Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
[linux-2.6] / drivers / acpi / acpica / evgpeblk.c
1 /******************************************************************************
2  *
3  * Module Name: evgpeblk - GPE block creation and initialization.
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2008, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acevents.h"
47 #include "acnamesp.h"
48
49 #define _COMPONENT          ACPI_EVENTS
50 ACPI_MODULE_NAME("evgpeblk")
51
52 /* Local prototypes */
53 static acpi_status
54 acpi_ev_save_method_info(acpi_handle obj_handle,
55                          u32 level, void *obj_desc, void **return_value);
56
57 static acpi_status
58 acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
59                           u32 level, void *info, void **return_value);
60
61 static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
62                                                                interrupt_number);
63
64 static acpi_status
65 acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt);
66
67 static acpi_status
68 acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
69                           u32 interrupt_number);
70
71 static acpi_status
72 acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block);
73
74 /*******************************************************************************
75  *
76  * FUNCTION:    acpi_ev_valid_gpe_event
77  *
78  * PARAMETERS:  gpe_event_info              - Info for this GPE
79  *
80  * RETURN:      TRUE if the gpe_event is valid
81  *
82  * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL.
83  *              Should be called only when the GPE lists are semaphore locked
84  *              and not subject to change.
85  *
86  ******************************************************************************/
87
88 u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info)
89 {
90         struct acpi_gpe_xrupt_info *gpe_xrupt_block;
91         struct acpi_gpe_block_info *gpe_block;
92
93         ACPI_FUNCTION_ENTRY();
94
95         /* No need for spin lock since we are not changing any list elements */
96
97         /* Walk the GPE interrupt levels */
98
99         gpe_xrupt_block = acpi_gbl_gpe_xrupt_list_head;
100         while (gpe_xrupt_block) {
101                 gpe_block = gpe_xrupt_block->gpe_block_list_head;
102
103                 /* Walk the GPE blocks on this interrupt level */
104
105                 while (gpe_block) {
106                         if ((&gpe_block->event_info[0] <= gpe_event_info) &&
107                             (&gpe_block->event_info[((acpi_size)
108                                                      gpe_block->
109                                                      register_count) * 8] >
110                              gpe_event_info)) {
111                                 return (TRUE);
112                         }
113
114                         gpe_block = gpe_block->next;
115                 }
116
117                 gpe_xrupt_block = gpe_xrupt_block->next;
118         }
119
120         return (FALSE);
121 }
122
123 /*******************************************************************************
124  *
125  * FUNCTION:    acpi_ev_walk_gpe_list
126  *
127  * PARAMETERS:  gpe_walk_callback   - Routine called for each GPE block
128  *              Context             - Value passed to callback
129  *
130  * RETURN:      Status
131  *
132  * DESCRIPTION: Walk the GPE lists.
133  *
134  ******************************************************************************/
135
136 acpi_status
137 acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context)
138 {
139         struct acpi_gpe_block_info *gpe_block;
140         struct acpi_gpe_xrupt_info *gpe_xrupt_info;
141         acpi_status status = AE_OK;
142         acpi_cpu_flags flags;
143
144         ACPI_FUNCTION_TRACE(ev_walk_gpe_list);
145
146         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
147
148         /* Walk the interrupt level descriptor list */
149
150         gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
151         while (gpe_xrupt_info) {
152
153                 /* Walk all Gpe Blocks attached to this interrupt level */
154
155                 gpe_block = gpe_xrupt_info->gpe_block_list_head;
156                 while (gpe_block) {
157
158                         /* One callback per GPE block */
159
160                         status =
161                             gpe_walk_callback(gpe_xrupt_info, gpe_block,
162                                               context);
163                         if (ACPI_FAILURE(status)) {
164                                 if (status == AE_CTRL_END) {    /* Callback abort */
165                                         status = AE_OK;
166                                 }
167                                 goto unlock_and_exit;
168                         }
169
170                         gpe_block = gpe_block->next;
171                 }
172
173                 gpe_xrupt_info = gpe_xrupt_info->next;
174         }
175
176       unlock_and_exit:
177         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
178         return_ACPI_STATUS(status);
179 }
180
181 /*******************************************************************************
182  *
183  * FUNCTION:    acpi_ev_delete_gpe_handlers
184  *
185  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
186  *              gpe_block           - Gpe Block info
187  *
188  * RETURN:      Status
189  *
190  * DESCRIPTION: Delete all Handler objects found in the GPE data structs.
191  *              Used only prior to termination.
