git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/cypress_m8.c

   1 /*
   2  * USB Cypress M8 driver
   3  *
   4  *      Copyright (C) 2004
   5  *          Lonnie Mendez (dignome@gmail.com)
   6  *      Copyright (C) 2003,2004
   7  *          Neil Whelchel (koyama@firstlight.net)
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  * See Documentation/usb/usb-serial.txt for more information on using this
  15  * driver
  16  *
  17  * See http://geocities.com/i0xox0i for information on this driver and the
  18  * earthmate usb device.
  19  *
  20  *  Lonnie Mendez <dignome@gmail.com>
  21  *  4-29-2005
  22  *      Fixed problem where setting or retreiving the serial config would fail
  23  *      with EPIPE.  Removed CRTS toggling so the driver behaves more like
  24  *      other usbserial adapters.  Issued new interval of 1ms instead of the
  25  *      default 10ms.  As a result, transfer speed has been substantially
  26  *      increased from avg. 850bps to avg. 3300bps.  initial termios has also
  27  *      been modified.  Cleaned up code and formatting issues so it is more
  28  *      readable.  Replaced the C++ style comments.
  29  *
  30  *  Lonnie Mendez <dignome@gmail.com>
  31  *  12-15-2004
  32  *      Incorporated write buffering from pl2303 driver.  Fixed bug with line
  33  *      handling so both lines are raised in cypress_open. (was dropping rts)
  34  *      Various code cleanups made as well along with other misc bug fixes.
  35  *
  36  *  Lonnie Mendez <dignome@gmail.com>
  37  *  04-10-2004
  38  *      Driver modified to support dynamic line settings.  Various improvments
  39  *      and features.
  40  *
  41  *  Neil Whelchel
  42  *  10-2003
  43  *      Driver first released.
  44  *
  45  */
  46
  47 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation
  48    for linux. */
  49 /* Thanks to cypress for providing references for the hid reports. */
  50 /* Thanks to Jiang Zhang for providing links and for general help. */
  51 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
  52
  53
  54 #include <linux/kernel.h>
  55 #include <linux/errno.h>
  56 #include <linux/init.h>
  57 #include <linux/slab.h>
  58 #include <linux/tty.h>
  59 #include <linux/tty_driver.h>
  60 #include <linux/tty_flip.h>
  61 #include <linux/module.h>
  62 #include <linux/moduleparam.h>
  63 #include <linux/spinlock.h>
  64 #include <linux/usb.h>
  65 #include <linux/usb/serial.h>
  66 #include <linux/serial.h>
  67 #include <linux/delay.h>
  68 #include <linux/uaccess.h>
  69
  70 #include "cypress_m8.h"
  71
  72
  73 #ifdef CONFIG_USB_SERIAL_DEBUG
  74         static int debug = 1;
  75 #else
  76         static int debug;
  77 #endif
  78 static int stats;
  79 static int interval;
  80
  81 /*
  82  * Version Information
  83  */
  84 #define DRIVER_VERSION "v1.09"
  85 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
  86 #define DRIVER_DESC "Cypress USB to Serial Driver"
  87
  88 /* write buffer size defines */
  89 #define CYPRESS_BUF_SIZE        1024
  90 #define CYPRESS_CLOSING_WAIT    (30*HZ)
  91
  92 static struct usb_device_id id_table_earthmate [] = {
  93         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
  94         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
  95         { }                                             /* Terminating entry */
  96 };
  97
  98 static struct usb_device_id id_table_cyphidcomrs232 [] = {
  99         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 100         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 101         { }                                             /* Terminating entry */
 102 };
 103
 104 static struct usb_device_id id_table_nokiaca42v2 [] = {
 105         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 106         { }                                             /* Terminating entry */
 107 };
 108
 109 static struct usb_device_id id_table_combined [] = {
 110         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 111         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 112         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 113         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 114         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 115         { }                                             /* Terminating entry */
 116 };
 117
 118 MODULE_DEVICE_TABLE(usb, id_table_combined);
 119
 120 static struct usb_driver cypress_driver = {
 121         .name =         "cypress",
 122         .probe =        usb_serial_probe,
 123         .disconnect =   usb_serial_disconnect,
 124         .id_table =     id_table_combined,
 125         .no_dynamic_id =        1,
 126 };
 127
 128 enum packet_format {
 129         packet_format_1,  /* b0:status, b1:payload count */
 130         packet_format_2   /* b0[7:3]:status, b0[2:0]:payload count */
 131 };
 132
 133 struct cypress_private {
 134         spinlock_t lock;                   /* private lock */
 135         int chiptype;                      /* identifier of device, for quirks/etc */
 136         int bytes_in;                      /* used for statistics */
 137         int bytes_out;                     /* used for statistics */
 138         int cmd_count;                     /* used for statistics */
 139         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
 140         struct cypress_buf *buf;           /* write buffer */
 141         int write_urb_in_use;              /* write urb in use indicator */
 142         int write_urb_interval;            /* interval to use for write urb */
 143         int read_urb_interval;             /* interval to use for read urb */
 144         int comm_is_ok;                    /* true if communication is (still) ok */
 145         int termios_initialized;
 146         __u8 line_control;                 /* holds dtr / rts value */
 147         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
 148         __u8 current_config;               /* stores the current configuration byte */
 149         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
 150         enum packet_format pkt_fmt;        /* format to use for packet send / receive */
 151         int get_cfg_unsafe;                /* If true, the CYPRESS_GET_CONFIG is unsafe */
 152         int baud_rate;                     /* stores current baud rate in
 153                                               integer form */
 154         int isthrottled;                   /* if throttled, discard reads */
 155         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 156         char prev_status, diff_status;     /* used for TIOCMIWAIT */
 157         /* we pass a pointer to this as the arguement sent to
 158            cypress_set_termios old_termios */
 159         struct ktermios tmp_termios;       /* stores the old termios settings */
 160 };
 161
 162 /* write buffer structure */
 163 struct cypress_buf {
 164         unsigned int    buf_size;
 165         char            *buf_buf;
 166         char            *buf_get;
 167         char            *buf_put;
 168 };
 169
 170 /* function prototypes for the Cypress USB to serial device */
 171 static int  cypress_earthmate_startup(struct usb_serial *serial);
 172 static int  cypress_hidcom_startup(struct usb_serial *serial);
 173 static int  cypress_ca42v2_startup(struct usb_serial *serial);
 174 static void cypress_release(struct usb_serial *serial);
 175 static int  cypress_open(struct tty_struct *tty,
 176                         struct usb_serial_port *port, struct file *filp);
 177 static void cypress_close(struct usb_serial_port *port);
