git.oblomov.eu Git - linux-2.6/blob - drivers/net/chelsio/subr.c

   1 /*****************************************************************************
   2  *                                                                           *
   3  * File: subr.c                                                              *
   4  * $Revision: 1.27 $                                                         *
   5  * $Date: 2005/06/22 01:08:36 $                                              *
   6  * Description:                                                              *
   7  *  Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. *
   8  *  part of the Chelsio 10Gb Ethernet Driver.                                *
   9  *                                                                           *
  10  * This program is free software; you can redistribute it and/or modify      *
  11  * it under the terms of the GNU General Public License, version 2, as       *
  12  * published by the Free Software Foundation.                                *
  13  *                                                                           *
  14  * You should have received a copy of the GNU General Public License along   *
  15  * with this program; if not, write to the Free Software Foundation, Inc.,   *
  16  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
  17  *                                                                           *
  18  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
  19  * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
  20  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
  21  *                                                                           *
  22  * http://www.chelsio.com                                                    *
  23  *                                                                           *
  24  * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
  25  * All rights reserved.                                                      *
  26  *                                                                           *
  27  * Maintainers: maintainers@chelsio.com                                      *
  28  *                                                                           *
  29  * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
  30  *          Tina Yang               <tainay@chelsio.com>                     *
  31  *          Felix Marti             <felix@chelsio.com>                      *
  32  *          Scott Bardone           <sbardone@chelsio.com>                   *
  33  *          Kurt Ottaway            <kottaway@chelsio.com>                   *
  34  *          Frank DiMambro          <frank@chelsio.com>                      *
  35  *                                                                           *
  36  * History:                                                                  *
  37  *                                                                           *
  38  ****************************************************************************/
  39
  40 #include "common.h"
  41 #include "elmer0.h"
  42 #include "regs.h"
  43 #include "gmac.h"
  44 #include "cphy.h"
  45 #include "sge.h"
  46 #include "tp.h"
  47 #include "espi.h"
  48
  49 /**
  50  *      t1_wait_op_done - wait until an operation is completed
  51  *      @adapter: the adapter performing the operation
  52  *      @reg: the register to check for completion
  53  *      @mask: a single-bit field within @reg that indicates completion
  54  *      @polarity: the value of the field when the operation is completed
  55  *      @attempts: number of check iterations
  56  *      @delay: delay in usecs between iterations
  57  *
  58  *      Wait until an operation is completed by checking a bit in a register
  59  *      up to @attempts times.  Returns %0 if the operation completes and %1
  60  *      otherwise.
  61  */
  62 static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity,
  63                            int attempts, int delay)
  64 {
  65         while (1) {
  66                 u32 val = readl(adapter->regs + reg) & mask;
  67
  68                 if (!!val == polarity)
  69                         return 0;
  70                 if (--attempts == 0)
  71                         return 1;
  72                 if (delay)
  73                         udelay(delay);
  74         }
  75 }
  76
  77 #define TPI_ATTEMPTS 50
  78
  79 /*
  80  * Write a register over the TPI interface (unlocked and locked versions).
  81  */
  82 int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
  83 {
  84         int tpi_busy;
  85
  86         writel(addr, adapter->regs + A_TPI_ADDR);
  87         writel(value, adapter->regs + A_TPI_WR_DATA);
  88         writel(F_TPIWR, adapter->regs + A_TPI_CSR);
  89
  90         tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
  91                                    TPI_ATTEMPTS, 3);
  92         if (tpi_busy)
  93                 CH_ALERT("%s: TPI write to 0x%x failed\n",
  94                          adapter->name, addr);
  95         return tpi_busy;
  96 }
  97
  98 int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
  99 {
 100         int ret;
 101
 102         spin_lock(&adapter->tpi_lock);
 103         ret = __t1_tpi_write(adapter, addr, value);
 104         spin_unlock(&adapter->tpi_lock);
 105         return ret;
 106 }
 107
 108 /*
 109  * Read a register over the TPI interface (unlocked and locked versions).
 110  */
 111 int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
 112 {
 113         int tpi_busy;
 114
 115         writel(addr, adapter->regs + A_TPI_ADDR);
 116         writel(0, adapter->regs + A_TPI_CSR);
 117
 118         tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
 119                                    TPI_ATTEMPTS, 3);
 120         if (tpi_busy)
 121                 CH_ALERT("%s: TPI read from 0x%x failed\n",
 122                          adapter->name, addr);
 123         else
 124                 *valp = readl(adapter->regs + A_TPI_RD_DATA);
 125         return tpi_busy;
 126 }
 127
 128 int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
 129 {
 130         int ret;
 131
 132         spin_lock(&adapter->tpi_lock);
 133         ret = __t1_tpi_read(adapter, addr, valp);
 134         spin_unlock(&adapter->tpi_lock);
 135         return ret;
 136 }
 137
 138 /*
 139  * Set a TPI parameter.
 140  */
 141 static void t1_tpi_par(adapter_t *adapter, u32 value)
 142 {
 143         writel(V_TPIPAR(value), adapter->regs + A_TPI_PAR);
 144 }
 145
 146 /*
 147  * Called when a port's link settings change to propagate the new values to the
 148  * associated PHY and MAC.  After performing the common tasks it invokes an
 149  * OS-specific handler.
