git.oblomov.eu Git - linux-2.6/blob - drivers/net/s2io.c

   1 /************************************************************************
   2  * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
   3  * Copyright(c) 2002-2007 Neterion Inc.
   4
   5  * This software may be used and distributed according to the terms of
   6  * the GNU General Public License (GPL), incorporated herein by reference.
   7  * Drivers based on or derived from this code fall under the GPL and must
   8  * retain the authorship, copyright and license notice.  This file is not
   9  * a complete program and may only be used when the entire operating
  10  * system is licensed under the GPL.
  11  * See the file COPYING in this distribution for more information.
  12  *
  13  * Credits:
  14  * Jeff Garzik          : For pointing out the improper error condition
  15  *                        check in the s2io_xmit routine and also some
  16  *                        issues in the Tx watch dog function. Also for
  17  *                        patiently answering all those innumerable
  18  *                        questions regaring the 2.6 porting issues.
  19  * Stephen Hemminger    : Providing proper 2.6 porting mechanism for some
  20  *                        macros available only in 2.6 Kernel.
  21  * Francois Romieu      : For pointing out all code part that were
  22  *                        deprecated and also styling related comments.
  23  * Grant Grundler       : For helping me get rid of some Architecture
  24  *                        dependent code.
  25  * Christopher Hellwig  : Some more 2.6 specific issues in the driver.
  26  *
  27  * The module loadable parameters that are supported by the driver and a brief
  28  * explaination of all the variables.
  29  *
  30  * rx_ring_num : This can be used to program the number of receive rings used
  31  * in the driver.
  32  * rx_ring_sz: This defines the number of receive blocks each ring can have.
  33  *     This is also an array of size 8.
  34  * rx_ring_mode: This defines the operation mode of all 8 rings. The valid
  35  *              values are 1, 2.
  36  * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
  37  * tx_fifo_len: This too is an array of 8. Each element defines the number of
  38  * Tx descriptors that can be associated with each corresponding FIFO.
  39  * intr_type: This defines the type of interrupt. The values can be 0(INTA),
  40  *     2(MSI_X). Default value is '2(MSI_X)'
  41  * lro_enable: Specifies whether to enable Large Receive Offload (LRO) or not.
  42  *     Possible values '1' for enable '0' for disable. Default is '0'
  43  * lro_max_pkts: This parameter defines maximum number of packets can be
  44  *     aggregated as a single large packet
  45  * napi: This parameter used to enable/disable NAPI (polling Rx)
  46  *     Possible values '1' for enable and '0' for disable. Default is '1'
  47  * ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO)
  48  *      Possible values '1' for enable and '0' for disable. Default is '0'
  49  * vlan_tag_strip: This can be used to enable or disable vlan stripping.
  50  *                 Possible values '1' for enable , '0' for disable.
  51  *                 Default is '2' - which means disable in promisc mode
  52  *                 and enable in non-promiscuous mode.
  53  * multiq: This parameter used to enable/disable MULTIQUEUE support.
  54  *      Possible values '1' for enable and '0' for disable. Default is '0'
  55  ************************************************************************/
  56
  57 #include <linux/module.h>
  58 #include <linux/types.h>
  59 #include <linux/errno.h>
  60 #include <linux/ioport.h>
  61 #include <linux/pci.h>
  62 #include <linux/dma-mapping.h>
  63 #include <linux/kernel.h>
  64 #include <linux/netdevice.h>
  65 #include <linux/etherdevice.h>
  66 #include <linux/skbuff.h>
  67 #include <linux/init.h>
  68 #include <linux/delay.h>
  69 #include <linux/stddef.h>
  70 #include <linux/ioctl.h>
  71 #include <linux/timex.h>
  72 #include <linux/ethtool.h>
  73 #include <linux/workqueue.h>
  74 #include <linux/if_vlan.h>
  75 #include <linux/ip.h>
  76 #include <linux/tcp.h>
  77 #include <net/tcp.h>
  78
  79 #include <asm/system.h>
  80 #include <asm/uaccess.h>
  81 #include <asm/io.h>
  82 #include <asm/div64.h>
  83 #include <asm/irq.h>
  84
  85 /* local include */
  86 #include "s2io.h"
  87 #include "s2io-regs.h"
  88
  89 #define DRV_VERSION "2.0.26.25"
  90
  91 /* S2io Driver name & version. */
  92 static char s2io_driver_name[] = "Neterion";
  93 static char s2io_driver_version[] = DRV_VERSION;
  94
  95 static int rxd_size[2] = {32,48};
  96 static int rxd_count[2] = {127,85};
  97
  98 static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
  99 {
 100         int ret;
 101
 102         ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
 103                 (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
 104
 105         return ret;
 106 }
 107
 108 /*
 109  * Cards with following subsystem_id have a link state indication
 110  * problem, 600B, 600C, 600D, 640B, 640C and 640D.
 111  * macro below identifies these cards given the subsystem_id.
 112  */
 113 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
 114         (dev_type == XFRAME_I_DEVICE) ?                 \
 115                 ((((subid >= 0x600B) && (subid <= 0x600D)) || \
 116                  ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
 117
 118 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
 119                                       ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
 120
 121 static inline int is_s2io_card_up(const struct s2io_nic * sp)
 122 {
 123         return test_bit(__S2IO_STATE_CARD_UP, &sp->state);
 124 }
 125
 126 /* Ethtool related variables and Macros. */
 127 static char s2io_gstrings[][ETH_GSTRING_LEN] = {
 128         "Register test\t(offline)",
 129         "Eeprom test\t(offline)",
 130         "Link test\t(online)",
 131         "RLDRAM test\t(offline)",
 132         "BIST Test\t(offline)"
 133 };
 134
 135 static char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = {
 136         {"tmac_frms"},
 137         {"tmac_data_octets"},
 138         {"tmac_drop_frms"},
 139         {"tmac_mcst_frms"},
 140         {"tmac_bcst_frms"},
 141         {"tmac_pause_ctrl_frms"},
 142         {"tmac_ttl_octets"},
 143         {"tmac_ucst_frms"},
 144         {"tmac_nucst_frms"},
 145         {"tmac_any_err_frms"},
 146         {"tmac_ttl_less_fb_octets"},
 147         {"tmac_vld_ip_octets"},
 148         {"tmac_vld_ip"},
 149         {"tmac_drop_ip"},
 150         {"tmac_icmp"},
 151         {"tmac_rst_tcp"},
 152         {"tmac_tcp"},
 153         {"tmac_udp"},
 154         {"rmac_vld_frms"},
 155         {"rmac_data_octets"},
 156         {"rmac_fcs_err_frms"},
 157         {"rmac_drop_frms"},
 158         {"rmac_vld_mcst_frms"},
 159         {"rmac_vld_bcst_frms"},
 160         {"rmac_in_rng_len_err_frms"},
 161         {"rmac_out_rng_len_err_frms"},
 162         {"rmac_long_frms"},
 163         {"rmac_pause_ctrl_frms"},
 164         {"rmac_unsup_ctrl_frms"},
 165         {"rmac_ttl_octets"},
 166         {"rmac_accepted_ucst_frms"},
 167         {"rmac_accepted_nucst_frms"},
 168         {"rmac_discarded_frms"},
 169         {"rmac_drop_events"},
 170         {"rmac_ttl_less_fb_octets"},
 171         {"rmac_ttl_frms"},
 172         {"rmac_usized_frms"},
 173         {"rmac_osized_frms"},
 174         {"rmac_frag_frms"},
 175         {"rmac_jabber_frms"},
 176         {"rmac_ttl_64_frms"},
 177         {"rmac_ttl_65_127_frms"},
 178         {"rmac_ttl_128_255_frms"},
 179         {"rmac_ttl_256_511_frms"},
 180         {"rmac_ttl_512_1023_frms"},
 181         {"rmac_ttl_1024_1518_frms"},
 182         {"rmac_ip"},
 183         {"rmac_ip_octets"},
 184         {"rmac_hdr_err_ip"},
 185         {"rmac_drop_ip"},
 186         {"rmac_icmp"},
 187         {"rmac_tcp"},
 188         {"rmac_udp"},
 189         {"rmac_err_drp_udp"},
 190         {"rmac_xgmii_err_sym"},
 191         {"rmac_frms_q0"},
 192         {"rmac_frms_q1"},
 193         {"rmac_frms_q2"},
 194         {"rmac_frms_q3"},
 195         {"rmac_frms_q4"},
 196         {"rmac_frms_q5"},
 197         {"rmac_frms_q6"},
 198         {"rmac_frms_q7"},
 199         {"rmac_full_q0"},
 200         {"rmac_full_q1"},
 201         {"rmac_full_q2"},
 202         {"rmac_full_q3"},
 203         {"rmac_full_q4"},
 204         {"rmac_full_q5"},
 205         {"rmac_full_q6"},
 206         {"rmac_full_q7"},
 207         {"rmac_pause_cnt"},
 208         {"rmac_xgmii_data_err_cnt"},
 209         {"rmac_xgmii_ctrl_err_cnt"},
 210         {"rmac_accepted_ip"},
 211         {"rmac_err_tcp"},
 212         {"rd_req_cnt"},
 213         {"new_rd_req_cnt"},
 214         {"new_rd_req_rtry_cnt"},
 215         {"rd_rtry_cnt"},
 216         {"wr_rtry_rd_ack_cnt"},
 217         {"wr_req_cnt"},
 218         {"new_wr_req_cnt"},
 219         {"new_wr_req_rtry_cnt"},
 220         {"wr_rtry_cnt"},
 221         {"wr_disc_cnt"},
 222         {"rd_rtry_wr_ack_cnt"},
 223         {"txp_wr_cnt"},
 224         {"txd_rd_cnt"},
 225         {"txd_wr_cnt"},
 226         {"rxd_rd_cnt"},
 227         {"rxd_wr_cnt"},
 228         {"txf_rd_cnt"},
 229         {"rxf_wr_cnt"}
 230 };
 231
 232 static char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = {
 233         {"rmac_ttl_1519_4095_frms"},
 234         {"rmac_ttl_4096_8191_frms"},
 235         {"rmac_ttl_8192_max_frms"},
 236         {"rmac_ttl_gt_max_frms"},
 237         {"rmac_osized_alt_frms"},
 238         {"rmac_jabber_alt_frms"},
 239         {"rmac_gt_max_alt_frms"},
 240         {"rmac_vlan_frms"},
 241         {"rmac_len_discard"},
 242         {"rmac_fcs_discard"},
 243         {"rmac_pf_discard"},
 244         {"rmac_da_discard"},
 245         {"rmac_red_discard"},
 246         {"rmac_rts_discard"},
 247         {"rmac_ingm_full_discard"},
 248         {"link_fault_cnt"}
 249 };
 250
 251 static char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
 252         {"\n DRIVER STATISTICS"},
 253         {"single_bit_ecc_errs"},
 254         {"double_bit_ecc_errs"},
 255         {"parity_err_cnt"},
 256         {"serious_err_cnt"},
 257         {"soft_reset_cnt"},
 258         {"fifo_full_cnt"},
 259         {"ring_0_full_cnt"},
 260         {"ring_1_full_cnt"},
 261         {"ring_2_full_cnt"},
 262         {"ring_3_full_cnt"},
 263         {"ring_4_full_cnt"},
 264         {"ring_5_full_cnt"},
 265         {"ring_6_full_cnt"},
 266         {"ring_7_full_cnt"},
 267         {"alarm_transceiver_temp_high"},
 268         {"alarm_transceiver_temp_low"},
 269         {"alarm_laser_bias_current_high"},
 270         {"alarm_laser_bias_current_low"},
 271         {"alarm_laser_output_power_high"},
 272         {"alarm_laser_output_power_low"},
 273         {"warn_transceiver_temp_high"},
 274         {"warn_transceiver_temp_low"},
 275         {"warn_laser_bias_current_high"},
 276         {"warn_laser_bias_current_low"},
 277         {"warn_laser_output_power_high"},
 278         {"warn_laser_output_power_low"},
 279         {"lro_aggregated_pkts"},
 280         {"lro_flush_both_count"},
 281         {"lro_out_of_sequence_pkts"},
 282         {"lro_flush_due_to_max_pkts"},
 283         {"lro_avg_aggr_pkts"},
 284         {"mem_alloc_fail_cnt"},
 285         {"pci_map_fail_cnt"},
 286         {"watchdog_timer_cnt"},
 287         {"mem_allocated"},
 288         {"mem_freed"},
 289         {"link_up_cnt"},
 290         {"link_down_cnt"},
 291         {"link_up_time"},
 292         {"link_down_time"},
 293         {"tx_tcode_buf_abort_cnt"},
 294         {"tx_tcode_desc_abort_cnt"},
 295         {"tx_tcode_parity_err_cnt"},
 296         {"tx_tcode_link_loss_cnt"},
 297         {"tx_tcode_list_proc_err_cnt"},
 298         {"rx_tcode_parity_err_cnt"},
 299         {"rx_tcode_abort_cnt"},
 300         {"rx_tcode_parity_abort_cnt"},
 301         {"rx_tcode_rda_fail_cnt"},
 302         {"rx_tcode_unkn_prot_cnt"},
 303         {"rx_tcode_fcs_err_cnt"},
 304         {"rx_tcode_buf_size_err_cnt"},
 305         {"rx_tcode_rxd_corrupt_cnt"},
 306         {"rx_tcode_unkn_err_cnt"},
 307         {"tda_err_cnt"},
 308         {"pfc_err_cnt"},
 309         {"pcc_err_cnt"},
 310         {"tti_err_cnt"},
 311         {"tpa_err_cnt"},
 312         {"sm_err_cnt"},
 313         {"lso_err_cnt"},
 314         {"mac_tmac_err_cnt"},
 315         {"mac_rmac_err_cnt"},
 316         {"xgxs_txgxs_err_cnt"},
 317         {"xgxs_rxgxs_err_cnt"},
 318         {"rc_err_cnt"},
 319         {"prc_pcix_err_cnt"},
 320         {"rpa_err_cnt"},
 321         {"rda_err_cnt"},
 322         {"rti_err_cnt"},
 323         {"mc_err_cnt"}
 324 };
 325
 326 #define S2IO_XENA_STAT_LEN      ARRAY_SIZE(ethtool_xena_stats_keys)
 327 #define S2IO_ENHANCED_STAT_LEN  ARRAY_SIZE(ethtool_enhanced_stats_keys)
 328 #define S2IO_DRIVER_STAT_LEN    ARRAY_SIZE(ethtool_driver_stats_keys)
 329
 330 #define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN )
 331 #define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN )
 332
 333 #define XFRAME_I_STAT_STRINGS_LEN ( XFRAME_I_STAT_LEN * ETH_GSTRING_LEN )
 334 #define XFRAME_II_STAT_STRINGS_LEN ( XFRAME_II_STAT_LEN * ETH_GSTRING_LEN )
 335
 336 #define S2IO_TEST_LEN   ARRAY_SIZE(s2io_gstrings)
 337 #define S2IO_STRINGS_LEN        S2IO_TEST_LEN * ETH_GSTRING_LEN
 338
 339 #define S2IO_TIMER_CONF(timer, handle, arg, exp)                \
 340                         init_timer(&timer);                     \
 341                         timer.function = handle;                \
 342                         timer.data = (unsigned long) arg;       \
 343                         mod_timer(&timer, (jiffies + exp))      \
 344
 345 /* copy mac addr to def_mac_addr array */
 346 static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr)
 347 {
 348         sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr);
 349         sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8);
 350         sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16);
 351         sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24);
 352         sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32);
 353         sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40);
 354 }
 355 /* Add the vlan */
 356 static void s2io_vlan_rx_register(struct net_device *dev,
 357                                         struct vlan_group *grp)
 358 {
 359         int i;
 360         struct s2io_nic *nic = dev->priv;
 361         unsigned long flags[MAX_TX_FIFOS];
 362         struct mac_info *mac_control = &nic->mac_control;
 363         struct config_param *config = &nic->config;
 364
 365         for (i = 0; i < config->tx_fifo_num; i++)
 366                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
 367
 368         nic->vlgrp = grp;
 369         for (i = config->tx_fifo_num - 1; i >= 0; i--)
 370                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
 371                                 flags[i]);
 372 }
 373
 374 /* A flag indicating whether 'RX_PA_CFG_STRIP_VLAN_TAG' bit is set or not */
 375 static int vlan_strip_flag;
 376
 377 /* Unregister the vlan */
 378 static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
 379 {
 380         int i;
 381         struct s2io_nic *nic = dev->priv;
 382         unsigned long flags[MAX_TX_FIFOS];
 383         struct mac_info *mac_control = &nic->mac_control;
 384         struct config_param *config = &nic->config;
 385
 386         for (i = 0; i < config->tx_fifo_num; i++)
 387                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
 388
 389         if (nic->vlgrp)
 390                 vlan_group_set_device(nic->vlgrp, vid, NULL);
 391
 392         for (i = config->tx_fifo_num - 1; i >= 0; i--)
 393                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
 394                         flags[i]);
 395 }
 396
 397 /*
 398  * Constants to be programmed into the Xena's registers, to configure
 399  * the XAUI.
 400  */
 401
 402 #define END_SIGN        0x0
 403 static const u64 herc_act_dtx_cfg[] = {
 404         /* Set address */
 405         0x8000051536750000ULL, 0x80000515367500E0ULL,
 406         /* Write data */
 407         0x8000051536750004ULL, 0x80000515367500E4ULL,
 408         /* Set address */
 409         0x80010515003F0000ULL, 0x80010515003F00E0ULL,
 410         /* Write data */
 411         0x80010515003F0004ULL, 0x80010515003F00E4ULL,
 412         /* Set address */
 413         0x801205150D440000ULL, 0x801205150D4400E0ULL,
 414         /* Write data */
 415         0x801205150D440004ULL, 0x801205150D4400E4ULL,
 416         /* Set address */
 417         0x80020515F2100000ULL, 0x80020515F21000E0ULL,
 418         /* Write data */
 419         0x80020515F2100004ULL, 0x80020515F21000E4ULL,
 420         /* Done */
 421         END_SIGN
 422 };
 423
 424 static const u64 xena_dtx_cfg[] = {
 425         /* Set address */
 426         0x8000051500000000ULL, 0x80000515000000E0ULL,
 427         /* Write data */
 428         0x80000515D9350004ULL, 0x80000515D93500E4ULL,
 429         /* Set address */
 430         0x8001051500000000ULL, 0x80010515000000E0ULL,
 431         /* Write data */
 432         0x80010515001E0004ULL, 0x80010515001E00E4ULL,
 433         /* Set address */
 434         0x8002051500000000ULL, 0x80020515000000E0ULL,
 435         /* Write data */
 436         0x80020515F2100004ULL, 0x80020515F21000E4ULL,
 437         END_SIGN
 438 };
 439
 440 /*
 441  * Constants for Fixing the MacAddress problem seen mostly on
 442  * Alpha machines.
 443  */
 444 static const u64 fix_mac[] = {
 445         0x0060000000000000ULL, 0x0060600000000000ULL,
 446         0x0040600000000000ULL, 0x0000600000000000ULL,
 447         0x0020600000000000ULL, 0x0060600000000000ULL,
 448         0x0020600000000000ULL, 0x0060600000000000ULL,
 449         0x0020600000000000ULL, 0x0060600000000000ULL,
 450         0x0020600000000000ULL, 0x0060600000000000ULL,
 451         0x0020600000000000ULL, 0x0060600000000000ULL,
 452         0x0020600000000000ULL, 0x0060600000000000ULL,
 453         0x0020600000000000ULL, 0x0060600000000000ULL,
 454         0x0020600000000000ULL, 0x0060600000000000ULL,
 455         0x0020600000000000ULL, 0x0060600000000000ULL,
 456         0x0020600000000000ULL, 0x0060600000000000ULL,
 457         0x0020600000000000ULL, 0x0000600000000000ULL,
 458         0x0040600000000000ULL, 0x0060600000000000ULL,
 459         END_SIGN
 460 };
 461
 462 MODULE_LICENSE("GPL");
 463 MODULE_VERSION(DRV_VERSION);
 464
 465
 466 /* Module Loadable parameters. */
 467 S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM);
 468 S2IO_PARM_INT(rx_ring_num, 1);
 469 S2IO_PARM_INT(multiq, 0);
 470 S2IO_PARM_INT(rx_ring_mode, 1);
 471 S2IO_PARM_INT(use_continuous_tx_intrs, 1);
 472 S2IO_PARM_INT(rmac_pause_time, 0x100);
 473 S2IO_PARM_INT(mc_pause_threshold_q0q3, 187);
 474 S2IO_PARM_INT(mc_pause_threshold_q4q7, 187);
 475 S2IO_PARM_INT(shared_splits, 0);
 476 S2IO_PARM_INT(tmac_util_period, 5);
 477 S2IO_PARM_INT(rmac_util_period, 5);
 478 S2IO_PARM_INT(l3l4hdr_size, 128);
 479 /* 0 is no steering, 1 is Priority steering, 2 is Default steering */
 480 S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING);
 481 /* Frequency of Rx desc syncs expressed as power of 2 */
 482 S2IO_PARM_INT(rxsync_frequency, 3);
 483 /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
 484 S2IO_PARM_INT(intr_type, 2);
 485 /* Large receive offload feature */
 486 static unsigned int lro_enable;
 487 module_param_named(lro, lro_enable, uint, 0);
 488
 489 /* Max pkts to be aggregated by LRO at one time. If not specified,
 490  * aggregation happens until we hit max IP pkt size(64K)
 491  */
 492 S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
 493 S2IO_PARM_INT(indicate_max_pkts, 0);
 494
 495 S2IO_PARM_INT(napi, 1);
 496 S2IO_PARM_INT(ufo, 0);
 497 S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
 498
 499 static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
 500     {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
 501 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
 502     {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
 503 static unsigned int rts_frm_len[MAX_RX_RINGS] =
 504     {[0 ...(MAX_RX_RINGS - 1)] = 0 };
 505
 506 module_param_array(tx_fifo_len, uint, NULL, 0);
 507 module_param_array(rx_ring_sz, uint, NULL, 0);
 508 module_param_array(rts_frm_len, uint, NULL, 0);
 509
 510 /*
 511  * S2IO device table.
 512  * This table lists all the devices that this driver supports.
 513  */
 514 static struct pci_device_id s2io_tbl[] __devinitdata = {
 515         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
 516          PCI_ANY_ID, PCI_ANY_ID},
 517         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
 518          PCI_ANY_ID, PCI_ANY_ID},
 519         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
 520          PCI_ANY_ID, PCI_ANY_ID},
 521         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
 522          PCI_ANY_ID, PCI_ANY_ID},
 523         {0,}
 524 };
 525
 526 MODULE_DEVICE_TABLE(pci, s2io_tbl);
 527
 528 static struct pci_error_handlers s2io_err_handler = {
 529         .error_detected = s2io_io_error_detected,
 530         .slot_reset = s2io_io_slot_reset,
 531         .resume = s2io_io_resume,
 532 };
 533
 534 static struct pci_driver s2io_driver = {
 535       .name = "S2IO",
 536       .id_table = s2io_tbl,
 537       .probe = s2io_init_nic,
 538       .remove = __devexit_p(s2io_rem_nic),
 539       .err_handler = &s2io_err_handler,
 540 };
 541
 542 /* A simplifier macro used both by init and free shared_mem Fns(). */
 543 #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
 544
 545 /* netqueue manipulation helper functions */
 546 static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
 547 {
 548         if (!sp->config.multiq) {
 549                 int i;
 550
 551                 for (i = 0; i < sp->config.tx_fifo_num; i++)
 552                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
 553         }
 554         netif_tx_stop_all_queues(sp->dev);
 555 }
 556
 557 static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
 558 {
 559         if (!sp->config.multiq)
 560                 sp->mac_control.fifos[fifo_no].queue_state =
 561                         FIFO_QUEUE_STOP;
 562
 563         netif_tx_stop_all_queues(sp->dev);
 564 }
 565
 566 static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
 567 {
 568         if (!sp->config.multiq) {
 569                 int i;
 570
 571                 for (i = 0; i < sp->config.tx_fifo_num; i++)
 572                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
 573         }
 574         netif_tx_start_all_queues(sp->dev);
 575 }
 576
 577 static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
 578 {
 579         if (!sp->config.multiq)
 580                 sp->mac_control.fifos[fifo_no].queue_state =
 581                         FIFO_QUEUE_START;
 582
 583         netif_tx_start_all_queues(sp->dev);
 584 }
 585
 586 static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
 587 {
 588         if (!sp->config.multiq) {
 589                 int i;
 590
 591                 for (i = 0; i < sp->config.tx_fifo_num; i++)
 592                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
 593         }
 594         netif_tx_wake_all_queues(sp->dev);
 595 }
 596
 597 static inline void s2io_wake_tx_queue(
 598         struct fifo_info *fifo, int cnt, u8 multiq)
 599 {
 600
 601         if (multiq) {
 602                 if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
 603                         netif_wake_subqueue(fifo->dev, fifo->fifo_no);
 604         } else if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
 605                 if (netif_queue_stopped(fifo->dev)) {
 606                         fifo->queue_state = FIFO_QUEUE_START;
 607                         netif_wake_queue(fifo->dev);
 608                 }
 609         }
 610 }
 611
 612 /**
 613  * init_shared_mem - Allocation and Initialization of Memory
 614  * @nic: Device private variable.
 615  * Description: The function allocates all the memory areas shared
 616  * between the NIC and the driver. This includes Tx descriptors,
 617  * Rx descriptors and the statistics block.
 618  */
 619
 620 static int init_shared_mem(struct s2io_nic *nic)
 621 {
 622         u32 size;
 623         void *tmp_v_addr, *tmp_v_addr_next;
 624         dma_addr_t tmp_p_addr, tmp_p_addr_next;
 625         struct RxD_block *pre_rxd_blk = NULL;
 626         int i, j, blk_cnt;
 627         int lst_size, lst_per_page;
 628         struct net_device *dev = nic->dev;
 629         unsigned long tmp;
 630         struct buffAdd *ba;
 631
 632         struct mac_info *mac_control;
 633         struct config_param *config;
 634         unsigned long long mem_allocated = 0;
 635
 636         mac_control = &nic->mac_control;
 637         config = &nic->config;
 638
 639
 640         /* Allocation and initialization of TXDLs in FIOFs */
 641         size = 0;
 642         for (i = 0; i < config->tx_fifo_num; i++) {
 643                 size += config->tx_cfg[i].fifo_len;
 644         }
 645         if (size > MAX_AVAILABLE_TXDS) {
 646                 DBG_PRINT(ERR_DBG, "s2io: Requested TxDs too high, ");
 647                 DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
 648                 return -EINVAL;
 649         }
 650
 651         size = 0;
 652         for (i = 0; i < config->tx_fifo_num; i++) {
 653                 size = config->tx_cfg[i].fifo_len;
 654                 /*
 655                  * Legal values are from 2 to 8192
 656                  */
 657                 if (size < 2) {
 658                         DBG_PRINT(ERR_DBG, "s2io: Invalid fifo len (%d)", size);
 659                         DBG_PRINT(ERR_DBG, "for fifo %d\n", i);
 660                         DBG_PRINT(ERR_DBG, "s2io: Legal values for fifo len"
 661                                 "are 2 to 8192\n");
 662                         return -EINVAL;
 663                 }
 664         }
 665
 666         lst_size = (sizeof(struct TxD) * config->max_txds);
 667         lst_per_page = PAGE_SIZE / lst_size;
 668
 669         for (i = 0; i < config->tx_fifo_num; i++) {
 670                 int fifo_len = config->tx_cfg[i].fifo_len;
 671                 int list_holder_size = fifo_len * sizeof(struct list_info_hold);
 672                 mac_control->fifos[i].list_info = kzalloc(list_holder_size,
 673                                                           GFP_KERNEL);
 674                 if (!mac_control->fifos[i].list_info) {
 675                         DBG_PRINT(INFO_DBG,
 676                                   "Malloc failed for list_info\n");
 677                         return -ENOMEM;
 678                 }
 679                 mem_allocated += list_holder_size;
 680         }
 681         for (i = 0; i < config->tx_fifo_num; i++) {
 682                 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
 683                                                 lst_per_page);
 684                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
 685                 mac_control->fifos[i].tx_curr_put_info.fifo_len =
 686                     config->tx_cfg[i].fifo_len - 1;
 687                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
 688                 mac_control->fifos[i].tx_curr_get_info.fifo_len =
 689                     config->tx_cfg[i].fifo_len - 1;
 690                 mac_control->fifos[i].fifo_no = i;
 691                 mac_control->fifos[i].nic = nic;
 692                 mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2;
 693                 mac_control->fifos[i].dev = dev;
 694
 695                 for (j = 0; j < page_num; j++) {
 696                         int k = 0;
 697                         dma_addr_t tmp_p;
 698                         void *tmp_v;
 699                         tmp_v = pci_alloc_consistent(nic->pdev,
 700                                                      PAGE_SIZE, &tmp_p);
 701                         if (!tmp_v) {
 702                                 DBG_PRINT(INFO_DBG,
 703                                           "pci_alloc_consistent ");
 704                                 DBG_PRINT(INFO_DBG, "failed for TxDL\n");
 705                                 return -ENOMEM;
 706                         }
 707                         /* If we got a zero DMA address(can happen on
 708                          * certain platforms like PPC), reallocate.
 709                          * Store virtual address of page we don't want,
 710                          * to be freed later.
 711                          */
 712                         if (!tmp_p) {
 713                                 mac_control->zerodma_virt_addr = tmp_v;
 714                                 DBG_PRINT(INIT_DBG,
 715                                 "%s: Zero DMA address for TxDL. ", dev->name);
 716                                 DBG_PRINT(INIT_DBG,
 717                                 "Virtual address %p\n", tmp_v);
 718                                 tmp_v = pci_alloc_consistent(nic->pdev,
 719                                                      PAGE_SIZE, &tmp_p);
 720                                 if (!tmp_v) {
 721                                         DBG_PRINT(INFO_DBG,
 722                                           "pci_alloc_consistent ");
 723                                         DBG_PRINT(INFO_DBG, "failed for TxDL\n");
 724                                         return -ENOMEM;
 725                                 }
 726                                 mem_allocated += PAGE_SIZE;
 727                         }
 728                         while (k < lst_per_page) {
 729                                 int l = (j * lst_per_page) + k;
 730                                 if (l == config->tx_cfg[i].fifo_len)
 731                                         break;
 732                                 mac_control->fifos[i].list_info[l].list_virt_addr =
 733                                     tmp_v + (k * lst_size);
 734                                 mac_control->fifos[i].list_info[l].list_phy_addr =
 735                                     tmp_p + (k * lst_size);
 736                                 k++;
 737                         }
 738                 }
 739         }
 740
 741         for (i = 0; i < config->tx_fifo_num; i++) {
 742                 size = config->tx_cfg[i].fifo_len;
 743                 mac_control->fifos[i].ufo_in_band_v
 744                         = kcalloc(size, sizeof(u64), GFP_KERNEL);
 745                 if (!mac_control->fifos[i].ufo_in_band_v)
 746                         return -ENOMEM;
 747                 mem_allocated += (size * sizeof(u64));
 748         }
 749
 750         /* Allocation and initialization of RXDs in Rings */
 751         size = 0;
 752         for (i = 0; i < config->rx_ring_num; i++) {
 753                 if (config->rx_cfg[i].num_rxd %
 754                     (rxd_count[nic->rxd_mode] + 1)) {
 755                         DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
 756                         DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ",
 757                                   i);
 758                         DBG_PRINT(ERR_DBG, "RxDs per Block");
 759                         return FAILURE;
 760                 }
 761                 size += config->rx_cfg[i].num_rxd;
 762                 mac_control->rings[i].block_count =
 763                         config->rx_cfg[i].num_rxd /
 764                         (rxd_count[nic->rxd_mode] + 1 );
 765                 mac_control->rings[i].pkt_cnt = config->rx_cfg[i].num_rxd -
 766                         mac_control->rings[i].block_count;
 767         }
 768         if (nic->rxd_mode == RXD_MODE_1)
 769                 size = (size * (sizeof(struct RxD1)));
 770         else
 771                 size = (size * (sizeof(struct RxD3)));
 772
 773         for (i = 0; i < config->rx_ring_num; i++) {
 774                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
 775                 mac_control->rings[i].rx_curr_get_info.offset = 0;
 776                 mac_control->rings[i].rx_curr_get_info.ring_len =
 777                     config->rx_cfg[i].num_rxd - 1;
 778                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
 779                 mac_control->rings[i].rx_curr_put_info.offset = 0;
 780                 mac_control->rings[i].rx_curr_put_info.ring_len =
 781                     config->rx_cfg[i].num_rxd - 1;
 782                 mac_control->rings[i].nic = nic;
 783                 mac_control->rings[i].ring_no = i;
 784                 mac_control->rings[i].lro = lro_enable;
 785
 786                 blk_cnt = config->rx_cfg[i].num_rxd /
 787                                 (rxd_count[nic->rxd_mode] + 1);
 788                 /*  Allocating all the Rx blocks */
 789                 for (j = 0; j < blk_cnt; j++) {
 790                         struct rx_block_info *rx_blocks;
 791                         int l;
 792
 793                         rx_blocks = &mac_control->rings[i].rx_blocks[j];
 794                         size = SIZE_OF_BLOCK; //size is always page size
 795                         tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
 796                                                           &tmp_p_addr);
 797                         if (tmp_v_addr == NULL) {
 798                                 /*
 799                                  * In case of failure, free_shared_mem()
 800                                  * is called, which should free any
 801                                  * memory that was alloced till the
 802                                  * failure happened.
 803                                  */
 804                                 rx_blocks->block_virt_addr = tmp_v_addr;
 805                                 return -ENOMEM;
 806                         }
 807                         mem_allocated += size;
 808                         memset(tmp_v_addr, 0, size);
 809                         rx_blocks->block_virt_addr = tmp_v_addr;
 810                         rx_blocks->block_dma_addr = tmp_p_addr;
 811                         rx_blocks->rxds = kmalloc(sizeof(struct rxd_info)*
 812                                                   rxd_count[nic->rxd_mode],
 813                                                   GFP_KERNEL);
 814                         if (!rx_blocks->rxds)
 815                                 return -ENOMEM;
 816                         mem_allocated +=
 817                         (sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
 818                         for (l=0; l<rxd_count[nic->rxd_mode];l++) {
 819                                 rx_blocks->rxds[l].virt_addr =
 820                                         rx_blocks->block_virt_addr +
 821                                         (rxd_size[nic->rxd_mode] * l);
 822                                 rx_blocks->rxds[l].dma_addr =
 823                                         rx_blocks->block_dma_addr +
 824                                         (rxd_size[nic->rxd_mode] * l);
 825                         }
 826                 }
 827                 /* Interlinking all Rx Blocks */
 828                 for (j = 0; j < blk_cnt; j++) {
 829                         tmp_v_addr =
 830                                 mac_control->rings[i].rx_blocks[j].block_virt_addr;
 831                         tmp_v_addr_next =
 832                                 mac_control->rings[i].rx_blocks[(j + 1) %
 833                                               blk_cnt].block_virt_addr;
 834                         tmp_p_addr =
 835                                 mac_control->rings[i].rx_blocks[j].block_dma_addr;
 836                         tmp_p_addr_next =
 837                                 mac_control->rings[i].rx_blocks[(j + 1) %
 838                                               blk_cnt].block_dma_addr;
 839
 840                         pre_rxd_blk = (struct RxD_block *) tmp_v_addr;
 841                         pre_rxd_blk->reserved_2_pNext_RxD_block =
 842                             (unsigned long) tmp_v_addr_next;
 843                         pre_rxd_blk->pNext_RxD_Blk_physical =
 844                             (u64) tmp_p_addr_next;
 845                 }
 846         }
 847         if (nic->rxd_mode == RXD_MODE_3B) {
 848                 /*
 849                  * Allocation of Storages for buffer addresses in 2BUFF mode
 850                  * and the buffers as well.
 851                  */
 852                 for (i = 0; i < config->rx_ring_num; i++) {
 853                         blk_cnt = config->rx_cfg[i].num_rxd /
 854                            (rxd_count[nic->rxd_mode]+ 1);
 855                         mac_control->rings[i].ba =
 856                                 kmalloc((sizeof(struct buffAdd *) * blk_cnt),
 857                                      GFP_KERNEL);
 858                         if (!mac_control->rings[i].ba)
 859                                 return -ENOMEM;
 860                         mem_allocated +=(sizeof(struct buffAdd *) * blk_cnt);
 861                         for (j = 0; j < blk_cnt; j++) {
 862                                 int k = 0;
 863                                 mac_control->rings[i].ba[j] =
 864                                         kmalloc((sizeof(struct buffAdd) *
 865                                                 (rxd_count[nic->rxd_mode] + 1)),
 866                                                 GFP_KERNEL);
 867                                 if (!mac_control->rings[i].ba[j])
 868                                         return -ENOMEM;
 869                                 mem_allocated += (sizeof(struct buffAdd) *  \
 870                                         (rxd_count[nic->rxd_mode] + 1));
 871                                 while (k != rxd_count[nic->rxd_mode]) {
 872                                         ba = &mac_control->rings[i].ba[j][k];
 873
 874                                         ba->ba_0_org = (void *) kmalloc
 875                                             (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
 876                                         if (!ba->ba_0_org)
 877                                                 return -ENOMEM;
 878                                         mem_allocated +=
 879                                                 (BUF0_LEN + ALIGN_SIZE);
 880                                         tmp = (unsigned long)ba->ba_0_org;
 881                                         tmp += ALIGN_SIZE;
 882                                         tmp &= ~((unsigned long) ALIGN_SIZE);
 883                                         ba->ba_0 = (void *) tmp;
 884
 885                                         ba->ba_1_org = (void *) kmalloc
 886                                             (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
 887                                         if (!ba->ba_1_org)
 888                                                 return -ENOMEM;
 889                                         mem_allocated
 890                                                 += (BUF1_LEN + ALIGN_SIZE);
 891                                         tmp = (unsigned long) ba->ba_1_org;
 892                                         tmp += ALIGN_SIZE;
 893                                         tmp &= ~((unsigned long) ALIGN_SIZE);
 894                                         ba->ba_1 = (void *) tmp;
 895                                         k++;
 896                                 }
 897                         }
 898                 }
 899         }
 900
 901         /* Allocation and initialization of Statistics block */
 902         size = sizeof(struct stat_block);
 903         mac_control->stats_mem = pci_alloc_consistent
 904             (nic->pdev, size, &mac_control->stats_mem_phy);
 905
 906         if (!mac_control->stats_mem) {
 907                 /*
 908                  * In case of failure, free_shared_mem() is called, which
 909                  * should free any memory that was alloced till the
 910                  * failure happened.
 911                  */
 912                 return -ENOMEM;
 913         }
 914         mem_allocated += size;
 915         mac_control->stats_mem_sz = size;
 916
 917         tmp_v_addr = mac_control->stats_mem;
 918         mac_control->stats_info = (struct stat_block *) tmp_v_addr;
 919         memset(tmp_v_addr, 0, size);
 920         DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
 921                   (unsigned long long) tmp_p_addr);
 922         mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
 923         return SUCCESS;
 924 }
 925
 926 /**
 927  * free_shared_mem - Free the allocated Memory
 928  * @nic:  Device private variable.
 929  * Description: This function is to free all memory locations allocated by
 930  * the init_shared_mem() function and return it to the kernel.
 931  */
 932
 933 static void free_shared_mem(struct s2io_nic *nic)
 934 {
 935         int i, j, blk_cnt, size;
 936         void *tmp_v_addr;
 937         dma_addr_t tmp_p_addr;
 938         struct mac_info *mac_control;
 939         struct config_param *config;
 940         int lst_size, lst_per_page;
 941         struct net_device *dev;
 942         int page_num = 0;
 943
 944         if (!nic)
 945                 return;
 946
 947         dev = nic->dev;
 948
 949         mac_control = &nic->mac_control;
 950         config = &nic->config;
 951
 952         lst_size = (sizeof(struct TxD) * config->max_txds);
 953         lst_per_page = PAGE_SIZE / lst_size;
 954
 955         for (i = 0; i < config->tx_fifo_num; i++) {
 956                 page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
 957                                                         lst_per_page);
 958                 for (j = 0; j < page_num; j++) {
 959                         int mem_blks = (j * lst_per_page);
 960                         if (!mac_control->fifos[i].list_info)
 961                                 return;
 962                         if (!mac_control->fifos[i].list_info[mem_blks].
 963                                  list_virt_addr)
 964                                 break;
 965                         pci_free_consistent(nic->pdev, PAGE_SIZE,
 966                                             mac_control->fifos[i].
 967                                             list_info[mem_blks].
 968                                             list_virt_addr,
 969                                             mac_control->fifos[i].