 178 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 179 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 180                         const unsigned char *buf, int count);
 181 static void cypress_send(struct usb_serial_port *port);
 182 static int  cypress_write_room(struct tty_struct *tty);
 183 static int  cypress_ioctl(struct tty_struct *tty, struct file *file,
 184                         unsigned int cmd, unsigned long arg);
 185 static void cypress_set_termios(struct tty_struct *tty,
 186                         struct usb_serial_port *port, struct ktermios *old);
 187 static int  cypress_tiocmget(struct tty_struct *tty, struct file *file);
 188 static int  cypress_tiocmset(struct tty_struct *tty, struct file *file,
 189                         unsigned int set, unsigned int clear);
 190 static int  cypress_chars_in_buffer(struct tty_struct *tty);
 191 static void cypress_throttle(struct tty_struct *tty);
 192 static void cypress_unthrottle(struct tty_struct *tty);
 193 static void cypress_set_dead(struct usb_serial_port *port);
 194 static void cypress_read_int_callback(struct urb *urb);
 195 static void cypress_write_int_callback(struct urb *urb);
 196 /* write buffer functions */
 197 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
 198 static void cypress_buf_free(struct cypress_buf *cb);
 199 static void cypress_buf_clear(struct cypress_buf *cb);
 200 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
 201 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
 202 static unsigned int cypress_buf_put(struct cypress_buf *cb,
 203                                         const char *buf, unsigned int count);
 204 static unsigned int cypress_buf_get(struct cypress_buf *cb,
 205                                         char *buf, unsigned int count);
 206
 207
 208 static struct usb_serial_driver cypress_earthmate_device = {
 209         .driver = {
 210                 .owner =                THIS_MODULE,
 211                 .name =                 "earthmate",
 212         },
 213         .description =                  "DeLorme Earthmate USB",
 214         .usb_driver =                   &cypress_driver,
 215         .id_table =                     id_table_earthmate,
 216         .num_ports =                    1,
 217         .attach =                       cypress_earthmate_startup,
 218         .release =                      cypress_release,
 219         .open =                         cypress_open,
 220         .close =                        cypress_close,
 221         .dtr_rts =                      cypress_dtr_rts,
 222         .write =                        cypress_write,
 223         .write_room =                   cypress_write_room,
 224         .ioctl =                        cypress_ioctl,
 225         .set_termios =                  cypress_set_termios,
 226         .tiocmget =                     cypress_tiocmget,
 227         .tiocmset =                     cypress_tiocmset,
 228         .chars_in_buffer =              cypress_chars_in_buffer,
 229         .throttle =                     cypress_throttle,
 230         .unthrottle =                   cypress_unthrottle,
 231         .read_int_callback =            cypress_read_int_callback,
 232         .write_int_callback =           cypress_write_int_callback,
 233 };
 234
 235 static struct usb_serial_driver cypress_hidcom_device = {
 236         .driver = {
 237                 .owner =                THIS_MODULE,
 238                 .name =                 "cyphidcom",
 239         },
 240         .description =                  "HID->COM RS232 Adapter",
 241         .usb_driver =                   &cypress_driver,
 242         .id_table =                     id_table_cyphidcomrs232,
 243         .num_ports =                    1,
 244         .attach =                       cypress_hidcom_startup,
 245         .release =                      cypress_release,
 246         .open =                         cypress_open,
 247         .close =                        cypress_close,
 248         .dtr_rts =                      cypress_dtr_rts,
 249         .write =                        cypress_write,
 250         .write_room =                   cypress_write_room,
 251         .ioctl =                        cypress_ioctl,
 252         .set_termios =                  cypress_set_termios,
 253         .tiocmget =                     cypress_tiocmget,
 254         .tiocmset =                     cypress_tiocmset,
 255         .chars_in_buffer =              cypress_chars_in_buffer,
 256         .throttle =                     cypress_throttle,
 257         .unthrottle =                   cypress_unthrottle,
 258         .read_int_callback =            cypress_read_int_callback,
 259         .write_int_callback =           cypress_write_int_callback,
 260 };
 261
 262 static struct usb_serial_driver cypress_ca42v2_device = {
 263         .driver = {
 264                 .owner =                THIS_MODULE,
 265                 .name =                 "nokiaca42v2",
 266         },
 267         .description =                  "Nokia CA-42 V2 Adapter",
 268         .usb_driver =                   &cypress_driver,
 269         .id_table =                     id_table_nokiaca42v2,
 270         .num_ports =                    1,
 271         .attach =                       cypress_ca42v2_startup,
 272         .release =                      cypress_release,
 273         .open =                         cypress_open,
 274         .close =                        cypress_close,
 275         .dtr_rts =                      cypress_dtr_rts,
 276         .write =                        cypress_write,
 277         .write_room =                   cypress_write_room,
 278         .ioctl =                        cypress_ioctl,
 279         .set_termios =                  cypress_set_termios,
 280         .tiocmget =                     cypress_tiocmget,
 281         .tiocmset =                     cypress_tiocmset,
 282         .chars_in_buffer =              cypress_chars_in_buffer,
 283         .throttle =                     cypress_throttle,
 284         .unthrottle =                   cypress_unthrottle,
 285         .read_int_callback =            cypress_read_int_callback,
 286         .write_int_callback =           cypress_write_int_callback,
 287 };
 288
 289 /*****************************************************************************
 290  * Cypress serial helper functions
 291  *****************************************************************************/
 292
 293
 294 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 295 {
 296         struct cypress_private *priv;
 297         priv = usb_get_serial_port_data(port);
 298
 299         /*
 300          * The general purpose firmware for the Cypress M8 allows for
 301          * a maximum speed of 57600bps (I have no idea whether DeLorme
 302          * chose to use the general purpose firmware or not), if you
 303          * need to modify this speed setting for your own project
 304          * please add your own chiptype and modify the code likewise.
 305          * The Cypress HID->COM device will work successfully up to
 306          * 115200bps (but the actual throughput is around 3kBps).
 307          */
 308         if (port->serial->dev->speed == USB_SPEED_LOW) {
 309                 /*
 310                  * Mike Isely <isely@pobox.com> 2-Feb-2008: The
 311                  * Cypress app note that describes this mechanism
 312                  * states the the low-speed part can't handle more
 313                  * than 800 bytes/sec, in which case 4800 baud is the
 314                  * safest speed for a part like that.
