[PATCH] remove unused tmp_buf_sem's
[linux-2.6] / drivers / usb / serial / pl2303.c
1 /*
2  * Prolific PL2303 USB to serial adaptor driver
3  *
4  * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
5  * Copyright (C) 2003 IBM Corp.
6  *
7  * Original driver for 2.2.x by anonymous
8  *
9  *      This program is free software; you can redistribute it and/or modify
10  *      it under the terms of the GNU General Public License as published by
11  *      the Free Software Foundation; either version 2 of the License.
12  *
13  * See Documentation/usb/usb-serial.txt for more information on using this driver
14  *
15  */
16
17 #include <linux/config.h>
18 #include <linux/kernel.h>
19 #include <linux/errno.h>
20 #include <linux/init.h>
21 #include <linux/slab.h>
22 #include <linux/tty.h>
23 #include <linux/tty_driver.h>
24 #include <linux/tty_flip.h>
25 #include <linux/serial.h>
26 #include <linux/module.h>
27 #include <linux/moduleparam.h>
28 #include <linux/spinlock.h>
29 #include <asm/uaccess.h>
30 #include <linux/usb.h>
31 #include "usb-serial.h"
32 #include "pl2303.h"
33
34 /*
35  * Version Information
36  */
37 #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
38
39 static int debug;
40
41 #define PL2303_CLOSING_WAIT     (30*HZ)
42
43 #define PL2303_BUF_SIZE         1024
44 #define PL2303_TMP_BUF_SIZE     1024
45
46 struct pl2303_buf {
47         unsigned int    buf_size;
48         char            *buf_buf;
49         char            *buf_get;
50         char            *buf_put;
51 };
52
53 static struct usb_device_id id_table [] = {
54         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
55         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
56         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
57         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
58         { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
59         { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
60         { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
61         { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
62         { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
63         { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
64         { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
65         { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
66         { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
67         { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
68         { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
69         { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
70         { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
71         { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
72         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
73         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
74         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
75         { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
76         { USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
77         { }                                     /* Terminating entry */
78 };
79
80 MODULE_DEVICE_TABLE (usb, id_table);
81
82 static struct usb_driver pl2303_driver = {
83         .name =         "pl2303",
84         .probe =        usb_serial_probe,
85         .disconnect =   usb_serial_disconnect,
86         .id_table =     id_table,
87         .no_dynamic_id =        1,
88 };
89
90 #define SET_LINE_REQUEST_TYPE           0x21
91 #define SET_LINE_REQUEST                0x20
92
93 #define SET_CONTROL_REQUEST_TYPE        0x21
94 #define SET_CONTROL_REQUEST             0x22
95 #define CONTROL_DTR                     0x01
96 #define CONTROL_RTS                     0x02
97
98 #define BREAK_REQUEST_TYPE              0x21
99 #define BREAK_REQUEST                   0x23    
100 #define BREAK_ON                        0xffff
101 #define BREAK_OFF                       0x0000
102
103 #define GET_LINE_REQUEST_TYPE           0xa1
104 #define GET_LINE_REQUEST                0x21
105
106 #define VENDOR_WRITE_REQUEST_TYPE       0x40
107 #define VENDOR_WRITE_REQUEST            0x01
108
109 #define VENDOR_READ_REQUEST_TYPE        0xc0
110 #define VENDOR_READ_REQUEST             0x01
111
112 #define UART_STATE                      0x08
113 #define UART_STATE_TRANSIENT_MASK       0x74
114 #define UART_DCD                        0x01
115 #define UART_DSR                        0x02
116 #define UART_BREAK_ERROR                0x04
117 #define UART_RING                       0x08
118 #define UART_FRAME_ERROR                0x10
119 #define UART_PARITY_ERROR               0x20
120 #define UART_OVERRUN_ERROR              0x40
121 #define UART_CTS                        0x80
122
123 /* function prototypes for a PL2303 serial converter */
124 static int pl2303_open (struct usb_serial_port *port, struct file *filp);
125 static void pl2303_close (struct usb_serial_port *port, struct file *filp);
126 static void pl2303_set_termios (struct usb_serial_port *port,
127                                 struct termios *old);
128 static int pl2303_ioctl (struct usb_serial_port *port, struct file *file,
129                          unsigned int cmd, unsigned long arg);
130 static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs);
131 static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
132 static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
133 static int pl2303_write (struct usb_serial_port *port,
134                          const unsigned char *buf, int count);
135 static void pl2303_send (struct usb_serial_port *port);
136 static int pl2303_write_room(struct usb_serial_port *port);
137 static int pl2303_chars_in_buffer(struct usb_serial_port *port);
138 static void pl2303_break_ctl(struct usb_serial_port *port,int break_state);
