Merge branch 'fix/opl3sa2-suspend' into topic/isa-misc

[linux-2.6] / drivers / scsi / qla2xxx / qla_init.c

/*
 * QLogic Fibre Channel HBA Driver
 * Copyright (c)  2003-2008 QLogic Corporation
 *
 * See LICENSE.qla2xxx for copyright and licensing details.
 */
#include "qla_def.h"
#include "qla_gbl.h"

#include <linux/delay.h>
#include <linux/vmalloc.h>

#include "qla_devtbl.h"

#ifdef CONFIG_SPARC
#include <asm/prom.h>
#endif

/*
*  QLogic ISP2x00 Hardware Support Function Prototypes.
*/
static int qla2x00_isp_firmware(scsi_qla_host_t *);
static void qla2x00_resize_request_q(scsi_qla_host_t *);
static int qla2x00_setup_chip(scsi_qla_host_t *);
static int qla2x00_init_rings(scsi_qla_host_t *);
static int qla2x00_fw_ready(scsi_qla_host_t *);
static int qla2x00_configure_hba(scsi_qla_host_t *);
static int qla2x00_configure_loop(scsi_qla_host_t *);
static int qla2x00_configure_local_loop(scsi_qla_host_t *);
static int qla2x00_configure_fabric(scsi_qla_host_t *);
static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *);
static int qla2x00_device_resync(scsi_qla_host_t *);
static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *,
    uint16_t *);

static int qla2x00_restart_isp(scsi_qla_host_t *);

static int qla2x00_find_new_loop_id(scsi_qla_host_t *, fc_port_t *);

static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
static int qla84xx_init_chip(scsi_qla_host_t *);
static int qla25xx_init_queues(struct qla_hw_data *);

/****************************************************************************/
/*                QLogic ISP2x00 Hardware Support Functions.                */
/****************************************************************************/

/*
* qla2x00_initialize_adapter
*      Initialize board.
*
* Input:
*      ha = adapter block pointer.
*
* Returns:
*      0 = success
*/
int
qla2x00_initialize_adapter(scsi_qla_host_t *vha)
{
        int     rval;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[0];
        /* Clear adapter flags. */
        vha->flags.online = 0;
        vha->flags.reset_active = 0;
        atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
        atomic_set(&vha->loop_state, LOOP_DOWN);
        vha->device_flags = DFLG_NO_CABLE;
        vha->dpc_flags = 0;
        vha->flags.management_server_logged_in = 0;
        vha->marker_needed = 0;
        ha->mbx_flags = 0;
        ha->isp_abort_cnt = 0;
        ha->beacon_blink_led = 0;
        set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);

        set_bit(0, ha->req_qid_map);
        set_bit(0, ha->rsp_qid_map);

        qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
        rval = ha->isp_ops->pci_config(vha);
        if (rval) {
                DEBUG2(printk("scsi(%ld): Unable to configure PCI space.\n",
                    vha->host_no));
                return (rval);
        }

        ha->isp_ops->reset_chip(vha);

        rval = qla2xxx_get_flash_info(vha);
        if (rval) {
                DEBUG2(printk("scsi(%ld): Unable to validate FLASH data.\n",
                    vha->host_no));
                return (rval);
        }

        ha->isp_ops->get_flash_version(vha, req->ring);

        qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");

        ha->isp_ops->nvram_config(vha);

        if (ha->flags.disable_serdes) {
                /* Mask HBA via NVRAM settings? */
                qla_printk(KERN_INFO, ha, "Masking HBA WWPN "
                    "%02x%02x%02x%02x%02x%02x%02x%02x (via NVRAM).\n",
                    vha->port_name[0], vha->port_name[1],
                    vha->port_name[2], vha->port_name[3],
                    vha->port_name[4], vha->port_name[5],
                    vha->port_name[6], vha->port_name[7]);
                return QLA_FUNCTION_FAILED;
        }

        qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");

        if (qla2x00_isp_firmware(vha) != QLA_SUCCESS) {
                rval = ha->isp_ops->chip_diag(vha);
                if (rval)
                        return (rval);
                rval = qla2x00_setup_chip(vha);
                if (rval)
                        return (rval);
        }
        if (IS_QLA84XX(ha)) {
                ha->cs84xx = qla84xx_get_chip(vha);
                if (!ha->cs84xx) {
                        qla_printk(KERN_ERR, ha,
                            "Unable to configure ISP84XX.\n");
                        return QLA_FUNCTION_FAILED;
                }
        }
        rval = qla2x00_init_rings(vha);

        return (rval);
}

/**
 * qla2100_pci_config() - Setup ISP21xx PCI configuration registers.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla2100_pci_config(scsi_qla_host_t *vha)
{
        uint16_t w;
        unsigned long flags;
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

        pci_set_master(ha->pdev);
        pci_try_set_mwi(ha->pdev);

        pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
        w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
        pci_write_config_word(ha->pdev, PCI_COMMAND, w);

        pci_disable_rom(ha->pdev);

        /* Get PCI bus information. */
        spin_lock_irqsave(&ha->hardware_lock, flags);
        ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        return QLA_SUCCESS;
}

/**
 * qla2300_pci_config() - Setup ISP23xx PCI configuration registers.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla2300_pci_config(scsi_qla_host_t *vha)
{
        uint16_t        w;
        unsigned long   flags = 0;
        uint32_t        cnt;
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

        pci_set_master(ha->pdev);
        pci_try_set_mwi(ha->pdev);

        pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
        w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);

        if (IS_QLA2322(ha) || IS_QLA6322(ha))
                w &= ~PCI_COMMAND_INTX_DISABLE;
        pci_write_config_word(ha->pdev, PCI_COMMAND, w);

        /*
         * If this is a 2300 card and not 2312, reset the
         * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately,
         * the 2310 also reports itself as a 2300 so we need to get the
         * fb revision level -- a 6 indicates it really is a 2300 and
         * not a 2310.
         */
        if (IS_QLA2300(ha)) {
                spin_lock_irqsave(&ha->hardware_lock, flags);

                /* Pause RISC. */
                WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
                for (cnt = 0; cnt < 30000; cnt++) {
                        if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
                                break;

                        udelay(10);
                }

                /* Select FPM registers. */
                WRT_REG_WORD(&reg->ctrl_status, 0x20);
                RD_REG_WORD(&reg->ctrl_status);

                /* Get the fb rev level */
                ha->fb_rev = RD_FB_CMD_REG(ha, reg);

                if (ha->fb_rev == FPM_2300)
                        pci_clear_mwi(ha->pdev);

                /* Deselect FPM registers. */
                WRT_REG_WORD(&reg->ctrl_status, 0x0);
                RD_REG_WORD(&reg->ctrl_status);

                /* Release RISC module. */
                WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
                for (cnt = 0; cnt < 30000; cnt++) {
                        if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) == 0)
                                break;

                        udelay(10);
                }

                spin_unlock_irqrestore(&ha->hardware_lock, flags);
        }

        pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);

        pci_disable_rom(ha->pdev);

        /* Get PCI bus information. */
        spin_lock_irqsave(&ha->hardware_lock, flags);
        ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        return QLA_SUCCESS;
}

/**
 * qla24xx_pci_config() - Setup ISP24xx PCI configuration registers.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla24xx_pci_config(scsi_qla_host_t *vha)
{
        uint16_t w;
        unsigned long flags = 0;
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

        pci_set_master(ha->pdev);
        pci_try_set_mwi(ha->pdev);

        pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
        w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
        w &= ~PCI_COMMAND_INTX_DISABLE;
        pci_write_config_word(ha->pdev, PCI_COMMAND, w);

        pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);

        /* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */
        if (pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX))
                pcix_set_mmrbc(ha->pdev, 2048);

        /* PCIe -- adjust Maximum Read Request Size (2048). */
        if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
                pcie_set_readrq(ha->pdev, 2048);

        pci_disable_rom(ha->pdev);

        ha->chip_revision = ha->pdev->revision;

        /* Get PCI bus information. */
        spin_lock_irqsave(&ha->hardware_lock, flags);
        ha->pci_attr = RD_REG_DWORD(&reg->ctrl_status);
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        return QLA_SUCCESS;
}

/**
 * qla25xx_pci_config() - Setup ISP25xx PCI configuration registers.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla25xx_pci_config(scsi_qla_host_t *vha)
{
        uint16_t w;
        struct qla_hw_data *ha = vha->hw;

        pci_set_master(ha->pdev);
        pci_try_set_mwi(ha->pdev);

        pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
        w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
        w &= ~PCI_COMMAND_INTX_DISABLE;
        pci_write_config_word(ha->pdev, PCI_COMMAND, w);

        /* PCIe -- adjust Maximum Read Request Size (2048). */
        if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
                pcie_set_readrq(ha->pdev, 2048);

        pci_disable_rom(ha->pdev);

        ha->chip_revision = ha->pdev->revision;

        return QLA_SUCCESS;
}

/**
 * qla2x00_isp_firmware() - Choose firmware image.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
static int
qla2x00_isp_firmware(scsi_qla_host_t *vha)
{
        int  rval;
        uint16_t loop_id, topo, sw_cap;
        uint8_t domain, area, al_pa;
        struct qla_hw_data *ha = vha->hw;

        /* Assume loading risc code */
        rval = QLA_FUNCTION_FAILED;

        if (ha->flags.disable_risc_code_load) {
                DEBUG2(printk("scsi(%ld): RISC CODE NOT loaded\n",
                    vha->host_no));
                qla_printk(KERN_INFO, ha, "RISC CODE NOT loaded\n");

                /* Verify checksum of loaded RISC code. */
                rval = qla2x00_verify_checksum(vha, ha->fw_srisc_address);
                if (rval == QLA_SUCCESS) {
                        /* And, verify we are not in ROM code. */
                        rval = qla2x00_get_adapter_id(vha, &loop_id, &al_pa,
                            &area, &domain, &topo, &sw_cap);
                }
        }

        if (rval) {
                DEBUG2_3(printk("scsi(%ld): **** Load RISC code ****\n",
                    vha->host_no));
        }

        return (rval);
}

/**
 * qla2x00_reset_chip() - Reset ISP chip.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
void
qla2x00_reset_chip(scsi_qla_host_t *vha)
{
        unsigned long   flags = 0;
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
        uint32_t        cnt;
        uint16_t        cmd;

        ha->isp_ops->disable_intrs(ha);

        spin_lock_irqsave(&ha->hardware_lock, flags);

        /* Turn off master enable */
        cmd = 0;
        pci_read_config_word(ha->pdev, PCI_COMMAND, &cmd);
        cmd &= ~PCI_COMMAND_MASTER;
        pci_write_config_word(ha->pdev, PCI_COMMAND, cmd);

        if (!IS_QLA2100(ha)) {
                /* Pause RISC. */
                WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
                if (IS_QLA2200(ha) || IS_QLA2300(ha)) {
                        for (cnt = 0; cnt < 30000; cnt++) {
                                if ((RD_REG_WORD(&reg->hccr) &
                                    HCCR_RISC_PAUSE) != 0)
                                        break;
                                udelay(100);
                        }
                } else {
                        RD_REG_WORD(&reg->hccr);        /* PCI Posting. */
                        udelay(10);
                }

                /* Select FPM registers. */
                WRT_REG_WORD(&reg->ctrl_status, 0x20);
                RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */

                /* FPM Soft Reset. */
                WRT_REG_WORD(&reg->fpm_diag_config, 0x100);
                RD_REG_WORD(&reg->fpm_diag_config);     /* PCI Posting. */

                /* Toggle Fpm Reset. */
                if (!IS_QLA2200(ha)) {
                        WRT_REG_WORD(&reg->fpm_diag_config, 0x0);
                        RD_REG_WORD(&reg->fpm_diag_config); /* PCI Posting. */
                }

                /* Select frame buffer registers. */
                WRT_REG_WORD(&reg->ctrl_status, 0x10);
                RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */

                /* Reset frame buffer FIFOs. */
                if (IS_QLA2200(ha)) {
                        WRT_FB_CMD_REG(ha, reg, 0xa000);
                        RD_FB_CMD_REG(ha, reg);         /* PCI Posting. */
                } else {
                        WRT_FB_CMD_REG(ha, reg, 0x00fc);

                        /* Read back fb_cmd until zero or 3 seconds max */
                        for (cnt = 0; cnt < 3000; cnt++) {
                                if ((RD_FB_CMD_REG(ha, reg) & 0xff) == 0)
                                        break;
                                udelay(100);
                        }
                }

                /* Select RISC module registers. */
                WRT_REG_WORD(&reg->ctrl_status, 0);
                RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */

                /* Reset RISC processor. */
                WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
                RD_REG_WORD(&reg->hccr);                /* PCI Posting. */

                /* Release RISC processor. */
                WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
                RD_REG_WORD(&reg->hccr);                /* PCI Posting. */
        }

        WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
        WRT_REG_WORD(&reg->hccr, HCCR_CLR_HOST_INT);

        /* Reset ISP chip. */
        WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);

        /* Wait for RISC to recover from reset. */
        if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
                /*
                 * It is necessary to for a delay here since the card doesn't
                 * respond to PCI reads during a reset. On some architectures
                 * this will result in an MCA.
                 */
                udelay(20);
                for (cnt = 30000; cnt; cnt--) {
                        if ((RD_REG_WORD(&reg->ctrl_status) &
                            CSR_ISP_SOFT_RESET) == 0)
                                break;
                        udelay(100);
                }
        } else
                udelay(10);

        /* Reset RISC processor. */
        WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);

        WRT_REG_WORD(&reg->semaphore, 0);

        /* Release RISC processor. */
        WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
        RD_REG_WORD(&reg->hccr);                        /* PCI Posting. */

        if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
                for (cnt = 0; cnt < 30000; cnt++) {
                        if (RD_MAILBOX_REG(ha, reg, 0) != MBS_BUSY)
                                break;

                        udelay(100);
                }
        } else
                udelay(100);

        /* Turn on master enable */
        cmd |= PCI_COMMAND_MASTER;
        pci_write_config_word(ha->pdev, PCI_COMMAND, cmd);

        /* Disable RISC pause on FPM parity error. */
        if (!IS_QLA2100(ha)) {
                WRT_REG_WORD(&reg->hccr, HCCR_DISABLE_PARITY_PAUSE);
                RD_REG_WORD(&reg->hccr);                /* PCI Posting. */
        }

        spin_unlock_irqrestore(&ha->hardware_lock, flags);
}

/**
 * qla24xx_reset_risc() - Perform full reset of ISP24xx RISC.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
static inline void
qla24xx_reset_risc(scsi_qla_host_t *vha)
{
        int hw_evt = 0;
        unsigned long flags = 0;
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
        uint32_t cnt, d2;
        uint16_t wd;

        spin_lock_irqsave(&ha->hardware_lock, flags);

        /* Reset RISC. */
        WRT_REG_DWORD(&reg->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
        for (cnt = 0; cnt < 30000; cnt++) {
                if ((RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE) == 0)
                        break;

                udelay(10);
        }

        WRT_REG_DWORD(&reg->ctrl_status,
            CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
        pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);

        udelay(100);
        /* Wait for firmware to complete NVRAM accesses. */
        d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
        for (cnt = 10000 ; cnt && d2; cnt--) {
                udelay(5);
                d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
                barrier();
        }
        if (cnt == 0)
                hw_evt = 1;

        /* Wait for soft-reset to complete. */
        d2 = RD_REG_DWORD(&reg->ctrl_status);
        for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
                udelay(5);
                d2 = RD_REG_DWORD(&reg->ctrl_status);
                barrier();
        }

        WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
        RD_REG_DWORD(&reg->hccr);

        WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
        RD_REG_DWORD(&reg->hccr);

        WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_RESET);
        RD_REG_DWORD(&reg->hccr);

        d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
        for (cnt = 6000000 ; cnt && d2; cnt--) {
                udelay(5);
                d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
                barrier();
        }

        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        if (IS_NOPOLLING_TYPE(ha))
                ha->isp_ops->enable_intrs(ha);
}

/**
 * qla24xx_reset_chip() - Reset ISP24xx chip.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
void
qla24xx_reset_chip(scsi_qla_host_t *vha)
{
        struct qla_hw_data *ha = vha->hw;
        ha->isp_ops->disable_intrs(ha);

        /* Perform RISC reset. */
        qla24xx_reset_risc(vha);
}

/**
 * qla2x00_chip_diag() - Test chip for proper operation.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla2x00_chip_diag(scsi_qla_host_t *vha)
{
        int             rval;
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
        unsigned long   flags = 0;
        uint16_t        data;
        uint32_t        cnt;
        uint16_t        mb[5];
        struct req_que *req = ha->req_q_map[0];

        /* Assume a failed state */
        rval = QLA_FUNCTION_FAILED;

        DEBUG3(printk("scsi(%ld): Testing device at %lx.\n",
            vha->host_no, (u_long)&reg->flash_address));

        spin_lock_irqsave(&ha->hardware_lock, flags);

        /* Reset ISP chip. */
        WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);

        /*
         * We need to have a delay here since the card will not respond while
         * in reset causing an MCA on some architectures.
         */
        udelay(20);
        data = qla2x00_debounce_register(&reg->ctrl_status);
        for (cnt = 6000000 ; cnt && (data & CSR_ISP_SOFT_RESET); cnt--) {
                udelay(5);
                data = RD_REG_WORD(&reg->ctrl_status);
                barrier();
        }

        if (!cnt)
                goto chip_diag_failed;

        DEBUG3(printk("scsi(%ld): Reset register cleared by chip reset\n",
            ha->host_no));

        /* Reset RISC processor. */
        WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
        WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);

        /* Workaround for QLA2312 PCI parity error */
        if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
                data = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 0));
                for (cnt = 6000000; cnt && (data == MBS_BUSY); cnt--) {
                        udelay(5);
                        data = RD_MAILBOX_REG(ha, reg, 0);
                        barrier();
                }
        } else
                udelay(10);

        if (!cnt)
                goto chip_diag_failed;

