PCI Hotplug: make cpcihp driver use modern apis
[linux-2.6] / drivers / net / s2io.c
1 /************************************************************************
2  * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
3  * Copyright(c) 2002-2007 Neterion Inc.
4
5  * This software may be used and distributed according to the terms of
6  * the GNU General Public License (GPL), incorporated herein by reference.
7  * Drivers based on or derived from this code fall under the GPL and must
8  * retain the authorship, copyright and license notice.  This file is not
9  * a complete program and may only be used when the entire operating
10  * system is licensed under the GPL.
11  * See the file COPYING in this distribution for more information.
12  *
13  * Credits:
14  * Jeff Garzik          : For pointing out the improper error condition
15  *                        check in the s2io_xmit routine and also some
16  *                        issues in the Tx watch dog function. Also for
17  *                        patiently answering all those innumerable
18  *                        questions regaring the 2.6 porting issues.
19  * Stephen Hemminger    : Providing proper 2.6 porting mechanism for some
20  *                        macros available only in 2.6 Kernel.
21  * Francois Romieu      : For pointing out all code part that were
22  *                        deprecated and also styling related comments.
23  * Grant Grundler       : For helping me get rid of some Architecture
24  *                        dependent code.
25  * Christopher Hellwig  : Some more 2.6 specific issues in the driver.
26  *
27  * The module loadable parameters that are supported by the driver and a brief
28  * explaination of all the variables.
29  *
30  * rx_ring_num : This can be used to program the number of receive rings used
31  * in the driver.
32  * rx_ring_sz: This defines the number of receive blocks each ring can have.
33  *     This is also an array of size 8.
34  * rx_ring_mode: This defines the operation mode of all 8 rings. The valid
35  *              values are 1, 2.
36  * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
37  * tx_fifo_len: This too is an array of 8. Each element defines the number of
38  * Tx descriptors that can be associated with each corresponding FIFO.
39  * intr_type: This defines the type of interrupt. The values can be 0(INTA),
40  *     2(MSI_X). Default value is '2(MSI_X)'
41  * lro_enable: Specifies whether to enable Large Receive Offload (LRO) or not.
42  *     Possible values '1' for enable '0' for disable. Default is '0'
43  * lro_max_pkts: This parameter defines maximum number of packets can be
44  *     aggregated as a single large packet
45  * napi: This parameter used to enable/disable NAPI (polling Rx)
46  *     Possible values '1' for enable and '0' for disable. Default is '1'
47  * ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO)
48  *      Possible values '1' for enable and '0' for disable. Default is '0'
49  * vlan_tag_strip: This can be used to enable or disable vlan stripping.
50  *                 Possible values '1' for enable , '0' for disable.
51  *                 Default is '2' - which means disable in promisc mode
52  *                 and enable in non-promiscuous mode.
53  * multiq: This parameter used to enable/disable MULTIQUEUE support.
54  *      Possible values '1' for enable and '0' for disable. Default is '0'
55  ************************************************************************/
56
57 #include <linux/module.h>
58 #include <linux/types.h>
59 #include <linux/errno.h>
60 #include <linux/ioport.h>
61 #include <linux/pci.h>
62 #include <linux/dma-mapping.h>
63 #include <linux/kernel.h>
64 #include <linux/netdevice.h>
65 #include <linux/etherdevice.h>
66 #include <linux/skbuff.h>
67 #include <linux/init.h>
68 #include <linux/delay.h>
69 #include <linux/stddef.h>
70 #include <linux/ioctl.h>
71 #include <linux/timex.h>
72 #include <linux/ethtool.h>
73 #include <linux/workqueue.h>
74 #include <linux/if_vlan.h>
75 #include <linux/ip.h>
76 #include <linux/tcp.h>
77 #include <net/tcp.h>
78
79 #include <asm/system.h>
80 #include <asm/uaccess.h>
81 #include <asm/io.h>
82 #include <asm/div64.h>
83 #include <asm/irq.h>
84
85 /* local include */
86 #include "s2io.h"
87 #include "s2io-regs.h"
88
89 #define DRV_VERSION "2.0.26.20"
90
91 /* S2io Driver name & version. */
92 static char s2io_driver_name[] = "Neterion";
93 static char s2io_driver_version[] = DRV_VERSION;
94
95 static int rxd_size[2] = {32,48};
96 static int rxd_count[2] = {127,85};
97
98 static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
99 {
100         int ret;
101
102         ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
103                 (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
104
105         return ret;
106 }
107
108 /*
109  * Cards with following subsystem_id have a link state indication
110  * problem, 600B, 600C, 600D, 640B, 640C and 640D.
111  * macro below identifies these cards given the subsystem_id.
112  */
113 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
114         (dev_type == XFRAME_I_DEVICE) ?                 \
115                 ((((subid >= 0x600B) && (subid <= 0x600D)) || \
116                  ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
117
118 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
119                                       ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
120 #define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
121 #define PANIC   1
122 #define LOW     2
123 static inline int rx_buffer_level(struct s2io_nic * sp, int rxb_size, int ring)
124 {
125         struct mac_info *mac_control;
126
127         mac_control = &sp->mac_control;
128         if (rxb_size <= rxd_count[sp->rxd_mode])
129                 return PANIC;
130         else if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16)
131                 return  LOW;
132         return 0;
133 }
134
135 static inline int is_s2io_card_up(const struct s2io_nic * sp)
136 {
137         return test_bit(__S2IO_STATE_CARD_UP, &sp->state);
138 }
139
140 /* Ethtool related variables and Macros. */
141 static char s2io_gstrings[][ETH_GSTRING_LEN] = {
142         "Register test\t(offline)",
143         "Eeprom test\t(offline)",
144         "Link test\t(online)",
145         "RLDRAM test\t(offline)",
146         "BIST Test\t(offline)"
147 };
148
149 static char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = {
150         {"tmac_frms"},
151         {"tmac_data_octets"},
152         {"tmac_drop_frms"},
153         {"tmac_mcst_frms"},
154         {"tmac_bcst_frms"},
155         {"tmac_pause_ctrl_frms"},
156         {"tmac_ttl_octets"},
157         {"tmac_ucst_frms"},
158         {"tmac_nucst_frms"},
159         {"tmac_any_err_frms"},
160         {"tmac_ttl_less_fb_octets"},
161         {"tmac_vld_ip_octets"},
162         {"tmac_vld_ip"},
163         {"tmac_drop_ip"},
164         {"tmac_icmp"},
165         {"tmac_rst_tcp"},
166         {"tmac_tcp"},
167         {"tmac_udp"},
168         {"rmac_vld_frms"},
169         {"rmac_data_octets"},
170         {"rmac_fcs_err_frms"},
171         {"rmac_drop_frms"},
172         {"rmac_vld_mcst_frms"},
173         {"rmac_vld_bcst_frms"},
174         {"rmac_in_rng_len_err_frms"},
175         {"rmac_out_rng_len_err_frms"},
176         {"rmac_long_frms"},
177         {"rmac_pause_ctrl_frms"},
178         {"rmac_unsup_ctrl_frms"},
179         {"rmac_ttl_octets"},
180         {"rmac_accepted_ucst_frms"},
181         {"rmac_accepted_nucst_frms"},
182         {"rmac_discarded_frms"},
183         {"rmac_drop_events"},
184         {"rmac_ttl_less_fb_octets"},
185         {"rmac_ttl_frms"},
186         {"rmac_usized_frms"},
187         {"rmac_osized_frms"},
188         {"rmac_frag_frms"},
189         {"rmac_jabber_frms"},
190         {"rmac_ttl_64_frms"},
191         {"rmac_ttl_65_127_frms"},
192         {"rmac_ttl_128_255_frms"},
193         {"rmac_ttl_256_511_frms"},
194         {"rmac_ttl_512_1023_frms"},
195         {"rmac_ttl_1024_1518_frms"},
196         {"rmac_ip"},
197         {"rmac_ip_octets"},
198         {"rmac_hdr_err_ip"},
199         {"rmac_drop_ip"},
200         {"rmac_icmp"},
201         {"rmac_tcp"},
202         {"rmac_udp"},
203         {"rmac_err_drp_udp"},
204         {"rmac_xgmii_err_sym"},
205         {"rmac_frms_q0"},
206         {"rmac_frms_q1"},
207         {"rmac_frms_q2"},
208         {"rmac_frms_q3"},
209         {"rmac_frms_q4"},
210         {"rmac_frms_q5"},
211         {"rmac_frms_q6"},
212         {"rmac_frms_q7"},
213         {"rmac_full_q0"},
214         {"rmac_full_q1"},
215         {"rmac_full_q2"},
216         {"rmac_full_q3"},
217         {"rmac_full_q4"},
218         {"rmac_full_q5"},
219         {"rmac_full_q6"},
220         {"rmac_full_q7"},
221         {"rmac_pause_cnt"},
222         {"rmac_xgmii_data_err_cnt"},
223         {"rmac_xgmii_ctrl_err_cnt"},
224         {"rmac_accepted_ip"},
225         {"rmac_err_tcp"},
226         {"rd_req_cnt"},
227         {"new_rd_req_cnt"},
228         {"new_rd_req_rtry_cnt"},
229         {"rd_rtry_cnt"},
230         {"wr_rtry_rd_ack_cnt"},
231         {"wr_req_cnt"},
232         {"new_wr_req_cnt"},
233         {"new_wr_req_rtry_cnt"},
234         {"wr_rtry_cnt"},
235         {"wr_disc_cnt"},
236         {"rd_rtry_wr_ack_cnt"},
237         {"txp_wr_cnt"},
238         {"txd_rd_cnt"},
239         {"txd_wr_cnt"},
240         {"rxd_rd_cnt"},
241         {"rxd_wr_cnt"},
242         {"txf_rd_cnt"},
243         {"rxf_wr_cnt"}
244 };
245
246 static char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = {
247         {"rmac_ttl_1519_4095_frms"},
248         {"rmac_ttl_4096_8191_frms"},
249         {"rmac_ttl_8192_max_frms"},
250         {"rmac_ttl_gt_max_frms"},
251         {"rmac_osized_alt_frms"},
252         {"rmac_jabber_alt_frms"},
253         {"rmac_gt_max_alt_frms"},
254         {"rmac_vlan_frms"},
255         {"rmac_len_discard"},
256         {"rmac_fcs_discard"},
257         {"rmac_pf_discard"},
258         {"rmac_da_discard"},
259         {"rmac_red_discard"},
260         {"rmac_rts_discard"},
261         {"rmac_ingm_full_discard"},
262         {"link_fault_cnt"}
263 };
264
265 static char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
266         {"\n DRIVER STATISTICS"},
267         {"single_bit_ecc_errs"},
268         {"double_bit_ecc_errs"},
269         {"parity_err_cnt"},
270         {"serious_err_cnt"},
271         {"soft_reset_cnt"},
272         {"fifo_full_cnt"},
273         {"ring_0_full_cnt"},
274         {"ring_1_full_cnt"},
275         {"ring_2_full_cnt"},
276         {"ring_3_full_cnt"},
277         {"ring_4_full_cnt"},
278         {"ring_5_full_cnt"},
279         {"ring_6_full_cnt"},
280         {"ring_7_full_cnt"},
281         {"alarm_transceiver_temp_high"},
282         {"alarm_transceiver_temp_low"},
283         {"alarm_laser_bias_current_high"},
284         {"alarm_laser_bias_current_low"},
285         {"alarm_laser_output_power_high"},
286         {"alarm_laser_output_power_low"},
287         {"warn_transceiver_temp_high"},
288         {"warn_transceiver_temp_low"},
289         {"warn_laser_bias_current_high"},
290         {"warn_laser_bias_current_low"},
291         {"warn_laser_output_power_high"},
292         {"warn_laser_output_power_low"},
293         {"lro_aggregated_pkts"},
294         {"lro_flush_both_count"},
295         {"lro_out_of_sequence_pkts"},
296         {"lro_flush_due_to_max_pkts"},
297         {"lro_avg_aggr_pkts"},
298         {"mem_alloc_fail_cnt"},
299         {"pci_map_fail_cnt"},
300         {"watchdog_timer_cnt"},
301         {"mem_allocated"},
302         {"mem_freed"},
303         {"link_up_cnt"},
304         {"link_down_cnt"},
305         {"link_up_time"},
306         {"link_down_time"},
307         {"tx_tcode_buf_abort_cnt"},
308         {"tx_tcode_desc_abort_cnt"},
309         {"tx_tcode_parity_err_cnt"},
310         {"tx_tcode_link_loss_cnt"},
311         {"tx_tcode_list_proc_err_cnt"},
312         {"rx_tcode_parity_err_cnt"},
313         {"rx_tcode_abort_cnt"},
314         {"rx_tcode_parity_abort_cnt"},
315         {"rx_tcode_rda_fail_cnt"},
316         {"rx_tcode_unkn_prot_cnt"},
317         {"rx_tcode_fcs_err_cnt"},
318         {"rx_tcode_buf_size_err_cnt"},
319         {"rx_tcode_rxd_corrupt_cnt"},
320         {"rx_tcode_unkn_err_cnt"},
321         {"tda_err_cnt"},
322         {"pfc_err_cnt"},
323         {"pcc_err_cnt"},
324         {"tti_err_cnt"},
325         {"tpa_err_cnt"},
326         {"sm_err_cnt"},
327         {"lso_err_cnt"},
328         {"mac_tmac_err_cnt"},
329         {"mac_rmac_err_cnt"},
330         {"xgxs_txgxs_err_cnt"},
331         {"xgxs_rxgxs_err_cnt"},
332         {"rc_err_cnt"},
333         {"prc_pcix_err_cnt"},
334         {"rpa_err_cnt"},
335         {"rda_err_cnt"},
336         {"rti_err_cnt"},
337         {"mc_err_cnt"}
338 };
339
340 #define S2IO_XENA_STAT_LEN      ARRAY_SIZE(ethtool_xena_stats_keys)
341 #define S2IO_ENHANCED_STAT_LEN  ARRAY_SIZE(ethtool_enhanced_stats_keys)
342 #define S2IO_DRIVER_STAT_LEN    ARRAY_SIZE(ethtool_driver_stats_keys)
343
344 #define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN )
345 #define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN )
346
347 #define XFRAME_I_STAT_STRINGS_LEN ( XFRAME_I_STAT_LEN * ETH_GSTRING_LEN )
348 #define XFRAME_II_STAT_STRINGS_LEN ( XFRAME_II_STAT_LEN * ETH_GSTRING_LEN )
349
350 #define S2IO_TEST_LEN   ARRAY_SIZE(s2io_gstrings)
351 #define S2IO_STRINGS_LEN        S2IO_TEST_LEN * ETH_GSTRING_LEN
352
353 #define S2IO_TIMER_CONF(timer, handle, arg, exp)                \
354                         init_timer(&timer);                     \
355                         timer.function = handle;                \
356                         timer.data = (unsigned long) arg;       \
357                         mod_timer(&timer, (jiffies + exp))      \
358
359 /* copy mac addr to def_mac_addr array */
360 static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr)
361 {
362         sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr);
363         sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8);
364         sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16);
365         sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24);
366         sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32);
367         sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40);
368 }
369 /* Add the vlan */
370 static void s2io_vlan_rx_register(struct net_device *dev,
371                                         struct vlan_group *grp)
372 {
373         int i;
374         struct s2io_nic *nic = dev->priv;
375         unsigned long flags[MAX_TX_FIFOS];
376         struct mac_info *mac_control = &nic->mac_control;
377         struct config_param *config = &nic->config;
378
379         for (i = 0; i < config->tx_fifo_num; i++)
380                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
381
382         nic->vlgrp = grp;
383         for (i = config->tx_fifo_num - 1; i >= 0; i--)
384                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
385                                 flags[i]);
386 }
387
388 /* A flag indicating whether 'RX_PA_CFG_STRIP_VLAN_TAG' bit is set or not */
389 static int vlan_strip_flag;
390
391 /* Unregister the vlan */
392 static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
393 {
394         int i;
395         struct s2io_nic *nic = dev->priv;
396         unsigned long flags[MAX_TX_FIFOS];
397         struct mac_info *mac_control = &nic->mac_control;
398         struct config_param *config = &nic->config;
399
400         for (i = 0; i < config->tx_fifo_num; i++)
401                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
402
403         if (nic->vlgrp)
404                 vlan_group_set_device(nic->vlgrp, vid, NULL);
405
406         for (i = config->tx_fifo_num - 1; i >= 0; i--)
407                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
408                         flags[i]);
409 }
410
411 /*
412  * Constants to be programmed into the Xena's registers, to configure
413  * the XAUI.
414  */
415
416 #define END_SIGN        0x0
417 static const u64 herc_act_dtx_cfg[] = {
418         /* Set address */
419         0x8000051536750000ULL, 0x80000515367500E0ULL,
420         /* Write data */
421         0x8000051536750004ULL, 0x80000515367500E4ULL,
422         /* Set address */
423         0x80010515003F0000ULL, 0x80010515003F00E0ULL,
424         /* Write data */
425         0x80010515003F0004ULL, 0x80010515003F00E4ULL,
426         /* Set address */
427         0x801205150D440000ULL, 0x801205150D4400E0ULL,
428         /* Write data */
429         0x801205150D440004ULL, 0x801205150D4400E4ULL,
430         /* Set address */
431         0x80020515F2100000ULL, 0x80020515F21000E0ULL,
432         /* Write data */
433         0x80020515F2100004ULL, 0x80020515F21000E4ULL,
434         /* Done */
435         END_SIGN
436 };
437
438 static const u64 xena_dtx_cfg[] = {
439         /* Set address */
440         0x8000051500000000ULL, 0x80000515000000E0ULL,
441         /* Write data */
442         0x80000515D9350004ULL, 0x80000515D93500E4ULL,
443         /* Set address */
444         0x8001051500000000ULL, 0x80010515000000E0ULL,
445         /* Write data */
446         0x80010515001E0004ULL, 0x80010515001E00E4ULL,
447         /* Set address */
448         0x8002051500000000ULL, 0x80020515000000E0ULL,
449         /* Write data */
450         0x80020515F2100004ULL, 0x80020515F21000E4ULL,
451         END_SIGN
452 };
453
454 /*
455  * Constants for Fixing the MacAddress problem seen mostly on
456  * Alpha machines.
457  */
458 static const u64 fix_mac[] = {
459         0x0060000000000000ULL, 0x0060600000000000ULL,
460         0x0040600000000000ULL, 0x0000600000000000ULL,
461         0x0020600000000000ULL, 0x0060600000000000ULL,
462         0x0020600000000000ULL, 0x0060600000000000ULL,
463         0x0020600000000000ULL, 0x0060600000000000ULL,
464         0x0020600000000000ULL, 0x0060600000000000ULL,
465         0x0020600000000000ULL, 0x0060600000000000ULL,
466         0x0020600000000000ULL, 0x0060600000000000ULL,
467         0x0020600000000000ULL, 0x0060600000000000ULL,
468         0x0020600000000000ULL, 0x0060600000000000ULL,
469         0x0020600000000000ULL, 0x0060600000000000ULL,
470         0x0020600000000000ULL, 0x0060600000000000ULL,
471         0x0020600000000000ULL, 0x0000600000000000ULL,
472         0x0040600000000000ULL, 0x0060600000000000ULL,
473         END_SIGN
474 };
475
476 MODULE_LICENSE("GPL");
477 MODULE_VERSION(DRV_VERSION);
478
479
480 /* Module Loadable parameters. */
481 S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM);
482 S2IO_PARM_INT(rx_ring_num, 1);
483 S2IO_PARM_INT(multiq, 0);
484 S2IO_PARM_INT(rx_ring_mode, 1);
485 S2IO_PARM_INT(use_continuous_tx_intrs, 1);
486 S2IO_PARM_INT(rmac_pause_time, 0x100);
487 S2IO_PARM_INT(mc_pause_threshold_q0q3, 187);
488 S2IO_PARM_INT(mc_pause_threshold_q4q7, 187);
489 S2IO_PARM_INT(shared_splits, 0);
490 S2IO_PARM_INT(tmac_util_period, 5);
491 S2IO_PARM_INT(rmac_util_period, 5);
492 S2IO_PARM_INT(l3l4hdr_size, 128);
493 /* 0 is no steering, 1 is Priority steering, 2 is Default steering */
494 S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING);
495 /* Frequency of Rx desc syncs expressed as power of 2 */
496 S2IO_PARM_INT(rxsync_frequency, 3);
497 /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
498 S2IO_PARM_INT(intr_type, 2);
499 /* Large receive offload feature */
500 static unsigned int lro_enable;
501 module_param_named(lro, lro_enable, uint, 0);
502
503 /* Max pkts to be aggregated by LRO at one time. If not specified,
504  * aggregation happens until we hit max IP pkt size(64K)
505  */
506 S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
507 S2IO_PARM_INT(indicate_max_pkts, 0);
508
509 S2IO_PARM_INT(napi, 1);
510 S2IO_PARM_INT(ufo, 0);
511 S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
512
513 static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
514     {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
515 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
516     {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
517 static unsigned int rts_frm_len[MAX_RX_RINGS] =
518     {[0 ...(MAX_RX_RINGS - 1)] = 0 };
519
520 module_param_array(tx_fifo_len, uint, NULL, 0);
521 module_param_array(rx_ring_sz, uint, NULL, 0);
522 module_param_array(rts_frm_len, uint, NULL, 0);
523
524 /*
525  * S2IO device table.
526  * This table lists all the devices that this driver supports.
527  */
528 static struct pci_device_id s2io_tbl[] __devinitdata = {
529         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
530          PCI_ANY_ID, PCI_ANY_ID},
531         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
532          PCI_ANY_ID, PCI_ANY_ID},
533         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
534          PCI_ANY_ID, PCI_ANY_ID},
535         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
536          PCI_ANY_ID, PCI_ANY_ID},
537         {0,}
538 };
539
540 MODULE_DEVICE_TABLE(pci, s2io_tbl);
541
542 static struct pci_error_handlers s2io_err_handler = {
543         .error_detected = s2io_io_error_detected,
544         .slot_reset = s2io_io_slot_reset,
545         .resume = s2io_io_resume,
546 };
547
548 static struct pci_driver s2io_driver = {
549       .name = "S2IO",
550       .id_table = s2io_tbl,
551       .probe = s2io_init_nic,
552       .remove = __devexit_p(s2io_rem_nic),
553       .err_handler = &s2io_err_handler,
554 };
555
556 /* A simplifier macro used both by init and free shared_mem Fns(). */
557 #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
558
559 /* netqueue manipulation helper functions */
560 static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
561 {
562         int i;
563 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
564         if (sp->config.multiq) {
565                 for (i = 0; i < sp->config.tx_fifo_num; i++)
566                         netif_stop_subqueue(sp->dev, i);
567         } else
568 #endif
569         {
570                 for (i = 0; i < sp->config.tx_fifo_num; i++)
571                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
572                 netif_stop_queue(sp->dev);
573         }
574 }
575
576 static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
577 {
578 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
579         if (sp->config.multiq)
580                 netif_stop_subqueue(sp->dev, fifo_no);
581         else
582 #endif
583         {
584                 sp->mac_control.fifos[fifo_no].queue_state =
585                         FIFO_QUEUE_STOP;
586                 netif_stop_queue(sp->dev);
587         }
588 }
589
590 static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
591 {
592         int i;
593 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
594         if (sp->config.multiq) {
595                 for (i = 0; i < sp->config.tx_fifo_num; i++)
596                         netif_start_subqueue(sp->dev, i);
597         } else
598 #endif
599         {
600                 for (i = 0; i < sp->config.tx_fifo_num; i++)
601                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
602                 netif_start_queue(sp->dev);
603         }
604 }
605
606 static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
607 {
608 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
609         if (sp->config.multiq)
610                 netif_start_subqueue(sp->dev, fifo_no);
611         else
612 #endif
613         {
614                 sp->mac_control.fifos[fifo_no].queue_state =
615                         FIFO_QUEUE_START;
616                 netif_start_queue(sp->dev);
617         }
618 }
619
620 static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
621 {
622         int i;
623 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
624         if (sp->config.multiq) {
625                 for (i = 0; i < sp->config.tx_fifo_num; i++)
626                         netif_wake_subqueue(sp->dev, i);
627         } else
628 #endif
629         {
630                 for (i = 0; i < sp->config.tx_fifo_num; i++)
631                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
632                 netif_wake_queue(sp->dev);
633         }
634 }
635
636 static inline void s2io_wake_tx_queue(
637         struct fifo_info *fifo, int cnt, u8 multiq)
638 {
639
640 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
641         if (multiq) {
642                 if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
643                         netif_wake_subqueue(fifo->dev, fifo->fifo_no);
644         } else
645 #endif
646         if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
647                 if (netif_queue_stopped(fifo->dev)) {
648                         fifo->queue_state = FIFO_QUEUE_START;
649                         netif_wake_queue(fifo->dev);
650                 }
651         }
652 }
653
654 /**
655  * init_shared_mem - Allocation and Initialization of Memory
656  * @nic: Device private variable.
657  * Description: The function allocates all the memory areas shared
658  * between the NIC and the driver. This includes Tx descriptors,
659  * Rx descriptors and the statistics block.
660  */
661
662 static int init_shared_mem(struct s2io_nic *nic)
663 {
664         u32 size;
665         void *tmp_v_addr, *tmp_v_addr_next;
666         dma_addr_t tmp_p_addr, tmp_p_addr_next;
667         struct RxD_block *pre_rxd_blk = NULL;
668         int i, j, blk_cnt;
669         int lst_size, lst_per_page;
670         struct net_device *dev = nic->dev;
671         unsigned long tmp;
672         struct buffAdd *ba;
673
674         struct mac_info *mac_control;
675         struct config_param *config;
676         unsigned long long mem_allocated = 0;
677
678         mac_control = &nic->mac_control;
679         config = &nic->config;
680
681
682         /* Allocation and initialization of TXDLs in FIOFs */
683         size = 0;
684         for (i = 0; i < config->tx_fifo_num; i++) {
685                 size += config->tx_cfg[i].fifo_len;
686         }
687         if (size > MAX_AVAILABLE_TXDS) {
688                 DBG_PRINT(ERR_DBG, "s2io: Requested TxDs too high, ");
689                 DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
690                 return -EINVAL;
691         }
692
693         size = 0;
694         for (i = 0; i < config->tx_fifo_num; i++) {
695                 size = config->tx_cfg[i].fifo_len;
696                 /*
697                  * Legal values are from 2 to 8192
698                  */
699                 if (size < 2) {
700                         DBG_PRINT(ERR_DBG, "s2io: Invalid fifo len (%d)", size);
701                         DBG_PRINT(ERR_DBG, "for fifo %d\n", i);
702                         DBG_PRINT(ERR_DBG, "s2io: Legal values for fifo len"
703                                 "are 2 to 8192\n");
704                         return -EINVAL;
705                 }
706         }
707
708         lst_size = (sizeof(struct TxD) * config->max_txds);
709         lst_per_page = PAGE_SIZE / lst_size;
710
711         for (i = 0; i < config->tx_fifo_num; i++) {
712                 int fifo_len = config->tx_cfg[i].fifo_len;
713                 int list_holder_size = fifo_len * sizeof(struct list_info_hold);
714                 mac_control->fifos[i].list_info = kzalloc(list_holder_size,
715                                                           GFP_KERNEL);
716                 if (!mac_control->fifos[i].list_info) {
717                         DBG_PRINT(INFO_DBG,
718                                   "Malloc failed for list_info\n");
719                         return -ENOMEM;
720                 }
721                 mem_allocated += list_holder_size;
722         }
723         for (i = 0; i < config->tx_fifo_num; i++) {
724                 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
725                                                 lst_per_page);
726                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
727                 mac_control->fifos[i].tx_curr_put_info.fifo_len =
728                     config->tx_cfg[i].fifo_len - 1;
729                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
730                 mac_control->fifos[i].tx_curr_get_info.fifo_len =
731                     config->tx_cfg[i].fifo_len - 1;
732                 mac_control->fifos[i].fifo_no = i;
733                 mac_control->fifos[i].nic = nic;
734                 mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2;
735                 mac_control->fifos[i].dev = dev;
736
737                 for (j = 0; j < page_num; j++) {
738                         int k = 0;
739                         dma_addr_t tmp_p;
740                         void *tmp_v;
741                         tmp_v = pci_alloc_consistent(nic->pdev,
742                                                      PAGE_SIZE, &tmp_p);
743                         if (!tmp_v) {
744                                 DBG_PRINT(INFO_DBG,
745                                           "pci_alloc_consistent ");
746                                 DBG_PRINT(INFO_DBG, "failed for TxDL\n");
747                                 return -ENOMEM;
748                         }
749                         /* If we got a zero DMA address(can happen on
750                          * certain platforms like PPC), reallocate.
751                          * Store virtual address of page we don't want,
752                          * to be freed later.
753                          */
754                         if (!tmp_p) {
755                                 mac_control->zerodma_virt_addr = tmp_v;
756                                 DBG_PRINT(INIT_DBG,
757                                 "%s: Zero DMA address for TxDL. ", dev->name);
758                                 DBG_PRINT(INIT_DBG,
759                                 "Virtual address %p\n", tmp_v);
760                                 tmp_v = pci_alloc_consistent(nic->pdev,
761                                                      PAGE_SIZE, &tmp_p);
762                                 if (!tmp_v) {
763                                         DBG_PRINT(INFO_DBG,
764                                           "pci_alloc_consistent ");
765                                         DBG_PRINT(INFO_DBG, "failed for TxDL\n");
766                                         return -ENOMEM;
767                                 }
768                                 mem_allocated += PAGE_SIZE;
769                         }
770                         while (k < lst_per_page) {
771                                 int l = (j * lst_per_page) + k;
772                                 if (l == config->tx_cfg[i].fifo_len)
773                                         break;
774                                 mac_control->fifos[i].list_info[l].list_virt_addr =
775                                     tmp_v + (k * lst_size);
776                                 mac_control->fifos[i].list_info[l].list_phy_addr =
777                                     tmp_p + (k * lst_size);
778                                 k++;
779                         }
780                 }
781         }
782
783         for (i = 0; i < config->tx_fifo_num; i++) {
784                 size = config->tx_cfg[i].fifo_len;
785                 mac_control->fifos[i].ufo_in_band_v
786                         = kcalloc(size, sizeof(u64), GFP_KERNEL);
787                 if (!mac_control->fifos[i].ufo_in_band_v)
788                         return -ENOMEM;
789                 mem_allocated += (size * sizeof(u64));
790         }
791
792         /* Allocation and initialization of RXDs in Rings */
793         size = 0;
794         for (i = 0; i < config->rx_ring_num; i++) {
795                 if (config->rx_cfg[i].num_rxd %
796                     (rxd_count[nic->rxd_mode] + 1)) {
797                         DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
798                         DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ",
799                                   i);
800                         DBG_PRINT(ERR_DBG, "RxDs per Block");
801                         return FAILURE;
802                 }
803                 size += config->rx_cfg[i].num_rxd;
804                 mac_control->rings[i].block_count =
805                         config->rx_cfg[i].num_rxd /
806                         (rxd_count[nic->rxd_mode] + 1 );
807                 mac_control->rings[i].pkt_cnt = config->rx_cfg[i].num_rxd -
808                         mac_control->rings[i].block_count;
809         }
810         if (nic->rxd_mode == RXD_MODE_1)
811                 size = (size * (sizeof(struct RxD1)));
812         else
813                 size = (size * (sizeof(struct RxD3)));
814
815         for (i = 0; i < config->rx_ring_num; i++) {
816                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
817                 mac_control->rings[i].rx_curr_get_info.offset = 0;
818                 mac_control->rings[i].rx_curr_get_info.ring_len =
819                     config->rx_cfg[i].num_rxd - 1;
820                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
821                 mac_control->rings[i].rx_curr_put_info.offset = 0;
822                 mac_control->rings[i].rx_curr_put_info.ring_len =
823                     config->rx_cfg[i].num_rxd - 1;
824                 mac_control->rings[i].nic = nic;
825                 mac_control->rings[i].ring_no = i;
826
827                 blk_cnt = config->rx_cfg[i].num_rxd /
828                                 (rxd_count[nic->rxd_mode] + 1);
829                 /*  Allocating all the Rx blocks */
830                 for (j = 0; j < blk_cnt; j++) {
831                         struct rx_block_info *rx_blocks;
832                         int l;
833
834                         rx_blocks = &mac_control->rings[i].rx_blocks[j];
835                         size = SIZE_OF_BLOCK; //size is always page size
836                         tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
837                                                           &tmp_p_addr);
838                         if (tmp_v_addr == NULL) {
839                                 /*
840                                  * In case of failure, free_shared_mem()
841                                  * is called, which should free any
842                                  * memory that was alloced till the
843                                  * failure happened.
844                                  */
845                                 rx_blocks->block_virt_addr = tmp_v_addr;
846                                 return -ENOMEM;
847                         }
848                         mem_allocated += size;
849                         memset(tmp_v_addr, 0, size);
850                         rx_blocks->block_virt_addr = tmp_v_addr;
851                         rx_blocks->block_dma_addr = tmp_p_addr;
852                         rx_blocks->rxds = kmalloc(sizeof(struct rxd_info)*
853                                                   rxd_count[nic->rxd_mode],
854                                                   GFP_KERNEL);
855                         if (!rx_blocks->rxds)
856                                 return -ENOMEM;
857                         mem_allocated +=
858                         (sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
859                         for (l=0; l<rxd_count[nic->rxd_mode];l++) {
860                                 rx_blocks->rxds[l].virt_addr =
861                                         rx_blocks->block_virt_addr +
862                                         (rxd_size[nic->rxd_mode] * l);
863                                 rx_blocks->rxds[l].dma_addr =
864                                         rx_blocks->block_dma_addr +
865                                         (rxd_size[nic->rxd_mode] * l);
866                         }
867                 }
868                 /* Interlinking all Rx Blocks */
869                 for (j = 0; j < blk_cnt; j++) {
870                         tmp_v_addr =
871                                 mac_control->rings[i].rx_blocks[j].block_virt_addr;
872                         tmp_v_addr_next =
873                                 mac_control->rings[i].rx_blocks[(j + 1) %
874                                               blk_cnt].block_virt_addr;
875                         tmp_p_addr =
876                                 mac_control->rings[i].rx_blocks[j].block_dma_addr;
877                         tmp_p_addr_next =
878                                 mac_control->rings[i].rx_blocks[(j + 1) %
879                                               blk_cnt].block_dma_addr;
880
881                         pre_rxd_blk = (struct RxD_block *) tmp_v_addr;
882                         pre_rxd_blk->reserved_2_pNext_RxD_block =
883                             (unsigned long) tmp_v_addr_next;
884                         pre_rxd_blk->pNext_RxD_Blk_physical =
885                             (u64) tmp_p_addr_next;
886                 }
887         }
888         if (nic->rxd_mode == RXD_MODE_3B) {
889                 /*
890                  * Allocation of Storages for buffer addresses in 2BUFF mode
891                  * and the buffers as well.
892                  */
893                 for (i = 0; i < config->rx_ring_num; i++) {
894                         blk_cnt = config->rx_cfg[i].num_rxd /
895                            (rxd_count[nic->rxd_mode]+ 1);
896                         mac_control->rings[i].ba =
897                                 kmalloc((sizeof(struct buffAdd *) * blk_cnt),
898                                      GFP_KERNEL);
899                         if (!mac_control->rings[i].ba)
900                                 return -ENOMEM;
901                         mem_allocated +=(sizeof(struct buffAdd *) * blk_cnt);
902                         for (j = 0; j < blk_cnt; j++) {
903                                 int k = 0;
904                                 mac_control->rings[i].ba[j] =
905                                         kmalloc((sizeof(struct buffAdd) *
906                                                 (rxd_count[nic->rxd_mode] + 1)),
907                                                 GFP_KERNEL);
908                                 if (!mac_control->rings[i].ba[j])
909                                         return -ENOMEM;
910                                 mem_allocated += (sizeof(struct buffAdd) *  \
911                                         (rxd_count[nic->rxd_mode] + 1));
912                                 while (k != rxd_count[nic->rxd_mode]) {
913                                         ba = &mac_control->rings[i].ba[j][k];
914
915                                         ba->ba_0_org = (void *) kmalloc
916                                             (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
917                                         if (!ba->ba_0_org)
918                                                 return -ENOMEM;
919                                         mem_allocated +=
920                                                 (BUF0_LEN + ALIGN_SIZE);
921                                         tmp = (unsigned long)ba->ba_0_org;
922                                         tmp += ALIGN_SIZE;
923                                         tmp &= ~((unsigned long) ALIGN_SIZE);
924                                         ba->ba_0 = (void *) tmp;
925
926                                         ba->ba_1_org = (void *) kmalloc
927                                             (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
928                                         if (!ba->ba_1_org)
929                                                 return -ENOMEM;
930                                         mem_allocated
931                                                 += (BUF1_LEN + ALIGN_SIZE);
932                                         tmp = (unsigned long) ba->ba_1_org;
933                                         tmp += ALIGN_SIZE;
934                                         tmp &= ~((unsigned long) ALIGN_SIZE);
935                                         ba->ba_1 = (void *) tmp;
936                                         k++;
937                                 }
938                         }
939                 }
940         }
941
942         /* Allocation and initialization of Statistics block */
943         size = sizeof(struct stat_block);
944         mac_control->stats_mem = pci_alloc_consistent
945             (nic->pdev, size, &mac_control->stats_mem_phy);
946
947         if (!mac_control->stats_mem) {
948                 /*
949                  * In case of failure, free_shared_mem() is called, which
950                  * should free any memory that was alloced till the
951                  * failure happened.
952                  */
953                 return -ENOMEM;
954         }
955         mem_allocated += size;
956         mac_control->stats_mem_sz = size;
957
958         tmp_v_addr = mac_control->stats_mem;
959         mac_control->stats_info = (struct stat_block *) tmp_v_addr;
960         memset(tmp_v_addr, 0, size);
961         DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
962                   (unsigned long long) tmp_p_addr);
963         mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
964         return SUCCESS;
965 }
966
967 /**
968  * free_shared_mem - Free the allocated Memory
969  * @nic:  Device private variable.
970  * Description: This function is to free all memory locations allocated by
971  * the init_shared_mem() function and return it to the kernel.
972  */
973
974 static void free_shared_mem(struct s2io_nic *nic)
975 {
976         int i, j, blk_cnt, size;
977         void *tmp_v_addr;
978         dma_addr_t tmp_p_addr;
979         struct mac_info *mac_control;
980         struct config_param *config;
981         int lst_size, lst_per_page;
982         struct net_device *dev;
983         int page_num = 0;
984
985         if (!nic)
986                 return;
987
988         dev = nic->dev;
989
990         mac_control = &nic->mac_control;
991         config = &nic->config;
992
993         lst_size = (sizeof(struct TxD) * config->max_txds);
994         lst_per_page = PAGE_SIZE / lst_size;
995
996         for (i = 0; i < config->tx_fifo_num; i++) {
997                 page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
998                                                         lst_per_page);
999                 for (j = 0; j < page_num; j++) {
1000                         int mem_blks = (j * lst_per_page);
1001                         if (!mac_control->fifos[i].list_info)
1002                                 return;
1003                         if (!mac_control->fifos[i].list_info[mem_blks].
1004                                  list_virt_addr)
1005                                 break;
1006                         pci_free_consistent(nic->pdev, PAGE_SIZE,
1007                                             mac_control->fifos[i].
1008                                             list_info[mem_blks].
1009                                             list_virt_addr,
1010                                             mac_control->fifos[i].
1011                                             list_info[mem_blks].
1012                                             list_phy_addr);
1013                         nic->mac_control.stats_info->sw_stat.mem_freed
1014                                                 += PAGE_SIZE;
1015                 }
1016                 /* If we got a zero DMA address during allocation,
1017                  * free the page now
1018                  */
1019                 if (mac_control->zerodma_virt_addr) {
1020                         pci_free_consistent(nic->pdev, PAGE_SIZE,
1021                                             mac_control->zerodma_virt_addr,
1022                                             (dma_addr_t)0);
1023                         DBG_PRINT(INIT_DBG,
1024                                 "%s: Freeing TxDL with zero DMA addr. ",
1025                                 dev->name);
1026                         DBG_PRINT(INIT_DBG, "Virtual address %p\n",
1027                                 mac_control->zerodma_virt_addr);
1028                         nic->mac_control.stats_info->sw_stat.mem_freed
1029                                                 += PAGE_SIZE;
1030                 }
1031                 kfree(mac_control->fifos[i].list_info);
1032                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1033                 (nic->config.tx_cfg[i].fifo_len *sizeof(struct list_info_hold));
1034         }
1035
1036         size = SIZE_OF_BLOCK;
1037         for (i = 0; i < config->rx_ring_num; i++) {
1038                 blk_cnt = mac_control->rings[i].block_count;
1039                 for (j = 0; j < blk_cnt; j++) {
1040                         tmp_v_addr = mac_control->rings[i].rx_blocks[j].