192  *
193  ******************************************************************************/
194
195 acpi_status
196 acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
197                             struct acpi_gpe_block_info *gpe_block,
198                             void *context)
199 {
200         struct acpi_gpe_event_info *gpe_event_info;
201         u32 i;
202         u32 j;
203
204         ACPI_FUNCTION_TRACE(ev_delete_gpe_handlers);
205
206         /* Examine each GPE Register within the block */
207
208         for (i = 0; i < gpe_block->register_count; i++) {
209
210                 /* Now look at the individual GPEs in this byte register */
211
212                 for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
213                         gpe_event_info = &gpe_block->event_info[((acpi_size) i *
214                                                                  ACPI_GPE_REGISTER_WIDTH)
215                                                                 + j];
216
217                         if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
218                             ACPI_GPE_DISPATCH_HANDLER) {
219                                 ACPI_FREE(gpe_event_info->dispatch.handler);
220                                 gpe_event_info->dispatch.handler = NULL;
221                                 gpe_event_info->flags &=
222                                     ~ACPI_GPE_DISPATCH_MASK;
223                         }
224                 }
225         }
226
227         return_ACPI_STATUS(AE_OK);
228 }
229
230 /*******************************************************************************
231  *
232  * FUNCTION:    acpi_ev_save_method_info
233  *
234  * PARAMETERS:  Callback from walk_namespace
235  *
236  * RETURN:      Status
237  *
238  * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
239  *              control method under the _GPE portion of the namespace.
240  *              Extract the name and GPE type from the object, saving this
241  *              information for quick lookup during GPE dispatch
242  *
243  *              The name of each GPE control method is of the form:
244  *              "_Lxx" or "_Exx"
245  *              Where:
246  *                  L      - means that the GPE is level triggered
247  *                  E      - means that the GPE is edge triggered
248  *                  xx     - is the GPE number [in HEX]
249  *
250  ******************************************************************************/
251
252 static acpi_status
253 acpi_ev_save_method_info(acpi_handle obj_handle,
254                          u32 level, void *obj_desc, void **return_value)
255 {
256         struct acpi_gpe_block_info *gpe_block = (void *)obj_desc;
257         struct acpi_gpe_event_info *gpe_event_info;
258         u32 gpe_number;
259         char name[ACPI_NAME_SIZE + 1];
260         u8 type;
261         acpi_status status;
262
263         ACPI_FUNCTION_TRACE(ev_save_method_info);
264
265         /*
266          * _Lxx and _Exx GPE method support
267          *
268          * 1) Extract the name from the object and convert to a string
269          */
270         ACPI_MOVE_32_TO_32(name,
271                            &((struct acpi_namespace_node *)obj_handle)->name.
272                            integer);
273         name[ACPI_NAME_SIZE] = 0;
274
275         /*
276          * 2) Edge/Level determination is based on the 2nd character
277          *    of the method name
278          *
279          * NOTE: Default GPE type is RUNTIME. May be changed later to WAKE
280          * if a _PRW object is found that points to this GPE.
281          */
282         switch (name[1]) {
283         case 'L':
284                 type = ACPI_GPE_LEVEL_TRIGGERED;
285                 break;
286
287         case 'E':
288                 type = ACPI_GPE_EDGE_TRIGGERED;
289                 break;
290
291         default:
292                 /* Unknown method type, just ignore it! */
293
294                 ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
295                                   "Ignoring unknown GPE method type: %s "
296                                   "(name not of form _Lxx or _Exx)", name));
297                 return_ACPI_STATUS(AE_OK);
298         }
299
300         /* Convert the last two characters of the name to the GPE Number */
301
302         gpe_number = ACPI_STRTOUL(&name[2], NULL, 16);
303         if (gpe_number == ACPI_UINT32_MAX) {
304
305                 /* Conversion failed; invalid method, just ignore it */
306
307                 ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
308                                   "Could not extract GPE number from name: %s "
309                                   "(name is not of form _Lxx or _Exx)", name));
310                 return_ACPI_STATUS(AE_OK);
311         }
312
313         /* Ensure that we have a valid GPE number for this GPE block */
314
315         if ((gpe_number < gpe_block->block_base_number) ||
316             (gpe_number >= (gpe_block->block_base_number +
317                             (gpe_block->register_count * 8)))) {
318                 /*
319                  * Not valid for this GPE block, just ignore it. However, it may be
320                  * valid for a different GPE block, since GPE0 and GPE1 methods both
321                  * appear under \_GPE.
322                  */
323                 return_ACPI_STATUS(AE_OK);
324         }
325
326         /*
327          * Now we can add this information to the gpe_event_info block for use
328          * during dispatch of this GPE. Default type is RUNTIME, although this may
329          * change when the _PRW methods are executed later.
330          */
331         gpe_event_info =
332             &gpe_block->event_info[gpe_number - gpe_block->block_base_number];
333
334         gpe_event_info->flags = (u8)
335             (type | ACPI_GPE_DISPATCH_METHOD | ACPI_GPE_TYPE_RUNTIME);
336
337         gpe_event_info->dispatch.method_node =
338             (struct acpi_namespace_node *)obj_handle;
339
340         /* Update enable mask, but don't enable the HW GPE as of yet */
341
342         status = acpi_ev_enable_gpe(gpe_event_info, FALSE);
343
344         ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
345                           "Registered GPE method %s as GPE number 0x%.2X\n",
346                           name, gpe_number));
347         return_ACPI_STATUS(status);
348 }
349
350 /*******************************************************************************
351  *
352  * FUNCTION:    acpi_ev_match_prw_and_gpe
353  *
354  * PARAMETERS:  Callback from walk_namespace
355  *
356  * RETURN:      Status. NOTE: We ignore errors so that the _PRW walk is
357  *              not aborted on a single _PRW failure.
