git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/b43/main.c

   1 /*
   2
   3   Broadcom B43 wireless driver
   4
   5   Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
   6   Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it>
   7   Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
   8   Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
   9   Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
  10
  11   Some parts of the code in this file are derived from the ipw2200
  12   driver  Copyright(c) 2003 - 2004 Intel Corporation.
  13
  14   This program is free software; you can redistribute it and/or modify
  15   it under the terms of the GNU General Public License as published by
  16   the Free Software Foundation; either version 2 of the License, or
  17   (at your option) any later version.
  18
  19   This program is distributed in the hope that it will be useful,
  20   but WITHOUT ANY WARRANTY; without even the implied warranty of
  21   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22   GNU General Public License for more details.
  23
  24   You should have received a copy of the GNU General Public License
  25   along with this program; see the file COPYING.  If not, write to
  26   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  27   Boston, MA 02110-1301, USA.
  28
  29 */
  30
  31 #include <linux/delay.h>
  32 #include <linux/init.h>
  33 #include <linux/moduleparam.h>
  34 #include <linux/if_arp.h>
  35 #include <linux/etherdevice.h>
  36 #include <linux/version.h>
  37 #include <linux/firmware.h>
  38 #include <linux/wireless.h>
  39 #include <linux/workqueue.h>
  40 #include <linux/skbuff.h>
  41 #include <linux/io.h>
  42 #include <linux/dma-mapping.h>
  43 #include <asm/unaligned.h>
  44
  45 #include "b43.h"
  46 #include "main.h"
  47 #include "debugfs.h"
  48 #include "phy.h"
  49 #include "nphy.h"
  50 #include "dma.h"
  51 #include "pio.h"
  52 #include "sysfs.h"
  53 #include "xmit.h"
  54 #include "lo.h"
  55 #include "pcmcia.h"
  56
  57 MODULE_DESCRIPTION("Broadcom B43 wireless driver");
  58 MODULE_AUTHOR("Martin Langer");
  59 MODULE_AUTHOR("Stefano Brivio");
  60 MODULE_AUTHOR("Michael Buesch");
  61 MODULE_LICENSE("GPL");
  62
  63 MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID);
  64
  65
  66 static int modparam_bad_frames_preempt;
  67 module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
  68 MODULE_PARM_DESC(bad_frames_preempt,
  69                  "enable(1) / disable(0) Bad Frames Preemption");
  70
  71 static char modparam_fwpostfix[16];
  72 module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
  73 MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load.");
  74
  75 static int modparam_hwpctl;
  76 module_param_named(hwpctl, modparam_hwpctl, int, 0444);
  77 MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)");
  78
  79 static int modparam_nohwcrypt;
  80 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
  81 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  82
  83 int b43_modparam_qos = 1;
  84 module_param_named(qos, b43_modparam_qos, int, 0444);
  85 MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
  86
  87 static int modparam_btcoex = 1;
  88 module_param_named(btcoex, modparam_btcoex, int, 0444);
  89 MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistance (default on)");
  90
  91
  92 static const struct ssb_device_id b43_ssb_tbl[] = {
  93         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
  94         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
  95         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7),
  96         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
  97         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
  98         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
  99         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
 100         SSB_DEVTABLE_END
 101 };
 102
 103 MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl);
 104
 105 /* Channel and ratetables are shared for all devices.
 106  * They can't be const, because ieee80211 puts some precalculated
 107  * data in there. This data is the same for all devices, so we don't
 108  * get concurrency issues */
 109 #define RATETAB_ENT(_rateid, _flags) \
 110         {                                                               \
 111                 .bitrate        = B43_RATE_TO_BASE100KBPS(_rateid),     \
 112                 .hw_value       = (_rateid),                            \
 113                 .flags          = (_flags),                             \
 114         }
 115
 116 /*
 117  * NOTE: When changing this, sync with xmit.c's
 118  *       b43_plcp_get_bitrate_idx_* functions!
 119  */
 120 static struct ieee80211_rate __b43_ratetable[] = {
 121         RATETAB_ENT(B43_CCK_RATE_1MB, 0),
 122         RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE),
 123         RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE),
 124         RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE),
 125         RATETAB_ENT(B43_OFDM_RATE_6MB, 0),
 126         RATETAB_ENT(B43_OFDM_RATE_9MB, 0),
 127         RATETAB_ENT(B43_OFDM_RATE_12MB, 0),
 128         RATETAB_ENT(B43_OFDM_RATE_18MB, 0),
 129         RATETAB_ENT(B43_OFDM_RATE_24MB, 0),
 130         RATETAB_ENT(B43_OFDM_RATE_36MB, 0),
 131         RATETAB_ENT(B43_OFDM_RATE_48MB, 0),
 132         RATETAB_ENT(B43_OFDM_RATE_54MB, 0),
 133 };
 134
 135 #define b43_a_ratetable         (__b43_ratetable + 4)
 136 #define b43_a_ratetable_size    8
 137 #define b43_b_ratetable         (__b43_ratetable + 0)
 138 #define b43_b_ratetable_size    4
 139 #define b43_g_ratetable         (__b43_ratetable + 0)
 140 #define b43_g_ratetable_size    12
 141
 142 #define CHAN4G(_channel, _freq, _flags) {                       \
 143         .band                   = IEEE80211_BAND_2GHZ,          \
 144         .center_freq            = (_freq),                      \
 145         .hw_value               = (_channel),                   \
 146         .flags                  = (_flags),                     \
 147         .max_antenna_gain       = 0,                            \
 148         .max_power              = 30,                           \
 149 }
 150 static struct ieee80211_channel b43_2ghz_chantable[] = {
 151         CHAN4G(1, 2412, 0),
 152         CHAN4G(2, 2417, 0),
 153         CHAN4G(3, 2422, 0),
 154         CHAN4G(4, 2427, 0),
 155         CHAN4G(5, 2432, 0),
 156         CHAN4G(6, 2437, 0),
 157         CHAN4G(7, 2442, 0),
 158         CHAN4G(8, 2447, 0),
 159         CHAN4G(9, 2452, 0),
 160         CHAN4G(10, 2457, 0),
 161         CHAN4G(11, 2462, 0),
 162         CHAN4G(12, 2467, 0),
 163         CHAN4G(13, 2472, 0),
 164         CHAN4G(14, 2484, 0),
 165 };
 166 #undef CHAN4G
 167
 168 #define CHAN5G(_channel, _flags) {                              \
 169         .band                   = IEEE80211_BAND_5GHZ,          \
 170         .center_freq            = 5000 + (5 * (_channel)),      \
 171         .hw_value               = (_channel),                   \
 172         .flags                  = (_flags),                     \
 173         .max_antenna_gain       = 0,                            \
 174         .max_power              = 30,                           \
 175 }
 176 static struct ieee80211_channel b43_5ghz_nphy_chantable[] = {
 177         CHAN5G(32, 0),          CHAN5G(34, 0),
 178         CHAN5G(36, 0),          CHAN5G(38, 0),
 179         CHAN5G(40, 0),          CHAN5G(42, 0),
 180         CHAN5G(44, 0),          CHAN5G(46, 0),
 181         CHAN5G(48, 0),          CHAN5G(50, 0),
 182         CHAN5G(52, 0),          CHAN5G(54, 0),
 183         CHAN5G(56, 0),          CHAN5G(58, 0),
 184         CHAN5G(60, 0),          CHAN5G(62, 0),
 185         CHAN5G(64, 0),          CHAN5G(66, 0),
 186         CHAN5G(68, 0),          CHAN5G(70, 0),
 187         CHAN5G(72, 0),          CHAN5G(74, 0),
 188         CHAN5G(76, 0),          CHAN5G(78, 0),
 189         CHAN5G(80, 0),          CHAN5G(82, 0),
 190         CHAN5G(84, 0),          CHAN5G(86, 0),
 191         CHAN5G(88, 0),          CHAN5G(90, 0),
 192         CHAN5G(92, 0),          CHAN5G(94, 0),
 193         CHAN5G(96, 0),          CHAN5G(98, 0),
 194         CHAN5G(100, 0),         CHAN5G(102, 0),
 195         CHAN5G(104, 0),         CHAN5G(106, 0),
 196         CHAN5G(108, 0),         CHAN5G(110, 0),
 197         CHAN5G(112, 0),         CHAN5G(114, 0),
 198         CHAN5G(116, 0),         CHAN5G(118, 0),
 199         CHAN5G(120, 0),         CHAN5G(122, 0),
 200         CHAN5G(124, 0),         CHAN5G(126, 0),
 201         CHAN5G(128, 0),         CHAN5G(130, 0),
 202         CHAN5G(132, 0),         CHAN5G(134, 0),
 203         CHAN5G(136, 0),         CHAN5G(138, 0),
 204         CHAN5G(140, 0),         CHAN5G(142, 0),
 205         CHAN5G(144, 0),         CHAN5G(145, 0),
 206         CHAN5G(146, 0),         CHAN5G(147, 0),
 207         CHAN5G(148, 0),         CHAN5G(149, 0),
 208         CHAN5G(150, 0),         CHAN5G(151, 0),
 209         CHAN5G(152, 0),         CHAN5G(153, 0),
 210         CHAN5G(154, 0),         CHAN5G(155, 0),
 211         CHAN5G(156, 0),         CHAN5G(157, 0),
 212         CHAN5G(158, 0),         CHAN5G(159, 0),
 213         CHAN5G(160, 0),         CHAN5G(161, 0),
 214         CHAN5G(162, 0),         CHAN5G(163, 0),
 215         CHAN5G(164, 0),         CHAN5G(165, 0),
 216         CHAN5G(166, 0),         CHAN5G(168, 0),
 217         CHAN5G(170, 0),         CHAN5G(172, 0),
 218         CHAN5G(174, 0),         CHAN5G(176, 0),
 219         CHAN5G(178, 0),         CHAN5G(180, 0),
 220         CHAN5G(182, 0),         CHAN5G(184, 0),
 221         CHAN5G(186, 0),         CHAN5G(188, 0),
 222         CHAN5G(190, 0),         CHAN5G(192, 0),
 223         CHAN5G(194, 0),         CHAN5G(196, 0),
 224         CHAN5G(198, 0),         CHAN5G(200, 0),
 225         CHAN5G(202, 0),         CHAN5G(204, 0),
 226         CHAN5G(206, 0),         CHAN5G(208, 0),
 227         CHAN5G(210, 0),         CHAN5G(212, 0),
 228         CHAN5G(214, 0),         CHAN5G(216, 0),
 229         CHAN5G(218, 0),         CHAN5G(220, 0),
 230         CHAN5G(222, 0),         CHAN5G(224, 0),
 231         CHAN5G(226, 0),         CHAN5G(228, 0),
 232 };
 233
 234 static struct ieee80211_channel b43_5ghz_aphy_chantable[] = {
 235         CHAN5G(34, 0),          CHAN5G(36, 0),
 236         CHAN5G(38, 0),          CHAN5G(40, 0),
 237         CHAN5G(42, 0),          CHAN5G(44, 0),
 238         CHAN5G(46, 0),          CHAN5G(48, 0),
 239         CHAN5G(52, 0),          CHAN5G(56, 0),
 240         CHAN5G(60, 0),          CHAN5G(64, 0),
 241         CHAN5G(100, 0),         CHAN5G(104, 0),
 242         CHAN5G(108, 0),         CHAN5G(112, 0),
 243         CHAN5G(116, 0),         CHAN5G(120, 0),
 244         CHAN5G(124, 0),         CHAN5G(128, 0),
 245         CHAN5G(132, 0),         CHAN5G(136, 0),
 246         CHAN5G(140, 0),         CHAN5G(149, 0),
 247         CHAN5G(153, 0),         CHAN5G(157, 0),
 248         CHAN5G(161, 0),         CHAN5G(165, 0),
 249         CHAN5G(184, 0),         CHAN5G(188, 0),
 250         CHAN5G(192, 0),         CHAN5G(196, 0),
 251         CHAN5G(200, 0),         CHAN5G(204, 0),
 252         CHAN5G(208, 0),         CHAN5G(212, 0),
 253         CHAN5G(216, 0),
 254 };
 255 #undef CHAN5G
 256
 257 static struct ieee80211_supported_band b43_band_5GHz_nphy = {
 258         .band           = IEEE80211_BAND_5GHZ,
 259         .channels       = b43_5ghz_nphy_chantable,
 260         .n_channels     = ARRAY_SIZE(b43_5ghz_nphy_chantable),
 261         .bitrates       = b43_a_ratetable,
 262         .n_bitrates     = b43_a_ratetable_size,
 263 };
 264
 265 static struct ieee80211_supported_band b43_band_5GHz_aphy = {
 266         .band           = IEEE80211_BAND_5GHZ,
 267         .channels       = b43_5ghz_aphy_chantable,
 268         .n_channels     = ARRAY_SIZE(b43_5ghz_aphy_chantable),
 269         .bitrates       = b43_a_ratetable,
 270         .n_bitrates     = b43_a_ratetable_size,
 271 };
 272
 273 static struct ieee80211_supported_band b43_band_2GHz = {
 274         .band           = IEEE80211_BAND_2GHZ,
 275         .channels       = b43_2ghz_chantable,
 276         .n_channels     = ARRAY_SIZE(b43_2ghz_chantable),
 277         .bitrates       = b43_g_ratetable,
 278         .n_bitrates     = b43_g_ratetable_size,
 279 };
 280
 281 static void b43_wireless_core_exit(struct b43_wldev *dev);
 282 static int b43_wireless_core_init(struct b43_wldev *dev);
 283 static void b43_wireless_core_stop(struct b43_wldev *dev);
 284 static int b43_wireless_core_start(struct b43_wldev *dev);
 285
 286 static int b43_ratelimit(struct b43_wl *wl)
 287 {
 288         if (!wl || !wl->current_dev)
 289                 return 1;
 290         if (b43_status(wl->current_dev) < B43_STAT_STARTED)
 291                 return 1;
 292         /* We are up and running.
 293          * Ratelimit the messages to avoid DoS over the net. */
 294         return net_ratelimit();
 295 }
 296
 297 void b43info(struct b43_wl *wl, const char *fmt, ...)
 298 {
 299         va_list args;
 300
 301         if (!b43_ratelimit(wl))
 302                 return;
 303         va_start(args, fmt);
 304         printk(KERN_INFO "b43-%s: ",
 305                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 306         vprintk(fmt, args);
 307         va_end(args);
 308 }
 309
 310 void b43err(struct b43_wl *wl, const char *fmt, ...)
 311 {
 312         va_list args;
 313
 314         if (!b43_ratelimit(wl))
 315                 return;
 316         va_start(args, fmt);
 317         printk(KERN_ERR "b43-%s ERROR: ",
 318                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 319         vprintk(fmt, args);
 320         va_end(args);
 321 }
 322
 323 void b43warn(struct b43_wl *wl, const char *fmt, ...)
 324 {
 325         va_list args;
 326
 327         if (!b43_ratelimit(wl))
 328                 return;
 329         va_start(args, fmt);
 330         printk(KERN_WARNING "b43-%s warning: ",
 331                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 332         vprintk(fmt, args);
 333         va_end(args);
 334 }
 335
 336 #if B43_DEBUG
 337 void b43dbg(struct b43_wl *wl, const char *fmt, ...)
 338 {
 339         va_list args;
 340
 341         va_start(args, fmt);
 342         printk(KERN_DEBUG "b43-%s debug: ",
 343                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 344         vprintk(fmt, args);
 345         va_end(args);
 346 }
 347 #endif /* DEBUG */
 348
 349 static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val)
 350 {
 351         u32 macctl;
 352
 353         B43_WARN_ON(offset % 4 != 0);
 354
 355         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 356         if (macctl & B43_MACCTL_BE)
 357                 val = swab32(val);
 358
 359         b43_write32(dev, B43_MMIO_RAM_CONTROL, offset);
 360         mmiowb();
 361         b43_write32(dev, B43_MMIO_RAM_DATA, val);
 362 }
 363
 364 static inline void b43_shm_control_word(struct b43_wldev *dev,
 365                                         u16 routing, u16 offset)
 366 {
 367         u32 control;
 368
 369         /* "offset" is the WORD offset. */
 370         control = routing;
 371         control <<= 16;
 372         control |= offset;
 373         b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
 374 }
 375
 376 u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 377 {
 378         struct b43_wl *wl = dev->wl;
 379         unsigned long flags;
 380         u32 ret;
 381
 382         spin_lock_irqsave(&wl->shm_lock, flags);
 383         if (routing == B43_SHM_SHARED) {
 384                 B43_WARN_ON(offset & 0x0001);
 385                 if (offset & 0x0003) {
 386                         /* Unaligned access */
 387                         b43_shm_control_word(dev, routing, offset >> 2);
 388                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 389                         ret <<= 16;
 390                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 391                         ret |= b43_read16(dev, B43_MMIO_SHM_DATA);
 392
 393                         goto out;
 394                 }
 395                 offset >>= 2;
 396         }
 397         b43_shm_control_word(dev, routing, offset);
 398         ret = b43_read32(dev, B43_MMIO_SHM_DATA);
 399 out:
 400         spin_unlock_irqrestore(&wl->shm_lock, flags);
 401
 402         return ret;
 403 }
 404
 405 u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset)
 406 {
 407         struct b43_wl *wl = dev->wl;
 408         unsigned long flags;
 409         u16 ret;
 410
 411         spin_lock_irqsave(&wl->shm_lock, flags);
 412         if (routing == B43_SHM_SHARED) {
 413                 B43_WARN_ON(offset & 0x0001);
 414                 if (offset & 0x0003) {
 415                         /* Unaligned access */
 416                         b43_shm_control_word(dev, routing, offset >> 2);
 417                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 418
 419                         goto out;
 420                 }
 421                 offset >>= 2;
 422         }
 423         b43_shm_control_word(dev, routing, offset);
 424         ret = b43_read16(dev, B43_MMIO_SHM_DATA);
 425 out:
 426         spin_unlock_irqrestore(&wl->shm_lock, flags);
 427
 428         return ret;
 429 }
 430
 431 void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 432 {
 433         struct b43_wl *wl = dev->wl;
 434         unsigned long flags;
 435
 436         spin_lock_irqsave(&wl->shm_lock, flags);
 437         if (routing == B43_SHM_SHARED) {
 438                 B43_WARN_ON(offset & 0x0001);
 439                 if (offset & 0x0003) {
 440                         /* Unaligned access */
 441                         b43_shm_control_word(dev, routing, offset >> 2);
 442                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED,
 443                                     (value >> 16) & 0xffff);
 444                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 445                         b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff);
 446                         goto out;
 447                 }
 448                 offset >>= 2;
 449         }
 450         b43_shm_control_word(dev, routing, offset);
 451         b43_write32(dev, B43_MMIO_SHM_DATA, value);
 452 out:
 453         spin_unlock_irqrestore(&wl->shm_lock, flags);
 454 }
 455
 456 void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
 457 {
 458         struct b43_wl *wl = dev->wl;
 459         unsigned long flags;
 460
 461         spin_lock_irqsave(&wl->shm_lock, flags);
 462         if (routing == B43_SHM_SHARED) {
 463                 B43_WARN_ON(offset & 0x0001);
 464                 if (offset & 0x0003) {
 465                         /* Unaligned access */
 466                         b43_shm_control_word(dev, routing, offset >> 2);
 467                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
 468                         goto out;
 469                 }
 470                 offset >>= 2;
 471         }
 472         b43_shm_control_word(dev, routing, offset);
 473         b43_write16(dev, B43_MMIO_SHM_DATA, value);
 474 out:
 475         spin_unlock_irqrestore(&wl->shm_lock, flags);
 476 }
 477
 478 /* Read HostFlags */
 479 u64 b43_hf_read(struct b43_wldev * dev)
 480 {
 481         u64 ret;
 482
 483         ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI);
 484         ret <<= 16;
 485         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI);
 486         ret <<= 16;
 487         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO);
 488
 489         return ret;
 490 }
 491
 492 /* Write HostFlags */
 493 void b43_hf_write(struct b43_wldev *dev, u64 value)
 494 {
 495         u16 lo, mi, hi;
 496
 497         lo = (value & 0x00000000FFFFULL);
 498         mi = (value & 0x0000FFFF0000ULL) >> 16;
 499         hi = (value & 0xFFFF00000000ULL) >> 32;
 500         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO, lo);
 501         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI, mi);
 502         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
 503 }
 504
 505 void b43_tsf_read(struct b43_wldev *dev, u64 * tsf)
 506 {
 507         /* We need to be careful. As we read the TSF from multiple
 508          * registers, we should take care of register overflows.
 509          * In theory, the whole tsf read process should be atomic.
 510          * We try to be atomic here, by restaring the read process,
 511          * if any of the high registers changed (overflew).