139 static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file);
140 static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file,
141                             unsigned int set, unsigned int clear);
142 static int pl2303_startup (struct usb_serial *serial);
143 static void pl2303_shutdown (struct usb_serial *serial);
144 static struct pl2303_buf *pl2303_buf_alloc(unsigned int size);
145 static void pl2303_buf_free(struct pl2303_buf *pb);
146 static void pl2303_buf_clear(struct pl2303_buf *pb);
147 static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb);
148 static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb);
149 static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
150         unsigned int count);
151 static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
152         unsigned int count);
153
154
155 /* All of the device info needed for the PL2303 SIO serial converter */
156 static struct usb_serial_driver pl2303_device = {
157         .driver = {
158                 .owner =        THIS_MODULE,
159                 .name =         "pl2303",
160         },
161         .id_table =             id_table,
162         .num_interrupt_in =     NUM_DONT_CARE,
163         .num_bulk_in =          1,
164         .num_bulk_out =         1,
165         .num_ports =            1,
166         .open =                 pl2303_open,
167         .close =                pl2303_close,
168         .write =                pl2303_write,
169         .ioctl =                pl2303_ioctl,
170         .break_ctl =            pl2303_break_ctl,
171         .set_termios =          pl2303_set_termios,
172         .tiocmget =             pl2303_tiocmget,
173         .tiocmset =             pl2303_tiocmset,
174         .read_bulk_callback =   pl2303_read_bulk_callback,
175         .read_int_callback =    pl2303_read_int_callback,
176         .write_bulk_callback =  pl2303_write_bulk_callback,
177         .write_room =           pl2303_write_room,
178         .chars_in_buffer =      pl2303_chars_in_buffer,
179         .attach =               pl2303_startup,
180         .shutdown =             pl2303_shutdown,
181 };
182
183 enum pl2303_type {
184         type_0,         /* don't know the difference between type 0 and */
185         type_1,         /* type 1, until someone from prolific tells us... */
186         HX,             /* HX version of the pl2303 chip */
187 };
188
189 struct pl2303_private {
190         spinlock_t lock;
191         struct pl2303_buf *buf;
192         int write_urb_in_use;
193         wait_queue_head_t delta_msr_wait;
194         u8 line_control;
195         u8 line_status;
196         u8 termios_initialized;
197         enum pl2303_type type;
198 };
199
200
201 static int pl2303_startup (struct usb_serial *serial)
202 {
203         struct pl2303_private *priv;
204         enum pl2303_type type = type_0;
205         int i;
206
207         if (serial->dev->descriptor.bDeviceClass == 0x02)
208                 type = type_0;
209         else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
210                 type = HX;
211         else if (serial->dev->descriptor.bDeviceClass == 0x00)
212                 type = type_1;
213         else if (serial->dev->descriptor.bDeviceClass == 0xFF)
214                 type = type_1;
215         dbg("device type: %d", type);
216
217         for (i = 0; i < serial->num_ports; ++i) {
218                 priv = kmalloc (sizeof (struct pl2303_private), GFP_KERNEL);
219                 if (!priv)
220                         goto cleanup;
221                 memset (priv, 0x00, sizeof (struct pl2303_private));
222                 spin_lock_init(&priv->lock);
223                 priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE);
224                 if (priv->buf == NULL) {
225                         kfree(priv);
226                         goto cleanup;
227                 }
228                 init_waitqueue_head(&priv->delta_msr_wait);
229                 priv->type = type;
230                 usb_set_serial_port_data(serial->port[i], priv);
231         }
232         return 0;
233
234 cleanup:
235         for (--i; i>=0; --i) {
236                 priv = usb_get_serial_port_data(serial->port[i]);
237                 pl2303_buf_free(priv->buf);
238                 kfree(priv);
239                 usb_set_serial_port_data(serial->port[i], NULL);
240         }
241         return -ENOMEM;
242 }
243
244 static int set_control_lines (struct usb_device *dev, u8 value)
245 {
246         int retval;
247         
248         retval = usb_control_msg (dev, usb_sndctrlpipe (dev, 0),
249                                   SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
250                                   value, 0, NULL, 0, 100);
251         dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval);
252         return retval;
253 }
254
255 static int pl2303_write (struct usb_serial_port *port,  const unsigned char *buf, int count)
256 {
257         struct pl2303_private *priv = usb_get_serial_port_data(port);
258         unsigned long flags;
259
260         dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
261
262         if (!count)
263                 return count;
264
265         spin_lock_irqsave(&priv->lock, flags);
266         count = pl2303_buf_put(priv->buf, buf, count);
267         spin_unlock_irqrestore(&priv->lock, flags);
268
269         pl2303_send(port);
270
271         return count;
272 }
273
274 static void pl2303_send(struct usb_serial_port *port)
275 {
276         int count, result;
277         struct pl2303_private *priv = usb_get_serial_port_data(port);
278         unsigned long flags;
279
280         dbg("%s - port %d", __FUNCTION__, port->number);
281
282         spin_lock_irqsave(&priv->lock, flags);
283
284         if (priv->write_urb_in_use) {
