  */
 164 static int usbat_execute_command(struct us_data *us,
 165                                                                  unsigned char *commands,
 166                                                                  unsigned int len)
 167 {
 168         return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 169                                                                   USBAT_CMD_EXEC_CMD, 0x40, 0, 0,
 170                                                                   commands, len);
 171 }
 172
 173 /*
 174  * Read the status register
 175  */
 176 static int usbat_get_status(struct us_data *us, unsigned char *status)
 177 {
 178         int rc;
 179         rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status);
 180
 181         US_DEBUGP("usbat_get_status: 0x%02X\n", (unsigned short) (*status));
 182         return rc;
 183 }
 184
 185 /*
 186  * Check the device status
 187  */
 188 static int usbat_check_status(struct us_data *us)
 189 {
 190         unsigned char *reply = us->iobuf;
 191         int rc;
 192
 193         rc = usbat_get_status(us, reply);
 194         if (rc != USB_STOR_XFER_GOOD)
 195                 return USB_STOR_TRANSPORT_FAILED;
 196
 197         /* error/check condition (0x51 is ok) */
 198         if (*reply & 0x01 && *reply != 0x51)
 199                 return USB_STOR_TRANSPORT_FAILED;
 200
 201         /* device fault */
 202         if (*reply & 0x20)
 203                 return USB_STOR_TRANSPORT_FAILED;
 204
 205         return USB_STOR_TRANSPORT_GOOD;
 206 }
 207
 208 /*
 209  * Stores critical information in internal registers in prepartion for the execution
 210  * of a conditional usbat_read_blocks or usbat_write_blocks call.
 211  */
 212 static int usbat_set_shuttle_features(struct us_data *us,
 213                                       unsigned char external_trigger,
 214                                       unsigned char epp_control,
 215                                       unsigned char mask_byte,
 216                                       unsigned char test_pattern,
 217                                       unsigned char subcountH,
 218                                       unsigned char subcountL)
 219 {
 220         unsigned char *command = us->iobuf;
 221
 222         command[0] = 0x40;
 223         command[1] = USBAT_CMD_SET_FEAT;
 224
 225         /*
 226          * The only bit relevant to ATA access is bit 6
 227          * which defines 8 bit data access (set) or 16 bit (unset)
 228          */
 229         command[2] = epp_control;
 230
 231         /*
 232          * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
 233          * ET1 and ET2 define an external event to be checked for on event of a
 234          * _read_blocks or _write_blocks operation. The read/write will not take
 235          * place unless the defined trigger signal is active.
 236          */
 237         command[3] = external_trigger;
 238
 239         /*
 240          * The resultant byte of the mask operation (see mask_byte) is compared for
 241          * equivalence with this test pattern. If equal, the read/write will take
 242          * place.
 243          */
 244         command[4] = test_pattern;
 245
 246         /*
 247          * This value is logically ANDed with the status register field specified
 248          * in the read/write command.
 249          */
 250         command[5] = mask_byte;
 251
 252         /*
 253          * If ALQ is set in the qualifier, this field contains the address of the
 254          * registers where the byte count should be read for transferring the data.
 255          * If ALQ is not set, then this field contains the number of bytes to be
 256          * transferred.
 257          */
 258         command[6] = subcountL;
 259         command[7] = subcountH;
 260
 261         return usbat_execute_command(us, command, 8);
 262 }
 263
 264 /*
 265  * Block, waiting for an ATA device to become not busy or to report
 266  * an error condition.
 267  */
 268 static int usbat_wait_not_busy(struct us_data *us, int minutes)
 269 {
 270         int i;
 271         int result;
 272         unsigned char *status = us->iobuf;
 273
 274         /* Synchronizing cache on a CDR could take a heck of a long time,
 275          * but probably not more than 10 minutes or so. On the other hand,
 276          * doing a full blank on a CDRW at speed 1 will take about 75
 277          * minutes!
 278          */
 279
 280         for (i=0; i<1200+minutes*60; i++) {
 281
 282                 result = usbat_get_status(us, status);
 283
 284                 if (result!=USB_STOR_XFER_GOOD)
 285                         return USB_STOR_TRANSPORT_ERROR;
 286                 if (*status & 0x01) { /* check condition */
 287                         result = usbat_read(us, USBAT_ATA, 0x10, status);
 288                         return USB_STOR_TRANSPORT_FAILED;
 289                 }
 290                 if (*status & 0x20) /* device fault */
 291                         return USB_STOR_TRANSPORT_FAILED;
 292
 293                 if ((*status & 0x80)==0x00) { /* not busy */
 294                         US_DEBUGP("Waited not busy for %d steps\n", i);
 295                         return USB_STOR_TRANSPORT_GOOD;
 296                 }
 297
 298                 if (i<500)
 299                         msleep(10); /* 5 seconds */
 300                 else if (i<700)
 301                         msleep(50); /* 10 seconds */
 302                 else if (i<1200)
 303                         msleep(100); /* 50 seconds */
 304                 else
 305                         msleep(1000); /* X minutes */
 306         }
 307
 308         US_DEBUGP("Waited not busy for %d minutes, timing out.\n",
 309                 minutes);
 310         return USB_STOR_TRANSPORT_FAILED;
 311 }
 312
 313 /*
 314  * Read block data from the data register
 315  */
 316 static int usbat_read_block(struct us_data *us,
 317                             void* buf,
 318                             unsigned short len,
 319                             int use_sg)
 320 {
 321         int result;
 322         unsigned char *command = us->iobuf;
 323
 324         if (!len)
 325                 return USB_STOR_TRANSPORT_GOOD;
 326
 327         command[0] = 0xC0;
 328         command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK;
 329         command[2] = USBAT_ATA_DATA;
 330         command[3] = 0;
 331         command[4] = 0;
 332         command[5] = 0;
 333         command[6] = LSB_of(len);
 334         command[7] = MSB_of(len);
 335
 336         result = usbat_execute_command(us, command, 8);
 337         if (result != USB_STOR_XFER_GOOD)
 338                 return USB_STOR_TRANSPORT_ERROR;
 339
 340         result = usbat_bulk_read(us, buf, len, use_sg);
 341         return (result == USB_STOR_XFER_GOOD ?