1041                                 block_virt_addr;
1042                         tmp_p_addr = mac_control->rings[i].rx_blocks[j].
1043                                 block_dma_addr;
1044                         if (tmp_v_addr == NULL)
1045                                 break;
1046                         pci_free_consistent(nic->pdev, size,
1047                                             tmp_v_addr, tmp_p_addr);
1048                         nic->mac_control.stats_info->sw_stat.mem_freed += size;
1049                         kfree(mac_control->rings[i].rx_blocks[j].rxds);
1050                         nic->mac_control.stats_info->sw_stat.mem_freed +=
1051                         ( sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
1052                 }
1053         }
1054
1055         if (nic->rxd_mode == RXD_MODE_3B) {
1056                 /* Freeing buffer storage addresses in 2BUFF mode. */
1057                 for (i = 0; i < config->rx_ring_num; i++) {
1058                         blk_cnt = config->rx_cfg[i].num_rxd /
1059                             (rxd_count[nic->rxd_mode] + 1);
1060                         for (j = 0; j < blk_cnt; j++) {
1061                                 int k = 0;
1062                                 if (!mac_control->rings[i].ba[j])
1063                                         continue;
1064                                 while (k != rxd_count[nic->rxd_mode]) {
1065                                         struct buffAdd *ba =
1066                                                 &mac_control->rings[i].ba[j][k];
1067                                         kfree(ba->ba_0_org);
1068                                         nic->mac_control.stats_info->sw_stat.\
1069                                         mem_freed += (BUF0_LEN + ALIGN_SIZE);
1070                                         kfree(ba->ba_1_org);
1071                                         nic->mac_control.stats_info->sw_stat.\
1072                                         mem_freed += (BUF1_LEN + ALIGN_SIZE);
1073                                         k++;
1074                                 }
1075                                 kfree(mac_control->rings[i].ba[j]);
1076                                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1077                                         (sizeof(struct buffAdd) *
1078                                         (rxd_count[nic->rxd_mode] + 1));
1079                         }
1080                         kfree(mac_control->rings[i].ba);
1081                         nic->mac_control.stats_info->sw_stat.mem_freed +=
1082                         (sizeof(struct buffAdd *) * blk_cnt);
1083                 }
1084         }
1085
1086         for (i = 0; i < nic->config.tx_fifo_num; i++) {
1087                 if (mac_control->fifos[i].ufo_in_band_v) {
1088                         nic->mac_control.stats_info->sw_stat.mem_freed
1089                                 += (config->tx_cfg[i].fifo_len * sizeof(u64));
1090                         kfree(mac_control->fifos[i].ufo_in_band_v);
1091                 }
1092         }
1093
1094         if (mac_control->stats_mem) {
1095                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1096                         mac_control->stats_mem_sz;
1097                 pci_free_consistent(nic->pdev,
1098                                     mac_control->stats_mem_sz,
1099                                     mac_control->stats_mem,
1100                                     mac_control->stats_mem_phy);
1101         }
1102 }
1103
1104 /**
1105  * s2io_verify_pci_mode -
1106  */
1107
1108 static int s2io_verify_pci_mode(struct s2io_nic *nic)
1109 {
1110         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1111         register u64 val64 = 0;
1112         int     mode;
1113
1114         val64 = readq(&bar0->pci_mode);
1115         mode = (u8)GET_PCI_MODE(val64);
1116
1117         if ( val64 & PCI_MODE_UNKNOWN_MODE)
1118                 return -1;      /* Unknown PCI mode */
1119         return mode;
1120 }
1121
1122 #define NEC_VENID   0x1033
1123 #define NEC_DEVID   0x0125
1124 static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev)
1125 {
1126         struct pci_dev *tdev = NULL;
1127         while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
1128                 if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
1129                         if (tdev->bus == s2io_pdev->bus->parent)
1130                                 pci_dev_put(tdev);
1131                                 return 1;
1132                 }
1133         }
1134         return 0;
1135 }
1136
1137 static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266};
1138 /**
1139  * s2io_print_pci_mode -
1140  */
1141 static int s2io_print_pci_mode(struct s2io_nic *nic)
1142 {
1143         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1144         register u64 val64 = 0;
1145         int     mode;
1146         struct config_param *config = &nic->config;
1147
1148         val64 = readq(&bar0->pci_mode);
1149         mode = (u8)GET_PCI_MODE(val64);
1150
1151         if ( val64 & PCI_MODE_UNKNOWN_MODE)
1152                 return -1;      /* Unknown PCI mode */
1153
1154         config->bus_speed = bus_speed[mode];
1155
1156         if (s2io_on_nec_bridge(nic->pdev)) {
1157                 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
1158                                                         nic->dev->name);
1159                 return mode;
1160         }
1161
1162         if (val64 & PCI_MODE_32_BITS) {
1163                 DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
1164         } else {
1165                 DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
1166         }
1167
1168         switch(mode) {
1169                 case PCI_MODE_PCI_33:
1170                         DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
1171                         break;
1172                 case PCI_MODE_PCI_66:
1173                         DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
1174                         break;
1175                 case PCI_MODE_PCIX_M1_66:
1176                         DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
1177                         break;
1178                 case PCI_MODE_PCIX_M1_100:
1179                         DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
1180                         break;
1181                 case PCI_MODE_PCIX_M1_133:
1182                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
1183                         break;
1184                 case PCI_MODE_PCIX_M2_66:
1185                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
1186                         break;
1187                 case PCI_MODE_PCIX_M2_100:
1188                         DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
1189                         break;
1190                 case PCI_MODE_PCIX_M2_133:
1191                         DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
1192                         break;
1193                 default:
1194                         return -1;      /* Unsupported bus speed */
1195         }
1196
1197         return mode;
1198 }
1199
1200 /**
1201  *  init_tti - Initialization transmit traffic interrupt scheme
1202  *  @nic: device private variable
1203  *  @link: link status (UP/DOWN) used to enable/disable continuous
1204  *  transmit interrupts
1205  *  Description: The function configures transmit traffic interrupts
1206  *  Return Value:  SUCCESS on success and
1207  *  '-1' on failure
1208  */
1209
1210 static int init_tti(struct s2io_nic *nic, int link)
1211 {
1212         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1213         register u64 val64 = 0;
1214         int i;
1215         struct config_param *config;
1216
1217         config = &nic->config;
1218
1219         for (i = 0; i < config->tx_fifo_num; i++) {
1220                 /*
1221                  * TTI Initialization. Default Tx timer gets us about
1222                  * 250 interrupts per sec. Continuous interrupts are enabled
1223                  * by default.
1224                  */
1225                 if (nic->device_type == XFRAME_II_DEVICE) {
1226                         int count = (nic->config.bus_speed * 125)/2;
1227                         val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
1228                 } else
1229                         val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
1230
1231                 val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
1232                                 TTI_DATA1_MEM_TX_URNG_B(0x10) |
1233                                 TTI_DATA1_MEM_TX_URNG_C(0x30) |
1234                                 TTI_DATA1_MEM_TX_TIMER_AC_EN;
1235
1236                 if (use_continuous_tx_intrs && (link == LINK_UP))
1237                         val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
1238                 writeq(val64, &bar0->tti_data1_mem);
1239
1240                 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1241                                 TTI_DATA2_MEM_TX_UFC_B(0x20) |
1242                                 TTI_DATA2_MEM_TX_UFC_C(0x40) |
1243                                 TTI_DATA2_MEM_TX_UFC_D(0x80);
1244
1245                 writeq(val64, &bar0->tti_data2_mem);
1246
1247                 val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD |
1248                                 TTI_CMD_MEM_OFFSET(i);
1249                 writeq(val64, &bar0->tti_command_mem);
1250
1251                 if (wait_for_cmd_complete(&bar0->tti_command_mem,
1252                         TTI_CMD_MEM_STROBE_NEW_CMD, S2IO_BIT_RESET) != SUCCESS)
1253                         return FAILURE;
1254         }
1255
1256         return SUCCESS;
1257 }
1258
1259 /**
1260  *  init_nic - Initialization of hardware
1261  *  @nic: device private variable
1262  *  Description: The function sequentially configures every block
1263  *  of the H/W from their reset values.
1264  *  Return Value:  SUCCESS on success and
1265  *  '-1' on failure (endian settings incorrect).
1266  */
1267
1268 static int init_nic(struct s2io_nic *nic)
1269 {
1270         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1271         struct net_device *dev = nic->dev;
1272         register u64 val64 = 0;
1273         void __iomem *add;
1274         u32 time;
1275         int i, j;
1276         struct mac_info *mac_control;
1277         struct config_param *config;
1278         int dtx_cnt = 0;
1279         unsigned long long mem_share;
1280         int mem_size;
1281
1282         mac_control = &nic->mac_control;
1283         config = &nic->config;
1284
1285         /* to set the swapper controle on the card */
1286         if(s2io_set_swapper(nic)) {
1287                 DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
1288                 return -EIO;
1289         }
1290
1291         /*
1292          * Herc requires EOI to be removed from reset before XGXS, so..
1293          */
1294         if (nic->device_type & XFRAME_II_DEVICE) {
1295                 val64 = 0xA500000000ULL;
1296                 writeq(val64, &bar0->sw_reset);
1297                 msleep(500);
1298                 val64 = readq(&bar0->sw_reset);
1299         }
1300
1301         /* Remove XGXS from reset state */
1302         val64 = 0;
1303         writeq(val64, &bar0->sw_reset);
1304         msleep(500);
1305         val64 = readq(&bar0->sw_reset);
1306
1307         /* Ensure that it's safe to access registers by checking
1308          * RIC_RUNNING bit is reset. Check is valid only for XframeII.
1309          */
1310         if (nic->device_type == XFRAME_II_DEVICE) {
1311                 for (i = 0; i < 50; i++) {
1312                         val64 = readq(&bar0->adapter_status);
1313                         if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
1314                                 break;
1315                         msleep(10);
1316                 }
1317                 if (i == 50)
1318                         return -ENODEV;
1319         }
1320
1321         /*  Enable Receiving broadcasts */
1322         add = &bar0->mac_cfg;
1323         val64 = readq(&bar0->mac_cfg);
1324         val64 |= MAC_RMAC_BCAST_ENABLE;
1325         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1326         writel((u32) val64, add);
1327         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1328         writel((u32) (val64 >> 32), (add + 4));
1329
1330         /* Read registers in all blocks */
1331         val64 = readq(&bar0->mac_int_mask);
1332         val64 = readq(&bar0->mc_int_mask);
1333         val64 = readq(&bar0->xgxs_int_mask);
1334
1335         /*  Set MTU */
1336         val64 = dev->mtu;
1337         writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
1338
1339         if (nic->device_type & XFRAME_II_DEVICE) {
1340                 while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
1341                         SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
1342                                           &bar0->dtx_control, UF);
1343                         if (dtx_cnt & 0x1)
1344                                 msleep(1); /* Necessary!! */
1345                         dtx_cnt++;
1346                 }
1347         } else {
1348                 while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
1349                         SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
1350                                           &bar0->dtx_control, UF);
1351                         val64 = readq(&bar0->dtx_control);
1352                         dtx_cnt++;
1353                 }
1354         }
1355
1356         /*  Tx DMA Initialization */
1357         val64 = 0;
1358         writeq(val64, &bar0->tx_fifo_partition_0);
1359         writeq(val64, &bar0->tx_fifo_partition_1);
1360         writeq(val64, &bar0->tx_fifo_partition_2);
1361         writeq(val64, &bar0->tx_fifo_partition_3);
1362
1363
1364         for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
1365                 val64 |=
1366                     vBIT(config->tx_cfg[i].fifo_len - 1, ((j * 32) + 19),
1367                          13) | vBIT(config->tx_cfg[i].fifo_priority,
1368                                     ((j * 32) + 5), 3);
1369
1370                 if (i == (config->tx_fifo_num - 1)) {
1371                         if (i % 2 == 0)
1372                                 i++;
1373                 }
1374
1375                 switch (i) {
1376                 case 1:
1377                         writeq(val64, &bar0->tx_fifo_partition_0);
1378                         val64 = 0;
1379                         j = 0;
1380                         break;
1381                 case 3:
1382                         writeq(val64, &bar0->tx_fifo_partition_1);
1383                         val64 = 0;
1384                         j = 0;
1385                         break;
1386                 case 5:
1387                         writeq(val64, &bar0->tx_fifo_partition_2);
1388                         val64 = 0;
1389                         j = 0;
1390                         break;
1391                 case 7:
1392                         writeq(val64, &bar0->tx_fifo_partition_3);
1393                         val64 = 0;
1394                         j = 0;
1395                         break;
1396                 default:
1397                         j++;
1398                         break;
1399                 }
1400         }
1401
1402         /*
1403          * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
1404          * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
1405          */
1406         if ((nic->device_type == XFRAME_I_DEVICE) &&
1407                 (nic->pdev->revision < 4))
1408                 writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
1409
1410         val64 = readq(&bar0->tx_fifo_partition_0);
1411         DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
1412                   &bar0->tx_fifo_partition_0, (unsigned long long) val64);
1413
1414         /*
1415          * Initialization of Tx_PA_CONFIG register to ignore packet
1416          * integrity checking.
1417          */
1418         val64 = readq(&bar0->tx_pa_cfg);
1419         val64 |= TX_PA_CFG_IGNORE_FRM_ERR | TX_PA_CFG_IGNORE_SNAP_OUI |
1420             TX_PA_CFG_IGNORE_LLC_CTRL | TX_PA_CFG_IGNORE_L2_ERR;
1421         writeq(val64, &bar0->tx_pa_cfg);
1422
1423         /* Rx DMA intialization. */
1424         val64 = 0;
1425         for (i = 0; i < config->rx_ring_num; i++) {
1426                 val64 |=
1427                     vBIT(config->rx_cfg[i].ring_priority, (5 + (i * 8)),
1428                          3);
1429         }
1430         writeq(val64, &bar0->rx_queue_priority);
1431
1432         /*
1433          * Allocating equal share of memory to all the
1434          * configured Rings.
1435          */
1436         val64 = 0;
1437         if (nic->device_type & XFRAME_II_DEVICE)
1438                 mem_size = 32;
1439         else
1440                 mem_size = 64;
1441
1442         for (i = 0; i < config->rx_ring_num; i++) {
1443                 switch (i) {
1444                 case 0:
1445                         mem_share = (mem_size / config->rx_ring_num +
1446                                      mem_size % config->rx_ring_num);
1447                         val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
1448                         continue;
1449                 case 1:
1450                         mem_share = (mem_size / config->rx_ring_num);
1451                         val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
1452                         continue;
1453                 case 2:
1454                         mem_share = (mem_size / config->rx_ring_num);
1455                         val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
1456                         continue;
1457                 case 3:
1458                         mem_share = (mem_size / config->rx_ring_num);
1459                         val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
1460                         continue;
1461                 case 4:
1462                         mem_share = (mem_size / config->rx_ring_num);
1463                         val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
1464                         continue;
1465                 case 5:
1466                         mem_share = (mem_size / config->rx_ring_num);
1467                         val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
1468                         continue;
1469                 case 6:
1470                         mem_share = (mem_size / config->rx_ring_num);
1471                         val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
1472                         continue;
1473                 case 7:
1474                         mem_share = (mem_size / config->rx_ring_num);
1475                         val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
1476                         continue;
1477                 }
1478         }
1479         writeq(val64, &bar0->rx_queue_cfg);
1480
1481         /*
1482          * Filling Tx round robin registers
1483          * as per the number of FIFOs for equal scheduling priority
1484          */
1485         switch (config->tx_fifo_num) {
1486         case 1:
1487                 val64 = 0x0;
1488                 writeq(val64, &bar0->tx_w_round_robin_0);
1489                 writeq(val64, &bar0->tx_w_round_robin_1);
1490                 writeq(val64, &bar0->tx_w_round_robin_2);
1491                 writeq(val64, &bar0->tx_w_round_robin_3);
1492                 writeq(val64, &bar0->tx_w_round_robin_4);
1493                 break;
1494         case 2:
1495                 val64 = 0x0001000100010001ULL;
1496                 writeq(val64, &bar0->tx_w_round_robin_0);
1497                 writeq(val64, &bar0->tx_w_round_robin_1);
1498                 writeq(val64, &bar0->tx_w_round_robin_2);
1499                 writeq(val64, &bar0->tx_w_round_robin_3);
1500                 val64 = 0x0001000100000000ULL;
1501                 writeq(val64, &bar0->tx_w_round_robin_4);
1502                 break;
1503         case 3:
1504                 val64 = 0x0001020001020001ULL;
1505                 writeq(val64, &bar0->tx_w_round_robin_0);
1506                 val64 = 0x0200010200010200ULL;
1507                 writeq(val64, &bar0->tx_w_round_robin_1);
1508                 val64 = 0x0102000102000102ULL;
1509                 writeq(val64, &bar0->tx_w_round_robin_2);
1510                 val64 = 0x0001020001020001ULL;
1511                 writeq(val64, &bar0->tx_w_round_robin_3);
1512                 val64 = 0x0200010200000000ULL;
1513                 writeq(val64, &bar0->tx_w_round_robin_4);
1514                 break;
1515         case 4:
1516                 val64 = 0x0001020300010203ULL;
1517                 writeq(val64, &bar0->tx_w_round_robin_0);
1518                 writeq(val64, &bar0->tx_w_round_robin_1);
1519                 writeq(val64, &bar0->tx_w_round_robin_2);
1520                 writeq(val64, &bar0->tx_w_round_robin_3);
1521                 val64 = 0x0001020300000000ULL;
1522                 writeq(val64, &bar0->tx_w_round_robin_4);
1523                 break;
1524         case 5:
1525                 val64 = 0x0001020304000102ULL;
1526                 writeq(val64, &bar0->tx_w_round_robin_0);
1527                 val64 = 0x0304000102030400ULL;
1528                 writeq(val64, &bar0->tx_w_round_robin_1);
1529                 val64 = 0x0102030400010203ULL;
1530                 writeq(val64, &bar0->tx_w_round_robin_2);
1531                 val64 = 0x0400010203040001ULL;
1532                 writeq(val64, &bar0->tx_w_round_robin_3);
1533                 val64 = 0x0203040000000000ULL;
1534                 writeq(val64, &bar0->tx_w_round_robin_4);
1535                 break;
1536         case 6:
1537                 val64 = 0x0001020304050001ULL;
1538                 writeq(val64, &bar0->tx_w_round_robin_0);
1539                 val64 = 0x0203040500010203ULL;
1540                 writeq(val64, &bar0->tx_w_round_robin_1);
1541                 val64 = 0x0405000102030405ULL;
1542                 writeq(val64, &bar0->tx_w_round_robin_2);
1543                 val64 = 0x0001020304050001ULL;
1544                 writeq(val64, &bar0->tx_w_round_robin_3);
1545                 val64 = 0x0203040500000000ULL;
1546                 writeq(val64, &bar0->tx_w_round_robin_4);
1547                 break;
1548         case 7:
1549                 val64 = 0x0001020304050600ULL;
1550                 writeq(val64, &bar0->tx_w_round_robin_0);
1551                 val64 = 0x0102030405060001ULL;
1552                 writeq(val64, &bar0->tx_w_round_robin_1);
1553                 val64 = 0x0203040506000102ULL;
1554                 writeq(val64, &bar0->tx_w_round_robin_2);
1555                 val64 = 0x0304050600010203ULL;
1556                 writeq(val64, &bar0->tx_w_round_robin_3);
1557                 val64 = 0x0405060000000000ULL;
1558                 writeq(val64, &bar0->tx_w_round_robin_4);
1559                 break;
1560         case 8:
1561                 val64 = 0x0001020304050607ULL;
1562                 writeq(val64, &bar0->tx_w_round_robin_0);
1563                 writeq(val64, &bar0->tx_w_round_robin_1);
1564                 writeq(val64, &bar0->tx_w_round_robin_2);
1565                 writeq(val64, &bar0->tx_w_round_robin_3);
1566                 val64 = 0x0001020300000000ULL;
1567                 writeq(val64, &bar0->tx_w_round_robin_4);
1568                 break;
1569         }
1570
1571         /* Enable all configured Tx FIFO partitions */
1572         val64 = readq(&bar0->tx_fifo_partition_0);
1573         val64 |= (TX_FIFO_PARTITION_EN);
1574         writeq(val64, &bar0->tx_fifo_partition_0);
1575
1576         /* Filling the Rx round robin registers as per the
1577          * number of Rings and steering based on QoS.
1578          */
1579         switch (config->rx_ring_num) {
1580         case 1:
1581                 val64 = 0x8080808080808080ULL;
1582                 writeq(val64, &bar0->rts_qos_steering);
1583                 break;
1584         case 2:
1585                 val64 = 0x0000010000010000ULL;
1586                 writeq(val64, &bar0->rx_w_round_robin_0);
1587                 val64 = 0x0100000100000100ULL;
1588                 writeq(val64, &bar0->rx_w_round_robin_1);
1589                 val64 = 0x0001000001000001ULL;
1590                 writeq(val64, &bar0->rx_w_round_robin_2);
1591                 val64 = 0x0000010000010000ULL;
1592                 writeq(val64, &bar0->rx_w_round_robin_3);
1593                 val64 = 0x0100000000000000ULL;
1594                 writeq(val64, &bar0->rx_w_round_robin_4);
1595
1596                 val64 = 0x8080808040404040ULL;
1597                 writeq(val64, &bar0->rts_qos_steering);
1598                 break;
1599         case 3:
1600                 val64 = 0x0001000102000001ULL;
1601                 writeq(val64, &bar0->rx_w_round_robin_0);
1602                 val64 = 0x0001020000010001ULL;
1603                 writeq(val64, &bar0->rx_w_round_robin_1);
1604                 val64 = 0x0200000100010200ULL;
1605                 writeq(val64, &bar0->rx_w_round_robin_2);
1606                 val64 = 0x0001000102000001ULL;
1607                 writeq(val64, &bar0->rx_w_round_robin_3);
1608                 val64 = 0x0001020000000000ULL;
1609                 writeq(val64, &bar0->rx_w_round_robin_4);
1610
1611                 val64 = 0x8080804040402020ULL;
1612                 writeq(val64, &bar0->rts_qos_steering);
1613                 break;
1614         case 4:
1615                 val64 = 0x0001020300010200ULL;
1616                 writeq(val64, &bar0->rx_w_round_robin_0);
1617                 val64 = 0x0100000102030001ULL;
1618                 writeq(val64, &bar0->rx_w_round_robin_1);
1619                 val64 = 0x0200010000010203ULL;
1620                 writeq(val64, &bar0->rx_w_round_robin_2);
1621                 val64 = 0x0001020001000001ULL;
1622                 writeq(val64, &bar0->rx_w_round_robin_3);
1623                 val64 = 0x0203000100000000ULL;
1624                 writeq(val64, &bar0->rx_w_round_robin_4);
1625
1626                 val64 = 0x8080404020201010ULL;
1627                 writeq(val64, &bar0->rts_qos_steering);
1628                 break;
1629         case 5:
1630                 val64 = 0x0001000203000102ULL;
1631                 writeq(val64, &bar0->rx_w_round_robin_0);
1632                 val64 = 0x0001020001030004ULL;
1633                 writeq(val64, &bar0->rx_w_round_robin_1);
1634                 val64 = 0x0001000203000102ULL;
1635                 writeq(val64, &bar0->rx_w_round_robin_2);
1636                 val64 = 0x0001020001030004ULL;
1637                 writeq(val64, &bar0->rx_w_round_robin_3);
1638                 val64 = 0x0001000000000000ULL;
1639                 writeq(val64, &bar0->rx_w_round_robin_4);
1640
1641                 val64 = 0x8080404020201008ULL;
1642                 writeq(val64, &bar0->rts_qos_steering);
1643                 break;
1644         case 6:
1645                 val64 = 0x0001020304000102ULL;
1646                 writeq(val64, &bar0->rx_w_round_robin_0);
1647                 val64 = 0x0304050001020001ULL;
1648                 writeq(val64, &bar0->rx_w_round_robin_1);
1649                 val64 = 0x0203000100000102ULL;
1650                 writeq(val64, &bar0->rx_w_round_robin_2);
1651                 val64 = 0x0304000102030405ULL;
1652                 writeq(val64, &bar0->rx_w_round_robin_3);
1653                 val64 = 0x0001000200000000ULL;
1654                 writeq(val64, &bar0->rx_w_round_robin_4);
1655
1656                 val64 = 0x8080404020100804ULL;
1657                 writeq(val64, &bar0->rts_qos_steering);
1658                 break;
1659         case 7:
1660                 val64 = 0x0001020001020300ULL;
1661                 writeq(val64, &bar0->rx_w_round_robin_0);
1662                 val64 = 0x0102030400010203ULL;
1663                 writeq(val64, &bar0->rx_w_round_robin_1);
1664                 val64 = 0x0405060001020001ULL;
1665                 writeq(val64, &bar0->rx_w_round_robin_2);
1666                 val64 = 0x0304050000010200ULL;
1667                 writeq(val64, &bar0->rx_w_round_robin_3);
1668                 val64 = 0x0102030000000000ULL;
1669                 writeq(val64, &bar0->rx_w_round_robin_4);
1670
1671                 val64 = 0x8080402010080402ULL;
1672                 writeq(val64, &bar0->rts_qos_steering);
1673                 break;
1674         case 8:
1675                 val64 = 0x0001020300040105ULL;
1676                 writeq(val64, &bar0->rx_w_round_robin_0);
1677                 val64 = 0x0200030106000204ULL;
1678                 writeq(val64, &bar0->rx_w_round_robin_1);
1679                 val64 = 0x0103000502010007ULL;
1680                 writeq(val64, &bar0->rx_w_round_robin_2);
1681                 val64 = 0x0304010002060500ULL;
1682                 writeq(val64, &bar0->rx_w_round_robin_3);
1683                 val64 = 0x0103020400000000ULL;
1684                 writeq(val64, &bar0->rx_w_round_robin_4);
1685
1686                 val64 = 0x8040201008040201ULL;
1687                 writeq(val64, &bar0->rts_qos_steering);
1688                 break;
1689         }
1690
1691         /* UDP Fix */
1692         val64 = 0;
1693         for (i = 0; i < 8; i++)
1694                 writeq(val64, &bar0->rts_frm_len_n[i]);
1695
1696         /* Set the default rts frame length for the rings configured */
1697         val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
1698         for (i = 0 ; i < config->rx_ring_num ; i++)
1699                 writeq(val64, &bar0->rts_frm_len_n[i]);
1700
1701         /* Set the frame length for the configured rings
1702          * desired by the user
1703          */
1704         for (i = 0; i < config->rx_ring_num; i++) {
1705                 /* If rts_frm_len[i] == 0 then it is assumed that user not
1706                  * specified frame length steering.
1707                  * If the user provides the frame length then program
1708                  * the rts_frm_len register for those values or else
1709                  * leave it as it is.
1710                  */
1711                 if (rts_frm_len[i] != 0) {
1712                         writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
1713                                 &bar0->rts_frm_len_n[i]);
1714                 }
1715         }
1716
1717         /* Disable differentiated services steering logic */
1718         for (i = 0; i < 64; i++) {
1719                 if (rts_ds_steer(nic, i, 0) == FAILURE) {
1720                         DBG_PRINT(ERR_DBG, "%s: failed rts ds steering",
1721                                 dev->name);
1722                         DBG_PRINT(ERR_DBG, "set on codepoint %d\n", i);
1723                         return -ENODEV;
1724                 }
1725         }
1726
1727         /* Program statistics memory */
1728         writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
1729
1730         if (nic->device_type == XFRAME_II_DEVICE) {
1731                 val64 = STAT_BC(0x320);
1732                 writeq(val64, &bar0->stat_byte_cnt);
1733         }
1734
1735         /*
1736          * Initializing the sampling rate for the device to calculate the
1737          * bandwidth utilization.
1738          */
1739         val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
1740             MAC_RX_LINK_UTIL_VAL(rmac_util_period);
1741         writeq(val64, &bar0->mac_link_util);
1742
1743         /*
1744          * Initializing the Transmit and Receive Traffic Interrupt
1745          * Scheme.
1746          */
1747
1748         /* Initialize TTI */
1749         if (SUCCESS != init_tti(nic, nic->last_link_state))
1750                 return -ENODEV;
1751
1752         /* RTI Initialization */
1753         if (nic->device_type == XFRAME_II_DEVICE) {
1754                 /*
1755                  * Programmed to generate Apprx 500 Intrs per
1756                  * second
1757                  */
1758                 int count = (nic->config.bus_speed * 125)/4;
1759                 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
1760         } else
1761                 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
1762         val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
1763                  RTI_DATA1_MEM_RX_URNG_B(0x10) |
1764                  RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
1765
1766         writeq(val64, &bar0->rti_data1_mem);
1767
1768         val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
1769                 RTI_DATA2_MEM_RX_UFC_B(0x2) ;
1770         if (nic->config.intr_type == MSI_X)
1771             val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
1772                         RTI_DATA2_MEM_RX_UFC_D(0x40));
1773         else
1774             val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
1775                         RTI_DATA2_MEM_RX_UFC_D(0x80));
1776         writeq(val64, &bar0->rti_data2_mem);
1777
1778         for (i = 0; i < config->rx_ring_num; i++) {
1779                 val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
1780                                 | RTI_CMD_MEM_OFFSET(i);
1781                 writeq(val64, &bar0->rti_command_mem);
1782
1783                 /*
1784                  * Once the operation completes, the Strobe bit of the
1785                  * command register will be reset. We poll for this
1786                  * particular condition. We wait for a maximum of 500ms
1787                  * for the operation to complete, if it's not complete
1788                  * by then we return error.
1789                  */
1790                 time = 0;
1791                 while (TRUE) {
1792                         val64 = readq(&bar0->rti_command_mem);
1793                         if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
1794                                 break;
1795
1796                         if (time > 10) {
1797                                 DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
1798                                           dev->name);
1799                                 return -ENODEV;
1800                         }
1801                         time++;
1802                         msleep(50);
1803                 }
1804         }
1805
1806         /*
1807          * Initializing proper values as Pause threshold into all
1808          * the 8 Queues on Rx side.
1809          */
1810         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
1811         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
1812
1813         /* Disable RMAC PAD STRIPPING */
1814         add = &bar0->mac_cfg;
1815         val64 = readq(&bar0->mac_cfg);
1816         val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
1817         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1818         writel((u32) (val64), add);
1819         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1820         writel((u32) (val64 >> 32), (add + 4));
1821         val64 = readq(&bar0->mac_cfg);
1822
1823         /* Enable FCS stripping by adapter */
1824         add = &bar0->mac_cfg;
1825         val64 = readq(&bar0->mac_cfg);
1826         val64 |= MAC_CFG_RMAC_STRIP_FCS;
1827         if (nic->device_type == XFRAME_II_DEVICE)
1828                 writeq(val64, &bar0->mac_cfg);
1829         else {
1830                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1831                 writel((u32) (val64), add);
1832                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1833                 writel((u32) (val64 >> 32), (add + 4));
1834         }
1835
1836         /*
1837          * Set the time value to be inserted in the pause frame
1838          * generated by xena.
1839          */
1840         val64 = readq(&bar0->rmac_pause_cfg);
1841         val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
1842         val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
1843         writeq(val64, &bar0->rmac_pause_cfg);
1844
1845         /*
1846          * Set the Threshold Limit for Generating the pause frame
1847          * If the amount of data in any Queue exceeds ratio of
1848          * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
1849          * pause frame is generated
1850          */
1851         val64 = 0;
1852         for (i = 0; i < 4; i++) {
1853                 val64 |=
1854                     (((u64) 0xFF00 | nic->mac_control.
1855                       mc_pause_threshold_q0q3)
1856                      << (i * 2 * 8));
1857         }
1858         writeq(val64, &bar0->mc_pause_thresh_q0q3);
1859
1860         val64 = 0;
1861         for (i = 0; i < 4; i++) {
1862                 val64 |=
1863                     (((u64) 0xFF00 | nic->mac_control.
1864                       mc_pause_threshold_q4q7)
1865                      << (i * 2 * 8));
1866         }
1867         writeq(val64, &bar0->mc_pause_thresh_q4q7);
1868
1869         /*
1870          * TxDMA will stop Read request if the number of read split has
1871          * exceeded the limit pointed by shared_splits
1872          */
1873         val64 = readq(&bar0->pic_control);
1874         val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
1875         writeq(val64, &bar0->pic_control);
1876
1877         if (nic->config.bus_speed == 266) {
1878                 writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout);
1879                 writeq(0x0, &bar0->read_retry_delay);
1880                 writeq(0x0, &bar0->write_retry_delay);
1881         }
1882
1883         /*
1884          * Programming the Herc to split every write transaction
1885          * that does not start on an ADB to reduce disconnects.
1886          */
1887         if (nic->device_type == XFRAME_II_DEVICE) {
1888                 val64 = FAULT_BEHAVIOUR | EXT_REQ_EN |
1889                         MISC_LINK_STABILITY_PRD(3);
1890                 writeq(val64, &bar0->misc_control);
1891                 val64 = readq(&bar0->pic_control2);
1892                 val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15));
1893                 writeq(val64, &bar0->pic_control2);
1894         }
1895         if (strstr(nic->product_name, "CX4")) {
1896                 val64 = TMAC_AVG_IPG(0x17);
1897                 writeq(val64, &bar0->tmac_avg_ipg);
1898         }
1899
1900         return SUCCESS;
1901 }
1902 #define LINK_UP_DOWN_INTERRUPT          1
1903 #define MAC_RMAC_ERR_TIMER              2
1904
1905 static int s2io_link_fault_indication(struct s2io_nic *nic)
1906 {
1907         if (nic->config.intr_type != INTA)
1908                 return MAC_RMAC_ERR_TIMER;
1909         if (nic->device_type == XFRAME_II_DEVICE)
1910                 return LINK_UP_DOWN_INTERRUPT;
1911         else
1912                 return MAC_RMAC_ERR_TIMER;
1913 }
1914
1915 /**
1916  *  do_s2io_write_bits -  update alarm bits in alarm register
1917  *  @value: alarm bits
1918  *  @flag: interrupt status
1919  *  @addr: address value
1920  *  Description: update alarm bits in alarm register
1921  *  Return Value:
1922  *  NONE.
1923  */
1924 static void do_s2io_write_bits(u64 value, int flag, void __iomem *addr)
1925 {
1926         u64 temp64;
1927
1928         temp64 = readq(addr);
1929
1930         if(flag == ENABLE_INTRS)
1931                 temp64 &= ~((u64) value);
1932         else
1933                 temp64 |= ((u64) value);
1934         writeq(temp64, addr);
1935 }
1936
1937 static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag)
1938 {
1939         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1940         register u64 gen_int_mask = 0;
1941
1942         if (mask & TX_DMA_INTR) {
1943
1944                 gen_int_mask |= TXDMA_INT_M;
1945
1946                 do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT |
1947                                 TXDMA_PCC_INT | TXDMA_TTI_INT |
1948                                 TXDMA_LSO_INT | TXDMA_TPA_INT |
1949                                 TXDMA_SM_INT, flag, &bar0->txdma_int_mask);
1950
1951                 do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
1952                                 PFC_MISC_0_ERR | PFC_MISC_1_ERR |
1953                                 PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag,
1954                                 &bar0->pfc_err_mask);
1955
1956                 do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
1957                                 TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR |
1958                                 TDA_PCIX_ERR, flag, &bar0->tda_err_mask);
1959
1960                 do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR |
1961                                 PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
1962                                 PCC_N_SERR | PCC_6_COF_OV_ERR |
1963                                 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
1964                                 PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR |
1965                                 PCC_TXB_ECC_SG_ERR, flag, &bar0->pcc_err_mask);
1966
1967                 do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR |
1968                                 TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask);
1969
1970                 do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT |
1971                                 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM |
1972                                 LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
1973                                 flag, &bar0->lso_err_mask);
1974
1975                 do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP,
1976                                 flag, &bar0->tpa_err_mask);
1977
1978                 do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask);
1979
1980         }
1981
1982         if (mask & TX_MAC_INTR) {
1983                 gen_int_mask |= TXMAC_INT_M;
1984                 do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag,
1985                                 &bar0->mac_int_mask);
1986                 do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR |
1987                                 TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
1988                                 TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
1989                                 flag, &bar0->mac_tmac_err_mask);
1990         }
1991
1992         if (mask & TX_XGXS_INTR) {
1993                 gen_int_mask |= TXXGXS_INT_M;
1994                 do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag,
1995                                 &bar0->xgxs_int_mask);
1996                 do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR |
1997                                 TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
1998                                 flag, &bar0->xgxs_txgxs_err_mask);
1999         }
2000
2001         if (mask & RX_DMA_INTR) {
2002                 gen_int_mask |= RXDMA_INT_M;
2003                 do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M |
2004                                 RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M,
2005                                 flag, &bar0->rxdma_int_mask);
2006                 do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR |
2007                                 RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM |
2008                                 RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR |
2009                                 RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask);
2010                 do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn |
2011                                 PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn |
2012                                 PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag,
2013                                 &bar0->prc_pcix_err_mask);
2014                 do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR |
2015                                 RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag,
2016                                 &bar0->rpa_err_mask);
2017                 do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR |
2018                                 RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM |
2019                                 RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR |
2020                                 RDA_FRM_ECC_SG_ERR | RDA_MISC_ERR|RDA_PCIX_ERR,
2021                                 flag, &bar0->rda_err_mask);
2022                 do_s2io_write_bits(RTI_SM_ERR_ALARM |
2023                                 RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
2024                                 flag, &bar0->rti_err_mask);
2025         }
2026
2027         if (mask & RX_MAC_INTR) {
2028                 gen_int_mask |= RXMAC_INT_M;
2029                 do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag,
2030                                 &bar0->mac_int_mask);
2031                 do_s2io_write_bits(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR |
2032                                 RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR |
2033                                 RMAC_DOUBLE_ECC_ERR |
2034                                 RMAC_LINK_STATE_CHANGE_INT,
2035                                 flag, &bar0->mac_rmac_err_mask);
2036         }
2037
2038         if (mask & RX_XGXS_INTR)
2039         {
2040                 gen_int_mask |= RXXGXS_INT_M;
2041                 do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag,
2042                                 &bar0->xgxs_int_mask);
2043                 do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag,
2044                                 &bar0->xgxs_rxgxs_err_mask);
2045         }
2046
2047         if (mask & MC_INTR) {
2048                 gen_int_mask |= MC_INT_M;
2049                 do_s2io_write_bits(MC_INT_MASK_MC_INT, flag, &bar0->mc_int_mask);
2050                 do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG |
2051                                 MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag,
2052                                 &bar0->mc_err_mask);
2053         }
2054         nic->general_int_mask = gen_int_mask;
2055
2056         /* Remove this line when alarm interrupts are enabled */
2057         nic->general_int_mask = 0;
2058 }
2059 /**
2060  *  en_dis_able_nic_intrs - Enable or Disable the interrupts
2061  *  @nic: device private variable,
2062  *  @mask: A mask indicating which Intr block must be modified and,
2063  *  @flag: A flag indicating whether to enable or disable the Intrs.
2064  *  Description: This function will either disable or enable the interrupts
2065  *  depending on the flag argument. The mask argument can be used to
2066  *  enable/disable any Intr block.
2067  *  Return Value: NONE.
2068  */
2069
2070 static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
2071 {
2072         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2073         register u64 temp64 = 0, intr_mask = 0;
2074
2075         intr_mask = nic->general_int_mask;
2076
2077         /*  Top level interrupt classification */
2078         /*  PIC Interrupts */
2079         if (mask & TX_PIC_INTR) {
2080                 /*  Enable PIC Intrs in the general intr mask register */
2081                 intr_mask |= TXPIC_INT_M;
2082                 if (flag == ENABLE_INTRS) {
2083                         /*
2084                          * If Hercules adapter enable GPIO otherwise
2085                          * disable all PCIX, Flash, MDIO, IIC and GPIO
2086                          * interrupts for now.