 970                                             list_info[mem_blks].
 971                                             list_phy_addr);
 972                         nic->mac_control.stats_info->sw_stat.mem_freed
 973                                                 += PAGE_SIZE;
 974                 }
 975                 /* If we got a zero DMA address during allocation,
 976                  * free the page now
 977                  */
 978                 if (mac_control->zerodma_virt_addr) {
 979                         pci_free_consistent(nic->pdev, PAGE_SIZE,
 980                                             mac_control->zerodma_virt_addr,
 981                                             (dma_addr_t)0);
 982                         DBG_PRINT(INIT_DBG,
 983                                 "%s: Freeing TxDL with zero DMA addr. ",
 984                                 dev->name);
 985                         DBG_PRINT(INIT_DBG, "Virtual address %p\n",
 986                                 mac_control->zerodma_virt_addr);
 987                         nic->mac_control.stats_info->sw_stat.mem_freed
 988                                                 += PAGE_SIZE;
 989                 }
 990                 kfree(mac_control->fifos[i].list_info);
 991                 nic->mac_control.stats_info->sw_stat.mem_freed +=
 992                 (nic->config.tx_cfg[i].fifo_len *sizeof(struct list_info_hold));
 993         }
 994
 995         size = SIZE_OF_BLOCK;
 996         for (i = 0; i < config->rx_ring_num; i++) {
 997                 blk_cnt = mac_control->rings[i].block_count;
 998                 for (j = 0; j < blk_cnt; j++) {
 999                         tmp_v_addr = mac_control->rings[i].rx_blocks[j].
1000                                 block_virt_addr;
1001                         tmp_p_addr = mac_control->rings[i].rx_blocks[j].
1002                                 block_dma_addr;
1003                         if (tmp_v_addr == NULL)
1004                                 break;
1005                         pci_free_consistent(nic->pdev, size,
1006                                             tmp_v_addr, tmp_p_addr);
1007                         nic->mac_control.stats_info->sw_stat.mem_freed += size;
1008                         kfree(mac_control->rings[i].rx_blocks[j].rxds);
1009                         nic->mac_control.stats_info->sw_stat.mem_freed +=
1010                         ( sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
1011                 }
1012         }
1013
1014         if (nic->rxd_mode == RXD_MODE_3B) {
1015                 /* Freeing buffer storage addresses in 2BUFF mode. */
1016                 for (i = 0; i < config->rx_ring_num; i++) {
1017                         blk_cnt = config->rx_cfg[i].num_rxd /
1018                             (rxd_count[nic->rxd_mode] + 1);
1019                         for (j = 0; j < blk_cnt; j++) {
1020                                 int k = 0;
1021                                 if (!mac_control->rings[i].ba[j])
1022                                         continue;
1023                                 while (k != rxd_count[nic->rxd_mode]) {
1024                                         struct buffAdd *ba =
1025                                                 &mac_control->rings[i].ba[j][k];
1026                                         kfree(ba->ba_0_org);
1027                                         nic->mac_control.stats_info->sw_stat.\
1028                                         mem_freed += (BUF0_LEN + ALIGN_SIZE);
1029                                         kfree(ba->ba_1_org);
1030                                         nic->mac_control.stats_info->sw_stat.\
1031                                         mem_freed += (BUF1_LEN + ALIGN_SIZE);
1032                                         k++;
1033                                 }
1034                                 kfree(mac_control->rings[i].ba[j]);
1035                                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1036                                         (sizeof(struct buffAdd) *
1037                                         (rxd_count[nic->rxd_mode] + 1));
1038                         }
1039                         kfree(mac_control->rings[i].ba);
1040                         nic->mac_control.stats_info->sw_stat.mem_freed +=
1041                         (sizeof(struct buffAdd *) * blk_cnt);
1042                 }
1043         }
1044
1045         for (i = 0; i < nic->config.tx_fifo_num; i++) {
1046                 if (mac_control->fifos[i].ufo_in_band_v) {
1047                         nic->mac_control.stats_info->sw_stat.mem_freed
1048                                 += (config->tx_cfg[i].fifo_len * sizeof(u64));
1049                         kfree(mac_control->fifos[i].ufo_in_band_v);
1050                 }
1051         }
1052
1053         if (mac_control->stats_mem) {
1054                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1055                         mac_control->stats_mem_sz;
1056                 pci_free_consistent(nic->pdev,
1057                                     mac_control->stats_mem_sz,
1058                                     mac_control->stats_mem,
1059                                     mac_control->stats_mem_phy);
1060         }
1061 }
1062
1063 /**
1064  * s2io_verify_pci_mode -
1065  */
1066
1067 static int s2io_verify_pci_mode(struct s2io_nic *nic)
1068 {
1069         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1070         register u64 val64 = 0;
1071         int     mode;
1072
1073         val64 = readq(&bar0->pci_mode);
1074         mode = (u8)GET_PCI_MODE(val64);
1075
1076         if ( val64 & PCI_MODE_UNKNOWN_MODE)
1077                 return -1;      /* Unknown PCI mode */
1078         return mode;
1079 }
1080
1081 #define NEC_VENID   0x1033
1082 #define NEC_DEVID   0x0125
1083 static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev)
1084 {
1085         struct pci_dev *tdev = NULL;
1086         while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
1087                 if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
1088                         if (tdev->bus == s2io_pdev->bus->parent) {
1089                                 pci_dev_put(tdev);
1090                                 return 1;
1091                         }
1092                 }
1093         }
1094         return 0;
1095 }
1096
1097 static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266};
1098 /**
1099  * s2io_print_pci_mode -
1100  */
1101 static int s2io_print_pci_mode(struct s2io_nic *nic)
1102 {
1103         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1104         register u64 val64 = 0;
1105         int     mode;
1106         struct config_param *config = &nic->config;
1107
1108         val64 = readq(&bar0->pci_mode);
1109         mode = (u8)GET_PCI_MODE(val64);
1110
1111         if ( val64 & PCI_MODE_UNKNOWN_MODE)
1112                 return -1;      /* Unknown PCI mode */
1113
1114         config->bus_speed = bus_speed[mode];
1115
1116         if (s2io_on_nec_bridge(nic->pdev)) {
1117                 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
1118                                                         nic->dev->name);
1119                 return mode;
1120         }
1121
1122         if (val64 & PCI_MODE_32_BITS) {
1123                 DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
1124         } else {
1125                 DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
1126         }
1127
1128         switch(mode) {
1129                 case PCI_MODE_PCI_33:
1130                         DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
1131                         break;
1132                 case PCI_MODE_PCI_66:
1133                         DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
1134                         break;
1135                 case PCI_MODE_PCIX_M1_66:
1136                         DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
1137                         break;
1138                 case PCI_MODE_PCIX_M1_100:
1139                         DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
1140                         break;
1141                 case PCI_MODE_PCIX_M1_133:
1142                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
1143                         break;
1144                 case PCI_MODE_PCIX_M2_66:
1145                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
1146                         break;
1147                 case PCI_MODE_PCIX_M2_100:
1148                         DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
1149                         break;
1150                 case PCI_MODE_PCIX_M2_133:
1151                         DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
1152                         break;
1153                 default:
1154                         return -1;      /* Unsupported bus speed */
1155         }
1156
1157         return mode;
1158 }
1159
1160 /**
1161  *  init_tti - Initialization transmit traffic interrupt scheme
1162  *  @nic: device private variable
1163  *  @link: link status (UP/DOWN) used to enable/disable continuous
1164  *  transmit interrupts
1165  *  Description: The function configures transmit traffic interrupts
1166  *  Return Value:  SUCCESS on success and
1167  *  '-1' on failure
1168  */
1169
1170 static int init_tti(struct s2io_nic *nic, int link)
1171 {
1172         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1173         register u64 val64 = 0;
1174         int i;
1175         struct config_param *config;
1176
1177         config = &nic->config;
1178
1179         for (i = 0; i < config->tx_fifo_num; i++) {
1180                 /*
1181                  * TTI Initialization. Default Tx timer gets us about
1182                  * 250 interrupts per sec. Continuous interrupts are enabled
1183                  * by default.
1184                  */
1185                 if (nic->device_type == XFRAME_II_DEVICE) {
1186                         int count = (nic->config.bus_speed * 125)/2;
1187                         val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
1188                 } else
1189                         val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
1190
1191                 val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
1192                                 TTI_DATA1_MEM_TX_URNG_B(0x10) |
1193                                 TTI_DATA1_MEM_TX_URNG_C(0x30) |
1194                                 TTI_DATA1_MEM_TX_TIMER_AC_EN;
1195                 if (i == 0)
1196                         if (use_continuous_tx_intrs && (link == LINK_UP))
1197                                 val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
1198                 writeq(val64, &bar0->tti_data1_mem);
1199
1200                 if (nic->config.intr_type == MSI_X) {
1201                         val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1202                                 TTI_DATA2_MEM_TX_UFC_B(0x100) |
1203                                 TTI_DATA2_MEM_TX_UFC_C(0x200) |
1204                                 TTI_DATA2_MEM_TX_UFC_D(0x300);
1205                 } else {
1206                         if ((nic->config.tx_steering_type ==
1207                                 TX_DEFAULT_STEERING) &&
1208                                 (config->tx_fifo_num > 1) &&
1209                                 (i >= nic->udp_fifo_idx) &&
1210                                 (i < (nic->udp_fifo_idx +
1211                                 nic->total_udp_fifos)))
1212                                 val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
1213                                         TTI_DATA2_MEM_TX_UFC_B(0x80) |
1214                                         TTI_DATA2_MEM_TX_UFC_C(0x100) |
1215                                         TTI_DATA2_MEM_TX_UFC_D(0x120);
1216                         else
1217                                 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1218                                         TTI_DATA2_MEM_TX_UFC_B(0x20) |
1219                                         TTI_DATA2_MEM_TX_UFC_C(0x40) |
1220                                         TTI_DATA2_MEM_TX_UFC_D(0x80);
1221                 }
1222
1223                 writeq(val64, &bar0->tti_data2_mem);
1224
1225                 val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD |
1226                                 TTI_CMD_MEM_OFFSET(i);
1227                 writeq(val64, &bar0->tti_command_mem);
1228
1229                 if (wait_for_cmd_complete(&bar0->tti_command_mem,
1230                         TTI_CMD_MEM_STROBE_NEW_CMD, S2IO_BIT_RESET) != SUCCESS)
1231                         return FAILURE;
1232         }
1233
1234         return SUCCESS;
1235 }
1236
1237 /**
1238  *  init_nic - Initialization of hardware
1239  *  @nic: device private variable
1240  *  Description: The function sequentially configures every block
1241  *  of the H/W from their reset values.
1242  *  Return Value:  SUCCESS on success and
1243  *  '-1' on failure (endian settings incorrect).
1244  */
1245
1246 static int init_nic(struct s2io_nic *nic)
1247 {
1248         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1249         struct net_device *dev = nic->dev;
1250         register u64 val64 = 0;
1251         void __iomem *add;
1252         u32 time;
1253         int i, j;
1254         struct mac_info *mac_control;
1255         struct config_param *config;
1256         int dtx_cnt = 0;
1257         unsigned long long mem_share;
1258         int mem_size;
1259
1260         mac_control = &nic->mac_control;
1261         config = &nic->config;
1262
1263         /* to set the swapper controle on the card */
1264         if(s2io_set_swapper(nic)) {
1265                 DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
1266                 return -EIO;
1267         }
1268
1269         /*
1270          * Herc requires EOI to be removed from reset before XGXS, so..
1271          */
1272         if (nic->device_type & XFRAME_II_DEVICE) {
1273                 val64 = 0xA500000000ULL;
1274                 writeq(val64, &bar0->sw_reset);
1275                 msleep(500);
1276                 val64 = readq(&bar0->sw_reset);
1277         }
1278
1279         /* Remove XGXS from reset state */
1280         val64 = 0;
1281         writeq(val64, &bar0->sw_reset);
1282         msleep(500);
1283         val64 = readq(&bar0->sw_reset);
1284
1285         /* Ensure that it's safe to access registers by checking
1286          * RIC_RUNNING bit is reset. Check is valid only for XframeII.
1287          */
1288         if (nic->device_type == XFRAME_II_DEVICE) {
1289                 for (i = 0; i < 50; i++) {
1290                         val64 = readq(&bar0->adapter_status);
1291                         if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
1292                                 break;
1293                         msleep(10);
1294                 }
1295                 if (i == 50)
1296                         return -ENODEV;
1297         }
1298
1299         /*  Enable Receiving broadcasts */
1300         add = &bar0->mac_cfg;
1301         val64 = readq(&bar0->mac_cfg);
1302         val64 |= MAC_RMAC_BCAST_ENABLE;
1303         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1304         writel((u32) val64, add);
1305         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1306         writel((u32) (val64 >> 32), (add + 4));
1307
1308         /* Read registers in all blocks */
1309         val64 = readq(&bar0->mac_int_mask);
1310         val64 = readq(&bar0->mc_int_mask);
1311         val64 = readq(&bar0->xgxs_int_mask);
1312
1313         /*  Set MTU */
1314         val64 = dev->mtu;
1315         writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
1316
1317         if (nic->device_type & XFRAME_II_DEVICE) {
1318                 while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
1319                         SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
1320                                           &bar0->dtx_control, UF);
1321                         if (dtx_cnt & 0x1)
1322                                 msleep(1); /* Necessary!! */
1323                         dtx_cnt++;
1324                 }
1325         } else {
1326                 while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
1327                         SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
1328                                           &bar0->dtx_control, UF);
1329                         val64 = readq(&bar0->dtx_control);
1330                         dtx_cnt++;
1331                 }
1332         }
1333
1334         /*  Tx DMA Initialization */
1335         val64 = 0;
1336         writeq(val64, &bar0->tx_fifo_partition_0);
1337         writeq(val64, &bar0->tx_fifo_partition_1);
1338         writeq(val64, &bar0->tx_fifo_partition_2);
1339         writeq(val64, &bar0->tx_fifo_partition_3);
1340
1341
1342         for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
1343                 val64 |=
1344                     vBIT(config->tx_cfg[i].fifo_len - 1, ((j * 32) + 19),
1345                          13) | vBIT(config->tx_cfg[i].fifo_priority,
1346                                     ((j * 32) + 5), 3);
1347
1348                 if (i == (config->tx_fifo_num - 1)) {
1349                         if (i % 2 == 0)
1350                                 i++;
1351                 }
1352
1353                 switch (i) {
1354                 case 1:
1355                         writeq(val64, &bar0->tx_fifo_partition_0);
1356                         val64 = 0;
1357                         j = 0;
1358                         break;
1359                 case 3:
1360                         writeq(val64, &bar0->tx_fifo_partition_1);
1361                         val64 = 0;
1362                         j = 0;
1363                         break;
1364                 case 5:
1365                         writeq(val64, &bar0->tx_fifo_partition_2);
1366                         val64 = 0;
1367                         j = 0;
1368                         break;
1369                 case 7:
1370                         writeq(val64, &bar0->tx_fifo_partition_3);
1371                         val64 = 0;
1372                         j = 0;
1373                         break;
1374                 default:
1375                         j++;
1376                         break;
1377                 }
1378         }
1379
1380         /*
1381          * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
1382          * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
1383          */
1384         if ((nic->device_type == XFRAME_I_DEVICE) &&
1385                 (nic->pdev->revision < 4))
1386                 writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
1387
1388         val64 = readq(&bar0->tx_fifo_partition_0);
1389         DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
1390                   &bar0->tx_fifo_partition_0, (unsigned long long) val64);
1391
1392         /*
1393          * Initialization of Tx_PA_CONFIG register to ignore packet
1394          * integrity checking.
1395          */
1396         val64 = readq(&bar0->tx_pa_cfg);
1397         val64 |= TX_PA_CFG_IGNORE_FRM_ERR | TX_PA_CFG_IGNORE_SNAP_OUI |
1398             TX_PA_CFG_IGNORE_LLC_CTRL | TX_PA_CFG_IGNORE_L2_ERR;
1399         writeq(val64, &bar0->tx_pa_cfg);
1400
1401         /* Rx DMA intialization. */
1402         val64 = 0;
1403         for (i = 0; i < config->rx_ring_num; i++) {
1404                 val64 |=
1405                     vBIT(config->rx_cfg[i].ring_priority, (5 + (i * 8)),
1406                          3);
1407         }
1408         writeq(val64, &bar0->rx_queue_priority);
1409
1410         /*
1411          * Allocating equal share of memory to all the
1412          * configured Rings.
1413          */
1414         val64 = 0;
1415         if (nic->device_type & XFRAME_II_DEVICE)
1416                 mem_size = 32;
1417         else
1418                 mem_size = 64;
1419
1420         for (i = 0; i < config->rx_ring_num; i++) {
1421                 switch (i) {
1422                 case 0:
1423                         mem_share = (mem_size / config->rx_ring_num +
1424                                      mem_size % config->rx_ring_num);
1425                         val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
1426                         continue;
1427                 case 1:
1428                         mem_share = (mem_size / config->rx_ring_num);
1429                         val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
1430                         continue;
1431                 case 2:
1432                         mem_share = (mem_size / config->rx_ring_num);
1433                         val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
1434                         continue;
1435                 case 3:
1436                         mem_share = (mem_size / config->rx_ring_num);
1437                         val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
1438                         continue;
1439                 case 4:
1440                         mem_share = (mem_size / config->rx_ring_num);
1441                         val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
1442                         continue;
1443                 case 5:
1444                         mem_share = (mem_size / config->rx_ring_num);
1445                         val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
1446                         continue;
1447                 case 6:
1448                         mem_share = (mem_size / config->rx_ring_num);
1449                         val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
1450                         continue;
1451                 case 7:
1452                         mem_share = (mem_size / config->rx_ring_num);
1453                         val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
1454                         continue;
1455                 }
1456         }
1457         writeq(val64, &bar0->rx_queue_cfg);
1458
1459         /*
1460          * Filling Tx round robin registers
1461          * as per the number of FIFOs for equal scheduling priority
1462          */
1463         switch (config->tx_fifo_num) {
1464         case 1:
1465                 val64 = 0x0;
1466                 writeq(val64, &bar0->tx_w_round_robin_0);
1467                 writeq(val64, &bar0->tx_w_round_robin_1);
1468                 writeq(val64, &bar0->tx_w_round_robin_2);
1469                 writeq(val64, &bar0->tx_w_round_robin_3);
1470                 writeq(val64, &bar0->tx_w_round_robin_4);
1471                 break;
1472         case 2:
1473                 val64 = 0x0001000100010001ULL;
1474                 writeq(val64, &bar0->tx_w_round_robin_0);
1475                 writeq(val64, &bar0->tx_w_round_robin_1);
1476                 writeq(val64, &bar0->tx_w_round_robin_2);
1477                 writeq(val64, &bar0->tx_w_round_robin_3);
1478                 val64 = 0x0001000100000000ULL;
1479                 writeq(val64, &bar0->tx_w_round_robin_4);
1480                 break;
1481         case 3:
1482                 val64 = 0x0001020001020001ULL;
1483                 writeq(val64, &bar0->tx_w_round_robin_0);
1484                 val64 = 0x0200010200010200ULL;
1485                 writeq(val64, &bar0->tx_w_round_robin_1);
1486                 val64 = 0x0102000102000102ULL;
1487                 writeq(val64, &bar0->tx_w_round_robin_2);
1488                 val64 = 0x0001020001020001ULL;
1489                 writeq(val64, &bar0->tx_w_round_robin_3);
1490                 val64 = 0x0200010200000000ULL;
1491                 writeq(val64, &bar0->tx_w_round_robin_4);
1492                 break;
1493         case 4:
1494                 val64 = 0x0001020300010203ULL;
1495                 writeq(val64, &bar0->tx_w_round_robin_0);
1496                 writeq(val64, &bar0->tx_w_round_robin_1);
1497                 writeq(val64, &bar0->tx_w_round_robin_2);
1498                 writeq(val64, &bar0->tx_w_round_robin_3);
1499                 val64 = 0x0001020300000000ULL;
1500                 writeq(val64, &bar0->tx_w_round_robin_4);
1501                 break;
1502         case 5:
1503                 val64 = 0x0001020304000102ULL;
1504                 writeq(val64, &bar0->tx_w_round_robin_0);
1505                 val64 = 0x0304000102030400ULL;
1506                 writeq(val64, &bar0->tx_w_round_robin_1);
1507                 val64 = 0x0102030400010203ULL;
1508                 writeq(val64, &bar0->tx_w_round_robin_2);
1509                 val64 = 0x0400010203040001ULL;
1510                 writeq(val64, &bar0->tx_w_round_robin_3);
1511                 val64 = 0x0203040000000000ULL;
1512                 writeq(val64, &bar0->tx_w_round_robin_4);
1513                 break;
1514         case 6:
1515                 val64 = 0x0001020304050001ULL;
1516                 writeq(val64, &bar0->tx_w_round_robin_0);
1517                 val64 = 0x0203040500010203ULL;
1518                 writeq(val64, &bar0->tx_w_round_robin_1);
1519                 val64 = 0x0405000102030405ULL;
1520                 writeq(val64, &bar0->tx_w_round_robin_2);
1521                 val64 = 0x0001020304050001ULL;
1522                 writeq(val64, &bar0->tx_w_round_robin_3);
1523                 val64 = 0x0203040500000000ULL;
1524                 writeq(val64, &bar0->tx_w_round_robin_4);
1525                 break;
1526         case 7:
1527                 val64 = 0x0001020304050600ULL;
1528                 writeq(val64, &bar0->tx_w_round_robin_0);
1529                 val64 = 0x0102030405060001ULL;
1530                 writeq(val64, &bar0->tx_w_round_robin_1);
1531                 val64 = 0x0203040506000102ULL;
1532                 writeq(val64, &bar0->tx_w_round_robin_2);
1533                 val64 = 0x0304050600010203ULL;
1534                 writeq(val64, &bar0->tx_w_round_robin_3);
1535                 val64 = 0x0405060000000000ULL;
1536                 writeq(val64, &bar0->tx_w_round_robin_4);
1537                 break;
1538         case 8:
1539                 val64 = 0x0001020304050607ULL;
1540                 writeq(val64, &bar0->tx_w_round_robin_0);
1541                 writeq(val64, &bar0->tx_w_round_robin_1);
1542                 writeq(val64, &bar0->tx_w_round_robin_2);
1543                 writeq(val64, &bar0->tx_w_round_robin_3);
1544                 val64 = 0x0001020300000000ULL;
1545                 writeq(val64, &bar0->tx_w_round_robin_4);
1546                 break;
1547         }
1548
1549         /* Enable all configured Tx FIFO partitions */
1550         val64 = readq(&bar0->tx_fifo_partition_0);
1551         val64 |= (TX_FIFO_PARTITION_EN);
1552         writeq(val64, &bar0->tx_fifo_partition_0);
1553
1554         /* Filling the Rx round robin registers as per the
1555          * number of Rings and steering based on QoS with
1556          * equal priority.
1557          */
1558         switch (config->rx_ring_num) {
1559         case 1:
1560                 val64 = 0x0;
1561                 writeq(val64, &bar0->rx_w_round_robin_0);
1562                 writeq(val64, &bar0->rx_w_round_robin_1);
1563                 writeq(val64, &bar0->rx_w_round_robin_2);
1564                 writeq(val64, &bar0->rx_w_round_robin_3);
1565                 writeq(val64, &bar0->rx_w_round_robin_4);
1566
1567                 val64 = 0x8080808080808080ULL;
1568                 writeq(val64, &bar0->rts_qos_steering);
1569                 break;
1570         case 2:
1571                 val64 = 0x0001000100010001ULL;
1572                 writeq(val64, &bar0->rx_w_round_robin_0);
1573                 writeq(val64, &bar0->rx_w_round_robin_1);
1574                 writeq(val64, &bar0->rx_w_round_robin_2);
1575                 writeq(val64, &bar0->rx_w_round_robin_3);
1576                 val64 = 0x0001000100000000ULL;
1577                 writeq(val64, &bar0->rx_w_round_robin_4);
1578
1579                 val64 = 0x8080808040404040ULL;
1580                 writeq(val64, &bar0->rts_qos_steering);
1581                 break;
1582         case 3:
1583                 val64 = 0x0001020001020001ULL;
1584                 writeq(val64, &bar0->rx_w_round_robin_0);
1585                 val64 = 0x0200010200010200ULL;
1586                 writeq(val64, &bar0->rx_w_round_robin_1);
1587                 val64 = 0x0102000102000102ULL;
1588                 writeq(val64, &bar0->rx_w_round_robin_2);
1589                 val64 = 0x0001020001020001ULL;
1590                 writeq(val64, &bar0->rx_w_round_robin_3);
1591                 val64 = 0x0200010200000000ULL;
1592                 writeq(val64, &bar0->rx_w_round_robin_4);
1593
1594                 val64 = 0x8080804040402020ULL;
1595                 writeq(val64, &bar0->rts_qos_steering);
1596                 break;
1597         case 4:
1598                 val64 = 0x0001020300010203ULL;
1599                 writeq(val64, &bar0->rx_w_round_robin_0);
1600                 writeq(val64, &bar0->rx_w_round_robin_1);
1601                 writeq(val64, &bar0->rx_w_round_robin_2);
1602                 writeq(val64, &bar0->rx_w_round_robin_3);
1603                 val64 = 0x0001020300000000ULL;
1604                 writeq(val64, &bar0->rx_w_round_robin_4);
1605
1606                 val64 = 0x8080404020201010ULL;
1607                 writeq(val64, &bar0->rts_qos_steering);
1608                 break;
1609         case 5:
1610                 val64 = 0x0001020304000102ULL;
1611                 writeq(val64, &bar0->rx_w_round_robin_0);
1612                 val64 = 0x0304000102030400ULL;
1613                 writeq(val64, &bar0->rx_w_round_robin_1);
1614                 val64 = 0x0102030400010203ULL;
1615                 writeq(val64, &bar0->rx_w_round_robin_2);
1616                 val64 = 0x0400010203040001ULL;
1617                 writeq(val64, &bar0->rx_w_round_robin_3);
1618                 val64 = 0x0203040000000000ULL;
1619                 writeq(val64, &bar0->rx_w_round_robin_4);
1620
1621                 val64 = 0x8080404020201008ULL;
1622                 writeq(val64, &bar0->rts_qos_steering);
1623                 break;
1624         case 6:
1625                 val64 = 0x0001020304050001ULL;
1626                 writeq(val64, &bar0->rx_w_round_robin_0);
1627                 val64 = 0x0203040500010203ULL;
1628                 writeq(val64, &bar0->rx_w_round_robin_1);
1629                 val64 = 0x0405000102030405ULL;
1630                 writeq(val64, &bar0->rx_w_round_robin_2);
1631                 val64 = 0x0001020304050001ULL;
1632                 writeq(val64, &bar0->rx_w_round_robin_3);
1633                 val64 = 0x0203040500000000ULL;
1634                 writeq(val64, &bar0->rx_w_round_robin_4);
1635
1636                 val64 = 0x8080404020100804ULL;
1637                 writeq(val64, &bar0->rts_qos_steering);
1638                 break;
1639         case 7:
1640                 val64 = 0x0001020304050600ULL;
1641                 writeq(val64, &bar0->rx_w_round_robin_0);
1642                 val64 = 0x0102030405060001ULL;
1643                 writeq(val64, &bar0->rx_w_round_robin_1);
1644                 val64 = 0x0203040506000102ULL;
1645                 writeq(val64, &bar0->rx_w_round_robin_2);
1646                 val64 = 0x0304050600010203ULL;
1647                 writeq(val64, &bar0->rx_w_round_robin_3);
1648                 val64 = 0x0405060000000000ULL;
1649                 writeq(val64, &bar0->rx_w_round_robin_4);
1650
1651                 val64 = 0x8080402010080402ULL;
1652                 writeq(val64, &bar0->rts_qos_steering);
1653                 break;
1654         case 8:
1655                 val64 = 0x0001020304050607ULL;
1656                 writeq(val64, &bar0->rx_w_round_robin_0);
1657                 writeq(val64, &bar0->rx_w_round_robin_1);
1658                 writeq(val64, &bar0->rx_w_round_robin_2);
1659                 writeq(val64, &bar0->rx_w_round_robin_3);
1660                 val64 = 0x0001020300000000ULL;
1661                 writeq(val64, &bar0->rx_w_round_robin_4);
1662
1663                 val64 = 0x8040201008040201ULL;
1664                 writeq(val64, &bar0->rts_qos_steering);
1665                 break;
1666         }
1667
1668         /* UDP Fix */
1669         val64 = 0;
1670         for (i = 0; i < 8; i++)
1671                 writeq(val64, &bar0->rts_frm_len_n[i]);
1672
1673         /* Set the default rts frame length for the rings configured */
1674         val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
1675         for (i = 0 ; i < config->rx_ring_num ; i++)
1676                 writeq(val64, &bar0->rts_frm_len_n[i]);
1677
1678         /* Set the frame length for the configured rings
1679          * desired by the user
1680          */
1681         for (i = 0; i < config->rx_ring_num; i++) {
1682                 /* If rts_frm_len[i] == 0 then it is assumed that user not
1683                  * specified frame length steering.
1684                  * If the user provides the frame length then program
1685                  * the rts_frm_len register for those values or else
1686                  * leave it as it is.
1687                  */
1688                 if (rts_frm_len[i] != 0) {
1689                         writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
1690                                 &bar0->rts_frm_len_n[i]);
1691                 }
1692         }
1693
1694         /* Disable differentiated services steering logic */
1695         for (i = 0; i < 64; i++) {
1696                 if (rts_ds_steer(nic, i, 0) == FAILURE) {
1697                         DBG_PRINT(ERR_DBG, "%s: failed rts ds steering",
1698                                 dev->name);
1699                         DBG_PRINT(ERR_DBG, "set on codepoint %d\n", i);
1700                         return -ENODEV;
1701                 }
1702         }
1703
1704         /* Program statistics memory */
1705         writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
1706
1707         if (nic->device_type == XFRAME_II_DEVICE) {
1708                 val64 = STAT_BC(0x320);
1709                 writeq(val64, &bar0->stat_byte_cnt);
1710         }
1711
1712         /*
1713          * Initializing the sampling rate for the device to calculate the
1714          * bandwidth utilization.
1715          */
1716         val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
1717             MAC_RX_LINK_UTIL_VAL(rmac_util_period);
1718         writeq(val64, &bar0->mac_link_util);
1719
1720         /*
1721          * Initializing the Transmit and Receive Traffic Interrupt
1722          * Scheme.
1723          */
1724
1725         /* Initialize TTI */
1726         if (SUCCESS != init_tti(nic, nic->last_link_state))
1727                 return -ENODEV;
1728
1729         /* RTI Initialization */
1730         if (nic->device_type == XFRAME_II_DEVICE) {
1731                 /*
1732                  * Programmed to generate Apprx 500 Intrs per
1733                  * second
1734                  */
1735                 int count = (nic->config.bus_speed * 125)/4;
1736                 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
1737         } else
1738                 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
1739         val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
1740                  RTI_DATA1_MEM_RX_URNG_B(0x10) |
1741                  RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
1742
1743         writeq(val64, &bar0->rti_data1_mem);
1744
1745         val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
1746                 RTI_DATA2_MEM_RX_UFC_B(0x2) ;
1747         if (nic->config.intr_type == MSI_X)
1748             val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
1749                         RTI_DATA2_MEM_RX_UFC_D(0x40));
1750         else
1751             val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
1752                         RTI_DATA2_MEM_RX_UFC_D(0x80));
1753         writeq(val64, &bar0->rti_data2_mem);
1754
1755         for (i = 0; i < config->rx_ring_num; i++) {
1756                 val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
1757                                 | RTI_CMD_MEM_OFFSET(i);
1758                 writeq(val64, &bar0->rti_command_mem);
1759
1760                 /*
1761                  * Once the operation completes, the Strobe bit of the
1762                  * command register will be reset. We poll for this
1763                  * particular condition. We wait for a maximum of 500ms
1764                  * for the operation to complete, if it's not complete
1765                  * by then we return error.
1766                  */
1767                 time = 0;
1768                 while (TRUE) {
1769                         val64 = readq(&bar0->rti_command_mem);
1770                         if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
1771                                 break;
1772
1773                         if (time > 10) {
1774                                 DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
1775                                           dev->name);
1776                                 return -ENODEV;
1777                         }
1778                         time++;
1779                         msleep(50);
1780                 }
1781         }
1782
1783         /*
1784          * Initializing proper values as Pause threshold into all
1785          * the 8 Queues on Rx side.
1786          */
1787         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
1788         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
1789
1790         /* Disable RMAC PAD STRIPPING */
1791         add = &bar0->mac_cfg;
1792         val64 = readq(&bar0->mac_cfg);
1793         val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
1794         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1795         writel((u32) (val64), add);
1796         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1797         writel((u32) (val64 >> 32), (add + 4));
1798         val64 = readq(&bar0->mac_cfg);
1799
1800         /* Enable FCS stripping by adapter */
1801         add = &bar0->mac_cfg;
1802         val64 = readq(&bar0->mac_cfg);
1803         val64 |= MAC_CFG_RMAC_STRIP_FCS;
1804         if (nic->device_type == XFRAME_II_DEVICE)
1805                 writeq(val64, &bar0->mac_cfg);
1806         else {
1807                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1808                 writel((u32) (val64), add);
1809                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1810                 writel((u32) (val64 >> 32), (add + 4));
1811         }
1812
1813         /*
1814          * Set the time value to be inserted in the pause frame
1815          * generated by xena.
1816          */
1817         val64 = readq(&bar0->rmac_pause_cfg);
1818         val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
1819         val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
1820         writeq(val64, &bar0->rmac_pause_cfg);
1821
1822         /*
1823          * Set the Threshold Limit for Generating the pause frame
1824          * If the amount of data in any Queue exceeds ratio of
1825          * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
1826          * pause frame is generated
1827          */
1828         val64 = 0;
1829         for (i = 0; i < 4; i++) {
1830                 val64 |=
1831                     (((u64) 0xFF00 | nic->mac_control.
1832                       mc_pause_threshold_q0q3)
1833                      << (i * 2 * 8));
1834         }
1835         writeq(val64, &bar0->mc_pause_thresh_q0q3);
1836
1837         val64 = 0;
1838         for (i = 0; i < 4; i++) {
1839                 val64 |=
1840                     (((u64) 0xFF00 | nic->mac_control.
1841                       mc_pause_threshold_q4q7)
1842                      << (i * 2 * 8));
1843         }
1844         writeq(val64, &bar0->mc_pause_thresh_q4q7);
1845
1846         /*
1847          * TxDMA will stop Read request if the number of read split has
1848          * exceeded the limit pointed by shared_splits
1849          */
1850         val64 = readq(&bar0->pic_control);
1851         val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
1852         writeq(val64, &bar0->pic_control);
1853
1854         if (nic->config.bus_speed == 266) {
1855                 writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout);
1856                 writeq(0x0, &bar0->read_retry_delay);
1857                 writeq(0x0, &bar0->write_retry_delay);
1858         }
1859
1860         /*
1861          * Programming the Herc to split every write transaction
1862          * that does not start on an ADB to reduce disconnects.
1863          */
1864         if (nic->device_type == XFRAME_II_DEVICE) {
1865                 val64 = FAULT_BEHAVIOUR | EXT_REQ_EN |
1866                         MISC_LINK_STABILITY_PRD(3);
1867                 writeq(val64, &bar0->misc_control);
1868                 val64 = readq(&bar0->pic_control2);
1869                 val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15));
1870                 writeq(val64, &bar0->pic_control2);
1871         }
1872         if (strstr(nic->product_name, "CX4")) {
1873                 val64 = TMAC_AVG_IPG(0x17);
1874                 writeq(val64, &bar0->tmac_avg_ipg);
1875         }
1876
1877         return SUCCESS;
1878 }
1879 #define LINK_UP_DOWN_INTERRUPT          1
1880 #define MAC_RMAC_ERR_TIMER              2
1881
1882 static int s2io_link_fault_indication(struct s2io_nic *nic)
1883 {
1884         if (nic->device_type == XFRAME_II_DEVICE)
1885                 return LINK_UP_DOWN_INTERRUPT;
1886         else
1887                 return MAC_RMAC_ERR_TIMER;
1888 }
1889
1890 /**
1891  *  do_s2io_write_bits -  update alarm bits in alarm register
1892  *  @value: alarm bits
1893  *  @flag: interrupt status
1894  *  @addr: address value
1895  *  Description: update alarm bits in alarm register
1896  *  Return Value:
1897  *  NONE.
1898  */
1899 static void do_s2io_write_bits(u64 value, int flag, void __iomem *addr)
1900 {
1901         u64 temp64;
1902
1903         temp64 = readq(addr);
1904
1905         if(flag == ENABLE_INTRS)
1906                 temp64 &= ~((u64) value);
1907         else
1908                 temp64 |= ((u64) value);
1909         writeq(temp64, addr);
1910 }
1911
1912 static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag)
1913 {
1914         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1915         register u64 gen_int_mask = 0;
1916         u64 interruptible;
1917
1918         writeq(DISABLE_ALL_INTRS, &bar0->general_int_mask);
1919         if (mask & TX_DMA_INTR) {
1920
1921                 gen_int_mask |= TXDMA_INT_M;
1922
1923                 do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT |
1924                                 TXDMA_PCC_INT | TXDMA_TTI_INT |
1925                                 TXDMA_LSO_INT | TXDMA_TPA_INT |
1926                                 TXDMA_SM_INT, flag, &bar0->txdma_int_mask);
1927
1928                 do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
1929                                 PFC_MISC_0_ERR | PFC_MISC_1_ERR |
1930                                 PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag,
1931                                 &bar0->pfc_err_mask);
1932
1933                 do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
1934                                 TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR |
1935                                 TDA_PCIX_ERR, flag, &bar0->tda_err_mask);
1936
1937                 do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR |
1938                                 PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
1939                                 PCC_N_SERR | PCC_6_COF_OV_ERR |
1940                                 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
1941                                 PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR |
1942                                 PCC_TXB_ECC_SG_ERR, flag, &bar0->pcc_err_mask);
1943
1944                 do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR |
1945                                 TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask);
1946
1947                 do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT |
1948                                 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM |
1949                                 LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
1950                                 flag, &bar0->lso_err_mask);
1951
1952                 do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP,
1953                                 flag, &bar0->tpa_err_mask);
1954
1955                 do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask);
1956
1957         }
1958
1959         if (mask & TX_MAC_INTR) {
1960                 gen_int_mask |= TXMAC_INT_M;
1961                 do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag,
1962                                 &bar0->mac_int_mask);
1963                 do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR |
1964                                 TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
1965                                 TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
1966                                 flag, &bar0->mac_tmac_err_mask);
1967         }
1968
1969         if (mask & TX_XGXS_INTR) {
1970                 gen_int_mask |= TXXGXS_INT_M;
1971                 do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag,
1972                                 &bar0->xgxs_int_mask);
1973                 do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR |
1974                                 TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
1975                                 flag, &bar0->xgxs_txgxs_err_mask);
1976         }
1977
1978         if (mask & RX_DMA_INTR) {
1979                 gen_int_mask |= RXDMA_INT_M;
1980                 do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M |
1981                                 RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M,
1982                                 flag, &bar0->rxdma_int_mask);
1983                 do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR |
1984                                 RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM |
1985                                 RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR |
1986                                 RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask);
1987                 do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn |
1988                                 PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn |
1989                                 PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag,
1990                                 &bar0->prc_pcix_err_mask);
1991                 do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR |
1992                                 RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag,
1993                                 &bar0->rpa_err_mask);
1994                 do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR |
1995                                 RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM |
1996                                 RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR |
1997                                 RDA_FRM_ECC_SG_ERR | RDA_MISC_ERR|RDA_PCIX_ERR,
1998                                 flag, &bar0->rda_err_mask);
1999                 do_s2io_write_bits(RTI_SM_ERR_ALARM |
2000                                 RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
2001                                 flag, &bar0->rti_err_mask);
2002         }
2003
2004         if (mask & RX_MAC_INTR) {
2005                 gen_int_mask |= RXMAC_INT_M;
2006                 do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag,
2007                                 &bar0->mac_int_mask);
2008                 interruptible = RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR |
2009                                 RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR |
2010                                 RMAC_DOUBLE_ECC_ERR;
2011                 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER)
2012                         interruptible |= RMAC_LINK_STATE_CHANGE_INT;
2013                 do_s2io_write_bits(interruptible,
2014                                 flag, &bar0->mac_rmac_err_mask);
2015         }
2016
2017         if (mask & RX_XGXS_INTR)
2018         {
2019                 gen_int_mask |= RXXGXS_INT_M;
2020                 do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag,
2021                                 &bar0->xgxs_int_mask);
2022                 do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag,
2023                                 &bar0->xgxs_rxgxs_err_mask);
2024         }
2025
2026         if (mask & MC_INTR) {
2027                 gen_int_mask |= MC_INT_M;
2028                 do_s2io_write_bits(MC_INT_MASK_MC_INT, flag, &bar0->mc_int_mask);
2029                 do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG |
2030                                 MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag,
2031                                 &bar0->mc_err_mask);
2032         }
2033         nic->general_int_mask = gen_int_mask;
2034
2035         /* Remove this line when alarm interrupts are enabled */
2036         nic->general_int_mask = 0;
2037 }
2038 /**
2039  *  en_dis_able_nic_intrs - Enable or Disable the interrupts
2040  *  @nic: device private variable,
2041  *  @mask: A mask indicating which Intr block must be modified and,
2042  *  @flag: A flag indicating whether to enable or disable the Intrs.
