git.oblomov.eu Git - linux-2.6/blob - arch/x86/kernel/cpu/centaur.c

   1 #include <linux/kernel.h>
   2 #include <linux/init.h>
   3 #include <linux/bitops.h>
   4 #include <asm/processor.h>
   5 #include <asm/msr.h>
   6 #include <asm/e820.h>
   7 #include <asm/mtrr.h>
   8 #include "cpu.h"
   9
  10 #ifdef CONFIG_X86_OOSTORE
  11
  12 static u32 __cpuinit power2(u32 x)
  13 {
  14         u32 s=1;
  15         while(s<=x)
  16                 s<<=1;
  17         return s>>=1;
  18 }
  19
  20
  21 /*
  22  *      Set up an actual MCR
  23  */
  24
  25 static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key)
  26 {
  27         u32 lo, hi;
  28
  29         hi = base & ~0xFFF;
  30         lo = ~(size-1);         /* Size is a power of 2 so this makes a mask */
  31         lo &= ~0xFFF;           /* Remove the ctrl value bits */
  32         lo |= key;              /* Attribute we wish to set */
  33         wrmsr(reg+MSR_IDT_MCR0, lo, hi);
  34         mtrr_centaur_report_mcr(reg, lo, hi);   /* Tell the mtrr driver */
  35 }
  36
  37 /*
  38  *      Figure what we can cover with MCR's
  39  *
  40  *      Shortcut: We know you can't put 4Gig of RAM on a winchip
  41  */
  42
  43 static u32 __cpuinit ramtop(void)               /* 16388 */
  44 {
  45         int i;
  46         u32 top = 0;
  47         u32 clip = 0xFFFFFFFFUL;
  48
  49         for (i = 0; i < e820.nr_map; i++) {
  50                 unsigned long start, end;
  51
  52                 if (e820.map[i].addr > 0xFFFFFFFFUL)
  53                         continue;
  54                 /*
  55                  *      Don't MCR over reserved space. Ignore the ISA hole
  56                  *      we frob around that catastrophe already
  57                  */
  58
  59                 if (e820.map[i].type == E820_RESERVED)
  60                 {
  61                         if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
  62                                 clip = e820.map[i].addr;
  63                         continue;
  64                 }
  65                 start = e820.map[i].addr;
  66                 end = e820.map[i].addr + e820.map[i].size;
  67                 if (start >= end)
  68                         continue;
  69                 if (end > top)
  70                         top = end;
  71         }
  72         /* Everything below 'top' should be RAM except for the ISA hole.
  73            Because of the limited MCR's we want to map NV/ACPI into our
  74            MCR range for gunk in RAM
  75
  76            Clip might cause us to MCR insufficient RAM but that is an
  77            acceptable failure mode and should only bite obscure boxes with
  78            a VESA hole at 15Mb
  79
  80            The second case Clip sometimes kicks in is when the EBDA is marked
  81            as reserved. Again we fail safe with reasonable results
  82         */
  83
  84         if(top>clip)
  85                 top=clip;
  86
  87         return top;
  88 }
  89
  90 /*
  91  *      Compute a set of MCR's to give maximum coverage
  92  */
  93
  94 static int __cpuinit centaur_mcr_compute(int nr, int key)
  95 {
  96         u32 mem = ramtop();
  97         u32 root = power2(mem);
  98         u32 base = root;
  99         u32 top = root;
 100         u32 floor = 0;
 101         int ct = 0;
 102
 103         while(ct<nr)
 104         {
 105                 u32 fspace = 0;
 106
 107                 /*
 108                  *      Find the largest block we will fill going upwards
 109                  */
 110
 111                 u32 high = power2(mem-top);
 112
 113                 /*
 114                  *      Find the largest block we will fill going downwards
 115                  */
 116
 117                 u32 low = base/2;
 118
 119                 /*
 120                  *      Don't fill below 1Mb going downwards as there
 121                  *      is an ISA hole in the way.