 315                  */
 316                 if (new_rate > 4800) {
 317                         dbg("%s - failed setting baud rate, device incapable "
 318                             "speed %d", __func__, new_rate);
 319                         return -1;
 320                 }
 321         }
 322         switch (priv->chiptype) {
 323         case CT_EARTHMATE:
 324                 if (new_rate <= 600) {
 325                         /* 300 and 600 baud rates are supported under
 326                          * the generic firmware, but are not used with
 327                          * NMEA and SiRF protocols */
 328                         dbg("%s - failed setting baud rate, unsupported speed "
 329                             "of %d on Earthmate GPS", __func__, new_rate);
 330                         return -1;
 331                 }
 332                 break;
 333         default:
 334                 break;
 335         }
 336         return new_rate;
 337 }
 338
 339
 340 /* This function can either set or retrieve the current serial line settings */
 341 static int cypress_serial_control(struct tty_struct *tty,
 342         struct usb_serial_port *port, speed_t baud_rate, int data_bits,
 343         int stop_bits, int parity_enable, int parity_type, int reset,
 344         int cypress_request_type)
 345 {
 346         int new_baudrate = 0, retval = 0, tries = 0;
 347         struct cypress_private *priv;
 348         __u8 feature_buffer[5];
 349         unsigned long flags;
 350
 351         dbg("%s", __func__);
 352
 353         priv = usb_get_serial_port_data(port);
 354
 355         if (!priv->comm_is_ok)
 356                 return -ENODEV;
 357
 358         switch (cypress_request_type) {
 359         case CYPRESS_SET_CONFIG:
 360                 new_baudrate = priv->baud_rate;
 361                 /* 0 means 'Hang up' so doesn't change the true bit rate */
 362                 if (baud_rate == 0)
 363                         new_baudrate = priv->baud_rate;
 364                 /* Change of speed ? */
 365                 else if (baud_rate != priv->baud_rate) {
 366                         dbg("%s - baud rate is changing", __func__);
 367                         retval = analyze_baud_rate(port, baud_rate);
 368                         if (retval >=  0) {
 369                                 new_baudrate = retval;
 370                                 dbg("%s - New baud rate set to %d",
 371                                     __func__, new_baudrate);
 372                         }
 373                 }
 374                 dbg("%s - baud rate is being sent as %d",
 375                                         __func__, new_baudrate);
 376
 377                 memset(feature_buffer, 0, sizeof(feature_buffer));
 378                 /* fill the feature_buffer with new configuration */
 379                 *((u_int32_t *)feature_buffer) = new_baudrate;
 380                 feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 381                 /* 1 bit gap */
 382                 feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
 383                 feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
 384                 feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
 385                 /* 1 bit gap */
 386                 feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
 387
 388                 dbg("%s - device is being sent this feature report:",
 389                                                                 __func__);
 390                 dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__,
 391                         feature_buffer[0], feature_buffer[1],
 392                         feature_buffer[2], feature_buffer[3],
 393                         feature_buffer[4]);
 394
 395                 do {
 396                         retval = usb_control_msg(port->serial->dev,
 397                                         usb_sndctrlpipe(port->serial->dev, 0),
 398                                         HID_REQ_SET_REPORT,
 399                                         USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 400                                         0x0300, 0, feature_buffer,
 401                                         sizeof(feature_buffer), 500);
 402
 403                         if (tries++ >= 3)
 404                                 break;
 405
 406                 } while (retval != sizeof(feature_buffer) &&
 407                          retval != -ENODEV);
 408
 409                 if (retval != sizeof(feature_buffer)) {
 410                         dev_err(&port->dev, "%s - failed sending serial "
 411                                 "line settings - %d\n", __func__, retval);
 412                         cypress_set_dead(port);
 413                 } else {
 414                         spin_lock_irqsave(&priv->lock, flags);
 415                         priv->baud_rate = new_baudrate;
 416                         priv->current_config = feature_buffer[4];
 417                         spin_unlock_irqrestore(&priv->lock, flags);
 418                         /* If we asked for a speed change encode it */
 419                         if (baud_rate)
 420                                 tty_encode_baud_rate(tty,
 421                                         new_baudrate, new_baudrate);
 422                 }
 423         break;
 424         case CYPRESS_GET_CONFIG:
 425                 if (priv->get_cfg_unsafe) {
 426                         /* Not implemented for this device,
 427                            and if we try to do it we're likely
 428                            to crash the hardware. */
 429                         return -ENOTTY;
 430                 }
 431                 dbg("%s - retreiving serial line settings", __func__);
 432                 /* set initial values in feature buffer */
 433                 memset(feature_buffer, 0, sizeof(feature_buffer));
 434
 435                 do {
 436                         retval = usb_control_msg(port->serial->dev,
 437                                         usb_rcvctrlpipe(port->serial->dev, 0),
 438                                         HID_REQ_GET_REPORT,
 439                                         USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 440                                         0x0300, 0, feature_buffer,
 441                                         sizeof(feature_buffer), 500);
 442
 443                         if (tries++ >= 3)
 444                                 break;
 445                 } while (retval != sizeof(feature_buffer)
 446                                                 && retval != -ENODEV);
 447
 448                 if (retval != sizeof(feature_buffer)) {
 449                         dev_err(&port->dev, "%s - failed to retrieve serial "
 450                                 "line settings - %d\n", __func__, retval);
 451                         cypress_set_dead(port);
 452                         return retval;
 453                 } else {
 454                         spin_lock_irqsave(&priv->lock, flags);
 455                         /* store the config in one byte, and later
 456                            use bit masks to check values */
 457                         priv->current_config = feature_buffer[4];
 458                         priv->baud_rate = *((u_int32_t *)feature_buffer);
 459                         spin_unlock_irqrestore(&priv->lock, flags);
 460                 }
 461         }
 462         spin_lock_irqsave(&priv->lock, flags);
 463         ++priv->cmd_count;
 464         spin_unlock_irqrestore(&priv->lock, flags);
 465
 466         return retval;
 467 } /* cypress_serial_control */
 468
 469
 470 static void cypress_set_dead(struct usb_serial_port *port)
 471 {
 472         struct cypress_private *priv = usb_get_serial_port_data(port);
 473         unsigned long flags;
 474
 475         spin_lock_irqsave(&priv->lock, flags);
 476         if (!priv->comm_is_ok) {
 477                 spin_unlock_irqrestore(&priv->lock, flags);
 478                 return;
 479         }
 480         priv->comm_is_ok = 0;
 481         spin_unlock_irqrestore(&priv->lock, flags);
 482
 483         dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
 484                 "interval might be too short\n", port->number);
 485 }
 486
 487
 488 /*****************************************************************************
 489  * Cypress serial driver functions
 490  *****************************************************************************/
 491
 492
 493 static int generic_startup(struct usb_serial *serial)
 494 {
 495         struct cypress_private *priv;
 496         struct usb_serial_port *port = serial->port[0];
 497
 498         dbg("%s - port %d", __func__, port->number);
 499
 500         priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 501         if (!priv)
 502                 return -ENOMEM;
 503
 504         priv->comm_is_ok = !0;
 505         spin_lock_init(&priv->lock);
 506         priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
 507         if (priv->buf == NULL) {
 508                 kfree(priv);
 509                 return -ENOMEM;
 510         }
 511         init_waitqueue_head(&priv->delta_msr_wait);
 512
 513         usb_reset_configuration(serial->dev);
 514
 515         priv->cmd_ctrl = 0;
 516         priv->line_control = 0;
 517         priv->termios_initialized = 0;
 518         priv->rx_flags = 0;
 519         /* Default packet format setting is determined by packet size.