 342                         USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
 343 }
 344
 345 /*
 346  * Write block data via the data register
 347  */
 348 static int usbat_write_block(struct us_data *us,
 349                              unsigned char access,
 350                              void* buf,
 351                              unsigned short len,
 352                              int minutes,
 353                              int use_sg)
 354 {
 355         int result;
 356         unsigned char *command = us->iobuf;
 357
 358         if (!len)
 359                 return USB_STOR_TRANSPORT_GOOD;
 360
 361         command[0] = 0x40;
 362         command[1] = access | USBAT_CMD_WRITE_BLOCK;
 363         command[2] = USBAT_ATA_DATA;
 364         command[3] = 0;
 365         command[4] = 0;
 366         command[5] = 0;
 367         command[6] = LSB_of(len);
 368         command[7] = MSB_of(len);
 369
 370         result = usbat_execute_command(us, command, 8);
 371
 372         if (result != USB_STOR_XFER_GOOD)
 373                 return USB_STOR_TRANSPORT_ERROR;
 374
 375         result = usbat_bulk_write(us, buf, len, use_sg);
 376         if (result != USB_STOR_XFER_GOOD)
 377                 return USB_STOR_TRANSPORT_ERROR;
 378
 379         return usbat_wait_not_busy(us, minutes);
 380 }
 381
 382 /*
 383  * Process read and write requests
 384  */
 385 static int usbat_hp8200e_rw_block_test(struct us_data *us,
 386                                        unsigned char access,
 387                                        unsigned char *registers,
 388                                        unsigned char *data_out,
 389                                        unsigned short num_registers,
 390                                        unsigned char data_reg,
 391                                        unsigned char status_reg,
 392                                        unsigned char timeout,
 393                                        unsigned char qualifier,
 394                                        int direction,
 395                                        void *buf,
 396                                        unsigned short len,
 397                                        int use_sg,
 398                                        int minutes)
 399 {
 400         int result;
 401         unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
 402                         us->recv_bulk_pipe : us->send_bulk_pipe;
 403
 404         unsigned char *command = us->iobuf;
 405         int i, j;
 406         int cmdlen;
 407         unsigned char *data = us->iobuf;
 408         unsigned char *status = us->iobuf;
 409
 410         BUG_ON(num_registers > US_IOBUF_SIZE/2);
 411
 412         for (i=0; i<20; i++) {
 413
 414                 /*
 415                  * The first time we send the full command, which consists
 416                  * of downloading the SCSI command followed by downloading
 417                  * the data via a write-and-test.  Any other time we only
 418                  * send the command to download the data -- the SCSI command
 419                  * is still 'active' in some sense in the device.
 420                  *
 421                  * We're only going to try sending the data 10 times. After
 422                  * that, we just return a failure.
 423                  */
 424
 425                 if (i==0) {
 426                         cmdlen = 16;
 427                         /*
 428                          * Write to multiple registers
 429                          * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
 430                          * necessary here, but that's what came out of the
 431                          * trace every single time.
 432                          */
 433                         command[0] = 0x40;
 434                         command[1] = access | USBAT_CMD_WRITE_REGS;
 435                         command[2] = 0x07;
 436                         command[3] = 0x17;
 437                         command[4] = 0xFC;
 438                         command[5] = 0xE7;
 439                         command[6] = LSB_of(num_registers*2);
 440                         command[7] = MSB_of(num_registers*2);
 441                 } else
 442                         cmdlen = 8;
 443
 444                 /* Conditionally read or write blocks */
 445                 command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
 446                 command[cmdlen-7] = access |
 447                                 (direction==DMA_TO_DEVICE ?
 448                                  USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK);
 449                 command[cmdlen-6] = data_reg;
 450                 command[cmdlen-5] = status_reg;
 451                 command[cmdlen-4] = timeout;
 452                 command[cmdlen-3] = qualifier;
 453                 command[cmdlen-2] = LSB_of(len);
 454                 command[cmdlen-1] = MSB_of(len);
 455
 456                 result = usbat_execute_command(us, command, cmdlen);
 457
 458                 if (result != USB_STOR_XFER_GOOD)
 459                         return USB_STOR_TRANSPORT_ERROR;
 460
 461                 if (i==0) {
 462
 463                         for (j=0; j<num_registers; j++) {
 464                                 data[j<<1] = registers[j];
 465                                 data[1+(j<<1)] = data_out[j];
 466                         }
 467
 468                         result = usbat_bulk_write(us, data, num_registers*2, 0);
 469                         if (result != USB_STOR_XFER_GOOD)
 470                                 return USB_STOR_TRANSPORT_ERROR;
 471
 472                 }
 473
 474                 result = usb_stor_bulk_transfer_sg(us,
 475                         pipe, buf, len, use_sg, NULL);
 476
 477                 /*
 478                  * If we get a stall on the bulk download, we'll retry
 479                  * the bulk download -- but not the SCSI command because
 480                  * in some sense the SCSI command is still 'active' and
 481                  * waiting for the data. Don't ask me why this should be;
 482                  * I'm only following what the Windoze driver did.
 483                  *
 484                  * Note that a stall for the test-and-read/write command means
 485                  * that the test failed. In this case we're testing to make
 486                  * sure that the device is error-free
 487                  * (i.e. bit 0 -- CHK -- of status is 0). The most likely
 488                  * hypothesis is that the USBAT chip somehow knows what
 489                  * the device will accept, but doesn't give the device any
 490                  * data until all data is received. Thus, the device would
 491                  * still be waiting for the first byte of data if a stall
 492                  * occurs, even if the stall implies that some data was
 493                  * transferred.
 494                  */
 495
 496                 if (result == USB_STOR_XFER_SHORT ||
 497                                 result == USB_STOR_XFER_STALLED) {
 498
 499                         /*
 500                          * If we're reading and we stalled, then clear
 501                          * the bulk output pipe only the first time.
 502                          */
 503
 504                         if (direction==DMA_FROM_DEVICE && i==0) {
 505                                 if (usb_stor_clear_halt(us,
 506                                                 us->send_bulk_pipe) < 0)
 507                                         return USB_STOR_TRANSPORT_ERROR;
 508                         }
 509
 510                         /*
 511                          * Read status: is the device angry, or just busy?
 512                          */
 513
 514                         result = usbat_read(us, USBAT_ATA,
 515                                 direction==DMA_TO_DEVICE ?
 516                                         USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS,
 517                                 status);
 518
 519                         if (result!=USB_STOR_XFER_GOOD)
 520                                 return USB_STOR_TRANSPORT_ERROR;
 521                         if (*status & 0x01) /* check condition */
 522                                 return USB_STOR_TRANSPORT_FAILED;
 523                         if (*status & 0x20) /* device fault */
 524                                 return USB_STOR_TRANSPORT_FAILED;
 525
 526                         US_DEBUGP("Redoing %s\n",
 527                           direction==DMA_TO_DEVICE ? "write" : "read");
 528
 529                 } else if (result != USB_STOR_XFER_GOOD)
 530                         return USB_STOR_TRANSPORT_ERROR;
 531                 else
 532                         return usbat_wait_not_busy(us, minutes);
 533
 534         }
 535
 536         US_DEBUGP("Bummer! %s bulk data 20 times failed.\n",
 537                 direction==DMA_TO_DEVICE ? "Writing" : "Reading");
 538
 539         return USB_STOR_TRANSPORT_FAILED;
 540 }
 541
 542 /*
 543  * Write to multiple registers:
 544  * Allows us to write specific data to any registers. The data to be written
 545  * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN
 546  * which gets sent through bulk out.
 547  * Not designed for large transfers of data!