        /* Check product ID of chip */
        DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", ha->host_no));

        mb[1] = RD_MAILBOX_REG(ha, reg, 1);
        mb[2] = RD_MAILBOX_REG(ha, reg, 2);
        mb[3] = RD_MAILBOX_REG(ha, reg, 3);
        mb[4] = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 4));
        if (mb[1] != PROD_ID_1 || (mb[2] != PROD_ID_2 && mb[2] != PROD_ID_2a) ||
            mb[3] != PROD_ID_3) {
                qla_printk(KERN_WARNING, ha,
                    "Wrong product ID = 0x%x,0x%x,0x%x\n", mb[1], mb[2], mb[3]);

                goto chip_diag_failed;
        }
        ha->product_id[0] = mb[1];
        ha->product_id[1] = mb[2];
        ha->product_id[2] = mb[3];
        ha->product_id[3] = mb[4];

        /* Adjust fw RISC transfer size */
        if (req->length > 1024)
                ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
        else
                ha->fw_transfer_size = REQUEST_ENTRY_SIZE *
                    req->length;

        if (IS_QLA2200(ha) &&
            RD_MAILBOX_REG(ha, reg, 7) == QLA2200A_RISC_ROM_VER) {
                /* Limit firmware transfer size with a 2200A */
                DEBUG3(printk("scsi(%ld): Found QLA2200A chip.\n",
                    vha->host_no));

                ha->device_type |= DT_ISP2200A;
                ha->fw_transfer_size = 128;
        }

        /* Wrap Incoming Mailboxes Test. */
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        DEBUG3(printk("scsi(%ld): Checking mailboxes.\n", vha->host_no));
        rval = qla2x00_mbx_reg_test(vha);
        if (rval) {
                DEBUG(printk("scsi(%ld): Failed mailbox send register test\n",
                    vha->host_no));
                qla_printk(KERN_WARNING, ha,
                    "Failed mailbox send register test\n");
        }
        else {
                /* Flag a successful rval */
                rval = QLA_SUCCESS;
        }
        spin_lock_irqsave(&ha->hardware_lock, flags);

chip_diag_failed:
        if (rval)
                DEBUG2_3(printk("scsi(%ld): Chip diagnostics **** FAILED "
                    "****\n", vha->host_no));

        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        return (rval);
}

/**
 * qla24xx_chip_diag() - Test ISP24xx for proper operation.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla24xx_chip_diag(scsi_qla_host_t *vha)
{
        int rval;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[0];

        /* Perform RISC reset. */
        qla24xx_reset_risc(vha);

        ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length;

        rval = qla2x00_mbx_reg_test(vha);
        if (rval) {
                DEBUG(printk("scsi(%ld): Failed mailbox send register test\n",
                    vha->host_no));
                qla_printk(KERN_WARNING, ha,
                    "Failed mailbox send register test\n");
        } else {
                /* Flag a successful rval */
                rval = QLA_SUCCESS;
        }

        return rval;
}

void
qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
{
        int rval;
        uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size,
            eft_size, fce_size, mq_size;
        dma_addr_t tc_dma;
        void *tc;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[0];
        struct rsp_que *rsp = ha->rsp_q_map[0];

        if (ha->fw_dump) {
                qla_printk(KERN_WARNING, ha,
                    "Firmware dump previously allocated.\n");
                return;
        }

        ha->fw_dumped = 0;
        fixed_size = mem_size = eft_size = fce_size = mq_size = 0;
        if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
                fixed_size = sizeof(struct qla2100_fw_dump);
        } else if (IS_QLA23XX(ha)) {
                fixed_size = offsetof(struct qla2300_fw_dump, data_ram);
                mem_size = (ha->fw_memory_size - 0x11000 + 1) *
                    sizeof(uint16_t);
        } else if (IS_FWI2_CAPABLE(ha)) {
                if (IS_QLA81XX(ha))
                        fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem);
                else if (IS_QLA25XX(ha))
                        fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem);
                else
                        fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem);
                mem_size = (ha->fw_memory_size - 0x100000 + 1) *
                    sizeof(uint32_t);
                if (ha->mqenable)
                        mq_size = sizeof(struct qla2xxx_mq_chain);

                /* Allocate memory for Fibre Channel Event Buffer. */
                if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))
                        goto try_eft;

                tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
                    GFP_KERNEL);
                if (!tc) {
                        qla_printk(KERN_WARNING, ha, "Unable to allocate "
                            "(%d KB) for FCE.\n", FCE_SIZE / 1024);
                        goto try_eft;
                }

                memset(tc, 0, FCE_SIZE);
                rval = qla2x00_enable_fce_trace(vha, tc_dma, FCE_NUM_BUFFERS,
                    ha->fce_mb, &ha->fce_bufs);
                if (rval) {
                        qla_printk(KERN_WARNING, ha, "Unable to initialize "
                            "FCE (%d).\n", rval);
                        dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
                            tc_dma);
                        ha->flags.fce_enabled = 0;
                        goto try_eft;
                }

                qla_printk(KERN_INFO, ha, "Allocated (%d KB) for FCE...\n",
                    FCE_SIZE / 1024);

                fce_size = sizeof(struct qla2xxx_fce_chain) + EFT_SIZE;
                ha->flags.fce_enabled = 1;
                ha->fce_dma = tc_dma;
                ha->fce = tc;
try_eft:
                /* Allocate memory for Extended Trace Buffer. */
                tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
                    GFP_KERNEL);
                if (!tc) {
                        qla_printk(KERN_WARNING, ha, "Unable to allocate "
                            "(%d KB) for EFT.\n", EFT_SIZE / 1024);
                        goto cont_alloc;
                }

                memset(tc, 0, EFT_SIZE);
                rval = qla2x00_enable_eft_trace(vha, tc_dma, EFT_NUM_BUFFERS);
                if (rval) {
                        qla_printk(KERN_WARNING, ha, "Unable to initialize "
                            "EFT (%d).\n", rval);
                        dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
                            tc_dma);
                        goto cont_alloc;
                }

                qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
                    EFT_SIZE / 1024);

                eft_size = EFT_SIZE;
                ha->eft_dma = tc_dma;
                ha->eft = tc;
        }
cont_alloc:
        req_q_size = req->length * sizeof(request_t);
        rsp_q_size = rsp->length * sizeof(response_t);

        dump_size = offsetof(struct qla2xxx_fw_dump, isp);
        dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
            eft_size;
        ha->chain_offset = dump_size;
        dump_size += mq_size + fce_size;

        ha->fw_dump = vmalloc(dump_size);
        if (!ha->fw_dump) {
                qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for "
                    "firmware dump!!!\n", dump_size / 1024);

                if (ha->eft) {
                        dma_free_coherent(&ha->pdev->dev, eft_size, ha->eft,
                            ha->eft_dma);
                        ha->eft = NULL;
                        ha->eft_dma = 0;
                }
                return;
        }
        qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware dump...\n",
            dump_size / 1024);

        ha->fw_dump_len = dump_size;
        ha->fw_dump->signature[0] = 'Q';
        ha->fw_dump->signature[1] = 'L';
        ha->fw_dump->signature[2] = 'G';
        ha->fw_dump->signature[3] = 'C';
        ha->fw_dump->version = __constant_htonl(1);

        ha->fw_dump->fixed_size = htonl(fixed_size);
        ha->fw_dump->mem_size = htonl(mem_size);
        ha->fw_dump->req_q_size = htonl(req_q_size);
        ha->fw_dump->rsp_q_size = htonl(rsp_q_size);

        ha->fw_dump->eft_size = htonl(eft_size);
        ha->fw_dump->eft_addr_l = htonl(LSD(ha->eft_dma));
        ha->fw_dump->eft_addr_h = htonl(MSD(ha->eft_dma));

        ha->fw_dump->header_size =
            htonl(offsetof(struct qla2xxx_fw_dump, isp));
}

/**
 * qla2x00_resize_request_q() - Resize request queue given available ISP memory.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
static void
qla2x00_resize_request_q(scsi_qla_host_t *vha)
{
        int rval;
        uint16_t fw_iocb_cnt = 0;
        uint16_t request_q_length = REQUEST_ENTRY_CNT_2XXX_EXT_MEM;
        dma_addr_t request_dma;
        request_t *request_ring;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[0];

        /* Valid only on recent ISPs. */
        if (IS_QLA2100(ha) || IS_QLA2200(ha))
                return;

        /* Retrieve IOCB counts available to the firmware. */
        rval = qla2x00_get_resource_cnts(vha, NULL, NULL, NULL, &fw_iocb_cnt,
                                        &ha->max_npiv_vports);
        if (rval)
                return;
        /* No point in continuing if current settings are sufficient. */
        if (fw_iocb_cnt < 1024)
                return;
        if (req->length >= request_q_length)
                return;

        /* Attempt to claim larger area for request queue. */
        request_ring = dma_alloc_coherent(&ha->pdev->dev,
            (request_q_length + 1) * sizeof(request_t), &request_dma,
            GFP_KERNEL);
        if (request_ring == NULL)
                return;

        /* Resize successful, report extensions. */
        qla_printk(KERN_INFO, ha, "Extended memory detected (%d KB)...\n",
            (ha->fw_memory_size + 1) / 1024);
        qla_printk(KERN_INFO, ha, "Resizing request queue depth "
            "(%d -> %d)...\n", req->length, request_q_length);

        /* Clear old allocations. */
        dma_free_coherent(&ha->pdev->dev,
            (req->length + 1) * sizeof(request_t), req->ring,
            req->dma);

        /* Begin using larger queue. */
        req->length = request_q_length;
        req->ring = request_ring;
        req->dma = request_dma;
}

/**
 * qla2x00_setup_chip() - Load and start RISC firmware.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
static int
qla2x00_setup_chip(scsi_qla_host_t *vha)
{
        int rval;
        uint32_t srisc_address = 0;
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
        unsigned long flags;

        if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
                /* Disable SRAM, Instruction RAM and GP RAM parity.  */
                spin_lock_irqsave(&ha->hardware_lock, flags);
                WRT_REG_WORD(&reg->hccr, (HCCR_ENABLE_PARITY + 0x0));
                RD_REG_WORD(&reg->hccr);
                spin_unlock_irqrestore(&ha->hardware_lock, flags);
        }

        /* Load firmware sequences */
        rval = ha->isp_ops->load_risc(vha, &srisc_address);
        if (rval == QLA_SUCCESS) {
                DEBUG(printk("scsi(%ld): Verifying Checksum of loaded RISC "
                    "code.\n", vha->host_no));

                rval = qla2x00_verify_checksum(vha, srisc_address);
                if (rval == QLA_SUCCESS) {
                        /* Start firmware execution. */
                        DEBUG(printk("scsi(%ld): Checksum OK, start "
                            "firmware.\n", vha->host_no));

                        rval = qla2x00_execute_fw(vha, srisc_address);
                        /* Retrieve firmware information. */
                        if (rval == QLA_SUCCESS && ha->fw_major_version == 0) {
                                qla2x00_get_fw_version(vha,
                                    &ha->fw_major_version,
                                    &ha->fw_minor_version,
                                    &ha->fw_subminor_version,
                                    &ha->fw_attributes, &ha->fw_memory_size,
                                    ha->mpi_version, &ha->mpi_capabilities);
                                ha->flags.npiv_supported = 0;
                                if (IS_QLA2XXX_MIDTYPE(ha) &&
                                         (ha->fw_attributes & BIT_2)) {
                                        ha->flags.npiv_supported = 1;
                                        if ((!ha->max_npiv_vports) ||
                                            ((ha->max_npiv_vports + 1) %
                                            MIN_MULTI_ID_FABRIC))
                                                ha->max_npiv_vports =
                                                    MIN_MULTI_ID_FABRIC - 1;
                                }
                                qla2x00_resize_request_q(vha);

                                if (ql2xallocfwdump)
                                        qla2x00_alloc_fw_dump(vha);
                        }
                } else {
                        DEBUG2(printk(KERN_INFO
                            "scsi(%ld): ISP Firmware failed checksum.\n",
                            vha->host_no));
                }
        }

        if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
                /* Enable proper parity. */
                spin_lock_irqsave(&ha->hardware_lock, flags);
                if (IS_QLA2300(ha))
                        /* SRAM parity */
                        WRT_REG_WORD(&reg->hccr, HCCR_ENABLE_PARITY + 0x1);
                else
                        /* SRAM, Instruction RAM and GP RAM parity */
                        WRT_REG_WORD(&reg->hccr, HCCR_ENABLE_PARITY + 0x7);
                RD_REG_WORD(&reg->hccr);
                spin_unlock_irqrestore(&ha->hardware_lock, flags);
        }

        if (rval) {
                DEBUG2_3(printk("scsi(%ld): Setup chip **** FAILED ****.\n",
                    vha->host_no));
        }

        return (rval);
}

/**
 * qla2x00_init_response_q_entries() - Initializes response queue entries.
 * @ha: HA context
 *
 * Beginning of request ring has initialization control block already built
 * by nvram config routine.
 *
 * Returns 0 on success.
 */
void
qla2x00_init_response_q_entries(struct rsp_que *rsp)
{
        uint16_t cnt;
        response_t *pkt;

        pkt = rsp->ring_ptr;
        for (cnt = 0; cnt < rsp->length; cnt++) {
                pkt->signature = RESPONSE_PROCESSED;
                pkt++;
        }

}

/**
 * qla2x00_update_fw_options() - Read and process firmware options.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
void
qla2x00_update_fw_options(scsi_qla_host_t *vha)
{
        uint16_t swing, emphasis, tx_sens, rx_sens;
        struct qla_hw_data *ha = vha->hw;

        memset(ha->fw_options, 0, sizeof(ha->fw_options));
        qla2x00_get_fw_options(vha, ha->fw_options);

        if (IS_QLA2100(ha) || IS_QLA2200(ha))
                return;

        /* Serial Link options. */
        DEBUG3(printk("scsi(%ld): Serial link options:\n",
            vha->host_no));
        DEBUG3(qla2x00_dump_buffer((uint8_t *)&ha->fw_seriallink_options,
            sizeof(ha->fw_seriallink_options)));

        ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
        if (ha->fw_seriallink_options[3] & BIT_2) {
                ha->fw_options[1] |= FO1_SET_EMPHASIS_SWING;

                /*  1G settings */
                swing = ha->fw_seriallink_options[2] & (BIT_2 | BIT_1 | BIT_0);
                emphasis = (ha->fw_seriallink_options[2] &
                    (BIT_4 | BIT_3)) >> 3;
                tx_sens = ha->fw_seriallink_options[0] &
                    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
                rx_sens = (ha->fw_seriallink_options[0] &
                    (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
                ha->fw_options[10] = (emphasis << 14) | (swing << 8);
                if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
                        if (rx_sens == 0x0)
                                rx_sens = 0x3;
                        ha->fw_options[10] |= (tx_sens << 4) | rx_sens;
                } else if (IS_QLA2322(ha) || IS_QLA6322(ha))
                        ha->fw_options[10] |= BIT_5 |
                            ((rx_sens & (BIT_1 | BIT_0)) << 2) |
                            (tx_sens & (BIT_1 | BIT_0));

                /*  2G settings */
                swing = (ha->fw_seriallink_options[2] &
                    (BIT_7 | BIT_6 | BIT_5)) >> 5;
                emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0);
                tx_sens = ha->fw_seriallink_options[1] &
                    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
                rx_sens = (ha->fw_seriallink_options[1] &
                    (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
                ha->fw_options[11] = (emphasis << 14) | (swing << 8);
                if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
                        if (rx_sens == 0x0)
                                rx_sens = 0x3;
                        ha->fw_options[11] |= (tx_sens << 4) | rx_sens;
                } else if (IS_QLA2322(ha) || IS_QLA6322(ha))
                        ha->fw_options[11] |= BIT_5 |
                            ((rx_sens & (BIT_1 | BIT_0)) << 2) |
                            (tx_sens & (BIT_1 | BIT_0));
        }

        /* FCP2 options. */
        /*  Return command IOCBs without waiting for an ABTS to complete. */
        ha->fw_options[3] |= BIT_13;

        /* LED scheme. */
        if (ha->flags.enable_led_scheme)
                ha->fw_options[2] |= BIT_12;

        /* Detect ISP6312. */
        if (IS_QLA6312(ha))
                ha->fw_options[2] |= BIT_13;

        /* Update firmware options. */
        qla2x00_set_fw_options(vha, ha->fw_options);
}

void
qla24xx_update_fw_options(scsi_qla_host_t *vha)
{
        int rval;
        struct qla_hw_data *ha = vha->hw;

        /* Update Serial Link options. */
        if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0)
                return;

        rval = qla2x00_set_serdes_params(vha,
            le16_to_cpu(ha->fw_seriallink_options24[1]),
            le16_to_cpu(ha->fw_seriallink_options24[2]),
            le16_to_cpu(ha->fw_seriallink_options24[3]));
        if (rval != QLA_SUCCESS) {
                qla_printk(KERN_WARNING, ha,
                    "Unable to update Serial Link options (%x).\n", rval);
        }
}

void
qla2x00_config_rings(struct scsi_qla_host *vha)
{
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
        struct req_que *req = ha->req_q_map[0];
        struct rsp_que *rsp = ha->rsp_q_map[0];

        /* Setup ring parameters in initialization control block. */
        ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0);
        ha->init_cb->response_q_inpointer = __constant_cpu_to_le16(0);
        ha->init_cb->request_q_length = cpu_to_le16(req->length);
        ha->init_cb->response_q_length = cpu_to_le16(rsp->length);
        ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(req->dma));
        ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(req->dma));
        ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma));
        ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma));

        WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0);
        WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0);
        WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0);
        WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0);
        RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg));            /* PCI Posting. */
}

void
qla24xx_config_rings(struct scsi_qla_host *vha)
{
        struct qla_hw_data *ha = vha->hw;
        device_reg_t __iomem *reg = ISP_QUE_REG(ha, 0);
        struct device_reg_2xxx __iomem *ioreg = &ha->iobase->isp;
        struct qla_msix_entry *msix;
        struct init_cb_24xx *icb;
        uint16_t rid = 0;
        struct req_que *req = ha->req_q_map[0];
        struct rsp_que *rsp = ha->rsp_q_map[0];

/* Setup ring parameters in initialization control block. */
        icb = (struct init_cb_24xx *)ha->init_cb;
        icb->request_q_outpointer = __constant_cpu_to_le16(0);
        icb->response_q_inpointer = __constant_cpu_to_le16(0);
        icb->request_q_length = cpu_to_le16(req->length);
        icb->response_q_length = cpu_to_le16(rsp->length);
        icb->request_q_address[0] = cpu_to_le32(LSD(req->dma));
        icb->request_q_address[1] = cpu_to_le32(MSD(req->dma));
        icb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma));
        icb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma));

        if (ha->mqenable) {
                icb->qos = __constant_cpu_to_le16(QLA_DEFAULT_QUE_QOS);
                icb->rid = __constant_cpu_to_le16(rid);
                if (ha->flags.msix_enabled) {
                        msix = &ha->msix_entries[1];
                        DEBUG2_17(printk(KERN_INFO
                        "Reistering vector 0x%x for base que\n", msix->entry));
                        icb->msix = cpu_to_le16(msix->entry);
                }
                /* Use alternate PCI bus number */
                if (MSB(rid))
                        icb->firmware_options_2 |=
                                __constant_cpu_to_le32(BIT_19);
                /* Use alternate PCI devfn */
                if (LSB(rid))
                        icb->firmware_options_2 |=
                                __constant_cpu_to_le32(BIT_18);

                icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22);
                icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23);

                WRT_REG_DWORD(&reg->isp25mq.req_q_in, 0);
                WRT_REG_DWORD(&reg->isp25mq.req_q_out, 0);
                WRT_REG_DWORD(&reg->isp25mq.rsp_q_in, 0);
                WRT_REG_DWORD(&reg->isp25mq.rsp_q_out, 0);
        } else {
                WRT_REG_DWORD(&reg->isp24.req_q_in, 0);
                WRT_REG_DWORD(&reg->isp24.req_q_out, 0);
                WRT_REG_DWORD(&reg->isp24.rsp_q_in, 0);
                WRT_REG_DWORD(&reg->isp24.rsp_q_out, 0);
        }
        /* PCI posting */
        RD_REG_DWORD(&ioreg->hccr);
}

/**
 * qla2x00_init_rings() - Initializes firmware.
 * @ha: HA context
 *
 * Beginning of request ring has initialization control block already built
 * by nvram config routine.
 *
 * Returns 0 on success.
 */
static int
qla2x00_init_rings(scsi_qla_host_t *vha)
{
        int     rval;
        unsigned long flags = 0;
        int cnt, que;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req;
        struct rsp_que *rsp;
        struct scsi_qla_host *vp;
        struct mid_init_cb_24xx *mid_init_cb =
            (struct mid_init_cb_24xx *) ha->init_cb;

        spin_lock_irqsave(&ha->hardware_lock, flags);

        /* Clear outstanding commands array. */
        for (que = 0; que < ha->max_queues; que++) {
                req = ha->req_q_map[que];
                if (!req)
                        continue;
                for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
                        req->outstanding_cmds[cnt] = NULL;

                req->current_outstanding_cmd = 0;

                /* Initialize firmware. */
                req->ring_ptr  = req->ring;
                req->ring_index    = 0;
                req->cnt      = req->length;
        }

        for (que = 0; que < ha->max_queues; que++) {
                rsp = ha->rsp_q_map[que];
                if (!rsp)
                        continue;
                rsp->ring_ptr = rsp->ring;
                rsp->ring_index    = 0;

                /* Initialize response queue entries */
                qla2x00_init_response_q_entries(rsp);
        }

        /* Clear RSCN queue. */
        list_for_each_entry(vp, &ha->vp_list, list) {
                vp->rscn_in_ptr = 0;
                vp->rscn_out_ptr = 0;
        }
        ha->isp_ops->config_rings(vha);

        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        /* Update any ISP specific firmware options before initialization. */
        ha->isp_ops->update_fw_options(vha);

        DEBUG(printk("scsi(%ld): Issue init firmware.\n", vha->host_no));

        if (ha->flags.npiv_supported)
                mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);

        mid_init_cb->options = __constant_cpu_to_le16(BIT_1);

        rval = qla2x00_init_firmware(vha, ha->init_cb_size);
        if (rval) {
                DEBUG2_3(printk("scsi(%ld): Init firmware **** FAILED ****.\n",
                    vha->host_no));
        } else {
                DEBUG3(printk("scsi(%ld): Init firmware -- success.\n",
                    vha->host_no));
        }

        return (rval);
}

/**
 * qla2x00_fw_ready() - Waits for firmware ready.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
static int
qla2x00_fw_ready(scsi_qla_host_t *vha)
{
        int             rval;
        unsigned long   wtime, mtime, cs84xx_time;
        uint16_t        min_wait;       /* Minimum wait time if loop is down */
        uint16_t        wait_time;      /* Wait time if loop is coming ready */
        uint16_t        state[3];
        struct qla_hw_data *ha = vha->hw;

        rval = QLA_SUCCESS;

        /* 20 seconds for loop down. */
        min_wait = 20;

        /*
         * Firmware should take at most one RATOV to login, plus 5 seconds for
         * our own processing.
         */
        if ((wait_time = (ha->retry_count*ha->login_timeout) + 5) < min_wait) {
                wait_time = min_wait;
        }

        /* Min wait time if loop down */
        mtime = jiffies + (min_wait * HZ);

        /* wait time before firmware ready */
        wtime = jiffies + (wait_time * HZ);

        /* Wait for ISP to finish LIP */
        if (!vha->flags.init_done)
                qla_printk(KERN_INFO, ha, "Waiting for LIP to complete...\n");

        DEBUG3(printk("scsi(%ld): Waiting for LIP to complete...\n",
            vha->host_no));

        do {
                rval = qla2x00_get_firmware_state(vha, state);
                if (rval == QLA_SUCCESS) {
                        if (state[0] < FSTATE_LOSS_OF_SYNC) {
                                vha->device_flags &= ~DFLG_NO_CABLE;
                        }
                        if (IS_QLA84XX(ha) && state[0] != FSTATE_READY) {
                                DEBUG16(printk("scsi(%ld): fw_state=%x "
                                    "84xx=%x.\n", vha->host_no, state[0],
                                    state[2]));
                                if ((state[2] & FSTATE_LOGGED_IN) &&
                                     (state[2] & FSTATE_WAITING_FOR_VERIFY)) {
                                        DEBUG16(printk("scsi(%ld): Sending "
                                            "verify iocb.\n", vha->host_no));

                                        cs84xx_time = jiffies;
                                        rval = qla84xx_init_chip(vha);
                                        if (rval != QLA_SUCCESS)
                                                break;

                                        /* Add time taken to initialize. */
                                        cs84xx_time = jiffies - cs84xx_time;
                                        wtime += cs84xx_time;
                                        mtime += cs84xx_time;
                                        DEBUG16(printk("scsi(%ld): Increasing "
                                            "wait time by %ld. New time %ld\n",
                                            vha->host_no, cs84xx_time, wtime));
                                }
                        } else if (state[0] == FSTATE_READY) {
                                DEBUG(printk("scsi(%ld): F/W Ready - OK \n",
                                    vha->host_no));

                                qla2x00_get_retry_cnt(vha, &ha->retry_count,
                                    &ha->login_timeout, &ha->r_a_tov);

                                rval = QLA_SUCCESS;
                                break;
                        }

                        rval = QLA_FUNCTION_FAILED;

                        if (atomic_read(&vha->loop_down_timer) &&
                            state[0] != FSTATE_READY) {
                                /* Loop down. Timeout on min_wait for states
                                 * other than Wait for Login.
                                 */
                                if (time_after_eq(jiffies, mtime)) {
                                        qla_printk(KERN_INFO, ha,
                                            "Cable is unplugged...\n");

                                        vha->device_flags |= DFLG_NO_CABLE;
                                        break;
                                }
                        }
                } else {
                        /* Mailbox cmd failed. Timeout on min_wait. */
                        if (time_after_eq(jiffies, mtime))
                                break;
                }

                if (time_after_eq(jiffies, wtime))
                        break;

                /* Delay for a while */
                msleep(500);

                DEBUG3(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
                    vha->host_no, state[0], jiffies));
        } while (1);

        DEBUG(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
            vha->host_no, state[0], jiffies));

        if (rval) {
                DEBUG2_3(printk("scsi(%ld): Firmware ready **** FAILED ****.\n",
                    vha->host_no));
        }

        return (rval);
}

/*
*  qla2x00_configure_hba
*      Setup adapter context.
*
* Input:
*      ha = adapter state pointer.
*
* Returns:
*      0 = success
*
* Context:
*      Kernel context.
*/
static int
qla2x00_configure_hba(scsi_qla_host_t *vha)
{
        int       rval;
        uint16_t      loop_id;
        uint16_t      topo;
        uint16_t      sw_cap;
        uint8_t       al_pa;
        uint8_t       area;
        uint8_t       domain;
        char            connect_type[22];
        struct qla_hw_data *ha = vha->hw;

        /* Get host addresses. */
        rval = qla2x00_get_adapter_id(vha,
            &loop_id, &al_pa, &area, &domain, &topo, &sw_cap);
        if (rval != QLA_SUCCESS) {
                if (LOOP_TRANSITION(vha) || atomic_read(&ha->loop_down_timer) ||
                    (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
                        DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
                            __func__, vha->host_no));
                } else {
                        qla_printk(KERN_WARNING, ha,
                            "ERROR -- Unable to get host loop ID.\n");
                        set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
                }
                return (rval);
        }

        if (topo == 4) {
                qla_printk(KERN_INFO, ha,
                        "Cannot get topology - retrying.\n");
                return (QLA_FUNCTION_FAILED);
        }

        vha->loop_id = loop_id;

        /* initialize */
        ha->min_external_loopid = SNS_FIRST_LOOP_ID;
        ha->operating_mode = LOOP;
        ha->switch_cap = 0;

        switch (topo) {
        case 0:
                DEBUG3(printk("scsi(%ld): HBA in NL topology.\n",
                    vha->host_no));
                ha->current_topology = ISP_CFG_NL;
                strcpy(connect_type, "(Loop)");
                break;

        case 1:
                DEBUG3(printk("scsi(%ld): HBA in FL topology.\n",
                    vha->host_no));
                ha->switch_cap = sw_cap;
                ha->current_topology = ISP_CFG_FL;
                strcpy(connect_type, "(FL_Port)");
                break;

        case 2:
                DEBUG3(printk("scsi(%ld): HBA in N P2P topology.\n",
                    vha->host_no));
                ha->operating_mode = P2P;
                ha->current_topology = ISP_CFG_N;
                strcpy(connect_type, "(N_Port-to-N_Port)");
                break;

        case 3:
                DEBUG3(printk("scsi(%ld): HBA in F P2P topology.\n",
                    vha->host_no));
                ha->switch_cap = sw_cap;
                ha->operating_mode = P2P;
                ha->current_topology = ISP_CFG_F;
                strcpy(connect_type, "(F_Port)");
                break;

        default:
                DEBUG3(printk("scsi(%ld): HBA in unknown topology %x. "
                    "Using NL.\n",
                    vha->host_no, topo));
                ha->current_topology = ISP_CFG_NL;
                strcpy(connect_type, "(Loop)");
                break;
        }

        /* Save Host port and loop ID. */
        /* byte order - Big Endian */
        vha->d_id.b.domain = domain;
        vha->d_id.b.area = area;
        vha->d_id.b.al_pa = al_pa;

        if (!vha->flags.init_done)
                qla_printk(KERN_INFO, ha,
                    "Topology - %s, Host Loop address 0x%x\n",
                    connect_type, vha->loop_id);

        if (rval) {
                DEBUG2_3(printk("scsi(%ld): FAILED.\n", vha->host_no));
        } else {
                DEBUG3(printk("scsi(%ld): exiting normally.\n", vha->host_no));
        }

        return(rval);
}

static inline void
qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len,
        char *def)
{
        char *st, *en;
        uint16_t index;
        struct qla_hw_data *ha = vha->hw;

        if (memcmp(model, BINZERO, len) != 0) {
                strncpy(ha->model_number, model, len);
                st = en = ha->model_number;
                en += len - 1;
                while (en > st) {
                        if (*en != 0x20 && *en != 0x00)
                                break;
                        *en-- = '\0';
                }

                index = (ha->pdev->subsystem_device & 0xff);
                if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
                    index < QLA_MODEL_NAMES)
                        strncpy(ha->model_desc,
                            qla2x00_model_name[index * 2 + 1],
                            sizeof(ha->model_desc) - 1);
        } else {
                index = (ha->pdev->subsystem_device & 0xff);
                if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
                    index < QLA_MODEL_NAMES) {
                        strcpy(ha->model_number,
                            qla2x00_model_name[index * 2]);
                        strncpy(ha->model_desc,
                            qla2x00_model_name[index * 2 + 1],
                            sizeof(ha->model_desc) - 1);
                } else {
                        strcpy(ha->model_number, def);
                }
        }
        if (IS_FWI2_CAPABLE(ha))
                qla2xxx_get_vpd_field(vha, "\x82", ha->model_desc,
                    sizeof(ha->model_desc));
}

/* On sparc systems, obtain port and node WWN from firmware
 * properties.
 */
static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *vha, nvram_t *nv)
{
#ifdef CONFIG_SPARC
        struct qla_hw_data *ha = vha->hw;
        struct pci_dev *pdev = ha->pdev;
        struct device_node *dp = pci_device_to_OF_node(pdev);
        const u8 *val;
        int len;

        val = of_get_property(dp, "port-wwn", &len);
        if (val && len >= WWN_SIZE)
                memcpy(nv->port_name, val, WWN_SIZE);

        val = of_get_property(dp, "node-wwn", &len);
        if (val && len >= WWN_SIZE)
                memcpy(nv->node_name, val, WWN_SIZE);
#endif
}

/*
* NVRAM configuration for ISP 2xxx
*
* Input:
*      ha                = adapter block pointer.
*
* Output:
*      initialization control block in response_ring
*      host adapters parameters in host adapter block
*
* Returns:
*      0 = success.
*/
int
qla2x00_nvram_config(scsi_qla_host_t *vha)
{
        int             rval;
        uint8_t         chksum = 0;
        uint16_t        cnt;
        uint8_t         *dptr1, *dptr2;
        struct qla_hw_data *ha = vha->hw;
        init_cb_t       *icb = ha->init_cb;
        nvram_t         *nv = ha->nvram;
        uint8_t         *ptr = ha->nvram;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

        rval = QLA_SUCCESS;

        /* Determine NVRAM starting address. */
        ha->nvram_size = sizeof(nvram_t);
        ha->nvram_base = 0;
        if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha))
                if ((RD_REG_WORD(&reg->ctrl_status) >> 14) == 1)
                        ha->nvram_base = 0x80;

        /* Get NVRAM data and calculate checksum. */
        ha->isp_ops->read_nvram(vha, ptr, ha->nvram_base, ha->nvram_size);
        for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++)
                chksum += *ptr++;

        DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
        DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));

        /* Bad NVRAM data, set defaults parameters. */
        if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
            nv->id[2] != 'P' || nv->id[3] != ' ' || nv->nvram_version < 1) {
                /* Reset NVRAM data. */
                qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
                    "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
                    nv->nvram_version);
                qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
                    "invalid -- WWPN) defaults.\n");

                /*
                 * Set default initialization control block.
                 */
                memset(nv, 0, ha->nvram_size);
                nv->parameter_block_version = ICB_VERSION;

                if (IS_QLA23XX(ha)) {
                        nv->firmware_options[0] = BIT_2 | BIT_1;
                        nv->firmware_options[1] = BIT_7 | BIT_5;
                        nv->add_firmware_options[0] = BIT_5;
                        nv->add_firmware_options[1] = BIT_5 | BIT_4;
                        nv->frame_payload_size = __constant_cpu_to_le16(2048);
                        nv->special_options[1] = BIT_7;
                } else if (IS_QLA2200(ha)) {
                        nv->firmware_options[0] = BIT_2 | BIT_1;
                        nv->firmware_options[1] = BIT_7 | BIT_5;
                        nv->add_firmware_options[0] = BIT_5;
                        nv->add_firmware_options[1] = BIT_5 | BIT_4;
                        nv->frame_payload_size = __constant_cpu_to_le16(1024);
                } else if (IS_QLA2100(ha)) {
                        nv->firmware_options[0] = BIT_3 | BIT_1;
                        nv->firmware_options[1] = BIT_5;
                        nv->frame_payload_size = __constant_cpu_to_le16(1024);
                }

                nv->max_iocb_allocation = __constant_cpu_to_le16(256);
                nv->execution_throttle = __constant_cpu_to_le16(16);
                nv->retry_count = 8;
                nv->retry_delay = 1;

                nv->port_name[0] = 33;
                nv->port_name[3] = 224;
                nv->port_name[4] = 139;

                qla2xxx_nvram_wwn_from_ofw(vha, nv);

                nv->login_timeout = 4;