 150  */
 151 void t1_link_changed(adapter_t *adapter, int port_id)
 152 {
 153         int link_ok, speed, duplex, fc;
 154         struct cphy *phy = adapter->port[port_id].phy;
 155         struct link_config *lc = &adapter->port[port_id].link_config;
 156
 157         phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
 158
 159         lc->speed = speed < 0 ? SPEED_INVALID : speed;
 160         lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
 161         if (!(lc->requested_fc & PAUSE_AUTONEG))
 162                 fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
 163
 164         if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
 165                 /* Set MAC speed, duplex, and flow control to match PHY. */
 166                 struct cmac *mac = adapter->port[port_id].mac;
 167
 168                 mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc);
 169                 lc->fc = (unsigned char)fc;
 170         }
 171         t1_link_negotiated(adapter, port_id, link_ok, speed, duplex, fc);
 172 }
 173
 174 static int t1_pci_intr_handler(adapter_t *adapter)
 175 {
 176         u32 pcix_cause;
 177
 178         pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);
 179
 180         if (pcix_cause) {
 181                 pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE,
 182                                        pcix_cause);
 183                 t1_fatal_err(adapter);    /* PCI errors are fatal */
 184         }
 185         return 0;
 186 }
 187
 188 #ifdef CONFIG_CHELSIO_T1_COUGAR
 189 #include "cspi.h"
 190 #endif
 191 #ifdef CONFIG_CHELSIO_T1_1G
 192 #include "fpga_defs.h"
 193
 194 /*
 195  * PHY interrupt handler for FPGA boards.
 196  */
 197 static int fpga_phy_intr_handler(adapter_t *adapter)
 198 {
 199         int p;
 200         u32 cause = readl(adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE);
 201
 202         for_each_port(adapter, p)
 203                 if (cause & (1 << p)) {
 204                         struct cphy *phy = adapter->port[p].phy;
 205                         int phy_cause = phy->ops->interrupt_handler(phy);
 206
 207                         if (phy_cause & cphy_cause_link_change)
 208                                 t1_link_changed(adapter, p);
 209                 }
 210         writel(cause, adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE);
 211         return 0;
 212 }
 213
 214 /*
 215  * Slow path interrupt handler for FPGAs.
 216  */
 217 static int fpga_slow_intr(adapter_t *adapter)
 218 {
 219         u32 cause = readl(adapter->regs + A_PL_CAUSE);
 220
 221         cause &= ~F_PL_INTR_SGE_DATA;
 222         if (cause & F_PL_INTR_SGE_ERR)
 223                 t1_sge_intr_error_handler(adapter->sge);
 224
 225         if (cause & FPGA_PCIX_INTERRUPT_GMAC)
 226                 fpga_phy_intr_handler(adapter);
 227
 228         if (cause & FPGA_PCIX_INTERRUPT_TP) {
 229                 /*
 230                  * FPGA doesn't support MC4 interrupts and it requires
 231                  * this odd layer of indirection for MC5.
 232                  */
 233                 u32 tp_cause = readl(adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
 234
 235                 /* Clear TP interrupt */
 236                 writel(tp_cause, adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
 237         }
 238         if (cause & FPGA_PCIX_INTERRUPT_PCIX)
 239                 t1_pci_intr_handler(adapter);
 240
 241         /* Clear the interrupts just processed. */
 242         if (cause)
 243                 writel(cause, adapter->regs + A_PL_CAUSE);
 244
 245         return cause != 0;
 246 }
 247 #endif
 248
 249 /*
 250  * Wait until Elmer's MI1 interface is ready for new operations.
 251  */
 252 static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
 253 {
 254         int attempts = 100, busy;
 255
 256         do {
 257                 u32 val;
 258
 259                 __t1_tpi_read(adapter, mi1_reg, &val);
 260                 busy = val & F_MI1_OP_BUSY;
 261                 if (busy)
 262                         udelay(10);
 263         } while (busy && --attempts);
 264         if (busy)
 265                 CH_ALERT("%s: MDIO operation timed out\n", adapter->name);
 266         return busy;
 267 }
 268
 269 /*
 270  * MI1 MDIO initialization.
 271  */
 272 static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
 273 {
 274         u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1;
 275         u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) |
 276                 V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv);
 277
 278         if (!(bi->caps & SUPPORTED_10000baseT_Full))
 279                 val |= V_MI1_SOF(1);
 280         t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val);
 281 }
 282
 283 #if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR)
 284 /*
 285  * Elmer MI1 MDIO read/write operations.
