git.oblomov.eu Git - linux-2.6/blob - drivers/video/sgivwfb.c

   1 /*
   2  *  linux/drivers/video/sgivwfb.c -- SGI DBE frame buffer device
   3  *
   4  *      Copyright (C) 1999 Silicon Graphics, Inc.
   5  *      Jeffrey Newquist, newquist@engr.sgi.som
   6  *
   7  *  This file is subject to the terms and conditions of the GNU General Public
   8  *  License. See the file COPYING in the main directory of this archive for
   9  *  more details.
  10  */
  11
  12 #include <linux/module.h>
  13 #include <linux/kernel.h>
  14 #include <linux/mm.h>
  15 #include <linux/errno.h>
  16 #include <linux/delay.h>
  17 #include <linux/fb.h>
  18 #include <linux/init.h>
  19 #include <linux/ioport.h>
  20 #include <linux/platform_device.h>
  21
  22 #include <asm/io.h>
  23 #include <asm/mtrr.h>
  24
  25 #include <setup_arch.h>
  26
  27 #define INCLUDE_TIMING_TABLE_DATA
  28 #define DBE_REG_BASE par->regs
  29 #include <video/sgivw.h>
  30
  31 struct sgivw_par {
  32         struct asregs *regs;
  33         u32 cmap_fifo;
  34         u_long timing_num;
  35 };
  36
  37 #define FLATPANEL_SGI_1600SW    5
  38
  39 /*
  40  *  RAM we reserve for the frame buffer. This defines the maximum screen
  41  *  size
  42  *
  43  *  The default can be overridden if the driver is compiled as a module
  44  */
  45
  46 static int ypan = 0;
  47 static int ywrap = 0;
  48
  49 static int flatpanel_id = -1;
  50
  51 static struct fb_fix_screeninfo sgivwfb_fix __initdata = {
  52         .id             = "SGI Vis WS FB",
  53         .type           = FB_TYPE_PACKED_PIXELS,
  54         .visual         = FB_VISUAL_PSEUDOCOLOR,
  55         .mmio_start     = DBE_REG_PHYS,
  56         .mmio_len       = DBE_REG_SIZE,
  57         .accel          = FB_ACCEL_NONE,
  58         .line_length    = 640,
  59 };
  60
  61 static struct fb_var_screeninfo sgivwfb_var __initdata = {
  62         /* 640x480, 8 bpp */
  63         .xres           = 640,
  64         .yres           = 480,
  65         .xres_virtual   = 640,
  66         .yres_virtual   = 480,
  67         .bits_per_pixel = 8,
  68         .red            = { 0, 8, 0 },
  69         .green          = { 0, 8, 0 },
  70         .blue           = { 0, 8, 0 },
  71         .height         = -1,
  72         .width          = -1,
  73         .pixclock       = 20000,
  74         .left_margin    = 64,
  75         .right_margin   = 64,
  76         .upper_margin   = 32,
  77         .lower_margin   = 32,
  78         .hsync_len      = 64,
  79         .vsync_len      = 2,
  80         .vmode          = FB_VMODE_NONINTERLACED
  81 };
  82
  83 static struct fb_var_screeninfo sgivwfb_var1600sw __initdata = {
  84         /* 1600x1024, 8 bpp */
  85         .xres           = 1600,
  86         .yres           = 1024,
  87         .xres_virtual   = 1600,
  88         .yres_virtual   = 1024,
  89         .bits_per_pixel = 8,
  90         .red            = { 0, 8, 0 },
  91         .green          = { 0, 8, 0 },
  92         .blue           = { 0, 8, 0 },
  93         .height         = -1,
  94         .width          = -1,
  95         .pixclock       = 9353,
  96         .left_margin    = 20,
  97         .right_margin   = 30,
  98         .upper_margin   = 37,
  99         .lower_margin   = 3,
 100         .hsync_len      = 20,
 101         .vsync_len      = 3,
 102         .vmode          = FB_VMODE_NONINTERLACED
 103 };
 104
 105 /*
 106  *  Interface used by the world
 107  */
 108 int sgivwfb_init(void);
 109
 110 static int sgivwfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
 111 static int sgivwfb_set_par(struct fb_info *info);
 112 static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
 113                              u_int blue, u_int transp,
 114                              struct fb_info *info);
 115 static int sgivwfb_mmap(struct fb_info *info,
 116                         struct vm_area_struct *vma);
 117
 118 static struct fb_ops sgivwfb_ops = {
 119         .owner          = THIS_MODULE,