2043  *  Description: This function will either disable or enable the interrupts
2044  *  depending on the flag argument. The mask argument can be used to
2045  *  enable/disable any Intr block.
2046  *  Return Value: NONE.
2047  */
2048
2049 static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
2050 {
2051         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2052         register u64 temp64 = 0, intr_mask = 0;
2053
2054         intr_mask = nic->general_int_mask;
2055
2056         /*  Top level interrupt classification */
2057         /*  PIC Interrupts */
2058         if (mask & TX_PIC_INTR) {
2059                 /*  Enable PIC Intrs in the general intr mask register */
2060                 intr_mask |= TXPIC_INT_M;
2061                 if (flag == ENABLE_INTRS) {
2062                         /*
2063                          * If Hercules adapter enable GPIO otherwise
2064                          * disable all PCIX, Flash, MDIO, IIC and GPIO
2065                          * interrupts for now.
2066                          * TODO
2067                          */
2068                         if (s2io_link_fault_indication(nic) ==
2069                                         LINK_UP_DOWN_INTERRUPT ) {
2070                                 do_s2io_write_bits(PIC_INT_GPIO, flag,
2071                                                 &bar0->pic_int_mask);
2072                                 do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag,
2073                                                 &bar0->gpio_int_mask);
2074                         } else
2075                                 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2076                 } else if (flag == DISABLE_INTRS) {
2077                         /*
2078                          * Disable PIC Intrs in the general
2079                          * intr mask register
2080                          */
2081                         writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2082                 }
2083         }
2084
2085         /*  Tx traffic interrupts */
2086         if (mask & TX_TRAFFIC_INTR) {
2087                 intr_mask |= TXTRAFFIC_INT_M;
2088                 if (flag == ENABLE_INTRS) {
2089                         /*
2090                          * Enable all the Tx side interrupts
2091                          * writing 0 Enables all 64 TX interrupt levels
2092                          */
2093                         writeq(0x0, &bar0->tx_traffic_mask);
2094                 } else if (flag == DISABLE_INTRS) {
2095                         /*
2096                          * Disable Tx Traffic Intrs in the general intr mask
2097                          * register.
2098                          */
2099                         writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
2100                 }
2101         }
2102
2103         /*  Rx traffic interrupts */
2104         if (mask & RX_TRAFFIC_INTR) {
2105                 intr_mask |= RXTRAFFIC_INT_M;
2106                 if (flag == ENABLE_INTRS) {
2107                         /* writing 0 Enables all 8 RX interrupt levels */
2108                         writeq(0x0, &bar0->rx_traffic_mask);
2109                 } else if (flag == DISABLE_INTRS) {
2110                         /*
2111                          * Disable Rx Traffic Intrs in the general intr mask
2112                          * register.
2113                          */
2114                         writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
2115                 }
2116         }
2117
2118         temp64 = readq(&bar0->general_int_mask);
2119         if (flag == ENABLE_INTRS)
2120                 temp64 &= ~((u64) intr_mask);
2121         else
2122                 temp64 = DISABLE_ALL_INTRS;
2123         writeq(temp64, &bar0->general_int_mask);
2124
2125         nic->general_int_mask = readq(&bar0->general_int_mask);
2126 }
2127
2128 /**
2129  *  verify_pcc_quiescent- Checks for PCC quiescent state
2130  *  Return: 1 If PCC is quiescence
2131  *          0 If PCC is not quiescence
2132  */
2133 static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
2134 {
2135         int ret = 0, herc;
2136         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2137         u64 val64 = readq(&bar0->adapter_status);
2138
2139         herc = (sp->device_type == XFRAME_II_DEVICE);
2140
2141         if (flag == FALSE) {
2142                 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2143                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
2144                                 ret = 1;
2145                 } else {
2146                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2147                                 ret = 1;
2148                 }
2149         } else {
2150                 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2151                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
2152                              ADAPTER_STATUS_RMAC_PCC_IDLE))
2153                                 ret = 1;
2154                 } else {
2155                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
2156                              ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2157                                 ret = 1;
2158                 }
2159         }
2160
2161         return ret;
2162 }
2163 /**
2164  *  verify_xena_quiescence - Checks whether the H/W is ready
2165  *  Description: Returns whether the H/W is ready to go or not. Depending
2166  *  on whether adapter enable bit was written or not the comparison
2167  *  differs and the calling function passes the input argument flag to
2168  *  indicate this.
2169  *  Return: 1 If xena is quiescence
2170  *          0 If Xena is not quiescence
2171  */
2172
2173 static int verify_xena_quiescence(struct s2io_nic *sp)
2174 {
2175         int  mode;
2176         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2177         u64 val64 = readq(&bar0->adapter_status);
2178         mode = s2io_verify_pci_mode(sp);
2179
2180         if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
2181                 DBG_PRINT(ERR_DBG, "%s", "TDMA is not ready!");
2182                 return 0;
2183         }
2184         if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
2185         DBG_PRINT(ERR_DBG, "%s", "RDMA is not ready!");
2186                 return 0;
2187         }
2188         if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
2189                 DBG_PRINT(ERR_DBG, "%s", "PFC is not ready!");
2190                 return 0;
2191         }
2192         if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
2193                 DBG_PRINT(ERR_DBG, "%s", "TMAC BUF is not empty!");
2194                 return 0;
2195         }
2196         if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
2197                 DBG_PRINT(ERR_DBG, "%s", "PIC is not QUIESCENT!");
2198                 return 0;
2199         }
2200         if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
2201                 DBG_PRINT(ERR_DBG, "%s", "MC_DRAM is not ready!");
2202                 return 0;
2203         }
2204         if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
2205                 DBG_PRINT(ERR_DBG, "%s", "MC_QUEUES is not ready!");
2206                 return 0;
2207         }
2208         if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
2209                 DBG_PRINT(ERR_DBG, "%s", "M_PLL is not locked!");
2210                 return 0;
2211         }
2212
2213         /*
2214          * In PCI 33 mode, the P_PLL is not used, and therefore,
2215          * the the P_PLL_LOCK bit in the adapter_status register will
2216          * not be asserted.
2217          */
2218         if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
2219                 sp->device_type == XFRAME_II_DEVICE && mode !=
2220                 PCI_MODE_PCI_33) {
2221                 DBG_PRINT(ERR_DBG, "%s", "P_PLL is not locked!");
2222                 return 0;
2223         }
2224         if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
2225                         ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
2226                 DBG_PRINT(ERR_DBG, "%s", "RC_PRC is not QUIESCENT!");
2227                 return 0;
2228         }
2229         return 1;
2230 }
2231
2232 /**
2233  * fix_mac_address -  Fix for Mac addr problem on Alpha platforms
2234  * @sp: Pointer to device specifc structure
2235  * Description :
2236  * New procedure to clear mac address reading  problems on Alpha platforms
2237  *
2238  */
2239
2240 static void fix_mac_address(struct s2io_nic * sp)
2241 {
2242         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2243         u64 val64;
2244         int i = 0;
2245
2246         while (fix_mac[i] != END_SIGN) {
2247                 writeq(fix_mac[i++], &bar0->gpio_control);
2248                 udelay(10);
2249                 val64 = readq(&bar0->gpio_control);
2250         }
2251 }
2252
2253 /**
2254  *  start_nic - Turns the device on
2255  *  @nic : device private variable.
2256  *  Description:
2257  *  This function actually turns the device on. Before this  function is
2258  *  called,all Registers are configured from their reset states
2259  *  and shared memory is allocated but the NIC is still quiescent. On
2260  *  calling this function, the device interrupts are cleared and the NIC is
2261  *  literally switched on by writing into the adapter control register.
2262  *  Return Value:
2263  *  SUCCESS on success and -1 on failure.
2264  */
2265
2266 static int start_nic(struct s2io_nic *nic)
2267 {
2268         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2269         struct net_device *dev = nic->dev;
2270         register u64 val64 = 0;
2271         u16 subid, i;
2272         struct mac_info *mac_control;
2273         struct config_param *config;
2274
2275         mac_control = &nic->mac_control;
2276         config = &nic->config;
2277
2278         /*  PRC Initialization and configuration */
2279         for (i = 0; i < config->rx_ring_num; i++) {
2280                 writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
2281                        &bar0->prc_rxd0_n[i]);
2282
2283                 val64 = readq(&bar0->prc_ctrl_n[i]);
2284                 if (nic->rxd_mode == RXD_MODE_1)
2285                         val64 |= PRC_CTRL_RC_ENABLED;
2286                 else
2287                         val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
2288                 if (nic->device_type == XFRAME_II_DEVICE)
2289                         val64 |= PRC_CTRL_GROUP_READS;
2290                 val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
2291                 val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
2292                 writeq(val64, &bar0->prc_ctrl_n[i]);
2293         }
2294
2295         if (nic->rxd_mode == RXD_MODE_3B) {
2296                 /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
2297                 val64 = readq(&bar0->rx_pa_cfg);
2298                 val64 |= RX_PA_CFG_IGNORE_L2_ERR;
2299                 writeq(val64, &bar0->rx_pa_cfg);
2300         }
2301
2302         if (vlan_tag_strip == 0) {
2303                 val64 = readq(&bar0->rx_pa_cfg);
2304                 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
2305                 writeq(val64, &bar0->rx_pa_cfg);
2306                 vlan_strip_flag = 0;
2307         }
2308
2309         /*
2310          * Enabling MC-RLDRAM. After enabling the device, we timeout
2311          * for around 100ms, which is approximately the time required
2312          * for the device to be ready for operation.
2313          */
2314         val64 = readq(&bar0->mc_rldram_mrs);
2315         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
2316         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
2317         val64 = readq(&bar0->mc_rldram_mrs);
2318
2319         msleep(100);    /* Delay by around 100 ms. */
2320
2321         /* Enabling ECC Protection. */
2322         val64 = readq(&bar0->adapter_control);
2323         val64 &= ~ADAPTER_ECC_EN;
2324         writeq(val64, &bar0->adapter_control);
2325
2326         /*
2327          * Verify if the device is ready to be enabled, if so enable
2328          * it.
2329          */
2330         val64 = readq(&bar0->adapter_status);
2331         if (!verify_xena_quiescence(nic)) {
2332                 DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
2333                 DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
2334                           (unsigned long long) val64);
2335                 return FAILURE;
2336         }
2337
2338         /*
2339          * With some switches, link might be already up at this point.
2340          * Because of this weird behavior, when we enable laser,
2341          * we may not get link. We need to handle this. We cannot
2342          * figure out which switch is misbehaving. So we are forced to
2343          * make a global change.
2344          */
2345
2346         /* Enabling Laser. */
2347         val64 = readq(&bar0->adapter_control);
2348         val64 |= ADAPTER_EOI_TX_ON;
2349         writeq(val64, &bar0->adapter_control);
2350
2351         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
2352                 /*
2353                  * Dont see link state interrupts initally on some switches,
2354                  * so directly scheduling the link state task here.
2355                  */
2356                 schedule_work(&nic->set_link_task);
2357         }
2358         /* SXE-002: Initialize link and activity LED */
2359         subid = nic->pdev->subsystem_device;
2360         if (((subid & 0xFF) >= 0x07) &&
2361             (nic->device_type == XFRAME_I_DEVICE)) {
2362                 val64 = readq(&bar0->gpio_control);
2363                 val64 |= 0x0000800000000000ULL;
2364                 writeq(val64, &bar0->gpio_control);
2365                 val64 = 0x0411040400000000ULL;
2366                 writeq(val64, (void __iomem *)bar0 + 0x2700);
2367         }
2368
2369         return SUCCESS;
2370 }
2371 /**
2372  * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
2373  */
2374 static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, struct \
2375                                         TxD *txdlp, int get_off)
2376 {
2377         struct s2io_nic *nic = fifo_data->nic;
2378         struct sk_buff *skb;
2379         struct TxD *txds;
2380         u16 j, frg_cnt;
2381
2382         txds = txdlp;
2383         if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) {
2384                 pci_unmap_single(nic->pdev, (dma_addr_t)
2385                         txds->Buffer_Pointer, sizeof(u64),
2386                         PCI_DMA_TODEVICE);
2387                 txds++;
2388         }
2389
2390         skb = (struct sk_buff *) ((unsigned long)
2391                         txds->Host_Control);
2392         if (!skb) {
2393                 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
2394                 return NULL;
2395         }
2396         pci_unmap_single(nic->pdev, (dma_addr_t)
2397                          txds->Buffer_Pointer,
2398                          skb->len - skb->data_len,
2399                          PCI_DMA_TODEVICE);
2400         frg_cnt = skb_shinfo(skb)->nr_frags;
2401         if (frg_cnt) {
2402                 txds++;
2403                 for (j = 0; j < frg_cnt; j++, txds++) {
2404                         skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
2405                         if (!txds->Buffer_Pointer)
2406                                 break;
2407                         pci_unmap_page(nic->pdev, (dma_addr_t)
2408                                         txds->Buffer_Pointer,
2409                                        frag->size, PCI_DMA_TODEVICE);
2410                 }
2411         }
2412         memset(txdlp,0, (sizeof(struct TxD) * fifo_data->max_txds));
2413         return(skb);
2414 }
2415
2416 /**
2417  *  free_tx_buffers - Free all queued Tx buffers
2418  *  @nic : device private variable.
2419  *  Description:
2420  *  Free all queued Tx buffers.
2421  *  Return Value: void
2422 */
2423
2424 static void free_tx_buffers(struct s2io_nic *nic)
2425 {
2426         struct net_device *dev = nic->dev;
2427         struct sk_buff *skb;
2428         struct TxD *txdp;
2429         int i, j;
2430         struct mac_info *mac_control;
2431         struct config_param *config;
2432         int cnt = 0;
2433
2434         mac_control = &nic->mac_control;
2435         config = &nic->config;
2436
2437         for (i = 0; i < config->tx_fifo_num; i++) {
2438                 unsigned long flags;
2439                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags);
2440                 for (j = 0; j < config->tx_cfg[i].fifo_len; j++) {
2441                         txdp = (struct TxD *) \
2442                         mac_control->fifos[i].list_info[j].list_virt_addr;
2443                         skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
2444                         if (skb) {
2445                                 nic->mac_control.stats_info->sw_stat.mem_freed
2446                                         += skb->truesize;
2447                                 dev_kfree_skb(skb);
2448                                 cnt++;
2449                         }
2450                 }
2451                 DBG_PRINT(INTR_DBG,
2452                           "%s:forcibly freeing %d skbs on FIFO%d\n",
2453                           dev->name, cnt, i);
2454                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
2455                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
2456                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock, flags);
2457         }
2458 }
2459
2460 /**
2461  *   stop_nic -  To stop the nic
2462  *   @nic ; device private variable.
2463  *   Description:
2464  *   This function does exactly the opposite of what the start_nic()
2465  *   function does. This function is called to stop the device.
2466  *   Return Value:
2467  *   void.
2468  */
2469
2470 static void stop_nic(struct s2io_nic *nic)
2471 {
2472         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2473         register u64 val64 = 0;
2474         u16 interruptible;
2475         struct mac_info *mac_control;
2476         struct config_param *config;
2477
2478         mac_control = &nic->mac_control;
2479         config = &nic->config;
2480
2481         /*  Disable all interrupts */
2482         en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS);
2483         interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
2484         interruptible |= TX_PIC_INTR;
2485         en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
2486
2487         /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
2488         val64 = readq(&bar0->adapter_control);
2489         val64 &= ~(ADAPTER_CNTL_EN);
2490         writeq(val64, &bar0->adapter_control);
2491 }
2492
2493 /**
2494  *  fill_rx_buffers - Allocates the Rx side skbs
2495  *  @ring_info: per ring structure
2496  *  @from_card_up: If this is true, we will map the buffer to get
2497  *     the dma address for buf0 and buf1 to give it to the card.
2498  *     Else we will sync the already mapped buffer to give it to the card.
2499  *  Description:
2500  *  The function allocates Rx side skbs and puts the physical
2501  *  address of these buffers into the RxD buffer pointers, so that the NIC
2502  *  can DMA the received frame into these locations.
2503  *  The NIC supports 3 receive modes, viz
2504  *  1. single buffer,
2505  *  2. three buffer and
2506  *  3. Five buffer modes.
2507  *  Each mode defines how many fragments the received frame will be split
2508  *  up into by the NIC. The frame is split into L3 header, L4 Header,
2509  *  L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
2510  *  is split into 3 fragments. As of now only single buffer mode is
2511  *  supported.
2512  *   Return Value:
2513  *  SUCCESS on success or an appropriate -ve value on failure.
2514  */
2515 static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring,
2516                                 int from_card_up)
2517 {
2518         struct sk_buff *skb;
2519         struct RxD_t *rxdp;
2520         int off, size, block_no, block_no1;
2521         u32 alloc_tab = 0;
2522         u32 alloc_cnt;
2523         u64 tmp;
2524         struct buffAdd *ba;
2525         struct RxD_t *first_rxdp = NULL;
2526         u64 Buffer0_ptr = 0, Buffer1_ptr = 0;
2527         int rxd_index = 0;
2528         struct RxD1 *rxdp1;
2529         struct RxD3 *rxdp3;
2530         struct swStat *stats = &ring->nic->mac_control.stats_info->sw_stat;
2531
2532         alloc_cnt = ring->pkt_cnt - ring->rx_bufs_left;
2533
2534         block_no1 = ring->rx_curr_get_info.block_index;
2535         while (alloc_tab < alloc_cnt) {
2536                 block_no = ring->rx_curr_put_info.block_index;
2537
2538                 off = ring->rx_curr_put_info.offset;
2539
2540                 rxdp = ring->rx_blocks[block_no].rxds[off].virt_addr;
2541
2542                 rxd_index = off + 1;
2543                 if (block_no)
2544                         rxd_index += (block_no * ring->rxd_count);
2545
2546                 if ((block_no == block_no1) &&
2547                         (off == ring->rx_curr_get_info.offset) &&
2548                         (rxdp->Host_Control)) {
2549                         DBG_PRINT(INTR_DBG, "%s: Get and Put",
2550                                 ring->dev->name);
2551                         DBG_PRINT(INTR_DBG, " info equated\n");
2552                         goto end;
2553                 }
2554                 if (off && (off == ring->rxd_count)) {
2555                         ring->rx_curr_put_info.block_index++;
2556                         if (ring->rx_curr_put_info.block_index ==
2557                                                         ring->block_count)
2558                                 ring->rx_curr_put_info.block_index = 0;
2559                         block_no = ring->rx_curr_put_info.block_index;
2560                         off = 0;
2561                         ring->rx_curr_put_info.offset = off;
2562                         rxdp = ring->rx_blocks[block_no].block_virt_addr;
2563                         DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
2564                                   ring->dev->name, rxdp);
2565
2566                 }
2567
2568                 if ((rxdp->Control_1 & RXD_OWN_XENA) &&
2569                         ((ring->rxd_mode == RXD_MODE_3B) &&
2570                                 (rxdp->Control_2 & s2BIT(0)))) {
2571                         ring->rx_curr_put_info.offset = off;
2572                         goto end;
2573                 }
2574                 /* calculate size of skb based on ring mode */
2575                 size = ring->mtu + HEADER_ETHERNET_II_802_3_SIZE +
2576                                 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
2577                 if (ring->rxd_mode == RXD_MODE_1)
2578                         size += NET_IP_ALIGN;
2579                 else
2580                         size = ring->mtu + ALIGN_SIZE + BUF0_LEN + 4;
2581
2582                 /* allocate skb */
2583                 skb = dev_alloc_skb(size);
2584                 if(!skb) {
2585                         DBG_PRINT(INFO_DBG, "%s: Out of ", ring->dev->name);
2586                         DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
2587                         if (first_rxdp) {
2588                                 wmb();
2589                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2590                         }
2591                         stats->mem_alloc_fail_cnt++;
2592
2593                         return -ENOMEM ;
2594                 }
2595                 stats->mem_allocated += skb->truesize;
2596
2597                 if (ring->rxd_mode == RXD_MODE_1) {
2598                         /* 1 buffer mode - normal operation mode */
2599                         rxdp1 = (struct RxD1*)rxdp;
2600                         memset(rxdp, 0, sizeof(struct RxD1));
2601                         skb_reserve(skb, NET_IP_ALIGN);
2602                         rxdp1->Buffer0_ptr = pci_map_single
2603                             (ring->pdev, skb->data, size - NET_IP_ALIGN,
2604                                 PCI_DMA_FROMDEVICE);
2605                         if (pci_dma_mapping_error(nic->pdev,
2606                                                 rxdp1->Buffer0_ptr))
2607                                 goto pci_map_failed;
2608
2609                         rxdp->Control_2 =
2610                                 SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
2611                         rxdp->Host_Control = (unsigned long) (skb);
2612                 } else if (ring->rxd_mode == RXD_MODE_3B) {
2613                         /*
2614                          * 2 buffer mode -
2615                          * 2 buffer mode provides 128
2616                          * byte aligned receive buffers.
2617                          */
2618
2619                         rxdp3 = (struct RxD3*)rxdp;
2620                         /* save buffer pointers to avoid frequent dma mapping */
2621                         Buffer0_ptr = rxdp3->Buffer0_ptr;
2622                         Buffer1_ptr = rxdp3->Buffer1_ptr;
2623                         memset(rxdp, 0, sizeof(struct RxD3));
2624                         /* restore the buffer pointers for dma sync*/
2625                         rxdp3->Buffer0_ptr = Buffer0_ptr;
2626                         rxdp3->Buffer1_ptr = Buffer1_ptr;
2627
2628                         ba = &ring->ba[block_no][off];
2629                         skb_reserve(skb, BUF0_LEN);
2630                         tmp = (u64)(unsigned long) skb->data;
2631                         tmp += ALIGN_SIZE;
2632                         tmp &= ~ALIGN_SIZE;
2633                         skb->data = (void *) (unsigned long)tmp;
2634                         skb_reset_tail_pointer(skb);
2635
2636                         if (from_card_up) {
2637                                 rxdp3->Buffer0_ptr =
2638                                    pci_map_single(ring->pdev, ba->ba_0,
2639                                         BUF0_LEN, PCI_DMA_FROMDEVICE);
2640                         if (pci_dma_mapping_error(nic->pdev,
2641                                                 rxdp3->Buffer0_ptr))
2642                                         goto pci_map_failed;
2643                         } else
2644                                 pci_dma_sync_single_for_device(ring->pdev,
2645                                 (dma_addr_t) rxdp3->Buffer0_ptr,
2646                                     BUF0_LEN, PCI_DMA_FROMDEVICE);
2647
2648                         rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
2649                         if (ring->rxd_mode == RXD_MODE_3B) {
2650                                 /* Two buffer mode */
2651
2652                                 /*
2653                                  * Buffer2 will have L3/L4 header plus
2654                                  * L4 payload
2655                                  */
2656                                 rxdp3->Buffer2_ptr = pci_map_single
2657                                 (ring->pdev, skb->data, ring->mtu + 4,
2658                                                 PCI_DMA_FROMDEVICE);
2659
2660                                 if (pci_dma_mapping_error(nic->pdev,
2661                                                         rxdp3->Buffer2_ptr))
2662                                         goto pci_map_failed;
2663
2664                                 if (from_card_up) {
2665                                         rxdp3->Buffer1_ptr =
2666                                                 pci_map_single(ring->pdev,
2667                                                 ba->ba_1, BUF1_LEN,
2668                                                 PCI_DMA_FROMDEVICE);
2669
2670                                         if (pci_dma_mapping_error(nic->pdev,
2671                                                 rxdp3->Buffer1_ptr)) {
2672                                                 pci_unmap_single
2673                                                         (ring->pdev,
2674                                                     (dma_addr_t)(unsigned long)
2675                                                         skb->data,
2676                                                         ring->mtu + 4,
2677                                                         PCI_DMA_FROMDEVICE);
2678                                                 goto pci_map_failed;
2679                                         }
2680                                 }
2681                                 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
2682                                 rxdp->Control_2 |= SET_BUFFER2_SIZE_3
2683                                                                 (ring->mtu + 4);
2684                         }
2685                         rxdp->Control_2 |= s2BIT(0);
2686                         rxdp->Host_Control = (unsigned long) (skb);
2687                 }
2688                 if (alloc_tab & ((1 << rxsync_frequency) - 1))
2689                         rxdp->Control_1 |= RXD_OWN_XENA;
2690                 off++;
2691                 if (off == (ring->rxd_count + 1))
2692                         off = 0;
2693                 ring->rx_curr_put_info.offset = off;
2694
2695                 rxdp->Control_2 |= SET_RXD_MARKER;
2696                 if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
2697                         if (first_rxdp) {
2698                                 wmb();
2699                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2700                         }
2701                         first_rxdp = rxdp;
2702                 }
2703                 ring->rx_bufs_left += 1;
2704                 alloc_tab++;
2705         }
2706
2707       end:
2708         /* Transfer ownership of first descriptor to adapter just before
2709          * exiting. Before that, use memory barrier so that ownership
2710          * and other fields are seen by adapter correctly.
2711          */
2712         if (first_rxdp) {
2713                 wmb();
2714                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2715         }
2716
2717         return SUCCESS;
2718 pci_map_failed:
2719         stats->pci_map_fail_cnt++;
2720         stats->mem_freed += skb->truesize;
2721         dev_kfree_skb_irq(skb);
2722         return -ENOMEM;
2723 }
2724
2725 static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
2726 {
2727         struct net_device *dev = sp->dev;
2728         int j;
2729         struct sk_buff *skb;
2730         struct RxD_t *rxdp;
2731         struct mac_info *mac_control;
2732         struct buffAdd *ba;
2733         struct RxD1 *rxdp1;
2734         struct RxD3 *rxdp3;
2735
2736         mac_control = &sp->mac_control;
2737         for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
2738                 rxdp = mac_control->rings[ring_no].
2739                                 rx_blocks[blk].rxds[j].virt_addr;
2740                 skb = (struct sk_buff *)
2741                         ((unsigned long) rxdp->Host_Control);
2742                 if (!skb) {
2743                         continue;
2744                 }
2745                 if (sp->rxd_mode == RXD_MODE_1) {
2746                         rxdp1 = (struct RxD1*)rxdp;
2747                         pci_unmap_single(sp->pdev, (dma_addr_t)
2748                                 rxdp1->Buffer0_ptr,
2749                                 dev->mtu +
2750                                 HEADER_ETHERNET_II_802_3_SIZE
2751                                 + HEADER_802_2_SIZE +
2752                                 HEADER_SNAP_SIZE,
2753                                 PCI_DMA_FROMDEVICE);
2754                         memset(rxdp, 0, sizeof(struct RxD1));
2755                 } else if(sp->rxd_mode == RXD_MODE_3B) {
2756                         rxdp3 = (struct RxD3*)rxdp;
2757                         ba = &mac_control->rings[ring_no].
2758                                 ba[blk][j];
2759                         pci_unmap_single(sp->pdev, (dma_addr_t)
2760                                 rxdp3->Buffer0_ptr,
2761                                 BUF0_LEN,
2762                                 PCI_DMA_FROMDEVICE);
2763                         pci_unmap_single(sp->pdev, (dma_addr_t)
2764                                 rxdp3->Buffer1_ptr,
2765                                 BUF1_LEN,
2766                                 PCI_DMA_FROMDEVICE);
2767                         pci_unmap_single(sp->pdev, (dma_addr_t)
2768                                 rxdp3->Buffer2_ptr,
2769                                 dev->mtu + 4,
2770                                 PCI_DMA_FROMDEVICE);
2771                         memset(rxdp, 0, sizeof(struct RxD3));
2772                 }
2773                 sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
2774                 dev_kfree_skb(skb);
2775                 mac_control->rings[ring_no].rx_bufs_left -= 1;
2776         }
2777 }
2778
2779 /**
2780  *  free_rx_buffers - Frees all Rx buffers
2781  *  @sp: device private variable.
2782  *  Description:
2783  *  This function will free all Rx buffers allocated by host.
2784  *  Return Value:
2785  *  NONE.
2786  */
2787
2788 static void free_rx_buffers(struct s2io_nic *sp)
2789 {
2790         struct net_device *dev = sp->dev;
2791         int i, blk = 0, buf_cnt = 0;
2792         struct mac_info *mac_control;
2793         struct config_param *config;
2794
2795         mac_control = &sp->mac_control;
2796         config = &sp->config;
2797
2798         for (i = 0; i < config->rx_ring_num; i++) {
2799                 for (blk = 0; blk < rx_ring_sz[i]; blk++)
2800                         free_rxd_blk(sp,i,blk);
2801
2802                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
2803                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
2804                 mac_control->rings[i].rx_curr_put_info.offset = 0;
2805                 mac_control->rings[i].rx_curr_get_info.offset = 0;
2806                 mac_control->rings[i].rx_bufs_left = 0;
2807                 DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
2808                           dev->name, buf_cnt, i);
2809         }
2810 }
2811
2812 static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
2813 {
2814         if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
2815                 DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
2816                 DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
2817         }
2818         return 0;
2819 }
2820
2821 /**
2822  * s2io_poll - Rx interrupt handler for NAPI support
2823  * @napi : pointer to the napi structure.
2824  * @budget : The number of packets that were budgeted to be processed
2825  * during  one pass through the 'Poll" function.
2826  * Description:
2827  * Comes into picture only if NAPI support has been incorporated. It does
2828  * the same thing that rx_intr_handler does, but not in a interrupt context
2829  * also It will process only a given number of packets.
2830  * Return value:
2831  * 0 on success and 1 if there are No Rx packets to be processed.
2832  */
2833
2834 static int s2io_poll_msix(struct napi_struct *napi, int budget)
2835 {
2836         struct ring_info *ring = container_of(napi, struct ring_info, napi);
2837         struct net_device *dev = ring->dev;
2838         struct config_param *config;
2839         struct mac_info *mac_control;
2840         int pkts_processed = 0;
2841         u8 __iomem *addr = NULL;
2842         u8 val8 = 0;
2843         struct s2io_nic *nic = dev->priv;
2844         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2845         int budget_org = budget;
2846
2847         config = &nic->config;
2848         mac_control = &nic->mac_control;
2849
2850         if (unlikely(!is_s2io_card_up(nic)))
2851                 return 0;
2852
2853         pkts_processed = rx_intr_handler(ring, budget);
2854         s2io_chk_rx_buffers(nic, ring);
2855
2856         if (pkts_processed < budget_org) {
2857                 netif_rx_complete(dev, napi);
2858                 /*Re Enable MSI-Rx Vector*/
2859                 addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
2860                 addr += 7 - ring->ring_no;
2861                 val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
2862                 writeb(val8, addr);
2863                 val8 = readb(addr);
2864         }
2865         return pkts_processed;
2866 }
2867 static int s2io_poll_inta(struct napi_struct *napi, int budget)
2868 {
2869         struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
2870         struct ring_info *ring;
2871         struct net_device *dev = nic->dev;
2872         struct config_param *config;
2873         struct mac_info *mac_control;
2874         int pkts_processed = 0;
2875         int ring_pkts_processed, i;
2876         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2877         int budget_org = budget;
2878
2879         config = &nic->config;
2880         mac_control = &nic->mac_control;
2881
2882         if (unlikely(!is_s2io_card_up(nic)))
2883                 return 0;
2884
2885         for (i = 0; i < config->rx_ring_num; i++) {
2886                 ring = &mac_control->rings[i];
2887                 ring_pkts_processed = rx_intr_handler(ring, budget);
2888                 s2io_chk_rx_buffers(nic, ring);
2889                 pkts_processed += ring_pkts_processed;
2890                 budget -= ring_pkts_processed;
2891                 if (budget <= 0)
2892                         break;
2893         }
2894         if (pkts_processed < budget_org) {
2895                 netif_rx_complete(dev, napi);
2896                 /* Re enable the Rx interrupts for the ring */
2897                 writeq(0, &bar0->rx_traffic_mask);
2898                 readl(&bar0->rx_traffic_mask);
2899         }
2900         return pkts_processed;
2901 }
2902
2903 #ifdef CONFIG_NET_POLL_CONTROLLER
2904 /**
2905  * s2io_netpoll - netpoll event handler entry point
2906  * @dev : pointer to the device structure.
2907  * Description:
2908  *      This function will be called by upper layer to check for events on the
2909  * interface in situations where interrupts are disabled. It is used for
2910  * specific in-kernel networking tasks, such as remote consoles and kernel
2911  * debugging over the network (example netdump in RedHat).
2912  */
2913 static void s2io_netpoll(struct net_device *dev)
2914 {
2915         struct s2io_nic *nic = dev->priv;
2916         struct mac_info *mac_control;
2917         struct config_param *config;
2918         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2919         u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
2920         int i;
2921
2922         if (pci_channel_offline(nic->pdev))
2923                 return;
2924
2925         disable_irq(dev->irq);
2926
2927         mac_control = &nic->mac_control;
2928         config = &nic->config;
2929
2930         writeq(val64, &bar0->rx_traffic_int);
2931         writeq(val64, &bar0->tx_traffic_int);
2932
2933         /* we need to free up the transmitted skbufs or else netpoll will
2934          * run out of skbs and will fail and eventually netpoll application such
2935          * as netdump will fail.
2936          */
2937         for (i = 0; i < config->tx_fifo_num; i++)
2938                 tx_intr_handler(&mac_control->fifos[i]);
2939
2940         /* check for received packet and indicate up to network */
2941         for (i = 0; i < config->rx_ring_num; i++)
2942                 rx_intr_handler(&mac_control->rings[i], 0);
2943
2944         for (i = 0; i < config->rx_ring_num; i++) {
2945                 if (fill_rx_buffers(nic, &mac_control->rings[i], 0) ==
2946                                 -ENOMEM) {
2947                         DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
2948                         DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
2949                         break;
2950                 }
2951         }
2952         enable_irq(dev->irq);
2953         return;
2954 }
2955 #endif
2956
2957 /**
2958  *  rx_intr_handler - Rx interrupt handler
2959  *  @ring_info: per ring structure.
2960  *  @budget: budget for napi processing.
2961  *  Description:
2962  *  If the interrupt is because of a received frame or if the
2963  *  receive ring contains fresh as yet un-processed frames,this function is
2964  *  called. It picks out the RxD at which place the last Rx processing had
2965  *  stopped and sends the skb to the OSM's Rx handler and then increments
2966  *  the offset.
2967  *  Return Value:
2968  *  No. of napi packets processed.
2969  */
2970 static int rx_intr_handler(struct ring_info *ring_data, int budget)
2971 {
2972         int get_block, put_block;
2973         struct rx_curr_get_info get_info, put_info;
2974         struct RxD_t *rxdp;
2975         struct sk_buff *skb;
2976         int pkt_cnt = 0, napi_pkts = 0;
2977         int i;
2978         struct RxD1* rxdp1;
2979         struct RxD3* rxdp3;
2980
2981         get_info = ring_data->rx_curr_get_info;
2982         get_block = get_info.block_index;
2983         memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
2984         put_block = put_info.block_index;
2985         rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
2986
2987         while (RXD_IS_UP2DT(rxdp)) {
2988                 /*
2989                  * If your are next to put index then it's
2990                  * FIFO full condition
2991                  */
2992                 if ((get_block == put_block) &&
2993                     (get_info.offset + 1) == put_info.offset) {
2994                         DBG_PRINT(INTR_DBG, "%s: Ring Full\n",
2995                                 ring_data->dev->name);
2996                         break;
2997                 }
2998                 skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
2999                 if (skb == NULL) {
3000                         DBG_PRINT(ERR_DBG, "%s: The skb is ",
3001                                   ring_data->dev->name);
3002                         DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
3003                         return 0;
3004                 }
3005                 if (ring_data->rxd_mode == RXD_MODE_1) {
3006                         rxdp1 = (struct RxD1*)rxdp;
3007                         pci_unmap_single(ring_data->pdev, (dma_addr_t)
3008                                 rxdp1->Buffer0_ptr,
3009                                 ring_data->mtu +
3010                                 HEADER_ETHERNET_II_802_3_SIZE +
3011                                 HEADER_802_2_SIZE +
3012                                 HEADER_SNAP_SIZE,
3013                                 PCI_DMA_FROMDEVICE);
3014                 } else if (ring_data->rxd_mode == RXD_MODE_3B) {
3015                         rxdp3 = (struct RxD3*)rxdp;
3016                         pci_dma_sync_single_for_cpu(ring_data->pdev, (dma_addr_t)
3017                                 rxdp3->Buffer0_ptr,
3018                                 BUF0_LEN, PCI_DMA_FROMDEVICE);
3019                         pci_unmap_single(ring_data->pdev, (dma_addr_t)
3020                                 rxdp3->Buffer2_ptr,
3021                                 ring_data->mtu + 4,
3022                                 PCI_DMA_FROMDEVICE);
3023                 }
3024                 prefetch(skb->data);
3025                 rx_osm_handler(ring_data, rxdp);
3026                 get_info.offset++;
3027                 ring_data->rx_curr_get_info.offset = get_info.offset;
3028                 rxdp = ring_data->rx_blocks[get_block].
3029                                 rxds[get_info.offset].virt_addr;
3030                 if (get_info.offset == rxd_count[ring_data->rxd_mode]) {
3031                         get_info.offset = 0;
3032                         ring_data->rx_curr_get_info.offset = get_info.offset;
3033                         get_block++;
3034                         if (get_block == ring_data->block_count)
3035                                 get_block = 0;
3036                         ring_data->rx_curr_get_info.block_index = get_block;
3037                         rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
3038                 }
3039
3040                 if (ring_data->nic->config.napi) {
3041                         budget--;
3042                         napi_pkts++;
3043                         if (!budget)
3044                                 break;
3045                 }
3046                 pkt_cnt++;
3047                 if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
3048                         break;
3049         }
3050         if (ring_data->lro) {
3051                 /* Clear all LRO sessions before exiting */
3052                 for (i=0; i<MAX_LRO_SESSIONS; i++) {
3053                         struct lro *lro = &ring_data->lro0_n[i];
3054                         if (lro->in_use) {
3055                                 update_L3L4_header(ring_data->nic, lro);
3056                                 queue_rx_frame(lro->parent, lro->vlan_tag);
3057                                 clear_lro_session(lro);
3058                         }
3059                 }
3060         }
3061         return(napi_pkts);
3062 }
3063
3064 /**
3065  *  tx_intr_handler - Transmit interrupt handler
3066  *  @nic : device private variable
3067  *  Description:
3068  *  If an interrupt was raised to indicate DMA complete of the
3069  *  Tx packet, this function is called. It identifies the last TxD
3070  *  whose buffer was freed and frees all skbs whose data have already
3071  *  DMA'ed into the NICs internal memory.
3072  *  Return Value:
3073  *  NONE
3074  */
3075
3076 static void tx_intr_handler(struct fifo_info *fifo_data)
3077 {
3078         struct s2io_nic *nic = fifo_data->nic;
3079         struct tx_curr_get_info get_info, put_info;
3080         struct sk_buff *skb = NULL;
3081         struct TxD *txdlp;
3082         int pkt_cnt = 0;
3083         unsigned long flags = 0;
3084         u8 err_mask;
3085
3086         if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags))
3087                         return;
3088
3089         get_info = fifo_data->tx_curr_get_info;
3090         memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
3091         txdlp = (struct TxD *) fifo_data->list_info[get_info.offset].
3092             list_virt_addr;
3093         while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
3094                (get_info.offset != put_info.offset) &&
3095                (txdlp->Host_Control)) {
3096                 /* Check for TxD errors */
3097                 if (txdlp->Control_1 & TXD_T_CODE) {
3098                         unsigned long long err;
3099                         err = txdlp->Control_1 & TXD_T_CODE;
3100                         if (err & 0x1) {
3101                                 nic->mac_control.stats_info->sw_stat.
