git.oblomov.eu Git - linux-2.6/blob - drivers/i2c/busses/i2c-omap.c

   1 /*
   2  * TI OMAP I2C master mode driver
   3  *
   4  * Copyright (C) 2003 MontaVista Software, Inc.
   5  * Copyright (C) 2005 Nokia Corporation
   6  * Copyright (C) 2004 - 2007 Texas Instruments.
   7  *
   8  * Originally written by MontaVista Software, Inc.
   9  * Additional contributions by:
  10  *      Tony Lindgren <tony@atomide.com>
  11  *      Imre Deak <imre.deak@nokia.com>
  12  *      Juha Yrjölä <juha.yrjola@solidboot.com>
  13  *      Syed Khasim <x0khasim@ti.com>
  14  *      Nishant Menon <nm@ti.com>
  15  *
  16  * This program is free software; you can redistribute it and/or modify
  17  * it under the terms of the GNU General Public License as published by
  18  * the Free Software Foundation; either version 2 of the License, or
  19  * (at your option) any later version.
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  24  * GNU General Public License for more details.
  25  *
  26  * You should have received a copy of the GNU General Public License
  27  * along with this program; if not, write to the Free Software
  28  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  29  */
  30
  31 #include <linux/module.h>
  32 #include <linux/delay.h>
  33 #include <linux/i2c.h>
  34 #include <linux/err.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/completion.h>
  37 #include <linux/platform_device.h>
  38 #include <linux/clk.h>
  39 #include <linux/io.h>
  40
  41 /* I2C controller revisions */
  42 #define OMAP_I2C_REV_2                  0x20
  43
  44 /* I2C controller revisions present on specific hardware */
  45 #define OMAP_I2C_REV_ON_2430            0x36
  46 #define OMAP_I2C_REV_ON_3430            0x3C
  47
  48 /* timeout waiting for the controller to respond */
  49 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
  50
  51 #define OMAP_I2C_REV_REG                0x00
  52 #define OMAP_I2C_IE_REG                 0x04
  53 #define OMAP_I2C_STAT_REG               0x08
  54 #define OMAP_I2C_IV_REG                 0x0c
  55 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
  56 #define OMAP_I2C_WE_REG                 0x0c
  57 #define OMAP_I2C_SYSS_REG               0x10
  58 #define OMAP_I2C_BUF_REG                0x14
  59 #define OMAP_I2C_CNT_REG                0x18
  60 #define OMAP_I2C_DATA_REG               0x1c
  61 #define OMAP_I2C_SYSC_REG               0x20
  62 #define OMAP_I2C_CON_REG                0x24
  63 #define OMAP_I2C_OA_REG                 0x28
  64 #define OMAP_I2C_SA_REG                 0x2c
  65 #define OMAP_I2C_PSC_REG                0x30
  66 #define OMAP_I2C_SCLL_REG               0x34
  67 #define OMAP_I2C_SCLH_REG               0x38
  68 #define OMAP_I2C_SYSTEST_REG            0x3c
  69 #define OMAP_I2C_BUFSTAT_REG            0x40
  70
  71 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
  72 #define OMAP_I2C_IE_XDR         (1 << 14)       /* TX Buffer drain int enable */
  73 #define OMAP_I2C_IE_RDR         (1 << 13)       /* RX Buffer drain int enable */
  74 #define OMAP_I2C_IE_XRDY        (1 << 4)        /* TX data ready int enable */
  75 #define OMAP_I2C_IE_RRDY        (1 << 3)        /* RX data ready int enable */
  76 #define OMAP_I2C_IE_ARDY        (1 << 2)        /* Access ready int enable */
  77 #define OMAP_I2C_IE_NACK        (1 << 1)        /* No ack interrupt enable */
  78 #define OMAP_I2C_IE_AL          (1 << 0)        /* Arbitration lost int ena */
  79
  80 /* I2C Status Register (OMAP_I2C_STAT): */
  81 #define OMAP_I2C_STAT_XDR       (1 << 14)       /* TX Buffer draining */
  82 #define OMAP_I2C_STAT_RDR       (1 << 13)       /* RX Buffer draining */
  83 #define OMAP_I2C_STAT_BB        (1 << 12)       /* Bus busy */
  84 #define OMAP_I2C_STAT_ROVR      (1 << 11)       /* Receive overrun */
  85 #define OMAP_I2C_STAT_XUDF      (1 << 10)       /* Transmit underflow */
  86 #define OMAP_I2C_STAT_AAS       (1 << 9)        /* Address as slave */
  87 #define OMAP_I2C_STAT_AD0       (1 << 8)        /* Address zero */
  88 #define OMAP_I2C_STAT_XRDY      (1 << 4)        /* Transmit data ready */
  89 #define OMAP_I2C_STAT_RRDY      (1 << 3)        /* Receive data ready */
  90 #define OMAP_I2C_STAT_ARDY      (1 << 2)        /* Register access ready */
  91 #define OMAP_I2C_STAT_NACK      (1 << 1)        /* No ack interrupt enable */
  92 #define OMAP_I2C_STAT_AL        (1 << 0)        /* Arbitration lost int ena */
  93
  94 /* I2C WE wakeup enable register */
  95 #define OMAP_I2C_WE_XDR_WE      (1 << 14)       /* TX drain wakup */
  96 #define OMAP_I2C_WE_RDR_WE      (1 << 13)       /* RX drain wakeup */
  97 #define OMAP_I2C_WE_AAS_WE      (1 << 9)        /* Address as slave wakeup*/