 120         .fb_check_var   = sgivwfb_check_var,
 121         .fb_set_par     = sgivwfb_set_par,
 122         .fb_setcolreg   = sgivwfb_setcolreg,
 123         .fb_fillrect    = cfb_fillrect,
 124         .fb_copyarea    = cfb_copyarea,
 125         .fb_imageblit   = cfb_imageblit,
 126         .fb_mmap        = sgivwfb_mmap,
 127 };
 128
 129 /*
 130  *  Internal routines
 131  */
 132 static unsigned long bytes_per_pixel(int bpp)
 133 {
 134         switch (bpp) {
 135                 case 8:
 136                         return 1;
 137                 case 16:
 138                         return 2;
 139                 case 32:
 140                         return 4;
 141                 default:
 142                         printk(KERN_INFO "sgivwfb: unsupported bpp %d\n", bpp);
 143                         return 0;
 144         }
 145 }
 146
 147 static unsigned long get_line_length(int xres_virtual, int bpp)
 148 {
 149         return (xres_virtual * bytes_per_pixel(bpp));
 150 }
 151
 152 /*
 153  * Function:    dbe_TurnOffDma
 154  * Parameters:  (None)
 155  * Description: This should turn off the monitor and dbe.  This is used
 156  *              when switching between the serial console and the graphics
 157  *              console.
 158  */
 159
 160 static void dbe_TurnOffDma(struct sgivw_par *par)
 161 {
 162         unsigned int readVal;
 163         int i;
 164
 165         // Check to see if things are already turned off:
 166         // 1) Check to see if dbe is not using the internal dotclock.
 167         // 2) Check to see if the xy counter in dbe is already off.
 168
 169         DBE_GETREG(ctrlstat, readVal);
 170         if (GET_DBE_FIELD(CTRLSTAT, PCLKSEL, readVal) < 2)
 171                 return;
 172
 173         DBE_GETREG(vt_xy, readVal);
 174         if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1)
 175                 return;
 176
 177         // Otherwise, turn off dbe
 178
 179         DBE_GETREG(ovr_control, readVal);
 180         SET_DBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, readVal, 0);
 181         DBE_SETREG(ovr_control, readVal);
 182         udelay(1000);
 183         DBE_GETREG(frm_control, readVal);
 184         SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, readVal, 0);
 185         DBE_SETREG(frm_control, readVal);
 186         udelay(1000);
 187         DBE_GETREG(did_control, readVal);
 188         SET_DBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, readVal, 0);
 189         DBE_SETREG(did_control, readVal);
 190         udelay(1000);
 191
 192         // XXX HACK:
 193         //
 194         //    This was necessary for GBE--we had to wait through two
 195         //    vertical retrace periods before the pixel DMA was
 196         //    turned off for sure.  I've left this in for now, in
 197         //    case dbe needs it.
 198
 199         for (i = 0; i < 10000; i++) {
 200                 DBE_GETREG(frm_inhwctrl, readVal);
 201                 if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) ==
 202                     0)
 203                         udelay(10);
 204                 else {
 205                         DBE_GETREG(ovr_inhwctrl, readVal);
 206                         if (GET_DBE_FIELD
 207                             (OVR_INHWCTRL, OVR_DMA_ENABLE, readVal) == 0)
 208                                 udelay(10);
 209                         else {
 210                                 DBE_GETREG(did_inhwctrl, readVal);
 211                                 if (GET_DBE_FIELD
 212                                     (DID_INHWCTRL, DID_DMA_ENABLE,
 213                                      readVal) == 0)
 214                                         udelay(10);
 215                                 else
 216                                         break;
 217                         }
 218                 }
 219         }
 220 }
 221
 222 /*
 223  *  Set the User Defined Part of the Display. Again if par use it to get
 224  *  real video mode.