285                 spin_unlock_irqrestore(&priv->lock, flags);
286                 return;
287         }
288
289         count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer,
290                 port->bulk_out_size);
291
292         if (count == 0) {
293                 spin_unlock_irqrestore(&priv->lock, flags);
294                 return;
295         }
296
297         priv->write_urb_in_use = 1;
298
299         spin_unlock_irqrestore(&priv->lock, flags);
300
301         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
302
303         port->write_urb->transfer_buffer_length = count;
304         port->write_urb->dev = port->serial->dev;
305         result = usb_submit_urb (port->write_urb, GFP_ATOMIC);
306         if (result) {
307                 dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
308                 priv->write_urb_in_use = 0;
309                 // TODO: reschedule pl2303_send
310         }
311
312         schedule_work(&port->work);
313 }
314
315 static int pl2303_write_room(struct usb_serial_port *port)
316 {
317         struct pl2303_private *priv = usb_get_serial_port_data(port);
318         int room = 0;
319         unsigned long flags;
320
321         dbg("%s - port %d", __FUNCTION__, port->number);
322
323         spin_lock_irqsave(&priv->lock, flags);
324         room = pl2303_buf_space_avail(priv->buf);
325         spin_unlock_irqrestore(&priv->lock, flags);
326
327         dbg("%s - returns %d", __FUNCTION__, room);
328         return room;
329 }
330
331 static int pl2303_chars_in_buffer(struct usb_serial_port *port)
332 {
333         struct pl2303_private *priv = usb_get_serial_port_data(port);
334         int chars = 0;
335         unsigned long flags;
336
337         dbg("%s - port %d", __FUNCTION__, port->number);
338
339         spin_lock_irqsave(&priv->lock, flags);
340         chars = pl2303_buf_data_avail(priv->buf);
341         spin_unlock_irqrestore(&priv->lock, flags);
342
343         dbg("%s - returns %d", __FUNCTION__, chars);
344         return chars;
345 }
346
347 static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios)
348 {
349         struct usb_serial *serial = port->serial;
350         struct pl2303_private *priv = usb_get_serial_port_data(port);
351         unsigned long flags;
352         unsigned int cflag;
353         unsigned char *buf;
354         int baud;
355         int i;
356         u8 control;
357
358         dbg("%s -  port %d", __FUNCTION__, port->number);
359
360         if ((!port->tty) || (!port->tty->termios)) {
361                 dbg("%s - no tty structures", __FUNCTION__);
362                 return;
363         }
364
365         spin_lock_irqsave(&priv->lock, flags);
366         if (!priv->termios_initialized) {
367                 *(port->tty->termios) = tty_std_termios;
368                 port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
369                 priv->termios_initialized = 1;
370         }
371         spin_unlock_irqrestore(&priv->lock, flags);
372
373         cflag = port->tty->termios->c_cflag;
374         /* check that they really want us to change something */
375         if (old_termios) {
376                 if ((cflag == old_termios->c_cflag) &&
377                     (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) {
378                     dbg("%s - nothing to change...", __FUNCTION__);
379                     return;
380                 }
381         }
382
383         buf = kmalloc (7, GFP_KERNEL);
384         if (!buf) {
385                 dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
386                 return;
387         }
388         memset (buf, 0x00, 0x07);
389         
390         i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
391                              GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
392                              0, 0, buf, 7, 100);
393         dbg ("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
394              buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
395
396
397         if (cflag & CSIZE) {
398                 switch (cflag & CSIZE) {
399                         case CS5:       buf[6] = 5;     break;
400                         case CS6:       buf[6] = 6;     break;
401                         case CS7:       buf[6] = 7;     break;
402                         default:
403                         case CS8:       buf[6] = 8;     break;
404                 }
405                 dbg("%s - data bits = %d", __FUNCTION__, buf[6]);
406         }
407
408         baud = 0;
409         switch (cflag & CBAUD) {
410                 case B0:        baud = 0;       break;
411                 case B75:       baud = 75;      break;
412                 case B150:      baud = 150;     break;
413                 case B300:      baud = 300;     break;
414                 case B600:      baud = 600;     break;
415                 case B1200:     baud = 1200;    break;
416                 case B1800:     baud = 1800;    break;
417                 case B2400:     baud = 2400;    break;
418                 case B4800:     baud = 4800;    break;
419                 case B9600:     baud = 9600;    break;
420                 case B19200:    baud = 19200;   break;
421                 case B38400:    baud = 38400;   break;
422                 case B57600:    baud = 57600;   break;
423                 case B115200:   baud = 115200;  break;
424                 case B230400:   baud = 230400;  break;
425                 case B460800:   baud = 460800;  break;
426                 default:
427                         dev_err(&port->dev, "pl2303 driver does not support the baudrate requested (fix it)\n");
428                         break;
429         }
430         dbg("%s - baud = %d", __FUNCTION__, baud);
431         if (baud) {
432                 buf[0] = baud & 0xff;
