2 * proc.c - procfs support for Protocol family CAN core module
4 * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. Neither the name of Volkswagen nor the names of its contributors
16 * may be used to endorse or promote products derived from this software
17 * without specific prior written permission.
19 * Alternatively, provided that this notice is retained in full, this
20 * software may be distributed under the terms of the GNU General
21 * Public License ("GPL") version 2, in which case the provisions of the
22 * GPL apply INSTEAD OF those given above.
24 * The provided data structures and external interfaces from this code
25 * are not restricted to be used by modules with a GPL compatible license.
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
32 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
33 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
37 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
40 * Send feedback to <socketcan-users@lists.berlios.de>
44 #include <linux/module.h>
45 #include <linux/proc_fs.h>
46 #include <linux/list.h>
47 #include <linux/rcupdate.h>
48 #include <linux/can/core.h>
53 * proc filenames for the PF_CAN core
56 #define CAN_PROC_VERSION "version"
57 #define CAN_PROC_STATS "stats"
58 #define CAN_PROC_RESET_STATS "reset_stats"
59 #define CAN_PROC_RCVLIST_ALL "rcvlist_all"
60 #define CAN_PROC_RCVLIST_FIL "rcvlist_fil"
61 #define CAN_PROC_RCVLIST_INV "rcvlist_inv"
62 #define CAN_PROC_RCVLIST_SFF "rcvlist_sff"
63 #define CAN_PROC_RCVLIST_EFF "rcvlist_eff"
64 #define CAN_PROC_RCVLIST_ERR "rcvlist_err"
66 static struct proc_dir_entry *can_dir;
67 static struct proc_dir_entry *pde_version;
68 static struct proc_dir_entry *pde_stats;
69 static struct proc_dir_entry *pde_reset_stats;
70 static struct proc_dir_entry *pde_rcvlist_all;
71 static struct proc_dir_entry *pde_rcvlist_fil;
72 static struct proc_dir_entry *pde_rcvlist_inv;
73 static struct proc_dir_entry *pde_rcvlist_sff;
74 static struct proc_dir_entry *pde_rcvlist_eff;
75 static struct proc_dir_entry *pde_rcvlist_err;
77 static int user_reset;
79 static const char rx_list_name[][8] = {
88 * af_can statistics stuff
91 static void can_init_stats(void)
94 * This memset function is called from a timer context (when
95 * can_stattimer is active which is the default) OR in a process
96 * context (reading the proc_fs when can_stattimer is disabled).
98 memset(&can_stats, 0, sizeof(can_stats));
99 can_stats.jiffies_init = jiffies;
101 can_pstats.stats_reset++;
105 can_pstats.user_reset++;
109 static unsigned long calc_rate(unsigned long oldjif, unsigned long newjif,
114 if (oldjif == newjif)
117 /* see can_stat_update() - this should NEVER happen! */
118 if (count > (ULONG_MAX / HZ)) {
119 printk(KERN_ERR "can: calc_rate: count exceeded! %ld\n",
124 rate = (count * HZ) / (newjif - oldjif);
129 void can_stat_update(unsigned long data)
131 unsigned long j = jiffies; /* snapshot */
133 /* restart counting in timer context on user request */
137 /* restart counting on jiffies overflow */
138 if (j < can_stats.jiffies_init)
141 /* prevent overflow in calc_rate() */
142 if (can_stats.rx_frames > (ULONG_MAX / HZ))
145 /* prevent overflow in calc_rate() */