                /*
                 * Set default host adapter parameters
                 */
                nv->host_p[1] = BIT_2;
                nv->reset_delay = 5;
                nv->port_down_retry_count = 8;
                nv->max_luns_per_target = __constant_cpu_to_le16(8);
                nv->link_down_timeout = 60;

                rval = 1;
        }

#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
        /*
         * The SN2 does not provide BIOS emulation which means you can't change
         * potentially bogus BIOS settings. Force the use of default settings
         * for link rate and frame size.  Hope that the rest of the settings
         * are valid.
         */
        if (ia64_platform_is("sn2")) {
                nv->frame_payload_size = __constant_cpu_to_le16(2048);
                if (IS_QLA23XX(ha))
                        nv->special_options[1] = BIT_7;
        }
#endif

        /* Reset Initialization control block */
        memset(icb, 0, ha->init_cb_size);

        /*
         * Setup driver NVRAM options.
         */
        nv->firmware_options[0] |= (BIT_6 | BIT_1);
        nv->firmware_options[0] &= ~(BIT_5 | BIT_4);
        nv->firmware_options[1] |= (BIT_5 | BIT_0);
        nv->firmware_options[1] &= ~BIT_4;

        if (IS_QLA23XX(ha)) {
                nv->firmware_options[0] |= BIT_2;
                nv->firmware_options[0] &= ~BIT_3;
                nv->add_firmware_options[1] |= BIT_5 | BIT_4;

                if (IS_QLA2300(ha)) {
                        if (ha->fb_rev == FPM_2310) {
                                strcpy(ha->model_number, "QLA2310");
                        } else {
                                strcpy(ha->model_number, "QLA2300");
                        }
                } else {
                        qla2x00_set_model_info(vha, nv->model_number,
                            sizeof(nv->model_number), "QLA23xx");
                }
        } else if (IS_QLA2200(ha)) {
                nv->firmware_options[0] |= BIT_2;
                /*
                 * 'Point-to-point preferred, else loop' is not a safe
                 * connection mode setting.
                 */
                if ((nv->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) ==
                    (BIT_5 | BIT_4)) {
                        /* Force 'loop preferred, else point-to-point'. */
                        nv->add_firmware_options[0] &= ~(BIT_6 | BIT_5 | BIT_4);
                        nv->add_firmware_options[0] |= BIT_5;
                }
                strcpy(ha->model_number, "QLA22xx");
        } else /*if (IS_QLA2100(ha))*/ {
                strcpy(ha->model_number, "QLA2100");
        }

        /*
         * Copy over NVRAM RISC parameter block to initialization control block.
         */
        dptr1 = (uint8_t *)icb;
        dptr2 = (uint8_t *)&nv->parameter_block_version;
        cnt = (uint8_t *)&icb->request_q_outpointer - (uint8_t *)&icb->version;
        while (cnt--)
                *dptr1++ = *dptr2++;

        /* Copy 2nd half. */
        dptr1 = (uint8_t *)icb->add_firmware_options;
        cnt = (uint8_t *)icb->reserved_3 - (uint8_t *)icb->add_firmware_options;
        while (cnt--)
                *dptr1++ = *dptr2++;

        /* Use alternate WWN? */
        if (nv->host_p[1] & BIT_7) {
                memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
                memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
        }

        /* Prepare nodename */
        if ((icb->firmware_options[1] & BIT_6) == 0) {
                /*
                 * Firmware will apply the following mask if the nodename was
                 * not provided.
                 */
                memcpy(icb->node_name, icb->port_name, WWN_SIZE);
                icb->node_name[0] &= 0xF0;
        }

        /*
         * Set host adapter parameters.
         */
        if (nv->host_p[0] & BIT_7)
                ql2xextended_error_logging = 1;
        ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
        /* Always load RISC code on non ISP2[12]00 chips. */
        if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
                ha->flags.disable_risc_code_load = 0;
        ha->flags.enable_lip_reset = ((nv->host_p[1] & BIT_1) ? 1 : 0);
        ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0);
        ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0);
        ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0;
        ha->flags.disable_serdes = 0;

        ha->operating_mode =
            (icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4;

        memcpy(ha->fw_seriallink_options, nv->seriallink_options,
            sizeof(ha->fw_seriallink_options));

        /* save HBA serial number */
        ha->serial0 = icb->port_name[5];
        ha->serial1 = icb->port_name[6];
        ha->serial2 = icb->port_name[7];
        memcpy(vha->node_name, icb->node_name, WWN_SIZE);
        memcpy(vha->port_name, icb->port_name, WWN_SIZE);

        icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);

        ha->retry_count = nv->retry_count;

        /* Set minimum login_timeout to 4 seconds. */
        if (nv->login_timeout < ql2xlogintimeout)
                nv->login_timeout = ql2xlogintimeout;
        if (nv->login_timeout < 4)
                nv->login_timeout = 4;
        ha->login_timeout = nv->login_timeout;
        icb->login_timeout = nv->login_timeout;

        /* Set minimum RATOV to 100 tenths of a second. */
        ha->r_a_tov = 100;

        ha->loop_reset_delay = nv->reset_delay;

        /* Link Down Timeout = 0:
         *
         *      When Port Down timer expires we will start returning
         *      I/O's to OS with "DID_NO_CONNECT".
         *
         * Link Down Timeout != 0:
         *
         *       The driver waits for the link to come up after link down
         *       before returning I/Os to OS with "DID_NO_CONNECT".
         */
        if (nv->link_down_timeout == 0) {
                ha->loop_down_abort_time =
                    (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
        } else {
                ha->link_down_timeout =  nv->link_down_timeout;
                ha->loop_down_abort_time =
                    (LOOP_DOWN_TIME - ha->link_down_timeout);
        }

        /*
         * Need enough time to try and get the port back.
         */
        ha->port_down_retry_count = nv->port_down_retry_count;
        if (qlport_down_retry)
                ha->port_down_retry_count = qlport_down_retry;
        /* Set login_retry_count */
        ha->login_retry_count  = nv->retry_count;
        if (ha->port_down_retry_count == nv->port_down_retry_count &&
            ha->port_down_retry_count > 3)
                ha->login_retry_count = ha->port_down_retry_count;
        else if (ha->port_down_retry_count > (int)ha->login_retry_count)
                ha->login_retry_count = ha->port_down_retry_count;
        if (ql2xloginretrycount)
                ha->login_retry_count = ql2xloginretrycount;

        icb->lun_enables = __constant_cpu_to_le16(0);
        icb->command_resource_count = 0;
        icb->immediate_notify_resource_count = 0;
        icb->timeout = __constant_cpu_to_le16(0);

        if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
                /* Enable RIO */
                icb->firmware_options[0] &= ~BIT_3;
                icb->add_firmware_options[0] &=
                    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
                icb->add_firmware_options[0] |= BIT_2;
                icb->response_accumulation_timer = 3;
                icb->interrupt_delay_timer = 5;

                vha->flags.process_response_queue = 1;
        } else {
                /* Enable ZIO. */
                if (!vha->flags.init_done) {
                        ha->zio_mode = icb->add_firmware_options[0] &
                            (BIT_3 | BIT_2 | BIT_1 | BIT_0);
                        ha->zio_timer = icb->interrupt_delay_timer ?
                            icb->interrupt_delay_timer: 2;
                }
                icb->add_firmware_options[0] &=
                    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
                vha->flags.process_response_queue = 0;
                if (ha->zio_mode != QLA_ZIO_DISABLED) {
                        ha->zio_mode = QLA_ZIO_MODE_6;

                        DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer "
                            "delay (%d us).\n", vha->host_no, ha->zio_mode,
                            ha->zio_timer * 100));
                        qla_printk(KERN_INFO, ha,
                            "ZIO mode %d enabled; timer delay (%d us).\n",
                            ha->zio_mode, ha->zio_timer * 100);

                        icb->add_firmware_options[0] |= (uint8_t)ha->zio_mode;
                        icb->interrupt_delay_timer = (uint8_t)ha->zio_timer;
                        vha->flags.process_response_queue = 1;
                }
        }

        if (rval) {
                DEBUG2_3(printk(KERN_WARNING
                    "scsi(%ld): NVRAM configuration failed!\n", vha->host_no));
        }
        return (rval);
}

static void
qla2x00_rport_del(void *data)
{
        fc_port_t *fcport = data;
        struct fc_rport *rport;

        spin_lock_irq(fcport->vha->host->host_lock);
        rport = fcport->drport;
        fcport->drport = NULL;
        spin_unlock_irq(fcport->vha->host->host_lock);
        if (rport)
                fc_remote_port_delete(rport);
}

/**
 * qla2x00_alloc_fcport() - Allocate a generic fcport.
 * @ha: HA context
 * @flags: allocation flags
 *
 * Returns a pointer to the allocated fcport, or NULL, if none available.
 */
static fc_port_t *
qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
{
        fc_port_t *fcport;

        fcport = kzalloc(sizeof(fc_port_t), flags);
        if (!fcport)
                return NULL;

        /* Setup fcport template structure. */
        fcport->vha = vha;
        fcport->vp_idx = vha->vp_idx;
        fcport->port_type = FCT_UNKNOWN;
        fcport->loop_id = FC_NO_LOOP_ID;
        atomic_set(&fcport->state, FCS_UNCONFIGURED);
        fcport->flags = FCF_RLC_SUPPORT;
        fcport->supported_classes = FC_COS_UNSPECIFIED;

        return fcport;
}

/*
 * qla2x00_configure_loop
 *      Updates Fibre Channel Device Database with what is actually on loop.
 *
 * Input:
 *      ha                = adapter block pointer.
 *
 * Returns:
 *      0 = success.
 *      1 = error.
 *      2 = database was full and device was not configured.
 */
static int
qla2x00_configure_loop(scsi_qla_host_t *vha)
{
        int  rval;
        unsigned long flags, save_flags;
        struct qla_hw_data *ha = vha->hw;
        rval = QLA_SUCCESS;

        /* Get Initiator ID */
        if (test_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags)) {
                rval = qla2x00_configure_hba(vha);
                if (rval != QLA_SUCCESS) {
                        DEBUG(printk("scsi(%ld): Unable to configure HBA.\n",
                            vha->host_no));
                        return (rval);
                }
        }

        save_flags = flags = vha->dpc_flags;
        DEBUG(printk("scsi(%ld): Configure loop -- dpc flags =0x%lx\n",
            vha->host_no, flags));

        /*
         * If we have both an RSCN and PORT UPDATE pending then handle them
         * both at the same time.
         */
        clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
        clear_bit(RSCN_UPDATE, &vha->dpc_flags);

        /* Determine what we need to do */
        if (ha->current_topology == ISP_CFG_FL &&
            (test_bit(LOCAL_LOOP_UPDATE, &flags))) {

                vha->flags.rscn_queue_overflow = 1;
                set_bit(RSCN_UPDATE, &flags);

        } else if (ha->current_topology == ISP_CFG_F &&
            (test_bit(LOCAL_LOOP_UPDATE, &flags))) {

                vha->flags.rscn_queue_overflow = 1;
                set_bit(RSCN_UPDATE, &flags);
                clear_bit(LOCAL_LOOP_UPDATE, &flags);

        } else if (ha->current_topology == ISP_CFG_N) {
                clear_bit(RSCN_UPDATE, &flags);

        } else if (!vha->flags.online ||
            (test_bit(ABORT_ISP_ACTIVE, &flags))) {

                vha->flags.rscn_queue_overflow = 1;
                set_bit(RSCN_UPDATE, &flags);
                set_bit(LOCAL_LOOP_UPDATE, &flags);
        }

        if (test_bit(LOCAL_LOOP_UPDATE, &flags)) {
                if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
                        rval = QLA_FUNCTION_FAILED;
                else
                        rval = qla2x00_configure_local_loop(vha);
        }

        if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
                if (LOOP_TRANSITION(vha))
                        rval = QLA_FUNCTION_FAILED;
                else
                        rval = qla2x00_configure_fabric(vha);
        }

        if (rval == QLA_SUCCESS) {
                if (atomic_read(&vha->loop_down_timer) ||
                    test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
                        rval = QLA_FUNCTION_FAILED;
                } else {
                        atomic_set(&vha->loop_state, LOOP_READY);

                        DEBUG(printk("scsi(%ld): LOOP READY\n", vha->host_no));
                }
        }

        if (rval) {
                DEBUG2_3(printk("%s(%ld): *** FAILED ***\n",
                    __func__, vha->host_no));
        } else {
                DEBUG3(printk("%s: exiting normally\n", __func__));
        }

        /* Restore state if a resync event occurred during processing */
        if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
                if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
                        set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
                if (test_bit(RSCN_UPDATE, &save_flags))
                        set_bit(RSCN_UPDATE, &vha->dpc_flags);
        }

        return (rval);
}



/*
 * qla2x00_configure_local_loop
 *      Updates Fibre Channel Device Database with local loop devices.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      0 = success.
 */
static int
qla2x00_configure_local_loop(scsi_qla_host_t *vha)
{
        int             rval, rval2;
        int             found_devs;
        int             found;
        fc_port_t       *fcport, *new_fcport;

        uint16_t        index;
        uint16_t        entries;
        char            *id_iter;
        uint16_t        loop_id;
        uint8_t         domain, area, al_pa;
        struct qla_hw_data *ha = vha->hw;

        found_devs = 0;
        new_fcport = NULL;
        entries = MAX_FIBRE_DEVICES;

        DEBUG3(printk("scsi(%ld): Getting FCAL position map\n", vha->host_no));
        DEBUG3(qla2x00_get_fcal_position_map(vha, NULL));

        /* Get list of logged in devices. */
        memset(ha->gid_list, 0, GID_LIST_SIZE);
        rval = qla2x00_get_id_list(vha, ha->gid_list, ha->gid_list_dma,
            &entries);
        if (rval != QLA_SUCCESS)
                goto cleanup_allocation;

        DEBUG3(printk("scsi(%ld): Entries in ID list (%d)\n",
            ha->host_no, entries));
        DEBUG3(qla2x00_dump_buffer((uint8_t *)ha->gid_list,
            entries * sizeof(struct gid_list_info)));

        /* Allocate temporary fcport for any new fcports discovered. */
        new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
        if (new_fcport == NULL) {
                rval = QLA_MEMORY_ALLOC_FAILED;
                goto cleanup_allocation;
        }
        new_fcport->flags &= ~FCF_FABRIC_DEVICE;

        /*
         * Mark local devices that were present with FCF_DEVICE_LOST for now.
         */
        list_for_each_entry(fcport, &vha->vp_fcports, list) {
                if (atomic_read(&fcport->state) == FCS_ONLINE &&
                    fcport->port_type != FCT_BROADCAST &&
                    (fcport->flags & FCF_FABRIC_DEVICE) == 0) {

                        DEBUG(printk("scsi(%ld): Marking port lost, "
                            "loop_id=0x%04x\n",
                            vha->host_no, fcport->loop_id));

                        atomic_set(&fcport->state, FCS_DEVICE_LOST);
                        fcport->flags &= ~FCF_FARP_DONE;
                }
        }

        /* Add devices to port list. */
        id_iter = (char *)ha->gid_list;
        for (index = 0; index < entries; index++) {
                domain = ((struct gid_list_info *)id_iter)->domain;
                area = ((struct gid_list_info *)id_iter)->area;
                al_pa = ((struct gid_list_info *)id_iter)->al_pa;
                if (IS_QLA2100(ha) || IS_QLA2200(ha))
                        loop_id = (uint16_t)
                            ((struct gid_list_info *)id_iter)->loop_id_2100;
                else
                        loop_id = le16_to_cpu(
                            ((struct gid_list_info *)id_iter)->loop_id);
                id_iter += ha->gid_list_info_size;

                /* Bypass reserved domain fields. */
                if ((domain & 0xf0) == 0xf0)
                        continue;

                /* Bypass if not same domain and area of adapter. */
                if (area && domain &&
                    (area != vha->d_id.b.area || domain != vha->d_id.b.domain))
                        continue;

                /* Bypass invalid local loop ID. */
                if (loop_id > LAST_LOCAL_LOOP_ID)
                        continue;

                /* Fill in member data. */
                new_fcport->d_id.b.domain = domain;
                new_fcport->d_id.b.area = area;
                new_fcport->d_id.b.al_pa = al_pa;
                new_fcport->loop_id = loop_id;
                new_fcport->vp_idx = vha->vp_idx;
                rval2 = qla2x00_get_port_database(vha, new_fcport, 0);
                if (rval2 != QLA_SUCCESS) {
                        DEBUG2(printk("scsi(%ld): Failed to retrieve fcport "
                            "information -- get_port_database=%x, "
                            "loop_id=0x%04x\n",
                            vha->host_no, rval2, new_fcport->loop_id));
                        DEBUG2(printk("scsi(%ld): Scheduling resync...\n",
                            vha->host_no));
                        set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
                        continue;
                }

                /* Check for matching device in port list. */
                found = 0;
                fcport = NULL;
                list_for_each_entry(fcport, &vha->vp_fcports, list) {
                        if (memcmp(new_fcport->port_name, fcport->port_name,
                            WWN_SIZE))
                                continue;

                        fcport->flags &= ~(FCF_FABRIC_DEVICE |
                            FCF_PERSISTENT_BOUND);
                        fcport->loop_id = new_fcport->loop_id;
                        fcport->port_type = new_fcport->port_type;
                        fcport->d_id.b24 = new_fcport->d_id.b24;
                        memcpy(fcport->node_name, new_fcport->node_name,
                            WWN_SIZE);

                        found++;
                        break;
                }

                if (!found) {
                        /* New device, add to fcports list. */
                        new_fcport->flags &= ~FCF_PERSISTENT_BOUND;
                        if (vha->vp_idx) {
                                new_fcport->vha = vha;
                                new_fcport->vp_idx = vha->vp_idx;
                        }
                        list_add_tail(&new_fcport->list, &vha->vp_fcports);

                        /* Allocate a new replacement fcport. */
                        fcport = new_fcport;
                        new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
                        if (new_fcport == NULL) {
                                rval = QLA_MEMORY_ALLOC_FAILED;
                                goto cleanup_allocation;
                        }
                        new_fcport->flags &= ~FCF_FABRIC_DEVICE;
                }