433                 buf[1] = (baud >> 8) & 0xff;
434                 buf[2] = (baud >> 16) & 0xff;
435                 buf[3] = (baud >> 24) & 0xff;
436         }
437
438         /* For reference buf[4]=0 is 1 stop bits */
439         /* For reference buf[4]=1 is 1.5 stop bits */
440         /* For reference buf[4]=2 is 2 stop bits */
441         if (cflag & CSTOPB) {
442                 buf[4] = 2;
443                 dbg("%s - stop bits = 2", __FUNCTION__);
444         } else {
445                 buf[4] = 0;
446                 dbg("%s - stop bits = 1", __FUNCTION__);
447         }
448
449         if (cflag & PARENB) {
450                 /* For reference buf[5]=0 is none parity */
451                 /* For reference buf[5]=1 is odd parity */
452                 /* For reference buf[5]=2 is even parity */
453                 /* For reference buf[5]=3 is mark parity */
454                 /* For reference buf[5]=4 is space parity */
455                 if (cflag & PARODD) {
456                         buf[5] = 1;
457                         dbg("%s - parity = odd", __FUNCTION__);
458                 } else {
459                         buf[5] = 2;
460                         dbg("%s - parity = even", __FUNCTION__);
461                 }
462         } else {
463                 buf[5] = 0;
464                 dbg("%s - parity = none", __FUNCTION__);
465         }
466
467         i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
468                              SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, 
469                              0, 0, buf, 7, 100);
470         dbg ("0x21:0x20:0:0  %d", i);
471
472         /* change control lines if we are switching to or from B0 */
473         spin_lock_irqsave(&priv->lock, flags);
474         control = priv->line_control;
475         if ((cflag & CBAUD) == B0)
476                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
477         else
478                 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
479         if (control != priv->line_control) {
480                 control = priv->line_control;
481                 spin_unlock_irqrestore(&priv->lock, flags);
482                 set_control_lines(serial->dev, control);
483         } else {
484                 spin_unlock_irqrestore(&priv->lock, flags);
485         }
486         
487         buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0;
488
489         i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
490                              GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
491                              0, 0, buf, 7, 100);
492         dbg ("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
493              buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
494
495         if (cflag & CRTSCTS) {
496                 __u16 index;
497                 if (priv->type == HX)
498                         index = 0x61;
499                 else
500                         index = 0x41;
501                 i = usb_control_msg(serial->dev, 
502                                     usb_sndctrlpipe(serial->dev, 0),
503                                     VENDOR_WRITE_REQUEST,
504                                     VENDOR_WRITE_REQUEST_TYPE,
505                                     0x0, index, NULL, 0, 100);
506                 dbg ("0x40:0x1:0x0:0x%x  %d", index, i);
507         }
508
509         kfree (buf);
510 }
511
512 static int pl2303_open (struct usb_serial_port *port, struct file *filp)
513 {
514         struct termios tmp_termios;
515         struct usb_serial *serial = port->serial;
516         struct pl2303_private *priv = usb_get_serial_port_data(port);
517         unsigned char *buf;
518         int result;
519
520         dbg("%s -  port %d", __FUNCTION__, port->number);
521
522         if (priv->type != HX) {
523                 usb_clear_halt(serial->dev, port->write_urb->pipe);
524                 usb_clear_halt(serial->dev, port->read_urb->pipe);
525         }
526
527         buf = kmalloc(10, GFP_KERNEL);
528         if (buf==NULL)
529                 return -ENOMEM;
530
531 #define FISH(a,b,c,d)                                                           \
532         result=usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev,0),     \
533                                b, a, c, d, buf, 1, 100);                        \
534         dbg("0x%x:0x%x:0x%x:0x%x  %d - %x",a,b,c,d,result,buf[0]);
535
536 #define SOUP(a,b,c,d)                                                           \
537         result=usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev,0),     \
538                                b, a, c, d, NULL, 0, 100);                       \
539         dbg("0x%x:0x%x:0x%x:0x%x  %d",a,b,c,d,result);
540
541         FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
542         SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 0);
543         FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
544         FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
545         FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
546         SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 1);
547         FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
548         FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
549         SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0, 1);
550         SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 1, 0);
551
552         if (priv->type == HX) {
553                 /* HX chip */
554                 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x44);
555                 /* reset upstream data pipes */
556                 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 8, 0);
557                 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 9, 0);