2087                          * TODO
2088                          */
2089                         if (s2io_link_fault_indication(nic) ==
2090                                         LINK_UP_DOWN_INTERRUPT ) {
2091                                 do_s2io_write_bits(PIC_INT_GPIO, flag,
2092                                                 &bar0->pic_int_mask);
2093                                 do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag,
2094                                                 &bar0->gpio_int_mask);
2095                         } else
2096                                 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2097                 } else if (flag == DISABLE_INTRS) {
2098                         /*
2099                          * Disable PIC Intrs in the general
2100                          * intr mask register
2101                          */
2102                         writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2103                 }
2104         }
2105
2106         /*  Tx traffic interrupts */
2107         if (mask & TX_TRAFFIC_INTR) {
2108                 intr_mask |= TXTRAFFIC_INT_M;
2109                 if (flag == ENABLE_INTRS) {
2110                         /*
2111                          * Enable all the Tx side interrupts
2112                          * writing 0 Enables all 64 TX interrupt levels
2113                          */
2114                         writeq(0x0, &bar0->tx_traffic_mask);
2115                 } else if (flag == DISABLE_INTRS) {
2116                         /*
2117                          * Disable Tx Traffic Intrs in the general intr mask
2118                          * register.
2119                          */
2120                         writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
2121                 }
2122         }
2123
2124         /*  Rx traffic interrupts */
2125         if (mask & RX_TRAFFIC_INTR) {
2126                 intr_mask |= RXTRAFFIC_INT_M;
2127                 if (flag == ENABLE_INTRS) {
2128                         /* writing 0 Enables all 8 RX interrupt levels */
2129                         writeq(0x0, &bar0->rx_traffic_mask);
2130                 } else if (flag == DISABLE_INTRS) {
2131                         /*
2132                          * Disable Rx Traffic Intrs in the general intr mask
2133                          * register.
2134                          */
2135                         writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
2136                 }
2137         }
2138
2139         temp64 = readq(&bar0->general_int_mask);
2140         if (flag == ENABLE_INTRS)
2141                 temp64 &= ~((u64) intr_mask);
2142         else
2143                 temp64 = DISABLE_ALL_INTRS;
2144         writeq(temp64, &bar0->general_int_mask);
2145
2146         nic->general_int_mask = readq(&bar0->general_int_mask);
2147 }
2148
2149 /**
2150  *  verify_pcc_quiescent- Checks for PCC quiescent state
2151  *  Return: 1 If PCC is quiescence
2152  *          0 If PCC is not quiescence
2153  */
2154 static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
2155 {
2156         int ret = 0, herc;
2157         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2158         u64 val64 = readq(&bar0->adapter_status);
2159
2160         herc = (sp->device_type == XFRAME_II_DEVICE);
2161
2162         if (flag == FALSE) {
2163                 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2164                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
2165                                 ret = 1;
2166                 } else {
2167                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2168                                 ret = 1;
2169                 }
2170         } else {
2171                 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2172                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
2173                              ADAPTER_STATUS_RMAC_PCC_IDLE))
2174                                 ret = 1;
2175                 } else {
2176                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
2177                              ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2178                                 ret = 1;
2179                 }
2180         }
2181
2182         return ret;
2183 }
2184 /**
2185  *  verify_xena_quiescence - Checks whether the H/W is ready
2186  *  Description: Returns whether the H/W is ready to go or not. Depending
2187  *  on whether adapter enable bit was written or not the comparison
2188  *  differs and the calling function passes the input argument flag to
2189  *  indicate this.
2190  *  Return: 1 If xena is quiescence
2191  *          0 If Xena is not quiescence
2192  */
2193
2194 static int verify_xena_quiescence(struct s2io_nic *sp)
2195 {
2196         int  mode;
2197         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2198         u64 val64 = readq(&bar0->adapter_status);
2199         mode = s2io_verify_pci_mode(sp);
2200
2201         if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
2202                 DBG_PRINT(ERR_DBG, "%s", "TDMA is not ready!");
2203                 return 0;
2204         }
2205         if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
2206         DBG_PRINT(ERR_DBG, "%s", "RDMA is not ready!");
2207                 return 0;
2208         }
2209         if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
2210                 DBG_PRINT(ERR_DBG, "%s", "PFC is not ready!");
2211                 return 0;
2212         }
2213         if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
2214                 DBG_PRINT(ERR_DBG, "%s", "TMAC BUF is not empty!");
2215                 return 0;
2216         }
2217         if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
2218                 DBG_PRINT(ERR_DBG, "%s", "PIC is not QUIESCENT!");
2219                 return 0;
2220         }
2221         if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
2222                 DBG_PRINT(ERR_DBG, "%s", "MC_DRAM is not ready!");
2223                 return 0;
2224         }
2225         if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
2226                 DBG_PRINT(ERR_DBG, "%s", "MC_QUEUES is not ready!");
2227                 return 0;
2228         }
2229         if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
2230                 DBG_PRINT(ERR_DBG, "%s", "M_PLL is not locked!");
2231                 return 0;
2232         }
2233
2234         /*
2235          * In PCI 33 mode, the P_PLL is not used, and therefore,
2236          * the the P_PLL_LOCK bit in the adapter_status register will
2237          * not be asserted.
2238          */
2239         if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
2240                 sp->device_type == XFRAME_II_DEVICE && mode !=
2241                 PCI_MODE_PCI_33) {
2242                 DBG_PRINT(ERR_DBG, "%s", "P_PLL is not locked!");
2243                 return 0;
2244         }
2245         if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
2246                         ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
2247                 DBG_PRINT(ERR_DBG, "%s", "RC_PRC is not QUIESCENT!");
2248                 return 0;
2249         }
2250         return 1;
2251 }
2252
2253 /**
2254  * fix_mac_address -  Fix for Mac addr problem on Alpha platforms
2255  * @sp: Pointer to device specifc structure
2256  * Description :
2257  * New procedure to clear mac address reading  problems on Alpha platforms
2258  *
2259  */
2260
2261 static void fix_mac_address(struct s2io_nic * sp)
2262 {
2263         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2264         u64 val64;
2265         int i = 0;
2266
2267         while (fix_mac[i] != END_SIGN) {
2268                 writeq(fix_mac[i++], &bar0->gpio_control);
2269                 udelay(10);
2270                 val64 = readq(&bar0->gpio_control);
2271         }
2272 }
2273
2274 /**
2275  *  start_nic - Turns the device on
2276  *  @nic : device private variable.
2277  *  Description:
2278  *  This function actually turns the device on. Before this  function is
2279  *  called,all Registers are configured from their reset states
2280  *  and shared memory is allocated but the NIC is still quiescent. On
2281  *  calling this function, the device interrupts are cleared and the NIC is
2282  *  literally switched on by writing into the adapter control register.
2283  *  Return Value:
2284  *  SUCCESS on success and -1 on failure.
2285  */
2286
2287 static int start_nic(struct s2io_nic *nic)
2288 {
2289         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2290         struct net_device *dev = nic->dev;
2291         register u64 val64 = 0;
2292         u16 subid, i;
2293         struct mac_info *mac_control;
2294         struct config_param *config;
2295
2296         mac_control = &nic->mac_control;
2297         config = &nic->config;
2298
2299         /*  PRC Initialization and configuration */
2300         for (i = 0; i < config->rx_ring_num; i++) {
2301                 writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
2302                        &bar0->prc_rxd0_n[i]);
2303
2304                 val64 = readq(&bar0->prc_ctrl_n[i]);
2305                 if (nic->rxd_mode == RXD_MODE_1)
2306                         val64 |= PRC_CTRL_RC_ENABLED;
2307                 else
2308                         val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
2309                 if (nic->device_type == XFRAME_II_DEVICE)
2310                         val64 |= PRC_CTRL_GROUP_READS;
2311                 val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
2312                 val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
2313                 writeq(val64, &bar0->prc_ctrl_n[i]);
2314         }
2315
2316         if (nic->rxd_mode == RXD_MODE_3B) {
2317                 /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
2318                 val64 = readq(&bar0->rx_pa_cfg);
2319                 val64 |= RX_PA_CFG_IGNORE_L2_ERR;
2320                 writeq(val64, &bar0->rx_pa_cfg);
2321         }
2322
2323         if (vlan_tag_strip == 0) {
2324                 val64 = readq(&bar0->rx_pa_cfg);
2325                 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
2326                 writeq(val64, &bar0->rx_pa_cfg);
2327                 vlan_strip_flag = 0;
2328         }
2329
2330         /*
2331          * Enabling MC-RLDRAM. After enabling the device, we timeout
2332          * for around 100ms, which is approximately the time required
2333          * for the device to be ready for operation.
2334          */
2335         val64 = readq(&bar0->mc_rldram_mrs);
2336         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
2337         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
2338         val64 = readq(&bar0->mc_rldram_mrs);
2339
2340         msleep(100);    /* Delay by around 100 ms. */
2341
2342         /* Enabling ECC Protection. */
2343         val64 = readq(&bar0->adapter_control);
2344         val64 &= ~ADAPTER_ECC_EN;
2345         writeq(val64, &bar0->adapter_control);
2346
2347         /*
2348          * Verify if the device is ready to be enabled, if so enable
2349          * it.
2350          */
2351         val64 = readq(&bar0->adapter_status);
2352         if (!verify_xena_quiescence(nic)) {
2353                 DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
2354                 DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
2355                           (unsigned long long) val64);
2356                 return FAILURE;
2357         }
2358
2359         /*
2360          * With some switches, link might be already up at this point.
2361          * Because of this weird behavior, when we enable laser,
2362          * we may not get link. We need to handle this. We cannot
2363          * figure out which switch is misbehaving. So we are forced to
2364          * make a global change.
2365          */
2366
2367         /* Enabling Laser. */
2368         val64 = readq(&bar0->adapter_control);
2369         val64 |= ADAPTER_EOI_TX_ON;
2370         writeq(val64, &bar0->adapter_control);
2371
2372         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
2373                 /*
2374                  * Dont see link state interrupts initally on some switches,
2375                  * so directly scheduling the link state task here.
2376                  */
2377                 schedule_work(&nic->set_link_task);
2378         }
2379         /* SXE-002: Initialize link and activity LED */
2380         subid = nic->pdev->subsystem_device;
2381         if (((subid & 0xFF) >= 0x07) &&
2382             (nic->device_type == XFRAME_I_DEVICE)) {
2383                 val64 = readq(&bar0->gpio_control);
2384                 val64 |= 0x0000800000000000ULL;
2385                 writeq(val64, &bar0->gpio_control);
2386                 val64 = 0x0411040400000000ULL;
2387                 writeq(val64, (void __iomem *)bar0 + 0x2700);
2388         }
2389
2390         return SUCCESS;
2391 }
2392 /**
2393  * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
2394  */
2395 static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, struct \
2396                                         TxD *txdlp, int get_off)
2397 {
2398         struct s2io_nic *nic = fifo_data->nic;
2399         struct sk_buff *skb;
2400         struct TxD *txds;
2401         u16 j, frg_cnt;
2402
2403         txds = txdlp;
2404         if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) {
2405                 pci_unmap_single(nic->pdev, (dma_addr_t)
2406                         txds->Buffer_Pointer, sizeof(u64),
2407                         PCI_DMA_TODEVICE);
2408                 txds++;
2409         }
2410
2411         skb = (struct sk_buff *) ((unsigned long)
2412                         txds->Host_Control);
2413         if (!skb) {
2414                 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
2415                 return NULL;
2416         }
2417         pci_unmap_single(nic->pdev, (dma_addr_t)
2418                          txds->Buffer_Pointer,
2419                          skb->len - skb->data_len,
2420                          PCI_DMA_TODEVICE);
2421         frg_cnt = skb_shinfo(skb)->nr_frags;
2422         if (frg_cnt) {
2423                 txds++;
2424                 for (j = 0; j < frg_cnt; j++, txds++) {
2425                         skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
2426                         if (!txds->Buffer_Pointer)
2427                                 break;
2428                         pci_unmap_page(nic->pdev, (dma_addr_t)
2429                                         txds->Buffer_Pointer,
2430                                        frag->size, PCI_DMA_TODEVICE);
2431                 }
2432         }
2433         memset(txdlp,0, (sizeof(struct TxD) * fifo_data->max_txds));
2434         return(skb);
2435 }
2436
2437 /**
2438  *  free_tx_buffers - Free all queued Tx buffers
2439  *  @nic : device private variable.
2440  *  Description:
2441  *  Free all queued Tx buffers.
2442  *  Return Value: void
2443 */
2444
2445 static void free_tx_buffers(struct s2io_nic *nic)
2446 {
2447         struct net_device *dev = nic->dev;
2448         struct sk_buff *skb;
2449         struct TxD *txdp;
2450         int i, j;
2451         struct mac_info *mac_control;
2452         struct config_param *config;
2453         int cnt = 0;
2454
2455         mac_control = &nic->mac_control;
2456         config = &nic->config;
2457
2458         for (i = 0; i < config->tx_fifo_num; i++) {
2459                 unsigned long flags;
2460                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags);
2461                 for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
2462                         txdp = (struct TxD *) \
2463                         mac_control->fifos[i].list_info[j].list_virt_addr;
2464                         skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
2465                         if (skb) {
2466                                 nic->mac_control.stats_info->sw_stat.mem_freed
2467                                         += skb->truesize;
2468                                 dev_kfree_skb(skb);
2469                                 cnt++;
2470                         }
2471                 }
2472                 DBG_PRINT(INTR_DBG,
2473                           "%s:forcibly freeing %d skbs on FIFO%d\n",
2474                           dev->name, cnt, i);
2475                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
2476                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
2477                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock, flags);
2478         }
2479 }
2480
2481 /**
2482  *   stop_nic -  To stop the nic
2483  *   @nic ; device private variable.
2484  *   Description:
2485  *   This function does exactly the opposite of what the start_nic()
2486  *   function does. This function is called to stop the device.
2487  *   Return Value:
2488  *   void.
2489  */
2490
2491 static void stop_nic(struct s2io_nic *nic)
2492 {
2493         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2494         register u64 val64 = 0;
2495         u16 interruptible;
2496         struct mac_info *mac_control;
2497         struct config_param *config;
2498
2499         mac_control = &nic->mac_control;
2500         config = &nic->config;
2501
2502         /*  Disable all interrupts */
2503         en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS);
2504         interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
2505         interruptible |= TX_PIC_INTR;
2506         en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
2507
2508         /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
2509         val64 = readq(&bar0->adapter_control);
2510         val64 &= ~(ADAPTER_CNTL_EN);
2511         writeq(val64, &bar0->adapter_control);
2512 }
2513
2514 /**
2515  *  fill_rx_buffers - Allocates the Rx side skbs
2516  *  @nic:  device private variable
2517  *  @ring_no: ring number
2518  *  Description:
2519  *  The function allocates Rx side skbs and puts the physical
2520  *  address of these buffers into the RxD buffer pointers, so that the NIC
2521  *  can DMA the received frame into these locations.
2522  *  The NIC supports 3 receive modes, viz
2523  *  1. single buffer,
2524  *  2. three buffer and
2525  *  3. Five buffer modes.
2526  *  Each mode defines how many fragments the received frame will be split
2527  *  up into by the NIC. The frame is split into L3 header, L4 Header,
2528  *  L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
2529  *  is split into 3 fragments. As of now only single buffer mode is
2530  *  supported.
2531  *   Return Value:
2532  *  SUCCESS on success or an appropriate -ve value on failure.
2533  */
2534
2535 static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
2536 {
2537         struct net_device *dev = nic->dev;
2538         struct sk_buff *skb;
2539         struct RxD_t *rxdp;
2540         int off, off1, size, block_no, block_no1;
2541         u32 alloc_tab = 0;
2542         u32 alloc_cnt;
2543         struct mac_info *mac_control;
2544         struct config_param *config;
2545         u64 tmp;
2546         struct buffAdd *ba;
2547         unsigned long flags;
2548         struct RxD_t *first_rxdp = NULL;
2549         u64 Buffer0_ptr = 0, Buffer1_ptr = 0;
2550         struct RxD1 *rxdp1;
2551         struct RxD3 *rxdp3;
2552         struct swStat *stats = &nic->mac_control.stats_info->sw_stat;
2553
2554         mac_control = &nic->mac_control;
2555         config = &nic->config;
2556         alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
2557             atomic_read(&nic->rx_bufs_left[ring_no]);
2558
2559         block_no1 = mac_control->rings[ring_no].rx_curr_get_info.block_index;
2560         off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
2561         while (alloc_tab < alloc_cnt) {
2562                 block_no = mac_control->rings[ring_no].rx_curr_put_info.
2563                     block_index;
2564                 off = mac_control->rings[ring_no].rx_curr_put_info.offset;
2565
2566                 rxdp = mac_control->rings[ring_no].
2567                                 rx_blocks[block_no].rxds[off].virt_addr;
2568
2569                 if ((block_no == block_no1) && (off == off1) &&
2570                                         (rxdp->Host_Control)) {
2571                         DBG_PRINT(INTR_DBG, "%s: Get and Put",
2572                                   dev->name);
2573                         DBG_PRINT(INTR_DBG, " info equated\n");
2574                         goto end;
2575                 }
2576                 if (off && (off == rxd_count[nic->rxd_mode])) {
2577                         mac_control->rings[ring_no].rx_curr_put_info.
2578                             block_index++;
2579                         if (mac_control->rings[ring_no].rx_curr_put_info.
2580                             block_index == mac_control->rings[ring_no].
2581                                         block_count)
2582                                 mac_control->rings[ring_no].rx_curr_put_info.
2583                                         block_index = 0;
2584                         block_no = mac_control->rings[ring_no].
2585                                         rx_curr_put_info.block_index;
2586                         if (off == rxd_count[nic->rxd_mode])
2587                                 off = 0;
2588                         mac_control->rings[ring_no].rx_curr_put_info.
2589                                 offset = off;
2590                         rxdp = mac_control->rings[ring_no].
2591                                 rx_blocks[block_no].block_virt_addr;
2592                         DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
2593                                   dev->name, rxdp);
2594                 }
2595                 if(!napi) {
2596                         spin_lock_irqsave(&nic->put_lock, flags);
2597                         mac_control->rings[ring_no].put_pos =
2598                         (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
2599                         spin_unlock_irqrestore(&nic->put_lock, flags);
2600                 } else {
2601                         mac_control->rings[ring_no].put_pos =
2602                         (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
2603                 }
2604                 if ((rxdp->Control_1 & RXD_OWN_XENA) &&
2605                         ((nic->rxd_mode == RXD_MODE_3B) &&
2606                                 (rxdp->Control_2 & s2BIT(0)))) {
2607                         mac_control->rings[ring_no].rx_curr_put_info.
2608                                         offset = off;
2609                         goto end;
2610                 }
2611                 /* calculate size of skb based on ring mode */
2612                 size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
2613                                 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
2614                 if (nic->rxd_mode == RXD_MODE_1)
2615                         size += NET_IP_ALIGN;
2616                 else
2617                         size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
2618
2619                 /* allocate skb */
2620                 skb = dev_alloc_skb(size);
2621                 if(!skb) {
2622                         DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
2623                         DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
2624                         if (first_rxdp) {
2625                                 wmb();
2626                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2627                         }
2628                         nic->mac_control.stats_info->sw_stat. \
2629                                 mem_alloc_fail_cnt++;
2630                         return -ENOMEM ;
2631                 }
2632                 nic->mac_control.stats_info->sw_stat.mem_allocated
2633                         += skb->truesize;
2634                 if (nic->rxd_mode == RXD_MODE_1) {
2635                         /* 1 buffer mode - normal operation mode */
2636                         rxdp1 = (struct RxD1*)rxdp;
2637                         memset(rxdp, 0, sizeof(struct RxD1));
2638                         skb_reserve(skb, NET_IP_ALIGN);
2639                         rxdp1->Buffer0_ptr = pci_map_single
2640                             (nic->pdev, skb->data, size - NET_IP_ALIGN,
2641                                 PCI_DMA_FROMDEVICE);
2642                         if( (rxdp1->Buffer0_ptr == 0) ||
2643                                 (rxdp1->Buffer0_ptr ==
2644                                 DMA_ERROR_CODE))
2645                                 goto pci_map_failed;
2646
2647                         rxdp->Control_2 =
2648                                 SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
2649
2650                 } else if (nic->rxd_mode == RXD_MODE_3B) {
2651                         /*
2652                          * 2 buffer mode -
2653                          * 2 buffer mode provides 128
2654                          * byte aligned receive buffers.
2655                          */
2656
2657                         rxdp3 = (struct RxD3*)rxdp;
2658                         /* save buffer pointers to avoid frequent dma mapping */
2659                         Buffer0_ptr = rxdp3->Buffer0_ptr;
2660                         Buffer1_ptr = rxdp3->Buffer1_ptr;
2661                         memset(rxdp, 0, sizeof(struct RxD3));
2662                         /* restore the buffer pointers for dma sync*/
2663                         rxdp3->Buffer0_ptr = Buffer0_ptr;
2664                         rxdp3->Buffer1_ptr = Buffer1_ptr;
2665
2666                         ba = &mac_control->rings[ring_no].ba[block_no][off];
2667                         skb_reserve(skb, BUF0_LEN);
2668                         tmp = (u64)(unsigned long) skb->data;
2669                         tmp += ALIGN_SIZE;
2670                         tmp &= ~ALIGN_SIZE;
2671                         skb->data = (void *) (unsigned long)tmp;
2672                         skb_reset_tail_pointer(skb);
2673
2674                         if (!(rxdp3->Buffer0_ptr))
2675                                 rxdp3->Buffer0_ptr =
2676                                    pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN,
2677                                            PCI_DMA_FROMDEVICE);
2678                         else
2679                                 pci_dma_sync_single_for_device(nic->pdev,
2680                                 (dma_addr_t) rxdp3->Buffer0_ptr,
2681                                     BUF0_LEN, PCI_DMA_FROMDEVICE);
2682                         if( (rxdp3->Buffer0_ptr == 0) ||
2683                                 (rxdp3->Buffer0_ptr == DMA_ERROR_CODE))
2684                                 goto pci_map_failed;
2685
2686                         rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
2687                         if (nic->rxd_mode == RXD_MODE_3B) {
2688                                 /* Two buffer mode */
2689
2690                                 /*
2691                                  * Buffer2 will have L3/L4 header plus
2692                                  * L4 payload
2693                                  */
2694                                 rxdp3->Buffer2_ptr = pci_map_single
2695                                 (nic->pdev, skb->data, dev->mtu + 4,
2696                                                 PCI_DMA_FROMDEVICE);
2697
2698                                 if( (rxdp3->Buffer2_ptr == 0) ||
2699                                         (rxdp3->Buffer2_ptr == DMA_ERROR_CODE))
2700                                         goto pci_map_failed;
2701
2702                                 rxdp3->Buffer1_ptr =
2703                                                 pci_map_single(nic->pdev,
2704                                                 ba->ba_1, BUF1_LEN,
2705                                                 PCI_DMA_FROMDEVICE);
2706                                 if( (rxdp3->Buffer1_ptr == 0) ||
2707                                         (rxdp3->Buffer1_ptr == DMA_ERROR_CODE)) {
2708                                         pci_unmap_single
2709                                                 (nic->pdev,
2710                                                 (dma_addr_t)rxdp3->Buffer2_ptr,
2711                                                 dev->mtu + 4,
2712                                                 PCI_DMA_FROMDEVICE);
2713                                         goto pci_map_failed;
2714                                 }
2715                                 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
2716                                 rxdp->Control_2 |= SET_BUFFER2_SIZE_3
2717                                                                 (dev->mtu + 4);
2718                         }
2719                         rxdp->Control_2 |= s2BIT(0);
2720                 }
2721                 rxdp->Host_Control = (unsigned long) (skb);
2722                 if (alloc_tab & ((1 << rxsync_frequency) - 1))
2723                         rxdp->Control_1 |= RXD_OWN_XENA;
2724                 off++;
2725                 if (off == (rxd_count[nic->rxd_mode] + 1))
2726                         off = 0;
2727                 mac_control->rings[ring_no].rx_curr_put_info.offset = off;
2728
2729                 rxdp->Control_2 |= SET_RXD_MARKER;
2730                 if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
2731                         if (first_rxdp) {
2732                                 wmb();
2733                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2734                         }
2735                         first_rxdp = rxdp;
2736                 }
2737                 atomic_inc(&nic->rx_bufs_left[ring_no]);
2738                 alloc_tab++;
2739         }
2740
2741       end:
2742         /* Transfer ownership of first descriptor to adapter just before
2743          * exiting. Before that, use memory barrier so that ownership
2744          * and other fields are seen by adapter correctly.
2745          */
2746         if (first_rxdp) {
2747                 wmb();
2748                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2749         }
2750
2751         return SUCCESS;
2752 pci_map_failed:
2753         stats->pci_map_fail_cnt++;
2754         stats->mem_freed += skb->truesize;
2755         dev_kfree_skb_irq(skb);
2756         return -ENOMEM;
2757 }
2758
2759 static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
2760 {
2761         struct net_device *dev = sp->dev;
2762         int j;
2763         struct sk_buff *skb;
2764         struct RxD_t *rxdp;
2765         struct mac_info *mac_control;
2766         struct buffAdd *ba;
2767         struct RxD1 *rxdp1;
2768         struct RxD3 *rxdp3;
2769
2770         mac_control = &sp->mac_control;
2771         for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
2772                 rxdp = mac_control->rings[ring_no].
2773                                 rx_blocks[blk].rxds[j].virt_addr;
2774                 skb = (struct sk_buff *)
2775                         ((unsigned long) rxdp->Host_Control);
2776                 if (!skb) {
2777                         continue;
2778                 }
2779                 if (sp->rxd_mode == RXD_MODE_1) {
2780                         rxdp1 = (struct RxD1*)rxdp;
2781                         pci_unmap_single(sp->pdev, (dma_addr_t)
2782                                 rxdp1->Buffer0_ptr,
2783                                 dev->mtu +
2784                                 HEADER_ETHERNET_II_802_3_SIZE
2785                                 + HEADER_802_2_SIZE +
2786                                 HEADER_SNAP_SIZE,
2787                                 PCI_DMA_FROMDEVICE);
2788                         memset(rxdp, 0, sizeof(struct RxD1));
2789                 } else if(sp->rxd_mode == RXD_MODE_3B) {
2790                         rxdp3 = (struct RxD3*)rxdp;
2791                         ba = &mac_control->rings[ring_no].
2792                                 ba[blk][j];
2793                         pci_unmap_single(sp->pdev, (dma_addr_t)
2794                                 rxdp3->Buffer0_ptr,
2795                                 BUF0_LEN,
2796                                 PCI_DMA_FROMDEVICE);
2797                         pci_unmap_single(sp->pdev, (dma_addr_t)
2798                                 rxdp3->Buffer1_ptr,
2799                                 BUF1_LEN,
2800                                 PCI_DMA_FROMDEVICE);
2801                         pci_unmap_single(sp->pdev, (dma_addr_t)
2802                                 rxdp3->Buffer2_ptr,
2803                                 dev->mtu + 4,
2804                                 PCI_DMA_FROMDEVICE);
2805                         memset(rxdp, 0, sizeof(struct RxD3));
2806                 }
2807                 sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
2808                 dev_kfree_skb(skb);
2809                 atomic_dec(&sp->rx_bufs_left[ring_no]);
2810         }
2811 }
2812
2813 /**
2814  *  free_rx_buffers - Frees all Rx buffers
2815  *  @sp: device private variable.
2816  *  Description:
2817  *  This function will free all Rx buffers allocated by host.
2818  *  Return Value:
2819  *  NONE.
2820  */
2821
2822 static void free_rx_buffers(struct s2io_nic *sp)
2823 {
2824         struct net_device *dev = sp->dev;
2825         int i, blk = 0, buf_cnt = 0;
2826         struct mac_info *mac_control;
2827         struct config_param *config;
2828
2829         mac_control = &sp->mac_control;
2830         config = &sp->config;
2831
2832         for (i = 0; i < config->rx_ring_num; i++) {
2833                 for (blk = 0; blk < rx_ring_sz[i]; blk++)
2834                         free_rxd_blk(sp,i,blk);
2835
2836                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
2837                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
2838                 mac_control->rings[i].rx_curr_put_info.offset = 0;
2839                 mac_control->rings[i].rx_curr_get_info.offset = 0;
2840                 atomic_set(&sp->rx_bufs_left[i], 0);
2841                 DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
2842                           dev->name, buf_cnt, i);
2843         }
2844 }
2845
2846 /**
2847  * s2io_poll - Rx interrupt handler for NAPI support
2848  * @napi : pointer to the napi structure.
2849  * @budget : The number of packets that were budgeted to be processed
2850  * during  one pass through the 'Poll" function.
2851  * Description:
2852  * Comes into picture only if NAPI support has been incorporated. It does
2853  * the same thing that rx_intr_handler does, but not in a interrupt context
2854  * also It will process only a given number of packets.
2855  * Return value:
2856  * 0 on success and 1 if there are No Rx packets to be processed.
2857  */
2858
2859 static int s2io_poll(struct napi_struct *napi, int budget)
2860 {
2861         struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
2862         struct net_device *dev = nic->dev;
2863         int pkt_cnt = 0, org_pkts_to_process;
2864         struct mac_info *mac_control;
2865         struct config_param *config;
2866         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2867         int i;
2868
2869         mac_control = &nic->mac_control;
2870         config = &nic->config;
2871
2872         nic->pkts_to_process = budget;
2873         org_pkts_to_process = nic->pkts_to_process;
2874
2875         writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
2876         readl(&bar0->rx_traffic_int);
2877
2878         for (i = 0; i < config->rx_ring_num; i++) {
2879                 rx_intr_handler(&mac_control->rings[i]);
2880                 pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
2881                 if (!nic->pkts_to_process) {
2882                         /* Quota for the current iteration has been met */
2883                         goto no_rx;
2884                 }
2885         }
2886
2887         netif_rx_complete(dev, napi);
2888
2889         for (i = 0; i < config->rx_ring_num; i++) {
2890                 if (fill_rx_buffers(nic, i) == -ENOMEM) {
2891                         DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
2892                         DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
2893                         break;
2894                 }
2895         }
2896         /* Re enable the Rx interrupts. */
2897         writeq(0x0, &bar0->rx_traffic_mask);
2898         readl(&bar0->rx_traffic_mask);
2899         return pkt_cnt;
2900
2901 no_rx:
2902         for (i = 0; i < config->rx_ring_num; i++) {
2903                 if (fill_rx_buffers(nic, i) == -ENOMEM) {
2904                         DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
2905                         DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
2906                         break;
2907                 }
2908         }
2909         return pkt_cnt;
2910 }
2911
2912 #ifdef CONFIG_NET_POLL_CONTROLLER
2913 /**
2914  * s2io_netpoll - netpoll event handler entry point
2915  * @dev : pointer to the device structure.
2916  * Description:
2917  *      This function will be called by upper layer to check for events on the
2918  * interface in situations where interrupts are disabled. It is used for
2919  * specific in-kernel networking tasks, such as remote consoles and kernel
2920  * debugging over the network (example netdump in RedHat).
2921  */
2922 static void s2io_netpoll(struct net_device *dev)
2923 {
2924         struct s2io_nic *nic = dev->priv;
2925         struct mac_info *mac_control;
2926         struct config_param *config;
2927         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2928         u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
2929         int i;
2930
2931         if (pci_channel_offline(nic->pdev))
2932                 return;
2933
2934         disable_irq(dev->irq);
2935
2936         mac_control = &nic->mac_control;
2937         config = &nic->config;
2938
2939         writeq(val64, &bar0->rx_traffic_int);
2940         writeq(val64, &bar0->tx_traffic_int);
2941
2942         /* we need to free up the transmitted skbufs or else netpoll will
2943          * run out of skbs and will fail and eventually netpoll application such
2944          * as netdump will fail.
2945          */
2946         for (i = 0; i < config->tx_fifo_num; i++)
2947                 tx_intr_handler(&mac_control->fifos[i]);
2948
2949         /* check for received packet and indicate up to network */
2950         for (i = 0; i < config->rx_ring_num; i++)
2951                 rx_intr_handler(&mac_control->rings[i]);
2952
2953         for (i = 0; i < config->rx_ring_num; i++) {
2954                 if (fill_rx_buffers(nic, i) == -ENOMEM) {
2955                         DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
2956                         DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
2957                         break;
2958                 }
2959         }
2960         enable_irq(dev->irq);
2961         return;
2962 }
2963 #endif
2964
2965 /**
2966  *  rx_intr_handler - Rx interrupt handler
2967  *  @nic: device private variable.
2968  *  Description:
2969  *  If the interrupt is because of a received frame or if the
2970  *  receive ring contains fresh as yet un-processed frames,this function is
2971  *  called. It picks out the RxD at which place the last Rx processing had
2972  *  stopped and sends the skb to the OSM's Rx handler and then increments
2973  *  the offset.
2974  *  Return Value:
2975  *  NONE.
2976  */
2977 static void rx_intr_handler(struct ring_info *ring_data)
2978 {
2979         struct s2io_nic *nic = ring_data->nic;
2980         struct net_device *dev = (struct net_device *) nic->dev;
2981         int get_block, put_block, put_offset;
2982         struct rx_curr_get_info get_info, put_info;
2983         struct RxD_t *rxdp;
2984         struct sk_buff *skb;
2985         int pkt_cnt = 0;
2986         int i;
2987         struct RxD1* rxdp1;
2988         struct RxD3* rxdp3;
2989
2990         spin_lock(&nic->rx_lock);
2991
2992         get_info = ring_data->rx_curr_get_info;
2993         get_block = get_info.block_index;
2994         memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
2995         put_block = put_info.block_index;
2996         rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
2997         if (!napi) {
2998                 spin_lock(&nic->put_lock);
2999                 put_offset = ring_data->put_pos;
3000                 spin_unlock(&nic->put_lock);
3001         } else
3002                 put_offset = ring_data->put_pos;
3003
3004         while (RXD_IS_UP2DT(rxdp)) {
3005                 /*
3006                  * If your are next to put index then it's
3007                  * FIFO full condition
3008                  */
3009                 if ((get_block == put_block) &&
3010                     (get_info.offset + 1) == put_info.offset) {
3011                         DBG_PRINT(INTR_DBG, "%s: Ring Full\n",dev->name);
3012                         break;
3013                 }
3014                 skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
3015                 if (skb == NULL) {
3016                         DBG_PRINT(ERR_DBG, "%s: The skb is ",
3017                                   dev->name);
3018                         DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
3019                         spin_unlock(&nic->rx_lock);
3020                         return;
3021                 }
3022                 if (nic->rxd_mode == RXD_MODE_1) {
3023                         rxdp1 = (struct RxD1*)rxdp;
3024                         pci_unmap_single(nic->pdev, (dma_addr_t)
3025                                 rxdp1->Buffer0_ptr,
3026                                 dev->mtu +
3027                                 HEADER_ETHERNET_II_802_3_SIZE +
3028                                 HEADER_802_2_SIZE +
3029                                 HEADER_SNAP_SIZE,
3030                                 PCI_DMA_FROMDEVICE);
3031                 } else if (nic->rxd_mode == RXD_MODE_3B) {
3032                         rxdp3 = (struct RxD3*)rxdp;
3033                         pci_dma_sync_single_for_cpu(nic->pdev, (dma_addr_t)
3034                                 rxdp3->Buffer0_ptr,
3035                                 BUF0_LEN, PCI_DMA_FROMDEVICE);
3036                         pci_unmap_single(nic->pdev, (dma_addr_t)
3037                                 rxdp3->Buffer2_ptr,
3038                                 dev->mtu + 4,
3039                                 PCI_DMA_FROMDEVICE);
3040                 }
3041                 prefetch(skb->data);
3042                 rx_osm_handler(ring_data, rxdp);
3043                 get_info.offset++;
3044                 ring_data->rx_curr_get_info.offset = get_info.offset;
3045                 rxdp = ring_data->rx_blocks[get_block].
3046                                 rxds[get_info.offset].virt_addr;
3047                 if (get_info.offset == rxd_count[nic->rxd_mode]) {
3048                         get_info.offset = 0;
3049                         ring_data->rx_curr_get_info.offset = get_info.offset;
3050                         get_block++;
3051                         if (get_block == ring_data->block_count)
3052                                 get_block = 0;
3053                         ring_data->rx_curr_get_info.block_index = get_block;
3054                         rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
3055                 }
3056
3057                 nic->pkts_to_process -= 1;
3058                 if ((napi) && (!nic->pkts_to_process))
3059                         break;
3060                 pkt_cnt++;
3061                 if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
3062                         break;
3063         }
3064         if (nic->lro) {
3065                 /* Clear all LRO sessions before exiting */
3066                 for (i=0; i<MAX_LRO_SESSIONS; i++) {
3067                         struct lro *lro = &nic->lro0_n[i];
3068                         if (lro->in_use) {
3069                                 update_L3L4_header(nic, lro);
3070                                 queue_rx_frame(lro->parent, lro->vlan_tag);
3071                                 clear_lro_session(lro);
3072                         }
3073                 }
3074         }
3075
3076         spin_unlock(&nic->rx_lock);
3077 }
3078
3079 /**
3080  *  tx_intr_handler - Transmit interrupt handler
3081  *  @nic : device private variable
3082  *  Description:
3083  *  If an interrupt was raised to indicate DMA complete of the
3084  *  Tx packet, this function is called. It identifies the last TxD
3085  *  whose buffer was freed and frees all skbs whose data have already
3086  *  DMA'ed into the NICs internal memory.
3087  *  Return Value:
3088  *  NONE
3089  */
3090
3091 static void tx_intr_handler(struct fifo_info *fifo_data)
3092 {
3093         struct s2io_nic *nic = fifo_data->nic;
3094         struct tx_curr_get_info get_info, put_info;
3095         struct sk_buff *skb = NULL;
3096         struct TxD *txdlp;
3097         int pkt_cnt = 0;
3098         unsigned long flags = 0;
3099         u8 err_mask;
3100
3101         if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags))
3102                         return;
3103
3104         get_info = fifo_data->tx_curr_get_info;
3105         memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
3106         txdlp = (struct TxD *) fifo_data->list_info[get_info.offset].
3107             list_virt_addr;
3108         while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
3109                (get_info.offset != put_info.offset) &&
3110                (txdlp->Host_Control)) {
3111                 /* Check for TxD errors */
3112                 if (txdlp->Control_1 & TXD_T_CODE) {
3113                         unsigned long long err;
3114                         err = txdlp->Control_1 & TXD_T_CODE;
3115                         if (err & 0x1) {
3116                                 nic->mac_control.stats_info->sw_stat.
3117                                                 parity_err_cnt++;
3118                         }
3119
3120                         /* update t_code statistics */
3121                         err_mask = err >> 48;
3122                         switch(err_mask) {
3123                                 case 2:
3124                                         nic->mac_control.stats_info->sw_stat.
3125                                                         tx_buf_abort_cnt++;
3126                                 break;
3127
3128                                 case 3:
3129                                         nic->mac_control.stats_info->sw_stat.
3130                                                         tx_desc_abort_cnt++;
3131                                 break;
3132
3133                                 case 7:
3134                                         nic->mac_control.stats_info->sw_stat.
3135                                                         tx_parity_err_cnt++;
3136                                 break;
3137
3138                                 case 10:
3139                                         nic->mac_control.stats_info->sw_stat.
3140                                                         tx_link_loss_cnt++;
3141                                 break;
3142
3143                                 case 15:
3144                                         nic->mac_control.stats_info->sw_stat.
