git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-pxa/cm-x270.c

   1 /*
   2  * linux/arch/arm/mach-pxa/cm-x270.c
   3  *
   4  * Copyright (C) 2007, 2008 CompuLab, Ltd.
   5  * Mike Rapoport <mike@compulab.co.il>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/platform_device.h>
  13 #include <linux/sysdev.h>
  14 #include <linux/irq.h>
  15 #include <linux/gpio.h>
  16
  17 #include <linux/dm9000.h>
  18 #include <linux/rtc-v3020.h>
  19 #include <video/mbxfb.h>
  20 #include <linux/leds.h>
  21
  22 #include <asm/mach/arch.h>
  23 #include <asm/mach-types.h>
  24 #include <asm/mach/map.h>
  25
  26 #include <asm/arch/pxa2xx-regs.h>
  27 #include <asm/arch/mfp-pxa27x.h>
  28 #include <asm/arch/pxa-regs.h>
  29 #include <asm/arch/audio.h>
  30 #include <asm/arch/pxafb.h>
  31 #include <asm/arch/ohci.h>
  32 #include <asm/arch/mmc.h>
  33 #include <asm/arch/bitfield.h>
  34
  35 #include <asm/hardware/it8152.h>
  36
  37 #include "generic.h"
  38 #include "cm-x270-pci.h"
  39
  40 /* virtual addresses for statically mapped regions */
  41 #define CMX270_VIRT_BASE        (0xe8000000)
  42 #define CMX270_IT8152_VIRT      (CMX270_VIRT_BASE)
  43
  44 #define RTC_PHYS_BASE           (PXA_CS1_PHYS + (5 << 22))
  45 #define DM9000_PHYS_BASE        (PXA_CS1_PHYS + (6 << 22))
  46
  47 /* GPIO IRQ usage */
  48 #define GPIO10_ETHIRQ           (10)
  49 #define GPIO22_IT8152_IRQ       (22)
  50 #define GPIO83_MMC_IRQ          (83)
  51 #define GPIO95_GFXIRQ           (95)
  52
  53 #define CMX270_ETHIRQ           IRQ_GPIO(GPIO10_ETHIRQ)
  54 #define CMX270_IT8152_IRQ       IRQ_GPIO(GPIO22_IT8152_IRQ)
  55 #define CMX270_MMC_IRQ          IRQ_GPIO(GPIO83_MMC_IRQ)
  56 #define CMX270_GFXIRQ           IRQ_GPIO(GPIO95_GFXIRQ)
  57
  58 /* MMC power enable */
  59 #define GPIO105_MMC_POWER       (105)
  60
  61 static unsigned long cmx270_pin_config[] = {
  62         /* AC'97 */
  63         GPIO28_AC97_BITCLK,
  64         GPIO29_AC97_SDATA_IN_0,
  65         GPIO30_AC97_SDATA_OUT,
  66         GPIO31_AC97_SYNC,
  67         GPIO98_AC97_SYSCLK,
  68         GPIO113_AC97_nRESET,
  69
  70         /* BTUART */
  71         GPIO42_BTUART_RXD,
  72         GPIO43_BTUART_TXD,
  73         GPIO44_BTUART_CTS,
  74         GPIO45_BTUART_RTS,
  75
  76         /* STUART */
  77         GPIO46_STUART_RXD,
  78         GPIO47_STUART_TXD,
  79
  80         /* MCI controller */
  81         GPIO32_MMC_CLK,
  82         GPIO112_MMC_CMD,
  83         GPIO92_MMC_DAT_0,
  84         GPIO109_MMC_DAT_1,
  85         GPIO110_MMC_DAT_2,
  86         GPIO111_MMC_DAT_3,
  87
  88         /* LCD */
  89         GPIO58_LCD_LDD_0,
  90         GPIO59_LCD_LDD_1,
  91         GPIO60_LCD_LDD_2,
  92         GPIO61_LCD_LDD_3,
  93         GPIO62_LCD_LDD_4,
  94         GPIO63_LCD_LDD_5,
  95         GPIO64_LCD_LDD_6,
  96         GPIO65_LCD_LDD_7,
  97         GPIO66_LCD_LDD_8,
  98         GPIO67_LCD_LDD_9,
  99         GPIO68_LCD_LDD_10,
 100         GPIO69_LCD_LDD_11,
 101         GPIO70_LCD_LDD_12,
 102         GPIO71_LCD_LDD_13,
 103         GPIO72_LCD_LDD_14,
 104         GPIO73_LCD_LDD_15,
 105         GPIO74_LCD_FCLK,
 106         GPIO75_LCD_LCLK,
 107         GPIO76_LCD_PCLK,
 108         GPIO77_LCD_BIAS,
 109
 110         /* I2C */
 111         GPIO117_I2C_SCL,
 112         GPIO118_I2C_SDA,
 113
 114         /* SSP1 */
 115         GPIO23_SSP1_SCLK,
 116         GPIO24_SSP1_SFRM,
 117         GPIO25_SSP1_TXD,
 118         GPIO26_SSP1_RXD,
 119
 120         /* SSP2 */
 121         GPIO19_SSP2_SCLK,
 122         GPIO14_SSP2_SFRM,
 123         GPIO87_SSP2_TXD,
 124         GPIO88_SSP2_RXD,
 125
 126         /* PC Card */
 127         GPIO48_nPOE,
 128         GPIO49_nPWE,
 129         GPIO50_nPIOR,
 130         GPIO51_nPIOW,
 131         GPIO85_nPCE_1,
 132         GPIO54_nPCE_2,
