git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/dispatcher/dsopcode.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dsopcode - Dispatcher Op Region support and handling of
   4  *                         "control" opcodes
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2006, R. Byron Moore
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include <acpi/acparser.h>
  47 #include <acpi/amlcode.h>
  48 #include <acpi/acdispat.h>
  49 #include <acpi/acinterp.h>
  50 #include <acpi/acnamesp.h>
  51 #include <acpi/acevents.h>
  52
  53 #define _COMPONENT          ACPI_DISPATCHER
  54 ACPI_MODULE_NAME("dsopcode")
  55
  56 /* Local prototypes */
  57 static acpi_status
  58 acpi_ds_execute_arguments(struct acpi_namespace_node *node,
  59                           struct acpi_namespace_node *scope_node,
  60                           u32 aml_length, u8 * aml_start);
  61
  62 static acpi_status
  63 acpi_ds_init_buffer_field(u16 aml_opcode,
  64                           union acpi_operand_object *obj_desc,
  65                           union acpi_operand_object *buffer_desc,
  66                           union acpi_operand_object *offset_desc,
  67                           union acpi_operand_object *length_desc,
  68                           union acpi_operand_object *result_desc);
  69
  70 /*******************************************************************************
  71  *
  72  * FUNCTION:    acpi_ds_execute_arguments
  73  *
  74  * PARAMETERS:  Node                - Object NS node
  75  *              scope_node          - Parent NS node
  76  *              aml_length          - Length of executable AML
  77  *              aml_start           - Pointer to the AML
  78  *
  79  * RETURN:      Status.
  80  *
  81  * DESCRIPTION: Late (deferred) execution of region or field arguments
  82  *
  83  ******************************************************************************/
  84
  85 static acpi_status
  86 acpi_ds_execute_arguments(struct acpi_namespace_node *node,
  87                           struct acpi_namespace_node *scope_node,
  88                           u32 aml_length, u8 * aml_start)
  89 {
  90         acpi_status status;
  91         union acpi_parse_object *op;
  92         struct acpi_walk_state *walk_state;
  93
  94         ACPI_FUNCTION_TRACE(ds_execute_arguments);
  95
  96         /*
  97          * Allocate a new parser op to be the root of the parsed tree
  98          */
  99         op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
 100         if (!op) {
 101                 return_ACPI_STATUS(AE_NO_MEMORY);
 102         }
 103
 104         /* Save the Node for use in acpi_ps_parse_aml */
 105
 106         op->common.node = scope_node;
 107
 108         /* Create and initialize a new parser state */
 109
 110         walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
 111         if (!walk_state) {
 112                 status = AE_NO_MEMORY;
 113                 goto cleanup;
 114         }
 115
 116         status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
 117                                        aml_length, NULL, 1);
 118         if (ACPI_FAILURE(status)) {
 119                 acpi_ds_delete_walk_state(walk_state);
 120                 goto cleanup;
 121         }
 122
 123         /* Mark this parse as a deferred opcode */
 124
 125         walk_state->parse_flags = ACPI_PARSE_DEFERRED_OP;
 126         walk_state->deferred_node = node;
 127
 128         /* Pass1: Parse the entire declaration */
 129
 130         status = acpi_ps_parse_aml(walk_state);
 131         if (ACPI_FAILURE(status)) {
 132                 goto cleanup;
 133         }
 134
 135         /* Get and init the Op created above */
 136
 137         op->common.node = node;
 138         acpi_ps_delete_parse_tree(op);
 139
 140         /* Evaluate the deferred arguments */
 141
 142         op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
 143         if (!op) {
 144                 return_ACPI_STATUS(AE_NO_MEMORY);
 145         }
 146
 147         op->common.node = scope_node;
 148
 149         /* Create and initialize a new parser state */
 150
 151         walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
 152         if (!walk_state) {
 153                 status = AE_NO_MEMORY;
 154                 goto cleanup;
 155         }
 156
 157         /* Execute the opcode and arguments */
 158
 159         status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
 160                                        aml_length, NULL, 3);
 161         if (ACPI_FAILURE(status)) {
 162                 acpi_ds_delete_walk_state(walk_state);
 163                 goto cleanup;
 164         }
 165
 166         /* Mark this execution as a deferred opcode */
 167
 168         walk_state->deferred_node = node;
 169         status = acpi_ps_parse_aml(walk_state);
 170
 171       cleanup:
 172         acpi_ps_delete_parse_tree(op);
 173         return_ACPI_STATUS(status);
 174 }
 175
 176 /*******************************************************************************
 177  *
 178  * FUNCTION:    acpi_ds_get_buffer_field_arguments
 179  *
 180  * PARAMETERS:  obj_desc        - A valid buffer_field object
 181  *
 182  * RETURN:      Status.