 520            Anything with a size larger then 9 must have a separate
 521            count field since the 3 bit count field is otherwise too
 522            small.  Otherwise we can use the slightly more compact
 523            format.  This is in accordance with the cypress_m8 serial
 524            converter app note. */
 525         if (port->interrupt_out_size > 9)
 526                 priv->pkt_fmt = packet_format_1;
 527         else
 528                 priv->pkt_fmt = packet_format_2;
 529
 530         if (interval > 0) {
 531                 priv->write_urb_interval = interval;
 532                 priv->read_urb_interval = interval;
 533                 dbg("%s - port %d read & write intervals forced to %d",
 534                     __func__, port->number, interval);
 535         } else {
 536                 priv->write_urb_interval = port->interrupt_out_urb->interval;
 537                 priv->read_urb_interval = port->interrupt_in_urb->interval;
 538                 dbg("%s - port %d intervals: read=%d write=%d",
 539                     __func__, port->number,
 540                     priv->read_urb_interval, priv->write_urb_interval);
 541         }
 542         usb_set_serial_port_data(port, priv);
 543
 544         return 0;
 545 }
 546
 547
 548 static int cypress_earthmate_startup(struct usb_serial *serial)
 549 {
 550         struct cypress_private *priv;
 551         struct usb_serial_port *port = serial->port[0];
 552
 553         dbg("%s", __func__);
 554
 555         if (generic_startup(serial)) {
 556                 dbg("%s - Failed setting up port %d", __func__,
 557                                 port->number);
 558                 return 1;
 559         }
 560
 561         priv = usb_get_serial_port_data(port);
 562         priv->chiptype = CT_EARTHMATE;
 563         /* All Earthmate devices use the separated-count packet
 564            format!  Idiotic. */
 565         priv->pkt_fmt = packet_format_1;
 566         if (serial->dev->descriptor.idProduct !=
 567                                 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
 568                 /* The old original USB Earthmate seemed able to
 569                    handle GET_CONFIG requests; everything they've
 570                    produced since that time crashes if this command is
 571                    attempted :-( */
 572                 dbg("%s - Marking this device as unsafe for GET_CONFIG "
 573                     "commands", __func__);
 574                 priv->get_cfg_unsafe = !0;
 575         }
 576
 577         return 0;
 578 } /* cypress_earthmate_startup */
 579
 580
 581 static int cypress_hidcom_startup(struct usb_serial *serial)
 582 {
 583         struct cypress_private *priv;
 584
 585         dbg("%s", __func__);
 586
 587         if (generic_startup(serial)) {
 588                 dbg("%s - Failed setting up port %d", __func__,
 589                                 serial->port[0]->number);
 590                 return 1;
 591         }
 592
 593         priv = usb_get_serial_port_data(serial->port[0]);
 594         priv->chiptype = CT_CYPHIDCOM;
 595
 596         return 0;
 597 } /* cypress_hidcom_startup */
 598
 599
 600 static int cypress_ca42v2_startup(struct usb_serial *serial)
 601 {
 602         struct cypress_private *priv;
 603
 604         dbg("%s", __func__);
 605
 606         if (generic_startup(serial)) {
 607                 dbg("%s - Failed setting up port %d", __func__,
 608                                 serial->port[0]->number);
 609                 return 1;
 610         }
 611
 612         priv = usb_get_serial_port_data(serial->port[0]);
 613         priv->chiptype = CT_CA42V2;
 614
 615         return 0;
 616 } /* cypress_ca42v2_startup */
 617
 618
 619 static void cypress_release(struct usb_serial *serial)
 620 {
 621         struct cypress_private *priv;
 622
 623         dbg("%s - port %d", __func__, serial->port[0]->number);
 624
 625         /* all open ports are closed at this point */
 626
 627         priv = usb_get_serial_port_data(serial->port[0]);
 628
 629         if (priv) {
 630                 cypress_buf_free(priv->buf);
 631                 kfree(priv);
 632         }
 633 }
 634
 635
 636 static int cypress_open(struct tty_struct *tty,
 637                         struct usb_serial_port *port, struct file *filp)
 638 {
 639         struct cypress_private *priv = usb_get_serial_port_data(port);
 640         struct usb_serial *serial = port->serial;
 641         unsigned long flags;
 642         int result = 0;
 643
 644         dbg("%s - port %d", __func__, port->number);
 645
 646         if (!priv->comm_is_ok)
 647                 return -EIO;
 648
 649         /* clear halts before open */
 650         usb_clear_halt(serial->dev, 0x81);
 651         usb_clear_halt(serial->dev, 0x02);
 652
 653         spin_lock_irqsave(&priv->lock, flags);
 654         /* reset read/write statistics */
 655         priv->bytes_in = 0;
 656         priv->bytes_out = 0;
 657         priv->cmd_count = 0;
 658         priv->rx_flags = 0;
 659         spin_unlock_irqrestore(&priv->lock, flags);
 660
 661         /* Set termios */
 662         result = cypress_write(tty, port, NULL, 0);
 663
 664         if (result) {
 665                 dev_err(&port->dev,
 666                         "%s - failed setting the control lines - error %d\n",
 667                                                         __func__, result);
 668                 return result;
 669         } else
 670                 dbg("%s - success setting the control lines", __func__);
 671
 672         if (tty)
 673                 cypress_set_termios(tty, port, &priv->tmp_termios);
 674
 675         /* setup the port and start reading from the device */
 676         if (!port->interrupt_in_urb) {
 677                 dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
 678                         __func__);
 679                 return -1;
 680         }
 681
 682         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 683                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 684                 port->interrupt_in_urb->transfer_buffer,
 685                 port->interrupt_in_urb->transfer_buffer_length,
 686                 cypress_read_int_callback, port, priv->read_urb_interval);
 687         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 688
 689         if (result) {
 690                 dev_err(&port->dev,
 691                         "%s - failed submitting read urb, error %d\n",
 692                                                         __func__, result);
 693                 cypress_set_dead(port);
 694         }
 695         port->port.drain_delay = 256;
 696         return result;
 697 } /* cypress_open */
 698
 699 static void cypress_dtr_rts(struct usb_serial_port *port, int on)
 700 {
 701         struct cypress_private *priv = usb_get_serial_port_data(port);
 702         /* drop dtr and rts */
 703         priv = usb_get_serial_port_data(port);
 704         spin_lock_irq(&priv->lock);
 705         if (on == 0)
 706                 priv->line_control = 0;
 707         else
 708                 priv->line_control = CONTROL_DTR | CONTROL_RTS;
 709         priv->cmd_ctrl = 1;
 710         spin_unlock_irq(&priv->lock);
 711         cypress_write(NULL, port, NULL, 0);
 712 }
 713
 714 static void cypress_close(struct usb_serial_port *port)
 715 {
 716         struct cypress_private *priv = usb_get_serial_port_data(port);
 717
 718         dbg("%s - port %d", __func__, port->number);
 719
 720         /* writing is potentially harmful, lock must be taken */
 721         mutex_lock(&port->serial->disc_mutex);
 722         if (port->serial->disconnected) {
 723                 mutex_unlock(&port->serial->disc_mutex);
 724                 return;
 725         }
 726         cypress_buf_clear(priv->buf);
 727         dbg("%s - stopping urbs", __func__);
 728         usb_kill_urb(port->interrupt_in_urb);
 729         usb_kill_urb(port->interrupt_out_urb);
 730
 731
 732         if (stats)
 733                 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 734                         priv->bytes_in, priv->bytes_out, priv->cmd_count);
 735         mutex_unlock(&port->serial->disc_mutex);
 736 } /* cypress_close */
 737
 738
 739 static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 740                                         const unsigned char *buf, int count)
 741 {
 742         struct cypress_private *priv = usb_get_serial_port_data(port);
 743         unsigned long flags;
 744
 745         dbg("%s - port %d, %d bytes", __func__, port->number, count);
 746
 747         /* line control commands, which need to be executed immediately,
 748            are not put into the buffer for obvious reasons.