3145                                                         tx_list_proc_err_cnt++;
3146                                 break;
3147                         }
3148                 }
3149
3150                 skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
3151                 if (skb == NULL) {
3152                         spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3153                         DBG_PRINT(ERR_DBG, "%s: Null skb ",
3154                         __FUNCTION__);
3155                         DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
3156                         return;
3157                 }
3158                 pkt_cnt++;
3159
3160                 /* Updating the statistics block */
3161                 nic->stats.tx_bytes += skb->len;
3162                 nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
3163                 dev_kfree_skb_irq(skb);
3164
3165                 get_info.offset++;
3166                 if (get_info.offset == get_info.fifo_len + 1)
3167                         get_info.offset = 0;
3168                 txdlp = (struct TxD *) fifo_data->list_info
3169                     [get_info.offset].list_virt_addr;
3170                 fifo_data->tx_curr_get_info.offset =
3171                     get_info.offset;
3172         }
3173
3174         s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq);
3175
3176         spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3177 }
3178
3179 /**
3180  *  s2io_mdio_write - Function to write in to MDIO registers
3181  *  @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3182  *  @addr     : address value
3183  *  @value    : data value
3184  *  @dev      : pointer to net_device structure
3185  *  Description:
3186  *  This function is used to write values to the MDIO registers
3187  *  NONE
3188  */
3189 static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, struct net_device *dev)
3190 {
3191         u64 val64 = 0x0;
3192         struct s2io_nic *sp = dev->priv;
3193         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3194
3195         //address transaction
3196         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3197                         | MDIO_MMD_DEV_ADDR(mmd_type)
3198                         | MDIO_MMS_PRT_ADDR(0x0);
3199         writeq(val64, &bar0->mdio_control);
3200         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3201         writeq(val64, &bar0->mdio_control);
3202         udelay(100);
3203
3204         //Data transaction
3205         val64 = 0x0;
3206         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3207                         | MDIO_MMD_DEV_ADDR(mmd_type)
3208                         | MDIO_MMS_PRT_ADDR(0x0)
3209                         | MDIO_MDIO_DATA(value)
3210                         | MDIO_OP(MDIO_OP_WRITE_TRANS);
3211         writeq(val64, &bar0->mdio_control);
3212         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3213         writeq(val64, &bar0->mdio_control);
3214         udelay(100);
3215
3216         val64 = 0x0;
3217         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3218         | MDIO_MMD_DEV_ADDR(mmd_type)
3219         | MDIO_MMS_PRT_ADDR(0x0)
3220         | MDIO_OP(MDIO_OP_READ_TRANS);
3221         writeq(val64, &bar0->mdio_control);
3222         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3223         writeq(val64, &bar0->mdio_control);
3224         udelay(100);
3225
3226 }
3227
3228 /**
3229  *  s2io_mdio_read - Function to write in to MDIO registers
3230  *  @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3231  *  @addr     : address value
3232  *  @dev      : pointer to net_device structure
3233  *  Description:
3234  *  This function is used to read values to the MDIO registers
3235  *  NONE
3236  */
3237 static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
3238 {
3239         u64 val64 = 0x0;
3240         u64 rval64 = 0x0;
3241         struct s2io_nic *sp = dev->priv;
3242         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3243
3244         /* address transaction */
3245         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3246                         | MDIO_MMD_DEV_ADDR(mmd_type)
3247                         | MDIO_MMS_PRT_ADDR(0x0);
3248         writeq(val64, &bar0->mdio_control);
3249         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3250         writeq(val64, &bar0->mdio_control);
3251         udelay(100);
3252
3253         /* Data transaction */
3254         val64 = 0x0;
3255         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3256                         | MDIO_MMD_DEV_ADDR(mmd_type)
3257                         | MDIO_MMS_PRT_ADDR(0x0)
3258                         | MDIO_OP(MDIO_OP_READ_TRANS);
3259         writeq(val64, &bar0->mdio_control);
3260         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3261         writeq(val64, &bar0->mdio_control);
3262         udelay(100);
3263
3264         /* Read the value from regs */
3265         rval64 = readq(&bar0->mdio_control);
3266         rval64 = rval64 & 0xFFFF0000;
3267         rval64 = rval64 >> 16;
3268         return rval64;
3269 }
3270 /**
3271  *  s2io_chk_xpak_counter - Function to check the status of the xpak counters
3272  *  @counter      : couter value to be updated
3273  *  @flag         : flag to indicate the status
3274  *  @type         : counter type
3275  *  Description:
3276  *  This function is to check the status of the xpak counters value
3277  *  NONE
3278  */
3279
3280 static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index, u16 flag, u16 type)
3281 {
3282         u64 mask = 0x3;
3283         u64 val64;
3284         int i;
3285         for(i = 0; i <index; i++)
3286                 mask = mask << 0x2;
3287
3288         if(flag > 0)
3289         {
3290                 *counter = *counter + 1;
3291                 val64 = *regs_stat & mask;
3292                 val64 = val64 >> (index * 0x2);
3293                 val64 = val64 + 1;
3294                 if(val64 == 3)
3295                 {
3296                         switch(type)
3297                         {
3298                         case 1:
3299                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3300                                           "service. Excessive temperatures may "
3301                                           "result in premature transceiver "
3302                                           "failure \n");
3303                         break;
3304                         case 2:
3305                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3306                                           "service Excessive bias currents may "
3307                                           "indicate imminent laser diode "
3308                                           "failure \n");
3309                         break;
3310                         case 3:
3311                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3312                                           "service Excessive laser output "
3313                                           "power may saturate far-end "
3314                                           "receiver\n");
3315                         break;
3316                         default:
3317                                 DBG_PRINT(ERR_DBG, "Incorrect XPAK Alarm "
3318                                           "type \n");
3319                         }
3320                         val64 = 0x0;
3321                 }
3322                 val64 = val64 << (index * 0x2);
3323                 *regs_stat = (*regs_stat & (~mask)) | (val64);
3324
3325         } else {
3326                 *regs_stat = *regs_stat & (~mask);
3327         }
3328 }
3329
3330 /**
3331  *  s2io_updt_xpak_counter - Function to update the xpak counters
3332  *  @dev         : pointer to net_device struct
3333  *  Description:
3334  *  This function is to upate the status of the xpak counters value
3335  *  NONE
3336  */
3337 static void s2io_updt_xpak_counter(struct net_device *dev)
3338 {
3339         u16 flag  = 0x0;
3340         u16 type  = 0x0;
3341         u16 val16 = 0x0;
3342         u64 val64 = 0x0;
3343         u64 addr  = 0x0;
3344
3345         struct s2io_nic *sp = dev->priv;
3346         struct stat_block *stat_info = sp->mac_control.stats_info;
3347
3348         /* Check the communication with the MDIO slave */
3349         addr = 0x0000;
3350         val64 = 0x0;
3351         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3352         if((val64 == 0xFFFF) || (val64 == 0x0000))
3353         {
3354                 DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
3355                           "Returned %llx\n", (unsigned long long)val64);
3356                 return;
3357         }
3358
3359         /* Check for the expecte value of 2040 at PMA address 0x0000 */
3360         if(val64 != 0x2040)
3361         {
3362                 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
3363                 DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n",
3364                           (unsigned long long)val64);
3365                 return;
3366         }
3367
3368         /* Loading the DOM register to MDIO register */
3369         addr = 0xA100;
3370         s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev);
3371         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3372
3373         /* Reading the Alarm flags */
3374         addr = 0xA070;
3375         val64 = 0x0;
3376         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3377
3378         flag = CHECKBIT(val64, 0x7);
3379         type = 1;
3380         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_transceiver_temp_high,
3381                                 &stat_info->xpak_stat.xpak_regs_stat,
3382                                 0x0, flag, type);
3383
3384         if(CHECKBIT(val64, 0x6))
3385                 stat_info->xpak_stat.alarm_transceiver_temp_low++;
3386
3387         flag = CHECKBIT(val64, 0x3);
3388         type = 2;
3389         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_bias_current_high,
3390                                 &stat_info->xpak_stat.xpak_regs_stat,
3391                                 0x2, flag, type);
3392
3393         if(CHECKBIT(val64, 0x2))
3394                 stat_info->xpak_stat.alarm_laser_bias_current_low++;
3395
3396         flag = CHECKBIT(val64, 0x1);
3397         type = 3;
3398         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_output_power_high,
3399                                 &stat_info->xpak_stat.xpak_regs_stat,
3400                                 0x4, flag, type);
3401
3402         if(CHECKBIT(val64, 0x0))
3403                 stat_info->xpak_stat.alarm_laser_output_power_low++;
3404
3405         /* Reading the Warning flags */
3406         addr = 0xA074;
3407         val64 = 0x0;
3408         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3409
3410         if(CHECKBIT(val64, 0x7))
3411                 stat_info->xpak_stat.warn_transceiver_temp_high++;
3412
3413         if(CHECKBIT(val64, 0x6))
3414                 stat_info->xpak_stat.warn_transceiver_temp_low++;
3415
3416         if(CHECKBIT(val64, 0x3))
3417                 stat_info->xpak_stat.warn_laser_bias_current_high++;
3418
3419         if(CHECKBIT(val64, 0x2))
3420                 stat_info->xpak_stat.warn_laser_bias_current_low++;
3421
3422         if(CHECKBIT(val64, 0x1))
3423                 stat_info->xpak_stat.warn_laser_output_power_high++;
3424
3425         if(CHECKBIT(val64, 0x0))
3426                 stat_info->xpak_stat.warn_laser_output_power_low++;
3427 }
3428
3429 /**
3430  *  wait_for_cmd_complete - waits for a command to complete.
3431  *  @sp : private member of the device structure, which is a pointer to the
3432  *  s2io_nic structure.
3433  *  Description: Function that waits for a command to Write into RMAC
3434  *  ADDR DATA registers to be completed and returns either success or
3435  *  error depending on whether the command was complete or not.
3436  *  Return value:
3437  *   SUCCESS on success and FAILURE on failure.
3438  */
3439
3440 static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
3441                                 int bit_state)
3442 {
3443         int ret = FAILURE, cnt = 0, delay = 1;
3444         u64 val64;
3445
3446         if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET))
3447                 return FAILURE;
3448
3449         do {
3450                 val64 = readq(addr);
3451                 if (bit_state == S2IO_BIT_RESET) {
3452                         if (!(val64 & busy_bit)) {
3453                                 ret = SUCCESS;
3454                                 break;
3455                         }
3456                 } else {
3457                         if (!(val64 & busy_bit)) {
3458                                 ret = SUCCESS;
3459                                 break;
3460                         }
3461                 }
3462
3463                 if(in_interrupt())
3464                         mdelay(delay);
3465                 else
3466                         msleep(delay);
3467
3468                 if (++cnt >= 10)
3469                         delay = 50;
3470         } while (cnt < 20);
3471         return ret;
3472 }
3473 /*
3474  * check_pci_device_id - Checks if the device id is supported
3475  * @id : device id
3476  * Description: Function to check if the pci device id is supported by driver.
3477  * Return value: Actual device id if supported else PCI_ANY_ID
3478  */
3479 static u16 check_pci_device_id(u16 id)
3480 {
3481         switch (id) {
3482         case PCI_DEVICE_ID_HERC_WIN:
3483         case PCI_DEVICE_ID_HERC_UNI:
3484                 return XFRAME_II_DEVICE;
3485         case PCI_DEVICE_ID_S2IO_UNI:
3486         case PCI_DEVICE_ID_S2IO_WIN:
3487                 return XFRAME_I_DEVICE;
3488         default:
3489                 return PCI_ANY_ID;
3490         }
3491 }
3492
3493 /**
3494  *  s2io_reset - Resets the card.
3495  *  @sp : private member of the device structure.
3496  *  Description: Function to Reset the card. This function then also
3497  *  restores the previously saved PCI configuration space registers as
3498  *  the card reset also resets the configuration space.
3499  *  Return value:
3500  *  void.
3501  */
3502
3503 static void s2io_reset(struct s2io_nic * sp)
3504 {
3505         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3506         u64 val64;
3507         u16 subid, pci_cmd;
3508         int i;
3509         u16 val16;
3510         unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
3511         unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
3512
3513         DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n",
3514                         __FUNCTION__, sp->dev->name);
3515
3516         /* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
3517         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
3518
3519         val64 = SW_RESET_ALL;
3520         writeq(val64, &bar0->sw_reset);
3521         if (strstr(sp->product_name, "CX4")) {
3522                 msleep(750);
3523         }
3524         msleep(250);
3525         for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
3526
3527                 /* Restore the PCI state saved during initialization. */
3528                 pci_restore_state(sp->pdev);
3529                 pci_read_config_word(sp->pdev, 0x2, &val16);
3530                 if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
3531                         break;
3532                 msleep(200);
3533         }
3534
3535         if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) {
3536                 DBG_PRINT(ERR_DBG,"%s SW_Reset failed!\n", __FUNCTION__);
3537         }
3538
3539         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
3540
3541         s2io_init_pci(sp);
3542
3543         /* Set swapper to enable I/O register access */
3544         s2io_set_swapper(sp);
3545
3546         /* restore mac_addr entries */
3547         do_s2io_restore_unicast_mc(sp);
3548
3549         /* Restore the MSIX table entries from local variables */
3550         restore_xmsi_data(sp);
3551
3552         /* Clear certain PCI/PCI-X fields after reset */
3553         if (sp->device_type == XFRAME_II_DEVICE) {
3554                 /* Clear "detected parity error" bit */
3555                 pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
3556
3557                 /* Clearing PCIX Ecc status register */
3558                 pci_write_config_dword(sp->pdev, 0x68, 0x7C);
3559
3560                 /* Clearing PCI_STATUS error reflected here */
3561                 writeq(s2BIT(62), &bar0->txpic_int_reg);
3562         }
3563
3564         /* Reset device statistics maintained by OS */
3565         memset(&sp->stats, 0, sizeof (struct net_device_stats));
3566
3567         up_cnt = sp->mac_control.stats_info->sw_stat.link_up_cnt;
3568         down_cnt = sp->mac_control.stats_info->sw_stat.link_down_cnt;
3569         up_time = sp->mac_control.stats_info->sw_stat.link_up_time;
3570         down_time = sp->mac_control.stats_info->sw_stat.link_down_time;
3571         reset_cnt = sp->mac_control.stats_info->sw_stat.soft_reset_cnt;
3572         mem_alloc_cnt = sp->mac_control.stats_info->sw_stat.mem_allocated;
3573         mem_free_cnt = sp->mac_control.stats_info->sw_stat.mem_freed;
3574         watchdog_cnt = sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt;
3575         /* save link up/down time/cnt, reset/memory/watchdog cnt */
3576         memset(sp->mac_control.stats_info, 0, sizeof(struct stat_block));
3577         /* restore link up/down time/cnt, reset/memory/watchdog cnt */
3578         sp->mac_control.stats_info->sw_stat.link_up_cnt = up_cnt;
3579         sp->mac_control.stats_info->sw_stat.link_down_cnt = down_cnt;
3580         sp->mac_control.stats_info->sw_stat.link_up_time = up_time;
3581         sp->mac_control.stats_info->sw_stat.link_down_time = down_time;
3582         sp->mac_control.stats_info->sw_stat.soft_reset_cnt = reset_cnt;
3583         sp->mac_control.stats_info->sw_stat.mem_allocated = mem_alloc_cnt;
3584         sp->mac_control.stats_info->sw_stat.mem_freed = mem_free_cnt;
3585         sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt = watchdog_cnt;
3586
3587         /* SXE-002: Configure link and activity LED to turn it off */
3588         subid = sp->pdev->subsystem_device;
3589         if (((subid & 0xFF) >= 0x07) &&
3590             (sp->device_type == XFRAME_I_DEVICE)) {
3591                 val64 = readq(&bar0->gpio_control);
3592                 val64 |= 0x0000800000000000ULL;
3593                 writeq(val64, &bar0->gpio_control);
3594                 val64 = 0x0411040400000000ULL;
3595                 writeq(val64, (void __iomem *)bar0 + 0x2700);
3596         }
3597
3598         /*
3599          * Clear spurious ECC interrupts that would have occured on
3600          * XFRAME II cards after reset.
3601          */
3602         if (sp->device_type == XFRAME_II_DEVICE) {
3603                 val64 = readq(&bar0->pcc_err_reg);
3604                 writeq(val64, &bar0->pcc_err_reg);
3605         }
3606
3607         sp->device_enabled_once = FALSE;
3608 }
3609
3610 /**
3611  *  s2io_set_swapper - to set the swapper controle on the card
3612  *  @sp : private member of the device structure,
3613  *  pointer to the s2io_nic structure.
3614  *  Description: Function to set the swapper control on the card
3615  *  correctly depending on the 'endianness' of the system.
3616  *  Return value:
3617  *  SUCCESS on success and FAILURE on failure.
3618  */
3619
3620 static int s2io_set_swapper(struct s2io_nic * sp)
3621 {
3622         struct net_device *dev = sp->dev;
3623         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3624         u64 val64, valt, valr;
3625
3626         /*
3627          * Set proper endian settings and verify the same by reading
3628          * the PIF Feed-back register.
3629          */
3630
3631         val64 = readq(&bar0->pif_rd_swapper_fb);
3632         if (val64 != 0x0123456789ABCDEFULL) {
3633                 int i = 0;
3634                 u64 value[] = { 0xC30000C3C30000C3ULL,   /* FE=1, SE=1 */
3635                                 0x8100008181000081ULL,  /* FE=1, SE=0 */
3636                                 0x4200004242000042ULL,  /* FE=0, SE=1 */
3637                                 0};                     /* FE=0, SE=0 */
3638
3639                 while(i<4) {
3640                         writeq(value[i], &bar0->swapper_ctrl);
3641                         val64 = readq(&bar0->pif_rd_swapper_fb);
3642                         if (val64 == 0x0123456789ABCDEFULL)
3643                                 break;
3644                         i++;
3645                 }
3646                 if (i == 4) {
3647                         DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3648                                 dev->name);
3649                         DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3650                                 (unsigned long long) val64);
3651                         return FAILURE;
3652                 }
3653                 valr = value[i];
3654         } else {
3655                 valr = readq(&bar0->swapper_ctrl);
3656         }
3657
3658         valt = 0x0123456789ABCDEFULL;
3659         writeq(valt, &bar0->xmsi_address);
3660         val64 = readq(&bar0->xmsi_address);
3661
3662         if(val64 != valt) {
3663                 int i = 0;
3664                 u64 value[] = { 0x00C3C30000C3C300ULL,  /* FE=1, SE=1 */
3665                                 0x0081810000818100ULL,  /* FE=1, SE=0 */
3666                                 0x0042420000424200ULL,  /* FE=0, SE=1 */
3667                                 0};                     /* FE=0, SE=0 */
3668
3669                 while(i<4) {
3670                         writeq((value[i] | valr), &bar0->swapper_ctrl);
3671                         writeq(valt, &bar0->xmsi_address);
3672                         val64 = readq(&bar0->xmsi_address);
3673                         if(val64 == valt)
3674                                 break;
3675                         i++;
3676                 }
3677                 if(i == 4) {
3678                         unsigned long long x = val64;
3679                         DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
3680                         DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
3681                         return FAILURE;
3682                 }
3683         }
3684         val64 = readq(&bar0->swapper_ctrl);
3685         val64 &= 0xFFFF000000000000ULL;
3686
3687 #ifdef  __BIG_ENDIAN
3688         /*
3689          * The device by default set to a big endian format, so a
3690          * big endian driver need not set anything.
3691          */
3692         val64 |= (SWAPPER_CTRL_TXP_FE |
3693                  SWAPPER_CTRL_TXP_SE |
3694                  SWAPPER_CTRL_TXD_R_FE |
3695                  SWAPPER_CTRL_TXD_W_FE |
3696                  SWAPPER_CTRL_TXF_R_FE |
3697                  SWAPPER_CTRL_RXD_R_FE |
3698                  SWAPPER_CTRL_RXD_W_FE |
3699                  SWAPPER_CTRL_RXF_W_FE |
3700                  SWAPPER_CTRL_XMSI_FE |
3701                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3702         if (sp->config.intr_type == INTA)
3703                 val64 |= SWAPPER_CTRL_XMSI_SE;
3704         writeq(val64, &bar0->swapper_ctrl);
3705 #else
3706         /*
3707          * Initially we enable all bits to make it accessible by the
3708          * driver, then we selectively enable only those bits that
3709          * we want to set.
3710          */
3711         val64 |= (SWAPPER_CTRL_TXP_FE |
3712                  SWAPPER_CTRL_TXP_SE |
3713                  SWAPPER_CTRL_TXD_R_FE |
3714                  SWAPPER_CTRL_TXD_R_SE |
3715                  SWAPPER_CTRL_TXD_W_FE |
3716                  SWAPPER_CTRL_TXD_W_SE |
3717                  SWAPPER_CTRL_TXF_R_FE |
3718                  SWAPPER_CTRL_RXD_R_FE |
3719                  SWAPPER_CTRL_RXD_R_SE |
3720                  SWAPPER_CTRL_RXD_W_FE |
3721                  SWAPPER_CTRL_RXD_W_SE |
3722                  SWAPPER_CTRL_RXF_W_FE |
3723                  SWAPPER_CTRL_XMSI_FE |
3724                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3725         if (sp->config.intr_type == INTA)
3726                 val64 |= SWAPPER_CTRL_XMSI_SE;
3727         writeq(val64, &bar0->swapper_ctrl);
3728 #endif
3729         val64 = readq(&bar0->swapper_ctrl);
3730
3731         /*
3732          * Verifying if endian settings are accurate by reading a
3733          * feedback register.
3734          */
3735         val64 = readq(&bar0->pif_rd_swapper_fb);
3736         if (val64 != 0x0123456789ABCDEFULL) {
3737                 /* Endian settings are incorrect, calls for another dekko. */
3738                 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3739                           dev->name);
3740                 DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3741                           (unsigned long long) val64);
3742                 return FAILURE;
3743         }
3744
3745         return SUCCESS;
3746 }
3747
3748 static int wait_for_msix_trans(struct s2io_nic *nic, int i)
3749 {
3750         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3751         u64 val64;
3752         int ret = 0, cnt = 0;
3753
3754         do {
3755                 val64 = readq(&bar0->xmsi_access);
3756                 if (!(val64 & s2BIT(15)))
3757                         break;
3758                 mdelay(1);
3759                 cnt++;
3760         } while(cnt < 5);
3761         if (cnt == 5) {
3762                 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
3763                 ret = 1;
3764         }
3765
3766         return ret;
3767 }
3768
3769 static void restore_xmsi_data(struct s2io_nic *nic)
3770 {
3771         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3772         u64 val64;
3773         int i;
3774
3775         for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3776                 writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
3777                 writeq(nic->msix_info[i].data, &bar0->xmsi_data);
3778                 val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6));
3779                 writeq(val64, &bar0->xmsi_access);
3780                 if (wait_for_msix_trans(nic, i)) {
3781                         DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3782                         continue;
3783                 }
3784         }
3785 }
3786
3787 static void store_xmsi_data(struct s2io_nic *nic)
3788 {
3789         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3790         u64 val64, addr, data;
3791         int i;
3792
3793         /* Store and display */
3794         for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3795                 val64 = (s2BIT(15) | vBIT(i, 26, 6));
3796                 writeq(val64, &bar0->xmsi_access);
3797                 if (wait_for_msix_trans(nic, i)) {
3798                         DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3799                         continue;
3800                 }
3801                 addr = readq(&bar0->xmsi_address);
3802                 data = readq(&bar0->xmsi_data);
3803                 if (addr && data) {
3804                         nic->msix_info[i].addr = addr;
3805                         nic->msix_info[i].data = data;
3806                 }
3807         }
3808 }
3809
3810 static int s2io_enable_msi_x(struct s2io_nic *nic)
3811 {
3812         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3813         u64 tx_mat, rx_mat;
3814         u16 msi_control; /* Temp variable */
3815         int ret, i, j, msix_indx = 1;
3816
3817         nic->entries = kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct msix_entry),
3818                                GFP_KERNEL);
3819         if (!nic->entries) {
3820                 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
3821                         __FUNCTION__);
3822                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
3823                 return -ENOMEM;
3824         }
3825         nic->mac_control.stats_info->sw_stat.mem_allocated
3826                 += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
3827
3828         nic->s2io_entries =
3829                 kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct s2io_msix_entry),
3830                                    GFP_KERNEL);
3831         if (!nic->s2io_entries) {
3832                 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3833                         __FUNCTION__);
3834                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
3835                 kfree(nic->entries);
3836                 nic->mac_control.stats_info->sw_stat.mem_freed
3837                         += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
3838                 return -ENOMEM;
3839         }
3840          nic->mac_control.stats_info->sw_stat.mem_allocated
3841                 += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
3842
3843         for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
3844                 nic->entries[i].entry = i;
3845                 nic->s2io_entries[i].entry = i;
3846                 nic->s2io_entries[i].arg = NULL;
3847                 nic->s2io_entries[i].in_use = 0;
3848         }
3849
3850         tx_mat = readq(&bar0->tx_mat0_n[0]);
3851         for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
3852                 tx_mat |= TX_MAT_SET(i, msix_indx);
3853                 nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
3854                 nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
3855                 nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
3856         }
3857         writeq(tx_mat, &bar0->tx_mat0_n[0]);
3858
3859         rx_mat = readq(&bar0->rx_mat);
3860         for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) {
3861                 rx_mat |= RX_MAT_SET(j, msix_indx);
3862                 nic->s2io_entries[msix_indx].arg
3863                         = &nic->mac_control.rings[j];
3864                 nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
3865                 nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
3866         }
3867         writeq(rx_mat, &bar0->rx_mat);
3868
3869         nic->avail_msix_vectors = 0;
3870         ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
3871         /* We fail init if error or we get less vectors than min required */
3872         if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) {
3873                 nic->avail_msix_vectors = ret;
3874                 ret = pci_enable_msix(nic->pdev, nic->entries, ret);
3875         }
3876         if (ret) {
3877                 DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
3878                 kfree(nic->entries);
3879                 nic->mac_control.stats_info->sw_stat.mem_freed
3880                         += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
3881                 kfree(nic->s2io_entries);
3882                 nic->mac_control.stats_info->sw_stat.mem_freed
3883                 += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
3884                 nic->entries = NULL;
3885                 nic->s2io_entries = NULL;
3886                 nic->avail_msix_vectors = 0;
3887                 return -ENOMEM;
3888         }
3889         if (!nic->avail_msix_vectors)
3890                 nic->avail_msix_vectors = MAX_REQUESTED_MSI_X;
3891
3892         /*
3893          * To enable MSI-X, MSI also needs to be enabled, due to a bug
3894          * in the herc NIC. (Temp change, needs to be removed later)
3895          */
3896         pci_read_config_word(nic->pdev, 0x42, &msi_control);
3897         msi_control |= 0x1; /* Enable MSI */
3898         pci_write_config_word(nic->pdev, 0x42, msi_control);
3899
3900         return 0;
3901 }
3902
3903 /* Handle software interrupt used during MSI(X) test */
3904 static irqreturn_t s2io_test_intr(int irq, void *dev_id)
3905 {
3906         struct s2io_nic *sp = dev_id;
3907
3908         sp->msi_detected = 1;
3909         wake_up(&sp->msi_wait);
3910
3911         return IRQ_HANDLED;
3912 }
3913
3914 /* Test interrupt path by forcing a a software IRQ */
3915 static int s2io_test_msi(struct s2io_nic *sp)
3916 {
3917         struct pci_dev *pdev = sp->pdev;
3918         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3919         int err;
3920         u64 val64, saved64;
3921
3922         err = request_irq(sp->entries[1].vector, s2io_test_intr, 0,
3923                         sp->name, sp);
3924         if (err) {
3925                 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
3926                        sp->dev->name, pci_name(pdev), pdev->irq);
3927                 return err;
3928         }
3929
3930         init_waitqueue_head (&sp->msi_wait);
3931         sp->msi_detected = 0;
3932
3933         saved64 = val64 = readq(&bar0->scheduled_int_ctrl);
3934         val64 |= SCHED_INT_CTRL_ONE_SHOT;
3935         val64 |= SCHED_INT_CTRL_TIMER_EN;
3936         val64 |= SCHED_INT_CTRL_INT2MSI(1);
3937         writeq(val64, &bar0->scheduled_int_ctrl);
3938
3939         wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10);
3940
3941         if (!sp->msi_detected) {
3942                 /* MSI(X) test failed, go back to INTx mode */
3943                 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
3944                         "using MSI(X) during test\n", sp->dev->name,
3945                         pci_name(pdev));
3946
3947                 err = -EOPNOTSUPP;
3948         }
3949
3950         free_irq(sp->entries[1].vector, sp);
3951
3952         writeq(saved64, &bar0->scheduled_int_ctrl);
3953
3954         return err;
3955 }
3956
3957 static void remove_msix_isr(struct s2io_nic *sp)
3958 {
3959         int i;
3960         u16 msi_control;
3961
3962         for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
3963                 if (sp->s2io_entries[i].in_use ==
3964                         MSIX_REGISTERED_SUCCESS) {
3965                         int vector = sp->entries[i].vector;
3966                         void *arg = sp->s2io_entries[i].arg;
3967                         free_irq(vector, arg);
3968                 }
3969         }
3970
3971         kfree(sp->entries);
3972         kfree(sp->s2io_entries);
3973         sp->entries = NULL;
3974         sp->s2io_entries = NULL;
3975
3976         pci_read_config_word(sp->pdev, 0x42, &msi_control);
3977         msi_control &= 0xFFFE; /* Disable MSI */
3978         pci_write_config_word(sp->pdev, 0x42, msi_control);
3979
3980         pci_disable_msix(sp->pdev);
3981 }
3982
3983 static void remove_inta_isr(struct s2io_nic *sp)
3984 {
3985         struct net_device *dev = sp->dev;
3986
3987         free_irq(sp->pdev->irq, dev);
3988 }
3989
3990 /* ********************************************************* *
3991  * Functions defined below concern the OS part of the driver *
3992  * ********************************************************* */
3993
3994 /**
3995  *  s2io_open - open entry point of the driver
3996  *  @dev : pointer to the device structure.
3997  *  Description:
3998  *  This function is the open entry point of the driver. It mainly calls a
3999  *  function to allocate Rx buffers and inserts them into the buffer
4000  *  descriptors and then enables the Rx part of the NIC.
4001  *  Return value:
4002  *  0 on success and an appropriate (-)ve integer as defined in errno.h
4003  *   file on failure.
4004  */
4005
4006 static int s2io_open(struct net_device *dev)
4007 {
4008         struct s2io_nic *sp = dev->priv;
4009         int err = 0;
4010
4011         /*
4012          * Make sure you have link off by default every time
4013          * Nic is initialized
4014          */
4015         netif_carrier_off(dev);
4016         sp->last_link_state = 0;
4017
4018         if (sp->config.intr_type == MSI_X) {
4019                 int ret = s2io_enable_msi_x(sp);
4020
4021                 if (!ret) {
4022                         ret = s2io_test_msi(sp);
4023                         /* rollback MSI-X, will re-enable during add_isr() */
4024                         remove_msix_isr(sp);
4025                 }
4026                 if (ret) {
4027
4028                         DBG_PRINT(ERR_DBG,
4029                           "%s: MSI-X requested but failed to enable\n",
4030                           dev->name);
4031                         sp->config.intr_type = INTA;
4032                 }
4033         }
4034
4035         /* NAPI doesn't work well with MSI(X) */
4036          if (sp->config.intr_type != INTA) {
4037                 if(sp->config.napi)
4038                         sp->config.napi = 0;
4039         }
4040
4041         /* Initialize H/W and enable interrupts */
4042         err = s2io_card_up(sp);
4043         if (err) {
4044                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
4045                           dev->name);
4046                 goto hw_init_failed;
4047         }
4048
4049         if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) {
4050                 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
4051                 s2io_card_down(sp);
4052                 err = -ENODEV;
4053                 goto hw_init_failed;
4054         }
4055         s2io_start_all_tx_queue(sp);
4056         return 0;
4057
4058 hw_init_failed:
4059         if (sp->config.intr_type == MSI_X) {
4060                 if (sp->entries) {
4061                         kfree(sp->entries);
4062                         sp->mac_control.stats_info->sw_stat.mem_freed
4063                         += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
4064                 }
4065                 if (sp->s2io_entries) {
4066                         kfree(sp->s2io_entries);
4067                         sp->mac_control.stats_info->sw_stat.mem_freed
4068                         += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
4069                 }
4070         }
4071         return err;
4072 }
4073
4074 /**
4075  *  s2io_close -close entry point of the driver
4076  *  @dev : device pointer.
4077  *  Description:
4078  *  This is the stop entry point of the driver. It needs to undo exactly
4079  *  whatever was done by the open entry point,thus it's usually referred to
4080  *  as the close function.Among other things this function mainly stops the
4081  *  Rx side of the NIC and frees all the Rx buffers in the Rx rings.
4082  *  Return value:
4083  *  0 on success and an appropriate (-)ve integer as defined in errno.h
4084  *  file on failure.
4085  */
4086
4087 static int s2io_close(struct net_device *dev)
4088 {
4089         struct s2io_nic *sp = dev->priv;
4090         struct config_param *config = &sp->config;
4091         u64 tmp64;
4092         int offset;
4093
4094         /* Return if the device is already closed               *
4095         *  Can happen when s2io_card_up failed in change_mtu    *
4096         */
4097         if (!is_s2io_card_up(sp))
4098                 return 0;
4099
4100         s2io_stop_all_tx_queue(sp);
4101         /* delete all populated mac entries */
4102         for (offset = 1; offset < config->max_mc_addr; offset++) {
4103                 tmp64 = do_s2io_read_unicast_mc(sp, offset);
4104                 if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
4105                         do_s2io_delete_unicast_mc(sp, tmp64);
4106         }
4107
4108         /* Reset card, kill tasklet and free Tx and Rx buffers. */
4109         s2io_card_down(sp);
4110
4111         return 0;
4112 }
4113
4114 /**
4115  *  s2io_xmit - Tx entry point of te driver
4116  *  @skb : the socket buffer containing the Tx data.
4117  *  @dev : device pointer.
4118  *  Description :
4119  *  This function is the Tx entry point of the driver. S2IO NIC supports
4120  *  certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
4121  *  NOTE: when device cant queue the pkt,just the trans_start variable will
4122  *  not be upadted.
4123  *  Return value:
4124  *  0 on success & 1 on failure.
4125  */
4126
4127 static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
4128 {
4129         struct s2io_nic *sp = dev->priv;
4130         u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
4131         register u64 val64;
4132         struct TxD *txdp;
4133         struct TxFIFO_element __iomem *tx_fifo;
4134         unsigned long flags = 0;
4135         u16 vlan_tag = 0;
4136         struct fifo_info *fifo = NULL;
4137         struct mac_info *mac_control;
4138         struct config_param *config;
4139         int do_spin_lock = 1;
4140         int offload_type;
4141         int enable_per_list_interrupt = 0;
4142         struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
4143
4144         mac_control = &sp->mac_control;
4145         config = &sp->config;
4146
4147         DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
4148
4149         if (unlikely(skb->len <= 0)) {
4150                 DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
4151                 dev_kfree_skb_any(skb);
4152                 return 0;
4153         }
4154
4155         if (!is_s2io_card_up(sp)) {
4156                 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
4157                           dev->name);
4158                 dev_kfree_skb(skb);
4159                 return 0;
4160         }
4161
4162         queue = 0;
4163         if (sp->vlgrp && vlan_tx_tag_present(skb))
4164                 vlan_tag = vlan_tx_tag_get(skb);
4165         if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) {
4166                 if (skb->protocol == htons(ETH_P_IP)) {
4167                         struct iphdr *ip;
4168                         struct tcphdr *th;
4169                         ip = ip_hdr(skb);
4170
4171                         if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
4172                                 th = (struct tcphdr *)(((unsigned char *)ip) +
4173                                                 ip->ihl*4);
4174
4175                                 if (ip->protocol == IPPROTO_TCP) {
4176                                         queue_len = sp->total_tcp_fifos;
4177                                         queue = (ntohs(th->source) +
4178                                                         ntohs(th->dest)) &
4179                                             sp->fifo_selector[queue_len - 1];
4180                                         if (queue >= queue_len)
4181                                                 queue = queue_len - 1;
4182                                 } else if (ip->protocol == IPPROTO_UDP) {
4183                                         queue_len = sp->total_udp_fifos;
4184                                         queue = (ntohs(th->source) +
4185                                                         ntohs(th->dest)) &
4186                                             sp->fifo_selector[queue_len - 1];
4187                                         if (queue >= queue_len)
4188                                                 queue = queue_len - 1;
4189                                         queue += sp->udp_fifo_idx;
4190                                         if (skb->len > 1024)
4191                                                 enable_per_list_interrupt = 1;
4192                                         do_spin_lock = 0;
4193                                 }
4194                         }
4195                 }
4196         } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
4197                 /* get fifo number based on skb->priority value */
4198                 queue = config->fifo_mapping
4199                                         [skb->priority & (MAX_TX_FIFOS - 1)];
4200         fifo = &mac_control->fifos[queue];
4201
4202         if (do_spin_lock)
4203                 spin_lock_irqsave(&fifo->tx_lock, flags);
4204         else {
4205                 if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
4206                         return NETDEV_TX_LOCKED;
4207         }
4208
4209 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
4210         if (sp->config.multiq) {
4211                 if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
4212                         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4213                         return NETDEV_TX_BUSY;
4214                 }
4215         } else
4216 #endif
4217         if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
4218                 if (netif_queue_stopped(dev)) {
4219                         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4220                         return NETDEV_TX_BUSY;
4221                 }
4222         }
4223
4224         put_off = (u16) fifo->tx_curr_put_info.offset;
4225         get_off = (u16) fifo->tx_curr_get_info.offset;
4226         txdp = (struct TxD *) fifo->list_info[put_off].list_virt_addr;
4227
4228         queue_len = fifo->tx_curr_put_info.fifo_len + 1;
4229         /* Avoid "put" pointer going beyond "get" pointer */
4230         if (txdp->Host_Control ||
4231                    ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4232                 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
4233                 s2io_stop_tx_queue(sp, fifo->fifo_no);
4234                 dev_kfree_skb(skb);
4235                 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4236                 return 0;
4237         }
4238
4239         offload_type = s2io_offload_type(skb);
4240         if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
4241                 txdp->Control_1 |= TXD_TCP_LSO_EN;
4242                 txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
4243         }
4244         if (skb->ip_summed == CHECKSUM_PARTIAL) {
4245                 txdp->Control_2 |=
4246                     (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
4247                      TXD_TX_CKO_UDP_EN);
4248         }
4249         txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
4250         txdp->Control_1 |= TXD_LIST_OWN_XENA;
4251         txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no);
4252         if (enable_per_list_interrupt)
4253                 if (put_off & (queue_len >> 5))
4254                         txdp->Control_2 |= TXD_INT_TYPE_PER_LIST;
4255         if (vlan_tag) {
4256                 txdp->Control_2 |= TXD_VLAN_ENABLE;
4257                 txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
4258         }
4259
4260         frg_len = skb->len - skb->data_len;
4261         if (offload_type == SKB_GSO_UDP) {
4262                 int ufo_size;
4263
4264                 ufo_size = s2io_udp_mss(skb);
4265                 ufo_size &= ~7;
4266                 txdp->Control_1 |= TXD_UFO_EN;
4267                 txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
4268                 txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
4269 #ifdef __BIG_ENDIAN
4270                 /* both variants do cpu_to_be64(be32_to_cpu(...)) */
4271                 fifo->ufo_in_band_v[put_off] =
4272                                 (__force u64)skb_shinfo(skb)->ip6_frag_id;
4273 #else
4274                 fifo->ufo_in_band_v[put_off] =
4275                                 (__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
4276 #endif
4277                 txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v;
4278                 txdp->Buffer_Pointer = pci_map_single(sp->pdev,
4279                                         fifo->ufo_in_band_v,
4280                                         sizeof(u64), PCI_DMA_TODEVICE);
4281                 if((txdp->Buffer_Pointer == 0) ||
4282                         (txdp->Buffer_Pointer == DMA_ERROR_CODE))
4283                         goto pci_map_failed;
4284                 txdp++;
4285         }
4286
4287         txdp->Buffer_Pointer = pci_map_single
4288             (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
4289         if((txdp->Buffer_Pointer == 0) ||
4290                 (txdp->Buffer_Pointer == DMA_ERROR_CODE))
4291                 goto pci_map_failed;
4292
4293         txdp->Host_Control = (unsigned long) skb;
4294         txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
4295         if (offload_type == SKB_GSO_UDP)
4296                 txdp->Control_1 |= TXD_UFO_EN;
4297
4298         frg_cnt = skb_shinfo(skb)->nr_frags;
4299         /* For fragmented SKB. */
4300         for (i = 0; i < frg_cnt; i++) {
4301                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
4302                 /* A '0' length fragment will be ignored */
4303                 if (!frag->size)
4304                         continue;
4305                 txdp++;
4306                 txdp->Buffer_Pointer = (u64) pci_map_page
4307                     (sp->pdev, frag->page, frag->page_offset,
4308                      frag->size, PCI_DMA_TODEVICE);
4309                 txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
4310                 if (offload_type == SKB_GSO_UDP)
4311                         txdp->Control_1 |= TXD_UFO_EN;
4312         }
4313         txdp->Control_1 |= TXD_GATHER_CODE_LAST;
4314
4315         if (offload_type == SKB_GSO_UDP)
4316                 frg_cnt++; /* as Txd0 was used for inband header */
4317
4318         tx_fifo = mac_control->tx_FIFO_start[queue];
4319         val64 = fifo->list_info[put_off].list_phy_addr;
4320         writeq(val64, &tx_fifo->TxDL_Pointer);
4321
4322         val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
4323                  TX_FIFO_LAST_LIST);
4324         if (offload_type)
4325                 val64 |= TX_FIFO_SPECIAL_FUNC;
4326
4327         writeq(val64, &tx_fifo->List_Control);
4328
4329         mmiowb();
4330
4331         put_off++;
4332         if (put_off == fifo->tx_curr_put_info.fifo_len + 1)
4333                 put_off = 0;
4334         fifo->tx_curr_put_info.offset = put_off;
4335
4336         /* Avoid "put" pointer going beyond "get" pointer */
4337         if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4338                 sp->mac_control.stats_info->sw_stat.fifo_full_cnt++;
4339                 DBG_PRINT(TX_DBG,
4340                           "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
4341                           put_off, get_off);
4342                 s2io_stop_tx_queue(sp, fifo->fifo_no);
4343         }
4344         mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
4345         dev->trans_start = jiffies;
4346         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4347
4348         if (sp->config.intr_type == MSI_X)
4349                 tx_intr_handler(fifo);
4350
4351         return 0;
4352 pci_map_failed:
4353         stats->pci_map_fail_cnt++;
4354         s2io_stop_tx_queue(sp, fifo->fifo_no);
4355         stats->mem_freed += skb->truesize;
4356         dev_kfree_skb(skb);
4357         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4358         return 0;
4359 }
4360
4361 static void
4362 s2io_alarm_handle(unsigned long data)
4363 {
4364         struct s2io_nic *sp = (struct s2io_nic *)data;
4365         struct net_device *dev = sp->dev;
4366
4367         s2io_handle_errors(dev);
4368         mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
4369 }
4370
4371 static int s2io_chk_rx_buffers(struct s2io_nic *sp, int rng_n)
4372 {
4373         int rxb_size, level;
4374
4375         if (!sp->lro) {
4376                 rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
4377                 level = rx_buffer_level(sp, rxb_size, rng_n);
4378
4379                 if ((level == PANIC) && (!TASKLET_IN_USE)) {
4380                         int ret;
4381                         DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
4382                         DBG_PRINT(INTR_DBG, "PANIC levels\n");
4383                         if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
4384                                 DBG_PRINT(INFO_DBG, "Out of memory in %s",
4385                                           __FUNCTION__);
4386                                 clear_bit(0, (&sp->tasklet_status));
4387                                 return -1;
4388                         }
4389                         clear_bit(0, (&sp->tasklet_status));
4390                 } else if (level == LOW)
4391                         tasklet_schedule(&sp->task);
4392
4393         } else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
4394                         DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
4395                         DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
4396         }
4397         return 0;
4398 }
4399
4400 static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
4401 {
4402         struct ring_info *ring = (struct ring_info *)dev_id;
4403         struct s2io_nic *sp = ring->nic;
4404
4405         if (!is_s2io_card_up(sp))
4406                 return IRQ_HANDLED;
4407
4408         rx_intr_handler(ring);
4409         s2io_chk_rx_buffers(sp, ring->ring_no);
4410
4411         return IRQ_HANDLED;
4412 }
4413
4414 static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
4415 {
4416         struct fifo_info *fifo = (struct fifo_info *)dev_id;
4417         struct s2io_nic *sp = fifo->nic;
4418
4419         if (!is_s2io_card_up(sp))
4420                 return IRQ_HANDLED;
4421
4422         tx_intr_handler(fifo);
4423         return IRQ_HANDLED;
4424 }
4425 static void s2io_txpic_intr_handle(struct s2io_nic *sp)
4426 {
4427         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4428         u64 val64;
4429
4430         val64 = readq(&bar0->pic_int_status);
4431         if (val64 & PIC_INT_GPIO) {
4432                 val64 = readq(&bar0->gpio_int_reg);
4433                 if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
4434                     (val64 & GPIO_INT_REG_LINK_UP)) {
4435                         /*
4436                          * This is unstable state so clear both up/down
4437                          * interrupt and adapter to re-evaluate the link state.