                /* Base iIDMA settings on HBA port speed. */
                fcport->fp_speed = ha->link_data_rate;

                qla2x00_update_fcport(vha, fcport);

                found_devs++;
        }

cleanup_allocation:
        kfree(new_fcport);

        if (rval != QLA_SUCCESS) {
                DEBUG2(printk("scsi(%ld): Configure local loop error exit: "
                    "rval=%x\n", vha->host_no, rval));
        }

        if (found_devs) {
                vha->device_flags |= DFLG_LOCAL_DEVICES;
                vha->device_flags &= ~DFLG_RETRY_LOCAL_DEVICES;
        }

        return (rval);
}

static void
qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
{
#define LS_UNKNOWN      2
        static char *link_speeds[5] = { "1", "2", "?", "4", "8" };
        int rval;
        uint16_t mb[6];
        struct qla_hw_data *ha = vha->hw;

        if (!IS_IIDMA_CAPABLE(ha))
                return;

        if (fcport->fp_speed == PORT_SPEED_UNKNOWN ||
            fcport->fp_speed > ha->link_data_rate)
                return;

        rval = qla2x00_set_idma_speed(vha, fcport->loop_id, fcport->fp_speed,
            mb);
        if (rval != QLA_SUCCESS) {
                DEBUG2(printk("scsi(%ld): Unable to adjust iIDMA "
                    "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x %04x.\n",
                    vha->host_no, fcport->port_name[0], fcport->port_name[1],
                    fcport->port_name[2], fcport->port_name[3],
                    fcport->port_name[4], fcport->port_name[5],
                    fcport->port_name[6], fcport->port_name[7], rval,
                    fcport->fp_speed, mb[0], mb[1]));
        } else {
                DEBUG2(qla_printk(KERN_INFO, ha,
                    "iIDMA adjusted to %s GB/s on "
                    "%02x%02x%02x%02x%02x%02x%02x%02x.\n",
                    link_speeds[fcport->fp_speed], fcport->port_name[0],
                    fcport->port_name[1], fcport->port_name[2],
                    fcport->port_name[3], fcport->port_name[4],
                    fcport->port_name[5], fcport->port_name[6],
                    fcport->port_name[7]));
        }
}

static void
qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport)
{
        struct fc_rport_identifiers rport_ids;
        struct fc_rport *rport;
        struct qla_hw_data *ha = vha->hw;

        if (fcport->drport)
                qla2x00_rport_del(fcport);

        rport_ids.node_name = wwn_to_u64(fcport->node_name);
        rport_ids.port_name = wwn_to_u64(fcport->port_name);
        rport_ids.port_id = fcport->d_id.b.domain << 16 |
            fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
        rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
        fcport->rport = rport = fc_remote_port_add(vha->host, 0, &rport_ids);
        if (!rport) {
                qla_printk(KERN_WARNING, ha,
                    "Unable to allocate fc remote port!\n");
                return;
        }
        spin_lock_irq(fcport->vha->host->host_lock);
        *((fc_port_t **)rport->dd_data) = fcport;
        spin_unlock_irq(fcport->vha->host->host_lock);

        rport->supported_classes = fcport->supported_classes;

        rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
        if (fcport->port_type == FCT_INITIATOR)
                rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
        if (fcport->port_type == FCT_TARGET)
                rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
        fc_remote_port_rolechg(rport, rport_ids.roles);
}

/*
 * qla2x00_update_fcport
 *      Updates device on list.
 *
 * Input:
 *      ha = adapter block pointer.
 *      fcport = port structure pointer.
 *
 * Return:
 *      0  - Success
 *  BIT_0 - error
 *
 * Context:
 *      Kernel context.
 */
void
qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
{
        struct qla_hw_data *ha = vha->hw;

        fcport->vha = vha;
        fcport->login_retry = 0;
        fcport->port_login_retry_count = ha->port_down_retry_count *
            PORT_RETRY_TIME;
        atomic_set(&fcport->port_down_timer, ha->port_down_retry_count *
            PORT_RETRY_TIME);
        fcport->flags &= ~FCF_LOGIN_NEEDED;

        qla2x00_iidma_fcport(vha, fcport);

        atomic_set(&fcport->state, FCS_ONLINE);

        qla2x00_reg_remote_port(vha, fcport);
}

/*
 * qla2x00_configure_fabric
 *      Setup SNS devices with loop ID's.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      0 = success.
 *      BIT_0 = error
 */
static int
qla2x00_configure_fabric(scsi_qla_host_t *vha)
{
        int     rval, rval2;
        fc_port_t       *fcport, *fcptemp;
        uint16_t        next_loopid;
        uint16_t        mb[MAILBOX_REGISTER_COUNT];
        uint16_t        loop_id;
        LIST_HEAD(new_fcports);
        struct qla_hw_data *ha = vha->hw;
        struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);

        /* If FL port exists, then SNS is present */
        if (IS_FWI2_CAPABLE(ha))
                loop_id = NPH_F_PORT;
        else
                loop_id = SNS_FL_PORT;
        rval = qla2x00_get_port_name(vha, loop_id, vha->fabric_node_name, 1);
        if (rval != QLA_SUCCESS) {
                DEBUG2(printk("scsi(%ld): MBC_GET_PORT_NAME Failed, No FL "
                    "Port\n", vha->host_no));

                vha->device_flags &= ~SWITCH_FOUND;
                return (QLA_SUCCESS);
        }
        vha->device_flags |= SWITCH_FOUND;

        /* Mark devices that need re-synchronization. */
        rval2 = qla2x00_device_resync(vha);
        if (rval2 == QLA_RSCNS_HANDLED) {
                /* No point doing the scan, just continue. */
                return (QLA_SUCCESS);
        }
        do {
                /* FDMI support. */
                if (ql2xfdmienable &&
                    test_and_clear_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags))
                        qla2x00_fdmi_register(vha);

                /* Ensure we are logged into the SNS. */
                if (IS_FWI2_CAPABLE(ha))
                        loop_id = NPH_SNS;
                else
                        loop_id = SIMPLE_NAME_SERVER;
                ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff,
                    0xfc, mb, BIT_1 | BIT_0);
                if (mb[0] != MBS_COMMAND_COMPLETE) {
                        DEBUG2(qla_printk(KERN_INFO, ha,
                            "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
                            "mb[2]=%x mb[6]=%x mb[7]=%x\n", loop_id,
                            mb[0], mb[1], mb[2], mb[6], mb[7]));
                        return (QLA_SUCCESS);
                }

                if (test_and_clear_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags)) {
                        if (qla2x00_rft_id(vha)) {
                                /* EMPTY */
                                DEBUG2(printk("scsi(%ld): Register FC-4 "
                                    "TYPE failed.\n", vha->host_no));
                        }
                        if (qla2x00_rff_id(vha)) {
                                /* EMPTY */
                                DEBUG2(printk("scsi(%ld): Register FC-4 "
                                    "Features failed.\n", vha->host_no));
                        }
                        if (qla2x00_rnn_id(vha)) {
                                /* EMPTY */
                                DEBUG2(printk("scsi(%ld): Register Node Name "
                                    "failed.\n", vha->host_no));
                        } else if (qla2x00_rsnn_nn(vha)) {
                                /* EMPTY */
                                DEBUG2(printk("scsi(%ld): Register Symbolic "
                                    "Node Name failed.\n", vha->host_no));
                        }
                }

                rval = qla2x00_find_all_fabric_devs(vha, &new_fcports);
                if (rval != QLA_SUCCESS)
                        break;

                /*
                 * Logout all previous fabric devices marked lost, except
                 * tape devices.
                 */
                list_for_each_entry(fcport, &vha->vp_fcports, list) {
                        if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
                                break;

                        if ((fcport->flags & FCF_FABRIC_DEVICE) == 0)
                                continue;

                        if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
                                qla2x00_mark_device_lost(vha, fcport,
                                    ql2xplogiabsentdevice, 0);
                                if (fcport->loop_id != FC_NO_LOOP_ID &&
                                    (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
                                    fcport->port_type != FCT_INITIATOR &&
                                    fcport->port_type != FCT_BROADCAST) {
                                        ha->isp_ops->fabric_logout(vha,
                                            fcport->loop_id,
                                            fcport->d_id.b.domain,
                                            fcport->d_id.b.area,
                                            fcport->d_id.b.al_pa);
                                        fcport->loop_id = FC_NO_LOOP_ID;
                                }
                        }
                }

                /* Starting free loop ID. */
                next_loopid = ha->min_external_loopid;

                /*
                 * Scan through our port list and login entries that need to be
                 * logged in.
                 */
                list_for_each_entry(fcport, &vha->vp_fcports, list) {
                        if (atomic_read(&vha->loop_down_timer) ||
                            test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
                                break;

                        if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
                            (fcport->flags & FCF_LOGIN_NEEDED) == 0)
                                continue;

                        if (fcport->loop_id == FC_NO_LOOP_ID) {
                                fcport->loop_id = next_loopid;
                                rval = qla2x00_find_new_loop_id(
                                    base_vha, fcport);
                                if (rval != QLA_SUCCESS) {
                                        /* Ran out of IDs to use */
                                        break;
                                }
                        }
                        /* Login and update database */
                        qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
                }

                /* Exit if out of loop IDs. */
                if (rval != QLA_SUCCESS) {
                        break;
                }

                /*
                 * Login and add the new devices to our port list.
                 */
                list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
                        if (atomic_read(&vha->loop_down_timer) ||
                            test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
                                break;

                        /* Find a new loop ID to use. */
                        fcport->loop_id = next_loopid;
                        rval = qla2x00_find_new_loop_id(base_vha, fcport);
                        if (rval != QLA_SUCCESS) {
                                /* Ran out of IDs to use */
                                break;
                        }

                        /* Login and update database */
                        qla2x00_fabric_dev_login(vha, fcport, &next_loopid);

                        if (vha->vp_idx) {
                                fcport->vha = vha;
                                fcport->vp_idx = vha->vp_idx;
                        }
                        list_move_tail(&fcport->list, &vha->vp_fcports);
                }
        } while (0);

        /* Free all new device structures not processed. */
        list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
                list_del(&fcport->list);
                kfree(fcport);
        }

        if (rval) {
                DEBUG2(printk("scsi(%ld): Configure fabric error exit: "
                    "rval=%d\n", vha->host_no, rval));
        }

        return (rval);
}


/*
 * qla2x00_find_all_fabric_devs
 *
 * Input:
 *      ha = adapter block pointer.
 *      dev = database device entry pointer.
 *
 * Returns:
 *      0 = success.
 *
 * Context:
 *      Kernel context.
 */
static int
qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
        struct list_head *new_fcports)
{
        int             rval;
        uint16_t        loop_id;
        fc_port_t       *fcport, *new_fcport, *fcptemp;
        int             found;

        sw_info_t       *swl;
        int             swl_idx;
        int             first_dev, last_dev;
        port_id_t       wrap, nxt_d_id;
        struct qla_hw_data *ha = vha->hw;
        struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev);

        rval = QLA_SUCCESS;

        /* Try GID_PT to get device list, else GAN. */
        swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_KERNEL);
        if (!swl) {
                /*EMPTY*/
                DEBUG2(printk("scsi(%ld): GID_PT allocations failed, fallback "
                    "on GA_NXT\n", vha->host_no));
        } else {
                if (qla2x00_gid_pt(vha, swl) != QLA_SUCCESS) {
                        kfree(swl);
                        swl = NULL;
                } else if (qla2x00_gpn_id(vha, swl) != QLA_SUCCESS) {
                        kfree(swl);
                        swl = NULL;
                } else if (qla2x00_gnn_id(vha, swl) != QLA_SUCCESS) {
                        kfree(swl);
                        swl = NULL;
                } else if (ql2xiidmaenable &&
                    qla2x00_gfpn_id(vha, swl) == QLA_SUCCESS) {
                        qla2x00_gpsc(vha, swl);
                }
        }
        swl_idx = 0;

        /* Allocate temporary fcport for any new fcports discovered. */
        new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
        if (new_fcport == NULL) {
                kfree(swl);
                return (QLA_MEMORY_ALLOC_FAILED);
        }
        new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
        /* Set start port ID scan at adapter ID. */
        first_dev = 1;
        last_dev = 0;

        /* Starting free loop ID. */
        loop_id = ha->min_external_loopid;
        for (; loop_id <= ha->max_loop_id; loop_id++) {
                if (qla2x00_is_reserved_id(vha, loop_id))
                        continue;

                if (atomic_read(&vha->loop_down_timer) || LOOP_TRANSITION(vha))
                        break;

                if (swl != NULL) {
                        if (last_dev) {
                                wrap.b24 = new_fcport->d_id.b24;
                        } else {
                                new_fcport->d_id.b24 = swl[swl_idx].d_id.b24;
                                memcpy(new_fcport->node_name,
                                    swl[swl_idx].node_name, WWN_SIZE);
                                memcpy(new_fcport->port_name,
                                    swl[swl_idx].port_name, WWN_SIZE);
                                memcpy(new_fcport->fabric_port_name,
                                    swl[swl_idx].fabric_port_name, WWN_SIZE);
                                new_fcport->fp_speed = swl[swl_idx].fp_speed;

                                if (swl[swl_idx].d_id.b.rsvd_1 != 0) {
                                        last_dev = 1;
                                }
                                swl_idx++;
                        }
                } else {
                        /* Send GA_NXT to the switch */
                        rval = qla2x00_ga_nxt(vha, new_fcport);
                        if (rval != QLA_SUCCESS) {
                                qla_printk(KERN_WARNING, ha,
                                    "SNS scan failed -- assuming zero-entry "
                                    "result...\n");
                                list_for_each_entry_safe(fcport, fcptemp,
                                    new_fcports, list) {
                                        list_del(&fcport->list);
                                        kfree(fcport);
                                }
                                rval = QLA_SUCCESS;
                                break;
                        }
                }

                /* If wrap on switch device list, exit. */
                if (first_dev) {
                        wrap.b24 = new_fcport->d_id.b24;
                        first_dev = 0;
                } else if (new_fcport->d_id.b24 == wrap.b24) {
                        DEBUG2(printk("scsi(%ld): device wrap (%02x%02x%02x)\n",
                            vha->host_no, new_fcport->d_id.b.domain,
                            new_fcport->d_id.b.area, new_fcport->d_id.b.al_pa));
                        break;
                }

                /* Bypass if same physical adapter. */
                if (new_fcport->d_id.b24 == base_vha->d_id.b24)
                        continue;

                /* Bypass virtual ports of the same host. */
                found = 0;
                if (ha->num_vhosts) {
                        list_for_each_entry(vp, &ha->vp_list, list) {
                                if (new_fcport->d_id.b24 == vp->d_id.b24) {
                                        found = 1;
                                        break;
                                }
                        }
                        if (found)
                                continue;
                }

                /* Bypass if same domain and area of adapter. */
                if (((new_fcport->d_id.b24 & 0xffff00) ==
                    (vha->d_id.b24 & 0xffff00)) && ha->current_topology ==
                        ISP_CFG_FL)
                            continue;

                /* Bypass reserved domain fields. */
                if ((new_fcport->d_id.b.domain & 0xf0) == 0xf0)
                        continue;

                /* Locate matching device in database. */
                found = 0;
                list_for_each_entry(fcport, &vha->vp_fcports, list) {
                        if (memcmp(new_fcport->port_name, fcport->port_name,
                            WWN_SIZE))
                                continue;

                        found++;

                        /* Update port state. */
                        memcpy(fcport->fabric_port_name,
                            new_fcport->fabric_port_name, WWN_SIZE);
                        fcport->fp_speed = new_fcport->fp_speed;

                        /*
                         * If address the same and state FCS_ONLINE, nothing
                         * changed.
                         */
                        if (fcport->d_id.b24 == new_fcport->d_id.b24 &&
                            atomic_read(&fcport->state) == FCS_ONLINE) {
                                break;
                        }

                        /*
                         * If device was not a fabric device before.
                         */
                        if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) {
                                fcport->d_id.b24 = new_fcport->d_id.b24;
                                fcport->loop_id = FC_NO_LOOP_ID;
                                fcport->flags |= (FCF_FABRIC_DEVICE |
                                    FCF_LOGIN_NEEDED);
                                fcport->flags &= ~FCF_PERSISTENT_BOUND;
                                break;
                        }

                        /*
                         * Port ID changed or device was marked to be updated;
                         * Log it out if still logged in and mark it for
                         * relogin later.
                         */
                        fcport->d_id.b24 = new_fcport->d_id.b24;
                        fcport->flags |= FCF_LOGIN_NEEDED;
                        if (fcport->loop_id != FC_NO_LOOP_ID &&
                            (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
                            fcport->port_type != FCT_INITIATOR &&
                            fcport->port_type != FCT_BROADCAST) {
                                ha->isp_ops->fabric_logout(vha, fcport->loop_id,
                                    fcport->d_id.b.domain, fcport->d_id.b.area,
                                    fcport->d_id.b.al_pa);
                                fcport->loop_id = FC_NO_LOOP_ID;
                        }

                        break;
                }

                if (found)
                        continue;
                /* If device was not in our fcports list, then add it. */
                list_add_tail(&new_fcport->list, new_fcports);

                /* Allocate a new replacement fcport. */
                nxt_d_id.b24 = new_fcport->d_id.b24;
                new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
                if (new_fcport == NULL) {
                        kfree(swl);
                        return (QLA_MEMORY_ALLOC_FAILED);
                }
                new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
                new_fcport->d_id.b24 = nxt_d_id.b24;
        }

        kfree(swl);
        kfree(new_fcport);

        if (!list_empty(new_fcports))
                vha->device_flags |= DFLG_FABRIC_DEVICES;

        return (rval);
}

/*
 * qla2x00_find_new_loop_id
 *      Scan through our port list and find a new usable loop ID.
 *
 * Input:
 *      ha:     adapter state pointer.
 *      dev:    port structure pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
static int
qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
{
        int     rval;
        int     found;
        fc_port_t *fcport;
        uint16_t first_loop_id;
        struct qla_hw_data *ha = vha->hw;
        struct scsi_qla_host *vp;

        rval = QLA_SUCCESS;