146 if (can_stats.tx_frames > (ULONG_MAX / HZ))
149 /* matches overflow - very improbable */
150 if (can_stats.matches > (ULONG_MAX / 100))
153 /* calc total values */
154 if (can_stats.rx_frames)
155 can_stats.total_rx_match_ratio = (can_stats.matches * 100) /
158 can_stats.total_tx_rate = calc_rate(can_stats.jiffies_init, j,
159 can_stats.tx_frames);
160 can_stats.total_rx_rate = calc_rate(can_stats.jiffies_init, j,
161 can_stats.rx_frames);
163 /* calc current values */
164 if (can_stats.rx_frames_delta)
165 can_stats.current_rx_match_ratio =
166 (can_stats.matches_delta * 100) /
167 can_stats.rx_frames_delta;
169 can_stats.current_tx_rate = calc_rate(0, HZ, can_stats.tx_frames_delta);
170 can_stats.current_rx_rate = calc_rate(0, HZ, can_stats.rx_frames_delta);
172 /* check / update maximum values */
173 if (can_stats.max_tx_rate < can_stats.current_tx_rate)
174 can_stats.max_tx_rate = can_stats.current_tx_rate;
176 if (can_stats.max_rx_rate < can_stats.current_rx_rate)
177 can_stats.max_rx_rate = can_stats.current_rx_rate;
179 if (can_stats.max_rx_match_ratio < can_stats.current_rx_match_ratio)
180 can_stats.max_rx_match_ratio = can_stats.current_rx_match_ratio;
182 /* clear values for 'current rate' calculation */
183 can_stats.tx_frames_delta = 0;
184 can_stats.rx_frames_delta = 0;
185 can_stats.matches_delta = 0;
187 /* restart timer (one second) */
188 mod_timer(&can_stattimer, round_jiffies(jiffies + HZ));
192 * proc read functions
194 * From known use-cases we expect about 10 entries in a receive list to be
195 * printed in the proc_fs. So PAGE_SIZE is definitely enough space here.
199 static int can_print_rcvlist(char *page, int len, struct hlist_head *rx_list,
200 struct net_device *dev)
203 struct hlist_node *n;
206 hlist_for_each_entry_rcu(r, n, rx_list, list) {
207 char *fmt = (r->can_id & CAN_EFF_FLAG)?
208 " %-5s %08X %08x %08x %08x %8ld %s\n" :
209 " %-5s %03X %08x %08lx %08lx %8ld %s\n";
211 len += snprintf(page + len, PAGE_SIZE - len, fmt,
212 DNAME(dev), r->can_id, r->mask,
213 (unsigned long)r->func, (unsigned long)r->data,
214 r->matches, r->ident);
216 /* does a typical line fit into the current buffer? */
218 /* 100 Bytes before end of buffer */
219 if (len > PAGE_SIZE - 100) {
220 /* mark output cut off */
221 len += snprintf(page + len, PAGE_SIZE - len,
231 static int can_print_recv_banner(char *page, int len)
234 * can1. 00000000 00000000 00000000
237 len += snprintf(page + len, PAGE_SIZE - len,
238 " device can_id can_mask function"
239 " userdata matches ident\n");
244 static int can_proc_read_stats(char *page, char **start, off_t off,
245 int count, int *eof, void *data)
249 len += snprintf(page + len, PAGE_SIZE - len, "\n");
250 len += snprintf(page + len, PAGE_SIZE - len,
251 " %8ld transmitted frames (TXF)\n",
252 can_stats.tx_frames);
253 len += snprintf(page + len, PAGE_SIZE - len,
254 " %8ld received frames (RXF)\n", can_stats.rx_frames);
255 len += snprintf(page + len, PAGE_SIZE - len,
256 " %8ld matched frames (RXMF)\n", can_stats.matches);
258 len += snprintf(page + len, PAGE_SIZE - len, "\n");
260 if (can_stattimer.function == can_stat_update) {
261 len += snprintf(page + len, PAGE_SIZE - len,