 512          */
 513         if (dev->dev->id.revision >= 3) {
 514                 u32 low, high, high2;
 515
 516                 do {
 517                         high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 518                         low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW);
 519                         high2 = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 520                 } while (unlikely(high != high2));
 521
 522                 *tsf = high;
 523                 *tsf <<= 32;
 524                 *tsf |= low;
 525         } else {
 526                 u64 tmp;
 527                 u16 v0, v1, v2, v3;
 528                 u16 test1, test2, test3;
 529
 530                 do {
 531                         v3 = b43_read16(dev, B43_MMIO_TSF_3);
 532                         v2 = b43_read16(dev, B43_MMIO_TSF_2);
 533                         v1 = b43_read16(dev, B43_MMIO_TSF_1);
 534                         v0 = b43_read16(dev, B43_MMIO_TSF_0);
 535
 536                         test3 = b43_read16(dev, B43_MMIO_TSF_3);
 537                         test2 = b43_read16(dev, B43_MMIO_TSF_2);
 538                         test1 = b43_read16(dev, B43_MMIO_TSF_1);
 539                 } while (v3 != test3 || v2 != test2 || v1 != test1);
 540
 541                 *tsf = v3;
 542                 *tsf <<= 48;
 543                 tmp = v2;
 544                 tmp <<= 32;
 545                 *tsf |= tmp;
 546                 tmp = v1;
 547                 tmp <<= 16;
 548                 *tsf |= tmp;
 549                 *tsf |= v0;
 550         }
 551 }
 552
 553 static void b43_time_lock(struct b43_wldev *dev)
 554 {
 555         u32 macctl;
 556
 557         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 558         macctl |= B43_MACCTL_TBTTHOLD;
 559         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 560         /* Commit the write */
 561         b43_read32(dev, B43_MMIO_MACCTL);
 562 }
 563
 564 static void b43_time_unlock(struct b43_wldev *dev)
 565 {
 566         u32 macctl;
 567
 568         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 569         macctl &= ~B43_MACCTL_TBTTHOLD;
 570         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 571         /* Commit the write */
 572         b43_read32(dev, B43_MMIO_MACCTL);
 573 }
 574
 575 static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
 576 {
 577         /* Be careful with the in-progress timer.
 578          * First zero out the low register, so we have a full
 579          * register-overflow duration to complete the operation.
 580          */
 581         if (dev->dev->id.revision >= 3) {
 582                 u32 lo = (tsf & 0x00000000FFFFFFFFULL);
 583                 u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32;
 584
 585                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, 0);
 586                 mmiowb();
 587                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, hi);
 588                 mmiowb();
 589                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, lo);
 590         } else {
 591                 u16 v0 = (tsf & 0x000000000000FFFFULL);
 592                 u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16;
 593                 u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32;
 594                 u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48;
 595
 596                 b43_write16(dev, B43_MMIO_TSF_0, 0);
 597                 mmiowb();
 598                 b43_write16(dev, B43_MMIO_TSF_3, v3);
 599                 mmiowb();
 600                 b43_write16(dev, B43_MMIO_TSF_2, v2);
 601                 mmiowb();
 602                 b43_write16(dev, B43_MMIO_TSF_1, v1);
 603                 mmiowb();
 604                 b43_write16(dev, B43_MMIO_TSF_0, v0);
 605         }
 606 }
 607
 608 void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
 609 {
 610         b43_time_lock(dev);
 611         b43_tsf_write_locked(dev, tsf);
 612         b43_time_unlock(dev);
 613 }
 614
 615 static
 616 void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac)
 617 {
 618         static const u8 zero_addr[ETH_ALEN] = { 0 };
 619         u16 data;
 620
 621         if (!mac)
 622                 mac = zero_addr;
 623
 624         offset |= 0x0020;
 625         b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset);
 626
 627         data = mac[0];
 628         data |= mac[1] << 8;
 629         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 630         data = mac[2];
 631         data |= mac[3] << 8;
 632         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 633         data = mac[4];
 634         data |= mac[5] << 8;
 635         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 636 }
 637
 638 static void b43_write_mac_bssid_templates(struct b43_wldev *dev)
 639 {
 640         const u8 *mac;
 641         const u8 *bssid;
 642         u8 mac_bssid[ETH_ALEN * 2];
 643         int i;
 644         u32 tmp;
 645
 646         bssid = dev->wl->bssid;
 647         mac = dev->wl->mac_addr;
 648
 649         b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid);
 650
 651         memcpy(mac_bssid, mac, ETH_ALEN);
 652         memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
 653
 654         /* Write our MAC address and BSSID to template ram */
 655         for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
 656                 tmp = (u32) (mac_bssid[i + 0]);
 657                 tmp |= (u32) (mac_bssid[i + 1]) << 8;
 658                 tmp |= (u32) (mac_bssid[i + 2]) << 16;
 659                 tmp |= (u32) (mac_bssid[i + 3]) << 24;
 660                 b43_ram_write(dev, 0x20 + i, tmp);
 661         }
 662 }
 663
 664 static void b43_upload_card_macaddress(struct b43_wldev *dev)
 665 {
 666         b43_write_mac_bssid_templates(dev);
 667         b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr);
 668 }
 669
 670 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 671 {
 672         /* slot_time is in usec. */
 673         if (dev->phy.type != B43_PHYTYPE_G)
 674                 return;
 675         b43_write16(dev, 0x684, 510 + slot_time);
 676         b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
 677 }
 678
 679 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
 680 {
 681         b43_set_slot_time(dev, 9);
 682         dev->short_slot = 1;
 683 }
 684
 685 static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 686 {
 687         b43_set_slot_time(dev, 20);
 688         dev->short_slot = 0;
 689 }
 690
 691 /* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
 692  * Returns the _previously_ enabled IRQ mask.
 693  */
 694 static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask)
 695 {
 696         u32 old_mask;
 697
 698         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 699         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask);
 700
 701         return old_mask;
 702 }
 703
 704 /* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
 705  * Returns the _previously_ enabled IRQ mask.
 706  */
 707 static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask)
 708 {
 709         u32 old_mask;
 710
 711         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 712         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
 713
 714         return old_mask;
 715 }
 716
 717 /* Synchronize IRQ top- and bottom-half.
 718  * IRQs must be masked before calling this.
 719  * This must not be called with the irq_lock held.
 720  */
 721 static void b43_synchronize_irq(struct b43_wldev *dev)
 722 {
 723         synchronize_irq(dev->dev->irq);
 724         tasklet_kill(&dev->isr_tasklet);
 725 }
 726
 727 /* DummyTransmission function, as documented on
 728  * http://bcm-specs.sipsolutions.net/DummyTransmission
 729  */
 730 void b43_dummy_transmission(struct b43_wldev *dev)
 731 {
 732         struct b43_wl *wl = dev->wl;
 733         struct b43_phy *phy = &dev->phy;
 734         unsigned int i, max_loop;
 735         u16 value;
 736         u32 buffer[5] = {
 737                 0x00000000,
 738                 0x00D40000,
 739                 0x00000000,
 740                 0x01000000,
 741                 0x00000000,
 742         };
 743
 744         switch (phy->type) {
 745         case B43_PHYTYPE_A:
 746                 max_loop = 0x1E;
 747                 buffer[0] = 0x000201CC;
 748                 break;
 749         case B43_PHYTYPE_B:
 750         case B43_PHYTYPE_G:
 751                 max_loop = 0xFA;
 752                 buffer[0] = 0x000B846E;
 753                 break;
 754         default:
 755                 B43_WARN_ON(1);
 756                 return;
 757         }
 758
 759         spin_lock_irq(&wl->irq_lock);
 760         write_lock(&wl->tx_lock);
 761
 762         for (i = 0; i < 5; i++)
 763                 b43_ram_write(dev, i * 4, buffer[i]);
 764
 765         /* Commit writes */
 766         b43_read32(dev, B43_MMIO_MACCTL);
 767
 768         b43_write16(dev, 0x0568, 0x0000);
 769         b43_write16(dev, 0x07C0, 0x0000);
 770         value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0);
 771         b43_write16(dev, 0x050C, value);
 772         b43_write16(dev, 0x0508, 0x0000);
 773         b43_write16(dev, 0x050A, 0x0000);
 774         b43_write16(dev, 0x054C, 0x0000);
 775         b43_write16(dev, 0x056A, 0x0014);
 776         b43_write16(dev, 0x0568, 0x0826);
 777         b43_write16(dev, 0x0500, 0x0000);
 778         b43_write16(dev, 0x0502, 0x0030);
 779
 780         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 781                 b43_radio_write16(dev, 0x0051, 0x0017);
 782         for (i = 0x00; i < max_loop; i++) {
 783                 value = b43_read16(dev, 0x050E);
 784                 if (value & 0x0080)
 785                         break;
 786                 udelay(10);
 787         }
 788         for (i = 0x00; i < 0x0A; i++) {
 789                 value = b43_read16(dev, 0x050E);
 790                 if (value & 0x0400)
 791                         break;
 792                 udelay(10);
 793         }
 794         for (i = 0x00; i < 0x0A; i++) {
 795                 value = b43_read16(dev, 0x0690);
 796                 if (!(value & 0x0100))
 797                         break;
 798                 udelay(10);
 799         }
 800         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 801                 b43_radio_write16(dev, 0x0051, 0x0037);
 802
 803         write_unlock(&wl->tx_lock);
 804         spin_unlock_irq(&wl->irq_lock);
 805 }
 806
 807 static void key_write(struct b43_wldev *dev,
 808                       u8 index, u8 algorithm, const u8 * key)
 809 {
 810         unsigned int i;
 811         u32 offset;
 812         u16 value;
 813         u16 kidx;
 814
 815         /* Key index/algo block */
 816         kidx = b43_kidx_to_fw(dev, index);
 817         value = ((kidx << 4) | algorithm);
 818         b43_shm_write16(dev, B43_SHM_SHARED,
 819                         B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value);
 820
 821         /* Write the key to the Key Table Pointer offset */
 822         offset = dev->ktp + (index * B43_SEC_KEYSIZE);
 823         for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
 824                 value = key[i];
 825                 value |= (u16) (key[i + 1]) << 8;
 826                 b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value);
 827         }
 828 }
 829
 830 static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr)
 831 {
 832         u32 addrtmp[2] = { 0, 0, };
 833         u8 per_sta_keys_start = 8;
 834
 835         if (b43_new_kidx_api(dev))
 836                 per_sta_keys_start = 4;
 837
 838         B43_WARN_ON(index < per_sta_keys_start);
 839         /* We have two default TX keys and possibly two default RX keys.
 840          * Physical mac 0 is mapped to physical key 4 or 8, depending
 841          * on the firmware version.
 842          * So we must adjust the index here.
 843          */
 844         index -= per_sta_keys_start;
 845
 846         if (addr) {
 847                 addrtmp[0] = addr[0];
 848                 addrtmp[0] |= ((u32) (addr[1]) << 8);
 849                 addrtmp[0] |= ((u32) (addr[2]) << 16);
 850                 addrtmp[0] |= ((u32) (addr[3]) << 24);
 851                 addrtmp[1] = addr[4];
 852                 addrtmp[1] |= ((u32) (addr[5]) << 8);
 853         }
 854
 855         if (dev->dev->id.revision >= 5) {
 856                 /* Receive match transmitter address mechanism */
 857                 b43_shm_write32(dev, B43_SHM_RCMTA,
 858                                 (index * 2) + 0, addrtmp[0]);
 859                 b43_shm_write16(dev, B43_SHM_RCMTA,
 860                                 (index * 2) + 1, addrtmp[1]);
 861         } else {
 862                 /* RXE (Receive Engine) and
 863                  * PSM (Programmable State Machine) mechanism
 864                  */
 865                 if (index < 8) {
 866                         /* TODO write to RCM 16, 19, 22 and 25 */
 867                 } else {
 868                         b43_shm_write32(dev, B43_SHM_SHARED,
 869                                         B43_SHM_SH_PSM + (index * 6) + 0,
 870                                         addrtmp[0]);
 871                         b43_shm_write16(dev, B43_SHM_SHARED,
 872                                         B43_SHM_SH_PSM + (index * 6) + 4,
 873                                         addrtmp[1]);
 874                 }
 875         }
 876 }
 877
 878 static void do_key_write(struct b43_wldev *dev,
 879                          u8 index, u8 algorithm,
 880                          const u8 * key, size_t key_len, const u8 * mac_addr)
 881 {
 882         u8 buf[B43_SEC_KEYSIZE] = { 0, };
 883         u8 per_sta_keys_start = 8;
 884
 885         if (b43_new_kidx_api(dev))
 886                 per_sta_keys_start = 4;
 887
 888         B43_WARN_ON(index >= dev->max_nr_keys);
 889         B43_WARN_ON(key_len > B43_SEC_KEYSIZE);
 890
 891         if (index >= per_sta_keys_start)
 892                 keymac_write(dev, index, NULL); /* First zero out mac. */
 893         if (key)
 894                 memcpy(buf, key, key_len);
 895         key_write(dev, index, algorithm, buf);
 896         if (index >= per_sta_keys_start)
 897                 keymac_write(dev, index, mac_addr);
 898
 899         dev->key[index].algorithm = algorithm;
 900 }
 901
 902 static int b43_key_write(struct b43_wldev *dev,
 903                          int index, u8 algorithm,
 904                          const u8 * key, size_t key_len,
 905                          const u8 * mac_addr,
 906                          struct ieee80211_key_conf *keyconf)
 907 {
 908         int i;
 909         int sta_keys_start;
 910
 911         if (key_len > B43_SEC_KEYSIZE)
 912                 return -EINVAL;
 913         for (i = 0; i < dev->max_nr_keys; i++) {
 914                 /* Check that we don't already have this key. */
 915                 B43_WARN_ON(dev->key[i].keyconf == keyconf);
 916         }
 917         if (index < 0) {
 918                 /* Either pairwise key or address is 00:00:00:00:00:00
 919                  * for transmit-only keys. Search the index. */
 920                 if (b43_new_kidx_api(dev))
 921                         sta_keys_start = 4;
 922                 else
 923                         sta_keys_start = 8;
 924                 for (i = sta_keys_start; i < dev->max_nr_keys; i++) {
 925                         if (!dev->key[i].keyconf) {
 926                                 /* found empty */
 927                                 index = i;
 928                                 break;
 929                         }
 930                 }
 931                 if (index < 0) {
 932                         b43err(dev->wl, "Out of hardware key memory\n");
 933                         return -ENOSPC;
 934                 }
 935         } else
 936                 B43_WARN_ON(index > 3);
 937
 938         do_key_write(dev, index, algorithm, key, key_len, mac_addr);
 939         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 940                 /* Default RX key */
 941                 B43_WARN_ON(mac_addr);
 942                 do_key_write(dev, index + 4, algorithm, key, key_len, NULL);
 943         }
 944         keyconf->hw_key_idx = index;
 945         dev->key[index].keyconf = keyconf;
 946
 947         return 0;
 948 }
 949
 950 static int b43_key_clear(struct b43_wldev *dev, int index)
 951 {
 952         if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys)))
 953                 return -EINVAL;
 954         do_key_write(dev, index, B43_SEC_ALGO_NONE,
 955                      NULL, B43_SEC_KEYSIZE, NULL);
 956         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 957                 do_key_write(dev, index + 4, B43_SEC_ALGO_NONE,
 958                              NULL, B43_SEC_KEYSIZE, NULL);
 959         }
 960         dev->key[index].keyconf = NULL;
 961
 962         return 0;
 963 }
 964
 965 static void b43_clear_keys(struct b43_wldev *dev)
 966 {
 967         int i;
 968
 969         for (i = 0; i < dev->max_nr_keys; i++)
 970                 b43_key_clear(dev, i);
 971 }
 972
 973 void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 974 {
 975         u32 macctl;
 976         u16 ucstat;
 977         bool hwps;
 978         bool awake;
 979         int i;
 980
 981         B43_WARN_ON((ps_flags & B43_PS_ENABLED) &&
 982                     (ps_flags & B43_PS_DISABLED));
 983         B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP));
 984
 985         if (ps_flags & B43_PS_ENABLED) {
 986                 hwps = 1;
 987         } else if (ps_flags & B43_PS_DISABLED) {
 988                 hwps = 0;
 989         } else {
 990                 //TODO: If powersave is not off and FIXME is not set and we are not in adhoc
 991                 //      and thus is not an AP and we are associated, set bit 25
 992         }
 993         if (ps_flags & B43_PS_AWAKE) {
 994                 awake = 1;
 995         } else if (ps_flags & B43_PS_ASLEEP) {
 996                 awake = 0;
 997         } else {
 998                 //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
 999                 //      or we are associated, or FIXME, or the latest PS-Poll packet sent was
1000                 //      successful, set bit26
1001         }
1002
1003 /* FIXME: For now we force awake-on and hwps-off */
1004         hwps = 0;
1005         awake = 1;
1006
1007         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1008         if (hwps)
1009                 macctl |= B43_MACCTL_HWPS;
1010         else
1011                 macctl &= ~B43_MACCTL_HWPS;
1012         if (awake)
1013                 macctl |= B43_MACCTL_AWAKE;
1014         else
1015                 macctl &= ~B43_MACCTL_AWAKE;
1016         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1017         /* Commit write */
1018         b43_read32(dev, B43_MMIO_MACCTL);
1019         if (awake && dev->dev->id.revision >= 5) {
1020                 /* Wait for the microcode to wake up. */
1021                 for (i = 0; i < 100; i++) {
1022                         ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
1023                                                 B43_SHM_SH_UCODESTAT);
1024                         if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP)
1025                                 break;
1026                         udelay(10);
1027                 }
1028         }
1029 }
1030
1031 /* Turn the Analog ON/OFF */
1032 static void b43_switch_analog(struct b43_wldev *dev, int on)
1033 {
1034         switch (dev->phy.type) {
1035         case B43_PHYTYPE_A:
1036         case B43_PHYTYPE_G:
1037                 b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
1038                 break;
1039         case B43_PHYTYPE_N:
1040                 b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
1041                               on ? 0 : 0x7FFF);
1042                 break;
1043         default:
1044                 B43_WARN_ON(1);
1045         }
1046 }
1047
1048 void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
1049 {
1050         u32 tmslow;
1051         u32 macctl;
1052
1053         flags |= B43_TMSLOW_PHYCLKEN;
1054         flags |= B43_TMSLOW_PHYRESET;
1055         ssb_device_enable(dev->dev, flags);
1056         msleep(2);              /* Wait for the PLL to turn on. */
1057
1058         /* Now take the PHY out of Reset again */
1059         tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
1060         tmslow |= SSB_TMSLOW_FGC;
1061         tmslow &= ~B43_TMSLOW_PHYRESET;
1062         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
1063         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
1064         msleep(1);
1065         tmslow &= ~SSB_TMSLOW_FGC;
1066         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
1067         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
1068         msleep(1);
1069
1070         /* Turn Analog ON */
1071         b43_switch_analog(dev, 1);
1072
1073         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1074         macctl &= ~B43_MACCTL_GMODE;
1075         if (flags & B43_TMSLOW_GMODE)
1076                 macctl |= B43_MACCTL_GMODE;
1077         macctl |= B43_MACCTL_IHR_ENABLED;
1078         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1079 }
1080
1081 static void handle_irq_transmit_status(struct b43_wldev *dev)
1082 {
1083         u32 v0, v1;
1084         u16 tmp;
1085         struct b43_txstatus stat;
1086
1087         while (1) {
1088                 v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1089                 if (!(v0 & 0x00000001))
1090                         break;
1091                 v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1092
1093                 stat.cookie = (v0 >> 16);
1094                 stat.seq = (v1 & 0x0000FFFF);
1095                 stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
1096                 tmp = (v0 & 0x0000FFFF);
1097                 stat.frame_count = ((tmp & 0xF000) >> 12);
1098                 stat.rts_count = ((tmp & 0x0F00) >> 8);
1099                 stat.supp_reason = ((tmp & 0x001C) >> 2);
1100                 stat.pm_indicated = !!(tmp & 0x0080);
1101                 stat.intermediate = !!(tmp & 0x0040);
1102                 stat.for_ampdu = !!(tmp & 0x0020);
1103                 stat.acked = !!(tmp & 0x0002);
1104
1105                 b43_handle_txstatus(dev, &stat);
1106         }
1107 }
1108
1109 static void drain_txstatus_queue(struct b43_wldev *dev)
1110 {
1111         u32 dummy;
1112
1113         if (dev->dev->id.revision < 5)
1114                 return;
1115         /* Read all entries from the microcode TXstatus FIFO
1116          * and throw them away.
