git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/b43/main.c

   1 /*
   2
   3   Broadcom B43 wireless driver
   4
   5   Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
   6   Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it>
   7   Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
   8   Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
   9   Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
  10
  11   Some parts of the code in this file are derived from the ipw2200
  12   driver  Copyright(c) 2003 - 2004 Intel Corporation.
  13
  14   This program is free software; you can redistribute it and/or modify
  15   it under the terms of the GNU General Public License as published by
  16   the Free Software Foundation; either version 2 of the License, or
  17   (at your option) any later version.
  18
  19   This program is distributed in the hope that it will be useful,
  20   but WITHOUT ANY WARRANTY; without even the implied warranty of
  21   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22   GNU General Public License for more details.
  23
  24   You should have received a copy of the GNU General Public License
  25   along with this program; see the file COPYING.  If not, write to
  26   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  27   Boston, MA 02110-1301, USA.
  28
  29 */
  30
  31 #include <linux/delay.h>
  32 #include <linux/init.h>
  33 #include <linux/moduleparam.h>
  34 #include <linux/if_arp.h>
  35 #include <linux/etherdevice.h>
  36 #include <linux/version.h>
  37 #include <linux/firmware.h>
  38 #include <linux/wireless.h>
  39 #include <linux/workqueue.h>
  40 #include <linux/skbuff.h>
  41 #include <linux/io.h>
  42 #include <linux/dma-mapping.h>
  43 #include <asm/unaligned.h>
  44
  45 #include "b43.h"
  46 #include "main.h"
  47 #include "debugfs.h"
  48 #include "phy.h"
  49 #include "dma.h"
  50 #include "sysfs.h"
  51 #include "xmit.h"
  52 #include "lo.h"
  53 #include "pcmcia.h"
  54
  55 MODULE_DESCRIPTION("Broadcom B43 wireless driver");
  56 MODULE_AUTHOR("Martin Langer");
  57 MODULE_AUTHOR("Stefano Brivio");
  58 MODULE_AUTHOR("Michael Buesch");
  59 MODULE_LICENSE("GPL");
  60
  61 MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID);
  62
  63
  64 static int modparam_bad_frames_preempt;
  65 module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
  66 MODULE_PARM_DESC(bad_frames_preempt,
  67                  "enable(1) / disable(0) Bad Frames Preemption");
  68
  69 static char modparam_fwpostfix[16];
  70 module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
  71 MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load.");
  72
  73 static int modparam_hwpctl;
  74 module_param_named(hwpctl, modparam_hwpctl, int, 0444);
  75 MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)");
  76
  77 static int modparam_nohwcrypt;
  78 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
  79 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  80
  81 static const struct ssb_device_id b43_ssb_tbl[] = {
  82         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
  83         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
  84         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7),
  85         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
  86         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
  87         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
  88         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
  89         SSB_DEVTABLE_END
  90 };
  91
  92 MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl);
  93
  94 /* Channel and ratetables are shared for all devices.
  95  * They can't be const, because ieee80211 puts some precalculated
  96  * data in there. This data is the same for all devices, so we don't
  97  * get concurrency issues */
  98 #define RATETAB_ENT(_rateid, _flags) \
  99         {                                                       \
 100                 .rate   = B43_RATE_TO_BASE100KBPS(_rateid),     \
 101                 .val    = (_rateid),                            \
 102                 .val2   = (_rateid),                            \
 103                 .flags  = (_flags),                             \
 104         }
 105 static struct ieee80211_rate __b43_ratetable[] = {
 106         RATETAB_ENT(B43_CCK_RATE_1MB, IEEE80211_RATE_CCK),
 107         RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_CCK_2),
 108         RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_CCK_2),
 109         RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_CCK_2),
 110         RATETAB_ENT(B43_OFDM_RATE_6MB, IEEE80211_RATE_OFDM),
 111         RATETAB_ENT(B43_OFDM_RATE_9MB, IEEE80211_RATE_OFDM),
 112         RATETAB_ENT(B43_OFDM_RATE_12MB, IEEE80211_RATE_OFDM),
 113         RATETAB_ENT(B43_OFDM_RATE_18MB, IEEE80211_RATE_OFDM),
 114         RATETAB_ENT(B43_OFDM_RATE_24MB, IEEE80211_RATE_OFDM),
 115         RATETAB_ENT(B43_OFDM_RATE_36MB, IEEE80211_RATE_OFDM),
 116         RATETAB_ENT(B43_OFDM_RATE_48MB, IEEE80211_RATE_OFDM),
 117         RATETAB_ENT(B43_OFDM_RATE_54MB, IEEE80211_RATE_OFDM),
 118 };
 119
 120 #define b43_a_ratetable         (__b43_ratetable + 4)
 121 #define b43_a_ratetable_size    8
 122 #define b43_b_ratetable         (__b43_ratetable + 0)
 123 #define b43_b_ratetable_size    4
 124 #define b43_g_ratetable         (__b43_ratetable + 0)
 125 #define b43_g_ratetable_size    12
 126
 127 #define CHANTAB_ENT(_chanid, _freq) \
 128         {                                                       \
 129                 .chan   = (_chanid),                            \
 130                 .freq   = (_freq),                              \
 131                 .val    = (_chanid),                            \
 132                 .flag   = IEEE80211_CHAN_W_SCAN |               \
 133                           IEEE80211_CHAN_W_ACTIVE_SCAN |        \
 134                           IEEE80211_CHAN_W_IBSS,                \
 135                 .power_level    = 0xFF,                         \
 136                 .antenna_max    = 0xFF,                         \
 137         }
 138 static struct ieee80211_channel b43_2ghz_chantable[] = {
 139         CHANTAB_ENT(1, 2412),
 140         CHANTAB_ENT(2, 2417),
 141         CHANTAB_ENT(3, 2422),
 142         CHANTAB_ENT(4, 2427),
 143         CHANTAB_ENT(5, 2432),
 144         CHANTAB_ENT(6, 2437),
 145         CHANTAB_ENT(7, 2442),
 146         CHANTAB_ENT(8, 2447),
 147         CHANTAB_ENT(9, 2452),
 148         CHANTAB_ENT(10, 2457),
 149         CHANTAB_ENT(11, 2462),
 150         CHANTAB_ENT(12, 2467),
 151         CHANTAB_ENT(13, 2472),
 152         CHANTAB_ENT(14, 2484),
 153 };
 154 #define b43_2ghz_chantable_size ARRAY_SIZE(b43_2ghz_chantable)
 155
 156 #if 0
 157 static struct ieee80211_channel b43_5ghz_chantable[] = {
 158         CHANTAB_ENT(36, 5180),
 159         CHANTAB_ENT(40, 5200),
 160         CHANTAB_ENT(44, 5220),
 161         CHANTAB_ENT(48, 5240),
 162         CHANTAB_ENT(52, 5260),
 163         CHANTAB_ENT(56, 5280),
 164         CHANTAB_ENT(60, 5300),
 165         CHANTAB_ENT(64, 5320),
 166         CHANTAB_ENT(149, 5745),
 167         CHANTAB_ENT(153, 5765),
 168         CHANTAB_ENT(157, 5785),
 169         CHANTAB_ENT(161, 5805),
 170         CHANTAB_ENT(165, 5825),
 171 };
 172 #define b43_5ghz_chantable_size ARRAY_SIZE(b43_5ghz_chantable)
 173 #endif
 174
 175 static void b43_wireless_core_exit(struct b43_wldev *dev);
 176 static int b43_wireless_core_init(struct b43_wldev *dev);
 177 static void b43_wireless_core_stop(struct b43_wldev *dev);
 178 static int b43_wireless_core_start(struct b43_wldev *dev);
 179
 180 static int b43_ratelimit(struct b43_wl *wl)
 181 {
 182         if (!wl || !wl->current_dev)
 183                 return 1;
 184         if (b43_status(wl->current_dev) < B43_STAT_STARTED)
 185                 return 1;
 186         /* We are up and running.
 187          * Ratelimit the messages to avoid DoS over the net. */
 188         return net_ratelimit();
 189 }
 190
 191 void b43info(struct b43_wl *wl, const char *fmt, ...)
 192 {
 193         va_list args;
 194
 195         if (!b43_ratelimit(wl))
 196                 return;
 197         va_start(args, fmt);
 198         printk(KERN_INFO "b43-%s: ",
 199                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 200         vprintk(fmt, args);
 201         va_end(args);
 202 }
 203
 204 void b43err(struct b43_wl *wl, const char *fmt, ...)
 205 {
 206         va_list args;
 207
 208         if (!b43_ratelimit(wl))
 209                 return;
 210         va_start(args, fmt);
 211         printk(KERN_ERR "b43-%s ERROR: ",
 212                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 213         vprintk(fmt, args);
 214         va_end(args);
 215 }
 216
 217 void b43warn(struct b43_wl *wl, const char *fmt, ...)
 218 {
 219         va_list args;
 220
 221         if (!b43_ratelimit(wl))
 222                 return;
 223         va_start(args, fmt);
 224         printk(KERN_WARNING "b43-%s warning: ",
 225                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 226         vprintk(fmt, args);
 227         va_end(args);
 228 }
 229
 230 #if B43_DEBUG
 231 void b43dbg(struct b43_wl *wl, const char *fmt, ...)
 232 {
 233         va_list args;
 234
 235         va_start(args, fmt);
 236         printk(KERN_DEBUG "b43-%s debug: ",
 237                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 238         vprintk(fmt, args);
 239         va_end(args);
 240 }
 241 #endif /* DEBUG */
 242
 243 static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val)
 244 {
 245         u32 macctl;
 246
 247         B43_WARN_ON(offset % 4 != 0);
 248
 249         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 250         if (macctl & B43_MACCTL_BE)
 251                 val = swab32(val);
 252
 253         b43_write32(dev, B43_MMIO_RAM_CONTROL, offset);
 254         mmiowb();
 255         b43_write32(dev, B43_MMIO_RAM_DATA, val);
 256 }
 257
 258 static inline void b43_shm_control_word(struct b43_wldev *dev,
 259                                         u16 routing, u16 offset)
 260 {
 261         u32 control;
 262
 263         /* "offset" is the WORD offset. */
 264         control = routing;
 265         control <<= 16;
 266         control |= offset;
 267         b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
 268 }
 269
 270 u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 271 {
 272         struct b43_wl *wl = dev->wl;
 273         unsigned long flags;
 274         u32 ret;
 275
 276         spin_lock_irqsave(&wl->shm_lock, flags);
 277         if (routing == B43_SHM_SHARED) {
 278                 B43_WARN_ON(offset & 0x0001);
 279                 if (offset & 0x0003) {
 280                         /* Unaligned access */
 281                         b43_shm_control_word(dev, routing, offset >> 2);
 282                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 283                         ret <<= 16;
 284                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 285                         ret |= b43_read16(dev, B43_MMIO_SHM_DATA);
 286
 287                         goto out;
 288                 }
 289                 offset >>= 2;
 290         }
 291         b43_shm_control_word(dev, routing, offset);
 292         ret = b43_read32(dev, B43_MMIO_SHM_DATA);
 293 out:
 294         spin_unlock_irqrestore(&wl->shm_lock, flags);
 295
 296         return ret;
 297 }
 298
 299 u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset)
 300 {
 301         struct b43_wl *wl = dev->wl;
 302         unsigned long flags;
 303         u16 ret;
 304
 305         spin_lock_irqsave(&wl->shm_lock, flags);
 306         if (routing == B43_SHM_SHARED) {
 307                 B43_WARN_ON(offset & 0x0001);
 308                 if (offset & 0x0003) {
 309                         /* Unaligned access */
 310                         b43_shm_control_word(dev, routing, offset >> 2);
 311                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 312
 313                         goto out;
 314                 }
 315                 offset >>= 2;
 316         }
 317         b43_shm_control_word(dev, routing, offset);
 318         ret = b43_read16(dev, B43_MMIO_SHM_DATA);
 319 out:
 320         spin_unlock_irqrestore(&wl->shm_lock, flags);
 321
 322         return ret;
 323 }
 324
 325 void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 326 {
 327         struct b43_wl *wl = dev->wl;
 328         unsigned long flags;
 329
 330         spin_lock_irqsave(&wl->shm_lock, flags);
 331         if (routing == B43_SHM_SHARED) {
 332                 B43_WARN_ON(offset & 0x0001);
 333                 if (offset & 0x0003) {
 334                         /* Unaligned access */
 335                         b43_shm_control_word(dev, routing, offset >> 2);
 336                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED,
 337                                     (value >> 16) & 0xffff);
 338                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 339                         b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff);
 340                         goto out;
 341                 }
 342                 offset >>= 2;
 343         }
 344         b43_shm_control_word(dev, routing, offset);
 345         b43_write32(dev, B43_MMIO_SHM_DATA, value);
 346 out:
 347         spin_unlock_irqrestore(&wl->shm_lock, flags);
 348 }
 349
 350 void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
 351 {
 352         struct b43_wl *wl = dev->wl;
 353         unsigned long flags;
 354
 355         spin_lock_irqsave(&wl->shm_lock, flags);
 356         if (routing == B43_SHM_SHARED) {
 357                 B43_WARN_ON(offset & 0x0001);
 358                 if (offset & 0x0003) {
 359                         /* Unaligned access */
 360                         b43_shm_control_word(dev, routing, offset >> 2);
 361                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
 362                         goto out;
 363                 }
 364                 offset >>= 2;
 365         }
 366         b43_shm_control_word(dev, routing, offset);
 367         b43_write16(dev, B43_MMIO_SHM_DATA, value);
 368 out:
 369         spin_unlock_irqrestore(&wl->shm_lock, flags);
 370 }
 371
 372 /* Read HostFlags */
 373 u32 b43_hf_read(struct b43_wldev * dev)
 374 {
 375         u32 ret;
 376
 377         ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI);
 378         ret <<= 16;
 379         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO);
 380
 381         return ret;
 382 }
 383
 384 /* Write HostFlags */
 385 void b43_hf_write(struct b43_wldev *dev, u32 value)
 386 {
 387         b43_shm_write16(dev, B43_SHM_SHARED,
 388                         B43_SHM_SH_HOSTFLO, (value & 0x0000FFFF));
 389         b43_shm_write16(dev, B43_SHM_SHARED,
 390                         B43_SHM_SH_HOSTFHI, ((value & 0xFFFF0000) >> 16));
 391 }
 392
 393 void b43_tsf_read(struct b43_wldev *dev, u64 * tsf)
 394 {
 395         /* We need to be careful. As we read the TSF from multiple
 396          * registers, we should take care of register overflows.
 397          * In theory, the whole tsf read process should be atomic.
 398          * We try to be atomic here, by restaring the read process,
 399          * if any of the high registers changed (overflew).
 400          */
 401         if (dev->dev->id.revision >= 3) {
 402                 u32 low, high, high2;
 403
 404                 do {
 405                         high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 406                         low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW);
 407                         high2 = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 408                 } while (unlikely(high != high2));
 409
 410                 *tsf = high;
 411                 *tsf <<= 32;
 412                 *tsf |= low;
 413         } else {
 414                 u64 tmp;
 415                 u16 v0, v1, v2, v3;
 416                 u16 test1, test2, test3;
 417
 418                 do {
 419                         v3 = b43_read16(dev, B43_MMIO_TSF_3);
 420                         v2 = b43_read16(dev, B43_MMIO_TSF_2);
 421                         v1 = b43_read16(dev, B43_MMIO_TSF_1);
 422                         v0 = b43_read16(dev, B43_MMIO_TSF_0);
 423
 424                         test3 = b43_read16(dev, B43_MMIO_TSF_3);
 425                         test2 = b43_read16(dev, B43_MMIO_TSF_2);
 426                         test1 = b43_read16(dev, B43_MMIO_TSF_1);
 427                 } while (v3 != test3 || v2 != test2 || v1 != test1);
 428
 429                 *tsf = v3;
 430                 *tsf <<= 48;
 431                 tmp = v2;
 432                 tmp <<= 32;
 433                 *tsf |= tmp;
 434                 tmp = v1;
 435                 tmp <<= 16;
 436                 *tsf |= tmp;
 437                 *tsf |= v0;
 438         }
 439 }
 440
 441 static void b43_time_lock(struct b43_wldev *dev)
 442 {
 443         u32 macctl;
 444
 445         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 446         macctl |= B43_MACCTL_TBTTHOLD;
 447         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 448         /* Commit the write */
 449         b43_read32(dev, B43_MMIO_MACCTL);
 450 }
 451
 452 static void b43_time_unlock(struct b43_wldev *dev)
 453 {
 454         u32 macctl;
 455
 456         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 457         macctl &= ~B43_MACCTL_TBTTHOLD;
 458         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 459         /* Commit the write */
 460         b43_read32(dev, B43_MMIO_MACCTL);
 461 }
 462
 463 static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
 464 {
 465         /* Be careful with the in-progress timer.
 466          * First zero out the low register, so we have a full
 467          * register-overflow duration to complete the operation.
 468          */
 469         if (dev->dev->id.revision >= 3) {
 470                 u32 lo = (tsf & 0x00000000FFFFFFFFULL);
 471                 u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32;
 472
 473                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, 0);
 474                 mmiowb();
 475                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, hi);
 476                 mmiowb();
 477                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, lo);
 478         } else {
 479                 u16 v0 = (tsf & 0x000000000000FFFFULL);
 480                 u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16;
 481                 u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32;
 482                 u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48;
 483
 484                 b43_write16(dev, B43_MMIO_TSF_0, 0);
 485                 mmiowb();
 486                 b43_write16(dev, B43_MMIO_TSF_3, v3);
 487                 mmiowb();
 488                 b43_write16(dev, B43_MMIO_TSF_2, v2);
 489                 mmiowb();
 490                 b43_write16(dev, B43_MMIO_TSF_1, v1);
 491                 mmiowb();
 492                 b43_write16(dev, B43_MMIO_TSF_0, v0);
 493         }
 494 }
 495
 496 void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
 497 {
 498         b43_time_lock(dev);
 499         b43_tsf_write_locked(dev, tsf);
 500         b43_time_unlock(dev);
 501 }
 502
 503 static
 504 void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac)
 505 {
 506         static const u8 zero_addr[ETH_ALEN] = { 0 };
 507         u16 data;
 508
 509         if (!mac)
 510                 mac = zero_addr;
 511
 512         offset |= 0x0020;
 513         b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset);
 514
 515         data = mac[0];
 516         data |= mac[1] << 8;
 517         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 518         data = mac[2];
 519         data |= mac[3] << 8;
 520         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 521         data = mac[4];
 522         data |= mac[5] << 8;
 523         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 524 }
 525
 526 static void b43_write_mac_bssid_templates(struct b43_wldev *dev)
 527 {
 528         const u8 *mac;
 529         const u8 *bssid;
 530         u8 mac_bssid[ETH_ALEN * 2];
 531         int i;
 532         u32 tmp;
 533
 534         bssid = dev->wl->bssid;
 535         mac = dev->wl->mac_addr;
 536
 537         b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid);
 538
 539         memcpy(mac_bssid, mac, ETH_ALEN);
 540         memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
 541
 542         /* Write our MAC address and BSSID to template ram */
 543         for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
 544                 tmp = (u32) (mac_bssid[i + 0]);
 545                 tmp |= (u32) (mac_bssid[i + 1]) << 8;
 546                 tmp |= (u32) (mac_bssid[i + 2]) << 16;
 547                 tmp |= (u32) (mac_bssid[i + 3]) << 24;
 548                 b43_ram_write(dev, 0x20 + i, tmp);
 549         }
 550 }
 551
 552 static void b43_upload_card_macaddress(struct b43_wldev *dev)
 553 {
 554         b43_write_mac_bssid_templates(dev);
 555         b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr);
 556 }
 557
 558 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 559 {
 560         /* slot_time is in usec. */
 561         if (dev->phy.type != B43_PHYTYPE_G)
 562                 return;
 563         b43_write16(dev, 0x684, 510 + slot_time);
 564         b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
 565 }
 566
 567 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
 568 {
 569         b43_set_slot_time(dev, 9);
 570         dev->short_slot = 1;
 571 }
 572
 573 static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 574 {
 575         b43_set_slot_time(dev, 20);
 576         dev->short_slot = 0;
 577 }
 578
 579 /* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
 580  * Returns the _previously_ enabled IRQ mask.
