git.oblomov.eu Git - linux-2.6/blob - drivers/usb/input/keyspan_remote.c

   1 /*
   2  * keyspan_remote: USB driver for the Keyspan DMR
   3  *
   4  * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
   5  *
   6  *      This program is free software; you can redistribute it and/or
   7  *      modify it under the terms of the GNU General Public License as
   8  *      published by the Free Software Foundation, version 2.
   9  *
  10  * This driver has been put together with the support of Innosys, Inc.
  11  * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
  12  */
  13
  14 #include <linux/config.h>
  15 #include <linux/kernel.h>
  16 #include <linux/errno.h>
  17 #include <linux/init.h>
  18 #include <linux/slab.h>
  19 #include <linux/module.h>
  20 #include <linux/moduleparam.h>
  21 #include <linux/input.h>
  22 #include <linux/usb.h>
  23 #include <linux/usb_input.h>
  24
  25 #define DRIVER_VERSION  "v0.1"
  26 #define DRIVER_AUTHOR   "Michael Downey <downey@zymeta.com>"
  27 #define DRIVER_DESC     "Driver for the USB Keyspan remote control."
  28 #define DRIVER_LICENSE  "GPL"
  29
  30 /* Parameters that can be passed to the driver. */
  31 static int debug;
  32 module_param(debug, int, 0444);
  33 MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
  34
  35 /* Vendor and product ids */
  36 #define USB_KEYSPAN_VENDOR_ID           0x06CD
  37 #define USB_KEYSPAN_PRODUCT_UIA11       0x0202
  38
  39 /* Defines for converting the data from the remote. */
  40 #define ZERO            0x18
  41 #define ZERO_MASK       0x1F    /* 5 bits for a 0 */
  42 #define ONE             0x3C
  43 #define ONE_MASK        0x3F    /* 6 bits for a 1 */
  44 #define SYNC            0x3F80
  45 #define SYNC_MASK       0x3FFF  /* 14 bits for a SYNC sequence */
  46 #define STOP            0x00
  47 #define STOP_MASK       0x1F    /* 5 bits for the STOP sequence */
  48 #define GAP             0xFF
  49
  50 #define RECV_SIZE       8       /* The UIA-11 type have a 8 byte limit. */
  51
  52 /* table of devices that work with this driver */
  53 static struct usb_device_id keyspan_table[] = {
  54         { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
  55         { }                                     /* Terminating entry */
  56 };
  57
  58 /* Structure to store all the real stuff that a remote sends to us. */
  59 struct keyspan_message {
  60         u16     system;
  61         u8      button;
  62         u8      toggle;
  63 };
  64
  65 /* Structure used for all the bit testing magic needed to be done. */
  66 struct bit_tester {
  67         u32     tester;
  68         int     len;
  69         int     pos;
  70         int     bits_left;
  71         u8      buffer[32];
  72 };
  73
  74 /* Structure to hold all of our driver specific stuff */
  75 struct usb_keyspan {
  76         char                            name[128];
  77         char                            phys[64];
  78         struct usb_device*              udev;
  79         struct input_dev                *input;
  80         struct usb_interface*           interface;
  81         struct usb_endpoint_descriptor* in_endpoint;
  82         struct urb*                     irq_urb;
  83         int                             open;
  84         dma_addr_t                      in_dma;
  85         unsigned char*                  in_buffer;
  86
  87         /* variables used to parse messages from remote. */
  88         struct bit_tester               data;
  89         int                             stage;
  90         int                             toggle;
  91 };
  92
  93 /*
  94  * Table that maps the 31 possible keycodes to input keys.
  95  * Currently there are 15 and 17 button models so RESERVED codes
  96  * are blank areas in the mapping.
