1 # For a description of the syntax of this configuration file,
2 # see Documentation/kbuild/kconfig-language.txt.
5 mainmenu "Linux/PowerPC Kernel Configuration"
14 config GENERIC_HARDIRQS
18 config RWSEM_GENERIC_SPINLOCK
21 config RWSEM_XCHGADD_ALGORITHM
25 config GENERIC_CALIBRATE_DELAY
41 # All PPCs use generic nvram driver through ppc_md
46 config SCHED_NO_NO_OMIT_FRAME_POINTER
55 prompt "Processor Type"
59 bool "6xx/7xx/74xx/52xx/82xx/83xx"
62 There are four types of PowerPC chips supported. The more common
63 types (601, 603, 604, 740, 750, 7400), the Motorola embedded
64 versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded
65 versions (403 and 405) and the high end 64 bit Power processors
66 (POWER 3, POWER4, and IBM 970 also known as G5)
67 Unless you are building a kernel for one of the embedded processor
68 systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
69 Note that the kernel runs in 32-bit mode even on 64-bit chips.
70 Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
71 specific support for that chipset is asked later on.
85 bool "POWER4 and 970 (G5)"
111 depends on 44x || E500
113 default y if E500 && PHYS_64BIT
116 bool 'Large physical address support' if E500
117 depends on 44x || E500
120 This option enables kernel support for larger than 32-bit physical
121 addresses. This features is not be available on all e500 cores.
123 If in doubt, say N here.
126 bool "AltiVec Support"
127 depends on 6xx || POWER4
128 depends on !8260 && !83xx
130 This option enables kernel support for the Altivec extensions to the
131 PowerPC processor. The kernel currently supports saving and restoring
132 altivec registers, and turning on the 'altivec enable' bit so user
133 processes can execute altivec instructions.
135 This option is only usefully if you have a processor that supports
136 altivec (G4, otherwise known as 74xx series), but does not have
137 any affect on a non-altivec cpu (it does, however add code to the
140 If in doubt, say Y here.
146 This option enables kernel support for the Signal Processing
147 Extensions (SPE) to the PowerPC processor. The kernel currently
148 supports saving and restoring SPE registers, and turning on the
149 'spe enable' bit so user processes can execute SPE instructions.
151 This option is only usefully if you have a processor that supports
152 SPE (e500, otherwise known as 85xx series), but does not have any
153 affect on a non-spe cpu (it does, however add code to the kernel).
155 If in doubt, say Y here.
158 bool "Thermal Management Support"
159 depends on 6xx && !8260 && !83xx
161 G3 and G4 processors have an on-chip temperature sensor called the
162 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
163 temperature within 2-4 degrees Celsius. This option shows the current
164 on-die temperature in /proc/cpuinfo if the cpu supports it.
166 Unfortunately, on some chip revisions, this sensor is very inaccurate
167 and in some cases, does not work at all, so don't assume the cpu
168 temp is actually what /proc/cpuinfo says it is.
171 bool "Interrupt driven TAU driver (DANGEROUS)"
174 The TAU supports an interrupt driven mode which causes an interrupt
175 whenever the temperature goes out of range. This is the fastest way
176 to get notified the temp has exceeded a range. With this option off,
177 a timer is used to re-check the temperature periodically.
179 However, on some cpus it appears that the TAU interrupt hardware
180 is buggy and can cause a situation which would lead unexplained hard
183 Unless you are extending the TAU driver, or enjoy kernel/hardware
184 debugging, leave this option off.
187 bool "Average high and low temp"
190 The TAU hardware can compare the temperature to an upper and lower
191 bound. The default behavior is to show both the upper and lower
192 bound in /proc/cpuinfo. If the range is large, the temperature is
193 either changing a lot, or the TAU hardware is broken (likely on some
194 G4's). If the range is small (around 4 degrees), the temperature is
195 relatively stable. If you say Y here, a single temperature value,
196 halfway between the upper and lower bounds, will be reported in
199 If in doubt, say N here.
201 config MATH_EMULATION
202 bool "Math emulation"
203 depends on 4xx || 8xx || E500
205 Some PowerPC chips designed for embedded applications do not have
206 a floating-point unit and therefore do not implement the
207 floating-point instructions in the PowerPC instruction set. If you
208 say Y here, the kernel will include code to emulate a floating-point
209 unit, which will allow programs that use floating-point
212 If you have an Apple machine or an IBM RS/6000 or pSeries machine,
213 or any machine with a 6xx, 7xx or 7xxx series processor, say N
214 here. Saying Y here will not hurt performance (on any machine) but
215 will increase the size of the kernel.