558         } else {
559                 SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x24);
560         }
561
562         kfree(buf);
563
564         /* Setup termios */
565         if (port->tty) {
566                 pl2303_set_termios (port, &tmp_termios);
567         }
568
569         //FIXME: need to assert RTS and DTR if CRTSCTS off
570
571         dbg("%s - submitting read urb", __FUNCTION__);
572         port->read_urb->dev = serial->dev;
573         result = usb_submit_urb (port->read_urb, GFP_KERNEL);
574         if (result) {
575                 dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
576                 pl2303_close (port, NULL);
577                 return -EPROTO;
578         }
579
580         dbg("%s - submitting interrupt urb", __FUNCTION__);
581         port->interrupt_in_urb->dev = serial->dev;
582         result = usb_submit_urb (port->interrupt_in_urb, GFP_KERNEL);
583         if (result) {
584                 dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", __FUNCTION__, result);
585                 pl2303_close (port, NULL);
586                 return -EPROTO;
587         }
588         return 0;
589 }
590
591
592 static void pl2303_close (struct usb_serial_port *port, struct file *filp)
593 {
594         struct pl2303_private *priv = usb_get_serial_port_data(port);
595         unsigned long flags;
596         unsigned int c_cflag;
597         int bps;
598         long timeout;
599         wait_queue_t wait;                                              \
600
601         dbg("%s - port %d", __FUNCTION__, port->number);
602
603         /* wait for data to drain from the buffer */
604         spin_lock_irqsave(&priv->lock, flags);
605         timeout = PL2303_CLOSING_WAIT;
606         init_waitqueue_entry(&wait, current);
607         add_wait_queue(&port->tty->write_wait, &wait);
608         for (;;) {
609                 set_current_state(TASK_INTERRUPTIBLE);
610                 if (pl2303_buf_data_avail(priv->buf) == 0
611                 || timeout == 0 || signal_pending(current)
612                 || !usb_get_intfdata(port->serial->interface))  /* disconnect */
613                         break;
614                 spin_unlock_irqrestore(&priv->lock, flags);
615                 timeout = schedule_timeout(timeout);
616                 spin_lock_irqsave(&priv->lock, flags);
617         }
618         set_current_state(TASK_RUNNING);
619         remove_wait_queue(&port->tty->write_wait, &wait);
620         /* clear out any remaining data in the buffer */
621         pl2303_buf_clear(priv->buf);
622         spin_unlock_irqrestore(&priv->lock, flags);
623
624         /* wait for characters to drain from the device */
625         /* (this is long enough for the entire 256 byte */
626         /* pl2303 hardware buffer to drain with no flow */
627         /* control for data rates of 1200 bps or more, */
628         /* for lower rates we should really know how much */
629         /* data is in the buffer to compute a delay */
630         /* that is not unnecessarily long) */
631         bps = tty_get_baud_rate(port->tty);
632         if (bps > 1200)
633                 timeout = max((HZ*2560)/bps,HZ/10);
634         else
635                 timeout = 2*HZ;
636         schedule_timeout_interruptible(timeout);
637
638         /* shutdown our urbs */
639         dbg("%s - shutting down urbs", __FUNCTION__);
640         usb_kill_urb(port->write_urb);
641         usb_kill_urb(port->read_urb);
642         usb_kill_urb(port->interrupt_in_urb);
643
644         if (port->tty) {
645                 c_cflag = port->tty->termios->c_cflag;
646                 if (c_cflag & HUPCL) {
647                         /* drop DTR and RTS */
648                         spin_lock_irqsave(&priv->lock, flags);
649                         priv->line_control = 0;
650                         spin_unlock_irqrestore (&priv->lock, flags);
651                         set_control_lines (port->serial->dev, 0);
652                 }
653         }
654 }
655
656 static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file,
657                             unsigned int set, unsigned int clear)
658 {
659         struct pl2303_private *priv = usb_get_serial_port_data(port);
660         unsigned long flags;
661         u8 control;
662
663         if (!usb_get_intfdata(port->serial->interface))
664                 return -ENODEV;
665
666         spin_lock_irqsave (&priv->lock, flags);
667         if (set & TIOCM_RTS)
668                 priv->line_control |= CONTROL_RTS;
669         if (set & TIOCM_DTR)
670                 priv->line_control |= CONTROL_DTR;
671         if (clear & TIOCM_RTS)
672                 priv->line_control &= ~CONTROL_RTS;
673         if (clear & TIOCM_DTR)
674                 priv->line_control &= ~CONTROL_DTR;
675         control = priv->line_control;
676         spin_unlock_irqrestore (&priv->lock, flags);
677
678         return set_control_lines (port->serial->dev, control);
679 }
680
681 static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file)
682 {
683         struct pl2303_private *priv = usb_get_serial_port_data(port);
684         unsigned long flags;
685         unsigned int mcr;
686         unsigned int status;
687         unsigned int result;
688
689         dbg("%s (%d)", __FUNCTION__, port->number);
690
691         if (!usb_get_intfdata(port->serial->interface))
692                 return -ENODEV;
693
694         spin_lock_irqsave (&priv->lock, flags);
695         mcr = priv->line_control;
696         status = priv->line_status;
697         spin_unlock_irqrestore (&priv->lock, flags);
698
699         result = ((mcr & CONTROL_DTR)           ? TIOCM_DTR : 0)
700                   | ((mcr & CONTROL_RTS)        ? TIOCM_RTS : 0)
701                   | ((status & UART_CTS)        ? TIOCM_CTS : 0)