4438                          */
4439                         val64 |=  GPIO_INT_REG_LINK_DOWN;
4440                         val64 |= GPIO_INT_REG_LINK_UP;
4441                         writeq(val64, &bar0->gpio_int_reg);
4442                         val64 = readq(&bar0->gpio_int_mask);
4443                         val64 &= ~(GPIO_INT_MASK_LINK_UP |
4444                                    GPIO_INT_MASK_LINK_DOWN);
4445                         writeq(val64, &bar0->gpio_int_mask);
4446                 }
4447                 else if (val64 & GPIO_INT_REG_LINK_UP) {
4448                         val64 = readq(&bar0->adapter_status);
4449                                 /* Enable Adapter */
4450                         val64 = readq(&bar0->adapter_control);
4451                         val64 |= ADAPTER_CNTL_EN;
4452                         writeq(val64, &bar0->adapter_control);
4453                         val64 |= ADAPTER_LED_ON;
4454                         writeq(val64, &bar0->adapter_control);
4455                         if (!sp->device_enabled_once)
4456                                 sp->device_enabled_once = 1;
4457
4458                         s2io_link(sp, LINK_UP);
4459                         /*
4460                          * unmask link down interrupt and mask link-up
4461                          * intr
4462                          */
4463                         val64 = readq(&bar0->gpio_int_mask);
4464                         val64 &= ~GPIO_INT_MASK_LINK_DOWN;
4465                         val64 |= GPIO_INT_MASK_LINK_UP;
4466                         writeq(val64, &bar0->gpio_int_mask);
4467
4468                 }else if (val64 & GPIO_INT_REG_LINK_DOWN) {
4469                         val64 = readq(&bar0->adapter_status);
4470                         s2io_link(sp, LINK_DOWN);
4471                         /* Link is down so unmaks link up interrupt */
4472                         val64 = readq(&bar0->gpio_int_mask);
4473                         val64 &= ~GPIO_INT_MASK_LINK_UP;
4474                         val64 |= GPIO_INT_MASK_LINK_DOWN;
4475                         writeq(val64, &bar0->gpio_int_mask);
4476
4477                         /* turn off LED */
4478                         val64 = readq(&bar0->adapter_control);
4479                         val64 = val64 &(~ADAPTER_LED_ON);
4480                         writeq(val64, &bar0->adapter_control);
4481                 }
4482         }
4483         val64 = readq(&bar0->gpio_int_mask);
4484 }
4485
4486 /**
4487  *  do_s2io_chk_alarm_bit - Check for alarm and incrment the counter
4488  *  @value: alarm bits
4489  *  @addr: address value
4490  *  @cnt: counter variable
4491  *  Description: Check for alarm and increment the counter
4492  *  Return Value:
4493  *  1 - if alarm bit set
4494  *  0 - if alarm bit is not set
4495  */
4496 static int do_s2io_chk_alarm_bit(u64 value, void __iomem * addr,
4497                           unsigned long long *cnt)
4498 {
4499         u64 val64;
4500         val64 = readq(addr);
4501         if ( val64 & value ) {
4502                 writeq(val64, addr);
4503                 (*cnt)++;
4504                 return 1;
4505         }
4506         return 0;
4507
4508 }
4509
4510 /**
4511  *  s2io_handle_errors - Xframe error indication handler
4512  *  @nic: device private variable
4513  *  Description: Handle alarms such as loss of link, single or
4514  *  double ECC errors, critical and serious errors.
4515  *  Return Value:
4516  *  NONE
4517  */
4518 static void s2io_handle_errors(void * dev_id)
4519 {
4520         struct net_device *dev = (struct net_device *) dev_id;
4521         struct s2io_nic *sp = dev->priv;
4522         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4523         u64 temp64 = 0,val64=0;
4524         int i = 0;
4525
4526         struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat;
4527         struct xpakStat *stats = &sp->mac_control.stats_info->xpak_stat;
4528
4529         if (!is_s2io_card_up(sp))
4530                 return;
4531
4532         if (pci_channel_offline(sp->pdev))
4533                 return;
4534
4535         memset(&sw_stat->ring_full_cnt, 0,
4536                 sizeof(sw_stat->ring_full_cnt));
4537
4538         /* Handling the XPAK counters update */
4539         if(stats->xpak_timer_count < 72000) {
4540                 /* waiting for an hour */
4541                 stats->xpak_timer_count++;
4542         } else {
4543                 s2io_updt_xpak_counter(dev);
4544                 /* reset the count to zero */
4545                 stats->xpak_timer_count = 0;
4546         }
4547
4548         /* Handling link status change error Intr */
4549         if (s2io_link_fault_indication(sp) == MAC_RMAC_ERR_TIMER) {
4550                 val64 = readq(&bar0->mac_rmac_err_reg);
4551                 writeq(val64, &bar0->mac_rmac_err_reg);
4552                 if (val64 & RMAC_LINK_STATE_CHANGE_INT)
4553                         schedule_work(&sp->set_link_task);
4554         }
4555
4556         /* In case of a serious error, the device will be Reset. */
4557         if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source,
4558                                 &sw_stat->serious_err_cnt))
4559                 goto reset;
4560
4561         /* Check for data parity error */
4562         if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg,
4563                                 &sw_stat->parity_err_cnt))
4564                 goto reset;
4565
4566         /* Check for ring full counter */
4567         if (sp->device_type == XFRAME_II_DEVICE) {
4568                 val64 = readq(&bar0->ring_bump_counter1);
4569                 for (i=0; i<4; i++) {
4570                         temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
4571                         temp64 >>= 64 - ((i+1)*16);
4572                         sw_stat->ring_full_cnt[i] += temp64;
4573                 }
4574
4575                 val64 = readq(&bar0->ring_bump_counter2);
4576                 for (i=0; i<4; i++) {
4577                         temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
4578                         temp64 >>= 64 - ((i+1)*16);
4579                          sw_stat->ring_full_cnt[i+4] += temp64;
4580                 }
4581         }
4582
4583         val64 = readq(&bar0->txdma_int_status);
4584         /*check for pfc_err*/
4585         if (val64 & TXDMA_PFC_INT) {
4586                 if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM|
4587                                 PFC_MISC_0_ERR | PFC_MISC_1_ERR|
4588                                 PFC_PCIX_ERR, &bar0->pfc_err_reg,
4589                                 &sw_stat->pfc_err_cnt))
4590                         goto reset;
4591                 do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR, &bar0->pfc_err_reg,
4592                                 &sw_stat->pfc_err_cnt);
4593         }
4594
4595         /*check for tda_err*/
4596         if (val64 & TXDMA_TDA_INT) {
4597                 if(do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
4598                                 TDA_SM1_ERR_ALARM, &bar0->tda_err_reg,
4599                                 &sw_stat->tda_err_cnt))
4600                         goto reset;
4601                 do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR,
4602                                 &bar0->tda_err_reg, &sw_stat->tda_err_cnt);
4603         }
4604         /*check for pcc_err*/
4605         if (val64 & TXDMA_PCC_INT) {
4606                 if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM
4607                                 | PCC_N_SERR | PCC_6_COF_OV_ERR
4608                                 | PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR
4609                                 | PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR
4610                                 | PCC_TXB_ECC_DB_ERR, &bar0->pcc_err_reg,
4611                                 &sw_stat->pcc_err_cnt))
4612                         goto reset;
4613                 do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR,
4614                                 &bar0->pcc_err_reg, &sw_stat->pcc_err_cnt);
4615         }
4616
4617         /*check for tti_err*/
4618         if (val64 & TXDMA_TTI_INT) {
4619                 if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM, &bar0->tti_err_reg,
4620                                 &sw_stat->tti_err_cnt))
4621                         goto reset;
4622                 do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR,
4623                                 &bar0->tti_err_reg, &sw_stat->tti_err_cnt);
4624         }
4625
4626         /*check for lso_err*/
4627         if (val64 & TXDMA_LSO_INT) {
4628                 if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT
4629                                 | LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM,
4630                                 &bar0->lso_err_reg, &sw_stat->lso_err_cnt))
4631                         goto reset;
4632                 do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
4633                                 &bar0->lso_err_reg, &sw_stat->lso_err_cnt);
4634         }
4635
4636         /*check for tpa_err*/
4637         if (val64 & TXDMA_TPA_INT) {
4638                 if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM, &bar0->tpa_err_reg,
4639                         &sw_stat->tpa_err_cnt))
4640                         goto reset;
4641                 do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP, &bar0->tpa_err_reg,
4642                         &sw_stat->tpa_err_cnt);
4643         }
4644
4645         /*check for sm_err*/
4646         if (val64 & TXDMA_SM_INT) {
4647                 if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM, &bar0->sm_err_reg,
4648                         &sw_stat->sm_err_cnt))
4649                         goto reset;
4650         }
4651
4652         val64 = readq(&bar0->mac_int_status);
4653         if (val64 & MAC_INT_STATUS_TMAC_INT) {
4654                 if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR,
4655                                 &bar0->mac_tmac_err_reg,
4656                                 &sw_stat->mac_tmac_err_cnt))
4657                         goto reset;
4658                 do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR
4659                                 | TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
4660                                 &bar0->mac_tmac_err_reg,
4661                                 &sw_stat->mac_tmac_err_cnt);
4662         }
4663
4664         val64 = readq(&bar0->xgxs_int_status);
4665         if (val64 & XGXS_INT_STATUS_TXGXS) {
4666                 if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR,
4667                                 &bar0->xgxs_txgxs_err_reg,
4668                                 &sw_stat->xgxs_txgxs_err_cnt))
4669                         goto reset;
4670                 do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
4671                                 &bar0->xgxs_txgxs_err_reg,
4672                                 &sw_stat->xgxs_txgxs_err_cnt);
4673         }
4674
4675         val64 = readq(&bar0->rxdma_int_status);
4676         if (val64 & RXDMA_INT_RC_INT_M) {
4677                 if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR
4678                                 | RC_PRCn_SM_ERR_ALARM |RC_FTC_SM_ERR_ALARM,
4679                                 &bar0->rc_err_reg, &sw_stat->rc_err_cnt))
4680                         goto reset;
4681                 do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR
4682                                 | RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg,
4683                                 &sw_stat->rc_err_cnt);
4684                 if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn
4685                                 | PRC_PCI_AB_F_WR_Rn, &bar0->prc_pcix_err_reg,
4686                                 &sw_stat->prc_pcix_err_cnt))
4687                         goto reset;
4688                 do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn | PRC_PCI_DP_WR_Rn
4689                                 | PRC_PCI_DP_F_WR_Rn, &bar0->prc_pcix_err_reg,
4690                                 &sw_stat->prc_pcix_err_cnt);
4691         }
4692
4693         if (val64 & RXDMA_INT_RPA_INT_M) {
4694                 if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR,
4695                                 &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt))
4696                         goto reset;
4697                 do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR,
4698                                 &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt);
4699         }
4700
4701         if (val64 & RXDMA_INT_RDA_INT_M) {
4702                 if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR
4703                                 | RDA_FRM_ECC_DB_N_AERR | RDA_SM1_ERR_ALARM
4704                                 | RDA_SM0_ERR_ALARM | RDA_RXD_ECC_DB_SERR,
4705                                 &bar0->rda_err_reg, &sw_stat->rda_err_cnt))
4706                         goto reset;
4707                 do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR | RDA_FRM_ECC_SG_ERR
4708                                 | RDA_MISC_ERR | RDA_PCIX_ERR,
4709                                 &bar0->rda_err_reg, &sw_stat->rda_err_cnt);
4710         }
4711
4712         if (val64 & RXDMA_INT_RTI_INT_M) {
4713                 if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM, &bar0->rti_err_reg,
4714                                 &sw_stat->rti_err_cnt))
4715                         goto reset;
4716                 do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
4717                                 &bar0->rti_err_reg, &sw_stat->rti_err_cnt);
4718         }
4719
4720         val64 = readq(&bar0->mac_int_status);
4721         if (val64 & MAC_INT_STATUS_RMAC_INT) {
4722                 if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR,
4723                                 &bar0->mac_rmac_err_reg,
4724                                 &sw_stat->mac_rmac_err_cnt))
4725                         goto reset;
4726                 do_s2io_chk_alarm_bit(RMAC_UNUSED_INT|RMAC_SINGLE_ECC_ERR|
4727                                 RMAC_DOUBLE_ECC_ERR, &bar0->mac_rmac_err_reg,
4728                                 &sw_stat->mac_rmac_err_cnt);
4729         }
4730
4731         val64 = readq(&bar0->xgxs_int_status);
4732         if (val64 & XGXS_INT_STATUS_RXGXS) {
4733                 if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR,
4734                                 &bar0->xgxs_rxgxs_err_reg,
4735                                 &sw_stat->xgxs_rxgxs_err_cnt))
4736                         goto reset;
4737         }
4738
4739         val64 = readq(&bar0->mc_int_status);
4740         if(val64 & MC_INT_STATUS_MC_INT) {
4741                 if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR, &bar0->mc_err_reg,
4742                                 &sw_stat->mc_err_cnt))
4743                         goto reset;
4744
4745                 /* Handling Ecc errors */
4746                 if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
4747                         writeq(val64, &bar0->mc_err_reg);
4748                         if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
4749                                 sw_stat->double_ecc_errs++;
4750                                 if (sp->device_type != XFRAME_II_DEVICE) {
4751                                         /*
4752                                          * Reset XframeI only if critical error
4753                                          */
4754                                         if (val64 &
4755                                                 (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
4756                                                 MC_ERR_REG_MIRI_ECC_DB_ERR_1))
4757                                                                 goto reset;
4758                                         }
4759                         } else
4760                                 sw_stat->single_ecc_errs++;
4761                 }
4762         }
4763         return;
4764
4765 reset:
4766         s2io_stop_all_tx_queue(sp);
4767         schedule_work(&sp->rst_timer_task);
4768         sw_stat->soft_reset_cnt++;
4769         return;
4770 }
4771
4772 /**
4773  *  s2io_isr - ISR handler of the device .
4774  *  @irq: the irq of the device.
4775  *  @dev_id: a void pointer to the dev structure of the NIC.
4776  *  Description:  This function is the ISR handler of the device. It
4777  *  identifies the reason for the interrupt and calls the relevant
4778  *  service routines. As a contongency measure, this ISR allocates the
4779  *  recv buffers, if their numbers are below the panic value which is
4780  *  presently set to 25% of the original number of rcv buffers allocated.
4781  *  Return value:
4782  *   IRQ_HANDLED: will be returned if IRQ was handled by this routine
4783  *   IRQ_NONE: will be returned if interrupt is not from our device
4784  */
4785 static irqreturn_t s2io_isr(int irq, void *dev_id)
4786 {
4787         struct net_device *dev = (struct net_device *) dev_id;
4788         struct s2io_nic *sp = dev->priv;
4789         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4790         int i;
4791         u64 reason = 0;
4792         struct mac_info *mac_control;
4793         struct config_param *config;
4794
4795         /* Pretend we handled any irq's from a disconnected card */
4796         if (pci_channel_offline(sp->pdev))
4797                 return IRQ_NONE;
4798
4799         if (!is_s2io_card_up(sp))
4800                 return IRQ_NONE;
4801
4802         mac_control = &sp->mac_control;
4803         config = &sp->config;
4804
4805         /*
4806          * Identify the cause for interrupt and call the appropriate
4807          * interrupt handler. Causes for the interrupt could be;
4808          * 1. Rx of packet.
4809          * 2. Tx complete.
4810          * 3. Link down.
4811          */
4812         reason = readq(&bar0->general_int_status);
4813
4814         if (unlikely(reason == S2IO_MINUS_ONE) ) {
4815                 /* Nothing much can be done. Get out */
4816                 return IRQ_HANDLED;
4817         }
4818
4819         if (reason & (GEN_INTR_RXTRAFFIC |
4820                 GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC))
4821         {
4822                 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4823
4824                 if (config->napi) {
4825                         if (reason & GEN_INTR_RXTRAFFIC) {
4826                                 if (likely(netif_rx_schedule_prep(dev,
4827                                                         &sp->napi))) {
4828                                         __netif_rx_schedule(dev, &sp->napi);
4829                                         writeq(S2IO_MINUS_ONE,
4830                                                &bar0->rx_traffic_mask);
4831                                 } else
4832                                         writeq(S2IO_MINUS_ONE,
4833                                                &bar0->rx_traffic_int);
4834                         }
4835                 } else {
4836                         /*
4837                          * rx_traffic_int reg is an R1 register, writing all 1's
4838                          * will ensure that the actual interrupt causing bit
4839                          * get's cleared and hence a read can be avoided.
4840                          */
4841                         if (reason & GEN_INTR_RXTRAFFIC)
4842                                 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4843
4844                         for (i = 0; i < config->rx_ring_num; i++)
4845                                 rx_intr_handler(&mac_control->rings[i]);
4846                 }
4847
4848                 /*
4849                  * tx_traffic_int reg is an R1 register, writing all 1's
4850                  * will ensure that the actual interrupt causing bit get's
4851                  * cleared and hence a read can be avoided.
4852                  */
4853                 if (reason & GEN_INTR_TXTRAFFIC)
4854                         writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4855
4856                 for (i = 0; i < config->tx_fifo_num; i++)
4857                         tx_intr_handler(&mac_control->fifos[i]);
4858
4859                 if (reason & GEN_INTR_TXPIC)
4860                         s2io_txpic_intr_handle(sp);
4861
4862                 /*
4863                  * Reallocate the buffers from the interrupt handler itself.
4864                  */
4865                 if (!config->napi) {
4866                         for (i = 0; i < config->rx_ring_num; i++)
4867                                 s2io_chk_rx_buffers(sp, i);
4868                 }
4869                 writeq(sp->general_int_mask, &bar0->general_int_mask);
4870                 readl(&bar0->general_int_status);
4871
4872                 return IRQ_HANDLED;
4873
4874         }
4875         else if (!reason) {
4876                 /* The interrupt was not raised by us */
4877                 return IRQ_NONE;
4878         }
4879
4880         return IRQ_HANDLED;
4881 }
4882
4883 /**
4884  * s2io_updt_stats -
4885  */
4886 static void s2io_updt_stats(struct s2io_nic *sp)
4887 {
4888         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4889         u64 val64;
4890         int cnt = 0;
4891
4892         if (is_s2io_card_up(sp)) {
4893                 /* Apprx 30us on a 133 MHz bus */
4894                 val64 = SET_UPDT_CLICKS(10) |
4895                         STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
4896                 writeq(val64, &bar0->stat_cfg);
4897                 do {
4898                         udelay(100);
4899                         val64 = readq(&bar0->stat_cfg);
4900                         if (!(val64 & s2BIT(0)))
4901                                 break;
4902                         cnt++;
4903                         if (cnt == 5)
4904                                 break; /* Updt failed */
4905                 } while(1);
4906         }
4907 }
4908
4909 /**
4910  *  s2io_get_stats - Updates the device statistics structure.
4911  *  @dev : pointer to the device structure.
4912  *  Description:
4913  *  This function updates the device statistics structure in the s2io_nic
4914  *  structure and returns a pointer to the same.
4915  *  Return value:
4916  *  pointer to the updated net_device_stats structure.
4917  */
4918
4919 static struct net_device_stats *s2io_get_stats(struct net_device *dev)
4920 {
4921         struct s2io_nic *sp = dev->priv;
4922         struct mac_info *mac_control;
4923         struct config_param *config;
4924
4925
4926         mac_control = &sp->mac_control;
4927         config = &sp->config;
4928
4929         /* Configure Stats for immediate updt */
4930         s2io_updt_stats(sp);
4931
4932         sp->stats.tx_packets =
4933                 le32_to_cpu(mac_control->stats_info->tmac_frms);
4934         sp->stats.tx_errors =
4935                 le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
4936         sp->stats.rx_errors =
4937                 le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
4938         sp->stats.multicast =
4939                 le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
4940         sp->stats.rx_length_errors =
4941                 le64_to_cpu(mac_control->stats_info->rmac_long_frms);
4942
4943         return (&sp->stats);
4944 }
4945
4946 /**
4947  *  s2io_set_multicast - entry point for multicast address enable/disable.
4948  *  @dev : pointer to the device structure
4949  *  Description:
4950  *  This function is a driver entry point which gets called by the kernel
4951  *  whenever multicast addresses must be enabled/disabled. This also gets
4952  *  called to set/reset promiscuous mode. Depending on the deivce flag, we
4953  *  determine, if multicast address must be enabled or if promiscuous mode
4954  *  is to be disabled etc.
4955  *  Return value:
4956  *  void.
4957  */
4958
4959 static void s2io_set_multicast(struct net_device *dev)
4960 {
4961         int i, j, prev_cnt;
4962         struct dev_mc_list *mclist;
4963         struct s2io_nic *sp = dev->priv;
4964         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4965         u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
4966             0xfeffffffffffULL;
4967         u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
4968         void __iomem *add;
4969         struct config_param *config = &sp->config;
4970
4971         if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
4972                 /*  Enable all Multicast addresses */
4973                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
4974                        &bar0->rmac_addr_data0_mem);
4975                 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
4976                        &bar0->rmac_addr_data1_mem);
4977                 val64 = RMAC_ADDR_CMD_MEM_WE |
4978                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4979                     RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
4980                 writeq(val64, &bar0->rmac_addr_cmd_mem);
4981                 /* Wait till command completes */
4982                 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4983                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4984                                         S2IO_BIT_RESET);
4985
4986                 sp->m_cast_flg = 1;
4987                 sp->all_multi_pos = config->max_mc_addr - 1;
4988         } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
4989                 /*  Disable all Multicast addresses */
4990                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
4991                        &bar0->rmac_addr_data0_mem);
4992                 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
4993                        &bar0->rmac_addr_data1_mem);
4994                 val64 = RMAC_ADDR_CMD_MEM_WE |
4995                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4996                     RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
4997                 writeq(val64, &bar0->rmac_addr_cmd_mem);
4998                 /* Wait till command completes */
4999                 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5000                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5001                                         S2IO_BIT_RESET);
5002
5003                 sp->m_cast_flg = 0;
5004                 sp->all_multi_pos = 0;
5005         }
5006
5007         if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
5008                 /*  Put the NIC into promiscuous mode */
5009                 add = &bar0->mac_cfg;
5010                 val64 = readq(&bar0->mac_cfg);
5011                 val64 |= MAC_CFG_RMAC_PROM_ENABLE;
5012
5013                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5014                 writel((u32) val64, add);
5015                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5016                 writel((u32) (val64 >> 32), (add + 4));
5017
5018                 if (vlan_tag_strip != 1) {
5019                         val64 = readq(&bar0->rx_pa_cfg);
5020                         val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
5021                         writeq(val64, &bar0->rx_pa_cfg);
5022                         vlan_strip_flag = 0;
5023                 }
5024
5025                 val64 = readq(&bar0->mac_cfg);
5026                 sp->promisc_flg = 1;
5027                 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
5028                           dev->name);
5029         } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
5030                 /*  Remove the NIC from promiscuous mode */
5031                 add = &bar0->mac_cfg;
5032                 val64 = readq(&bar0->mac_cfg);
5033                 val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
5034
5035                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5036                 writel((u32) val64, add);
5037                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5038                 writel((u32) (val64 >> 32), (add + 4));
5039
5040                 if (vlan_tag_strip != 0) {
5041                         val64 = readq(&bar0->rx_pa_cfg);
5042                         val64 |= RX_PA_CFG_STRIP_VLAN_TAG;
5043                         writeq(val64, &bar0->rx_pa_cfg);
5044                         vlan_strip_flag = 1;
5045                 }
5046
5047                 val64 = readq(&bar0->mac_cfg);
5048                 sp->promisc_flg = 0;
5049                 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
5050                           dev->name);
5051         }
5052
5053         /*  Update individual M_CAST address list */
5054         if ((!sp->m_cast_flg) && dev->mc_count) {
5055                 if (dev->mc_count >
5056                     (config->max_mc_addr - config->max_mac_addr)) {
5057                         DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
5058                                   dev->name);
5059                         DBG_PRINT(ERR_DBG, "can be added, please enable ");
5060                         DBG_PRINT(ERR_DBG, "ALL_MULTI instead\n");
5061                         return;
5062                 }
5063
5064                 prev_cnt = sp->mc_addr_count;
5065                 sp->mc_addr_count = dev->mc_count;
5066
5067                 /* Clear out the previous list of Mc in the H/W. */
5068                 for (i = 0; i < prev_cnt; i++) {
5069                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
5070                                &bar0->rmac_addr_data0_mem);
5071                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5072                                 &bar0->rmac_addr_data1_mem);
5073                         val64 = RMAC_ADDR_CMD_MEM_WE |
5074                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5075                             RMAC_ADDR_CMD_MEM_OFFSET
5076                             (config->mc_start_offset + i);
5077                         writeq(val64, &bar0->rmac_addr_cmd_mem);
5078
5079                         /* Wait for command completes */
5080                         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5081                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5082                                         S2IO_BIT_RESET)) {
5083                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
5084                                           dev->name);
5085                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
5086                                 return;
5087                         }
5088                 }
5089
5090                 /* Create the new Rx filter list and update the same in H/W. */
5091                 for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
5092                      i++, mclist = mclist->next) {
5093                         memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
5094                                ETH_ALEN);
5095                         mac_addr = 0;
5096                         for (j = 0; j < ETH_ALEN; j++) {
5097                                 mac_addr |= mclist->dmi_addr[j];
5098                                 mac_addr <<= 8;
5099                         }
5100                         mac_addr >>= 8;
5101                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
5102                                &bar0->rmac_addr_data0_mem);
5103                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5104                                 &bar0->rmac_addr_data1_mem);
5105                         val64 = RMAC_ADDR_CMD_MEM_WE |
5106                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5107                             RMAC_ADDR_CMD_MEM_OFFSET
5108                             (i + config->mc_start_offset);
5109                         writeq(val64, &bar0->rmac_addr_cmd_mem);
5110
5111                         /* Wait for command completes */
5112                         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5113                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5114                                         S2IO_BIT_RESET)) {
5115                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
5116                                           dev->name);
5117                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
5118                                 return;
5119                         }
5120                 }
5121         }
5122 }
5123
5124 /* read from CAM unicast & multicast addresses and store it in
5125  * def_mac_addr structure
5126  */
5127 void do_s2io_store_unicast_mc(struct s2io_nic *sp)
5128 {
5129         int offset;
5130         u64 mac_addr = 0x0;
5131         struct config_param *config = &sp->config;
5132
5133         /* store unicast & multicast mac addresses */
5134         for (offset = 0; offset < config->max_mc_addr; offset++) {
5135                 mac_addr = do_s2io_read_unicast_mc(sp, offset);
5136                 /* if read fails disable the entry */
5137                 if (mac_addr == FAILURE)
5138                         mac_addr = S2IO_DISABLE_MAC_ENTRY;
5139                 do_s2io_copy_mac_addr(sp, offset, mac_addr);
5140         }
5141 }
5142
5143 /* restore unicast & multicast MAC to CAM from def_mac_addr structure */
5144 static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
5145 {
5146         int offset;
5147         struct config_param *config = &sp->config;
5148         /* restore unicast mac address */
5149         for (offset = 0; offset < config->max_mac_addr; offset++)
5150                 do_s2io_prog_unicast(sp->dev,
5151                         sp->def_mac_addr[offset].mac_addr);
5152
5153         /* restore multicast mac address */
5154         for (offset = config->mc_start_offset;
5155                 offset < config->max_mc_addr; offset++)
5156                 do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
5157 }
5158
5159 /* add a multicast MAC address to CAM */
5160 static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
5161 {
5162         int i;
5163         u64 mac_addr = 0;
5164         struct config_param *config = &sp->config;
5165
5166         for (i = 0; i < ETH_ALEN; i++) {
5167                 mac_addr <<= 8;
5168                 mac_addr |= addr[i];
5169         }
5170         if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
5171                 return SUCCESS;
5172
5173         /* check if the multicast mac already preset in CAM */
5174         for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
5175                 u64 tmp64;
5176                 tmp64 = do_s2io_read_unicast_mc(sp, i);
5177                 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5178                         break;
5179
5180                 if (tmp64 == mac_addr)
5181                         return SUCCESS;
5182         }
5183         if (i == config->max_mc_addr) {
5184                 DBG_PRINT(ERR_DBG,
5185                         "CAM full no space left for multicast MAC\n");
5186                 return FAILURE;
5187         }
5188         /* Update the internal structure with this new mac address */
5189         do_s2io_copy_mac_addr(sp, i, mac_addr);
5190
5191         return (do_s2io_add_mac(sp, mac_addr, i));
5192 }
5193
5194 /* add MAC address to CAM */
5195 static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
5196 {
5197         u64 val64;
5198         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5199
5200         writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr),
5201                 &bar0->rmac_addr_data0_mem);
5202
5203         val64 =
5204                 RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5205                 RMAC_ADDR_CMD_MEM_OFFSET(off);
5206         writeq(val64, &bar0->rmac_addr_cmd_mem);
5207
5208         /* Wait till command completes */
5209         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5210                 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5211                 S2IO_BIT_RESET)) {
5212                 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
5213                 return FAILURE;
5214         }
5215         return SUCCESS;
5216 }
5217 /* deletes a specified unicast/multicast mac entry from CAM */
5218 static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
5219 {
5220         int offset;
5221         u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
5222         struct config_param *config = &sp->config;
5223
5224         for (offset = 1;
5225                 offset < config->max_mc_addr; offset++) {
5226                 tmp64 = do_s2io_read_unicast_mc(sp, offset);
5227                 if (tmp64 == addr) {
5228                         /* disable the entry by writing  0xffffffffffffULL */
5229                         if (do_s2io_add_mac(sp, dis_addr, offset) ==  FAILURE)
5230                                 return FAILURE;
5231                         /* store the new mac list from CAM */
5232                         do_s2io_store_unicast_mc(sp);
5233                         return SUCCESS;
5234                 }
5235         }
5236         DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
5237                         (unsigned long long)addr);
5238         return FAILURE;
5239 }
5240
5241 /* read mac entries from CAM */
5242 static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
5243 {
5244         u64 tmp64 = 0xffffffffffff0000ULL, val64;
5245         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5246
5247         /* read mac addr */
5248         val64 =
5249                 RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5250                 RMAC_ADDR_CMD_MEM_OFFSET(offset);
5251         writeq(val64, &bar0->rmac_addr_cmd_mem);
5252
5253         /* Wait till command completes */
5254         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5255                 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5256                 S2IO_BIT_RESET)) {
5257                 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
5258                 return FAILURE;
5259         }
5260         tmp64 = readq(&bar0->rmac_addr_data0_mem);
5261         return (tmp64 >> 16);
5262 }
5263
5264 /**
5265  * s2io_set_mac_addr driver entry point
5266  */
5267
5268 static int s2io_set_mac_addr(struct net_device *dev, void *p)
5269 {
5270         struct sockaddr *addr = p;
5271
5272         if (!is_valid_ether_addr(addr->sa_data))
5273                 return -EINVAL;
5274
5275         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
5276
5277         /* store the MAC address in CAM */
5278         return (do_s2io_prog_unicast(dev, dev->dev_addr));
5279 }
5280 /**
5281  *  do_s2io_prog_unicast - Programs the Xframe mac address
5282  *  @dev : pointer to the device structure.
5283  *  @addr: a uchar pointer to the new mac address which is to be set.
5284  *  Description : This procedure will program the Xframe to receive
5285  *  frames with new Mac Address
5286  *  Return value: SUCCESS on success and an appropriate (-)ve integer
5287  *  as defined in errno.h file on failure.
5288  */
5289
5290 static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
5291 {
5292         struct s2io_nic *sp = dev->priv;
5293         register u64 mac_addr = 0, perm_addr = 0;
5294         int i;
5295         u64 tmp64;
5296         struct config_param *config = &sp->config;
5297
5298         /*
5299         * Set the new MAC address as the new unicast filter and reflect this
5300         * change on the device address registered with the OS. It will be
5301         * at offset 0.
5302         */
5303         for (i = 0; i < ETH_ALEN; i++) {
5304                 mac_addr <<= 8;
5305                 mac_addr |= addr[i];
5306                 perm_addr <<= 8;
5307                 perm_addr |= sp->def_mac_addr[0].mac_addr[i];
5308         }
5309
5310         /* check if the dev_addr is different than perm_addr */
5311         if (mac_addr == perm_addr)
5312                 return SUCCESS;
5313
5314         /* check if the mac already preset in CAM */
5315         for (i = 1; i < config->max_mac_addr; i++) {
5316                 tmp64 = do_s2io_read_unicast_mc(sp, i);
5317                 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5318                         break;
5319
5320                 if (tmp64 == mac_addr) {
5321                         DBG_PRINT(INFO_DBG,
5322                         "MAC addr:0x%llx already present in CAM\n",
5323                         (unsigned long long)mac_addr);
5324                         return SUCCESS;
5325                 }
5326         }
5327         if (i == config->max_mac_addr) {
5328                 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
5329                 return FAILURE;
5330         }
5331         /* Update the internal structure with this new mac address */
5332         do_s2io_copy_mac_addr(sp, i, mac_addr);
5333         return (do_s2io_add_mac(sp, mac_addr, i));
5334 }
5335
5336 /**
5337  * s2io_ethtool_sset - Sets different link parameters.
5338  * @sp : private member of the device structure, which is a pointer to the  * s2io_nic structure.
5339  * @info: pointer to the structure with parameters given by ethtool to set
5340  * link information.
5341  * Description:
5342  * The function sets different link parameters provided by the user onto
5343  * the NIC.
5344  * Return value:
5345  * 0 on success.
5346 */
5347
5348 static int s2io_ethtool_sset(struct net_device *dev,
5349                              struct ethtool_cmd *info)
5350 {
5351         struct s2io_nic *sp = dev->priv;
5352         if ((info->autoneg == AUTONEG_ENABLE) ||
5353             (info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
5354                 return -EINVAL;
5355         else {
5356                 s2io_close(sp->dev);
5357                 s2io_open(sp->dev);
5358         }
5359
5360         return 0;
5361 }
5362
5363 /**
5364  * s2io_ethtol_gset - Return link specific information.
5365  * @sp : private member of the device structure, pointer to the
5366  *      s2io_nic structure.
5367  * @info : pointer to the structure with parameters given by ethtool
5368  * to return link information.
5369  * Description:
5370  * Returns link specific information like speed, duplex etc.. to ethtool.
5371  * Return value :
5372  * return 0 on success.
5373  */
5374
5375 static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
5376 {
5377         struct s2io_nic *sp = dev->priv;
5378         info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5379         info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5380         info->port = PORT_FIBRE;
5381
5382         /* info->transceiver */
5383         info->transceiver = XCVR_EXTERNAL;
5384
5385         if (netif_carrier_ok(sp->dev)) {
5386                 info->speed = 10000;
5387                 info->duplex = DUPLEX_FULL;
5388         } else {
5389                 info->speed = -1;
5390                 info->duplex = -1;
5391         }
5392
5393         info->autoneg = AUTONEG_DISABLE;
5394         return 0;
5395 }
5396
5397 /**
5398  * s2io_ethtool_gdrvinfo - Returns driver specific information.
5399  * @sp : private member of the device structure, which is a pointer to the
5400  * s2io_nic structure.
5401  * @info : pointer to the structure with parameters given by ethtool to
5402  * return driver information.
5403  * Description:
5404  * Returns driver specefic information like name, version etc.. to ethtool.
5405  * Return value:
5406  *  void
5407  */
5408
5409 static void s2io_ethtool_gdrvinfo(struct net_device *dev,
5410                                   struct ethtool_drvinfo *info)
5411 {
5412         struct s2io_nic *sp = dev->priv;
5413
5414         strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
5415         strncpy(info->version, s2io_driver_version, sizeof(info->version));
5416         strncpy(info->fw_version, "", sizeof(info->fw_version));
5417         strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
5418         info->regdump_len = XENA_REG_SPACE;
5419         info->eedump_len = XENA_EEPROM_SPACE;
5420 }
5421
5422 /**
5423  *  s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
5424  *  @sp: private member of the device structure, which is a pointer to the
5425  *  s2io_nic structure.
5426  *  @regs : pointer to the structure with parameters given by ethtool for
5427  *  dumping the registers.