  98 #define OMAP_I2C_WE_BF_WE       (1 << 8)        /* Bus free wakeup */
  99 #define OMAP_I2C_WE_STC_WE      (1 << 6)        /* Start condition wakeup */
 100 #define OMAP_I2C_WE_GC_WE       (1 << 5)        /* General call wakeup */
 101 #define OMAP_I2C_WE_DRDY_WE     (1 << 3)        /* TX/RX data ready wakeup */
 102 #define OMAP_I2C_WE_ARDY_WE     (1 << 2)        /* Reg access ready wakeup */
 103 #define OMAP_I2C_WE_NACK_WE     (1 << 1)        /* No acknowledgment wakeup */
 104 #define OMAP_I2C_WE_AL_WE       (1 << 0)        /* Arbitration lost wakeup */
 105
 106 #define OMAP_I2C_WE_ALL         (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \
 107                                 OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \
 108                                 OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \
 109                                 OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \
 110                                 OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE)
 111
 112 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
 113 #define OMAP_I2C_BUF_RDMA_EN    (1 << 15)       /* RX DMA channel enable */
 114 #define OMAP_I2C_BUF_RXFIF_CLR  (1 << 14)       /* RX FIFO Clear */
 115 #define OMAP_I2C_BUF_XDMA_EN    (1 << 7)        /* TX DMA channel enable */
 116 #define OMAP_I2C_BUF_TXFIF_CLR  (1 << 6)        /* TX FIFO Clear */
 117
 118 /* I2C Configuration Register (OMAP_I2C_CON): */
 119 #define OMAP_I2C_CON_EN         (1 << 15)       /* I2C module enable */
 120 #define OMAP_I2C_CON_BE         (1 << 14)       /* Big endian mode */
 121 #define OMAP_I2C_CON_OPMODE_HS  (1 << 12)       /* High Speed support */
 122 #define OMAP_I2C_CON_STB        (1 << 11)       /* Start byte mode (master) */
 123 #define OMAP_I2C_CON_MST        (1 << 10)       /* Master/slave mode */
 124 #define OMAP_I2C_CON_TRX        (1 << 9)        /* TX/RX mode (master only) */
 125 #define OMAP_I2C_CON_XA         (1 << 8)        /* Expand address */
 126 #define OMAP_I2C_CON_RM         (1 << 2)        /* Repeat mode (master only) */
 127 #define OMAP_I2C_CON_STP        (1 << 1)        /* Stop cond (master only) */
 128 #define OMAP_I2C_CON_STT        (1 << 0)        /* Start condition (master) */
 129
 130 /* I2C SCL time value when Master */
 131 #define OMAP_I2C_SCLL_HSSCLL    8
 132 #define OMAP_I2C_SCLH_HSSCLH    8
 133
 134 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
 135 #ifdef DEBUG
 136 #define OMAP_I2C_SYSTEST_ST_EN          (1 << 15)       /* System test enable */
 137 #define OMAP_I2C_SYSTEST_FREE           (1 << 14)       /* Free running mode */
 138 #define OMAP_I2C_SYSTEST_TMODE_MASK     (3 << 12)       /* Test mode select */
 139 #define OMAP_I2C_SYSTEST_TMODE_SHIFT    (12)            /* Test mode select */
 140 #define OMAP_I2C_SYSTEST_SCL_I          (1 << 3)        /* SCL line sense in */
 141 #define OMAP_I2C_SYSTEST_SCL_O          (1 << 2)        /* SCL line drive out */
 142 #define OMAP_I2C_SYSTEST_SDA_I          (1 << 1)        /* SDA line sense in */
 143 #define OMAP_I2C_SYSTEST_SDA_O          (1 << 0)        /* SDA line drive out */
 144 #endif
 145
 146 /* OCP_SYSSTATUS bit definitions */
 147 #define SYSS_RESETDONE_MASK             (1 << 0)
 148
 149 /* OCP_SYSCONFIG bit definitions */
 150 #define SYSC_CLOCKACTIVITY_MASK         (0x3 << 8)
 151 #define SYSC_SIDLEMODE_MASK             (0x3 << 3)
 152 #define SYSC_ENAWAKEUP_MASK             (1 << 2)
 153 #define SYSC_SOFTRESET_MASK             (1 << 1)
 154 #define SYSC_AUTOIDLE_MASK              (1 << 0)
 155
 156 #define SYSC_IDLEMODE_SMART             0x2
 157 #define SYSC_CLOCKACTIVITY_FCLK         0x2
 158
 159
 160 struct omap_i2c_dev {
 161         struct device           *dev;
 162         void __iomem            *base;          /* virtual */
 163         int                     irq;
 164         struct clk              *iclk;          /* Interface clock */
 165         struct clk              *fclk;          /* Functional clock */
 166         struct completion       cmd_complete;
 167         struct resource         *ioarea;
 168         u32                     speed;          /* Speed of bus in Khz */
 169         u16                     cmd_err;
 170         u8                      *buf;
 171         size_t                  buf_len;
 172         struct i2c_adapter      adapter;
 173         u8                      fifo_size;      /* use as flag and value
 174                                                  * fifo_size==0 implies no fifo
 175                                                  * if set, should be trsh+1
 176                                                  */
 177         u8                      rev;
 178         unsigned                b_hw:1;         /* bad h/w fixes */