 183  *
 184  * DESCRIPTION: Get buffer_field Buffer and Index. This implements the late
 185  *              evaluation of these field attributes.
 186  *
 187  ******************************************************************************/
 188
 189 acpi_status
 190 acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc)
 191 {
 192         union acpi_operand_object *extra_desc;
 193         struct acpi_namespace_node *node;
 194         acpi_status status;
 195
 196         ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_field_arguments, obj_desc);
 197
 198         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 199                 return_ACPI_STATUS(AE_OK);
 200         }
 201
 202         /* Get the AML pointer (method object) and buffer_field node */
 203
 204         extra_desc = acpi_ns_get_secondary_object(obj_desc);
 205         node = obj_desc->buffer_field.node;
 206
 207         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 208                         (ACPI_TYPE_BUFFER_FIELD, node, NULL));
 209         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n",
 210                           acpi_ut_get_node_name(node)));
 211
 212         /* Execute the AML code for the term_arg arguments */
 213
 214         status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
 215                                            extra_desc->extra.aml_length,
 216                                            extra_desc->extra.aml_start);
 217         return_ACPI_STATUS(status);
 218 }
 219
 220 /*******************************************************************************
 221  *
 222  * FUNCTION:    acpi_ds_get_buffer_arguments
 223  *
 224  * PARAMETERS:  obj_desc        - A valid Buffer object
 225  *
 226  * RETURN:      Status.
 227  *
 228  * DESCRIPTION: Get Buffer length and initializer byte list.  This implements
 229  *              the late evaluation of these attributes.
 230  *
 231  ******************************************************************************/
 232
 233 acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc)
 234 {
 235         struct acpi_namespace_node *node;
 236         acpi_status status;
 237
 238         ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_arguments, obj_desc);
 239
 240         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 241                 return_ACPI_STATUS(AE_OK);
 242         }
 243
 244         /* Get the Buffer node */
 245
 246         node = obj_desc->buffer.node;
 247         if (!node) {
 248                 ACPI_ERROR((AE_INFO,
 249                             "No pointer back to NS node in buffer obj %p",
 250                             obj_desc));
 251                 return_ACPI_STATUS(AE_AML_INTERNAL);
 252         }
 253
 254         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Buffer Arg Init\n"));
 255
 256         /* Execute the AML code for the term_arg arguments */
 257
 258         status = acpi_ds_execute_arguments(node, node,
 259                                            obj_desc->buffer.aml_length,
 260                                            obj_desc->buffer.aml_start);
 261         return_ACPI_STATUS(status);
 262 }
 263
 264 /*******************************************************************************
 265  *
 266  * FUNCTION:    acpi_ds_get_package_arguments
 267  *
 268  * PARAMETERS:  obj_desc        - A valid Package object
 269  *
 270  * RETURN:      Status.
 271  *
 272  * DESCRIPTION: Get Package length and initializer byte list.  This implements
 273  *              the late evaluation of these attributes.
 274  *
 275  ******************************************************************************/
 276
 277 acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc)
 278 {
 279         struct acpi_namespace_node *node;
 280         acpi_status status;
 281
 282         ACPI_FUNCTION_TRACE_PTR(ds_get_package_arguments, obj_desc);
 283
 284         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 285                 return_ACPI_STATUS(AE_OK);
 286         }
 287
 288         /* Get the Package node */
 289
 290         node = obj_desc->package.node;
 291         if (!node) {
 292                 ACPI_ERROR((AE_INFO,
 293                             "No pointer back to NS node in package %p",
 294                             obj_desc));
 295                 return_ACPI_STATUS(AE_AML_INTERNAL);
 296         }
 297
 298         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Package Arg Init\n"));
 299
 300         /* Execute the AML code for the term_arg arguments */
 301
 302         status = acpi_ds_execute_arguments(node, node,
 303                                            obj_desc->package.aml_length,
 304                                            obj_desc->package.aml_start);
 305         return_ACPI_STATUS(status);
 306 }
 307
 308 /*****************************************************************************
 309  *
 310  * FUNCTION:    acpi_ds_get_region_arguments
 311  *
 312  * PARAMETERS:  obj_desc        - A valid region object
 313  *
 314  * RETURN:      Status.
 315  *
 316  * DESCRIPTION: Get region address and length.  This implements the late
 317  *              evaluation of these region attributes.
