2 * System Abstraction Layer (SAL) interface routines.
4 * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
5 * David Mosberger-Tang <davidm@hpl.hp.com>
6 * Copyright (C) 1999 VA Linux Systems
7 * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/module.h>
13 #include <linux/spinlock.h>
14 #include <linux/string.h>
16 #include <asm/delay.h>
21 __cacheline_aligned DEFINE_SPINLOCK(sal_lock);
22 unsigned long sal_platform_features;
24 unsigned short sal_revision;
25 unsigned short sal_version;
27 #define SAL_MAJOR(x) ((x) >> 8)
28 #define SAL_MINOR(x) ((x) & 0xff)
31 void *addr; /* function entry point */
32 void *gpval; /* gp value to use */
36 default_handler (void)
41 ia64_sal_handler ia64_sal = (ia64_sal_handler) default_handler;
42 ia64_sal_desc_ptc_t *ia64_ptc_domain_info;
45 ia64_sal_strerror (long status)
49 case 0: str = "Call completed without error"; break;
50 case 1: str = "Effect a warm boot of the system to complete "
52 case -1: str = "Not implemented"; break;
53 case -2: str = "Invalid argument"; break;
54 case -3: str = "Call completed with error"; break;
55 case -4: str = "Virtual address not registered"; break;
56 case -5: str = "No information available"; break;
57 case -6: str = "Insufficient space to add the entry"; break;
58 case -7: str = "Invalid entry_addr value"; break;
59 case -8: str = "Invalid interrupt vector"; break;
60 case -9: str = "Requested memory not available"; break;
61 case -10: str = "Unable to write to the NVM device"; break;
62 case -11: str = "Invalid partition type specified"; break;
63 case -12: str = "Invalid NVM_Object id specified"; break;
64 case -13: str = "NVM_Object already has the maximum number "
65 "of partitions"; break;
66 case -14: str = "Insufficient space in partition for the "
67 "requested write sub-function"; break;
68 case -15: str = "Insufficient data buffer space for the "
69 "requested read record sub-function"; break;
70 case -16: str = "Scratch buffer required for the write/delete "
71 "sub-function"; break;
72 case -17: str = "Insufficient space in the NVM_Object for the "
73 "requested create sub-function"; break;
74 case -18: str = "Invalid value specified in the partition_rec "
76 case -19: str = "Record oriented I/O not supported for this "
78 case -20: str = "Bad format of record to be written or "
79 "required keyword variable not "
81 default: str = "Unknown SAL status code"; break;
87 ia64_sal_handler_init (void *entry_point, void *gpval)
89 /* fill in the SAL procedure descriptor and point ia64_sal to it: */
90 pdesc.addr = entry_point;
92 ia64_sal = (ia64_sal_handler) &pdesc;
96 check_versions (struct ia64_sal_systab *systab)
98 sal_revision = (systab->sal_rev_major << 8) | systab->sal_rev_minor;
99 sal_version = (systab->sal_b_rev_major << 8) | systab->sal_b_rev_minor;
101 /* Check for broken firmware */
102 if ((sal_revision == SAL_VERSION_CODE(49, 29))
103 && (sal_version == SAL_VERSION_CODE(49, 29)))
106 * Old firmware for zx2000 prototypes have this weird version number,
107 * reset it to something sane.
109 sal_revision = SAL_VERSION_CODE(2, 8);
110 sal_version = SAL_VERSION_CODE(0, 0);
115 sal_desc_entry_point (void *p)
117 struct ia64_sal_desc_entry_point *ep = p;
118 ia64_pal_handler_init(__va(ep->pal_proc));
119 ia64_sal_handler_init(__va(ep->sal_proc), __va(ep->gp));
124 set_smp_redirect (int flag)
126 #ifndef CONFIG_HOTPLUG_CPU
128 smp_int_redirect &= ~flag;
130 smp_int_redirect |= flag;
133 * For CPU Hotplug we dont want to do any chipset supported
134 * interrupt redirection. The reason is this would require that
135 * All interrupts be stopped and hard bind the irq to a cpu.
136 * Later when the interrupt is fired we need to set the redir hint
137 * on again in the vector. This is cumbersome for something that the
138 * user mode irq balancer will solve anyways.