217 source "drivers/cpufreq/Kconfig"
220 bool "Support for Apple PowerBooks"
221 depends on CPU_FREQ && ADB_PMU
222 select CPU_FREQ_TABLE
224 This adds support for frequency switching on Apple PowerBooks,
225 this currently includes some models of iBook & Titanium
228 config PPC601_SYNC_FIX
229 bool "Workarounds for PPC601 bugs"
230 depends on 6xx && (PPC_PREP || PPC_PMAC)
232 Some versions of the PPC601 (the first PowerPC chip) have bugs which
233 mean that extra synchronization instructions are required near
234 certain instructions, typically those that make major changes to the
235 CPU state. These extra instructions reduce performance slightly.
236 If you say N here, these extra instructions will not be included,
237 resulting in a kernel which will run faster but may not run at all
238 on some systems with the PPC601 chip.
240 If in doubt, say Y here.
242 source arch/ppc/platforms/4xx/Kconfig
243 source arch/ppc/platforms/85xx/Kconfig
247 depends on POWER3 || POWER4
252 depends on 6xx || POWER3 || POWER4
255 config NOT_COHERENT_CACHE
257 depends on 4xx || 8xx
262 menu "Platform options"
265 prompt "8xx Machine Type"
272 Single-board computers based around the PowerPC MPC8xx chips and
273 intended for embedded applications. The following types are
277 Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
280 Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
284 Bright Star Engineering ip-Engine.
290 MPC8xx based family of mini modules, half credit card size,
291 up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
292 2 x CAN bus interface, ...
293 Manufacturer: TQ Components, www.tq-group.de
294 Date of Release: October (?) 1999
295 End of Life: not yet :-)
297 - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
298 - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
299 - images: <http://www.denx.de/embedded-ppc-en.html>
302 FingerPrint Sensor System (based on TQM850L)
303 Manufacturer: IKENDI AG, <http://www.ikendi.com/>
304 Date of Release: November 1999
305 End of life: end 2000 ?
309 MPC823 based board used in the "Tele Server" product
310 Manufacturer: Speech Design, <http://www.speech-design.de/>
311 Date of Release: Mid 2000 (?)
313 URL: <http://www.speech-design.de/>
314 select "English", then "Teleteam Solutions", then "TeleServer"
317 MPC860 based board used in the "Integrated Voice Mail System",
318 Small Version (8 voice channels)
319 Manufacturer: Speech Design, <http://www.speech-design.de/>
320 Date of Release: December 2000 (?)
322 URL: <http://www.speech-design.de/>
325 MPC860 based board used in the "Integrated Voice Mail System",
326 Large Version (24 voice channels)
327 Manufacturer: Speech Design, <http://www.speech-design.de/>
328 Date of Release: March 2001 (?)
330 URL: <http://www.speech-design.de/>
333 Service Module (based on TQM850L)
334 Manufacturer: Dependable Computer Systems, <http://www.decomsys.com/>
335 Date of Release: end 2000 (?)
336 End of life: mid 2001 (?)
337 URL: <http://www.tz-mikroelektronik.de/ServiceModule/index.html>
340 Hermes-Pro ISDN/LAN router with integrated 8 x hub
341 Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
342 <http://www.multidata.de/>
343 Date of Release: 2000 (?)
345 URL: <http://www.multidata.de/english/products/hpro.htm>
348 VMEBus IP (Industry Pack) carrier board with MPC860
349 Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
352 URL: <http://www.microsys.de/html/ip860.html>
355 PCU = Peripheral Controller Unit, Extended
356 Manufacturer: Siemens AG, ICN (Information and Communication Networks)
357 <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
358 Date of Release: April 2001
359 End of life: August 2001
365 The RPX-Classic is a single-board computer based on the Motorola
366 MPC860. It features 16MB of DRAM and a variable amount of flash,
367 I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
368 LEDs. Variants with Ethernet ports exist. Say Y here to support it
374 Say Y here to support the Bright Star Engineering ipEngine SBC.
375 This is a credit-card-sized device featuring a MPC823 processor,
376 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
377 controller, and two RS232 ports.