 749          */
 750         if (priv->cmd_ctrl) {
 751                 count = 0;
 752                 goto finish;
 753         }
 754
 755         if (!count)
 756                 return count;
 757
 758         spin_lock_irqsave(&priv->lock, flags);
 759         count = cypress_buf_put(priv->buf, buf, count);
 760         spin_unlock_irqrestore(&priv->lock, flags);
 761
 762 finish:
 763         cypress_send(port);
 764
 765         return count;
 766 } /* cypress_write */
 767
 768
 769 static void cypress_send(struct usb_serial_port *port)
 770 {
 771         int count = 0, result, offset, actual_size;
 772         struct cypress_private *priv = usb_get_serial_port_data(port);
 773         unsigned long flags;
 774
 775         if (!priv->comm_is_ok)
 776                 return;
 777
 778         dbg("%s - port %d", __func__, port->number);
 779         dbg("%s - interrupt out size is %d", __func__,
 780                                                 port->interrupt_out_size);
 781
 782         spin_lock_irqsave(&priv->lock, flags);
 783         if (priv->write_urb_in_use) {
 784                 dbg("%s - can't write, urb in use", __func__);
 785                 spin_unlock_irqrestore(&priv->lock, flags);
 786                 return;
 787         }
 788         spin_unlock_irqrestore(&priv->lock, flags);
 789
 790         /* clear buffer */
 791         memset(port->interrupt_out_urb->transfer_buffer, 0,
 792                                                 port->interrupt_out_size);
 793
 794         spin_lock_irqsave(&priv->lock, flags);
 795         switch (priv->pkt_fmt) {
 796         default:
 797         case packet_format_1:
 798                 /* this is for the CY7C64013... */
 799                 offset = 2;
 800                 port->interrupt_out_buffer[0] = priv->line_control;
 801                 break;
 802         case packet_format_2:
 803                 /* this is for the CY7C63743... */
 804                 offset = 1;
 805                 port->interrupt_out_buffer[0] = priv->line_control;
 806                 break;
 807         }
 808
 809         if (priv->line_control & CONTROL_RESET)
 810                 priv->line_control &= ~CONTROL_RESET;
 811
 812         if (priv->cmd_ctrl) {
 813                 priv->cmd_count++;
 814                 dbg("%s - line control command being issued", __func__);
 815                 spin_unlock_irqrestore(&priv->lock, flags);
 816                 goto send;
 817         } else
 818                 spin_unlock_irqrestore(&priv->lock, flags);
 819
 820         count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
 821                                 port->interrupt_out_size-offset);
 822
 823         if (count == 0)
 824                 return;
 825
 826         switch (priv->pkt_fmt) {
 827         default:
 828         case packet_format_1:
 829                 port->interrupt_out_buffer[1] = count;
 830                 break;
 831         case packet_format_2:
 832                 port->interrupt_out_buffer[0] |= count;
 833         }
 834
 835         dbg("%s - count is %d", __func__, count);
 836
 837 send:
 838         spin_lock_irqsave(&priv->lock, flags);
 839         priv->write_urb_in_use = 1;
 840         spin_unlock_irqrestore(&priv->lock, flags);
 841
 842         if (priv->cmd_ctrl)
 843                 actual_size = 1;
 844         else
 845                 actual_size = count +
 846                               (priv->pkt_fmt == packet_format_1 ? 2 : 1);
 847
 848         usb_serial_debug_data(debug, &port->dev, __func__,
 849                 port->interrupt_out_size,
 850                 port->interrupt_out_urb->transfer_buffer);
 851
 852         usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
 853                 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
 854                 port->interrupt_out_buffer, port->interrupt_out_size,
 855                 cypress_write_int_callback, port, priv->write_urb_interval);
 856         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 857         if (result) {
 858                 dev_err(&port->dev,
 859                                 "%s - failed submitting write urb, error %d\n",
 860                                                         __func__, result);
 861                 priv->write_urb_in_use = 0;
 862                 cypress_set_dead(port);
 863         }
 864
 865         spin_lock_irqsave(&priv->lock, flags);
 866         if (priv->cmd_ctrl)
 867                 priv->cmd_ctrl = 0;
 868
 869         /* do not count the line control and size bytes */
 870         priv->bytes_out += count;
 871         spin_unlock_irqrestore(&priv->lock, flags);
 872
 873         usb_serial_port_softint(port);
 874 } /* cypress_send */
 875
 876
 877 /* returns how much space is available in the soft buffer */
 878 static int cypress_write_room(struct tty_struct *tty)
 879 {
 880         struct usb_serial_port *port = tty->driver_data;
 881         struct cypress_private *priv = usb_get_serial_port_data(port);
 882         int room = 0;
 883         unsigned long flags;
 884
 885         dbg("%s - port %d", __func__, port->number);
 886
 887         spin_lock_irqsave(&priv->lock, flags);
 888         room = cypress_buf_space_avail(priv->buf);
 889         spin_unlock_irqrestore(&priv->lock, flags);
 890
 891         dbg("%s - returns %d", __func__, room);
 892         return room;
 893 }
 894
 895
 896 static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
 897 {
 898         struct usb_serial_port *port = tty->driver_data;
 899         struct cypress_private *priv = usb_get_serial_port_data(port);
 900         __u8 status, control;
 901         unsigned int result = 0;
 902         unsigned long flags;
 903
 904         dbg("%s - port %d", __func__, port->number);
 905
 906         spin_lock_irqsave(&priv->lock, flags);
 907         control = priv->line_control;
 908         status = priv->current_status;
 909         spin_unlock_irqrestore(&priv->lock, flags);
 910
 911         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
 912                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
 913                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 914                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 915                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
 916                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
 917
 918         dbg("%s - result = %x", __func__, result);
 919
 920         return result;
 921 }
 922
 923
 924 static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
 925                                unsigned int set, unsigned int clear)
 926 {
 927         struct usb_serial_port *port = tty->driver_data;
 928         struct cypress_private *priv = usb_get_serial_port_data(port);
 929         unsigned long flags;
 930
 931         dbg("%s - port %d", __func__, port->number);
 932
 933         spin_lock_irqsave(&priv->lock, flags);
 934         if (set & TIOCM_RTS)
 935                 priv->line_control |= CONTROL_RTS;
 936         if (set & TIOCM_DTR)
 937                 priv->line_control |= CONTROL_DTR;
 938         if (clear & TIOCM_RTS)
 939                 priv->line_control &= ~CONTROL_RTS;
 940         if (clear & TIOCM_DTR)
 941                 priv->line_control &= ~CONTROL_DTR;
 942         priv->cmd_ctrl = 1;
 943         spin_unlock_irqrestore(&priv->lock, flags);
 944
 945         return cypress_write(tty, port, NULL, 0);
 946 }
 947
 948
 949 static int cypress_ioctl(struct tty_struct *tty, struct file *file,
 950                                         unsigned int cmd, unsigned long arg)
 951 {
 952         struct usb_serial_port *port = tty->driver_data;
 953         struct cypress_private *priv = usb_get_serial_port_data(port);
 954
 955         dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 956
 957         switch (cmd) {
 958         /* This code comes from drivers/char/serial.c and ftdi_sio.c */
 959         case TIOCMIWAIT:
 960                 while (priv != NULL) {
 961                         interruptible_sleep_on(&priv->delta_msr_wait);
 962                         /* see if a signal did it */
 963                         if (signal_pending(current))
 964                                 return -ERESTARTSYS;
 965                         else {
 966                                 char diff = priv->diff_status;
 967                                 if (diff == 0)
 968                                         return -EIO; /* no change => error */
 969
 970                                 /* consume all events */
 971                                 priv->diff_status = 0;
 972
 973                                 /* return 0 if caller wanted to know about
 974                                    these bits */
 975                                 if (((arg & TIOCM_RNG) && (diff & UART_RI)) ||
 976                                     ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
 977                                     ((arg & TIOCM_CD) && (diff & UART_CD)) ||
 978                                     ((arg & TIOCM_CTS) && (diff & UART_CTS)))
 979                                         return 0;
 980                                 /* otherwise caller can't care less about what
 981                                  * happened, and so we continue to wait for
 982                                  * more events.