358  *
359  * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
360  *              Device. Run the _PRW method. If present, extract the GPE
361  *              number and mark the GPE as a WAKE GPE.
362  *
363  ******************************************************************************/
364
365 static acpi_status
366 acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
367                           u32 level, void *info, void **return_value)
368 {
369         struct acpi_gpe_walk_info *gpe_info = (void *)info;
370         struct acpi_namespace_node *gpe_device;
371         struct acpi_gpe_block_info *gpe_block;
372         struct acpi_namespace_node *target_gpe_device;
373         struct acpi_gpe_event_info *gpe_event_info;
374         union acpi_operand_object *pkg_desc;
375         union acpi_operand_object *obj_desc;
376         u32 gpe_number;
377         acpi_status status;
378
379         ACPI_FUNCTION_TRACE(ev_match_prw_and_gpe);
380
381         /* Check for a _PRW method under this device */
382
383         status = acpi_ut_evaluate_object(obj_handle, METHOD_NAME__PRW,
384                                          ACPI_BTYPE_PACKAGE, &pkg_desc);
385         if (ACPI_FAILURE(status)) {
386
387                 /* Ignore all errors from _PRW, we don't want to abort the subsystem */
388
389                 return_ACPI_STATUS(AE_OK);
390         }
391
392         /* The returned _PRW package must have at least two elements */
393
394         if (pkg_desc->package.count < 2) {
395                 goto cleanup;
396         }
397
398         /* Extract pointers from the input context */
399
400         gpe_device = gpe_info->gpe_device;
401         gpe_block = gpe_info->gpe_block;
402
403         /*
404          * The _PRW object must return a package, we are only interested in the
405          * first element
406          */
407         obj_desc = pkg_desc->package.elements[0];
408
409         if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
410
411                 /* Use FADT-defined GPE device (from definition of _PRW) */
412
413                 target_gpe_device = acpi_gbl_fadt_gpe_device;
414
415                 /* Integer is the GPE number in the FADT described GPE blocks */
416
417                 gpe_number = (u32) obj_desc->integer.value;
418         } else if (obj_desc->common.type == ACPI_TYPE_PACKAGE) {
419
420                 /* Package contains a GPE reference and GPE number within a GPE block */
421
422                 if ((obj_desc->package.count < 2) ||
423                     ((obj_desc->package.elements[0])->common.type !=
424                      ACPI_TYPE_LOCAL_REFERENCE) ||
425                     ((obj_desc->package.elements[1])->common.type !=
426                      ACPI_TYPE_INTEGER)) {
427                         goto cleanup;
428                 }
429
430                 /* Get GPE block reference and decode */
431
432                 target_gpe_device =
433                     obj_desc->package.elements[0]->reference.node;
434                 gpe_number = (u32) obj_desc->package.elements[1]->integer.value;
435         } else {
436                 /* Unknown type, just ignore it */
437
438                 goto cleanup;
439         }
440
441         /*
442          * Is this GPE within this block?
443          *
444          * TRUE if and only if these conditions are true:
445          *     1) The GPE devices match.
446          *     2) The GPE index(number) is within the range of the Gpe Block
447          *          associated with the GPE device.
448          */
449         if ((gpe_device == target_gpe_device) &&
450             (gpe_number >= gpe_block->block_base_number) &&
451             (gpe_number < gpe_block->block_base_number +
452              (gpe_block->register_count * 8))) {
453                 gpe_event_info = &gpe_block->event_info[gpe_number -
454                                                         gpe_block->
455                                                         block_base_number];
456
457                 /* Mark GPE for WAKE-ONLY but WAKE_DISABLED */
458
459                 gpe_event_info->flags &=
460                     ~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED);
461
462                 status =
463                     acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
464                 if (ACPI_FAILURE(status)) {
465                         goto cleanup;
466                 }
467
468                 status =
469                     acpi_ev_update_gpe_enable_masks(gpe_event_info,
470                                                     ACPI_GPE_DISABLE);
471         }
472
473       cleanup:
474         acpi_ut_remove_reference(pkg_desc);
475         return_ACPI_STATUS(AE_OK);
476 }
477
478 /*******************************************************************************
479  *
480  * FUNCTION:    acpi_ev_get_gpe_xrupt_block
481  *
482  * PARAMETERS:  interrupt_number     - Interrupt for a GPE block
483  *
484  * RETURN:      A GPE interrupt block
485  *
486  * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt
487  *              block per unique interrupt level used for GPEs. Should be
488  *              called only when the GPE lists are semaphore locked and not
489  *              subject to change.