 581  */
 582 static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask)
 583 {
 584         u32 old_mask;
 585
 586         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 587         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask);
 588
 589         return old_mask;
 590 }
 591
 592 /* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
 593  * Returns the _previously_ enabled IRQ mask.
 594  */
 595 static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask)
 596 {
 597         u32 old_mask;
 598
 599         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 600         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
 601
 602         return old_mask;
 603 }
 604
 605 /* Synchronize IRQ top- and bottom-half.
 606  * IRQs must be masked before calling this.
 607  * This must not be called with the irq_lock held.
 608  */
 609 static void b43_synchronize_irq(struct b43_wldev *dev)
 610 {
 611         synchronize_irq(dev->dev->irq);
 612         tasklet_kill(&dev->isr_tasklet);
 613 }
 614
 615 /* DummyTransmission function, as documented on
 616  * http://bcm-specs.sipsolutions.net/DummyTransmission
 617  */
 618 void b43_dummy_transmission(struct b43_wldev *dev)
 619 {
 620         struct b43_phy *phy = &dev->phy;
 621         unsigned int i, max_loop;
 622         u16 value;
 623         u32 buffer[5] = {
 624                 0x00000000,
 625                 0x00D40000,
 626                 0x00000000,
 627                 0x01000000,
 628                 0x00000000,
 629         };
 630
 631         switch (phy->type) {
 632         case B43_PHYTYPE_A:
 633                 max_loop = 0x1E;
 634                 buffer[0] = 0x000201CC;
 635                 break;
 636         case B43_PHYTYPE_B:
 637         case B43_PHYTYPE_G:
 638                 max_loop = 0xFA;
 639                 buffer[0] = 0x000B846E;
 640                 break;
 641         default:
 642                 B43_WARN_ON(1);
 643                 return;
 644         }
 645
 646         for (i = 0; i < 5; i++)
 647                 b43_ram_write(dev, i * 4, buffer[i]);
 648
 649         /* Commit writes */
 650         b43_read32(dev, B43_MMIO_MACCTL);
 651
 652         b43_write16(dev, 0x0568, 0x0000);
 653         b43_write16(dev, 0x07C0, 0x0000);
 654         value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0);
 655         b43_write16(dev, 0x050C, value);
 656         b43_write16(dev, 0x0508, 0x0000);
 657         b43_write16(dev, 0x050A, 0x0000);
 658         b43_write16(dev, 0x054C, 0x0000);
 659         b43_write16(dev, 0x056A, 0x0014);
 660         b43_write16(dev, 0x0568, 0x0826);
 661         b43_write16(dev, 0x0500, 0x0000);
 662         b43_write16(dev, 0x0502, 0x0030);
 663
 664         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 665                 b43_radio_write16(dev, 0x0051, 0x0017);
 666         for (i = 0x00; i < max_loop; i++) {
 667                 value = b43_read16(dev, 0x050E);
 668                 if (value & 0x0080)
 669                         break;
 670                 udelay(10);
 671         }
 672         for (i = 0x00; i < 0x0A; i++) {
 673                 value = b43_read16(dev, 0x050E);
 674                 if (value & 0x0400)
 675                         break;
 676                 udelay(10);
 677         }
 678         for (i = 0x00; i < 0x0A; i++) {
 679                 value = b43_read16(dev, 0x0690);
 680                 if (!(value & 0x0100))
 681                         break;
 682                 udelay(10);
 683         }
 684         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 685                 b43_radio_write16(dev, 0x0051, 0x0037);
 686 }
 687
 688 static void key_write(struct b43_wldev *dev,
 689                       u8 index, u8 algorithm, const u8 * key)
 690 {
 691         unsigned int i;
 692         u32 offset;
 693         u16 value;
 694         u16 kidx;
 695
 696         /* Key index/algo block */
 697         kidx = b43_kidx_to_fw(dev, index);
 698         value = ((kidx << 4) | algorithm);
 699         b43_shm_write16(dev, B43_SHM_SHARED,
 700                         B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value);
 701
 702         /* Write the key to the Key Table Pointer offset */
 703         offset = dev->ktp + (index * B43_SEC_KEYSIZE);
 704         for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
 705                 value = key[i];
 706                 value |= (u16) (key[i + 1]) << 8;
 707                 b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value);
 708         }
 709 }
 710
 711 static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr)
 712 {
 713         u32 addrtmp[2] = { 0, 0, };
 714         u8 per_sta_keys_start = 8;
 715
 716         if (b43_new_kidx_api(dev))
 717                 per_sta_keys_start = 4;
 718
 719         B43_WARN_ON(index < per_sta_keys_start);
 720         /* We have two default TX keys and possibly two default RX keys.
 721          * Physical mac 0 is mapped to physical key 4 or 8, depending
 722          * on the firmware version.
 723          * So we must adjust the index here.
 724          */
 725         index -= per_sta_keys_start;
 726
 727         if (addr) {
 728                 addrtmp[0] = addr[0];
 729                 addrtmp[0] |= ((u32) (addr[1]) << 8);
 730                 addrtmp[0] |= ((u32) (addr[2]) << 16);
 731                 addrtmp[0] |= ((u32) (addr[3]) << 24);
 732                 addrtmp[1] = addr[4];
 733                 addrtmp[1] |= ((u32) (addr[5]) << 8);
 734         }
 735
 736         if (dev->dev->id.revision >= 5) {
 737                 /* Receive match transmitter address mechanism */
 738                 b43_shm_write32(dev, B43_SHM_RCMTA,
 739                                 (index * 2) + 0, addrtmp[0]);
 740                 b43_shm_write16(dev, B43_SHM_RCMTA,
 741                                 (index * 2) + 1, addrtmp[1]);
 742         } else {
 743                 /* RXE (Receive Engine) and
 744                  * PSM (Programmable State Machine) mechanism
 745                  */
 746                 if (index < 8) {
 747                         /* TODO write to RCM 16, 19, 22 and 25 */
 748                 } else {
 749                         b43_shm_write32(dev, B43_SHM_SHARED,
 750                                         B43_SHM_SH_PSM + (index * 6) + 0,
 751                                         addrtmp[0]);
 752                         b43_shm_write16(dev, B43_SHM_SHARED,
 753                                         B43_SHM_SH_PSM + (index * 6) + 4,
 754                                         addrtmp[1]);
 755                 }
 756         }
 757 }
 758
 759 static void do_key_write(struct b43_wldev *dev,
 760                          u8 index, u8 algorithm,
 761                          const u8 * key, size_t key_len, const u8 * mac_addr)
 762 {
 763         u8 buf[B43_SEC_KEYSIZE] = { 0, };
 764         u8 per_sta_keys_start = 8;
 765
 766         if (b43_new_kidx_api(dev))
 767                 per_sta_keys_start = 4;
 768
 769         B43_WARN_ON(index >= dev->max_nr_keys);
 770         B43_WARN_ON(key_len > B43_SEC_KEYSIZE);
 771
 772         if (index >= per_sta_keys_start)
 773                 keymac_write(dev, index, NULL); /* First zero out mac. */
 774         if (key)
 775                 memcpy(buf, key, key_len);
 776         key_write(dev, index, algorithm, buf);
 777         if (index >= per_sta_keys_start)
 778                 keymac_write(dev, index, mac_addr);
 779
 780         dev->key[index].algorithm = algorithm;
 781 }
 782
 783 static int b43_key_write(struct b43_wldev *dev,
 784                          int index, u8 algorithm,
 785                          const u8 * key, size_t key_len,
 786                          const u8 * mac_addr,
 787                          struct ieee80211_key_conf *keyconf)
 788 {
 789         int i;
 790         int sta_keys_start;
 791
 792         if (key_len > B43_SEC_KEYSIZE)
 793                 return -EINVAL;
 794         for (i = 0; i < dev->max_nr_keys; i++) {
 795                 /* Check that we don't already have this key. */
 796                 B43_WARN_ON(dev->key[i].keyconf == keyconf);
 797         }
 798         if (index < 0) {
 799                 /* Either pairwise key or address is 00:00:00:00:00:00
 800                  * for transmit-only keys. Search the index. */
 801                 if (b43_new_kidx_api(dev))
 802                         sta_keys_start = 4;
 803                 else
 804                         sta_keys_start = 8;
 805                 for (i = sta_keys_start; i < dev->max_nr_keys; i++) {
 806                         if (!dev->key[i].keyconf) {
 807                                 /* found empty */
 808                                 index = i;
 809                                 break;
 810                         }
 811                 }
 812                 if (index < 0) {
 813                         b43err(dev->wl, "Out of hardware key memory\n");
 814                         return -ENOSPC;
 815                 }
 816         } else
 817                 B43_WARN_ON(index > 3);
 818
 819         do_key_write(dev, index, algorithm, key, key_len, mac_addr);
 820         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 821                 /* Default RX key */
 822                 B43_WARN_ON(mac_addr);
 823                 do_key_write(dev, index + 4, algorithm, key, key_len, NULL);
 824         }
 825         keyconf->hw_key_idx = index;
 826         dev->key[index].keyconf = keyconf;
 827
 828         return 0;
 829 }
 830
 831 static int b43_key_clear(struct b43_wldev *dev, int index)
 832 {
 833         if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys)))
 834                 return -EINVAL;
 835         do_key_write(dev, index, B43_SEC_ALGO_NONE,
 836                      NULL, B43_SEC_KEYSIZE, NULL);
 837         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 838                 do_key_write(dev, index + 4, B43_SEC_ALGO_NONE,
 839                              NULL, B43_SEC_KEYSIZE, NULL);
 840         }
 841         dev->key[index].keyconf = NULL;
 842
 843         return 0;
 844 }
 845
 846 static void b43_clear_keys(struct b43_wldev *dev)
 847 {
 848         int i;
 849
 850         for (i = 0; i < dev->max_nr_keys; i++)
 851                 b43_key_clear(dev, i);
 852 }
 853
 854 void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 855 {
 856         u32 macctl;
 857         u16 ucstat;
 858         bool hwps;
 859         bool awake;
 860         int i;
 861
 862         B43_WARN_ON((ps_flags & B43_PS_ENABLED) &&
 863                     (ps_flags & B43_PS_DISABLED));
 864         B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP));
 865
 866         if (ps_flags & B43_PS_ENABLED) {
 867                 hwps = 1;
 868         } else if (ps_flags & B43_PS_DISABLED) {
 869                 hwps = 0;
 870         } else {
 871                 //TODO: If powersave is not off and FIXME is not set and we are not in adhoc
 872                 //      and thus is not an AP and we are associated, set bit 25
 873         }
 874         if (ps_flags & B43_PS_AWAKE) {
 875                 awake = 1;
 876         } else if (ps_flags & B43_PS_ASLEEP) {
 877                 awake = 0;
 878         } else {
 879                 //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
 880                 //      or we are associated, or FIXME, or the latest PS-Poll packet sent was
 881                 //      successful, set bit26
 882         }
 883
 884 /* FIXME: For now we force awake-on and hwps-off */
 885         hwps = 0;
 886         awake = 1;
 887
 888         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 889         if (hwps)
 890                 macctl |= B43_MACCTL_HWPS;
 891         else
 892                 macctl &= ~B43_MACCTL_HWPS;
 893         if (awake)
 894                 macctl |= B43_MACCTL_AWAKE;
 895         else
 896                 macctl &= ~B43_MACCTL_AWAKE;
 897         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 898         /* Commit write */
 899         b43_read32(dev, B43_MMIO_MACCTL);
 900         if (awake && dev->dev->id.revision >= 5) {
 901                 /* Wait for the microcode to wake up. */
 902                 for (i = 0; i < 100; i++) {
 903                         ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
 904                                                 B43_SHM_SH_UCODESTAT);
 905                         if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP)
 906                                 break;
 907                         udelay(10);
 908                 }
 909         }
 910 }
 911
 912 /* Turn the Analog ON/OFF */
 913 static void b43_switch_analog(struct b43_wldev *dev, int on)
 914 {
 915         b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
 916 }
 917
 918 void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 919 {
 920         u32 tmslow;
 921         u32 macctl;
 922
 923         flags |= B43_TMSLOW_PHYCLKEN;
 924         flags |= B43_TMSLOW_PHYRESET;
 925         ssb_device_enable(dev->dev, flags);
 926         msleep(2);              /* Wait for the PLL to turn on. */
 927
 928         /* Now take the PHY out of Reset again */
 929         tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
 930         tmslow |= SSB_TMSLOW_FGC;
 931         tmslow &= ~B43_TMSLOW_PHYRESET;
 932         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
 933         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
 934         msleep(1);
 935         tmslow &= ~SSB_TMSLOW_FGC;
 936         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
 937         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
 938         msleep(1);
 939
 940         /* Turn Analog ON */
 941         b43_switch_analog(dev, 1);
 942
 943         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 944         macctl &= ~B43_MACCTL_GMODE;
 945         if (flags & B43_TMSLOW_GMODE)
 946                 macctl |= B43_MACCTL_GMODE;
 947         macctl |= B43_MACCTL_IHR_ENABLED;
 948         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 949 }
 950
 951 static void handle_irq_transmit_status(struct b43_wldev *dev)
 952 {
 953         u32 v0, v1;
 954         u16 tmp;
 955         struct b43_txstatus stat;
 956
 957         while (1) {
 958                 v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0);
 959                 if (!(v0 & 0x00000001))
 960                         break;
 961                 v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1);
 962
 963                 stat.cookie = (v0 >> 16);
 964                 stat.seq = (v1 & 0x0000FFFF);
 965                 stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
 966                 tmp = (v0 & 0x0000FFFF);
 967                 stat.frame_count = ((tmp & 0xF000) >> 12);
 968                 stat.rts_count = ((tmp & 0x0F00) >> 8);
 969                 stat.supp_reason = ((tmp & 0x001C) >> 2);
 970                 stat.pm_indicated = !!(tmp & 0x0080);
 971                 stat.intermediate = !!(tmp & 0x0040);
 972                 stat.for_ampdu = !!(tmp & 0x0020);
 973                 stat.acked = !!(tmp & 0x0002);
 974
 975                 b43_handle_txstatus(dev, &stat);
 976         }
 977 }
 978
 979 static void drain_txstatus_queue(struct b43_wldev *dev)
 980 {
 981         u32 dummy;
 982
 983         if (dev->dev->id.revision < 5)
 984                 return;
 985         /* Read all entries from the microcode TXstatus FIFO
 986          * and throw them away.
 987          */
 988         while (1) {
 989                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0);
 990                 if (!(dummy & 0x00000001))
 991                         break;
 992                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1);
 993         }
 994 }
 995
 996 static u32 b43_jssi_read(struct b43_wldev *dev)
 997 {
 998         u32 val = 0;
 999
1000         val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A);
1001         val <<= 16;
1002         val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088);
1003
1004         return val;
1005 }
1006
1007 static void b43_jssi_write(struct b43_wldev *dev, u32 jssi)
1008 {
1009         b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF));
1010         b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16);
1011 }
1012
1013 static void b43_generate_noise_sample(struct b43_wldev *dev)
1014 {
1015         b43_jssi_write(dev, 0x7F7F7F7F);
1016         b43_write32(dev, B43_MMIO_MACCMD,
1017                     b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
1018         B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel);
1019 }
1020
1021 static void b43_calculate_link_quality(struct b43_wldev *dev)
1022 {
1023         /* Top half of Link Quality calculation. */
1024
1025         if (dev->noisecalc.calculation_running)
1026                 return;
1027         dev->noisecalc.channel_at_start = dev->phy.channel;
1028         dev->noisecalc.calculation_running = 1;
1029         dev->noisecalc.nr_samples = 0;
1030
1031         b43_generate_noise_sample(dev);
1032 }
1033
1034 static void handle_irq_noise(struct b43_wldev *dev)
1035 {
1036         struct b43_phy *phy = &dev->phy;
1037         u16 tmp;
1038         u8 noise[4];
1039         u8 i, j;
1040         s32 average;
1041
1042         /* Bottom half of Link Quality calculation. */
1043
1044         B43_WARN_ON(!dev->noisecalc.calculation_running);
1045         if (dev->noisecalc.channel_at_start != phy->channel)
1046                 goto drop_calculation;
1047         *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
1048         if (noise[0] == 0x7F || noise[1] == 0x7F ||
1049             noise[2] == 0x7F || noise[3] == 0x7F)
1050                 goto generate_new;
1051
1052         /* Get the noise samples. */
1053         B43_WARN_ON(dev->noisecalc.nr_samples >= 8);
1054         i = dev->noisecalc.nr_samples;
1055         noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1056         noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1057         noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1058         noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1059         dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
1060         dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
1061         dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
1062         dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
1063         dev->noisecalc.nr_samples++;
1064         if (dev->noisecalc.nr_samples == 8) {
1065                 /* Calculate the Link Quality by the noise samples. */
1066                 average = 0;
1067                 for (i = 0; i < 8; i++) {
1068                         for (j = 0; j < 4; j++)
1069                                 average += dev->noisecalc.samples[i][j];
1070                 }
1071                 average /= (8 * 4);
1072                 average *= 125;
1073                 average += 64;
1074                 average /= 128;
1075                 tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C);
1076                 tmp = (tmp / 128) & 0x1F;
1077                 if (tmp >= 8)
1078                         average += 2;
1079                 else
1080                         average -= 25;
1081                 if (tmp == 8)
1082                         average -= 72;
1083                 else
1084                         average -= 48;
1085
1086                 dev->stats.link_noise = average;
1087               drop_calculation:
1088                 dev->noisecalc.calculation_running = 0;
1089                 return;
1090         }
1091       generate_new:
1092         b43_generate_noise_sample(dev);
1093 }
1094
1095 static void handle_irq_tbtt_indication(struct b43_wldev *dev)
1096 {
1097         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) {
1098                 ///TODO: PS TBTT
1099         } else {
1100                 if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
1101                         b43_power_saving_ctl_bits(dev, 0);
1102         }
1103         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
1104                 dev->dfq_valid = 1;
1105 }
1106
1107 static void handle_irq_atim_end(struct b43_wldev *dev)
1108 {
1109         if (dev->dfq_valid) {
1110                 b43_write32(dev, B43_MMIO_MACCMD,
1111                             b43_read32(dev, B43_MMIO_MACCMD)
1112                             | B43_MACCMD_DFQ_VALID);
1113                 dev->dfq_valid = 0;
1114         }
1115 }
1116
1117 static void handle_irq_pmq(struct b43_wldev *dev)
1118 {
1119         u32 tmp;
1120
1121         //TODO: AP mode.