 179         unsigned                idle:1;
 180         u16                     iestate;        /* Saved interrupt register */
 181 };
 182
 183 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 184                                       int reg, u16 val)
 185 {
 186         __raw_writew(val, i2c_dev->base + reg);
 187 }
 188
 189 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 190 {
 191         return __raw_readw(i2c_dev->base + reg);
 192 }
 193
 194 static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 195 {
 196         int ret;
 197
 198         dev->iclk = clk_get(dev->dev, "ick");
 199         if (IS_ERR(dev->iclk)) {
 200                 ret = PTR_ERR(dev->iclk);
 201                 dev->iclk = NULL;
 202                 return ret;
 203         }
 204
 205         dev->fclk = clk_get(dev->dev, "fck");
 206         if (IS_ERR(dev->fclk)) {
 207                 ret = PTR_ERR(dev->fclk);
 208                 if (dev->iclk != NULL) {
 209                         clk_put(dev->iclk);
 210                         dev->iclk = NULL;
 211                 }
 212                 dev->fclk = NULL;
 213                 return ret;
 214         }
 215
 216         return 0;
 217 }
 218
 219 static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
 220 {
 221         clk_put(dev->fclk);
 222         dev->fclk = NULL;
 223         clk_put(dev->iclk);
 224         dev->iclk = NULL;
 225 }
 226
 227 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 228 {
 229         WARN_ON(!dev->idle);
 230
 231         clk_enable(dev->iclk);
 232         clk_enable(dev->fclk);
 233         dev->idle = 0;
 234         if (dev->iestate)
 235                 omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
 236 }
 237
 238 static void omap_i2c_idle(struct omap_i2c_dev *dev)
 239 {
 240         u16 iv;
 241
 242         WARN_ON(dev->idle);
 243
 244         dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 245         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
 246         if (dev->rev < OMAP_I2C_REV_2) {
 247                 iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
 248         } else {
 249                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
 250
 251                 /* Flush posted write before the dev->idle store occurs */
 252                 omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
 253         }
 254         dev->idle = 1;
 255         clk_disable(dev->fclk);
 256         clk_disable(dev->iclk);
 257 }
 258
 259 static int omap_i2c_init(struct omap_i2c_dev *dev)
 260 {
 261         u16 psc = 0, scll = 0, sclh = 0;
 262         u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
 263         unsigned long fclk_rate = 12000000;
 264         unsigned long timeout;
 265         unsigned long internal_clk = 0;
 266
 267         if (dev->rev >= OMAP_I2C_REV_2) {
 268                 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
 269                 /* For some reason we need to set the EN bit before the
 270                  * reset done bit gets set. */
 271                 timeout = jiffies + OMAP_I2C_TIMEOUT;
 272                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 273                 while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
 274                          SYSS_RESETDONE_MASK)) {
 275                         if (time_after(jiffies, timeout)) {
 276                                 dev_warn(dev->dev, "timeout waiting "
 277                                                 "for controller reset\n");
 278                                 return -ETIMEDOUT;
 279                         }
 280                         msleep(1);
 281                 }
 282
 283                 /* SYSC register is cleared by the reset; rewrite it */
 284                 if (dev->rev == OMAP_I2C_REV_ON_2430) {
 285
 286                         omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
 287                                            SYSC_AUTOIDLE_MASK);
 288
 289                 } else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
 290                         u32 v;
 291
 292                         v = SYSC_AUTOIDLE_MASK;
 293                         v |= SYSC_ENAWAKEUP_MASK;
 294                         v |= (SYSC_IDLEMODE_SMART <<
 295                               __ffs(SYSC_SIDLEMODE_MASK));
 296                         v |= (SYSC_CLOCKACTIVITY_FCLK <<
 297                               __ffs(SYSC_CLOCKACTIVITY_MASK));
 298
 299                         omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, v);
 300                         /*
 301                          * Enabling all wakup sources to stop I2C freezing on
 302                          * WFI instruction.