490  *
491  ******************************************************************************/
492
493 static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
494                                                                interrupt_number)
495 {
496         struct acpi_gpe_xrupt_info *next_gpe_xrupt;
497         struct acpi_gpe_xrupt_info *gpe_xrupt;
498         acpi_status status;
499         acpi_cpu_flags flags;
500
501         ACPI_FUNCTION_TRACE(ev_get_gpe_xrupt_block);
502
503         /* No need for lock since we are not changing any list elements here */
504
505         next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
506         while (next_gpe_xrupt) {
507                 if (next_gpe_xrupt->interrupt_number == interrupt_number) {
508                         return_PTR(next_gpe_xrupt);
509                 }
510
511                 next_gpe_xrupt = next_gpe_xrupt->next;
512         }
513
514         /* Not found, must allocate a new xrupt descriptor */
515
516         gpe_xrupt = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_xrupt_info));
517         if (!gpe_xrupt) {
518                 return_PTR(NULL);
519         }
520
521         gpe_xrupt->interrupt_number = interrupt_number;
522
523         /* Install new interrupt descriptor with spin lock */
524
525         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
526         if (acpi_gbl_gpe_xrupt_list_head) {
527                 next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
528                 while (next_gpe_xrupt->next) {
529                         next_gpe_xrupt = next_gpe_xrupt->next;
530                 }
531
532                 next_gpe_xrupt->next = gpe_xrupt;
533                 gpe_xrupt->previous = next_gpe_xrupt;
534         } else {
535                 acpi_gbl_gpe_xrupt_list_head = gpe_xrupt;
536         }
537         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
538
539         /* Install new interrupt handler if not SCI_INT */
540
541         if (interrupt_number != acpi_gbl_FADT.sci_interrupt) {
542                 status = acpi_os_install_interrupt_handler(interrupt_number,
543                                                            acpi_ev_gpe_xrupt_handler,
544                                                            gpe_xrupt);
545                 if (ACPI_FAILURE(status)) {
546                         ACPI_ERROR((AE_INFO,
547                                     "Could not install GPE interrupt handler at level 0x%X",
548                                     interrupt_number));
549                         return_PTR(NULL);
550                 }
551         }
552
553         return_PTR(gpe_xrupt);
554 }
555
556 /*******************************************************************************
557  *
558  * FUNCTION:    acpi_ev_delete_gpe_xrupt
559  *
560  * PARAMETERS:  gpe_xrupt       - A GPE interrupt info block
561  *
562  * RETURN:      Status
563  *
564  * DESCRIPTION: Remove and free a gpe_xrupt block. Remove an associated
565  *              interrupt handler if not the SCI interrupt.
566  *
567  ******************************************************************************/
568
569 static acpi_status
570 acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
571 {
572         acpi_status status;
573         acpi_cpu_flags flags;
574
575         ACPI_FUNCTION_TRACE(ev_delete_gpe_xrupt);
576
577         /* We never want to remove the SCI interrupt handler */
578
579         if (gpe_xrupt->interrupt_number == acpi_gbl_FADT.sci_interrupt) {
580                 gpe_xrupt->gpe_block_list_head = NULL;
581                 return_ACPI_STATUS(AE_OK);
582         }
583
584         /* Disable this interrupt */
585
586         status =
587             acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
588                                              acpi_ev_gpe_xrupt_handler);
589         if (ACPI_FAILURE(status)) {
590                 return_ACPI_STATUS(status);
591         }
592
593         /* Unlink the interrupt block with lock */
594
595         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
596         if (gpe_xrupt->previous) {
597                 gpe_xrupt->previous->next = gpe_xrupt->next;
598         } else {
599                 /* No previous, update list head */
600
601                 acpi_gbl_gpe_xrupt_list_head = gpe_xrupt->next;
602         }
603
604         if (gpe_xrupt->next) {
605                 gpe_xrupt->next->previous = gpe_xrupt->previous;
606         }
607         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
608
609         /* Free the block */
610
611         ACPI_FREE(gpe_xrupt);
612         return_ACPI_STATUS(AE_OK);
613 }
614
615 /*******************************************************************************
616  *
617  * FUNCTION:    acpi_ev_install_gpe_block
618  *
619  * PARAMETERS:  gpe_block               - New GPE block
620  *              interrupt_number        - Xrupt to be associated with this
621  *                                        GPE block
622  *
623  * RETURN:      Status
624  *
625  * DESCRIPTION: Install new GPE block with mutex support
626  *
627  ******************************************************************************/
628
629 static acpi_status
630 acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
631                           u32 interrupt_number)
632 {
633         struct acpi_gpe_block_info *next_gpe_block;
634         struct acpi_gpe_xrupt_info *gpe_xrupt_block;
635         acpi_status status;
636         acpi_cpu_flags flags;
637
638         ACPI_FUNCTION_TRACE(ev_install_gpe_block);
639
640         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
641         if (ACPI_FAILURE(status)) {
642                 return_ACPI_STATUS(status);
643         }
644
645         gpe_xrupt_block = acpi_ev_get_gpe_xrupt_block(interrupt_number);
646         if (!gpe_xrupt_block) {
647                 status = AE_NO_MEMORY;
648                 goto unlock_and_exit;
649         }
650
651         /* Install the new block at the end of the list with lock */