 318  *
 319  ****************************************************************************/
 320
 321 acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
 322 {
 323         struct acpi_namespace_node *node;
 324         acpi_status status;
 325         union acpi_operand_object *extra_desc;
 326
 327         ACPI_FUNCTION_TRACE_PTR(ds_get_region_arguments, obj_desc);
 328
 329         if (obj_desc->region.flags & AOPOBJ_DATA_VALID) {
 330                 return_ACPI_STATUS(AE_OK);
 331         }
 332
 333         extra_desc = acpi_ns_get_secondary_object(obj_desc);
 334         if (!extra_desc) {
 335                 return_ACPI_STATUS(AE_NOT_EXIST);
 336         }
 337
 338         /* Get the Region node */
 339
 340         node = obj_desc->region.node;
 341
 342         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 343                         (ACPI_TYPE_REGION, node, NULL));
 344
 345         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n",
 346                           acpi_ut_get_node_name(node),
 347                           extra_desc->extra.aml_start));
 348
 349         /* Execute the argument AML */
 350
 351         status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
 352                                            extra_desc->extra.aml_length,
 353                                            extra_desc->extra.aml_start);
 354         if (ACPI_FAILURE(status)) {
 355                 return_ACPI_STATUS(status);
 356         }
 357
 358         /* Validate the region address/length via the host OS */
 359
 360         status = acpi_os_validate_address(obj_desc->region.space_id,
 361                                           obj_desc->region.address,
 362                                           (acpi_size) obj_desc->region.length);
 363         if (ACPI_FAILURE(status)) {
 364                 /*
 365                  * Invalid address/length. We will emit an error message and mark
 366                  * the region as invalid, so that it will cause an additional error if
 367                  * it is ever used. Then return AE_OK.
 368                  */
 369                 ACPI_EXCEPTION((AE_INFO, status,
 370                                 "During address validation of OpRegion [%4.4s]",
 371                                 node->name.ascii));
 372                 obj_desc->common.flags |= AOPOBJ_INVALID;
 373                 status = AE_OK;
 374         }
 375
 376         return_ACPI_STATUS(status);
 377 }
 378
 379 /*******************************************************************************
 380  *
 381  * FUNCTION:    acpi_ds_initialize_region
 382  *
 383  * PARAMETERS:  obj_handle      - Region namespace node
 384  *
 385  * RETURN:      Status
 386  *
 387  * DESCRIPTION: Front end to ev_initialize_region
 388  *
 389  ******************************************************************************/
 390
 391 acpi_status acpi_ds_initialize_region(acpi_handle obj_handle)
 392 {
 393         union acpi_operand_object *obj_desc;
 394         acpi_status status;
 395
 396         obj_desc = acpi_ns_get_attached_object(obj_handle);
 397
 398         /* Namespace is NOT locked */
 399
 400         status = acpi_ev_initialize_region(obj_desc, FALSE);
 401         return (status);
 402 }
 403
 404 /*******************************************************************************
 405  *
 406  * FUNCTION:    acpi_ds_init_buffer_field
 407  *
 408  * PARAMETERS:  aml_opcode      - create_xxx_field
 409  *              obj_desc        - buffer_field object
 410  *              buffer_desc     - Host Buffer
 411  *              offset_desc     - Offset into buffer
 412  *              length_desc     - Length of field (CREATE_FIELD_OP only)
 413  *              result_desc     - Where to store the result
 414  *
 415  * RETURN:      Status
 416  *
 417  * DESCRIPTION: Perform actual initialization of a buffer field
 418  *
 419  ******************************************************************************/
 420
 421 static acpi_status
 422 acpi_ds_init_buffer_field(u16 aml_opcode,
 423                           union acpi_operand_object *obj_desc,
 424                           union acpi_operand_object *buffer_desc,
 425                           union acpi_operand_object *offset_desc,
 426                           union acpi_operand_object *length_desc,
 427                           union acpi_operand_object *result_desc)
 428 {
 429         u32 offset;
 430         u32 bit_offset;
 431         u32 bit_count;
 432         u8 field_flags;
 433         acpi_status status;
 434
 435         ACPI_FUNCTION_TRACE_PTR(ds_init_buffer_field, obj_desc);
 436
 437         /* Host object must be a Buffer */
 438
 439         if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) {
 440                 ACPI_ERROR((AE_INFO,
 441                             "Target of Create Field is not a Buffer object - %s",
 442                             acpi_ut_get_object_type_name(buffer_desc)));
 443
 444                 status = AE_AML_OPERAND_TYPE;
 445                 goto cleanup;
 446         }
 447
 448         /*
 449          * The last parameter to all of these opcodes (result_desc) started
 450          * out as a name_string, and should therefore now be a NS node
 451          * after resolution in acpi_ex_resolve_operands().