 286  */
 287 static int mi1_mdio_read(adapter_t *adapter, int phy_addr, int mmd_addr,
 288                          int reg_addr, unsigned int *valp)
 289 {
 290         u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
 291
 292         if (mmd_addr)
 293                 return -EINVAL;
 294
 295         spin_lock(&adapter->tpi_lock);
 296         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 297         __t1_tpi_write(adapter,
 298                         A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_READ);
 299         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 300         __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
 301         spin_unlock(&adapter->tpi_lock);
 302         return 0;
 303 }
 304
 305 static int mi1_mdio_write(adapter_t *adapter, int phy_addr, int mmd_addr,
 306                           int reg_addr, unsigned int val)
 307 {
 308         u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
 309
 310         if (mmd_addr)
 311                 return -EINVAL;
 312
 313         spin_lock(&adapter->tpi_lock);
 314         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 315         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
 316         __t1_tpi_write(adapter,
 317                         A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_WRITE);
 318         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 319         spin_unlock(&adapter->tpi_lock);
 320         return 0;
 321 }
 322
 323 #if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR)
 324 static const struct mdio_ops mi1_mdio_ops = {
 325         .init = mi1_mdio_init,
 326         .read = mi1_mdio_read,
 327         .write = mi1_mdio_write
 328 };
 329 #endif
 330
 331 #endif
 332
 333 static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
 334                              int reg_addr, unsigned int *valp)
 335 {
 336         u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
 337
 338         spin_lock(&adapter->tpi_lock);
 339
 340         /* Write the address we want. */
 341         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 342         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
 343         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
 344                        MI1_OP_INDIRECT_ADDRESS);
 345         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 346
 347         /* Write the operation we want. */
 348         __t1_tpi_write(adapter,
 349                         A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
 350         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 351
 352         /* Read the data. */
 353         __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
 354         spin_unlock(&adapter->tpi_lock);
 355         return 0;
 356 }
 357
 358 static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
 359                               int reg_addr, unsigned int val)
 360 {
 361         u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
 362
 363         spin_lock(&adapter->tpi_lock);
 364
 365         /* Write the address we want. */
 366         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 367         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
 368         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
 369                        MI1_OP_INDIRECT_ADDRESS);
 370         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 371
 372         /* Write the data. */
 373         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
 374         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
 375         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 376         spin_unlock(&adapter->tpi_lock);
 377         return 0;
 378 }
 379
 380 static const struct mdio_ops mi1_mdio_ext_ops = {
 381         .init = mi1_mdio_init,
 382         .read = mi1_mdio_ext_read,
 383         .write = mi1_mdio_ext_write
 384 };
 385
 386 enum {
 387         CH_BRD_T110_1CU,
 388         CH_BRD_N110_1F,
 389         CH_BRD_N210_1F,
 390         CH_BRD_T210_1F,
 391         CH_BRD_T210_1CU,
 392         CH_BRD_N204_4CU,
 393 };
 394
 395 static const struct board_info t1_board[] = {
 396         {
 397                 .board          = CHBT_BOARD_CHT110,
 398                 .port_number    = 1,
 399                 .caps           = SUPPORTED_10000baseT_Full,
 400                 .chip_term      = CHBT_TERM_T1,
 401                 .chip_mac       = CHBT_MAC_PM3393,
 402                 .chip_phy       = CHBT_PHY_MY3126,
 403                 .clock_core     = 125000000,
 404                 .clock_mc3      = 150000000,
 405                 .clock_mc4      = 125000000,
 406                 .espi_nports    = 1,
 407                 .clock_elmer0   = 44,
 408                 .mdio_mdien     = 1,
 409                 .mdio_mdiinv    = 1,
 410                 .mdio_mdc       = 1,
 411                 .mdio_phybaseaddr = 1,
 412                 .gmac           = &t1_pm3393_ops,
 413                 .gphy           = &t1_my3126_ops,
 414                 .mdio_ops       = &mi1_mdio_ext_ops,
 415                 .desc           = "Chelsio T110 1x10GBase-CX4 TOE",
 416         },
 417
 418         {
 419                 .board          = CHBT_BOARD_N110,
 420                 .port_number    = 1,
 421                 .caps           = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE,
 422                 .chip_term      = CHBT_TERM_T1,
 423                 .chip_mac       = CHBT_MAC_PM3393,
 424                 .chip_phy       = CHBT_PHY_88X2010,
 425                 .clock_core     = 125000000,
 426                 .espi_nports    = 1,
 427                 .clock_elmer0   = 44,
 428                 .mdio_mdien     = 0,
 429                 .mdio_mdiinv    = 0,
 430                 .mdio_mdc       = 1,
 431                 .mdio_phybaseaddr = 0,
 432                 .gmac           = &t1_pm3393_ops,
 433                 .gphy           = &t1_mv88x201x_ops,
 434                 .mdio_ops       = &mi1_mdio_ext_ops,
 435                 .desc           = "Chelsio N110 1x10GBaseX NIC",
 436         },
 437
 438         {
 439                 .board          = CHBT_BOARD_N210,
 440                 .port_number    = 1,
 441                 .caps           = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE,
 442                 .chip_term      = CHBT_TERM_T2,
 443                 .chip_mac       = CHBT_MAC_PM3393,