262 " %8ld %% total match ratio (RXMR)\n",
263 can_stats.total_rx_match_ratio);
265 len += snprintf(page + len, PAGE_SIZE - len,
266 " %8ld frames/s total tx rate (TXR)\n",
267 can_stats.total_tx_rate);
268 len += snprintf(page + len, PAGE_SIZE - len,
269 " %8ld frames/s total rx rate (RXR)\n",
270 can_stats.total_rx_rate);
272 len += snprintf(page + len, PAGE_SIZE - len, "\n");
274 len += snprintf(page + len, PAGE_SIZE - len,
275 " %8ld %% current match ratio (CRXMR)\n",
276 can_stats.current_rx_match_ratio);
278 len += snprintf(page + len, PAGE_SIZE - len,
279 " %8ld frames/s current tx rate (CTXR)\n",
280 can_stats.current_tx_rate);
281 len += snprintf(page + len, PAGE_SIZE - len,
282 " %8ld frames/s current rx rate (CRXR)\n",
283 can_stats.current_rx_rate);
285 len += snprintf(page + len, PAGE_SIZE - len, "\n");
287 len += snprintf(page + len, PAGE_SIZE - len,
288 " %8ld %% max match ratio (MRXMR)\n",
289 can_stats.max_rx_match_ratio);
291 len += snprintf(page + len, PAGE_SIZE - len,
292 " %8ld frames/s max tx rate (MTXR)\n",
293 can_stats.max_tx_rate);
294 len += snprintf(page + len, PAGE_SIZE - len,
295 " %8ld frames/s max rx rate (MRXR)\n",
296 can_stats.max_rx_rate);
298 len += snprintf(page + len, PAGE_SIZE - len, "\n");
301 len += snprintf(page + len, PAGE_SIZE - len,
302 " %8ld current receive list entries (CRCV)\n",
303 can_pstats.rcv_entries);
304 len += snprintf(page + len, PAGE_SIZE - len,
305 " %8ld maximum receive list entries (MRCV)\n",
306 can_pstats.rcv_entries_max);
308 if (can_pstats.stats_reset)
309 len += snprintf(page + len, PAGE_SIZE - len,
310 "\n %8ld statistic resets (STR)\n",
311 can_pstats.stats_reset);
313 if (can_pstats.user_reset)
314 len += snprintf(page + len, PAGE_SIZE - len,
315 " %8ld user statistic resets (USTR)\n",
316 can_pstats.user_reset);
318 len += snprintf(page + len, PAGE_SIZE - len, "\n");
324 static int can_proc_read_reset_stats(char *page, char **start, off_t off,
325 int count, int *eof, void *data)
331 if (can_stattimer.function == can_stat_update) {
332 len += snprintf(page + len, PAGE_SIZE - len,
333 "Scheduled statistic reset #%ld.\n",
334 can_pstats.stats_reset + 1);
337 if (can_stats.jiffies_init != jiffies)
340 len += snprintf(page + len, PAGE_SIZE - len,
341 "Performed statistic reset #%ld.\n",
342 can_pstats.stats_reset);
349 static int can_proc_read_version(char *page, char **start, off_t off,
350 int count, int *eof, void *data)
354 len += snprintf(page + len, PAGE_SIZE - len, "%s\n",
360 static int can_proc_read_rcvlist(char *page, char **start, off_t off,
361 int count, int *eof, void *data)
363 /* double cast to prevent GCC warning */
364 int idx = (int)(long)data;
366 struct dev_rcv_lists *d;
367 struct hlist_node *n;
369 len += snprintf(page + len, PAGE_SIZE - len,
370 "\nreceive list '%s':\n", rx_list_name[idx]);
373 hlist_for_each_entry_rcu(d, n, &can_rx_dev_list, list) {
375 if (!hlist_empty(&d->rx[idx])) {
376 len = can_print_recv_banner(page, len);
377 len = can_print_rcvlist(page, len, &d->rx[idx], d->dev);
379 len += snprintf(page + len, PAGE_SIZE - len,
380 " (%s: no entry)\n", DNAME(d->dev));
382 /* exit on end of buffer? */
383 if (len > PAGE_SIZE - 100)