 303                          * REVISIT: Some wkup sources might not be needed.
 304                          */
 305                         omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
 306                                                         OMAP_I2C_WE_ALL);
 307
 308                 }
 309         }
 310         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 311
 312         if (cpu_class_is_omap1()) {
 313                 /*
 314                  * The I2C functional clock is the armxor_ck, so there's
 315                  * no need to get "armxor_ck" separately.  Now, if OMAP2420
 316                  * always returns 12MHz for the functional clock, we can
 317                  * do this bit unconditionally.
 318                  */
 319                 fclk_rate = clk_get_rate(dev->fclk);
 320
 321                 /* TRM for 5912 says the I2C clock must be prescaled to be
 322                  * between 7 - 12 MHz. The XOR input clock is typically
 323                  * 12, 13 or 19.2 MHz. So we should have code that produces:
 324                  *
 325                  * XOR MHz      Divider         Prescaler
 326                  * 12           1               0
 327                  * 13           2               1
 328                  * 19.2         2               1
 329                  */
 330                 if (fclk_rate > 12000000)
 331                         psc = fclk_rate / 12000000;
 332         }
 333
 334         if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 335
 336                 /*
 337                  * HSI2C controller internal clk rate should be 19.2 Mhz for
 338                  * HS and for all modes on 2430. On 34xx we can use lower rate
 339                  * to get longer filter period for better noise suppression.
 340                  * The filter is iclk (fclk for HS) period.
 341                  */
 342                 if (dev->speed > 400 || cpu_is_omap2430())
 343                         internal_clk = 19200;
 344                 else if (dev->speed > 100)
 345                         internal_clk = 9600;
 346                 else
 347                         internal_clk = 4000;
 348                 fclk_rate = clk_get_rate(dev->fclk) / 1000;
 349
 350                 /* Compute prescaler divisor */
 351                 psc = fclk_rate / internal_clk;
 352                 psc = psc - 1;
 353
 354                 /* If configured for High Speed */
 355                 if (dev->speed > 400) {
 356                         unsigned long scl;
 357
 358                         /* For first phase of HS mode */
 359                         scl = internal_clk / 400;
 360                         fsscll = scl - (scl / 3) - 7;
 361                         fssclh = (scl / 3) - 5;
 362
 363                         /* For second phase of HS mode */
 364                         scl = fclk_rate / dev->speed;
 365                         hsscll = scl - (scl / 3) - 7;
 366                         hssclh = (scl / 3) - 5;
 367                 } else if (dev->speed > 100) {
 368                         unsigned long scl;
 369
 370                         /* Fast mode */
 371                         scl = internal_clk / dev->speed;
 372                         fsscll = scl - (scl / 3) - 7;
 373                         fssclh = (scl / 3) - 5;
 374                 } else {
 375                         /* Standard mode */
 376                         fsscll = internal_clk / (dev->speed * 2) - 7;
 377                         fssclh = internal_clk / (dev->speed * 2) - 5;
 378                 }
 379                 scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
 380                 sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
 381         } else {
 382                 /* Program desired operating rate */
 383                 fclk_rate /= (psc + 1) * 1000;
 384                 if (psc > 2)
 385                         psc = 2;
 386                 scll = fclk_rate / (dev->speed * 2) - 7 + psc;
 387                 sclh = fclk_rate / (dev->speed * 2) - 7 + psc;
 388         }
 389
 390         /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
 391         omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
 392
 393         /* SCL low and high time values */
 394         omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
 395         omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
 396
 397         if (dev->fifo_size)
 398                 /* Note: setup required fifo size - 1 */
 399                 omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG,
 400                                         (dev->fifo_size - 1) << 8 | /* RTRSH */
 401                                         OMAP_I2C_BUF_RXFIF_CLR |
 402                                         (dev->fifo_size - 1) | /* XTRSH */
 403                                         OMAP_I2C_BUF_TXFIF_CLR);
 404
 405         /* Take the I2C module out of reset: */
 406         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 407
 408         /* Enable interrupts */
 409         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
 410                         (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