702                   | ((status & UART_DSR)        ? TIOCM_DSR : 0)
703                   | ((status & UART_RING)       ? TIOCM_RI  : 0)
704                   | ((status & UART_DCD)        ? TIOCM_CD  : 0);
705
706         dbg("%s - result = %x", __FUNCTION__, result);
707
708         return result;
709 }
710
711 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
712 {
713         struct pl2303_private *priv = usb_get_serial_port_data(port);
714         unsigned long flags;
715         unsigned int prevstatus;
716         unsigned int status;
717         unsigned int changed;
718
719         spin_lock_irqsave (&priv->lock, flags);
720         prevstatus = priv->line_status;
721         spin_unlock_irqrestore (&priv->lock, flags);
722
723         while (1) {
724                 interruptible_sleep_on(&priv->delta_msr_wait);
725                 /* see if a signal did it */
726                 if (signal_pending(current))
727                         return -ERESTARTSYS;
728                 
729                 spin_lock_irqsave (&priv->lock, flags);
730                 status = priv->line_status;
731                 spin_unlock_irqrestore (&priv->lock, flags);
732                 
733                 changed=prevstatus^status;
734                 
735                 if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
736                     ((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
737                     ((arg & TIOCM_CD)  && (changed & UART_DCD)) ||
738                     ((arg & TIOCM_CTS) && (changed & UART_CTS)) ) {
739                         return 0;
740                 }
741                 prevstatus = status;
742         }
743         /* NOTREACHED */
744         return 0;
745 }
746
747 static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
748 {
749         dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd);
750
751         switch (cmd) {
752                 case TIOCMIWAIT:
753                         dbg("%s (%d) TIOCMIWAIT", __FUNCTION__,  port->number);
754                         return wait_modem_info(port, arg);
755
756                 default:
757                         dbg("%s not supported = 0x%04x", __FUNCTION__, cmd);
758                         break;
759         }
760
761         return -ENOIOCTLCMD;
762 }
763
764 static void pl2303_break_ctl (struct usb_serial_port *port, int break_state)
765 {
766         struct usb_serial *serial = port->serial;
767         u16 state;
768         int result;
769
770         dbg("%s - port %d", __FUNCTION__, port->number);
771
772         if (break_state == 0)
773                 state = BREAK_OFF;
774         else
775                 state = BREAK_ON;
776         dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on");
777
778         result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
779                                   BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 
780                                   0, NULL, 0, 100);
781         if (result)
782                 dbg("%s - error sending break = %d", __FUNCTION__, result);
783 }
784
785
786 static void pl2303_shutdown (struct usb_serial *serial)
787 {
788         int i;
789         struct pl2303_private *priv;
790
791         dbg("%s", __FUNCTION__);
792
793         for (i = 0; i < serial->num_ports; ++i) {
794                 priv = usb_get_serial_port_data(serial->port[i]);
795                 if (priv) {
796                         pl2303_buf_free(priv->buf);
797                         kfree(priv);
798                         usb_set_serial_port_data(serial->port[i], NULL);
799                 }
800         }               
801 }
802
803 static void pl2303_update_line_status(struct usb_serial_port *port,
804                                       unsigned char *data,
805                                       unsigned int actual_length)
806 {
807
808         struct pl2303_private *priv = usb_get_serial_port_data(port);
809         unsigned long flags;
810         u8 status_idx = UART_STATE;
811         u8 length = UART_STATE + 1;
812
813         if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
814             (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 ||
815              le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_SX1 ||
816              le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X75)) {
817                 length = 1;
818                 status_idx = 0;
819         }
820
821         if (actual_length < length)
822                 goto exit;
823
824         /* Save off the uart status for others to look at */
825         spin_lock_irqsave(&priv->lock, flags);
826         priv->line_status = data[status_idx];
827         spin_unlock_irqrestore(&priv->lock, flags);
828
829 exit:
830         return;
831 }
832
833 static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs)
834 {
835         struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
836         unsigned char *data = urb->transfer_buffer;
837         unsigned int actual_length = urb->actual_length;
838         int status;
839
840         dbg("%s (%d)", __FUNCTION__, port->number);
841
842         switch (urb->status) {
843         case 0:
844                 /* success */
845                 break;
846         case -ECONNRESET:
847         case -ENOENT:
848         case -ESHUTDOWN:
849                 /* this urb is terminated, clean up */
850                 dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
851                 return;
852         default:
853                 dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
854                 goto exit;
855         }
856
857         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
858         pl2303_update_line_status(port, data, actual_length);
859
860 exit:
861         status = usb_submit_urb (urb, GFP_ATOMIC);