 225  */
 226 static int sgivwfb_check_var(struct fb_var_screeninfo *var,
 227                              struct fb_info *info)
 228 {
 229         struct sgivw_par *par = (struct sgivw_par *)info->par;
 230         struct dbe_timing_info *timing;
 231         u_long line_length;
 232         u_long min_mode;
 233         int req_dot;
 234         int test_mode;
 235
 236         /*
 237          *  FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
 238          *  as FB_VMODE_SMOOTH_XPAN is only used internally
 239          */
 240
 241         if (var->vmode & FB_VMODE_CONUPDATE) {
 242                 var->vmode |= FB_VMODE_YWRAP;
 243                 var->xoffset = info->var.xoffset;
 244                 var->yoffset = info->var.yoffset;
 245         }
 246
 247         /* XXX FIXME - forcing var's */
 248         var->xoffset = 0;
 249         var->yoffset = 0;
 250
 251         /* Limit bpp to 8, 16, and 32 */
 252         if (var->bits_per_pixel <= 8)
 253                 var->bits_per_pixel = 8;
 254         else if (var->bits_per_pixel <= 16)
 255                 var->bits_per_pixel = 16;
 256         else if (var->bits_per_pixel <= 32)
 257                 var->bits_per_pixel = 32;
 258         else
 259                 return -EINVAL;
 260
 261         var->grayscale = 0;     /* No grayscale for now */
 262
 263         /* determine valid resolution and timing */
 264         for (min_mode = 0; min_mode < DBE_VT_SIZE; min_mode++) {
 265                 if (dbeVTimings[min_mode].width >= var->xres &&
 266                     dbeVTimings[min_mode].height >= var->yres)
 267                         break;
 268         }
 269
 270         if (min_mode == DBE_VT_SIZE)
 271                 return -EINVAL; /* Resolution to high */
 272
 273         /* XXX FIXME - should try to pick best refresh rate */
 274         /* for now, pick closest dot-clock within 3MHz */
 275         req_dot = PICOS2KHZ(var->pixclock);
 276         printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n",
 277                var->pixclock, req_dot);
 278         test_mode = min_mode;
 279         while (dbeVTimings[min_mode].width == dbeVTimings[test_mode].width) {
 280                 if (dbeVTimings[test_mode].cfreq + 3000 > req_dot)
 281                         break;
 282                 test_mode++;
 283         }
 284         if (dbeVTimings[min_mode].width != dbeVTimings[test_mode].width)
 285                 test_mode--;
 286         min_mode = test_mode;
 287         timing = &dbeVTimings[min_mode];
 288         printk(KERN_INFO "sgivwfb: granted dot-clock=%d KHz\n", timing->cfreq);
 289
 290         /* Adjust virtual resolution, if necessary */
 291         if (var->xres > var->xres_virtual || (!ywrap && !ypan))
 292                 var->xres_virtual = var->xres;
 293         if (var->yres > var->yres_virtual || (!ywrap && !ypan))
 294                 var->yres_virtual = var->yres;
 295
 296         /*
 297          *  Memory limit
 298          */
 299         line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
 300         if (line_length * var->yres_virtual > sgivwfb_mem_size)
 301                 return -ENOMEM; /* Virtual resolution to high */
 302
 303         info->fix.line_length = line_length;
 304
 305         switch (var->bits_per_pixel) {
 306         case 8:
 307                 var->red.offset = 0;
 308                 var->red.length = 8;
 309                 var->green.offset = 0;
 310                 var->green.length = 8;
 311                 var->blue.offset = 0;
 312                 var->blue.length = 8;
 313                 var->transp.offset = 0;
 314                 var->transp.length = 0;
 315                 break;
 316         case 16:                /* RGBA 5551 */
 317                 var->red.offset = 11;
 318                 var->red.length = 5;
 319                 var->green.offset = 6;
 320                 var->green.length = 5;
 321                 var->blue.offset = 1;
 322                 var->blue.length = 5;
 323                 var->transp.offset = 0;
 324                 var->transp.length = 0;
 325                 break;
 326         case 32:                /* RGB 8888 */
 327                 var->red.offset = 0;
 328                 var->red.length = 8;
 329                 var->green.offset = 8;
 330                 var->green.length = 8;
 331                 var->blue.offset = 16;
 332                 var->blue.length = 8;
 333                 var->transp.offset = 24;
 334                 var->transp.length = 8;
 335                 break;
 336         }
 337         var->red.msb_right = 0;
 338         var->green.msb_right = 0;
 339         var->blue.msb_right = 0;
 340         var->transp.msb_right = 0;
 341
 342         /* set video timing information */
 343         var->pixclock = KHZ2PICOS(timing->cfreq);
 344         var->left_margin = timing->htotal - timing->hsync_end;
 345         var->right_margin = timing->hsync_start - timing->width;
 346         var->upper_margin = timing->vtotal - timing->vsync_end;
 347         var->lower_margin = timing->vsync_start - timing->height;
 348         var->hsync_len = timing->hsync_end - timing->hsync_start;
 349         var->vsync_len = timing->vsync_end - timing->vsync_start;
 350
 351         /* Ouch. This breaks the rules but timing_num is only important if you
 352         * change a video mode */
 353         par->timing_num = min_mode;
 354
 355         printk(KERN_INFO "sgivwfb: new video mode xres=%d yres=%d bpp=%d\n",
 356                 var->xres, var->yres, var->bits_per_pixel);
 357         printk(KERN_INFO "         vxres=%d vyres=%d\n", var->xres_virtual,
 358                 var->yres_virtual);
 359         return 0;
 360 }
 361
 362 /*
 363  *  Setup flatpanel related registers.