 133         GPIO55_nPREG,
 134         GPIO56_nPWAIT,
 135         GPIO57_nIOIS16,
 136
 137         /* SDRAM and local bus */
 138         GPIO15_nCS_1,
 139         GPIO78_nCS_2,
 140         GPIO79_nCS_3,
 141         GPIO80_nCS_4,
 142         GPIO33_nCS_5,
 143         GPIO49_nPWE,
 144         GPIO18_RDY,
 145
 146         /* GPIO */
 147         GPIO0_GPIO      | WAKEUP_ON_EDGE_BOTH,
 148         GPIO105_GPIO    | MFP_LPM_DRIVE_HIGH,   /* MMC/SD power */
 149         GPIO53_GPIO,                            /* PC card reset */
 150
 151         /* NAND controls */
 152         GPIO11_GPIO     | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
 153         GPIO89_GPIO,                            /* NAND Ready/Busy */
 154
 155         /* interrupts */
 156         GPIO10_GPIO,    /* DM9000 interrupt */
 157         GPIO83_GPIO,    /* MMC card detect */
 158 };
 159
 160 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 161 static struct resource cmx270_dm9000_resource[] = {
 162         [0] = {
 163                 .start = DM9000_PHYS_BASE,
 164                 .end   = DM9000_PHYS_BASE + 4,
 165                 .flags = IORESOURCE_MEM,
 166         },
 167         [1] = {
 168                 .start = DM9000_PHYS_BASE + 8,
 169                 .end   = DM9000_PHYS_BASE + 8 + 500,
 170                 .flags = IORESOURCE_MEM,
 171         },
 172         [2] = {
 173                 .start = CMX270_ETHIRQ,
 174                 .end   = CMX270_ETHIRQ,
 175                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 176         }
 177 };
 178
 179 static struct dm9000_plat_data cmx270_dm9000_platdata = {
 180         .flags          = DM9000_PLATF_32BITONLY,
 181 };
 182
 183 static struct platform_device cmx270_dm9000_device = {
 184         .name           = "dm9000",
 185         .id             = 0,
 186         .num_resources  = ARRAY_SIZE(cmx270_dm9000_resource),
 187         .resource       = cmx270_dm9000_resource,
 188         .dev            = {
 189                 .platform_data = &cmx270_dm9000_platdata,
 190         }
 191 };
 192
 193 static void __init cmx270_init_dm9000(void)
 194 {
 195         platform_device_register(&cmx270_dm9000_device);
 196 }
 197 #else
 198 static inline void cmx270_init_dm9000(void) {}
 199 #endif
 200
 201 /* UCB1400 touchscreen controller */
 202 #if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 203 static struct platform_device cmx270_ts_device = {
 204         .name           = "ucb1400_ts",
 205         .id             = -1,
 206 };
 207
 208 static void __init cmx270_init_touchscreen(void)
 209 {
 210         platform_device_register(&cmx270_ts_device);
 211 }
 212 #else
 213 static inline void cmx270_init_touchscreen(void) {}
 214 #endif
 215
 216 /* V3020 RTC */
 217 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 218 static struct resource cmx270_v3020_resource[] = {
 219         [0] = {
 220                 .start = RTC_PHYS_BASE,
 221                 .end   = RTC_PHYS_BASE + 4,
 222                 .flags = IORESOURCE_MEM,
 223         },
 224 };
 225
 226 struct v3020_platform_data cmx270_v3020_pdata = {
 227         .leftshift = 16,
 228 };
 229
 230 static struct platform_device cmx270_rtc_device = {
 231         .name           = "v3020",
 232         .num_resources  = ARRAY_SIZE(cmx270_v3020_resource),
 233         .resource       = cmx270_v3020_resource,
 234         .id             = -1,
 235         .dev            = {
 236                 .platform_data = &cmx270_v3020_pdata,
 237         }
 238 };
 239
 240 static void __init cmx270_init_rtc(void)
 241 {
 242         platform_device_register(&cmx270_rtc_device);
 243 }
 244 #else
 245 static inline void cmx270_init_rtc(void) {}
 246 #endif
 247
 248 /* CM-X270 LEDs */
 249 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 250 static struct gpio_led cmx270_leds[] = {