 452          */
 453         if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
 454                 ACPI_ERROR((AE_INFO,
 455                             "(%s) destination not a NS Node [%s]",
 456                             acpi_ps_get_opcode_name(aml_opcode),
 457                             acpi_ut_get_descriptor_name(result_desc)));
 458
 459                 status = AE_AML_OPERAND_TYPE;
 460                 goto cleanup;
 461         }
 462
 463         offset = (u32) offset_desc->integer.value;
 464
 465         /*
 466          * Setup the Bit offsets and counts, according to the opcode
 467          */
 468         switch (aml_opcode) {
 469         case AML_CREATE_FIELD_OP:
 470
 471                 /* Offset is in bits, count is in bits */
 472
 473                 field_flags = AML_FIELD_ACCESS_BYTE;
 474                 bit_offset = offset;
 475                 bit_count = (u32) length_desc->integer.value;
 476
 477                 /* Must have a valid (>0) bit count */
 478
 479                 if (bit_count == 0) {
 480                         ACPI_ERROR((AE_INFO,
 481                                     "Attempt to CreateField of length zero"));
 482                         status = AE_AML_OPERAND_VALUE;
 483                         goto cleanup;
 484                 }
 485                 break;
 486
 487         case AML_CREATE_BIT_FIELD_OP:
 488
 489                 /* Offset is in bits, Field is one bit */
 490
 491                 bit_offset = offset;
 492                 bit_count = 1;
 493                 field_flags = AML_FIELD_ACCESS_BYTE;
 494                 break;
 495
 496         case AML_CREATE_BYTE_FIELD_OP:
 497
 498                 /* Offset is in bytes, field is one byte */
 499
 500                 bit_offset = 8 * offset;
 501                 bit_count = 8;
 502                 field_flags = AML_FIELD_ACCESS_BYTE;
 503                 break;
 504
 505         case AML_CREATE_WORD_FIELD_OP:
 506
 507                 /* Offset is in bytes, field is one word */
 508
 509                 bit_offset = 8 * offset;
 510                 bit_count = 16;
 511                 field_flags = AML_FIELD_ACCESS_WORD;
 512                 break;
 513
 514         case AML_CREATE_DWORD_FIELD_OP:
 515
 516                 /* Offset is in bytes, field is one dword */
 517
 518                 bit_offset = 8 * offset;
 519                 bit_count = 32;
 520                 field_flags = AML_FIELD_ACCESS_DWORD;
 521                 break;
 522
 523         case AML_CREATE_QWORD_FIELD_OP:
 524
 525                 /* Offset is in bytes, field is one qword */
 526
 527                 bit_offset = 8 * offset;
 528                 bit_count = 64;
 529                 field_flags = AML_FIELD_ACCESS_QWORD;
 530                 break;
 531
 532         default:
 533
 534                 ACPI_ERROR((AE_INFO,
 535                             "Unknown field creation opcode %02x", aml_opcode));
 536                 status = AE_AML_BAD_OPCODE;
 537                 goto cleanup;
 538         }
 539
 540         /* Entire field must fit within the current length of the buffer */
 541
 542         if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
 543                 ACPI_ERROR((AE_INFO,
 544                             "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)",
 545                             acpi_ut_get_node_name(result_desc),
 546                             bit_offset + bit_count,
 547                             acpi_ut_get_node_name(buffer_desc->buffer.node),
 548                             8 * (u32) buffer_desc->buffer.length));
 549                 status = AE_AML_BUFFER_LIMIT;
 550                 goto cleanup;
 551         }
 552
 553         /*
 554          * Initialize areas of the field object that are common to all fields
 555          * For field_flags, use LOCK_RULE = 0 (NO_LOCK),
 556          * UPDATE_RULE = 0 (UPDATE_PRESERVE)
 557          */
 558         status = acpi_ex_prep_common_field_object(obj_desc, field_flags, 0,
 559                                                   bit_offset, bit_count);
 560         if (ACPI_FAILURE(status)) {
 561                 goto cleanup;
 562         }
 563
 564         obj_desc->buffer_field.buffer_obj = buffer_desc;
 565
 566         /* Reference count for buffer_desc inherits obj_desc count */
 567
 568         buffer_desc->common.reference_count = (u16)
 569             (buffer_desc->common.reference_count +
 570              obj_desc->common.reference_count);
 571
 572       cleanup:
 573
 574         /* Always delete the operands */
 575
 576         acpi_ut_remove_reference(offset_desc);
 577         acpi_ut_remove_reference(buffer_desc);
 578
 579         if (aml_opcode == AML_CREATE_FIELD_OP) {
 580                 acpi_ut_remove_reference(length_desc);
 581         }
 582
 583         /* On failure, delete the result descriptor */
 584
 585         if (ACPI_FAILURE(status)) {
 586                 acpi_ut_remove_reference(result_desc);  /* Result descriptor */
 587         } else {
 588                 /* Now the address and length are valid for this buffer_field */
 589
 590                 obj_desc->buffer_field.flags |= AOPOBJ_DATA_VALID;
 591         }
 592
 593         return_ACPI_STATUS(status);
 594 }
 595
 596 /*******************************************************************************
 597  *
 598  * FUNCTION:    acpi_ds_eval_buffer_field_operands
 599  *
 600  * PARAMETERS:  walk_state      - Current walk
 601  *              Op              - A valid buffer_field Op object