 444                 .chip_phy       = CHBT_PHY_88X2010,
 445                 .clock_core     = 125000000,
 446                 .espi_nports    = 1,
 447                 .clock_elmer0   = 44,
 448                 .mdio_mdien     = 0,
 449                 .mdio_mdiinv    = 0,
 450                 .mdio_mdc       = 1,
 451                 .mdio_phybaseaddr = 0,
 452                 .gmac           = &t1_pm3393_ops,
 453                 .gphy           = &t1_mv88x201x_ops,
 454                 .mdio_ops       = &mi1_mdio_ext_ops,
 455                 .desc           = "Chelsio N210 1x10GBaseX NIC",
 456         },
 457
 458         {
 459                 .board          = CHBT_BOARD_CHT210,
 460                 .port_number    = 1,
 461                 .caps           = SUPPORTED_10000baseT_Full,
 462                 .chip_term      = CHBT_TERM_T2,
 463                 .chip_mac       = CHBT_MAC_PM3393,
 464                 .chip_phy       = CHBT_PHY_88X2010,
 465                 .clock_core     = 125000000,
 466                 .clock_mc3      = 133000000,
 467                 .clock_mc4      = 125000000,
 468                 .espi_nports    = 1,
 469                 .clock_elmer0   = 44,
 470                 .mdio_mdien     = 0,
 471                 .mdio_mdiinv    = 0,
 472                 .mdio_mdc       = 1,
 473                 .mdio_phybaseaddr = 0,
 474                 .gmac           = &t1_pm3393_ops,
 475                 .gphy           = &t1_mv88x201x_ops,
 476                 .mdio_ops       = &mi1_mdio_ext_ops,
 477                 .desc           = "Chelsio T210 1x10GBaseX TOE",
 478         },
 479
 480         {
 481                 .board          = CHBT_BOARD_CHT210,
 482                 .port_number    = 1,
 483                 .caps           = SUPPORTED_10000baseT_Full,
 484                 .chip_term      = CHBT_TERM_T2,
 485                 .chip_mac       = CHBT_MAC_PM3393,
 486                 .chip_phy       = CHBT_PHY_MY3126,
 487                 .clock_core     = 125000000,
 488                 .clock_mc3      = 133000000,
 489                 .clock_mc4      = 125000000,
 490                 .espi_nports    = 1,
 491                 .clock_elmer0   = 44,
 492                 .mdio_mdien     = 1,
 493                 .mdio_mdiinv    = 1,
 494                 .mdio_mdc       = 1,
 495                 .mdio_phybaseaddr = 1,
 496                 .gmac           = &t1_pm3393_ops,
 497                 .gphy           = &t1_my3126_ops,
 498                 .mdio_ops       = &mi1_mdio_ext_ops,
 499                 .desc           = "Chelsio T210 1x10GBase-CX4 TOE",
 500         },
 501
 502 #ifdef CONFIG_CHELSIO_T1_1G
 503         {
 504                 .board          = CHBT_BOARD_CHN204,
 505                 .port_number    = 4,
 506                 .caps           = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full
 507                                 | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full
 508                                 | SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
 509                                   SUPPORTED_PAUSE | SUPPORTED_TP,
 510                 .chip_term      = CHBT_TERM_T2,
 511                 .chip_mac       = CHBT_MAC_VSC7321,
 512                 .chip_phy       = CHBT_PHY_88E1111,
 513                 .clock_core     = 100000000,
 514                 .espi_nports    = 4,
 515                 .clock_elmer0   = 44,
 516                 .mdio_mdien     = 0,
 517                 .mdio_mdiinv    = 0,
 518                 .mdio_mdc       = 0,
 519                 .mdio_phybaseaddr = 4,
 520                 .gmac           = &t1_vsc7326_ops,
 521                 .gphy           = &t1_mv88e1xxx_ops,
 522                 .mdio_ops       = &mi1_mdio_ops,
 523                 .desc           = "Chelsio N204 4x100/1000BaseT NIC",
 524         },
 525 #endif
 526
 527 };
 528
 529 struct pci_device_id t1_pci_tbl[] = {
 530         CH_DEVICE(8, 0, CH_BRD_T110_1CU),
 531         CH_DEVICE(8, 1, CH_BRD_T110_1CU),
 532         CH_DEVICE(7, 0, CH_BRD_N110_1F),
 533         CH_DEVICE(10, 1, CH_BRD_N210_1F),
 534         CH_DEVICE(11, 1, CH_BRD_T210_1F),
 535         CH_DEVICE(14, 1, CH_BRD_T210_1CU),
 536         CH_DEVICE(16, 1, CH_BRD_N204_4CU),
 537         { 0 }
 538 };
 539
 540 MODULE_DEVICE_TABLE(pci, t1_pci_tbl);
 541
 542 /*
 543  * Return the board_info structure with a given index.  Out-of-range indices
 544  * return NULL.
 545  */
 546 const struct board_info *t1_get_board_info(unsigned int board_id)
 547 {
 548         return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL;
 549 }
 550
 551 struct chelsio_vpd_t {
 552         u32 format_version;
 553         u8 serial_number[16];
 554         u8 mac_base_address[6];
 555         u8 pad[2];           /* make multiple-of-4 size requirement explicit */
 556 };
 557
 558 #define EEPROMSIZE        (8 * 1024)
 559 #define EEPROM_MAX_POLL   4
 560
 561 /*
 562  * Read SEEPROM. A zero is written to the flag register when the addres is
 563  * written to the Control register. The hardware device will set the flag to a
 564  * one when 4B have been transferred to the Data register.
 565  */
 566 int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
 567 {
 568         int i = EEPROM_MAX_POLL;
 569         u16 val;
 570
 571         if (addr >= EEPROMSIZE || (addr & 3))
 572                 return -EINVAL;
 573
 574         pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr);
 575         do {
 576                 udelay(50);
 577                 pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val);
 578         } while (!(val & F_VPD_OP_FLAG) && --i);
 579
 580         if (!(val & F_VPD_OP_FLAG)) {
 581                 CH_ERR("%s: reading EEPROM address 0x%x failed\n",
 582                        adapter->name, addr);
 583                 return -EIO;
 584         }
 585         pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
 586         *data = le32_to_cpu(*data);
 587         return 0;
 588 }
 589
 590 static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd)
 591 {
 592         int addr, ret = 0;
 593
 594         for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
 595                 ret = t1_seeprom_read(adapter, addr,
 596                                       (u32 *)((u8 *)vpd + addr));
 597
 598         return ret;
 599 }
 600
 601 /*
 602  * Read a port's MAC address from the VPD ROM.