5428  *  @reg_space: The input argumnet into which all the registers are dumped.
5429  *  Description:
5430  *  Dumps the entire register space of xFrame NIC into the user given
5431  *  buffer area.
5432  * Return value :
5433  * void .
5434 */
5435
5436 static void s2io_ethtool_gregs(struct net_device *dev,
5437                                struct ethtool_regs *regs, void *space)
5438 {
5439         int i;
5440         u64 reg;
5441         u8 *reg_space = (u8 *) space;
5442         struct s2io_nic *sp = dev->priv;
5443
5444         regs->len = XENA_REG_SPACE;
5445         regs->version = sp->pdev->subsystem_device;
5446
5447         for (i = 0; i < regs->len; i += 8) {
5448                 reg = readq(sp->bar0 + i);
5449                 memcpy((reg_space + i), &reg, 8);
5450         }
5451 }
5452
5453 /**
5454  *  s2io_phy_id  - timer function that alternates adapter LED.
5455  *  @data : address of the private member of the device structure, which
5456  *  is a pointer to the s2io_nic structure, provided as an u32.
5457  * Description: This is actually the timer function that alternates the
5458  * adapter LED bit of the adapter control bit to set/reset every time on
5459  * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
5460  *  once every second.
5461 */
5462 static void s2io_phy_id(unsigned long data)
5463 {
5464         struct s2io_nic *sp = (struct s2io_nic *) data;
5465         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5466         u64 val64 = 0;
5467         u16 subid;
5468
5469         subid = sp->pdev->subsystem_device;
5470         if ((sp->device_type == XFRAME_II_DEVICE) ||
5471                    ((subid & 0xFF) >= 0x07)) {
5472                 val64 = readq(&bar0->gpio_control);
5473                 val64 ^= GPIO_CTRL_GPIO_0;
5474                 writeq(val64, &bar0->gpio_control);
5475         } else {
5476                 val64 = readq(&bar0->adapter_control);
5477                 val64 ^= ADAPTER_LED_ON;
5478                 writeq(val64, &bar0->adapter_control);
5479         }
5480
5481         mod_timer(&sp->id_timer, jiffies + HZ / 2);
5482 }
5483
5484 /**
5485  * s2io_ethtool_idnic - To physically identify the nic on the system.
5486  * @sp : private member of the device structure, which is a pointer to the
5487  * s2io_nic structure.
5488  * @id : pointer to the structure with identification parameters given by
5489  * ethtool.
5490  * Description: Used to physically identify the NIC on the system.
5491  * The Link LED will blink for a time specified by the user for
5492  * identification.
5493  * NOTE: The Link has to be Up to be able to blink the LED. Hence
5494  * identification is possible only if it's link is up.
5495  * Return value:
5496  * int , returns 0 on success
5497  */
5498
5499 static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
5500 {
5501         u64 val64 = 0, last_gpio_ctrl_val;
5502         struct s2io_nic *sp = dev->priv;
5503         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5504         u16 subid;
5505
5506         subid = sp->pdev->subsystem_device;
5507         last_gpio_ctrl_val = readq(&bar0->gpio_control);
5508         if ((sp->device_type == XFRAME_I_DEVICE) &&
5509                 ((subid & 0xFF) < 0x07)) {
5510                 val64 = readq(&bar0->adapter_control);
5511                 if (!(val64 & ADAPTER_CNTL_EN)) {
5512                         printk(KERN_ERR
5513                                "Adapter Link down, cannot blink LED\n");
5514                         return -EFAULT;
5515                 }
5516         }
5517         if (sp->id_timer.function == NULL) {
5518                 init_timer(&sp->id_timer);
5519                 sp->id_timer.function = s2io_phy_id;
5520                 sp->id_timer.data = (unsigned long) sp;
5521         }
5522         mod_timer(&sp->id_timer, jiffies);
5523         if (data)
5524                 msleep_interruptible(data * HZ);
5525         else
5526                 msleep_interruptible(MAX_FLICKER_TIME);
5527         del_timer_sync(&sp->id_timer);
5528
5529         if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
5530                 writeq(last_gpio_ctrl_val, &bar0->gpio_control);
5531                 last_gpio_ctrl_val = readq(&bar0->gpio_control);
5532         }
5533
5534         return 0;
5535 }
5536
5537 static void s2io_ethtool_gringparam(struct net_device *dev,
5538                                     struct ethtool_ringparam *ering)
5539 {
5540         struct s2io_nic *sp = dev->priv;
5541         int i,tx_desc_count=0,rx_desc_count=0;
5542
5543         if (sp->rxd_mode == RXD_MODE_1)
5544                 ering->rx_max_pending = MAX_RX_DESC_1;
5545         else if (sp->rxd_mode == RXD_MODE_3B)
5546                 ering->rx_max_pending = MAX_RX_DESC_2;
5547
5548         ering->tx_max_pending = MAX_TX_DESC;
5549         for (i = 0 ; i < sp->config.tx_fifo_num ; i++)
5550                 tx_desc_count += sp->config.tx_cfg[i].fifo_len;
5551
5552         DBG_PRINT(INFO_DBG,"\nmax txds : %d\n",sp->config.max_txds);
5553         ering->tx_pending = tx_desc_count;
5554         rx_desc_count = 0;
5555         for (i = 0 ; i < sp->config.rx_ring_num ; i++)
5556                 rx_desc_count += sp->config.rx_cfg[i].num_rxd;
5557
5558         ering->rx_pending = rx_desc_count;
5559
5560         ering->rx_mini_max_pending = 0;
5561         ering->rx_mini_pending = 0;
5562         if(sp->rxd_mode == RXD_MODE_1)
5563                 ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
5564         else if (sp->rxd_mode == RXD_MODE_3B)
5565                 ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
5566         ering->rx_jumbo_pending = rx_desc_count;
5567 }
5568
5569 /**
5570  * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
5571  * @sp : private member of the device structure, which is a pointer to the
5572  *      s2io_nic structure.
5573  * @ep : pointer to the structure with pause parameters given by ethtool.
5574  * Description:
5575  * Returns the Pause frame generation and reception capability of the NIC.
5576  * Return value:
5577  *  void
5578  */
5579 static void s2io_ethtool_getpause_data(struct net_device *dev,
5580                                        struct ethtool_pauseparam *ep)
5581 {
5582         u64 val64;
5583         struct s2io_nic *sp = dev->priv;
5584         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5585
5586         val64 = readq(&bar0->rmac_pause_cfg);
5587         if (val64 & RMAC_PAUSE_GEN_ENABLE)
5588                 ep->tx_pause = TRUE;
5589         if (val64 & RMAC_PAUSE_RX_ENABLE)
5590                 ep->rx_pause = TRUE;
5591         ep->autoneg = FALSE;
5592 }
5593
5594 /**
5595  * s2io_ethtool_setpause_data -  set/reset pause frame generation.
5596  * @sp : private member of the device structure, which is a pointer to the
5597  *      s2io_nic structure.
5598  * @ep : pointer to the structure with pause parameters given by ethtool.
5599  * Description:
5600  * It can be used to set or reset Pause frame generation or reception
5601  * support of the NIC.
5602  * Return value:
5603  * int, returns 0 on Success
5604  */
5605
5606 static int s2io_ethtool_setpause_data(struct net_device *dev,
5607                                struct ethtool_pauseparam *ep)
5608 {
5609         u64 val64;
5610         struct s2io_nic *sp = dev->priv;
5611         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5612
5613         val64 = readq(&bar0->rmac_pause_cfg);
5614         if (ep->tx_pause)
5615                 val64 |= RMAC_PAUSE_GEN_ENABLE;
5616         else
5617                 val64 &= ~RMAC_PAUSE_GEN_ENABLE;
5618         if (ep->rx_pause)
5619                 val64 |= RMAC_PAUSE_RX_ENABLE;
5620         else
5621                 val64 &= ~RMAC_PAUSE_RX_ENABLE;
5622         writeq(val64, &bar0->rmac_pause_cfg);
5623         return 0;
5624 }
5625
5626 /**
5627  * read_eeprom - reads 4 bytes of data from user given offset.
5628  * @sp : private member of the device structure, which is a pointer to the
5629  *      s2io_nic structure.
5630  * @off : offset at which the data must be written
5631  * @data : Its an output parameter where the data read at the given
5632  *      offset is stored.
5633  * Description:
5634  * Will read 4 bytes of data from the user given offset and return the
5635  * read data.
5636  * NOTE: Will allow to read only part of the EEPROM visible through the
5637  *   I2C bus.
5638  * Return value:
5639  *  -1 on failure and 0 on success.
5640  */
5641
5642 #define S2IO_DEV_ID             5
5643 static int read_eeprom(struct s2io_nic * sp, int off, u64 * data)
5644 {
5645         int ret = -1;
5646         u32 exit_cnt = 0;
5647         u64 val64;
5648         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5649
5650         if (sp->device_type == XFRAME_I_DEVICE) {
5651                 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
5652                     I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
5653                     I2C_CONTROL_CNTL_START;
5654                 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5655
5656                 while (exit_cnt < 5) {
5657                         val64 = readq(&bar0->i2c_control);
5658                         if (I2C_CONTROL_CNTL_END(val64)) {
5659                                 *data = I2C_CONTROL_GET_DATA(val64);
5660                                 ret = 0;
5661                                 break;
5662                         }
5663                         msleep(50);
5664                         exit_cnt++;
5665                 }
5666         }
5667
5668         if (sp->device_type == XFRAME_II_DEVICE) {
5669                 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5670                         SPI_CONTROL_BYTECNT(0x3) |
5671                         SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
5672                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5673                 val64 |= SPI_CONTROL_REQ;
5674                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5675                 while (exit_cnt < 5) {
5676                         val64 = readq(&bar0->spi_control);
5677                         if (val64 & SPI_CONTROL_NACK) {
5678                                 ret = 1;
5679                                 break;
5680                         } else if (val64 & SPI_CONTROL_DONE) {
5681                                 *data = readq(&bar0->spi_data);
5682                                 *data &= 0xffffff;
5683                                 ret = 0;
5684                                 break;
5685                         }
5686                         msleep(50);
5687                         exit_cnt++;
5688                 }
5689         }
5690         return ret;
5691 }
5692
5693 /**
5694  *  write_eeprom - actually writes the relevant part of the data value.
5695  *  @sp : private member of the device structure, which is a pointer to the
5696  *       s2io_nic structure.
5697  *  @off : offset at which the data must be written
5698  *  @data : The data that is to be written
5699  *  @cnt : Number of bytes of the data that are actually to be written into
5700  *  the Eeprom. (max of 3)
5701  * Description:
5702  *  Actually writes the relevant part of the data value into the Eeprom
5703  *  through the I2C bus.
5704  * Return value:
5705  *  0 on success, -1 on failure.
5706  */
5707
5708 static int write_eeprom(struct s2io_nic * sp, int off, u64 data, int cnt)
5709 {
5710         int exit_cnt = 0, ret = -1;
5711         u64 val64;
5712         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5713
5714         if (sp->device_type == XFRAME_I_DEVICE) {
5715                 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
5716                     I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) |
5717                     I2C_CONTROL_CNTL_START;
5718                 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5719
5720                 while (exit_cnt < 5) {
5721                         val64 = readq(&bar0->i2c_control);
5722                         if (I2C_CONTROL_CNTL_END(val64)) {
5723                                 if (!(val64 & I2C_CONTROL_NACK))
5724                                         ret = 0;
5725                                 break;
5726                         }
5727                         msleep(50);
5728                         exit_cnt++;
5729                 }
5730         }
5731
5732         if (sp->device_type == XFRAME_II_DEVICE) {
5733                 int write_cnt = (cnt == 8) ? 0 : cnt;
5734                 writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data);
5735
5736                 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5737                         SPI_CONTROL_BYTECNT(write_cnt) |
5738                         SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
5739                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5740                 val64 |= SPI_CONTROL_REQ;
5741                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5742                 while (exit_cnt < 5) {
5743                         val64 = readq(&bar0->spi_control);
5744                         if (val64 & SPI_CONTROL_NACK) {
5745                                 ret = 1;
5746                                 break;
5747                         } else if (val64 & SPI_CONTROL_DONE) {
5748                                 ret = 0;
5749                                 break;
5750                         }
5751                         msleep(50);
5752                         exit_cnt++;
5753                 }
5754         }
5755         return ret;
5756 }
5757 static void s2io_vpd_read(struct s2io_nic *nic)
5758 {
5759         u8 *vpd_data;
5760         u8 data;
5761         int i=0, cnt, fail = 0;
5762         int vpd_addr = 0x80;
5763
5764         if (nic->device_type == XFRAME_II_DEVICE) {
5765                 strcpy(nic->product_name, "Xframe II 10GbE network adapter");
5766                 vpd_addr = 0x80;
5767         }
5768         else {
5769                 strcpy(nic->product_name, "Xframe I 10GbE network adapter");
5770                 vpd_addr = 0x50;
5771         }
5772         strcpy(nic->serial_num, "NOT AVAILABLE");
5773
5774         vpd_data = kmalloc(256, GFP_KERNEL);
5775         if (!vpd_data) {
5776                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
5777                 return;
5778         }
5779         nic->mac_control.stats_info->sw_stat.mem_allocated += 256;
5780
5781         for (i = 0; i < 256; i +=4 ) {
5782                 pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
5783                 pci_read_config_byte(nic->pdev,  (vpd_addr + 2), &data);
5784                 pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
5785                 for (cnt = 0; cnt <5; cnt++) {
5786                         msleep(2);
5787                         pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
5788                         if (data == 0x80)
5789                                 break;
5790                 }
5791                 if (cnt >= 5) {
5792                         DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
5793                         fail = 1;
5794                         break;
5795                 }
5796                 pci_read_config_dword(nic->pdev,  (vpd_addr + 4),
5797                                       (u32 *)&vpd_data[i]);
5798         }
5799
5800         if(!fail) {
5801                 /* read serial number of adapter */
5802                 for (cnt = 0; cnt < 256; cnt++) {
5803                 if ((vpd_data[cnt] == 'S') &&
5804                         (vpd_data[cnt+1] == 'N') &&
5805                         (vpd_data[cnt+2] < VPD_STRING_LEN)) {
5806                                 memset(nic->serial_num, 0, VPD_STRING_LEN);
5807                                 memcpy(nic->serial_num, &vpd_data[cnt + 3],
5808                                         vpd_data[cnt+2]);
5809                                 break;
5810                         }
5811                 }
5812         }
5813
5814         if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) {
5815                 memset(nic->product_name, 0, vpd_data[1]);
5816                 memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
5817         }
5818         kfree(vpd_data);
5819         nic->mac_control.stats_info->sw_stat.mem_freed += 256;
5820 }
5821
5822 /**
5823  *  s2io_ethtool_geeprom  - reads the value stored in the Eeprom.
5824  *  @sp : private member of the device structure, which is a pointer to the *       s2io_nic structure.
5825  *  @eeprom : pointer to the user level structure provided by ethtool,
5826  *  containing all relevant information.
5827  *  @data_buf : user defined value to be written into Eeprom.
5828  *  Description: Reads the values stored in the Eeprom at given offset
5829  *  for a given length. Stores these values int the input argument data
5830  *  buffer 'data_buf' and returns these to the caller (ethtool.)
5831  *  Return value:
5832  *  int  0 on success
5833  */
5834
5835 static int s2io_ethtool_geeprom(struct net_device *dev,
5836                          struct ethtool_eeprom *eeprom, u8 * data_buf)
5837 {
5838         u32 i, valid;
5839         u64 data;
5840         struct s2io_nic *sp = dev->priv;
5841
5842         eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
5843
5844         if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
5845                 eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
5846
5847         for (i = 0; i < eeprom->len; i += 4) {
5848                 if (read_eeprom(sp, (eeprom->offset + i), &data)) {
5849                         DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
5850                         return -EFAULT;
5851                 }
5852                 valid = INV(data);
5853                 memcpy((data_buf + i), &valid, 4);
5854         }
5855         return 0;
5856 }
5857
5858 /**
5859  *  s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
5860  *  @sp : private member of the device structure, which is a pointer to the
5861  *  s2io_nic structure.
5862  *  @eeprom : pointer to the user level structure provided by ethtool,
5863  *  containing all relevant information.
5864  *  @data_buf ; user defined value to be written into Eeprom.
5865  *  Description:
5866  *  Tries to write the user provided value in the Eeprom, at the offset
5867  *  given by the user.
5868  *  Return value:
5869  *  0 on success, -EFAULT on failure.
5870  */
5871
5872 static int s2io_ethtool_seeprom(struct net_device *dev,
5873                                 struct ethtool_eeprom *eeprom,
5874                                 u8 * data_buf)
5875 {
5876         int len = eeprom->len, cnt = 0;
5877         u64 valid = 0, data;
5878         struct s2io_nic *sp = dev->priv;
5879
5880         if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
5881                 DBG_PRINT(ERR_DBG,
5882                           "ETHTOOL_WRITE_EEPROM Err: Magic value ");
5883                 DBG_PRINT(ERR_DBG, "is wrong, Its not 0x%x\n",
5884                           eeprom->magic);
5885                 return -EFAULT;
5886         }
5887
5888         while (len) {
5889                 data = (u32) data_buf[cnt] & 0x000000FF;
5890                 if (data) {
5891                         valid = (u32) (data << 24);
5892                 } else
5893                         valid = data;
5894
5895                 if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
5896                         DBG_PRINT(ERR_DBG,
5897                                   "ETHTOOL_WRITE_EEPROM Err: Cannot ");
5898                         DBG_PRINT(ERR_DBG,
5899                                   "write into the specified offset\n");
5900                         return -EFAULT;
5901                 }
5902                 cnt++;
5903                 len--;
5904         }
5905
5906         return 0;
5907 }
5908
5909 /**
5910  * s2io_register_test - reads and writes into all clock domains.
5911  * @sp : private member of the device structure, which is a pointer to the
5912  * s2io_nic structure.
5913  * @data : variable that returns the result of each of the test conducted b
5914  * by the driver.
5915  * Description:
5916  * Read and write into all clock domains. The NIC has 3 clock domains,
5917  * see that registers in all the three regions are accessible.
5918  * Return value:
5919  * 0 on success.
5920  */
5921
5922 static int s2io_register_test(struct s2io_nic * sp, uint64_t * data)
5923 {
5924         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5925         u64 val64 = 0, exp_val;
5926         int fail = 0;
5927
5928         val64 = readq(&bar0->pif_rd_swapper_fb);
5929         if (val64 != 0x123456789abcdefULL) {
5930                 fail = 1;
5931                 DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
5932         }
5933
5934         val64 = readq(&bar0->rmac_pause_cfg);
5935         if (val64 != 0xc000ffff00000000ULL) {
5936                 fail = 1;
5937                 DBG_PRINT(INFO_DBG, "Read Test level 2 fails\n");
5938         }
5939
5940         val64 = readq(&bar0->rx_queue_cfg);
5941         if (sp->device_type == XFRAME_II_DEVICE)
5942                 exp_val = 0x0404040404040404ULL;
5943         else
5944                 exp_val = 0x0808080808080808ULL;
5945         if (val64 != exp_val) {
5946                 fail = 1;
5947                 DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
5948         }
5949
5950         val64 = readq(&bar0->xgxs_efifo_cfg);
5951         if (val64 != 0x000000001923141EULL) {
5952                 fail = 1;
5953                 DBG_PRINT(INFO_DBG, "Read Test level 4 fails\n");
5954         }
5955
5956         val64 = 0x5A5A5A5A5A5A5A5AULL;
5957         writeq(val64, &bar0->xmsi_data);
5958         val64 = readq(&bar0->xmsi_data);
5959         if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
5960                 fail = 1;
5961                 DBG_PRINT(ERR_DBG, "Write Test level 1 fails\n");
5962         }
5963
5964         val64 = 0xA5A5A5A5A5A5A5A5ULL;
5965         writeq(val64, &bar0->xmsi_data);
5966         val64 = readq(&bar0->xmsi_data);
5967         if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
5968                 fail = 1;
5969                 DBG_PRINT(ERR_DBG, "Write Test level 2 fails\n");
5970         }
5971
5972         *data = fail;
5973         return fail;
5974 }
5975
5976 /**
5977  * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
5978  * @sp : private member of the device structure, which is a pointer to the
5979  * s2io_nic structure.
5980  * @data:variable that returns the result of each of the test conducted by
5981  * the driver.
5982  * Description:
5983  * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
5984  * register.
5985  * Return value:
5986  * 0 on success.
5987  */
5988
5989 static int s2io_eeprom_test(struct s2io_nic * sp, uint64_t * data)
5990 {
5991         int fail = 0;
5992         u64 ret_data, org_4F0, org_7F0;
5993         u8 saved_4F0 = 0, saved_7F0 = 0;
5994         struct net_device *dev = sp->dev;
5995
5996         /* Test Write Error at offset 0 */
5997         /* Note that SPI interface allows write access to all areas
5998          * of EEPROM. Hence doing all negative testing only for Xframe I.
5999          */
6000         if (sp->device_type == XFRAME_I_DEVICE)
6001                 if (!write_eeprom(sp, 0, 0, 3))
6002                         fail = 1;
6003
6004         /* Save current values at offsets 0x4F0 and 0x7F0 */
6005         if (!read_eeprom(sp, 0x4F0, &org_4F0))
6006                 saved_4F0 = 1;
6007         if (!read_eeprom(sp, 0x7F0, &org_7F0))
6008                 saved_7F0 = 1;
6009
6010         /* Test Write at offset 4f0 */
6011         if (write_eeprom(sp, 0x4F0, 0x012345, 3))
6012                 fail = 1;
6013         if (read_eeprom(sp, 0x4F0, &ret_data))
6014                 fail = 1;
6015
6016         if (ret_data != 0x012345) {
6017                 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
6018                         "Data written %llx Data read %llx\n",
6019                         dev->name, (unsigned long long)0x12345,
6020                         (unsigned long long)ret_data);
6021                 fail = 1;
6022         }
6023
6024         /* Reset the EEPROM data go FFFF */
6025         write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
6026
6027         /* Test Write Request Error at offset 0x7c */
6028         if (sp->device_type == XFRAME_I_DEVICE)
6029                 if (!write_eeprom(sp, 0x07C, 0, 3))
6030                         fail = 1;
6031
6032         /* Test Write Request at offset 0x7f0 */
6033         if (write_eeprom(sp, 0x7F0, 0x012345, 3))
6034                 fail = 1;
6035         if (read_eeprom(sp, 0x7F0, &ret_data))
6036                 fail = 1;
6037
6038         if (ret_data != 0x012345) {
6039                 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
6040                         "Data written %llx Data read %llx\n",
6041                         dev->name, (unsigned long long)0x12345,
6042                         (unsigned long long)ret_data);
6043                 fail = 1;
6044         }
6045
6046         /* Reset the EEPROM data go FFFF */
6047         write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
6048
6049         if (sp->device_type == XFRAME_I_DEVICE) {
6050                 /* Test Write Error at offset 0x80 */
6051                 if (!write_eeprom(sp, 0x080, 0, 3))
6052                         fail = 1;
6053
6054                 /* Test Write Error at offset 0xfc */
6055                 if (!write_eeprom(sp, 0x0FC, 0, 3))
6056                         fail = 1;
6057
6058                 /* Test Write Error at offset 0x100 */
6059                 if (!write_eeprom(sp, 0x100, 0, 3))
6060                         fail = 1;
6061
6062                 /* Test Write Error at offset 4ec */
6063                 if (!write_eeprom(sp, 0x4EC, 0, 3))
6064                         fail = 1;
6065         }
6066
6067         /* Restore values at offsets 0x4F0 and 0x7F0 */
6068         if (saved_4F0)
6069                 write_eeprom(sp, 0x4F0, org_4F0, 3);
6070         if (saved_7F0)
6071                 write_eeprom(sp, 0x7F0, org_7F0, 3);
6072
6073         *data = fail;
6074         return fail;
6075 }
6076
6077 /**
6078  * s2io_bist_test - invokes the MemBist test of the card .
6079  * @sp : private member of the device structure, which is a pointer to the
6080  * s2io_nic structure.
6081  * @data:variable that returns the result of each of the test conducted by
6082  * the driver.
6083  * Description:
6084  * This invokes the MemBist test of the card. We give around
6085  * 2 secs time for the Test to complete. If it's still not complete
6086  * within this peiod, we consider that the test failed.
6087  * Return value:
6088  * 0 on success and -1 on failure.
6089  */
6090
6091 static int s2io_bist_test(struct s2io_nic * sp, uint64_t * data)
6092 {
6093         u8 bist = 0;
6094         int cnt = 0, ret = -1;
6095
6096         pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6097         bist |= PCI_BIST_START;
6098         pci_write_config_word(sp->pdev, PCI_BIST, bist);
6099
6100         while (cnt < 20) {
6101                 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6102                 if (!(bist & PCI_BIST_START)) {
6103                         *data = (bist & PCI_BIST_CODE_MASK);
6104                         ret = 0;
6105                         break;
6106                 }
6107                 msleep(100);
6108                 cnt++;
6109         }
6110
6111         return ret;
6112 }
6113
6114 /**
6115  * s2io-link_test - verifies the link state of the nic
6116  * @sp ; private member of the device structure, which is a pointer to the
6117  * s2io_nic structure.
6118  * @data: variable that returns the result of each of the test conducted by
6119  * the driver.
6120  * Description:
6121  * The function verifies the link state of the NIC and updates the input
6122  * argument 'data' appropriately.
6123  * Return value:
6124  * 0 on success.
6125  */
6126
6127 static int s2io_link_test(struct s2io_nic * sp, uint64_t * data)
6128 {
6129         struct XENA_dev_config __iomem *bar0 = sp->bar0;
6130         u64 val64;
6131
6132         val64 = readq(&bar0->adapter_status);
6133         if(!(LINK_IS_UP(val64)))
6134                 *data = 1;
6135         else
6136                 *data = 0;
6137
6138         return *data;
6139 }
6140
6141 /**
6142  * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
6143  * @sp - private member of the device structure, which is a pointer to the
6144  * s2io_nic structure.
6145  * @data - variable that returns the result of each of the test
6146  * conducted by the driver.
6147  * Description:
6148  *  This is one of the offline test that tests the read and write
6149  *  access to the RldRam chip on the NIC.
6150  * Return value:
6151  *  0 on success.
6152  */
6153
6154 static int s2io_rldram_test(struct s2io_nic * sp, uint64_t * data)
6155 {
6156         struct XENA_dev_config __iomem *bar0 = sp->bar0;
6157         u64 val64;
6158         int cnt, iteration = 0, test_fail = 0;
6159
6160         val64 = readq(&bar0->adapter_control);
6161         val64 &= ~ADAPTER_ECC_EN;
6162         writeq(val64, &bar0->adapter_control);
6163
6164         val64 = readq(&bar0->mc_rldram_test_ctrl);
6165         val64 |= MC_RLDRAM_TEST_MODE;
6166         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6167
6168         val64 = readq(&bar0->mc_rldram_mrs);
6169         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
6170         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6171
6172         val64 |= MC_RLDRAM_MRS_ENABLE;
6173         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6174
6175         while (iteration < 2) {
6176                 val64 = 0x55555555aaaa0000ULL;
6177                 if (iteration == 1) {
6178                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6179                 }
6180                 writeq(val64, &bar0->mc_rldram_test_d0);
6181
6182                 val64 = 0xaaaa5a5555550000ULL;
6183                 if (iteration == 1) {
6184                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6185                 }
6186                 writeq(val64, &bar0->mc_rldram_test_d1);
6187
6188                 val64 = 0x55aaaaaaaa5a0000ULL;
6189                 if (iteration == 1) {
6190                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6191                 }
6192                 writeq(val64, &bar0->mc_rldram_test_d2);
6193
6194                 val64 = (u64) (0x0000003ffffe0100ULL);
6195                 writeq(val64, &bar0->mc_rldram_test_add);
6196
6197                 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
6198                         MC_RLDRAM_TEST_GO;
6199                 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6200
6201                 for (cnt = 0; cnt < 5; cnt++) {
6202                         val64 = readq(&bar0->mc_rldram_test_ctrl);
6203                         if (val64 & MC_RLDRAM_TEST_DONE)
6204                                 break;
6205                         msleep(200);
6206                 }
6207
6208                 if (cnt == 5)
6209                         break;
6210
6211                 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
6212                 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6213
6214                 for (cnt = 0; cnt < 5; cnt++) {
6215                         val64 = readq(&bar0->mc_rldram_test_ctrl);
6216                         if (val64 & MC_RLDRAM_TEST_DONE)
6217                                 break;
6218                         msleep(500);
6219                 }
6220
6221                 if (cnt == 5)
6222                         break;
6223
6224                 val64 = readq(&bar0->mc_rldram_test_ctrl);
6225                 if (!(val64 & MC_RLDRAM_TEST_PASS))
6226                         test_fail = 1;
6227
6228                 iteration++;
6229         }
6230
6231         *data = test_fail;
6232
6233         /* Bring the adapter out of test mode */
6234         SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
6235
6236         return test_fail;
6237 }
6238
6239 /**
6240  *  s2io_ethtool_test - conducts 6 tsets to determine the health of card.
6241  *  @sp : private member of the device structure, which is a pointer to the
6242  *  s2io_nic structure.
6243  *  @ethtest : pointer to a ethtool command specific structure that will be
6244  *  returned to the user.
6245  *  @data : variable that returns the result of each of the test
6246  * conducted by the driver.
6247  * Description:
6248  *  This function conducts 6 tests ( 4 offline and 2 online) to determine
6249  *  the health of the card.
6250  * Return value:
6251  *  void
6252  */
6253
6254 static void s2io_ethtool_test(struct net_device *dev,
6255                               struct ethtool_test *ethtest,
6256                               uint64_t * data)
6257 {
6258         struct s2io_nic *sp = dev->priv;
6259         int orig_state = netif_running(sp->dev);
6260
6261         if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
6262                 /* Offline Tests. */
6263                 if (orig_state)
6264                         s2io_close(sp->dev);
6265
6266                 if (s2io_register_test(sp, &data[0]))
6267                         ethtest->flags |= ETH_TEST_FL_FAILED;
6268
6269                 s2io_reset(sp);
6270
6271                 if (s2io_rldram_test(sp, &data[3]))
6272                         ethtest->flags |= ETH_TEST_FL_FAILED;
6273
6274                 s2io_reset(sp);
6275
6276                 if (s2io_eeprom_test(sp, &data[1]))
6277                         ethtest->flags |= ETH_TEST_FL_FAILED;
6278
6279                 if (s2io_bist_test(sp, &data[4]))
6280                         ethtest->flags |= ETH_TEST_FL_FAILED;
6281
6282                 if (orig_state)
6283                         s2io_open(sp->dev);
6284
6285                 data[2] = 0;
6286         } else {
6287                 /* Online Tests. */
6288                 if (!orig_state) {
6289                         DBG_PRINT(ERR_DBG,
6290                                   "%s: is not up, cannot run test\n",
6291                                   dev->name);
6292                         data[0] = -1;
6293                         data[1] = -1;
6294                         data[2] = -1;
6295                         data[3] = -1;
6296                         data[4] = -1;
6297                 }
6298
6299                 if (s2io_link_test(sp, &data[2]))
6300                         ethtest->flags |= ETH_TEST_FL_FAILED;
6301
6302                 data[0] = 0;
6303                 data[1] = 0;
6304                 data[3] = 0;
6305                 data[4] = 0;
6306         }
6307 }
6308
6309 static void s2io_get_ethtool_stats(struct net_device *dev,
6310                                    struct ethtool_stats *estats,
6311                                    u64 * tmp_stats)
6312 {
6313         int i = 0, k;
6314         struct s2io_nic *sp = dev->priv;
6315         struct stat_block *stat_info = sp->mac_control.stats_info;
6316
6317         s2io_updt_stats(sp);
6318         tmp_stats[i++] =
6319                 (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32  |
6320                 le32_to_cpu(stat_info->tmac_frms);
6321         tmp_stats[i++] =
6322                 (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
6323                 le32_to_cpu(stat_info->tmac_data_octets);
6324         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
6325         tmp_stats[i++] =
6326                 (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
6327                 le32_to_cpu(stat_info->tmac_mcst_frms);
6328         tmp_stats[i++] =
6329                 (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
6330                 le32_to_cpu(stat_info->tmac_bcst_frms);
6331         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
6332         tmp_stats[i++] =
6333                 (u64)le32_to_cpu(stat_info->tmac_ttl_octets_oflow) << 32 |
6334                 le32_to_cpu(stat_info->tmac_ttl_octets);
6335         tmp_stats[i++] =
6336                 (u64)le32_to_cpu(stat_info->tmac_ucst_frms_oflow) << 32 |
6337                 le32_to_cpu(stat_info->tmac_ucst_frms);
6338         tmp_stats[i++] =
6339                 (u64)le32_to_cpu(stat_info->tmac_nucst_frms_oflow) << 32 |
6340                 le32_to_cpu(stat_info->tmac_nucst_frms);
6341         tmp_stats[i++] =
6342                 (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
6343                 le32_to_cpu(stat_info->tmac_any_err_frms);
6344         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_ttl_less_fb_octets);
6345         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
6346         tmp_stats[i++] =
6347                 (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
6348                 le32_to_cpu(stat_info->tmac_vld_ip);
6349         tmp_stats[i++] =
6350                 (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
6351                 le32_to_cpu(stat_info->tmac_drop_ip);
6352         tmp_stats[i++] =
6353                 (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
6354                 le32_to_cpu(stat_info->tmac_icmp);
6355         tmp_stats[i++] =
6356                 (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
6357                 le32_to_cpu(stat_info->tmac_rst_tcp);
6358         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
6359         tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
6360                 le32_to_cpu(stat_info->tmac_udp);
6361         tmp_stats[i++] =
6362                 (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
6363                 le32_to_cpu(stat_info->rmac_vld_frms);
6364         tmp_stats[i++] =
6365                 (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
6366                 le32_to_cpu(stat_info->rmac_data_octets);
6367         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
6368         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
6369         tmp_stats[i++] =
6370                 (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
6371                 le32_to_cpu(stat_info->rmac_vld_mcst_frms);
6372         tmp_stats[i++] =
6373                 (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
6374                 le32_to_cpu(stat_info->rmac_vld_bcst_frms);
6375         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
6376         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_out_rng_len_err_frms);
6377         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
6378         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
6379         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_unsup_ctrl_frms);
6380         tmp_stats[i++] =
6381                 (u64)le32_to_cpu(stat_info->rmac_ttl_octets_oflow) << 32 |
6382                 le32_to_cpu(stat_info->rmac_ttl_octets);
6383         tmp_stats[i++] =
6384                 (u64)le32_to_cpu(stat_info->rmac_accepted_ucst_frms_oflow)
6385                 << 32 | le32_to_cpu(stat_info->rmac_accepted_ucst_frms);
6386         tmp_stats[i++] =
6387                 (u64)le32_to_cpu(stat_info->rmac_accepted_nucst_frms_oflow)
6388                  << 32 | le32_to_cpu(stat_info->rmac_accepted_nucst_frms);
6389         tmp_stats[i++] =
6390                 (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
6391                 le32_to_cpu(stat_info->rmac_discarded_frms);
6392         tmp_stats[i++] =
6393                 (u64)le32_to_cpu(stat_info->rmac_drop_events_oflow)
6394                  << 32 | le32_to_cpu(stat_info->rmac_drop_events);
6395         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_less_fb_octets);
6396         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_frms);
6397         tmp_stats[i++] =
6398                 (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
6399                 le32_to_cpu(stat_info->rmac_usized_frms);
6400         tmp_stats[i++] =
6401                 (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
6402                 le32_to_cpu(stat_info->rmac_osized_frms);
6403         tmp_stats[i++] =
6404                 (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
6405                 le32_to_cpu(stat_info->rmac_frag_frms);
6406         tmp_stats[i++] =
6407                 (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
6408                 le32_to_cpu(stat_info->rmac_jabber_frms);
6409         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_64_frms);
6410         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_65_127_frms);
6411         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_128_255_frms);
6412         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_256_511_frms);
6413         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_512_1023_frms);
6414         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_1024_1518_frms);
6415         tmp_stats[i++] =
6416                 (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
6417                 le32_to_cpu(stat_info->rmac_ip);
6418         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
6419         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
6420         tmp_stats[i++] =
6421                 (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
6422                 le32_to_cpu(stat_info->rmac_drop_ip);
6423         tmp_stats[i++] =
6424                 (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
6425                 le32_to_cpu(stat_info->rmac_icmp);
6426         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
6427         tmp_stats[i++] =
6428                 (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
6429                 le32_to_cpu(stat_info->rmac_udp);
6430         tmp_stats[i++] =
6431                 (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
6432                 le32_to_cpu(stat_info->rmac_err_drp_udp);
6433         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_err_sym);
6434         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q0);
6435         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q1);
6436         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q2);
6437         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q3);
6438         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q4);
6439         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q5);
6440         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q6);
6441         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q7);
6442         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q0);
6443         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q1);
6444         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q2);
6445         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q3);
6446         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q4);
6447         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q5);
6448         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q6);
6449         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q7);
6450         tmp_stats[i++] =
6451                 (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
6452                 le32_to_cpu(stat_info->rmac_pause_cnt);
6453         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_data_err_cnt);
6454         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_ctrl_err_cnt);
6455         tmp_stats[i++] =
6456                 (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
6457                 le32_to_cpu(stat_info->rmac_accepted_ip);
6458         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
6459         tmp_stats[i++] = le32_to_cpu(stat_info->rd_req_cnt);
6460         tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_cnt);
6461         tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_rtry_cnt);
6462         tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_cnt);
6463         tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_rd_ack_cnt);
6464         tmp_stats[i++] = le32_to_cpu(stat_info->wr_req_cnt);
6465         tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_cnt);
6466         tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_rtry_cnt);
6467         tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_cnt);
6468         tmp_stats[i++] = le32_to_cpu(stat_info->wr_disc_cnt);
6469         tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_wr_ack_cnt);
6470         tmp_stats[i++] = le32_to_cpu(stat_info->txp_wr_cnt);
6471         tmp_stats[i++] = le32_to_cpu(stat_info->txd_rd_cnt);
6472         tmp_stats[i++] = le32_to_cpu(stat_info->txd_wr_cnt);
6473         tmp_stats[i++] = le32_to_cpu(stat_info->rxd_rd_cnt);
6474         tmp_stats[i++] = le32_to_cpu(stat_info->rxd_wr_cnt);
6475         tmp_stats[i++] = le32_to_cpu(stat_info->txf_rd_cnt);
6476         tmp_stats[i++] = le32_to_cpu(stat_info->rxf_wr_cnt);
6477
6478         /* Enhanced statistics exist only for Hercules */
6479         if(sp->device_type == XFRAME_II_DEVICE) {
6480                 tmp_stats[i++] =
6481                                 le64_to_cpu(stat_info->rmac_ttl_1519_4095_frms);
6482                 tmp_stats[i++] =
6483                                 le64_to_cpu(stat_info->rmac_ttl_4096_8191_frms);
6484                 tmp_stats[i++] =
6485                                 le64_to_cpu(stat_info->rmac_ttl_8192_max_frms);
6486                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_gt_max_frms);
6487                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_osized_alt_frms);
6488                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_jabber_alt_frms);
6489                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_gt_max_alt_frms);
6490                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_vlan_frms);
6491                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_len_discard);
6492                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_fcs_discard);
6493                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pf_discard);
6494                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_da_discard);
6495                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_red_discard);
6496                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_rts_discard);
6497                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ingm_full_discard);
6498                 tmp_stats[i++] = le32_to_cpu(stat_info->link_fault_cnt);
6499         }
6500
6501         tmp_stats[i++] = 0;
6502         tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
6503         tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
6504         tmp_stats[i++] = stat_info->sw_stat.parity_err_cnt;
6505         tmp_stats[i++] = stat_info->sw_stat.serious_err_cnt;
6506         tmp_stats[i++] = stat_info->sw_stat.soft_reset_cnt;
6507         tmp_stats[i++] = stat_info->sw_stat.fifo_full_cnt;
6508         for (k = 0; k < MAX_RX_RINGS; k++)
6509                 tmp_stats[i++] = stat_info->sw_stat.ring_full_cnt[k];
6510         tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_high;
6511         tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_low;
6512         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_high;
6513         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_low;
6514         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_high;
6515         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_low;
6516         tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_high;
6517         tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_low;
6518         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_high;
6519         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_low;
6520         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_high;
6521         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_low;
6522         tmp_stats[i++] = stat_info->sw_stat.clubbed_frms_cnt;
6523         tmp_stats[i++] = stat_info->sw_stat.sending_both;
6524         tmp_stats[i++] = stat_info->sw_stat.outof_sequence_pkts;
6525         tmp_stats[i++] = stat_info->sw_stat.flush_max_pkts;
6526         if (stat_info->sw_stat.num_aggregations) {
6527                 u64 tmp = stat_info->sw_stat.sum_avg_pkts_aggregated;
6528                 int count = 0;
6529                 /*
6530                  * Since 64-bit divide does not work on all platforms,
6531                  * do repeated subtraction.