 364  */
 365 static void sgivwfb_setup_flatpanel(struct sgivw_par *par, struct dbe_timing_info *currentTiming)
 366 {
 367         int fp_wid, fp_hgt, fp_vbs, fp_vbe;
 368         u32 outputVal = 0;
 369
 370         SET_DBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal,
 371                 (currentTiming->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
 372         SET_DBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal,
 373                 (currentTiming->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
 374         DBE_SETREG(vt_flags, outputVal);
 375
 376         /* Turn on the flat panel */
 377         switch (flatpanel_id) {
 378                 case FLATPANEL_SGI_1600SW:
 379                         fp_wid = 1600;
 380                         fp_hgt = 1024;
 381                         fp_vbs = 0;
 382                         fp_vbe = 1600;
 383                         currentTiming->pll_m = 4;
 384                         currentTiming->pll_n = 1;
 385                         currentTiming->pll_p = 0;
 386                         break;
 387                 default:
 388                         fp_wid = fp_hgt = fp_vbs = fp_vbe = 0xfff;
 389         }
 390
 391         outputVal = 0;
 392         SET_DBE_FIELD(FP_DE, FP_DE_ON, outputVal, fp_vbs);
 393         SET_DBE_FIELD(FP_DE, FP_DE_OFF, outputVal, fp_vbe);
 394         DBE_SETREG(fp_de, outputVal);
 395         outputVal = 0;
 396         SET_DBE_FIELD(FP_HDRV, FP_HDRV_OFF, outputVal, fp_wid);
 397         DBE_SETREG(fp_hdrv, outputVal);
 398         outputVal = 0;
 399         SET_DBE_FIELD(FP_VDRV, FP_VDRV_ON, outputVal, 1);
 400         SET_DBE_FIELD(FP_VDRV, FP_VDRV_OFF, outputVal, fp_hgt + 1);
 401         DBE_SETREG(fp_vdrv, outputVal);
 402 }
 403
 404 /*
 405  *  Set the hardware according to 'par'.
 406  */
 407 static int sgivwfb_set_par(struct fb_info *info)
 408 {
 409         struct sgivw_par *par = info->par;
 410         int i, j, htmp, temp;
 411         u32 readVal, outputVal;
 412         int wholeTilesX, maxPixelsPerTileX;
 413         int frmWrite1, frmWrite2, frmWrite3b;
 414         struct dbe_timing_info *currentTiming; /* Current Video Timing */
 415         int xpmax, ypmax;       // Monitor resolution
 416         int bytesPerPixel;      // Bytes per pixel
 417
 418         currentTiming = &dbeVTimings[par->timing_num];
 419         bytesPerPixel = bytes_per_pixel(info->var.bits_per_pixel);
 420         xpmax = currentTiming->width;
 421         ypmax = currentTiming->height;
 422
 423         /* dbe_InitGraphicsBase(); */
 424         /* Turn on dotclock PLL */
 425         DBE_SETREG(ctrlstat, 0x20000000);
 426
 427         dbe_TurnOffDma(par);
 428
 429         /* dbe_CalculateScreenParams(); */
 430         maxPixelsPerTileX = 512 / bytesPerPixel;
 431         wholeTilesX = xpmax / maxPixelsPerTileX;
 432         if (wholeTilesX * maxPixelsPerTileX < xpmax)
 433                 wholeTilesX++;
 434
 435         printk(KERN_DEBUG "sgivwfb: pixPerTile=%d wholeTilesX=%d\n",
 436                maxPixelsPerTileX, wholeTilesX);
 437
 438         /* dbe_InitGammaMap(); */
 439         udelay(10);
 440
 441         for (i = 0; i < 256; i++) {
 442                 DBE_ISETREG(gmap, i, (i << 24) | (i << 16) | (i << 8));
 443         }
 444
 445         /* dbe_TurnOn(); */
 446         DBE_GETREG(vt_xy, readVal);
 447         if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) {
 448                 DBE_SETREG(vt_xy, 0x00000000);
 449                 udelay(1);
 450         } else
 451                 dbe_TurnOffDma(par);
 452
 453         /* dbe_Initdbe(); */
 454         for (i = 0; i < 256; i++) {
 455                 for (j = 0; j < 100; j++) {
 456                         DBE_GETREG(cm_fifo, readVal);
 457                         if (readVal != 0x00000000)
 458                                 break;
 459                         else
 460                                 udelay(10);
 461                 }
 462
 463                 // DBE_ISETREG(cmap, i, 0x00000000);
 464                 DBE_ISETREG(cmap, i, (i << 8) | (i << 16) | (i << 24));
 465         }
 466
 467         /* dbe_InitFramebuffer(); */
 468         frmWrite1 = 0;
 469         SET_DBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, frmWrite1,
 470                       wholeTilesX);
 471         SET_DBE_FIELD(FRM_SIZE_TILE, FRM_RHS, frmWrite1, 0);
 472
 473         switch (bytesPerPixel) {
 474         case 1:
 475                 SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