1122
1123         while (1) {
1124                 tmp = b43_read32(dev, B43_MMIO_PS_STATUS);
1125                 if (!(tmp & 0x00000008))
1126                         break;
1127         }
1128         /* 16bit write is odd, but correct. */
1129         b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002);
1130 }
1131
1132 static void b43_write_template_common(struct b43_wldev *dev,
1133                                       const u8 * data, u16 size,
1134                                       u16 ram_offset,
1135                                       u16 shm_size_offset, u8 rate)
1136 {
1137         u32 i, tmp;
1138         struct b43_plcp_hdr4 plcp;
1139
1140         plcp.data = 0;
1141         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
1142         b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
1143         ram_offset += sizeof(u32);
1144         /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
1145          * So leave the first two bytes of the next write blank.
1146          */
1147         tmp = (u32) (data[0]) << 16;
1148         tmp |= (u32) (data[1]) << 24;
1149         b43_ram_write(dev, ram_offset, tmp);
1150         ram_offset += sizeof(u32);
1151         for (i = 2; i < size; i += sizeof(u32)) {
1152                 tmp = (u32) (data[i + 0]);
1153                 if (i + 1 < size)
1154                         tmp |= (u32) (data[i + 1]) << 8;
1155                 if (i + 2 < size)
1156                         tmp |= (u32) (data[i + 2]) << 16;
1157                 if (i + 3 < size)
1158                         tmp |= (u32) (data[i + 3]) << 24;
1159                 b43_ram_write(dev, ram_offset + i - 2, tmp);
1160         }
1161         b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset,
1162                         size + sizeof(struct b43_plcp_hdr6));
1163 }
1164
1165 static void b43_write_beacon_template(struct b43_wldev *dev,
1166                                       u16 ram_offset,
1167                                       u16 shm_size_offset, u8 rate)
1168 {
1169         unsigned int i, len, variable_len;
1170         const struct ieee80211_mgmt *bcn;
1171         const u8 *ie;
1172         bool tim_found = 0;
1173
1174         bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
1175         len = min((size_t) dev->wl->current_beacon->len,
1176                   0x200 - sizeof(struct b43_plcp_hdr6));
1177
1178         b43_write_template_common(dev, (const u8 *)bcn,
1179                                   len, ram_offset, shm_size_offset, rate);
1180
1181         /* Find the position of the TIM and the DTIM_period value
1182          * and write them to SHM. */
1183         ie = bcn->u.beacon.variable;
1184         variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
1185         for (i = 0; i < variable_len - 2; ) {
1186                 uint8_t ie_id, ie_len;
1187
1188                 ie_id = ie[i];
1189                 ie_len = ie[i + 1];
1190                 if (ie_id == 5) {
1191                         u16 tim_position;
1192                         u16 dtim_period;
1193                         /* This is the TIM Information Element */
1194
1195                         /* Check whether the ie_len is in the beacon data range. */
1196                         if (variable_len < ie_len + 2 + i)
1197                                 break;
1198                         /* A valid TIM is at least 4 bytes long. */
1199                         if (ie_len < 4)
1200                                 break;
1201                         tim_found = 1;
1202
1203                         tim_position = sizeof(struct b43_plcp_hdr6);
1204                         tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable);
1205                         tim_position += i;
1206
1207                         dtim_period = ie[i + 3];
1208
1209                         b43_shm_write16(dev, B43_SHM_SHARED,
1210                                         B43_SHM_SH_TIMBPOS, tim_position);
1211                         b43_shm_write16(dev, B43_SHM_SHARED,
1212                                         B43_SHM_SH_DTIMPER, dtim_period);
1213                         break;
1214                 }
1215                 i += ie_len + 2;
1216         }
1217         if (!tim_found) {
1218                 b43warn(dev->wl, "Did not find a valid TIM IE in "
1219                         "the beacon template packet. AP or IBSS operation "
1220                         "may be broken.\n");
1221         }
1222 }
1223
1224 static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
1225                                       u16 shm_offset, u16 size, u8 rate)
1226 {
1227         struct b43_plcp_hdr4 plcp;
1228         u32 tmp;
1229         __le16 dur;
1230
1231         plcp.data = 0;
1232         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
1233         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1234                                                dev->wl->vif, size,
1235                                                B43_RATE_TO_BASE100KBPS(rate));
1236         /* Write PLCP in two parts and timing for packet transfer */
1237         tmp = le32_to_cpu(plcp.data);
1238         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF);
1239         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16);
1240         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur));
1241 }
1242
1243 /* Instead of using custom probe response template, this function
1244  * just patches custom beacon template by:
1245  * 1) Changing packet type
1246  * 2) Patching duration field
1247  * 3) Stripping TIM
1248  */
1249 static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
1250                                           u16 *dest_size, u8 rate)
1251 {
1252         const u8 *src_data;
1253         u8 *dest_data;
1254         u16 src_size, elem_size, src_pos, dest_pos;
1255         __le16 dur;
1256         struct ieee80211_hdr *hdr;
1257         size_t ie_start;
1258
1259         src_size = dev->wl->current_beacon->len;
1260         src_data = (const u8 *)dev->wl->current_beacon->data;
1261
1262         /* Get the start offset of the variable IEs in the packet. */
1263         ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
1264         B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable));
1265
1266         if (B43_WARN_ON(src_size < ie_start))
1267                 return NULL;
1268
1269         dest_data = kmalloc(src_size, GFP_ATOMIC);
1270         if (unlikely(!dest_data))
1271                 return NULL;
1272
1273         /* Copy the static data and all Information Elements, except the TIM. */
1274         memcpy(dest_data, src_data, ie_start);
1275         src_pos = ie_start;
1276         dest_pos = ie_start;
1277         for ( ; src_pos < src_size - 2; src_pos += elem_size) {
1278                 elem_size = src_data[src_pos + 1] + 2;
1279                 if (src_data[src_pos] == 5) {
1280                         /* This is the TIM. */
1281                         continue;
1282                 }
1283                 memcpy(dest_data + dest_pos, src_data + src_pos,
1284                        elem_size);
1285                 dest_pos += elem_size;
1286         }
1287         *dest_size = dest_pos;
1288         hdr = (struct ieee80211_hdr *)dest_data;
1289
1290         /* Set the frame control. */
1291         hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1292                                          IEEE80211_STYPE_PROBE_RESP);
1293         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1294                                                dev->wl->vif, *dest_size,
1295                                                B43_RATE_TO_BASE100KBPS(rate));
1296         hdr->duration_id = dur;
1297
1298         return dest_data;
1299 }
1300
1301 static void b43_write_probe_resp_template(struct b43_wldev *dev,
1302                                           u16 ram_offset,
1303                                           u16 shm_size_offset, u8 rate)
1304 {
1305         const u8 *probe_resp_data;
1306         u16 size;
1307
1308         size = dev->wl->current_beacon->len;
1309         probe_resp_data = b43_generate_probe_resp(dev, &size, rate);
1310         if (unlikely(!probe_resp_data))
1311                 return;
1312
1313         /* Looks like PLCP headers plus packet timings are stored for
1314          * all possible basic rates
1315          */
1316         b43_write_probe_resp_plcp(dev, 0x31A, size, B43_CCK_RATE_1MB);
1317         b43_write_probe_resp_plcp(dev, 0x32C, size, B43_CCK_RATE_2MB);
1318         b43_write_probe_resp_plcp(dev, 0x33E, size, B43_CCK_RATE_5MB);
1319         b43_write_probe_resp_plcp(dev, 0x350, size, B43_CCK_RATE_11MB);
1320
1321         size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6));
1322         b43_write_template_common(dev, probe_resp_data,
1323                                   size, ram_offset, shm_size_offset, rate);
1324         kfree(probe_resp_data);
1325 }
1326
1327 /* Asynchronously update the packet templates in template RAM.
1328  * Locking: Requires wl->irq_lock to be locked. */
1329 static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon)
1330 {
1331         /* This is the top half of the ansynchronous beacon update.
1332          * The bottom half is the beacon IRQ.
1333          * Beacon update must be asynchronous to avoid sending an
1334          * invalid beacon. This can happen for example, if the firmware
1335          * transmits a beacon while we are updating it. */
1336
1337         if (wl->current_beacon)
1338                 dev_kfree_skb_any(wl->current_beacon);
1339         wl->current_beacon = beacon;
1340         wl->beacon0_uploaded = 0;
1341         wl->beacon1_uploaded = 0;
1342 }
1343
1344 static void b43_set_ssid(struct b43_wldev *dev, const u8 * ssid, u8 ssid_len)
1345 {
1346         u32 tmp;
1347         u16 i, len;
1348
1349         len = min((u16) ssid_len, (u16) 0x100);
1350         for (i = 0; i < len; i += sizeof(u32)) {
1351                 tmp = (u32) (ssid[i + 0]);
1352                 if (i + 1 < len)
1353                         tmp |= (u32) (ssid[i + 1]) << 8;
1354                 if (i + 2 < len)
1355                         tmp |= (u32) (ssid[i + 2]) << 16;
1356                 if (i + 3 < len)
1357                         tmp |= (u32) (ssid[i + 3]) << 24;
1358                 b43_shm_write32(dev, B43_SHM_SHARED, 0x380 + i, tmp);
1359         }
1360         b43_shm_write16(dev, B43_SHM_SHARED, 0x48, len);
1361 }
1362
1363 static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
1364 {
1365         b43_time_lock(dev);
1366         if (dev->dev->id.revision >= 3) {
1367                 b43_write32(dev, 0x188, (beacon_int << 16));
1368         } else {
1369                 b43_write16(dev, 0x606, (beacon_int >> 6));
1370                 b43_write16(dev, 0x610, beacon_int);
1371         }
1372         b43_time_unlock(dev);
1373 }
1374
1375 static void handle_irq_beacon(struct b43_wldev *dev)
1376 {
1377         struct b43_wl *wl = dev->wl;
1378         u32 cmd;
1379
1380         if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
1381                 return;
1382
1383         /* This is the bottom half of the asynchronous beacon update. */
1384
1385         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1386         if (!(cmd & B43_MACCMD_BEACON0_VALID)) {
1387                 if (!wl->beacon0_uploaded) {
1388                         b43_write_beacon_template(dev, 0x68, 0x18,
1389                                                   B43_CCK_RATE_1MB);
1390                         b43_write_probe_resp_template(dev, 0x268, 0x4A,
1391                                                       B43_CCK_RATE_11MB);
1392                         wl->beacon0_uploaded = 1;
1393                 }
1394                 cmd |= B43_MACCMD_BEACON0_VALID;
1395         }
1396         if (!(cmd & B43_MACCMD_BEACON1_VALID)) {
1397                 if (!wl->beacon1_uploaded) {
1398                         b43_write_beacon_template(dev, 0x468, 0x1A,
1399                                                   B43_CCK_RATE_1MB);
1400                         wl->beacon1_uploaded = 1;
1401                 }
1402                 cmd |= B43_MACCMD_BEACON1_VALID;
1403         }
1404         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1405 }
1406
1407 static void handle_irq_ucode_debug(struct b43_wldev *dev)
1408 {
1409         //TODO
1410 }
1411
1412 /* Interrupt handler bottom-half */
1413 static void b43_interrupt_tasklet(struct b43_wldev *dev)
1414 {
1415         u32 reason;
1416         u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
1417         u32 merged_dma_reason = 0;
1418         int i;
1419         unsigned long flags;
1420
1421         spin_lock_irqsave(&dev->wl->irq_lock, flags);
1422
1423         B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED);
1424
1425         reason = dev->irq_reason;
1426         for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
1427                 dma_reason[i] = dev->dma_reason[i];
1428                 merged_dma_reason |= dma_reason[i];
1429         }
1430
1431         if (unlikely(reason & B43_IRQ_MAC_TXERR))
1432                 b43err(dev->wl, "MAC transmission error\n");
1433
1434         if (unlikely(reason & B43_IRQ_PHY_TXERR)) {
1435                 b43err(dev->wl, "PHY transmission error\n");
1436                 rmb();
1437                 if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) {
1438                         atomic_set(&dev->phy.txerr_cnt,
1439                                    B43_PHY_TX_BADNESS_LIMIT);
1440                         b43err(dev->wl, "Too many PHY TX errors, "
1441                                         "restarting the controller\n");
1442                         b43_controller_restart(dev, "PHY TX errors");
1443                 }
1444         }
1445
1446         if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK |
1447                                           B43_DMAIRQ_NONFATALMASK))) {
1448                 if (merged_dma_reason & B43_DMAIRQ_FATALMASK) {
1449                         b43err(dev->wl, "Fatal DMA error: "
1450                                "0x%08X, 0x%08X, 0x%08X, "
1451                                "0x%08X, 0x%08X, 0x%08X\n",
1452                                dma_reason[0], dma_reason[1],
1453                                dma_reason[2], dma_reason[3],
1454                                dma_reason[4], dma_reason[5]);
1455                         b43_controller_restart(dev, "DMA error");
1456                         mmiowb();
1457                         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1458                         return;
1459                 }
1460                 if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
1461                         b43err(dev->wl, "DMA error: "
1462                                "0x%08X, 0x%08X, 0x%08X, "
1463                                "0x%08X, 0x%08X, 0x%08X\n",
1464                                dma_reason[0], dma_reason[1],
1465                                dma_reason[2], dma_reason[3],
1466                                dma_reason[4], dma_reason[5]);
1467                 }
1468         }
1469
1470         if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
1471                 handle_irq_ucode_debug(dev);
1472         if (reason & B43_IRQ_TBTT_INDI)
1473                 handle_irq_tbtt_indication(dev);
1474         if (reason & B43_IRQ_ATIM_END)
1475                 handle_irq_atim_end(dev);
1476         if (reason & B43_IRQ_BEACON)
1477                 handle_irq_beacon(dev);
1478         if (reason & B43_IRQ_PMQ)
1479                 handle_irq_pmq(dev);
1480         if (reason & B43_IRQ_TXFIFO_FLUSH_OK)
1481                 ;/* TODO */
1482         if (reason & B43_IRQ_NOISESAMPLE_OK)
1483                 handle_irq_noise(dev);
1484
1485         /* Check the DMA reason registers for received data. */
1486         if (dma_reason[0] & B43_DMAIRQ_RX_DONE)
1487                 b43_dma_rx(dev->dma.rx_ring0);
1488         if (dma_reason[3] & B43_DMAIRQ_RX_DONE)
1489                 b43_dma_rx(dev->dma.rx_ring3);
1490         B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE);
1491         B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE);
1492         B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE);
1493         B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE);
1494
1495         if (reason & B43_IRQ_TX_OK)
1496                 handle_irq_transmit_status(dev);
1497
1498         b43_interrupt_enable(dev, dev->irq_savedstate);
1499         mmiowb();
1500         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1501 }
1502
1503 static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
1504 {
1505         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
1506
1507         b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
1508         b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
1509         b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
1510         b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
1511         b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
1512         b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
1513 }
1514
1515 /* Interrupt handler top-half */
1516 static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
1517 {
1518         irqreturn_t ret = IRQ_NONE;
1519         struct b43_wldev *dev = dev_id;
1520         u32 reason;
1521
1522         if (!dev)
1523                 return IRQ_NONE;
1524
1525         spin_lock(&dev->wl->irq_lock);
1526
1527         if (b43_status(dev) < B43_STAT_STARTED)
1528                 goto out;
1529         reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
1530         if (reason == 0xffffffff)       /* shared IRQ */
1531                 goto out;
1532         ret = IRQ_HANDLED;
1533         reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
1534         if (!reason)
1535                 goto out;
1536
1537         dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
1538             & 0x0001DC00;
1539         dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
1540             & 0x0000DC00;
1541         dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
1542             & 0x0000DC00;
1543         dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON)
1544             & 0x0001DC00;
1545         dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
1546             & 0x0000DC00;
1547         dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
1548             & 0x0000DC00;
1549
1550         b43_interrupt_ack(dev, reason);
1551         /* disable all IRQs. They are enabled again in the bottom half. */
1552         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
1553         /* save the reason code and call our bottom half. */
1554         dev->irq_reason = reason;
1555         tasklet_schedule(&dev->isr_tasklet);
1556       out:
1557         mmiowb();
1558         spin_unlock(&dev->wl->irq_lock);
1559
1560         return ret;
1561 }
1562
1563 static void do_release_fw(struct b43_firmware_file *fw)
1564 {
1565         release_firmware(fw->data);
1566         fw->data = NULL;
1567         fw->filename = NULL;
1568 }
1569
1570 static void b43_release_firmware(struct b43_wldev *dev)
1571 {
1572         do_release_fw(&dev->fw.ucode);
1573         do_release_fw(&dev->fw.pcm);
1574         do_release_fw(&dev->fw.initvals);
1575         do_release_fw(&dev->fw.initvals_band);
1576 }
1577
1578 static void b43_print_fw_helptext(struct b43_wl *wl, bool error)
1579 {
1580         const char *text;
1581
1582         text = "You must go to "
1583                "http://linuxwireless.org/en/users/Drivers/b43#devicefirmware "
1584                "and download the latest firmware (version 4).\n";
1585         if (error)
1586                 b43err(wl, text);
1587         else
1588                 b43warn(wl, text);
1589 }
1590
1591 static int do_request_fw(struct b43_wldev *dev,
1592                          const char *name,
1593                          struct b43_firmware_file *fw)
1594 {
1595         char path[sizeof(modparam_fwpostfix) + 32];
1596         const struct firmware *blob;
1597         struct b43_fw_header *hdr;
1598         u32 size;
1599         int err;
1600
1601         if (!name) {
1602                 /* Don't fetch anything. Free possibly cached firmware. */
1603                 do_release_fw(fw);
1604                 return 0;
1605         }
1606         if (fw->filename) {
1607                 if (strcmp(fw->filename, name) == 0)
1608                         return 0; /* Already have this fw. */
1609                 /* Free the cached firmware first. */
1610                 do_release_fw(fw);