 122                  */
 123
 124                 if(base <= 1024*1024)
 125                         low = 0;
 126
 127                 /*
 128                  *      See how much space we could cover by filling below
 129                  *      the ISA hole
 130                  */
 131
 132                 if(floor == 0)
 133                         fspace = 512*1024;
 134                 else if(floor ==512*1024)
 135                         fspace = 128*1024;
 136
 137                 /* And forget ROM space */
 138
 139                 /*
 140                  *      Now install the largest coverage we get
 141                  */
 142
 143                 if(fspace > high && fspace > low)
 144                 {
 145                         centaur_mcr_insert(ct, floor, fspace, key);
 146                         floor += fspace;
 147                 }
 148                 else if(high > low)
 149                 {
 150                         centaur_mcr_insert(ct, top, high, key);
 151                         top += high;
 152                 }
 153                 else if(low > 0)
 154                 {
 155                         base -= low;
 156                         centaur_mcr_insert(ct, base, low, key);
 157                 }
 158                 else break;
 159                 ct++;
 160         }
 161         /*
 162          *      We loaded ct values. We now need to set the mask. The caller
 163          *      must do this bit.
 164          */
 165
 166         return ct;
 167 }
 168
 169 static void __cpuinit centaur_create_optimal_mcr(void)
 170 {
 171         int i;
 172         /*
 173          *      Allocate up to 6 mcrs to mark as much of ram as possible
 174          *      as write combining and weak write ordered.
 175          *
 176          *      To experiment with: Linux never uses stack operations for
 177          *      mmio spaces so we could globally enable stack operation wc
 178          *
 179          *      Load the registers with type 31 - full write combining, all
 180          *      writes weakly ordered.
 181          */
 182         int used = centaur_mcr_compute(6, 31);
 183
 184         /*
 185          *      Wipe unused MCRs
 186          */
 187
 188         for(i=used;i<8;i++)
 189                 wrmsr(MSR_IDT_MCR0+i, 0, 0);
 190 }
 191
 192 static void __cpuinit winchip2_create_optimal_mcr(void)
 193 {
 194         u32 lo, hi;
 195         int i;
 196
 197         /*
 198          *      Allocate up to 6 mcrs to mark as much of ram as possible
 199          *      as write combining, weak store ordered.
 200          *
 201          *      Load the registers with type 25
 202          *              8       -       weak write ordering
 203          *              16      -       weak read ordering
 204          *              1       -       write combining
 205          */
 206
 207         int used = centaur_mcr_compute(6, 25);
 208
 209         /*
 210          *      Mark the registers we are using.
 211          */
 212
 213         rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
 214         for(i=0;i<used;i++)
 215                 lo|=1<<(9+i);
 216         wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
 217
 218         /*
 219          *      Wipe unused MCRs
 220          */
 221
 222         for(i=used;i<8;i++)
 223                 wrmsr(MSR_IDT_MCR0+i, 0, 0);
 224 }
 225
 226 /*
 227  *      Handle the MCR key on the Winchip 2.