862         if (status)
863                 dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
864                         __FUNCTION__, status);
865 }
866
867
868 static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
869 {
870         struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
871         struct pl2303_private *priv = usb_get_serial_port_data(port);
872         struct tty_struct *tty;
873         unsigned char *data = urb->transfer_buffer;
874         unsigned long flags;
875         int i;
876         int result;
877         u8 status;
878         char tty_flag;
879
880         dbg("%s - port %d", __FUNCTION__, port->number);
881
882         if (urb->status) {
883                 dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
884                 if (!port->open_count) {
885                         dbg("%s - port is closed, exiting.", __FUNCTION__);
886                         return;
887                 }
888                 if (urb->status == -EPROTO) {
889                         /* PL2303 mysteriously fails with -EPROTO reschedule the read */
890                         dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__);
891                         urb->status = 0;
892                         urb->dev = port->serial->dev;
893                         result = usb_submit_urb(urb, GFP_ATOMIC);
894                         if (result)
895                                 dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
896                         return;
897                 }
898                 dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
899                 return;
900         }
901
902         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
903
904         /* get tty_flag from status */
905         tty_flag = TTY_NORMAL;
906
907         spin_lock_irqsave(&priv->lock, flags);
908         status = priv->line_status;
909         priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
910         spin_unlock_irqrestore(&priv->lock, flags);
911         wake_up_interruptible (&priv->delta_msr_wait);
912
913         /* break takes precedence over parity, */
914         /* which takes precedence over framing errors */
915         if (status & UART_BREAK_ERROR )
916                 tty_flag = TTY_BREAK;
917         else if (status & UART_PARITY_ERROR)
918                 tty_flag = TTY_PARITY;
919         else if (status & UART_FRAME_ERROR)
920                 tty_flag = TTY_FRAME;
921         dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag);
922
923         tty = port->tty;
924         if (tty && urb->actual_length) {
925                 tty_buffer_request_room(tty, urb->actual_length + 1);
926                 /* overrun is special, not associated with a char */
927                 if (status & UART_OVERRUN_ERROR)
928                         tty_insert_flip_char(tty, 0, TTY_OVERRUN);
929                 for (i = 0; i < urb->actual_length; ++i)
930                         tty_insert_flip_char (tty, data[i], tty_flag);
931                 tty_flip_buffer_push (tty);
932         }
933
934         /* Schedule the next read _if_ we are still open */
935         if (port->open_count) {
936                 urb->dev = port->serial->dev;
937                 result = usb_submit_urb(urb, GFP_ATOMIC);
938                 if (result)
939                         dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
940         }
941
942         return;
943 }
944
945
946
947 static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
948 {
949         struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
950         struct pl2303_private *priv = usb_get_serial_port_data(port);
951         int result;
952
953         dbg("%s - port %d", __FUNCTION__, port->number);
954
955         switch (urb->status) {
956         case 0:
957                 /* success */
958                 break;
959         case -ECONNRESET:
960         case -ENOENT:
961         case -ESHUTDOWN:
962                 /* this urb is terminated, clean up */
963                 dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
964                 priv->write_urb_in_use = 0;
965                 return;
966         default:
967                 /* error in the urb, so we have to resubmit it */
968                 dbg("%s - Overflow in write", __FUNCTION__);
969                 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
970                 port->write_urb->transfer_buffer_length = 1;
971                 port->write_urb->dev = port->serial->dev;
972                 result = usb_submit_urb (port->write_urb, GFP_ATOMIC);
973                 if (result)
974                         dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", __FUNCTION__, result);
975                 else
976                         return;
977         }
978
979         priv->write_urb_in_use = 0;
980
981         /* send any buffered data */
982         pl2303_send(port);
983 }
984
985
986 /*
987  * pl2303_buf_alloc
988  *
989  * Allocate a circular buffer and all associated memory.
990  */
991
992 static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
993 {
994
995         struct pl2303_buf *pb;
996
997
998         if (size == 0)
999                 return NULL;
1000
1001         pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
1002         if (pb == NULL)
1003                 return NULL;
1004
1005         pb->buf_buf = kmalloc(size, GFP_KERNEL);
1006         if (pb->buf_buf == NULL) {
1007                 kfree(pb);
1008                 return NULL;
1009         }
1010
1011         pb->buf_size = size;
1012         pb->buf_get = pb->buf_put = pb->buf_buf;
1013
1014         return pb;
1015
1016 }
1017
1018
1019 /*
1020  * pl2303_buf_free
1021  *
1022  * Free the buffer and all associated memory.