3102                                                 parity_err_cnt++;
3103                         }
3104
3105                         /* update t_code statistics */
3106                         err_mask = err >> 48;
3107                         switch(err_mask) {
3108                                 case 2:
3109                                         nic->mac_control.stats_info->sw_stat.
3110                                                         tx_buf_abort_cnt++;
3111                                 break;
3112
3113                                 case 3:
3114                                         nic->mac_control.stats_info->sw_stat.
3115                                                         tx_desc_abort_cnt++;
3116                                 break;
3117
3118                                 case 7:
3119                                         nic->mac_control.stats_info->sw_stat.
3120                                                         tx_parity_err_cnt++;
3121                                 break;
3122
3123                                 case 10:
3124                                         nic->mac_control.stats_info->sw_stat.
3125                                                         tx_link_loss_cnt++;
3126                                 break;
3127
3128                                 case 15:
3129                                         nic->mac_control.stats_info->sw_stat.
3130                                                         tx_list_proc_err_cnt++;
3131                                 break;
3132                         }
3133                 }
3134
3135                 skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
3136                 if (skb == NULL) {
3137                         spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3138                         DBG_PRINT(ERR_DBG, "%s: Null skb ",
3139                         __FUNCTION__);
3140                         DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
3141                         return;
3142                 }
3143                 pkt_cnt++;
3144
3145                 /* Updating the statistics block */
3146                 nic->stats.tx_bytes += skb->len;
3147                 nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
3148                 dev_kfree_skb_irq(skb);
3149
3150                 get_info.offset++;
3151                 if (get_info.offset == get_info.fifo_len + 1)
3152                         get_info.offset = 0;
3153                 txdlp = (struct TxD *) fifo_data->list_info
3154                     [get_info.offset].list_virt_addr;
3155                 fifo_data->tx_curr_get_info.offset =
3156                     get_info.offset;
3157         }
3158
3159         s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq);
3160
3161         spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3162 }
3163
3164 /**
3165  *  s2io_mdio_write - Function to write in to MDIO registers
3166  *  @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3167  *  @addr     : address value
3168  *  @value    : data value
3169  *  @dev      : pointer to net_device structure
3170  *  Description:
3171  *  This function is used to write values to the MDIO registers
3172  *  NONE
3173  */
3174 static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, struct net_device *dev)
3175 {
3176         u64 val64 = 0x0;
3177         struct s2io_nic *sp = dev->priv;
3178         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3179
3180         //address transaction
3181         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3182                         | MDIO_MMD_DEV_ADDR(mmd_type)
3183                         | MDIO_MMS_PRT_ADDR(0x0);
3184         writeq(val64, &bar0->mdio_control);
3185         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3186         writeq(val64, &bar0->mdio_control);
3187         udelay(100);
3188
3189         //Data transaction
3190         val64 = 0x0;
3191         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3192                         | MDIO_MMD_DEV_ADDR(mmd_type)
3193                         | MDIO_MMS_PRT_ADDR(0x0)
3194                         | MDIO_MDIO_DATA(value)
3195                         | MDIO_OP(MDIO_OP_WRITE_TRANS);
3196         writeq(val64, &bar0->mdio_control);
3197         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3198         writeq(val64, &bar0->mdio_control);
3199         udelay(100);
3200
3201         val64 = 0x0;
3202         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3203         | MDIO_MMD_DEV_ADDR(mmd_type)
3204         | MDIO_MMS_PRT_ADDR(0x0)
3205         | MDIO_OP(MDIO_OP_READ_TRANS);
3206         writeq(val64, &bar0->mdio_control);
3207         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3208         writeq(val64, &bar0->mdio_control);
3209         udelay(100);
3210
3211 }
3212
3213 /**
3214  *  s2io_mdio_read - Function to write in to MDIO registers
3215  *  @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3216  *  @addr     : address value
3217  *  @dev      : pointer to net_device structure
3218  *  Description:
3219  *  This function is used to read values to the MDIO registers
3220  *  NONE
3221  */
3222 static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
3223 {
3224         u64 val64 = 0x0;
3225         u64 rval64 = 0x0;
3226         struct s2io_nic *sp = dev->priv;
3227         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3228
3229         /* address transaction */
3230         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3231                         | MDIO_MMD_DEV_ADDR(mmd_type)
3232                         | MDIO_MMS_PRT_ADDR(0x0);
3233         writeq(val64, &bar0->mdio_control);
3234         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3235         writeq(val64, &bar0->mdio_control);
3236         udelay(100);
3237
3238         /* Data transaction */
3239         val64 = 0x0;
3240         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3241                         | MDIO_MMD_DEV_ADDR(mmd_type)
3242                         | MDIO_MMS_PRT_ADDR(0x0)
3243                         | MDIO_OP(MDIO_OP_READ_TRANS);
3244         writeq(val64, &bar0->mdio_control);
3245         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3246         writeq(val64, &bar0->mdio_control);
3247         udelay(100);
3248
3249         /* Read the value from regs */
3250         rval64 = readq(&bar0->mdio_control);
3251         rval64 = rval64 & 0xFFFF0000;
3252         rval64 = rval64 >> 16;
3253         return rval64;
3254 }
3255 /**
3256  *  s2io_chk_xpak_counter - Function to check the status of the xpak counters
3257  *  @counter      : couter value to be updated
3258  *  @flag         : flag to indicate the status
3259  *  @type         : counter type
3260  *  Description:
3261  *  This function is to check the status of the xpak counters value
3262  *  NONE
3263  */
3264
3265 static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index, u16 flag, u16 type)
3266 {
3267         u64 mask = 0x3;
3268         u64 val64;
3269         int i;
3270         for(i = 0; i <index; i++)
3271                 mask = mask << 0x2;
3272
3273         if(flag > 0)
3274         {
3275                 *counter = *counter + 1;
3276                 val64 = *regs_stat & mask;
3277                 val64 = val64 >> (index * 0x2);
3278                 val64 = val64 + 1;
3279                 if(val64 == 3)
3280                 {
3281                         switch(type)
3282                         {
3283                         case 1:
3284                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3285                                           "service. Excessive temperatures may "
3286                                           "result in premature transceiver "
3287                                           "failure \n");
3288                         break;
3289                         case 2:
3290                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3291                                           "service Excessive bias currents may "
3292                                           "indicate imminent laser diode "
3293                                           "failure \n");
3294                         break;
3295                         case 3:
3296                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3297                                           "service Excessive laser output "
3298                                           "power may saturate far-end "
3299                                           "receiver\n");
3300                         break;
3301                         default:
3302                                 DBG_PRINT(ERR_DBG, "Incorrect XPAK Alarm "
3303                                           "type \n");
3304                         }
3305                         val64 = 0x0;
3306                 }
3307                 val64 = val64 << (index * 0x2);
3308                 *regs_stat = (*regs_stat & (~mask)) | (val64);
3309
3310         } else {
3311                 *regs_stat = *regs_stat & (~mask);
3312         }
3313 }
3314
3315 /**
3316  *  s2io_updt_xpak_counter - Function to update the xpak counters
3317  *  @dev         : pointer to net_device struct
3318  *  Description:
3319  *  This function is to upate the status of the xpak counters value
3320  *  NONE
3321  */
3322 static void s2io_updt_xpak_counter(struct net_device *dev)
3323 {
3324         u16 flag  = 0x0;
3325         u16 type  = 0x0;
3326         u16 val16 = 0x0;
3327         u64 val64 = 0x0;
3328         u64 addr  = 0x0;
3329
3330         struct s2io_nic *sp = dev->priv;
3331         struct stat_block *stat_info = sp->mac_control.stats_info;
3332
3333         /* Check the communication with the MDIO slave */
3334         addr = 0x0000;
3335         val64 = 0x0;
3336         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3337         if((val64 == 0xFFFF) || (val64 == 0x0000))
3338         {
3339                 DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
3340                           "Returned %llx\n", (unsigned long long)val64);
3341                 return;
3342         }
3343
3344         /* Check for the expecte value of 2040 at PMA address 0x0000 */
3345         if(val64 != 0x2040)
3346         {
3347                 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
3348                 DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n",
3349                           (unsigned long long)val64);
3350                 return;
3351         }
3352
3353         /* Loading the DOM register to MDIO register */
3354         addr = 0xA100;
3355         s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev);
3356         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3357
3358         /* Reading the Alarm flags */
3359         addr = 0xA070;
3360         val64 = 0x0;
3361         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3362
3363         flag = CHECKBIT(val64, 0x7);
3364         type = 1;
3365         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_transceiver_temp_high,
3366                                 &stat_info->xpak_stat.xpak_regs_stat,
3367                                 0x0, flag, type);
3368
3369         if(CHECKBIT(val64, 0x6))
3370                 stat_info->xpak_stat.alarm_transceiver_temp_low++;
3371
3372         flag = CHECKBIT(val64, 0x3);
3373         type = 2;
3374         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_bias_current_high,
3375                                 &stat_info->xpak_stat.xpak_regs_stat,
3376                                 0x2, flag, type);
3377
3378         if(CHECKBIT(val64, 0x2))
3379                 stat_info->xpak_stat.alarm_laser_bias_current_low++;
3380
3381         flag = CHECKBIT(val64, 0x1);
3382         type = 3;
3383         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_output_power_high,
3384                                 &stat_info->xpak_stat.xpak_regs_stat,
3385                                 0x4, flag, type);
3386
3387         if(CHECKBIT(val64, 0x0))
3388                 stat_info->xpak_stat.alarm_laser_output_power_low++;
3389
3390         /* Reading the Warning flags */
3391         addr = 0xA074;
3392         val64 = 0x0;
3393         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3394
3395         if(CHECKBIT(val64, 0x7))
3396                 stat_info->xpak_stat.warn_transceiver_temp_high++;
3397
3398         if(CHECKBIT(val64, 0x6))
3399                 stat_info->xpak_stat.warn_transceiver_temp_low++;
3400
3401         if(CHECKBIT(val64, 0x3))
3402                 stat_info->xpak_stat.warn_laser_bias_current_high++;
3403
3404         if(CHECKBIT(val64, 0x2))
3405                 stat_info->xpak_stat.warn_laser_bias_current_low++;
3406
3407         if(CHECKBIT(val64, 0x1))
3408                 stat_info->xpak_stat.warn_laser_output_power_high++;
3409
3410         if(CHECKBIT(val64, 0x0))
3411                 stat_info->xpak_stat.warn_laser_output_power_low++;
3412 }
3413
3414 /**
3415  *  wait_for_cmd_complete - waits for a command to complete.
3416  *  @sp : private member of the device structure, which is a pointer to the
3417  *  s2io_nic structure.
3418  *  Description: Function that waits for a command to Write into RMAC
3419  *  ADDR DATA registers to be completed and returns either success or
3420  *  error depending on whether the command was complete or not.
3421  *  Return value:
3422  *   SUCCESS on success and FAILURE on failure.
3423  */
3424
3425 static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
3426                                 int bit_state)
3427 {
3428         int ret = FAILURE, cnt = 0, delay = 1;
3429         u64 val64;
3430
3431         if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET))
3432                 return FAILURE;
3433
3434         do {
3435                 val64 = readq(addr);
3436                 if (bit_state == S2IO_BIT_RESET) {
3437                         if (!(val64 & busy_bit)) {
3438                                 ret = SUCCESS;
3439                                 break;
3440                         }
3441                 } else {
3442                         if (!(val64 & busy_bit)) {
3443                                 ret = SUCCESS;
3444                                 break;
3445                         }
3446                 }
3447
3448                 if(in_interrupt())
3449                         mdelay(delay);
3450                 else
3451                         msleep(delay);
3452
3453                 if (++cnt >= 10)
3454                         delay = 50;
3455         } while (cnt < 20);
3456         return ret;
3457 }
3458 /*
3459  * check_pci_device_id - Checks if the device id is supported
3460  * @id : device id
3461  * Description: Function to check if the pci device id is supported by driver.
3462  * Return value: Actual device id if supported else PCI_ANY_ID
3463  */
3464 static u16 check_pci_device_id(u16 id)
3465 {
3466         switch (id) {
3467         case PCI_DEVICE_ID_HERC_WIN:
3468         case PCI_DEVICE_ID_HERC_UNI:
3469                 return XFRAME_II_DEVICE;
3470         case PCI_DEVICE_ID_S2IO_UNI:
3471         case PCI_DEVICE_ID_S2IO_WIN:
3472                 return XFRAME_I_DEVICE;
3473         default:
3474                 return PCI_ANY_ID;
3475         }
3476 }
3477
3478 /**
3479  *  s2io_reset - Resets the card.
3480  *  @sp : private member of the device structure.
3481  *  Description: Function to Reset the card. This function then also
3482  *  restores the previously saved PCI configuration space registers as
3483  *  the card reset also resets the configuration space.
3484  *  Return value:
3485  *  void.
3486  */
3487
3488 static void s2io_reset(struct s2io_nic * sp)
3489 {
3490         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3491         u64 val64;
3492         u16 subid, pci_cmd;
3493         int i;
3494         u16 val16;
3495         unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
3496         unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
3497
3498         DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n",
3499                         __FUNCTION__, sp->dev->name);
3500
3501         /* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
3502         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
3503
3504         val64 = SW_RESET_ALL;
3505         writeq(val64, &bar0->sw_reset);
3506         if (strstr(sp->product_name, "CX4")) {
3507                 msleep(750);
3508         }
3509         msleep(250);
3510         for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
3511
3512                 /* Restore the PCI state saved during initialization. */
3513                 pci_restore_state(sp->pdev);
3514                 pci_read_config_word(sp->pdev, 0x2, &val16);
3515                 if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
3516                         break;
3517                 msleep(200);
3518         }
3519
3520         if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) {
3521                 DBG_PRINT(ERR_DBG,"%s SW_Reset failed!\n", __FUNCTION__);
3522         }
3523
3524         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
3525
3526         s2io_init_pci(sp);
3527
3528         /* Set swapper to enable I/O register access */
3529         s2io_set_swapper(sp);
3530
3531         /* restore mac_addr entries */
3532         do_s2io_restore_unicast_mc(sp);
3533
3534         /* Restore the MSIX table entries from local variables */
3535         restore_xmsi_data(sp);
3536
3537         /* Clear certain PCI/PCI-X fields after reset */
3538         if (sp->device_type == XFRAME_II_DEVICE) {
3539                 /* Clear "detected parity error" bit */
3540                 pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
3541
3542                 /* Clearing PCIX Ecc status register */
3543                 pci_write_config_dword(sp->pdev, 0x68, 0x7C);
3544
3545                 /* Clearing PCI_STATUS error reflected here */
3546                 writeq(s2BIT(62), &bar0->txpic_int_reg);
3547         }
3548
3549         /* Reset device statistics maintained by OS */
3550         memset(&sp->stats, 0, sizeof (struct net_device_stats));
3551
3552         up_cnt = sp->mac_control.stats_info->sw_stat.link_up_cnt;
3553         down_cnt = sp->mac_control.stats_info->sw_stat.link_down_cnt;
3554         up_time = sp->mac_control.stats_info->sw_stat.link_up_time;
3555         down_time = sp->mac_control.stats_info->sw_stat.link_down_time;
3556         reset_cnt = sp->mac_control.stats_info->sw_stat.soft_reset_cnt;
3557         mem_alloc_cnt = sp->mac_control.stats_info->sw_stat.mem_allocated;
3558         mem_free_cnt = sp->mac_control.stats_info->sw_stat.mem_freed;
3559         watchdog_cnt = sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt;
3560         /* save link up/down time/cnt, reset/memory/watchdog cnt */
3561         memset(sp->mac_control.stats_info, 0, sizeof(struct stat_block));
3562         /* restore link up/down time/cnt, reset/memory/watchdog cnt */
3563         sp->mac_control.stats_info->sw_stat.link_up_cnt = up_cnt;
3564         sp->mac_control.stats_info->sw_stat.link_down_cnt = down_cnt;
3565         sp->mac_control.stats_info->sw_stat.link_up_time = up_time;
3566         sp->mac_control.stats_info->sw_stat.link_down_time = down_time;
3567         sp->mac_control.stats_info->sw_stat.soft_reset_cnt = reset_cnt;
3568         sp->mac_control.stats_info->sw_stat.mem_allocated = mem_alloc_cnt;
3569         sp->mac_control.stats_info->sw_stat.mem_freed = mem_free_cnt;
3570         sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt = watchdog_cnt;
3571
3572         /* SXE-002: Configure link and activity LED to turn it off */
3573         subid = sp->pdev->subsystem_device;
3574         if (((subid & 0xFF) >= 0x07) &&
3575             (sp->device_type == XFRAME_I_DEVICE)) {
3576                 val64 = readq(&bar0->gpio_control);
3577                 val64 |= 0x0000800000000000ULL;
3578                 writeq(val64, &bar0->gpio_control);
3579                 val64 = 0x0411040400000000ULL;
3580                 writeq(val64, (void __iomem *)bar0 + 0x2700);
3581         }
3582
3583         /*
3584          * Clear spurious ECC interrupts that would have occured on
3585          * XFRAME II cards after reset.
3586          */
3587         if (sp->device_type == XFRAME_II_DEVICE) {
3588                 val64 = readq(&bar0->pcc_err_reg);
3589                 writeq(val64, &bar0->pcc_err_reg);
3590         }
3591
3592         sp->device_enabled_once = FALSE;
3593 }
3594
3595 /**
3596  *  s2io_set_swapper - to set the swapper controle on the card
3597  *  @sp : private member of the device structure,
3598  *  pointer to the s2io_nic structure.
3599  *  Description: Function to set the swapper control on the card
3600  *  correctly depending on the 'endianness' of the system.
3601  *  Return value:
3602  *  SUCCESS on success and FAILURE on failure.
3603  */
3604
3605 static int s2io_set_swapper(struct s2io_nic * sp)
3606 {
3607         struct net_device *dev = sp->dev;
3608         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3609         u64 val64, valt, valr;
3610
3611         /*
3612          * Set proper endian settings and verify the same by reading
3613          * the PIF Feed-back register.
3614          */
3615
3616         val64 = readq(&bar0->pif_rd_swapper_fb);
3617         if (val64 != 0x0123456789ABCDEFULL) {
3618                 int i = 0;
3619                 u64 value[] = { 0xC30000C3C30000C3ULL,   /* FE=1, SE=1 */
3620                                 0x8100008181000081ULL,  /* FE=1, SE=0 */
3621                                 0x4200004242000042ULL,  /* FE=0, SE=1 */
3622                                 0};                     /* FE=0, SE=0 */
3623
3624                 while(i<4) {
3625                         writeq(value[i], &bar0->swapper_ctrl);
3626                         val64 = readq(&bar0->pif_rd_swapper_fb);
3627                         if (val64 == 0x0123456789ABCDEFULL)
3628                                 break;
3629                         i++;
3630                 }
3631                 if (i == 4) {
3632                         DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3633                                 dev->name);
3634                         DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3635                                 (unsigned long long) val64);
3636                         return FAILURE;
3637                 }
3638                 valr = value[i];
3639         } else {
3640                 valr = readq(&bar0->swapper_ctrl);
3641         }
3642
3643         valt = 0x0123456789ABCDEFULL;
3644         writeq(valt, &bar0->xmsi_address);
3645         val64 = readq(&bar0->xmsi_address);
3646
3647         if(val64 != valt) {
3648                 int i = 0;
3649                 u64 value[] = { 0x00C3C30000C3C300ULL,  /* FE=1, SE=1 */
3650                                 0x0081810000818100ULL,  /* FE=1, SE=0 */
3651                                 0x0042420000424200ULL,  /* FE=0, SE=1 */
3652                                 0};                     /* FE=0, SE=0 */
3653
3654                 while(i<4) {
3655                         writeq((value[i] | valr), &bar0->swapper_ctrl);
3656                         writeq(valt, &bar0->xmsi_address);
3657                         val64 = readq(&bar0->xmsi_address);
3658                         if(val64 == valt)
3659                                 break;
3660                         i++;
3661                 }
3662                 if(i == 4) {
3663                         unsigned long long x = val64;
3664                         DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
3665                         DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
3666                         return FAILURE;
3667                 }
3668         }
3669         val64 = readq(&bar0->swapper_ctrl);
3670         val64 &= 0xFFFF000000000000ULL;
3671
3672 #ifdef  __BIG_ENDIAN
3673         /*
3674          * The device by default set to a big endian format, so a
3675          * big endian driver need not set anything.
3676          */
3677         val64 |= (SWAPPER_CTRL_TXP_FE |
3678                  SWAPPER_CTRL_TXP_SE |
3679                  SWAPPER_CTRL_TXD_R_FE |
3680                  SWAPPER_CTRL_TXD_W_FE |
3681                  SWAPPER_CTRL_TXF_R_FE |
3682                  SWAPPER_CTRL_RXD_R_FE |
3683                  SWAPPER_CTRL_RXD_W_FE |
3684                  SWAPPER_CTRL_RXF_W_FE |
3685                  SWAPPER_CTRL_XMSI_FE |
3686                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3687         if (sp->config.intr_type == INTA)
3688                 val64 |= SWAPPER_CTRL_XMSI_SE;
3689         writeq(val64, &bar0->swapper_ctrl);
3690 #else
3691         /*
3692          * Initially we enable all bits to make it accessible by the
3693          * driver, then we selectively enable only those bits that
3694          * we want to set.
3695          */
3696         val64 |= (SWAPPER_CTRL_TXP_FE |
3697                  SWAPPER_CTRL_TXP_SE |
3698                  SWAPPER_CTRL_TXD_R_FE |
3699                  SWAPPER_CTRL_TXD_R_SE |
3700                  SWAPPER_CTRL_TXD_W_FE |
3701                  SWAPPER_CTRL_TXD_W_SE |
3702                  SWAPPER_CTRL_TXF_R_FE |
3703                  SWAPPER_CTRL_RXD_R_FE |
3704                  SWAPPER_CTRL_RXD_R_SE |
3705                  SWAPPER_CTRL_RXD_W_FE |
3706                  SWAPPER_CTRL_RXD_W_SE |
3707                  SWAPPER_CTRL_RXF_W_FE |
3708                  SWAPPER_CTRL_XMSI_FE |
3709                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3710         if (sp->config.intr_type == INTA)
3711                 val64 |= SWAPPER_CTRL_XMSI_SE;
3712         writeq(val64, &bar0->swapper_ctrl);
3713 #endif
3714         val64 = readq(&bar0->swapper_ctrl);
3715
3716         /*
3717          * Verifying if endian settings are accurate by reading a
3718          * feedback register.
3719          */
3720         val64 = readq(&bar0->pif_rd_swapper_fb);
3721         if (val64 != 0x0123456789ABCDEFULL) {
3722                 /* Endian settings are incorrect, calls for another dekko. */
3723                 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3724                           dev->name);
3725                 DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3726                           (unsigned long long) val64);
3727                 return FAILURE;
3728         }
3729
3730         return SUCCESS;
3731 }
3732
3733 static int wait_for_msix_trans(struct s2io_nic *nic, int i)
3734 {
3735         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3736         u64 val64;
3737         int ret = 0, cnt = 0;
3738
3739         do {
3740                 val64 = readq(&bar0->xmsi_access);
3741                 if (!(val64 & s2BIT(15)))
3742                         break;
3743                 mdelay(1);
3744                 cnt++;
3745         } while(cnt < 5);
3746         if (cnt == 5) {
3747                 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
3748                 ret = 1;
3749         }
3750
3751         return ret;
3752 }
3753
3754 static void restore_xmsi_data(struct s2io_nic *nic)
3755 {
3756         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3757         u64 val64;
3758         int i, msix_index;
3759
3760
3761         if (nic->device_type == XFRAME_I_DEVICE)
3762                 return;
3763
3764         for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3765                 msix_index = (i) ? ((i-1) * 8 + 1): 0;
3766                 writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
3767                 writeq(nic->msix_info[i].data, &bar0->xmsi_data);
3768                 val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
3769                 writeq(val64, &bar0->xmsi_access);
3770                 if (wait_for_msix_trans(nic, msix_index)) {
3771                         DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3772                         continue;
3773                 }
3774         }
3775 }
3776
3777 static void store_xmsi_data(struct s2io_nic *nic)
3778 {
3779         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3780         u64 val64, addr, data;
3781         int i, msix_index;
3782
3783         if (nic->device_type == XFRAME_I_DEVICE)
3784                 return;
3785
3786         /* Store and display */
3787         for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3788                 msix_index = (i) ? ((i-1) * 8 + 1): 0;
3789                 val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
3790                 writeq(val64, &bar0->xmsi_access);
3791                 if (wait_for_msix_trans(nic, msix_index)) {
3792                         DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3793                         continue;
3794                 }
3795                 addr = readq(&bar0->xmsi_address);
3796                 data = readq(&bar0->xmsi_data);
3797                 if (addr && data) {
3798                         nic->msix_info[i].addr = addr;
3799                         nic->msix_info[i].data = data;
3800                 }
3801         }
3802 }
3803
3804 static int s2io_enable_msi_x(struct s2io_nic *nic)
3805 {
3806         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3807         u64 rx_mat;
3808         u16 msi_control; /* Temp variable */
3809         int ret, i, j, msix_indx = 1;
3810
3811         nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry),
3812                                GFP_KERNEL);
3813         if (!nic->entries) {
3814                 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
3815                         __FUNCTION__);
3816                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
3817                 return -ENOMEM;
3818         }
3819         nic->mac_control.stats_info->sw_stat.mem_allocated
3820                 += (nic->num_entries * sizeof(struct msix_entry));
3821
3822         memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry));
3823
3824         nic->s2io_entries =
3825                 kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry),
3826                                    GFP_KERNEL);
3827         if (!nic->s2io_entries) {
3828                 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3829                         __FUNCTION__);
3830                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
3831                 kfree(nic->entries);
3832                 nic->mac_control.stats_info->sw_stat.mem_freed
3833                         += (nic->num_entries * sizeof(struct msix_entry));
3834                 return -ENOMEM;
3835         }
3836          nic->mac_control.stats_info->sw_stat.mem_allocated
3837                 += (nic->num_entries * sizeof(struct s2io_msix_entry));
3838         memset(nic->s2io_entries, 0,
3839                 nic->num_entries * sizeof(struct s2io_msix_entry));
3840
3841         nic->entries[0].entry = 0;
3842         nic->s2io_entries[0].entry = 0;
3843         nic->s2io_entries[0].in_use = MSIX_FLG;
3844         nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
3845         nic->s2io_entries[0].arg = &nic->mac_control.fifos;
3846
3847         for (i = 1; i < nic->num_entries; i++) {
3848                 nic->entries[i].entry = ((i - 1) * 8) + 1;
3849                 nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
3850                 nic->s2io_entries[i].arg = NULL;
3851                 nic->s2io_entries[i].in_use = 0;
3852         }
3853
3854         rx_mat = readq(&bar0->rx_mat);
3855         for (j = 0; j < nic->config.rx_ring_num; j++) {
3856                 rx_mat |= RX_MAT_SET(j, msix_indx);
3857                 nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
3858                 nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
3859                 nic->s2io_entries[j+1].in_use = MSIX_FLG;
3860                 msix_indx += 8;
3861         }
3862         writeq(rx_mat, &bar0->rx_mat);
3863         readq(&bar0->rx_mat);
3864
3865         ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
3866         /* We fail init if error or we get less vectors than min required */
3867         if (ret) {
3868                 DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
3869                 kfree(nic->entries);
3870                 nic->mac_control.stats_info->sw_stat.mem_freed
3871                         += (nic->num_entries * sizeof(struct msix_entry));
3872                 kfree(nic->s2io_entries);
3873                 nic->mac_control.stats_info->sw_stat.mem_freed
3874                         += (nic->num_entries * sizeof(struct s2io_msix_entry));
3875                 nic->entries = NULL;
3876                 nic->s2io_entries = NULL;
3877                 return -ENOMEM;
3878         }
3879
3880         /*
3881          * To enable MSI-X, MSI also needs to be enabled, due to a bug
3882          * in the herc NIC. (Temp change, needs to be removed later)
3883          */
3884         pci_read_config_word(nic->pdev, 0x42, &msi_control);
3885         msi_control |= 0x1; /* Enable MSI */
3886         pci_write_config_word(nic->pdev, 0x42, msi_control);
3887
3888         return 0;
3889 }
3890
3891 /* Handle software interrupt used during MSI(X) test */
3892 static irqreturn_t s2io_test_intr(int irq, void *dev_id)
3893 {
3894         struct s2io_nic *sp = dev_id;
3895
3896         sp->msi_detected = 1;
3897         wake_up(&sp->msi_wait);
3898
3899         return IRQ_HANDLED;
3900 }
3901
3902 /* Test interrupt path by forcing a a software IRQ */
3903 static int s2io_test_msi(struct s2io_nic *sp)
3904 {
3905         struct pci_dev *pdev = sp->pdev;
3906         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3907         int err;
3908         u64 val64, saved64;
3909
3910         err = request_irq(sp->entries[1].vector, s2io_test_intr, 0,
3911                         sp->name, sp);
3912         if (err) {
3913                 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
3914                        sp->dev->name, pci_name(pdev), pdev->irq);
3915                 return err;
3916         }
3917
3918         init_waitqueue_head (&sp->msi_wait);
3919         sp->msi_detected = 0;
3920
3921         saved64 = val64 = readq(&bar0->scheduled_int_ctrl);
3922         val64 |= SCHED_INT_CTRL_ONE_SHOT;
3923         val64 |= SCHED_INT_CTRL_TIMER_EN;
3924         val64 |= SCHED_INT_CTRL_INT2MSI(1);
3925         writeq(val64, &bar0->scheduled_int_ctrl);
3926
3927         wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10);
3928
3929         if (!sp->msi_detected) {
3930                 /* MSI(X) test failed, go back to INTx mode */
3931                 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
3932                         "using MSI(X) during test\n", sp->dev->name,
3933                         pci_name(pdev));
3934
3935                 err = -EOPNOTSUPP;
3936         }
3937
3938         free_irq(sp->entries[1].vector, sp);
3939
3940         writeq(saved64, &bar0->scheduled_int_ctrl);
3941
3942         return err;
3943 }
3944
3945 static void remove_msix_isr(struct s2io_nic *sp)
3946 {
3947         int i;
3948         u16 msi_control;
3949
3950         for (i = 0; i < sp->num_entries; i++) {
3951                 if (sp->s2io_entries[i].in_use ==
3952                         MSIX_REGISTERED_SUCCESS) {
3953                         int vector = sp->entries[i].vector;
3954                         void *arg = sp->s2io_entries[i].arg;
3955                         free_irq(vector, arg);
3956                 }
3957         }
3958
3959         kfree(sp->entries);
3960         kfree(sp->s2io_entries);
3961         sp->entries = NULL;
3962         sp->s2io_entries = NULL;
3963
3964         pci_read_config_word(sp->pdev, 0x42, &msi_control);
3965         msi_control &= 0xFFFE; /* Disable MSI */
3966         pci_write_config_word(sp->pdev, 0x42, msi_control);
3967
3968         pci_disable_msix(sp->pdev);
3969 }
3970
3971 static void remove_inta_isr(struct s2io_nic *sp)
3972 {
3973         struct net_device *dev = sp->dev;
3974
3975         free_irq(sp->pdev->irq, dev);
3976 }
3977
3978 /* ********************************************************* *
3979  * Functions defined below concern the OS part of the driver *
3980  * ********************************************************* */
3981
3982 /**
3983  *  s2io_open - open entry point of the driver
3984  *  @dev : pointer to the device structure.
3985  *  Description:
3986  *  This function is the open entry point of the driver. It mainly calls a
3987  *  function to allocate Rx buffers and inserts them into the buffer
3988  *  descriptors and then enables the Rx part of the NIC.
3989  *  Return value:
3990  *  0 on success and an appropriate (-)ve integer as defined in errno.h
3991  *   file on failure.
3992  */
3993
3994 static int s2io_open(struct net_device *dev)
3995 {
3996         struct s2io_nic *sp = dev->priv;
3997         int err = 0;
3998
3999         /*
4000          * Make sure you have link off by default every time
4001          * Nic is initialized
4002          */
4003         netif_carrier_off(dev);
4004         sp->last_link_state = 0;
4005
4006         /* Initialize H/W and enable interrupts */
4007         err = s2io_card_up(sp);
4008         if (err) {
4009                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
4010                           dev->name);
4011                 goto hw_init_failed;
4012         }
4013
4014         if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) {
4015                 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
4016                 s2io_card_down(sp);
4017                 err = -ENODEV;
4018                 goto hw_init_failed;
4019         }
4020         s2io_start_all_tx_queue(sp);
4021         return 0;
4022
4023 hw_init_failed:
4024         if (sp->config.intr_type == MSI_X) {
4025                 if (sp->entries) {
4026                         kfree(sp->entries);
4027                         sp->mac_control.stats_info->sw_stat.mem_freed
4028                         += (sp->num_entries * sizeof(struct msix_entry));
4029                 }
4030                 if (sp->s2io_entries) {
4031                         kfree(sp->s2io_entries);
4032                         sp->mac_control.stats_info->sw_stat.mem_freed
4033                         += (sp->num_entries * sizeof(struct s2io_msix_entry));
4034                 }
4035         }
4036         return err;
4037 }
4038
4039 /**
4040  *  s2io_close -close entry point of the driver
4041  *  @dev : device pointer.
4042  *  Description:
4043  *  This is the stop entry point of the driver. It needs to undo exactly
4044  *  whatever was done by the open entry point,thus it's usually referred to
4045  *  as the close function.Among other things this function mainly stops the
4046  *  Rx side of the NIC and frees all the Rx buffers in the Rx rings.
4047  *  Return value:
4048  *  0 on success and an appropriate (-)ve integer as defined in errno.h
4049  *  file on failure.
4050  */
4051
4052 static int s2io_close(struct net_device *dev)
4053 {
4054         struct s2io_nic *sp = dev->priv;
4055         struct config_param *config = &sp->config;
4056         u64 tmp64;
4057         int offset;
4058
4059         /* Return if the device is already closed               *
4060         *  Can happen when s2io_card_up failed in change_mtu    *
4061         */
4062         if (!is_s2io_card_up(sp))
4063                 return 0;
4064
4065         s2io_stop_all_tx_queue(sp);
4066         /* delete all populated mac entries */
4067         for (offset = 1; offset < config->max_mc_addr; offset++) {
4068                 tmp64 = do_s2io_read_unicast_mc(sp, offset);
4069                 if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
4070                         do_s2io_delete_unicast_mc(sp, tmp64);
4071         }
4072
4073         s2io_card_down(sp);
4074
4075         return 0;
4076 }
4077
4078 /**
4079  *  s2io_xmit - Tx entry point of te driver
4080  *  @skb : the socket buffer containing the Tx data.
4081  *  @dev : device pointer.
4082  *  Description :
4083  *  This function is the Tx entry point of the driver. S2IO NIC supports
4084  *  certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
4085  *  NOTE: when device cant queue the pkt,just the trans_start variable will
4086  *  not be upadted.
4087  *  Return value:
4088  *  0 on success & 1 on failure.
4089  */
4090
4091 static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
4092 {
4093         struct s2io_nic *sp = dev->priv;
4094         u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
4095         register u64 val64;
4096         struct TxD *txdp;
4097         struct TxFIFO_element __iomem *tx_fifo;
4098         unsigned long flags = 0;
4099         u16 vlan_tag = 0;
4100         struct fifo_info *fifo = NULL;
4101         struct mac_info *mac_control;
4102         struct config_param *config;
4103         int do_spin_lock = 1;
4104         int offload_type;
4105         int enable_per_list_interrupt = 0;
4106         struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
4107
4108         mac_control = &sp->mac_control;
4109         config = &sp->config;
4110
4111         DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
4112
4113         if (unlikely(skb->len <= 0)) {
4114                 DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
4115                 dev_kfree_skb_any(skb);
4116                 return 0;
4117         }
4118
4119         if (!is_s2io_card_up(sp)) {
4120                 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
4121                           dev->name);
4122                 dev_kfree_skb(skb);
4123                 return 0;
4124         }
4125
4126         queue = 0;
4127         if (sp->vlgrp && vlan_tx_tag_present(skb))
4128                 vlan_tag = vlan_tx_tag_get(skb);
4129         if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) {
4130                 if (skb->protocol == htons(ETH_P_IP)) {
4131                         struct iphdr *ip;
4132                         struct tcphdr *th;
4133                         ip = ip_hdr(skb);
4134
4135                         if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
4136                                 th = (struct tcphdr *)(((unsigned char *)ip) +
4137                                                 ip->ihl*4);
4138
4139                                 if (ip->protocol == IPPROTO_TCP) {
4140                                         queue_len = sp->total_tcp_fifos;
4141                                         queue = (ntohs(th->source) +
4142                                                         ntohs(th->dest)) &
4143                                             sp->fifo_selector[queue_len - 1];
4144                                         if (queue >= queue_len)
4145                                                 queue = queue_len - 1;
4146                                 } else if (ip->protocol == IPPROTO_UDP) {
4147                                         queue_len = sp->total_udp_fifos;
4148                                         queue = (ntohs(th->source) +
4149                                                         ntohs(th->dest)) &
4150                                             sp->fifo_selector[queue_len - 1];
4151                                         if (queue >= queue_len)
4152                                                 queue = queue_len - 1;
4153                                         queue += sp->udp_fifo_idx;
4154                                         if (skb->len > 1024)
4155                                                 enable_per_list_interrupt = 1;
4156                                         do_spin_lock = 0;
4157                                 }
4158                         }
4159                 }
4160         } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
4161                 /* get fifo number based on skb->priority value */
4162                 queue = config->fifo_mapping
4163                                         [skb->priority & (MAX_TX_FIFOS - 1)];
4164         fifo = &mac_control->fifos[queue];
4165
4166         if (do_spin_lock)
4167                 spin_lock_irqsave(&fifo->tx_lock, flags);
4168         else {
4169                 if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
4170                         return NETDEV_TX_LOCKED;
4171         }
4172
4173         if (sp->config.multiq) {
4174                 if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
4175                         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4176                         return NETDEV_TX_BUSY;
4177                 }
4178         } else if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
4179                 if (netif_queue_stopped(dev)) {
4180                         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4181                         return NETDEV_TX_BUSY;
4182                 }
4183         }
4184
4185         put_off = (u16) fifo->tx_curr_put_info.offset;
4186         get_off = (u16) fifo->tx_curr_get_info.offset;
4187         txdp = (struct TxD *) fifo->list_info[put_off].list_virt_addr;
4188
4189         queue_len = fifo->tx_curr_put_info.fifo_len + 1;
4190         /* Avoid "put" pointer going beyond "get" pointer */
4191         if (txdp->Host_Control ||
4192                    ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4193                 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
4194                 s2io_stop_tx_queue(sp, fifo->fifo_no);
4195                 dev_kfree_skb(skb);
4196                 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4197                 return 0;
4198         }
4199
4200         offload_type = s2io_offload_type(skb);
4201         if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
4202                 txdp->Control_1 |= TXD_TCP_LSO_EN;
4203                 txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
4204         }
4205         if (skb->ip_summed == CHECKSUM_PARTIAL) {
4206                 txdp->Control_2 |=
4207                     (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
4208                      TXD_TX_CKO_UDP_EN);
4209         }
4210         txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
4211         txdp->Control_1 |= TXD_LIST_OWN_XENA;
4212         txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no);
4213         if (enable_per_list_interrupt)
4214                 if (put_off & (queue_len >> 5))
4215                         txdp->Control_2 |= TXD_INT_TYPE_PER_LIST;
4216         if (vlan_tag) {
4217                 txdp->Control_2 |= TXD_VLAN_ENABLE;
4218                 txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
4219         }
4220
4221         frg_len = skb->len - skb->data_len;
4222         if (offload_type == SKB_GSO_UDP) {
4223                 int ufo_size;
4224
4225                 ufo_size = s2io_udp_mss(skb);
4226                 ufo_size &= ~7;
4227                 txdp->Control_1 |= TXD_UFO_EN;
4228                 txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
4229                 txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
4230 #ifdef __BIG_ENDIAN
4231                 /* both variants do cpu_to_be64(be32_to_cpu(...)) */
4232                 fifo->ufo_in_band_v[put_off] =
4233                                 (__force u64)skb_shinfo(skb)->ip6_frag_id;
4234 #else
4235                 fifo->ufo_in_band_v[put_off] =
4236                                 (__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
4237 #endif
4238                 txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v;
4239                 txdp->Buffer_Pointer = pci_map_single(sp->pdev,
4240                                         fifo->ufo_in_band_v,
4241                                         sizeof(u64), PCI_DMA_TODEVICE);
4242                 if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
4243                         goto pci_map_failed;
4244                 txdp++;
4245         }
4246
4247         txdp->Buffer_Pointer = pci_map_single
4248             (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
4249         if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
4250                 goto pci_map_failed;
4251
4252         txdp->Host_Control = (unsigned long) skb;
4253         txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
4254         if (offload_type == SKB_GSO_UDP)
4255                 txdp->Control_1 |= TXD_UFO_EN;
4256
4257         frg_cnt = skb_shinfo(skb)->nr_frags;
4258         /* For fragmented SKB. */
4259         for (i = 0; i < frg_cnt; i++) {
4260                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
4261                 /* A '0' length fragment will be ignored */
4262                 if (!frag->size)
4263                         continue;
4264                 txdp++;
4265                 txdp->Buffer_Pointer = (u64) pci_map_page
4266                     (sp->pdev, frag->page, frag->page_offset,
4267                      frag->size, PCI_DMA_TODEVICE);
4268                 txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
4269                 if (offload_type == SKB_GSO_UDP)
4270                         txdp->Control_1 |= TXD_UFO_EN;
4271         }
4272         txdp->Control_1 |= TXD_GATHER_CODE_LAST;
4273
4274         if (offload_type == SKB_GSO_UDP)
4275                 frg_cnt++; /* as Txd0 was used for inband header */
4276
4277         tx_fifo = mac_control->tx_FIFO_start[queue];
4278         val64 = fifo->list_info[put_off].list_phy_addr;
4279         writeq(val64, &tx_fifo->TxDL_Pointer);
4280
4281         val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
4282                  TX_FIFO_LAST_LIST);
4283         if (offload_type)
4284                 val64 |= TX_FIFO_SPECIAL_FUNC;
4285
4286         writeq(val64, &tx_fifo->List_Control);
4287
4288         mmiowb();
4289
4290         put_off++;
4291         if (put_off == fifo->tx_curr_put_info.fifo_len + 1)
4292                 put_off = 0;
4293         fifo->tx_curr_put_info.offset = put_off;
4294
4295         /* Avoid "put" pointer going beyond "get" pointer */
4296         if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4297                 sp->mac_control.stats_info->sw_stat.fifo_full_cnt++;
4298                 DBG_PRINT(TX_DBG,
4299                           "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
4300                           put_off, get_off);
4301                 s2io_stop_tx_queue(sp, fifo->fifo_no);
4302         }
4303         mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
4304         dev->trans_start = jiffies;
4305         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4306
4307         if (sp->config.intr_type == MSI_X)
4308                 tx_intr_handler(fifo);
4309
4310         return 0;
4311 pci_map_failed:
4312         stats->pci_map_fail_cnt++;
4313         s2io_stop_tx_queue(sp, fifo->fifo_no);
4314         stats->mem_freed += skb->truesize;
4315         dev_kfree_skb(skb);
4316         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4317         return 0;
4318 }
4319
4320 static void
4321 s2io_alarm_handle(unsigned long data)
4322 {
4323         struct s2io_nic *sp = (struct s2io_nic *)data;
4324         struct net_device *dev = sp->dev;
4325
4326         s2io_handle_errors(dev);
4327         mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
4328 }
4329
4330 static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
4331 {
4332         struct ring_info *ring = (struct ring_info *)dev_id;
4333         struct s2io_nic *sp = ring->nic;
4334         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4335         struct net_device *dev = sp->dev;
4336
4337         if (unlikely(!is_s2io_card_up(sp)))
4338                 return IRQ_HANDLED;
4339
4340         if (sp->config.napi) {
4341                 u8 __iomem *addr = NULL;
4342                 u8 val8 = 0;
4343
4344                 addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
4345                 addr += (7 - ring->ring_no);
4346                 val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
4347                 writeb(val8, addr);
4348                 val8 = readb(addr);
4349                 netif_rx_schedule(dev, &ring->napi);
4350         } else {
4351                 rx_intr_handler(ring, 0);
4352                 s2io_chk_rx_buffers(sp, ring);
4353         }
4354
4355         return IRQ_HANDLED;
4356 }
4357
4358 static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
4359 {
4360         int i;
4361         struct fifo_info *fifos = (struct fifo_info *)dev_id;
4362         struct s2io_nic *sp = fifos->nic;
4363         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4364         struct config_param *config  = &sp->config;
4365         u64 reason;
4366
4367         if (unlikely(!is_s2io_card_up(sp)))
4368                 return IRQ_NONE;
4369
4370         reason = readq(&bar0->general_int_status);
4371         if (unlikely(reason == S2IO_MINUS_ONE))
4372                 /* Nothing much can be done. Get out */
4373                 return IRQ_HANDLED;
4374
4375         if (reason & (GEN_INTR_TXPIC | GEN_INTR_TXTRAFFIC)) {
4376                 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4377
4378                 if (reason & GEN_INTR_TXPIC)
4379                         s2io_txpic_intr_handle(sp);
4380
4381                 if (reason & GEN_INTR_TXTRAFFIC)
4382                         writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4383
4384                 for (i = 0; i < config->tx_fifo_num; i++)
4385                         tx_intr_handler(&fifos[i]);
4386
4387                 writeq(sp->general_int_mask, &bar0->general_int_mask);
4388                 readl(&bar0->general_int_status);
4389                 return IRQ_HANDLED;
4390         }
4391         /* The interrupt was not raised by us */
4392         return IRQ_NONE;
4393 }
4394
4395 static void s2io_txpic_intr_handle(struct s2io_nic *sp)
4396 {
4397         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4398         u64 val64;
4399
4400         val64 = readq(&bar0->pic_int_status);
4401         if (val64 & PIC_INT_GPIO) {
4402                 val64 = readq(&bar0->gpio_int_reg);
4403                 if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
4404                     (val64 & GPIO_INT_REG_LINK_UP)) {
4405                         /*
4406                          * This is unstable state so clear both up/down
4407                          * interrupt and adapter to re-evaluate the link state.