  97  */
  98 static const int keyspan_key_table[] = {
  99         KEY_RESERVED,           /* 0 is just a place holder. */
 100         KEY_RESERVED,
 101         KEY_STOP,
 102         KEY_PLAYCD,
 103         KEY_RESERVED,
 104         KEY_PREVIOUSSONG,
 105         KEY_REWIND,
 106         KEY_FORWARD,
 107         KEY_NEXTSONG,
 108         KEY_RESERVED,
 109         KEY_RESERVED,
 110         KEY_RESERVED,
 111         KEY_PAUSE,
 112         KEY_VOLUMEUP,
 113         KEY_RESERVED,
 114         KEY_RESERVED,
 115         KEY_RESERVED,
 116         KEY_VOLUMEDOWN,
 117         KEY_RESERVED,
 118         KEY_UP,
 119         KEY_RESERVED,
 120         KEY_MUTE,
 121         KEY_LEFT,
 122         KEY_ENTER,
 123         KEY_RIGHT,
 124         KEY_RESERVED,
 125         KEY_RESERVED,
 126         KEY_DOWN,
 127         KEY_RESERVED,
 128         KEY_KPASTERISK,
 129         KEY_RESERVED,
 130         KEY_MENU
 131 };
 132
 133 static struct usb_driver keyspan_driver;
 134
 135 /*
 136  * Debug routine that prints out what we've received from the remote.
 137  */
 138 static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
 139 {
 140         char codes[4 * RECV_SIZE];
 141         int i;
 142
 143         for (i = 0; i < RECV_SIZE; i++)
 144                 snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
 145
 146         dev_info(&dev->udev->dev, "%s\n", codes);
 147 }
 148
 149 /*
 150  * Routine that manages the bit_tester structure.  It makes sure that there are
 151  * at least bits_needed bits loaded into the tester.
 152  */
 153 static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
 154 {
 155         if (dev->data.bits_left >= bits_needed)
 156                 return 0;
 157
 158         /*
 159          * Somehow we've missed the last message. The message will be repeated
 160          * though so it's not too big a deal
 161          */
 162         if (dev->data.pos >= dev->data.len) {
 163                 dev_dbg(&dev->udev->dev,
 164                         "%s - Error ran out of data. pos: %d, len: %d\n",
 165                         __FUNCTION__, dev->data.pos, dev->data.len);
 166                 return -1;
 167         }
 168
 169         /* Load as much as we can into the tester. */
 170         while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
 171                (dev->data.pos < dev->data.len)) {
 172                 dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
 173                 dev->data.bits_left += 8;
 174         }
 175
 176         return 0;
 177 }
 178
 179 /*
 180  * Routine that handles all the logic needed to parse out the message from the remote.
 181  */
 182 static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs)
 183 {
 184         int i;
 185         int found = 0;
 186         struct keyspan_message message;
 187
 188         switch(remote->stage) {
 189         case 0:
 190                 /*
 191                  * In stage 0 we want to find the start of a message.  The remote sends a 0xFF as filler.
 192                  * So the first byte that isn't a FF should be the start of a new message.
 193                  */
 194                 for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
 195
 196                 if (i < RECV_SIZE) {
 197                         memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
 198                         remote->data.len = RECV_SIZE;
 199                         remote->data.pos = 0;
 200                         remote->data.tester = 0;
 201                         remote->data.bits_left = 0;
 202                         remote->stage = 1;
 203                 }
 204                 break;
 205
 206         case 1:
 207                 /*
 208                  * Stage 1 we should have 16 bytes and should be able to detect a
 209                  * SYNC.  The SYNC is 14 bits, 7 0's and then 7 1's.
 210                  */
 211                 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
 212                 remote->data.len += RECV_SIZE;
 213
 214                 found = 0;
 215                 while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
 216                         for (i = 0; i < 8; ++i) {
 217                                 if (keyspan_load_tester(remote, 14) != 0) {
 218                                         remote->stage = 0;
 219                                         return;
 220                                 }
 221
 222                                 if ((remote->data.tester & SYNC_MASK) == SYNC) {
 223                                         remote->data.tester = remote->data.tester >> 14;
 224                                         remote->data.bits_left -= 14;
 225                                         found = 1;
 226                                         break;
 227                                 } else {
 228                                         remote->data.tester = remote->data.tester >> 1;
 229                                         --remote->data.bits_left;
 230                                 }
 231                         }
 232                 }
 233
 234                 if (!found) {
 235                         remote->stage = 0;
 236                         remote->data.len = 0;
 237                 } else {
 238                         remote->stage = 2;
 239                 }
 240                 break;
 241
 242         case 2:
 243                 /*
 244                  * Stage 2 we should have 24 bytes which will be enough for a full
 245                  * message.  We need to parse out the system code, button code,
 246                  * toggle code, and stop.