388 len += snprintf(page + len, PAGE_SIZE - len, "\n");
394 static int can_proc_read_rcvlist_sff(char *page, char **start, off_t off,
395 int count, int *eof, void *data)
398 struct dev_rcv_lists *d;
399 struct hlist_node *n;
402 len += snprintf(page + len, PAGE_SIZE - len,
403 "\nreceive list 'rx_sff':\n");
406 hlist_for_each_entry_rcu(d, n, &can_rx_dev_list, list) {
407 int i, all_empty = 1;
408 /* check wether at least one list is non-empty */
409 for (i = 0; i < 0x800; i++)
410 if (!hlist_empty(&d->rx_sff[i])) {
416 len = can_print_recv_banner(page, len);
417 for (i = 0; i < 0x800; i++) {
418 if (!hlist_empty(&d->rx_sff[i]) &&
419 len < PAGE_SIZE - 100)
420 len = can_print_rcvlist(page, len,
425 len += snprintf(page + len, PAGE_SIZE - len,
426 " (%s: no entry)\n", DNAME(d->dev));
428 /* exit on end of buffer? */
429 if (len > PAGE_SIZE - 100)
434 len += snprintf(page + len, PAGE_SIZE - len, "\n");
441 * proc utility functions
444 static struct proc_dir_entry *can_create_proc_readentry(const char *name,
446 read_proc_t *read_proc,
450 return create_proc_read_entry(name, mode, can_dir, read_proc,
456 static void can_remove_proc_readentry(const char *name)
459 remove_proc_entry(name, can_dir);
463 * can_init_proc - create main CAN proc directory and procfs entries
465 void can_init_proc(void)
467 /* create /proc/net/can directory */
468 can_dir = proc_mkdir("can", init_net.proc_net);
471 printk(KERN_INFO "can: failed to create /proc/net/can . "
472 "CONFIG_PROC_FS missing?\n");
476 can_dir->owner = THIS_MODULE;
478 /* own procfs entries from the AF_CAN core */
479 pde_version = can_create_proc_readentry(CAN_PROC_VERSION, 0644,
480 can_proc_read_version, NULL);
481 pde_stats = can_create_proc_readentry(CAN_PROC_STATS, 0644,
482 can_proc_read_stats, NULL);
483 pde_reset_stats = can_create_proc_readentry(CAN_PROC_RESET_STATS, 0644,
484 can_proc_read_reset_stats, NULL);
485 pde_rcvlist_err = can_create_proc_readentry(CAN_PROC_RCVLIST_ERR, 0644,
486 can_proc_read_rcvlist, (void *)RX_ERR);
487 pde_rcvlist_all = can_create_proc_readentry(CAN_PROC_RCVLIST_ALL, 0644,
488 can_proc_read_rcvlist, (void *)RX_ALL);
489 pde_rcvlist_fil = can_create_proc_readentry(CAN_PROC_RCVLIST_FIL, 0644,
490 can_proc_read_rcvlist, (void *)RX_FIL);
491 pde_rcvlist_inv = can_create_proc_readentry(CAN_PROC_RCVLIST_INV, 0644,
492 can_proc_read_rcvlist, (void *)RX_INV);
493 pde_rcvlist_eff = can_create_proc_readentry(CAN_PROC_RCVLIST_EFF, 0644,
494 can_proc_read_rcvlist, (void *)RX_EFF);
495 pde_rcvlist_sff = can_create_proc_readentry(CAN_PROC_RCVLIST_SFF, 0644,
496 can_proc_read_rcvlist_sff, NULL);
500 * can_remove_proc - remove procfs entries and main CAN proc directory
502 void can_remove_proc(void)
505 can_remove_proc_readentry(CAN_PROC_VERSION);
508 can_remove_proc_readentry(CAN_PROC_STATS);
511 can_remove_proc_readentry(CAN_PROC_RESET_STATS);
514 can_remove_proc_readentry(CAN_PROC_RCVLIST_ERR);
517 can_remove_proc_readentry(CAN_PROC_RCVLIST_ALL);
520 can_remove_proc_readentry(CAN_PROC_RCVLIST_FIL);
523 can_remove_proc_readentry(CAN_PROC_RCVLIST_INV);
526 can_remove_proc_readentry(CAN_PROC_RCVLIST_EFF);
529 can_remove_proc_readentry(CAN_PROC_RCVLIST_SFF);
532 proc_net_remove(&init_net, "can");