385 Say Y here to support the TQM823L, one of an MPC8xx-based family of
386 mini SBCs (half credit-card size) from TQ Components first released
387 in late 1999. Technical references are at
388 <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
389 <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
390 <http://www.denx.de/embedded-ppc-en.html>.
395 Say Y here to support the TQM850L, one of an MPC8xx-based family of
396 mini SBCs (half credit-card size) from TQ Components first released
397 in late 1999. Technical references are at
398 <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
399 <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
400 <http://www.denx.de/embedded-ppc-en.html>.
405 Say Y here to support the TQM855L, one of an MPC8xx-based family of
406 mini SBCs (half credit-card size) from TQ Components first released
407 in late 1999. Technical references are at
408 <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
409 <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
410 <http://www.denx.de/embedded-ppc-en.html>.
415 Say Y here to support the TQM860L, one of an MPC8xx-based family of
416 mini SBCs (half credit-card size) from TQ Components first released
417 in late 1999. Technical references are at
418 <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
419 <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
420 <http://www.denx.de/embedded-ppc-en.html>.
428 Say Y here to support the Speech Design 823 Tele-Server from Speech
429 Design, released in 2000. The manufacturer's website is at
430 <http://www.speech-design.de/>.
435 Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
436 from Speech Design, released March 2001. The manufacturer's website
437 is at <http://www.speech-design.de/>.
442 Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
443 from Speech Design, released March 2001. The manufacturer's website
444 is at <http://www.speech-design.de/>.
449 Say Y here to support the Service Module 850 from Dependable
450 Computer Systems, an SBC based on the TQM850L module by TQ
451 Components. This board is no longer in production. The
452 manufacturer's website is at <http://www.decomsys.com/>.
475 MBX is a line of Motorola single-board computer based around the
476 MPC821 and MPC860 processors, and intended for embedded-controller
477 applications. Say Y here to support these boards directly.
482 The Wincept 100/110 is a Motorola single-board computer based on the
483 MPC821 PowerPC, introduced in 1998 and designed to be used in
484 thin-client machines. Say Y to support it directly.
489 prompt "Machine Type"
490 depends on 6xx || POWER3 || POWER4
491 default PPC_MULTIPLATFORM
493 Linux currently supports several different kinds of PowerPC-based
494 machines: Apple Power Macintoshes and clones (such as the Motorola
495 Starmax series), PReP (PowerPC Reference Platform) machines (such
496 as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
497 and some IBM RS/6000 systems), CHRP (Common Hardware Reference
498 Platform) machines (including all of the recent IBM RS/6000 and
499 pSeries machines), and several embedded PowerPC systems containing
500 4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
501 default option is to build a kernel which works on the first three.
503 Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or
504 pSeries machine, a Power Macintosh (including iMacs, iBooks and
505 Powerbooks), or a PReP machine.
507 Select Gemini if configuring for a Synergy Microsystems' Gemini
508 series Single Board Computer. More information is available at:
509 <http://www.synergymicro.com/PressRel/97_10_15.html>.
511 Select APUS if configuring for a PowerUP Amiga. More information is
512 available at: <http://linux-apus.sourceforge.net/>.
514 config PPC_MULTIPLATFORM
515 bool "CHRP/PowerMac/PReP"
520 Select APUS if configuring for a PowerUP Amiga.
521 More information is available at:
522 <http://linux-apus.sourceforge.net/>.
525 bool "Artesyn-Katana"
527 Select KATANA if configuring an Artesyn KATANA 750i or 3750
536 Select CPCI690 if configuring a Force CPCI690 cPCI board.
539 bool "Force-PowerCore"
542 bool "Force-PowerPMC250"
545 bool "IBM 750FX Eval board or 750GX Eval board"
547 Select CHESTNUT if configuring an IBM 750FX Eval Board or a
548 IBM 750GX Eval board.
556 Select HDPU if configuring a Sky Computers Compute Blade.
560 tristate "HDPU-Features"
562 Select to enable HDPU enhanced features.
565 bool "Marvell-EV64260BP"
567 Select EV64260 if configuring a Marvell (formerly Galileo)
568 EV64260BP Evaluation platform.
571 bool "Motorola-LoPEC"
574 bool "Motorola-MCPN765"
577 bool "Motorola-MVME5100"
580 bool "Motorola-PowerPlus"
583 bool "Motorola-PrPMC750"
586 bool "Motorola-PrPMC800"
589 bool "Motorola-Sandpoint"
591 Select SANDPOINT if configuring for a Motorola Sandpoint X3
594 config RADSTONE_PPC7D
595 bool "Radstone Technology PPC7D board"
598 bool "SBS-Adirondack"
607 bool "Synergy-Gemini"
609 Select Gemini if configuring for a Synergy Microsystems' Gemini
610 series Single Board Computer. More information is available at:
611 <http://www.synergymicro.com/PressRel/97_10_15.html>.