1611         }
1612
1613         snprintf(path, ARRAY_SIZE(path),
1614                  "b43%s/%s.fw",
1615                  modparam_fwpostfix, name);
1616         err = request_firmware(&blob, path, dev->dev->dev);
1617         if (err) {
1618                 b43err(dev->wl, "Firmware file \"%s\" not found "
1619                        "or load failed.\n", path);
1620                 return err;
1621         }
1622         if (blob->size < sizeof(struct b43_fw_header))
1623                 goto err_format;
1624         hdr = (struct b43_fw_header *)(blob->data);
1625         switch (hdr->type) {
1626         case B43_FW_TYPE_UCODE:
1627         case B43_FW_TYPE_PCM:
1628                 size = be32_to_cpu(hdr->size);
1629                 if (size != blob->size - sizeof(struct b43_fw_header))
1630                         goto err_format;
1631                 /* fallthrough */
1632         case B43_FW_TYPE_IV:
1633                 if (hdr->ver != 1)
1634                         goto err_format;
1635                 break;
1636         default:
1637                 goto err_format;
1638         }
1639
1640         fw->data = blob;
1641         fw->filename = name;
1642
1643         return 0;
1644
1645 err_format:
1646         b43err(dev->wl, "Firmware file \"%s\" format error.\n", path);
1647         release_firmware(blob);
1648
1649         return -EPROTO;
1650 }
1651
1652 static int b43_request_firmware(struct b43_wldev *dev)
1653 {
1654         struct b43_firmware *fw = &dev->fw;
1655         const u8 rev = dev->dev->id.revision;
1656         const char *filename;
1657         u32 tmshigh;
1658         int err;
1659
1660         /* Get microcode */
1661         tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
1662         if ((rev >= 5) && (rev <= 10))
1663                 filename = "ucode5";
1664         else if ((rev >= 11) && (rev <= 12))
1665                 filename = "ucode11";
1666         else if (rev >= 13)
1667                 filename = "ucode13";
1668         else
1669                 goto err_no_ucode;
1670         err = do_request_fw(dev, filename, &fw->ucode);
1671         if (err)
1672                 goto err_load;
1673
1674         /* Get PCM code */
1675         if ((rev >= 5) && (rev <= 10))
1676                 filename = "pcm5";
1677         else if (rev >= 11)
1678                 filename = NULL;
1679         else
1680                 goto err_no_pcm;
1681         err = do_request_fw(dev, filename, &fw->pcm);
1682         if (err)
1683                 goto err_load;
1684
1685         /* Get initvals */
1686         switch (dev->phy.type) {
1687         case B43_PHYTYPE_A:
1688                 if ((rev >= 5) && (rev <= 10)) {
1689                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
1690                                 filename = "a0g1initvals5";
1691                         else
1692                                 filename = "a0g0initvals5";
1693                 } else
1694                         goto err_no_initvals;
1695                 break;
1696         case B43_PHYTYPE_G:
1697                 if ((rev >= 5) && (rev <= 10))
1698                         filename = "b0g0initvals5";
1699                 else if (rev >= 13)
1700                         filename = "lp0initvals13";
1701                 else
1702                         goto err_no_initvals;
1703                 break;
1704         case B43_PHYTYPE_N:
1705                 if ((rev >= 11) && (rev <= 12))
1706                         filename = "n0initvals11";
1707                 else
1708                         goto err_no_initvals;
1709                 break;
1710         default:
1711                 goto err_no_initvals;
1712         }
1713         err = do_request_fw(dev, filename, &fw->initvals);
1714         if (err)
1715                 goto err_load;
1716
1717         /* Get bandswitch initvals */
1718         switch (dev->phy.type) {
1719         case B43_PHYTYPE_A:
1720                 if ((rev >= 5) && (rev <= 10)) {
1721                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
1722                                 filename = "a0g1bsinitvals5";
1723                         else
1724                                 filename = "a0g0bsinitvals5";
1725                 } else if (rev >= 11)
1726                         filename = NULL;
1727                 else
1728                         goto err_no_initvals;
1729                 break;
1730         case B43_PHYTYPE_G:
1731                 if ((rev >= 5) && (rev <= 10))
1732                         filename = "b0g0bsinitvals5";
1733                 else if (rev >= 11)
1734                         filename = NULL;
1735                 else
1736                         goto err_no_initvals;
1737                 break;
1738         case B43_PHYTYPE_N:
1739                 if ((rev >= 11) && (rev <= 12))
1740                         filename = "n0bsinitvals11";
1741                 else
1742                         goto err_no_initvals;
1743                 break;
1744         default:
1745                 goto err_no_initvals;
1746         }
1747         err = do_request_fw(dev, filename, &fw->initvals_band);
1748         if (err)
1749                 goto err_load;
1750
1751         return 0;
1752
1753 err_load:
1754         b43_print_fw_helptext(dev->wl, 1);
1755         goto error;
1756
1757 err_no_ucode:
1758         err = -ENODEV;
1759         b43err(dev->wl, "No microcode available for core rev %u\n", rev);
1760         goto error;
1761
1762 err_no_pcm:
1763         err = -ENODEV;
1764         b43err(dev->wl, "No PCM available for core rev %u\n", rev);
1765         goto error;
1766
1767 err_no_initvals:
1768         err = -ENODEV;
1769         b43err(dev->wl, "No Initial Values firmware file for PHY %u, "
1770                "core rev %u\n", dev->phy.type, rev);
1771         goto error;
1772
1773 error:
1774         b43_release_firmware(dev);
1775         return err;
1776 }
1777
1778 static int b43_upload_microcode(struct b43_wldev *dev)
1779 {
1780         const size_t hdr_len = sizeof(struct b43_fw_header);
1781         const __be32 *data;
1782         unsigned int i, len;
1783         u16 fwrev, fwpatch, fwdate, fwtime;
1784         u32 tmp, macctl;
1785         int err = 0;
1786
1787         /* Jump the microcode PSM to offset 0 */
1788         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1789         B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN);
1790         macctl |= B43_MACCTL_PSM_JMP0;
1791         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1792         /* Zero out all microcode PSM registers and shared memory. */
1793         for (i = 0; i < 64; i++)
1794                 b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0);
1795         for (i = 0; i < 4096; i += 2)
1796                 b43_shm_write16(dev, B43_SHM_SHARED, i, 0);
1797
1798         /* Upload Microcode. */
1799         data = (__be32 *) (dev->fw.ucode.data->data + hdr_len);
1800         len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32);
1801         b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000);
1802         for (i = 0; i < len; i++) {
1803                 b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
1804                 udelay(10);
1805         }
1806
1807         if (dev->fw.pcm.data) {
1808                 /* Upload PCM data. */
1809                 data = (__be32 *) (dev->fw.pcm.data->data + hdr_len);
1810                 len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32);
1811                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EA);
1812                 b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000);
1813                 /* No need for autoinc bit in SHM_HW */
1814                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EB);
1815                 for (i = 0; i < len; i++) {
1816                         b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
1817                         udelay(10);
1818                 }
1819         }
1820
1821         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL);
1822
1823         /* Start the microcode PSM */
1824         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1825         macctl &= ~B43_MACCTL_PSM_JMP0;
1826         macctl |= B43_MACCTL_PSM_RUN;
1827         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1828
1829         /* Wait for the microcode to load and respond */
1830         i = 0;
1831         while (1) {
1832                 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
1833                 if (tmp == B43_IRQ_MAC_SUSPENDED)
1834                         break;
1835                 i++;
1836                 if (i >= 20) {
1837                         b43err(dev->wl, "Microcode not responding\n");
1838                         b43_print_fw_helptext(dev->wl, 1);
1839                         err = -ENODEV;
1840                         goto error;
1841                 }
1842                 msleep_interruptible(50);
1843                 if (signal_pending(current)) {
1844                         err = -EINTR;
1845                         goto error;
1846                 }
1847         }
1848         b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);       /* dummy read */
1849
1850         /* Get and check the revisions. */
1851         fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV);
1852         fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH);
1853         fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE);
1854         fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME);
1855
1856         if (fwrev <= 0x128) {
1857                 b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from "
1858                        "binary drivers older than version 4.x is unsupported. "
1859                        "You must upgrade your firmware files.\n");
1860                 b43_print_fw_helptext(dev->wl, 1);
1861                 err = -EOPNOTSUPP;
1862                 goto error;
1863         }
1864         b43info(dev->wl, "Loading firmware version %u.%u "
1865                 "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
1866                 fwrev, fwpatch,
1867                 (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
1868                 (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
1869
1870         dev->fw.rev = fwrev;
1871         dev->fw.patch = fwpatch;
1872
1873         if (b43_is_old_txhdr_format(dev)) {
1874                 b43warn(dev->wl, "You are using an old firmware image. "
1875                         "Support for old firmware will be removed in July 2008.\n");
1876                 b43_print_fw_helptext(dev->wl, 0);
1877         }
1878
1879         return 0;
1880
1881 error:
1882         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1883         macctl &= ~B43_MACCTL_PSM_RUN;
1884         macctl |= B43_MACCTL_PSM_JMP0;
1885         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1886
1887         return err;
1888 }
1889
1890 static int b43_write_initvals(struct b43_wldev *dev,
1891                               const struct b43_iv *ivals,
1892                               size_t count,
1893                               size_t array_size)
1894 {
1895         const struct b43_iv *iv;
1896         u16 offset;
1897         size_t i;
1898         bool bit32;
1899
1900         BUILD_BUG_ON(sizeof(struct b43_iv) != 6);
1901         iv = ivals;
1902         for (i = 0; i < count; i++) {
1903                 if (array_size < sizeof(iv->offset_size))
1904                         goto err_format;
1905                 array_size -= sizeof(iv->offset_size);
1906                 offset = be16_to_cpu(iv->offset_size);
1907                 bit32 = !!(offset & B43_IV_32BIT);
1908                 offset &= B43_IV_OFFSET_MASK;
1909                 if (offset >= 0x1000)
1910                         goto err_format;
1911                 if (bit32) {
1912                         u32 value;
1913
1914                         if (array_size < sizeof(iv->data.d32))
1915                                 goto err_format;
1916                         array_size -= sizeof(iv->data.d32);
1917
1918                         value = be32_to_cpu(get_unaligned(&iv->data.d32));
1919                         b43_write32(dev, offset, value);
1920
1921                         iv = (const struct b43_iv *)((const uint8_t *)iv +
1922                                                         sizeof(__be16) +
1923                                                         sizeof(__be32));
1924                 } else {
1925                         u16 value;
1926
1927                         if (array_size < sizeof(iv->data.d16))
1928                                 goto err_format;
1929                         array_size -= sizeof(iv->data.d16);
1930
1931                         value = be16_to_cpu(iv->data.d16);
1932                         b43_write16(dev, offset, value);
1933
1934                         iv = (const struct b43_iv *)((const uint8_t *)iv +
1935                                                         sizeof(__be16) +
1936                                                         sizeof(__be16));
1937                 }
1938         }
1939         if (array_size)
1940                 goto err_format;
1941
1942         return 0;
1943
1944 err_format:
1945         b43err(dev->wl, "Initial Values Firmware file-format error.\n");
1946         b43_print_fw_helptext(dev->wl, 1);
1947
1948         return -EPROTO;
1949 }
1950
1951 static int b43_upload_initvals(struct b43_wldev *dev)
1952 {
1953         const size_t hdr_len = sizeof(struct b43_fw_header);
1954         const struct b43_fw_header *hdr;
1955         struct b43_firmware *fw = &dev->fw;
1956         const struct b43_iv *ivals;
1957         size_t count;
1958         int err;
1959
1960         hdr = (const struct b43_fw_header *)(fw->initvals.data->data);
1961         ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len);
1962         count = be32_to_cpu(hdr->size);
1963         err = b43_write_initvals(dev, ivals, count,
1964                                  fw->initvals.data->size - hdr_len);
1965         if (err)
1966                 goto out;
1967         if (fw->initvals_band.data) {
1968                 hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
1969                 ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
1970                 count = be32_to_cpu(hdr->size);
1971                 err = b43_write_initvals(dev, ivals, count,
1972                                          fw->initvals_band.data->size - hdr_len);
1973                 if (err)
1974                         goto out;
1975         }
1976 out:
1977
1978         return err;
1979 }
1980
1981 /* Initialize the GPIOs
1982  * http://bcm-specs.sipsolutions.net/GPIO
1983  */
1984 static int b43_gpio_init(struct b43_wldev *dev)
1985 {
1986         struct ssb_bus *bus = dev->dev->bus;
1987         struct ssb_device *gpiodev, *pcidev = NULL;
1988         u32 mask, set;
1989
1990         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
1991                     & ~B43_MACCTL_GPOUTSMSK);
1992
1993         b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK)
1994                     | 0x000F);
1995
1996         mask = 0x0000001F;
1997         set = 0x0000000F;
1998         if (dev->dev->bus->chip_id == 0x4301) {
1999                 mask |= 0x0060;
2000                 set |= 0x0060;
2001         }
2002         if (0 /* FIXME: conditional unknown */ ) {
2003                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2004                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2005                             | 0x0100);
2006                 mask |= 0x0180;
2007                 set |= 0x0180;
2008         }
2009         if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
2010                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2011                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2012                             | 0x0200);
2013                 mask |= 0x0200;
2014                 set |= 0x0200;
2015         }
2016         if (dev->dev->id.revision >= 2)
2017                 mask |= 0x0010; /* FIXME: This is redundant. */
2018
2019 #ifdef CONFIG_SSB_DRIVER_PCICORE
2020         pcidev = bus->pcicore.dev;
2021 #endif
2022         gpiodev = bus->chipco.dev ? : pcidev;
2023         if (!gpiodev)
2024                 return 0;
2025         ssb_write32(gpiodev, B43_GPIO_CONTROL,
2026                     (ssb_read32(gpiodev, B43_GPIO_CONTROL)
2027                      & mask) | set);
2028
2029         return 0;
2030 }
2031
2032 /* Turn off all GPIO stuff. Call this on module unload, for example. */
2033 static void b43_gpio_cleanup(struct b43_wldev *dev)
2034 {
2035         struct ssb_bus *bus = dev->dev->bus;
2036         struct ssb_device *gpiodev, *pcidev = NULL;
2037
2038 #ifdef CONFIG_SSB_DRIVER_PCICORE
2039         pcidev = bus->pcicore.dev;
2040 #endif
2041         gpiodev = bus->chipco.dev ? : pcidev;
2042         if (!gpiodev)
2043                 return;
2044         ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
2045 }
2046
2047 /* http://bcm-specs.sipsolutions.net/EnableMac */
2048 void b43_mac_enable(struct b43_wldev *dev)
2049 {
2050         dev->mac_suspended--;
2051         B43_WARN_ON(dev->mac_suspended < 0);
2052         if (dev->mac_suspended == 0) {
2053                 b43_write32(dev, B43_MMIO_MACCTL,
2054                             b43_read32(dev, B43_MMIO_MACCTL)
2055                             | B43_MACCTL_ENABLED);
2056                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON,
2057                             B43_IRQ_MAC_SUSPENDED);
2058                 /* Commit writes */
2059                 b43_read32(dev, B43_MMIO_MACCTL);
2060                 b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2061                 b43_power_saving_ctl_bits(dev, 0);
2062
2063                 /* Re-enable IRQs. */
2064                 spin_lock_irq(&dev->wl->irq_lock);
2065                 b43_interrupt_enable(dev, dev->irq_savedstate);
2066                 spin_unlock_irq(&dev->wl->irq_lock);
2067         }
2068 }
2069
2070 /* http://bcm-specs.sipsolutions.net/SuspendMAC */
2071 void b43_mac_suspend(struct b43_wldev *dev)
2072 {
2073         int i;
2074         u32 tmp;
2075
2076         might_sleep();
2077         B43_WARN_ON(dev->mac_suspended < 0);
2078
2079         if (dev->mac_suspended == 0) {
2080                 /* Mask IRQs before suspending MAC. Otherwise
2081                  * the MAC stays busy and won't suspend. */
2082                 spin_lock_irq(&dev->wl->irq_lock);
2083                 tmp = b43_interrupt_disable(dev, B43_IRQ_ALL);
2084                 spin_unlock_irq(&dev->wl->irq_lock);
2085                 b43_synchronize_irq(dev);
2086                 dev->irq_savedstate = tmp;
2087
2088                 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
2089                 b43_write32(dev, B43_MMIO_MACCTL,
2090                             b43_read32(dev, B43_MMIO_MACCTL)
2091                             & ~B43_MACCTL_ENABLED);
2092                 /* force pci to flush the write */
2093                 b43_read32(dev, B43_MMIO_MACCTL);
2094                 for (i = 40; i; i--) {
2095                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2096                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2097                                 goto out;
2098                         msleep(1);
2099                 }
2100                 b43err(dev->wl, "MAC suspend failed\n");
2101         }
2102 out:
2103         dev->mac_suspended++;
2104 }
2105
2106 static void b43_adjust_opmode(struct b43_wldev *dev)
2107 {
2108         struct b43_wl *wl = dev->wl;
2109         u32 ctl;
2110         u16 cfp_pretbtt;
2111
2112         ctl = b43_read32(dev, B43_MMIO_MACCTL);
2113         /* Reset status to STA infrastructure mode. */
2114         ctl &= ~B43_MACCTL_AP;
2115         ctl &= ~B43_MACCTL_KEEP_CTL;
2116         ctl &= ~B43_MACCTL_KEEP_BADPLCP;
2117         ctl &= ~B43_MACCTL_KEEP_BAD;
2118         ctl &= ~B43_MACCTL_PROMISC;
2119         ctl &= ~B43_MACCTL_BEACPROMISC;
2120         ctl |= B43_MACCTL_INFRA;
2121
2122         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
2123                 ctl |= B43_MACCTL_AP;
2124         else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
2125                 ctl &= ~B43_MACCTL_INFRA;
2126
2127         if (wl->filter_flags & FIF_CONTROL)
2128                 ctl |= B43_MACCTL_KEEP_CTL;
2129         if (wl->filter_flags & FIF_FCSFAIL)
2130                 ctl |= B43_MACCTL_KEEP_BAD;
2131         if (wl->filter_flags & FIF_PLCPFAIL)
2132                 ctl |= B43_MACCTL_KEEP_BADPLCP;