1117          */
1118         while (1) {
1119                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1120                 if (!(dummy & 0x00000001))
1121                         break;
1122                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1123         }
1124 }
1125
1126 static u32 b43_jssi_read(struct b43_wldev *dev)
1127 {
1128         u32 val = 0;
1129
1130         val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A);
1131         val <<= 16;
1132         val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088);
1133
1134         return val;
1135 }
1136
1137 static void b43_jssi_write(struct b43_wldev *dev, u32 jssi)
1138 {
1139         b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF));
1140         b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16);
1141 }
1142
1143 static void b43_generate_noise_sample(struct b43_wldev *dev)
1144 {
1145         b43_jssi_write(dev, 0x7F7F7F7F);
1146         b43_write32(dev, B43_MMIO_MACCMD,
1147                     b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
1148 }
1149
1150 static void b43_calculate_link_quality(struct b43_wldev *dev)
1151 {
1152         /* Top half of Link Quality calculation. */
1153
1154         if (dev->noisecalc.calculation_running)
1155                 return;
1156         dev->noisecalc.calculation_running = 1;
1157         dev->noisecalc.nr_samples = 0;
1158
1159         b43_generate_noise_sample(dev);
1160 }
1161
1162 static void handle_irq_noise(struct b43_wldev *dev)
1163 {
1164         struct b43_phy *phy = &dev->phy;
1165         u16 tmp;
1166         u8 noise[4];
1167         u8 i, j;
1168         s32 average;
1169
1170         /* Bottom half of Link Quality calculation. */
1171
1172         /* Possible race condition: It might be possible that the user
1173          * changed to a different channel in the meantime since we
1174          * started the calculation. We ignore that fact, since it's
1175          * not really that much of a problem. The background noise is
1176          * an estimation only anyway. Slightly wrong results will get damped
1177          * by the averaging of the 8 sample rounds. Additionally the
1178          * value is shortlived. So it will be replaced by the next noise
1179          * calculation round soon. */
1180
1181         B43_WARN_ON(!dev->noisecalc.calculation_running);
1182         *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
1183         if (noise[0] == 0x7F || noise[1] == 0x7F ||
1184             noise[2] == 0x7F || noise[3] == 0x7F)
1185                 goto generate_new;
1186
1187         /* Get the noise samples. */
1188         B43_WARN_ON(dev->noisecalc.nr_samples >= 8);
1189         i = dev->noisecalc.nr_samples;
1190         noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1191         noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1192         noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1193         noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1194         dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
1195         dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
1196         dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
1197         dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
1198         dev->noisecalc.nr_samples++;
1199         if (dev->noisecalc.nr_samples == 8) {
1200                 /* Calculate the Link Quality by the noise samples. */
1201                 average = 0;
1202                 for (i = 0; i < 8; i++) {
1203                         for (j = 0; j < 4; j++)
1204                                 average += dev->noisecalc.samples[i][j];
1205                 }
1206                 average /= (8 * 4);
1207                 average *= 125;
1208                 average += 64;
1209                 average /= 128;
1210                 tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C);
1211                 tmp = (tmp / 128) & 0x1F;
1212                 if (tmp >= 8)
1213                         average += 2;
1214                 else
1215                         average -= 25;
1216                 if (tmp == 8)
1217                         average -= 72;
1218                 else
1219                         average -= 48;
1220
1221                 dev->stats.link_noise = average;
1222                 dev->noisecalc.calculation_running = 0;
1223                 return;
1224         }
1225 generate_new:
1226         b43_generate_noise_sample(dev);
1227 }
1228
1229 static void handle_irq_tbtt_indication(struct b43_wldev *dev)
1230 {
1231         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) {
1232                 ///TODO: PS TBTT
1233         } else {
1234                 if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
1235                         b43_power_saving_ctl_bits(dev, 0);
1236         }
1237         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
1238                 dev->dfq_valid = 1;
1239 }
1240
1241 static void handle_irq_atim_end(struct b43_wldev *dev)
1242 {
1243         if (dev->dfq_valid) {
1244                 b43_write32(dev, B43_MMIO_MACCMD,
1245                             b43_read32(dev, B43_MMIO_MACCMD)
1246                             | B43_MACCMD_DFQ_VALID);
1247                 dev->dfq_valid = 0;
1248         }
1249 }
1250
1251 static void handle_irq_pmq(struct b43_wldev *dev)
1252 {
1253         u32 tmp;
1254
1255         //TODO: AP mode.
1256
1257         while (1) {
1258                 tmp = b43_read32(dev, B43_MMIO_PS_STATUS);
1259                 if (!(tmp & 0x00000008))
1260                         break;
1261         }
1262         /* 16bit write is odd, but correct. */
1263         b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002);
1264 }
1265
1266 static void b43_write_template_common(struct b43_wldev *dev,
1267                                       const u8 * data, u16 size,
1268                                       u16 ram_offset,
1269                                       u16 shm_size_offset, u8 rate)
1270 {
1271         u32 i, tmp;
1272         struct b43_plcp_hdr4 plcp;
1273
1274         plcp.data = 0;
1275         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
1276         b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
1277         ram_offset += sizeof(u32);
1278         /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
1279          * So leave the first two bytes of the next write blank.
1280          */
1281         tmp = (u32) (data[0]) << 16;
1282         tmp |= (u32) (data[1]) << 24;
1283         b43_ram_write(dev, ram_offset, tmp);
1284         ram_offset += sizeof(u32);
1285         for (i = 2; i < size; i += sizeof(u32)) {
1286                 tmp = (u32) (data[i + 0]);
1287                 if (i + 1 < size)
1288                         tmp |= (u32) (data[i + 1]) << 8;
1289                 if (i + 2 < size)
1290                         tmp |= (u32) (data[i + 2]) << 16;
1291                 if (i + 3 < size)
1292                         tmp |= (u32) (data[i + 3]) << 24;
1293                 b43_ram_write(dev, ram_offset + i - 2, tmp);
1294         }
1295         b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset,
1296                         size + sizeof(struct b43_plcp_hdr6));
1297 }
1298
1299 /* Check if the use of the antenna that ieee80211 told us to
1300  * use is possible. This will fall back to DEFAULT.
1301  * "antenna_nr" is the antenna identifier we got from ieee80211. */
1302 u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
1303                                   u8 antenna_nr)
1304 {
1305         u8 antenna_mask;
1306
1307         if (antenna_nr == 0) {
1308                 /* Zero means "use default antenna". That's always OK. */
1309                 return 0;
1310         }
1311
1312         /* Get the mask of available antennas. */
1313         if (dev->phy.gmode)
1314                 antenna_mask = dev->dev->bus->sprom.ant_available_bg;
1315         else
1316                 antenna_mask = dev->dev->bus->sprom.ant_available_a;
1317
1318         if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
1319                 /* This antenna is not available. Fall back to default. */
1320                 return 0;
1321         }
1322
1323         return antenna_nr;
1324 }
1325
1326 static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna)
1327 {
1328         antenna = b43_ieee80211_antenna_sanitize(dev, antenna);
1329         switch (antenna) {
1330         case 0:         /* default/diversity */
1331                 return B43_ANTENNA_DEFAULT;
1332         case 1:         /* Antenna 0 */
1333                 return B43_ANTENNA0;
1334         case 2:         /* Antenna 1 */
1335                 return B43_ANTENNA1;
1336         case 3:         /* Antenna 2 */
1337                 return B43_ANTENNA2;
1338         case 4:         /* Antenna 3 */
1339                 return B43_ANTENNA3;
1340         default:
1341                 return B43_ANTENNA_DEFAULT;
1342         }
1343 }
1344
1345 /* Convert a b43 antenna number value to the PHY TX control value. */
1346 static u16 b43_antenna_to_phyctl(int antenna)
1347 {
1348         switch (antenna) {
1349         case B43_ANTENNA0:
1350                 return B43_TXH_PHY_ANT0;
1351         case B43_ANTENNA1:
1352                 return B43_TXH_PHY_ANT1;
1353         case B43_ANTENNA2:
1354                 return B43_TXH_PHY_ANT2;
1355         case B43_ANTENNA3:
1356                 return B43_TXH_PHY_ANT3;
1357         case B43_ANTENNA_AUTO:
1358                 return B43_TXH_PHY_ANT01AUTO;
1359         }
1360         B43_WARN_ON(1);
1361         return 0;
1362 }
1363
1364 static void b43_write_beacon_template(struct b43_wldev *dev,
1365                                       u16 ram_offset,
1366                                       u16 shm_size_offset)
1367 {
1368         unsigned int i, len, variable_len;
1369         const struct ieee80211_mgmt *bcn;
1370         const u8 *ie;
1371         bool tim_found = 0;
1372         unsigned int rate;
1373         u16 ctl;
1374         int antenna;
1375
1376         bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
1377         len = min((size_t) dev->wl->current_beacon->len,
1378                   0x200 - sizeof(struct b43_plcp_hdr6));
1379         rate = dev->wl->beacon_txctl.tx_rate->hw_value;
1380
1381         b43_write_template_common(dev, (const u8 *)bcn,
1382                                   len, ram_offset, shm_size_offset, rate);
1383
1384         /* Write the PHY TX control parameters. */
1385         antenna = b43_antenna_from_ieee80211(dev,
1386                         dev->wl->beacon_txctl.antenna_sel_tx);
1387         antenna = b43_antenna_to_phyctl(antenna);
1388         ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
1389         /* We can't send beacons with short preamble. Would get PHY errors. */
1390         ctl &= ~B43_TXH_PHY_SHORTPRMBL;
1391         ctl &= ~B43_TXH_PHY_ANT;
1392         ctl &= ~B43_TXH_PHY_ENC;
1393         ctl |= antenna;
1394         if (b43_is_cck_rate(rate))
1395                 ctl |= B43_TXH_PHY_ENC_CCK;
1396         else
1397                 ctl |= B43_TXH_PHY_ENC_OFDM;
1398         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
1399
1400         /* Find the position of the TIM and the DTIM_period value
1401          * and write them to SHM. */
1402         ie = bcn->u.beacon.variable;
1403         variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
1404         for (i = 0; i < variable_len - 2; ) {
1405                 uint8_t ie_id, ie_len;
1406
1407                 ie_id = ie[i];
1408                 ie_len = ie[i + 1];
1409                 if (ie_id == 5) {
1410                         u16 tim_position;
1411                         u16 dtim_period;
1412                         /* This is the TIM Information Element */
1413
1414                         /* Check whether the ie_len is in the beacon data range. */
1415                         if (variable_len < ie_len + 2 + i)
1416                                 break;
1417                         /* A valid TIM is at least 4 bytes long. */
1418                         if (ie_len < 4)
1419                                 break;
1420                         tim_found = 1;
1421
1422                         tim_position = sizeof(struct b43_plcp_hdr6);
1423                         tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable);
1424                         tim_position += i;
1425
1426                         dtim_period = ie[i + 3];
1427
1428                         b43_shm_write16(dev, B43_SHM_SHARED,
1429                                         B43_SHM_SH_TIMBPOS, tim_position);
1430                         b43_shm_write16(dev, B43_SHM_SHARED,
1431                                         B43_SHM_SH_DTIMPER, dtim_period);
1432                         break;
1433                 }
1434                 i += ie_len + 2;
1435         }
1436         if (!tim_found) {
1437                 b43warn(dev->wl, "Did not find a valid TIM IE in "
1438                         "the beacon template packet. AP or IBSS operation "
1439                         "may be broken.\n");
1440         } else
1441                 b43dbg(dev->wl, "Updated beacon template\n");
1442 }
1443
1444 static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
1445                                       u16 shm_offset, u16 size,
1446                                       struct ieee80211_rate *rate)
1447 {
1448         struct b43_plcp_hdr4 plcp;
1449         u32 tmp;
1450         __le16 dur;
1451
1452         plcp.data = 0;
1453         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
1454         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1455                                                dev->wl->vif, size,
1456                                                rate);
1457         /* Write PLCP in two parts and timing for packet transfer */
1458         tmp = le32_to_cpu(plcp.data);
1459         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF);
1460         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16);
1461         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur));
1462 }
1463
1464 /* Instead of using custom probe response template, this function
1465  * just patches custom beacon template by:
1466  * 1) Changing packet type
1467  * 2) Patching duration field
1468  * 3) Stripping TIM
1469  */
1470 static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
1471                                           u16 *dest_size,
1472                                           struct ieee80211_rate *rate)
1473 {
1474         const u8 *src_data;
1475         u8 *dest_data;
1476         u16 src_size, elem_size, src_pos, dest_pos;
1477         __le16 dur;
1478         struct ieee80211_hdr *hdr;
1479         size_t ie_start;
1480
1481         src_size = dev->wl->current_beacon->len;
1482         src_data = (const u8 *)dev->wl->current_beacon->data;
1483
1484         /* Get the start offset of the variable IEs in the packet. */
1485         ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
1486         B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable));
1487
1488         if (B43_WARN_ON(src_size < ie_start))
1489                 return NULL;
1490
1491         dest_data = kmalloc(src_size, GFP_ATOMIC);
1492         if (unlikely(!dest_data))
1493                 return NULL;
1494
1495         /* Copy the static data and all Information Elements, except the TIM. */
1496         memcpy(dest_data, src_data, ie_start);
1497         src_pos = ie_start;
1498         dest_pos = ie_start;
1499         for ( ; src_pos < src_size - 2; src_pos += elem_size) {
1500                 elem_size = src_data[src_pos + 1] + 2;
1501                 if (src_data[src_pos] == 5) {
1502                         /* This is the TIM. */
1503                         continue;
1504                 }
1505                 memcpy(dest_data + dest_pos, src_data + src_pos,
1506                        elem_size);
1507                 dest_pos += elem_size;
1508         }
1509         *dest_size = dest_pos;
1510         hdr = (struct ieee80211_hdr *)dest_data;
1511
1512         /* Set the frame control. */
1513         hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1514                                          IEEE80211_STYPE_PROBE_RESP);
1515         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1516                                                dev->wl->vif, *dest_size,
1517                                                rate);
1518         hdr->duration_id = dur;
1519
1520         return dest_data;
1521 }
1522
1523 static void b43_write_probe_resp_template(struct b43_wldev *dev,
1524                                           u16 ram_offset,
1525                                           u16 shm_size_offset,
1526                                           struct ieee80211_rate *rate)
1527 {
1528         const u8 *probe_resp_data;
1529         u16 size;
1530
1531         size = dev->wl->current_beacon->len;
1532         probe_resp_data = b43_generate_probe_resp(dev, &size, rate);
1533         if (unlikely(!probe_resp_data))
1534                 return;
1535
1536         /* Looks like PLCP headers plus packet timings are stored for
1537          * all possible basic rates
1538          */
1539         b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]);
1540         b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]);
1541         b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]);
1542         b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]);
1543
1544         size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6));
1545         b43_write_template_common(dev, probe_resp_data,
1546                                   size, ram_offset, shm_size_offset,
1547                                   rate->hw_value);
1548         kfree(probe_resp_data);
1549 }
1550
1551 static void b43_upload_beacon0(struct b43_wldev *dev)
1552 {
1553         struct b43_wl *wl = dev->wl;
1554
1555         if (wl->beacon0_uploaded)
1556                 return;
1557         b43_write_beacon_template(dev, 0x68, 0x18);
1558         /* FIXME: Probe resp upload doesn't really belong here,
1559          *        but we don't use that feature anyway. */
1560         b43_write_probe_resp_template(dev, 0x268, 0x4A,
1561                                       &__b43_ratetable[3]);
1562         wl->beacon0_uploaded = 1;
1563 }
1564
1565 static void b43_upload_beacon1(struct b43_wldev *dev)
1566 {
1567         struct b43_wl *wl = dev->wl;
1568
1569         if (wl->beacon1_uploaded)
1570                 return;
1571         b43_write_beacon_template(dev, 0x468, 0x1A);
1572         wl->beacon1_uploaded = 1;
1573 }
1574
1575 static void handle_irq_beacon(struct b43_wldev *dev)
1576 {
1577         struct b43_wl *wl = dev->wl;
1578         u32 cmd, beacon0_valid, beacon1_valid;
1579
1580         if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
1581                 return;
1582
1583         /* This is the bottom half of the asynchronous beacon update. */
1584
1585         /* Ignore interrupt in the future. */
1586         dev->irq_savedstate &= ~B43_IRQ_BEACON;
1587
1588         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1589         beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
1590         beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID);
1591
1592         /* Schedule interrupt manually, if busy. */
1593         if (beacon0_valid && beacon1_valid) {
1594                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
1595                 dev->irq_savedstate |= B43_IRQ_BEACON;
1596                 return;
1597         }
1598
1599         if (unlikely(wl->beacon_templates_virgin)) {
1600                 /* We never uploaded a beacon before.
1601                  * Upload both templates now, but only mark one valid. */
1602                 wl->beacon_templates_virgin = 0;
1603                 b43_upload_beacon0(dev);
1604                 b43_upload_beacon1(dev);
1605                 cmd = b43_read32(dev, B43_MMIO_MACCMD);
1606                 cmd |= B43_MACCMD_BEACON0_VALID;
1607                 b43_write32(dev, B43_MMIO_MACCMD, cmd);
1608         } else {
1609                 if (!beacon0_valid) {
1610                         b43_upload_beacon0(dev);
1611                         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1612                         cmd |= B43_MACCMD_BEACON0_VALID;
1613                         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1614                 } else if (!beacon1_valid) {
1615                         b43_upload_beacon1(dev);
1616                         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1617                         cmd |= B43_MACCMD_BEACON1_VALID;
1618                         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1619                 }
1620         }
1621 }
1622
1623 static void b43_beacon_update_trigger_work(struct work_struct *work)
1624 {
1625         struct b43_wl *wl = container_of(work, struct b43_wl,
1626                                          beacon_update_trigger);
1627         struct b43_wldev *dev;
1628
1629         mutex_lock(&wl->mutex);
1630         dev = wl->current_dev;
1631         if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
1632                 spin_lock_irq(&wl->irq_lock);
1633                 /* update beacon right away or defer to irq */
1634                 dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
1635                 handle_irq_beacon(dev);
1636                 /* The handler might have updated the IRQ mask. */
1637                 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK,
1638                             dev->irq_savedstate);
1639                 mmiowb();
1640                 spin_unlock_irq(&wl->irq_lock);
1641         }
1642         mutex_unlock(&wl->mutex);
1643 }
1644
1645 /* Asynchronously update the packet templates in template RAM.
1646  * Locking: Requires wl->irq_lock to be locked. */
1647 static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon,
1648                                  const struct ieee80211_tx_control *txctl)
1649 {
1650         /* This is the top half of the ansynchronous beacon update.
1651          * The bottom half is the beacon IRQ.