 411                         OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
 412                         OMAP_I2C_IE_AL)  | ((dev->fifo_size) ?
 413                                 (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0));
 414         return 0;
 415 }
 416
 417 /*
 418  * Waiting on Bus Busy
 419  */
 420 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
 421 {
 422         unsigned long timeout;
 423
 424         timeout = jiffies + OMAP_I2C_TIMEOUT;
 425         while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
 426                 if (time_after(jiffies, timeout)) {
 427                         dev_warn(dev->dev, "timeout waiting for bus ready\n");
 428                         return -ETIMEDOUT;
 429                 }
 430                 msleep(1);
 431         }
 432
 433         return 0;
 434 }
 435
 436 /*
 437  * Low level master read/write transaction.
 438  */
 439 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 440                              struct i2c_msg *msg, int stop)
 441 {
 442         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
 443         int r;
 444         u16 w;
 445
 446         dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
 447                 msg->addr, msg->len, msg->flags, stop);
 448
 449         if (msg->len == 0)
 450                 return -EINVAL;
 451
 452         omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr);
 453
 454         /* REVISIT: Could the STB bit of I2C_CON be used with probing? */
 455         dev->buf = msg->buf;
 456         dev->buf_len = msg->len;
 457
 458         omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
 459
 460         /* Clear the FIFO Buffers */
 461         w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG);
 462         w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
 463         omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w);
 464
 465         init_completion(&dev->cmd_complete);
 466         dev->cmd_err = 0;
 467
 468         w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
 469
 470         /* High speed configuration */
 471         if (dev->speed > 400)
 472                 w |= OMAP_I2C_CON_OPMODE_HS;
 473
 474         if (msg->flags & I2C_M_TEN)
 475                 w |= OMAP_I2C_CON_XA;
 476         if (!(msg->flags & I2C_M_RD))
 477                 w |= OMAP_I2C_CON_TRX;
 478
 479         if (!dev->b_hw && stop)
 480                 w |= OMAP_I2C_CON_STP;
 481
 482         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 483
 484         /*
 485          * Don't write stt and stp together on some hardware.
 486          */
 487         if (dev->b_hw && stop) {
 488                 unsigned long delay = jiffies + OMAP_I2C_TIMEOUT;
 489                 u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 490                 while (con & OMAP_I2C_CON_STT) {
 491                         con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 492
 493                         /* Let the user know if i2c is in a bad state */
 494                         if (time_after(jiffies, delay)) {
 495                                 dev_err(dev->dev, "controller timed out "
 496                                 "waiting for start condition to finish\n");
 497                                 return -ETIMEDOUT;
 498                         }
 499                         cpu_relax();
 500                 }
 501
 502                 w |= OMAP_I2C_CON_STP;
 503                 w &= ~OMAP_I2C_CON_STT;
 504                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 505         }
 506
 507         /*
 508          * REVISIT: We should abort the transfer on signals, but the bus goes
 509          * into arbitration and we're currently unable to recover from it.
 510          */
 511         r = wait_for_completion_timeout(&dev->cmd_complete,
 512                                         OMAP_I2C_TIMEOUT);
 513         dev->buf_len = 0;
 514         if (r < 0)
 515                 return r;
 516         if (r == 0) {
 517                 dev_err(dev->dev, "controller timed out\n");
 518                 omap_i2c_init(dev);
 519                 return -ETIMEDOUT;
 520         }
 521
 522         if (likely(!dev->cmd_err))
 523                 return 0;
 524
 525         /* We have an error */
 526         if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
 527                             OMAP_I2C_STAT_XUDF)) {
 528                 omap_i2c_init(dev);
 529                 return -EIO;
 530         }
 531
 532         if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
 533                 if (msg->flags & I2C_M_IGNORE_NAK)
 534                         return 0;
 535                 if (stop) {
 536                         w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 537                         w |= OMAP_I2C_CON_STP;
 538                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 539                 }
 540                 return -EREMOTEIO;
 541         }
 542         return -EIO;
 543 }
 544
 545
 546 /*
 547  * Prepare controller for a transaction and call omap_i2c_xfer_msg
 548  * to do the work during IRQ processing.