4408                          */
4409                         val64 |=  GPIO_INT_REG_LINK_DOWN;
4410                         val64 |= GPIO_INT_REG_LINK_UP;
4411                         writeq(val64, &bar0->gpio_int_reg);
4412                         val64 = readq(&bar0->gpio_int_mask);
4413                         val64 &= ~(GPIO_INT_MASK_LINK_UP |
4414                                    GPIO_INT_MASK_LINK_DOWN);
4415                         writeq(val64, &bar0->gpio_int_mask);
4416                 }
4417                 else if (val64 & GPIO_INT_REG_LINK_UP) {
4418                         val64 = readq(&bar0->adapter_status);
4419                                 /* Enable Adapter */
4420                         val64 = readq(&bar0->adapter_control);
4421                         val64 |= ADAPTER_CNTL_EN;
4422                         writeq(val64, &bar0->adapter_control);
4423                         val64 |= ADAPTER_LED_ON;
4424                         writeq(val64, &bar0->adapter_control);
4425                         if (!sp->device_enabled_once)
4426                                 sp->device_enabled_once = 1;
4427
4428                         s2io_link(sp, LINK_UP);
4429                         /*
4430                          * unmask link down interrupt and mask link-up
4431                          * intr
4432                          */
4433                         val64 = readq(&bar0->gpio_int_mask);
4434                         val64 &= ~GPIO_INT_MASK_LINK_DOWN;
4435                         val64 |= GPIO_INT_MASK_LINK_UP;
4436                         writeq(val64, &bar0->gpio_int_mask);
4437
4438                 }else if (val64 & GPIO_INT_REG_LINK_DOWN) {
4439                         val64 = readq(&bar0->adapter_status);
4440                         s2io_link(sp, LINK_DOWN);
4441                         /* Link is down so unmaks link up interrupt */
4442                         val64 = readq(&bar0->gpio_int_mask);
4443                         val64 &= ~GPIO_INT_MASK_LINK_UP;
4444                         val64 |= GPIO_INT_MASK_LINK_DOWN;
4445                         writeq(val64, &bar0->gpio_int_mask);
4446
4447                         /* turn off LED */
4448                         val64 = readq(&bar0->adapter_control);
4449                         val64 = val64 &(~ADAPTER_LED_ON);
4450                         writeq(val64, &bar0->adapter_control);
4451                 }
4452         }
4453         val64 = readq(&bar0->gpio_int_mask);
4454 }
4455
4456 /**
4457  *  do_s2io_chk_alarm_bit - Check for alarm and incrment the counter
4458  *  @value: alarm bits
4459  *  @addr: address value
4460  *  @cnt: counter variable
4461  *  Description: Check for alarm and increment the counter
4462  *  Return Value:
4463  *  1 - if alarm bit set
4464  *  0 - if alarm bit is not set
4465  */
4466 static int do_s2io_chk_alarm_bit(u64 value, void __iomem * addr,
4467                           unsigned long long *cnt)
4468 {
4469         u64 val64;
4470         val64 = readq(addr);
4471         if ( val64 & value ) {
4472                 writeq(val64, addr);
4473                 (*cnt)++;
4474                 return 1;
4475         }
4476         return 0;
4477
4478 }
4479
4480 /**
4481  *  s2io_handle_errors - Xframe error indication handler
4482  *  @nic: device private variable
4483  *  Description: Handle alarms such as loss of link, single or
4484  *  double ECC errors, critical and serious errors.
4485  *  Return Value:
4486  *  NONE
4487  */
4488 static void s2io_handle_errors(void * dev_id)
4489 {
4490         struct net_device *dev = (struct net_device *) dev_id;
4491         struct s2io_nic *sp = dev->priv;
4492         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4493         u64 temp64 = 0,val64=0;
4494         int i = 0;
4495
4496         struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat;
4497         struct xpakStat *stats = &sp->mac_control.stats_info->xpak_stat;
4498
4499         if (!is_s2io_card_up(sp))
4500                 return;
4501
4502         if (pci_channel_offline(sp->pdev))
4503                 return;
4504
4505         memset(&sw_stat->ring_full_cnt, 0,
4506                 sizeof(sw_stat->ring_full_cnt));
4507
4508         /* Handling the XPAK counters update */
4509         if(stats->xpak_timer_count < 72000) {
4510                 /* waiting for an hour */
4511                 stats->xpak_timer_count++;
4512         } else {
4513                 s2io_updt_xpak_counter(dev);
4514                 /* reset the count to zero */
4515                 stats->xpak_timer_count = 0;
4516         }
4517
4518         /* Handling link status change error Intr */
4519         if (s2io_link_fault_indication(sp) == MAC_RMAC_ERR_TIMER) {
4520                 val64 = readq(&bar0->mac_rmac_err_reg);
4521                 writeq(val64, &bar0->mac_rmac_err_reg);
4522                 if (val64 & RMAC_LINK_STATE_CHANGE_INT)
4523                         schedule_work(&sp->set_link_task);
4524         }
4525
4526         /* In case of a serious error, the device will be Reset. */
4527         if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source,
4528                                 &sw_stat->serious_err_cnt))
4529                 goto reset;
4530
4531         /* Check for data parity error */
4532         if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg,
4533                                 &sw_stat->parity_err_cnt))
4534                 goto reset;
4535
4536         /* Check for ring full counter */
4537         if (sp->device_type == XFRAME_II_DEVICE) {
4538                 val64 = readq(&bar0->ring_bump_counter1);
4539                 for (i=0; i<4; i++) {
4540                         temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
4541                         temp64 >>= 64 - ((i+1)*16);
4542                         sw_stat->ring_full_cnt[i] += temp64;
4543                 }
4544
4545                 val64 = readq(&bar0->ring_bump_counter2);
4546                 for (i=0; i<4; i++) {
4547                         temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
4548                         temp64 >>= 64 - ((i+1)*16);
4549                          sw_stat->ring_full_cnt[i+4] += temp64;
4550                 }
4551         }
4552
4553         val64 = readq(&bar0->txdma_int_status);
4554         /*check for pfc_err*/
4555         if (val64 & TXDMA_PFC_INT) {
4556                 if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM|
4557                                 PFC_MISC_0_ERR | PFC_MISC_1_ERR|
4558                                 PFC_PCIX_ERR, &bar0->pfc_err_reg,
4559                                 &sw_stat->pfc_err_cnt))
4560                         goto reset;
4561                 do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR, &bar0->pfc_err_reg,
4562                                 &sw_stat->pfc_err_cnt);
4563         }
4564
4565         /*check for tda_err*/
4566         if (val64 & TXDMA_TDA_INT) {
4567                 if(do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
4568                                 TDA_SM1_ERR_ALARM, &bar0->tda_err_reg,
4569                                 &sw_stat->tda_err_cnt))
4570                         goto reset;
4571                 do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR,
4572                                 &bar0->tda_err_reg, &sw_stat->tda_err_cnt);
4573         }
4574         /*check for pcc_err*/
4575         if (val64 & TXDMA_PCC_INT) {
4576                 if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM
4577                                 | PCC_N_SERR | PCC_6_COF_OV_ERR
4578                                 | PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR
4579                                 | PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR
4580                                 | PCC_TXB_ECC_DB_ERR, &bar0->pcc_err_reg,
4581                                 &sw_stat->pcc_err_cnt))
4582                         goto reset;
4583                 do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR,
4584                                 &bar0->pcc_err_reg, &sw_stat->pcc_err_cnt);
4585         }
4586
4587         /*check for tti_err*/
4588         if (val64 & TXDMA_TTI_INT) {
4589                 if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM, &bar0->tti_err_reg,
4590                                 &sw_stat->tti_err_cnt))
4591                         goto reset;
4592                 do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR,
4593                                 &bar0->tti_err_reg, &sw_stat->tti_err_cnt);
4594         }
4595
4596         /*check for lso_err*/
4597         if (val64 & TXDMA_LSO_INT) {
4598                 if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT
4599                                 | LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM,
4600                                 &bar0->lso_err_reg, &sw_stat->lso_err_cnt))
4601                         goto reset;
4602                 do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
4603                                 &bar0->lso_err_reg, &sw_stat->lso_err_cnt);
4604         }
4605
4606         /*check for tpa_err*/
4607         if (val64 & TXDMA_TPA_INT) {
4608                 if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM, &bar0->tpa_err_reg,
4609                         &sw_stat->tpa_err_cnt))
4610                         goto reset;
4611                 do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP, &bar0->tpa_err_reg,
4612                         &sw_stat->tpa_err_cnt);
4613         }
4614
4615         /*check for sm_err*/
4616         if (val64 & TXDMA_SM_INT) {
4617                 if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM, &bar0->sm_err_reg,
4618                         &sw_stat->sm_err_cnt))
4619                         goto reset;
4620         }
4621
4622         val64 = readq(&bar0->mac_int_status);
4623         if (val64 & MAC_INT_STATUS_TMAC_INT) {
4624                 if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR,
4625                                 &bar0->mac_tmac_err_reg,
4626                                 &sw_stat->mac_tmac_err_cnt))
4627                         goto reset;
4628                 do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR
4629                                 | TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
4630                                 &bar0->mac_tmac_err_reg,
4631                                 &sw_stat->mac_tmac_err_cnt);
4632         }
4633
4634         val64 = readq(&bar0->xgxs_int_status);
4635         if (val64 & XGXS_INT_STATUS_TXGXS) {
4636                 if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR,
4637                                 &bar0->xgxs_txgxs_err_reg,
4638                                 &sw_stat->xgxs_txgxs_err_cnt))
4639                         goto reset;
4640                 do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
4641                                 &bar0->xgxs_txgxs_err_reg,
4642                                 &sw_stat->xgxs_txgxs_err_cnt);
4643         }
4644
4645         val64 = readq(&bar0->rxdma_int_status);
4646         if (val64 & RXDMA_INT_RC_INT_M) {
4647                 if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR
4648                                 | RC_PRCn_SM_ERR_ALARM |RC_FTC_SM_ERR_ALARM,
4649                                 &bar0->rc_err_reg, &sw_stat->rc_err_cnt))
4650                         goto reset;
4651                 do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR
4652                                 | RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg,
4653                                 &sw_stat->rc_err_cnt);
4654                 if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn
4655                                 | PRC_PCI_AB_F_WR_Rn, &bar0->prc_pcix_err_reg,
4656                                 &sw_stat->prc_pcix_err_cnt))
4657                         goto reset;
4658                 do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn | PRC_PCI_DP_WR_Rn
4659                                 | PRC_PCI_DP_F_WR_Rn, &bar0->prc_pcix_err_reg,
4660                                 &sw_stat->prc_pcix_err_cnt);
4661         }
4662
4663         if (val64 & RXDMA_INT_RPA_INT_M) {
4664                 if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR,
4665                                 &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt))
4666                         goto reset;
4667                 do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR,
4668                                 &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt);
4669         }
4670
4671         if (val64 & RXDMA_INT_RDA_INT_M) {
4672                 if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR
4673                                 | RDA_FRM_ECC_DB_N_AERR | RDA_SM1_ERR_ALARM
4674                                 | RDA_SM0_ERR_ALARM | RDA_RXD_ECC_DB_SERR,
4675                                 &bar0->rda_err_reg, &sw_stat->rda_err_cnt))
4676                         goto reset;
4677                 do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR | RDA_FRM_ECC_SG_ERR
4678                                 | RDA_MISC_ERR | RDA_PCIX_ERR,
4679                                 &bar0->rda_err_reg, &sw_stat->rda_err_cnt);
4680         }
4681
4682         if (val64 & RXDMA_INT_RTI_INT_M) {
4683                 if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM, &bar0->rti_err_reg,
4684                                 &sw_stat->rti_err_cnt))
4685                         goto reset;
4686                 do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
4687                                 &bar0->rti_err_reg, &sw_stat->rti_err_cnt);
4688         }
4689
4690         val64 = readq(&bar0->mac_int_status);
4691         if (val64 & MAC_INT_STATUS_RMAC_INT) {
4692                 if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR,
4693                                 &bar0->mac_rmac_err_reg,
4694                                 &sw_stat->mac_rmac_err_cnt))
4695                         goto reset;
4696                 do_s2io_chk_alarm_bit(RMAC_UNUSED_INT|RMAC_SINGLE_ECC_ERR|
4697                                 RMAC_DOUBLE_ECC_ERR, &bar0->mac_rmac_err_reg,
4698                                 &sw_stat->mac_rmac_err_cnt);
4699         }
4700
4701         val64 = readq(&bar0->xgxs_int_status);
4702         if (val64 & XGXS_INT_STATUS_RXGXS) {
4703                 if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR,
4704                                 &bar0->xgxs_rxgxs_err_reg,
4705                                 &sw_stat->xgxs_rxgxs_err_cnt))
4706                         goto reset;
4707         }
4708
4709         val64 = readq(&bar0->mc_int_status);
4710         if(val64 & MC_INT_STATUS_MC_INT) {
4711                 if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR, &bar0->mc_err_reg,
4712                                 &sw_stat->mc_err_cnt))
4713                         goto reset;
4714
4715                 /* Handling Ecc errors */
4716                 if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
4717                         writeq(val64, &bar0->mc_err_reg);
4718                         if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
4719                                 sw_stat->double_ecc_errs++;
4720                                 if (sp->device_type != XFRAME_II_DEVICE) {
4721                                         /*
4722                                          * Reset XframeI only if critical error
4723                                          */
4724                                         if (val64 &
4725                                                 (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
4726                                                 MC_ERR_REG_MIRI_ECC_DB_ERR_1))
4727                                                                 goto reset;
4728                                         }
4729                         } else
4730                                 sw_stat->single_ecc_errs++;
4731                 }
4732         }
4733         return;
4734
4735 reset:
4736         s2io_stop_all_tx_queue(sp);
4737         schedule_work(&sp->rst_timer_task);
4738         sw_stat->soft_reset_cnt++;
4739         return;
4740 }
4741
4742 /**
4743  *  s2io_isr - ISR handler of the device .
4744  *  @irq: the irq of the device.
4745  *  @dev_id: a void pointer to the dev structure of the NIC.
4746  *  Description:  This function is the ISR handler of the device. It
4747  *  identifies the reason for the interrupt and calls the relevant
4748  *  service routines. As a contongency measure, this ISR allocates the
4749  *  recv buffers, if their numbers are below the panic value which is
4750  *  presently set to 25% of the original number of rcv buffers allocated.
4751  *  Return value:
4752  *   IRQ_HANDLED: will be returned if IRQ was handled by this routine
4753  *   IRQ_NONE: will be returned if interrupt is not from our device
4754  */
4755 static irqreturn_t s2io_isr(int irq, void *dev_id)
4756 {
4757         struct net_device *dev = (struct net_device *) dev_id;
4758         struct s2io_nic *sp = dev->priv;
4759         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4760         int i;
4761         u64 reason = 0;
4762         struct mac_info *mac_control;
4763         struct config_param *config;
4764
4765         /* Pretend we handled any irq's from a disconnected card */
4766         if (pci_channel_offline(sp->pdev))
4767                 return IRQ_NONE;
4768
4769         if (!is_s2io_card_up(sp))
4770                 return IRQ_NONE;
4771
4772         mac_control = &sp->mac_control;
4773         config = &sp->config;
4774
4775         /*
4776          * Identify the cause for interrupt and call the appropriate
4777          * interrupt handler. Causes for the interrupt could be;
4778          * 1. Rx of packet.
4779          * 2. Tx complete.
4780          * 3. Link down.
4781          */
4782         reason = readq(&bar0->general_int_status);
4783
4784         if (unlikely(reason == S2IO_MINUS_ONE) ) {
4785                 /* Nothing much can be done. Get out */
4786                 return IRQ_HANDLED;
4787         }
4788
4789         if (reason & (GEN_INTR_RXTRAFFIC |
4790                 GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC))
4791         {
4792                 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4793
4794                 if (config->napi) {
4795                         if (reason & GEN_INTR_RXTRAFFIC) {
4796                                 netif_rx_schedule(dev, &sp->napi);
4797                                 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
4798                                 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4799                                 readl(&bar0->rx_traffic_int);
4800                         }
4801                 } else {
4802                         /*
4803                          * rx_traffic_int reg is an R1 register, writing all 1's
4804                          * will ensure that the actual interrupt causing bit
4805                          * get's cleared and hence a read can be avoided.
4806                          */
4807                         if (reason & GEN_INTR_RXTRAFFIC)
4808                                 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4809
4810                         for (i = 0; i < config->rx_ring_num; i++)
4811                                 rx_intr_handler(&mac_control->rings[i], 0);
4812                 }
4813
4814                 /*
4815                  * tx_traffic_int reg is an R1 register, writing all 1's
4816                  * will ensure that the actual interrupt causing bit get's
4817                  * cleared and hence a read can be avoided.
4818                  */
4819                 if (reason & GEN_INTR_TXTRAFFIC)
4820                         writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4821
4822                 for (i = 0; i < config->tx_fifo_num; i++)
4823                         tx_intr_handler(&mac_control->fifos[i]);
4824
4825                 if (reason & GEN_INTR_TXPIC)
4826                         s2io_txpic_intr_handle(sp);
4827
4828                 /*
4829                  * Reallocate the buffers from the interrupt handler itself.
4830                  */
4831                 if (!config->napi) {
4832                         for (i = 0; i < config->rx_ring_num; i++)
4833                                 s2io_chk_rx_buffers(sp, &mac_control->rings[i]);
4834                 }
4835                 writeq(sp->general_int_mask, &bar0->general_int_mask);
4836                 readl(&bar0->general_int_status);
4837
4838                 return IRQ_HANDLED;
4839
4840         }
4841         else if (!reason) {
4842                 /* The interrupt was not raised by us */
4843                 return IRQ_NONE;
4844         }
4845
4846         return IRQ_HANDLED;
4847 }
4848
4849 /**
4850  * s2io_updt_stats -
4851  */
4852 static void s2io_updt_stats(struct s2io_nic *sp)
4853 {
4854         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4855         u64 val64;
4856         int cnt = 0;
4857
4858         if (is_s2io_card_up(sp)) {
4859                 /* Apprx 30us on a 133 MHz bus */
4860                 val64 = SET_UPDT_CLICKS(10) |
4861                         STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
4862                 writeq(val64, &bar0->stat_cfg);
4863                 do {
4864                         udelay(100);
4865                         val64 = readq(&bar0->stat_cfg);
4866                         if (!(val64 & s2BIT(0)))
4867                                 break;
4868                         cnt++;
4869                         if (cnt == 5)
4870                                 break; /* Updt failed */
4871                 } while(1);
4872         }
4873 }
4874
4875 /**
4876  *  s2io_get_stats - Updates the device statistics structure.
4877  *  @dev : pointer to the device structure.
4878  *  Description:
4879  *  This function updates the device statistics structure in the s2io_nic
4880  *  structure and returns a pointer to the same.
4881  *  Return value:
4882  *  pointer to the updated net_device_stats structure.
4883  */
4884
4885 static struct net_device_stats *s2io_get_stats(struct net_device *dev)
4886 {
4887         struct s2io_nic *sp = dev->priv;
4888         struct mac_info *mac_control;
4889         struct config_param *config;
4890         int i;
4891
4892
4893         mac_control = &sp->mac_control;
4894         config = &sp->config;
4895
4896         /* Configure Stats for immediate updt */
4897         s2io_updt_stats(sp);
4898
4899         sp->stats.tx_packets =
4900                 le32_to_cpu(mac_control->stats_info->tmac_frms);
4901         sp->stats.tx_errors =
4902                 le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
4903         sp->stats.rx_errors =
4904                 le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
4905         sp->stats.multicast =
4906                 le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
4907         sp->stats.rx_length_errors =
4908                 le64_to_cpu(mac_control->stats_info->rmac_long_frms);
4909
4910         /* collect per-ring rx_packets and rx_bytes */
4911         sp->stats.rx_packets = sp->stats.rx_bytes = 0;
4912         for (i = 0; i < config->rx_ring_num; i++) {
4913                 sp->stats.rx_packets += mac_control->rings[i].rx_packets;
4914                 sp->stats.rx_bytes += mac_control->rings[i].rx_bytes;
4915         }
4916
4917         return (&sp->stats);
4918 }
4919
4920 /**
4921  *  s2io_set_multicast - entry point for multicast address enable/disable.
4922  *  @dev : pointer to the device structure
4923  *  Description:
4924  *  This function is a driver entry point which gets called by the kernel
4925  *  whenever multicast addresses must be enabled/disabled. This also gets
4926  *  called to set/reset promiscuous mode. Depending on the deivce flag, we
4927  *  determine, if multicast address must be enabled or if promiscuous mode
4928  *  is to be disabled etc.
4929  *  Return value:
4930  *  void.
4931  */
4932
4933 static void s2io_set_multicast(struct net_device *dev)
4934 {
4935         int i, j, prev_cnt;
4936         struct dev_mc_list *mclist;
4937         struct s2io_nic *sp = dev->priv;
4938         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4939         u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
4940             0xfeffffffffffULL;
4941         u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
4942         void __iomem *add;
4943         struct config_param *config = &sp->config;
4944
4945         if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
4946                 /*  Enable all Multicast addresses */
4947                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
4948                        &bar0->rmac_addr_data0_mem);
4949                 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
4950                        &bar0->rmac_addr_data1_mem);
4951                 val64 = RMAC_ADDR_CMD_MEM_WE |
4952                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4953                     RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
4954                 writeq(val64, &bar0->rmac_addr_cmd_mem);
4955                 /* Wait till command completes */
4956                 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4957                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4958                                         S2IO_BIT_RESET);
4959
4960                 sp->m_cast_flg = 1;
4961                 sp->all_multi_pos = config->max_mc_addr - 1;
4962         } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
4963                 /*  Disable all Multicast addresses */
4964                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
4965                        &bar0->rmac_addr_data0_mem);
4966                 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
4967                        &bar0->rmac_addr_data1_mem);
4968                 val64 = RMAC_ADDR_CMD_MEM_WE |
4969                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4970                     RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
4971                 writeq(val64, &bar0->rmac_addr_cmd_mem);
4972                 /* Wait till command completes */
4973                 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4974                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4975                                         S2IO_BIT_RESET);
4976
4977                 sp->m_cast_flg = 0;
4978                 sp->all_multi_pos = 0;
4979         }
4980
4981         if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
4982                 /*  Put the NIC into promiscuous mode */
4983                 add = &bar0->mac_cfg;
4984                 val64 = readq(&bar0->mac_cfg);
4985                 val64 |= MAC_CFG_RMAC_PROM_ENABLE;
4986
4987                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4988                 writel((u32) val64, add);
4989                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4990                 writel((u32) (val64 >> 32), (add + 4));
4991
4992                 if (vlan_tag_strip != 1) {
4993                         val64 = readq(&bar0->rx_pa_cfg);
4994                         val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
4995                         writeq(val64, &bar0->rx_pa_cfg);
4996                         vlan_strip_flag = 0;
4997                 }
4998
4999                 val64 = readq(&bar0->mac_cfg);
5000                 sp->promisc_flg = 1;
5001                 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
5002                           dev->name);
5003         } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
5004                 /*  Remove the NIC from promiscuous mode */
5005                 add = &bar0->mac_cfg;
5006                 val64 = readq(&bar0->mac_cfg);
5007                 val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
5008
5009                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5010                 writel((u32) val64, add);
5011                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5012                 writel((u32) (val64 >> 32), (add + 4));
5013
5014                 if (vlan_tag_strip != 0) {
5015                         val64 = readq(&bar0->rx_pa_cfg);
5016                         val64 |= RX_PA_CFG_STRIP_VLAN_TAG;
5017                         writeq(val64, &bar0->rx_pa_cfg);
5018                         vlan_strip_flag = 1;
5019                 }
5020
5021                 val64 = readq(&bar0->mac_cfg);
5022                 sp->promisc_flg = 0;
5023                 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
5024                           dev->name);
5025         }
5026
5027         /*  Update individual M_CAST address list */
5028         if ((!sp->m_cast_flg) && dev->mc_count) {
5029                 if (dev->mc_count >
5030                     (config->max_mc_addr - config->max_mac_addr)) {
5031                         DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
5032                                   dev->name);
5033                         DBG_PRINT(ERR_DBG, "can be added, please enable ");
5034                         DBG_PRINT(ERR_DBG, "ALL_MULTI instead\n");
5035                         return;
5036                 }
5037
5038                 prev_cnt = sp->mc_addr_count;
5039                 sp->mc_addr_count = dev->mc_count;
5040
5041                 /* Clear out the previous list of Mc in the H/W. */
5042                 for (i = 0; i < prev_cnt; i++) {
5043                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
5044                                &bar0->rmac_addr_data0_mem);
5045                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5046                                 &bar0->rmac_addr_data1_mem);
5047                         val64 = RMAC_ADDR_CMD_MEM_WE |
5048                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5049                             RMAC_ADDR_CMD_MEM_OFFSET
5050                             (config->mc_start_offset + i);
5051                         writeq(val64, &bar0->rmac_addr_cmd_mem);
5052
5053                         /* Wait for command completes */
5054                         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5055                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5056                                         S2IO_BIT_RESET)) {
5057                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
5058                                           dev->name);
5059                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
5060                                 return;
5061                         }
5062                 }
5063
5064                 /* Create the new Rx filter list and update the same in H/W. */
5065                 for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
5066                      i++, mclist = mclist->next) {
5067                         memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
5068                                ETH_ALEN);
5069                         mac_addr = 0;
5070                         for (j = 0; j < ETH_ALEN; j++) {
5071                                 mac_addr |= mclist->dmi_addr[j];
5072                                 mac_addr <<= 8;
5073                         }
5074                         mac_addr >>= 8;
5075                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
5076                                &bar0->rmac_addr_data0_mem);
5077                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5078                                 &bar0->rmac_addr_data1_mem);
5079                         val64 = RMAC_ADDR_CMD_MEM_WE |
5080                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5081                             RMAC_ADDR_CMD_MEM_OFFSET
5082                             (i + config->mc_start_offset);
5083                         writeq(val64, &bar0->rmac_addr_cmd_mem);
5084
5085                         /* Wait for command completes */
5086                         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5087                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5088                                         S2IO_BIT_RESET)) {
5089                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
5090                                           dev->name);
5091                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
5092                                 return;
5093                         }
5094                 }
5095         }
5096 }
5097
5098 /* read from CAM unicast & multicast addresses and store it in
5099  * def_mac_addr structure
5100  */
5101 void do_s2io_store_unicast_mc(struct s2io_nic *sp)
5102 {
5103         int offset;
5104         u64 mac_addr = 0x0;
5105         struct config_param *config = &sp->config;
5106
5107         /* store unicast & multicast mac addresses */
5108         for (offset = 0; offset < config->max_mc_addr; offset++) {
5109                 mac_addr = do_s2io_read_unicast_mc(sp, offset);
5110                 /* if read fails disable the entry */
5111                 if (mac_addr == FAILURE)
5112                         mac_addr = S2IO_DISABLE_MAC_ENTRY;
5113                 do_s2io_copy_mac_addr(sp, offset, mac_addr);
5114         }
5115 }
5116
5117 /* restore unicast & multicast MAC to CAM from def_mac_addr structure */
5118 static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
5119 {
5120         int offset;
5121         struct config_param *config = &sp->config;
5122         /* restore unicast mac address */
5123         for (offset = 0; offset < config->max_mac_addr; offset++)
5124                 do_s2io_prog_unicast(sp->dev,
5125                         sp->def_mac_addr[offset].mac_addr);
5126
5127         /* restore multicast mac address */
5128         for (offset = config->mc_start_offset;
5129                 offset < config->max_mc_addr; offset++)
5130                 do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
5131 }
5132
5133 /* add a multicast MAC address to CAM */
5134 static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
5135 {
5136         int i;
5137         u64 mac_addr = 0;
5138         struct config_param *config = &sp->config;
5139
5140         for (i = 0; i < ETH_ALEN; i++) {
5141                 mac_addr <<= 8;
5142                 mac_addr |= addr[i];
5143         }
5144         if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
5145                 return SUCCESS;
5146
5147         /* check if the multicast mac already preset in CAM */
5148         for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
5149                 u64 tmp64;
5150                 tmp64 = do_s2io_read_unicast_mc(sp, i);
5151                 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5152                         break;
5153
5154                 if (tmp64 == mac_addr)
5155                         return SUCCESS;
5156         }
5157         if (i == config->max_mc_addr) {
5158                 DBG_PRINT(ERR_DBG,
5159                         "CAM full no space left for multicast MAC\n");
5160                 return FAILURE;
5161         }
5162         /* Update the internal structure with this new mac address */
5163         do_s2io_copy_mac_addr(sp, i, mac_addr);
5164
5165         return (do_s2io_add_mac(sp, mac_addr, i));
5166 }
5167
5168 /* add MAC address to CAM */
5169 static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
5170 {
5171         u64 val64;
5172         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5173
5174         writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr),
5175                 &bar0->rmac_addr_data0_mem);
5176
5177         val64 =
5178                 RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5179                 RMAC_ADDR_CMD_MEM_OFFSET(off);
5180         writeq(val64, &bar0->rmac_addr_cmd_mem);
5181
5182         /* Wait till command completes */
5183         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5184                 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5185                 S2IO_BIT_RESET)) {
5186                 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
5187                 return FAILURE;
5188         }
5189         return SUCCESS;
5190 }
5191 /* deletes a specified unicast/multicast mac entry from CAM */
5192 static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
5193 {
5194         int offset;
5195         u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
5196         struct config_param *config = &sp->config;
5197
5198         for (offset = 1;
5199                 offset < config->max_mc_addr; offset++) {
5200                 tmp64 = do_s2io_read_unicast_mc(sp, offset);
5201                 if (tmp64 == addr) {
5202                         /* disable the entry by writing  0xffffffffffffULL */
5203                         if (do_s2io_add_mac(sp, dis_addr, offset) ==  FAILURE)
5204                                 return FAILURE;
5205                         /* store the new mac list from CAM */
5206                         do_s2io_store_unicast_mc(sp);
5207                         return SUCCESS;
5208                 }
5209         }
5210         DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
5211                         (unsigned long long)addr);
5212         return FAILURE;
5213 }
5214
5215 /* read mac entries from CAM */
5216 static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
5217 {
5218         u64 tmp64 = 0xffffffffffff0000ULL, val64;
5219         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5220
5221         /* read mac addr */
5222         val64 =
5223                 RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5224                 RMAC_ADDR_CMD_MEM_OFFSET(offset);
5225         writeq(val64, &bar0->rmac_addr_cmd_mem);
5226
5227         /* Wait till command completes */
5228         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5229                 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5230                 S2IO_BIT_RESET)) {
5231                 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
5232                 return FAILURE;
5233         }
5234         tmp64 = readq(&bar0->rmac_addr_data0_mem);
5235         return (tmp64 >> 16);
5236 }
5237
5238 /**
5239  * s2io_set_mac_addr driver entry point
5240  */
5241
5242 static int s2io_set_mac_addr(struct net_device *dev, void *p)
5243 {
5244         struct sockaddr *addr = p;
5245
5246         if (!is_valid_ether_addr(addr->sa_data))
5247                 return -EINVAL;
5248
5249         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
5250
5251         /* store the MAC address in CAM */
5252         return (do_s2io_prog_unicast(dev, dev->dev_addr));
5253 }
5254 /**
5255  *  do_s2io_prog_unicast - Programs the Xframe mac address
5256  *  @dev : pointer to the device structure.
5257  *  @addr: a uchar pointer to the new mac address which is to be set.
5258  *  Description : This procedure will program the Xframe to receive
5259  *  frames with new Mac Address
5260  *  Return value: SUCCESS on success and an appropriate (-)ve integer
5261  *  as defined in errno.h file on failure.
5262  */
5263
5264 static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
5265 {
5266         struct s2io_nic *sp = dev->priv;
5267         register u64 mac_addr = 0, perm_addr = 0;
5268         int i;
5269         u64 tmp64;
5270         struct config_param *config = &sp->config;
5271
5272         /*
5273         * Set the new MAC address as the new unicast filter and reflect this
5274         * change on the device address registered with the OS. It will be
5275         * at offset 0.
5276         */
5277         for (i = 0; i < ETH_ALEN; i++) {
5278                 mac_addr <<= 8;
5279                 mac_addr |= addr[i];
5280                 perm_addr <<= 8;
5281                 perm_addr |= sp->def_mac_addr[0].mac_addr[i];
5282         }
5283
5284         /* check if the dev_addr is different than perm_addr */
5285         if (mac_addr == perm_addr)
5286                 return SUCCESS;
5287
5288         /* check if the mac already preset in CAM */
5289         for (i = 1; i < config->max_mac_addr; i++) {
5290                 tmp64 = do_s2io_read_unicast_mc(sp, i);
5291                 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5292                         break;
5293
5294                 if (tmp64 == mac_addr) {
5295                         DBG_PRINT(INFO_DBG,
5296                         "MAC addr:0x%llx already present in CAM\n",
5297                         (unsigned long long)mac_addr);
5298                         return SUCCESS;
5299                 }
5300         }
5301         if (i == config->max_mac_addr) {
5302                 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
5303                 return FAILURE;
5304         }
5305         /* Update the internal structure with this new mac address */
5306         do_s2io_copy_mac_addr(sp, i, mac_addr);
5307         return (do_s2io_add_mac(sp, mac_addr, i));
5308 }
5309
5310 /**
5311  * s2io_ethtool_sset - Sets different link parameters.
5312  * @sp : private member of the device structure, which is a pointer to the  * s2io_nic structure.
5313  * @info: pointer to the structure with parameters given by ethtool to set
5314  * link information.
5315  * Description:
5316  * The function sets different link parameters provided by the user onto
5317  * the NIC.
5318  * Return value:
5319  * 0 on success.
5320 */
5321
5322 static int s2io_ethtool_sset(struct net_device *dev,
5323                              struct ethtool_cmd *info)
5324 {
5325         struct s2io_nic *sp = dev->priv;
5326         if ((info->autoneg == AUTONEG_ENABLE) ||
5327             (info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
5328                 return -EINVAL;
5329         else {
5330                 s2io_close(sp->dev);
5331                 s2io_open(sp->dev);
5332         }
5333
5334         return 0;
5335 }
5336
5337 /**
5338  * s2io_ethtol_gset - Return link specific information.
5339  * @sp : private member of the device structure, pointer to the
5340  *      s2io_nic structure.
5341  * @info : pointer to the structure with parameters given by ethtool
5342  * to return link information.
5343  * Description:
5344  * Returns link specific information like speed, duplex etc.. to ethtool.
5345  * Return value :
5346  * return 0 on success.
5347  */
5348
5349 static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
5350 {
5351         struct s2io_nic *sp = dev->priv;
5352         info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5353         info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5354         info->port = PORT_FIBRE;
5355
5356         /* info->transceiver */
5357         info->transceiver = XCVR_EXTERNAL;
5358
5359         if (netif_carrier_ok(sp->dev)) {
5360                 info->speed = 10000;
5361                 info->duplex = DUPLEX_FULL;
5362         } else {
5363                 info->speed = -1;
5364                 info->duplex = -1;
5365         }
5366
5367         info->autoneg = AUTONEG_DISABLE;
5368         return 0;
5369 }
5370
5371 /**
5372  * s2io_ethtool_gdrvinfo - Returns driver specific information.