 602  *
 603  * RETURN:      Status
 604  *
 605  * DESCRIPTION: Get buffer_field Buffer and Index
 606  *              Called from acpi_ds_exec_end_op during buffer_field parse tree walk
 607  *
 608  ******************************************************************************/
 609
 610 acpi_status
 611 acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
 612                                    union acpi_parse_object *op)
 613 {
 614         acpi_status status;
 615         union acpi_operand_object *obj_desc;
 616         struct acpi_namespace_node *node;
 617         union acpi_parse_object *next_op;
 618
 619         ACPI_FUNCTION_TRACE_PTR(ds_eval_buffer_field_operands, op);
 620
 621         /*
 622          * This is where we evaluate the address and length fields of the
 623          * create_xxx_field declaration
 624          */
 625         node = op->common.node;
 626
 627         /* next_op points to the op that holds the Buffer */
 628
 629         next_op = op->common.value.arg;
 630
 631         /* Evaluate/create the address and length operands */
 632
 633         status = acpi_ds_create_operands(walk_state, next_op);
 634         if (ACPI_FAILURE(status)) {
 635                 return_ACPI_STATUS(status);
 636         }
 637
 638         obj_desc = acpi_ns_get_attached_object(node);
 639         if (!obj_desc) {
 640                 return_ACPI_STATUS(AE_NOT_EXIST);
 641         }
 642
 643         /* Resolve the operands */
 644
 645         status = acpi_ex_resolve_operands(op->common.aml_opcode,
 646                                           ACPI_WALK_OPERANDS, walk_state);
 647
 648         ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
 649                            acpi_ps_get_opcode_name(op->common.aml_opcode),
 650                            walk_state->num_operands,
 651                            "after AcpiExResolveOperands");
 652
 653         if (ACPI_FAILURE(status)) {
 654                 ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)",
 655                             acpi_ps_get_opcode_name(op->common.aml_opcode),
 656                             status));
 657
 658                 return_ACPI_STATUS(status);
 659         }
 660
 661         /* Initialize the Buffer Field */
 662
 663         if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
 664
 665                 /* NOTE: Slightly different operands for this opcode */
 666
 667                 status =
 668                     acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
 669                                               walk_state->operands[0],
 670                                               walk_state->operands[1],
 671                                               walk_state->operands[2],
 672                                               walk_state->operands[3]);
 673         } else {
 674                 /* All other, create_xxx_field opcodes */
 675
 676                 status =
 677                     acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
 678                                               walk_state->operands[0],
 679                                               walk_state->operands[1], NULL,
 680                                               walk_state->operands[2]);
 681         }
 682
 683         return_ACPI_STATUS(status);
 684 }
 685
 686 /*******************************************************************************
 687  *
 688  * FUNCTION:    acpi_ds_eval_region_operands
 689  *
 690  * PARAMETERS:  walk_state      - Current walk
 691  *              Op              - A valid region Op object
 692  *
 693  * RETURN:      Status
 694  *
 695  * DESCRIPTION: Get region address and length
 696  *              Called from acpi_ds_exec_end_op during op_region parse tree walk
 697  *
 698  ******************************************************************************/
 699
 700 acpi_status
 701 acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
 702                              union acpi_parse_object *op)
 703 {
 704         acpi_status status;
 705         union acpi_operand_object *obj_desc;
 706         union acpi_operand_object *operand_desc;
 707         struct acpi_namespace_node *node;
 708         union acpi_parse_object *next_op;
 709
 710         ACPI_FUNCTION_TRACE_PTR(ds_eval_region_operands, op);
 711
 712         /*
 713          * This is where we evaluate the address and length fields of the
 714          * op_region declaration
 715          */
 716         node = op->common.node;
 717
 718         /* next_op points to the op that holds the space_iD */
 719
 720         next_op = op->common.value.arg;
 721
 722         /* next_op points to address op */
 723
 724         next_op = next_op->common.next;
 725
 726         /* Evaluate/create the address and length operands */
 727
 728         status = acpi_ds_create_operands(walk_state, next_op);
 729         if (ACPI_FAILURE(status)) {
 730                 return_ACPI_STATUS(status);
 731         }
 732
 733         /* Resolve the length and address operands to numbers */
 734
 735         status = acpi_ex_resolve_operands(op->common.aml_opcode,
 736                                           ACPI_WALK_OPERANDS, walk_state);
 737         if (ACPI_FAILURE(status)) {
 738                 return_ACPI_STATUS(status);
 739         }
 740
 741         ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
 742                            acpi_ps_get_opcode_name(op->common.aml_opcode),