 228  */
 229
 230 static void __cpuinit winchip2_unprotect_mcr(void)
 231 {
 232         u32 lo, hi;
 233         u32 key;
 234
 235         rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
 236         lo&=~0x1C0;     /* blank bits 8-6 */
 237         key = (lo>>17) & 7;
 238         lo |= key<<6;   /* replace with unlock key */
 239         wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
 240 }
 241
 242 static void __cpuinit winchip2_protect_mcr(void)
 243 {
 244         u32 lo, hi;
 245
 246         rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
 247         lo&=~0x1C0;     /* blank bits 8-6 */
 248         wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
 249 }
 250 #endif /* CONFIG_X86_OOSTORE */
 251
 252 #define ACE_PRESENT     (1 << 6)
 253 #define ACE_ENABLED     (1 << 7)
 254 #define ACE_FCR         (1 << 28)       /* MSR_VIA_FCR */
 255
 256 #define RNG_PRESENT     (1 << 2)
 257 #define RNG_ENABLED     (1 << 3)
 258 #define RNG_ENABLE      (1 << 6)        /* MSR_VIA_RNG */
 259
 260 static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 261 {
 262         u32  lo, hi;
 263
 264         /* Test for Centaur Extended Feature Flags presence */
 265         if (cpuid_eax(0xC0000000) >= 0xC0000001) {
 266                 u32 tmp = cpuid_edx(0xC0000001);
 267
 268                 /* enable ACE unit, if present and disabled */
 269                 if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) {
 270                         rdmsr (MSR_VIA_FCR, lo, hi);
 271                         lo |= ACE_FCR;          /* enable ACE unit */
 272                         wrmsr (MSR_VIA_FCR, lo, hi);
 273                         printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n");
 274                 }
 275
 276                 /* enable RNG unit, if present and disabled */
 277                 if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) {
 278                         rdmsr (MSR_VIA_RNG, lo, hi);
 279                         lo |= RNG_ENABLE;       /* enable RNG unit */
 280                         wrmsr (MSR_VIA_RNG, lo, hi);
 281                         printk(KERN_INFO "CPU: Enabled h/w RNG\n");
 282                 }
 283
 284                 /* store Centaur Extended Feature Flags as
 285                  * word 5 of the CPU capability bit array
 286                  */
 287                 c->x86_capability[5] = cpuid_edx(0xC0000001);
 288         }
 289
 290         /* Cyrix III family needs CX8 & PGE explicitly enabled. */
 291         if (c->x86_model >=6 && c->x86_model <= 9) {
 292                 rdmsr (MSR_VIA_FCR, lo, hi);
 293                 lo |= (1<<1 | 1<<7);
 294                 wrmsr (MSR_VIA_FCR, lo, hi);
 295                 set_bit(X86_FEATURE_CX8, c->x86_capability);
 296         }
 297
 298         /* Before Nehemiah, the C3's had 3dNOW! */
 299         if (c->x86_model >=6 && c->x86_model <9)
 300                 set_bit(X86_FEATURE_3DNOW, c->x86_capability);
 301
 302         get_model_name(c);
 303         display_cacheinfo(c);
 304 }
 305
 306 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 307 {
 308         enum {
 309                 ECX8=1<<1,
 310                 EIERRINT=1<<2,
 311                 DPM=1<<3,
 312                 DMCE=1<<4,
 313                 DSTPCLK=1<<5,
 314                 ELINEAR=1<<6,
 315                 DSMC=1<<7,
 316                 DTLOCK=1<<8,
 317                 EDCTLB=1<<8,
 318                 EMMX=1<<9,
 319                 DPDC=1<<11,
 320                 EBRPRED=1<<12,
 321                 DIC=1<<13,
 322                 DDC=1<<14,
 323                 DNA=1<<15,
 324                 ERETSTK=1<<16,
 325                 E2MMX=1<<19,
 326                 EAMD3D=1<<20,
 327         };
 328
 329         char *name;
 330         u32  fcr_set=0;
 331         u32  fcr_clr=0;
 332         u32  lo,hi,newlo;
 333         u32  aa,bb,cc,dd;
 334
 335         /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
 336            3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
 337         clear_bit(0*32+31, c->x86_capability);
 338
 339         switch (c->x86) {
 340
 341                 case 5:
 342                         switch(c->x86_model) {
 343                         case 4:
 344                                 name="C6";
 345                                 fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
 346                                 fcr_clr=DPDC;
 347                                 printk(KERN_NOTICE "Disabling bugged TSC.\n");
 348                                 clear_bit(X86_FEATURE_TSC, c->x86_capability);
 349 #ifdef CONFIG_X86_OOSTORE
 350                                 centaur_create_optimal_mcr();
 351                                 /* Enable
 352                                         write combining on non-stack, non-string
 353                                         write combining on string, all types
 354                                         weak write ordering
 355
 356                                    The C6 original lacks weak read order
 357
 358                                    Note 0x120 is write only on Winchip 1 */
 359
 360                                 wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
 361 #endif
 362                                 break;
 363                         case 8:
 364                                 switch(c->x86_mask) {
 365                                 default:
 366                                         name="2";
 367                                         break;
 368                                 case 7 ... 9:
 369                                         name="2A";
 370                                         break;
 371                                 case 10 ... 15:
 372                                         name="2B";
 373                                         break;
 374                                 }
 375                                 fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
 376                                 fcr_clr=DPDC;
 377 #ifdef CONFIG_X86_OOSTORE
 378                                 winchip2_unprotect_mcr();
 379                                 winchip2_create_optimal_mcr();
 380                                 rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
 381                                 /* Enable
 382                                         write combining on non-stack, non-string
 383                                         write combining on string, all types
 384                                         weak write ordering
 385                                 */
 386                                 lo|=31;
 387                                 wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
 388                                 winchip2_protect_mcr();
 389 #endif
 390                                 break;
 391                         case 9:
 392                                 name="3";
 393                                 fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
 394                                 fcr_clr=DPDC;
 395 #ifdef CONFIG_X86_OOSTORE
 396                                 winchip2_unprotect_mcr();
 397                                 winchip2_create_optimal_mcr();
 398                                 rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
 399                                 /* Enable
 400                                         write combining on non-stack, non-string
 401                                         write combining on string, all types
 402                                         weak write ordering
 403                                 */
 404                                 lo|=31;
 405                                 wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
 406                                 winchip2_protect_mcr();
 407 #endif
 408                                 break;
 409                         default:
 410                                 name="??";
 411                         }
 412
 413                         rdmsr(MSR_IDT_FCR1, lo, hi);
 414                         newlo=(lo|fcr_set) & (~fcr_clr);
 415
 416                         if (newlo!=lo) {
 417                                 printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
 418                                 wrmsr(MSR_IDT_FCR1, newlo, hi );
 419                         } else {
 420                                 printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
 421                         }
 422                         /* Emulate MTRRs using Centaur's MCR. */
 423                         set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
 424                         /* Report CX8 */
 425                         set_bit(X86_FEATURE_CX8, c->x86_capability);
 426                         /* Set 3DNow! on Winchip 2 and above. */
 427                         if (c->x86_model >=8)
 428                                 set_bit(X86_FEATURE_3DNOW, c->x86_capability);
 429                         /* See if we can find out some more. */
 430                         if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
 431                                 /* Yes, we can. */
 432                                 cpuid(0x80000005,&aa,&bb,&cc,&dd);
 433                                 /* Add L1 data and code cache sizes. */
 434                                 c->x86_cache_size = (cc>>24)+(dd>>24);
 435                         }
 436                         sprintf( c->x86_model_id, "WinChip %s", name );
 437                         break;
 438
 439                 case 6:
 440                         init_c3(c);
 441                         break;
 442         }
 443 }
 444
 445 static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
 446 {
 447         /* VIA C3 CPUs (670-68F) need further shifting. */
 448         if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
 449                 size >>= 8;
 450
 451         /* VIA also screwed up Nehemiah stepping 1, and made
 452            it return '65KB' instead of '64KB'
 453            - Note, it seems this may only be in engineering samples. */
 454         if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65))
 455                 size -=1;
 456
 457         return size;
 458 }
 459
 460 static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 461         .c_vendor       = "Centaur",
 462         .c_ident        = { "CentaurHauls" },
 463         .c_init         = init_centaur,
 464         .c_size_cache   = centaur_size_cache,
 465 };
 466
 467 int __init centaur_init_cpu(void)
 468 {
 469         cpu_devs[X86_VENDOR_CENTAUR] = &centaur_cpu_dev;
 470         return 0;
 471 }