1652          * Beacon update must be asynchronous to avoid sending an
1653          * invalid beacon. This can happen for example, if the firmware
1654          * transmits a beacon while we are updating it. */
1655
1656         if (wl->current_beacon)
1657                 dev_kfree_skb_any(wl->current_beacon);
1658         wl->current_beacon = beacon;
1659         memcpy(&wl->beacon_txctl, txctl, sizeof(wl->beacon_txctl));
1660         wl->beacon0_uploaded = 0;
1661         wl->beacon1_uploaded = 0;
1662         queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
1663 }
1664
1665 static void b43_set_ssid(struct b43_wldev *dev, const u8 * ssid, u8 ssid_len)
1666 {
1667         u32 tmp;
1668         u16 i, len;
1669
1670         len = min((u16) ssid_len, (u16) 0x100);
1671         for (i = 0; i < len; i += sizeof(u32)) {
1672                 tmp = (u32) (ssid[i + 0]);
1673                 if (i + 1 < len)
1674                         tmp |= (u32) (ssid[i + 1]) << 8;
1675                 if (i + 2 < len)
1676                         tmp |= (u32) (ssid[i + 2]) << 16;
1677                 if (i + 3 < len)
1678                         tmp |= (u32) (ssid[i + 3]) << 24;
1679                 b43_shm_write32(dev, B43_SHM_SHARED, 0x380 + i, tmp);
1680         }
1681         b43_shm_write16(dev, B43_SHM_SHARED, 0x48, len);
1682 }
1683
1684 static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
1685 {
1686         b43_time_lock(dev);
1687         if (dev->dev->id.revision >= 3) {
1688                 b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
1689                 b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
1690         } else {
1691                 b43_write16(dev, 0x606, (beacon_int >> 6));
1692                 b43_write16(dev, 0x610, beacon_int);
1693         }
1694         b43_time_unlock(dev);
1695         b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
1696 }
1697
1698 static void handle_irq_ucode_debug(struct b43_wldev *dev)
1699 {
1700         //TODO
1701 }
1702
1703 /* Interrupt handler bottom-half */
1704 static void b43_interrupt_tasklet(struct b43_wldev *dev)
1705 {
1706         u32 reason;
1707         u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
1708         u32 merged_dma_reason = 0;
1709         int i;
1710         unsigned long flags;
1711
1712         spin_lock_irqsave(&dev->wl->irq_lock, flags);
1713
1714         B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED);
1715
1716         reason = dev->irq_reason;
1717         for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
1718                 dma_reason[i] = dev->dma_reason[i];
1719                 merged_dma_reason |= dma_reason[i];
1720         }
1721
1722         if (unlikely(reason & B43_IRQ_MAC_TXERR))
1723                 b43err(dev->wl, "MAC transmission error\n");
1724
1725         if (unlikely(reason & B43_IRQ_PHY_TXERR)) {
1726                 b43err(dev->wl, "PHY transmission error\n");
1727                 rmb();
1728                 if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) {
1729                         atomic_set(&dev->phy.txerr_cnt,
1730                                    B43_PHY_TX_BADNESS_LIMIT);
1731                         b43err(dev->wl, "Too many PHY TX errors, "
1732                                         "restarting the controller\n");
1733                         b43_controller_restart(dev, "PHY TX errors");
1734                 }
1735         }
1736
1737         if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK |
1738                                           B43_DMAIRQ_NONFATALMASK))) {
1739                 if (merged_dma_reason & B43_DMAIRQ_FATALMASK) {
1740                         b43err(dev->wl, "Fatal DMA error: "
1741                                "0x%08X, 0x%08X, 0x%08X, "
1742                                "0x%08X, 0x%08X, 0x%08X\n",
1743                                dma_reason[0], dma_reason[1],
1744                                dma_reason[2], dma_reason[3],
1745                                dma_reason[4], dma_reason[5]);
1746                         b43_controller_restart(dev, "DMA error");
1747                         mmiowb();
1748                         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1749                         return;
1750                 }
1751                 if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
1752                         b43err(dev->wl, "DMA error: "
1753                                "0x%08X, 0x%08X, 0x%08X, "
1754                                "0x%08X, 0x%08X, 0x%08X\n",
1755                                dma_reason[0], dma_reason[1],
1756                                dma_reason[2], dma_reason[3],
1757                                dma_reason[4], dma_reason[5]);
1758                 }
1759         }
1760
1761         if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
1762                 handle_irq_ucode_debug(dev);
1763         if (reason & B43_IRQ_TBTT_INDI)
1764                 handle_irq_tbtt_indication(dev);
1765         if (reason & B43_IRQ_ATIM_END)
1766                 handle_irq_atim_end(dev);
1767         if (reason & B43_IRQ_BEACON)
1768                 handle_irq_beacon(dev);
1769         if (reason & B43_IRQ_PMQ)
1770                 handle_irq_pmq(dev);
1771         if (reason & B43_IRQ_TXFIFO_FLUSH_OK)
1772                 ;/* TODO */
1773         if (reason & B43_IRQ_NOISESAMPLE_OK)
1774                 handle_irq_noise(dev);
1775
1776         /* Check the DMA reason registers for received data. */
1777         if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
1778                 if (b43_using_pio_transfers(dev))
1779                         b43_pio_rx(dev->pio.rx_queue);
1780                 else
1781                         b43_dma_rx(dev->dma.rx_ring);
1782         }
1783         B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE);
1784         B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE);
1785         B43_WARN_ON(dma_reason[3] & B43_DMAIRQ_RX_DONE);
1786         B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE);
1787         B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE);
1788
1789         if (reason & B43_IRQ_TX_OK)
1790                 handle_irq_transmit_status(dev);
1791
1792         b43_interrupt_enable(dev, dev->irq_savedstate);
1793         mmiowb();
1794         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1795 }
1796
1797 static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
1798 {
1799         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
1800
1801         b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
1802         b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
1803         b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
1804         b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
1805         b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
1806         b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
1807 }
1808
1809 /* Interrupt handler top-half */
1810 static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
1811 {
1812         irqreturn_t ret = IRQ_NONE;
1813         struct b43_wldev *dev = dev_id;
1814         u32 reason;
1815
1816         if (!dev)
1817                 return IRQ_NONE;
1818
1819         spin_lock(&dev->wl->irq_lock);
1820
1821         if (b43_status(dev) < B43_STAT_STARTED)
1822                 goto out;
1823         reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
1824         if (reason == 0xffffffff)       /* shared IRQ */
1825                 goto out;
1826         ret = IRQ_HANDLED;
1827         reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
1828         if (!reason)
1829                 goto out;
1830
1831         dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
1832             & 0x0001DC00;
1833         dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
1834             & 0x0000DC00;
1835         dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
1836             & 0x0000DC00;
1837         dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON)
1838             & 0x0001DC00;
1839         dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
1840             & 0x0000DC00;
1841         dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
1842             & 0x0000DC00;
1843
1844         b43_interrupt_ack(dev, reason);
1845         /* disable all IRQs. They are enabled again in the bottom half. */
1846         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
1847         /* save the reason code and call our bottom half. */
1848         dev->irq_reason = reason;
1849         tasklet_schedule(&dev->isr_tasklet);
1850       out:
1851         mmiowb();
1852         spin_unlock(&dev->wl->irq_lock);
1853
1854         return ret;
1855 }
1856
1857 static void do_release_fw(struct b43_firmware_file *fw)
1858 {
1859         release_firmware(fw->data);
1860         fw->data = NULL;
1861         fw->filename = NULL;
1862 }
1863
1864 static void b43_release_firmware(struct b43_wldev *dev)
1865 {
1866         do_release_fw(&dev->fw.ucode);
1867         do_release_fw(&dev->fw.pcm);
1868         do_release_fw(&dev->fw.initvals);
1869         do_release_fw(&dev->fw.initvals_band);
1870 }
1871
1872 static void b43_print_fw_helptext(struct b43_wl *wl, bool error)
1873 {
1874         const char *text;
1875
1876         text = "You must go to "
1877                "http://linuxwireless.org/en/users/Drivers/b43#devicefirmware "
1878                "and download the latest firmware (version 4).\n";
1879         if (error)
1880                 b43err(wl, text);
1881         else
1882                 b43warn(wl, text);
1883 }
1884
1885 static int do_request_fw(struct b43_wldev *dev,
1886                          const char *name,
1887                          struct b43_firmware_file *fw)
1888 {
1889         char path[sizeof(modparam_fwpostfix) + 32];
1890         const struct firmware *blob;
1891         struct b43_fw_header *hdr;
1892         u32 size;
1893         int err;
1894
1895         if (!name) {
1896                 /* Don't fetch anything. Free possibly cached firmware. */
1897                 do_release_fw(fw);
1898                 return 0;
1899         }
1900         if (fw->filename) {
1901                 if (strcmp(fw->filename, name) == 0)
1902                         return 0; /* Already have this fw. */
1903                 /* Free the cached firmware first. */
1904                 do_release_fw(fw);
1905         }
1906
1907         snprintf(path, ARRAY_SIZE(path),
1908                  "b43%s/%s.fw",
1909                  modparam_fwpostfix, name);
1910         err = request_firmware(&blob, path, dev->dev->dev);
1911         if (err) {
1912                 b43err(dev->wl, "Firmware file \"%s\" not found "
1913                        "or load failed.\n", path);
1914                 return err;
1915         }
1916         if (blob->size < sizeof(struct b43_fw_header))
1917                 goto err_format;
1918         hdr = (struct b43_fw_header *)(blob->data);
1919         switch (hdr->type) {
1920         case B43_FW_TYPE_UCODE:
1921         case B43_FW_TYPE_PCM:
1922                 size = be32_to_cpu(hdr->size);
1923                 if (size != blob->size - sizeof(struct b43_fw_header))
1924                         goto err_format;
1925                 /* fallthrough */
1926         case B43_FW_TYPE_IV:
1927                 if (hdr->ver != 1)
1928                         goto err_format;
1929                 break;
1930         default:
1931                 goto err_format;
1932         }
1933
1934         fw->data = blob;
1935         fw->filename = name;
1936
1937         return 0;
1938
1939 err_format:
1940         b43err(dev->wl, "Firmware file \"%s\" format error.\n", path);
1941         release_firmware(blob);
1942
1943         return -EPROTO;
1944 }
1945
1946 static int b43_request_firmware(struct b43_wldev *dev)
1947 {
1948         struct b43_firmware *fw = &dev->fw;
1949         const u8 rev = dev->dev->id.revision;
1950         const char *filename;
1951         u32 tmshigh;
1952         int err;
1953
1954         /* Get microcode */
1955         tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
1956         if ((rev >= 5) && (rev <= 10))
1957                 filename = "ucode5";
1958         else if ((rev >= 11) && (rev <= 12))
1959                 filename = "ucode11";
1960         else if (rev >= 13)
1961                 filename = "ucode13";
1962         else
1963                 goto err_no_ucode;
1964         err = do_request_fw(dev, filename, &fw->ucode);
1965         if (err)
1966                 goto err_load;
1967
1968         /* Get PCM code */
1969         if ((rev >= 5) && (rev <= 10))
1970                 filename = "pcm5";
1971         else if (rev >= 11)
1972                 filename = NULL;
1973         else
1974                 goto err_no_pcm;
1975         err = do_request_fw(dev, filename, &fw->pcm);
1976         if (err)
1977                 goto err_load;
1978
1979         /* Get initvals */
1980         switch (dev->phy.type) {
1981         case B43_PHYTYPE_A:
1982                 if ((rev >= 5) && (rev <= 10)) {
1983                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
1984                                 filename = "a0g1initvals5";
1985                         else
1986                                 filename = "a0g0initvals5";
1987                 } else
1988                         goto err_no_initvals;
1989                 break;
1990         case B43_PHYTYPE_G:
1991                 if ((rev >= 5) && (rev <= 10))
1992                         filename = "b0g0initvals5";
1993                 else if (rev >= 13)
1994                         filename = "lp0initvals13";
1995                 else
1996                         goto err_no_initvals;
1997                 break;
1998         case B43_PHYTYPE_N:
1999                 if ((rev >= 11) && (rev <= 12))
2000                         filename = "n0initvals11";
2001                 else
2002                         goto err_no_initvals;
2003                 break;
2004         default:
2005                 goto err_no_initvals;
2006         }
2007         err = do_request_fw(dev, filename, &fw->initvals);
2008         if (err)
2009                 goto err_load;
2010
2011         /* Get bandswitch initvals */
2012         switch (dev->phy.type) {
2013         case B43_PHYTYPE_A:
2014                 if ((rev >= 5) && (rev <= 10)) {
2015                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
2016                                 filename = "a0g1bsinitvals5";
2017                         else
2018                                 filename = "a0g0bsinitvals5";
2019                 } else if (rev >= 11)
2020                         filename = NULL;
2021                 else
2022                         goto err_no_initvals;
2023                 break;
2024         case B43_PHYTYPE_G:
2025                 if ((rev >= 5) && (rev <= 10))
2026                         filename = "b0g0bsinitvals5";
2027                 else if (rev >= 11)
2028                         filename = NULL;
2029                 else
2030                         goto err_no_initvals;
2031                 break;
2032         case B43_PHYTYPE_N:
2033                 if ((rev >= 11) && (rev <= 12))
2034                         filename = "n0bsinitvals11";
2035                 else
2036                         goto err_no_initvals;
2037                 break;
2038         default:
2039                 goto err_no_initvals;
2040         }
2041         err = do_request_fw(dev, filename, &fw->initvals_band);
2042         if (err)
2043                 goto err_load;
2044
2045         return 0;
2046
2047 err_load:
2048         b43_print_fw_helptext(dev->wl, 1);
2049         goto error;
2050
2051 err_no_ucode:
2052         err = -ENODEV;
2053         b43err(dev->wl, "No microcode available for core rev %u\n", rev);
2054         goto error;
2055
2056 err_no_pcm:
2057         err = -ENODEV;
2058         b43err(dev->wl, "No PCM available for core rev %u\n", rev);
2059         goto error;
2060
2061 err_no_initvals:
2062         err = -ENODEV;
2063         b43err(dev->wl, "No Initial Values firmware file for PHY %u, "
2064                "core rev %u\n", dev->phy.type, rev);
2065         goto error;
2066
2067 error:
2068         b43_release_firmware(dev);
2069         return err;
2070 }
2071
2072 static int b43_upload_microcode(struct b43_wldev *dev)
2073 {
2074         const size_t hdr_len = sizeof(struct b43_fw_header);
2075         const __be32 *data;
2076         unsigned int i, len;
2077         u16 fwrev, fwpatch, fwdate, fwtime;
2078         u32 tmp, macctl;
2079         int err = 0;
2080
2081         /* Jump the microcode PSM to offset 0 */
2082         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2083         B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN);
2084         macctl |= B43_MACCTL_PSM_JMP0;
2085         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2086         /* Zero out all microcode PSM registers and shared memory. */
2087         for (i = 0; i < 64; i++)
2088                 b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0);
2089         for (i = 0; i < 4096; i += 2)
2090                 b43_shm_write16(dev, B43_SHM_SHARED, i, 0);
2091
2092         /* Upload Microcode. */
2093         data = (__be32 *) (dev->fw.ucode.data->data + hdr_len);
2094         len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32);
2095         b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000);
2096         for (i = 0; i < len; i++) {
2097                 b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2098                 udelay(10);
2099         }
2100
2101         if (dev->fw.pcm.data) {
2102                 /* Upload PCM data. */
2103                 data = (__be32 *) (dev->fw.pcm.data->data + hdr_len);
2104                 len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32);
2105                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EA);
2106                 b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000);
2107                 /* No need for autoinc bit in SHM_HW */
2108                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EB);
2109                 for (i = 0; i < len; i++) {
2110                         b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2111                         udelay(10);
2112                 }
2113         }
2114
2115         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL);
2116
2117         /* Start the microcode PSM */
2118         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2119         macctl &= ~B43_MACCTL_PSM_JMP0;
2120         macctl |= B43_MACCTL_PSM_RUN;
2121         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2122
2123         /* Wait for the microcode to load and respond */
2124         i = 0;
2125         while (1) {
2126                 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2127                 if (tmp == B43_IRQ_MAC_SUSPENDED)
2128                         break;
2129                 i++;
2130                 if (i >= 20) {
2131                         b43err(dev->wl, "Microcode not responding\n");
2132                         b43_print_fw_helptext(dev->wl, 1);
2133                         err = -ENODEV;
2134                         goto error;
2135                 }
2136                 msleep_interruptible(50);
2137                 if (signal_pending(current)) {
2138                         err = -EINTR;
2139                         goto error;
2140                 }
2141         }
2142         b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);       /* dummy read */
2143
2144         /* Get and check the revisions. */
2145         fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV);
2146         fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH);
2147         fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE);
2148         fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME);
2149
2150         if (fwrev <= 0x128) {
2151                 b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from "
2152                        "binary drivers older than version 4.x is unsupported. "
2153                        "You must upgrade your firmware files.\n");
2154                 b43_print_fw_helptext(dev->wl, 1);
2155                 err = -EOPNOTSUPP;
2156                 goto error;
2157         }
2158         b43info(dev->wl, "Loading firmware version %u.%u "
2159                 "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
2160                 fwrev, fwpatch,
2161                 (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
2162                 (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
2163
2164         dev->fw.rev = fwrev;
2165         dev->fw.patch = fwpatch;
2166
2167         if (b43_is_old_txhdr_format(dev)) {
2168                 b43warn(dev->wl, "You are using an old firmware image. "
2169                         "Support for old firmware will be removed in July 2008.\n");
2170                 b43_print_fw_helptext(dev->wl, 0);
2171         }
2172
2173         return 0;
2174
2175 error:
2176         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2177         macctl &= ~B43_MACCTL_PSM_RUN;
2178         macctl |= B43_MACCTL_PSM_JMP0;
2179         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2180
2181         return err;
2182 }
2183
2184 static int b43_write_initvals(struct b43_wldev *dev,
2185                               const struct b43_iv *ivals,
2186                               size_t count,
2187                               size_t array_size)
2188 {
2189         const struct b43_iv *iv;
2190         u16 offset;
2191         size_t i;
2192         bool bit32;
2193
2194         BUILD_BUG_ON(sizeof(struct b43_iv) != 6);
2195         iv = ivals;
2196         for (i = 0; i < count; i++) {
2197                 if (array_size < sizeof(iv->offset_size))
2198                         goto err_format;
2199                 array_size -= sizeof(iv->offset_size);
2200                 offset = be16_to_cpu(iv->offset_size);
2201                 bit32 = !!(offset & B43_IV_32BIT);
2202                 offset &= B43_IV_OFFSET_MASK;
2203                 if (offset >= 0x1000)
2204                         goto err_format;
2205                 if (bit32) {
2206                         u32 value;
2207
2208                         if (array_size < sizeof(iv->data.d32))
2209                                 goto err_format;
2210                         array_size -= sizeof(iv->data.d32);
2211
2212                         value = get_unaligned_be32(&iv->data.d32);
2213                         b43_write32(dev, offset, value);
2214
2215                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2216                                                         sizeof(__be16) +
2217                                                         sizeof(__be32));
2218                 } else {
2219                         u16 value;
2220
2221                         if (array_size < sizeof(iv->data.d16))
2222                                 goto err_format;
2223                         array_size -= sizeof(iv->data.d16);
2224
2225                         value = be16_to_cpu(iv->data.d16);
2226                         b43_write16(dev, offset, value);
2227
2228                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2229                                                         sizeof(__be16) +
2230                                                         sizeof(__be16));
2231                 }