        /* Save starting loop ID. */
        first_loop_id = dev->loop_id;

        for (;;) {
                /* Skip loop ID if already used by adapter. */
                if (dev->loop_id == vha->loop_id)
                        dev->loop_id++;

                /* Skip reserved loop IDs. */
                while (qla2x00_is_reserved_id(vha, dev->loop_id))
                        dev->loop_id++;

                /* Reset loop ID if passed the end. */
                if (dev->loop_id > ha->max_loop_id) {
                        /* first loop ID. */
                        dev->loop_id = ha->min_external_loopid;
                }

                /* Check for loop ID being already in use. */
                found = 0;
                fcport = NULL;
                list_for_each_entry(vp, &ha->vp_list, list) {
                        list_for_each_entry(fcport, &vp->vp_fcports, list) {
                                if (fcport->loop_id == dev->loop_id &&
                                                                fcport != dev) {
                                        /* ID possibly in use */
                                        found++;
                                        break;
                                }
                        }
                        if (found)
                                break;
                }

                /* If not in use then it is free to use. */
                if (!found) {
                        break;
                }

                /* ID in use. Try next value. */
                dev->loop_id++;

                /* If wrap around. No free ID to use. */
                if (dev->loop_id == first_loop_id) {
                        dev->loop_id = FC_NO_LOOP_ID;
                        rval = QLA_FUNCTION_FAILED;
                        break;
                }
        }

        return (rval);
}

/*
 * qla2x00_device_resync
 *      Marks devices in the database that needs resynchronization.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Context:
 *      Kernel context.
 */
static int
qla2x00_device_resync(scsi_qla_host_t *vha)
{
        int     rval;
        uint32_t mask;
        fc_port_t *fcport;
        uint32_t rscn_entry;
        uint8_t rscn_out_iter;
        uint8_t format;
        port_id_t d_id;

        rval = QLA_RSCNS_HANDLED;

        while (vha->rscn_out_ptr != vha->rscn_in_ptr ||
            vha->flags.rscn_queue_overflow) {

                rscn_entry = vha->rscn_queue[vha->rscn_out_ptr];
                format = MSB(MSW(rscn_entry));
                d_id.b.domain = LSB(MSW(rscn_entry));
                d_id.b.area = MSB(LSW(rscn_entry));
                d_id.b.al_pa = LSB(LSW(rscn_entry));

                DEBUG(printk("scsi(%ld): RSCN queue entry[%d] = "
                    "[%02x/%02x%02x%02x].\n",
                    vha->host_no, vha->rscn_out_ptr, format, d_id.b.domain,
                    d_id.b.area, d_id.b.al_pa));

                vha->rscn_out_ptr++;
                if (vha->rscn_out_ptr == MAX_RSCN_COUNT)
                        vha->rscn_out_ptr = 0;

                /* Skip duplicate entries. */
                for (rscn_out_iter = vha->rscn_out_ptr;
                    !vha->flags.rscn_queue_overflow &&
                    rscn_out_iter != vha->rscn_in_ptr;
                    rscn_out_iter = (rscn_out_iter ==
                        (MAX_RSCN_COUNT - 1)) ? 0: rscn_out_iter + 1) {

                        if (rscn_entry != vha->rscn_queue[rscn_out_iter])
                                break;

                        DEBUG(printk("scsi(%ld): Skipping duplicate RSCN queue "
                            "entry found at [%d].\n", vha->host_no,
                            rscn_out_iter));

                        vha->rscn_out_ptr = rscn_out_iter;
                }

                /* Queue overflow, set switch default case. */
                if (vha->flags.rscn_queue_overflow) {
                        DEBUG(printk("scsi(%ld): device_resync: rscn "
                            "overflow.\n", vha->host_no));

                        format = 3;
                        vha->flags.rscn_queue_overflow = 0;
                }

                switch (format) {
                case 0:
                        mask = 0xffffff;
                        break;
                case 1:
                        mask = 0xffff00;
                        break;
                case 2:
                        mask = 0xff0000;
                        break;
                default:
                        mask = 0x0;
                        d_id.b24 = 0;
                        vha->rscn_out_ptr = vha->rscn_in_ptr;
                        break;
                }

                rval = QLA_SUCCESS;

                list_for_each_entry(fcport, &vha->vp_fcports, list) {
                        if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
                            (fcport->d_id.b24 & mask) != d_id.b24 ||
                            fcport->port_type == FCT_BROADCAST)
                                continue;

                        if (atomic_read(&fcport->state) == FCS_ONLINE) {
                                if (format != 3 ||
                                    fcport->port_type != FCT_INITIATOR) {
                                        qla2x00_mark_device_lost(vha, fcport,
                                            0, 0);
                                }
                        }
                        fcport->flags &= ~FCF_FARP_DONE;
                }
        }
        return (rval);
}

/*
 * qla2x00_fabric_dev_login
 *      Login fabric target device and update FC port database.
 *
 * Input:
 *      ha:             adapter state pointer.
 *      fcport:         port structure list pointer.
 *      next_loopid:    contains value of a new loop ID that can be used
 *                      by the next login attempt.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
static int
qla2x00_fabric_dev_login(scsi_qla_host_t *vha, fc_port_t *fcport,
    uint16_t *next_loopid)
{
        int     rval;
        int     retry;
        uint8_t opts;
        struct qla_hw_data *ha = vha->hw;

        rval = QLA_SUCCESS;
        retry = 0;

        rval = qla2x00_fabric_login(vha, fcport, next_loopid);
        if (rval == QLA_SUCCESS) {
                /* Send an ADISC to tape devices.*/
                opts = 0;
                if (fcport->flags & FCF_TAPE_PRESENT)
                        opts |= BIT_1;
                rval = qla2x00_get_port_database(vha, fcport, opts);
                if (rval != QLA_SUCCESS) {
                        ha->isp_ops->fabric_logout(vha, fcport->loop_id,
                            fcport->d_id.b.domain, fcport->d_id.b.area,
                            fcport->d_id.b.al_pa);
                        qla2x00_mark_device_lost(vha, fcport, 1, 0);
                } else {
                        qla2x00_update_fcport(vha, fcport);
                }
        }

        return (rval);
}

/*
 * qla2x00_fabric_login
 *      Issue fabric login command.
 *
 * Input:
 *      ha = adapter block pointer.
 *      device = pointer to FC device type structure.
 *
 * Returns:
 *      0 - Login successfully
 *      1 - Login failed
 *      2 - Initiator device
 *      3 - Fatal error
 */
int
qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport,
    uint16_t *next_loopid)
{
        int     rval;
        int     retry;
        uint16_t tmp_loopid;
        uint16_t mb[MAILBOX_REGISTER_COUNT];
        struct qla_hw_data *ha = vha->hw;

        retry = 0;
        tmp_loopid = 0;

        for (;;) {
                DEBUG(printk("scsi(%ld): Trying Fabric Login w/loop id 0x%04x "
                    "for port %02x%02x%02x.\n",
                    vha->host_no, fcport->loop_id, fcport->d_id.b.domain,
                    fcport->d_id.b.area, fcport->d_id.b.al_pa));

                /* Login fcport on switch. */
                ha->isp_ops->fabric_login(vha, fcport->loop_id,
                    fcport->d_id.b.domain, fcport->d_id.b.area,
                    fcport->d_id.b.al_pa, mb, BIT_0);
                if (mb[0] == MBS_PORT_ID_USED) {
                        /*
                         * Device has another loop ID.  The firmware team
                         * recommends the driver perform an implicit login with
                         * the specified ID again. The ID we just used is save
                         * here so we return with an ID that can be tried by
                         * the next login.
                         */
                        retry++;
                        tmp_loopid = fcport->loop_id;
                        fcport->loop_id = mb[1];

                        DEBUG(printk("Fabric Login: port in use - next "
                            "loop id=0x%04x, port Id=%02x%02x%02x.\n",
                            fcport->loop_id, fcport->d_id.b.domain,
                            fcport->d_id.b.area, fcport->d_id.b.al_pa));

                } else if (mb[0] == MBS_COMMAND_COMPLETE) {
                        /*
                         * Login succeeded.
                         */
                        if (retry) {
                                /* A retry occurred before. */
                                *next_loopid = tmp_loopid;
                        } else {
                                /*
                                 * No retry occurred before. Just increment the
                                 * ID value for next login.
                                 */
                                *next_loopid = (fcport->loop_id + 1);
                        }

                        if (mb[1] & BIT_0) {
                                fcport->port_type = FCT_INITIATOR;
                        } else {
                                fcport->port_type = FCT_TARGET;
                                if (mb[1] & BIT_1) {
                                        fcport->flags |= FCF_TAPE_PRESENT;
                                }
                        }

                        if (mb[10] & BIT_0)
                                fcport->supported_classes |= FC_COS_CLASS2;
                        if (mb[10] & BIT_1)
                                fcport->supported_classes |= FC_COS_CLASS3;

                        rval = QLA_SUCCESS;
                        break;
                } else if (mb[0] == MBS_LOOP_ID_USED) {
                        /*
                         * Loop ID already used, try next loop ID.
                         */
                        fcport->loop_id++;
                        rval = qla2x00_find_new_loop_id(vha, fcport);
                        if (rval != QLA_SUCCESS) {
                                /* Ran out of loop IDs to use */
                                break;
                        }
                } else if (mb[0] == MBS_COMMAND_ERROR) {
                        /*
                         * Firmware possibly timed out during login. If NO
                         * retries are left to do then the device is declared
                         * dead.
                         */
                        *next_loopid = fcport->loop_id;
                        ha->isp_ops->fabric_logout(vha, fcport->loop_id,
                            fcport->d_id.b.domain, fcport->d_id.b.area,
                            fcport->d_id.b.al_pa);
                        qla2x00_mark_device_lost(vha, fcport, 1, 0);

                        rval = 1;
                        break;
                } else {
                        /*
                         * unrecoverable / not handled error
                         */
                        DEBUG2(printk("%s(%ld): failed=%x port_id=%02x%02x%02x "
                            "loop_id=%x jiffies=%lx.\n",
                            __func__, vha->host_no, mb[0],
                            fcport->d_id.b.domain, fcport->d_id.b.area,
                            fcport->d_id.b.al_pa, fcport->loop_id, jiffies));

                        *next_loopid = fcport->loop_id;
                        ha->isp_ops->fabric_logout(vha, fcport->loop_id,
                            fcport->d_id.b.domain, fcport->d_id.b.area,
                            fcport->d_id.b.al_pa);
                        fcport->loop_id = FC_NO_LOOP_ID;
                        fcport->login_retry = 0;

                        rval = 3;
                        break;
                }
        }

        return (rval);
}

/*
 * qla2x00_local_device_login
 *      Issue local device login command.
 *
 * Input:
 *      ha = adapter block pointer.
 *      loop_id = loop id of device to login to.
 *
 * Returns (Where's the #define!!!!):
 *      0 - Login successfully
 *      1 - Login failed
 *      3 - Fatal error
 */
int
qla2x00_local_device_login(scsi_qla_host_t *vha, fc_port_t *fcport)
{
        int             rval;
        uint16_t        mb[MAILBOX_REGISTER_COUNT];

        memset(mb, 0, sizeof(mb));
        rval = qla2x00_login_local_device(vha, fcport, mb, BIT_0);
        if (rval == QLA_SUCCESS) {
                /* Interrogate mailbox registers for any errors */
                if (mb[0] == MBS_COMMAND_ERROR)
                        rval = 1;
                else if (mb[0] == MBS_COMMAND_PARAMETER_ERROR)
                        /* device not in PCB table */
                        rval = 3;
        }

        return (rval);
}

/*
 *  qla2x00_loop_resync
 *      Resync with fibre channel devices.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      0 = success
 */
int
qla2x00_loop_resync(scsi_qla_host_t *vha)
{
        int rval = QLA_SUCCESS;
        uint32_t wait_time;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[vha->req_ques[0]];
        struct rsp_que *rsp = req->rsp;

        atomic_set(&vha->loop_state, LOOP_UPDATE);
        clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
        if (vha->flags.online) {
                if (!(rval = qla2x00_fw_ready(vha))) {
                        /* Wait at most MAX_TARGET RSCNs for a stable link. */
                        wait_time = 256;
                        do {
                                atomic_set(&vha->loop_state, LOOP_UPDATE);

                                /* Issue a marker after FW becomes ready. */
                                qla2x00_marker(vha, req, rsp, 0, 0,
                                        MK_SYNC_ALL);
                                vha->marker_needed = 0;

                                /* Remap devices on Loop. */
                                clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);

                                qla2x00_configure_loop(vha);
                                wait_time--;
                        } while (!atomic_read(&vha->loop_down_timer) &&
                                !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
                                && wait_time && (test_bit(LOOP_RESYNC_NEEDED,
                                &vha->dpc_flags)));
                }
        }

        if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
                return (QLA_FUNCTION_FAILED);

        if (rval)
                DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));

        return (rval);
}

void
qla2x00_update_fcports(scsi_qla_host_t *vha)
{
        fc_port_t *fcport;

        /* Go with deferred removal of rport references. */
        list_for_each_entry(fcport, &vha->vp_fcports, list)
                if (fcport && fcport->drport &&
                    atomic_read(&fcport->state) != FCS_UNCONFIGURED)
                        qla2x00_rport_del(fcport);
}

/*
*  qla2x00_abort_isp
*      Resets ISP and aborts all outstanding commands.
*
* Input:
*      ha           = adapter block pointer.
*
* Returns:
*      0 = success
*/
int
qla2x00_abort_isp(scsi_qla_host_t *vha)
{
        int rval;
        uint8_t        status = 0;
        struct qla_hw_data *ha = vha->hw;
        struct scsi_qla_host *vp;
        struct req_que *req = ha->req_q_map[0];

        if (vha->flags.online) {
                vha->flags.online = 0;
                clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
                ha->qla_stats.total_isp_aborts++;

                qla_printk(KERN_INFO, ha,
                    "Performing ISP error recovery - ha= %p.\n", ha);
                ha->isp_ops->reset_chip(vha);

                atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
                if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
                        atomic_set(&vha->loop_state, LOOP_DOWN);
                        qla2x00_mark_all_devices_lost(vha, 0);
                        list_for_each_entry(vp, &ha->vp_list, list)
                               qla2x00_mark_all_devices_lost(vp, 0);
                } else {
                        if (!atomic_read(&vha->loop_down_timer))
                                atomic_set(&vha->loop_down_timer,
                                    LOOP_DOWN_TIME);
                }

                /* Requeue all commands in outstanding command list. */
                qla2x00_abort_all_cmds(vha, DID_RESET << 16);

                ha->isp_ops->get_flash_version(vha, req->ring);

                ha->isp_ops->nvram_config(vha);

                if (!qla2x00_restart_isp(vha)) {
                        clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);

                        if (!atomic_read(&vha->loop_down_timer)) {
                                /*
                                 * Issue marker command only when we are going
                                 * to start the I/O .
                                 */
                                vha->marker_needed = 1;
                        }

                        vha->flags.online = 1;

                        ha->isp_ops->enable_intrs(ha);

                        ha->isp_abort_cnt = 0;
                        clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);

                        if (ha->fce) {
                                ha->flags.fce_enabled = 1;
                                memset(ha->fce, 0,
                                    fce_calc_size(ha->fce_bufs));
                                rval = qla2x00_enable_fce_trace(vha,
                                    ha->fce_dma, ha->fce_bufs, ha->fce_mb,
                                    &ha->fce_bufs);
                                if (rval) {
                                        qla_printk(KERN_WARNING, ha,
                                            "Unable to reinitialize FCE "
                                            "(%d).\n", rval);
                                        ha->flags.fce_enabled = 0;
                                }
                        }

                        if (ha->eft) {
                                memset(ha->eft, 0, EFT_SIZE);
                                rval = qla2x00_enable_eft_trace(vha,
                                    ha->eft_dma, EFT_NUM_BUFFERS);
                                if (rval) {
                                        qla_printk(KERN_WARNING, ha,
                                            "Unable to reinitialize EFT "
                                            "(%d).\n", rval);
                                }
                        }
                } else {        /* failed the ISP abort */
                        vha->flags.online = 1;
                        if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
                                if (ha->isp_abort_cnt == 0) {
                                        qla_printk(KERN_WARNING, ha,
                                            "ISP error recovery failed - "
                                            "board disabled\n");
                                        /*
                                         * The next call disables the board
                                         * completely.
                                         */
                                        ha->isp_ops->reset_adapter(vha);
                                        vha->flags.online = 0;
                                        clear_bit(ISP_ABORT_RETRY,
                                            &vha->dpc_flags);
                                        status = 0;
                                } else { /* schedule another ISP abort */
                                        ha->isp_abort_cnt--;
                                        DEBUG(printk("qla%ld: ISP abort - "
                                            "retry remaining %d\n",
                                            vha->host_no, ha->isp_abort_cnt));
                                        status = 1;
                                }
                        } else {
                                ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT;
                                DEBUG(printk("qla2x00(%ld): ISP error recovery "
                                    "- retrying (%d) more times\n",
                                    vha->host_no, ha->isp_abort_cnt));
                                set_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
                                status = 1;
                        }
                }