 743                            1, "after AcpiExResolveOperands");
 744
 745         obj_desc = acpi_ns_get_attached_object(node);
 746         if (!obj_desc) {
 747                 return_ACPI_STATUS(AE_NOT_EXIST);
 748         }
 749
 750         /*
 751          * Get the length operand and save it
 752          * (at Top of stack)
 753          */
 754         operand_desc = walk_state->operands[walk_state->num_operands - 1];
 755
 756         obj_desc->region.length = (u32) operand_desc->integer.value;
 757         acpi_ut_remove_reference(operand_desc);
 758
 759         /*
 760          * Get the address and save it
 761          * (at top of stack - 1)
 762          */
 763         operand_desc = walk_state->operands[walk_state->num_operands - 2];
 764
 765         obj_desc->region.address = (acpi_physical_address)
 766             operand_desc->integer.value;
 767         acpi_ut_remove_reference(operand_desc);
 768
 769         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
 770                           obj_desc,
 771                           ACPI_FORMAT_UINT64(obj_desc->region.address),
 772                           obj_desc->region.length));
 773
 774         /* Now the address and length are valid for this opregion */
 775
 776         obj_desc->region.flags |= AOPOBJ_DATA_VALID;
 777
 778         return_ACPI_STATUS(status);
 779 }
 780
 781 /*******************************************************************************
 782  *
 783  * FUNCTION:    acpi_ds_eval_data_object_operands
 784  *
 785  * PARAMETERS:  walk_state      - Current walk
 786  *              Op              - A valid data_object Op object
 787  *              obj_desc        - data_object
 788  *
 789  * RETURN:      Status
 790  *
 791  * DESCRIPTION: Get the operands and complete the following data object types:
 792  *              Buffer, Package.
 793  *
 794  ******************************************************************************/
 795
 796 acpi_status
 797 acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state,
 798                                   union acpi_parse_object *op,
 799                                   union acpi_operand_object *obj_desc)
 800 {
 801         acpi_status status;
 802         union acpi_operand_object *arg_desc;
 803         u32 length;
 804
 805         ACPI_FUNCTION_TRACE(ds_eval_data_object_operands);
 806
 807         /* The first operand (for all of these data objects) is the length */
 808
 809         status = acpi_ds_create_operand(walk_state, op->common.value.arg, 1);
 810         if (ACPI_FAILURE(status)) {
 811                 return_ACPI_STATUS(status);
 812         }
 813
 814         status = acpi_ex_resolve_operands(walk_state->opcode,
 815                                           &(walk_state->
 816                                             operands[walk_state->num_operands -
 817                                                      1]), walk_state);
 818         if (ACPI_FAILURE(status)) {
 819                 return_ACPI_STATUS(status);
 820         }
 821
 822         /* Extract length operand */
 823
 824         arg_desc = walk_state->operands[walk_state->num_operands - 1];
 825         length = (u32) arg_desc->integer.value;
 826
 827         /* Cleanup for length operand */
 828
 829         status = acpi_ds_obj_stack_pop(1, walk_state);
 830         if (ACPI_FAILURE(status)) {
 831                 return_ACPI_STATUS(status);
 832         }
 833
 834         acpi_ut_remove_reference(arg_desc);
 835
 836         /*
 837          * Create the actual data object
 838          */
 839         switch (op->common.aml_opcode) {
 840         case AML_BUFFER_OP:
 841
 842                 status =
 843                     acpi_ds_build_internal_buffer_obj(walk_state, op, length,
 844                                                       &obj_desc);
 845                 break;
 846
 847         case AML_PACKAGE_OP:
 848         case AML_VAR_PACKAGE_OP:
 849
 850                 status =
 851                     acpi_ds_build_internal_package_obj(walk_state, op, length,
 852                                                        &obj_desc);
 853                 break;
 854
 855         default:
 856                 return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 857         }
 858
 859         if (ACPI_SUCCESS(status)) {
 860                 /*
 861                  * Return the object in the walk_state, unless the parent is a package -
 862                  * in this case, the return object will be stored in the parse tree
 863                  * for the package.
 864                  */
 865                 if ((!op->common.parent) ||
 866                     ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
 867                      (op->common.parent->common.aml_opcode !=
 868                       AML_VAR_PACKAGE_OP)
 869                      && (op->common.parent->common.aml_opcode !=
 870                          AML_NAME_OP))) {
 871                         walk_state->result_obj = obj_desc;
 872                 }
 873         }
 874
 875         return_ACPI_STATUS(status);
 876 }
 877
 878 /*******************************************************************************
 879  *
 880  * FUNCTION:    acpi_ds_exec_begin_control_op
 881  *
 882  * PARAMETERS:  walk_list       - The list that owns the walk stack
 883  *              Op              - The control Op
 884  *
 885  * RETURN:      Status
 886  *
 887  * DESCRIPTION: Handles all control ops encountered during control method
 888  *              execution.