 476                               DBE_FRM_DEPTH_8);
 477                 break;
 478         case 2:
 479                 SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
 480                               DBE_FRM_DEPTH_16);
 481                 break;
 482         case 4:
 483                 SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
 484                               DBE_FRM_DEPTH_32);
 485                 break;
 486         }
 487
 488         frmWrite2 = 0;
 489         SET_DBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, frmWrite2, ypmax);
 490
 491         // Tell dbe about the framebuffer location and type
 492         // XXX What format is the FRM_TILE_PTR??  64K aligned address?
 493         frmWrite3b = 0;
 494         SET_DBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, frmWrite3b,
 495                       sgivwfb_mem_phys >> 9);
 496         SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, frmWrite3b, 1);
 497         SET_DBE_FIELD(FRM_CONTROL, FRM_LINEAR, frmWrite3b, 1);
 498
 499         /* Initialize DIDs */
 500
 501         outputVal = 0;
 502         switch (bytesPerPixel) {
 503         case 1:
 504                 SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_I8);
 505                 break;
 506         case 2:
 507                 SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGBA5);
 508                 break;
 509         case 4:
 510                 SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGB8);
 511                 break;
 512         }
 513         SET_DBE_FIELD(WID, BUF, outputVal, DBE_BMODE_BOTH);
 514
 515         for (i = 0; i < 32; i++) {
 516                 DBE_ISETREG(mode_regs, i, outputVal);
 517         }
 518
 519         /* dbe_InitTiming(); */
 520         DBE_SETREG(vt_intr01, 0xffffffff);
 521         DBE_SETREG(vt_intr23, 0xffffffff);
 522
 523         DBE_GETREG(dotclock, readVal);
 524         DBE_SETREG(dotclock, readVal & 0xffff);
 525
 526         DBE_SETREG(vt_xymax, 0x00000000);
 527         outputVal = 0;
 528         SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_ON, outputVal,
 529                       currentTiming->vsync_start);
 530         SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_OFF, outputVal,
 531                       currentTiming->vsync_end);
 532         DBE_SETREG(vt_vsync, outputVal);
 533         outputVal = 0;
 534         SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_ON, outputVal,
 535                       currentTiming->hsync_start);
 536         SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_OFF, outputVal,
 537                       currentTiming->hsync_end);
 538         DBE_SETREG(vt_hsync, outputVal);
 539         outputVal = 0;
 540         SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_ON, outputVal,
 541                       currentTiming->vblank_start);
 542         SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_OFF, outputVal,
 543                       currentTiming->vblank_end);
 544         DBE_SETREG(vt_vblank, outputVal);
 545         outputVal = 0;
 546         SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_ON, outputVal,
 547                       currentTiming->hblank_start);
 548         SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_OFF, outputVal,
 549                       currentTiming->hblank_end - 3);
 550         DBE_SETREG(vt_hblank, outputVal);
 551         outputVal = 0;
 552         SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_ON, outputVal,
 553                       currentTiming->vblank_start);
 554         SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_OFF, outputVal,
 555                       currentTiming->vblank_end);
 556         DBE_SETREG(vt_vcmap, outputVal);
 557         outputVal = 0;
 558         SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_ON, outputVal,
 559                       currentTiming->hblank_start);
 560         SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_OFF, outputVal,
 561                       currentTiming->hblank_end - 3);
 562         DBE_SETREG(vt_hcmap, outputVal);
 563
 564         if (flatpanel_id != -1)
 565                 sgivwfb_setup_flatpanel(par, currentTiming);
 566
 567         outputVal = 0;
 568         temp = currentTiming->vblank_start - currentTiming->vblank_end - 1;
 569         if (temp > 0)
 570                 temp = -temp;
 571
 572         SET_DBE_FIELD(DID_START_XY, DID_STARTY, outputVal, (u32) temp);