        }

        if (!status) {
                DEBUG(printk(KERN_INFO
                                "qla2x00_abort_isp(%ld): succeeded.\n",
                                vha->host_no));
                list_for_each_entry(vp, &ha->vp_list, list) {
                        if (vp->vp_idx)
                                qla2x00_vp_abort_isp(vp);
                }
        } else {
                qla_printk(KERN_INFO, ha,
                        "qla2x00_abort_isp: **** FAILED ****\n");
        }

        return(status);
}

/*
*  qla2x00_restart_isp
*      restarts the ISP after a reset
*
* Input:
*      ha = adapter block pointer.
*
* Returns:
*      0 = success
*/
static int
qla2x00_restart_isp(scsi_qla_host_t *vha)
{
        uint8_t         status = 0;
        uint32_t wait_time;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[0];
        struct rsp_que *rsp = ha->rsp_q_map[0];

        /* If firmware needs to be loaded */
        if (qla2x00_isp_firmware(vha)) {
                vha->flags.online = 0;
                status = ha->isp_ops->chip_diag(vha);
                if (!status)
                        status = qla2x00_setup_chip(vha);
        }

        if (!status && !(status = qla2x00_init_rings(vha))) {
                clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
                /* Initialize the queues in use */
                qla25xx_init_queues(ha);

                status = qla2x00_fw_ready(vha);
                if (!status) {
                        DEBUG(printk("%s(): Start configure loop, "
                            "status = %d\n", __func__, status));

                        /* Issue a marker after FW becomes ready. */
                        qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);

                        vha->flags.online = 1;
                        /* Wait at most MAX_TARGET RSCNs for a stable link. */
                        wait_time = 256;
                        do {
                                clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
                                qla2x00_configure_loop(vha);
                                wait_time--;
                        } while (!atomic_read(&vha->loop_down_timer) &&
                                !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
                                && wait_time && (test_bit(LOOP_RESYNC_NEEDED,
                                &vha->dpc_flags)));
                }

                /* if no cable then assume it's good */
                if ((vha->device_flags & DFLG_NO_CABLE))
                        status = 0;

                DEBUG(printk("%s(): Configure loop done, status = 0x%x\n",
                                __func__,
                                status));
        }
        return (status);
}

static int
qla25xx_init_queues(struct qla_hw_data *ha)
{
        struct rsp_que *rsp = NULL;
        struct req_que *req = NULL;
        struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
        int ret = -1;
        int i;

        for (i = 1; i < ha->max_queues; i++) {
                rsp = ha->rsp_q_map[i];
                if (rsp) {
                        rsp->options &= ~BIT_0;
                        ret = qla25xx_init_rsp_que(base_vha, rsp);
                        if (ret != QLA_SUCCESS)
                                DEBUG2_17(printk(KERN_WARNING
                                        "%s Rsp que:%d init failed\n", __func__,
                                                rsp->id));
                        else
                                DEBUG2_17(printk(KERN_INFO
                                        "%s Rsp que:%d inited\n", __func__,
                                                rsp->id));
                }
                req = ha->req_q_map[i];
                if (req) {
                /* Clear outstanding commands array. */
                        req->options &= ~BIT_0;
                        ret = qla25xx_init_req_que(base_vha, req);
                        if (ret != QLA_SUCCESS)
                                DEBUG2_17(printk(KERN_WARNING
                                        "%s Req que:%d init failed\n", __func__,
                                                req->id));
                        else
                                DEBUG2_17(printk(KERN_WARNING
                                        "%s Req que:%d inited\n", __func__,
                                                req->id));
                }
        }
        return ret;
}

/*
* qla2x00_reset_adapter
*      Reset adapter.
*
* Input:
*      ha = adapter block pointer.
*/
void
qla2x00_reset_adapter(scsi_qla_host_t *vha)
{
        unsigned long flags = 0;
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

        vha->flags.online = 0;
        ha->isp_ops->disable_intrs(ha);

        spin_lock_irqsave(&ha->hardware_lock, flags);
        WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
        RD_REG_WORD(&reg->hccr);                        /* PCI Posting. */
        WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
        RD_REG_WORD(&reg->hccr);                        /* PCI Posting. */
        spin_unlock_irqrestore(&ha->hardware_lock, flags);
}

void
qla24xx_reset_adapter(scsi_qla_host_t *vha)
{
        unsigned long flags = 0;
        struct qla_hw_data *ha = vha->hw;
        struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

        vha->flags.online = 0;
        ha->isp_ops->disable_intrs(ha);

        spin_lock_irqsave(&ha->hardware_lock, flags);
        WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
        RD_REG_DWORD(&reg->hccr);
        WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
        RD_REG_DWORD(&reg->hccr);
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        if (IS_NOPOLLING_TYPE(ha))
                ha->isp_ops->enable_intrs(ha);
}

/* On sparc systems, obtain port and node WWN from firmware
 * properties.
 */
static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *vha,
        struct nvram_24xx *nv)
{
#ifdef CONFIG_SPARC
        struct qla_hw_data *ha = vha->hw;
        struct pci_dev *pdev = ha->pdev;
        struct device_node *dp = pci_device_to_OF_node(pdev);
        const u8 *val;
        int len;

        val = of_get_property(dp, "port-wwn", &len);
        if (val && len >= WWN_SIZE)
                memcpy(nv->port_name, val, WWN_SIZE);

        val = of_get_property(dp, "node-wwn", &len);
        if (val && len >= WWN_SIZE)
                memcpy(nv->node_name, val, WWN_SIZE);
#endif
}

int
qla24xx_nvram_config(scsi_qla_host_t *vha)
{
        int   rval;
        struct init_cb_24xx *icb;
        struct nvram_24xx *nv;
        uint32_t *dptr;
        uint8_t  *dptr1, *dptr2;
        uint32_t chksum;
        uint16_t cnt;
        struct qla_hw_data *ha = vha->hw;

        rval = QLA_SUCCESS;
        icb = (struct init_cb_24xx *)ha->init_cb;
        nv = ha->nvram;

        /* Determine NVRAM starting address. */
        ha->nvram_size = sizeof(struct nvram_24xx);
        ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
        ha->vpd_size = FA_NVRAM_VPD_SIZE;
        ha->vpd_base = FA_NVRAM_VPD0_ADDR;
        if (PCI_FUNC(ha->pdev->devfn)) {
                ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
                ha->vpd_base = FA_NVRAM_VPD1_ADDR;
        }

        /* Get VPD data into cache */
        ha->vpd = ha->nvram + VPD_OFFSET;
        ha->isp_ops->read_nvram(vha, (uint8_t *)ha->vpd,
            ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);

        /* Get NVRAM data into cache and calculate checksum. */
        dptr = (uint32_t *)nv;
        ha->isp_ops->read_nvram(vha, (uint8_t *)dptr, ha->nvram_base,
            ha->nvram_size);
        for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
                chksum += le32_to_cpu(*dptr++);

        DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
        DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));

        /* Bad NVRAM data, set defaults parameters. */
        if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
            || nv->id[3] != ' ' ||
            nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
                /* Reset NVRAM data. */
                qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
                    "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
                    le16_to_cpu(nv->nvram_version));
                qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
                    "invalid -- WWPN) defaults.\n");

                /*
                 * Set default initialization control block.
                 */
                memset(nv, 0, ha->nvram_size);
                nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
                nv->version = __constant_cpu_to_le16(ICB_VERSION);
                nv->frame_payload_size = __constant_cpu_to_le16(2048);
                nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
                nv->exchange_count = __constant_cpu_to_le16(0);
                nv->hard_address = __constant_cpu_to_le16(124);
                nv->port_name[0] = 0x21;
                nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
                nv->port_name[2] = 0x00;
                nv->port_name[3] = 0xe0;
                nv->port_name[4] = 0x8b;
                nv->port_name[5] = 0x1c;
                nv->port_name[6] = 0x55;
                nv->port_name[7] = 0x86;
                nv->node_name[0] = 0x20;
                nv->node_name[1] = 0x00;
                nv->node_name[2] = 0x00;
                nv->node_name[3] = 0xe0;
                nv->node_name[4] = 0x8b;
                nv->node_name[5] = 0x1c;
                nv->node_name[6] = 0x55;
                nv->node_name[7] = 0x86;
                qla24xx_nvram_wwn_from_ofw(vha, nv);
                nv->login_retry_count = __constant_cpu_to_le16(8);
                nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
                nv->login_timeout = __constant_cpu_to_le16(0);
                nv->firmware_options_1 =
                    __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
                nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
                nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
                nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
                nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
                nv->efi_parameters = __constant_cpu_to_le32(0);
                nv->reset_delay = 5;
                nv->max_luns_per_target = __constant_cpu_to_le16(128);
                nv->port_down_retry_count = __constant_cpu_to_le16(30);
                nv->link_down_timeout = __constant_cpu_to_le16(30);

                rval = 1;
        }

        /* Reset Initialization control block */
        memset(icb, 0, ha->init_cb_size);

        /* Copy 1st segment. */
        dptr1 = (uint8_t *)icb;
        dptr2 = (uint8_t *)&nv->version;
        cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
        while (cnt--)
                *dptr1++ = *dptr2++;

        icb->login_retry_count = nv->login_retry_count;
        icb->link_down_on_nos = nv->link_down_on_nos;

        /* Copy 2nd segment. */
        dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
        dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
        cnt = (uint8_t *)&icb->reserved_3 -
            (uint8_t *)&icb->interrupt_delay_timer;
        while (cnt--)
                *dptr1++ = *dptr2++;

        /*
         * Setup driver NVRAM options.
         */
        qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
            "QLA2462");

        /* Use alternate WWN? */
        if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
                memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
                memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
        }

        /* Prepare nodename */
        if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) {
                /*
                 * Firmware will apply the following mask if the nodename was
                 * not provided.
                 */
                memcpy(icb->node_name, icb->port_name, WWN_SIZE);
                icb->node_name[0] &= 0xF0;
        }

        /* Set host adapter parameters. */
        ha->flags.disable_risc_code_load = 0;
        ha->flags.enable_lip_reset = 0;
        ha->flags.enable_lip_full_login =
            le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
        ha->flags.enable_target_reset =
            le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
        ha->flags.enable_led_scheme = 0;
        ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;

        ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
            (BIT_6 | BIT_5 | BIT_4)) >> 4;

        memcpy(ha->fw_seriallink_options24, nv->seriallink_options,
            sizeof(ha->fw_seriallink_options24));

        /* save HBA serial number */
        ha->serial0 = icb->port_name[5];
        ha->serial1 = icb->port_name[6];
        ha->serial2 = icb->port_name[7];
        memcpy(vha->node_name, icb->node_name, WWN_SIZE);
        memcpy(vha->port_name, icb->port_name, WWN_SIZE);

        icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);

        ha->retry_count = le16_to_cpu(nv->login_retry_count);

        /* Set minimum login_timeout to 4 seconds. */
        if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
                nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
        if (le16_to_cpu(nv->login_timeout) < 4)
                nv->login_timeout = __constant_cpu_to_le16(4);
        ha->login_timeout = le16_to_cpu(nv->login_timeout);
        icb->login_timeout = nv->login_timeout;

        /* Set minimum RATOV to 100 tenths of a second. */
        ha->r_a_tov = 100;

        ha->loop_reset_delay = nv->reset_delay;

        /* Link Down Timeout = 0:
         *
         *      When Port Down timer expires we will start returning
         *      I/O's to OS with "DID_NO_CONNECT".
         *
         * Link Down Timeout != 0:
         *
         *       The driver waits for the link to come up after link down
         *       before returning I/Os to OS with "DID_NO_CONNECT".
         */
        if (le16_to_cpu(nv->link_down_timeout) == 0) {
                ha->loop_down_abort_time =
                    (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
        } else {
                ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
                ha->loop_down_abort_time =
                    (LOOP_DOWN_TIME - ha->link_down_timeout);
        }

        /* Need enough time to try and get the port back. */
        ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
        if (qlport_down_retry)
                ha->port_down_retry_count = qlport_down_retry;

        /* Set login_retry_count */
        ha->login_retry_count  = le16_to_cpu(nv->login_retry_count);
        if (ha->port_down_retry_count ==
            le16_to_cpu(nv->port_down_retry_count) &&
            ha->port_down_retry_count > 3)
                ha->login_retry_count = ha->port_down_retry_count;
        else if (ha->port_down_retry_count > (int)ha->login_retry_count)
                ha->login_retry_count = ha->port_down_retry_count;
        if (ql2xloginretrycount)
                ha->login_retry_count = ql2xloginretrycount;

        /* Enable ZIO. */
        if (!vha->flags.init_done) {
                ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
                    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
                ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
                    le16_to_cpu(icb->interrupt_delay_timer): 2;
        }
        icb->firmware_options_2 &= __constant_cpu_to_le32(
            ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
        vha->flags.process_response_queue = 0;
        if (ha->zio_mode != QLA_ZIO_DISABLED) {
                ha->zio_mode = QLA_ZIO_MODE_6;

                DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
                    "(%d us).\n", vha->host_no, ha->zio_mode,
                    ha->zio_timer * 100));
                qla_printk(KERN_INFO, ha,
                    "ZIO mode %d enabled; timer delay (%d us).\n",
                    ha->zio_mode, ha->zio_timer * 100);

                icb->firmware_options_2 |= cpu_to_le32(
                    (uint32_t)ha->zio_mode);
                icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
                vha->flags.process_response_queue = 1;
        }

        if (rval) {
                DEBUG2_3(printk(KERN_WARNING
                    "scsi(%ld): NVRAM configuration failed!\n", vha->host_no));
        }
        return (rval);
}

static int
qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
        int     rval = QLA_SUCCESS;
        int     segments, fragment;
        uint32_t faddr;
        uint32_t *dcode, dlen;
        uint32_t risc_addr;
        uint32_t risc_size;
        uint32_t i;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[0];

        qla_printk(KERN_INFO, ha,
            "FW: Loading from flash (%x)...\n", ha->flt_region_fw);

        rval = QLA_SUCCESS;

        segments = FA_RISC_CODE_SEGMENTS;
        faddr = ha->flt_region_fw;
        dcode = (uint32_t *)req->ring;
        *srisc_addr = 0;

        /* Validate firmware image by checking version. */
        qla24xx_read_flash_data(vha, dcode, faddr + 4, 4);
        for (i = 0; i < 4; i++)
                dcode[i] = be32_to_cpu(dcode[i]);
        if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
            dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
            (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
                dcode[3] == 0)) {
                qla_printk(KERN_WARNING, ha,
                    "Unable to verify integrity of flash firmware image!\n");
                qla_printk(KERN_WARNING, ha,
                    "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
                    dcode[1], dcode[2], dcode[3]);

                return QLA_FUNCTION_FAILED;
        }

        while (segments && rval == QLA_SUCCESS) {
                /* Read segment's load information. */
                qla24xx_read_flash_data(vha, dcode, faddr, 4);

                risc_addr = be32_to_cpu(dcode[2]);
                *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
                risc_size = be32_to_cpu(dcode[3]);

                fragment = 0;
                while (risc_size > 0 && rval == QLA_SUCCESS) {
                        dlen = (uint32_t)(ha->fw_transfer_size >> 2);
                        if (dlen > risc_size)
                                dlen = risc_size;

                        DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
                            "addr %x, number of dwords 0x%x, offset 0x%x.\n",
                            vha->host_no, risc_addr, dlen, faddr));

                        qla24xx_read_flash_data(vha, dcode, faddr, dlen);
                        for (i = 0; i < dlen; i++)
                                dcode[i] = swab32(dcode[i]);

                        rval = qla2x00_load_ram(vha, req->dma, risc_addr,
                            dlen);
                        if (rval) {
                                DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
                                    "segment %d of firmware\n", vha->host_no,
                                    fragment));
                                qla_printk(KERN_WARNING, ha,
                                    "[ERROR] Failed to load segment %d of "
                                    "firmware\n", fragment);
                                break;
                        }

                        faddr += dlen;
                        risc_addr += dlen;
                        risc_size -= dlen;
                        fragment++;
                }

                /* Next segment. */
                segments--;
        }

        return rval;
}

#define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/"

int
qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
        int     rval;
        int     i, fragment;
        uint16_t *wcode, *fwcode;
        uint32_t risc_addr, risc_size, fwclen, wlen, *seg;
        struct fw_blob *blob;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[0];

        /* Load firmware blob. */
        blob = qla2x00_request_firmware(vha);
        if (!blob) {
                qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
                qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
                    "from: " QLA_FW_URL ".\n");
                return QLA_FUNCTION_FAILED;
        }

        rval = QLA_SUCCESS;

        wcode = (uint16_t *)req->ring;
        *srisc_addr = 0;
        fwcode = (uint16_t *)blob->fw->data;
        fwclen = 0;

        /* Validate firmware image by checking version. */
        if (blob->fw->size < 8 * sizeof(uint16_t)) {
                qla_printk(KERN_WARNING, ha,
                    "Unable to verify integrity of firmware image (%Zd)!\n",
                    blob->fw->size);
                goto fail_fw_integrity;
        }
        for (i = 0; i < 4; i++)
                wcode[i] = be16_to_cpu(fwcode[i + 4]);
        if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
            wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
                wcode[2] == 0 && wcode[3] == 0)) {
                qla_printk(KERN_WARNING, ha,
                    "Unable to verify integrity of firmware image!\n");
                qla_printk(KERN_WARNING, ha,
                    "Firmware data: %04x %04x %04x %04x!\n", wcode[0],
                    wcode[1], wcode[2], wcode[3]);
                goto fail_fw_integrity;
        }

        seg = blob->segs;
        while (*seg && rval == QLA_SUCCESS) {
                risc_addr = *seg;
                *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr;
                risc_size = be16_to_cpu(fwcode[3]);

                /* Validate firmware image size. */
                fwclen += risc_size * sizeof(uint16_t);
                if (blob->fw->size < fwclen) {
                        qla_printk(KERN_WARNING, ha,
                            "Unable to verify integrity of firmware image "
                            "(%Zd)!\n", blob->fw->size);
                        goto fail_fw_integrity;
                }

                fragment = 0;
                while (risc_size > 0 && rval == QLA_SUCCESS) {
                        wlen = (uint16_t)(ha->fw_transfer_size >> 1);
                        if (wlen > risc_size)
                                wlen = risc_size;