 603  */
 604 static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[])
 605 {
 606         struct chelsio_vpd_t vpd;
 607
 608         if (t1_eeprom_vpd_get(adapter, &vpd))
 609                 return 1;
 610         memcpy(mac_addr, vpd.mac_base_address, 5);
 611         mac_addr[5] = vpd.mac_base_address[5] + index;
 612         return 0;
 613 }
 614
 615 /*
 616  * Set up the MAC/PHY according to the requested link settings.
 617  *
 618  * If the PHY can auto-negotiate first decide what to advertise, then
 619  * enable/disable auto-negotiation as desired and reset.
 620  *
 621  * If the PHY does not auto-negotiate we just reset it.
 622  *
 623  * If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
 624  * otherwise do it later based on the outcome of auto-negotiation.
 625  */
 626 int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
 627 {
 628         unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
 629
 630         if (lc->supported & SUPPORTED_Autoneg) {
 631                 lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE);
 632                 if (fc) {
 633                         if (fc == ((PAUSE_RX | PAUSE_TX) &
 634                                    (mac->adapter->params.nports < 2)))
 635                                 lc->advertising |= ADVERTISED_PAUSE;
 636                         else {
 637                                 lc->advertising |= ADVERTISED_ASYM_PAUSE;
 638                                 if (fc == PAUSE_RX)
 639                                         lc->advertising |= ADVERTISED_PAUSE;
 640                         }
 641                 }
 642                 phy->ops->advertise(phy, lc->advertising);
 643
 644                 if (lc->autoneg == AUTONEG_DISABLE) {
 645                         lc->speed = lc->requested_speed;
 646                         lc->duplex = lc->requested_duplex;
 647                         lc->fc = (unsigned char)fc;
 648                         mac->ops->set_speed_duplex_fc(mac, lc->speed,
 649                                                       lc->duplex, fc);
 650                         /* Also disables autoneg */
 651                         phy->state = PHY_AUTONEG_RDY;
 652                         phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
 653                         phy->ops->reset(phy, 0);
 654                 } else {
 655                         phy->state = PHY_AUTONEG_EN;
 656                         phy->ops->autoneg_enable(phy); /* also resets PHY */
 657                 }
 658         } else {
 659                 phy->state = PHY_AUTONEG_RDY;
 660                 mac->ops->set_speed_duplex_fc(mac, -1, -1, fc);
 661                 lc->fc = (unsigned char)fc;
 662                 phy->ops->reset(phy, 0);
 663         }
 664         return 0;
 665 }
 666
 667 /*
 668  * External interrupt handler for boards using elmer0.
 669  */
 670 int t1_elmer0_ext_intr_handler(adapter_t *adapter)
 671 {
 672         struct cphy *phy;
 673         int phy_cause;
 674         u32 cause;
 675
 676         t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
 677
 678         switch (board_info(adapter)->board) {
 679 #ifdef CONFIG_CHELSIO_T1_1G
 680         case CHBT_BOARD_CHT204:
 681         case CHBT_BOARD_CHT204E:
 682         case CHBT_BOARD_CHN204:
 683         case CHBT_BOARD_CHT204V: {
 684                 int i, port_bit;
 685                 for_each_port(adapter, i) {
 686                         port_bit = i + 1;
 687                         if (!(cause & (1 << port_bit)))
 688                                 continue;
 689
 690                         phy = adapter->port[i].phy;
 691                         phy_cause = phy->ops->interrupt_handler(phy);
 692                         if (phy_cause & cphy_cause_link_change)
 693                                 t1_link_changed(adapter, i);
 694                 }
 695                 break;
 696         }
 697         case CHBT_BOARD_CHT101:
 698                 if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */
 699                         phy = adapter->port[0].phy;
 700                         phy_cause = phy->ops->interrupt_handler(phy);
 701                         if (phy_cause & cphy_cause_link_change)
 702                                 t1_link_changed(adapter, 0);
 703                 }
 704                 break;
 705         case CHBT_BOARD_7500: {
 706                 int p;
 707                 /*
 708                  * Elmer0's interrupt cause isn't useful here because there is
 709                  * only one bit that can be set for all 4 ports.  This means
 710                  * we are forced to check every PHY's interrupt status
 711                  * register to see who initiated the interrupt.