616 The EST8260 is a single-board computer manufactured by Wind River
617 Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
618 the MPC8260. Wind River Systems has a website at
619 <http://www.windriver.com/>, but the EST8260 cannot be found on it
620 and has probably been discontinued or rebadged.
625 SBC PowerQUICC II, single-board computer with MPC82xx CPU
626 Manufacturer: Wind River Systems, Inc.
627 Date of Release: May 2003
629 URL: <http://www.windriver.com/>
640 MPC8260 based module, little larger than credit card,
641 up to 128 MB global + 64 MB local RAM, 32 MB Flash,
642 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
643 2 x serial ports, ...
644 Manufacturer: TQ Components, www.tq-group.de
645 Date of Release: June 2001
646 End of Life: not yet :-)
647 URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
653 bool "Freescale-PQ2FADS"
655 Select PQ2FADS if you wish to configure for a Freescale
656 PQ2FADS board (-VR or -ZU).
659 bool "Freescale LITE5200 / (IceCube)"
662 Support for the LITE5200 dev board for the MPC5200 from Freescale.
663 This is for the LITE5200 version 2.0 board. Don't know if it changes
664 much but it's only been tested on this board version. I think this
665 board is also known as IceCube.
668 bool "Freescale MPC834x SYS"
670 This option enables support for the MPC 834x SYS evaluation board.
681 depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L || SM850)
686 depends on 8xx || 8260
693 bool "CPM2 Support" if WILLOW
695 default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
697 The MPC8260 is a typical embedded CPU made by Motorola. Selecting
698 this option means that you wish to build a kernel for a machine with
707 The MPC8272 CPM has a different internal dpram setup than other CPM2
712 default y if MPC834x_SYS
716 default y if MPC834x_SYS
720 depends on 8260 || MPC8560 || MPC8555
723 The CPM2 (Communications Processor Module) is a coprocessor on
724 embedded CPUs made by Motorola. Selecting this option means that
725 you wish to build a kernel for a machine with a CPM2 coprocessor
726 on it (826x, 827x, 8560).
730 depends on PPC_MULTIPLATFORM
735 depends on PPC_MULTIPLATFORM
740 depends on PPC_PMAC && POWER4
745 depends on PPC_MULTIPLATFORM
750 depends on PPC_PMAC || PPC_CHRP
755 depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \
756 PRPMC750 || K2 || PRPMC800 || LOPEC || \
757 (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
763 depends on 6xx && (PCORE || POWERPMC250)
768 depends on EV64260 || CPCI690
771 config MV64360 # Really MV64360 & MV64460
773 depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU
778 depends on (GT64260 || MV64360)
781 menu "Set bridge options"
784 config NOT_COHERENT_CACHE
785 bool "Turn off Cache Coherency"
788 Some 64x60 bridges lock up when trying to enforce cache coherency.
789 When this option is selected, cache coherency will be turned off.
790 Note that this can cause other problems (e.g., stale data being
791 speculatively loaded via a cached mapping). Use at your own risk.
794 hex "Set bridge base used by firmware"
797 A firmware can leave the base address of the bridge's registers at
798 a non-standard location. If so, set this value to reflect the
799 address of that non-standard location.
801 config MV64X60_NEW_BASE
802 hex "Set bridge base used by kernel"
805 If the current base address of the bridge's registers is not where
806 you want it, set this value to the address that you want it moved to.