 247                  */
 248                 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
 249                 remote->data.len += RECV_SIZE;
 250
 251                 message.system = 0;
 252                 for (i = 0; i < 9; i++) {
 253                         keyspan_load_tester(remote, 6);
 254
 255                         if ((remote->data.tester & ZERO_MASK) == ZERO) {
 256                                 message.system = message.system << 1;
 257                                 remote->data.tester = remote->data.tester >> 5;
 258                                 remote->data.bits_left -= 5;
 259                         } else if ((remote->data.tester & ONE_MASK) == ONE) {
 260                                 message.system = (message.system << 1) + 1;
 261                                 remote->data.tester = remote->data.tester >> 6;
 262                                 remote->data.bits_left -= 6;
 263                         } else {
 264                                 err("%s - Unknown sequence found in system data.\n", __FUNCTION__);
 265                                 remote->stage = 0;
 266                                 return;
 267                         }
 268                 }
 269
 270                 message.button = 0;
 271                 for (i = 0; i < 5; i++) {
 272                         keyspan_load_tester(remote, 6);
 273
 274                         if ((remote->data.tester & ZERO_MASK) == ZERO) {
 275                                 message.button = message.button << 1;
 276                                 remote->data.tester = remote->data.tester >> 5;
 277                                 remote->data.bits_left -= 5;
 278                         } else if ((remote->data.tester & ONE_MASK) == ONE) {
 279                                 message.button = (message.button << 1) + 1;
 280                                 remote->data.tester = remote->data.tester >> 6;
 281                                 remote->data.bits_left -= 6;
 282                         } else {
 283                                 err("%s - Unknown sequence found in button data.\n", __FUNCTION__);
 284                                 remote->stage = 0;
 285                                 return;
 286                         }
 287                 }
 288
 289                 keyspan_load_tester(remote, 6);
 290                 if ((remote->data.tester & ZERO_MASK) == ZERO) {
 291                         message.toggle = 0;
 292                         remote->data.tester = remote->data.tester >> 5;
 293                         remote->data.bits_left -= 5;
 294                 } else if ((remote->data.tester & ONE_MASK) == ONE) {
 295                         message.toggle = 1;
 296                         remote->data.tester = remote->data.tester >> 6;
 297                         remote->data.bits_left -= 6;
 298                 } else {
 299                         err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
 300                         remote->stage = 0;
 301                         return;
 302                 }
 303
 304                 keyspan_load_tester(remote, 5);
 305                 if ((remote->data.tester & STOP_MASK) == STOP) {
 306                         remote->data.tester = remote->data.tester >> 5;
 307                         remote->data.bits_left -= 5;
 308                 } else {
 309                         err("Bad message recieved, no stop bit found.\n");
 310                 }
 311
 312                 dev_dbg(&remote->udev->dev,
 313                         "%s found valid message: system: %d, button: %d, toggle: %d\n",
 314                         __FUNCTION__, message.system, message.button, message.toggle);
 315
 316                 if (message.toggle != remote->toggle) {
 317                         input_regs(remote->input, regs);
 318                         input_report_key(remote->input, keyspan_key_table[message.button], 1);
 319                         input_report_key(remote->input, keyspan_key_table[message.button], 0);
 320                         input_sync(remote->input);
 321                         remote->toggle = message.toggle;
 322                 }
 323
 324                 remote->stage = 0;
 325                 break;
 326         }
 327 }
 328
 329 /*
 330  * Routine for sending all the initialization messages to the remote.