 712                  */
 713                 for_each_port(adapter, p) {
 714                         phy = adapter->port[p].phy;
 715                         phy_cause = phy->ops->interrupt_handler(phy);
 716                         if (phy_cause & cphy_cause_link_change)
 717                             t1_link_changed(adapter, p);
 718                 }
 719                 break;
 720         }
 721 #endif
 722         case CHBT_BOARD_CHT210:
 723         case CHBT_BOARD_N210:
 724         case CHBT_BOARD_N110:
 725                 if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
 726                         phy = adapter->port[0].phy;
 727                         phy_cause = phy->ops->interrupt_handler(phy);
 728                         if (phy_cause & cphy_cause_link_change)
 729                                 t1_link_changed(adapter, 0);
 730                 }
 731                 break;
 732         case CHBT_BOARD_8000:
 733         case CHBT_BOARD_CHT110:
 734                 CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
 735                        cause);
 736                 if (cause & ELMER0_GP_BIT1) {        /* PMC3393 INTB */
 737                         struct cmac *mac = adapter->port[0].mac;
 738
 739                         mac->ops->interrupt_handler(mac);
 740                 }
 741                 if (cause & ELMER0_GP_BIT5) {        /* XPAK MOD_DETECT */
 742                         u32 mod_detect;
 743
 744                         t1_tpi_read(adapter,
 745                                         A_ELMER0_GPI_STAT, &mod_detect);
 746                         CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
 747                                mod_detect ? "removed" : "inserted");
 748                 }
 749                 break;
 750 #ifdef CONFIG_CHELSIO_T1_COUGAR
 751         case CHBT_BOARD_COUGAR:
 752                 if (adapter->params.nports == 1) {
 753                         if (cause & ELMER0_GP_BIT1) {         /* Vitesse MAC */
 754                                 struct cmac *mac = adapter->port[0].mac;
 755                                 mac->ops->interrupt_handler(mac);
 756                         }
 757                         if (cause & ELMER0_GP_BIT5) {     /* XPAK MOD_DETECT */
 758                         }
 759                 } else {
 760                         int i, port_bit;
 761
 762                         for_each_port(adapter, i) {
 763                                 port_bit = i ? i + 1 : 0;
 764                                 if (!(cause & (1 << port_bit)))
 765                                         continue;
 766
 767                                 phy = adapter->port[i].phy;
 768                                 phy_cause = phy->ops->interrupt_handler(phy);
 769                                 if (phy_cause & cphy_cause_link_change)
 770                                         t1_link_changed(adapter, i);
 771                         }
 772                 }
 773                 break;
 774 #endif
 775         }
 776         t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
 777         return 0;
 778 }
 779
 780 /* Enables all interrupts. */
 781 void t1_interrupts_enable(adapter_t *adapter)
 782 {
 783         unsigned int i;
 784
 785         adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP;
 786
 787         t1_sge_intr_enable(adapter->sge);
 788         t1_tp_intr_enable(adapter->tp);
 789         if (adapter->espi) {
 790                 adapter->slow_intr_mask |= F_PL_INTR_ESPI;
 791                 t1_espi_intr_enable(adapter->espi);
 792         }
 793
 794         /* Enable MAC/PHY interrupts for each port. */
 795         for_each_port(adapter, i) {
 796                 adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac);
 797                 adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy);
 798         }
 799
 800         /* Enable PCIX & external chip interrupts on ASIC boards. */
 801         if (t1_is_asic(adapter)) {
 802                 u32 pl_intr = readl(adapter->regs + A_PL_ENABLE);
 803
 804                 /* PCI-X interrupts */
 805                 pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
 806                                        0xffffffff);
 807
 808                 adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
 809                 pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
 810                 writel(pl_intr, adapter->regs + A_PL_ENABLE);
 811         }
 812 }
 813
 814 /* Disables all interrupts. */
 815 void t1_interrupts_disable(adapter_t* adapter)
 816 {
 817         unsigned int i;
 818
 819         t1_sge_intr_disable(adapter->sge);
 820         t1_tp_intr_disable(adapter->tp);
 821         if (adapter->espi)
 822                 t1_espi_intr_disable(adapter->espi);
 823
 824         /* Disable MAC/PHY interrupts for each port. */
 825         for_each_port(adapter, i) {
 826                 adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac);
 827                 adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy);
 828         }
 829
 830         /* Disable PCIX & external chip interrupts. */
 831         if (t1_is_asic(adapter))
 832                 writel(0, adapter->regs + A_PL_ENABLE);
 833
 834         /* PCI-X interrupts */
 835         pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
 836
 837         adapter->slow_intr_mask = 0;
 838 }
 839
 840 /* Clears all interrupts */
 841 void t1_interrupts_clear(adapter_t* adapter)
 842 {
 843         unsigned int i;
 844
 845         t1_sge_intr_clear(adapter->sge);
 846         t1_tp_intr_clear(adapter->tp);
 847         if (adapter->espi)
 848                 t1_espi_intr_clear(adapter->espi);
 849
 850         /* Clear MAC/PHY interrupts for each port. */
 851         for_each_port(adapter, i) {
 852                 adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac);
 853                 adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy);
 854         }
 855
 856         /* Enable interrupts for external devices. */
 857         if (t1_is_asic(adapter)) {
 858                 u32 pl_intr = readl(adapter->regs + A_PL_CAUSE);
 859
 860                 writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
 861                        adapter->regs + A_PL_CAUSE);
 862         }
 863
 864         /* PCI-X interrupts */
 865         pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
 866 }
 867
 868 /*
 869  * Slow path interrupt handler for ASICs.