6532                  */
6533                 while (tmp >= stat_info->sw_stat.num_aggregations) {
6534                         tmp -= stat_info->sw_stat.num_aggregations;
6535                         count++;
6536                 }
6537                 tmp_stats[i++] = count;
6538         }
6539         else
6540                 tmp_stats[i++] = 0;
6541         tmp_stats[i++] = stat_info->sw_stat.mem_alloc_fail_cnt;
6542         tmp_stats[i++] = stat_info->sw_stat.pci_map_fail_cnt;
6543         tmp_stats[i++] = stat_info->sw_stat.watchdog_timer_cnt;
6544         tmp_stats[i++] = stat_info->sw_stat.mem_allocated;
6545         tmp_stats[i++] = stat_info->sw_stat.mem_freed;
6546         tmp_stats[i++] = stat_info->sw_stat.link_up_cnt;
6547         tmp_stats[i++] = stat_info->sw_stat.link_down_cnt;
6548         tmp_stats[i++] = stat_info->sw_stat.link_up_time;
6549         tmp_stats[i++] = stat_info->sw_stat.link_down_time;
6550
6551         tmp_stats[i++] = stat_info->sw_stat.tx_buf_abort_cnt;
6552         tmp_stats[i++] = stat_info->sw_stat.tx_desc_abort_cnt;
6553         tmp_stats[i++] = stat_info->sw_stat.tx_parity_err_cnt;
6554         tmp_stats[i++] = stat_info->sw_stat.tx_link_loss_cnt;
6555         tmp_stats[i++] = stat_info->sw_stat.tx_list_proc_err_cnt;
6556
6557         tmp_stats[i++] = stat_info->sw_stat.rx_parity_err_cnt;
6558         tmp_stats[i++] = stat_info->sw_stat.rx_abort_cnt;
6559         tmp_stats[i++] = stat_info->sw_stat.rx_parity_abort_cnt;
6560         tmp_stats[i++] = stat_info->sw_stat.rx_rda_fail_cnt;
6561         tmp_stats[i++] = stat_info->sw_stat.rx_unkn_prot_cnt;
6562         tmp_stats[i++] = stat_info->sw_stat.rx_fcs_err_cnt;
6563         tmp_stats[i++] = stat_info->sw_stat.rx_buf_size_err_cnt;
6564         tmp_stats[i++] = stat_info->sw_stat.rx_rxd_corrupt_cnt;
6565         tmp_stats[i++] = stat_info->sw_stat.rx_unkn_err_cnt;
6566         tmp_stats[i++] = stat_info->sw_stat.tda_err_cnt;
6567         tmp_stats[i++] = stat_info->sw_stat.pfc_err_cnt;
6568         tmp_stats[i++] = stat_info->sw_stat.pcc_err_cnt;
6569         tmp_stats[i++] = stat_info->sw_stat.tti_err_cnt;
6570         tmp_stats[i++] = stat_info->sw_stat.tpa_err_cnt;
6571         tmp_stats[i++] = stat_info->sw_stat.sm_err_cnt;
6572         tmp_stats[i++] = stat_info->sw_stat.lso_err_cnt;
6573         tmp_stats[i++] = stat_info->sw_stat.mac_tmac_err_cnt;
6574         tmp_stats[i++] = stat_info->sw_stat.mac_rmac_err_cnt;
6575         tmp_stats[i++] = stat_info->sw_stat.xgxs_txgxs_err_cnt;
6576         tmp_stats[i++] = stat_info->sw_stat.xgxs_rxgxs_err_cnt;
6577         tmp_stats[i++] = stat_info->sw_stat.rc_err_cnt;
6578         tmp_stats[i++] = stat_info->sw_stat.prc_pcix_err_cnt;
6579         tmp_stats[i++] = stat_info->sw_stat.rpa_err_cnt;
6580         tmp_stats[i++] = stat_info->sw_stat.rda_err_cnt;
6581         tmp_stats[i++] = stat_info->sw_stat.rti_err_cnt;
6582         tmp_stats[i++] = stat_info->sw_stat.mc_err_cnt;
6583 }
6584
6585 static int s2io_ethtool_get_regs_len(struct net_device *dev)
6586 {
6587         return (XENA_REG_SPACE);
6588 }
6589
6590
6591 static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
6592 {
6593         struct s2io_nic *sp = dev->priv;
6594
6595         return (sp->rx_csum);
6596 }
6597
6598 static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
6599 {
6600         struct s2io_nic *sp = dev->priv;
6601
6602         if (data)
6603                 sp->rx_csum = 1;
6604         else
6605                 sp->rx_csum = 0;
6606
6607         return 0;
6608 }
6609
6610 static int s2io_get_eeprom_len(struct net_device *dev)
6611 {
6612         return (XENA_EEPROM_SPACE);
6613 }
6614
6615 static int s2io_get_sset_count(struct net_device *dev, int sset)
6616 {
6617         struct s2io_nic *sp = dev->priv;
6618
6619         switch (sset) {
6620         case ETH_SS_TEST:
6621                 return S2IO_TEST_LEN;
6622         case ETH_SS_STATS:
6623                 switch(sp->device_type) {
6624                 case XFRAME_I_DEVICE:
6625                         return XFRAME_I_STAT_LEN;
6626                 case XFRAME_II_DEVICE:
6627                         return XFRAME_II_STAT_LEN;
6628                 default:
6629                         return 0;
6630                 }
6631         default:
6632                 return -EOPNOTSUPP;
6633         }
6634 }
6635
6636 static void s2io_ethtool_get_strings(struct net_device *dev,
6637                                      u32 stringset, u8 * data)
6638 {
6639         int stat_size = 0;
6640         struct s2io_nic *sp = dev->priv;
6641
6642         switch (stringset) {
6643         case ETH_SS_TEST:
6644                 memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
6645                 break;
6646         case ETH_SS_STATS:
6647                 stat_size = sizeof(ethtool_xena_stats_keys);
6648                 memcpy(data, &ethtool_xena_stats_keys,stat_size);
6649                 if(sp->device_type == XFRAME_II_DEVICE) {
6650                         memcpy(data + stat_size,
6651                                 &ethtool_enhanced_stats_keys,
6652                                 sizeof(ethtool_enhanced_stats_keys));
6653                         stat_size += sizeof(ethtool_enhanced_stats_keys);
6654                 }
6655
6656                 memcpy(data + stat_size, &ethtool_driver_stats_keys,
6657                         sizeof(ethtool_driver_stats_keys));
6658         }
6659 }
6660
6661 static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
6662 {
6663         if (data)
6664                 dev->features |= NETIF_F_IP_CSUM;
6665         else
6666                 dev->features &= ~NETIF_F_IP_CSUM;
6667
6668         return 0;
6669 }
6670
6671 static u32 s2io_ethtool_op_get_tso(struct net_device *dev)
6672 {
6673         return (dev->features & NETIF_F_TSO) != 0;
6674 }
6675 static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data)
6676 {
6677         if (data)
6678                 dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
6679         else
6680                 dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
6681
6682         return 0;
6683 }
6684
6685 static const struct ethtool_ops netdev_ethtool_ops = {
6686         .get_settings = s2io_ethtool_gset,
6687         .set_settings = s2io_ethtool_sset,
6688         .get_drvinfo = s2io_ethtool_gdrvinfo,
6689         .get_regs_len = s2io_ethtool_get_regs_len,
6690         .get_regs = s2io_ethtool_gregs,
6691         .get_link = ethtool_op_get_link,
6692         .get_eeprom_len = s2io_get_eeprom_len,
6693         .get_eeprom = s2io_ethtool_geeprom,
6694         .set_eeprom = s2io_ethtool_seeprom,
6695         .get_ringparam = s2io_ethtool_gringparam,
6696         .get_pauseparam = s2io_ethtool_getpause_data,
6697         .set_pauseparam = s2io_ethtool_setpause_data,
6698         .get_rx_csum = s2io_ethtool_get_rx_csum,
6699         .set_rx_csum = s2io_ethtool_set_rx_csum,
6700         .set_tx_csum = s2io_ethtool_op_set_tx_csum,
6701         .set_sg = ethtool_op_set_sg,
6702         .get_tso = s2io_ethtool_op_get_tso,
6703         .set_tso = s2io_ethtool_op_set_tso,
6704         .set_ufo = ethtool_op_set_ufo,
6705         .self_test = s2io_ethtool_test,
6706         .get_strings = s2io_ethtool_get_strings,
6707         .phys_id = s2io_ethtool_idnic,
6708         .get_ethtool_stats = s2io_get_ethtool_stats,
6709         .get_sset_count = s2io_get_sset_count,
6710 };
6711
6712 /**
6713  *  s2io_ioctl - Entry point for the Ioctl
6714  *  @dev :  Device pointer.
6715  *  @ifr :  An IOCTL specefic structure, that can contain a pointer to
6716  *  a proprietary structure used to pass information to the driver.
6717  *  @cmd :  This is used to distinguish between the different commands that
6718  *  can be passed to the IOCTL functions.
6719  *  Description:
6720  *  Currently there are no special functionality supported in IOCTL, hence
6721  *  function always return EOPNOTSUPPORTED
6722  */
6723
6724 static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
6725 {
6726         return -EOPNOTSUPP;
6727 }
6728
6729 /**
6730  *  s2io_change_mtu - entry point to change MTU size for the device.
6731  *   @dev : device pointer.
6732  *   @new_mtu : the new MTU size for the device.
6733  *   Description: A driver entry point to change MTU size for the device.
6734  *   Before changing the MTU the device must be stopped.
6735  *  Return value:
6736  *   0 on success and an appropriate (-)ve integer as defined in errno.h
6737  *   file on failure.
6738  */
6739
6740 static int s2io_change_mtu(struct net_device *dev, int new_mtu)
6741 {
6742         struct s2io_nic *sp = dev->priv;
6743         int ret = 0;
6744
6745         if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
6746                 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
6747                           dev->name);
6748                 return -EPERM;
6749         }
6750
6751         dev->mtu = new_mtu;
6752         if (netif_running(dev)) {
6753                 s2io_stop_all_tx_queue(sp);
6754                 s2io_card_down(sp);
6755                 ret = s2io_card_up(sp);
6756                 if (ret) {
6757                         DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
6758                                   __FUNCTION__);
6759                         return ret;
6760                 }
6761                 s2io_wake_all_tx_queue(sp);
6762         } else { /* Device is down */
6763                 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6764                 u64 val64 = new_mtu;
6765
6766                 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
6767         }
6768
6769         return ret;
6770 }
6771
6772 /**
6773  *  s2io_tasklet - Bottom half of the ISR.
6774  *  @dev_adr : address of the device structure in dma_addr_t format.
6775  *  Description:
6776  *  This is the tasklet or the bottom half of the ISR. This is
6777  *  an extension of the ISR which is scheduled by the scheduler to be run
6778  *  when the load on the CPU is low. All low priority tasks of the ISR can
6779  *  be pushed into the tasklet. For now the tasklet is used only to
6780  *  replenish the Rx buffers in the Rx buffer descriptors.
6781  *  Return value:
6782  *  void.
6783  */
6784
6785 static void s2io_tasklet(unsigned long dev_addr)
6786 {
6787         struct net_device *dev = (struct net_device *) dev_addr;
6788         struct s2io_nic *sp = dev->priv;
6789         int i, ret;
6790         struct mac_info *mac_control;
6791         struct config_param *config;
6792
6793         mac_control = &sp->mac_control;
6794         config = &sp->config;
6795
6796         if (!TASKLET_IN_USE) {
6797                 for (i = 0; i < config->rx_ring_num; i++) {
6798                         ret = fill_rx_buffers(sp, i);
6799                         if (ret == -ENOMEM) {
6800                                 DBG_PRINT(INFO_DBG, "%s: Out of ",
6801                                           dev->name);
6802                                 DBG_PRINT(INFO_DBG, "memory in tasklet\n");
6803                                 break;
6804                         } else if (ret == -EFILL) {
6805                                 DBG_PRINT(INFO_DBG,
6806                                           "%s: Rx Ring %d is full\n",
6807                                           dev->name, i);
6808                                 break;
6809                         }
6810                 }
6811                 clear_bit(0, (&sp->tasklet_status));
6812         }
6813 }
6814
6815 /**
6816  * s2io_set_link - Set the LInk status
6817  * @data: long pointer to device private structue
6818  * Description: Sets the link status for the adapter
6819  */
6820
6821 static void s2io_set_link(struct work_struct *work)
6822 {
6823         struct s2io_nic *nic = container_of(work, struct s2io_nic, set_link_task);
6824         struct net_device *dev = nic->dev;
6825         struct XENA_dev_config __iomem *bar0 = nic->bar0;
6826         register u64 val64;
6827         u16 subid;
6828
6829         rtnl_lock();
6830
6831         if (!netif_running(dev))
6832                 goto out_unlock;
6833
6834         if (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(nic->state))) {
6835                 /* The card is being reset, no point doing anything */
6836                 goto out_unlock;
6837         }
6838
6839         subid = nic->pdev->subsystem_device;
6840         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
6841                 /*
6842                  * Allow a small delay for the NICs self initiated
6843                  * cleanup to complete.
6844                  */
6845                 msleep(100);
6846         }
6847
6848         val64 = readq(&bar0->adapter_status);
6849         if (LINK_IS_UP(val64)) {
6850                 if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) {
6851                         if (verify_xena_quiescence(nic)) {
6852                                 val64 = readq(&bar0->adapter_control);
6853                                 val64 |= ADAPTER_CNTL_EN;
6854                                 writeq(val64, &bar0->adapter_control);
6855                                 if (CARDS_WITH_FAULTY_LINK_INDICATORS(
6856                                         nic->device_type, subid)) {
6857                                         val64 = readq(&bar0->gpio_control);
6858                                         val64 |= GPIO_CTRL_GPIO_0;
6859                                         writeq(val64, &bar0->gpio_control);
6860                                         val64 = readq(&bar0->gpio_control);
6861                                 } else {
6862                                         val64 |= ADAPTER_LED_ON;
6863                                         writeq(val64, &bar0->adapter_control);
6864                                 }
6865                                 nic->device_enabled_once = TRUE;
6866                         } else {
6867                                 DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
6868                                 DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
6869                                 s2io_stop_all_tx_queue(nic);
6870                         }
6871                 }
6872                 val64 = readq(&bar0->adapter_control);
6873                 val64 |= ADAPTER_LED_ON;
6874                 writeq(val64, &bar0->adapter_control);
6875                 s2io_link(nic, LINK_UP);
6876         } else {
6877                 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
6878                                                       subid)) {
6879                         val64 = readq(&bar0->gpio_control);
6880                         val64 &= ~GPIO_CTRL_GPIO_0;
6881                         writeq(val64, &bar0->gpio_control);
6882                         val64 = readq(&bar0->gpio_control);
6883                 }
6884                 /* turn off LED */
6885                 val64 = readq(&bar0->adapter_control);
6886                 val64 = val64 &(~ADAPTER_LED_ON);
6887                 writeq(val64, &bar0->adapter_control);
6888                 s2io_link(nic, LINK_DOWN);
6889         }
6890         clear_bit(__S2IO_STATE_LINK_TASK, &(nic->state));
6891
6892 out_unlock:
6893         rtnl_unlock();
6894 }
6895
6896 static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
6897                                 struct buffAdd *ba,
6898                                 struct sk_buff **skb, u64 *temp0, u64 *temp1,
6899                                 u64 *temp2, int size)
6900 {
6901         struct net_device *dev = sp->dev;
6902         struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
6903
6904         if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) {
6905                 struct RxD1 *rxdp1 = (struct RxD1 *)rxdp;
6906                 /* allocate skb */
6907                 if (*skb) {
6908                         DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
6909                         /*
6910                          * As Rx frame are not going to be processed,
6911                          * using same mapped address for the Rxd
6912                          * buffer pointer
6913                          */
6914                         rxdp1->Buffer0_ptr = *temp0;
6915                 } else {
6916                         *skb = dev_alloc_skb(size);
6917                         if (!(*skb)) {
6918                                 DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
6919                                 DBG_PRINT(INFO_DBG, "memory to allocate ");
6920                                 DBG_PRINT(INFO_DBG, "1 buf mode SKBs\n");
6921                                 sp->mac_control.stats_info->sw_stat. \
6922                                         mem_alloc_fail_cnt++;
6923                                 return -ENOMEM ;
6924                         }
6925                         sp->mac_control.stats_info->sw_stat.mem_allocated
6926                                 += (*skb)->truesize;
6927                         /* storing the mapped addr in a temp variable
6928                          * such it will be used for next rxd whose
6929                          * Host Control is NULL
6930                          */
6931                         rxdp1->Buffer0_ptr = *temp0 =
6932                                 pci_map_single( sp->pdev, (*skb)->data,
6933                                         size - NET_IP_ALIGN,
6934                                         PCI_DMA_FROMDEVICE);
6935                         if( (rxdp1->Buffer0_ptr == 0) ||
6936                                 (rxdp1->Buffer0_ptr == DMA_ERROR_CODE)) {
6937                                 goto memalloc_failed;
6938                         }
6939                         rxdp->Host_Control = (unsigned long) (*skb);
6940                 }
6941         } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
6942                 struct RxD3 *rxdp3 = (struct RxD3 *)rxdp;
6943                 /* Two buffer Mode */
6944                 if (*skb) {
6945                         rxdp3->Buffer2_ptr = *temp2;
6946                         rxdp3->Buffer0_ptr = *temp0;
6947                         rxdp3->Buffer1_ptr = *temp1;
6948                 } else {
6949                         *skb = dev_alloc_skb(size);
6950                         if (!(*skb)) {
6951                                 DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
6952                                 DBG_PRINT(INFO_DBG, "memory to allocate ");
6953                                 DBG_PRINT(INFO_DBG, "2 buf mode SKBs\n");
6954                                 sp->mac_control.stats_info->sw_stat. \
6955                                         mem_alloc_fail_cnt++;
6956                                 return -ENOMEM;
6957                         }
6958                         sp->mac_control.stats_info->sw_stat.mem_allocated
6959                                 += (*skb)->truesize;
6960                         rxdp3->Buffer2_ptr = *temp2 =
6961                                 pci_map_single(sp->pdev, (*skb)->data,
6962                                                dev->mtu + 4,
6963                                                PCI_DMA_FROMDEVICE);
6964                         if( (rxdp3->Buffer2_ptr == 0) ||
6965                                 (rxdp3->Buffer2_ptr == DMA_ERROR_CODE)) {
6966                                 goto memalloc_failed;
6967                         }
6968                         rxdp3->Buffer0_ptr = *temp0 =
6969                                 pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
6970                                                 PCI_DMA_FROMDEVICE);
6971                         if( (rxdp3->Buffer0_ptr == 0) ||
6972                                 (rxdp3->Buffer0_ptr == DMA_ERROR_CODE)) {
6973                                 pci_unmap_single (sp->pdev,
6974                                         (dma_addr_t)rxdp3->Buffer2_ptr,
6975                                         dev->mtu + 4, PCI_DMA_FROMDEVICE);
6976                                 goto memalloc_failed;
6977                         }
6978                         rxdp->Host_Control = (unsigned long) (*skb);
6979
6980                         /* Buffer-1 will be dummy buffer not used */
6981                         rxdp3->Buffer1_ptr = *temp1 =
6982                                 pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
6983                                                 PCI_DMA_FROMDEVICE);
6984                         if( (rxdp3->Buffer1_ptr == 0) ||
6985                                 (rxdp3->Buffer1_ptr == DMA_ERROR_CODE)) {
6986                                 pci_unmap_single (sp->pdev,
6987                                         (dma_addr_t)rxdp3->Buffer0_ptr,
6988                                         BUF0_LEN, PCI_DMA_FROMDEVICE);
6989                                 pci_unmap_single (sp->pdev,
6990                                         (dma_addr_t)rxdp3->Buffer2_ptr,
6991                                         dev->mtu + 4, PCI_DMA_FROMDEVICE);
6992                                 goto memalloc_failed;
6993                         }
6994                 }
6995         }
6996         return 0;
6997         memalloc_failed:
6998                 stats->pci_map_fail_cnt++;
6999                 stats->mem_freed += (*skb)->truesize;
7000                 dev_kfree_skb(*skb);
7001                 return -ENOMEM;
7002 }
7003
7004 static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
7005                                 int size)
7006 {
7007         struct net_device *dev = sp->dev;
7008         if (sp->rxd_mode == RXD_MODE_1) {
7009                 rxdp->Control_2 = SET_BUFFER0_SIZE_1( size - NET_IP_ALIGN);
7010         } else if (sp->rxd_mode == RXD_MODE_3B) {
7011                 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
7012                 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
7013                 rxdp->Control_2 |= SET_BUFFER2_SIZE_3( dev->mtu + 4);
7014         }
7015 }
7016
7017 static  int rxd_owner_bit_reset(struct s2io_nic *sp)
7018 {
7019         int i, j, k, blk_cnt = 0, size;
7020         struct mac_info * mac_control = &sp->mac_control;
7021         struct config_param *config = &sp->config;
7022         struct net_device *dev = sp->dev;
7023         struct RxD_t *rxdp = NULL;
7024         struct sk_buff *skb = NULL;
7025         struct buffAdd *ba = NULL;
7026         u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
7027
7028         /* Calculate the size based on ring mode */
7029         size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
7030                 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
7031         if (sp->rxd_mode == RXD_MODE_1)
7032                 size += NET_IP_ALIGN;
7033         else if (sp->rxd_mode == RXD_MODE_3B)
7034                 size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
7035
7036         for (i = 0; i < config->rx_ring_num; i++) {
7037                 blk_cnt = config->rx_cfg[i].num_rxd /
7038                         (rxd_count[sp->rxd_mode] +1);
7039
7040                 for (j = 0; j < blk_cnt; j++) {
7041                         for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
7042                                 rxdp = mac_control->rings[i].
7043                                         rx_blocks[j].rxds[k].virt_addr;
7044                                 if(sp->rxd_mode == RXD_MODE_3B)
7045                                         ba = &mac_control->rings[i].ba[j][k];
7046                                 if (set_rxd_buffer_pointer(sp, rxdp, ba,
7047                                                        &skb,(u64 *)&temp0_64,
7048                                                        (u64 *)&temp1_64,
7049                                                        (u64 *)&temp2_64,
7050                                                         size) == ENOMEM) {
7051                                         return 0;
7052                                 }
7053
7054                                 set_rxd_buffer_size(sp, rxdp, size);
7055                                 wmb();
7056                                 /* flip the Ownership bit to Hardware */
7057                                 rxdp->Control_1 |= RXD_OWN_XENA;
7058                         }
7059                 }
7060         }
7061         return 0;
7062
7063 }
7064
7065 static int s2io_add_isr(struct s2io_nic * sp)
7066 {
7067         int ret = 0;
7068         struct net_device *dev = sp->dev;
7069         int err = 0;
7070
7071         if (sp->config.intr_type == MSI_X)
7072                 ret = s2io_enable_msi_x(sp);
7073         if (ret) {
7074                 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
7075                 sp->config.intr_type = INTA;
7076         }
7077
7078         /* Store the values of the MSIX table in the struct s2io_nic structure */
7079         store_xmsi_data(sp);
7080
7081         /* After proper initialization of H/W, register ISR */
7082         if (sp->config.intr_type == MSI_X) {
7083                 int i, msix_tx_cnt=0,msix_rx_cnt=0;
7084
7085                 for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
7086                         if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
7087                                 sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
7088                                         dev->name, i);
7089                                 err = request_irq(sp->entries[i].vector,
7090                                           s2io_msix_fifo_handle, 0, sp->desc[i],
7091                                                   sp->s2io_entries[i].arg);
7092                                 /* If either data or addr is zero print it */
7093                                 if(!(sp->msix_info[i].addr &&
7094                                         sp->msix_info[i].data)) {
7095                                         DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
7096                                                 "Data:0x%llx\n",sp->desc[i],
7097                                                 (unsigned long long)
7098                                                 sp->msix_info[i].addr,
7099                                                 (unsigned long long)
7100                                                 sp->msix_info[i].data);
7101                                 } else {
7102                                         msix_tx_cnt++;
7103                                 }
7104                         } else {
7105                                 sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
7106                                         dev->name, i);
7107                                 err = request_irq(sp->entries[i].vector,
7108                                           s2io_msix_ring_handle, 0, sp->desc[i],
7109                                                   sp->s2io_entries[i].arg);
7110                                 /* If either data or addr is zero print it */
7111                                 if(!(sp->msix_info[i].addr &&
7112                                         sp->msix_info[i].data)) {
7113                                         DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
7114                                                 "Data:0x%llx\n",sp->desc[i],
7115                                                 (unsigned long long)
7116                                                 sp->msix_info[i].addr,
7117                                                 (unsigned long long)
7118                                                 sp->msix_info[i].data);
7119                                 } else {
7120                                         msix_rx_cnt++;
7121                                 }
7122                         }
7123                         if (err) {
7124                                 remove_msix_isr(sp);
7125                                 DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
7126                                           "failed\n", dev->name, i);
7127                                 DBG_PRINT(ERR_DBG, "%s: defaulting to INTA\n",
7128                                                  dev->name);
7129                                 sp->config.intr_type = INTA;
7130                                 break;
7131                         }
7132                         sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
7133                 }
7134                 if (!err) {
7135                         printk(KERN_INFO "MSI-X-TX %d entries enabled\n",
7136                                 msix_tx_cnt);
7137                         printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
7138                                 msix_rx_cnt);
7139                 }
7140         }
7141         if (sp->config.intr_type == INTA) {
7142                 err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
7143                                 sp->name, dev);
7144                 if (err) {
7145                         DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
7146                                   dev->name);
7147                         return -1;
7148                 }
7149         }
7150         return 0;
7151 }
7152 static void s2io_rem_isr(struct s2io_nic * sp)
7153 {
7154         if (sp->config.intr_type == MSI_X)
7155                 remove_msix_isr(sp);
7156         else
7157                 remove_inta_isr(sp);
7158 }
7159
7160 static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
7161 {
7162         int cnt = 0;
7163         struct XENA_dev_config __iomem *bar0 = sp->bar0;
7164         unsigned long flags;
7165         register u64 val64 = 0;
7166         struct config_param *config;
7167         config = &sp->config;
7168
7169         if (!is_s2io_card_up(sp))
7170                 return;
7171
7172         del_timer_sync(&sp->alarm_timer);
7173         /* If s2io_set_link task is executing, wait till it completes. */
7174         while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state))) {
7175                 msleep(50);
7176         }
7177         clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
7178
7179         /* Disable napi */
7180         if (config->napi)
7181                 napi_disable(&sp->napi);
7182
7183         /* disable Tx and Rx traffic on the NIC */
7184         if (do_io)
7185                 stop_nic(sp);
7186
7187         s2io_rem_isr(sp);
7188
7189         /* Kill tasklet. */
7190         tasklet_kill(&sp->task);
7191
7192         /* Check if the device is Quiescent and then Reset the NIC */
7193         while(do_io) {
7194                 /* As per the HW requirement we need to replenish the
7195                  * receive buffer to avoid the ring bump. Since there is
7196                  * no intention of processing the Rx frame at this pointwe are
7197                  * just settting the ownership bit of rxd in Each Rx
7198                  * ring to HW and set the appropriate buffer size
7199                  * based on the ring mode
7200                  */
7201                 rxd_owner_bit_reset(sp);
7202
7203                 val64 = readq(&bar0->adapter_status);
7204                 if (verify_xena_quiescence(sp)) {
7205                         if(verify_pcc_quiescent(sp, sp->device_enabled_once))
7206                         break;
7207                 }
7208
7209                 msleep(50);
7210                 cnt++;
7211                 if (cnt == 10) {
7212                         DBG_PRINT(ERR_DBG,
7213                                   "s2io_close:Device not Quiescent ");
7214                         DBG_PRINT(ERR_DBG, "adaper status reads 0x%llx\n",
7215                                   (unsigned long long) val64);
7216                         break;
7217                 }
7218         }
7219         if (do_io)
7220                 s2io_reset(sp);
7221
7222         /* Free all Tx buffers */
7223         free_tx_buffers(sp);
7224
7225         /* Free all Rx buffers */
7226         spin_lock_irqsave(&sp->rx_lock, flags);
7227         free_rx_buffers(sp);
7228         spin_unlock_irqrestore(&sp->rx_lock, flags);
7229
7230         clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
7231 }
7232
7233 static void s2io_card_down(struct s2io_nic * sp)
7234 {
7235         do_s2io_card_down(sp, 1);
7236 }
7237
7238 static int s2io_card_up(struct s2io_nic * sp)
7239 {
7240         int i, ret = 0;
7241         struct mac_info *mac_control;
7242         struct config_param *config;
7243         struct net_device *dev = (struct net_device *) sp->dev;
7244         u16 interruptible;
7245
7246         /* Initialize the H/W I/O registers */
7247         ret = init_nic(sp);
7248         if (ret != 0) {
7249                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
7250                           dev->name);
7251                 if (ret != -EIO)
7252                         s2io_reset(sp);
7253                 return ret;
7254         }
7255
7256         /*
7257          * Initializing the Rx buffers. For now we are considering only 1
7258          * Rx ring and initializing buffers into 30 Rx blocks
7259          */
7260         mac_control = &sp->mac_control;
7261         config = &sp->config;
7262
7263         for (i = 0; i < config->rx_ring_num; i++) {
7264                 if ((ret = fill_rx_buffers(sp, i))) {
7265                         DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
7266                                   dev->name);
7267                         s2io_reset(sp);
7268                         free_rx_buffers(sp);
7269                         return -ENOMEM;
7270                 }
7271                 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
7272                           atomic_read(&sp->rx_bufs_left[i]));
7273         }
7274
7275         /* Initialise napi */
7276         if (config->napi)
7277                 napi_enable(&sp->napi);
7278
7279         /* Maintain the state prior to the open */
7280         if (sp->promisc_flg)
7281                 sp->promisc_flg = 0;
7282         if (sp->m_cast_flg) {
7283                 sp->m_cast_flg = 0;
7284                 sp->all_multi_pos= 0;
7285         }
7286
7287         /* Setting its receive mode */
7288         s2io_set_multicast(dev);
7289
7290         if (sp->lro) {
7291                 /* Initialize max aggregatable pkts per session based on MTU */
7292                 sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
7293                 /* Check if we can use(if specified) user provided value */
7294                 if (lro_max_pkts < sp->lro_max_aggr_per_sess)
7295                         sp->lro_max_aggr_per_sess = lro_max_pkts;
7296         }
7297
7298         /* Enable Rx Traffic and interrupts on the NIC */
7299         if (start_nic(sp)) {
7300                 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
7301                 s2io_reset(sp);
7302                 free_rx_buffers(sp);
7303                 return -ENODEV;
7304         }
7305
7306         /* Add interrupt service routine */
7307         if (s2io_add_isr(sp) != 0) {
7308                 if (sp->config.intr_type == MSI_X)
7309                         s2io_rem_isr(sp);
7310                 s2io_reset(sp);
7311                 free_rx_buffers(sp);
7312                 return -ENODEV;
7313         }
7314
7315         S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
7316
7317         /* Enable tasklet for the device */
7318         tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
7319
7320         /*  Enable select interrupts */
7321         en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
7322         if (sp->config.intr_type != INTA)
7323                 en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
7324         else {
7325                 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
7326                 interruptible |= TX_PIC_INTR;
7327                 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
7328         }
7329
7330         set_bit(__S2IO_STATE_CARD_UP, &sp->state);
7331         return 0;
7332 }
7333
7334 /**
7335  * s2io_restart_nic - Resets the NIC.
7336  * @data : long pointer to the device private structure
7337  * Description:
7338  * This function is scheduled to be run by the s2io_tx_watchdog
7339  * function after 0.5 secs to reset the NIC. The idea is to reduce
7340  * the run time of the watch dog routine which is run holding a
7341  * spin lock.
7342  */
7343
7344 static void s2io_restart_nic(struct work_struct *work)
7345 {
7346         struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task);
7347         struct net_device *dev = sp->dev;
7348
7349         rtnl_lock();
7350
7351         if (!netif_running(dev))
7352                 goto out_unlock;
7353
7354         s2io_card_down(sp);
7355         if (s2io_card_up(sp)) {
7356                 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
7357                           dev->name);
7358         }
7359         s2io_wake_all_tx_queue(sp);
7360         DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
7361                   dev->name);
7362 out_unlock:
7363         rtnl_unlock();
7364 }
7365
7366 /**
7367  *  s2io_tx_watchdog - Watchdog for transmit side.
7368  *  @dev : Pointer to net device structure
7369  *  Description:
7370  *  This function is triggered if the Tx Queue is stopped
7371  *  for a pre-defined amount of time when the Interface is still up.
7372  *  If the Interface is jammed in such a situation, the hardware is
7373  *  reset (by s2io_close) and restarted again (by s2io_open) to
7374  *  overcome any problem that might have been caused in the hardware.
7375  *  Return value:
7376  *  void
7377  */
7378
7379 static void s2io_tx_watchdog(struct net_device *dev)
7380 {
7381         struct s2io_nic *sp = dev->priv;
7382
7383         if (netif_carrier_ok(dev)) {
7384                 sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt++;
7385                 schedule_work(&sp->rst_timer_task);
7386                 sp->mac_control.stats_info->sw_stat.soft_reset_cnt++;
7387         }
7388 }
7389
7390 /**
7391  *   rx_osm_handler - To perform some OS related operations on SKB.
7392  *   @sp: private member of the device structure,pointer to s2io_nic structure.
7393  *   @skb : the socket buffer pointer.
7394  *   @len : length of the packet
7395  *   @cksum : FCS checksum of the frame.
7396  *   @ring_no : the ring from which this RxD was extracted.
7397  *   Description:
7398  *   This function is called by the Rx interrupt serivce routine to perform
7399  *   some OS related operations on the SKB before passing it to the upper
7400  *   layers. It mainly checks if the checksum is OK, if so adds it to the
7401  *   SKBs cksum variable, increments the Rx packet count and passes the SKB
7402  *   to the upper layer. If the checksum is wrong, it increments the Rx
7403  *   packet error count, frees the SKB and returns error.
7404  *   Return value:
7405  *   SUCCESS on success and -1 on failure.
7406  */
7407 static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
7408 {
7409         struct s2io_nic *sp = ring_data->nic;
7410         struct net_device *dev = (struct net_device *) sp->dev;
7411         struct sk_buff *skb = (struct sk_buff *)
7412                 ((unsigned long) rxdp->Host_Control);
7413         int ring_no = ring_data->ring_no;
7414         u16 l3_csum, l4_csum;
7415         unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
7416         struct lro *lro;
7417         u8 err_mask;
7418
7419         skb->dev = dev;
7420
7421         if (err) {
7422                 /* Check for parity error */
7423                 if (err & 0x1) {
7424                         sp->mac_control.stats_info->sw_stat.parity_err_cnt++;
7425                 }
7426                 err_mask = err >> 48;
7427                 switch(err_mask) {
7428                         case 1:
7429                                 sp->mac_control.stats_info->sw_stat.
7430                                 rx_parity_err_cnt++;
7431                         break;
7432
7433                         case 2:
7434                                 sp->mac_control.stats_info->sw_stat.
7435                                 rx_abort_cnt++;
7436                         break;
7437
7438                         case 3:
7439                                 sp->mac_control.stats_info->sw_stat.
7440                                 rx_parity_abort_cnt++;
7441                         break;
7442
7443                         case 4:
7444                                 sp->mac_control.stats_info->sw_stat.
7445                                 rx_rda_fail_cnt++;
7446                         break;
7447
7448                         case 5:
7449                                 sp->mac_control.stats_info->sw_stat.
7450                                 rx_unkn_prot_cnt++;
7451                         break;
7452
7453                         case 6:
7454                                 sp->mac_control.stats_info->sw_stat.
7455                                 rx_fcs_err_cnt++;
7456                         break;
7457
7458                         case 7:
7459                                 sp->mac_control.stats_info->sw_stat.
7460                                 rx_buf_size_err_cnt++;
7461                         break;
7462
7463                         case 8:
7464                                 sp->mac_control.stats_info->sw_stat.
7465                                 rx_rxd_corrupt_cnt++;
7466                         break;
7467
7468                         case 15:
7469                                 sp->mac_control.stats_info->sw_stat.
7470                                 rx_unkn_err_cnt++;
7471                         break;
7472                 }
7473                 /*
7474                 * Drop the packet if bad transfer code. Exception being
7475                 * 0x5, which could be due to unsupported IPv6 extension header.
7476                 * In this case, we let stack handle the packet.
7477                 * Note that in this case, since checksum will be incorrect,
7478                 * stack will validate the same.
7479                 */
7480                 if (err_mask != 0x5) {
7481                         DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
7482                                 dev->name, err_mask);
7483                         sp->stats.rx_crc_errors++;
7484                         sp->mac_control.stats_info->sw_stat.mem_freed
7485                                 += skb->truesize;
7486                         dev_kfree_skb(skb);
7487                         atomic_dec(&sp->rx_bufs_left[ring_no]);
7488                         rxdp->Host_Control = 0;
7489                         return 0;
7490                 }
7491         }
7492
7493         /* Updating statistics */
7494         sp->stats.rx_packets++;
7495         rxdp->Host_Control = 0;
7496         if (sp->rxd_mode == RXD_MODE_1) {
7497                 int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
7498
7499                 sp->stats.rx_bytes += len;
7500                 skb_put(skb, len);
7501
7502         } else if (sp->rxd_mode == RXD_MODE_3B) {
7503                 int get_block = ring_data->rx_curr_get_info.block_index;
7504                 int get_off = ring_data->rx_curr_get_info.offset;
7505                 int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2);
7506                 int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
7507                 unsigned char *buff = skb_push(skb, buf0_len);
7508
7509                 struct buffAdd *ba = &ring_data->ba[get_block][get_off];
7510                 sp->stats.rx_bytes += buf0_len + buf2_len;
7511                 memcpy(buff, ba->ba_0, buf0_len);
7512                 skb_put(skb, buf2_len);
7513         }
7514
7515         if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && ((!sp->lro) ||
7516             (sp->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
7517             (sp->rx_csum)) {
7518                 l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
7519                 l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
7520                 if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
7521                         /*
7522                          * NIC verifies if the Checksum of the received
7523                          * frame is Ok or not and accordingly returns
7524                          * a flag in the RxD.
7525                          */
7526                         skb->ip_summed = CHECKSUM_UNNECESSARY;
7527                         if (sp->lro) {
7528                                 u32 tcp_len;
7529                                 u8 *tcp;
7530                                 int ret = 0;
7531
7532                                 ret = s2io_club_tcp_session(skb->data, &tcp,
7533                                                             &tcp_len, &lro,
7534                                                             rxdp, sp);
7535                                 switch (ret) {
7536                                         case 3: /* Begin anew */
7537                                                 lro->parent = skb;
7538                                                 goto aggregate;
7539                                         case 1: /* Aggregate */
7540                                         {
7541                                                 lro_append_pkt(sp, lro,
7542                                                         skb, tcp_len);
7543                                                 goto aggregate;
7544                                         }
7545                                         case 4: /* Flush session */
7546                                         {
7547                                                 lro_append_pkt(sp, lro,
7548                                                         skb, tcp_len);
7549                                                 queue_rx_frame(lro->parent,
7550                                                         lro->vlan_tag);
7551                                                 clear_lro_session(lro);
7552                                                 sp->mac_control.stats_info->
7553                                                     sw_stat.flush_max_pkts++;
7554                                                 goto aggregate;
7555                                         }
7556                                         case 2: /* Flush both */
7557                                                 lro->parent->data_len =
7558                                                         lro->frags_len;
7559                                                 sp->mac_control.stats_info->
7560                                                      sw_stat.sending_both++;
7561                                                 queue_rx_frame(lro->parent,
7562                                                         lro->vlan_tag);
7563                                                 clear_lro_session(lro);
7564                                                 goto send_up;
7565                                         case 0: /* sessions exceeded */
7566                                         case -1: /* non-TCP or not
7567                                                   * L2 aggregatable
7568                                                   */
7569                                         case 5: /*
7570                                                  * First pkt in session not
7571                                                  * L3/L4 aggregatable
7572                                                  */
7573                                                 break;
7574                                         default:
7575                                                 DBG_PRINT(ERR_DBG,
7576                                                         "%s: Samadhana!!\n",
7577                                                          __FUNCTION__);
7578                                                 BUG();
7579                                 }
7580                         }
7581                 } else {
7582                         /*
7583                          * Packet with erroneous checksum, let the
7584                          * upper layers deal with it.