5373  * @sp : private member of the device structure, which is a pointer to the
5374  * s2io_nic structure.
5375  * @info : pointer to the structure with parameters given by ethtool to
5376  * return driver information.
5377  * Description:
5378  * Returns driver specefic information like name, version etc.. to ethtool.
5379  * Return value:
5380  *  void
5381  */
5382
5383 static void s2io_ethtool_gdrvinfo(struct net_device *dev,
5384                                   struct ethtool_drvinfo *info)
5385 {
5386         struct s2io_nic *sp = dev->priv;
5387
5388         strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
5389         strncpy(info->version, s2io_driver_version, sizeof(info->version));
5390         strncpy(info->fw_version, "", sizeof(info->fw_version));
5391         strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
5392         info->regdump_len = XENA_REG_SPACE;
5393         info->eedump_len = XENA_EEPROM_SPACE;
5394 }
5395
5396 /**
5397  *  s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
5398  *  @sp: private member of the device structure, which is a pointer to the
5399  *  s2io_nic structure.
5400  *  @regs : pointer to the structure with parameters given by ethtool for
5401  *  dumping the registers.
5402  *  @reg_space: The input argumnet into which all the registers are dumped.
5403  *  Description:
5404  *  Dumps the entire register space of xFrame NIC into the user given
5405  *  buffer area.
5406  * Return value :
5407  * void .
5408 */
5409
5410 static void s2io_ethtool_gregs(struct net_device *dev,
5411                                struct ethtool_regs *regs, void *space)
5412 {
5413         int i;
5414         u64 reg;
5415         u8 *reg_space = (u8 *) space;
5416         struct s2io_nic *sp = dev->priv;
5417
5418         regs->len = XENA_REG_SPACE;
5419         regs->version = sp->pdev->subsystem_device;
5420
5421         for (i = 0; i < regs->len; i += 8) {
5422                 reg = readq(sp->bar0 + i);
5423                 memcpy((reg_space + i), &reg, 8);
5424         }
5425 }
5426
5427 /**
5428  *  s2io_phy_id  - timer function that alternates adapter LED.
5429  *  @data : address of the private member of the device structure, which
5430  *  is a pointer to the s2io_nic structure, provided as an u32.
5431  * Description: This is actually the timer function that alternates the
5432  * adapter LED bit of the adapter control bit to set/reset every time on
5433  * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
5434  *  once every second.
5435 */
5436 static void s2io_phy_id(unsigned long data)
5437 {
5438         struct s2io_nic *sp = (struct s2io_nic *) data;
5439         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5440         u64 val64 = 0;
5441         u16 subid;
5442
5443         subid = sp->pdev->subsystem_device;
5444         if ((sp->device_type == XFRAME_II_DEVICE) ||
5445                    ((subid & 0xFF) >= 0x07)) {
5446                 val64 = readq(&bar0->gpio_control);
5447                 val64 ^= GPIO_CTRL_GPIO_0;
5448                 writeq(val64, &bar0->gpio_control);
5449         } else {
5450                 val64 = readq(&bar0->adapter_control);
5451                 val64 ^= ADAPTER_LED_ON;
5452                 writeq(val64, &bar0->adapter_control);
5453         }
5454
5455         mod_timer(&sp->id_timer, jiffies + HZ / 2);
5456 }
5457
5458 /**
5459  * s2io_ethtool_idnic - To physically identify the nic on the system.
5460  * @sp : private member of the device structure, which is a pointer to the
5461  * s2io_nic structure.
5462  * @id : pointer to the structure with identification parameters given by
5463  * ethtool.
5464  * Description: Used to physically identify the NIC on the system.
5465  * The Link LED will blink for a time specified by the user for
5466  * identification.
5467  * NOTE: The Link has to be Up to be able to blink the LED. Hence
5468  * identification is possible only if it's link is up.
5469  * Return value:
5470  * int , returns 0 on success
5471  */
5472
5473 static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
5474 {
5475         u64 val64 = 0, last_gpio_ctrl_val;
5476         struct s2io_nic *sp = dev->priv;
5477         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5478         u16 subid;
5479
5480         subid = sp->pdev->subsystem_device;
5481         last_gpio_ctrl_val = readq(&bar0->gpio_control);
5482         if ((sp->device_type == XFRAME_I_DEVICE) &&
5483                 ((subid & 0xFF) < 0x07)) {
5484                 val64 = readq(&bar0->adapter_control);
5485                 if (!(val64 & ADAPTER_CNTL_EN)) {
5486                         printk(KERN_ERR
5487                                "Adapter Link down, cannot blink LED\n");
5488                         return -EFAULT;
5489                 }
5490         }
5491         if (sp->id_timer.function == NULL) {
5492                 init_timer(&sp->id_timer);
5493                 sp->id_timer.function = s2io_phy_id;
5494                 sp->id_timer.data = (unsigned long) sp;
5495         }
5496         mod_timer(&sp->id_timer, jiffies);
5497         if (data)
5498                 msleep_interruptible(data * HZ);
5499         else
5500                 msleep_interruptible(MAX_FLICKER_TIME);
5501         del_timer_sync(&sp->id_timer);
5502
5503         if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
5504                 writeq(last_gpio_ctrl_val, &bar0->gpio_control);
5505                 last_gpio_ctrl_val = readq(&bar0->gpio_control);
5506         }
5507
5508         return 0;
5509 }
5510
5511 static void s2io_ethtool_gringparam(struct net_device *dev,
5512                                     struct ethtool_ringparam *ering)
5513 {
5514         struct s2io_nic *sp = dev->priv;
5515         int i,tx_desc_count=0,rx_desc_count=0;
5516
5517         if (sp->rxd_mode == RXD_MODE_1)
5518                 ering->rx_max_pending = MAX_RX_DESC_1;
5519         else if (sp->rxd_mode == RXD_MODE_3B)
5520                 ering->rx_max_pending = MAX_RX_DESC_2;
5521
5522         ering->tx_max_pending = MAX_TX_DESC;
5523         for (i = 0 ; i < sp->config.tx_fifo_num ; i++)
5524                 tx_desc_count += sp->config.tx_cfg[i].fifo_len;
5525
5526         DBG_PRINT(INFO_DBG,"\nmax txds : %d\n",sp->config.max_txds);
5527         ering->tx_pending = tx_desc_count;
5528         rx_desc_count = 0;
5529         for (i = 0 ; i < sp->config.rx_ring_num ; i++)
5530                 rx_desc_count += sp->config.rx_cfg[i].num_rxd;
5531
5532         ering->rx_pending = rx_desc_count;
5533
5534         ering->rx_mini_max_pending = 0;
5535         ering->rx_mini_pending = 0;
5536         if(sp->rxd_mode == RXD_MODE_1)
5537                 ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
5538         else if (sp->rxd_mode == RXD_MODE_3B)
5539                 ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
5540         ering->rx_jumbo_pending = rx_desc_count;
5541 }
5542
5543 /**
5544  * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
5545  * @sp : private member of the device structure, which is a pointer to the
5546  *      s2io_nic structure.
5547  * @ep : pointer to the structure with pause parameters given by ethtool.
5548  * Description:
5549  * Returns the Pause frame generation and reception capability of the NIC.
5550  * Return value:
5551  *  void
5552  */
5553 static void s2io_ethtool_getpause_data(struct net_device *dev,
5554                                        struct ethtool_pauseparam *ep)
5555 {
5556         u64 val64;
5557         struct s2io_nic *sp = dev->priv;
5558         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5559
5560         val64 = readq(&bar0->rmac_pause_cfg);
5561         if (val64 & RMAC_PAUSE_GEN_ENABLE)
5562                 ep->tx_pause = TRUE;
5563         if (val64 & RMAC_PAUSE_RX_ENABLE)
5564                 ep->rx_pause = TRUE;
5565         ep->autoneg = FALSE;
5566 }
5567
5568 /**
5569  * s2io_ethtool_setpause_data -  set/reset pause frame generation.
5570  * @sp : private member of the device structure, which is a pointer to the
5571  *      s2io_nic structure.
5572  * @ep : pointer to the structure with pause parameters given by ethtool.
5573  * Description:
5574  * It can be used to set or reset Pause frame generation or reception
5575  * support of the NIC.
5576  * Return value:
5577  * int, returns 0 on Success
5578  */
5579
5580 static int s2io_ethtool_setpause_data(struct net_device *dev,
5581                                struct ethtool_pauseparam *ep)
5582 {
5583         u64 val64;
5584         struct s2io_nic *sp = dev->priv;
5585         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5586
5587         val64 = readq(&bar0->rmac_pause_cfg);
5588         if (ep->tx_pause)
5589                 val64 |= RMAC_PAUSE_GEN_ENABLE;
5590         else
5591                 val64 &= ~RMAC_PAUSE_GEN_ENABLE;
5592         if (ep->rx_pause)
5593                 val64 |= RMAC_PAUSE_RX_ENABLE;
5594         else
5595                 val64 &= ~RMAC_PAUSE_RX_ENABLE;
5596         writeq(val64, &bar0->rmac_pause_cfg);
5597         return 0;
5598 }
5599
5600 /**
5601  * read_eeprom - reads 4 bytes of data from user given offset.
5602  * @sp : private member of the device structure, which is a pointer to the
5603  *      s2io_nic structure.
5604  * @off : offset at which the data must be written
5605  * @data : Its an output parameter where the data read at the given
5606  *      offset is stored.
5607  * Description:
5608  * Will read 4 bytes of data from the user given offset and return the
5609  * read data.
5610  * NOTE: Will allow to read only part of the EEPROM visible through the
5611  *   I2C bus.
5612  * Return value:
5613  *  -1 on failure and 0 on success.
5614  */
5615
5616 #define S2IO_DEV_ID             5
5617 static int read_eeprom(struct s2io_nic * sp, int off, u64 * data)
5618 {
5619         int ret = -1;
5620         u32 exit_cnt = 0;
5621         u64 val64;
5622         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5623
5624         if (sp->device_type == XFRAME_I_DEVICE) {
5625                 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
5626                     I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
5627                     I2C_CONTROL_CNTL_START;
5628                 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5629
5630                 while (exit_cnt < 5) {
5631                         val64 = readq(&bar0->i2c_control);
5632                         if (I2C_CONTROL_CNTL_END(val64)) {
5633                                 *data = I2C_CONTROL_GET_DATA(val64);
5634                                 ret = 0;
5635                                 break;
5636                         }
5637                         msleep(50);
5638                         exit_cnt++;
5639                 }
5640         }
5641
5642         if (sp->device_type == XFRAME_II_DEVICE) {
5643                 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5644                         SPI_CONTROL_BYTECNT(0x3) |
5645                         SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
5646                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5647                 val64 |= SPI_CONTROL_REQ;
5648                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5649                 while (exit_cnt < 5) {
5650                         val64 = readq(&bar0->spi_control);
5651                         if (val64 & SPI_CONTROL_NACK) {
5652                                 ret = 1;
5653                                 break;
5654                         } else if (val64 & SPI_CONTROL_DONE) {
5655                                 *data = readq(&bar0->spi_data);
5656                                 *data &= 0xffffff;
5657                                 ret = 0;
5658                                 break;
5659                         }
5660                         msleep(50);
5661                         exit_cnt++;
5662                 }
5663         }
5664         return ret;
5665 }
5666
5667 /**
5668  *  write_eeprom - actually writes the relevant part of the data value.
5669  *  @sp : private member of the device structure, which is a pointer to the
5670  *       s2io_nic structure.
5671  *  @off : offset at which the data must be written
5672  *  @data : The data that is to be written
5673  *  @cnt : Number of bytes of the data that are actually to be written into
5674  *  the Eeprom. (max of 3)
5675  * Description:
5676  *  Actually writes the relevant part of the data value into the Eeprom
5677  *  through the I2C bus.
5678  * Return value:
5679  *  0 on success, -1 on failure.
5680  */
5681
5682 static int write_eeprom(struct s2io_nic * sp, int off, u64 data, int cnt)
5683 {
5684         int exit_cnt = 0, ret = -1;
5685         u64 val64;
5686         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5687
5688         if (sp->device_type == XFRAME_I_DEVICE) {
5689                 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
5690                     I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) |
5691                     I2C_CONTROL_CNTL_START;
5692                 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5693
5694                 while (exit_cnt < 5) {
5695                         val64 = readq(&bar0->i2c_control);
5696                         if (I2C_CONTROL_CNTL_END(val64)) {
5697                                 if (!(val64 & I2C_CONTROL_NACK))
5698                                         ret = 0;
5699                                 break;
5700                         }
5701                         msleep(50);
5702                         exit_cnt++;
5703                 }
5704         }
5705
5706         if (sp->device_type == XFRAME_II_DEVICE) {
5707                 int write_cnt = (cnt == 8) ? 0 : cnt;
5708                 writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data);
5709
5710                 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5711                         SPI_CONTROL_BYTECNT(write_cnt) |
5712                         SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
5713                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5714                 val64 |= SPI_CONTROL_REQ;
5715                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5716                 while (exit_cnt < 5) {
5717                         val64 = readq(&bar0->spi_control);
5718                         if (val64 & SPI_CONTROL_NACK) {
5719                                 ret = 1;
5720                                 break;
5721                         } else if (val64 & SPI_CONTROL_DONE) {
5722                                 ret = 0;
5723                                 break;
5724                         }
5725                         msleep(50);
5726                         exit_cnt++;
5727                 }
5728         }
5729         return ret;
5730 }
5731 static void s2io_vpd_read(struct s2io_nic *nic)
5732 {
5733         u8 *vpd_data;
5734         u8 data;
5735         int i=0, cnt, fail = 0;
5736         int vpd_addr = 0x80;
5737
5738         if (nic->device_type == XFRAME_II_DEVICE) {
5739                 strcpy(nic->product_name, "Xframe II 10GbE network adapter");
5740                 vpd_addr = 0x80;
5741         }
5742         else {
5743                 strcpy(nic->product_name, "Xframe I 10GbE network adapter");
5744                 vpd_addr = 0x50;
5745         }
5746         strcpy(nic->serial_num, "NOT AVAILABLE");
5747
5748         vpd_data = kmalloc(256, GFP_KERNEL);
5749         if (!vpd_data) {
5750                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
5751                 return;
5752         }
5753         nic->mac_control.stats_info->sw_stat.mem_allocated += 256;
5754
5755         for (i = 0; i < 256; i +=4 ) {
5756                 pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
5757                 pci_read_config_byte(nic->pdev,  (vpd_addr + 2), &data);
5758                 pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
5759                 for (cnt = 0; cnt <5; cnt++) {
5760                         msleep(2);
5761                         pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
5762                         if (data == 0x80)
5763                                 break;
5764                 }
5765                 if (cnt >= 5) {
5766                         DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
5767                         fail = 1;
5768                         break;
5769                 }
5770                 pci_read_config_dword(nic->pdev,  (vpd_addr + 4),
5771                                       (u32 *)&vpd_data[i]);
5772         }
5773
5774         if(!fail) {
5775                 /* read serial number of adapter */
5776                 for (cnt = 0; cnt < 256; cnt++) {
5777                 if ((vpd_data[cnt] == 'S') &&
5778                         (vpd_data[cnt+1] == 'N') &&
5779                         (vpd_data[cnt+2] < VPD_STRING_LEN)) {
5780                                 memset(nic->serial_num, 0, VPD_STRING_LEN);
5781                                 memcpy(nic->serial_num, &vpd_data[cnt + 3],
5782                                         vpd_data[cnt+2]);
5783                                 break;
5784                         }
5785                 }
5786         }
5787
5788         if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) {
5789                 memset(nic->product_name, 0, vpd_data[1]);
5790                 memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
5791         }
5792         kfree(vpd_data);
5793         nic->mac_control.stats_info->sw_stat.mem_freed += 256;
5794 }
5795
5796 /**
5797  *  s2io_ethtool_geeprom  - reads the value stored in the Eeprom.
5798  *  @sp : private member of the device structure, which is a pointer to the *       s2io_nic structure.
5799  *  @eeprom : pointer to the user level structure provided by ethtool,
5800  *  containing all relevant information.
5801  *  @data_buf : user defined value to be written into Eeprom.
5802  *  Description: Reads the values stored in the Eeprom at given offset
5803  *  for a given length. Stores these values int the input argument data
5804  *  buffer 'data_buf' and returns these to the caller (ethtool.)
5805  *  Return value:
5806  *  int  0 on success
5807  */
5808
5809 static int s2io_ethtool_geeprom(struct net_device *dev,
5810                          struct ethtool_eeprom *eeprom, u8 * data_buf)
5811 {
5812         u32 i, valid;
5813         u64 data;
5814         struct s2io_nic *sp = dev->priv;
5815
5816         eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
5817
5818         if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
5819                 eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
5820
5821         for (i = 0; i < eeprom->len; i += 4) {
5822                 if (read_eeprom(sp, (eeprom->offset + i), &data)) {
5823                         DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
5824                         return -EFAULT;
5825                 }
5826                 valid = INV(data);
5827                 memcpy((data_buf + i), &valid, 4);
5828         }
5829         return 0;
5830 }
5831
5832 /**
5833  *  s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
5834  *  @sp : private member of the device structure, which is a pointer to the
5835  *  s2io_nic structure.
5836  *  @eeprom : pointer to the user level structure provided by ethtool,
5837  *  containing all relevant information.
5838  *  @data_buf ; user defined value to be written into Eeprom.
5839  *  Description:
5840  *  Tries to write the user provided value in the Eeprom, at the offset
5841  *  given by the user.
5842  *  Return value:
5843  *  0 on success, -EFAULT on failure.
5844  */
5845
5846 static int s2io_ethtool_seeprom(struct net_device *dev,
5847                                 struct ethtool_eeprom *eeprom,
5848                                 u8 * data_buf)
5849 {
5850         int len = eeprom->len, cnt = 0;
5851         u64 valid = 0, data;
5852         struct s2io_nic *sp = dev->priv;
5853
5854         if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
5855                 DBG_PRINT(ERR_DBG,
5856                           "ETHTOOL_WRITE_EEPROM Err: Magic value ");
5857                 DBG_PRINT(ERR_DBG, "is wrong, Its not 0x%x\n",
5858                           eeprom->magic);
5859                 return -EFAULT;
5860         }
5861
5862         while (len) {
5863                 data = (u32) data_buf[cnt] & 0x000000FF;
5864                 if (data) {
5865                         valid = (u32) (data << 24);
5866                 } else
5867                         valid = data;
5868
5869                 if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
5870                         DBG_PRINT(ERR_DBG,
5871                                   "ETHTOOL_WRITE_EEPROM Err: Cannot ");
5872                         DBG_PRINT(ERR_DBG,
5873                                   "write into the specified offset\n");
5874                         return -EFAULT;
5875                 }
5876                 cnt++;
5877                 len--;
5878         }
5879
5880         return 0;
5881 }
5882
5883 /**
5884  * s2io_register_test - reads and writes into all clock domains.
5885  * @sp : private member of the device structure, which is a pointer to the
5886  * s2io_nic structure.
5887  * @data : variable that returns the result of each of the test conducted b
5888  * by the driver.
5889  * Description:
5890  * Read and write into all clock domains. The NIC has 3 clock domains,
5891  * see that registers in all the three regions are accessible.
5892  * Return value:
5893  * 0 on success.
5894  */
5895
5896 static int s2io_register_test(struct s2io_nic * sp, uint64_t * data)
5897 {
5898         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5899         u64 val64 = 0, exp_val;
5900         int fail = 0;
5901
5902         val64 = readq(&bar0->pif_rd_swapper_fb);
5903         if (val64 != 0x123456789abcdefULL) {
5904                 fail = 1;
5905                 DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
5906         }
5907
5908         val64 = readq(&bar0->rmac_pause_cfg);
5909         if (val64 != 0xc000ffff00000000ULL) {
5910                 fail = 1;
5911                 DBG_PRINT(INFO_DBG, "Read Test level 2 fails\n");
5912         }
5913
5914         val64 = readq(&bar0->rx_queue_cfg);
5915         if (sp->device_type == XFRAME_II_DEVICE)
5916                 exp_val = 0x0404040404040404ULL;
5917         else
5918                 exp_val = 0x0808080808080808ULL;
5919         if (val64 != exp_val) {
5920                 fail = 1;
5921                 DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
5922         }
5923
5924         val64 = readq(&bar0->xgxs_efifo_cfg);
5925         if (val64 != 0x000000001923141EULL) {
5926                 fail = 1;
5927                 DBG_PRINT(INFO_DBG, "Read Test level 4 fails\n");
5928         }
5929
5930         val64 = 0x5A5A5A5A5A5A5A5AULL;
5931         writeq(val64, &bar0->xmsi_data);
5932         val64 = readq(&bar0->xmsi_data);
5933         if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
5934                 fail = 1;
5935                 DBG_PRINT(ERR_DBG, "Write Test level 1 fails\n");
5936         }
5937
5938         val64 = 0xA5A5A5A5A5A5A5A5ULL;
5939         writeq(val64, &bar0->xmsi_data);
5940         val64 = readq(&bar0->xmsi_data);
5941         if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
5942                 fail = 1;
5943                 DBG_PRINT(ERR_DBG, "Write Test level 2 fails\n");
5944         }
5945
5946         *data = fail;
5947         return fail;
5948 }
5949
5950 /**
5951  * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
5952  * @sp : private member of the device structure, which is a pointer to the
5953  * s2io_nic structure.
5954  * @data:variable that returns the result of each of the test conducted by
5955  * the driver.
5956  * Description:
5957  * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
5958  * register.
5959  * Return value:
5960  * 0 on success.
5961  */
5962
5963 static int s2io_eeprom_test(struct s2io_nic * sp, uint64_t * data)
5964 {
5965         int fail = 0;
5966         u64 ret_data, org_4F0, org_7F0;
5967         u8 saved_4F0 = 0, saved_7F0 = 0;
5968         struct net_device *dev = sp->dev;
5969
5970         /* Test Write Error at offset 0 */
5971         /* Note that SPI interface allows write access to all areas
5972          * of EEPROM. Hence doing all negative testing only for Xframe I.
5973          */
5974         if (sp->device_type == XFRAME_I_DEVICE)
5975                 if (!write_eeprom(sp, 0, 0, 3))
5976                         fail = 1;
5977
5978         /* Save current values at offsets 0x4F0 and 0x7F0 */
5979         if (!read_eeprom(sp, 0x4F0, &org_4F0))
5980                 saved_4F0 = 1;
5981         if (!read_eeprom(sp, 0x7F0, &org_7F0))
5982                 saved_7F0 = 1;
5983
5984         /* Test Write at offset 4f0 */
5985         if (write_eeprom(sp, 0x4F0, 0x012345, 3))
5986                 fail = 1;
5987         if (read_eeprom(sp, 0x4F0, &ret_data))
5988                 fail = 1;
5989
5990         if (ret_data != 0x012345) {
5991                 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
5992                         "Data written %llx Data read %llx\n",
5993                         dev->name, (unsigned long long)0x12345,
5994                         (unsigned long long)ret_data);
5995                 fail = 1;
5996         }
5997
5998         /* Reset the EEPROM data go FFFF */
5999         write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
6000
6001         /* Test Write Request Error at offset 0x7c */
6002         if (sp->device_type == XFRAME_I_DEVICE)
6003                 if (!write_eeprom(sp, 0x07C, 0, 3))
6004                         fail = 1;
6005
6006         /* Test Write Request at offset 0x7f0 */
6007         if (write_eeprom(sp, 0x7F0, 0x012345, 3))
6008                 fail = 1;
6009         if (read_eeprom(sp, 0x7F0, &ret_data))
6010                 fail = 1;
6011
6012         if (ret_data != 0x012345) {
6013                 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
6014                         "Data written %llx Data read %llx\n",
6015                         dev->name, (unsigned long long)0x12345,
6016                         (unsigned long long)ret_data);
6017                 fail = 1;
6018         }
6019
6020         /* Reset the EEPROM data go FFFF */
6021         write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
6022
6023         if (sp->device_type == XFRAME_I_DEVICE) {
6024                 /* Test Write Error at offset 0x80 */
6025                 if (!write_eeprom(sp, 0x080, 0, 3))
6026                         fail = 1;
6027
6028                 /* Test Write Error at offset 0xfc */
6029                 if (!write_eeprom(sp, 0x0FC, 0, 3))
6030                         fail = 1;
6031
6032                 /* Test Write Error at offset 0x100 */
6033                 if (!write_eeprom(sp, 0x100, 0, 3))
6034                         fail = 1;
6035
6036                 /* Test Write Error at offset 4ec */
6037                 if (!write_eeprom(sp, 0x4EC, 0, 3))
6038                         fail = 1;
6039         }
6040
6041         /* Restore values at offsets 0x4F0 and 0x7F0 */
6042         if (saved_4F0)
6043                 write_eeprom(sp, 0x4F0, org_4F0, 3);
6044         if (saved_7F0)
6045                 write_eeprom(sp, 0x7F0, org_7F0, 3);
6046
6047         *data = fail;
6048         return fail;
6049 }
6050
6051 /**
6052  * s2io_bist_test - invokes the MemBist test of the card .
6053  * @sp : private member of the device structure, which is a pointer to the
6054  * s2io_nic structure.
6055  * @data:variable that returns the result of each of the test conducted by
6056  * the driver.
6057  * Description:
6058  * This invokes the MemBist test of the card. We give around
6059  * 2 secs time for the Test to complete. If it's still not complete
6060  * within this peiod, we consider that the test failed.
6061  * Return value:
6062  * 0 on success and -1 on failure.
6063  */
6064
6065 static int s2io_bist_test(struct s2io_nic * sp, uint64_t * data)
6066 {
6067         u8 bist = 0;
6068         int cnt = 0, ret = -1;
6069
6070         pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6071         bist |= PCI_BIST_START;
6072         pci_write_config_word(sp->pdev, PCI_BIST, bist);
6073
6074         while (cnt < 20) {
6075                 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6076                 if (!(bist & PCI_BIST_START)) {
6077                         *data = (bist & PCI_BIST_CODE_MASK);
6078                         ret = 0;
6079                         break;
6080                 }
6081                 msleep(100);
6082                 cnt++;
6083         }
6084
6085         return ret;
6086 }
6087
6088 /**
6089  * s2io-link_test - verifies the link state of the nic
6090  * @sp ; private member of the device structure, which is a pointer to the
6091  * s2io_nic structure.
6092  * @data: variable that returns the result of each of the test conducted by
6093  * the driver.
6094  * Description:
6095  * The function verifies the link state of the NIC and updates the input
6096  * argument 'data' appropriately.
6097  * Return value:
6098  * 0 on success.
6099  */
6100
6101 static int s2io_link_test(struct s2io_nic * sp, uint64_t * data)
6102 {
6103         struct XENA_dev_config __iomem *bar0 = sp->bar0;
6104         u64 val64;
6105
6106         val64 = readq(&bar0->adapter_status);
6107         if(!(LINK_IS_UP(val64)))
6108                 *data = 1;
6109         else
6110                 *data = 0;
6111
6112         return *data;
6113 }
6114
6115 /**
6116  * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
6117  * @sp - private member of the device structure, which is a pointer to the
6118  * s2io_nic structure.
6119  * @data - variable that returns the result of each of the test
6120  * conducted by the driver.
6121  * Description:
6122  *  This is one of the offline test that tests the read and write
6123  *  access to the RldRam chip on the NIC.
6124  * Return value:
6125  *  0 on success.
6126  */
6127
6128 static int s2io_rldram_test(struct s2io_nic * sp, uint64_t * data)
6129 {
6130         struct XENA_dev_config __iomem *bar0 = sp->bar0;
6131         u64 val64;
6132         int cnt, iteration = 0, test_fail = 0;
6133
6134         val64 = readq(&bar0->adapter_control);
6135         val64 &= ~ADAPTER_ECC_EN;
6136         writeq(val64, &bar0->adapter_control);
6137
6138         val64 = readq(&bar0->mc_rldram_test_ctrl);
6139         val64 |= MC_RLDRAM_TEST_MODE;
6140         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6141
6142         val64 = readq(&bar0->mc_rldram_mrs);
6143         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
6144         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6145
6146         val64 |= MC_RLDRAM_MRS_ENABLE;
6147         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6148
6149         while (iteration < 2) {
6150                 val64 = 0x55555555aaaa0000ULL;
6151                 if (iteration == 1) {
6152                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6153                 }
6154                 writeq(val64, &bar0->mc_rldram_test_d0);
6155
6156                 val64 = 0xaaaa5a5555550000ULL;
6157                 if (iteration == 1) {
6158                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6159                 }
6160                 writeq(val64, &bar0->mc_rldram_test_d1);
6161
6162                 val64 = 0x55aaaaaaaa5a0000ULL;
6163                 if (iteration == 1) {
6164                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6165                 }
6166                 writeq(val64, &bar0->mc_rldram_test_d2);
6167
6168                 val64 = (u64) (0x0000003ffffe0100ULL);
6169                 writeq(val64, &bar0->mc_rldram_test_add);
6170
6171                 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
6172                         MC_RLDRAM_TEST_GO;
6173                 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6174
6175                 for (cnt = 0; cnt < 5; cnt++) {
6176                         val64 = readq(&bar0->mc_rldram_test_ctrl);
6177                         if (val64 & MC_RLDRAM_TEST_DONE)
6178                                 break;
6179                         msleep(200);
6180                 }
6181
6182                 if (cnt == 5)
6183                         break;
6184
6185                 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
6186                 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6187
6188                 for (cnt = 0; cnt < 5; cnt++) {
6189                         val64 = readq(&bar0->mc_rldram_test_ctrl);
6190                         if (val64 & MC_RLDRAM_TEST_DONE)
6191                                 break;
6192                         msleep(500);
6193                 }
6194
6195                 if (cnt == 5)
6196                         break;
6197
6198                 val64 = readq(&bar0->mc_rldram_test_ctrl);
6199                 if (!(val64 & MC_RLDRAM_TEST_PASS))
6200                         test_fail = 1;
6201
6202                 iteration++;
6203         }
6204
6205         *data = test_fail;
6206
6207         /* Bring the adapter out of test mode */
6208         SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
6209
6210         return test_fail;
6211 }
6212
6213 /**
6214  *  s2io_ethtool_test - conducts 6 tsets to determine the health of card.
6215  *  @sp : private member of the device structure, which is a pointer to the
6216  *  s2io_nic structure.
6217  *  @ethtest : pointer to a ethtool command specific structure that will be
6218  *  returned to the user.
6219  *  @data : variable that returns the result of each of the test
6220  * conducted by the driver.
6221  * Description:
6222  *  This function conducts 6 tests ( 4 offline and 2 online) to determine
6223  *  the health of the card.
6224  * Return value:
6225  *  void
6226  */
6227
6228 static void s2io_ethtool_test(struct net_device *dev,
6229                               struct ethtool_test *ethtest,
6230                               uint64_t * data)
6231 {
6232         struct s2io_nic *sp = dev->priv;
6233         int orig_state = netif_running(sp->dev);
6234
6235         if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
6236                 /* Offline Tests. */
6237                 if (orig_state)
6238                         s2io_close(sp->dev);
6239
6240                 if (s2io_register_test(sp, &data[0]))
6241                         ethtest->flags |= ETH_TEST_FL_FAILED;
6242
6243                 s2io_reset(sp);
6244
6245                 if (s2io_rldram_test(sp, &data[3]))
6246                         ethtest->flags |= ETH_TEST_FL_FAILED;
6247
6248                 s2io_reset(sp);
6249
6250                 if (s2io_eeprom_test(sp, &data[1]))
6251                         ethtest->flags |= ETH_TEST_FL_FAILED;
6252
6253                 if (s2io_bist_test(sp, &data[4]))
6254                         ethtest->flags |= ETH_TEST_FL_FAILED;
6255
6256                 if (orig_state)
6257                         s2io_open(sp->dev);
6258
6259                 data[2] = 0;
6260         } else {
6261                 /* Online Tests. */
6262                 if (!orig_state) {
6263                         DBG_PRINT(ERR_DBG,
6264                                   "%s: is not up, cannot run test\n",
6265                                   dev->name);
6266                         data[0] = -1;
6267                         data[1] = -1;
6268                         data[2] = -1;
6269                         data[3] = -1;
6270                         data[4] = -1;
6271                 }
6272
6273                 if (s2io_link_test(sp, &data[2]))
6274                         ethtest->flags |= ETH_TEST_FL_FAILED;
6275
6276                 data[0] = 0;
6277                 data[1] = 0;
6278                 data[3] = 0;
6279                 data[4] = 0;
6280         }
6281 }
6282
6283 static void s2io_get_ethtool_stats(struct net_device *dev,
6284                                    struct ethtool_stats *estats,
6285                                    u64 * tmp_stats)
6286 {
6287         int i = 0, k;
6288         struct s2io_nic *sp = dev->priv;
6289         struct stat_block *stat_info = sp->mac_control.stats_info;
6290
6291         s2io_updt_stats(sp);
6292         tmp_stats[i++] =
6293                 (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32  |
6294                 le32_to_cpu(stat_info->tmac_frms);
6295         tmp_stats[i++] =
6296                 (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
6297                 le32_to_cpu(stat_info->tmac_data_octets);
6298         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
6299         tmp_stats[i++] =
6300                 (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
6301                 le32_to_cpu(stat_info->tmac_mcst_frms);
6302         tmp_stats[i++] =
6303                 (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
6304                 le32_to_cpu(stat_info->tmac_bcst_frms);
6305         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
6306         tmp_stats[i++] =
6307                 (u64)le32_to_cpu(stat_info->tmac_ttl_octets_oflow) << 32 |
6308                 le32_to_cpu(stat_info->tmac_ttl_octets);
6309         tmp_stats[i++] =
6310                 (u64)le32_to_cpu(stat_info->tmac_ucst_frms_oflow) << 32 |
6311                 le32_to_cpu(stat_info->tmac_ucst_frms);
6312         tmp_stats[i++] =
6313                 (u64)le32_to_cpu(stat_info->tmac_nucst_frms_oflow) << 32 |
6314                 le32_to_cpu(stat_info->tmac_nucst_frms);
6315         tmp_stats[i++] =
6316                 (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
6317                 le32_to_cpu(stat_info->tmac_any_err_frms);
6318         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_ttl_less_fb_octets);
6319         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
6320         tmp_stats[i++] =
6321                 (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
6322                 le32_to_cpu(stat_info->tmac_vld_ip);
6323         tmp_stats[i++] =
6324                 (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
6325                 le32_to_cpu(stat_info->tmac_drop_ip);
6326         tmp_stats[i++] =
6327                 (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
6328                 le32_to_cpu(stat_info->tmac_icmp);
6329         tmp_stats[i++] =
6330                 (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
6331                 le32_to_cpu(stat_info->tmac_rst_tcp);
6332         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
6333         tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
6334                 le32_to_cpu(stat_info->tmac_udp);
6335         tmp_stats[i++] =
6336                 (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
6337                 le32_to_cpu(stat_info->rmac_vld_frms);
6338         tmp_stats[i++] =
6339                 (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
6340                 le32_to_cpu(stat_info->rmac_data_octets);
6341         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
6342         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
6343         tmp_stats[i++] =
6344                 (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
6345                 le32_to_cpu(stat_info->rmac_vld_mcst_frms);
6346         tmp_stats[i++] =
6347                 (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
6348                 le32_to_cpu(stat_info->rmac_vld_bcst_frms);
6349         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
6350         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_out_rng_len_err_frms);
6351         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
6352         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
6353         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_unsup_ctrl_frms);
6354         tmp_stats[i++] =
6355                 (u64)le32_to_cpu(stat_info->rmac_ttl_octets_oflow) << 32 |
6356                 le32_to_cpu(stat_info->rmac_ttl_octets);
6357         tmp_stats[i++] =
6358                 (u64)le32_to_cpu(stat_info->rmac_accepted_ucst_frms_oflow)
6359                 << 32 | le32_to_cpu(stat_info->rmac_accepted_ucst_frms);
6360         tmp_stats[i++] =
6361                 (u64)le32_to_cpu(stat_info->rmac_accepted_nucst_frms_oflow)
6362                  << 32 | le32_to_cpu(stat_info->rmac_accepted_nucst_frms);
6363         tmp_stats[i++] =
6364                 (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
6365                 le32_to_cpu(stat_info->rmac_discarded_frms);
6366         tmp_stats[i++] =
6367                 (u64)le32_to_cpu(stat_info->rmac_drop_events_oflow)
6368                  << 32 | le32_to_cpu(stat_info->rmac_drop_events);
6369         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_less_fb_octets);
6370         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_frms);
6371         tmp_stats[i++] =
6372                 (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
6373                 le32_to_cpu(stat_info->rmac_usized_frms);
6374         tmp_stats[i++] =
6375                 (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
6376                 le32_to_cpu(stat_info->rmac_osized_frms);
6377         tmp_stats[i++] =
6378                 (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
6379                 le32_to_cpu(stat_info->rmac_frag_frms);
6380         tmp_stats[i++] =
6381                 (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
6382                 le32_to_cpu(stat_info->rmac_jabber_frms);
6383         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_64_frms);
6384         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_65_127_frms);
6385         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_128_255_frms);
6386         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_256_511_frms);
6387         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_512_1023_frms);
6388         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_1024_1518_frms);
6389         tmp_stats[i++] =
6390                 (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
6391                 le32_to_cpu(stat_info->rmac_ip);
6392         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
6393         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
6394         tmp_stats[i++] =
6395                 (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
6396                 le32_to_cpu(stat_info->rmac_drop_ip);
6397         tmp_stats[i++] =
6398                 (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
6399                 le32_to_cpu(stat_info->rmac_icmp);
6400         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
6401         tmp_stats[i++] =
6402                 (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
6403                 le32_to_cpu(stat_info->rmac_udp);
6404         tmp_stats[i++] =
6405                 (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
6406                 le32_to_cpu(stat_info->rmac_err_drp_udp);
6407         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_err_sym);
6408         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q0);
6409         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q1);
6410         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q2);
6411         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q3);
6412         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q4);
6413         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q5);
6414         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q6);
6415         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q7);
6416         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q0);
6417         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q1);
6418         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q2);
6419         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q3);
6420         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q4);
6421         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q5);
6422         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q6);
6423         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q7);
6424         tmp_stats[i++] =
6425                 (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
6426                 le32_to_cpu(stat_info->rmac_pause_cnt);
6427         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_data_err_cnt);
6428         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_ctrl_err_cnt);
6429         tmp_stats[i++] =
6430                 (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
6431                 le32_to_cpu(stat_info->rmac_accepted_ip);
6432         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
6433         tmp_stats[i++] = le32_to_cpu(stat_info->rd_req_cnt);
6434         tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_cnt);
6435         tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_rtry_cnt);
6436         tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_cnt);
6437         tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_rd_ack_cnt);
6438         tmp_stats[i++] = le32_to_cpu(stat_info->wr_req_cnt);
6439         tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_cnt);
6440         tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_rtry_cnt);
6441         tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_cnt);
6442         tmp_stats[i++] = le32_to_cpu(stat_info->wr_disc_cnt);
6443         tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_wr_ack_cnt);
6444         tmp_stats[i++] = le32_to_cpu(stat_info->txp_wr_cnt);
6445         tmp_stats[i++] = le32_to_cpu(stat_info->txd_rd_cnt);
6446         tmp_stats[i++] = le32_to_cpu(stat_info->txd_wr_cnt);
6447         tmp_stats[i++] = le32_to_cpu(stat_info->rxd_rd_cnt);
6448         tmp_stats[i++] = le32_to_cpu(stat_info->rxd_wr_cnt);
6449         tmp_stats[i++] = le32_to_cpu(stat_info->txf_rd_cnt);
6450         tmp_stats[i++] = le32_to_cpu(stat_info->rxf_wr_cnt);
6451
6452         /* Enhanced statistics exist only for Hercules */
6453         if(sp->device_type == XFRAME_II_DEVICE) {
6454                 tmp_stats[i++] =
6455                                 le64_to_cpu(stat_info->rmac_ttl_1519_4095_frms);
6456                 tmp_stats[i++] =
6457                                 le64_to_cpu(stat_info->rmac_ttl_4096_8191_frms);
6458                 tmp_stats[i++] =
6459                                 le64_to_cpu(stat_info->rmac_ttl_8192_max_frms);
6460                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_gt_max_frms);
6461                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_osized_alt_frms);
6462                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_jabber_alt_frms);
6463                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_gt_max_alt_frms);
6464                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_vlan_frms);
6465                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_len_discard);
6466                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_fcs_discard);
6467                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pf_discard);
6468                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_da_discard);
6469                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_red_discard);
6470                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_rts_discard);
6471                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ingm_full_discard);
6472                 tmp_stats[i++] = le32_to_cpu(stat_info->link_fault_cnt);
6473         }
6474
6475         tmp_stats[i++] = 0;
6476         tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
6477         tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
6478         tmp_stats[i++] = stat_info->sw_stat.parity_err_cnt;
6479         tmp_stats[i++] = stat_info->sw_stat.serious_err_cnt;
6480         tmp_stats[i++] = stat_info->sw_stat.soft_reset_cnt;
6481         tmp_stats[i++] = stat_info->sw_stat.fifo_full_cnt;
6482         for (k = 0; k < MAX_RX_RINGS; k++)
6483                 tmp_stats[i++] = stat_info->sw_stat.ring_full_cnt[k];
6484         tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_high;
6485         tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_low;
6486         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_high;
6487         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_low;
6488         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_high;
6489         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_low;
6490         tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_high;
6491         tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_low;
6492         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_high;
6493         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_low;
6494         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_high;
6495         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_low;
6496         tmp_stats[i++] = stat_info->sw_stat.clubbed_frms_cnt;
6497         tmp_stats[i++] = stat_info->sw_stat.sending_both;
6498         tmp_stats[i++] = stat_info->sw_stat.outof_sequence_pkts;
6499         tmp_stats[i++] = stat_info->sw_stat.flush_max_pkts;
6500         if (stat_info->sw_stat.num_aggregations) {
6501                 u64 tmp = stat_info->sw_stat.sum_avg_pkts_aggregated;
6502                 int count = 0;
6503                 /*
6504                  * Since 64-bit divide does not work on all platforms,
6505                  * do repeated subtraction.