 983                                  */
 984                         }
 985                 }
 986                 return 0;
 987         default:
 988                 break;
 989         }
 990         dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
 991         return -ENOIOCTLCMD;
 992 } /* cypress_ioctl */
 993
 994
 995 static void cypress_set_termios(struct tty_struct *tty,
 996         struct usb_serial_port *port, struct ktermios *old_termios)
 997 {
 998         struct cypress_private *priv = usb_get_serial_port_data(port);
 999         int data_bits, stop_bits, parity_type, parity_enable;
1000         unsigned cflag, iflag;
1001         unsigned long flags;
1002         __u8 oldlines;
1003         int linechange = 0;
1004
1005         dbg("%s - port %d", __func__, port->number);
1006
1007         spin_lock_irqsave(&priv->lock, flags);
1008         if (!priv->termios_initialized) {
1009                 if (priv->chiptype == CT_EARTHMATE) {
1010                         *(tty->termios) = tty_std_termios;
1011                         tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
1012                                 CLOCAL;
1013                         tty->termios->c_ispeed = 4800;
1014                         tty->termios->c_ospeed = 4800;
1015                 } else if (priv->chiptype == CT_CYPHIDCOM) {
1016                         *(tty->termios) = tty_std_termios;
1017                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1018                                 CLOCAL;
1019                         tty->termios->c_ispeed = 9600;
1020                         tty->termios->c_ospeed = 9600;
1021                 } else if (priv->chiptype == CT_CA42V2) {
1022                         *(tty->termios) = tty_std_termios;
1023                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1024                                 CLOCAL;
1025                         tty->termios->c_ispeed = 9600;
1026                         tty->termios->c_ospeed = 9600;
1027                 }
1028                 priv->termios_initialized = 1;
1029         }
1030         spin_unlock_irqrestore(&priv->lock, flags);
1031
1032         /* Unsupported features need clearing */
1033         tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
1034
1035         cflag = tty->termios->c_cflag;
1036         iflag = tty->termios->c_iflag;
1037
1038         /* check if there are new settings */
1039         if (old_termios) {
1040                 spin_lock_irqsave(&priv->lock, flags);
1041                 priv->tmp_termios = *(tty->termios);
1042                 spin_unlock_irqrestore(&priv->lock, flags);
1043         }
1044
1045         /* set number of data bits, parity, stop bits */
1046         /* when parity is disabled the parity type bit is ignored */
1047
1048         /* 1 means 2 stop bits, 0 means 1 stop bit */
1049         stop_bits = cflag & CSTOPB ? 1 : 0;
1050
1051         if (cflag & PARENB) {
1052                 parity_enable = 1;
1053                 /* 1 means odd parity, 0 means even parity */
1054                 parity_type = cflag & PARODD ? 1 : 0;
1055         } else
1056                 parity_enable = parity_type = 0;
1057
1058         switch (cflag & CSIZE) {
1059         case CS5:
1060                 data_bits = 0;
1061                 break;
1062         case CS6:
1063                 data_bits = 1;
1064                 break;
1065         case CS7:
1066                 data_bits = 2;
1067                 break;
1068         case CS8:
1069                 data_bits = 3;
1070                 break;
1071         default:
1072                 dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n",
1073                         __func__);
1074                 data_bits = 3;
1075         }
1076         spin_lock_irqsave(&priv->lock, flags);
1077         oldlines = priv->line_control;
1078         if ((cflag & CBAUD) == B0) {
1079                 /* drop dtr and rts */
1080                 dbg("%s - dropping the lines, baud rate 0bps", __func__);
1081                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
1082         } else
1083                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1084         spin_unlock_irqrestore(&priv->lock, flags);
1085
1086         dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1087                         "%d data_bits (+5)", __func__, stop_bits,
1088                         parity_enable, parity_type, data_bits);
1089
1090         cypress_serial_control(tty, port, tty_get_baud_rate(tty),
1091                         data_bits, stop_bits,
1092                         parity_enable, parity_type,
1093                         0, CYPRESS_SET_CONFIG);
1094
1095         /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1096          * filled into the private structure this should confirm that all is
1097          * working if it returns what we just set */
1098         cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1099
1100         /* Here we can define custom tty settings for devices; the main tty
1101          * termios flag base comes from empeg.c */
1102
1103         spin_lock_irqsave(&priv->lock, flags);
1104         if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
1105                 dbg("Using custom termios settings for a baud rate of "
1106                                 "4800bps.");
1107                 /* define custom termios settings for NMEA protocol */
1108
1109                 tty->termios->c_iflag /* input modes - */
1110                         &= ~(IGNBRK  /* disable ignore break */
1111                         | BRKINT     /* disable break causes interrupt */
1112                         | PARMRK     /* disable mark parity errors */
1113                         | ISTRIP     /* disable clear high bit of input char */
1114                         | INLCR      /* disable translate NL to CR */
1115                         | IGNCR      /* disable ignore CR */
1116                         | ICRNL      /* disable translate CR to NL */
1117                         | IXON);     /* disable enable XON/XOFF flow control */
1118
1119                 tty->termios->c_oflag /* output modes */
1120                         &= ~OPOST;    /* disable postprocess output char */
1121
1122                 tty->termios->c_lflag /* line discipline modes */
1123                         &= ~(ECHO     /* disable echo input characters */
1124                         | ECHONL      /* disable echo new line */
1125                         | ICANON      /* disable erase, kill, werase, and rprnt
1126                                          special characters */
1127                         | ISIG        /* disable interrupt, quit, and suspend
1128                                          special characters */
1129                         | IEXTEN);    /* disable non-POSIX special characters */
1130         } /* CT_CYPHIDCOM: Application should handle this for device */
1131
1132         linechange = (priv->line_control != oldlines);
1133         spin_unlock_irqrestore(&priv->lock, flags);
1134
1135         /* if necessary, set lines */
1136         if (linechange) {
1137                 priv->cmd_ctrl = 1;
1138                 cypress_write(tty, port, NULL, 0);
1139         }
1140 } /* cypress_set_termios */
1141
1142
1143 /* returns amount of data still left in soft buffer */
1144 static int cypress_chars_in_buffer(struct tty_struct *tty)
1145 {
1146         struct usb_serial_port *port = tty->driver_data;
1147         struct cypress_private *priv = usb_get_serial_port_data(port);
1148         int chars = 0;
1149         unsigned long flags;
1150
1151         dbg("%s - port %d", __func__, port->number);
1152
1153         spin_lock_irqsave(&priv->lock, flags);
1154         chars = cypress_buf_data_avail(priv->buf);
1155         spin_unlock_irqrestore(&priv->lock, flags);
1156
1157         dbg("%s - returns %d", __func__, chars);
1158         return chars;
1159 }
1160
1161
1162 static void cypress_throttle(struct tty_struct *tty)
1163 {
1164         struct usb_serial_port *port = tty->driver_data;
1165         struct cypress_private *priv = usb_get_serial_port_data(port);
1166         unsigned long flags;
1167
1168         dbg("%s - port %d", __func__, port->number);
1169
1170         spin_lock_irqsave(&priv->lock, flags);
1171         priv->rx_flags = THROTTLED;
1172         spin_unlock_irqrestore(&priv->lock, flags);
1173 }
1174
1175
1176 static void cypress_unthrottle(struct tty_struct *tty)
1177 {
1178         struct usb_serial_port *port = tty->driver_data;
1179         struct cypress_private *priv = usb_get_serial_port_data(port);
1180         int actually_throttled, result;
1181         unsigned long flags;
1182
1183         dbg("%s - port %d", __func__, port->number);
1184
1185         spin_lock_irqsave(&priv->lock, flags);
1186         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1187         priv->rx_flags = 0;
1188         spin_unlock_irqrestore(&priv->lock, flags);
1189
1190         if (!priv->comm_is_ok)
1191                 return;
1192
1193         if (actually_throttled) {
1194                 port->interrupt_in_urb->dev = port->serial->dev;
1195
1196                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1197                 if (result) {
1198                         dev_err(&port->dev, "%s - failed submitting read urb, "