652
653         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
654         if (gpe_xrupt_block->gpe_block_list_head) {
655                 next_gpe_block = gpe_xrupt_block->gpe_block_list_head;
656                 while (next_gpe_block->next) {
657                         next_gpe_block = next_gpe_block->next;
658                 }
659
660                 next_gpe_block->next = gpe_block;
661                 gpe_block->previous = next_gpe_block;
662         } else {
663                 gpe_xrupt_block->gpe_block_list_head = gpe_block;
664         }
665
666         gpe_block->xrupt_block = gpe_xrupt_block;
667         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
668
669       unlock_and_exit:
670         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
671         return_ACPI_STATUS(status);
672 }
673
674 /*******************************************************************************
675  *
676  * FUNCTION:    acpi_ev_delete_gpe_block
677  *
678  * PARAMETERS:  gpe_block           - Existing GPE block
679  *
680  * RETURN:      Status
681  *
682  * DESCRIPTION: Remove a GPE block
683  *
684  ******************************************************************************/
685
686 acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block)
687 {
688         acpi_status status;
689         acpi_cpu_flags flags;
690
691         ACPI_FUNCTION_TRACE(ev_install_gpe_block);
692
693         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
694         if (ACPI_FAILURE(status)) {
695                 return_ACPI_STATUS(status);
696         }
697
698         /* Disable all GPEs in this block */
699
700         status =
701             acpi_hw_disable_gpe_block(gpe_block->xrupt_block, gpe_block, NULL);
702
703         if (!gpe_block->previous && !gpe_block->next) {
704
705                 /* This is the last gpe_block on this interrupt */
706
707                 status = acpi_ev_delete_gpe_xrupt(gpe_block->xrupt_block);
708                 if (ACPI_FAILURE(status)) {
709                         goto unlock_and_exit;
710                 }
711         } else {
712                 /* Remove the block on this interrupt with lock */
713
714                 flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
715                 if (gpe_block->previous) {
716                         gpe_block->previous->next = gpe_block->next;
717                 } else {
718                         gpe_block->xrupt_block->gpe_block_list_head =
719                             gpe_block->next;
720                 }
721
722                 if (gpe_block->next) {
723                         gpe_block->next->previous = gpe_block->previous;
724                 }
725                 acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
726         }
727
728         acpi_current_gpe_count -=
729             gpe_block->register_count * ACPI_GPE_REGISTER_WIDTH;
730
731         /* Free the gpe_block */
732
733         ACPI_FREE(gpe_block->register_info);
734         ACPI_FREE(gpe_block->event_info);
735         ACPI_FREE(gpe_block);
736
737       unlock_and_exit:
738         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
739         return_ACPI_STATUS(status);
740 }
741
742 /*******************************************************************************
743  *
744  * FUNCTION:    acpi_ev_create_gpe_info_blocks
745  *
746  * PARAMETERS:  gpe_block   - New GPE block
747  *
748  * RETURN:      Status
749  *
750  * DESCRIPTION: Create the register_info and event_info blocks for this GPE block
751  *
752  ******************************************************************************/
753
754 static acpi_status
755 acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
756 {
757         struct acpi_gpe_register_info *gpe_register_info = NULL;
758         struct acpi_gpe_event_info *gpe_event_info = NULL;
759         struct acpi_gpe_event_info *this_event;
760         struct acpi_gpe_register_info *this_register;
761         u32 i;
762         u32 j;
763         acpi_status status;
764
765         ACPI_FUNCTION_TRACE(ev_create_gpe_info_blocks);
766
767         /* Allocate the GPE register information block */
768
769         gpe_register_info = ACPI_ALLOCATE_ZEROED((acpi_size) gpe_block->
770                                                  register_count *
771                                                  sizeof(struct
772                                                         acpi_gpe_register_info));
773         if (!gpe_register_info) {
774                 ACPI_ERROR((AE_INFO,
775                             "Could not allocate the GpeRegisterInfo table"));
776                 return_ACPI_STATUS(AE_NO_MEMORY);
777         }
778
779         /*
780          * Allocate the GPE event_info block. There are eight distinct GPEs
781          * per register. Initialization to zeros is sufficient.
782          */
783         gpe_event_info = ACPI_ALLOCATE_ZEROED(((acpi_size) gpe_block->
784                                                register_count *
785                                                ACPI_GPE_REGISTER_WIDTH) *
786                                               sizeof(struct
787                                                      acpi_gpe_event_info));
788         if (!gpe_event_info) {
789                 ACPI_ERROR((AE_INFO,
790                             "Could not allocate the GpeEventInfo table"));
791                 status = AE_NO_MEMORY;
792                 goto error_exit;
793         }
794
795         /* Save the new Info arrays in the GPE block */
796
797         gpe_block->register_info = gpe_register_info;
798         gpe_block->event_info = gpe_event_info;
799
800         /*
801          * Initialize the GPE Register and Event structures. A goal of these
802          * tables is to hide the fact that there are two separate GPE register
803          * sets in a given GPE hardware block, the status registers occupy the
804          * first half, and the enable registers occupy the second half.