 251         [0] = {
 252                 .name = "cm-x270:red",
 253                 .default_trigger = "nand-disk",
 254                 .gpio = 93,
 255                 .active_low = 1,
 256         },
 257         [1] = {
 258                 .name = "cm-x270:green",
 259                 .default_trigger = "heartbeat",
 260                 .gpio = 94,
 261                 .active_low = 1,
 262         },
 263 };
 264
 265 static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
 266         .num_leds = ARRAY_SIZE(cmx270_leds),
 267         .leds = cmx270_leds,
 268 };
 269
 270 static struct platform_device cmx270_led_device = {
 271         .name           = "leds-gpio",
 272         .id             = -1,
 273         .dev            = {
 274                 .platform_data = &cmx270_gpio_led_pdata,
 275         },
 276 };
 277
 278 static void __init cmx270_init_leds(void)
 279 {
 280         platform_device_register(&cmx270_led_device);
 281 }
 282 #else
 283 static inline void cmx270_init_leds(void) {}
 284 #endif
 285
 286 /* 2700G graphics */
 287 #if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 288 static u64 fb_dma_mask = ~(u64)0;
 289
 290 static struct resource cmx270_2700G_resource[] = {
 291         /* frame buffer memory including ODFB and External SDRAM */
 292         [0] = {
 293                 .start = PXA_CS2_PHYS,
 294                 .end   = PXA_CS2_PHYS + 0x01ffffff,
 295                 .flags = IORESOURCE_MEM,
 296         },
 297         /* Marathon registers */
 298         [1] = {
 299                 .start = PXA_CS2_PHYS + 0x03fe0000,
 300                 .end   = PXA_CS2_PHYS + 0x03ffffff,
 301                 .flags = IORESOURCE_MEM,
 302         },
 303 };
 304
 305 static unsigned long save_lcd_regs[10];
 306
 307 static int cmx270_marathon_probe(struct fb_info *fb)
 308 {
 309         /* save PXA-270 pin settings before enabling 2700G */
 310         save_lcd_regs[0] = GPDR1;
 311         save_lcd_regs[1] = GPDR2;
 312         save_lcd_regs[2] = GAFR1_U;
 313         save_lcd_regs[3] = GAFR2_L;
 314         save_lcd_regs[4] = GAFR2_U;
 315
 316         /* Disable PXA-270 on-chip controller driving pins */
 317         GPDR1 &= ~(0xfc000000);
 318         GPDR2 &= ~(0x00c03fff);
 319         GAFR1_U &= ~(0xfff00000);
 320         GAFR2_L &= ~(0x0fffffff);
 321         GAFR2_U &= ~(0x0000f000);
 322         return 0;
 323 }
 324
 325 static int cmx270_marathon_remove(struct fb_info *fb)
 326 {
 327         GPDR1 =   save_lcd_regs[0];
 328         GPDR2 =   save_lcd_regs[1];
 329         GAFR1_U = save_lcd_regs[2];
 330         GAFR2_L = save_lcd_regs[3];
 331         GAFR2_U = save_lcd_regs[4];
 332         return 0;
 333 }
 334
 335 static struct mbxfb_platform_data cmx270_2700G_data = {
 336         .xres = {
 337                 .min = 240,
 338                 .max = 1200,
 339                 .defval = 640,
 340         },
 341         .yres = {
 342                 .min = 240,
 343                 .max = 1200,
 344                 .defval = 480,
 345         },
 346         .bpp = {
 347                 .min = 16,
 348                 .max = 32,
 349                 .defval = 16,
 350         },
 351         .memsize = 8*1024*1024,
 352         .probe = cmx270_marathon_probe,
 353         .remove = cmx270_marathon_remove,
 354 };
 355
 356 static struct platform_device cmx270_2700G = {
 357         .name           = "mbx-fb",
 358         .dev            = {
 359                 .platform_data  = &cmx270_2700G_data,
 360                 .dma_mask       = &fb_dma_mask,
 361                 .coherent_dma_mask = 0xffffffff,
 362         },
 363         .num_resources  = ARRAY_SIZE(cmx270_2700G_resource),
 364         .resource       = cmx270_2700G_resource,