 549  */
 550 static int
 551 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 552 {
 553         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
 554         int i;
 555         int r;
 556
 557         omap_i2c_unidle(dev);
 558
 559         r = omap_i2c_wait_for_bb(dev);
 560         if (r < 0)
 561                 goto out;
 562
 563         for (i = 0; i < num; i++) {
 564                 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
 565                 if (r != 0)
 566                         break;
 567         }
 568
 569         if (r == 0)
 570                 r = num;
 571 out:
 572         omap_i2c_idle(dev);
 573         return r;
 574 }
 575
 576 static u32
 577 omap_i2c_func(struct i2c_adapter *adap)
 578 {
 579         return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
 580 }
 581
 582 static inline void
 583 omap_i2c_complete_cmd(struct omap_i2c_dev *dev, u16 err)
 584 {
 585         dev->cmd_err |= err;
 586         complete(&dev->cmd_complete);
 587 }
 588
 589 static inline void
 590 omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
 591 {
 592         omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 593 }
 594
 595 /* rev1 devices are apparently only on some 15xx */
 596 #ifdef CONFIG_ARCH_OMAP15XX
 597
 598 static irqreturn_t
 599 omap_i2c_rev1_isr(int this_irq, void *dev_id)
 600 {
 601         struct omap_i2c_dev *dev = dev_id;
 602         u16 iv, w;
 603
 604         if (dev->idle)
 605                 return IRQ_NONE;
 606
 607         iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
 608         switch (iv) {
 609         case 0x00:      /* None */
 610                 break;
 611         case 0x01:      /* Arbitration lost */
 612                 dev_err(dev->dev, "Arbitration lost\n");
 613                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
 614                 break;
 615         case 0x02:      /* No acknowledgement */
 616                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
 617                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
 618                 break;
 619         case 0x03:      /* Register access ready */
 620                 omap_i2c_complete_cmd(dev, 0);
 621                 break;
 622         case 0x04:      /* Receive data ready */
 623                 if (dev->buf_len) {
 624                         w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 625                         *dev->buf++ = w;
 626                         dev->buf_len--;
 627                         if (dev->buf_len) {
 628                                 *dev->buf++ = w >> 8;
 629                                 dev->buf_len--;
 630                         }
 631                 } else
 632                         dev_err(dev->dev, "RRDY IRQ while no data requested\n");
 633                 break;
 634         case 0x05:      /* Transmit data ready */
 635                 if (dev->buf_len) {
 636                         w = *dev->buf++;
 637                         dev->buf_len--;
 638                         if (dev->buf_len) {
 639                                 w |= *dev->buf++ << 8;
 640                                 dev->buf_len--;
 641                         }
 642                         omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 643                 } else
 644                         dev_err(dev->dev, "XRDY IRQ while no data to send\n");
 645                 break;
 646         default:
 647                 return IRQ_NONE;
 648         }
 649
 650         return IRQ_HANDLED;
 651 }
 652 #else
 653 #define omap_i2c_rev1_isr               NULL
 654 #endif
 655
 656 static irqreturn_t
 657 omap_i2c_isr(int this_irq, void *dev_id)
 658 {
 659         struct omap_i2c_dev *dev = dev_id;
 660         u16 bits;
 661         u16 stat, w;
 662         int err, count = 0;
 663
 664         if (dev->idle)
 665                 return IRQ_NONE;
 666
 667         bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 668         while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
 669                 dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
 670                 if (count++ == 100) {
 671                         dev_warn(dev->dev, "Too much work in one IRQ\n");
 672                         break;
 673                 }
 674
 675                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 676
 677                 err = 0;
 678                 if (stat & OMAP_I2C_STAT_NACK) {
 679                         err |= OMAP_I2C_STAT_NACK;
 680                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
 681                                            OMAP_I2C_CON_STP);
 682                 }
 683                 if (stat & OMAP_I2C_STAT_AL) {
 684                         dev_err(dev->dev, "Arbitration lost\n");
 685                         err |= OMAP_I2C_STAT_AL;
 686                 }
 687                 if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
 688                                         OMAP_I2C_STAT_AL))
 689                         omap_i2c_complete_cmd(dev, err);
 690                 if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
 691                         u8 num_bytes = 1;
 692                         if (dev->fifo_size) {
 693                                 if (stat & OMAP_I2C_STAT_RRDY)
 694                                         num_bytes = dev->fifo_size;
 695                                 else
 696                                         num_bytes = omap_i2c_read_reg(dev,
 697                                                         OMAP_I2C_BUFSTAT_REG);
 698                         }
 699                         while (num_bytes) {
 700                                 num_bytes--;
 701                                 w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 702                                 if (dev->buf_len) {
 703                                         *dev->buf++ = w;
 704                                         dev->buf_len--;
 705                                         /* Data reg from 2430 is 8 bit wide */
 706                                         if (!cpu_is_omap2430() &&
 707                                                         !cpu_is_omap34xx()) {
 708                                                 if (dev->buf_len) {
 709                                                         *dev->buf++ = w >> 8;
 710                                                         dev->buf_len--;
 711                                                 }
 712                                         }
 713                                 } else {