 548  */
 549 static int usbat_multiple_write(struct us_data *us,
 550                                 unsigned char *registers,
 551                                 unsigned char *data_out,
 552                                 unsigned short num_registers)
 553 {
 554         int i, result;
 555         unsigned char *data = us->iobuf;
 556         unsigned char *command = us->iobuf;
 557
 558         BUG_ON(num_registers > US_IOBUF_SIZE/2);
 559
 560         /* Write to multiple registers, ATA access */
 561         command[0] = 0x40;
 562         command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
 563
 564         /* No relevance */
 565         command[2] = 0;
 566         command[3] = 0;
 567         command[4] = 0;
 568         command[5] = 0;
 569
 570         /* Number of bytes to be transferred (incl. addresses and data) */
 571         command[6] = LSB_of(num_registers*2);
 572         command[7] = MSB_of(num_registers*2);
 573
 574         /* The setup command */
 575         result = usbat_execute_command(us, command, 8);
 576         if (result != USB_STOR_XFER_GOOD)
 577                 return USB_STOR_TRANSPORT_ERROR;
 578
 579         /* Create the reg/data, reg/data sequence */
 580         for (i=0; i<num_registers; i++) {
 581                 data[i<<1] = registers[i];
 582                 data[1+(i<<1)] = data_out[i];
 583         }
 584
 585         /* Send the data */
 586         result = usbat_bulk_write(us, data, num_registers*2, 0);
 587         if (result != USB_STOR_XFER_GOOD)
 588                 return USB_STOR_TRANSPORT_ERROR;
 589
 590         if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
 591                 return usbat_wait_not_busy(us, 0);
 592         else
 593                 return USB_STOR_TRANSPORT_GOOD;
 594 }
 595
 596 /*
 597  * Conditionally read blocks from device:
 598  * Allows us to read blocks from a specific data register, based upon the
 599  * condition that a status register can be successfully masked with a status
 600  * qualifier. If this condition is not initially met, the read will wait
 601  * up until a maximum amount of time has elapsed, as specified by timeout.
 602  * The read will start when the condition is met, otherwise the command aborts.
 603  *
 604  * The qualifier defined here is not the value that is masked, it defines
 605  * conditions for the write to take place. The actual masked qualifier (and
 606  * other related details) are defined beforehand with _set_shuttle_features().
 607  */
 608 static int usbat_read_blocks(struct us_data *us,
 609                              void* buffer,
 610                              int len,
 611                              int use_sg)
 612 {
 613         int result;
 614         unsigned char *command = us->iobuf;
 615
 616         command[0] = 0xC0;
 617         command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
 618         command[2] = USBAT_ATA_DATA;
 619         command[3] = USBAT_ATA_STATUS;
 620         command[4] = 0xFD; /* Timeout (ms); */
 621         command[5] = USBAT_QUAL_FCQ;
 622         command[6] = LSB_of(len);
 623         command[7] = MSB_of(len);
 624
 625         /* Multiple block read setup command */
 626         result = usbat_execute_command(us, command, 8);
 627         if (result != USB_STOR_XFER_GOOD)
 628                 return USB_STOR_TRANSPORT_FAILED;
 629
 630         /* Read the blocks we just asked for */
 631         result = usbat_bulk_read(us, buffer, len, use_sg);
 632         if (result != USB_STOR_XFER_GOOD)
 633                 return USB_STOR_TRANSPORT_FAILED;
 634
 635         return USB_STOR_TRANSPORT_GOOD;
 636 }
 637
 638 /*
 639  * Conditionally write blocks to device:
 640  * Allows us to write blocks to a specific data register, based upon the
 641  * condition that a status register can be successfully masked with a status
 642  * qualifier. If this condition is not initially met, the write will wait
 643  * up until a maximum amount of time has elapsed, as specified by timeout.
 644  * The read will start when the condition is met, otherwise the command aborts.
 645  *
 646  * The qualifier defined here is not the value that is masked, it defines
 647  * conditions for the write to take place. The actual masked qualifier (and
 648  * other related details) are defined beforehand with _set_shuttle_features().
 649  */
 650 static int usbat_write_blocks(struct us_data *us,
 651                               void* buffer,
 652                               int len,
 653                               int use_sg)
 654 {
 655         int result;
 656         unsigned char *command = us->iobuf;
 657
 658         command[0] = 0x40;
 659         command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
 660         command[2] = USBAT_ATA_DATA;
 661         command[3] = USBAT_ATA_STATUS;
 662         command[4] = 0xFD; /* Timeout (ms) */
 663         command[5] = USBAT_QUAL_FCQ;
 664         command[6] = LSB_of(len);
 665         command[7] = MSB_of(len);
 666
 667         /* Multiple block write setup command */
 668         result = usbat_execute_command(us, command, 8);
 669         if (result != USB_STOR_XFER_GOOD)
 670                 return USB_STOR_TRANSPORT_FAILED;
 671
 672         /* Write the data */
 673         result = usbat_bulk_write(us, buffer, len, use_sg);
 674         if (result != USB_STOR_XFER_GOOD)
 675                 return USB_STOR_TRANSPORT_FAILED;
 676
 677         return USB_STOR_TRANSPORT_GOOD;
 678 }
 679
 680 /*
 681  * Read the User IO register
 682  */
 683 static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags)
 684 {
 685         int result;
 686
 687         result = usb_stor_ctrl_transfer(us,
 688                 us->recv_ctrl_pipe,
 689                 USBAT_CMD_UIO,
 690                 0xC0,
 691                 0,
 692                 0,
 693                 data_flags,
 694                 USBAT_UIO_READ);
 695
 696         US_DEBUGP("usbat_read_user_io: UIO register reads %02X\n", (unsigned short) (*data_flags));
 697
 698         return result;
 699 }
 700
 701 /*
 702  * Write to the User IO register
 703  */
 704 static int usbat_write_user_io(struct us_data *us,
 705                                unsigned char enable_flags,
 706                                unsigned char data_flags)
 707 {
 708         return usb_stor_ctrl_transfer(us,
 709                 us->send_ctrl_pipe,
 710                 USBAT_CMD_UIO,
 711                 0x40,
 712                 short_pack(enable_flags, data_flags),
 713                 0,
 714                 NULL,
 715                 USBAT_UIO_WRITE);
 716 }
 717
 718 /*
 719  * Reset the device
 720  * Often needed on media change.
 721  */
 722 static int usbat_device_reset(struct us_data *us)
 723 {
 724         int rc;
 725
 726         /*
 727          * Reset peripheral, enable peripheral control signals
 728          * (bring reset signal up)
 729          */
 730         rc = usbat_write_user_io(us,
 731                                                          USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
 732                                                          USBAT_UIO_EPAD | USBAT_UIO_1);
 733         if (rc != USB_STOR_XFER_GOOD)
 734                 return USB_STOR_TRANSPORT_ERROR;
 735
 736         /*
 737          * Enable peripheral control signals
 738          * (bring reset signal down)
 739          */
 740         rc = usbat_write_user_io(us,
 741                                                          USBAT_UIO_OE1  | USBAT_UIO_OE0,
 742                                                          USBAT_UIO_EPAD | USBAT_UIO_1);
 743         if (rc != USB_STOR_XFER_GOOD)
 744                 return USB_STOR_TRANSPORT_ERROR;
 745
 746         return USB_STOR_TRANSPORT_GOOD;
 747 }
 748
 749 /*
 750  * Enable card detect
 751  */
 752 static int usbat_device_enable_cdt(struct us_data *us)
 753 {
 754         int rc;
 755
 756         /* Enable peripheral control signals and card detect */
 757         rc = usbat_write_user_io(us,
 758                                                          USBAT_UIO_ACKD | USBAT_UIO_OE1  | USBAT_UIO_OE0,
 759                                                          USBAT_UIO_EPAD | USBAT_UIO_1);
 760         if (rc != USB_STOR_XFER_GOOD)
 761                 return USB_STOR_TRANSPORT_ERROR;
 762
 763         return USB_STOR_TRANSPORT_GOOD;
 764 }
 765
 766 /*
 767  * Determine if media is present.