2232         }
2233         if (array_size)
2234                 goto err_format;
2235
2236         return 0;
2237
2238 err_format:
2239         b43err(dev->wl, "Initial Values Firmware file-format error.\n");
2240         b43_print_fw_helptext(dev->wl, 1);
2241
2242         return -EPROTO;
2243 }
2244
2245 static int b43_upload_initvals(struct b43_wldev *dev)
2246 {
2247         const size_t hdr_len = sizeof(struct b43_fw_header);
2248         const struct b43_fw_header *hdr;
2249         struct b43_firmware *fw = &dev->fw;
2250         const struct b43_iv *ivals;
2251         size_t count;
2252         int err;
2253
2254         hdr = (const struct b43_fw_header *)(fw->initvals.data->data);
2255         ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len);
2256         count = be32_to_cpu(hdr->size);
2257         err = b43_write_initvals(dev, ivals, count,
2258                                  fw->initvals.data->size - hdr_len);
2259         if (err)
2260                 goto out;
2261         if (fw->initvals_band.data) {
2262                 hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
2263                 ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
2264                 count = be32_to_cpu(hdr->size);
2265                 err = b43_write_initvals(dev, ivals, count,
2266                                          fw->initvals_band.data->size - hdr_len);
2267                 if (err)
2268                         goto out;
2269         }
2270 out:
2271
2272         return err;
2273 }
2274
2275 /* Initialize the GPIOs
2276  * http://bcm-specs.sipsolutions.net/GPIO
2277  */
2278 static int b43_gpio_init(struct b43_wldev *dev)
2279 {
2280         struct ssb_bus *bus = dev->dev->bus;
2281         struct ssb_device *gpiodev, *pcidev = NULL;
2282         u32 mask, set;
2283
2284         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2285                     & ~B43_MACCTL_GPOUTSMSK);
2286
2287         b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK)
2288                     | 0x000F);
2289
2290         mask = 0x0000001F;
2291         set = 0x0000000F;
2292         if (dev->dev->bus->chip_id == 0x4301) {
2293                 mask |= 0x0060;
2294                 set |= 0x0060;
2295         }
2296         if (0 /* FIXME: conditional unknown */ ) {
2297                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2298                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2299                             | 0x0100);
2300                 mask |= 0x0180;
2301                 set |= 0x0180;
2302         }
2303         if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
2304                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2305                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2306                             | 0x0200);
2307                 mask |= 0x0200;
2308                 set |= 0x0200;
2309         }
2310         if (dev->dev->id.revision >= 2)
2311                 mask |= 0x0010; /* FIXME: This is redundant. */
2312
2313 #ifdef CONFIG_SSB_DRIVER_PCICORE
2314         pcidev = bus->pcicore.dev;
2315 #endif
2316         gpiodev = bus->chipco.dev ? : pcidev;
2317         if (!gpiodev)
2318                 return 0;
2319         ssb_write32(gpiodev, B43_GPIO_CONTROL,
2320                     (ssb_read32(gpiodev, B43_GPIO_CONTROL)
2321                      & mask) | set);
2322
2323         return 0;
2324 }
2325
2326 /* Turn off all GPIO stuff. Call this on module unload, for example. */
2327 static void b43_gpio_cleanup(struct b43_wldev *dev)
2328 {
2329         struct ssb_bus *bus = dev->dev->bus;
2330         struct ssb_device *gpiodev, *pcidev = NULL;
2331
2332 #ifdef CONFIG_SSB_DRIVER_PCICORE
2333         pcidev = bus->pcicore.dev;
2334 #endif
2335         gpiodev = bus->chipco.dev ? : pcidev;
2336         if (!gpiodev)
2337                 return;
2338         ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
2339 }
2340
2341 /* http://bcm-specs.sipsolutions.net/EnableMac */
2342 static void b43_mac_enable(struct b43_wldev *dev)
2343 {
2344         dev->mac_suspended--;
2345         B43_WARN_ON(dev->mac_suspended < 0);
2346         if (dev->mac_suspended == 0) {
2347                 b43_write32(dev, B43_MMIO_MACCTL,
2348                             b43_read32(dev, B43_MMIO_MACCTL)
2349                             | B43_MACCTL_ENABLED);
2350                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON,
2351                             B43_IRQ_MAC_SUSPENDED);
2352                 /* Commit writes */
2353                 b43_read32(dev, B43_MMIO_MACCTL);
2354                 b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2355                 b43_power_saving_ctl_bits(dev, 0);
2356
2357                 /* Re-enable IRQs. */
2358                 spin_lock_irq(&dev->wl->irq_lock);
2359                 b43_interrupt_enable(dev, dev->irq_savedstate);
2360                 spin_unlock_irq(&dev->wl->irq_lock);
2361         }
2362 }
2363
2364 /* http://bcm-specs.sipsolutions.net/SuspendMAC */
2365 static void b43_mac_suspend(struct b43_wldev *dev)
2366 {
2367         int i;
2368         u32 tmp;
2369
2370         might_sleep();
2371         B43_WARN_ON(dev->mac_suspended < 0);
2372
2373         if (dev->mac_suspended == 0) {
2374                 /* Mask IRQs before suspending MAC. Otherwise
2375                  * the MAC stays busy and won't suspend. */
2376                 spin_lock_irq(&dev->wl->irq_lock);
2377                 tmp = b43_interrupt_disable(dev, B43_IRQ_ALL);
2378                 spin_unlock_irq(&dev->wl->irq_lock);
2379                 b43_synchronize_irq(dev);
2380                 dev->irq_savedstate = tmp;
2381
2382                 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
2383                 b43_write32(dev, B43_MMIO_MACCTL,
2384                             b43_read32(dev, B43_MMIO_MACCTL)
2385                             & ~B43_MACCTL_ENABLED);
2386                 /* force pci to flush the write */
2387                 b43_read32(dev, B43_MMIO_MACCTL);
2388                 for (i = 35; i; i--) {
2389                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2390                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2391                                 goto out;
2392                         udelay(10);
2393                 }
2394                 /* Hm, it seems this will take some time. Use msleep(). */
2395                 for (i = 40; i; i--) {
2396                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2397                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2398                                 goto out;
2399                         msleep(1);
2400                 }
2401                 b43err(dev->wl, "MAC suspend failed\n");
2402         }
2403 out:
2404         dev->mac_suspended++;
2405 }
2406
2407 static void b43_adjust_opmode(struct b43_wldev *dev)
2408 {
2409         struct b43_wl *wl = dev->wl;
2410         u32 ctl;
2411         u16 cfp_pretbtt;
2412
2413         ctl = b43_read32(dev, B43_MMIO_MACCTL);
2414         /* Reset status to STA infrastructure mode. */
2415         ctl &= ~B43_MACCTL_AP;
2416         ctl &= ~B43_MACCTL_KEEP_CTL;
2417         ctl &= ~B43_MACCTL_KEEP_BADPLCP;
2418         ctl &= ~B43_MACCTL_KEEP_BAD;
2419         ctl &= ~B43_MACCTL_PROMISC;
2420         ctl &= ~B43_MACCTL_BEACPROMISC;
2421         ctl |= B43_MACCTL_INFRA;
2422
2423         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
2424                 ctl |= B43_MACCTL_AP;
2425         else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
2426                 ctl &= ~B43_MACCTL_INFRA;
2427
2428         if (wl->filter_flags & FIF_CONTROL)
2429                 ctl |= B43_MACCTL_KEEP_CTL;
2430         if (wl->filter_flags & FIF_FCSFAIL)
2431                 ctl |= B43_MACCTL_KEEP_BAD;
2432         if (wl->filter_flags & FIF_PLCPFAIL)
2433                 ctl |= B43_MACCTL_KEEP_BADPLCP;
2434         if (wl->filter_flags & FIF_PROMISC_IN_BSS)
2435                 ctl |= B43_MACCTL_PROMISC;
2436         if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
2437                 ctl |= B43_MACCTL_BEACPROMISC;
2438
2439         /* Workaround: On old hardware the HW-MAC-address-filter
2440          * doesn't work properly, so always run promisc in filter
2441          * it in software. */
2442         if (dev->dev->id.revision <= 4)
2443                 ctl |= B43_MACCTL_PROMISC;
2444
2445         b43_write32(dev, B43_MMIO_MACCTL, ctl);
2446
2447         cfp_pretbtt = 2;
2448         if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
2449                 if (dev->dev->bus->chip_id == 0x4306 &&
2450                     dev->dev->bus->chip_rev == 3)
2451                         cfp_pretbtt = 100;
2452                 else
2453                         cfp_pretbtt = 50;
2454         }
2455         b43_write16(dev, 0x612, cfp_pretbtt);
2456 }
2457
2458 static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
2459 {
2460         u16 offset;
2461
2462         if (is_ofdm) {
2463                 offset = 0x480;
2464                 offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
2465         } else {
2466                 offset = 0x4C0;
2467                 offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
2468         }
2469         b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20,
2470                         b43_shm_read16(dev, B43_SHM_SHARED, offset));
2471 }
2472
2473 static void b43_rate_memory_init(struct b43_wldev *dev)
2474 {
2475         switch (dev->phy.type) {
2476         case B43_PHYTYPE_A:
2477         case B43_PHYTYPE_G:
2478         case B43_PHYTYPE_N:
2479                 b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
2480                 b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
2481                 b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);
2482                 b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1);
2483                 b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1);
2484                 b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1);
2485                 b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1);
2486                 if (dev->phy.type == B43_PHYTYPE_A)
2487                         break;
2488                 /* fallthrough */
2489         case B43_PHYTYPE_B:
2490                 b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0);
2491                 b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0);
2492                 b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0);
2493                 b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0);
2494                 break;
2495         default:
2496                 B43_WARN_ON(1);
2497         }
2498 }
2499
2500 /* Set the default values for the PHY TX Control Words. */
2501 static void b43_set_phytxctl_defaults(struct b43_wldev *dev)
2502 {
2503         u16 ctl = 0;
2504
2505         ctl |= B43_TXH_PHY_ENC_CCK;
2506         ctl |= B43_TXH_PHY_ANT01AUTO;
2507         ctl |= B43_TXH_PHY_TXPWR;
2508
2509         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
2510         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl);
2511         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl);
2512 }
2513
2514 /* Set the TX-Antenna for management frames sent by firmware. */
2515 static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
2516 {
2517         u16 ant;
2518         u16 tmp;
2519
2520         ant = b43_antenna_to_phyctl(antenna);
2521
2522         /* For ACK/CTS */
2523         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL);
2524         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2525         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp);
2526         /* For Probe Resposes */
2527         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL);
2528         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2529         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
2530 }
2531
2532 /* This is the opposite of b43_chip_init() */
2533 static void b43_chip_exit(struct b43_wldev *dev)
2534 {
2535         b43_radio_turn_off(dev, 1);
2536         b43_gpio_cleanup(dev);
2537         /* firmware is released later */
2538 }
2539
2540 /* Initialize the chip
2541  * http://bcm-specs.sipsolutions.net/ChipInit
2542  */
2543 static int b43_chip_init(struct b43_wldev *dev)
2544 {
2545         struct b43_phy *phy = &dev->phy;
2546         int err, tmp;
2547         u32 value32, macctl;
2548         u16 value16;
2549
2550         /* Initialize the MAC control */
2551         macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED;
2552         if (dev->phy.gmode)
2553                 macctl |= B43_MACCTL_GMODE;
2554         macctl |= B43_MACCTL_INFRA;
2555         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2556
2557         err = b43_request_firmware(dev);
2558         if (err)
2559                 goto out;
2560         err = b43_upload_microcode(dev);
2561         if (err)
2562                 goto out;       /* firmware is released later */
2563
2564         err = b43_gpio_init(dev);
2565         if (err)
2566                 goto out;       /* firmware is released later */
2567
2568         err = b43_upload_initvals(dev);
2569         if (err)
2570                 goto err_gpio_clean;
2571         b43_radio_turn_on(dev);
2572
2573         b43_write16(dev, 0x03E6, 0x0000);
2574         err = b43_phy_init(dev);
2575         if (err)
2576                 goto err_radio_off;
2577
2578         /* Select initial Interference Mitigation. */
2579         tmp = phy->interfmode;
2580         phy->interfmode = B43_INTERFMODE_NONE;
2581         b43_radio_set_interference_mitigation(dev, tmp);
2582
2583         b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
2584         b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
2585
2586         if (phy->type == B43_PHYTYPE_B) {
2587                 value16 = b43_read16(dev, 0x005E);
2588                 value16 |= 0x0004;
2589                 b43_write16(dev, 0x005E, value16);
2590         }
2591         b43_write32(dev, 0x0100, 0x01000000);
2592         if (dev->dev->id.revision < 5)
2593                 b43_write32(dev, 0x010C, 0x01000000);
2594
2595         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2596                     & ~B43_MACCTL_INFRA);
2597         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2598                     | B43_MACCTL_INFRA);
2599
2600         /* Probe Response Timeout value */
2601         /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
2602         b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000);
2603
2604         /* Initially set the wireless operation mode. */
2605         b43_adjust_opmode(dev);
2606
2607         if (dev->dev->id.revision < 3) {
2608                 b43_write16(dev, 0x060E, 0x0000);
2609                 b43_write16(dev, 0x0610, 0x8000);
2610                 b43_write16(dev, 0x0604, 0x0000);
2611                 b43_write16(dev, 0x0606, 0x0200);
2612         } else {
2613                 b43_write32(dev, 0x0188, 0x80000000);
2614                 b43_write32(dev, 0x018C, 0x02000000);
2615         }
2616         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
2617         b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
2618         b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
2619         b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
2620         b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
2621         b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
2622         b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
2623
2624         value32 = ssb_read32(dev->dev, SSB_TMSLOW);
2625         value32 |= 0x00100000;
2626         ssb_write32(dev->dev, SSB_TMSLOW, value32);
2627
2628         b43_write16(dev, B43_MMIO_POWERUP_DELAY,
2629                     dev->dev->bus->chipco.fast_pwrup_delay);
2630
2631         err = 0;
2632         b43dbg(dev->wl, "Chip initialized\n");
2633 out:
2634         return err;
2635
2636 err_radio_off:
2637         b43_radio_turn_off(dev, 1);
2638 err_gpio_clean:
2639         b43_gpio_cleanup(dev);
2640         return err;
2641 }
2642
2643 static void b43_periodic_every120sec(struct b43_wldev *dev)
2644 {
2645         struct b43_phy *phy = &dev->phy;
2646
2647         if (phy->type != B43_PHYTYPE_G || phy->rev < 2)
2648                 return;
2649
2650         b43_mac_suspend(dev);
2651         b43_lo_g_measure(dev);
2652         b43_mac_enable(dev);
2653         if (b43_has_hardware_pctl(phy))
2654                 b43_lo_g_ctl_mark_all_unused(dev);
2655 }
2656
2657 static void b43_periodic_every60sec(struct b43_wldev *dev)
2658 {
2659         struct b43_phy *phy = &dev->phy;
2660
2661         if (phy->type != B43_PHYTYPE_G)
2662                 return;
2663         if (!b43_has_hardware_pctl(phy))
2664                 b43_lo_g_ctl_mark_all_unused(dev);
2665         if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
2666                 b43_mac_suspend(dev);
2667                 b43_calc_nrssi_slope(dev);
2668                 if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
2669                         u8 old_chan = phy->channel;
2670
2671                         /* VCO Calibration */
2672                         if (old_chan >= 8)
2673                                 b43_radio_selectchannel(dev, 1, 0);
2674                         else
2675                                 b43_radio_selectchannel(dev, 13, 0);
2676                         b43_radio_selectchannel(dev, old_chan, 0);
2677                 }
2678                 b43_mac_enable(dev);
2679         }
2680 }
2681
2682 static void b43_periodic_every30sec(struct b43_wldev *dev)
2683 {
2684         /* Update device statistics. */
2685         b43_calculate_link_quality(dev);
2686 }
2687
2688 static void b43_periodic_every15sec(struct b43_wldev *dev)
2689 {
2690         struct b43_phy *phy = &dev->phy;
2691
2692         if (phy->type == B43_PHYTYPE_G) {
2693                 //TODO: update_aci_moving_average
2694                 if (phy->aci_enable && phy->aci_wlan_automatic) {
2695                         b43_mac_suspend(dev);
2696                         if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) {
2697                                 if (0 /*TODO: bunch of conditions */ ) {
2698                                         b43_radio_set_interference_mitigation
2699                                             (dev, B43_INTERFMODE_MANUALWLAN);
2700                                 }
2701                         } else if (1 /*TODO*/) {
2702                                 /*
2703                                    if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) {
2704                                    b43_radio_set_interference_mitigation(dev,
2705                                    B43_INTERFMODE_NONE);
2706                                    }
2707                                  */
2708                         }
2709                         b43_mac_enable(dev);
2710                 } else if (phy->interfmode == B43_INTERFMODE_NONWLAN &&
2711                            phy->rev == 1) {
2712                         //TODO: implement rev1 workaround
2713                 }
2714         }
2715         b43_phy_xmitpower(dev); //FIXME: unless scanning?
2716         //TODO for APHY (temperature?)
2717
2718         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
2719         wmb();
2720 }
2721
2722 static void do_periodic_work(struct b43_wldev *dev)
2723 {
2724         unsigned int state;
2725
2726         state = dev->periodic_state;
2727         if (state % 8 == 0)
2728                 b43_periodic_every120sec(dev);
2729         if (state % 4 == 0)
2730                 b43_periodic_every60sec(dev);
2731         if (state % 2 == 0)
2732                 b43_periodic_every30sec(dev);
2733         b43_periodic_every15sec(dev);
2734 }
2735
2736 /* Periodic work locking policy:
2737  *      The whole periodic work handler is protected by
2738  *      wl->mutex. If another lock is needed somewhere in the
2739  *      pwork callchain, it's aquired in-place, where it's needed.
2740  */
2741 static void b43_periodic_work_handler(struct work_struct *work)
2742 {
2743         struct b43_wldev *dev = container_of(work, struct b43_wldev,
2744                                              periodic_work.work);
2745         struct b43_wl *wl = dev->wl;
2746         unsigned long delay;
2747
2748         mutex_lock(&wl->mutex);
2749
2750         if (unlikely(b43_status(dev) != B43_STAT_STARTED))
2751                 goto out;
2752         if (b43_debug(dev, B43_DBG_PWORK_STOP))
2753                 goto out_requeue;
2754
2755         do_periodic_work(dev);
2756
2757         dev->periodic_state++;
2758 out_requeue:
2759         if (b43_debug(dev, B43_DBG_PWORK_FAST))
2760                 delay = msecs_to_jiffies(50);
2761         else
2762                 delay = round_jiffies_relative(HZ * 15);
2763         queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay);
2764 out:
2765         mutex_unlock(&wl->mutex);
2766 }
2767
2768 static void b43_periodic_tasks_setup(struct b43_wldev *dev)
2769 {
2770         struct delayed_work *work = &dev->periodic_work;
2771
2772         dev->periodic_state = 0;
2773         INIT_DELAYED_WORK(work, b43_periodic_work_handler);
2774         queue_delayed_work(dev->wl->hw->workqueue, work, 0);
2775 }
2776
2777 /* Check if communication with the device works correctly. */
2778 static int b43_validate_chipaccess(struct b43_wldev *dev)
2779 {
2780         u32 v, backup;
2781
2782         backup = b43_shm_read32(dev, B43_SHM_SHARED, 0);
2783
2784         /* Check for read/write and endianness problems. */
2785         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55);
2786         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55)
2787                 goto error;
2788         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA);
2789         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA)
2790                 goto error;
2791
2792         b43_shm_write32(dev, B43_SHM_SHARED, 0, backup);
2793
2794         if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) {
2795                 /* The 32bit register shadows the two 16bit registers
2796                  * with update sideeffects. Validate this. */
2797                 b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
2798                 b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB);
2799                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB)
2800                         goto error;
2801                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC)
2802                         goto error;
2803         }
2804         b43_write32(dev, B43_MMIO_TSF_CFP_START, 0);
2805
2806         v = b43_read32(dev, B43_MMIO_MACCTL);
2807         v |= B43_MACCTL_GMODE;
2808         if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED))
2809                 goto error;
2810
2811         return 0;
2812 error:
2813         b43err(dev->wl, "Failed to validate the chipaccess\n");
2814         return -ENODEV;
2815 }
2816
2817 static void b43_security_init(struct b43_wldev *dev)
2818 {
2819         dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20;
2820         B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key));
2821         dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP);
2822         /* KTP is a word address, but we address SHM bytewise.
2823          * So multiply by two.