810 config NONMONARCH_SUPPORT
811 bool "Enable Non-Monarch Support"
819 config EPIC_SERIAL_MODE
821 depends on 6xx && (LOPEC || SANDPOINT)
826 depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
829 config MPC10X_OPENPIC
831 depends on POWERPMC250 || LOPEC || SANDPOINT
834 config MPC10X_STORE_GATHERING
835 bool "Enable MPC10x store gathering"
836 depends on MPC10X_BRIDGE
838 config CPC710_DATA_GATHERING
839 bool "Enable CPC710 data gathering"
842 config HARRIER_STORE_GATHERING
843 bool "Enable Harrier store gathering"
846 config MVME5100_IPMC761_PRESENT
847 bool "MVME5100 configured with an IPMC761"
850 config SPRUCE_BAUD_33M
851 bool "Spruce baud clock support"
855 bool "PC PS/2 style Keyboard"
856 depends on 4xx || CPM2
859 bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
860 default y if PPC_PREP
863 bool "Symmetric multi-processing support"
865 This enables support for systems with more than one CPU. If you have
866 a system with only one CPU, say N. If you have a system with more
867 than one CPU, say Y. Note that the kernel does not currently
868 support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
869 since they have inadequate hardware support for multiprocessor
872 If you say N here, the kernel will run on single and multiprocessor
873 machines, but will use only one CPU of a multiprocessor machine. If
874 you say Y here, the kernel will run on single-processor machines.
875 On a single-processor machine, the kernel will run faster if you say
878 If you don't know what to do here, say N.
881 bool "Distribute interrupts on all CPUs by default"
884 This option gives the kernel permission to distribute IRQs across
885 multiple CPUs. Saying N here will route all IRQs to the first
886 CPU. Generally saying Y is safe, although some problems have been
887 reported with SMP Power Macintoshes with this option enabled.
890 int "Maximum number of CPUs (2-32)"
896 bool "Preemptible Kernel"
898 This option reduces the latency of the kernel when reacting to
899 real-time or interactive events by allowing a low priority process to
900 be preempted even if it is in kernel mode executing a system call.
902 Say Y here if you are building a kernel for a desktop, embedded
903 or real-time system. Say N if you are unsure.
906 bool "High memory support"
908 source "fs/Kconfig.binfmt"
910 config PROC_DEVICETREE
911 bool "Support for Open Firmware device tree in /proc"
912 depends on PPC_OF && PROC_FS
914 This option adds a device-tree directory under /proc which contains
915 an image of the device tree that the kernel copies from Open
916 Firmware. If unsure, say Y here.
919 bool "Support for PReP Residual Data"
922 Some PReP systems have residual data passed to the kernel by the
923 firmware. This allows detection of memory size, devices present and
924 other useful pieces of information. Sometimes this information is
925 not present or incorrect, in which case it could lead to the machine
926 behaving incorrectly. If this happens, either disable PREP_RESIDUAL
927 or pass the 'noresidual' option to the kernel.
929 If you are running a PReP system, say Y here, otherwise say N.
931 config PROC_PREPRESIDUAL
932 bool "Support for reading of PReP Residual Data in /proc"
933 depends on PREP_RESIDUAL && PROC_FS
935 Enabling this option will create a /proc/residual file which allows
936 you to get at the residual data on PReP systems. You will need a tool
937 (lsresidual) to parse it. If you aren't on a PReP system, you don't
941 bool "Default bootloader kernel arguments"
944 string "Initial kernel command string"
945 depends on CMDLINE_BOOL
946 default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
948 On some platforms, there is currently no way for the boot loader to
949 pass arguments to the kernel. For these platforms, you can supply
950 some command-line options at build time by entering them here. In
951 most cases you will need to specify the root device here.
958 This option enables support for the Amiga series of computers.
965 This enables support for the Zorro bus in the Amiga. If you have
966 expansion cards in your Amiga that conform to the Amiga
967 AutoConfig(tm) specification, say Y, otherwise N. Note that even
968 expansion cards that do not fit in the Zorro slots but fit in e.g.
969 the CPU slot may fall in this category, so you have to say Y to let
972 config ABSTRACT_CONSOLE
977 config APUS_FAST_EXCEPT
983 bool "Amiga 1200/600 PCMCIA support"
984 depends on APUS && EXPERIMENTAL
986 Include support in the kernel for pcmcia on Amiga 1200 and Amiga
987 600. If you intend to use pcmcia cards say Y; otherwise say N.