 768  */
 769 static int usbat_flash_check_media_present(unsigned char *uio)
 770 {
 771         if (*uio & USBAT_UIO_UI0) {
 772                 US_DEBUGP("usbat_flash_check_media_present: no media detected\n");
 773                 return USBAT_FLASH_MEDIA_NONE;
 774         }
 775
 776         return USBAT_FLASH_MEDIA_CF;
 777 }
 778
 779 /*
 780  * Determine if media has changed since last operation
 781  */
 782 static int usbat_flash_check_media_changed(unsigned char *uio)
 783 {
 784         if (*uio & USBAT_UIO_0) {
 785                 US_DEBUGP("usbat_flash_check_media_changed: media change detected\n");
 786                 return USBAT_FLASH_MEDIA_CHANGED;
 787         }
 788
 789         return USBAT_FLASH_MEDIA_SAME;
 790 }
 791
 792 /*
 793  * Check for media change / no media and handle the situation appropriately
 794  */
 795 static int usbat_flash_check_media(struct us_data *us,
 796                                    struct usbat_info *info)
 797 {
 798         int rc;
 799         unsigned char *uio = us->iobuf;
 800
 801         rc = usbat_read_user_io(us, uio);
 802         if (rc != USB_STOR_XFER_GOOD)
 803                 return USB_STOR_TRANSPORT_ERROR;
 804
 805         /* Check for media existence */
 806         rc = usbat_flash_check_media_present(uio);
 807         if (rc == USBAT_FLASH_MEDIA_NONE) {
 808                 info->sense_key = 0x02;
 809                 info->sense_asc = 0x3A;
 810                 info->sense_ascq = 0x00;
 811                 return USB_STOR_TRANSPORT_FAILED;
 812         }
 813
 814         /* Check for media change */
 815         rc = usbat_flash_check_media_changed(uio);
 816         if (rc == USBAT_FLASH_MEDIA_CHANGED) {
 817
 818                 /* Reset and re-enable card detect */
 819                 rc = usbat_device_reset(us);
 820                 if (rc != USB_STOR_TRANSPORT_GOOD)
 821                         return rc;
 822                 rc = usbat_device_enable_cdt(us);
 823                 if (rc != USB_STOR_TRANSPORT_GOOD)
 824                         return rc;
 825
 826                 msleep(50);
 827
 828                 rc = usbat_read_user_io(us, uio);
 829                 if (rc != USB_STOR_XFER_GOOD)
 830                         return USB_STOR_TRANSPORT_ERROR;
 831
 832                 info->sense_key = UNIT_ATTENTION;
 833                 info->sense_asc = 0x28;
 834                 info->sense_ascq = 0x00;
 835                 return USB_STOR_TRANSPORT_FAILED;
 836         }
 837
 838         return USB_STOR_TRANSPORT_GOOD;
 839 }
 840
 841 /*
 842  * Determine whether we are controlling a flash-based reader/writer,
 843  * or a HP8200-based CD drive.
 844  * Sets transport functions as appropriate.
 845  */
 846 static int usbat_identify_device(struct us_data *us,
 847                                  struct usbat_info *info)
 848 {
 849         int rc;
 850         unsigned char status;
 851
 852         if (!us || !info)
 853                 return USB_STOR_TRANSPORT_ERROR;
 854
 855         rc = usbat_device_reset(us);
 856         if (rc != USB_STOR_TRANSPORT_GOOD)
 857                 return rc;
 858         msleep(500);
 859
 860         /*
 861          * In attempt to distinguish between HP CDRW's and Flash readers, we now
 862          * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
 863          * readers), this command should fail with error. On ATAPI devices (i.e.
 864          * CDROM drives), it should succeed.
 865          */
 866         rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
 867         if (rc != USB_STOR_XFER_GOOD)
 868                 return USB_STOR_TRANSPORT_ERROR;
 869
 870         rc = usbat_get_status(us, &status);
 871         if (rc != USB_STOR_XFER_GOOD)
 872                 return USB_STOR_TRANSPORT_ERROR;
 873
 874         /* Check for error bit, or if the command 'fell through' */
 875         if (status == 0xA1 || !(status & 0x01)) {
 876                 /* Device is HP 8200 */
 877                 US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
 878                 info->devicetype = USBAT_DEV_HP8200;
 879         } else {
 880                 /* Device is a CompactFlash reader/writer */
 881                 US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
 882                 info->devicetype = USBAT_DEV_FLASH;
 883         }
 884
 885         return USB_STOR_TRANSPORT_GOOD;
 886 }
 887
 888 /*
 889  * Set the transport function based on the device type
 890  */
 891 static int usbat_set_transport(struct us_data *us,
 892                                struct usbat_info *info,
 893                                int devicetype)
 894 {
 895
 896         if (!info->devicetype)
 897                 info->devicetype = devicetype;
 898
 899         if (!info->devicetype)
 900                 usbat_identify_device(us, info);
 901
 902         switch (info->devicetype) {
 903         default:
 904                 return USB_STOR_TRANSPORT_ERROR;
 905
 906         case  USBAT_DEV_HP8200:
 907                 us->transport = usbat_hp8200e_transport;
 908                 break;
 909
 910         case USBAT_DEV_FLASH:
 911                 us->transport = usbat_flash_transport;
 912                 break;
 913         }
 914
 915         return 0;
 916 }
 917
 918 /*
 919  * Read the media capacity
 920  */
 921 static int usbat_flash_get_sector_count(struct us_data *us,
 922                                         struct usbat_info *info)
 923 {
 924         unsigned char registers[3] = {
 925                 USBAT_ATA_SECCNT,
 926                 USBAT_ATA_DEVICE,
 927                 USBAT_ATA_CMD,
 928         };
 929         unsigned char  command[3] = { 0x01, 0xA0, 0xEC };
 930         unsigned char *reply;
 931         unsigned char status;
 932         int rc;
 933
 934         if (!us || !info)
 935                 return USB_STOR_TRANSPORT_ERROR;
 936
 937         reply = kmalloc(512, GFP_NOIO);
 938         if (!reply)
 939                 return USB_STOR_TRANSPORT_ERROR;
 940
 941         /* ATA command : IDENTIFY DEVICE */
 942         rc = usbat_multiple_write(us, registers, command, 3);
 943         if (rc != USB_STOR_XFER_GOOD) {
 944                 US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n");
 945                 rc = USB_STOR_TRANSPORT_ERROR;
 946                 goto leave;
 947         }
 948
 949         /* Read device status */
 950         if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
 951                 rc = USB_STOR_TRANSPORT_ERROR;
 952                 goto leave;
 953         }
 954
 955         msleep(100);
 956
 957         /* Read the device identification data */
 958         rc = usbat_read_block(us, reply, 512, 0);
 959         if (rc != USB_STOR_TRANSPORT_GOOD)
 960                 goto leave;
 961
 962         info->sectors = ((u32)(reply[117]) << 24) |
 963                 ((u32)(reply[116]) << 16) |
 964                 ((u32)(reply[115]) <<  8) |
 965                 ((u32)(reply[114])      );
 966
 967         rc = USB_STOR_TRANSPORT_GOOD;
 968
 969  leave:
 970         kfree(reply);
 971         return rc;
 972 }
 973
 974 /*
 975  * Read data from device
 976  */
 977 static int usbat_flash_read_data(struct us_data *us,
 978                                                                  struct usbat_info *info,
 979                                                                  u32 sector,
 980                                                                  u32 sectors)
 981 {
 982         unsigned char registers[7] = {
 983                 USBAT_ATA_FEATURES,
 984                 USBAT_ATA_SECCNT,
 985                 USBAT_ATA_SECNUM,
 986                 USBAT_ATA_LBA_ME,
 987                 USBAT_ATA_LBA_HI,
 988                 USBAT_ATA_DEVICE,
 989                 USBAT_ATA_STATUS,
 990         };
 991         unsigned char command[7];
 992         unsigned char *buffer;
 993         unsigned char  thistime;
 994         unsigned int totallen, alloclen;
 995         int len, result;
 996         unsigned int sg_offset = 0;
 997         struct scatterlist *sg = NULL;
 998
 999         result = usbat_flash_check_media(us, info);
1000         if (result != USB_STOR_TRANSPORT_GOOD)
1001                 return result;
1002
1003         /*
1004          * we're working in LBA mode.  according to the ATA spec,
1005          * we can support up to 28-bit addressing.  I don't know if Jumpshot
1006          * supports beyond 24-bit addressing.  It's kind of hard to test
1007          * since it requires > 8GB CF card.