2824          */
2825         dev->ktp *= 2;
2826         if (dev->dev->id.revision >= 5) {
2827                 /* Number of RCMTA address slots */
2828                 b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8);
2829         }
2830         b43_clear_keys(dev);
2831 }
2832
2833 static int b43_rng_read(struct hwrng *rng, u32 * data)
2834 {
2835         struct b43_wl *wl = (struct b43_wl *)rng->priv;
2836         unsigned long flags;
2837
2838         /* Don't take wl->mutex here, as it could deadlock with
2839          * hwrng internal locking. It's not needed to take
2840          * wl->mutex here, anyway. */
2841
2842         spin_lock_irqsave(&wl->irq_lock, flags);
2843         *data = b43_read16(wl->current_dev, B43_MMIO_RNG);
2844         spin_unlock_irqrestore(&wl->irq_lock, flags);
2845
2846         return (sizeof(u16));
2847 }
2848
2849 static void b43_rng_exit(struct b43_wl *wl)
2850 {
2851         if (wl->rng_initialized)
2852                 hwrng_unregister(&wl->rng);
2853 }
2854
2855 static int b43_rng_init(struct b43_wl *wl)
2856 {
2857         int err;
2858
2859         snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
2860                  "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
2861         wl->rng.name = wl->rng_name;
2862         wl->rng.data_read = b43_rng_read;
2863         wl->rng.priv = (unsigned long)wl;
2864         wl->rng_initialized = 1;
2865         err = hwrng_register(&wl->rng);
2866         if (err) {
2867                 wl->rng_initialized = 0;
2868                 b43err(wl, "Failed to register the random "
2869                        "number generator (%d)\n", err);
2870         }
2871
2872         return err;
2873 }
2874
2875 static int b43_op_tx(struct ieee80211_hw *hw,
2876                      struct sk_buff *skb,
2877                      struct ieee80211_tx_control *ctl)
2878 {
2879         struct b43_wl *wl = hw_to_b43_wl(hw);
2880         struct b43_wldev *dev = wl->current_dev;
2881         unsigned long flags;
2882         int err;
2883
2884         if (unlikely(skb->len < 2 + 2 + 6)) {
2885                 /* Too short, this can't be a valid frame. */
2886                 dev_kfree_skb_any(skb);
2887                 return NETDEV_TX_OK;
2888         }
2889         B43_WARN_ON(skb_shinfo(skb)->nr_frags);
2890         if (unlikely(!dev))
2891                 return NETDEV_TX_BUSY;
2892
2893         /* Transmissions on seperate queues can run concurrently. */
2894         read_lock_irqsave(&wl->tx_lock, flags);
2895
2896         err = -ENODEV;
2897         if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
2898                 if (b43_using_pio_transfers(dev))
2899                         err = b43_pio_tx(dev, skb, ctl);
2900                 else
2901                         err = b43_dma_tx(dev, skb, ctl);
2902         }
2903
2904         read_unlock_irqrestore(&wl->tx_lock, flags);
2905
2906         if (unlikely(err))
2907                 return NETDEV_TX_BUSY;
2908         return NETDEV_TX_OK;
2909 }
2910
2911 /* Locking: wl->irq_lock */
2912 static void b43_qos_params_upload(struct b43_wldev *dev,
2913                                   const struct ieee80211_tx_queue_params *p,
2914                                   u16 shm_offset)
2915 {
2916         u16 params[B43_NR_QOSPARAMS];
2917         int cw_min, cw_max, aifs, bslots, tmp;
2918         unsigned int i;
2919
2920         const u16 aCWmin = 0x0001;
2921         const u16 aCWmax = 0x03FF;
2922
2923         /* Calculate the default values for the parameters, if needed. */
2924         switch (shm_offset) {
2925         case B43_QOS_VOICE:
2926                 aifs = (p->aifs == -1) ? 2 : p->aifs;
2927                 cw_min = (p->cw_min == 0) ? ((aCWmin + 1) / 4 - 1) : p->cw_min;
2928                 cw_max = (p->cw_max == 0) ? ((aCWmin + 1) / 2 - 1) : p->cw_max;
2929                 break;
2930         case B43_QOS_VIDEO:
2931                 aifs = (p->aifs == -1) ? 2 : p->aifs;
2932                 cw_min = (p->cw_min == 0) ? ((aCWmin + 1) / 2 - 1) : p->cw_min;
2933                 cw_max = (p->cw_max == 0) ? aCWmin : p->cw_max;
2934                 break;
2935         case B43_QOS_BESTEFFORT:
2936                 aifs = (p->aifs == -1) ? 3 : p->aifs;
2937                 cw_min = (p->cw_min == 0) ? aCWmin : p->cw_min;
2938                 cw_max = (p->cw_max == 0) ? aCWmax : p->cw_max;
2939                 break;
2940         case B43_QOS_BACKGROUND:
2941                 aifs = (p->aifs == -1) ? 7 : p->aifs;
2942                 cw_min = (p->cw_min == 0) ? aCWmin : p->cw_min;
2943                 cw_max = (p->cw_max == 0) ? aCWmax : p->cw_max;
2944                 break;
2945         default:
2946                 B43_WARN_ON(1);
2947                 return;
2948         }
2949         if (cw_min <= 0)
2950                 cw_min = aCWmin;
2951         if (cw_max <= 0)
2952                 cw_max = aCWmin;
2953         bslots = b43_read16(dev, B43_MMIO_RNG) % cw_min;
2954
2955         memset(&params, 0, sizeof(params));
2956
2957         params[B43_QOSPARAM_TXOP] = p->txop * 32;
2958         params[B43_QOSPARAM_CWMIN] = cw_min;
2959         params[B43_QOSPARAM_CWMAX] = cw_max;
2960         params[B43_QOSPARAM_CWCUR] = cw_min;
2961         params[B43_QOSPARAM_AIFS] = aifs;
2962         params[B43_QOSPARAM_BSLOTS] = bslots;
2963         params[B43_QOSPARAM_REGGAP] = bslots + aifs;
2964
2965         for (i = 0; i < ARRAY_SIZE(params); i++) {
2966                 if (i == B43_QOSPARAM_STATUS) {
2967                         tmp = b43_shm_read16(dev, B43_SHM_SHARED,
2968                                              shm_offset + (i * 2));
2969                         /* Mark the parameters as updated. */
2970                         tmp |= 0x100;
2971                         b43_shm_write16(dev, B43_SHM_SHARED,
2972                                         shm_offset + (i * 2),
2973                                         tmp);
2974                 } else {
2975                         b43_shm_write16(dev, B43_SHM_SHARED,
2976                                         shm_offset + (i * 2),
2977                                         params[i]);
2978                 }
2979         }
2980 }
2981
2982 /* Update the QOS parameters in hardware. */
2983 static void b43_qos_update(struct b43_wldev *dev)
2984 {
2985         struct b43_wl *wl = dev->wl;
2986         struct b43_qos_params *params;
2987         unsigned long flags;
2988         unsigned int i;
2989
2990         /* Mapping of mac80211 queues to b43 SHM offsets. */
2991         static const u16 qos_shm_offsets[] = {
2992                 [0] = B43_QOS_VOICE,
2993                 [1] = B43_QOS_VIDEO,
2994                 [2] = B43_QOS_BESTEFFORT,
2995                 [3] = B43_QOS_BACKGROUND,
2996         };
2997         BUILD_BUG_ON(ARRAY_SIZE(qos_shm_offsets) != ARRAY_SIZE(wl->qos_params));
2998
2999         b43_mac_suspend(dev);
3000         spin_lock_irqsave(&wl->irq_lock, flags);
3001
3002         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
3003                 params = &(wl->qos_params[i]);
3004                 if (params->need_hw_update) {
3005                         b43_qos_params_upload(dev, &(params->p),
3006                                               qos_shm_offsets[i]);
3007                         params->need_hw_update = 0;
3008                 }
3009         }
3010
3011         spin_unlock_irqrestore(&wl->irq_lock, flags);
3012         b43_mac_enable(dev);
3013 }
3014
3015 static void b43_qos_clear(struct b43_wl *wl)
3016 {
3017         struct b43_qos_params *params;
3018         unsigned int i;
3019
3020         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
3021                 params = &(wl->qos_params[i]);
3022
3023                 memset(&(params->p), 0, sizeof(params->p));
3024                 params->p.aifs = -1;
3025                 params->need_hw_update = 1;
3026         }
3027 }
3028
3029 /* Initialize the core's QOS capabilities */
3030 static void b43_qos_init(struct b43_wldev *dev)
3031 {
3032         struct b43_wl *wl = dev->wl;
3033         unsigned int i;
3034
3035         /* Upload the current QOS parameters. */
3036         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++)
3037                 wl->qos_params[i].need_hw_update = 1;
3038         b43_qos_update(dev);
3039
3040         /* Enable QOS support. */
3041         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF);
3042         b43_write16(dev, B43_MMIO_IFSCTL,
3043                     b43_read16(dev, B43_MMIO_IFSCTL)
3044                     | B43_MMIO_IFSCTL_USE_EDCF);
3045 }
3046
3047 static void b43_qos_update_work(struct work_struct *work)
3048 {
3049         struct b43_wl *wl = container_of(work, struct b43_wl, qos_update_work);
3050         struct b43_wldev *dev;
3051
3052         mutex_lock(&wl->mutex);
3053         dev = wl->current_dev;
3054         if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED)))
3055                 b43_qos_update(dev);
3056         mutex_unlock(&wl->mutex);
3057 }
3058
3059 static int b43_op_conf_tx(struct ieee80211_hw *hw,
3060                           int _queue,
3061                           const struct ieee80211_tx_queue_params *params)
3062 {
3063         struct b43_wl *wl = hw_to_b43_wl(hw);
3064         unsigned long flags;
3065         unsigned int queue = (unsigned int)_queue;
3066         struct b43_qos_params *p;
3067
3068         if (queue >= ARRAY_SIZE(wl->qos_params)) {
3069                 /* Queue not available or don't support setting
3070                  * params on this queue. Return success to not
3071                  * confuse mac80211. */
3072                 return 0;
3073         }
3074
3075         spin_lock_irqsave(&wl->irq_lock, flags);
3076         p = &(wl->qos_params[queue]);
3077         memcpy(&(p->p), params, sizeof(p->p));
3078         p->need_hw_update = 1;
3079         spin_unlock_irqrestore(&wl->irq_lock, flags);
3080
3081         queue_work(hw->workqueue, &wl->qos_update_work);
3082
3083         return 0;
3084 }
3085
3086 static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
3087                                struct ieee80211_tx_queue_stats *stats)
3088 {
3089         struct b43_wl *wl = hw_to_b43_wl(hw);
3090         struct b43_wldev *dev = wl->current_dev;
3091         unsigned long flags;
3092         int err = -ENODEV;
3093
3094         if (!dev)
3095                 goto out;
3096         spin_lock_irqsave(&wl->irq_lock, flags);
3097         if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
3098                 if (b43_using_pio_transfers(dev))
3099                         b43_pio_get_tx_stats(dev, stats);
3100                 else
3101                         b43_dma_get_tx_stats(dev, stats);
3102                 err = 0;
3103         }
3104         spin_unlock_irqrestore(&wl->irq_lock, flags);
3105 out:
3106         return err;
3107 }
3108
3109 static int b43_op_get_stats(struct ieee80211_hw *hw,
3110                             struct ieee80211_low_level_stats *stats)
3111 {
3112         struct b43_wl *wl = hw_to_b43_wl(hw);
3113         unsigned long flags;
3114
3115         spin_lock_irqsave(&wl->irq_lock, flags);
3116         memcpy(stats, &wl->ieee_stats, sizeof(*stats));
3117         spin_unlock_irqrestore(&wl->irq_lock, flags);
3118
3119         return 0;
3120 }
3121
3122 static void b43_put_phy_into_reset(struct b43_wldev *dev)
3123 {
3124         struct ssb_device *sdev = dev->dev;
3125         u32 tmslow;
3126
3127         tmslow = ssb_read32(sdev, SSB_TMSLOW);
3128         tmslow &= ~B43_TMSLOW_GMODE;
3129         tmslow |= B43_TMSLOW_PHYRESET;
3130         tmslow |= SSB_TMSLOW_FGC;
3131         ssb_write32(sdev, SSB_TMSLOW, tmslow);
3132         msleep(1);
3133
3134         tmslow = ssb_read32(sdev, SSB_TMSLOW);
3135         tmslow &= ~SSB_TMSLOW_FGC;
3136         tmslow |= B43_TMSLOW_PHYRESET;
3137         ssb_write32(sdev, SSB_TMSLOW, tmslow);
3138         msleep(1);
3139 }
3140
3141 static const char * band_to_string(enum ieee80211_band band)
3142 {
3143         switch (band) {
3144         case IEEE80211_BAND_5GHZ:
3145                 return "5";
3146         case IEEE80211_BAND_2GHZ:
3147                 return "2.4";
3148         default:
3149                 break;
3150         }
3151         B43_WARN_ON(1);
3152         return "";
3153 }
3154
3155 /* Expects wl->mutex locked */
3156 static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
3157 {
3158         struct b43_wldev *up_dev = NULL;
3159         struct b43_wldev *down_dev;
3160         struct b43_wldev *d;
3161         int err;
3162         bool gmode;
3163         int prev_status;
3164
3165         /* Find a device and PHY which supports the band. */
3166         list_for_each_entry(d, &wl->devlist, list) {
3167                 switch (chan->band) {
3168                 case IEEE80211_BAND_5GHZ:
3169                         if (d->phy.supports_5ghz) {
3170                                 up_dev = d;
3171                                 gmode = 0;
3172                         }
3173                         break;
3174                 case IEEE80211_BAND_2GHZ:
3175                         if (d->phy.supports_2ghz) {
3176                                 up_dev = d;
3177                                 gmode = 1;
3178                         }
3179                         break;
3180                 default:
3181                         B43_WARN_ON(1);
3182                         return -EINVAL;
3183                 }
3184                 if (up_dev)
3185                         break;
3186         }
3187         if (!up_dev) {
3188                 b43err(wl, "Could not find a device for %s-GHz band operation\n",
3189                        band_to_string(chan->band));
3190                 return -ENODEV;
3191         }
3192         if ((up_dev == wl->current_dev) &&
3193             (!!wl->current_dev->phy.gmode == !!gmode)) {
3194                 /* This device is already running. */
3195                 return 0;
3196         }
3197         b43dbg(wl, "Switching to %s-GHz band\n",
3198                band_to_string(chan->band));
3199         down_dev = wl->current_dev;
3200
3201         prev_status = b43_status(down_dev);
3202         /* Shutdown the currently running core. */
3203         if (prev_status >= B43_STAT_STARTED)
3204                 b43_wireless_core_stop(down_dev);
3205         if (prev_status >= B43_STAT_INITIALIZED)
3206                 b43_wireless_core_exit(down_dev);
3207
3208         if (down_dev != up_dev) {
3209                 /* We switch to a different core, so we put PHY into
3210                  * RESET on the old core. */
3211                 b43_put_phy_into_reset(down_dev);
3212         }
3213
3214         /* Now start the new core. */
3215         up_dev->phy.gmode = gmode;
3216         if (prev_status >= B43_STAT_INITIALIZED) {
3217                 err = b43_wireless_core_init(up_dev);
3218                 if (err) {
3219                         b43err(wl, "Fatal: Could not initialize device for "
3220                                "selected %s-GHz band\n",
3221                                band_to_string(chan->band));
3222                         goto init_failure;
3223                 }
3224         }
3225         if (prev_status >= B43_STAT_STARTED) {
3226                 err = b43_wireless_core_start(up_dev);
3227                 if (err) {
3228                         b43err(wl, "Fatal: Coult not start device for "
3229                                "selected %s-GHz band\n",
3230                                band_to_string(chan->band));
3231                         b43_wireless_core_exit(up_dev);
3232                         goto init_failure;
3233                 }
3234         }
3235         B43_WARN_ON(b43_status(up_dev) != prev_status);
3236
3237         wl->current_dev = up_dev;
3238
3239         return 0;
3240 init_failure:
3241         /* Whoops, failed to init the new core. No core is operating now. */
3242         wl->current_dev = NULL;
3243         return err;
3244 }
3245
3246 static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
3247 {
3248         struct b43_wl *wl = hw_to_b43_wl(hw);
3249         struct b43_wldev *dev;
3250         struct b43_phy *phy;
3251         unsigned long flags;
3252         int antenna;
3253         int err = 0;
3254         u32 savedirqs;
3255
3256         mutex_lock(&wl->mutex);
3257
3258         /* Switch the band (if necessary). This might change the active core. */
3259         err = b43_switch_band(wl, conf->channel);
3260         if (err)
3261                 goto out_unlock_mutex;
3262         dev = wl->current_dev;
3263         phy = &dev->phy;
3264
3265         /* Disable IRQs while reconfiguring the device.
3266          * This makes it possible to drop the spinlock throughout
3267          * the reconfiguration process. */
3268         spin_lock_irqsave(&wl->irq_lock, flags);
3269         if (b43_status(dev) < B43_STAT_STARTED) {
3270                 spin_unlock_irqrestore(&wl->irq_lock, flags);
3271                 goto out_unlock_mutex;
3272         }
3273         savedirqs = b43_interrupt_disable(dev, B43_IRQ_ALL);
3274         spin_unlock_irqrestore(&wl->irq_lock, flags);
3275         b43_synchronize_irq(dev);
3276
3277         /* Switch to the requested channel.
3278          * The firmware takes care of races with the TX handler. */
3279         if (conf->channel->hw_value != phy->channel)
3280                 b43_radio_selectchannel(dev, conf->channel->hw_value, 0);
3281
3282         /* Enable/Disable ShortSlot timing. */
3283         if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) !=
3284             dev->short_slot) {
3285                 B43_WARN_ON(phy->type != B43_PHYTYPE_G);
3286                 if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)
3287                         b43_short_slot_timing_enable(dev);
3288                 else
3289                         b43_short_slot_timing_disable(dev);
3290         }
3291
3292         dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
3293
3294         /* Adjust the desired TX power level. */
3295         if (conf->power_level != 0) {
3296                 if (conf->power_level != phy->power_level) {
3297                         phy->power_level = conf->power_level;
3298                         b43_phy_xmitpower(dev);
3299                 }
3300         }
3301
3302         /* Antennas for RX and management frame TX. */
3303         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
3304         b43_mgmtframe_txantenna(dev, antenna);
3305         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
3306         b43_set_rx_antenna(dev, antenna);
3307
3308         /* Update templates for AP mode. */
3309         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
3310                 b43_set_beacon_int(dev, conf->beacon_int);
3311
3312         if (!!conf->radio_enabled != phy->radio_on) {
3313                 if (conf->radio_enabled) {
3314                         b43_radio_turn_on(dev);
3315                         b43info(dev->wl, "Radio turned on by software\n");
3316                         if (!dev->radio_hw_enable) {
3317                                 b43info(dev->wl, "The hardware RF-kill button "
3318                                         "still turns the radio physically off. "
3319                                         "Press the button to turn it on.\n");
3320                         }
3321                 } else {
3322                         b43_radio_turn_off(dev, 0);
3323                         b43info(dev->wl, "Radio turned off by software\n");
3324                 }
3325         }
3326
3327         spin_lock_irqsave(&wl->irq_lock, flags);
3328         b43_interrupt_enable(dev, savedirqs);
3329         mmiowb();
3330         spin_unlock_irqrestore(&wl->irq_lock, flags);
3331       out_unlock_mutex:
3332         mutex_unlock(&wl->mutex);
3333
3334         return err;
3335 }
3336
3337 static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
3338                            const u8 *local_addr, const u8 *addr,
3339                            struct ieee80211_key_conf *key)
3340 {
3341         struct b43_wl *wl = hw_to_b43_wl(hw);
3342         struct b43_wldev *dev;
3343         unsigned long flags;
3344         u8 algorithm;
3345         u8 index;
3346         int err;
3347         DECLARE_MAC_BUF(mac);
3348
3349         if (modparam_nohwcrypt)
3350                 return -ENOSPC; /* User disabled HW-crypto */
3351
3352         mutex_lock(&wl->mutex);
3353         spin_lock_irqsave(&wl->irq_lock, flags);
3354
3355         dev = wl->current_dev;
3356         err = -ENODEV;
3357         if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
3358                 goto out_unlock;
3359
3360         err = -EINVAL;
3361         switch (key->alg) {
3362         case ALG_WEP:
3363                 if (key->keylen == 5)
3364                         algorithm = B43_SEC_ALGO_WEP40;
3365                 else
3366                         algorithm = B43_SEC_ALGO_WEP104;
3367                 break;
3368         case ALG_TKIP:
3369                 algorithm = B43_SEC_ALGO_TKIP;
3370                 break;
3371         case ALG_CCMP:
3372                 algorithm = B43_SEC_ALGO_AES;
3373                 break;
3374         default:
3375                 B43_WARN_ON(1);
3376                 goto out_unlock;
3377         }
3378         index = (u8) (key->keyidx);
3379         if (index > 3)
3380                 goto out_unlock;
3381
3382         switch (cmd) {
3383         case SET_KEY:
3384                 if (algorithm == B43_SEC_ALGO_TKIP) {
3385                         /* FIXME: No TKIP hardware encryption for now. */
3386                         err = -EOPNOTSUPP;
3387                         goto out_unlock;
3388                 }
3389
3390                 if (is_broadcast_ether_addr(addr)) {
3391                         /* addr is FF:FF:FF:FF:FF:FF for default keys */
3392                         err = b43_key_write(dev, index, algorithm,
3393                                             key->key, key->keylen, NULL, key);
3394                 } else {
3395                         /*
3396                          * either pairwise key or address is 00:00:00:00:00:00
3397                          * for transmit-only keys
3398                          */
3399                         err = b43_key_write(dev, -1, algorithm,
3400                                             key->key, key->keylen, addr, key);
3401                 }
3402                 if (err)
3403                         goto out_unlock;
3404
3405                 if (algorithm == B43_SEC_ALGO_WEP40 ||
3406                     algorithm == B43_SEC_ALGO_WEP104) {
3407                         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS);
3408                 } else {
3409                         b43_hf_write(dev,
3410                                      b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
3411                 }
3412                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
3413                 break;
3414         case DISABLE_KEY: {
3415                 err = b43_key_clear(dev, key->hw_key_idx);
3416                 if (err)
3417                         goto out_unlock;
3418                 break;
3419         }
3420         default:
3421                 B43_WARN_ON(1);
3422         }
3423 out_unlock:
3424         spin_unlock_irqrestore(&wl->irq_lock, flags);
3425         mutex_unlock(&wl->mutex);
3426         if (!err) {
3427                 b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
3428                        "mac: %s\n",
3429                        cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
3430                        print_mac(mac, addr));
3431         }
3432         return err;
3433 }
3434
3435 static void b43_op_configure_filter(struct ieee80211_hw *hw,
3436                                     unsigned int changed, unsigned int *fflags,
3437                                     int mc_count, struct dev_addr_list *mc_list)
3438 {
3439         struct b43_wl *wl = hw_to_b43_wl(hw);
3440         struct b43_wldev *dev = wl->current_dev;
3441         unsigned long flags;
3442
3443         if (!dev) {
3444                 *fflags = 0;
3445                 return;
3446         }
3447
3448         spin_lock_irqsave(&wl->irq_lock, flags);
3449         *fflags &= FIF_PROMISC_IN_BSS |
3450                   FIF_ALLMULTI |
3451                   FIF_FCSFAIL |
3452                   FIF_PLCPFAIL |
3453                   FIF_CONTROL |
3454                   FIF_OTHER_BSS |
3455                   FIF_BCN_PRBRESP_PROMISC;
3456
3457         changed &= FIF_PROMISC_IN_BSS |
3458                    FIF_ALLMULTI |
3459                    FIF_FCSFAIL |
3460                    FIF_PLCPFAIL |
3461                    FIF_CONTROL |
3462                    FIF_OTHER_BSS |
3463                    FIF_BCN_PRBRESP_PROMISC;
3464
3465         wl->filter_flags = *fflags;
3466
3467         if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
3468                 b43_adjust_opmode(dev);
3469         spin_unlock_irqrestore(&wl->irq_lock, flags);
3470 }
3471
3472 static int b43_op_config_interface(struct ieee80211_hw *hw,
3473                                    struct ieee80211_vif *vif,
3474                                    struct ieee80211_if_conf *conf)
3475 {
3476         struct b43_wl *wl = hw_to_b43_wl(hw);
3477         struct b43_wldev *dev = wl->current_dev;
3478         unsigned long flags;
3479
3480         if (!dev)
3481                 return -ENODEV;
3482         mutex_lock(&wl->mutex);
3483         spin_lock_irqsave(&wl->irq_lock, flags);
3484         B43_WARN_ON(wl->vif != vif);
3485         if (conf->bssid)
3486                 memcpy(wl->bssid, conf->bssid, ETH_ALEN);
3487         else
3488                 memset(wl->bssid, 0, ETH_ALEN);
3489         if (b43_status(dev) >= B43_STAT_INITIALIZED) {
3490                 if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) {
3491                         B43_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP);
3492                         b43_set_ssid(dev, conf->ssid, conf->ssid_len);
3493                         if (conf->beacon) {
3494                                 b43_update_templates(wl, conf->beacon,
3495                                                      conf->beacon_control);
3496                         }
3497                 }
3498                 b43_write_mac_bssid_templates(dev);
3499         }
3500         spin_unlock_irqrestore(&wl->irq_lock, flags);
3501         mutex_unlock(&wl->mutex);
3502
3503         return 0;
3504 }
3505
3506 /* Locking: wl->mutex */
3507 static void b43_wireless_core_stop(struct b43_wldev *dev)
3508 {
3509         struct b43_wl *wl = dev->wl;
3510         unsigned long flags;
3511
3512         if (b43_status(dev) < B43_STAT_STARTED)
3513                 return;
3514
3515         /* Disable and sync interrupts. We must do this before than
3516          * setting the status to INITIALIZED, as the interrupt handler
3517          * won't care about IRQs then. */
3518         spin_lock_irqsave(&wl->irq_lock, flags);
3519         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
3520         b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
3521         spin_unlock_irqrestore(&wl->irq_lock, flags);
3522         b43_synchronize_irq(dev);
3523
3524         write_lock_irqsave(&wl->tx_lock, flags);
3525         b43_set_status(dev, B43_STAT_INITIALIZED);
3526         write_unlock_irqrestore(&wl->tx_lock, flags);
3527
3528         b43_pio_stop(dev);
3529         mutex_unlock(&wl->mutex);
3530         /* Must unlock as it would otherwise deadlock. No races here.