989 config AMIGA_BUILTIN_SERIAL
990 tristate "Amiga builtin serial support"
993 If you want to use your Amiga's built-in serial port in Linux,
996 To compile this driver as a module, choose M here.
999 tristate "GVP IO-Extender support"
1002 If you want to use a GVP IO-Extender serial card in Linux, say Y.
1006 tristate "GVP IO-Extender parallel printer support"
1009 Say Y to enable driving a printer from the parallel port on your
1010 GVP IO-Extender card, N otherwise.
1012 config GVPIOEXT_PLIP
1013 tristate "GVP IO-Extender PLIP support"
1016 Say Y to enable doing IP over the parallel port on your GVP
1017 IO-Extender card, N otherwise.
1019 config MULTIFACE_III_TTY
1020 tristate "Multiface Card III serial support"
1023 If you want to use a Multiface III card's serial port in Linux,
1026 To compile this driver as a module, choose M here.
1029 tristate "Commodore A2232 serial support (EXPERIMENTAL)"
1030 depends on EXPERIMENTAL && APUS
1032 This option supports the 2232 7-port serial card shipped with the
1033 Amiga 2000 and other Zorro-bus machines, dating from 1989. At
1034 a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
1035 each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
1036 ports were connected with 8 pin DIN connectors on the card bracket,
1037 for which 8 pin to DB25 adapters were supplied. The card also had
1038 jumpers internally to toggle various pinning configurations.
1040 This driver can be built as a module; but then "generic_serial"
1041 will also be built as a module. This has to be loaded before
1042 "ser_a2232". If you want to do this, answer M here.
1044 config WHIPPET_SERIAL
1045 tristate "Hisoft Whippet PCMCIA serial support"
1046 depends on AMIGA_PCMCIA
1048 HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
1049 is no listing for the Whippet in their Amiga section.
1052 tristate "PCMCIA NE2000 support"
1053 depends on AMIGA_PCMCIA
1055 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
1058 To compile this driver as a module, choose M here: the
1059 module will be called apne.
1061 config SERIAL_CONSOLE
1062 bool "Support for serial port console"
1063 depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
1066 bool "Use power LED as a heartbeat"
1069 Use the power-on LED on your machine as a load meter. The exact
1070 behavior is platform-dependent, but normally the flash frequency is
1071 a hyperbolic function of the 5-minute load average.
1073 config PROC_HARDWARE
1074 bool "/proc/hardware support"
1077 source "drivers/zorro/Kconfig"
1079 source kernel/power/Kconfig
1082 bool "Enable seccomp to safely compute untrusted bytecode"
1086 This kernel feature is useful for number crunching applications
1087 that may need to compute untrusted bytecode during their
1088 execution. By using pipes or other transports made available to
1089 the process as file descriptors supporting the read/write
1090 syscalls, it's possible to isolate those applications in
1091 their own address space using seccomp. Once seccomp is
1092 enabled via /proc/<pid>/seccomp, it cannot be disabled
1093 and the task is only allowed to execute a few safe syscalls
1094 defined by each seccomp mode.
1096 If unsure, say Y. Only embedded should say N here.
1107 bool "Support for ISA-bus hardware"
1108 depends on PPC_PREP || PPC_CHRP
1110 Find out whether you have ISA slots on your motherboard. ISA is the
1111 name of a bus system, i.e. the way the CPU talks to the other stuff
1112 inside your box. If you have an Apple machine, say N here; if you
1113 have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
1114 you have an embedded board, consult your board documentation.
1116 config GENERIC_ISA_DMA
1118 depends on POWER3 || POWER4 || 6xx && !CPM2
1124 The Extended Industry Standard Architecture (EISA) bus is a bus
1125 architecture used on some older intel-based PCs.
1130 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
1135 bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
1136 default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
1137 default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
1138 default PCI_QSPAN if !4xx && !CPM2 && 8xx
1140 Find out whether your system includes a PCI bus. PCI is the name of
1141 a bus system, i.e. the way the CPU talks to the other stuff inside
1142 your box. If you say Y here, the kernel will include drivers and
1143 infrastructure code to support PCI bus devices.
1151 depends on !4xx && !CPM2 && 8xx
1153 Say Y here if you have a system based on a Motorola 8xx-series
1154 embedded processor with a QSPAN PCI interface, otherwise say N.
1158 depends on PCI && 8260
1162 bool " Enable workaround for MPC826x erratum PCI 9"
1163 depends on PCI_8260 && !ADS8272
1167 prompt " IDMA channel for PCI 9 workaround"
1168 depends on 8260_PCI9
1170 config 8260_PCI9_IDMA1
1173 config 8260_PCI9_IDMA2
1176 config 8260_PCI9_IDMA3
1179 config 8260_PCI9_IDMA4
1185 bool "PCI for Permedia2"
1186 depends on !4xx && !8xx && APUS
1188 source "drivers/pci/Kconfig"
1190 source "drivers/pcmcia/Kconfig"
1194 menu "Advanced setup"
1196 config ADVANCED_OPTIONS
1197 bool "Prompt for advanced kernel configuration options"
1199 This option will enable prompting for a variety of advanced kernel
1200 configuration options. These options can cause the kernel to not
1201 work if they are set incorrectly, but can be used to optimize certain
1202 aspects of kernel memory management.