1008          */
1009
1010         if (sector > 0x0FFFFFFF)
1011                 return USB_STOR_TRANSPORT_ERROR;
1012
1013         totallen = sectors * info->ssize;
1014
1015         /*
1016          * Since we don't read more than 64 KB at a time, we have to create
1017          * a bounce buffer and move the data a piece at a time between the
1018          * bounce buffer and the actual transfer buffer.
1019          */
1020
1021         alloclen = min(totallen, 65536u);
1022         buffer = kmalloc(alloclen, GFP_NOIO);
1023         if (buffer == NULL)
1024                 return USB_STOR_TRANSPORT_ERROR;
1025
1026         do {
1027                 /*
1028                  * loop, never allocate or transfer more than 64k at once
1029                  * (min(128k, 255*info->ssize) is the real limit)
1030                  */
1031                 len = min(totallen, alloclen);
1032                 thistime = (len / info->ssize) & 0xff;
1033
1034                 /* ATA command 0x20 (READ SECTORS) */
1035                 usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
1036
1037                 /* Write/execute ATA read command */
1038                 result = usbat_multiple_write(us, registers, command, 7);
1039                 if (result != USB_STOR_TRANSPORT_GOOD)
1040                         goto leave;
1041
1042                 /* Read the data we just requested */
1043                 result = usbat_read_blocks(us, buffer, len, 0);
1044                 if (result != USB_STOR_TRANSPORT_GOOD)
1045                         goto leave;
1046
1047                 US_DEBUGP("usbat_flash_read_data:  %d bytes\n", len);
1048
1049                 /* Store the data in the transfer buffer */
1050                 usb_stor_access_xfer_buf(buffer, len, us->srb,
1051                                          &sg, &sg_offset, TO_XFER_BUF);
1052
1053                 sector += thistime;
1054                 totallen -= len;
1055         } while (totallen > 0);
1056
1057         kfree(buffer);
1058         return USB_STOR_TRANSPORT_GOOD;
1059
1060 leave:
1061         kfree(buffer);
1062         return USB_STOR_TRANSPORT_ERROR;
1063 }
1064
1065 /*
1066  * Write data to device
1067  */
1068 static int usbat_flash_write_data(struct us_data *us,
1069                                                                   struct usbat_info *info,
1070                                                                   u32 sector,
1071                                                                   u32 sectors)
1072 {
1073         unsigned char registers[7] = {
1074                 USBAT_ATA_FEATURES,
1075                 USBAT_ATA_SECCNT,
1076                 USBAT_ATA_SECNUM,
1077                 USBAT_ATA_LBA_ME,
1078                 USBAT_ATA_LBA_HI,
1079                 USBAT_ATA_DEVICE,
1080                 USBAT_ATA_STATUS,
1081         };
1082         unsigned char command[7];
1083         unsigned char *buffer;
1084         unsigned char  thistime;
1085         unsigned int totallen, alloclen;
1086         int len, result;
1087         unsigned int sg_offset = 0;
1088         struct scatterlist *sg = NULL;
1089
1090         result = usbat_flash_check_media(us, info);
1091         if (result != USB_STOR_TRANSPORT_GOOD)
1092                 return result;
1093
1094         /*
1095          * we're working in LBA mode.  according to the ATA spec,
1096          * we can support up to 28-bit addressing.  I don't know if the device
1097          * supports beyond 24-bit addressing.  It's kind of hard to test
1098          * since it requires > 8GB media.
1099          */
1100
1101         if (sector > 0x0FFFFFFF)
1102                 return USB_STOR_TRANSPORT_ERROR;
1103
1104         totallen = sectors * info->ssize;
1105
1106         /*
1107          * Since we don't write more than 64 KB at a time, we have to create
1108          * a bounce buffer and move the data a piece at a time between the
1109          * bounce buffer and the actual transfer buffer.