805          */
806         this_register = gpe_register_info;
807         this_event = gpe_event_info;
808
809         for (i = 0; i < gpe_block->register_count; i++) {
810
811                 /* Init the register_info for this GPE register (8 GPEs) */
812
813                 this_register->base_gpe_number =
814                     (u8) (gpe_block->block_base_number +
815                           (i * ACPI_GPE_REGISTER_WIDTH));
816
817                 this_register->status_address.address =
818                     gpe_block->block_address.address + i;
819
820                 this_register->enable_address.address =
821                     gpe_block->block_address.address + i +
822                     gpe_block->register_count;
823
824                 this_register->status_address.space_id =
825                     gpe_block->block_address.space_id;
826                 this_register->enable_address.space_id =
827                     gpe_block->block_address.space_id;
828                 this_register->status_address.bit_width =
829                     ACPI_GPE_REGISTER_WIDTH;
830                 this_register->enable_address.bit_width =
831                     ACPI_GPE_REGISTER_WIDTH;
832                 this_register->status_address.bit_offset = 0;
833                 this_register->enable_address.bit_offset = 0;
834
835                 /* Init the event_info for each GPE within this register */
836
837                 for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
838                         this_event->gpe_number =
839                             (u8) (this_register->base_gpe_number + j);
840                         this_event->register_info = this_register;
841                         this_event++;
842                 }
843
844                 /* Disable all GPEs within this register */
845
846                 status = acpi_write(0x00, &this_register->enable_address);
847                 if (ACPI_FAILURE(status)) {
848                         goto error_exit;
849                 }
850
851                 /* Clear any pending GPE events within this register */
852
853                 status = acpi_write(0xFF, &this_register->status_address);
854                 if (ACPI_FAILURE(status)) {
855                         goto error_exit;
856                 }
857
858                 this_register++;
859         }
860
861         return_ACPI_STATUS(AE_OK);
862
863       error_exit:
864         if (gpe_register_info) {
865                 ACPI_FREE(gpe_register_info);
866         }
867         if (gpe_event_info) {
868                 ACPI_FREE(gpe_event_info);
869         }
870
871         return_ACPI_STATUS(status);
872 }
873
874 /*******************************************************************************
875  *
876  * FUNCTION:    acpi_ev_create_gpe_block
877  *
878  * PARAMETERS:  gpe_device          - Handle to the parent GPE block
879  *              gpe_block_address   - Address and space_iD
880  *              register_count      - Number of GPE register pairs in the block
881  *              gpe_block_base_number - Starting GPE number for the block
882  *              interrupt_number    - H/W interrupt for the block
883  *              return_gpe_block    - Where the new block descriptor is returned
884  *
885  * RETURN:      Status
886  *
887  * DESCRIPTION: Create and Install a block of GPE registers. All GPEs within
888  *              the block are disabled at exit.
889  *              Note: Assumes namespace is locked.
890  *
891  ******************************************************************************/
892
893 acpi_status
894 acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
895                          struct acpi_generic_address *gpe_block_address,
896                          u32 register_count,
897                          u8 gpe_block_base_number,
898                          u32 interrupt_number,
899                          struct acpi_gpe_block_info **return_gpe_block)
900 {
901         acpi_status status;
902         struct acpi_gpe_block_info *gpe_block;
903
904         ACPI_FUNCTION_TRACE(ev_create_gpe_block);
905
906         if (!register_count) {
907                 return_ACPI_STATUS(AE_OK);
908         }
909
910         /* Allocate a new GPE block */
911
912         gpe_block = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_block_info));
913         if (!gpe_block) {
914                 return_ACPI_STATUS(AE_NO_MEMORY);
915         }
916
917         /* Initialize the new GPE block */
918
919         gpe_block->node = gpe_device;
920         gpe_block->register_count = register_count;
921         gpe_block->block_base_number = gpe_block_base_number;
922
923         ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address,
924                     sizeof(struct acpi_generic_address));
925
926         /*
927          * Create the register_info and event_info sub-structures
928          * Note: disables and clears all GPEs in the block
929          */
930         status = acpi_ev_create_gpe_info_blocks(gpe_block);
931         if (ACPI_FAILURE(status)) {
932                 ACPI_FREE(gpe_block);
933                 return_ACPI_STATUS(status);
934         }
935
936         /* Install the new block in the global lists */
937
938         status = acpi_ev_install_gpe_block(gpe_block, interrupt_number);
939         if (ACPI_FAILURE(status)) {
940                 ACPI_FREE(gpe_block);
941                 return_ACPI_STATUS(status);
942         }
943
944         /* Find all GPE methods (_Lxx, _Exx) for this block */
945
946         status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device,
947                                         ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK,
948                                         acpi_ev_save_method_info, gpe_block,
949                                         NULL);
950
951         /* Return the new block */
952
953         if (return_gpe_block) {
954                 (*return_gpe_block) = gpe_block;
955         }
956
957         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
958                           "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n",
959                           (u32) gpe_block->block_base_number,
960                           (u32) (gpe_block->block_base_number +
961                                  ((gpe_block->register_count *
962                                    ACPI_GPE_REGISTER_WIDTH) - 1)),
963                           gpe_device->name.ascii, gpe_block->register_count,
964                           interrupt_number));
965
966         /* Update global count of currently available GPEs */
967
968         acpi_current_gpe_count += register_count * ACPI_GPE_REGISTER_WIDTH;
969         return_ACPI_STATUS(AE_OK);
970 }
971
972 /*******************************************************************************
973  *
974  * FUNCTION:    acpi_ev_initialize_gpe_block
975  *
976  * PARAMETERS:  gpe_device          - Handle to the parent GPE block
977  *              gpe_block           - Gpe Block info
978  *
979  * RETURN:      Status
980  *
981  * DESCRIPTION: Initialize and enable a GPE block. First find and run any
982  *              _PRT methods associated with the block, then enable the
983  *              appropriate GPEs.