 331  */
 332 static int keyspan_setup(struct usb_device* dev)
 333 {
 334         int retval = 0;
 335
 336         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 337                                  0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
 338         if (retval) {
 339                 dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
 340                         __FUNCTION__, retval);
 341                 return(retval);
 342         }
 343
 344         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 345                                  0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
 346         if (retval) {
 347                 dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
 348                         __FUNCTION__, retval);
 349                 return(retval);
 350         }
 351
 352         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 353                                  0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
 354         if (retval) {
 355                 dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
 356                         __FUNCTION__, retval);
 357                 return(retval);
 358         }
 359
 360         dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__);
 361         return(retval);
 362 }
 363
 364 /*
 365  * Routine used to handle a new message that has come in.
 366  */
 367 static void keyspan_irq_recv(struct urb *urb, struct pt_regs *regs)
 368 {
 369         struct usb_keyspan *dev = urb->context;
 370         int retval;
 371
 372         /* Check our status in case we need to bail out early. */
 373         switch (urb->status) {
 374         case 0:
 375                 break;
 376
 377         /* Device went away so don't keep trying to read from it. */
 378         case -ECONNRESET:
 379         case -ENOENT:
 380         case -ESHUTDOWN:
 381                 return;
 382
 383         default:
 384                 goto resubmit;
 385                 break;
 386         }
 387
 388         if (debug)
 389                 keyspan_print(dev);
 390
 391         keyspan_check_data(dev, regs);
 392
 393 resubmit:
 394         retval = usb_submit_urb(urb, GFP_ATOMIC);
 395         if (retval)
 396                 err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval);
 397 }
 398
 399 static int keyspan_open(struct input_dev *dev)
 400 {
 401         struct usb_keyspan *remote = dev->private;
 402
 403         remote->irq_urb->dev = remote->udev;
 404         if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
 405                 return -EIO;
 406
 407         return 0;
 408 }
 409
 410 static void keyspan_close(struct input_dev *dev)
 411 {
 412         struct usb_keyspan *remote = dev->private;
 413
 414         usb_kill_urb(remote->irq_urb);
 415 }
 416
 417 static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
 418 {
 419
 420         struct usb_endpoint_descriptor *endpoint;
 421         int i;
 422
 423         for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
 424                 endpoint = &iface->endpoint[i].desc;
 425
 426                 if ((endpoint->bEndpointAddress & USB_DIR_IN) &&
 427                     ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
 428                         /* we found our interrupt in endpoint */
 429                         return endpoint;
 430                 }
 431         }
 432
 433         return NULL;
 434 }
 435
 436 /*
 437  * Routine that sets up the driver to handle a specific USB device detected on the bus.
 438  */
 439 static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
 440 {
 441         struct usb_device *udev = interface_to_usbdev(interface);
 442         struct usb_endpoint_descriptor *endpoint;
 443         struct usb_keyspan *remote;
 444         struct input_dev *input_dev;
 445         int i, retval;
 446
 447         endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
 448         if (!endpoint)
 449                 return -ENODEV;
 450
 451         remote = kzalloc(sizeof(*remote), GFP_KERNEL);
 452         input_dev = input_allocate_device();
 453         if (!remote || !input_dev) {
 454                 retval = -ENOMEM;
 455                 goto fail1;
 456         }
 457
 458         remote->udev = udev;
 459         remote->input = input_dev;
 460         remote->interface = interface;
 461         remote->in_endpoint = endpoint;
 462         remote->toggle = -1;    /* Set to -1 so we will always not match the toggle from the first remote message. */
 463
 464         remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);
 465         if (!remote->in_buffer) {
 466                 retval = -ENOMEM;