 870  */
 871 static int asic_slow_intr(adapter_t *adapter)
 872 {
 873         u32 cause = readl(adapter->regs + A_PL_CAUSE);
 874
 875         cause &= adapter->slow_intr_mask;
 876         if (!cause)
 877                 return 0;
 878         if (cause & F_PL_INTR_SGE_ERR)
 879                 t1_sge_intr_error_handler(adapter->sge);
 880         if (cause & F_PL_INTR_TP)
 881                 t1_tp_intr_handler(adapter->tp);
 882         if (cause & F_PL_INTR_ESPI)
 883                 t1_espi_intr_handler(adapter->espi);
 884         if (cause & F_PL_INTR_PCIX)
 885                 t1_pci_intr_handler(adapter);
 886         if (cause & F_PL_INTR_EXT)
 887                 t1_elmer0_ext_intr(adapter);
 888
 889         /* Clear the interrupts just processed. */
 890         writel(cause, adapter->regs + A_PL_CAUSE);
 891         readl(adapter->regs + A_PL_CAUSE); /* flush writes */
 892         return 1;
 893 }
 894
 895 int t1_slow_intr_handler(adapter_t *adapter)
 896 {
 897 #ifdef CONFIG_CHELSIO_T1_1G
 898         if (!t1_is_asic(adapter))
 899                 return fpga_slow_intr(adapter);
 900 #endif
 901         return asic_slow_intr(adapter);
 902 }
 903
 904 /* Power sequencing is a work-around for Intel's XPAKs. */
 905 static void power_sequence_xpak(adapter_t* adapter)
 906 {
 907         u32 mod_detect;
 908         u32 gpo;
 909
 910         /* Check for XPAK */
 911         t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
 912         if (!(ELMER0_GP_BIT5 & mod_detect)) {
 913                 /* XPAK is present */
 914                 t1_tpi_read(adapter, A_ELMER0_GPO, &gpo);
 915                 gpo |= ELMER0_GP_BIT18;
 916                 t1_tpi_write(adapter, A_ELMER0_GPO, gpo);
 917         }
 918 }
 919
 920 int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
 921                                struct adapter_params *p)
 922 {
 923         p->chip_version = bi->chip_term;
 924         p->is_asic = (p->chip_version != CHBT_TERM_FPGA);
 925         if (p->chip_version == CHBT_TERM_T1 ||
 926             p->chip_version == CHBT_TERM_T2 ||
 927             p->chip_version == CHBT_TERM_FPGA) {
 928                 u32 val = readl(adapter->regs + A_TP_PC_CONFIG);
 929
 930                 val = G_TP_PC_REV(val);
 931                 if (val == 2)
 932                         p->chip_revision = TERM_T1B;
 933                 else if (val == 3)
 934                         p->chip_revision = TERM_T2;
 935                 else
 936                         return -1;
 937         } else
 938                 return -1;
 939         return 0;
 940 }
 941
 942 /*
 943  * Enable board components other than the Chelsio chip, such as external MAC
 944  * and PHY.
 945  */
 946 static int board_init(adapter_t *adapter, const struct board_info *bi)
 947 {
 948         switch (bi->board) {
 949         case CHBT_BOARD_8000:
 950         case CHBT_BOARD_N110:
 951         case CHBT_BOARD_N210:
 952         case CHBT_BOARD_CHT210:
 953         case CHBT_BOARD_COUGAR:
 954                 t1_tpi_par(adapter, 0xf);
 955                 t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
 956                 break;
 957         case CHBT_BOARD_CHT110:
 958                 t1_tpi_par(adapter, 0xf);
 959                 t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
 960
 961                 /* TBD XXX Might not need.  This fixes a problem
 962                  *         described in the Intel SR XPAK errata.
 963                  */
 964                 power_sequence_xpak(adapter);
 965                 break;
 966 #ifdef CONFIG_CHELSIO_T1_1G
 967         case CHBT_BOARD_CHT204E:
 968                 /* add config space write here */
 969         case CHBT_BOARD_CHT204:
 970         case CHBT_BOARD_CHT204V:
 971         case CHBT_BOARD_CHN204:
 972                 t1_tpi_par(adapter, 0xf);
 973                 t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
 974                 break;
 975         case CHBT_BOARD_CHT101:
 976         case CHBT_BOARD_7500:
 977                 t1_tpi_par(adapter, 0xf);
 978                 t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
 979                 break;
 980 #endif
 981         }
 982         return 0;
 983 }
 984
 985 /*
 986  * Initialize and configure the Terminator HW modules.  Note that external
 987  * MAC and PHYs are initialized separately.
 988  */
 989 int t1_init_hw_modules(adapter_t *adapter)
 990 {
 991         int err = -EIO;
 992         const struct board_info *bi = board_info(adapter);
 993
 994         if (!bi->clock_mc4) {
 995                 u32 val = readl(adapter->regs + A_MC4_CFG);
 996
 997                 writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG);
 998                 writel(F_M_BUS_ENABLE | F_TCAM_RESET,
 999                        adapter->regs + A_MC5_CONFIG);
1000         }
1001
1002 #ifdef CONFIG_CHELSIO_T1_COUGAR
1003         if (adapter->cspi && t1_cspi_init(adapter->cspi))
1004                 goto out_err;
1005 #endif
1006         if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
1007                                           bi->espi_nports))
1008                 goto out_err;
1009
1010         if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core))
1011                 goto out_err;
1012
1013         err = t1_sge_configure(adapter->sge, &adapter->params.sge);
1014         if (err)
1015                 goto out_err;
1016
1017         err = 0;
1018 out_err:
1019         return err;
1020 }
1021
1022 /*
1023  * Determine a card's PCI mode.