 365         .id             = -1,
 366 };
 367
 368 static void __init cmx270_init_2700G(void)
 369 {
 370         platform_device_register(&cmx270_2700G);
 371 }
 372 #else
 373 static inline void cmx270_init_2700G(void) {}
 374 #endif
 375
 376 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 377 /*
 378   Display definitions
 379   keep these for backwards compatibility, although symbolic names (as
 380   e.g. in lpd270.c) looks better
 381 */
 382 #define MTYPE_STN320x240        0
 383 #define MTYPE_TFT640x480        1
 384 #define MTYPE_CRT640x480        2
 385 #define MTYPE_CRT800x600        3
 386 #define MTYPE_TFT320x240        6
 387 #define MTYPE_STN640x480        7
 388
 389 static struct pxafb_mode_info generic_stn_320x240_mode = {
 390         .pixclock       = 76923,
 391         .bpp            = 8,
 392         .xres           = 320,
 393         .yres           = 240,
 394         .hsync_len      = 3,
 395         .vsync_len      = 2,
 396         .left_margin    = 3,
 397         .upper_margin   = 0,
 398         .right_margin   = 3,
 399         .lower_margin   = 0,
 400         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 401                            FB_SYNC_VERT_HIGH_ACT),
 402         .cmap_greyscale = 0,
 403 };
 404
 405 static struct pxafb_mach_info generic_stn_320x240 = {
 406         .modes          = &generic_stn_320x240_mode,
 407         .num_modes      = 1,
 408         .lccr0          = 0,
 409         .lccr3          = (LCCR3_PixClkDiv(0x03) |
 410                            LCCR3_Acb(0xff) |
 411                            LCCR3_PCP),
 412         .cmap_inverse   = 0,
 413         .cmap_static    = 0,
 414 };
 415
 416 static struct pxafb_mode_info generic_tft_640x480_mode = {
 417         .pixclock       = 38461,
 418         .bpp            = 8,
 419         .xres           = 640,
 420         .yres           = 480,
 421         .hsync_len      = 60,
 422         .vsync_len      = 2,
 423         .left_margin    = 70,
 424         .upper_margin   = 10,
 425         .right_margin   = 70,
 426         .lower_margin   = 5,
 427         .sync           = 0,
 428         .cmap_greyscale = 0,
 429 };
 430
 431 static struct pxafb_mach_info generic_tft_640x480 = {
 432         .modes          = &generic_tft_640x480_mode,
 433         .num_modes      = 1,
 434         .lccr0          = (LCCR0_PAS),
 435         .lccr3          = (LCCR3_PixClkDiv(0x01) |
 436                            LCCR3_Acb(0xff) |
 437                            LCCR3_PCP),
 438         .cmap_inverse   = 0,
 439         .cmap_static    = 0,
 440 };
 441
 442 static struct pxafb_mode_info generic_crt_640x480_mode = {
 443         .pixclock       = 38461,
 444         .bpp            = 8,
 445         .xres           = 640,
 446         .yres           = 480,
 447         .hsync_len      = 63,
 448         .vsync_len      = 2,
 449         .left_margin    = 81,
 450         .upper_margin   = 33,
 451         .right_margin   = 16,
 452         .lower_margin   = 10,
 453         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 454                            FB_SYNC_VERT_HIGH_ACT),
 455         .cmap_greyscale = 0,
 456 };
 457
 458 static struct pxafb_mach_info generic_crt_640x480 = {
 459         .modes          = &generic_crt_640x480_mode,
 460         .num_modes      = 1,
 461         .lccr0          = (LCCR0_PAS),
 462         .lccr3          = (LCCR3_PixClkDiv(0x01) |
 463                            LCCR3_Acb(0xff)),
 464         .cmap_inverse   = 0,
 465         .cmap_static    = 0,
 466 };
 467
 468 static struct pxafb_mode_info generic_crt_800x600_mode = {
 469         .pixclock       = 28846,
 470         .bpp            = 8,
 471         .xres           = 800,
 472         .yres           = 600,
 473         .hsync_len      = 63,
 474         .vsync_len      = 2,