 573         if (currentTiming->hblank_end >= 20)
 574                 SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
 575                               currentTiming->hblank_end - 20);
 576         else
 577                 SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
 578                               currentTiming->htotal - (20 -
 579                                                        currentTiming->
 580                                                        hblank_end));
 581         DBE_SETREG(did_start_xy, outputVal);
 582
 583         outputVal = 0;
 584         SET_DBE_FIELD(CRS_START_XY, CRS_STARTY, outputVal,
 585                       (u32) (temp + 1));
 586         if (currentTiming->hblank_end >= DBE_CRS_MAGIC)
 587                 SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
 588                               currentTiming->hblank_end - DBE_CRS_MAGIC);
 589         else
 590                 SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
 591                               currentTiming->htotal - (DBE_CRS_MAGIC -
 592                                                        currentTiming->
 593                                                        hblank_end));
 594         DBE_SETREG(crs_start_xy, outputVal);
 595
 596         outputVal = 0;
 597         SET_DBE_FIELD(VC_START_XY, VC_STARTY, outputVal, (u32) temp);
 598         SET_DBE_FIELD(VC_START_XY, VC_STARTX, outputVal,
 599                       currentTiming->hblank_end - 4);
 600         DBE_SETREG(vc_start_xy, outputVal);
 601
 602         DBE_SETREG(frm_size_tile, frmWrite1);
 603         DBE_SETREG(frm_size_pixel, frmWrite2);
 604
 605         outputVal = 0;
 606         SET_DBE_FIELD(DOTCLK, M, outputVal, currentTiming->pll_m - 1);
 607         SET_DBE_FIELD(DOTCLK, N, outputVal, currentTiming->pll_n - 1);
 608         SET_DBE_FIELD(DOTCLK, P, outputVal, currentTiming->pll_p);
 609         SET_DBE_FIELD(DOTCLK, RUN, outputVal, 1);
 610         DBE_SETREG(dotclock, outputVal);
 611
 612         udelay(11 * 1000);
 613
 614         DBE_SETREG(vt_vpixen, 0xffffff);
 615         DBE_SETREG(vt_hpixen, 0xffffff);
 616
 617         outputVal = 0;
 618         SET_DBE_FIELD(VT_XYMAX, VT_MAXX, outputVal, currentTiming->htotal);
 619         SET_DBE_FIELD(VT_XYMAX, VT_MAXY, outputVal, currentTiming->vtotal);
 620         DBE_SETREG(vt_xymax, outputVal);
 621
 622         outputVal = frmWrite1;
 623         SET_DBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, outputVal, 1);
 624         DBE_SETREG(frm_size_tile, outputVal);
 625         DBE_SETREG(frm_size_tile, frmWrite1);
 626
 627         outputVal = 0;
 628         SET_DBE_FIELD(OVR_WIDTH_TILE, OVR_FIFO_RESET, outputVal, 1);
 629         DBE_SETREG(ovr_width_tile, outputVal);
 630         DBE_SETREG(ovr_width_tile, 0);
 631
 632         DBE_SETREG(frm_control, frmWrite3b);
 633         DBE_SETREG(did_control, 0);
 634
 635         // Wait for dbe to take frame settings
 636         for (i = 0; i < 100000; i++) {
 637                 DBE_GETREG(frm_inhwctrl, readVal);
 638                 if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) !=
 639                     0)
 640                         break;
 641                 else
 642                         udelay(1);
 643         }
 644
 645         if (i == 100000)
 646                 printk(KERN_INFO
 647                        "sgivwfb: timeout waiting for frame DMA enable.\n");
 648
 649         outputVal = 0;
 650         htmp = currentTiming->hblank_end - 19;
 651         if (htmp < 0)
 652                 htmp += currentTiming->htotal;  /* allow blank to wrap around */
 653         SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_ON, outputVal, htmp);
 654         SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_OFF, outputVal,
 655                       ((htmp + currentTiming->width -
 656                         2) % currentTiming->htotal));
 657         DBE_SETREG(vt_hpixen, outputVal);
 658
 659         outputVal = 0;
 660         SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_OFF, outputVal,
 661                       currentTiming->vblank_start);
 662         SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_ON, outputVal,
 663                       currentTiming->vblank_end);
 664         DBE_SETREG(vt_vpixen, outputVal);
 665
 666         // Turn off mouse cursor
 667         par->regs->crs_ctl = 0;
 668
 669         // XXX What's this section for??