984  *              Note: Assumes namespace is locked.
985  *
986  ******************************************************************************/
987
988 acpi_status
989 acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
990                              struct acpi_gpe_block_info *gpe_block)
991 {
992         acpi_status status;
993         struct acpi_gpe_event_info *gpe_event_info;
994         struct acpi_gpe_walk_info gpe_info;
995         u32 wake_gpe_count;
996         u32 gpe_enabled_count;
997         u32 i;
998         u32 j;
999
1000         ACPI_FUNCTION_TRACE(ev_initialize_gpe_block);
1001
1002         /* Ignore a null GPE block (e.g., if no GPE block 1 exists) */
1003
1004         if (!gpe_block) {
1005                 return_ACPI_STATUS(AE_OK);
1006         }
1007
1008         /*
1009          * Runtime option: Should wake GPEs be enabled at runtime?  The default
1010          * is no, they should only be enabled just as the machine goes to sleep.
1011          */
1012         if (acpi_gbl_leave_wake_gpes_disabled) {
1013                 /*
1014                  * Differentiate runtime vs wake GPEs, via the _PRW control methods.
1015                  * Each GPE that has one or more _PRWs that reference it is by
1016                  * definition a wake GPE and will not be enabled while the machine
1017                  * is running.
1018                  */
1019                 gpe_info.gpe_block = gpe_block;
1020                 gpe_info.gpe_device = gpe_device;
1021
1022                 status =
1023                     acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
1024                                            ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK,
1025                                            acpi_ev_match_prw_and_gpe, &gpe_info,
1026                                            NULL);
1027         }
1028
1029         /*
1030          * Enable all GPEs in this block that have these attributes:
1031          * 1) are "runtime" or "run/wake" GPEs, and
1032          * 2) have a corresponding _Lxx or _Exx method
1033          *
1034          * Any other GPEs within this block must be enabled via the
1035          * acpi_enable_gpe() external interface.
1036          */
1037         wake_gpe_count = 0;
1038         gpe_enabled_count = 0;
1039
1040         for (i = 0; i < gpe_block->register_count; i++) {
1041                 for (j = 0; j < 8; j++) {
1042
1043                         /* Get the info block for this particular GPE */
1044
1045                         gpe_event_info = &gpe_block->event_info[((acpi_size) i *
1046                                                                  ACPI_GPE_REGISTER_WIDTH)
1047                                                                 + j];
1048
1049                         if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
1050                              ACPI_GPE_DISPATCH_METHOD) &&
1051                             (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) {
1052                                 gpe_enabled_count++;
1053                         }
1054
1055                         if (gpe_event_info->flags & ACPI_GPE_TYPE_WAKE) {
1056                                 wake_gpe_count++;
1057                         }
1058                 }
1059         }
1060
1061         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
1062                           "Found %u Wake, Enabled %u Runtime GPEs in this block\n",
1063                           wake_gpe_count, gpe_enabled_count));
1064
1065         /* Enable all valid runtime GPEs found above */
1066
1067         status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block, NULL);
1068         if (ACPI_FAILURE(status)) {
1069                 ACPI_ERROR((AE_INFO, "Could not enable GPEs in GpeBlock %p",
1070                             gpe_block));
1071         }
1072
1073         return_ACPI_STATUS(status);
1074 }
1075
1076 /*******************************************************************************
1077  *
1078  * FUNCTION:    acpi_ev_gpe_initialize
1079  *
1080  * PARAMETERS:  None
1081  *
1082  * RETURN:      Status
1083  *
1084  * DESCRIPTION: Initialize the GPE data structures
1085  *
1086  ******************************************************************************/
1087
1088 acpi_status acpi_ev_gpe_initialize(void)
1089 {
1090         u32 register_count0 = 0;
1091         u32 register_count1 = 0;
1092         u32 gpe_number_max = 0;
1093         acpi_status status;
1094
1095         ACPI_FUNCTION_TRACE(ev_gpe_initialize);
1096
1097         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
1098         if (ACPI_FAILURE(status)) {
1099                 return_ACPI_STATUS(status);
1100         }
1101
1102         /*
1103          * Initialize the GPE Block(s) defined in the FADT
1104          *
1105          * Why the GPE register block lengths are divided by 2:  From the ACPI
1106          * Spec, section "General-Purpose Event Registers", we have:
1107          *
1108          * "Each register block contains two registers of equal length
1109          *  GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
1110          *  GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
1111          *  The length of the GPE1_STS and GPE1_EN registers is equal to
1112          *  half the GPE1_LEN. If a generic register block is not supported
1113          *  then its respective block pointer and block length values in the
1114          *  FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
1115          *  to be the same size."