6506                  */
6507                 while (tmp >= stat_info->sw_stat.num_aggregations) {
6508                         tmp -= stat_info->sw_stat.num_aggregations;
6509                         count++;
6510                 }
6511                 tmp_stats[i++] = count;
6512         }
6513         else
6514                 tmp_stats[i++] = 0;
6515         tmp_stats[i++] = stat_info->sw_stat.mem_alloc_fail_cnt;
6516         tmp_stats[i++] = stat_info->sw_stat.pci_map_fail_cnt;
6517         tmp_stats[i++] = stat_info->sw_stat.watchdog_timer_cnt;
6518         tmp_stats[i++] = stat_info->sw_stat.mem_allocated;
6519         tmp_stats[i++] = stat_info->sw_stat.mem_freed;
6520         tmp_stats[i++] = stat_info->sw_stat.link_up_cnt;
6521         tmp_stats[i++] = stat_info->sw_stat.link_down_cnt;
6522         tmp_stats[i++] = stat_info->sw_stat.link_up_time;
6523         tmp_stats[i++] = stat_info->sw_stat.link_down_time;
6524
6525         tmp_stats[i++] = stat_info->sw_stat.tx_buf_abort_cnt;
6526         tmp_stats[i++] = stat_info->sw_stat.tx_desc_abort_cnt;
6527         tmp_stats[i++] = stat_info->sw_stat.tx_parity_err_cnt;
6528         tmp_stats[i++] = stat_info->sw_stat.tx_link_loss_cnt;
6529         tmp_stats[i++] = stat_info->sw_stat.tx_list_proc_err_cnt;
6530
6531         tmp_stats[i++] = stat_info->sw_stat.rx_parity_err_cnt;
6532         tmp_stats[i++] = stat_info->sw_stat.rx_abort_cnt;
6533         tmp_stats[i++] = stat_info->sw_stat.rx_parity_abort_cnt;
6534         tmp_stats[i++] = stat_info->sw_stat.rx_rda_fail_cnt;
6535         tmp_stats[i++] = stat_info->sw_stat.rx_unkn_prot_cnt;
6536         tmp_stats[i++] = stat_info->sw_stat.rx_fcs_err_cnt;
6537         tmp_stats[i++] = stat_info->sw_stat.rx_buf_size_err_cnt;
6538         tmp_stats[i++] = stat_info->sw_stat.rx_rxd_corrupt_cnt;
6539         tmp_stats[i++] = stat_info->sw_stat.rx_unkn_err_cnt;
6540         tmp_stats[i++] = stat_info->sw_stat.tda_err_cnt;
6541         tmp_stats[i++] = stat_info->sw_stat.pfc_err_cnt;
6542         tmp_stats[i++] = stat_info->sw_stat.pcc_err_cnt;
6543         tmp_stats[i++] = stat_info->sw_stat.tti_err_cnt;
6544         tmp_stats[i++] = stat_info->sw_stat.tpa_err_cnt;
6545         tmp_stats[i++] = stat_info->sw_stat.sm_err_cnt;
6546         tmp_stats[i++] = stat_info->sw_stat.lso_err_cnt;
6547         tmp_stats[i++] = stat_info->sw_stat.mac_tmac_err_cnt;
6548         tmp_stats[i++] = stat_info->sw_stat.mac_rmac_err_cnt;
6549         tmp_stats[i++] = stat_info->sw_stat.xgxs_txgxs_err_cnt;
6550         tmp_stats[i++] = stat_info->sw_stat.xgxs_rxgxs_err_cnt;
6551         tmp_stats[i++] = stat_info->sw_stat.rc_err_cnt;
6552         tmp_stats[i++] = stat_info->sw_stat.prc_pcix_err_cnt;
6553         tmp_stats[i++] = stat_info->sw_stat.rpa_err_cnt;
6554         tmp_stats[i++] = stat_info->sw_stat.rda_err_cnt;
6555         tmp_stats[i++] = stat_info->sw_stat.rti_err_cnt;
6556         tmp_stats[i++] = stat_info->sw_stat.mc_err_cnt;
6557 }
6558
6559 static int s2io_ethtool_get_regs_len(struct net_device *dev)
6560 {
6561         return (XENA_REG_SPACE);
6562 }
6563
6564
6565 static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
6566 {
6567         struct s2io_nic *sp = dev->priv;
6568
6569         return (sp->rx_csum);
6570 }
6571
6572 static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
6573 {
6574         struct s2io_nic *sp = dev->priv;
6575
6576         if (data)
6577                 sp->rx_csum = 1;
6578         else
6579                 sp->rx_csum = 0;
6580
6581         return 0;
6582 }
6583
6584 static int s2io_get_eeprom_len(struct net_device *dev)
6585 {
6586         return (XENA_EEPROM_SPACE);
6587 }
6588
6589 static int s2io_get_sset_count(struct net_device *dev, int sset)
6590 {
6591         struct s2io_nic *sp = dev->priv;
6592
6593         switch (sset) {
6594         case ETH_SS_TEST:
6595                 return S2IO_TEST_LEN;
6596         case ETH_SS_STATS:
6597                 switch(sp->device_type) {
6598                 case XFRAME_I_DEVICE:
6599                         return XFRAME_I_STAT_LEN;
6600                 case XFRAME_II_DEVICE:
6601                         return XFRAME_II_STAT_LEN;
6602                 default:
6603                         return 0;
6604                 }
6605         default:
6606                 return -EOPNOTSUPP;
6607         }
6608 }
6609
6610 static void s2io_ethtool_get_strings(struct net_device *dev,
6611                                      u32 stringset, u8 * data)
6612 {
6613         int stat_size = 0;
6614         struct s2io_nic *sp = dev->priv;
6615
6616         switch (stringset) {
6617         case ETH_SS_TEST:
6618                 memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
6619                 break;
6620         case ETH_SS_STATS:
6621                 stat_size = sizeof(ethtool_xena_stats_keys);
6622                 memcpy(data, &ethtool_xena_stats_keys,stat_size);
6623                 if(sp->device_type == XFRAME_II_DEVICE) {
6624                         memcpy(data + stat_size,
6625                                 &ethtool_enhanced_stats_keys,
6626                                 sizeof(ethtool_enhanced_stats_keys));
6627                         stat_size += sizeof(ethtool_enhanced_stats_keys);
6628                 }
6629
6630                 memcpy(data + stat_size, &ethtool_driver_stats_keys,
6631                         sizeof(ethtool_driver_stats_keys));
6632         }
6633 }
6634
6635 static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
6636 {
6637         if (data)
6638                 dev->features |= NETIF_F_IP_CSUM;
6639         else
6640                 dev->features &= ~NETIF_F_IP_CSUM;
6641
6642         return 0;
6643 }
6644
6645 static u32 s2io_ethtool_op_get_tso(struct net_device *dev)
6646 {
6647         return (dev->features & NETIF_F_TSO) != 0;
6648 }
6649 static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data)
6650 {
6651         if (data)
6652                 dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
6653         else
6654                 dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
6655
6656         return 0;
6657 }
6658
6659 static const struct ethtool_ops netdev_ethtool_ops = {
6660         .get_settings = s2io_ethtool_gset,
6661         .set_settings = s2io_ethtool_sset,
6662         .get_drvinfo = s2io_ethtool_gdrvinfo,
6663         .get_regs_len = s2io_ethtool_get_regs_len,
6664         .get_regs = s2io_ethtool_gregs,
6665         .get_link = ethtool_op_get_link,
6666         .get_eeprom_len = s2io_get_eeprom_len,
6667         .get_eeprom = s2io_ethtool_geeprom,
6668         .set_eeprom = s2io_ethtool_seeprom,
6669         .get_ringparam = s2io_ethtool_gringparam,
6670         .get_pauseparam = s2io_ethtool_getpause_data,
6671         .set_pauseparam = s2io_ethtool_setpause_data,
6672         .get_rx_csum = s2io_ethtool_get_rx_csum,
6673         .set_rx_csum = s2io_ethtool_set_rx_csum,
6674         .set_tx_csum = s2io_ethtool_op_set_tx_csum,
6675         .set_sg = ethtool_op_set_sg,
6676         .get_tso = s2io_ethtool_op_get_tso,
6677         .set_tso = s2io_ethtool_op_set_tso,
6678         .set_ufo = ethtool_op_set_ufo,
6679         .self_test = s2io_ethtool_test,
6680         .get_strings = s2io_ethtool_get_strings,
6681         .phys_id = s2io_ethtool_idnic,
6682         .get_ethtool_stats = s2io_get_ethtool_stats,
6683         .get_sset_count = s2io_get_sset_count,
6684 };
6685
6686 /**
6687  *  s2io_ioctl - Entry point for the Ioctl
6688  *  @dev :  Device pointer.
6689  *  @ifr :  An IOCTL specefic structure, that can contain a pointer to
6690  *  a proprietary structure used to pass information to the driver.
6691  *  @cmd :  This is used to distinguish between the different commands that
6692  *  can be passed to the IOCTL functions.
6693  *  Description:
6694  *  Currently there are no special functionality supported in IOCTL, hence
6695  *  function always return EOPNOTSUPPORTED
6696  */
6697
6698 static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
6699 {
6700         return -EOPNOTSUPP;
6701 }
6702
6703 /**
6704  *  s2io_change_mtu - entry point to change MTU size for the device.
6705  *   @dev : device pointer.
6706  *   @new_mtu : the new MTU size for the device.
6707  *   Description: A driver entry point to change MTU size for the device.
6708  *   Before changing the MTU the device must be stopped.
6709  *  Return value:
6710  *   0 on success and an appropriate (-)ve integer as defined in errno.h
6711  *   file on failure.
6712  */
6713
6714 static int s2io_change_mtu(struct net_device *dev, int new_mtu)
6715 {
6716         struct s2io_nic *sp = dev->priv;
6717         int ret = 0;
6718
6719         if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
6720                 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
6721                           dev->name);
6722                 return -EPERM;
6723         }
6724
6725         dev->mtu = new_mtu;
6726         if (netif_running(dev)) {
6727                 s2io_stop_all_tx_queue(sp);
6728                 s2io_card_down(sp);
6729                 ret = s2io_card_up(sp);
6730                 if (ret) {
6731                         DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
6732                                   __FUNCTION__);
6733                         return ret;
6734                 }
6735                 s2io_wake_all_tx_queue(sp);
6736         } else { /* Device is down */
6737                 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6738                 u64 val64 = new_mtu;
6739
6740                 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
6741         }
6742
6743         return ret;
6744 }
6745
6746 /**
6747  * s2io_set_link - Set the LInk status
6748  * @data: long pointer to device private structue
6749  * Description: Sets the link status for the adapter
6750  */
6751
6752 static void s2io_set_link(struct work_struct *work)
6753 {
6754         struct s2io_nic *nic = container_of(work, struct s2io_nic, set_link_task);
6755         struct net_device *dev = nic->dev;
6756         struct XENA_dev_config __iomem *bar0 = nic->bar0;
6757         register u64 val64;
6758         u16 subid;
6759
6760         rtnl_lock();
6761
6762         if (!netif_running(dev))
6763                 goto out_unlock;
6764
6765         if (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(nic->state))) {
6766                 /* The card is being reset, no point doing anything */
6767                 goto out_unlock;
6768         }
6769
6770         subid = nic->pdev->subsystem_device;
6771         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
6772                 /*
6773                  * Allow a small delay for the NICs self initiated
6774                  * cleanup to complete.
6775                  */
6776                 msleep(100);
6777         }
6778
6779         val64 = readq(&bar0->adapter_status);
6780         if (LINK_IS_UP(val64)) {
6781                 if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) {
6782                         if (verify_xena_quiescence(nic)) {
6783                                 val64 = readq(&bar0->adapter_control);
6784                                 val64 |= ADAPTER_CNTL_EN;
6785                                 writeq(val64, &bar0->adapter_control);
6786                                 if (CARDS_WITH_FAULTY_LINK_INDICATORS(
6787                                         nic->device_type, subid)) {
6788                                         val64 = readq(&bar0->gpio_control);
6789                                         val64 |= GPIO_CTRL_GPIO_0;
6790                                         writeq(val64, &bar0->gpio_control);
6791                                         val64 = readq(&bar0->gpio_control);
6792                                 } else {
6793                                         val64 |= ADAPTER_LED_ON;
6794                                         writeq(val64, &bar0->adapter_control);
6795                                 }
6796                                 nic->device_enabled_once = TRUE;
6797                         } else {
6798                                 DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
6799                                 DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
6800                                 s2io_stop_all_tx_queue(nic);
6801                         }
6802                 }
6803                 val64 = readq(&bar0->adapter_control);
6804                 val64 |= ADAPTER_LED_ON;
6805                 writeq(val64, &bar0->adapter_control);
6806                 s2io_link(nic, LINK_UP);
6807         } else {
6808                 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
6809                                                       subid)) {
6810                         val64 = readq(&bar0->gpio_control);
6811                         val64 &= ~GPIO_CTRL_GPIO_0;
6812                         writeq(val64, &bar0->gpio_control);
6813                         val64 = readq(&bar0->gpio_control);
6814                 }
6815                 /* turn off LED */
6816                 val64 = readq(&bar0->adapter_control);
6817                 val64 = val64 &(~ADAPTER_LED_ON);
6818                 writeq(val64, &bar0->adapter_control);
6819                 s2io_link(nic, LINK_DOWN);
6820         }
6821         clear_bit(__S2IO_STATE_LINK_TASK, &(nic->state));
6822
6823 out_unlock:
6824         rtnl_unlock();
6825 }
6826
6827 static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
6828                                 struct buffAdd *ba,
6829                                 struct sk_buff **skb, u64 *temp0, u64 *temp1,
6830                                 u64 *temp2, int size)
6831 {
6832         struct net_device *dev = sp->dev;
6833         struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
6834
6835         if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) {
6836                 struct RxD1 *rxdp1 = (struct RxD1 *)rxdp;
6837                 /* allocate skb */
6838                 if (*skb) {
6839                         DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
6840                         /*
6841                          * As Rx frame are not going to be processed,
6842                          * using same mapped address for the Rxd
6843                          * buffer pointer
6844                          */
6845                         rxdp1->Buffer0_ptr = *temp0;
6846                 } else {
6847                         *skb = dev_alloc_skb(size);
6848                         if (!(*skb)) {
6849                                 DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
6850                                 DBG_PRINT(INFO_DBG, "memory to allocate ");
6851                                 DBG_PRINT(INFO_DBG, "1 buf mode SKBs\n");
6852                                 sp->mac_control.stats_info->sw_stat. \
6853                                         mem_alloc_fail_cnt++;
6854                                 return -ENOMEM ;
6855                         }
6856                         sp->mac_control.stats_info->sw_stat.mem_allocated
6857                                 += (*skb)->truesize;
6858                         /* storing the mapped addr in a temp variable
6859                          * such it will be used for next rxd whose
6860                          * Host Control is NULL
6861                          */
6862                         rxdp1->Buffer0_ptr = *temp0 =
6863                                 pci_map_single( sp->pdev, (*skb)->data,
6864                                         size - NET_IP_ALIGN,
6865                                         PCI_DMA_FROMDEVICE);
6866                         if (pci_dma_mapping_error(sp->pdev, rxdp1->Buffer0_ptr))
6867                                 goto memalloc_failed;
6868                         rxdp->Host_Control = (unsigned long) (*skb);
6869                 }
6870         } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
6871                 struct RxD3 *rxdp3 = (struct RxD3 *)rxdp;
6872                 /* Two buffer Mode */
6873                 if (*skb) {
6874                         rxdp3->Buffer2_ptr = *temp2;
6875                         rxdp3->Buffer0_ptr = *temp0;
6876                         rxdp3->Buffer1_ptr = *temp1;
6877                 } else {
6878                         *skb = dev_alloc_skb(size);
6879                         if (!(*skb)) {
6880                                 DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
6881                                 DBG_PRINT(INFO_DBG, "memory to allocate ");
6882                                 DBG_PRINT(INFO_DBG, "2 buf mode SKBs\n");
6883                                 sp->mac_control.stats_info->sw_stat. \
6884                                         mem_alloc_fail_cnt++;
6885                                 return -ENOMEM;
6886                         }
6887                         sp->mac_control.stats_info->sw_stat.mem_allocated
6888                                 += (*skb)->truesize;
6889                         rxdp3->Buffer2_ptr = *temp2 =
6890                                 pci_map_single(sp->pdev, (*skb)->data,
6891                                                dev->mtu + 4,
6892                                                PCI_DMA_FROMDEVICE);
6893                         if (pci_dma_mapping_error(sp->pdev, rxdp3->Buffer2_ptr))
6894                                 goto memalloc_failed;
6895                         rxdp3->Buffer0_ptr = *temp0 =
6896                                 pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
6897                                                 PCI_DMA_FROMDEVICE);
6898                         if (pci_dma_mapping_error(sp->pdev,
6899                                                 rxdp3->Buffer0_ptr)) {
6900                                 pci_unmap_single (sp->pdev,
6901                                         (dma_addr_t)rxdp3->Buffer2_ptr,
6902                                         dev->mtu + 4, PCI_DMA_FROMDEVICE);
6903                                 goto memalloc_failed;
6904                         }
6905                         rxdp->Host_Control = (unsigned long) (*skb);
6906
6907                         /* Buffer-1 will be dummy buffer not used */
6908                         rxdp3->Buffer1_ptr = *temp1 =
6909                                 pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
6910                                                 PCI_DMA_FROMDEVICE);
6911                         if (pci_dma_mapping_error(sp->pdev,
6912                                                 rxdp3->Buffer1_ptr)) {
6913                                 pci_unmap_single (sp->pdev,
6914                                         (dma_addr_t)rxdp3->Buffer0_ptr,
6915                                         BUF0_LEN, PCI_DMA_FROMDEVICE);
6916                                 pci_unmap_single (sp->pdev,
6917                                         (dma_addr_t)rxdp3->Buffer2_ptr,
6918                                         dev->mtu + 4, PCI_DMA_FROMDEVICE);
6919                                 goto memalloc_failed;
6920                         }
6921                 }
6922         }
6923         return 0;
6924         memalloc_failed:
6925                 stats->pci_map_fail_cnt++;
6926                 stats->mem_freed += (*skb)->truesize;
6927                 dev_kfree_skb(*skb);
6928                 return -ENOMEM;
6929 }
6930
6931 static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
6932                                 int size)
6933 {
6934         struct net_device *dev = sp->dev;
6935         if (sp->rxd_mode == RXD_MODE_1) {
6936                 rxdp->Control_2 = SET_BUFFER0_SIZE_1( size - NET_IP_ALIGN);
6937         } else if (sp->rxd_mode == RXD_MODE_3B) {
6938                 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
6939                 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
6940                 rxdp->Control_2 |= SET_BUFFER2_SIZE_3( dev->mtu + 4);
6941         }
6942 }
6943
6944 static  int rxd_owner_bit_reset(struct s2io_nic *sp)
6945 {
6946         int i, j, k, blk_cnt = 0, size;
6947         struct mac_info * mac_control = &sp->mac_control;
6948         struct config_param *config = &sp->config;
6949         struct net_device *dev = sp->dev;
6950         struct RxD_t *rxdp = NULL;
6951         struct sk_buff *skb = NULL;
6952         struct buffAdd *ba = NULL;
6953         u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
6954
6955         /* Calculate the size based on ring mode */
6956         size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
6957                 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
6958         if (sp->rxd_mode == RXD_MODE_1)
6959                 size += NET_IP_ALIGN;
6960         else if (sp->rxd_mode == RXD_MODE_3B)
6961                 size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
6962
6963         for (i = 0; i < config->rx_ring_num; i++) {
6964                 blk_cnt = config->rx_cfg[i].num_rxd /
6965                         (rxd_count[sp->rxd_mode] +1);
6966
6967                 for (j = 0; j < blk_cnt; j++) {
6968                         for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
6969                                 rxdp = mac_control->rings[i].
6970                                         rx_blocks[j].rxds[k].virt_addr;
6971                                 if(sp->rxd_mode == RXD_MODE_3B)
6972                                         ba = &mac_control->rings[i].ba[j][k];
6973                                 if (set_rxd_buffer_pointer(sp, rxdp, ba,
6974                                                        &skb,(u64 *)&temp0_64,
6975                                                        (u64 *)&temp1_64,
6976                                                        (u64 *)&temp2_64,
6977                                                         size) == -ENOMEM) {
6978                                         return 0;
6979                                 }
6980
6981                                 set_rxd_buffer_size(sp, rxdp, size);
6982                                 wmb();
6983                                 /* flip the Ownership bit to Hardware */
6984                                 rxdp->Control_1 |= RXD_OWN_XENA;
6985                         }
6986                 }
6987         }
6988         return 0;
6989
6990 }
6991
6992 static int s2io_add_isr(struct s2io_nic * sp)
6993 {
6994         int ret = 0;
6995         struct net_device *dev = sp->dev;
6996         int err = 0;
6997
6998         if (sp->config.intr_type == MSI_X)
6999                 ret = s2io_enable_msi_x(sp);
7000         if (ret) {
7001                 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
7002                 sp->config.intr_type = INTA;
7003         }
7004
7005         /* Store the values of the MSIX table in the struct s2io_nic structure */
7006         store_xmsi_data(sp);
7007
7008         /* After proper initialization of H/W, register ISR */
7009         if (sp->config.intr_type == MSI_X) {
7010                 int i, msix_rx_cnt = 0;
7011
7012                 for (i = 0; i < sp->num_entries; i++) {
7013                         if (sp->s2io_entries[i].in_use == MSIX_FLG) {
7014                                 if (sp->s2io_entries[i].type ==
7015                                         MSIX_RING_TYPE) {
7016                                         sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
7017                                                 dev->name, i);
7018                                         err = request_irq(sp->entries[i].vector,
7019                                                 s2io_msix_ring_handle, 0,
7020                                                 sp->desc[i],
7021                                                 sp->s2io_entries[i].arg);
7022                                 } else if (sp->s2io_entries[i].type ==
7023                                         MSIX_ALARM_TYPE) {
7024                                         sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
7025                                         dev->name, i);
7026                                         err = request_irq(sp->entries[i].vector,
7027                                                 s2io_msix_fifo_handle, 0,
7028                                                 sp->desc[i],
7029                                                 sp->s2io_entries[i].arg);
7030
7031                                 }
7032                                 /* if either data or addr is zero print it. */
7033                                 if (!(sp->msix_info[i].addr &&
7034                                         sp->msix_info[i].data)) {
7035                                         DBG_PRINT(ERR_DBG,
7036                                                 "%s @Addr:0x%llx Data:0x%llx\n",
7037                                                 sp->desc[i],
7038                                                 (unsigned long long)
7039                                                 sp->msix_info[i].addr,
7040                                                 (unsigned long long)
7041                                                 ntohl(sp->msix_info[i].data));
7042                                 } else
7043                                         msix_rx_cnt++;
7044                                 if (err) {
7045                                         remove_msix_isr(sp);
7046
7047                                         DBG_PRINT(ERR_DBG,
7048                                                 "%s:MSI-X-%d registration "
7049                                                 "failed\n", dev->name, i);
7050
7051                                         DBG_PRINT(ERR_DBG,
7052                                                 "%s: Defaulting to INTA\n",
7053                                                 dev->name);
7054                                         sp->config.intr_type = INTA;
7055                                         break;
7056                                 }
7057                                 sp->s2io_entries[i].in_use =
7058                                         MSIX_REGISTERED_SUCCESS;
7059                         }
7060                 }
7061                 if (!err) {
7062                         printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
7063                                 --msix_rx_cnt);
7064                         DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled"
7065                                                 " through alarm vector\n");
7066                 }
7067         }
7068         if (sp->config.intr_type == INTA) {
7069                 err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
7070                                 sp->name, dev);
7071                 if (err) {
7072                         DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
7073                                   dev->name);
7074                         return -1;
7075                 }
7076         }
7077         return 0;
7078 }
7079 static void s2io_rem_isr(struct s2io_nic * sp)
7080 {
7081         if (sp->config.intr_type == MSI_X)
7082                 remove_msix_isr(sp);
7083         else
7084                 remove_inta_isr(sp);
7085 }
7086
7087 static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
7088 {
7089         int cnt = 0;
7090         struct XENA_dev_config __iomem *bar0 = sp->bar0;
7091         register u64 val64 = 0;
7092         struct config_param *config;
7093         config = &sp->config;
7094
7095         if (!is_s2io_card_up(sp))
7096                 return;
7097
7098         del_timer_sync(&sp->alarm_timer);
7099         /* If s2io_set_link task is executing, wait till it completes. */
7100         while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state))) {
7101                 msleep(50);
7102         }
7103         clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
7104
7105         /* Disable napi */
7106         if (sp->config.napi) {
7107                 int off = 0;
7108                 if (config->intr_type ==  MSI_X) {
7109                         for (; off < sp->config.rx_ring_num; off++)
7110                                 napi_disable(&sp->mac_control.rings[off].napi);
7111                         }
7112                 else
7113                         napi_disable(&sp->napi);
7114         }
7115
7116         /* disable Tx and Rx traffic on the NIC */
7117         if (do_io)
7118                 stop_nic(sp);
7119
7120         s2io_rem_isr(sp);
7121
7122         /* stop the tx queue, indicate link down */
7123         s2io_link(sp, LINK_DOWN);
7124
7125         /* Check if the device is Quiescent and then Reset the NIC */
7126         while(do_io) {
7127                 /* As per the HW requirement we need to replenish the
7128                  * receive buffer to avoid the ring bump. Since there is
7129                  * no intention of processing the Rx frame at this pointwe are
7130                  * just settting the ownership bit of rxd in Each Rx
7131                  * ring to HW and set the appropriate buffer size
7132                  * based on the ring mode
7133                  */
7134                 rxd_owner_bit_reset(sp);
7135
7136                 val64 = readq(&bar0->adapter_status);
7137                 if (verify_xena_quiescence(sp)) {
7138                         if(verify_pcc_quiescent(sp, sp->device_enabled_once))
7139                         break;
7140                 }
7141
7142                 msleep(50);
7143                 cnt++;
7144                 if (cnt == 10) {
7145                         DBG_PRINT(ERR_DBG,
7146                                   "s2io_close:Device not Quiescent ");
7147                         DBG_PRINT(ERR_DBG, "adaper status reads 0x%llx\n",
7148                                   (unsigned long long) val64);
7149                         break;
7150                 }
7151         }
7152         if (do_io)
7153                 s2io_reset(sp);
7154
7155         /* Free all Tx buffers */
7156         free_tx_buffers(sp);
7157
7158         /* Free all Rx buffers */
7159         free_rx_buffers(sp);
7160
7161         clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
7162 }
7163
7164 static void s2io_card_down(struct s2io_nic * sp)
7165 {
7166         do_s2io_card_down(sp, 1);
7167 }
7168
7169 static int s2io_card_up(struct s2io_nic * sp)
7170 {
7171         int i, ret = 0;
7172         struct mac_info *mac_control;
7173         struct config_param *config;
7174         struct net_device *dev = (struct net_device *) sp->dev;
7175         u16 interruptible;
7176
7177         /* Initialize the H/W I/O registers */
7178         ret = init_nic(sp);
7179         if (ret != 0) {
7180                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
7181                           dev->name);
7182                 if (ret != -EIO)
7183                         s2io_reset(sp);
7184                 return ret;
7185         }
7186
7187         /*
7188          * Initializing the Rx buffers. For now we are considering only 1
7189          * Rx ring and initializing buffers into 30 Rx blocks
7190          */
7191         mac_control = &sp->mac_control;
7192         config = &sp->config;
7193
7194         for (i = 0; i < config->rx_ring_num; i++) {
7195                 mac_control->rings[i].mtu = dev->mtu;
7196                 ret = fill_rx_buffers(sp, &mac_control->rings[i], 1);
7197                 if (ret) {
7198                         DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
7199                                   dev->name);
7200                         s2io_reset(sp);
7201                         free_rx_buffers(sp);
7202                         return -ENOMEM;
7203                 }
7204                 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
7205                           mac_control->rings[i].rx_bufs_left);
7206         }
7207
7208         /* Initialise napi */
7209         if (config->napi) {
7210                 int i;
7211                 if (config->intr_type ==  MSI_X) {
7212                         for (i = 0; i < sp->config.rx_ring_num; i++)
7213                                 napi_enable(&sp->mac_control.rings[i].napi);
7214                 } else {
7215                         napi_enable(&sp->napi);
7216                 }
7217         }
7218
7219         /* Maintain the state prior to the open */
7220         if (sp->promisc_flg)
7221                 sp->promisc_flg = 0;
7222         if (sp->m_cast_flg) {
7223                 sp->m_cast_flg = 0;
7224                 sp->all_multi_pos= 0;
7225         }
7226
7227         /* Setting its receive mode */
7228         s2io_set_multicast(dev);
7229
7230         if (sp->lro) {
7231                 /* Initialize max aggregatable pkts per session based on MTU */
7232                 sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
7233                 /* Check if we can use(if specified) user provided value */
7234                 if (lro_max_pkts < sp->lro_max_aggr_per_sess)
7235                         sp->lro_max_aggr_per_sess = lro_max_pkts;
7236         }
7237
7238         /* Enable Rx Traffic and interrupts on the NIC */
7239         if (start_nic(sp)) {
7240                 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
7241                 s2io_reset(sp);
7242                 free_rx_buffers(sp);
7243                 return -ENODEV;
7244         }
7245
7246         /* Add interrupt service routine */
7247         if (s2io_add_isr(sp) != 0) {
7248                 if (sp->config.intr_type == MSI_X)
7249                         s2io_rem_isr(sp);
7250                 s2io_reset(sp);
7251                 free_rx_buffers(sp);
7252                 return -ENODEV;
7253         }
7254
7255         S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
7256
7257         set_bit(__S2IO_STATE_CARD_UP, &sp->state);
7258
7259         /*  Enable select interrupts */
7260         en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
7261         if (sp->config.intr_type != INTA) {
7262                 interruptible = TX_TRAFFIC_INTR | TX_PIC_INTR;
7263                 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
7264         } else {
7265                 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
7266                 interruptible |= TX_PIC_INTR;
7267                 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
7268         }
7269
7270         return 0;
7271 }
7272
7273 /**
7274  * s2io_restart_nic - Resets the NIC.
7275  * @data : long pointer to the device private structure
7276  * Description:
7277  * This function is scheduled to be run by the s2io_tx_watchdog
7278  * function after 0.5 secs to reset the NIC. The idea is to reduce
7279  * the run time of the watch dog routine which is run holding a
7280  * spin lock.
7281  */
7282
7283 static void s2io_restart_nic(struct work_struct *work)
7284 {
7285         struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task);
7286         struct net_device *dev = sp->dev;
7287
7288         rtnl_lock();
7289
7290         if (!netif_running(dev))
7291                 goto out_unlock;
7292
7293         s2io_card_down(sp);
7294         if (s2io_card_up(sp)) {
7295                 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
7296                           dev->name);
7297         }
7298         s2io_wake_all_tx_queue(sp);
7299         DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
7300                   dev->name);
7301 out_unlock:
7302         rtnl_unlock();
7303 }
7304
7305 /**
7306  *  s2io_tx_watchdog - Watchdog for transmit side.
7307  *  @dev : Pointer to net device structure
7308  *  Description:
7309  *  This function is triggered if the Tx Queue is stopped
7310  *  for a pre-defined amount of time when the Interface is still up.
7311  *  If the Interface is jammed in such a situation, the hardware is
7312  *  reset (by s2io_close) and restarted again (by s2io_open) to
7313  *  overcome any problem that might have been caused in the hardware.
7314  *  Return value:
7315  *  void
7316  */
7317
7318 static void s2io_tx_watchdog(struct net_device *dev)
7319 {
7320         struct s2io_nic *sp = dev->priv;
7321
7322         if (netif_carrier_ok(dev)) {
7323                 sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt++;
7324                 schedule_work(&sp->rst_timer_task);
7325                 sp->mac_control.stats_info->sw_stat.soft_reset_cnt++;
7326         }
7327 }
7328
7329 /**
7330  *   rx_osm_handler - To perform some OS related operations on SKB.
7331  *   @sp: private member of the device structure,pointer to s2io_nic structure.
7332  *   @skb : the socket buffer pointer.
7333  *   @len : length of the packet
7334  *   @cksum : FCS checksum of the frame.
7335  *   @ring_no : the ring from which this RxD was extracted.
7336  *   Description:
7337  *   This function is called by the Rx interrupt serivce routine to perform
7338  *   some OS related operations on the SKB before passing it to the upper
7339  *   layers. It mainly checks if the checksum is OK, if so adds it to the
7340  *   SKBs cksum variable, increments the Rx packet count and passes the SKB
7341  *   to the upper layer. If the checksum is wrong, it increments the Rx
7342  *   packet error count, frees the SKB and returns error.
7343  *   Return value:
7344  *   SUCCESS on success and -1 on failure.
7345  */
7346 static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
7347 {
7348         struct s2io_nic *sp = ring_data->nic;
7349         struct net_device *dev = (struct net_device *) ring_data->dev;
7350         struct sk_buff *skb = (struct sk_buff *)
7351                 ((unsigned long) rxdp->Host_Control);
7352         int ring_no = ring_data->ring_no;
7353         u16 l3_csum, l4_csum;
7354         unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
7355         struct lro *lro;
7356         u8 err_mask;
7357
7358         skb->dev = dev;
7359
7360         if (err) {
7361                 /* Check for parity error */
7362                 if (err & 0x1) {
7363                         sp->mac_control.stats_info->sw_stat.parity_err_cnt++;
7364                 }
7365                 err_mask = err >> 48;
7366                 switch(err_mask) {
7367                         case 1:
7368                                 sp->mac_control.stats_info->sw_stat.
7369                                 rx_parity_err_cnt++;
7370                         break;
7371
7372                         case 2:
7373                                 sp->mac_control.stats_info->sw_stat.
7374                                 rx_abort_cnt++;
7375                         break;
7376
7377                         case 3:
7378                                 sp->mac_control.stats_info->sw_stat.
7379                                 rx_parity_abort_cnt++;
7380                         break;
7381
7382                         case 4:
7383                                 sp->mac_control.stats_info->sw_stat.
7384                                 rx_rda_fail_cnt++;
7385                         break;
7386
7387                         case 5:
7388                                 sp->mac_control.stats_info->sw_stat.
7389                                 rx_unkn_prot_cnt++;
7390                         break;
7391
7392                         case 6:
7393                                 sp->mac_control.stats_info->sw_stat.
7394                                 rx_fcs_err_cnt++;
7395                         break;
7396
7397                         case 7:
7398                                 sp->mac_control.stats_info->sw_stat.
7399                                 rx_buf_size_err_cnt++;
7400                         break;
7401
7402                         case 8:
7403                                 sp->mac_control.stats_info->sw_stat.
7404                                 rx_rxd_corrupt_cnt++;
7405                         break;
7406
7407                         case 15:
7408                                 sp->mac_control.stats_info->sw_stat.
7409                                 rx_unkn_err_cnt++;
7410                         break;
7411                 }
7412                 /*
7413                 * Drop the packet if bad transfer code. Exception being
7414                 * 0x5, which could be due to unsupported IPv6 extension header.
7415                 * In this case, we let stack handle the packet.
7416                 * Note that in this case, since checksum will be incorrect,
7417                 * stack will validate the same.
7418                 */
7419                 if (err_mask != 0x5) {
7420                         DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
7421                                 dev->name, err_mask);
7422                         sp->stats.rx_crc_errors++;
7423                         sp->mac_control.stats_info->sw_stat.mem_freed
7424                                 += skb->truesize;
7425                         dev_kfree_skb(skb);
7426                         ring_data->rx_bufs_left -= 1;
7427                         rxdp->Host_Control = 0;
7428                         return 0;
7429                 }
7430         }
7431
7432         /* Updating statistics */
7433         ring_data->rx_packets++;
7434         rxdp->Host_Control = 0;
7435         if (sp->rxd_mode == RXD_MODE_1) {
7436                 int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
7437
7438                 ring_data->rx_bytes += len;
7439                 skb_put(skb, len);
7440
7441         } else if (sp->rxd_mode == RXD_MODE_3B) {
7442                 int get_block = ring_data->rx_curr_get_info.block_index;
7443                 int get_off = ring_data->rx_curr_get_info.offset;
7444                 int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2);
7445                 int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
7446                 unsigned char *buff = skb_push(skb, buf0_len);
7447
7448                 struct buffAdd *ba = &ring_data->ba[get_block][get_off];
7449                 ring_data->rx_bytes += buf0_len + buf2_len;
7450                 memcpy(buff, ba->ba_0, buf0_len);
7451                 skb_put(skb, buf2_len);
7452         }
7453
7454         if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && ((!ring_data->lro) ||
7455             (ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
7456             (sp->rx_csum)) {
7457                 l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
7458                 l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
7459                 if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
7460                         /*
7461                          * NIC verifies if the Checksum of the received
7462                          * frame is Ok or not and accordingly returns
7463                          * a flag in the RxD.
7464                          */
7465                         skb->ip_summed = CHECKSUM_UNNECESSARY;
7466                         if (ring_data->lro) {
7467                                 u32 tcp_len;
7468                                 u8 *tcp;
7469                                 int ret = 0;
7470
7471                                 ret = s2io_club_tcp_session(ring_data,
7472                                         skb->data, &tcp, &tcp_len, &lro,
7473                                         rxdp, sp);
7474                                 switch (ret) {
7475                                         case 3: /* Begin anew */
7476                                                 lro->parent = skb;
7477                                                 goto aggregate;
7478                                         case 1: /* Aggregate */
7479                                         {
7480                                                 lro_append_pkt(sp, lro,
7481                                                         skb, tcp_len);
7482                                                 goto aggregate;
7483                                         }
7484                                         case 4: /* Flush session */
7485                                         {
7486                                                 lro_append_pkt(sp, lro,
7487                                                         skb, tcp_len);
7488                                                 queue_rx_frame(lro->parent,
7489                                                         lro->vlan_tag);
7490                                                 clear_lro_session(lro);
7491                                                 sp->mac_control.stats_info->
7492                                                     sw_stat.flush_max_pkts++;
7493                                                 goto aggregate;
7494                                         }
7495                                         case 2: /* Flush both */
7496                                                 lro->parent->data_len =
7497                                                         lro->frags_len;
7498                                                 sp->mac_control.stats_info->
7499                                                      sw_stat.sending_both++;
7500                                                 queue_rx_frame(lro->parent,
7501                                                         lro->vlan_tag);
7502                                                 clear_lro_session(lro);
7503                                                 goto send_up;
7504                                         case 0: /* sessions exceeded */
7505                                         case -1: /* non-TCP or not
7506                                                   * L2 aggregatable
7507                                                   */
7508                                         case 5: /*
7509                                                  * First pkt in session not
7510                                                  * L3/L4 aggregatable
7511                                                  */
7512                                                 break;
7513                                         default:
7514                                                 DBG_PRINT(ERR_DBG,
7515                                                         "%s: Samadhana!!\n",
7516                                                          __FUNCTION__);
7517                                                 BUG();
7518                                 }
7519                         }
7520                 } else {
7521                         /*
7522                          * Packet with erroneous checksum, let the
7523                          * upper layers deal with it.