 670         DBE_GETREG(ctrlstat, readVal);
 671         readVal &= 0x02000000;
 672
 673         if (readVal != 0) {
 674                 DBE_SETREG(ctrlstat, 0x30000000);
 675         }
 676         return 0;
 677 }
 678
 679 /*
 680  *  Set a single color register. The values supplied are already
 681  *  rounded down to the hardware's capabilities (according to the
 682  *  entries in the var structure). Return != 0 for invalid regno.
 683  */
 684
 685 static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
 686                              u_int blue, u_int transp,
 687                              struct fb_info *info)
 688 {
 689         struct sgivw_par *par = (struct sgivw_par *) info->par;
 690
 691         if (regno > 255)
 692                 return 1;
 693         red >>= 8;
 694         green >>= 8;
 695         blue >>= 8;
 696
 697         /* wait for the color map FIFO to have a free entry */
 698         while (par->cmap_fifo == 0)
 699                 par->cmap_fifo = par->regs->cm_fifo;
 700
 701         par->regs->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
 702         par->cmap_fifo--;       /* assume FIFO is filling up */
 703         return 0;
 704 }
 705
 706 static int sgivwfb_mmap(struct fb_info *info,
 707                         struct vm_area_struct *vma)
 708 {
 709         unsigned long size = vma->vm_end - vma->vm_start;
 710         unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
 711
 712         if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
 713                 return -EINVAL;
 714         if (offset + size > sgivwfb_mem_size)
 715                 return -EINVAL;
 716         offset += sgivwfb_mem_phys;
 717         pgprot_val(vma->vm_page_prot) =
 718             pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
 719         vma->vm_flags |= VM_IO;
 720         if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
 721                                                 size, vma->vm_page_prot))
 722                 return -EAGAIN;
 723         printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n",
 724                offset, vma->vm_start);
 725         return 0;
 726 }
 727
 728 int __init sgivwfb_setup(char *options)
 729 {
 730         char *this_opt;
 731
 732         if (!options || !*options)
 733                 return 0;
 734
 735         while ((this_opt = strsep(&options, ",")) != NULL) {
 736                 if (!strncmp(this_opt, "monitor:", 8)) {
 737                         if (!strncmp(this_opt + 8, "crt", 3))
 738                                 flatpanel_id = -1;
 739                         else if (!strncmp(this_opt + 8, "1600sw", 6))
 740                                 flatpanel_id = FLATPANEL_SGI_1600SW;
 741                 }
 742         }
 743         return 0;
 744 }
 745
 746 /*
 747  *  Initialisation
 748  */
 749 static int __init sgivwfb_probe(struct platform_device *dev)
 750 {
 751         struct sgivw_par *par;
 752         struct fb_info *info;
 753         char *monitor;
 754
 755         info = framebuffer_alloc(sizeof(struct sgivw_par) + sizeof(u32) * 256, &dev->dev);
 756         if (!info)
 757                 return -ENOMEM;
 758         par = info->par;
 759
 760         if (!request_mem_region(DBE_REG_PHYS, DBE_REG_SIZE, "sgivwfb")) {
 761                 printk(KERN_ERR "sgivwfb: couldn't reserve mmio region\n");
 762                 framebuffer_release(info);
 763                 return -EBUSY;
 764         }
 765
 766         par->regs = (struct asregs *) ioremap_nocache(DBE_REG_PHYS, DBE_REG_SIZE);
 767         if (!par->regs) {
 768                 printk(KERN_ERR "sgivwfb: couldn't ioremap registers\n");
 769                 goto fail_ioremap_regs;
 770         }
 771
 772         mtrr_add(sgivwfb_mem_phys, sgivwfb_mem_size, MTRR_TYPE_WRCOMB, 1);
 773
 774         sgivwfb_fix.smem_start = sgivwfb_mem_phys;
 775         sgivwfb_fix.smem_len = sgivwfb_mem_size;
 776         sgivwfb_fix.ywrapstep = ywrap;