 889  *
 890  ******************************************************************************/
 891
 892 acpi_status
 893 acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
 894                               union acpi_parse_object *op)
 895 {
 896         acpi_status status = AE_OK;
 897         union acpi_generic_state *control_state;
 898
 899         ACPI_FUNCTION_NAME(ds_exec_begin_control_op);
 900
 901         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", op,
 902                           op->common.aml_opcode, walk_state));
 903
 904         switch (op->common.aml_opcode) {
 905         case AML_IF_OP:
 906         case AML_WHILE_OP:
 907
 908                 /*
 909                  * IF/WHILE: Create a new control state to manage these
 910                  * constructs. We need to manage these as a stack, in order
 911                  * to handle nesting.
 912                  */
 913                 control_state = acpi_ut_create_control_state();
 914                 if (!control_state) {
 915                         status = AE_NO_MEMORY;
 916                         break;
 917                 }
 918                 /*
 919                  * Save a pointer to the predicate for multiple executions
 920                  * of a loop
 921                  */
 922                 control_state->control.aml_predicate_start =
 923                     walk_state->parser_state.aml - 1;
 924                 control_state->control.package_end =
 925                     walk_state->parser_state.pkg_end;
 926                 control_state->control.opcode = op->common.aml_opcode;
 927
 928                 /* Push the control state on this walk's control stack */
 929
 930                 acpi_ut_push_generic_state(&walk_state->control_state,
 931                                            control_state);
 932                 break;
 933
 934         case AML_ELSE_OP:
 935
 936                 /* Predicate is in the state object */
 937                 /* If predicate is true, the IF was executed, ignore ELSE part */
 938
 939                 if (walk_state->last_predicate) {
 940                         status = AE_CTRL_TRUE;
 941                 }
 942
 943                 break;
 944
 945         case AML_RETURN_OP:
 946
 947                 break;
 948
 949         default:
 950                 break;
 951         }
 952
 953         return (status);
 954 }
 955
 956 /*******************************************************************************
 957  *
 958  * FUNCTION:    acpi_ds_exec_end_control_op
 959  *
 960  * PARAMETERS:  walk_list       - The list that owns the walk stack
 961  *              Op              - The control Op
 962  *
 963  * RETURN:      Status
 964  *
 965  * DESCRIPTION: Handles all control ops encountered during control method
 966  *              execution.
 967  *
 968  ******************************************************************************/
 969
 970 acpi_status
 971 acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
 972                             union acpi_parse_object * op)
 973 {
 974         acpi_status status = AE_OK;
 975         union acpi_generic_state *control_state;
 976
 977         ACPI_FUNCTION_NAME(ds_exec_end_control_op);
 978
 979         switch (op->common.aml_opcode) {
 980         case AML_IF_OP:
 981
 982                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op));
 983
 984                 /*
 985                  * Save the result of the predicate in case there is an
 986                  * ELSE to come
 987                  */
 988                 walk_state->last_predicate =
 989                     (u8) walk_state->control_state->common.value;
 990
 991                 /*
 992                  * Pop the control state that was created at the start
 993                  * of the IF and free it
 994                  */
 995                 control_state =
 996                     acpi_ut_pop_generic_state(&walk_state->control_state);
 997                 acpi_ut_delete_generic_state(control_state);
 998                 break;
 999
1000         case AML_ELSE_OP:
1001
1002                 break;
1003
1004         case AML_WHILE_OP:
1005
1006                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op));
1007
1008                 if (walk_state->control_state->common.value) {
1009
1010                         /* Predicate was true, go back and evaluate it again! */
1011
1012                         status = AE_CTRL_PENDING;
1013                 }
1014
1015                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
1016                                   "[WHILE_OP] termination! Op=%p\n", op));
1017
1018                 /* Pop this control state and free it */
1019
1020                 control_state =
1021                     acpi_ut_pop_generic_state(&walk_state->control_state);
1022
1023                 walk_state->aml_last_while =
1024                     control_state->control.aml_predicate_start;
1025                 acpi_ut_delete_generic_state(control_state);
1026                 break;
1027
1028         case AML_RETURN_OP:
1029
1030                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
1031                                   "[RETURN_OP] Op=%p Arg=%p\n", op,
1032                                   op->common.value.arg));
1033
1034                 /*
1035                  * One optional operand -- the return value
1036                  * It can be either an immediate operand or a result that
1037                  * has been bubbled up the tree
1038                  */
1039                 if (op->common.value.arg) {
1040
1041                         /* Since we have a real Return(), delete any implicit return */
1042
1043                         acpi_ds_clear_implicit_return(walk_state);
1044
1045                         /* Return statement has an immediate operand */
1046
1047                         status =
1048                             acpi_ds_create_operands(walk_state,
1049                                                     op->common.value.arg);
1050                         if (ACPI_FAILURE(status)) {
1051                                 return (status);
1052                         }
1053
1054                         /*
1055                          * If value being returned is a Reference (such as
1056                          * an arg or local), resolve it now because it may
1057                          * cease to exist at the end of the method.