7524                          */
7525                         skb->ip_summed = CHECKSUM_NONE;
7526                 }
7527         } else
7528                 skb->ip_summed = CHECKSUM_NONE;
7529
7530         sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
7531 send_up:
7532         queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
7533         dev->last_rx = jiffies;
7534 aggregate:
7535         sp->mac_control.rings[ring_no].rx_bufs_left -= 1;
7536         return SUCCESS;
7537 }
7538
7539 /**
7540  *  s2io_link - stops/starts the Tx queue.
7541  *  @sp : private member of the device structure, which is a pointer to the
7542  *  s2io_nic structure.
7543  *  @link : inidicates whether link is UP/DOWN.
7544  *  Description:
7545  *  This function stops/starts the Tx queue depending on whether the link
7546  *  status of the NIC is is down or up. This is called by the Alarm
7547  *  interrupt handler whenever a link change interrupt comes up.
7548  *  Return value:
7549  *  void.
7550  */
7551
7552 static void s2io_link(struct s2io_nic * sp, int link)
7553 {
7554         struct net_device *dev = (struct net_device *) sp->dev;
7555
7556         if (link != sp->last_link_state) {
7557                 init_tti(sp, link);
7558                 if (link == LINK_DOWN) {
7559                         DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
7560                         s2io_stop_all_tx_queue(sp);
7561                         netif_carrier_off(dev);
7562                         if(sp->mac_control.stats_info->sw_stat.link_up_cnt)
7563                         sp->mac_control.stats_info->sw_stat.link_up_time =
7564                                 jiffies - sp->start_time;
7565                         sp->mac_control.stats_info->sw_stat.link_down_cnt++;
7566                 } else {
7567                         DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
7568                         if (sp->mac_control.stats_info->sw_stat.link_down_cnt)
7569                         sp->mac_control.stats_info->sw_stat.link_down_time =
7570                                 jiffies - sp->start_time;
7571                         sp->mac_control.stats_info->sw_stat.link_up_cnt++;
7572                         netif_carrier_on(dev);
7573                         s2io_wake_all_tx_queue(sp);
7574                 }
7575         }
7576         sp->last_link_state = link;
7577         sp->start_time = jiffies;
7578 }
7579
7580 /**
7581  *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
7582  *  @sp : private member of the device structure, which is a pointer to the
7583  *  s2io_nic structure.
7584  *  Description:
7585  *  This function initializes a few of the PCI and PCI-X configuration registers
7586  *  with recommended values.
7587  *  Return value:
7588  *  void
7589  */
7590
7591 static void s2io_init_pci(struct s2io_nic * sp)
7592 {
7593         u16 pci_cmd = 0, pcix_cmd = 0;
7594
7595         /* Enable Data Parity Error Recovery in PCI-X command register. */
7596         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7597                              &(pcix_cmd));
7598         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7599                               (pcix_cmd | 1));
7600         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7601                              &(pcix_cmd));
7602
7603         /* Set the PErr Response bit in PCI command register. */
7604         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7605         pci_write_config_word(sp->pdev, PCI_COMMAND,
7606                               (pci_cmd | PCI_COMMAND_PARITY));
7607         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7608 }
7609
7610 static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
7611         u8 *dev_multiq)
7612 {
7613         if ((tx_fifo_num > MAX_TX_FIFOS) ||
7614                 (tx_fifo_num < 1)) {
7615                 DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos "
7616                         "(%d) not supported\n", tx_fifo_num);
7617
7618                 if (tx_fifo_num < 1)
7619                         tx_fifo_num = 1;
7620                 else
7621                         tx_fifo_num = MAX_TX_FIFOS;
7622
7623                 DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num);
7624                 DBG_PRINT(ERR_DBG, "tx fifos\n");
7625         }
7626
7627         if (multiq)
7628                 *dev_multiq = multiq;
7629
7630         if (tx_steering_type && (1 == tx_fifo_num)) {
7631                 if (tx_steering_type != TX_DEFAULT_STEERING)
7632                         DBG_PRINT(ERR_DBG,
7633                                 "s2io: Tx steering is not supported with "
7634                                 "one fifo. Disabling Tx steering.\n");
7635                 tx_steering_type = NO_STEERING;
7636         }
7637
7638         if ((tx_steering_type < NO_STEERING) ||
7639                 (tx_steering_type > TX_DEFAULT_STEERING)) {
7640                 DBG_PRINT(ERR_DBG, "s2io: Requested transmit steering not "
7641                          "supported\n");
7642                 DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n");
7643                 tx_steering_type = NO_STEERING;
7644         }
7645
7646         if (rx_ring_num > MAX_RX_RINGS) {
7647                 DBG_PRINT(ERR_DBG, "s2io: Requested number of rx rings not "
7648                          "supported\n");
7649                 DBG_PRINT(ERR_DBG, "s2io: Default to %d rx rings\n",
7650                         MAX_RX_RINGS);
7651                 rx_ring_num = MAX_RX_RINGS;
7652         }
7653
7654         if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
7655                 DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
7656                           "Defaulting to INTA\n");
7657                 *dev_intr_type = INTA;
7658         }
7659
7660         if ((*dev_intr_type == MSI_X) &&
7661                         ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
7662                         (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
7663                 DBG_PRINT(ERR_DBG, "s2io: Xframe I does not support MSI_X. "
7664                                         "Defaulting to INTA\n");
7665                 *dev_intr_type = INTA;
7666         }
7667
7668         if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) {
7669                 DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n");
7670                 DBG_PRINT(ERR_DBG, "s2io: Defaulting to 1-buffer mode\n");
7671                 rx_ring_mode = 1;
7672         }
7673         return SUCCESS;
7674 }
7675
7676 /**
7677  * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
7678  * or Traffic class respectively.
7679  * @nic: device private variable
7680  * Description: The function configures the receive steering to
7681  * desired receive ring.
7682  * Return Value:  SUCCESS on success and
7683  * '-1' on failure (endian settings incorrect).
7684  */
7685 static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring)
7686 {
7687         struct XENA_dev_config __iomem *bar0 = nic->bar0;
7688         register u64 val64 = 0;
7689
7690         if (ds_codepoint > 63)
7691                 return FAILURE;
7692
7693         val64 = RTS_DS_MEM_DATA(ring);
7694         writeq(val64, &bar0->rts_ds_mem_data);
7695
7696         val64 = RTS_DS_MEM_CTRL_WE |
7697                 RTS_DS_MEM_CTRL_STROBE_NEW_CMD |
7698                 RTS_DS_MEM_CTRL_OFFSET(ds_codepoint);
7699
7700         writeq(val64, &bar0->rts_ds_mem_ctrl);
7701
7702         return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl,
7703                                 RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
7704                                 S2IO_BIT_RESET);
7705 }
7706
7707 /**
7708  *  s2io_init_nic - Initialization of the adapter .
7709  *  @pdev : structure containing the PCI related information of the device.
7710  *  @pre: List of PCI devices supported by the driver listed in s2io_tbl.
7711  *  Description:
7712  *  The function initializes an adapter identified by the pci_dec structure.
7713  *  All OS related initialization including memory and device structure and
7714  *  initlaization of the device private variable is done. Also the swapper
7715  *  control register is initialized to enable read and write into the I/O
7716  *  registers of the device.
7717  *  Return value:
7718  *  returns 0 on success and negative on failure.
7719  */
7720
7721 static int __devinit
7722 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
7723 {
7724         struct s2io_nic *sp;
7725         struct net_device *dev;
7726         int i, j, ret;
7727         int dma_flag = FALSE;
7728         u32 mac_up, mac_down;
7729         u64 val64 = 0, tmp64 = 0;
7730         struct XENA_dev_config __iomem *bar0 = NULL;
7731         u16 subid;
7732         struct mac_info *mac_control;
7733         struct config_param *config;
7734         int mode;
7735         u8 dev_intr_type = intr_type;
7736         u8 dev_multiq = 0;
7737         DECLARE_MAC_BUF(mac);
7738
7739         ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq);
7740         if (ret)
7741                 return ret;
7742
7743         if ((ret = pci_enable_device(pdev))) {
7744                 DBG_PRINT(ERR_DBG,
7745                           "s2io_init_nic: pci_enable_device failed\n");
7746                 return ret;
7747         }
7748
7749         if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
7750                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
7751                 dma_flag = TRUE;
7752                 if (pci_set_consistent_dma_mask
7753                     (pdev, DMA_64BIT_MASK)) {
7754                         DBG_PRINT(ERR_DBG,
7755                                   "Unable to obtain 64bit DMA for \
7756                                         consistent allocations\n");
7757                         pci_disable_device(pdev);
7758                         return -ENOMEM;
7759                 }
7760         } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
7761                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
7762         } else {
7763                 pci_disable_device(pdev);
7764                 return -ENOMEM;
7765         }
7766         if ((ret = pci_request_regions(pdev, s2io_driver_name))) {
7767                 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x \n", __FUNCTION__, ret);
7768                 pci_disable_device(pdev);
7769                 return -ENODEV;
7770         }
7771         if (dev_multiq)
7772                 dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
7773         else
7774                 dev = alloc_etherdev(sizeof(struct s2io_nic));
7775         if (dev == NULL) {
7776                 DBG_PRINT(ERR_DBG, "Device allocation failed\n");
7777                 pci_disable_device(pdev);
7778                 pci_release_regions(pdev);
7779                 return -ENODEV;
7780         }
7781
7782         pci_set_master(pdev);
7783         pci_set_drvdata(pdev, dev);
7784         SET_NETDEV_DEV(dev, &pdev->dev);
7785
7786         /*  Private member variable initialized to s2io NIC structure */
7787         sp = dev->priv;
7788         memset(sp, 0, sizeof(struct s2io_nic));
7789         sp->dev = dev;
7790         sp->pdev = pdev;
7791         sp->high_dma_flag = dma_flag;
7792         sp->device_enabled_once = FALSE;
7793         if (rx_ring_mode == 1)
7794                 sp->rxd_mode = RXD_MODE_1;
7795         if (rx_ring_mode == 2)
7796                 sp->rxd_mode = RXD_MODE_3B;
7797
7798         sp->config.intr_type = dev_intr_type;
7799
7800         if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
7801                 (pdev->device == PCI_DEVICE_ID_HERC_UNI))
7802                 sp->device_type = XFRAME_II_DEVICE;
7803         else
7804                 sp->device_type = XFRAME_I_DEVICE;
7805
7806         sp->lro = lro_enable;
7807
7808         /* Initialize some PCI/PCI-X fields of the NIC. */
7809         s2io_init_pci(sp);
7810
7811         /*
7812          * Setting the device configuration parameters.
7813          * Most of these parameters can be specified by the user during
7814          * module insertion as they are module loadable parameters. If
7815          * these parameters are not not specified during load time, they
7816          * are initialized with default values.
7817          */
7818         mac_control = &sp->mac_control;
7819         config = &sp->config;
7820
7821         config->napi = napi;
7822         config->tx_steering_type = tx_steering_type;
7823
7824         /* Tx side parameters. */
7825         if (config->tx_steering_type == TX_PRIORITY_STEERING)
7826                 config->tx_fifo_num = MAX_TX_FIFOS;
7827         else
7828                 config->tx_fifo_num = tx_fifo_num;
7829
7830         /* Initialize the fifos used for tx steering */
7831         if (config->tx_fifo_num < 5) {
7832                         if (config->tx_fifo_num  == 1)
7833                                 sp->total_tcp_fifos = 1;
7834                         else
7835                                 sp->total_tcp_fifos = config->tx_fifo_num - 1;
7836                         sp->udp_fifo_idx = config->tx_fifo_num - 1;
7837                         sp->total_udp_fifos = 1;
7838                         sp->other_fifo_idx = sp->total_tcp_fifos - 1;
7839         } else {
7840                 sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
7841                                                 FIFO_OTHER_MAX_NUM);
7842                 sp->udp_fifo_idx = sp->total_tcp_fifos;
7843                 sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
7844                 sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
7845         }
7846
7847         config->multiq = dev_multiq;
7848         for (i = 0; i < config->tx_fifo_num; i++) {
7849                 config->tx_cfg[i].fifo_len = tx_fifo_len[i];
7850                 config->tx_cfg[i].fifo_priority = i;
7851         }
7852
7853         /* mapping the QoS priority to the configured fifos */
7854         for (i = 0; i < MAX_TX_FIFOS; i++)
7855                 config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i];
7856
7857         /* map the hashing selector table to the configured fifos */
7858         for (i = 0; i < config->tx_fifo_num; i++)
7859                 sp->fifo_selector[i] = fifo_selector[i];
7860
7861
7862         config->tx_intr_type = TXD_INT_TYPE_UTILZ;
7863         for (i = 0; i < config->tx_fifo_num; i++) {
7864                 config->tx_cfg[i].f_no_snoop =
7865                     (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
7866                 if (config->tx_cfg[i].fifo_len < 65) {
7867                         config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
7868                         break;
7869                 }
7870         }
7871         /* + 2 because one Txd for skb->data and one Txd for UFO */
7872         config->max_txds = MAX_SKB_FRAGS + 2;
7873
7874         /* Rx side parameters. */
7875         config->rx_ring_num = rx_ring_num;
7876         for (i = 0; i < config->rx_ring_num; i++) {
7877                 config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
7878                     (rxd_count[sp->rxd_mode] + 1);
7879                 config->rx_cfg[i].ring_priority = i;
7880                 mac_control->rings[i].rx_bufs_left = 0;
7881                 mac_control->rings[i].rxd_mode = sp->rxd_mode;
7882                 mac_control->rings[i].rxd_count = rxd_count[sp->rxd_mode];
7883                 mac_control->rings[i].pdev = sp->pdev;
7884                 mac_control->rings[i].dev = sp->dev;
7885         }
7886
7887         for (i = 0; i < rx_ring_num; i++) {
7888                 config->rx_cfg[i].ring_org = RING_ORG_BUFF1;
7889                 config->rx_cfg[i].f_no_snoop =
7890                     (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
7891         }
7892
7893         /*  Setting Mac Control parameters */
7894         mac_control->rmac_pause_time = rmac_pause_time;
7895         mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
7896         mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
7897
7898
7899         /*  initialize the shared memory used by the NIC and the host */
7900         if (init_shared_mem(sp)) {
7901                 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
7902                           dev->name);
7903                 ret = -ENOMEM;
7904                 goto mem_alloc_failed;
7905         }
7906
7907         sp->bar0 = ioremap(pci_resource_start(pdev, 0),
7908                                      pci_resource_len(pdev, 0));
7909         if (!sp->bar0) {
7910                 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
7911                           dev->name);
7912                 ret = -ENOMEM;
7913                 goto bar0_remap_failed;
7914         }
7915
7916         sp->bar1 = ioremap(pci_resource_start(pdev, 2),
7917                                      pci_resource_len(pdev, 2));
7918         if (!sp->bar1) {
7919                 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
7920                           dev->name);
7921                 ret = -ENOMEM;
7922                 goto bar1_remap_failed;
7923         }
7924
7925         dev->irq = pdev->irq;
7926         dev->base_addr = (unsigned long) sp->bar0;
7927
7928         /* Initializing the BAR1 address as the start of the FIFO pointer. */
7929         for (j = 0; j < MAX_TX_FIFOS; j++) {
7930                 mac_control->tx_FIFO_start[j] = (struct TxFIFO_element __iomem *)
7931                     (sp->bar1 + (j * 0x00020000));
7932         }
7933
7934         /*  Driver entry points */
7935         dev->open = &s2io_open;
7936         dev->stop = &s2io_close;
7937         dev->hard_start_xmit = &s2io_xmit;
7938         dev->get_stats = &s2io_get_stats;
7939         dev->set_multicast_list = &s2io_set_multicast;
7940         dev->do_ioctl = &s2io_ioctl;
7941         dev->set_mac_address = &s2io_set_mac_addr;
7942         dev->change_mtu = &s2io_change_mtu;
7943         SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
7944         dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
7945         dev->vlan_rx_register = s2io_vlan_rx_register;
7946         dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
7947
7948         /*
7949          * will use eth_mac_addr() for  dev->set_mac_address
7950          * mac address will be set every time dev->open() is called
7951          */
7952 #ifdef CONFIG_NET_POLL_CONTROLLER
7953         dev->poll_controller = s2io_netpoll;
7954 #endif
7955
7956         dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
7957         if (sp->high_dma_flag == TRUE)
7958                 dev->features |= NETIF_F_HIGHDMA;
7959         dev->features |= NETIF_F_TSO;
7960         dev->features |= NETIF_F_TSO6;
7961         if ((sp->device_type & XFRAME_II_DEVICE) && (ufo))  {
7962                 dev->features |= NETIF_F_UFO;
7963                 dev->features |= NETIF_F_HW_CSUM;
7964         }
7965         dev->tx_timeout = &s2io_tx_watchdog;
7966         dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
7967         INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
7968         INIT_WORK(&sp->set_link_task, s2io_set_link);
7969
7970         pci_save_state(sp->pdev);
7971
7972         /* Setting swapper control on the NIC, for proper reset operation */
7973         if (s2io_set_swapper(sp)) {
7974                 DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
7975                           dev->name);
7976                 ret = -EAGAIN;
7977                 goto set_swap_failed;
7978         }
7979
7980         /* Verify if the Herc works on the slot its placed into */
7981         if (sp->device_type & XFRAME_II_DEVICE) {
7982                 mode = s2io_verify_pci_mode(sp);
7983                 if (mode < 0) {
7984                         DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__);
7985                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
7986                         ret = -EBADSLT;
7987                         goto set_swap_failed;
7988                 }
7989         }
7990
7991         if (sp->config.intr_type == MSI_X) {
7992                 sp->num_entries = config->rx_ring_num + 1;
7993                 ret = s2io_enable_msi_x(sp);
7994
7995                 if (!ret) {
7996                         ret = s2io_test_msi(sp);
7997                         /* rollback MSI-X, will re-enable during add_isr() */
7998                         remove_msix_isr(sp);
7999                 }
8000                 if (ret) {
8001
8002                         DBG_PRINT(ERR_DBG,
8003                           "%s: MSI-X requested but failed to enable\n",
8004                           dev->name);
8005                         sp->config.intr_type = INTA;
8006                 }
8007         }
8008
8009         if (config->intr_type ==  MSI_X) {
8010                 for (i = 0; i < config->rx_ring_num ; i++)
8011                         netif_napi_add(dev, &mac_control->rings[i].napi,
8012                                 s2io_poll_msix, 64);
8013         } else {
8014                 netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
8015         }
8016
8017         /* Not needed for Herc */
8018         if (sp->device_type & XFRAME_I_DEVICE) {
8019                 /*
8020                  * Fix for all "FFs" MAC address problems observed on
8021                  * Alpha platforms
8022                  */
8023                 fix_mac_address(sp);
8024                 s2io_reset(sp);
8025         }
8026
8027         /*
8028          * MAC address initialization.
8029          * For now only one mac address will be read and used.
8030          */
8031         bar0 = sp->bar0;
8032         val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
8033             RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
8034         writeq(val64, &bar0->rmac_addr_cmd_mem);
8035         wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
8036                       RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET);
8037         tmp64 = readq(&bar0->rmac_addr_data0_mem);
8038         mac_down = (u32) tmp64;
8039         mac_up = (u32) (tmp64 >> 32);
8040
8041         sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
8042         sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
8043         sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
8044         sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
8045         sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
8046         sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
8047
8048         /*  Set the factory defined MAC address initially   */
8049         dev->addr_len = ETH_ALEN;
8050         memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
8051         memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
8052
8053         /* initialize number of multicast & unicast MAC entries variables */
8054         if (sp->device_type == XFRAME_I_DEVICE) {
8055                 config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
8056                 config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
8057                 config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
8058         } else if (sp->device_type == XFRAME_II_DEVICE) {
8059                 config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
8060                 config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
8061                 config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
8062         }
8063
8064         /* store mac addresses from CAM to s2io_nic structure */
8065         do_s2io_store_unicast_mc(sp);
8066
8067         /* Configure MSIX vector for number of rings configured plus one */
8068         if ((sp->device_type == XFRAME_II_DEVICE) &&
8069                 (config->intr_type == MSI_X))
8070                 sp->num_entries = config->rx_ring_num + 1;
8071
8072          /* Store the values of the MSIX table in the s2io_nic structure */
8073         store_xmsi_data(sp);
8074         /* reset Nic and bring it to known state */
8075         s2io_reset(sp);
8076
8077         /*
8078          * Initialize link state flags
8079          * and the card state parameter
8080          */
8081         sp->state = 0;
8082
8083         /* Initialize spinlocks */
8084         for (i = 0; i < sp->config.tx_fifo_num; i++)
8085                 spin_lock_init(&mac_control->fifos[i].tx_lock);
8086
8087         /*
8088          * SXE-002: Configure link and activity LED to init state
8089          * on driver load.
8090          */
8091         subid = sp->pdev->subsystem_device;
8092         if ((subid & 0xFF) >= 0x07) {
8093                 val64 = readq(&bar0->gpio_control);
8094                 val64 |= 0x0000800000000000ULL;
8095                 writeq(val64, &bar0->gpio_control);
8096                 val64 = 0x0411040400000000ULL;
8097                 writeq(val64, (void __iomem *) bar0 + 0x2700);
8098                 val64 = readq(&bar0->gpio_control);
8099         }
8100
8101         sp->rx_csum = 1;        /* Rx chksum verify enabled by default */
8102
8103         if (register_netdev(dev)) {
8104                 DBG_PRINT(ERR_DBG, "Device registration failed\n");
8105                 ret = -ENODEV;
8106                 goto register_failed;
8107         }
8108         s2io_vpd_read(sp);
8109         DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
8110         DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
8111                   sp->product_name, pdev->revision);
8112         DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
8113                   s2io_driver_version);
8114         DBG_PRINT(ERR_DBG, "%s: MAC ADDR: %s\n",
8115                   dev->name, print_mac(mac, dev->dev_addr));
8116         DBG_PRINT(ERR_DBG, "SERIAL NUMBER: %s\n", sp->serial_num);
8117         if (sp->device_type & XFRAME_II_DEVICE) {
8118                 mode = s2io_print_pci_mode(sp);
8119                 if (mode < 0) {
8120                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
8121                         ret = -EBADSLT;
8122                         unregister_netdev(dev);
8123                         goto set_swap_failed;
8124                 }
8125         }
8126         switch(sp->rxd_mode) {
8127                 case RXD_MODE_1:
8128                     DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
8129                                                 dev->name);
8130                     break;
8131                 case RXD_MODE_3B:
8132                     DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
8133                                                 dev->name);
8134                     break;
8135         }
8136
8137         switch (sp->config.napi) {
8138         case 0:
8139                 DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
8140                 break;
8141         case 1:
8142                 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
8143                 break;
8144         }
8145
8146         DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
8147                 sp->config.tx_fifo_num);
8148
8149         DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,
8150                   sp->config.rx_ring_num);
8151
8152         switch(sp->config.intr_type) {
8153                 case INTA:
8154                     DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
8155                     break;
8156                 case MSI_X:
8157                     DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
8158                     break;
8159         }
8160         if (sp->config.multiq) {
8161         for (i = 0; i < sp->config.tx_fifo_num; i++)
8162                 mac_control->fifos[i].multiq = config->multiq;
8163                 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
8164                         dev->name);
8165         } else
8166                 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
8167                         dev->name);
8168
8169         switch (sp->config.tx_steering_type) {
8170         case NO_STEERING:
8171                 DBG_PRINT(ERR_DBG, "%s: No steering enabled for"
8172                         " transmit\n", dev->name);
8173                         break;
8174         case TX_PRIORITY_STEERING:
8175                 DBG_PRINT(ERR_DBG, "%s: Priority steering enabled for"
8176                         " transmit\n", dev->name);
8177                 break;
8178         case TX_DEFAULT_STEERING:
8179                 DBG_PRINT(ERR_DBG, "%s: Default steering enabled for"
8180                         " transmit\n", dev->name);
8181         }
8182
8183         if (sp->lro)
8184                 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
8185                           dev->name);
8186         if (ufo)
8187                 DBG_PRINT(ERR_DBG, "%s: UDP Fragmentation Offload(UFO)"
8188                                         " enabled\n", dev->name);
8189         /* Initialize device name */
8190         sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
8191
8192         /*
8193          * Make Link state as off at this point, when the Link change
8194          * interrupt comes the state will be automatically changed to
8195          * the right state.
8196          */
8197         netif_carrier_off(dev);
8198
8199         return 0;
8200
8201       register_failed:
8202       set_swap_failed:
8203         iounmap(sp->bar1);
8204       bar1_remap_failed:
8205         iounmap(sp->bar0);
8206       bar0_remap_failed:
8207       mem_alloc_failed:
8208         free_shared_mem(sp);
8209         pci_disable_device(pdev);
8210         pci_release_regions(pdev);
8211         pci_set_drvdata(pdev, NULL);
8212         free_netdev(dev);
8213
8214         return ret;
8215 }
8216
8217 /**
8218  * s2io_rem_nic - Free the PCI device
8219  * @pdev: structure containing the PCI related information of the device.
8220  * Description: This function is called by the Pci subsystem to release a
8221  * PCI device and free up all resource held up by the device. This could
8222  * be in response to a Hot plug event or when the driver is to be removed
8223  * from memory.
8224  */
8225
8226 static void __devexit s2io_rem_nic(struct pci_dev *pdev)
8227 {
8228         struct net_device *dev =
8229             (struct net_device *) pci_get_drvdata(pdev);
8230         struct s2io_nic *sp;
8231
8232         if (dev == NULL) {
8233                 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
8234                 return;
8235         }
8236
8237         flush_scheduled_work();
8238
8239         sp = dev->priv;
8240         unregister_netdev(dev);
8241
8242         free_shared_mem(sp);
8243         iounmap(sp->bar0);
8244         iounmap(sp->bar1);
8245         pci_release_regions(pdev);
8246         pci_set_drvdata(pdev, NULL);
8247         free_netdev(dev);
8248         pci_disable_device(pdev);
8249 }
8250
8251 /**
8252  * s2io_starter - Entry point for the driver
8253  * Description: This function is the entry point for the driver. It verifies
8254  * the module loadable parameters and initializes PCI configuration space.
8255  */
8256
8257 static int __init s2io_starter(void)
8258 {
8259         return pci_register_driver(&s2io_driver);
8260 }
8261
8262 /**
8263  * s2io_closer - Cleanup routine for the driver
8264  * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
8265  */
8266
8267 static __exit void s2io_closer(void)
8268 {
8269         pci_unregister_driver(&s2io_driver);
8270         DBG_PRINT(INIT_DBG, "cleanup done\n");
8271 }
8272
8273 module_init(s2io_starter);
8274 module_exit(s2io_closer);
8275
8276 static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
8277                 struct tcphdr **tcp, struct RxD_t *rxdp,
8278                 struct s2io_nic *sp)
8279 {
8280         int ip_off;
8281         u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
8282
8283         if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
8284                 DBG_PRINT(INIT_DBG,"%s: Non-TCP frames not supported for LRO\n",
8285                           __FUNCTION__);
8286                 return -1;
8287         }
8288
8289         /* Checking for DIX type or DIX type with VLAN */
8290         if ((l2_type == 0)
8291                 || (l2_type == 4)) {
8292                 ip_off = HEADER_ETHERNET_II_802_3_SIZE;
8293                 /*
8294                  * If vlan stripping is disabled and the frame is VLAN tagged,
8295                  * shift the offset by the VLAN header size bytes.
8296                  */
8297                 if ((!vlan_strip_flag) &&
8298                         (rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
8299                         ip_off += HEADER_VLAN_SIZE;
8300         } else {
8301                 /* LLC, SNAP etc are considered non-mergeable */
8302                 return -1;
8303         }
8304
8305         *ip = (struct iphdr *)((u8 *)buffer + ip_off);
8306         ip_len = (u8)((*ip)->ihl);
8307         ip_len <<= 2;
8308         *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len);
8309
8310         return 0;
8311 }
8312
8313 static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
8314                                   struct tcphdr *tcp)
8315 {
8316         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8317         if ((lro->iph->saddr != ip->saddr) || (lro->iph->daddr != ip->daddr) ||
8318            (lro->tcph->source != tcp->source) || (lro->tcph->dest != tcp->dest))
8319                 return -1;
8320         return 0;
8321 }
8322
8323 static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
8324 {
8325         return(ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2));
8326 }
8327
8328 static void initiate_new_session(struct lro *lro, u8 *l2h,
8329         struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len, u16 vlan_tag)
8330 {
8331         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8332         lro->l2h = l2h;
8333         lro->iph = ip;
8334         lro->tcph = tcp;
8335         lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
8336         lro->tcp_ack = tcp->ack_seq;
8337         lro->sg_num = 1;
8338         lro->total_len = ntohs(ip->tot_len);
8339         lro->frags_len = 0;
8340         lro->vlan_tag = vlan_tag;
8341         /*
8342          * check if we saw TCP timestamp. Other consistency checks have
8343          * already been done.
8344          */
8345         if (tcp->doff == 8) {
8346                 __be32 *ptr;
8347                 ptr = (__be32 *)(tcp+1);
8348                 lro->saw_ts = 1;
8349                 lro->cur_tsval = ntohl(*(ptr+1));
8350                 lro->cur_tsecr = *(ptr+2);
8351         }
8352         lro->in_use = 1;
8353 }
8354
8355 static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro)
8356 {
8357         struct iphdr *ip = lro->iph;
8358         struct tcphdr *tcp = lro->tcph;
8359         __sum16 nchk;
8360         struct stat_block *statinfo = sp->mac_control.stats_info;
8361         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8362
8363         /* Update L3 header */
8364         ip->tot_len = htons(lro->total_len);
8365         ip->check = 0;
8366         nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl);
8367         ip->check = nchk;
8368
8369         /* Update L4 header */
8370         tcp->ack_seq = lro->tcp_ack;
8371         tcp->window = lro->window;
8372
8373         /* Update tsecr field if this session has timestamps enabled */
8374         if (lro->saw_ts) {
8375                 __be32 *ptr = (__be32 *)(tcp + 1);
8376                 *(ptr+2) = lro->cur_tsecr;
8377         }
8378
8379         /* Update counters required for calculation of
8380          * average no. of packets aggregated.
8381          */
8382         statinfo->sw_stat.sum_avg_pkts_aggregated += lro->sg_num;
8383         statinfo->sw_stat.num_aggregations++;
8384 }
8385
8386 static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
8387                 struct tcphdr *tcp, u32 l4_pyld)
8388 {
8389         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8390         lro->total_len += l4_pyld;
8391         lro->frags_len += l4_pyld;
8392         lro->tcp_next_seq += l4_pyld;
8393         lro->sg_num++;
8394
8395         /* Update ack seq no. and window ad(from this pkt) in LRO object */
8396         lro->tcp_ack = tcp->ack_seq;
8397         lro->window = tcp->window;
8398
8399         if (lro->saw_ts) {
8400                 __be32 *ptr;
8401                 /* Update tsecr and tsval from this packet */
8402                 ptr = (__be32 *)(tcp+1);
8403                 lro->cur_tsval = ntohl(*(ptr+1));
8404                 lro->cur_tsecr = *(ptr + 2);
8405         }
8406 }
8407
8408 static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip,
8409                                     struct tcphdr *tcp, u32 tcp_pyld_len)
8410 {
8411         u8 *ptr;
8412
8413         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8414
8415         if (!tcp_pyld_len) {
8416                 /* Runt frame or a pure ack */
8417                 return -1;
8418         }
8419
8420         if (ip->ihl != 5) /* IP has options */
8421                 return -1;
8422
8423         /* If we see CE codepoint in IP header, packet is not mergeable */
8424         if (INET_ECN_is_ce(ipv4_get_dsfield(ip)))
8425                 return -1;
8426
8427         /* If we see ECE or CWR flags in TCP header, packet is not mergeable */
8428         if (tcp->urg || tcp->psh || tcp->rst || tcp->syn || tcp->fin ||
8429                                     tcp->ece || tcp->cwr || !tcp->ack) {
8430                 /*
8431                  * Currently recognize only the ack control word and
8432                  * any other control field being set would result in
8433                  * flushing the LRO session
8434                  */
8435                 return -1;
8436         }
8437
8438         /*
8439          * Allow only one TCP timestamp option. Don't aggregate if
8440          * any other options are detected.
8441          */
8442         if (tcp->doff != 5 && tcp->doff != 8)
8443                 return -1;
8444
8445         if (tcp->doff == 8) {
8446                 ptr = (u8 *)(tcp + 1);
8447                 while (*ptr == TCPOPT_NOP)
8448                         ptr++;
8449                 if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP)
8450                         return -1;
8451
8452                 /* Ensure timestamp value increases monotonically */
8453                 if (l_lro)
8454                         if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2))))
8455                                 return -1;
8456
8457                 /* timestamp echo reply should be non-zero */
8458                 if (*((__be32 *)(ptr+6)) == 0)
8459                         return -1;
8460         }
8461
8462         return 0;
8463 }
8464
8465 static int
8466 s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer, u8 **tcp,
8467         u32 *tcp_len, struct lro **lro, struct RxD_t *rxdp,
8468         struct s2io_nic *sp)
8469 {
8470         struct iphdr *ip;
8471         struct tcphdr *tcph;
8472         int ret = 0, i;
8473         u16 vlan_tag = 0;
8474
8475         if (!(ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
8476                                          rxdp, sp))) {
8477                 DBG_PRINT(INFO_DBG,"IP Saddr: %x Daddr: %x\n",
8478                           ip->saddr, ip->daddr);
8479         } else
8480                 return ret;
8481
8482         vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2);
8483         tcph = (struct tcphdr *)*tcp;
8484         *tcp_len = get_l4_pyld_length(ip, tcph);
8485         for (i=0; i<MAX_LRO_SESSIONS; i++) {
8486                 struct lro *l_lro = &ring_data->lro0_n[i];
8487                 if (l_lro->in_use) {
8488                         if (check_for_socket_match(l_lro, ip, tcph))
8489                                 continue;
8490                         /* Sock pair matched */
8491                         *lro = l_lro;
8492
8493                         if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
8494                                 DBG_PRINT(INFO_DBG, "%s:Out of order. expected "
8495                                           "0x%x, actual 0x%x\n", __FUNCTION__,
8496                                           (*lro)->tcp_next_seq,
8497                                           ntohl(tcph->seq));
8498
8499                                 sp->mac_control.stats_info->
8500                                    sw_stat.outof_sequence_pkts++;
8501                                 ret = 2;
8502                                 break;
8503                         }
8504
8505                         if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,*tcp_len))
8506                                 ret = 1; /* Aggregate */
8507                         else
8508                                 ret = 2; /* Flush both */
8509                         break;
8510                 }
8511         }
8512
8513         if (ret == 0) {
8514                 /* Before searching for available LRO objects,
8515                  * check if the pkt is L3/L4 aggregatable. If not
8516                  * don't create new LRO session. Just send this
8517                  * packet up.
8518                  */
8519                 if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len)) {
8520                         return 5;
8521                 }
8522
8523                 for (i=0; i<MAX_LRO_SESSIONS; i++) {
8524                         struct lro *l_lro = &ring_data->lro0_n[i];
8525                         if (!(l_lro->in_use)) {
8526                                 *lro = l_lro;
8527                                 ret = 3; /* Begin anew */
8528                                 break;
8529                         }
8530                 }
8531         }
8532
8533         if (ret == 0) { /* sessions exceeded */
8534                 DBG_PRINT(INFO_DBG,"%s:All LRO sessions already in use\n",
8535                           __FUNCTION__);
8536                 *lro = NULL;
8537                 return ret;
8538         }
8539
8540         switch (ret) {
8541                 case 3:
8542                         initiate_new_session(*lro, buffer, ip, tcph, *tcp_len,
8543                                                                 vlan_tag);
8544                         break;
8545                 case 2:
8546                         update_L3L4_header(sp, *lro);
8547                         break;
8548                 case 1:
8549                         aggregate_new_rx(*lro, ip, tcph, *tcp_len);
8550                         if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
8551                                 update_L3L4_header(sp, *lro);
8552                                 ret = 4; /* Flush the LRO */
8553                         }
8554                         break;
8555                 default:
8556                         DBG_PRINT(ERR_DBG,"%s:Dont know, can't say!!\n",
8557                                 __FUNCTION__);
8558                         break;
8559         }
8560
8561         return ret;
8562 }
8563
8564 static void clear_lro_session(struct lro *lro)
8565 {
8566         static u16 lro_struct_size = sizeof(struct lro);
8567
8568         memset(lro, 0, lro_struct_size);
8569 }
8570
8571 static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag)
8572 {
8573         struct net_device *dev = skb->dev;
8574         struct s2io_nic *sp = dev->priv;
8575
8576         skb->protocol = eth_type_trans(skb, dev);
8577         if (sp->vlgrp && vlan_tag
8578                 && (vlan_strip_flag)) {
8579                 /* Queueing the vlan frame to the upper layer */
8580                 if (sp->config.napi)
8581                         vlan_hwaccel_receive_skb(skb, sp->vlgrp, vlan_tag);
8582                 else
8583                         vlan_hwaccel_rx(skb, sp->vlgrp, vlan_tag);
8584         } else {
8585                 if (sp->config.napi)
8586                         netif_receive_skb(skb);
8587                 else
8588                         netif_rx(skb);
8589         }
8590 }
8591
8592 static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
8593                            struct sk_buff *skb,
8594                            u32 tcp_len)
8595 {
8596         struct sk_buff *first = lro->parent;
8597
8598         first->len += tcp_len;
8599         first->data_len = lro->frags_len;
8600         skb_pull(skb, (skb->len - tcp_len));
8601         if (skb_shinfo(first)->frag_list)
8602                 lro->last_frag->next = skb;
8603         else
8604                 skb_shinfo(first)->frag_list = skb;
8605         first->truesize += skb->truesize;
8606         lro->last_frag = skb;
8607         sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
8608         return;
8609 }
8610
8611 /**
8612  * s2io_io_error_detected - called when PCI error is detected
8613  * @pdev: Pointer to PCI device
8614  * @state: The current pci connection state
8615  *
8616  * This function is called after a PCI bus error affecting
8617  * this device has been detected.
8618  */
8619 static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
8620                                                pci_channel_state_t state)
8621 {
8622         struct net_device *netdev = pci_get_drvdata(pdev);
8623         struct s2io_nic *sp = netdev->priv;
8624
8625         netif_device_detach(netdev);
8626
8627         if (netif_running(netdev)) {
8628                 /* Bring down the card, while avoiding PCI I/O */
8629                 do_s2io_card_down(sp, 0);
8630         }
8631         pci_disable_device(pdev);
8632
8633         return PCI_ERS_RESULT_NEED_RESET;
8634 }
8635
8636 /**
8637  * s2io_io_slot_reset - called after the pci bus has been reset.
8638  * @pdev: Pointer to PCI device
8639  *
8640  * Restart the card from scratch, as if from a cold-boot.
8641  * At this point, the card has exprienced a hard reset,
8642  * followed by fixups by BIOS, and has its config space
8643  * set up identically to what it was at cold boot.
8644  */
8645 static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
8646 {
8647         struct net_device *netdev = pci_get_drvdata(pdev);
8648         struct s2io_nic *sp = netdev->priv;
8649
8650         if (pci_enable_device(pdev)) {
8651                 printk(KERN_ERR "s2io: "
8652                        "Cannot re-enable PCI device after reset.\n");
8653                 return PCI_ERS_RESULT_DISCONNECT;
8654         }
8655
8656         pci_set_master(pdev);
8657         s2io_reset(sp);
8658
8659         return PCI_ERS_RESULT_RECOVERED;
8660 }
8661
8662 /**
8663  * s2io_io_resume - called when traffic can start flowing again.
8664  * @pdev: Pointer to PCI device
8665  *
8666  * This callback is called when the error recovery driver tells
8667  * us that its OK to resume normal operation.
8668  */
8669 static void s2io_io_resume(struct pci_dev *pdev)
8670 {
8671         struct net_device *netdev = pci_get_drvdata(pdev);
8672         struct s2io_nic *sp = netdev->priv;
8673
8674         if (netif_running(netdev)) {
8675                 if (s2io_card_up(sp)) {
8676                         printk(KERN_ERR "s2io: "
8677                                "Can't bring device back up after reset.\n");
8678                         return;
8679                 }
8680
8681                 if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
8682                         s2io_card_down(sp);
8683                         printk(KERN_ERR "s2io: "
8684                                "Can't resetore mac addr after reset.\n");
8685                         return;
8686                 }
8687         }
8688
8689         netif_device_attach(netdev);
8690         netif_tx_wake_all_queues(netdev);
8691 }