                        DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
                            "addr %x, number of words 0x%x.\n", vha->host_no,
                            risc_addr, wlen));

                        for (i = 0; i < wlen; i++)
                                wcode[i] = swab16(fwcode[i]);

                        rval = qla2x00_load_ram(vha, req->dma, risc_addr,
                            wlen);
                        if (rval) {
                                DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
                                    "segment %d of firmware\n", vha->host_no,
                                    fragment));
                                qla_printk(KERN_WARNING, ha,
                                    "[ERROR] Failed to load segment %d of "
                                    "firmware\n", fragment);
                                break;
                        }

                        fwcode += wlen;
                        risc_addr += wlen;
                        risc_size -= wlen;
                        fragment++;
                }

                /* Next segment. */
                seg++;
        }
        return rval;

fail_fw_integrity:
        return QLA_FUNCTION_FAILED;
}

static int
qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
        int     rval;
        int     segments, fragment;
        uint32_t *dcode, dlen;
        uint32_t risc_addr;
        uint32_t risc_size;
        uint32_t i;
        struct fw_blob *blob;
        uint32_t *fwcode, fwclen;
        struct qla_hw_data *ha = vha->hw;
        struct req_que *req = ha->req_q_map[0];

        /* Load firmware blob. */
        blob = qla2x00_request_firmware(vha);
        if (!blob) {
                qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
                qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
                    "from: " QLA_FW_URL ".\n");

                return QLA_FUNCTION_FAILED;
        }

        qla_printk(KERN_INFO, ha,
            "FW: Loading via request-firmware...\n");

        rval = QLA_SUCCESS;

        segments = FA_RISC_CODE_SEGMENTS;
        dcode = (uint32_t *)req->ring;
        *srisc_addr = 0;
        fwcode = (uint32_t *)blob->fw->data;
        fwclen = 0;

        /* Validate firmware image by checking version. */
        if (blob->fw->size < 8 * sizeof(uint32_t)) {
                qla_printk(KERN_WARNING, ha,
                    "Unable to verify integrity of firmware image (%Zd)!\n",
                    blob->fw->size);
                goto fail_fw_integrity;
        }
        for (i = 0; i < 4; i++)
                dcode[i] = be32_to_cpu(fwcode[i + 4]);
        if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
            dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
            (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
                dcode[3] == 0)) {
                qla_printk(KERN_WARNING, ha,
                    "Unable to verify integrity of firmware image!\n");
                qla_printk(KERN_WARNING, ha,
                    "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
                    dcode[1], dcode[2], dcode[3]);
                goto fail_fw_integrity;
        }

        while (segments && rval == QLA_SUCCESS) {
                risc_addr = be32_to_cpu(fwcode[2]);
                *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
                risc_size = be32_to_cpu(fwcode[3]);

                /* Validate firmware image size. */
                fwclen += risc_size * sizeof(uint32_t);
                if (blob->fw->size < fwclen) {
                        qla_printk(KERN_WARNING, ha,
                            "Unable to verify integrity of firmware image "
                            "(%Zd)!\n", blob->fw->size);

                        goto fail_fw_integrity;
                }

                fragment = 0;
                while (risc_size > 0 && rval == QLA_SUCCESS) {
                        dlen = (uint32_t)(ha->fw_transfer_size >> 2);
                        if (dlen > risc_size)
                                dlen = risc_size;

                        DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
                            "addr %x, number of dwords 0x%x.\n", vha->host_no,
                            risc_addr, dlen));

                        for (i = 0; i < dlen; i++)
                                dcode[i] = swab32(fwcode[i]);

                        rval = qla2x00_load_ram(vha, req->dma, risc_addr,
                            dlen);
                        if (rval) {
                                DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
                                    "segment %d of firmware\n", vha->host_no,
                                    fragment));
                                qla_printk(KERN_WARNING, ha,
                                    "[ERROR] Failed to load segment %d of "
                                    "firmware\n", fragment);
                                break;
                        }

                        fwcode += dlen;
                        risc_addr += dlen;
                        risc_size -= dlen;
                        fragment++;
                }

                /* Next segment. */
                segments--;
        }
        return rval;

fail_fw_integrity:
        return QLA_FUNCTION_FAILED;
}

int
qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
        int rval;

        /*
         * FW Load priority:
         * 1) Firmware via request-firmware interface (.bin file).
         * 2) Firmware residing in flash.
         */
        rval = qla24xx_load_risc_blob(vha, srisc_addr);
        if (rval == QLA_SUCCESS)
                return rval;

        return qla24xx_load_risc_flash(vha, srisc_addr);
}

int
qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
        int rval;

        /*
         * FW Load priority:
         * 1) Firmware residing in flash.
         * 2) Firmware via request-firmware interface (.bin file).
         */
        rval = qla24xx_load_risc_flash(vha, srisc_addr);
        if (rval == QLA_SUCCESS)
                return rval;

        return qla24xx_load_risc_blob(vha, srisc_addr);
}

void
qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
{
        int ret, retries;
        struct qla_hw_data *ha = vha->hw;

        if (!IS_FWI2_CAPABLE(ha))
                return;
        if (!ha->fw_major_version)
                return;

        ret = qla2x00_stop_firmware(vha);
        for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
            retries ; retries--) {
                ha->isp_ops->reset_chip(vha);
                if (ha->isp_ops->chip_diag(vha) != QLA_SUCCESS)
                        continue;
                if (qla2x00_setup_chip(vha) != QLA_SUCCESS)
                        continue;
                qla_printk(KERN_INFO, ha,
                    "Attempting retry of stop-firmware command...\n");
                ret = qla2x00_stop_firmware(vha);
        }
}

int
qla24xx_configure_vhba(scsi_qla_host_t *vha)
{
        int rval = QLA_SUCCESS;
        uint16_t mb[MAILBOX_REGISTER_COUNT];
        struct qla_hw_data *ha = vha->hw;
        struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
        struct req_que *req = ha->req_q_map[vha->req_ques[0]];
        struct rsp_que *rsp = req->rsp;

        if (!vha->vp_idx)
                return -EINVAL;

        rval = qla2x00_fw_ready(base_vha);
        if (rval == QLA_SUCCESS) {
                clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
                qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
        }

        vha->flags.management_server_logged_in = 0;

        /* Login to SNS first */
        ha->isp_ops->fabric_login(vha, NPH_SNS, 0xff, 0xff, 0xfc, mb, BIT_1);
        if (mb[0] != MBS_COMMAND_COMPLETE) {
                DEBUG15(qla_printk(KERN_INFO, ha,
                    "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
                    "mb[2]=%x mb[6]=%x mb[7]=%x\n", NPH_SNS,
                    mb[0], mb[1], mb[2], mb[6], mb[7]));
                return (QLA_FUNCTION_FAILED);
        }

        atomic_set(&vha->loop_down_timer, 0);
        atomic_set(&vha->loop_state, LOOP_UP);
        set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
        set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
        rval = qla2x00_loop_resync(base_vha);

        return rval;
}

/* 84XX Support **************************************************************/

static LIST_HEAD(qla_cs84xx_list);
static DEFINE_MUTEX(qla_cs84xx_mutex);

static struct qla_chip_state_84xx *
qla84xx_get_chip(struct scsi_qla_host *vha)
{
        struct qla_chip_state_84xx *cs84xx;
        struct qla_hw_data *ha = vha->hw;

        mutex_lock(&qla_cs84xx_mutex);

        /* Find any shared 84xx chip. */
        list_for_each_entry(cs84xx, &qla_cs84xx_list, list) {
                if (cs84xx->bus == ha->pdev->bus) {
                        kref_get(&cs84xx->kref);
                        goto done;
                }
        }

        cs84xx = kzalloc(sizeof(*cs84xx), GFP_KERNEL);
        if (!cs84xx)
                goto done;

        kref_init(&cs84xx->kref);
        spin_lock_init(&cs84xx->access_lock);
        mutex_init(&cs84xx->fw_update_mutex);
        cs84xx->bus = ha->pdev->bus;

        list_add_tail(&cs84xx->list, &qla_cs84xx_list);
done:
        mutex_unlock(&qla_cs84xx_mutex);
        return cs84xx;
}

static void
__qla84xx_chip_release(struct kref *kref)
{
        struct qla_chip_state_84xx *cs84xx =
            container_of(kref, struct qla_chip_state_84xx, kref);

        mutex_lock(&qla_cs84xx_mutex);
        list_del(&cs84xx->list);
        mutex_unlock(&qla_cs84xx_mutex);
        kfree(cs84xx);
}

void
qla84xx_put_chip(struct scsi_qla_host *vha)
{
        struct qla_hw_data *ha = vha->hw;
        if (ha->cs84xx)
                kref_put(&ha->cs84xx->kref, __qla84xx_chip_release);
}

static int
qla84xx_init_chip(scsi_qla_host_t *vha)
{
        int rval;
        uint16_t status[2];
        struct qla_hw_data *ha = vha->hw;

        mutex_lock(&ha->cs84xx->fw_update_mutex);

        rval = qla84xx_verify_chip(vha, status);

        mutex_unlock(&ha->cs84xx->fw_update_mutex);

        return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
            QLA_SUCCESS;
}

/* 81XX Support **************************************************************/

int
qla81xx_nvram_config(scsi_qla_host_t *vha)
{
        int   rval;
        struct init_cb_81xx *icb;
        struct nvram_81xx *nv;
        uint32_t *dptr;
        uint8_t  *dptr1, *dptr2;
        uint32_t chksum;
        uint16_t cnt;
        struct qla_hw_data *ha = vha->hw;

        rval = QLA_SUCCESS;
        icb = (struct init_cb_81xx *)ha->init_cb;
        nv = ha->nvram;

        /* Determine NVRAM starting address. */
        ha->nvram_size = sizeof(struct nvram_81xx);
        ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
        ha->vpd_size = FA_NVRAM_VPD_SIZE;
        ha->vpd_base = FA_NVRAM_VPD0_ADDR;
        if (PCI_FUNC(ha->pdev->devfn) & 1) {
                ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
                ha->vpd_base = FA_NVRAM_VPD1_ADDR;
        }

        /* Get VPD data into cache */
        ha->vpd = ha->nvram + VPD_OFFSET;
        ha->isp_ops->read_nvram(vha, (uint8_t *)ha->vpd,
            ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);

        /* Get NVRAM data into cache and calculate checksum. */
        dptr = (uint32_t *)nv;
        ha->isp_ops->read_nvram(vha, (uint8_t *)dptr, ha->nvram_base,
            ha->nvram_size);
        for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
                chksum += le32_to_cpu(*dptr++);

        DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
        DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));

        /* Bad NVRAM data, set defaults parameters. */
        if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
            || nv->id[3] != ' ' ||
            nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
                /* Reset NVRAM data. */
                qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
                    "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
                    le16_to_cpu(nv->nvram_version));
                qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
                    "invalid -- WWPN) defaults.\n");

                /*
                 * Set default initialization control block.
                 */
                memset(nv, 0, ha->nvram_size);
                nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
                nv->version = __constant_cpu_to_le16(ICB_VERSION);
                nv->frame_payload_size = __constant_cpu_to_le16(2048);
                nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
                nv->exchange_count = __constant_cpu_to_le16(0);
                nv->port_name[0] = 0x21;
                nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
                nv->port_name[2] = 0x00;
                nv->port_name[3] = 0xe0;
                nv->port_name[4] = 0x8b;
                nv->port_name[5] = 0x1c;
                nv->port_name[6] = 0x55;
                nv->port_name[7] = 0x86;
                nv->node_name[0] = 0x20;
                nv->node_name[1] = 0x00;
                nv->node_name[2] = 0x00;
                nv->node_name[3] = 0xe0;
                nv->node_name[4] = 0x8b;
                nv->node_name[5] = 0x1c;
                nv->node_name[6] = 0x55;
                nv->node_name[7] = 0x86;
                nv->login_retry_count = __constant_cpu_to_le16(8);
                nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
                nv->login_timeout = __constant_cpu_to_le16(0);
                nv->firmware_options_1 =
                    __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
                nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
                nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
                nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
                nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
                nv->efi_parameters = __constant_cpu_to_le32(0);
                nv->reset_delay = 5;
                nv->max_luns_per_target = __constant_cpu_to_le16(128);
                nv->port_down_retry_count = __constant_cpu_to_le16(30);
                nv->link_down_timeout = __constant_cpu_to_le16(30);
                nv->enode_mac[0] = 0x01;
                nv->enode_mac[1] = 0x02;
                nv->enode_mac[2] = 0x03;
                nv->enode_mac[3] = 0x04;
                nv->enode_mac[4] = 0x05;
                nv->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);

                rval = 1;
        }

        /* Reset Initialization control block */
        memset(icb, 0, sizeof(struct init_cb_81xx));

        /* Copy 1st segment. */
        dptr1 = (uint8_t *)icb;
        dptr2 = (uint8_t *)&nv->version;
        cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
        while (cnt--)
                *dptr1++ = *dptr2++;

        icb->login_retry_count = nv->login_retry_count;

        /* Copy 2nd segment. */
        dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
        dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
        cnt = (uint8_t *)&icb->reserved_5 -
            (uint8_t *)&icb->interrupt_delay_timer;
        while (cnt--)
                *dptr1++ = *dptr2++;

        memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac));
        /* Some boards (with valid NVRAMs) still have NULL enode_mac!! */
        if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) {
                icb->enode_mac[0] = 0x01;
                icb->enode_mac[1] = 0x02;
                icb->enode_mac[2] = 0x03;
                icb->enode_mac[3] = 0x04;
                icb->enode_mac[4] = 0x05;
                icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
        }

        /*
         * Setup driver NVRAM options.
         */
        qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
            "QLE81XX");

        /* Use alternate WWN? */
        if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
                memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
                memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
        }

        /* Prepare nodename */
        if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) {
                /*
                 * Firmware will apply the following mask if the nodename was
                 * not provided.
                 */
                memcpy(icb->node_name, icb->port_name, WWN_SIZE);
                icb->node_name[0] &= 0xF0;
        }

        /* Set host adapter parameters. */
        ha->flags.disable_risc_code_load = 0;
        ha->flags.enable_lip_reset = 0;
        ha->flags.enable_lip_full_login =
            le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
        ha->flags.enable_target_reset =
            le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
        ha->flags.enable_led_scheme = 0;
        ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;

        ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
            (BIT_6 | BIT_5 | BIT_4)) >> 4;

        /* save HBA serial number */
        ha->serial0 = icb->port_name[5];
        ha->serial1 = icb->port_name[6];
        ha->serial2 = icb->port_name[7];
        memcpy(vha->node_name, icb->node_name, WWN_SIZE);
        memcpy(vha->port_name, icb->port_name, WWN_SIZE);

        icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);

        ha->retry_count = le16_to_cpu(nv->login_retry_count);

        /* Set minimum login_timeout to 4 seconds. */
        if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
                nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
        if (le16_to_cpu(nv->login_timeout) < 4)
                nv->login_timeout = __constant_cpu_to_le16(4);
        ha->login_timeout = le16_to_cpu(nv->login_timeout);
        icb->login_timeout = nv->login_timeout;

        /* Set minimum RATOV to 100 tenths of a second. */
        ha->r_a_tov = 100;

        ha->loop_reset_delay = nv->reset_delay;

        /* Link Down Timeout = 0:
         *
         *      When Port Down timer expires we will start returning
         *      I/O's to OS with "DID_NO_CONNECT".
         *
         * Link Down Timeout != 0:
         *
         *       The driver waits for the link to come up after link down
         *       before returning I/Os to OS with "DID_NO_CONNECT".
         */
        if (le16_to_cpu(nv->link_down_timeout) == 0) {
                ha->loop_down_abort_time =
                    (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
        } else {
                ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
                ha->loop_down_abort_time =
                    (LOOP_DOWN_TIME - ha->link_down_timeout);
        }

        /* Need enough time to try and get the port back. */
        ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
        if (qlport_down_retry)
                ha->port_down_retry_count = qlport_down_retry;

        /* Set login_retry_count */
        ha->login_retry_count  = le16_to_cpu(nv->login_retry_count);
        if (ha->port_down_retry_count ==
            le16_to_cpu(nv->port_down_retry_count) &&
            ha->port_down_retry_count > 3)
                ha->login_retry_count = ha->port_down_retry_count;
        else if (ha->port_down_retry_count > (int)ha->login_retry_count)
                ha->login_retry_count = ha->port_down_retry_count;
        if (ql2xloginretrycount)
                ha->login_retry_count = ql2xloginretrycount;

        /* Enable ZIO. */
        if (!vha->flags.init_done) {
                ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
                    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
                ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
                    le16_to_cpu(icb->interrupt_delay_timer): 2;
        }
        icb->firmware_options_2 &= __constant_cpu_to_le32(
            ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
        vha->flags.process_response_queue = 0;
        if (ha->zio_mode != QLA_ZIO_DISABLED) {
                ha->zio_mode = QLA_ZIO_MODE_6;

                DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
                    "(%d us).\n", vha->host_no, ha->zio_mode,
                    ha->zio_timer * 100));
                qla_printk(KERN_INFO, ha,
                    "ZIO mode %d enabled; timer delay (%d us).\n",
                    ha->zio_mode, ha->zio_timer * 100);

                icb->firmware_options_2 |= cpu_to_le32(
                    (uint32_t)ha->zio_mode);
                icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
                vha->flags.process_response_queue = 1;
        }

        if (rval) {
                DEBUG2_3(printk(KERN_WARNING
                    "scsi(%ld): NVRAM configuration failed!\n", vha->host_no));
        }
        return (rval);
}

void
qla81xx_update_fw_options(scsi_qla_host_t *ha)
{
}