 777         sgivwfb_fix.ypanstep = ypan;
 778
 779         info->fix = sgivwfb_fix;
 780
 781         switch (flatpanel_id) {
 782                 case FLATPANEL_SGI_1600SW:
 783                         info->var = sgivwfb_var1600sw;
 784                         monitor = "SGI 1600SW flatpanel";
 785                         break;
 786                 default:
 787                         info->var = sgivwfb_var;
 788                         monitor = "CRT";
 789         }
 790
 791         printk(KERN_INFO "sgivwfb: %s monitor selected\n", monitor);
 792
 793         info->fbops = &sgivwfb_ops;
 794         info->pseudo_palette = (void *) (par + 1);
 795         info->flags = FBINFO_DEFAULT;
 796
 797         info->screen_base = ioremap_nocache((unsigned long) sgivwfb_mem_phys, sgivwfb_mem_size);
 798         if (!info->screen_base) {
 799                 printk(KERN_ERR "sgivwfb: couldn't ioremap screen_base\n");
 800                 goto fail_ioremap_fbmem;
 801         }
 802
 803         if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
 804                 goto fail_color_map;
 805
 806         if (register_framebuffer(info) < 0) {
 807                 printk(KERN_ERR "sgivwfb: couldn't register framebuffer\n");
 808                 goto fail_register_framebuffer;
 809         }
 810
 811         platform_set_drvdata(dev, info);
 812
 813         printk(KERN_INFO "fb%d: SGI DBE frame buffer device, using %ldK of video memory at %#lx\n",
 814                 info->node, sgivwfb_mem_size >> 10, sgivwfb_mem_phys);
 815         return 0;
 816
 817 fail_register_framebuffer:
 818         fb_dealloc_cmap(&info->cmap);
 819 fail_color_map:
 820         iounmap((char *) info->screen_base);
 821 fail_ioremap_fbmem:
 822         iounmap(par->regs);
 823 fail_ioremap_regs:
 824         release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
 825         framebuffer_release(info);
 826         return -ENXIO;
 827 }
 828
 829 static int sgivwfb_remove(struct platform_device *dev)
 830 {
 831         struct fb_info *info = platform_get_drvdata(dev);
 832
 833         if (info) {
 834                 struct sgivw_par *par = info->par;
 835
 836                 unregister_framebuffer(info);
 837                 dbe_TurnOffDma(par);
 838                 iounmap(par->regs);
 839                 iounmap(info->screen_base);
 840                 release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
 841         }
 842         return 0;
 843 }
 844
 845 static struct platform_driver sgivwfb_driver = {
 846         .probe  = sgivwfb_probe,
 847         .remove = sgivwfb_remove,
 848         .driver = {
 849                 .name   = "sgivwfb",
 850         },
 851 };
 852
 853 static struct platform_device *sgivwfb_device;
 854
 855 int __init sgivwfb_init(void)
 856 {
 857         int ret;
 858
 859 #ifndef MODULE
 860         char *option = NULL;
 861
 862         if (fb_get_options("sgivwfb", &option))
 863                 return -ENODEV;
 864         sgivwfb_setup(option);
 865 #endif
 866         ret = platform_driver_register(&sgivwfb_driver);
 867         if (!ret) {
 868                 sgivwfb_device = platform_device_alloc("sgivwfb", 0);
 869                 if (sgivwfb_device) {
 870                         ret = platform_device_add(sgivwfb_device);
 871                 } else
 872                         ret = -ENOMEM;
 873                 if (ret) {
 874                         platform_driver_unregister(&sgivwfb_driver);
 875                         platform_device_put(sgivwfb_device);
 876                 }
 877         }
 878         return ret;
 879 }
 880
 881 module_init(sgivwfb_init);
 882
 883 #ifdef MODULE
 884 MODULE_LICENSE("GPL");
 885
 886 static void __exit sgivwfb_exit(void)
 887 {
 888         platform_device_unregister(sgivwfb_device);
 889         platform_driver_unregister(&sgivwfb_driver);
 890 }
 891
 892 module_exit(sgivwfb_exit);
 893
 894 #endif                          /* MODULE */