1116          */
1117
1118         /*
1119          * Determine the maximum GPE number for this machine.
1120          *
1121          * Note: both GPE0 and GPE1 are optional, and either can exist without
1122          * the other.
1123          *
1124          * If EITHER the register length OR the block address are zero, then that
1125          * particular block is not supported.
1126          */
1127         if (acpi_gbl_FADT.gpe0_block_length &&
1128             acpi_gbl_FADT.xgpe0_block.address) {
1129
1130                 /* GPE block 0 exists (has both length and address > 0) */
1131
1132                 register_count0 = (u16) (acpi_gbl_FADT.gpe0_block_length / 2);
1133
1134                 gpe_number_max =
1135                     (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
1136
1137                 /* Install GPE Block 0 */
1138
1139                 status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
1140                                                   &acpi_gbl_FADT.xgpe0_block,
1141                                                   register_count0, 0,
1142                                                   acpi_gbl_FADT.sci_interrupt,
1143                                                   &acpi_gbl_gpe_fadt_blocks[0]);
1144
1145                 if (ACPI_FAILURE(status)) {
1146                         ACPI_EXCEPTION((AE_INFO, status,
1147                                         "Could not create GPE Block 0"));
1148                 }
1149         }
1150
1151         if (acpi_gbl_FADT.gpe1_block_length &&
1152             acpi_gbl_FADT.xgpe1_block.address) {
1153
1154                 /* GPE block 1 exists (has both length and address > 0) */
1155
1156                 register_count1 = (u16) (acpi_gbl_FADT.gpe1_block_length / 2);
1157
1158                 /* Check for GPE0/GPE1 overlap (if both banks exist) */
1159
1160                 if ((register_count0) &&
1161                     (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
1162                         ACPI_ERROR((AE_INFO,
1163                                     "GPE0 block (GPE 0 to %d) overlaps the GPE1 block "
1164                                     "(GPE %d to %d) - Ignoring GPE1",
1165                                     gpe_number_max, acpi_gbl_FADT.gpe1_base,
1166                                     acpi_gbl_FADT.gpe1_base +
1167                                     ((register_count1 *
1168                                       ACPI_GPE_REGISTER_WIDTH) - 1)));
1169
1170                         /* Ignore GPE1 block by setting the register count to zero */
1171
1172                         register_count1 = 0;
1173                 } else {
1174                         /* Install GPE Block 1 */
1175
1176                         status =
1177                             acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
1178                                                      &acpi_gbl_FADT.xgpe1_block,
1179                                                      register_count1,
1180                                                      acpi_gbl_FADT.gpe1_base,
1181                                                      acpi_gbl_FADT.
1182                                                      sci_interrupt,
1183                                                      &acpi_gbl_gpe_fadt_blocks
1184                                                      [1]);
1185
1186                         if (ACPI_FAILURE(status)) {
1187                                 ACPI_EXCEPTION((AE_INFO, status,
1188                                                 "Could not create GPE Block 1"));
1189                         }
1190
1191                         /*
1192                          * GPE0 and GPE1 do not have to be contiguous in the GPE number
1193                          * space. However, GPE0 always starts at GPE number zero.
1194                          */
1195                         gpe_number_max = acpi_gbl_FADT.gpe1_base +
1196                             ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
1197                 }
1198         }
1199
1200         /* Exit if there are no GPE registers */
1201
1202         if ((register_count0 + register_count1) == 0) {
1203
1204                 /* GPEs are not required by ACPI, this is OK */
1205
1206                 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
1207                                   "There are no GPE blocks defined in the FADT\n"));
1208                 status = AE_OK;
1209                 goto cleanup;
1210         }
1211
1212         /* Check for Max GPE number out-of-range */
1213
1214         if (gpe_number_max > ACPI_GPE_MAX) {
1215                 ACPI_ERROR((AE_INFO,
1216                             "Maximum GPE number from FADT is too large: 0x%X",
1217                             gpe_number_max));
1218                 status = AE_BAD_VALUE;
1219                 goto cleanup;
1220         }
1221
1222       cleanup:
1223         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
1224         return_ACPI_STATUS(AE_OK);
1225 }