 475         .left_margin    = 26,
 476         .upper_margin   = 21,
 477         .right_margin   = 26,
 478         .lower_margin   = 11,
 479         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 480                            FB_SYNC_VERT_HIGH_ACT),
 481         .cmap_greyscale = 0,
 482 };
 483
 484 static struct pxafb_mach_info generic_crt_800x600 = {
 485         .modes          = &generic_crt_800x600_mode,
 486         .num_modes      = 1,
 487         .lccr0          = (LCCR0_PAS),
 488         .lccr3          = (LCCR3_PixClkDiv(0x02) |
 489                            LCCR3_Acb(0xff)),
 490         .cmap_inverse   = 0,
 491         .cmap_static    = 0,
 492 };
 493
 494 static struct pxafb_mode_info generic_tft_320x240_mode = {
 495         .pixclock       = 134615,
 496         .bpp            = 16,
 497         .xres           = 320,
 498         .yres           = 240,
 499         .hsync_len      = 63,
 500         .vsync_len      = 7,
 501         .left_margin    = 75,
 502         .upper_margin   = 0,
 503         .right_margin   = 15,
 504         .lower_margin   = 15,
 505         .sync           = 0,
 506         .cmap_greyscale = 0,
 507 };
 508
 509 static struct pxafb_mach_info generic_tft_320x240 = {
 510         .modes          = &generic_tft_320x240_mode,
 511         .num_modes      = 1,
 512         .lccr0          = (LCCR0_PAS),
 513         .lccr3          = (LCCR3_PixClkDiv(0x06) |
 514                            LCCR3_Acb(0xff) |
 515                            LCCR3_PCP),
 516         .cmap_inverse   = 0,
 517         .cmap_static    = 0,
 518 };
 519
 520 static struct pxafb_mode_info generic_stn_640x480_mode = {
 521         .pixclock       = 57692,
 522         .bpp            = 8,
 523         .xres           = 640,
 524         .yres           = 480,
 525         .hsync_len      = 4,
 526         .vsync_len      = 2,
 527         .left_margin    = 10,
 528         .upper_margin   = 5,
 529         .right_margin   = 10,
 530         .lower_margin   = 5,
 531         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 532                            FB_SYNC_VERT_HIGH_ACT),
 533         .cmap_greyscale = 0,
 534 };
 535
 536 static struct pxafb_mach_info generic_stn_640x480 = {
 537         .modes          = &generic_stn_640x480_mode,
 538         .num_modes      = 1,
 539         .lccr0          = 0,
 540         .lccr3          = (LCCR3_PixClkDiv(0x02) |
 541                            LCCR3_Acb(0xff)),
 542         .cmap_inverse   = 0,
 543         .cmap_static    = 0,
 544 };
 545
 546 static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
 547
 548 static int __init cmx270_set_display(char *str)
 549 {
 550         int disp_type = simple_strtol(str, NULL, 0);
 551         switch (disp_type) {
 552         case MTYPE_STN320x240:
 553                 cmx270_display = &generic_stn_320x240;
 554                 break;
 555         case MTYPE_TFT640x480:
 556                 cmx270_display = &generic_tft_640x480;
 557                 break;
 558         case MTYPE_CRT640x480:
 559                 cmx270_display = &generic_crt_640x480;
 560                 break;
 561         case MTYPE_CRT800x600:
 562                 cmx270_display = &generic_crt_800x600;
 563                 break;
 564         case MTYPE_TFT320x240:
 565                 cmx270_display = &generic_tft_320x240;
 566                 break;
 567         case MTYPE_STN640x480:
 568                 cmx270_display = &generic_stn_640x480;
 569                 break;
 570         default: /* fallback to CRT 640x480 */
 571                 cmx270_display = &generic_crt_640x480;
 572                 break;
 573         }
 574         return 1;
 575 }
 576
 577 /*
 578    This should be done really early to get proper configuration for
 579    frame buffer.