1058                          */
1059                         status =
1060                             acpi_ex_resolve_to_value(&walk_state->operands[0],
1061                                                      walk_state);
1062                         if (ACPI_FAILURE(status)) {
1063                                 return (status);
1064                         }
1065
1066                         /*
1067                          * Get the return value and save as the last result
1068                          * value.  This is the only place where walk_state->return_desc
1069                          * is set to anything other than zero!
1070                          */
1071                         walk_state->return_desc = walk_state->operands[0];
1072                 } else if ((walk_state->results) &&
1073                            (walk_state->results->results.num_results > 0)) {
1074
1075                         /* Since we have a real Return(), delete any implicit return */
1076
1077                         acpi_ds_clear_implicit_return(walk_state);
1078
1079                         /*
1080                          * The return value has come from a previous calculation.
1081                          *
1082                          * If value being returned is a Reference (such as
1083                          * an arg or local), resolve it now because it may
1084                          * cease to exist at the end of the method.
1085                          *
1086                          * Allow references created by the Index operator to return unchanged.
1087                          */
1088                         if ((ACPI_GET_DESCRIPTOR_TYPE
1089                              (walk_state->results->results.obj_desc[0]) ==
1090                              ACPI_DESC_TYPE_OPERAND)
1091                             &&
1092                             (ACPI_GET_OBJECT_TYPE
1093                              (walk_state->results->results.obj_desc[0]) ==
1094                              ACPI_TYPE_LOCAL_REFERENCE)
1095                             && ((walk_state->results->results.obj_desc[0])->
1096                                 reference.opcode != AML_INDEX_OP)) {
1097                                 status =
1098                                     acpi_ex_resolve_to_value(&walk_state->
1099                                                              results->results.
1100                                                              obj_desc[0],
1101                                                              walk_state);
1102                                 if (ACPI_FAILURE(status)) {
1103                                         return (status);
1104                                 }
1105                         }
1106
1107                         walk_state->return_desc =
1108                             walk_state->results->results.obj_desc[0];
1109                 } else {
1110                         /* No return operand */
1111
1112                         if (walk_state->num_operands) {
1113                                 acpi_ut_remove_reference(walk_state->
1114                                                          operands[0]);
1115                         }
1116
1117                         walk_state->operands[0] = NULL;
1118                         walk_state->num_operands = 0;
1119                         walk_state->return_desc = NULL;
1120                 }
1121
1122                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
1123                                   "Completed RETURN_OP State=%p, RetVal=%p\n",
1124                                   walk_state, walk_state->return_desc));
1125
1126                 /* End the control method execution right now */
1127
1128                 status = AE_CTRL_TERMINATE;
1129                 break;
1130
1131         case AML_NOOP_OP:
1132
1133                 /* Just do nothing! */
1134                 break;
1135
1136         case AML_BREAK_POINT_OP:
1137
1138                 /* Call up to the OS service layer to handle this */
1139
1140                 status =
1141                     acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
1142                                    "Executed AML Breakpoint opcode");
1143
1144                 /* If and when it returns, all done. */
1145
1146                 break;
1147
1148         case AML_BREAK_OP:
1149         case AML_CONTINUE_OP:   /* ACPI 2.0 */
1150
1151                 /* Pop and delete control states until we find a while */
1152
1153                 while (walk_state->control_state &&
1154                        (walk_state->control_state->control.opcode !=
1155                         AML_WHILE_OP)) {
1156                         control_state =
1157                             acpi_ut_pop_generic_state(&walk_state->
1158                                                       control_state);
1159                         acpi_ut_delete_generic_state(control_state);
1160                 }
1161
1162                 /* No while found? */
1163
1164                 if (!walk_state->control_state) {
1165                         return (AE_AML_NO_WHILE);
1166                 }
1167
1168                 /* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */
1169
1170                 walk_state->aml_last_while =
1171                     walk_state->control_state->control.package_end;
1172
1173                 /* Return status depending on opcode */
1174
1175                 if (op->common.aml_opcode == AML_BREAK_OP) {
1176                         status = AE_CTRL_BREAK;
1177                 } else {
1178                         status = AE_CTRL_CONTINUE;
1179                 }
1180                 break;
1181
1182         default:
1183
1184                 ACPI_ERROR((AE_INFO, "Unknown control opcode=%X Op=%p",
1185                             op->common.aml_opcode, op));
1186
1187                 status = AE_AML_BAD_OPCODE;
1188                 break;
1189         }
1190
1191         return (status);
1192 }