2133         if (wl->filter_flags & FIF_PROMISC_IN_BSS)
2134                 ctl |= B43_MACCTL_PROMISC;
2135         if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
2136                 ctl |= B43_MACCTL_BEACPROMISC;
2137
2138         /* Workaround: On old hardware the HW-MAC-address-filter
2139          * doesn't work properly, so always run promisc in filter
2140          * it in software. */
2141         if (dev->dev->id.revision <= 4)
2142                 ctl |= B43_MACCTL_PROMISC;
2143
2144         b43_write32(dev, B43_MMIO_MACCTL, ctl);
2145
2146         cfp_pretbtt = 2;
2147         if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
2148                 if (dev->dev->bus->chip_id == 0x4306 &&
2149                     dev->dev->bus->chip_rev == 3)
2150                         cfp_pretbtt = 100;
2151                 else
2152                         cfp_pretbtt = 50;
2153         }
2154         b43_write16(dev, 0x612, cfp_pretbtt);
2155 }
2156
2157 static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
2158 {
2159         u16 offset;
2160
2161         if (is_ofdm) {
2162                 offset = 0x480;
2163                 offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
2164         } else {
2165                 offset = 0x4C0;
2166                 offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
2167         }
2168         b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20,
2169                         b43_shm_read16(dev, B43_SHM_SHARED, offset));
2170 }
2171
2172 static void b43_rate_memory_init(struct b43_wldev *dev)
2173 {
2174         switch (dev->phy.type) {
2175         case B43_PHYTYPE_A:
2176         case B43_PHYTYPE_G:
2177         case B43_PHYTYPE_N:
2178                 b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
2179                 b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
2180                 b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);
2181                 b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1);
2182                 b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1);
2183                 b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1);
2184                 b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1);
2185                 if (dev->phy.type == B43_PHYTYPE_A)
2186                         break;
2187                 /* fallthrough */
2188         case B43_PHYTYPE_B:
2189                 b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0);
2190                 b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0);
2191                 b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0);
2192                 b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0);
2193                 break;
2194         default:
2195                 B43_WARN_ON(1);
2196         }
2197 }
2198
2199 /* Set the TX-Antenna for management frames sent by firmware. */
2200 static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
2201 {
2202         u16 ant = 0;
2203         u16 tmp;
2204
2205         switch (antenna) {
2206         case B43_ANTENNA0:
2207                 ant |= B43_TXH_PHY_ANT0;
2208                 break;
2209         case B43_ANTENNA1:
2210                 ant |= B43_TXH_PHY_ANT1;
2211                 break;
2212         case B43_ANTENNA2:
2213                 ant |= B43_TXH_PHY_ANT2;
2214                 break;
2215         case B43_ANTENNA3:
2216                 ant |= B43_TXH_PHY_ANT3;
2217                 break;
2218         case B43_ANTENNA_AUTO:
2219                 ant |= B43_TXH_PHY_ANT01AUTO;
2220                 break;
2221         default:
2222                 B43_WARN_ON(1);
2223         }
2224
2225         /* FIXME We also need to set the other flags of the PHY control field somewhere. */
2226
2227         /* For Beacons */
2228         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
2229         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2230         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, tmp);
2231         /* For ACK/CTS */
2232         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL);
2233         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2234         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp);
2235         /* For Probe Resposes */
2236         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL);
2237         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2238         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
2239 }
2240
2241 /* This is the opposite of b43_chip_init() */
2242 static void b43_chip_exit(struct b43_wldev *dev)
2243 {
2244         b43_radio_turn_off(dev, 1);
2245         b43_gpio_cleanup(dev);
2246         /* firmware is released later */
2247 }
2248
2249 /* Initialize the chip
2250  * http://bcm-specs.sipsolutions.net/ChipInit
2251  */
2252 static int b43_chip_init(struct b43_wldev *dev)
2253 {
2254         struct b43_phy *phy = &dev->phy;
2255         int err, tmp;
2256         u32 value32, macctl;
2257         u16 value16;
2258
2259         /* Initialize the MAC control */
2260         macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED;
2261         if (dev->phy.gmode)
2262                 macctl |= B43_MACCTL_GMODE;
2263         macctl |= B43_MACCTL_INFRA;
2264         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2265
2266         err = b43_request_firmware(dev);
2267         if (err)
2268                 goto out;
2269         err = b43_upload_microcode(dev);
2270         if (err)
2271                 goto out;       /* firmware is released later */
2272
2273         err = b43_gpio_init(dev);
2274         if (err)
2275                 goto out;       /* firmware is released later */
2276
2277         err = b43_upload_initvals(dev);
2278         if (err)
2279                 goto err_gpio_clean;
2280         b43_radio_turn_on(dev);
2281
2282         b43_write16(dev, 0x03E6, 0x0000);
2283         err = b43_phy_init(dev);
2284         if (err)
2285                 goto err_radio_off;
2286
2287         /* Select initial Interference Mitigation. */
2288         tmp = phy->interfmode;
2289         phy->interfmode = B43_INTERFMODE_NONE;
2290         b43_radio_set_interference_mitigation(dev, tmp);
2291
2292         b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
2293         b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
2294
2295         if (phy->type == B43_PHYTYPE_B) {
2296                 value16 = b43_read16(dev, 0x005E);
2297                 value16 |= 0x0004;
2298                 b43_write16(dev, 0x005E, value16);
2299         }
2300         b43_write32(dev, 0x0100, 0x01000000);
2301         if (dev->dev->id.revision < 5)
2302                 b43_write32(dev, 0x010C, 0x01000000);
2303
2304         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2305                     & ~B43_MACCTL_INFRA);
2306         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2307                     | B43_MACCTL_INFRA);
2308
2309         /* Probe Response Timeout value */
2310         /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
2311         b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000);
2312
2313         /* Initially set the wireless operation mode. */
2314         b43_adjust_opmode(dev);
2315
2316         if (dev->dev->id.revision < 3) {
2317                 b43_write16(dev, 0x060E, 0x0000);
2318                 b43_write16(dev, 0x0610, 0x8000);
2319                 b43_write16(dev, 0x0604, 0x0000);
2320                 b43_write16(dev, 0x0606, 0x0200);
2321         } else {
2322                 b43_write32(dev, 0x0188, 0x80000000);
2323                 b43_write32(dev, 0x018C, 0x02000000);
2324         }
2325         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
2326         b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
2327         b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
2328         b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
2329         b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
2330         b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
2331         b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
2332
2333         value32 = ssb_read32(dev->dev, SSB_TMSLOW);
2334         value32 |= 0x00100000;
2335         ssb_write32(dev->dev, SSB_TMSLOW, value32);
2336
2337         b43_write16(dev, B43_MMIO_POWERUP_DELAY,
2338                     dev->dev->bus->chipco.fast_pwrup_delay);
2339
2340         err = 0;
2341         b43dbg(dev->wl, "Chip initialized\n");
2342 out:
2343         return err;
2344
2345 err_radio_off:
2346         b43_radio_turn_off(dev, 1);
2347 err_gpio_clean:
2348         b43_gpio_cleanup(dev);
2349         return err;
2350 }
2351
2352 static void b43_periodic_every120sec(struct b43_wldev *dev)
2353 {
2354         struct b43_phy *phy = &dev->phy;
2355
2356         if (phy->type != B43_PHYTYPE_G || phy->rev < 2)
2357                 return;
2358
2359         b43_mac_suspend(dev);
2360         b43_lo_g_measure(dev);
2361         b43_mac_enable(dev);
2362         if (b43_has_hardware_pctl(phy))
2363                 b43_lo_g_ctl_mark_all_unused(dev);
2364 }
2365
2366 static void b43_periodic_every60sec(struct b43_wldev *dev)
2367 {
2368         struct b43_phy *phy = &dev->phy;
2369
2370         if (phy->type != B43_PHYTYPE_G)
2371                 return;
2372         if (!b43_has_hardware_pctl(phy))
2373                 b43_lo_g_ctl_mark_all_unused(dev);
2374         if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
2375                 b43_mac_suspend(dev);
2376                 b43_calc_nrssi_slope(dev);
2377                 if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
2378                         u8 old_chan = phy->channel;
2379
2380                         /* VCO Calibration */
2381                         if (old_chan >= 8)
2382                                 b43_radio_selectchannel(dev, 1, 0);
2383                         else
2384                                 b43_radio_selectchannel(dev, 13, 0);
2385                         b43_radio_selectchannel(dev, old_chan, 0);
2386                 }
2387                 b43_mac_enable(dev);
2388         }
2389 }
2390
2391 static void b43_periodic_every30sec(struct b43_wldev *dev)
2392 {
2393         /* Update device statistics. */
2394         b43_calculate_link_quality(dev);
2395 }
2396
2397 static void b43_periodic_every15sec(struct b43_wldev *dev)
2398 {
2399         struct b43_phy *phy = &dev->phy;
2400
2401         if (phy->type == B43_PHYTYPE_G) {
2402                 //TODO: update_aci_moving_average
2403                 if (phy->aci_enable && phy->aci_wlan_automatic) {
2404                         b43_mac_suspend(dev);
2405                         if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) {
2406                                 if (0 /*TODO: bunch of conditions */ ) {
2407                                         b43_radio_set_interference_mitigation
2408                                             (dev, B43_INTERFMODE_MANUALWLAN);
2409                                 }
2410                         } else if (1 /*TODO*/) {
2411                                 /*
2412                                    if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) {
2413                                    b43_radio_set_interference_mitigation(dev,
2414                                    B43_INTERFMODE_NONE);
2415                                    }
2416                                  */
2417                         }
2418                         b43_mac_enable(dev);
2419                 } else if (phy->interfmode == B43_INTERFMODE_NONWLAN &&
2420                            phy->rev == 1) {
2421                         //TODO: implement rev1 workaround
2422                 }
2423         }
2424         b43_phy_xmitpower(dev); //FIXME: unless scanning?
2425         //TODO for APHY (temperature?)
2426
2427         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
2428         wmb();
2429 }
2430
2431 static void do_periodic_work(struct b43_wldev *dev)
2432 {
2433         unsigned int state;
2434
2435         state = dev->periodic_state;
2436         if (state % 8 == 0)
2437                 b43_periodic_every120sec(dev);
2438         if (state % 4 == 0)
2439                 b43_periodic_every60sec(dev);
2440         if (state % 2 == 0)
2441                 b43_periodic_every30sec(dev);
2442         b43_periodic_every15sec(dev);
2443 }
2444
2445 /* Periodic work locking policy:
2446  *      The whole periodic work handler is protected by
2447  *      wl->mutex. If another lock is needed somewhere in the
2448  *      pwork callchain, it's aquired in-place, where it's needed.
2449  */
2450 static void b43_periodic_work_handler(struct work_struct *work)
2451 {
2452         struct b43_wldev *dev = container_of(work, struct b43_wldev,
2453                                              periodic_work.work);
2454         struct b43_wl *wl = dev->wl;
2455         unsigned long delay;
2456
2457         mutex_lock(&wl->mutex);
2458
2459         if (unlikely(b43_status(dev) != B43_STAT_STARTED))
2460                 goto out;
2461         if (b43_debug(dev, B43_DBG_PWORK_STOP))
2462                 goto out_requeue;
2463
2464         do_periodic_work(dev);
2465
2466         dev->periodic_state++;
2467 out_requeue:
2468         if (b43_debug(dev, B43_DBG_PWORK_FAST))
2469                 delay = msecs_to_jiffies(50);
2470         else
2471                 delay = round_jiffies_relative(HZ * 15);
2472         queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay);
2473 out:
2474         mutex_unlock(&wl->mutex);
2475 }
2476
2477 static void b43_periodic_tasks_setup(struct b43_wldev *dev)
2478 {
2479         struct delayed_work *work = &dev->periodic_work;
2480
2481         dev->periodic_state = 0;
2482         INIT_DELAYED_WORK(work, b43_periodic_work_handler);
2483         queue_delayed_work(dev->wl->hw->workqueue, work, 0);
2484 }
2485
2486 /* Check if communication with the device works correctly. */
2487 static int b43_validate_chipaccess(struct b43_wldev *dev)
2488 {
2489         u32 v, backup;
2490
2491         backup = b43_shm_read32(dev, B43_SHM_SHARED, 0);
2492
2493         /* Check for read/write and endianness problems. */
2494         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55);
2495         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55)
2496                 goto error;
2497         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA);
2498         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA)
2499                 goto error;
2500
2501         b43_shm_write32(dev, B43_SHM_SHARED, 0, backup);
2502
2503         if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) {
2504                 /* The 32bit register shadows the two 16bit registers
2505                  * with update sideeffects. Validate this. */
2506                 b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
2507                 b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB);
2508                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB)
2509                         goto error;
2510                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC)
2511                         goto error;
2512         }
2513         b43_write32(dev, B43_MMIO_TSF_CFP_START, 0);
2514
2515         v = b43_read32(dev, B43_MMIO_MACCTL);
2516         v |= B43_MACCTL_GMODE;
2517         if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED))
2518                 goto error;
2519
2520         return 0;
2521 error:
2522         b43err(dev->wl, "Failed to validate the chipaccess\n");
2523         return -ENODEV;
2524 }
2525
2526 static void b43_security_init(struct b43_wldev *dev)
2527 {
2528         dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20;
2529         B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key));
2530         dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP);
2531         /* KTP is a word address, but we address SHM bytewise.
2532          * So multiply by two.
2533          */
2534         dev->ktp *= 2;
2535         if (dev->dev->id.revision >= 5) {
2536                 /* Number of RCMTA address slots */
2537                 b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8);
2538         }
2539         b43_clear_keys(dev);
2540 }
2541
2542 static int b43_rng_read(struct hwrng *rng, u32 * data)
2543 {
2544         struct b43_wl *wl = (struct b43_wl *)rng->priv;
2545         unsigned long flags;
2546
2547         /* Don't take wl->mutex here, as it could deadlock with
2548          * hwrng internal locking. It's not needed to take
2549          * wl->mutex here, anyway. */
2550
2551         spin_lock_irqsave(&wl->irq_lock, flags);
2552         *data = b43_read16(wl->current_dev, B43_MMIO_RNG);
2553         spin_unlock_irqrestore(&wl->irq_lock, flags);
2554
2555         return (sizeof(u16));
2556 }
2557
2558 static void b43_rng_exit(struct b43_wl *wl, bool suspended)
2559 {
2560         if (wl->rng_initialized)
2561                 __hwrng_unregister(&wl->rng, suspended);
2562 }
2563
2564 static int b43_rng_init(struct b43_wl *wl)
2565 {
2566         int err;
2567
2568         snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
2569                  "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
2570         wl->rng.name = wl->rng_name;
2571         wl->rng.data_read = b43_rng_read;
2572         wl->rng.priv = (unsigned long)wl;
2573         wl->rng_initialized = 1;
2574         err = hwrng_register(&wl->rng);
2575         if (err) {
2576                 wl->rng_initialized = 0;
2577                 b43err(wl, "Failed to register the random "
2578                        "number generator (%d)\n", err);
2579         }
2580
2581         return err;
2582 }
2583
2584 static int b43_op_tx(struct ieee80211_hw *hw,
2585                      struct sk_buff *skb,
2586                      struct ieee80211_tx_control *ctl)
2587 {
2588         struct b43_wl *wl = hw_to_b43_wl(hw);
2589         struct b43_wldev *dev = wl->current_dev;
2590         int err = -ENODEV;
2591
2592         if (unlikely(!dev))
2593                 goto out;
2594         if (unlikely(b43_status(dev) < B43_STAT_STARTED))
2595                 goto out;
2596         /* DMA-TX is done without a global lock. */
2597         err = b43_dma_tx(dev, skb, ctl);
2598 out:
2599         if (unlikely(err))
2600                 return NETDEV_TX_BUSY;
2601         return NETDEV_TX_OK;
2602 }
2603
2604 static int b43_op_conf_tx(struct ieee80211_hw *hw,
2605                           int queue,
2606                           const struct ieee80211_tx_queue_params *params)
2607 {
2608         return 0;
2609 }
2610
2611 static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
2612                                struct ieee80211_tx_queue_stats *stats)
2613 {
2614         struct b43_wl *wl = hw_to_b43_wl(hw);
2615         struct b43_wldev *dev = wl->current_dev;
2616         unsigned long flags;
2617         int err = -ENODEV;
2618
2619         if (!dev)
2620                 goto out;
2621         spin_lock_irqsave(&wl->irq_lock, flags);
2622         if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
2623                 b43_dma_get_tx_stats(dev, stats);
2624                 err = 0;
2625         }
2626         spin_unlock_irqrestore(&wl->irq_lock, flags);
2627 out:
2628         return err;
2629 }
2630
2631 static int b43_op_get_stats(struct ieee80211_hw *hw,
2632                             struct ieee80211_low_level_stats *stats)
2633 {
2634         struct b43_wl *wl = hw_to_b43_wl(hw);
2635         unsigned long flags;
2636
2637         spin_lock_irqsave(&wl->irq_lock, flags);
2638         memcpy(stats, &wl->ieee_stats, sizeof(*stats));
2639         spin_unlock_irqrestore(&wl->irq_lock, flags);
2640
2641         return 0;
2642 }
2643
2644 static const char *phymode_to_string(unsigned int phymode)
2645 {
2646         switch (phymode) {
2647         case B43_PHYMODE_A:
2648                 return "A";
2649         case B43_PHYMODE_B:
2650                 return "B";
2651         case B43_PHYMODE_G:
2652                 return "G";
2653         default:
2654                 B43_WARN_ON(1);
2655         }
2656         return "";
2657 }
2658
2659 static int find_wldev_for_phymode(struct b43_wl *wl,
2660                                   unsigned int phymode,
2661                                   struct b43_wldev **dev, bool * gmode)
2662 {
2663         struct b43_wldev *d;
2664
2665         list_for_each_entry(d, &wl->devlist, list) {
2666                 if (d->phy.possible_phymodes & phymode) {
2667                         /* Ok, this device supports the PHY-mode.