1204 Unless you know what you are doing, say N here.
1206 comment "Default settings for advanced configuration options are used"
1207 depends on !ADVANCED_OPTIONS
1209 config HIGHMEM_START_BOOL
1210 bool "Set high memory pool address"
1211 depends on ADVANCED_OPTIONS && HIGHMEM
1213 This option allows you to set the base address of the kernel virtual
1214 area used to map high memory pages. This can be useful in
1215 optimizing the layout of kernel virtual memory.
1217 Say N here unless you know what you are doing.
1219 config HIGHMEM_START
1220 hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
1221 default "0xfe000000"
1223 config LOWMEM_SIZE_BOOL
1224 bool "Set maximum low memory"
1225 depends on ADVANCED_OPTIONS
1227 This option allows you to set the maximum amount of memory which
1228 will be used as "low memory", that is, memory which the kernel can
1229 access directly, without having to set up a kernel virtual mapping.
1230 This can be useful in optimizing the layout of kernel virtual
1233 Say N here unless you know what you are doing.
1236 hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
1237 default "0x30000000"
1239 config KERNEL_START_BOOL
1240 bool "Set custom kernel base address"
1241 depends on ADVANCED_OPTIONS
1243 This option allows you to set the kernel virtual address at which
1244 the kernel will map low memory (the kernel image will be linked at
1245 this address). This can be useful in optimizing the virtual memory
1246 layout of the system.
1248 Say N here unless you know what you are doing.
1251 hex "Virtual address of kernel base" if KERNEL_START_BOOL
1252 default "0xc0000000"
1254 config TASK_SIZE_BOOL
1255 bool "Set custom user task size"
1256 depends on ADVANCED_OPTIONS
1258 This option allows you to set the amount of virtual address space
1259 allocated to user tasks. This can be useful in optimizing the
1260 virtual memory layout of the system.
1262 Say N here unless you know what you are doing.
1265 hex "Size of user task space" if TASK_SIZE_BOOL
1266 default "0x80000000"
1268 config CONSISTENT_START_BOOL
1269 bool "Set custom consistent memory pool address"
1270 depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
1272 This option allows you to set the base virtual address
1273 of the the consistent memory pool. This pool of virtual
1274 memory is used to make consistent memory allocations.
1276 config CONSISTENT_START
1277 hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
1278 default "0xff100000" if NOT_COHERENT_CACHE
1280 config CONSISTENT_SIZE_BOOL
1281 bool "Set custom consistent memory pool size"
1282 depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
1284 This option allows you to set the size of the the
1285 consistent memory pool. This pool of virtual memory
1286 is used to make consistent memory allocations.
1288 config CONSISTENT_SIZE
1289 hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
1290 default "0x00200000" if NOT_COHERENT_CACHE
1292 config BOOT_LOAD_BOOL
1293 bool "Set the boot link/load address"
1294 depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
1296 This option allows you to set the initial load address of the zImage
1297 or zImage.initrd file. This can be useful if you are on a board
1298 which has a small amount of memory.
1300 Say N here unless you know what you are doing.
1303 hex "Link/load address for booting" if BOOT_LOAD_BOOL
1304 default "0x00400000" if 40x || 8xx || 8260
1305 default "0x01000000" if 44x
1306 default "0x00800000"
1309 bool "Pinned Kernel TLBs (860 ONLY)"
1310 depends on ADVANCED_OPTIONS && 8xx
1313 source "drivers/Kconfig"
1317 source "arch/ppc/8xx_io/Kconfig"
1319 source "arch/ppc/8260_io/Kconfig"
1322 menu "IBM 40x options"
1326 bool "SICC Serial port"
1329 config UART1_DFLT_CONSOLE
1331 depends on SERIAL_SICC && UART0_TTYS1
1334 config SERIAL_SICC_CONSOLE
1336 depends on SERIAL_SICC && UART0_TTYS1
1341 source "lib/Kconfig"
1343 source "arch/ppc/oprofile/Kconfig"
1345 source "arch/ppc/Kconfig.debug"
1347 source "security/Kconfig"
1349 source "crypto/Kconfig"
projects / linux-2.6 / blob