1024  */
1025 static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p)
1026 {
1027         static const unsigned short speed_map[] = { 33, 66, 100, 133 };
1028         u32 pci_mode;
1029
1030         pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode);
1031         p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)];
1032         p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32;
1033         p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0;
1034 }
1035
1036 /*
1037  * Release the structures holding the SW per-Terminator-HW-module state.
1038  */
1039 void t1_free_sw_modules(adapter_t *adapter)
1040 {
1041         unsigned int i;
1042
1043         for_each_port(adapter, i) {
1044                 struct cmac *mac = adapter->port[i].mac;
1045                 struct cphy *phy = adapter->port[i].phy;
1046
1047                 if (mac)
1048                         mac->ops->destroy(mac);
1049                 if (phy)
1050                         phy->ops->destroy(phy);
1051         }
1052
1053         if (adapter->sge)
1054                 t1_sge_destroy(adapter->sge);
1055         if (adapter->tp)
1056                 t1_tp_destroy(adapter->tp);
1057         if (adapter->espi)
1058                 t1_espi_destroy(adapter->espi);
1059 #ifdef CONFIG_CHELSIO_T1_COUGAR
1060         if (adapter->cspi)
1061                 t1_cspi_destroy(adapter->cspi);
1062 #endif
1063 }
1064
1065 static void __devinit init_link_config(struct link_config *lc,
1066                                        const struct board_info *bi)
1067 {
1068         lc->supported = bi->caps;
1069         lc->requested_speed = lc->speed = SPEED_INVALID;
1070         lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
1071         lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
1072         if (lc->supported & SUPPORTED_Autoneg) {
1073                 lc->advertising = lc->supported;
1074                 lc->autoneg = AUTONEG_ENABLE;
1075                 lc->requested_fc |= PAUSE_AUTONEG;
1076         } else {
1077                 lc->advertising = 0;
1078                 lc->autoneg = AUTONEG_DISABLE;
1079         }
1080 }
1081
1082 #ifdef CONFIG_CHELSIO_T1_COUGAR
1083         if (bi->clock_cspi && !(adapter->cspi = t1_cspi_create(adapter))) {
1084                 CH_ERR("%s: CSPI initialization failed\n",
1085                        adapter->name);
1086                 goto error;
1087         }
1088 #endif
1089
1090 /*
1091  * Allocate and initialize the data structures that hold the SW state of
1092  * the Terminator HW modules.
1093  */
1094 int __devinit t1_init_sw_modules(adapter_t *adapter,
1095                                  const struct board_info *bi)
1096 {
1097         unsigned int i;
1098
1099         adapter->params.brd_info = bi;
1100         adapter->params.nports = bi->port_number;
1101         adapter->params.stats_update_period = bi->gmac->stats_update_period;
1102
1103         adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
1104         if (!adapter->sge) {
1105                 CH_ERR("%s: SGE initialization failed\n",
1106                        adapter->name);
1107                 goto error;
1108         }
1109
1110         if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
1111                 CH_ERR("%s: ESPI initialization failed\n",
1112                        adapter->name);
1113                 goto error;
1114         }
1115
1116         adapter->tp = t1_tp_create(adapter, &adapter->params.tp);
1117         if (!adapter->tp) {
1118                 CH_ERR("%s: TP initialization failed\n",
1119                        adapter->name);
1120                 goto error;
1121         }
1122
1123         board_init(adapter, bi);
1124         bi->mdio_ops->init(adapter, bi);
1125         if (bi->gphy->reset)
1126                 bi->gphy->reset(adapter);
1127         if (bi->gmac->reset)
1128                 bi->gmac->reset(adapter);
1129
1130         for_each_port(adapter, i) {
1131                 u8 hw_addr[6];
1132                 struct cmac *mac;
1133                 int phy_addr = bi->mdio_phybaseaddr + i;
1134
1135                 adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
1136                                                         bi->mdio_ops);
1137                 if (!adapter->port[i].phy) {
1138                         CH_ERR("%s: PHY %d initialization failed\n",
1139                                adapter->name, i);
1140                         goto error;
1141                 }
1142
1143                 adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
1144                 if (!mac) {
1145                         CH_ERR("%s: MAC %d initialization failed\n",
1146                                adapter->name, i);
1147                         goto error;
1148                 }
1149
1150                 /*
1151                  * Get the port's MAC addresses either from the EEPROM if one
1152                  * exists or the one hardcoded in the MAC.
1153                  */
1154                 if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY)
1155                         mac->ops->macaddress_get(mac, hw_addr);
1156                 else if (vpd_macaddress_get(adapter, i, hw_addr)) {
1157                         CH_ERR("%s: could not read MAC address from VPD ROM\n",
1158                                adapter->port[i].dev->name);
1159                         goto error;
1160                 }
1161                 memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN);
1162                 init_link_config(&adapter->port[i].link_config, bi);
1163         }
1164
1165         get_pci_mode(adapter, &adapter->params.pci);
1166         t1_interrupts_clear(adapter);
1167         return 0;
1168
1169 error:
1170         t1_free_sw_modules(adapter);
1171         return -1;
1172 }