 580    Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
 581    has limitied line length for kernel command line, and also it will
 582    break compatibitlty with proprietary releases already in field.
 583 */
 584 __setup("monitor=", cmx270_set_display);
 585
 586 static void __init cmx270_init_display(void)
 587 {
 588         set_pxa_fb_info(cmx270_display);
 589 }
 590 #else
 591 static inline void cmx270_init_display(void) {}
 592 #endif
 593
 594 /* PXA27x OHCI controller setup */
 595 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 596 static int cmx270_ohci_init(struct device *dev)
 597 {
 598         /* Set the Power Control Polarity Low */
 599         UHCHR = (UHCHR | UHCHR_PCPL) &
 600                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
 601
 602         return 0;
 603 }
 604
 605 static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 606         .port_mode      = PMM_PERPORT_MODE,
 607         .init           = cmx270_ohci_init,
 608 };
 609
 610 static void __init cmx270_init_ohci(void)
 611 {
 612         pxa_set_ohci_info(&cmx270_ohci_platform_data);
 613 }
 614 #else
 615 static inline void cmx270_init_ohci(void) {}
 616 #endif
 617
 618 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 619 static int cmx270_mci_init(struct device *dev,
 620                            irq_handler_t cmx270_detect_int,
 621                            void *data)
 622 {
 623         int err;
 624
 625         err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
 626         if (err) {
 627                 dev_warn(dev, "power gpio unavailable\n");
 628                 return err;
 629         }
 630
 631         gpio_direction_output(GPIO105_MMC_POWER, 0);
 632
 633         err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 634                           IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 635                           "MMC card detect", data);
 636         if (err) {
 637                 gpio_free(GPIO105_MMC_POWER);
 638                 dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
 639                         " request MMC card detect IRQ\n");
 640         }
 641
 642         return err;
 643 }
 644
 645 static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 646 {
 647         struct pxamci_platform_data *p_d = dev->platform_data;
 648
 649         if ((1 << vdd) & p_d->ocr_mask) {
 650                 dev_dbg(dev, "power on\n");
 651                 gpio_set_value(GPIO105_MMC_POWER, 0);
 652         } else {
 653                 gpio_set_value(GPIO105_MMC_POWER, 1);
 654                 dev_dbg(dev, "power off\n");
 655         }
 656 }
 657
 658 static void cmx270_mci_exit(struct device *dev, void *data)
 659 {
 660         free_irq(CMX270_MMC_IRQ, data);
 661         gpio_free(GPIO105_MMC_POWER);
 662 }
 663
 664 static struct pxamci_platform_data cmx270_mci_platform_data = {
 665         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 666         .init           = cmx270_mci_init,
 667         .setpower       = cmx270_mci_setpower,
 668         .exit           = cmx270_mci_exit,
 669 };
 670
 671 static void __init cmx270_init_mmc(void)
 672 {
 673         pxa_set_mci_info(&cmx270_mci_platform_data);
 674 }
 675 #else
 676 static inline void cmx270_init_mmc(void) {}
 677 #endif
 678
 679 #ifdef CONFIG_PM
 680 static unsigned long sleep_save_msc[10];
 681
 682 static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
 683 {
 684         cmx270_pci_suspend();
 685