2668                          * Now figure out how the gmode bit has to be
2669                          * set to support it. */
2670                         if (phymode == B43_PHYMODE_A)
2671                                 *gmode = 0;
2672                         else
2673                                 *gmode = 1;
2674                         *dev = d;
2675
2676                         return 0;
2677                 }
2678         }
2679
2680         return -ESRCH;
2681 }
2682
2683 static void b43_put_phy_into_reset(struct b43_wldev *dev)
2684 {
2685         struct ssb_device *sdev = dev->dev;
2686         u32 tmslow;
2687
2688         tmslow = ssb_read32(sdev, SSB_TMSLOW);
2689         tmslow &= ~B43_TMSLOW_GMODE;
2690         tmslow |= B43_TMSLOW_PHYRESET;
2691         tmslow |= SSB_TMSLOW_FGC;
2692         ssb_write32(sdev, SSB_TMSLOW, tmslow);
2693         msleep(1);
2694
2695         tmslow = ssb_read32(sdev, SSB_TMSLOW);
2696         tmslow &= ~SSB_TMSLOW_FGC;
2697         tmslow |= B43_TMSLOW_PHYRESET;
2698         ssb_write32(sdev, SSB_TMSLOW, tmslow);
2699         msleep(1);
2700 }
2701
2702 /* Expects wl->mutex locked */
2703 static int b43_switch_phymode(struct b43_wl *wl, unsigned int new_mode)
2704 {
2705         struct b43_wldev *up_dev;
2706         struct b43_wldev *down_dev;
2707         int err;
2708         bool gmode = 0;
2709         int prev_status;
2710
2711         err = find_wldev_for_phymode(wl, new_mode, &up_dev, &gmode);
2712         if (err) {
2713                 b43err(wl, "Could not find a device for %s-PHY mode\n",
2714                        phymode_to_string(new_mode));
2715                 return err;
2716         }
2717         if ((up_dev == wl->current_dev) &&
2718             (!!wl->current_dev->phy.gmode == !!gmode)) {
2719                 /* This device is already running. */
2720                 return 0;
2721         }
2722         b43dbg(wl, "Reconfiguring PHYmode to %s-PHY\n",
2723                phymode_to_string(new_mode));
2724         down_dev = wl->current_dev;
2725
2726         prev_status = b43_status(down_dev);
2727         /* Shutdown the currently running core. */
2728         if (prev_status >= B43_STAT_STARTED)
2729                 b43_wireless_core_stop(down_dev);
2730         if (prev_status >= B43_STAT_INITIALIZED)
2731                 b43_wireless_core_exit(down_dev);
2732
2733         if (down_dev != up_dev) {
2734                 /* We switch to a different core, so we put PHY into
2735                  * RESET on the old core. */
2736                 b43_put_phy_into_reset(down_dev);
2737         }
2738
2739         /* Now start the new core. */
2740         up_dev->phy.gmode = gmode;
2741         if (prev_status >= B43_STAT_INITIALIZED) {
2742                 err = b43_wireless_core_init(up_dev);
2743                 if (err) {
2744                         b43err(wl, "Fatal: Could not initialize device for "
2745                                "newly selected %s-PHY mode\n",
2746                                phymode_to_string(new_mode));
2747                         goto init_failure;
2748                 }
2749         }
2750         if (prev_status >= B43_STAT_STARTED) {
2751                 err = b43_wireless_core_start(up_dev);
2752                 if (err) {
2753                         b43err(wl, "Fatal: Coult not start device for "
2754                                "newly selected %s-PHY mode\n",
2755                                phymode_to_string(new_mode));
2756                         b43_wireless_core_exit(up_dev);
2757                         goto init_failure;
2758                 }
2759         }
2760         B43_WARN_ON(b43_status(up_dev) != prev_status);
2761
2762         wl->current_dev = up_dev;
2763
2764         return 0;
2765       init_failure:
2766         /* Whoops, failed to init the new core. No core is operating now. */
2767         wl->current_dev = NULL;
2768         return err;
2769 }
2770
2771 /* Check if the use of the antenna that ieee80211 told us to
2772  * use is possible. This will fall back to DEFAULT.
2773  * "antenna_nr" is the antenna identifier we got from ieee80211. */
2774 u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
2775                                   u8 antenna_nr)
2776 {
2777         u8 antenna_mask;
2778
2779         if (antenna_nr == 0) {
2780                 /* Zero means "use default antenna". That's always OK. */
2781                 return 0;
2782         }
2783
2784         /* Get the mask of available antennas. */
2785         if (dev->phy.gmode)
2786                 antenna_mask = dev->dev->bus->sprom.ant_available_bg;
2787         else
2788                 antenna_mask = dev->dev->bus->sprom.ant_available_a;
2789
2790         if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
2791                 /* This antenna is not available. Fall back to default. */
2792                 return 0;
2793         }
2794
2795         return antenna_nr;
2796 }
2797
2798 static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna)
2799 {
2800         antenna = b43_ieee80211_antenna_sanitize(dev, antenna);
2801         switch (antenna) {
2802         case 0:         /* default/diversity */
2803                 return B43_ANTENNA_DEFAULT;
2804         case 1:         /* Antenna 0 */
2805                 return B43_ANTENNA0;
2806         case 2:         /* Antenna 1 */
2807                 return B43_ANTENNA1;
2808         case 3:         /* Antenna 2 */
2809                 return B43_ANTENNA2;
2810         case 4:         /* Antenna 3 */
2811                 return B43_ANTENNA3;
2812         default:
2813                 return B43_ANTENNA_DEFAULT;
2814         }
2815 }
2816
2817 static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
2818 {
2819         struct b43_wl *wl = hw_to_b43_wl(hw);
2820         struct b43_wldev *dev;
2821         struct b43_phy *phy;
2822         unsigned long flags;
2823         unsigned int new_phymode = 0xFFFF;
2824         int antenna;
2825         int err = 0;
2826         u32 savedirqs;
2827
2828         mutex_lock(&wl->mutex);
2829
2830         /* Switch the PHY mode (if necessary). */
2831         switch (conf->phymode) {
2832         case MODE_IEEE80211A:
2833                 new_phymode = B43_PHYMODE_A;
2834                 break;
2835         case MODE_IEEE80211B:
2836                 new_phymode = B43_PHYMODE_B;
2837                 break;
2838         case MODE_IEEE80211G:
2839                 new_phymode = B43_PHYMODE_G;
2840                 break;
2841         default:
2842                 B43_WARN_ON(1);
2843         }
2844         err = b43_switch_phymode(wl, new_phymode);
2845         if (err)
2846                 goto out_unlock_mutex;
2847         dev = wl->current_dev;
2848         phy = &dev->phy;
2849
2850         /* Disable IRQs while reconfiguring the device.
2851          * This makes it possible to drop the spinlock throughout
2852          * the reconfiguration process. */
2853         spin_lock_irqsave(&wl->irq_lock, flags);
2854         if (b43_status(dev) < B43_STAT_STARTED) {
2855                 spin_unlock_irqrestore(&wl->irq_lock, flags);
2856                 goto out_unlock_mutex;
2857         }
2858         savedirqs = b43_interrupt_disable(dev, B43_IRQ_ALL);
2859         spin_unlock_irqrestore(&wl->irq_lock, flags);
2860         b43_synchronize_irq(dev);
2861
2862         /* Switch to the requested channel.
2863          * The firmware takes care of races with the TX handler. */
2864         if (conf->channel_val != phy->channel)
2865                 b43_radio_selectchannel(dev, conf->channel_val, 0);
2866
2867         /* Enable/Disable ShortSlot timing. */
2868         if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) !=
2869             dev->short_slot) {
2870                 B43_WARN_ON(phy->type != B43_PHYTYPE_G);
2871                 if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)
2872                         b43_short_slot_timing_enable(dev);
2873                 else
2874                         b43_short_slot_timing_disable(dev);
2875         }
2876
2877         dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
2878
2879         /* Adjust the desired TX power level. */
2880         if (conf->power_level != 0) {
2881                 if (conf->power_level != phy->power_level) {
2882                         phy->power_level = conf->power_level;
2883                         b43_phy_xmitpower(dev);
2884                 }
2885         }
2886
2887         /* Antennas for RX and management frame TX. */
2888         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
2889         b43_mgmtframe_txantenna(dev, antenna);
2890         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
2891         b43_set_rx_antenna(dev, antenna);
2892
2893         /* Update templates for AP mode. */
2894         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
2895                 b43_set_beacon_int(dev, conf->beacon_int);
2896
2897         if (!!conf->radio_enabled != phy->radio_on) {
2898                 if (conf->radio_enabled) {
2899                         b43_radio_turn_on(dev);
2900                         b43info(dev->wl, "Radio turned on by software\n");
2901                         if (!dev->radio_hw_enable) {
2902                                 b43info(dev->wl, "The hardware RF-kill button "
2903                                         "still turns the radio physically off. "
2904                                         "Press the button to turn it on.\n");
2905                         }
2906                 } else {
2907                         b43_radio_turn_off(dev, 0);
2908                         b43info(dev->wl, "Radio turned off by software\n");
2909                 }
2910         }
2911
2912         spin_lock_irqsave(&wl->irq_lock, flags);
2913         b43_interrupt_enable(dev, savedirqs);
2914         mmiowb();
2915         spin_unlock_irqrestore(&wl->irq_lock, flags);
2916       out_unlock_mutex:
2917         mutex_unlock(&wl->mutex);
2918
2919         return err;
2920 }
2921
2922 static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2923                            const u8 *local_addr, const u8 *addr,
2924                            struct ieee80211_key_conf *key)
2925 {
2926         struct b43_wl *wl = hw_to_b43_wl(hw);
2927         struct b43_wldev *dev;
2928         unsigned long flags;
2929         u8 algorithm;
2930         u8 index;
2931         int err;
2932         DECLARE_MAC_BUF(mac);
2933
2934         if (modparam_nohwcrypt)
2935                 return -ENOSPC; /* User disabled HW-crypto */
2936
2937         mutex_lock(&wl->mutex);
2938         spin_lock_irqsave(&wl->irq_lock, flags);
2939
2940         dev = wl->current_dev;
2941         err = -ENODEV;
2942         if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
2943                 goto out_unlock;
2944
2945         err = -EINVAL;
2946         switch (key->alg) {
2947         case ALG_WEP:
2948                 if (key->keylen == 5)
2949                         algorithm = B43_SEC_ALGO_WEP40;
2950                 else
2951                         algorithm = B43_SEC_ALGO_WEP104;
2952                 break;
2953         case ALG_TKIP:
2954                 algorithm = B43_SEC_ALGO_TKIP;
2955                 break;
2956         case ALG_CCMP:
2957                 algorithm = B43_SEC_ALGO_AES;
2958                 break;
2959         default:
2960                 B43_WARN_ON(1);
2961                 goto out_unlock;
2962         }
2963         index = (u8) (key->keyidx);
2964         if (index > 3)
2965                 goto out_unlock;
2966
2967         switch (cmd) {
2968         case SET_KEY:
2969                 if (algorithm == B43_SEC_ALGO_TKIP) {
2970                         /* FIXME: No TKIP hardware encryption for now. */
2971                         err = -EOPNOTSUPP;
2972                         goto out_unlock;
2973                 }
2974
2975                 if (is_broadcast_ether_addr(addr)) {
2976                         /* addr is FF:FF:FF:FF:FF:FF for default keys */
2977                         err = b43_key_write(dev, index, algorithm,
2978                                             key->key, key->keylen, NULL, key);
2979                 } else {
2980                         /*
2981                          * either pairwise key or address is 00:00:00:00:00:00
2982                          * for transmit-only keys
2983                          */
2984                         err = b43_key_write(dev, -1, algorithm,
2985                                             key->key, key->keylen, addr, key);
2986                 }
2987                 if (err)
2988                         goto out_unlock;
2989
2990                 if (algorithm == B43_SEC_ALGO_WEP40 ||
2991                     algorithm == B43_SEC_ALGO_WEP104) {
2992                         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS);
2993                 } else {
2994                         b43_hf_write(dev,
2995                                      b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
2996                 }
2997                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
2998                 break;
2999         case DISABLE_KEY: {
3000                 err = b43_key_clear(dev, key->hw_key_idx);
3001                 if (err)
3002                         goto out_unlock;
3003                 break;
3004         }
3005         default:
3006                 B43_WARN_ON(1);
3007         }
3008 out_unlock:
3009         spin_unlock_irqrestore(&wl->irq_lock, flags);
3010         mutex_unlock(&wl->mutex);
3011         if (!err) {
3012                 b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
3013                        "mac: %s\n",
3014                        cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
3015                        print_mac(mac, addr));
3016         }
3017         return err;
3018 }
3019
3020 static void b43_op_configure_filter(struct ieee80211_hw *hw,
3021                                     unsigned int changed, unsigned int *fflags,
3022                                     int mc_count, struct dev_addr_list *mc_list)
3023 {
3024         struct b43_wl *wl = hw_to_b43_wl(hw);
3025         struct b43_wldev *dev = wl->current_dev;
3026         unsigned long flags;
3027
3028         if (!dev) {
3029                 *fflags = 0;
3030                 return;
3031         }
3032
3033         spin_lock_irqsave(&wl->irq_lock, flags);
3034         *fflags &= FIF_PROMISC_IN_BSS |
3035                   FIF_ALLMULTI |
3036                   FIF_FCSFAIL |
3037                   FIF_PLCPFAIL |
3038                   FIF_CONTROL |
3039                   FIF_OTHER_BSS |
3040                   FIF_BCN_PRBRESP_PROMISC;
3041
3042         changed &= FIF_PROMISC_IN_BSS |
3043                    FIF_ALLMULTI |
3044                    FIF_FCSFAIL |
3045                    FIF_PLCPFAIL |
3046                    FIF_CONTROL |
3047                    FIF_OTHER_BSS |
3048                    FIF_BCN_PRBRESP_PROMISC;
3049
3050         wl->filter_flags = *fflags;
3051
3052         if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
3053                 b43_adjust_opmode(dev);
3054         spin_unlock_irqrestore(&wl->irq_lock, flags);
3055 }
3056
3057 static int b43_op_config_interface(struct ieee80211_hw *hw,
3058                                    struct ieee80211_vif *vif,
3059                                    struct ieee80211_if_conf *conf)
3060 {
3061         struct b43_wl *wl = hw_to_b43_wl(hw);
3062         struct b43_wldev *dev = wl->current_dev;
3063         unsigned long flags;
3064
3065         if (!dev)
3066                 return -ENODEV;
3067         mutex_lock(&wl->mutex);
3068         spin_lock_irqsave(&wl->irq_lock, flags);
3069         B43_WARN_ON(wl->vif != vif);
3070         if (conf->bssid)
3071                 memcpy(wl->bssid, conf->bssid, ETH_ALEN);
3072         else
3073                 memset(wl->bssid, 0, ETH_ALEN);
3074         if (b43_status(dev) >= B43_STAT_INITIALIZED) {
3075                 if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) {
3076                         B43_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP);
3077                         b43_set_ssid(dev, conf->ssid, conf->ssid_len);
3078                         if (conf->beacon)
3079                                 b43_update_templates(wl, conf->beacon);
3080                 }
3081                 b43_write_mac_bssid_templates(dev);
3082         }
3083         spin_unlock_irqrestore(&wl->irq_lock, flags);
3084         mutex_unlock(&wl->mutex);
3085
3086         return 0;
3087 }
3088
3089 /* Locking: wl->mutex */
3090 static void b43_wireless_core_stop(struct b43_wldev *dev)
3091 {
3092         struct b43_wl *wl = dev->wl;
3093         unsigned long flags;
3094
3095         if (b43_status(dev) < B43_STAT_STARTED)
3096                 return;
3097
3098         /* Disable and sync interrupts. We must do this before than
3099          * setting the status to INITIALIZED, as the interrupt handler
3100          * won't care about IRQs then. */
3101         spin_lock_irqsave(&wl->irq_lock, flags);
3102         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
3103         b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
3104         spin_unlock_irqrestore(&wl->irq_lock, flags);
3105         b43_synchronize_irq(dev);
3106
3107         b43_set_status(dev, B43_STAT_INITIALIZED);
3108
3109         mutex_unlock(&wl->mutex);
3110         /* Must unlock as it would otherwise deadlock. No races here.
3111          * Cancel the possibly running self-rearming periodic work. */
3112         cancel_delayed_work_sync(&dev->periodic_work);
3113         mutex_lock(&wl->mutex);
3114
3115         ieee80211_stop_queues(wl->hw);  //FIXME this could cause a deadlock, as mac80211 seems buggy.