1199                                         "error %d\n", __func__, result);
1200                         cypress_set_dead(port);
1201                 }
1202         }
1203 }
1204
1205
1206 static void cypress_read_int_callback(struct urb *urb)
1207 {
1208         struct usb_serial_port *port = urb->context;
1209         struct cypress_private *priv = usb_get_serial_port_data(port);
1210         struct tty_struct *tty;
1211         unsigned char *data = urb->transfer_buffer;
1212         unsigned long flags;
1213         char tty_flag = TTY_NORMAL;
1214         int havedata = 0;
1215         int bytes = 0;
1216         int result;
1217         int i = 0;
1218         int status = urb->status;
1219
1220         dbg("%s - port %d", __func__, port->number);
1221
1222         switch (status) {
1223         case 0: /* success */
1224                 break;
1225         case -ECONNRESET:
1226         case -ENOENT:
1227         case -ESHUTDOWN:
1228                 /* precursor to disconnect so just go away */
1229                 return;
1230         case -EPIPE:
1231                 usb_clear_halt(port->serial->dev, 0x81);
1232                 break;
1233         default:
1234                 /* something ugly is going on... */
1235                 dev_err(&urb->dev->dev,
1236                         "%s - unexpected nonzero read status received: %d\n",
1237                                                         __func__, status);
1238                 cypress_set_dead(port);
1239                 return;
1240         }
1241
1242         spin_lock_irqsave(&priv->lock, flags);
1243         if (priv->rx_flags & THROTTLED) {
1244                 dbg("%s - now throttling", __func__);
1245                 priv->rx_flags |= ACTUALLY_THROTTLED;
1246                 spin_unlock_irqrestore(&priv->lock, flags);
1247                 return;
1248         }
1249         spin_unlock_irqrestore(&priv->lock, flags);
1250
1251         tty = tty_port_tty_get(&port->port);
1252         if (!tty) {
1253                 dbg("%s - bad tty pointer - exiting", __func__);
1254                 return;
1255         }
1256
1257         spin_lock_irqsave(&priv->lock, flags);
1258         result = urb->actual_length;
1259         switch (priv->pkt_fmt) {
1260         default:
1261         case packet_format_1:
1262                 /* This is for the CY7C64013... */
1263                 priv->current_status = data[0] & 0xF8;
1264                 bytes = data[1] + 2;
1265                 i = 2;
1266                 if (bytes > 2)
1267                         havedata = 1;
1268                 break;
1269         case packet_format_2:
1270                 /* This is for the CY7C63743... */
1271                 priv->current_status = data[0] & 0xF8;
1272                 bytes = (data[0] & 0x07) + 1;
1273                 i = 1;
1274                 if (bytes > 1)
1275                         havedata = 1;
1276                 break;
1277         }
1278         spin_unlock_irqrestore(&priv->lock, flags);
1279         if (result < bytes) {
1280                 dbg("%s - wrong packet size - received %d bytes but packet "
1281                     "said %d bytes", __func__, result, bytes);
1282                 goto continue_read;
1283         }
1284
1285         usb_serial_debug_data(debug, &port->dev, __func__,
1286                                                 urb->actual_length, data);
1287
1288         spin_lock_irqsave(&priv->lock, flags);
1289         /* check to see if status has changed */
1290         if (priv->current_status != priv->prev_status) {
1291                 priv->diff_status |= priv->current_status ^
1292                         priv->prev_status;
1293                 wake_up_interruptible(&priv->delta_msr_wait);
1294                 priv->prev_status = priv->current_status;
1295         }
1296         spin_unlock_irqrestore(&priv->lock, flags);
1297
1298         /* hangup, as defined in acm.c... this might be a bad place for it
1299          * though */
1300         if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1301                         !(priv->current_status & UART_CD)) {
1302                 dbg("%s - calling hangup", __func__);
1303                 tty_hangup(tty);
1304                 goto continue_read;
1305         }
1306
1307         /* There is one error bit... I'm assuming it is a parity error
1308          * indicator as the generic firmware will set this bit to 1 if a
1309          * parity error occurs.
1310          * I can not find reference to any other error events. */
1311         spin_lock_irqsave(&priv->lock, flags);
1312         if (priv->current_status & CYP_ERROR) {
1313                 spin_unlock_irqrestore(&priv->lock, flags);
1314                 tty_flag = TTY_PARITY;
1315                 dbg("%s - Parity Error detected", __func__);
1316         } else
1317                 spin_unlock_irqrestore(&priv->lock, flags);
1318
1319         /* process read if there is data other than line status */
1320         if (tty && (bytes > i)) {
1321                 bytes = tty_buffer_request_room(tty, bytes);
1322                 for (; i < bytes ; ++i) {
1323                         dbg("pushing byte number %d - %d - %c", i, data[i],
1324                                         data[i]);
1325                         tty_insert_flip_char(tty, data[i], tty_flag);
1326                 }
1327                 tty_flip_buffer_push(tty);
1328         }
1329
1330         spin_lock_irqsave(&priv->lock, flags);
1331         /* control and status byte(s) are also counted */
1332         priv->bytes_in += bytes;
1333         spin_unlock_irqrestore(&priv->lock, flags);
1334
1335 continue_read:
1336         tty_kref_put(tty);
1337
1338         /* Continue trying to always read... unless the port has closed. */
1339
1340         if (port->port.count > 0 && priv->comm_is_ok) {
1341                 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1342                                 usb_rcvintpipe(port->serial->dev,
1343                                         port->interrupt_in_endpointAddress),
1344                                 port->interrupt_in_urb->transfer_buffer,
1345                                 port->interrupt_in_urb->transfer_buffer_length,
1346                                 cypress_read_int_callback, port,
1347                                 priv->read_urb_interval);
1348                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1349                 if (result) {
1350                         dev_err(&urb->dev->dev, "%s - failed resubmitting "
1351                                         "read urb, error %d\n", __func__,
1352                                         result);
1353                         cypress_set_dead(port);
1354                 }
1355         }
1356
1357         return;
1358 } /* cypress_read_int_callback */
1359
1360
1361 static void cypress_write_int_callback(struct urb *urb)
1362 {
1363         struct usb_serial_port *port = urb->context;
1364         struct cypress_private *priv = usb_get_serial_port_data(port);
1365         int result;
1366         int status = urb->status;
1367
1368         dbg("%s - port %d", __func__, port->number);
1369
1370         switch (status) {
1371         case 0:
1372                 /* success */
1373                 break;
1374         case -ECONNRESET:
1375         case -ENOENT:
1376         case -ESHUTDOWN:
1377                 /* this urb is terminated, clean up */
1378                 dbg("%s - urb shutting down with status: %d",
1379                                                 __func__, status);
1380                 priv->write_urb_in_use = 0;
1381                 return;
1382         case -EPIPE: /* no break needed; clear halt and resubmit */
1383                 if (!priv->comm_is_ok)
1384                         break;
1385                 usb_clear_halt(port->serial->dev, 0x02);
1386                 /* error in the urb, so we have to resubmit it */
1387                 dbg("%s - nonzero write bulk status received: %d",
1388                         __func__, status);
1389                 port->interrupt_out_urb->transfer_buffer_length = 1;
1390                 port->interrupt_out_urb->dev = port->serial->dev;
1391                 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1392                 if (!result)
1393                         return;
1394                 dev_err(&urb->dev->dev,
1395                         "%s - failed resubmitting write urb, error %d\n",
1396                                                         __func__, result);
1397                 cypress_set_dead(port);
1398                 break;
1399         default:
1400                 dev_err(&urb->dev->dev,
1401                          "%s - unexpected nonzero write status received: %d\n",
1402                                                         __func__, status);
1403                 cypress_set_dead(port);
1404                 break;
1405         }
1406         priv->write_urb_in_use = 0;
1407
1408         /* send any buffered data */
1409         cypress_send(port);
1410 }
1411
1412
1413 /*****************************************************************************
1414  * Write buffer functions - buffering code from pl2303 used
1415  *****************************************************************************/
1416
1417 /*
1418  * cypress_buf_alloc
1419  *
1420  * Allocate a circular buffer and all associated memory.