141 smp_int_redirect &= ~flag;
145 #define set_smp_redirect(flag) do { } while (0)
149 sal_desc_platform_feature (void *p)
151 struct ia64_sal_desc_platform_feature *pf = p;
152 sal_platform_features = pf->feature_mask;
154 printk(KERN_INFO "SAL Platform features:");
155 if (!sal_platform_features) {
160 if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_BUS_LOCK)
162 if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT) {
163 printk(" IRQ_Redirection");
164 set_smp_redirect(SMP_IRQ_REDIRECTION);
166 if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT) {
167 printk(" IPI_Redirection");
168 set_smp_redirect(SMP_IPI_REDIRECTION);
170 if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)
171 printk(" ITC_Drift");
177 sal_desc_ap_wakeup (void *p)
179 struct ia64_sal_desc_ap_wakeup *ap = p;
181 switch (ap->mechanism) {
182 case IA64_SAL_AP_EXTERNAL_INT:
183 ap_wakeup_vector = ap->vector;
184 printk(KERN_INFO "SAL: AP wakeup using external interrupt "
185 "vector 0x%lx\n", ap_wakeup_vector);
188 printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n");
194 chk_nointroute_opt(void)
198 for (cp = boot_command_line; *cp; ) {
199 if (memcmp(cp, "nointroute", 10) == 0) {
201 printk ("no_int_routing on\n");
204 while (*cp != ' ' && *cp)
213 static void __init sal_desc_ap_wakeup(void *p) { }
217 * HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading
218 * cr.ivr, but it never writes cr.eoi. This leaves any interrupt marked as
219 * "in-service" and masks other interrupts of equal or lower priority.
221 * HP internal defect reports: F1859, F2775, F3031.
223 static int sal_cache_flush_drops_interrupts;
226 check_sal_cache_flush (void)
230 u64 vector, cache_type = 3;
231 struct ia64_sal_retval isrv;
234 local_irq_save(flags);
237 * Schedule a timer interrupt, wait until it's reported, and see if
238 * SAL_CACHE_FLUSH drops it.
240 ia64_set_itv(IA64_TIMER_VECTOR);
241 ia64_set_itm(ia64_get_itc() + 1000);
243 while (!ia64_get_irr(IA64_TIMER_VECTOR))
246 SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
249 printk(KERN_ERR "SAL_CAL_FLUSH failed with %ld\n", isrv.status);
251 if (ia64_get_irr(IA64_TIMER_VECTOR)) {
252 vector = ia64_get_ivr();
254 WARN_ON(vector != IA64_TIMER_VECTOR);
256 sal_cache_flush_drops_interrupts = 1;
257 printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; "
258 "PAL_CACHE_FLUSH will be used instead\n");
262 local_irq_restore(flags);
267 ia64_sal_cache_flush (u64 cache_type)
269 struct ia64_sal_retval isrv;
271 if (sal_cache_flush_drops_interrupts) {
277 local_irq_save(flags);
278 rc = ia64_pal_cache_flush(cache_type,
279 PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL);
280 local_irq_restore(flags);
284 SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
287 EXPORT_SYMBOL_GPL(ia64_sal_cache_flush);
290 ia64_sal_init (struct ia64_sal_systab *systab)
296 printk(KERN_WARNING "Hmm, no SAL System Table.\n");
300 if (strncmp(systab->signature, "SST_", 4) != 0)
301 printk(KERN_ERR "bad signature in system table!");
303 check_versions(systab);
305 chk_nointroute_opt();
308 /* revisions are coded in BCD, so %x does the job for us */
309 printk(KERN_INFO "SAL %x.%x: %.32s %.32s%sversion %x.%x\n",
310 SAL_MAJOR(sal_revision), SAL_MINOR(sal_revision),
311 systab->oem_id, systab->product_id,
312 systab->product_id[0] ? " " : "",
313 SAL_MAJOR(sal_version), SAL_MINOR(sal_version));
315 p = (char *) (systab + 1);
316 for (i = 0; i < systab->entry_count; i++) {
318 * The first byte of each entry type contains the type
322 case SAL_DESC_ENTRY_POINT:
323 sal_desc_entry_point(p);
325 case SAL_DESC_PLATFORM_FEATURE:
326 sal_desc_platform_feature(p);
329 ia64_ptc_domain_info = (ia64_sal_desc_ptc_t *)p;
331 case SAL_DESC_AP_WAKEUP:
332 sal_desc_ap_wakeup(p);
335 p += SAL_DESC_SIZE(*p);
341 ia64_sal_oemcall(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
342 u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, u64 arg7)
344 if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
346 SAL_CALL(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, arg7);
349 EXPORT_SYMBOL(ia64_sal_oemcall);
352 ia64_sal_oemcall_nolock(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
353 u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6,
356 if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
358 SAL_CALL_NOLOCK(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
362 EXPORT_SYMBOL(ia64_sal_oemcall_nolock);
365 ia64_sal_oemcall_reentrant(struct ia64_sal_retval *isrvp, u64 oemfunc,
366 u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5,
369 if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
371 SAL_CALL_REENTRANT(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
375 EXPORT_SYMBOL(ia64_sal_oemcall_reentrant);
378 ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
379 unsigned long *drift_info)
381 struct ia64_sal_retval isrv;
383 SAL_CALL(isrv, SAL_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
384 *ticks_per_second = isrv.v0;
385 *drift_info = isrv.v1;
388 EXPORT_SYMBOL_GPL(ia64_sal_freq_base);