3116
3117         b43_mac_suspend(dev);
3118         free_irq(dev->dev->irq, dev);
3119         b43dbg(wl, "Wireless interface stopped\n");
3120 }
3121
3122 /* Locking: wl->mutex */
3123 static int b43_wireless_core_start(struct b43_wldev *dev)
3124 {
3125         int err;
3126
3127         B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
3128
3129         drain_txstatus_queue(dev);
3130         err = request_irq(dev->dev->irq, b43_interrupt_handler,
3131                           IRQF_SHARED, KBUILD_MODNAME, dev);
3132         if (err) {
3133                 b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
3134                 goto out;
3135         }
3136
3137         /* We are ready to run. */
3138         b43_set_status(dev, B43_STAT_STARTED);
3139
3140         /* Start data flow (TX/RX). */
3141         b43_mac_enable(dev);
3142         b43_interrupt_enable(dev, dev->irq_savedstate);
3143         ieee80211_start_queues(dev->wl->hw);
3144
3145         /* Start maintainance work */
3146         b43_periodic_tasks_setup(dev);
3147
3148         b43dbg(dev->wl, "Wireless interface started\n");
3149       out:
3150         return err;
3151 }
3152
3153 /* Get PHY and RADIO versioning numbers */
3154 static int b43_phy_versioning(struct b43_wldev *dev)
3155 {
3156         struct b43_phy *phy = &dev->phy;
3157         u32 tmp;
3158         u8 analog_type;
3159         u8 phy_type;
3160         u8 phy_rev;
3161         u16 radio_manuf;
3162         u16 radio_ver;
3163         u16 radio_rev;
3164         int unsupported = 0;
3165
3166         /* Get PHY versioning */
3167         tmp = b43_read16(dev, B43_MMIO_PHY_VER);
3168         analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT;
3169         phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
3170         phy_rev = (tmp & B43_PHYVER_VERSION);
3171         switch (phy_type) {
3172         case B43_PHYTYPE_A:
3173                 if (phy_rev >= 4)
3174                         unsupported = 1;
3175                 break;
3176         case B43_PHYTYPE_B:
3177                 if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6
3178                     && phy_rev != 7)
3179                         unsupported = 1;
3180                 break;
3181         case B43_PHYTYPE_G:
3182                 if (phy_rev > 9)
3183                         unsupported = 1;
3184                 break;
3185 #ifdef CONFIG_B43_NPHY
3186         case B43_PHYTYPE_N:
3187                 if (phy_rev > 1)
3188                         unsupported = 1;
3189                 break;
3190 #endif
3191         default:
3192                 unsupported = 1;
3193         };
3194         if (unsupported) {
3195                 b43err(dev->wl, "FOUND UNSUPPORTED PHY "
3196                        "(Analog %u, Type %u, Revision %u)\n",
3197                        analog_type, phy_type, phy_rev);
3198                 return -EOPNOTSUPP;
3199         }
3200         b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
3201                analog_type, phy_type, phy_rev);
3202
3203         /* Get RADIO versioning */
3204         if (dev->dev->bus->chip_id == 0x4317) {
3205                 if (dev->dev->bus->chip_rev == 0)
3206                         tmp = 0x3205017F;
3207                 else if (dev->dev->bus->chip_rev == 1)
3208                         tmp = 0x4205017F;
3209                 else
3210                         tmp = 0x5205017F;
3211         } else {
3212                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3213                 tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
3214                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3215                 tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16;
3216         }
3217         radio_manuf = (tmp & 0x00000FFF);
3218         radio_ver = (tmp & 0x0FFFF000) >> 12;
3219         radio_rev = (tmp & 0xF0000000) >> 28;
3220         if (radio_manuf != 0x17F /* Broadcom */)
3221                 unsupported = 1;
3222         switch (phy_type) {
3223         case B43_PHYTYPE_A:
3224                 if (radio_ver != 0x2060)
3225                         unsupported = 1;
3226                 if (radio_rev != 1)
3227                         unsupported = 1;
3228                 if (radio_manuf != 0x17F)
3229                         unsupported = 1;
3230                 break;
3231         case B43_PHYTYPE_B:
3232                 if ((radio_ver & 0xFFF0) != 0x2050)
3233                         unsupported = 1;
3234                 break;
3235         case B43_PHYTYPE_G:
3236                 if (radio_ver != 0x2050)
3237                         unsupported = 1;
3238                 break;
3239         case B43_PHYTYPE_N:
3240                 if (radio_ver != 0x2055)
3241                         unsupported = 1;
3242                 break;
3243         default:
3244                 B43_WARN_ON(1);
3245         }
3246         if (unsupported) {
3247                 b43err(dev->wl, "FOUND UNSUPPORTED RADIO "
3248                        "(Manuf 0x%X, Version 0x%X, Revision %u)\n",
3249                        radio_manuf, radio_ver, radio_rev);
3250                 return -EOPNOTSUPP;
3251         }
3252         b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n",
3253                radio_manuf, radio_ver, radio_rev);
3254
3255         phy->radio_manuf = radio_manuf;
3256         phy->radio_ver = radio_ver;
3257         phy->radio_rev = radio_rev;
3258
3259         phy->analog = analog_type;
3260         phy->type = phy_type;
3261         phy->rev = phy_rev;
3262
3263         return 0;
3264 }
3265
3266 static void setup_struct_phy_for_init(struct b43_wldev *dev,
3267                                       struct b43_phy *phy)
3268 {
3269         struct b43_txpower_lo_control *lo;
3270         int i;
3271
3272         memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
3273         memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
3274
3275         phy->aci_enable = 0;
3276         phy->aci_wlan_automatic = 0;
3277         phy->aci_hw_rssi = 0;
3278
3279         phy->radio_off_context.valid = 0;
3280
3281         lo = phy->lo_control;
3282         if (lo) {
3283                 memset(lo, 0, sizeof(*(phy->lo_control)));
3284                 lo->rebuild = 1;
3285                 lo->tx_bias = 0xFF;
3286         }
3287         phy->max_lb_gain = 0;
3288         phy->trsw_rx_gain = 0;
3289         phy->txpwr_offset = 0;
3290
3291         /* NRSSI */
3292         phy->nrssislope = 0;
3293         for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
3294                 phy->nrssi[i] = -1000;
3295         for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
3296                 phy->nrssi_lt[i] = i;
3297
3298         phy->lofcal = 0xFFFF;
3299         phy->initval = 0xFFFF;
3300
3301         phy->interfmode = B43_INTERFMODE_NONE;
3302         phy->channel = 0xFF;
3303
3304         phy->hardware_power_control = !!modparam_hwpctl;
3305
3306         /* PHY TX errors counter. */
3307         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
3308
3309         /* OFDM-table address caching. */
3310         phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN;
3311 }
3312
3313 static void setup_struct_wldev_for_init(struct b43_wldev *dev)
3314 {
3315         dev->dfq_valid = 0;
3316
3317         /* Assume the radio is enabled. If it's not enabled, the state will
3318          * immediately get fixed on the first periodic work run. */
3319         dev->radio_hw_enable = 1;
3320
3321         /* Stats */
3322         memset(&dev->stats, 0, sizeof(dev->stats));
3323
3324         setup_struct_phy_for_init(dev, &dev->phy);
3325
3326         /* IRQ related flags */
3327         dev->irq_reason = 0;
3328         memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
3329         dev->irq_savedstate = B43_IRQ_MASKTEMPLATE;
3330
3331         dev->mac_suspended = 1;
3332
3333         /* Noise calculation context */
3334         memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
3335 }
3336
3337 static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
3338 {
3339         struct ssb_sprom *sprom = &dev->dev->bus->sprom;
3340         u32 hf;
3341
3342         if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
3343                 return;
3344         if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
3345                 return;
3346
3347         hf = b43_hf_read(dev);
3348         if (sprom->boardflags_lo & B43_BFL_BTCMOD)
3349                 hf |= B43_HF_BTCOEXALT;
3350         else
3351                 hf |= B43_HF_BTCOEX;
3352         b43_hf_write(dev, hf);
3353         //TODO
3354 }
3355
3356 static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
3357 {                               //TODO
3358 }
3359
3360 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
3361 {
3362 #ifdef CONFIG_SSB_DRIVER_PCICORE
3363         struct ssb_bus *bus = dev->dev->bus;
3364         u32 tmp;
3365
3366         if (bus->pcicore.dev &&
3367             bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
3368             bus->pcicore.dev->id.revision <= 5) {
3369                 /* IMCFGLO timeouts workaround. */
3370                 tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
3371                 tmp &= ~SSB_IMCFGLO_REQTO;
3372                 tmp &= ~SSB_IMCFGLO_SERTO;
3373                 switch (bus->bustype) {
3374                 case SSB_BUSTYPE_PCI:
3375                 case SSB_BUSTYPE_PCMCIA:
3376                         tmp |= 0x32;
3377                         break;
3378                 case SSB_BUSTYPE_SSB:
3379                         tmp |= 0x53;
3380                         break;
3381                 }
3382                 ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
3383         }
3384 #endif /* CONFIG_SSB_DRIVER_PCICORE */
3385 }
3386
3387 /* Write the short and long frame retry limit values. */
3388 static void b43_set_retry_limits(struct b43_wldev *dev,
3389                                  unsigned int short_retry,
3390                                  unsigned int long_retry)
3391 {
3392         /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
3393          * the chip-internal counter. */
3394         short_retry = min(short_retry, (unsigned int)0xF);
3395         long_retry = min(long_retry, (unsigned int)0xF);
3396
3397         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
3398                         short_retry);
3399         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
3400                         long_retry);
3401 }
3402
3403 /* Shutdown a wireless core */
3404 /* Locking: wl->mutex */
3405 static void b43_wireless_core_exit(struct b43_wldev *dev)
3406 {
3407         struct b43_phy *phy = &dev->phy;
3408         u32 macctl;
3409
3410         B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED);
3411         if (b43_status(dev) != B43_STAT_INITIALIZED)
3412                 return;
3413         b43_set_status(dev, B43_STAT_UNINIT);
3414
3415         /* Stop the microcode PSM. */
3416         macctl = b43_read32(dev, B43_MMIO_MACCTL);
3417         macctl &= ~B43_MACCTL_PSM_RUN;
3418         macctl |= B43_MACCTL_PSM_JMP0;
3419         b43_write32(dev, B43_MMIO_MACCTL, macctl);
3420
3421         if (!dev->suspend_in_progress) {
3422                 b43_leds_exit(dev);
3423                 b43_rng_exit(dev->wl, false);
3424         }
3425         b43_dma_free(dev);
3426         b43_chip_exit(dev);
3427         b43_radio_turn_off(dev, 1);
3428         b43_switch_analog(dev, 0);
3429         if (phy->dyn_tssi_tbl)
3430                 kfree(phy->tssi2dbm);
3431         kfree(phy->lo_control);
3432         phy->lo_control = NULL;
3433         if (dev->wl->current_beacon) {
3434                 dev_kfree_skb_any(dev->wl->current_beacon);
3435                 dev->wl->current_beacon = NULL;
3436         }
3437
3438         ssb_device_disable(dev->dev, 0);
3439         ssb_bus_may_powerdown(dev->dev->bus);
3440 }
3441
3442 /* Initialize a wireless core */
3443 static int b43_wireless_core_init(struct b43_wldev *dev)
3444 {
3445         struct b43_wl *wl = dev->wl;
3446         struct ssb_bus *bus = dev->dev->bus;
3447         struct ssb_sprom *sprom = &bus->sprom;
3448         struct b43_phy *phy = &dev->phy;
3449         int err;
3450         u32 hf, tmp;
3451
3452         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
3453
3454         err = ssb_bus_powerup(bus, 0);
3455         if (err)
3456                 goto out;
3457         if (!ssb_device_is_enabled(dev->dev)) {
3458                 tmp = phy->gmode ? B43_TMSLOW_GMODE : 0;
3459                 b43_wireless_core_reset(dev, tmp);
3460         }
3461
3462         if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) {
3463                 phy->lo_control =
3464                     kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL);
3465                 if (!phy->lo_control) {
3466                         err = -ENOMEM;
3467                         goto err_busdown;
3468                 }
3469         }
3470         setup_struct_wldev_for_init(dev);
3471
3472         err = b43_phy_init_tssi2dbm_table(dev);
3473         if (err)
3474                 goto err_kfree_lo_control;
3475
3476         /* Enable IRQ routing to this device. */
3477         ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
3478
3479         b43_imcfglo_timeouts_workaround(dev);
3480         b43_bluetooth_coext_disable(dev);
3481         b43_phy_early_init(dev);
3482         err = b43_chip_init(dev);
3483         if (err)
3484                 goto err_kfree_tssitbl;
3485         b43_shm_write16(dev, B43_SHM_SHARED,
3486                         B43_SHM_SH_WLCOREREV, dev->dev->id.revision);
3487         hf = b43_hf_read(dev);
3488         if (phy->type == B43_PHYTYPE_G) {
3489                 hf |= B43_HF_SYMW;
3490                 if (phy->rev == 1)
3491                         hf |= B43_HF_GDCW;
3492                 if (sprom->boardflags_lo & B43_BFL_PACTRL)
3493                         hf |= B43_HF_OFDMPABOOST;
3494         } else if (phy->type == B43_PHYTYPE_B) {
3495                 hf |= B43_HF_SYMW;
3496                 if (phy->rev >= 2 && phy->radio_ver == 0x2050)
3497                         hf &= ~B43_HF_GDCW;
3498         }
3499         b43_hf_write(dev, hf);
3500
3501         b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT,
3502                              B43_DEFAULT_LONG_RETRY_LIMIT);
3503         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3);
3504         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2);
3505
3506         /* Disable sending probe responses from firmware.
3507          * Setting the MaxTime to one usec will always trigger
3508          * a timeout, so we never send any probe resp.
3509          * A timeout of zero is infinite. */
3510         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1);
3511
3512         b43_rate_memory_init(dev);
3513
3514         /* Minimum Contention Window */
3515         if (phy->type == B43_PHYTYPE_B) {
3516                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F);
3517         } else {
3518                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF);
3519         }
3520         /* Maximum Contention Window */
3521         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
3522
3523         err = b43_dma_init(dev);
3524         if (err)
3525                 goto err_chip_exit;
3526         b43_qos_init(dev);
3527
3528 //FIXME
3529 #if 1
3530         b43_write16(dev, 0x0612, 0x0050);
3531         b43_shm_write16(dev, B43_SHM_SHARED, 0x0416, 0x0050);
3532         b43_shm_write16(dev, B43_SHM_SHARED, 0x0414, 0x01F4);
3533 #endif
3534
3535         b43_bluetooth_coext_enable(dev);
3536
3537         ssb_bus_powerup(bus, 1);        /* Enable dynamic PCTL */
3538         b43_upload_card_macaddress(dev);
3539         b43_security_init(dev);
3540         if (!dev->suspend_in_progress)
3541                 b43_rng_init(wl);
3542
3543         b43_set_status(dev, B43_STAT_INITIALIZED);
3544
3545         if (!dev->suspend_in_progress)
3546                 b43_leds_init(dev);
3547 out:
3548         return err;
3549
3550       err_chip_exit:
3551         b43_chip_exit(dev);
3552       err_kfree_tssitbl:
3553         if (phy->dyn_tssi_tbl)
3554                 kfree(phy->tssi2dbm);
3555       err_kfree_lo_control:
3556         kfree(phy->lo_control);
3557         phy->lo_control = NULL;
3558       err_busdown:
3559         ssb_bus_may_powerdown(bus);
3560         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
3561         return err;
3562 }
3563
3564 static int b43_op_add_interface(struct ieee80211_hw *hw,
3565                                 struct ieee80211_if_init_conf *conf)
3566 {
3567         struct b43_wl *wl = hw_to_b43_wl(hw);
3568         struct b43_wldev *dev;
3569         unsigned long flags;
3570         int err = -EOPNOTSUPP;
3571
3572         /* TODO: allow WDS/AP devices to coexist */
3573
3574         if (conf->type != IEEE80211_IF_TYPE_AP &&
3575             conf->type != IEEE80211_IF_TYPE_STA &&
3576             conf->type != IEEE80211_IF_TYPE_WDS &&
3577             conf->type != IEEE80211_IF_TYPE_IBSS)
3578                 return -EOPNOTSUPP;
3579
3580         mutex_lock(&wl->mutex);
3581         if (wl->operating)
3582                 goto out_mutex_unlock;
3583
3584         b43dbg(wl, "Adding Interface type %d\n", conf->type);
3585
3586         dev = wl->current_dev;
3587         wl->operating = 1;
3588         wl->vif = conf->vif;
3589         wl->if_type = conf->type;
3590         memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
3591
3592         spin_lock_irqsave(&wl->irq_lock, flags);
3593         b43_adjust_opmode(dev);
3594         b43_upload_card_macaddress(dev);
3595         spin_unlock_irqrestore(&wl->irq_lock, flags);
3596
3597         err = 0;
3598  out_mutex_unlock:
3599         mutex_unlock(&wl->mutex);
3600
3601         return err;
3602 }
3603
3604 static void b43_op_remove_interface(struct ieee80211_hw *hw,
3605                                     struct ieee80211_if_init_conf *conf)
3606 {
3607         struct b43_wl *wl = hw_to_b43_wl(hw);
3608         struct b43_wldev *dev = wl->current_dev;
3609         unsigned long flags;
3610
3611         b43dbg(wl, "Removing Interface type %d\n", conf->type);
3612
3613         mutex_lock(&wl->mutex);
3614
3615         B43_WARN_ON(!wl->operating);
3616         B43_WARN_ON(wl->vif != conf->vif);
3617         wl->vif = NULL;
3618
3619         wl->operating = 0;
3620
3621         spin_lock_irqsave(&wl->irq_lock, flags);
3622         b43_adjust_opmode(dev);
3623         memset(wl->mac_addr, 0, ETH_ALEN);
3624         b43_upload_card_macaddress(dev);
3625         spin_unlock_irqrestore(&wl->irq_lock, flags);
3626
3627         mutex_unlock(&wl->mutex);
3628 }
3629
3630 static int b43_op_start(struct ieee80211_hw *hw)
3631 {
3632         struct b43_wl *wl = hw_to_b43_wl(hw);
3633         struct b43_wldev *dev = wl->current_dev;
3634         int did_init = 0;
3635         int err = 0;
3636         bool do_rfkill_exit = 0;
3637
3638         /* Kill all old instance specific information to make sure
3639          * the card won't use it in the short timeframe between start
3640          * and mac80211 reconfiguring it. */
3641         memset(wl->bssid, 0, ETH_ALEN);
3642         memset(wl->mac_addr, 0, ETH_ALEN);
3643         wl->filter_flags = 0;
3644         wl->radiotap_enabled = 0;
3645
3646         /* First register RFkill.
3647          * LEDs that are registered later depend on it. */
3648         b43_rfkill_init(dev);
3649
3650         mutex_lock(&wl->mutex);
3651
3652         if (b43_status(dev) < B43_STAT_INITIALIZED) {
3653                 err = b43_wireless_core_init(dev);
3654                 if (err) {
3655                         do_rfkill_exit = 1;
3656                         goto out_mutex_unlock;
3657                 }
3658                 did_init = 1;
3659         }
3660
3661         if (b43_status(dev) < B43_STAT_STARTED) {
3662                 err = b43_wireless_core_start(dev);
3663                 if (err) {
3664                         if (did_init)
3665                                 b43_wireless_core_exit(dev);
3666                         do_rfkill_exit = 1;
3667                         goto out_mutex_unlock;
3668                 }
3669         }
3670
3671  out_mutex_unlock:
3672         mutex_unlock(&wl->mutex);
3673
3674         if (do_rfkill_exit)
3675                 b43_rfkill_exit(dev);
3676
3677         return err;
3678 }
3679
3680 static void b43_op_stop(struct ieee80211_hw *hw)
3681 {
3682         struct b43_wl *wl = hw_to_b43_wl(hw);
3683         struct b43_wldev *dev = wl->current_dev;
3684
3685         b43_rfkill_exit(dev);
3686
3687         mutex_lock(&wl->mutex);
3688         if (b43_status(dev) >= B43_STAT_STARTED)
3689                 b43_wireless_core_stop(dev);
3690         b43_wireless_core_exit(dev);
3691         mutex_unlock(&wl->mutex);
3692 }
3693
3694 static int b43_op_set_retry_limit(struct ieee80211_hw *hw,
3695                                   u32 short_retry_limit, u32 long_retry_limit)
3696 {
3697         struct b43_wl *wl = hw_to_b43_wl(hw);
3698         struct b43_wldev *dev;
3699         int err = 0;
3700
3701         mutex_lock(&wl->mutex);
3702         dev = wl->current_dev;
3703         if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) {
3704                 err = -ENODEV;
3705                 goto out_unlock;
3706         }
3707         b43_set_retry_limits(dev, short_retry_limit, long_retry_limit);
3708 out_unlock:
3709         mutex_unlock(&wl->mutex);
3710
3711         return err;
3712 }
3713
3714 static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set)
3715 {
3716         struct b43_wl *wl = hw_to_b43_wl(hw);
3717         struct sk_buff *beacon;
3718         unsigned long flags;
3719
3720         /* We could modify the existing beacon and set the aid bit in
3721          * the TIM field, but that would probably require resizing and
3722          * moving of data within the beacon template.