1110          */
1111
1112         alloclen = min(totallen, 65536u);
1113         buffer = kmalloc(alloclen, GFP_NOIO);
1114         if (buffer == NULL)
1115                 return USB_STOR_TRANSPORT_ERROR;
1116
1117         do {
1118                 /*
1119                  * loop, never allocate or transfer more than 64k at once
1120                  * (min(128k, 255*info->ssize) is the real limit)
1121                  */
1122                 len = min(totallen, alloclen);
1123                 thistime = (len / info->ssize) & 0xff;
1124
1125                 /* Get the data from the transfer buffer */
1126                 usb_stor_access_xfer_buf(buffer, len, us->srb,
1127                                          &sg, &sg_offset, FROM_XFER_BUF);
1128
1129                 /* ATA command 0x30 (WRITE SECTORS) */
1130                 usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
1131
1132                 /* Write/execute ATA write command */
1133                 result = usbat_multiple_write(us, registers, command, 7);
1134                 if (result != USB_STOR_TRANSPORT_GOOD)
1135                         goto leave;
1136
1137                 /* Write the data */
1138                 result = usbat_write_blocks(us, buffer, len, 0);
1139                 if (result != USB_STOR_TRANSPORT_GOOD)
1140                         goto leave;
1141
1142                 sector += thistime;
1143                 totallen -= len;
1144         } while (totallen > 0);
1145
1146         kfree(buffer);
1147         return result;
1148
1149 leave:
1150         kfree(buffer);
1151         return USB_STOR_TRANSPORT_ERROR;
1152 }
1153
1154 /*
1155  * Squeeze a potentially huge (> 65535 byte) read10 command into
1156  * a little ( <= 65535 byte) ATAPI pipe
1157  */
1158 static int usbat_hp8200e_handle_read10(struct us_data *us,
1159                                        unsigned char *registers,
1160                                        unsigned char *data,
1161                                        struct scsi_cmnd *srb)
1162 {
1163         int result = USB_STOR_TRANSPORT_GOOD;
1164         unsigned char *buffer;
1165         unsigned int len;
1166         unsigned int sector;
1167         unsigned int sg_offset = 0;
1168         struct scatterlist *sg = NULL;
1169
1170         US_DEBUGP("handle_read10: transfersize %d\n",
1171                 srb->transfersize);
1172
1173         if (scsi_bufflen(srb) < 0x10000) {
1174
1175                 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
1176                         registers, data, 19,
1177                         USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
1178                         (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
1179                         DMA_FROM_DEVICE,
1180                         scsi_sglist(srb),
1181                         scsi_bufflen(srb), scsi_sg_count(srb), 1);
1182
1183                 return result;
1184         }
1185
1186         /*
1187          * Since we're requesting more data than we can handle in
1188          * a single read command (max is 64k-1), we will perform
1189          * multiple reads, but each read must be in multiples of
1190          * a sector.  Luckily the sector size is in srb->transfersize
1191          * (see linux/drivers/scsi/sr.c).
1192          */
1193
1194         if (data[7+0] == GPCMD_READ_CD) {
1195                 len = short_pack(data[7+9], data[7+8]);
1196                 len <<= 16;
1197                 len |= data[7+7];
1198                 US_DEBUGP("handle_read10: GPCMD_READ_CD: len %d\n", len);
1199                 srb->transfersize = scsi_bufflen(srb)/len;
1200         }
1201
1202         if (!srb->transfersize)  {
1203                 srb->transfersize = 2048; /* A guess */
1204                 US_DEBUGP("handle_read10: transfersize 0, forcing %d\n",
1205                         srb->transfersize);
1206         }
1207
1208         /*
1209          * Since we only read in one block at a time, we have to create
1210          * a bounce buffer and move the data a piece at a time between the
1211          * bounce buffer and the actual transfer buffer.
1212          */
1213
1214         len = (65535/srb->transfersize) * srb->transfersize;
1215         US_DEBUGP("Max read is %d bytes\n", len);
1216         len = min(len, scsi_bufflen(srb));
1217         buffer = kmalloc(len, GFP_NOIO);
1218         if (buffer == NULL) /* bloody hell! */
1219                 return USB_STOR_TRANSPORT_FAILED;
1220         sector = short_pack(data[7+3], data[7+2]);
1221         sector <<= 16;
1222         sector |= short_pack(data[7+5], data[7+4]);
1223         transferred = 0;
1224
1225         while (transferred != scsi_bufflen(srb)) {
1226
1227                 if (len > scsi_bufflen(srb) - transferred)
1228                         len = scsi_bufflen(srb) - transferred;
1229
1230                 data[3] = len&0xFF;       /* (cylL) = expected length (L) */
1231                 data[4] = (len>>8)&0xFF;  /* (cylH) = expected length (H) */
1232
1233                 /* Fix up the SCSI command sector and num sectors */
1234
1235                 data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
1236                 data[7+3] = LSB_of(sector>>16);
1237                 data[7+4] = MSB_of(sector&0xFFFF);
1238                 data[7+5] = LSB_of(sector&0xFFFF);
1239                 if (data[7+0] == GPCMD_READ_CD)
1240                         data[7+6] = 0;
1241                 data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
1242                 data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
1243
1244                 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
1245                         registers, data, 19,
1246                         USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
1247                         (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
1248                         DMA_FROM_DEVICE,
1249                         buffer,
1250                         len, 0, 1);
1251
1252                 if (result != USB_STOR_TRANSPORT_GOOD)
1253                         break;
1254
1255                 /* Store the data in the transfer buffer */
1256                 usb_stor_access_xfer_buf(buffer, len, srb,
1257                                  &sg, &sg_offset, TO_XFER_BUF);
1258
1259                 /* Update the amount transferred and the sector number */
1260
1261                 transferred += len;
1262                 sector += len / srb->transfersize;
1263
1264         } /* while transferred != scsi_bufflen(srb) */
1265
1266         kfree(buffer);
1267         return result;
1268 }
1269
1270 static int usbat_select_and_test_registers(struct us_data *us)
1271 {
1272         int selector;
1273         unsigned char *status = us->iobuf;
1274
1275         /* try device = master, then device = slave. */
1276         for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
1277                 if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
1278                                 USB_STOR_XFER_GOOD)
1279                         return USB_STOR_TRANSPORT_ERROR;
1280
1281                 if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) !=
1282                                 USB_STOR_XFER_GOOD)
1283                         return USB_STOR_TRANSPORT_ERROR;
1284
1285                 if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) !=
1286                                 USB_STOR_XFER_GOOD)
1287                         return USB_STOR_TRANSPORT_ERROR;
1288
1289                 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
1290                                 USB_STOR_XFER_GOOD)
1291                         return USB_STOR_TRANSPORT_ERROR;
1292
1293                 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
1294                                 USB_STOR_XFER_GOOD)
1295                         return USB_STOR_TRANSPORT_ERROR;
1296