3531          * Cancel the possibly running self-rearming periodic work. */
3532         cancel_delayed_work_sync(&dev->periodic_work);
3533         mutex_lock(&wl->mutex);
3534
3535         b43_mac_suspend(dev);
3536         free_irq(dev->dev->irq, dev);
3537         b43dbg(wl, "Wireless interface stopped\n");
3538 }
3539
3540 /* Locking: wl->mutex */
3541 static int b43_wireless_core_start(struct b43_wldev *dev)
3542 {
3543         int err;
3544
3545         B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
3546
3547         drain_txstatus_queue(dev);
3548         err = request_irq(dev->dev->irq, b43_interrupt_handler,
3549                           IRQF_SHARED, KBUILD_MODNAME, dev);
3550         if (err) {
3551                 b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
3552                 goto out;
3553         }
3554
3555         /* We are ready to run. */
3556         b43_set_status(dev, B43_STAT_STARTED);
3557
3558         /* Start data flow (TX/RX). */
3559         b43_mac_enable(dev);
3560         b43_interrupt_enable(dev, dev->irq_savedstate);
3561         ieee80211_start_queues(dev->wl->hw);
3562
3563         /* Start maintainance work */
3564         b43_periodic_tasks_setup(dev);
3565
3566         b43dbg(dev->wl, "Wireless interface started\n");
3567       out:
3568         return err;
3569 }
3570
3571 /* Get PHY and RADIO versioning numbers */
3572 static int b43_phy_versioning(struct b43_wldev *dev)
3573 {
3574         struct b43_phy *phy = &dev->phy;
3575         u32 tmp;
3576         u8 analog_type;
3577         u8 phy_type;
3578         u8 phy_rev;
3579         u16 radio_manuf;
3580         u16 radio_ver;
3581         u16 radio_rev;
3582         int unsupported = 0;
3583
3584         /* Get PHY versioning */
3585         tmp = b43_read16(dev, B43_MMIO_PHY_VER);
3586         analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT;
3587         phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
3588         phy_rev = (tmp & B43_PHYVER_VERSION);
3589         switch (phy_type) {
3590         case B43_PHYTYPE_A:
3591                 if (phy_rev >= 4)
3592                         unsupported = 1;
3593                 break;
3594         case B43_PHYTYPE_B:
3595                 if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6
3596                     && phy_rev != 7)
3597                         unsupported = 1;
3598                 break;
3599         case B43_PHYTYPE_G:
3600                 if (phy_rev > 9)
3601                         unsupported = 1;
3602                 break;
3603 #ifdef CONFIG_B43_NPHY
3604         case B43_PHYTYPE_N:
3605                 if (phy_rev > 1)
3606                         unsupported = 1;
3607                 break;
3608 #endif
3609         default:
3610                 unsupported = 1;
3611         };
3612         if (unsupported) {
3613                 b43err(dev->wl, "FOUND UNSUPPORTED PHY "
3614                        "(Analog %u, Type %u, Revision %u)\n",
3615                        analog_type, phy_type, phy_rev);
3616                 return -EOPNOTSUPP;
3617         }
3618         b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
3619                analog_type, phy_type, phy_rev);
3620
3621         /* Get RADIO versioning */
3622         if (dev->dev->bus->chip_id == 0x4317) {
3623                 if (dev->dev->bus->chip_rev == 0)
3624                         tmp = 0x3205017F;
3625                 else if (dev->dev->bus->chip_rev == 1)
3626                         tmp = 0x4205017F;
3627                 else
3628                         tmp = 0x5205017F;
3629         } else {
3630                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3631                 tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
3632                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3633                 tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16;
3634         }
3635         radio_manuf = (tmp & 0x00000FFF);
3636         radio_ver = (tmp & 0x0FFFF000) >> 12;
3637         radio_rev = (tmp & 0xF0000000) >> 28;
3638         if (radio_manuf != 0x17F /* Broadcom */)
3639                 unsupported = 1;
3640         switch (phy_type) {
3641         case B43_PHYTYPE_A:
3642                 if (radio_ver != 0x2060)
3643                         unsupported = 1;
3644                 if (radio_rev != 1)
3645                         unsupported = 1;
3646                 if (radio_manuf != 0x17F)
3647                         unsupported = 1;
3648                 break;
3649         case B43_PHYTYPE_B:
3650                 if ((radio_ver & 0xFFF0) != 0x2050)
3651                         unsupported = 1;
3652                 break;
3653         case B43_PHYTYPE_G:
3654                 if (radio_ver != 0x2050)
3655                         unsupported = 1;
3656                 break;
3657         case B43_PHYTYPE_N:
3658                 if (radio_ver != 0x2055)
3659                         unsupported = 1;
3660                 break;
3661         default:
3662                 B43_WARN_ON(1);
3663         }
3664         if (unsupported) {
3665                 b43err(dev->wl, "FOUND UNSUPPORTED RADIO "
3666                        "(Manuf 0x%X, Version 0x%X, Revision %u)\n",
3667                        radio_manuf, radio_ver, radio_rev);
3668                 return -EOPNOTSUPP;
3669         }
3670         b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n",
3671                radio_manuf, radio_ver, radio_rev);
3672
3673         phy->radio_manuf = radio_manuf;
3674         phy->radio_ver = radio_ver;
3675         phy->radio_rev = radio_rev;
3676
3677         phy->analog = analog_type;
3678         phy->type = phy_type;
3679         phy->rev = phy_rev;
3680
3681         return 0;
3682 }
3683
3684 static void setup_struct_phy_for_init(struct b43_wldev *dev,
3685                                       struct b43_phy *phy)
3686 {
3687         struct b43_txpower_lo_control *lo;
3688         int i;
3689
3690         memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
3691         memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
3692
3693         phy->aci_enable = 0;
3694         phy->aci_wlan_automatic = 0;
3695         phy->aci_hw_rssi = 0;
3696
3697         phy->radio_off_context.valid = 0;
3698
3699         lo = phy->lo_control;
3700         if (lo) {
3701                 memset(lo, 0, sizeof(*(phy->lo_control)));
3702                 lo->rebuild = 1;
3703                 lo->tx_bias = 0xFF;
3704         }
3705         phy->max_lb_gain = 0;
3706         phy->trsw_rx_gain = 0;
3707         phy->txpwr_offset = 0;
3708
3709         /* NRSSI */
3710         phy->nrssislope = 0;
3711         for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
3712                 phy->nrssi[i] = -1000;
3713         for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
3714                 phy->nrssi_lt[i] = i;
3715
3716         phy->lofcal = 0xFFFF;
3717         phy->initval = 0xFFFF;
3718
3719         phy->interfmode = B43_INTERFMODE_NONE;
3720         phy->channel = 0xFF;
3721
3722         phy->hardware_power_control = !!modparam_hwpctl;
3723
3724         /* PHY TX errors counter. */
3725         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
3726
3727         /* OFDM-table address caching. */
3728         phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN;
3729 }
3730
3731 static void setup_struct_wldev_for_init(struct b43_wldev *dev)
3732 {
3733         dev->dfq_valid = 0;
3734
3735         /* Assume the radio is enabled. If it's not enabled, the state will
3736          * immediately get fixed on the first periodic work run. */
3737         dev->radio_hw_enable = 1;
3738
3739         /* Stats */
3740         memset(&dev->stats, 0, sizeof(dev->stats));
3741
3742         setup_struct_phy_for_init(dev, &dev->phy);
3743
3744         /* IRQ related flags */
3745         dev->irq_reason = 0;
3746         memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
3747         dev->irq_savedstate = B43_IRQ_MASKTEMPLATE;
3748
3749         dev->mac_suspended = 1;
3750
3751         /* Noise calculation context */
3752         memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
3753 }
3754
3755 static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
3756 {
3757         struct ssb_sprom *sprom = &dev->dev->bus->sprom;
3758         u64 hf;
3759
3760         if (!modparam_btcoex)
3761                 return;
3762         if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
3763                 return;
3764         if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
3765                 return;
3766
3767         hf = b43_hf_read(dev);
3768         if (sprom->boardflags_lo & B43_BFL_BTCMOD)
3769                 hf |= B43_HF_BTCOEXALT;
3770         else
3771                 hf |= B43_HF_BTCOEX;
3772         b43_hf_write(dev, hf);
3773 }
3774
3775 static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
3776 {
3777         if (!modparam_btcoex)
3778                 return;
3779         //TODO
3780 }
3781
3782 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
3783 {
3784 #ifdef CONFIG_SSB_DRIVER_PCICORE
3785         struct ssb_bus *bus = dev->dev->bus;
3786         u32 tmp;
3787
3788         if (bus->pcicore.dev &&
3789             bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
3790             bus->pcicore.dev->id.revision <= 5) {
3791                 /* IMCFGLO timeouts workaround. */
3792                 tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
3793                 tmp &= ~SSB_IMCFGLO_REQTO;
3794                 tmp &= ~SSB_IMCFGLO_SERTO;
3795                 switch (bus->bustype) {
3796                 case SSB_BUSTYPE_PCI:
3797                 case SSB_BUSTYPE_PCMCIA:
3798                         tmp |= 0x32;
3799                         break;
3800                 case SSB_BUSTYPE_SSB:
3801                         tmp |= 0x53;
3802                         break;
3803                 }
3804                 ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
3805         }
3806 #endif /* CONFIG_SSB_DRIVER_PCICORE */
3807 }
3808
3809 /* Write the short and long frame retry limit values. */
3810 static void b43_set_retry_limits(struct b43_wldev *dev,
3811                                  unsigned int short_retry,
3812                                  unsigned int long_retry)
3813 {
3814         /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
3815          * the chip-internal counter. */
3816         short_retry = min(short_retry, (unsigned int)0xF);
3817         long_retry = min(long_retry, (unsigned int)0xF);
3818
3819         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
3820                         short_retry);
3821         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
3822                         long_retry);
3823 }
3824
3825 static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
3826 {
3827         u16 pu_delay;
3828
3829         /* The time value is in microseconds. */
3830         if (dev->phy.type == B43_PHYTYPE_A)
3831                 pu_delay = 3700;
3832         else
3833                 pu_delay = 1050;
3834         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle)
3835                 pu_delay = 500;
3836         if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
3837                 pu_delay = max(pu_delay, (u16)2400);
3838
3839         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SPUWKUP, pu_delay);
3840 }
3841
3842 /* Set the TSF CFP pre-TargetBeaconTransmissionTime. */
3843 static void b43_set_pretbtt(struct b43_wldev *dev)
3844 {
3845         u16 pretbtt;
3846
3847         /* The time value is in microseconds. */
3848         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) {
3849                 pretbtt = 2;
3850         } else {
3851                 if (dev->phy.type == B43_PHYTYPE_A)
3852                         pretbtt = 120;
3853                 else
3854                         pretbtt = 250;
3855         }
3856         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRETBTT, pretbtt);
3857         b43_write16(dev, B43_MMIO_TSF_CFP_PRETBTT, pretbtt);
3858 }
3859
3860 /* Shutdown a wireless core */
3861 /* Locking: wl->mutex */
3862 static void b43_wireless_core_exit(struct b43_wldev *dev)
3863 {
3864         struct b43_phy *phy = &dev->phy;
3865         u32 macctl;
3866
3867         B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED);
3868         if (b43_status(dev) != B43_STAT_INITIALIZED)
3869                 return;
3870         b43_set_status(dev, B43_STAT_UNINIT);
3871
3872         /* Stop the microcode PSM. */
3873         macctl = b43_read32(dev, B43_MMIO_MACCTL);
3874         macctl &= ~B43_MACCTL_PSM_RUN;
3875         macctl |= B43_MACCTL_PSM_JMP0;
3876         b43_write32(dev, B43_MMIO_MACCTL, macctl);
3877
3878         if (!dev->suspend_in_progress) {
3879                 b43_leds_exit(dev);
3880                 b43_rng_exit(dev->wl);
3881         }
3882         b43_dma_free(dev);
3883         b43_pio_free(dev);
3884         b43_chip_exit(dev);
3885         b43_radio_turn_off(dev, 1);
3886         b43_switch_analog(dev, 0);
3887         if (phy->dyn_tssi_tbl)
3888                 kfree(phy->tssi2dbm);
3889         kfree(phy->lo_control);
3890         phy->lo_control = NULL;
3891         if (dev->wl->current_beacon) {
3892                 dev_kfree_skb_any(dev->wl->current_beacon);
3893                 dev->wl->current_beacon = NULL;
3894         }
3895
3896         ssb_device_disable(dev->dev, 0);
3897         ssb_bus_may_powerdown(dev->dev->bus);
3898 }
3899
3900 /* Initialize a wireless core */
3901 static int b43_wireless_core_init(struct b43_wldev *dev)
3902 {
3903         struct b43_wl *wl = dev->wl;
3904         struct ssb_bus *bus = dev->dev->bus;
3905         struct ssb_sprom *sprom = &bus->sprom;
3906         struct b43_phy *phy = &dev->phy;
3907         int err;
3908         u64 hf;
3909         u32 tmp;
3910
3911         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
3912
3913         err = ssb_bus_powerup(bus, 0);
3914         if (err)
3915                 goto out;
3916         if (!ssb_device_is_enabled(dev->dev)) {
3917                 tmp = phy->gmode ? B43_TMSLOW_GMODE : 0;
3918                 b43_wireless_core_reset(dev, tmp);
3919         }
3920
3921         if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) {
3922                 phy->lo_control =
3923                     kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL);
3924                 if (!phy->lo_control) {
3925                         err = -ENOMEM;
3926                         goto err_busdown;
3927                 }
3928         }
3929         setup_struct_wldev_for_init(dev);
3930
3931         err = b43_phy_init_tssi2dbm_table(dev);
3932         if (err)
3933                 goto err_kfree_lo_control;
3934
3935         /* Enable IRQ routing to this device. */
3936         ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
3937
3938         b43_imcfglo_timeouts_workaround(dev);
3939         b43_bluetooth_coext_disable(dev);
3940         b43_phy_early_init(dev);
3941         err = b43_chip_init(dev);
3942         if (err)
3943                 goto err_kfree_tssitbl;
3944         b43_shm_write16(dev, B43_SHM_SHARED,
3945                         B43_SHM_SH_WLCOREREV, dev->dev->id.revision);
3946         hf = b43_hf_read(dev);
3947         if (phy->type == B43_PHYTYPE_G) {
3948                 hf |= B43_HF_SYMW;
3949                 if (phy->rev == 1)
3950                         hf |= B43_HF_GDCW;
3951                 if (sprom->boardflags_lo & B43_BFL_PACTRL)
3952                         hf |= B43_HF_OFDMPABOOST;
3953         } else if (phy->type == B43_PHYTYPE_B) {
3954                 hf |= B43_HF_SYMW;
3955                 if (phy->rev >= 2 && phy->radio_ver == 0x2050)
3956                         hf &= ~B43_HF_GDCW;
3957         }
3958         b43_hf_write(dev, hf);
3959
3960         b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT,
3961                              B43_DEFAULT_LONG_RETRY_LIMIT);
3962         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3);
3963         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2);
3964
3965         /* Disable sending probe responses from firmware.
3966          * Setting the MaxTime to one usec will always trigger
3967          * a timeout, so we never send any probe resp.
3968          * A timeout of zero is infinite. */
3969         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1);
3970
3971         b43_rate_memory_init(dev);
3972         b43_set_phytxctl_defaults(dev);
3973
3974         /* Minimum Contention Window */
3975         if (phy->type == B43_PHYTYPE_B) {
3976                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F);
3977         } else {
3978                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF);
3979         }
3980         /* Maximum Contention Window */
3981         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
3982
3983         if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) {
3984                 dev->__using_pio_transfers = 1;
3985                 err = b43_pio_init(dev);
3986         } else {
3987                 dev->__using_pio_transfers = 0;
3988                 err = b43_dma_init(dev);
3989         }
3990         if (err)
3991                 goto err_chip_exit;
3992         b43_qos_init(dev);
3993         b43_set_synth_pu_delay(dev, 1);
3994         b43_bluetooth_coext_enable(dev);
3995
3996         ssb_bus_powerup(bus, 1);        /* Enable dynamic PCTL */
3997         b43_upload_card_macaddress(dev);
3998         b43_security_init(dev);
3999         if (!dev->suspend_in_progress)
4000                 b43_rng_init(wl);
4001
4002         b43_set_status(dev, B43_STAT_INITIALIZED);
4003
4004         if (!dev->suspend_in_progress)
4005                 b43_leds_init(dev);
4006 out:
4007         return err;
4008
4009       err_chip_exit:
4010         b43_chip_exit(dev);
4011       err_kfree_tssitbl:
4012         if (phy->dyn_tssi_tbl)
4013                 kfree(phy->tssi2dbm);
4014       err_kfree_lo_control:
4015         kfree(phy->lo_control);
4016         phy->lo_control = NULL;
4017       err_busdown:
4018         ssb_bus_may_powerdown(bus);
4019         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
4020         return err;
4021 }
4022
4023 static int b43_op_add_interface(struct ieee80211_hw *hw,
4024                                 struct ieee80211_if_init_conf *conf)
4025 {
4026         struct b43_wl *wl = hw_to_b43_wl(hw);
4027         struct b43_wldev *dev;
4028         unsigned long flags;
4029         int err = -EOPNOTSUPP;
4030
4031         /* TODO: allow WDS/AP devices to coexist */
4032
4033         if (conf->type != IEEE80211_IF_TYPE_AP &&
4034             conf->type != IEEE80211_IF_TYPE_STA &&
4035             conf->type != IEEE80211_IF_TYPE_WDS &&
4036             conf->type != IEEE80211_IF_TYPE_IBSS)
4037                 return -EOPNOTSUPP;
4038
4039         mutex_lock(&wl->mutex);
4040         if (wl->operating)
4041                 goto out_mutex_unlock;
4042
4043         b43dbg(wl, "Adding Interface type %d\n", conf->type);
4044
4045         dev = wl->current_dev;
4046         wl->operating = 1;
4047         wl->vif = conf->vif;
4048         wl->if_type = conf->type;
4049         memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
4050
4051         spin_lock_irqsave(&wl->irq_lock, flags);
4052         b43_adjust_opmode(dev);
4053         b43_set_pretbtt(dev);
4054         b43_set_synth_pu_delay(dev, 0);
4055         b43_upload_card_macaddress(dev);
4056         spin_unlock_irqrestore(&wl->irq_lock, flags);
4057
4058         err = 0;
4059  out_mutex_unlock:
4060         mutex_unlock(&wl->mutex);
4061
4062         return err;
4063 }
4064
4065 static void b43_op_remove_interface(struct ieee80211_hw *hw,
4066                                     struct ieee80211_if_init_conf *conf)
4067 {
4068         struct b43_wl *wl = hw_to_b43_wl(hw);
4069         struct b43_wldev *dev = wl->current_dev;
4070         unsigned long flags;
4071
4072         b43dbg(wl, "Removing Interface type %d\n", conf->type);
4073
4074         mutex_lock(&wl->mutex);
4075
4076         B43_WARN_ON(!wl->operating);
4077         B43_WARN_ON(wl->vif != conf->vif);
4078         wl->vif = NULL;
4079
4080         wl->operating = 0;
4081
4082         spin_lock_irqsave(&wl->irq_lock, flags);
4083         b43_adjust_opmode(dev);
4084         memset(wl->mac_addr, 0, ETH_ALEN);
4085         b43_upload_card_macaddress(dev);
4086         spin_unlock_irqrestore(&wl->irq_lock, flags);
4087
4088         mutex_unlock(&wl->mutex);
4089 }
4090
4091 static int b43_op_start(struct ieee80211_hw *hw)
4092 {
4093         struct b43_wl *wl = hw_to_b43_wl(hw);
4094         struct b43_wldev *dev = wl->current_dev;
4095         int did_init = 0;
4096         int err = 0;
4097         bool do_rfkill_exit = 0;
4098
4099         /* Kill all old instance specific information to make sure
4100          * the card won't use it in the short timeframe between start
4101          * and mac80211 reconfiguring it. */
4102         memset(wl->bssid, 0, ETH_ALEN);
4103         memset(wl->mac_addr, 0, ETH_ALEN);
4104         wl->filter_flags = 0;
4105         wl->radiotap_enabled = 0;
4106         b43_qos_clear(wl);
4107         wl->beacon0_uploaded = 0;
4108         wl->beacon1_uploaded = 0;
4109         wl->beacon_templates_virgin = 1;
4110
4111         /* First register RFkill.
4112          * LEDs that are registered later depend on it. */
4113         b43_rfkill_init(dev);
4114
4115         mutex_lock(&wl->mutex);
4116
4117         if (b43_status(dev) < B43_STAT_INITIALIZED) {
4118                 err = b43_wireless_core_init(dev);
4119                 if (err) {
4120                         do_rfkill_exit = 1;
4121                         goto out_mutex_unlock;
4122                 }
4123                 did_init = 1;
4124         }
4125
4126         if (b43_status(dev) < B43_STAT_STARTED) {
4127                 err = b43_wireless_core_start(dev);
4128                 if (err) {
4129                         if (did_init)
4130                                 b43_wireless_core_exit(dev);
4131                         do_rfkill_exit = 1;
4132                         goto out_mutex_unlock;
4133                 }
4134         }
4135
4136  out_mutex_unlock:
4137         mutex_unlock(&wl->mutex);
4138
4139         if (do_rfkill_exit)
4140                 b43_rfkill_exit(dev);
4141
4142         return err;
4143 }
4144
4145 static void b43_op_stop(struct ieee80211_hw *hw)
4146 {
4147         struct b43_wl *wl = hw_to_b43_wl(hw);
4148         struct b43_wldev *dev = wl->current_dev;
4149
4150         b43_rfkill_exit(dev);
4151         cancel_work_sync(&(wl->qos_update_work));
4152         cancel_work_sync(&(wl->beacon_update_trigger));
4153
4154         mutex_lock(&wl->mutex);
4155         if (b43_status(dev) >= B43_STAT_STARTED)
4156                 b43_wireless_core_stop(dev);
4157         b43_wireless_core_exit(dev);
4158         mutex_unlock(&wl->mutex);
4159 }
4160
4161 static int b43_op_set_retry_limit(struct ieee80211_hw *hw,
4162                                   u32 short_retry_limit, u32 long_retry_limit)
4163 {
4164         struct b43_wl *wl = hw_to_b43_wl(hw);
4165         struct b43_wldev *dev;
4166         int err = 0;
4167
4168         mutex_lock(&wl->mutex);
4169         dev = wl->current_dev;
4170         if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) {
4171                 err = -ENODEV;
4172                 goto out_unlock;
4173         }
4174         b43_set_retry_limits(dev, short_retry_limit, long_retry_limit);
4175 out_unlock:
4176         mutex_unlock(&wl->mutex);
4177
4178         return err;
4179 }
4180
4181 static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set)
4182 {
4183         struct b43_wl *wl = hw_to_b43_wl(hw);
4184         struct sk_buff *beacon;
4185         unsigned long flags;
4186         struct ieee80211_tx_control txctl;
4187
4188         /* We could modify the existing beacon and set the aid bit in
4189          * the TIM field, but that would probably require resizing and
4190          * moving of data within the beacon template.