3723          * Simply request a new beacon and let mac80211 do the hard work. */
3724         beacon = ieee80211_beacon_get(hw, wl->vif, NULL);
3725         if (unlikely(!beacon))
3726                 return -ENOMEM;
3727         spin_lock_irqsave(&wl->irq_lock, flags);
3728         b43_update_templates(wl, beacon);
3729         spin_unlock_irqrestore(&wl->irq_lock, flags);
3730
3731         return 0;
3732 }
3733
3734 static int b43_op_ibss_beacon_update(struct ieee80211_hw *hw,
3735                                      struct sk_buff *beacon,
3736                                      struct ieee80211_tx_control *ctl)
3737 {
3738         struct b43_wl *wl = hw_to_b43_wl(hw);
3739         unsigned long flags;
3740
3741         spin_lock_irqsave(&wl->irq_lock, flags);
3742         b43_update_templates(wl, beacon);
3743         spin_unlock_irqrestore(&wl->irq_lock, flags);
3744
3745         return 0;
3746 }
3747
3748 static const struct ieee80211_ops b43_hw_ops = {
3749         .tx                     = b43_op_tx,
3750         .conf_tx                = b43_op_conf_tx,
3751         .add_interface          = b43_op_add_interface,
3752         .remove_interface       = b43_op_remove_interface,
3753         .config                 = b43_op_config,
3754         .config_interface       = b43_op_config_interface,
3755         .configure_filter       = b43_op_configure_filter,
3756         .set_key                = b43_op_set_key,
3757         .get_stats              = b43_op_get_stats,
3758         .get_tx_stats           = b43_op_get_tx_stats,
3759         .start                  = b43_op_start,
3760         .stop                   = b43_op_stop,
3761         .set_retry_limit        = b43_op_set_retry_limit,
3762         .set_tim                = b43_op_beacon_set_tim,
3763         .beacon_update          = b43_op_ibss_beacon_update,
3764 };
3765
3766 /* Hard-reset the chip. Do not call this directly.
3767  * Use b43_controller_restart()
3768  */
3769 static void b43_chip_reset(struct work_struct *work)
3770 {
3771         struct b43_wldev *dev =
3772             container_of(work, struct b43_wldev, restart_work);
3773         struct b43_wl *wl = dev->wl;
3774         int err = 0;
3775         int prev_status;
3776
3777         mutex_lock(&wl->mutex);
3778
3779         prev_status = b43_status(dev);
3780         /* Bring the device down... */
3781         if (prev_status >= B43_STAT_STARTED)
3782                 b43_wireless_core_stop(dev);
3783         if (prev_status >= B43_STAT_INITIALIZED)
3784                 b43_wireless_core_exit(dev);
3785
3786         /* ...and up again. */
3787         if (prev_status >= B43_STAT_INITIALIZED) {
3788                 err = b43_wireless_core_init(dev);
3789                 if (err)
3790                         goto out;
3791         }
3792         if (prev_status >= B43_STAT_STARTED) {
3793                 err = b43_wireless_core_start(dev);
3794                 if (err) {
3795                         b43_wireless_core_exit(dev);
3796                         goto out;
3797                 }
3798         }
3799       out:
3800         mutex_unlock(&wl->mutex);
3801         if (err)
3802                 b43err(wl, "Controller restart FAILED\n");
3803         else
3804                 b43info(wl, "Controller restarted\n");
3805 }
3806
3807 static int b43_setup_modes(struct b43_wldev *dev,
3808                            bool have_2ghz_phy, bool have_5ghz_phy)
3809 {
3810         struct ieee80211_hw *hw = dev->wl->hw;
3811         struct ieee80211_hw_mode *mode;
3812         struct b43_phy *phy = &dev->phy;
3813         int err;
3814
3815         /* XXX: This function will go away soon, when mac80211
3816          *      band stuff is rewritten. So this is just a hack.
3817          *      For now we always claim GPHY mode, as there is no
3818          *      support for NPHY and APHY in the device, yet.
3819          *      This assumption is OK, as any B, N or A PHY will already
3820          *      have died a horrible sanity check death earlier. */
3821
3822         mode = &phy->hwmodes[0];
3823         mode->mode = MODE_IEEE80211G;
3824         mode->num_channels = b43_2ghz_chantable_size;
3825         mode->channels = b43_2ghz_chantable;
3826         mode->num_rates = b43_g_ratetable_size;
3827         mode->rates = b43_g_ratetable;
3828         err = ieee80211_register_hwmode(hw, mode);
3829         if (err)
3830                 return err;
3831         phy->possible_phymodes |= B43_PHYMODE_G;
3832
3833         return 0;
3834 }
3835
3836 static void b43_wireless_core_detach(struct b43_wldev *dev)
3837 {
3838         /* We release firmware that late to not be required to re-request
3839          * is all the time when we reinit the core. */
3840         b43_release_firmware(dev);
3841 }
3842
3843 static int b43_wireless_core_attach(struct b43_wldev *dev)
3844 {
3845         struct b43_wl *wl = dev->wl;
3846         struct ssb_bus *bus = dev->dev->bus;
3847         struct pci_dev *pdev = bus->host_pci;
3848         int err;
3849         bool have_2ghz_phy = 0, have_5ghz_phy = 0;
3850         u32 tmp;
3851
3852         /* Do NOT do any device initialization here.
3853          * Do it in wireless_core_init() instead.
3854          * This function is for gathering basic information about the HW, only.
3855          * Also some structs may be set up here. But most likely you want to have
3856          * that in core_init(), too.
3857          */
3858
3859         err = ssb_bus_powerup(bus, 0);
3860         if (err) {
3861                 b43err(wl, "Bus powerup failed\n");
3862                 goto out;
3863         }
3864         /* Get the PHY type. */
3865         if (dev->dev->id.revision >= 5) {
3866                 u32 tmshigh;
3867
3868                 tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
3869                 have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY);
3870                 have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY);
3871         } else
3872                 B43_WARN_ON(1);
3873
3874         dev->phy.gmode = have_2ghz_phy;
3875         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
3876         b43_wireless_core_reset(dev, tmp);
3877
3878         err = b43_phy_versioning(dev);
3879         if (err)
3880                 goto err_powerdown;
3881         /* Check if this device supports multiband. */
3882         if (!pdev ||
3883             (pdev->device != 0x4312 &&
3884              pdev->device != 0x4319 && pdev->device != 0x4324)) {
3885                 /* No multiband support. */
3886                 have_2ghz_phy = 0;
3887                 have_5ghz_phy = 0;
3888                 switch (dev->phy.type) {
3889                 case B43_PHYTYPE_A:
3890                         have_5ghz_phy = 1;
3891                         break;
3892                 case B43_PHYTYPE_G:
3893                 case B43_PHYTYPE_N:
3894                         have_2ghz_phy = 1;
3895                         break;
3896                 default:
3897                         B43_WARN_ON(1);
3898                 }
3899         }
3900         if (dev->phy.type == B43_PHYTYPE_A) {
3901                 /* FIXME */
3902                 b43err(wl, "IEEE 802.11a devices are unsupported\n");
3903                 err = -EOPNOTSUPP;
3904                 goto err_powerdown;
3905         }
3906         dev->phy.gmode = have_2ghz_phy;
3907         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
3908         b43_wireless_core_reset(dev, tmp);
3909
3910         err = b43_validate_chipaccess(dev);
3911         if (err)
3912                 goto err_powerdown;
3913         err = b43_setup_modes(dev, have_2ghz_phy, have_5ghz_phy);
3914         if (err)
3915                 goto err_powerdown;
3916
3917         /* Now set some default "current_dev" */
3918         if (!wl->current_dev)
3919                 wl->current_dev = dev;
3920         INIT_WORK(&dev->restart_work, b43_chip_reset);
3921
3922         b43_radio_turn_off(dev, 1);
3923         b43_switch_analog(dev, 0);
3924         ssb_device_disable(dev->dev, 0);
3925         ssb_bus_may_powerdown(bus);
3926
3927 out:
3928         return err;
3929
3930 err_powerdown:
3931         ssb_bus_may_powerdown(bus);
3932         return err;
3933 }
3934
3935 static void b43_one_core_detach(struct ssb_device *dev)
3936 {
3937         struct b43_wldev *wldev;
3938         struct b43_wl *wl;
3939
3940         wldev = ssb_get_drvdata(dev);
3941         wl = wldev->wl;
3942         cancel_work_sync(&wldev->restart_work);
3943         b43_debugfs_remove_device(wldev);
3944         b43_wireless_core_detach(wldev);
3945         list_del(&wldev->list);
3946         wl->nr_devs--;
3947         ssb_set_drvdata(dev, NULL);
3948         kfree(wldev);
3949 }
3950
3951 static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
3952 {
3953         struct b43_wldev *wldev;
3954         struct pci_dev *pdev;
3955         int err = -ENOMEM;
3956
3957         if (!list_empty(&wl->devlist)) {
3958                 /* We are not the first core on this chip. */
3959                 pdev = dev->bus->host_pci;
3960                 /* Only special chips support more than one wireless
3961                  * core, although some of the other chips have more than
3962                  * one wireless core as well. Check for this and
3963                  * bail out early.
3964                  */
3965                 if (!pdev ||
3966                     ((pdev->device != 0x4321) &&
3967                      (pdev->device != 0x4313) && (pdev->device != 0x431A))) {
3968                         b43dbg(wl, "Ignoring unconnected 802.11 core\n");
3969                         return -ENODEV;
3970                 }
3971         }
3972
3973         wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
3974         if (!wldev)
3975                 goto out;
3976
3977         wldev->dev = dev;
3978         wldev->wl = wl;
3979         b43_set_status(wldev, B43_STAT_UNINIT);
3980         wldev->bad_frames_preempt = modparam_bad_frames_preempt;
3981         tasklet_init(&wldev->isr_tasklet,
3982                      (void (*)(unsigned long))b43_interrupt_tasklet,
3983                      (unsigned long)wldev);
3984         INIT_LIST_HEAD(&wldev->list);
3985
3986         err = b43_wireless_core_attach(wldev);
3987         if (err)
3988                 goto err_kfree_wldev;
3989
3990         list_add(&wldev->list, &wl->devlist);
3991         wl->nr_devs++;
3992         ssb_set_drvdata(dev, wldev);
3993         b43_debugfs_add_device(wldev);
3994
3995       out:
3996         return err;
3997
3998       err_kfree_wldev:
3999         kfree(wldev);
4000         return err;
4001 }
4002
4003 static void b43_sprom_fixup(struct ssb_bus *bus)
4004 {
4005         /* boardflags workarounds */
4006         if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
4007             bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
4008                 bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
4009         if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
4010             bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
4011                 bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
4012 }
4013
4014 static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
4015 {
4016         struct ieee80211_hw *hw = wl->hw;
4017
4018         ssb_set_devtypedata(dev, NULL);
4019         ieee80211_free_hw(hw);
4020 }
4021
4022 static int b43_wireless_init(struct ssb_device *dev)
4023 {
4024         struct ssb_sprom *sprom = &dev->bus->sprom;
4025         struct ieee80211_hw *hw;
4026         struct b43_wl *wl;
4027         int err = -ENOMEM;
4028
4029         b43_sprom_fixup(dev->bus);
4030
4031         hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops);
4032         if (!hw) {
4033                 b43err(NULL, "Could not allocate ieee80211 device\n");
4034                 goto out;
4035         }
4036
4037         /* fill hw info */
4038         hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
4039                     IEEE80211_HW_RX_INCLUDES_FCS;
4040         hw->max_signal = 100;
4041         hw->max_rssi = -110;
4042         hw->max_noise = -110;
4043         hw->queues = 1;         /* FIXME: hardware has more queues */
4044         SET_IEEE80211_DEV(hw, dev->dev);
4045         if (is_valid_ether_addr(sprom->et1mac))
4046                 SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
4047         else
4048                 SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
4049
4050         /* Get and initialize struct b43_wl */
4051         wl = hw_to_b43_wl(hw);
4052         memset(wl, 0, sizeof(*wl));
4053         wl->hw = hw;
4054         spin_lock_init(&wl->irq_lock);
4055         spin_lock_init(&wl->leds_lock);
4056         spin_lock_init(&wl->shm_lock);
4057         mutex_init(&wl->mutex);
4058         INIT_LIST_HEAD(&wl->devlist);
4059
4060         ssb_set_devtypedata(dev, wl);
4061         b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
4062         err = 0;
4063       out:
4064         return err;
4065 }
4066
4067 static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
4068 {
4069         struct b43_wl *wl;
4070         int err;
4071         int first = 0;
4072
4073         wl = ssb_get_devtypedata(dev);
4074         if (!wl) {
4075                 /* Probing the first core. Must setup common struct b43_wl */
4076                 first = 1;
4077                 err = b43_wireless_init(dev);
4078                 if (err)
4079                         goto out;
4080                 wl = ssb_get_devtypedata(dev);
4081                 B43_WARN_ON(!wl);
4082         }
4083         err = b43_one_core_attach(dev, wl);
4084         if (err)
4085                 goto err_wireless_exit;
4086
4087         if (first) {
4088                 err = ieee80211_register_hw(wl->hw);
4089                 if (err)
4090                         goto err_one_core_detach;
4091         }
4092
4093       out:
4094         return err;
4095
4096       err_one_core_detach:
4097         b43_one_core_detach(dev);
4098       err_wireless_exit:
4099         if (first)
4100                 b43_wireless_exit(dev, wl);
4101         return err;
4102 }
4103
4104 static void b43_remove(struct ssb_device *dev)
4105 {
4106         struct b43_wl *wl = ssb_get_devtypedata(dev);
4107         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4108
4109         B43_WARN_ON(!wl);
4110         if (wl->current_dev == wldev)
4111                 ieee80211_unregister_hw(wl->hw);
4112
4113         b43_one_core_detach(dev);
4114
4115         if (list_empty(&wl->devlist)) {
4116                 /* Last core on the chip unregistered.
4117                  * We can destroy common struct b43_wl.
4118                  */
4119                 b43_wireless_exit(dev, wl);
4120         }
4121 }
4122
4123 /* Perform a hardware reset. This can be called from any context. */
4124 void b43_controller_restart(struct b43_wldev *dev, const char *reason)
4125 {
4126         /* Must avoid requeueing, if we are in shutdown. */
4127         if (b43_status(dev) < B43_STAT_INITIALIZED)
4128                 return;
4129         b43info(dev->wl, "Controller RESET (%s) ...\n", reason);
4130         queue_work(dev->wl->hw->workqueue, &dev->restart_work);
4131 }
4132
4133 #ifdef CONFIG_PM
4134
4135 static int b43_suspend(struct ssb_device *dev, pm_message_t state)
4136 {
4137         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4138         struct b43_wl *wl = wldev->wl;
4139
4140         b43dbg(wl, "Suspending...\n");
4141
4142         mutex_lock(&wl->mutex);
4143         wldev->suspend_in_progress = true;
4144         wldev->suspend_init_status = b43_status(wldev);
4145         if (wldev->suspend_init_status >= B43_STAT_STARTED)
4146                 b43_wireless_core_stop(wldev);
4147         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED)
4148                 b43_wireless_core_exit(wldev);
4149         mutex_unlock(&wl->mutex);
4150
4151         b43dbg(wl, "Device suspended.\n");
4152
4153         return 0;
4154 }
4155
4156 static int b43_resume(struct ssb_device *dev)
4157 {
4158         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4159         struct b43_wl *wl = wldev->wl;
4160         int err = 0;
4161
4162         b43dbg(wl, "Resuming...\n");
4163
4164         mutex_lock(&wl->mutex);
4165         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) {
4166                 err = b43_wireless_core_init(wldev);
4167                 if (err) {
4168                         b43err(wl, "Resume failed at core init\n");
4169                         goto out;
4170                 }
4171         }
4172         if (wldev->suspend_init_status >= B43_STAT_STARTED) {
4173                 err = b43_wireless_core_start(wldev);
4174                 if (err) {
4175                         b43_leds_exit(wldev);
4176                         b43_rng_exit(wldev->wl, true);
4177                         b43_wireless_core_exit(wldev);
4178                         b43err(wl, "Resume failed at core start\n");
4179                         goto out;
4180                 }
4181         }
4182         b43dbg(wl, "Device resumed.\n");
4183  out:
4184         wldev->suspend_in_progress = false;
4185         mutex_unlock(&wl->mutex);
4186         return err;
4187 }
4188
4189 #else /* CONFIG_PM */
4190 # define b43_suspend    NULL
4191 # define b43_resume     NULL
4192 #endif /* CONFIG_PM */
4193
4194 static struct ssb_driver b43_ssb_driver = {
4195         .name           = KBUILD_MODNAME,
4196         .id_table       = b43_ssb_tbl,
4197         .probe          = b43_probe,
4198         .remove         = b43_remove,
4199         .suspend        = b43_suspend,
4200         .resume         = b43_resume,
4201 };
4202
4203 static void b43_print_driverinfo(void)
4204 {
4205         const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
4206                    *feat_leds = "", *feat_rfkill = "";
4207
4208 #ifdef CONFIG_B43_PCI_AUTOSELECT
4209         feat_pci = "P";
4210 #endif
4211 #ifdef CONFIG_B43_PCMCIA
4212         feat_pcmcia = "M";
4213 #endif
4214 #ifdef CONFIG_B43_NPHY
4215         feat_nphy = "N";
4216 #endif
4217 #ifdef CONFIG_B43_LEDS
4218         feat_leds = "L";
4219 #endif
4220 #ifdef CONFIG_B43_RFKILL
4221         feat_rfkill = "R";
4222 #endif
4223         printk(KERN_INFO "Broadcom 43xx driver loaded "
4224                "[ Features: %s%s%s%s%s, Firmware-ID: "
4225                B43_SUPPORTED_FIRMWARE_ID " ]\n",
4226                feat_pci, feat_pcmcia, feat_nphy,
4227                feat_leds, feat_rfkill);
4228 }
4229
4230 static int __init b43_init(void)
4231 {
4232         int err;
4233
4234         b43_debugfs_init();
4235         err = b43_pcmcia_init();
4236         if (err)
4237                 goto err_dfs_exit;
4238         err = ssb_driver_register(&b43_ssb_driver);
4239         if (err)
4240                 goto err_pcmcia_exit;
4241         b43_print_driverinfo();
4242
4243         return err;
4244
4245 err_pcmcia_exit:
4246         b43_pcmcia_exit();
4247 err_dfs_exit:
4248         b43_debugfs_exit();
4249         return err;
4250 }
4251
4252 static void __exit b43_exit(void)
4253 {
4254         ssb_driver_unregister(&b43_ssb_driver);
4255         b43_pcmcia_exit();
4256         b43_debugfs_exit();
4257 }
4258
4259 module_init(b43_init)
4260 module_exit(b43_exit)