1297                 if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) !=
1298                                 USB_STOR_XFER_GOOD)
1299                         return USB_STOR_TRANSPORT_ERROR;
1300
1301                 if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) !=
1302                                 USB_STOR_XFER_GOOD)
1303                         return USB_STOR_TRANSPORT_ERROR;
1304
1305                 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
1306                                 USB_STOR_XFER_GOOD)
1307                         return USB_STOR_TRANSPORT_ERROR;
1308
1309                 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
1310                                 USB_STOR_XFER_GOOD)
1311                         return USB_STOR_TRANSPORT_ERROR;
1312         }
1313
1314         return USB_STOR_TRANSPORT_GOOD;
1315 }
1316
1317 /*
1318  * Initialize the USBAT processor and the storage device
1319  */
1320 static int init_usbat(struct us_data *us, int devicetype)
1321 {
1322         int rc;
1323         struct usbat_info *info;
1324         unsigned char subcountH = USBAT_ATA_LBA_HI;
1325         unsigned char subcountL = USBAT_ATA_LBA_ME;
1326         unsigned char *status = us->iobuf;
1327
1328         us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO);
1329         if (!us->extra) {
1330                 US_DEBUGP("init_usbat: Gah! Can't allocate storage for usbat info struct!\n");
1331                 return 1;
1332         }
1333         info = (struct usbat_info *) (us->extra);
1334
1335         /* Enable peripheral control signals */
1336         rc = usbat_write_user_io(us,
1337                                  USBAT_UIO_OE1 | USBAT_UIO_OE0,
1338                                  USBAT_UIO_EPAD | USBAT_UIO_1);
1339         if (rc != USB_STOR_XFER_GOOD)
1340                 return USB_STOR_TRANSPORT_ERROR;
1341
1342         US_DEBUGP("INIT 1\n");
1343
1344         msleep(2000);
1345
1346         rc = usbat_read_user_io(us, status);
1347         if (rc != USB_STOR_TRANSPORT_GOOD)
1348                 return rc;
1349
1350         US_DEBUGP("INIT 2\n");
1351
1352         rc = usbat_read_user_io(us, status);
1353         if (rc != USB_STOR_XFER_GOOD)
1354                 return USB_STOR_TRANSPORT_ERROR;
1355
1356         rc = usbat_read_user_io(us, status);
1357         if (rc != USB_STOR_XFER_GOOD)
1358                 return USB_STOR_TRANSPORT_ERROR;
1359
1360         US_DEBUGP("INIT 3\n");
1361
1362         rc = usbat_select_and_test_registers(us);
1363         if (rc != USB_STOR_TRANSPORT_GOOD)
1364                 return rc;
1365
1366         US_DEBUGP("INIT 4\n");
1367
1368         rc = usbat_read_user_io(us, status);
1369         if (rc != USB_STOR_XFER_GOOD)
1370                 return USB_STOR_TRANSPORT_ERROR;
1371
1372         US_DEBUGP("INIT 5\n");
1373
1374         /* Enable peripheral control signals and card detect */
1375         rc = usbat_device_enable_cdt(us);
1376         if (rc != USB_STOR_TRANSPORT_GOOD)
1377                 return rc;
1378
1379         US_DEBUGP("INIT 6\n");
1380
1381         rc = usbat_read_user_io(us, status);
1382         if (rc != USB_STOR_XFER_GOOD)
1383                 return USB_STOR_TRANSPORT_ERROR;
1384
1385         US_DEBUGP("INIT 7\n");
1386
1387         msleep(1400);
1388
1389         rc = usbat_read_user_io(us, status);
1390         if (rc != USB_STOR_XFER_GOOD)
1391                 return USB_STOR_TRANSPORT_ERROR;
1392
1393         US_DEBUGP("INIT 8\n");
1394
1395         rc = usbat_select_and_test_registers(us);
1396         if (rc != USB_STOR_TRANSPORT_GOOD)
1397                 return rc;
1398
1399         US_DEBUGP("INIT 9\n");
1400
1401         /* At this point, we need to detect which device we are using */
1402         if (usbat_set_transport(us, info, devicetype))
1403                 return USB_STOR_TRANSPORT_ERROR;
1404
1405         US_DEBUGP("INIT 10\n");
1406
1407         if (usbat_get_device_type(us) == USBAT_DEV_FLASH) {
1408                 subcountH = 0x02;
1409                 subcountL = 0x00;
1410         }
1411         rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1),
1412                                                                         0x00, 0x88, 0x08, subcountH, subcountL);
1413         if (rc != USB_STOR_XFER_GOOD)
1414                 return USB_STOR_TRANSPORT_ERROR;
1415
1416         US_DEBUGP("INIT 11\n");
1417
1418         return USB_STOR_TRANSPORT_GOOD;
1419 }
1420
1421 /*
1422  * Transport for the HP 8200e
1423  */
1424 static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
1425 {
1426         int result;
1427         unsigned char *status = us->iobuf;
1428         unsigned char registers[32];
1429         unsigned char data[32];
1430         unsigned int len;
1431         int i;
1432
1433         len = scsi_bufflen(srb);
1434
1435         /* Send A0 (ATA PACKET COMMAND).
1436            Note: I guess we're never going to get any of the ATA
1437            commands... just ATA Packet Commands.
1438          */
1439
1440         registers[0] = USBAT_ATA_FEATURES;
1441         registers[1] = USBAT_ATA_SECCNT;
1442         registers[2] = USBAT_ATA_SECNUM;
1443         registers[3] = USBAT_ATA_LBA_ME;
1444         registers[4] = USBAT_ATA_LBA_HI;
1445         registers[5] = USBAT_ATA_DEVICE;
1446         registers[6] = USBAT_ATA_CMD;
1447         data[0] = 0x00;
1448         data[1] = 0x00;
1449         data[2] = 0x00;
1450         data[3] = len&0xFF;             /* (cylL) = expected length (L) */
1451         data[4] = (len>>8)&0xFF;        /* (cylH) = expected length (H) */
1452         data[5] = 0xB0;                 /* (device sel) = slave */
1453         data[6] = 0xA0;                 /* (command) = ATA PACKET COMMAND */
1454
1455         for (i=7; i<19; i++) {
1456                 registers[i] = 0x10;
1457                 data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7];
1458         }
1459
1460         result = usbat_get_status(us, status);
1461         US_DEBUGP("Status = %02X\n", *status);
1462         if (result != USB_STOR_XFER_GOOD)
1463                 return USB_STOR_TRANSPORT_ERROR;
1464         if (srb->cmnd[0] == TEST_UNIT_READY)
1465                 transferred = 0;
1466
1467         if (srb->sc_data_direction == DMA_TO_DEVICE) {
1468
1469                 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
1470                         registers, data, 19,
1471                         USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
1472                         (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
1473                         DMA_TO_DEVICE,
1474                         scsi_sglist(srb),
1475                         len, scsi_sg_count(srb), 10);
1476
1477                 if (result == USB_STOR_TRANSPORT_GOOD) {
1478                         transferred += len;
1479                         US_DEBUGP("Wrote %08X bytes\n", transferred);
1480                 }
1481
1482                 return result;
1483
1484         } else if (srb->cmnd[0] == READ_10 ||
1485                    srb->cmnd[0] == GPCMD_READ_CD) {
1486
1487                 return usbat_hp8200e_handle_read10(us, registers, data, srb);
1488
1489         }
1490
1491         if (len > 0xFFFF) {
1492                 US_DEBUGP("Error: len = %08X... what do I do now?\n",
1493                         len);
1494                 return USB_STOR_TRANSPORT_ERROR;
1495         }
1496
1497         if ( (result = usbat_multiple_write(us,
1498                         registers, data, 7)) != USB_STOR_TRANSPORT_GOOD) {
1499                 return result;
1500         }
1501
1502         /*
1503          * Write the 12-byte command header.
1504          *
1505          * If the command is BLANK then set the timer for 75 minutes.
1506          * Otherwise set it for 10 minutes.
1507          *
1508          * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
1509          * AT SPEED 4 IS UNRELIABLE!!!