 467                 goto fail1;
 468         }
 469
 470         remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
 471         if (!remote->irq_urb) {
 472                 retval = -ENOMEM;
 473                 goto fail2;
 474         }
 475
 476         retval = keyspan_setup(udev);
 477         if (retval) {
 478                 retval = -ENODEV;
 479                 goto fail3;
 480         }
 481
 482         if (udev->manufacturer)
 483                 strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
 484
 485         if (udev->product) {
 486                 if (udev->manufacturer)
 487                         strlcat(remote->name, " ", sizeof(remote->name));
 488                 strlcat(remote->name, udev->product, sizeof(remote->name));
 489         }
 490
 491         if (!strlen(remote->name))
 492                 snprintf(remote->name, sizeof(remote->name),
 493                          "USB Keyspan Remote %04x:%04x",
 494                          le16_to_cpu(udev->descriptor.idVendor),
 495                          le16_to_cpu(udev->descriptor.idProduct));
 496
 497         usb_make_path(udev, remote->phys, sizeof(remote->phys));
 498         strlcat(remote->phys, "/input0", sizeof(remote->phys));
 499
 500         input_dev->name = remote->name;
 501         input_dev->phys = remote->phys;
 502         usb_to_input_id(udev, &input_dev->id);
 503         input_dev->cdev.dev = &interface->dev;
 504
 505         input_dev->evbit[0] = BIT(EV_KEY);              /* We will only report KEY events. */
 506         for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
 507                 if (keyspan_key_table[i] != KEY_RESERVED)
 508                         set_bit(keyspan_key_table[i], input_dev->keybit);
 509
 510         input_dev->private = remote;
 511         input_dev->open = keyspan_open;
 512         input_dev->close = keyspan_close;
 513
 514         /*
 515          * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open()
 516          */
 517         usb_fill_int_urb(remote->irq_urb,
 518                          remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress),
 519                          remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
 520                          remote->in_endpoint->bInterval);
 521         remote->irq_urb->transfer_dma = remote->in_dma;
 522         remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 523
 524         /* we can register the device now, as it is ready */
 525         input_register_device(remote->input);
 526
 527         /* save our data pointer in this interface device */
 528         usb_set_intfdata(interface, remote);
 529
 530         return 0;
 531
 532  fail3: usb_free_urb(remote->irq_urb);
 533  fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
 534  fail1: kfree(remote);
 535         input_free_device(input_dev);
 536
 537         return retval;
 538 }
 539
 540 /*
 541  * Routine called when a device is disconnected from the USB.
 542  */
 543 static void keyspan_disconnect(struct usb_interface *interface)
 544 {
 545         struct usb_keyspan *remote;
 546
 547         remote = usb_get_intfdata(interface);
 548         usb_set_intfdata(interface, NULL);
 549
 550         if (remote) {   /* We have a valid driver structure so clean up everything we allocated. */
 551                 input_unregister_device(remote->input);
 552                 usb_kill_urb(remote->irq_urb);
 553                 usb_free_urb(remote->irq_urb);
 554                 usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
 555                 kfree(remote);
 556         }
 557 }
 558
 559 /*
 560  * Standard driver set up sections
 561  */
 562 static struct usb_driver keyspan_driver =
 563 {
 564         .name =         "keyspan_remote",
 565         .probe =        keyspan_probe,
 566         .disconnect =   keyspan_disconnect,
 567         .id_table =     keyspan_table
 568 };
 569
 570 static int __init usb_keyspan_init(void)
 571 {
 572         int result;
 573
 574         /* register this driver with the USB subsystem */
 575         result = usb_register(&keyspan_driver);
 576         if (result)
 577                 err("usb_register failed. Error number %d\n", result);
 578
 579         return result;
 580 }
 581
 582 static void __exit usb_keyspan_exit(void)
 583 {
 584         /* deregister this driver with the USB subsystem */
 585         usb_deregister(&keyspan_driver);
 586 }
 587
 588 module_init(usb_keyspan_init);
 589 module_exit(usb_keyspan_exit);
 590
 591 MODULE_DEVICE_TABLE(usb, keyspan_table);
 592 MODULE_AUTHOR(DRIVER_AUTHOR);
 593 MODULE_DESCRIPTION(DRIVER_DESC);
 594 MODULE_LICENSE(DRIVER_LICENSE);