4191          * Simply request a new beacon and let mac80211 do the hard work. */
4192         beacon = ieee80211_beacon_get(hw, wl->vif, &txctl);
4193         if (unlikely(!beacon))
4194                 return -ENOMEM;
4195         spin_lock_irqsave(&wl->irq_lock, flags);
4196         b43_update_templates(wl, beacon, &txctl);
4197         spin_unlock_irqrestore(&wl->irq_lock, flags);
4198
4199         return 0;
4200 }
4201
4202 static int b43_op_ibss_beacon_update(struct ieee80211_hw *hw,
4203                                      struct sk_buff *beacon,
4204                                      struct ieee80211_tx_control *ctl)
4205 {
4206         struct b43_wl *wl = hw_to_b43_wl(hw);
4207         unsigned long flags;
4208
4209         spin_lock_irqsave(&wl->irq_lock, flags);
4210         b43_update_templates(wl, beacon, ctl);
4211         spin_unlock_irqrestore(&wl->irq_lock, flags);
4212
4213         return 0;
4214 }
4215
4216 static void b43_op_sta_notify(struct ieee80211_hw *hw,
4217                               struct ieee80211_vif *vif,
4218                               enum sta_notify_cmd notify_cmd,
4219                               const u8 *addr)
4220 {
4221         struct b43_wl *wl = hw_to_b43_wl(hw);
4222
4223         B43_WARN_ON(!vif || wl->vif != vif);
4224 }
4225
4226 static const struct ieee80211_ops b43_hw_ops = {
4227         .tx                     = b43_op_tx,
4228         .conf_tx                = b43_op_conf_tx,
4229         .add_interface          = b43_op_add_interface,
4230         .remove_interface       = b43_op_remove_interface,
4231         .config                 = b43_op_config,
4232         .config_interface       = b43_op_config_interface,
4233         .configure_filter       = b43_op_configure_filter,
4234         .set_key                = b43_op_set_key,
4235         .get_stats              = b43_op_get_stats,
4236         .get_tx_stats           = b43_op_get_tx_stats,
4237         .start                  = b43_op_start,
4238         .stop                   = b43_op_stop,
4239         .set_retry_limit        = b43_op_set_retry_limit,
4240         .set_tim                = b43_op_beacon_set_tim,
4241         .beacon_update          = b43_op_ibss_beacon_update,
4242         .sta_notify             = b43_op_sta_notify,
4243 };
4244
4245 /* Hard-reset the chip. Do not call this directly.
4246  * Use b43_controller_restart()
4247  */
4248 static void b43_chip_reset(struct work_struct *work)
4249 {
4250         struct b43_wldev *dev =
4251             container_of(work, struct b43_wldev, restart_work);
4252         struct b43_wl *wl = dev->wl;
4253         int err = 0;
4254         int prev_status;
4255
4256         mutex_lock(&wl->mutex);
4257
4258         prev_status = b43_status(dev);
4259         /* Bring the device down... */
4260         if (prev_status >= B43_STAT_STARTED)
4261                 b43_wireless_core_stop(dev);
4262         if (prev_status >= B43_STAT_INITIALIZED)
4263                 b43_wireless_core_exit(dev);
4264
4265         /* ...and up again. */
4266         if (prev_status >= B43_STAT_INITIALIZED) {
4267                 err = b43_wireless_core_init(dev);
4268                 if (err)
4269                         goto out;
4270         }
4271         if (prev_status >= B43_STAT_STARTED) {
4272                 err = b43_wireless_core_start(dev);
4273                 if (err) {
4274                         b43_wireless_core_exit(dev);
4275                         goto out;
4276                 }
4277         }
4278 out:
4279         if (err)
4280                 wl->current_dev = NULL; /* Failed to init the dev. */
4281         mutex_unlock(&wl->mutex);
4282         if (err)
4283                 b43err(wl, "Controller restart FAILED\n");
4284         else
4285                 b43info(wl, "Controller restarted\n");
4286 }
4287
4288 static int b43_setup_bands(struct b43_wldev *dev,
4289                            bool have_2ghz_phy, bool have_5ghz_phy)
4290 {
4291         struct ieee80211_hw *hw = dev->wl->hw;
4292
4293         if (have_2ghz_phy)
4294                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz;
4295         if (dev->phy.type == B43_PHYTYPE_N) {
4296                 if (have_5ghz_phy)
4297                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy;
4298         } else {
4299                 if (have_5ghz_phy)
4300                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy;
4301         }
4302
4303         dev->phy.supports_2ghz = have_2ghz_phy;
4304         dev->phy.supports_5ghz = have_5ghz_phy;
4305
4306         return 0;
4307 }
4308
4309 static void b43_wireless_core_detach(struct b43_wldev *dev)
4310 {
4311         /* We release firmware that late to not be required to re-request
4312          * is all the time when we reinit the core. */
4313         b43_release_firmware(dev);
4314 }
4315
4316 static int b43_wireless_core_attach(struct b43_wldev *dev)
4317 {
4318         struct b43_wl *wl = dev->wl;
4319         struct ssb_bus *bus = dev->dev->bus;
4320         struct pci_dev *pdev = bus->host_pci;
4321         int err;
4322         bool have_2ghz_phy = 0, have_5ghz_phy = 0;
4323         u32 tmp;
4324
4325         /* Do NOT do any device initialization here.
4326          * Do it in wireless_core_init() instead.
4327          * This function is for gathering basic information about the HW, only.
4328          * Also some structs may be set up here. But most likely you want to have
4329          * that in core_init(), too.
4330          */
4331
4332         err = ssb_bus_powerup(bus, 0);
4333         if (err) {
4334                 b43err(wl, "Bus powerup failed\n");
4335                 goto out;
4336         }
4337         /* Get the PHY type. */
4338         if (dev->dev->id.revision >= 5) {
4339                 u32 tmshigh;
4340
4341                 tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
4342                 have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY);
4343                 have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY);
4344         } else
4345                 B43_WARN_ON(1);
4346
4347         dev->phy.gmode = have_2ghz_phy;
4348         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
4349         b43_wireless_core_reset(dev, tmp);
4350
4351         err = b43_phy_versioning(dev);
4352         if (err)
4353                 goto err_powerdown;
4354         /* Check if this device supports multiband. */
4355         if (!pdev ||
4356             (pdev->device != 0x4312 &&
4357              pdev->device != 0x4319 && pdev->device != 0x4324)) {
4358                 /* No multiband support. */
4359                 have_2ghz_phy = 0;
4360                 have_5ghz_phy = 0;
4361                 switch (dev->phy.type) {
4362                 case B43_PHYTYPE_A:
4363                         have_5ghz_phy = 1;
4364                         break;
4365                 case B43_PHYTYPE_G:
4366                 case B43_PHYTYPE_N:
4367                         have_2ghz_phy = 1;
4368                         break;
4369                 default:
4370                         B43_WARN_ON(1);
4371                 }
4372         }
4373         if (dev->phy.type == B43_PHYTYPE_A) {
4374                 /* FIXME */
4375                 b43err(wl, "IEEE 802.11a devices are unsupported\n");
4376                 err = -EOPNOTSUPP;
4377                 goto err_powerdown;
4378         }
4379         if (1 /* disable A-PHY */) {
4380                 /* FIXME: For now we disable the A-PHY on multi-PHY devices. */
4381                 if (dev->phy.type != B43_PHYTYPE_N) {
4382                         have_2ghz_phy = 1;
4383                         have_5ghz_phy = 0;
4384                 }
4385         }
4386
4387         dev->phy.gmode = have_2ghz_phy;
4388         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
4389         b43_wireless_core_reset(dev, tmp);
4390
4391         err = b43_validate_chipaccess(dev);
4392         if (err)
4393                 goto err_powerdown;
4394         err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy);
4395         if (err)
4396                 goto err_powerdown;
4397
4398         /* Now set some default "current_dev" */
4399         if (!wl->current_dev)
4400                 wl->current_dev = dev;
4401         INIT_WORK(&dev->restart_work, b43_chip_reset);
4402
4403         b43_radio_turn_off(dev, 1);
4404         b43_switch_analog(dev, 0);
4405         ssb_device_disable(dev->dev, 0);
4406         ssb_bus_may_powerdown(bus);
4407
4408 out:
4409         return err;
4410
4411 err_powerdown:
4412         ssb_bus_may_powerdown(bus);
4413         return err;
4414 }
4415
4416 static void b43_one_core_detach(struct ssb_device *dev)
4417 {
4418         struct b43_wldev *wldev;
4419         struct b43_wl *wl;
4420
4421         /* Do not cancel ieee80211-workqueue based work here.
4422          * See comment in b43_remove(). */
4423
4424         wldev = ssb_get_drvdata(dev);
4425         wl = wldev->wl;
4426         b43_debugfs_remove_device(wldev);
4427         b43_wireless_core_detach(wldev);
4428         list_del(&wldev->list);
4429         wl->nr_devs--;
4430         ssb_set_drvdata(dev, NULL);
4431         kfree(wldev);
4432 }
4433
4434 static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
4435 {
4436         struct b43_wldev *wldev;
4437         struct pci_dev *pdev;
4438         int err = -ENOMEM;
4439
4440         if (!list_empty(&wl->devlist)) {
4441                 /* We are not the first core on this chip. */
4442                 pdev = dev->bus->host_pci;
4443                 /* Only special chips support more than one wireless
4444                  * core, although some of the other chips have more than
4445                  * one wireless core as well. Check for this and
4446                  * bail out early.
4447                  */
4448                 if (!pdev ||
4449                     ((pdev->device != 0x4321) &&
4450                      (pdev->device != 0x4313) && (pdev->device != 0x431A))) {
4451                         b43dbg(wl, "Ignoring unconnected 802.11 core\n");
4452                         return -ENODEV;
4453                 }
4454         }
4455
4456         wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
4457         if (!wldev)
4458                 goto out;
4459
4460         wldev->dev = dev;
4461         wldev->wl = wl;
4462         b43_set_status(wldev, B43_STAT_UNINIT);
4463         wldev->bad_frames_preempt = modparam_bad_frames_preempt;
4464         tasklet_init(&wldev->isr_tasklet,
4465                      (void (*)(unsigned long))b43_interrupt_tasklet,
4466                      (unsigned long)wldev);
4467         INIT_LIST_HEAD(&wldev->list);
4468
4469         err = b43_wireless_core_attach(wldev);
4470         if (err)
4471                 goto err_kfree_wldev;
4472
4473         list_add(&wldev->list, &wl->devlist);
4474         wl->nr_devs++;
4475         ssb_set_drvdata(dev, wldev);
4476         b43_debugfs_add_device(wldev);
4477
4478       out:
4479         return err;
4480
4481       err_kfree_wldev:
4482         kfree(wldev);
4483         return err;
4484 }
4485
4486 #define IS_PDEV(pdev, _vendor, _device, _subvendor, _subdevice)         ( \
4487         (pdev->vendor == PCI_VENDOR_ID_##_vendor) &&                    \
4488         (pdev->device == _device) &&                                    \
4489         (pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) &&       \
4490         (pdev->subsystem_device == _subdevice)                          )
4491
4492 static void b43_sprom_fixup(struct ssb_bus *bus)
4493 {
4494         struct pci_dev *pdev;
4495
4496         /* boardflags workarounds */
4497         if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
4498             bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
4499                 bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
4500         if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
4501             bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
4502                 bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
4503         if (bus->bustype == SSB_BUSTYPE_PCI) {
4504                 pdev = bus->host_pci;
4505                 if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
4506                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
4507                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
4508                         bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
4509         }
4510 }
4511
4512 static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
4513 {
4514         struct ieee80211_hw *hw = wl->hw;
4515
4516         ssb_set_devtypedata(dev, NULL);
4517         ieee80211_free_hw(hw);
4518 }
4519
4520 static int b43_wireless_init(struct ssb_device *dev)
4521 {
4522         struct ssb_sprom *sprom = &dev->bus->sprom;
4523         struct ieee80211_hw *hw;
4524         struct b43_wl *wl;
4525         int err = -ENOMEM;
4526
4527         b43_sprom_fixup(dev->bus);
4528
4529         hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops);
4530         if (!hw) {
4531                 b43err(NULL, "Could not allocate ieee80211 device\n");
4532                 goto out;
4533         }
4534
4535         /* fill hw info */
4536         hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
4537                     IEEE80211_HW_RX_INCLUDES_FCS;
4538         hw->max_signal = 100;
4539         hw->max_rssi = -110;
4540         hw->max_noise = -110;
4541         hw->queues = b43_modparam_qos ? 4 : 1;
4542         SET_IEEE80211_DEV(hw, dev->dev);
4543         if (is_valid_ether_addr(sprom->et1mac))
4544                 SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
4545         else
4546                 SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
4547
4548         /* Get and initialize struct b43_wl */
4549         wl = hw_to_b43_wl(hw);
4550         memset(wl, 0, sizeof(*wl));
4551         wl->hw = hw;
4552         spin_lock_init(&wl->irq_lock);
4553         rwlock_init(&wl->tx_lock);
4554         spin_lock_init(&wl->leds_lock);
4555         spin_lock_init(&wl->shm_lock);
4556         mutex_init(&wl->mutex);
4557         INIT_LIST_HEAD(&wl->devlist);
4558         INIT_WORK(&wl->qos_update_work, b43_qos_update_work);
4559         INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
4560
4561         ssb_set_devtypedata(dev, wl);
4562         b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
4563         err = 0;
4564       out:
4565         return err;
4566 }
4567
4568 static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
4569 {
4570         struct b43_wl *wl;
4571         int err;
4572         int first = 0;
4573
4574         wl = ssb_get_devtypedata(dev);
4575         if (!wl) {
4576                 /* Probing the first core. Must setup common struct b43_wl */
4577                 first = 1;
4578                 err = b43_wireless_init(dev);
4579                 if (err)
4580                         goto out;
4581                 wl = ssb_get_devtypedata(dev);
4582                 B43_WARN_ON(!wl);
4583         }
4584         err = b43_one_core_attach(dev, wl);
4585         if (err)
4586                 goto err_wireless_exit;
4587
4588         if (first) {
4589                 err = ieee80211_register_hw(wl->hw);
4590                 if (err)
4591                         goto err_one_core_detach;
4592         }
4593
4594       out:
4595         return err;
4596
4597       err_one_core_detach:
4598         b43_one_core_detach(dev);
4599       err_wireless_exit:
4600         if (first)
4601                 b43_wireless_exit(dev, wl);
4602         return err;
4603 }
4604
4605 static void b43_remove(struct ssb_device *dev)
4606 {
4607         struct b43_wl *wl = ssb_get_devtypedata(dev);
4608         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4609
4610         /* We must cancel any work here before unregistering from ieee80211,
4611          * as the ieee80211 unreg will destroy the workqueue. */
4612         cancel_work_sync(&wldev->restart_work);
4613
4614         B43_WARN_ON(!wl);
4615         if (wl->current_dev == wldev)
4616                 ieee80211_unregister_hw(wl->hw);
4617
4618         b43_one_core_detach(dev);
4619
4620         if (list_empty(&wl->devlist)) {
4621                 /* Last core on the chip unregistered.
4622                  * We can destroy common struct b43_wl.
4623                  */
4624                 b43_wireless_exit(dev, wl);
4625         }
4626 }
4627
4628 /* Perform a hardware reset. This can be called from any context. */
4629 void b43_controller_restart(struct b43_wldev *dev, const char *reason)
4630 {
4631         /* Must avoid requeueing, if we are in shutdown. */
4632         if (b43_status(dev) < B43_STAT_INITIALIZED)
4633                 return;
4634         b43info(dev->wl, "Controller RESET (%s) ...\n", reason);
4635         queue_work(dev->wl->hw->workqueue, &dev->restart_work);
4636 }
4637
4638 #ifdef CONFIG_PM
4639
4640 static int b43_suspend(struct ssb_device *dev, pm_message_t state)
4641 {
4642         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4643         struct b43_wl *wl = wldev->wl;
4644
4645         b43dbg(wl, "Suspending...\n");
4646
4647         mutex_lock(&wl->mutex);
4648         wldev->suspend_in_progress = true;
4649         wldev->suspend_init_status = b43_status(wldev);
4650         if (wldev->suspend_init_status >= B43_STAT_STARTED)
4651                 b43_wireless_core_stop(wldev);
4652         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED)
4653                 b43_wireless_core_exit(wldev);
4654         mutex_unlock(&wl->mutex);
4655
4656         b43dbg(wl, "Device suspended.\n");
4657
4658         return 0;
4659 }
4660
4661 static int b43_resume(struct ssb_device *dev)
4662 {
4663         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4664         struct b43_wl *wl = wldev->wl;
4665         int err = 0;
4666
4667         b43dbg(wl, "Resuming...\n");
4668
4669         mutex_lock(&wl->mutex);
4670         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) {
4671                 err = b43_wireless_core_init(wldev);
4672                 if (err) {
4673                         b43err(wl, "Resume failed at core init\n");
4674                         goto out;
4675                 }
4676         }
4677         if (wldev->suspend_init_status >= B43_STAT_STARTED) {
4678                 err = b43_wireless_core_start(wldev);
4679                 if (err) {
4680                         b43_leds_exit(wldev);
4681                         b43_rng_exit(wldev->wl);
4682                         b43_wireless_core_exit(wldev);
4683                         b43err(wl, "Resume failed at core start\n");
4684                         goto out;
4685                 }
4686         }
4687         b43dbg(wl, "Device resumed.\n");
4688  out:
4689         wldev->suspend_in_progress = false;
4690         mutex_unlock(&wl->mutex);
4691         return err;
4692 }
4693
4694 #else /* CONFIG_PM */
4695 # define b43_suspend    NULL
4696 # define b43_resume     NULL
4697 #endif /* CONFIG_PM */
4698
4699 static struct ssb_driver b43_ssb_driver = {
4700         .name           = KBUILD_MODNAME,
4701         .id_table       = b43_ssb_tbl,
4702         .probe          = b43_probe,
4703         .remove         = b43_remove,
4704         .suspend        = b43_suspend,
4705         .resume         = b43_resume,
4706 };
4707
4708 static void b43_print_driverinfo(void)
4709 {
4710         const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
4711                    *feat_leds = "", *feat_rfkill = "";
4712
4713 #ifdef CONFIG_B43_PCI_AUTOSELECT
4714         feat_pci = "P";
4715 #endif
4716 #ifdef CONFIG_B43_PCMCIA
4717         feat_pcmcia = "M";
4718 #endif
4719 #ifdef CONFIG_B43_NPHY
4720         feat_nphy = "N";
4721 #endif
4722 #ifdef CONFIG_B43_LEDS
4723         feat_leds = "L";
4724 #endif
4725 #ifdef CONFIG_B43_RFKILL
4726         feat_rfkill = "R";
4727 #endif
4728         printk(KERN_INFO "Broadcom 43xx driver loaded "
4729                "[ Features: %s%s%s%s%s, Firmware-ID: "
4730                B43_SUPPORTED_FIRMWARE_ID " ]\n",
4731                feat_pci, feat_pcmcia, feat_nphy,
4732                feat_leds, feat_rfkill);
4733 }
4734
4735 static int __init b43_init(void)
4736 {
4737         int err;
4738
4739         b43_debugfs_init();
4740         err = b43_pcmcia_init();
4741         if (err)
4742                 goto err_dfs_exit;
4743         err = ssb_driver_register(&b43_ssb_driver);
4744         if (err)
4745                 goto err_pcmcia_exit;
4746         b43_print_driverinfo();
4747
4748         return err;
4749
4750 err_pcmcia_exit:
4751         b43_pcmcia_exit();
4752 err_dfs_exit:
4753         b43_debugfs_exit();
4754         return err;
4755 }
4756
4757 static void __exit b43_exit(void)
4758 {
4759         ssb_driver_unregister(&b43_ssb_driver);
4760         b43_pcmcia_exit();
4761         b43_debugfs_exit();
4762 }
4763
4764 module_init(b43_init)
4765 module_exit(b43_exit)