 714                                         if (stat & OMAP_I2C_STAT_RRDY)
 715                                                 dev_err(dev->dev,
 716                                                         "RRDY IRQ while no data"
 717                                                                 " requested\n");
 718                                         if (stat & OMAP_I2C_STAT_RDR)
 719                                                 dev_err(dev->dev,
 720                                                         "RDR IRQ while no data"
 721                                                                 " requested\n");
 722                                         break;
 723                                 }
 724                         }
 725                         omap_i2c_ack_stat(dev,
 726                                 stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
 727                         continue;
 728                 }
 729                 if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) {
 730                         u8 num_bytes = 1;
 731                         if (dev->fifo_size) {
 732                                 if (stat & OMAP_I2C_STAT_XRDY)
 733                                         num_bytes = dev->fifo_size;
 734                                 else
 735                                         num_bytes = omap_i2c_read_reg(dev,
 736                                                         OMAP_I2C_BUFSTAT_REG);
 737                         }
 738                         while (num_bytes) {
 739                                 num_bytes--;
 740                                 w = 0;
 741                                 if (dev->buf_len) {
 742                                         w = *dev->buf++;
 743                                         dev->buf_len--;
 744                                         /* Data reg from  2430 is 8 bit wide */
 745                                         if (!cpu_is_omap2430() &&
 746                                                         !cpu_is_omap34xx()) {
 747                                                 if (dev->buf_len) {
 748                                                         w |= *dev->buf++ << 8;
 749                                                         dev->buf_len--;
 750                                                 }
 751                                         }
 752                                 } else {
 753                                         if (stat & OMAP_I2C_STAT_XRDY)
 754                                                 dev_err(dev->dev,
 755                                                         "XRDY IRQ while no "
 756                                                         "data to send\n");
 757                                         if (stat & OMAP_I2C_STAT_XDR)
 758                                                 dev_err(dev->dev,
 759                                                         "XDR IRQ while no "
 760                                                         "data to send\n");
 761                                         break;
 762                                 }
 763                                 omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 764                         }
 765                         omap_i2c_ack_stat(dev,
 766                                 stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
 767                         continue;
 768                 }
 769                 if (stat & OMAP_I2C_STAT_ROVR) {
 770                         dev_err(dev->dev, "Receive overrun\n");
 771                         dev->cmd_err |= OMAP_I2C_STAT_ROVR;
 772                 }
 773                 if (stat & OMAP_I2C_STAT_XUDF) {
 774                         dev_err(dev->dev, "Transmit underflow\n");
 775                         dev->cmd_err |= OMAP_I2C_STAT_XUDF;
 776                 }
 777         }
 778
 779         return count ? IRQ_HANDLED : IRQ_NONE;
 780 }
 781
 782 static const struct i2c_algorithm omap_i2c_algo = {
 783         .master_xfer    = omap_i2c_xfer,
 784         .functionality  = omap_i2c_func,
 785 };
 786
 787 static int __init
 788 omap_i2c_probe(struct platform_device *pdev)
 789 {
 790         struct omap_i2c_dev     *dev;
 791         struct i2c_adapter      *adap;
 792         struct resource         *mem, *irq, *ioarea;
 793         irq_handler_t isr;
 794         int r;
 795         u32 speed = 0;
 796
 797         /* NOTE: driver uses the static register mapping */
 798         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 799         if (!mem) {
 800                 dev_err(&pdev->dev, "no mem resource?\n");
 801                 return -ENODEV;
 802         }
 803         irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 804         if (!irq) {
 805                 dev_err(&pdev->dev, "no irq resource?\n");
 806                 return -ENODEV;
 807         }
 808
 809         ioarea = request_mem_region(mem->start, resource_size(mem),
 810                         pdev->name);
 811         if (!ioarea) {
 812                 dev_err(&pdev->dev, "I2C region already claimed\n");
 813                 return -EBUSY;
 814         }
 815
 816         dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
 817         if (!dev) {
 818                 r = -ENOMEM;
 819                 goto err_release_region;
 820         }
 821
 822         if (pdev->dev.platform_data != NULL)
 823                 speed = *(u32 *)pdev->dev.platform_data;
 824         else
 825                 speed = 100;    /* Defualt speed */
 826
 827         dev->speed = speed;
 828         dev->idle = 1;
 829         dev->dev = &pdev->dev;
 830         dev->irq = irq->start;
 831         dev->base = ioremap(mem->start, resource_size(mem));
 832         if (!dev->base) {
 833                 r = -ENOMEM;
 834                 goto err_free_mem;
 835         }
 836
 837         platform_set_drvdata(pdev, dev);
 838
 839         if ((r = omap_i2c_get_clocks(dev)) != 0)
 840                 goto err_iounmap;
 841
 842         omap_i2c_unidle(dev);
 843
 844         dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 845
 846         if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 847                 u16 s;
 848
 849                 /* Set up the fifo size - Get total size */
 850                 s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3;
 851                 dev->fifo_size = 0x8 << s;
 852
 853                 /*
 854                  * Set up notification threshold as half the total available
 855                  * size. This is to ensure that we can handle the status on int
 856                  * call back latencies.