 686         /* save MSC registers */
 687         sleep_save_msc[0] = MSC0;
 688         sleep_save_msc[1] = MSC1;
 689         sleep_save_msc[2] = MSC2;
 690
 691         /* setup power saving mode registers */
 692         PCFR = 0x0;
 693         PSLR = 0xff400000;
 694         PMCR  = 0x00000005;
 695         PWER  = 0x80000000;
 696         PFER  = 0x00000000;
 697         PRER  = 0x00000000;
 698         PGSR0 = 0xC0018800;
 699         PGSR1 = 0x004F0002;
 700         PGSR2 = 0x6021C000;
 701         PGSR3 = 0x00020000;
 702
 703         return 0;
 704 }
 705
 706 static int cmx270_resume(struct sys_device *dev)
 707 {
 708         cmx270_pci_resume();
 709
 710         /* restore MSC registers */
 711         MSC0 = sleep_save_msc[0];
 712         MSC1 = sleep_save_msc[1];
 713         MSC2 = sleep_save_msc[2];
 714
 715         return 0;
 716 }
 717
 718 static struct sysdev_class cmx270_pm_sysclass = {
 719         .name = "pm",
 720         .resume = cmx270_resume,
 721         .suspend = cmx270_suspend,
 722 };
 723
 724 static struct sys_device cmx270_pm_device = {
 725         .cls = &cmx270_pm_sysclass,
 726 };
 727
 728 static int __init cmx270_pm_init(void)
 729 {
 730         int error;
 731         error = sysdev_class_register(&cmx270_pm_sysclass);
 732         if (error == 0)
 733                 error = sysdev_register(&cmx270_pm_device);
 734         return error;
 735 }
 736 #else
 737 static int __init cmx270_pm_init(void) { return 0; }
 738 #endif
 739
 740 #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
 741 static void __init cmx270_init_ac97(void)
 742 {
 743         pxa_set_ac97_info(NULL);
 744 }
 745 #else
 746 static inline void cmx270_init_ac97(void) {}
 747 #endif
 748
 749 static void __init cmx270_init(void)
 750 {
 751         cmx270_pm_init();
 752
 753         pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 754
 755         cmx270_init_dm9000();
 756         cmx270_init_rtc();
 757         cmx270_init_display();
 758         cmx270_init_mmc();
 759         cmx270_init_ohci();
 760         cmx270_init_ac97();
 761         cmx270_init_touchscreen();
 762         cmx270_init_leds();
 763         cmx270_init_2700G();
 764 }
 765
 766 static void __init cmx270_init_irq(void)
 767 {
 768         pxa27x_init_irq();
 769
 770         cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
 771 }
 772
 773 #ifdef CONFIG_PCI
 774 /* Map PCI companion statically */
 775 static struct map_desc cmx270_io_desc[] __initdata = {
 776         [0] = { /* PCI bridge */
 777                 .virtual        = CMX270_IT8152_VIRT,
 778                 .pfn            = __phys_to_pfn(PXA_CS4_PHYS),
 779                 .length         = SZ_64M,
 780                 .type           = MT_DEVICE
 781         },
 782 };
 783
 784 static void __init cmx270_map_io(void)
 785 {
 786         pxa_map_io();
 787         iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 788
 789         it8152_base_address = CMX270_IT8152_VIRT;
 790 }
 791 #else
 792 static void __init cmx270_map_io(void)
 793 {
 794         pxa_map_io();
 795 }
 796 #endif
 797
 798 MACHINE_START(ARMCORE, "Compulab CM-x270")
 799         .boot_params    = 0xa0000100,
 800         .phys_io        = 0x40000000,
 801         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 802         .map_io         = cmx270_map_io,
 803         .init_irq       = cmx270_init_irq,
 804         .timer          = &pxa_timer,
 805         .init_machine   = cmx270_init,
 806 MACHINE_END