1023  */
1024
1025 static void pl2303_buf_free(struct pl2303_buf *pb)
1026 {
1027         if (pb) {
1028                 kfree(pb->buf_buf);
1029                 kfree(pb);
1030         }
1031 }
1032
1033
1034 /*
1035  * pl2303_buf_clear
1036  *
1037  * Clear out all data in the circular buffer.
1038  */
1039
1040 static void pl2303_buf_clear(struct pl2303_buf *pb)
1041 {
1042         if (pb != NULL)
1043                 pb->buf_get = pb->buf_put;
1044                 /* equivalent to a get of all data available */
1045 }
1046
1047
1048 /*
1049  * pl2303_buf_data_avail
1050  *
1051  * Return the number of bytes of data available in the circular
1052  * buffer.
1053  */
1054
1055 static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
1056 {
1057         if (pb != NULL)
1058                 return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
1059         else
1060                 return 0;
1061 }
1062
1063
1064 /*
1065  * pl2303_buf_space_avail
1066  *
1067  * Return the number of bytes of space available in the circular
1068  * buffer.
1069  */
1070
1071 static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
1072 {
1073         if (pb != NULL)
1074                 return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
1075         else
1076                 return 0;
1077 }
1078
1079
1080 /*
1081  * pl2303_buf_put
1082  *
1083  * Copy data data from a user buffer and put it into the circular buffer.
1084  * Restrict to the amount of space available.
1085  *
1086  * Return the number of bytes copied.
1087  */
1088
1089 static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
1090         unsigned int count)
1091 {
1092
1093         unsigned int len;
1094
1095
1096         if (pb == NULL)
1097                 return 0;
1098
1099         len  = pl2303_buf_space_avail(pb);
1100         if (count > len)
1101                 count = len;
1102
1103         if (count == 0)
1104                 return 0;
1105
1106         len = pb->buf_buf + pb->buf_size - pb->buf_put;
1107         if (count > len) {
1108                 memcpy(pb->buf_put, buf, len);
1109                 memcpy(pb->buf_buf, buf+len, count - len);
1110                 pb->buf_put = pb->buf_buf + count - len;
1111         } else {
1112                 memcpy(pb->buf_put, buf, count);
1113                 if (count < len)
1114                         pb->buf_put += count;
1115                 else /* count == len */
1116                         pb->buf_put = pb->buf_buf;
1117         }
1118
1119         return count;
1120
1121 }
1122
1123
1124 /*
1125  * pl2303_buf_get
1126  *
1127  * Get data from the circular buffer and copy to the given buffer.
1128  * Restrict to the amount of data available.
1129  *
1130  * Return the number of bytes copied.
1131  */
1132
1133 static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
1134         unsigned int count)
1135 {
1136
1137         unsigned int len;
1138
1139
1140         if (pb == NULL)
1141                 return 0;
1142
1143         len = pl2303_buf_data_avail(pb);
1144         if (count > len)
1145                 count = len;
1146
1147         if (count == 0)
1148                 return 0;
1149
1150         len = pb->buf_buf + pb->buf_size - pb->buf_get;
1151         if (count > len) {
1152                 memcpy(buf, pb->buf_get, len);
1153                 memcpy(buf+len, pb->buf_buf, count - len);
1154                 pb->buf_get = pb->buf_buf + count - len;
1155         } else {
1156                 memcpy(buf, pb->buf_get, count);
1157                 if (count < len)
1158                         pb->buf_get += count;
1159                 else /* count == len */
1160                         pb->buf_get = pb->buf_buf;
1161         }
1162
1163         return count;
1164
1165 }
1166
1167 static int __init pl2303_init (void)
1168 {
1169         int retval;
1170         retval = usb_serial_register(&pl2303_device);
1171         if (retval)
1172                 goto failed_usb_serial_register;
1173         retval = usb_register(&pl2303_driver);
1174         if (retval)
1175                 goto failed_usb_register;
1176         info(DRIVER_DESC);
1177         return 0;
1178 failed_usb_register:
1179         usb_serial_deregister(&pl2303_device);
1180 failed_usb_serial_register:
1181         return retval;
1182 }
1183
1184
1185 static void __exit pl2303_exit (void)
1186 {
1187         usb_deregister (&pl2303_driver);
1188         usb_serial_deregister (&pl2303_device);
1189 }
1190
1191
1192 module_init(pl2303_init);
1193 module_exit(pl2303_exit);
1194
1195 MODULE_DESCRIPTION(DRIVER_DESC);
1196 MODULE_LICENSE("GPL");
1197
1198 module_param(debug, bool, S_IRUGO | S_IWUSR);
1199 MODULE_PARM_DESC(debug, "Debug enabled or not");
1200