1510          */
1511
1512         if ((result = usbat_write_block(us,
1513                         USBAT_ATA, srb->cmnd, 12,
1514                                 (srb->cmnd[0]==GPCMD_BLANK ? 75 : 10), 0) !=
1515                              USB_STOR_TRANSPORT_GOOD)) {
1516                 return result;
1517         }
1518
1519         /* If there is response data to be read in then do it here. */
1520
1521         if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
1522
1523                 /* How many bytes to read in? Check cylL register */
1524
1525                 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
1526                         USB_STOR_XFER_GOOD) {
1527                         return USB_STOR_TRANSPORT_ERROR;
1528                 }
1529
1530                 if (len > 0xFF) { /* need to read cylH also */
1531                         len = *status;
1532                         if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
1533                                     USB_STOR_XFER_GOOD) {
1534                                 return USB_STOR_TRANSPORT_ERROR;
1535                         }
1536                         len += ((unsigned int) *status)<<8;
1537                 }
1538                 else
1539                         len = *status;
1540
1541
1542                 result = usbat_read_block(us, scsi_sglist(srb), len,
1543                                                            scsi_sg_count(srb));
1544         }
1545
1546         return result;
1547 }
1548
1549 /*
1550  * Transport for USBAT02-based CompactFlash and similar storage devices
1551  */
1552 static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
1553 {
1554         int rc;
1555         struct usbat_info *info = (struct usbat_info *) (us->extra);
1556         unsigned long block, blocks;
1557         unsigned char *ptr = us->iobuf;
1558         static unsigned char inquiry_response[36] = {
1559                 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
1560         };
1561
1562         if (srb->cmnd[0] == INQUIRY) {
1563                 US_DEBUGP("usbat_flash_transport: INQUIRY. Returning bogus response.\n");
1564                 memcpy(ptr, inquiry_response, sizeof(inquiry_response));
1565                 fill_inquiry_response(us, ptr, 36);
1566                 return USB_STOR_TRANSPORT_GOOD;
1567         }
1568
1569         if (srb->cmnd[0] == READ_CAPACITY) {
1570                 rc = usbat_flash_check_media(us, info);
1571                 if (rc != USB_STOR_TRANSPORT_GOOD)
1572                         return rc;
1573
1574                 rc = usbat_flash_get_sector_count(us, info);
1575                 if (rc != USB_STOR_TRANSPORT_GOOD)
1576                         return rc;
1577
1578                 /* hard coded 512 byte sectors as per ATA spec */
1579                 info->ssize = 0x200;
1580                 US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
1581                           info->sectors, info->ssize);
1582
1583                 /*
1584                  * build the reply
1585                  * note: must return the sector number of the last sector,
1586                  * *not* the total number of sectors
1587                  */
1588                 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
1589                 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
1590                 usb_stor_set_xfer_buf(ptr, 8, srb);
1591
1592                 return USB_STOR_TRANSPORT_GOOD;
1593         }
1594
1595         if (srb->cmnd[0] == MODE_SELECT_10) {
1596                 US_DEBUGP("usbat_flash_transport:  Gah! MODE_SELECT_10.\n");
1597                 return USB_STOR_TRANSPORT_ERROR;
1598         }
1599
1600         if (srb->cmnd[0] == READ_10) {
1601                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1602                                 ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
1603
1604                 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
1605
1606                 US_DEBUGP("usbat_flash_transport:  READ_10: read block 0x%04lx  count %ld\n", block, blocks);
1607                 return usbat_flash_read_data(us, info, block, blocks);
1608         }
1609
1610         if (srb->cmnd[0] == READ_12) {
1611                 /*
1612                  * I don't think we'll ever see a READ_12 but support it anyway
1613                  */
1614                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1615                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
1616
1617                 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
1618                          ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
1619
1620                 US_DEBUGP("usbat_flash_transport: READ_12: read block 0x%04lx  count %ld\n", block, blocks);
1621                 return usbat_flash_read_data(us, info, block, blocks);
1622         }
1623
1624         if (srb->cmnd[0] == WRITE_10) {
1625                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1626                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
1627
1628                 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
1629
1630                 US_DEBUGP("usbat_flash_transport: WRITE_10: write block 0x%04lx  count %ld\n", block, blocks);
1631                 return usbat_flash_write_data(us, info, block, blocks);
1632         }
1633
1634         if (srb->cmnd[0] == WRITE_12) {
1635                 /*
1636                  * I don't think we'll ever see a WRITE_12 but support it anyway
1637                  */
1638                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1639                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
1640
1641                 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
1642                          ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
1643
1644                 US_DEBUGP("usbat_flash_transport: WRITE_12: write block 0x%04lx  count %ld\n", block, blocks);
1645                 return usbat_flash_write_data(us, info, block, blocks);
1646         }
1647
1648
1649         if (srb->cmnd[0] == TEST_UNIT_READY) {
1650                 US_DEBUGP("usbat_flash_transport: TEST_UNIT_READY.\n");
1651
1652                 rc = usbat_flash_check_media(us, info);
1653                 if (rc != USB_STOR_TRANSPORT_GOOD)
1654                         return rc;
1655
1656                 return usbat_check_status(us);
1657         }
1658
1659         if (srb->cmnd[0] == REQUEST_SENSE) {
1660                 US_DEBUGP("usbat_flash_transport: REQUEST_SENSE.\n");
1661
1662                 memset(ptr, 0, 18);
1663                 ptr[0] = 0xF0;
1664                 ptr[2] = info->sense_key;
1665                 ptr[7] = 11;
1666                 ptr[12] = info->sense_asc;
1667                 ptr[13] = info->sense_ascq;
1668                 usb_stor_set_xfer_buf(ptr, 18, srb);
1669
1670                 return USB_STOR_TRANSPORT_GOOD;
1671         }
1672
1673         if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
1674                 /*
1675                  * sure.  whatever.  not like we can stop the user from popping
1676                  * the media out of the device (no locking doors, etc)
1677                  */
1678                 return USB_STOR_TRANSPORT_GOOD;
1679         }
1680
1681         US_DEBUGP("usbat_flash_transport: Gah! Unknown command: %d (0x%x)\n",
1682                           srb->cmnd[0], srb->cmnd[0]);
1683         info->sense_key = 0x05;
1684         info->sense_asc = 0x20;
1685         info->sense_ascq = 0x00;
1686         return USB_STOR_TRANSPORT_FAILED;
1687 }
1688
1689 int init_usbat_cd(struct us_data *us)
1690 {
1691         return init_usbat(us, USBAT_DEV_HP8200);
1692 }
1693
1694
1695 int init_usbat_flash(struct us_data *us)
1696 {
1697         return init_usbat(us, USBAT_DEV_FLASH);
1698 }
1699
1700 int init_usbat_probe(struct us_data *us)
1701 {
1702         return init_usbat(us, 0);
1703 }
1704
1705 /*
1706  * Default transport function. Attempts to detect which transport function
1707  * should be called, makes it the new default, and calls it.
1708  *
1709  * This function should never be called. Our usbat_init() function detects the
1710  * device type and changes the us->transport ptr to the transport function
1711  * relevant to the device.
1712  * However, we'll support this impossible(?) case anyway.
1713  */
1714 int usbat_transport(struct scsi_cmnd *srb, struct us_data *us)
1715 {
1716         struct usbat_info *info = (struct usbat_info*) (us->extra);
1717
1718         if (usbat_set_transport(us, info, 0))
1719                 return USB_STOR_TRANSPORT_ERROR;
1720
1721         return us->transport(srb, us);
1722 }