7585                          */
7586                         skb->ip_summed = CHECKSUM_NONE;
7587                 }
7588         } else
7589                 skb->ip_summed = CHECKSUM_NONE;
7590
7591         sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
7592 send_up:
7593         queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
7594         dev->last_rx = jiffies;
7595 aggregate:
7596         atomic_dec(&sp->rx_bufs_left[ring_no]);
7597         return SUCCESS;
7598 }
7599
7600 /**
7601  *  s2io_link - stops/starts the Tx queue.
7602  *  @sp : private member of the device structure, which is a pointer to the
7603  *  s2io_nic structure.
7604  *  @link : inidicates whether link is UP/DOWN.
7605  *  Description:
7606  *  This function stops/starts the Tx queue depending on whether the link
7607  *  status of the NIC is is down or up. This is called by the Alarm
7608  *  interrupt handler whenever a link change interrupt comes up.
7609  *  Return value:
7610  *  void.
7611  */
7612
7613 static void s2io_link(struct s2io_nic * sp, int link)
7614 {
7615         struct net_device *dev = (struct net_device *) sp->dev;
7616
7617         if (link != sp->last_link_state) {
7618                 init_tti(sp, link);
7619                 if (link == LINK_DOWN) {
7620                         DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
7621                         s2io_stop_all_tx_queue(sp);
7622                         netif_carrier_off(dev);
7623                         if(sp->mac_control.stats_info->sw_stat.link_up_cnt)
7624                         sp->mac_control.stats_info->sw_stat.link_up_time =
7625                                 jiffies - sp->start_time;
7626                         sp->mac_control.stats_info->sw_stat.link_down_cnt++;
7627                 } else {
7628                         DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
7629                         if (sp->mac_control.stats_info->sw_stat.link_down_cnt)
7630                         sp->mac_control.stats_info->sw_stat.link_down_time =
7631                                 jiffies - sp->start_time;
7632                         sp->mac_control.stats_info->sw_stat.link_up_cnt++;
7633                         netif_carrier_on(dev);
7634                         s2io_wake_all_tx_queue(sp);
7635                 }
7636         }
7637         sp->last_link_state = link;
7638         sp->start_time = jiffies;
7639 }
7640
7641 /**
7642  *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
7643  *  @sp : private member of the device structure, which is a pointer to the
7644  *  s2io_nic structure.
7645  *  Description:
7646  *  This function initializes a few of the PCI and PCI-X configuration registers
7647  *  with recommended values.
7648  *  Return value:
7649  *  void
7650  */
7651
7652 static void s2io_init_pci(struct s2io_nic * sp)
7653 {
7654         u16 pci_cmd = 0, pcix_cmd = 0;
7655
7656         /* Enable Data Parity Error Recovery in PCI-X command register. */
7657         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7658                              &(pcix_cmd));
7659         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7660                               (pcix_cmd | 1));
7661         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7662                              &(pcix_cmd));
7663
7664         /* Set the PErr Response bit in PCI command register. */
7665         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7666         pci_write_config_word(sp->pdev, PCI_COMMAND,
7667                               (pci_cmd | PCI_COMMAND_PARITY));
7668         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7669 }
7670
7671 static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
7672         u8 *dev_multiq)
7673 {
7674         if ((tx_fifo_num > MAX_TX_FIFOS) ||
7675                 (tx_fifo_num < 1)) {
7676                 DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos "
7677                         "(%d) not supported\n", tx_fifo_num);
7678
7679                 if (tx_fifo_num < 1)
7680                         tx_fifo_num = 1;
7681                 else
7682                         tx_fifo_num = MAX_TX_FIFOS;
7683
7684                 DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num);
7685                 DBG_PRINT(ERR_DBG, "tx fifos\n");
7686         }
7687
7688 #ifndef CONFIG_NETDEVICES_MULTIQUEUE
7689         if (multiq) {
7690                 DBG_PRINT(ERR_DBG, "s2io: Multiqueue support not enabled\n");
7691                 multiq = 0;
7692         }
7693 #endif
7694         if (multiq)
7695                 *dev_multiq = multiq;
7696
7697         if (tx_steering_type && (1 == tx_fifo_num)) {
7698                 if (tx_steering_type != TX_DEFAULT_STEERING)
7699                         DBG_PRINT(ERR_DBG,
7700                                 "s2io: Tx steering is not supported with "
7701                                 "one fifo. Disabling Tx steering.\n");
7702                 tx_steering_type = NO_STEERING;
7703         }
7704
7705         if ((tx_steering_type < NO_STEERING) ||
7706                 (tx_steering_type > TX_DEFAULT_STEERING)) {
7707                 DBG_PRINT(ERR_DBG, "s2io: Requested transmit steering not "
7708                          "supported\n");
7709                 DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n");
7710                 tx_steering_type = NO_STEERING;
7711         }
7712
7713         if ( rx_ring_num > 8) {
7714                 DBG_PRINT(ERR_DBG, "s2io: Requested number of Rx rings not "
7715                          "supported\n");
7716                 DBG_PRINT(ERR_DBG, "s2io: Default to 8 Rx rings\n");
7717                 rx_ring_num = 8;
7718         }
7719         if (*dev_intr_type != INTA)
7720                 napi = 0;
7721
7722         if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
7723                 DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
7724                           "Defaulting to INTA\n");
7725                 *dev_intr_type = INTA;
7726         }
7727
7728         if ((*dev_intr_type == MSI_X) &&
7729                         ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
7730                         (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
7731                 DBG_PRINT(ERR_DBG, "s2io: Xframe I does not support MSI_X. "
7732                                         "Defaulting to INTA\n");
7733                 *dev_intr_type = INTA;
7734         }
7735
7736         if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) {
7737                 DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n");
7738                 DBG_PRINT(ERR_DBG, "s2io: Defaulting to 1-buffer mode\n");
7739                 rx_ring_mode = 1;
7740         }
7741         return SUCCESS;
7742 }
7743
7744 /**
7745  * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
7746  * or Traffic class respectively.
7747  * @nic: device private variable
7748  * Description: The function configures the receive steering to
7749  * desired receive ring.
7750  * Return Value:  SUCCESS on success and
7751  * '-1' on failure (endian settings incorrect).
7752  */
7753 static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring)
7754 {
7755         struct XENA_dev_config __iomem *bar0 = nic->bar0;
7756         register u64 val64 = 0;
7757
7758         if (ds_codepoint > 63)
7759                 return FAILURE;
7760
7761         val64 = RTS_DS_MEM_DATA(ring);
7762         writeq(val64, &bar0->rts_ds_mem_data);
7763
7764         val64 = RTS_DS_MEM_CTRL_WE |
7765                 RTS_DS_MEM_CTRL_STROBE_NEW_CMD |
7766                 RTS_DS_MEM_CTRL_OFFSET(ds_codepoint);
7767
7768         writeq(val64, &bar0->rts_ds_mem_ctrl);
7769
7770         return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl,
7771                                 RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
7772                                 S2IO_BIT_RESET);
7773 }
7774
7775 /**
7776  *  s2io_init_nic - Initialization of the adapter .
7777  *  @pdev : structure containing the PCI related information of the device.
7778  *  @pre: List of PCI devices supported by the driver listed in s2io_tbl.
7779  *  Description:
7780  *  The function initializes an adapter identified by the pci_dec structure.
7781  *  All OS related initialization including memory and device structure and
7782  *  initlaization of the device private variable is done. Also the swapper
7783  *  control register is initialized to enable read and write into the I/O
7784  *  registers of the device.
7785  *  Return value:
7786  *  returns 0 on success and negative on failure.
7787  */
7788
7789 static int __devinit
7790 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
7791 {
7792         struct s2io_nic *sp;
7793         struct net_device *dev;
7794         int i, j, ret;
7795         int dma_flag = FALSE;
7796         u32 mac_up, mac_down;
7797         u64 val64 = 0, tmp64 = 0;
7798         struct XENA_dev_config __iomem *bar0 = NULL;
7799         u16 subid;
7800         struct mac_info *mac_control;
7801         struct config_param *config;
7802         int mode;
7803         u8 dev_intr_type = intr_type;
7804         u8 dev_multiq = 0;
7805         DECLARE_MAC_BUF(mac);
7806
7807         ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq);
7808         if (ret)
7809                 return ret;
7810
7811         if ((ret = pci_enable_device(pdev))) {
7812                 DBG_PRINT(ERR_DBG,
7813                           "s2io_init_nic: pci_enable_device failed\n");
7814                 return ret;
7815         }
7816
7817         if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
7818                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
7819                 dma_flag = TRUE;
7820                 if (pci_set_consistent_dma_mask
7821                     (pdev, DMA_64BIT_MASK)) {
7822                         DBG_PRINT(ERR_DBG,
7823                                   "Unable to obtain 64bit DMA for \
7824                                         consistent allocations\n");
7825                         pci_disable_device(pdev);
7826                         return -ENOMEM;
7827                 }
7828         } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
7829                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
7830         } else {
7831                 pci_disable_device(pdev);
7832                 return -ENOMEM;
7833         }
7834         if ((ret = pci_request_regions(pdev, s2io_driver_name))) {
7835                 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x \n", __FUNCTION__, ret);
7836                 pci_disable_device(pdev);
7837                 return -ENODEV;
7838         }
7839 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
7840         if (dev_multiq)
7841                 dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
7842         else
7843 #endif
7844         dev = alloc_etherdev(sizeof(struct s2io_nic));
7845         if (dev == NULL) {
7846                 DBG_PRINT(ERR_DBG, "Device allocation failed\n");
7847                 pci_disable_device(pdev);
7848                 pci_release_regions(pdev);
7849                 return -ENODEV;
7850         }
7851
7852         pci_set_master(pdev);
7853         pci_set_drvdata(pdev, dev);
7854         SET_NETDEV_DEV(dev, &pdev->dev);
7855
7856         /*  Private member variable initialized to s2io NIC structure */
7857         sp = dev->priv;
7858         memset(sp, 0, sizeof(struct s2io_nic));
7859         sp->dev = dev;
7860         sp->pdev = pdev;
7861         sp->high_dma_flag = dma_flag;
7862         sp->device_enabled_once = FALSE;
7863         if (rx_ring_mode == 1)
7864                 sp->rxd_mode = RXD_MODE_1;
7865         if (rx_ring_mode == 2)
7866                 sp->rxd_mode = RXD_MODE_3B;
7867
7868         sp->config.intr_type = dev_intr_type;
7869
7870         if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
7871                 (pdev->device == PCI_DEVICE_ID_HERC_UNI))
7872                 sp->device_type = XFRAME_II_DEVICE;
7873         else
7874                 sp->device_type = XFRAME_I_DEVICE;
7875
7876         sp->lro = lro_enable;
7877
7878         /* Initialize some PCI/PCI-X fields of the NIC. */
7879         s2io_init_pci(sp);
7880
7881         /*
7882          * Setting the device configuration parameters.
7883          * Most of these parameters can be specified by the user during
7884          * module insertion as they are module loadable parameters. If
7885          * these parameters are not not specified during load time, they
7886          * are initialized with default values.
7887          */
7888         mac_control = &sp->mac_control;
7889         config = &sp->config;
7890
7891         config->napi = napi;
7892         config->tx_steering_type = tx_steering_type;
7893
7894         /* Tx side parameters. */
7895         if (config->tx_steering_type == TX_PRIORITY_STEERING)
7896                 config->tx_fifo_num = MAX_TX_FIFOS;
7897         else
7898                 config->tx_fifo_num = tx_fifo_num;
7899
7900         /* Initialize the fifos used for tx steering */
7901         if (config->tx_fifo_num < 5) {
7902                         if (config->tx_fifo_num  == 1)
7903                                 sp->total_tcp_fifos = 1;
7904                         else
7905                                 sp->total_tcp_fifos = config->tx_fifo_num - 1;
7906                         sp->udp_fifo_idx = config->tx_fifo_num - 1;
7907                         sp->total_udp_fifos = 1;
7908                         sp->other_fifo_idx = sp->total_tcp_fifos - 1;
7909         } else {
7910                 sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
7911                                                 FIFO_OTHER_MAX_NUM);
7912                 sp->udp_fifo_idx = sp->total_tcp_fifos;
7913                 sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
7914                 sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
7915         }
7916
7917         config->multiq = dev_multiq;
7918         for (i = 0; i < config->tx_fifo_num; i++) {
7919                 config->tx_cfg[i].fifo_len = tx_fifo_len[i];
7920                 config->tx_cfg[i].fifo_priority = i;
7921         }
7922
7923         /* mapping the QoS priority to the configured fifos */
7924         for (i = 0; i < MAX_TX_FIFOS; i++)
7925                 config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i];
7926
7927         /* map the hashing selector table to the configured fifos */
7928         for (i = 0; i < config->tx_fifo_num; i++)
7929                 sp->fifo_selector[i] = fifo_selector[i];
7930
7931
7932         config->tx_intr_type = TXD_INT_TYPE_UTILZ;
7933         for (i = 0; i < config->tx_fifo_num; i++) {
7934                 config->tx_cfg[i].f_no_snoop =
7935                     (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
7936                 if (config->tx_cfg[i].fifo_len < 65) {
7937                         config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
7938                         break;
7939                 }
7940         }
7941         /* + 2 because one Txd for skb->data and one Txd for UFO */
7942         config->max_txds = MAX_SKB_FRAGS + 2;
7943
7944         /* Rx side parameters. */
7945         config->rx_ring_num = rx_ring_num;
7946         for (i = 0; i < MAX_RX_RINGS; i++) {
7947                 config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
7948                     (rxd_count[sp->rxd_mode] + 1);
7949                 config->rx_cfg[i].ring_priority = i;
7950         }
7951
7952         for (i = 0; i < rx_ring_num; i++) {
7953                 config->rx_cfg[i].ring_org = RING_ORG_BUFF1;
7954                 config->rx_cfg[i].f_no_snoop =
7955                     (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
7956         }
7957
7958         /*  Setting Mac Control parameters */
7959         mac_control->rmac_pause_time = rmac_pause_time;
7960         mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
7961         mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
7962
7963
7964         /* Initialize Ring buffer parameters. */
7965         for (i = 0; i < config->rx_ring_num; i++)
7966                 atomic_set(&sp->rx_bufs_left[i], 0);
7967
7968         /*  initialize the shared memory used by the NIC and the host */
7969         if (init_shared_mem(sp)) {
7970                 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
7971                           dev->name);
7972                 ret = -ENOMEM;
7973                 goto mem_alloc_failed;
7974         }
7975
7976         sp->bar0 = ioremap(pci_resource_start(pdev, 0),
7977                                      pci_resource_len(pdev, 0));
7978         if (!sp->bar0) {
7979                 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
7980                           dev->name);
7981                 ret = -ENOMEM;
7982                 goto bar0_remap_failed;
7983         }
7984
7985         sp->bar1 = ioremap(pci_resource_start(pdev, 2),
7986                                      pci_resource_len(pdev, 2));
7987         if (!sp->bar1) {
7988                 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
7989                           dev->name);
7990                 ret = -ENOMEM;
7991                 goto bar1_remap_failed;
7992         }
7993
7994         dev->irq = pdev->irq;
7995         dev->base_addr = (unsigned long) sp->bar0;
7996
7997         /* Initializing the BAR1 address as the start of the FIFO pointer. */
7998         for (j = 0; j < MAX_TX_FIFOS; j++) {
7999                 mac_control->tx_FIFO_start[j] = (struct TxFIFO_element __iomem *)
8000                     (sp->bar1 + (j * 0x00020000));
8001         }
8002
8003         /*  Driver entry points */
8004         dev->open = &s2io_open;
8005         dev->stop = &s2io_close;
8006         dev->hard_start_xmit = &s2io_xmit;
8007         dev->get_stats = &s2io_get_stats;
8008         dev->set_multicast_list = &s2io_set_multicast;
8009         dev->do_ioctl = &s2io_ioctl;
8010         dev->set_mac_address = &s2io_set_mac_addr;
8011         dev->change_mtu = &s2io_change_mtu;
8012         SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
8013         dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
8014         dev->vlan_rx_register = s2io_vlan_rx_register;
8015         dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
8016
8017         /*
8018          * will use eth_mac_addr() for  dev->set_mac_address
8019          * mac address will be set every time dev->open() is called
8020          */
8021         netif_napi_add(dev, &sp->napi, s2io_poll, 32);
8022
8023 #ifdef CONFIG_NET_POLL_CONTROLLER
8024         dev->poll_controller = s2io_netpoll;
8025 #endif
8026
8027         dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
8028         if (sp->high_dma_flag == TRUE)
8029                 dev->features |= NETIF_F_HIGHDMA;
8030         dev->features |= NETIF_F_TSO;
8031         dev->features |= NETIF_F_TSO6;
8032         if ((sp->device_type & XFRAME_II_DEVICE) && (ufo))  {
8033                 dev->features |= NETIF_F_UFO;
8034                 dev->features |= NETIF_F_HW_CSUM;
8035         }
8036 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
8037         if (config->multiq)
8038                 dev->features |= NETIF_F_MULTI_QUEUE;
8039 #endif
8040         dev->tx_timeout = &s2io_tx_watchdog;
8041         dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
8042         INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
8043         INIT_WORK(&sp->set_link_task, s2io_set_link);
8044
8045         pci_save_state(sp->pdev);
8046
8047         /* Setting swapper control on the NIC, for proper reset operation */
8048         if (s2io_set_swapper(sp)) {
8049                 DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
8050                           dev->name);
8051                 ret = -EAGAIN;
8052                 goto set_swap_failed;
8053         }
8054
8055         /* Verify if the Herc works on the slot its placed into */
8056         if (sp->device_type & XFRAME_II_DEVICE) {
8057                 mode = s2io_verify_pci_mode(sp);
8058                 if (mode < 0) {
8059                         DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__);
8060                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
8061                         ret = -EBADSLT;
8062                         goto set_swap_failed;
8063                 }
8064         }
8065
8066         /* Not needed for Herc */
8067         if (sp->device_type & XFRAME_I_DEVICE) {
8068                 /*
8069                  * Fix for all "FFs" MAC address problems observed on
8070                  * Alpha platforms
8071                  */
8072                 fix_mac_address(sp);
8073                 s2io_reset(sp);
8074         }
8075
8076         /*
8077          * MAC address initialization.
8078          * For now only one mac address will be read and used.
8079          */
8080         bar0 = sp->bar0;
8081         val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
8082             RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
8083         writeq(val64, &bar0->rmac_addr_cmd_mem);
8084         wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
8085                       RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET);
8086         tmp64 = readq(&bar0->rmac_addr_data0_mem);
8087         mac_down = (u32) tmp64;
8088         mac_up = (u32) (tmp64 >> 32);
8089
8090         sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
8091         sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
8092         sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
8093         sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
8094         sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
8095         sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
8096
8097         /*  Set the factory defined MAC address initially   */
8098         dev->addr_len = ETH_ALEN;
8099         memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
8100         memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
8101
8102         /* initialize number of multicast & unicast MAC entries variables */
8103         if (sp->device_type == XFRAME_I_DEVICE) {
8104                 config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
8105                 config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
8106                 config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
8107         } else if (sp->device_type == XFRAME_II_DEVICE) {
8108                 config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
8109                 config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
8110                 config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
8111         }
8112
8113         /* store mac addresses from CAM to s2io_nic structure */
8114         do_s2io_store_unicast_mc(sp);
8115
8116          /* Store the values of the MSIX table in the s2io_nic structure */
8117         store_xmsi_data(sp);
8118         /* reset Nic and bring it to known state */
8119         s2io_reset(sp);
8120
8121         /*
8122          * Initialize the tasklet status and link state flags
8123          * and the card state parameter
8124          */
8125         sp->tasklet_status = 0;
8126         sp->state = 0;
8127
8128         /* Initialize spinlocks */
8129         for (i = 0; i < sp->config.tx_fifo_num; i++)
8130                 spin_lock_init(&mac_control->fifos[i].tx_lock);
8131
8132         if (!napi)
8133                 spin_lock_init(&sp->put_lock);
8134         spin_lock_init(&sp->rx_lock);
8135
8136         /*
8137          * SXE-002: Configure link and activity LED to init state
8138          * on driver load.
8139          */
8140         subid = sp->pdev->subsystem_device;
8141         if ((subid & 0xFF) >= 0x07) {
8142                 val64 = readq(&bar0->gpio_control);
8143                 val64 |= 0x0000800000000000ULL;
8144                 writeq(val64, &bar0->gpio_control);
8145                 val64 = 0x0411040400000000ULL;
8146                 writeq(val64, (void __iomem *) bar0 + 0x2700);
8147                 val64 = readq(&bar0->gpio_control);
8148         }
8149
8150         sp->rx_csum = 1;        /* Rx chksum verify enabled by default */
8151
8152         if (register_netdev(dev)) {
8153                 DBG_PRINT(ERR_DBG, "Device registration failed\n");
8154                 ret = -ENODEV;
8155                 goto register_failed;
8156         }
8157         s2io_vpd_read(sp);
8158         DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
8159         DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
8160                   sp->product_name, pdev->revision);
8161         DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
8162                   s2io_driver_version);
8163         DBG_PRINT(ERR_DBG, "%s: MAC ADDR: %s\n",
8164                   dev->name, print_mac(mac, dev->dev_addr));
8165         DBG_PRINT(ERR_DBG, "SERIAL NUMBER: %s\n", sp->serial_num);
8166         if (sp->device_type & XFRAME_II_DEVICE) {
8167                 mode = s2io_print_pci_mode(sp);
8168                 if (mode < 0) {
8169                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
8170                         ret = -EBADSLT;
8171                         unregister_netdev(dev);
8172                         goto set_swap_failed;
8173                 }
8174         }
8175         switch(sp->rxd_mode) {
8176                 case RXD_MODE_1:
8177                     DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
8178                                                 dev->name);
8179                     break;
8180                 case RXD_MODE_3B:
8181                     DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
8182                                                 dev->name);
8183                     break;
8184         }
8185
8186         if (napi)
8187                 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
8188
8189         DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
8190                 sp->config.tx_fifo_num);
8191
8192         switch(sp->config.intr_type) {
8193                 case INTA:
8194                     DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
8195                     break;
8196                 case MSI_X:
8197                     DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
8198                     break;
8199         }
8200         if (sp->config.multiq) {
8201         for (i = 0; i < sp->config.tx_fifo_num; i++)
8202                 mac_control->fifos[i].multiq = config->multiq;
8203                 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
8204                         dev->name);
8205         } else
8206                 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
8207                         dev->name);
8208
8209         switch (sp->config.tx_steering_type) {
8210         case NO_STEERING:
8211                 DBG_PRINT(ERR_DBG, "%s: No steering enabled for"
8212                         " transmit\n", dev->name);
8213                         break;
8214         case TX_PRIORITY_STEERING:
8215                 DBG_PRINT(ERR_DBG, "%s: Priority steering enabled for"
8216                         " transmit\n", dev->name);
8217                 break;
8218         case TX_DEFAULT_STEERING:
8219                 DBG_PRINT(ERR_DBG, "%s: Default steering enabled for"
8220                         " transmit\n", dev->name);
8221         }
8222
8223         if (sp->lro)
8224                 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
8225                           dev->name);
8226         if (ufo)
8227                 DBG_PRINT(ERR_DBG, "%s: UDP Fragmentation Offload(UFO)"
8228                                         " enabled\n", dev->name);
8229         /* Initialize device name */
8230         sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
8231
8232         /*
8233          * Make Link state as off at this point, when the Link change
8234          * interrupt comes the state will be automatically changed to
8235          * the right state.
8236          */
8237         netif_carrier_off(dev);
8238
8239         return 0;
8240
8241       register_failed:
8242       set_swap_failed:
8243         iounmap(sp->bar1);
8244       bar1_remap_failed:
8245         iounmap(sp->bar0);
8246       bar0_remap_failed:
8247       mem_alloc_failed:
8248         free_shared_mem(sp);
8249         pci_disable_device(pdev);
8250         pci_release_regions(pdev);
8251         pci_set_drvdata(pdev, NULL);
8252         free_netdev(dev);
8253
8254         return ret;
8255 }
8256
8257 /**
8258  * s2io_rem_nic - Free the PCI device
8259  * @pdev: structure containing the PCI related information of the device.
8260  * Description: This function is called by the Pci subsystem to release a
8261  * PCI device and free up all resource held up by the device. This could
8262  * be in response to a Hot plug event or when the driver is to be removed
8263  * from memory.
8264  */
8265
8266 static void __devexit s2io_rem_nic(struct pci_dev *pdev)
8267 {
8268         struct net_device *dev =
8269             (struct net_device *) pci_get_drvdata(pdev);
8270         struct s2io_nic *sp;
8271
8272         if (dev == NULL) {
8273                 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
8274                 return;
8275         }
8276
8277         flush_scheduled_work();
8278
8279         sp = dev->priv;
8280         unregister_netdev(dev);
8281
8282         free_shared_mem(sp);
8283         iounmap(sp->bar0);
8284         iounmap(sp->bar1);
8285         pci_release_regions(pdev);
8286         pci_set_drvdata(pdev, NULL);
8287         free_netdev(dev);
8288         pci_disable_device(pdev);
8289 }
8290
8291 /**
8292  * s2io_starter - Entry point for the driver
8293  * Description: This function is the entry point for the driver. It verifies
8294  * the module loadable parameters and initializes PCI configuration space.
8295  */
8296
8297 static int __init s2io_starter(void)
8298 {
8299         return pci_register_driver(&s2io_driver);
8300 }
8301
8302 /**
8303  * s2io_closer - Cleanup routine for the driver
8304  * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
8305  */
8306
8307 static __exit void s2io_closer(void)
8308 {
8309         pci_unregister_driver(&s2io_driver);
8310         DBG_PRINT(INIT_DBG, "cleanup done\n");
8311 }
8312
8313 module_init(s2io_starter);
8314 module_exit(s2io_closer);
8315
8316 static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
8317                 struct tcphdr **tcp, struct RxD_t *rxdp,
8318                 struct s2io_nic *sp)
8319 {
8320         int ip_off;
8321         u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
8322
8323         if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
8324                 DBG_PRINT(INIT_DBG,"%s: Non-TCP frames not supported for LRO\n",
8325                           __FUNCTION__);
8326                 return -1;
8327         }
8328
8329         /* Checking for DIX type or DIX type with VLAN */
8330         if ((l2_type == 0)
8331                 || (l2_type == 4)) {
8332                 ip_off = HEADER_ETHERNET_II_802_3_SIZE;
8333                 /*
8334                  * If vlan stripping is disabled and the frame is VLAN tagged,
8335                  * shift the offset by the VLAN header size bytes.
8336                  */
8337                 if ((!vlan_strip_flag) &&
8338                         (rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
8339                         ip_off += HEADER_VLAN_SIZE;
8340         } else {
8341                 /* LLC, SNAP etc are considered non-mergeable */
8342                 return -1;
8343         }
8344
8345         *ip = (struct iphdr *)((u8 *)buffer + ip_off);
8346         ip_len = (u8)((*ip)->ihl);
8347         ip_len <<= 2;
8348         *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len);
8349
8350         return 0;
8351 }
8352
8353 static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
8354                                   struct tcphdr *tcp)
8355 {
8356         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8357         if ((lro->iph->saddr != ip->saddr) || (lro->iph->daddr != ip->daddr) ||
8358            (lro->tcph->source != tcp->source) || (lro->tcph->dest != tcp->dest))
8359                 return -1;
8360         return 0;
8361 }
8362
8363 static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
8364 {
8365         return(ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2));
8366 }
8367
8368 static void initiate_new_session(struct lro *lro, u8 *l2h,
8369         struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len, u16 vlan_tag)
8370 {
8371         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8372         lro->l2h = l2h;
8373         lro->iph = ip;
8374         lro->tcph = tcp;
8375         lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
8376         lro->tcp_ack = tcp->ack_seq;
8377         lro->sg_num = 1;
8378         lro->total_len = ntohs(ip->tot_len);
8379         lro->frags_len = 0;
8380         lro->vlan_tag = vlan_tag;
8381         /*
8382          * check if we saw TCP timestamp. Other consistency checks have
8383          * already been done.
8384          */
8385         if (tcp->doff == 8) {
8386                 __be32 *ptr;
8387                 ptr = (__be32 *)(tcp+1);
8388                 lro->saw_ts = 1;
8389                 lro->cur_tsval = ntohl(*(ptr+1));
8390                 lro->cur_tsecr = *(ptr+2);
8391         }
8392         lro->in_use = 1;
8393 }
8394
8395 static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro)
8396 {
8397         struct iphdr *ip = lro->iph;
8398         struct tcphdr *tcp = lro->tcph;
8399         __sum16 nchk;
8400         struct stat_block *statinfo = sp->mac_control.stats_info;
8401         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8402
8403         /* Update L3 header */
8404         ip->tot_len = htons(lro->total_len);
8405         ip->check = 0;
8406         nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl);
8407         ip->check = nchk;
8408
8409         /* Update L4 header */
8410         tcp->ack_seq = lro->tcp_ack;
8411         tcp->window = lro->window;
8412
8413         /* Update tsecr field if this session has timestamps enabled */
8414         if (lro->saw_ts) {
8415                 __be32 *ptr = (__be32 *)(tcp + 1);
8416                 *(ptr+2) = lro->cur_tsecr;
8417         }
8418
8419         /* Update counters required for calculation of
8420          * average no. of packets aggregated.
8421          */
8422         statinfo->sw_stat.sum_avg_pkts_aggregated += lro->sg_num;
8423         statinfo->sw_stat.num_aggregations++;
8424 }
8425
8426 static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
8427                 struct tcphdr *tcp, u32 l4_pyld)
8428 {
8429         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8430         lro->total_len += l4_pyld;
8431         lro->frags_len += l4_pyld;
8432         lro->tcp_next_seq += l4_pyld;
8433         lro->sg_num++;
8434
8435         /* Update ack seq no. and window ad(from this pkt) in LRO object */
8436         lro->tcp_ack = tcp->ack_seq;
8437         lro->window = tcp->window;
8438
8439         if (lro->saw_ts) {
8440                 __be32 *ptr;
8441                 /* Update tsecr and tsval from this packet */
8442                 ptr = (__be32 *)(tcp+1);
8443                 lro->cur_tsval = ntohl(*(ptr+1));
8444                 lro->cur_tsecr = *(ptr + 2);
8445         }
8446 }
8447
8448 static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip,
8449                                     struct tcphdr *tcp, u32 tcp_pyld_len)
8450 {
8451         u8 *ptr;
8452
8453         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8454
8455         if (!tcp_pyld_len) {
8456                 /* Runt frame or a pure ack */
8457                 return -1;
8458         }
8459
8460         if (ip->ihl != 5) /* IP has options */
8461                 return -1;
8462
8463         /* If we see CE codepoint in IP header, packet is not mergeable */
8464         if (INET_ECN_is_ce(ipv4_get_dsfield(ip)))
8465                 return -1;
8466
8467         /* If we see ECE or CWR flags in TCP header, packet is not mergeable */
8468         if (tcp->urg || tcp->psh || tcp->rst || tcp->syn || tcp->fin ||
8469                                     tcp->ece || tcp->cwr || !tcp->ack) {
8470                 /*
8471                  * Currently recognize only the ack control word and
8472                  * any other control field being set would result in
8473                  * flushing the LRO session
8474                  */
8475                 return -1;
8476         }
8477
8478         /*
8479          * Allow only one TCP timestamp option. Don't aggregate if
8480          * any other options are detected.
8481          */
8482         if (tcp->doff != 5 && tcp->doff != 8)
8483                 return -1;
8484
8485         if (tcp->doff == 8) {
8486                 ptr = (u8 *)(tcp + 1);
8487                 while (*ptr == TCPOPT_NOP)
8488                         ptr++;
8489                 if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP)
8490                         return -1;
8491
8492                 /* Ensure timestamp value increases monotonically */
8493                 if (l_lro)
8494                         if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2))))
8495                                 return -1;
8496
8497                 /* timestamp echo reply should be non-zero */
8498                 if (*((__be32 *)(ptr+6)) == 0)
8499                         return -1;
8500         }
8501
8502         return 0;
8503 }
8504
8505 static int
8506 s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, struct lro **lro,
8507                       struct RxD_t *rxdp, struct s2io_nic *sp)
8508 {
8509         struct iphdr *ip;
8510         struct tcphdr *tcph;
8511         int ret = 0, i;
8512         u16 vlan_tag = 0;
8513
8514         if (!(ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
8515                                          rxdp, sp))) {
8516                 DBG_PRINT(INFO_DBG,"IP Saddr: %x Daddr: %x\n",
8517                           ip->saddr, ip->daddr);
8518         } else
8519                 return ret;
8520
8521         vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2);
8522         tcph = (struct tcphdr *)*tcp;
8523         *tcp_len = get_l4_pyld_length(ip, tcph);
8524         for (i=0; i<MAX_LRO_SESSIONS; i++) {
8525                 struct lro *l_lro = &sp->lro0_n[i];
8526                 if (l_lro->in_use) {
8527                         if (check_for_socket_match(l_lro, ip, tcph))
8528                                 continue;
8529                         /* Sock pair matched */
8530                         *lro = l_lro;
8531
8532                         if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
8533                                 DBG_PRINT(INFO_DBG, "%s:Out of order. expected "
8534                                           "0x%x, actual 0x%x\n", __FUNCTION__,
8535                                           (*lro)->tcp_next_seq,
8536                                           ntohl(tcph->seq));
8537
8538                                 sp->mac_control.stats_info->
8539                                    sw_stat.outof_sequence_pkts++;
8540                                 ret = 2;
8541                                 break;
8542                         }
8543
8544                         if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,*tcp_len))
8545                                 ret = 1; /* Aggregate */
8546                         else
8547                                 ret = 2; /* Flush both */
8548                         break;
8549                 }
8550         }
8551
8552         if (ret == 0) {
8553                 /* Before searching for available LRO objects,
8554                  * check if the pkt is L3/L4 aggregatable. If not
8555                  * don't create new LRO session. Just send this
8556                  * packet up.
8557                  */
8558                 if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len)) {
8559                         return 5;
8560                 }
8561
8562                 for (i=0; i<MAX_LRO_SESSIONS; i++) {
8563                         struct lro *l_lro = &sp->lro0_n[i];
8564                         if (!(l_lro->in_use)) {
8565                                 *lro = l_lro;
8566                                 ret = 3; /* Begin anew */
8567                                 break;
8568                         }
8569                 }
8570         }
8571
8572         if (ret == 0) { /* sessions exceeded */
8573                 DBG_PRINT(INFO_DBG,"%s:All LRO sessions already in use\n",
8574                           __FUNCTION__);
8575                 *lro = NULL;
8576                 return ret;
8577         }
8578
8579         switch (ret) {
8580                 case 3:
8581                         initiate_new_session(*lro, buffer, ip, tcph, *tcp_len,
8582                                                                 vlan_tag);
8583                         break;
8584                 case 2:
8585                         update_L3L4_header(sp, *lro);
8586                         break;
8587                 case 1:
8588                         aggregate_new_rx(*lro, ip, tcph, *tcp_len);
8589                         if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
8590                                 update_L3L4_header(sp, *lro);
8591                                 ret = 4; /* Flush the LRO */
8592                         }
8593                         break;
8594                 default:
8595                         DBG_PRINT(ERR_DBG,"%s:Dont know, can't say!!\n",
8596                                 __FUNCTION__);
8597                         break;
8598         }
8599
8600         return ret;
8601 }
8602
8603 static void clear_lro_session(struct lro *lro)
8604 {
8605         static u16 lro_struct_size = sizeof(struct lro);
8606
8607         memset(lro, 0, lro_struct_size);
8608 }
8609
8610 static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag)
8611 {
8612         struct net_device *dev = skb->dev;
8613         struct s2io_nic *sp = dev->priv;
8614
8615         skb->protocol = eth_type_trans(skb, dev);
8616         if (sp->vlgrp && vlan_tag
8617                 && (vlan_strip_flag)) {
8618                 /* Queueing the vlan frame to the upper layer */
8619                 if (sp->config.napi)
8620                         vlan_hwaccel_receive_skb(skb, sp->vlgrp, vlan_tag);
8621                 else
8622                         vlan_hwaccel_rx(skb, sp->vlgrp, vlan_tag);
8623         } else {
8624                 if (sp->config.napi)
8625                         netif_receive_skb(skb);
8626                 else
8627                         netif_rx(skb);
8628         }
8629 }
8630
8631 static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
8632                            struct sk_buff *skb,
8633                            u32 tcp_len)
8634 {
8635         struct sk_buff *first = lro->parent;
8636
8637         first->len += tcp_len;
8638         first->data_len = lro->frags_len;
8639         skb_pull(skb, (skb->len - tcp_len));
8640         if (skb_shinfo(first)->frag_list)
8641                 lro->last_frag->next = skb;
8642         else
8643                 skb_shinfo(first)->frag_list = skb;
8644         first->truesize += skb->truesize;
8645         lro->last_frag = skb;
8646         sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
8647         return;
8648 }
8649
8650 /**
8651  * s2io_io_error_detected - called when PCI error is detected
8652  * @pdev: Pointer to PCI device
8653  * @state: The current pci connection state
8654  *
8655  * This function is called after a PCI bus error affecting
8656  * this device has been detected.
8657  */
8658 static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
8659                                                pci_channel_state_t state)
8660 {
8661         struct net_device *netdev = pci_get_drvdata(pdev);
8662         struct s2io_nic *sp = netdev->priv;
8663
8664         netif_device_detach(netdev);
8665
8666         if (netif_running(netdev)) {
8667                 /* Bring down the card, while avoiding PCI I/O */
8668                 do_s2io_card_down(sp, 0);
8669         }
8670         pci_disable_device(pdev);
8671
8672         return PCI_ERS_RESULT_NEED_RESET;
8673 }
8674
8675 /**
8676  * s2io_io_slot_reset - called after the pci bus has been reset.
8677  * @pdev: Pointer to PCI device
8678  *
8679  * Restart the card from scratch, as if from a cold-boot.
8680  * At this point, the card has exprienced a hard reset,
8681  * followed by fixups by BIOS, and has its config space
8682  * set up identically to what it was at cold boot.
8683  */
8684 static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
8685 {
8686         struct net_device *netdev = pci_get_drvdata(pdev);
8687         struct s2io_nic *sp = netdev->priv;
8688
8689         if (pci_enable_device(pdev)) {
8690                 printk(KERN_ERR "s2io: "
8691                        "Cannot re-enable PCI device after reset.\n");
8692                 return PCI_ERS_RESULT_DISCONNECT;
8693         }
8694
8695         pci_set_master(pdev);
8696         s2io_reset(sp);
8697
8698         return PCI_ERS_RESULT_RECOVERED;
8699 }
8700
8701 /**
8702  * s2io_io_resume - called when traffic can start flowing again.
8703  * @pdev: Pointer to PCI device
8704  *
8705  * This callback is called when the error recovery driver tells
8706  * us that its OK to resume normal operation.
8707  */
8708 static void s2io_io_resume(struct pci_dev *pdev)
8709 {
8710         struct net_device *netdev = pci_get_drvdata(pdev);
8711         struct s2io_nic *sp = netdev->priv;
8712
8713         if (netif_running(netdev)) {
8714                 if (s2io_card_up(sp)) {
8715                         printk(KERN_ERR "s2io: "
8716                                "Can't bring device back up after reset.\n");
8717                         return;
8718                 }
8719
8720                 if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
8721                         s2io_card_down(sp);
8722                         printk(KERN_ERR "s2io: "
8723                                "Can't resetore mac addr after reset.\n");
8724                         return;
8725                 }
8726         }
8727
8728         netif_device_attach(netdev);
8729         netif_wake_queue(netdev);
8730 }