1421  */
1422
1423 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1424 {
1425
1426         struct cypress_buf *cb;
1427
1428
1429         if (size == 0)
1430                 return NULL;
1431
1432         cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1433         if (cb == NULL)
1434                 return NULL;
1435
1436         cb->buf_buf = kmalloc(size, GFP_KERNEL);
1437         if (cb->buf_buf == NULL) {
1438                 kfree(cb);
1439                 return NULL;
1440         }
1441
1442         cb->buf_size = size;
1443         cb->buf_get = cb->buf_put = cb->buf_buf;
1444
1445         return cb;
1446
1447 }
1448
1449
1450 /*
1451  * cypress_buf_free
1452  *
1453  * Free the buffer and all associated memory.
1454  */
1455
1456 static void cypress_buf_free(struct cypress_buf *cb)
1457 {
1458         if (cb) {
1459                 kfree(cb->buf_buf);
1460                 kfree(cb);
1461         }
1462 }
1463
1464
1465 /*
1466  * cypress_buf_clear
1467  *
1468  * Clear out all data in the circular buffer.
1469  */
1470
1471 static void cypress_buf_clear(struct cypress_buf *cb)
1472 {
1473         if (cb != NULL)
1474                 cb->buf_get = cb->buf_put;
1475                 /* equivalent to a get of all data available */
1476 }
1477
1478
1479 /*
1480  * cypress_buf_data_avail
1481  *
1482  * Return the number of bytes of data available in the circular
1483  * buffer.
1484  */
1485
1486 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1487 {
1488         if (cb != NULL)
1489                 return (cb->buf_size + cb->buf_put - cb->buf_get)
1490                                                         % cb->buf_size;
1491         else
1492                 return 0;
1493 }
1494
1495
1496 /*
1497  * cypress_buf_space_avail
1498  *
1499  * Return the number of bytes of space available in the circular
1500  * buffer.
1501  */
1502
1503 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1504 {
1505         if (cb != NULL)
1506                 return (cb->buf_size + cb->buf_get - cb->buf_put - 1)
1507                                                         % cb->buf_size;
1508         else
1509                 return 0;
1510 }
1511
1512
1513 /*
1514  * cypress_buf_put
1515  *
1516  * Copy data data from a user buffer and put it into the circular buffer.
1517  * Restrict to the amount of space available.
1518  *
1519  * Return the number of bytes copied.
1520  */
1521
1522 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1523         unsigned int count)
1524 {
1525
1526         unsigned int len;
1527
1528
1529         if (cb == NULL)
1530                 return 0;
1531
1532         len  = cypress_buf_space_avail(cb);
1533         if (count > len)
1534                 count = len;
1535
1536         if (count == 0)
1537                 return 0;
1538
1539         len = cb->buf_buf + cb->buf_size - cb->buf_put;
1540         if (count > len) {
1541                 memcpy(cb->buf_put, buf, len);
1542                 memcpy(cb->buf_buf, buf+len, count - len);
1543                 cb->buf_put = cb->buf_buf + count - len;
1544         } else {
1545                 memcpy(cb->buf_put, buf, count);
1546                 if (count < len)
1547                         cb->buf_put += count;
1548                 else /* count == len */
1549                         cb->buf_put = cb->buf_buf;
1550         }
1551
1552         return count;
1553
1554 }
1555
1556
1557 /*
1558  * cypress_buf_get
1559  *
1560  * Get data from the circular buffer and copy to the given buffer.
1561  * Restrict to the amount of data available.
1562  *
1563  * Return the number of bytes copied.
1564  */
1565
1566 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1567         unsigned int count)
1568 {
1569
1570         unsigned int len;
1571
1572
1573         if (cb == NULL)
1574                 return 0;
1575
1576         len = cypress_buf_data_avail(cb);
1577         if (count > len)
1578                 count = len;
1579
1580         if (count == 0)
1581                 return 0;
1582
1583         len = cb->buf_buf + cb->buf_size - cb->buf_get;
1584         if (count > len) {
1585                 memcpy(buf, cb->buf_get, len);
1586                 memcpy(buf+len, cb->buf_buf, count - len);
1587                 cb->buf_get = cb->buf_buf + count - len;
1588         } else {
1589                 memcpy(buf, cb->buf_get, count);
1590                 if (count < len)
1591                         cb->buf_get += count;
1592                 else /* count == len */
1593                         cb->buf_get = cb->buf_buf;
1594         }
1595
1596         return count;
1597
1598 }
1599
1600 /*****************************************************************************
1601  * Module functions
1602  *****************************************************************************/
1603
1604 static int __init cypress_init(void)
1605 {
1606         int retval;
1607
1608         dbg("%s", __func__);
1609
1610         retval = usb_serial_register(&cypress_earthmate_device);
1611         if (retval)
1612                 goto failed_em_register;
1613         retval = usb_serial_register(&cypress_hidcom_device);
1614         if (retval)
1615                 goto failed_hidcom_register;
1616         retval = usb_serial_register(&cypress_ca42v2_device);
1617         if (retval)
1618                 goto failed_ca42v2_register;
1619         retval = usb_register(&cypress_driver);
1620         if (retval)
1621                 goto failed_usb_register;
1622
1623         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
1624                DRIVER_DESC "\n");
1625         return 0;
1626
1627 failed_usb_register:
1628         usb_serial_deregister(&cypress_ca42v2_device);
1629 failed_ca42v2_register:
1630         usb_serial_deregister(&cypress_hidcom_device);
1631 failed_hidcom_register:
1632         usb_serial_deregister(&cypress_earthmate_device);
1633 failed_em_register:
1634         return retval;
1635 }
1636
1637
1638 static void __exit cypress_exit(void)
1639 {
1640         dbg("%s", __func__);
1641
1642         usb_deregister(&cypress_driver);
1643         usb_serial_deregister(&cypress_earthmate_device);
1644         usb_serial_deregister(&cypress_hidcom_device);
1645         usb_serial_deregister(&cypress_ca42v2_device);
1646 }
1647
1648
1649 module_init(cypress_init);
1650 module_exit(cypress_exit);
1651
1652 MODULE_AUTHOR(DRIVER_AUTHOR);
1653 MODULE_DESCRIPTION(DRIVER_DESC);
1654 MODULE_VERSION(DRIVER_VERSION);
1655 MODULE_LICENSE("GPL");
1656
1657 module_param(debug, bool, S_IRUGO | S_IWUSR);
1658 MODULE_PARM_DESC(debug, "Debug enabled or not");
1659 module_param(stats, bool, S_IRUGO | S_IWUSR);
1660 MODULE_PARM_DESC(stats, "Enable statistics or not");
1661 module_param(interval, int, S_IRUGO | S_IWUSR);
1662 MODULE_PARM_DESC(interval, "Overrides interrupt interval");