 857                  */
 858                 dev->fifo_size = (dev->fifo_size / 2);
 859                 dev->b_hw = 1; /* Enable hardware fixes */
 860         }
 861
 862         /* reset ASAP, clearing any IRQs */
 863         omap_i2c_init(dev);
 864
 865         isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr;
 866         r = request_irq(dev->irq, isr, 0, pdev->name, dev);
 867
 868         if (r) {
 869                 dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
 870                 goto err_unuse_clocks;
 871         }
 872
 873         dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
 874                  pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed);
 875
 876         omap_i2c_idle(dev);
 877
 878         adap = &dev->adapter;
 879         i2c_set_adapdata(adap, dev);
 880         adap->owner = THIS_MODULE;
 881         adap->class = I2C_CLASS_HWMON;
 882         strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
 883         adap->algo = &omap_i2c_algo;
 884         adap->dev.parent = &pdev->dev;
 885
 886         /* i2c device drivers may be active on return from add_adapter() */
 887         adap->nr = pdev->id;
 888         r = i2c_add_numbered_adapter(adap);
 889         if (r) {
 890                 dev_err(dev->dev, "failure adding adapter\n");
 891                 goto err_free_irq;
 892         }
 893
 894         return 0;
 895
 896 err_free_irq:
 897         free_irq(dev->irq, dev);
 898 err_unuse_clocks:
 899         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 900         omap_i2c_idle(dev);
 901         omap_i2c_put_clocks(dev);
 902 err_iounmap:
 903         iounmap(dev->base);
 904 err_free_mem:
 905         platform_set_drvdata(pdev, NULL);
 906         kfree(dev);
 907 err_release_region:
 908         release_mem_region(mem->start, resource_size(mem));
 909
 910         return r;
 911 }
 912
 913 static int
 914 omap_i2c_remove(struct platform_device *pdev)
 915 {
 916         struct omap_i2c_dev     *dev = platform_get_drvdata(pdev);
 917         struct resource         *mem;
 918
 919         platform_set_drvdata(pdev, NULL);
 920
 921         free_irq(dev->irq, dev);
 922         i2c_del_adapter(&dev->adapter);
 923         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 924         omap_i2c_put_clocks(dev);
 925         iounmap(dev->base);
 926         kfree(dev);
 927         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 928         release_mem_region(mem->start, resource_size(mem));
 929         return 0;
 930 }
 931
 932 static struct platform_driver omap_i2c_driver = {
 933         .probe          = omap_i2c_probe,
 934         .remove         = omap_i2c_remove,
 935         .driver         = {
 936                 .name   = "i2c_omap",
 937                 .owner  = THIS_MODULE,
 938         },
 939 };
 940
 941 /* I2C may be needed to bring up other drivers */
 942 static int __init
 943 omap_i2c_init_driver(void)
 944 {
 945         return platform_driver_register(&omap_i2c_driver);
 946 }
 947 subsys_initcall(omap_i2c_init_driver);
 948
 949 static void __exit omap_i2c_exit_driver(void)
 950 {
 951         platform_driver_unregister(&omap_i2c_driver);
 952 }
 953 module_exit(omap_i2c_exit_driver);
 954
 955 MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
 956 MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
 957 MODULE_LICENSE("GPL");
 958 MODULE_ALIAS("platform:i2c_omap");