git.oblomov.eu Git - linux-2.6/blob - drivers/pci/hotplug/shpchp_pci.c

   1 /*
   2  * Standard Hot Plug Controller Driver
   3  *
   4  * Copyright (C) 1995,2001 Compaq Computer Corporation
   5  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
   6  * Copyright (C) 2001 IBM Corp.
   7  * Copyright (C) 2003-2004 Intel Corporation
   8  *
   9  * All rights reserved.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or (at
  14  * your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful, but
  17  * WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  19  * NON INFRINGEMENT.  See the GNU General Public License for more
  20  * details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25  *
  26  * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
  27  *
  28  */
  29
  30 #include <linux/config.h>
  31 #include <linux/module.h>
  32 #include <linux/kernel.h>
  33 #include <linux/types.h>
  34 #include <linux/slab.h>
  35 #include <linux/workqueue.h>
  36 #include <linux/proc_fs.h>
  37 #include <linux/pci.h>
  38 #include "../pci.h"
  39 #include "shpchp.h"
  40 #ifndef CONFIG_IA64
  41 #include "../../../arch/i386/pci/pci.h"    /* horrible hack showing how processor dependant we are... */
  42 #endif
  43
  44 int shpchp_configure_device (struct controller* ctrl, struct pci_func* func)
  45 {
  46         unsigned char bus;
  47         struct pci_bus *child;
  48         int num;
  49
  50         if (func->pci_dev == NULL)
  51                 func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
  52
  53         /* Still NULL ? Well then scan for it ! */
  54         if (func->pci_dev == NULL) {
  55                 num = pci_scan_slot(ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function));
  56                 if (num) {
  57                         dbg("%s: subordiante %p number %x\n", __FUNCTION__, ctrl->pci_dev->subordinate,
  58                                 ctrl->pci_dev->subordinate->number);
  59                         pci_bus_add_devices(ctrl->pci_dev->subordinate);
  60                 }
  61
  62                 func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
  63                 if (func->pci_dev == NULL) {
  64                         dbg("ERROR: pci_dev still null\n");
  65                         return 0;
  66                 }
  67         }
  68
  69         if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
  70                 pci_read_config_byte(func->pci_dev, PCI_SECONDARY_BUS, &bus);
  71                 child = pci_add_new_bus(func->pci_dev->bus, (func->pci_dev), bus);
  72                 pci_do_scan_bus(child);
  73
  74         }
  75
  76         return 0;
  77 }
  78
  79
  80 int shpchp_unconfigure_device(struct pci_func* func)
  81 {
  82         int rc = 0;
  83         int j;
  84
  85         dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus,
  86                                 func->device, func->function);
  87
  88         for (j=0; j<8 ; j++) {
  89                 struct pci_dev* temp = pci_find_slot(func->bus,
  90                                 (func->device << 3) | j);
  91                 if (temp) {
  92                         pci_remove_bus_device(temp);
  93                 }
  94         }
  95         return rc;
  96 }
  97
  98 /*
  99  * shpchp_set_irq
 100  *
 101  * @bus_num: bus number of PCI device
 102  * @dev_num: device number of PCI device
 103  * @slot: pointer to u8 where slot number will be returned
 104  */
 105 int shpchp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
 106 {
 107 #if defined(CONFIG_X86) && !defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_64)
 108         int rc;
 109         u16 temp_word;
 110         struct pci_dev fakedev;
 111         struct pci_bus fakebus;
 112
 113         fakedev.devfn = dev_num << 3;
 114         fakedev.bus = &fakebus;
 115         fakebus.number = bus_num;
 116         dbg("%s: dev %d, bus %d, pin %d, num %d\n",
 117             __FUNCTION__, dev_num, bus_num, int_pin, irq_num);
 118         rc = pcibios_set_irq_routing(&fakedev, int_pin - 0x0a, irq_num);
 119         dbg("%s: rc %d\n", __FUNCTION__, rc);
 120         if (!rc)
 121                 return !rc;
 122
 123         /* set the Edge Level Control Register (ELCR) */
 124         temp_word = inb(0x4d0);
 125         temp_word |= inb(0x4d1) << 8;
 126
 127         temp_word |= 0x01 << irq_num;
 128
 129         /* This should only be for x86 as it sets the Edge Level Control Register */
 130         outb((u8) (temp_word & 0xFF), 0x4d0);
 131         outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1);
 132 #endif
 133         return 0;
 134 }
 135
 136 /* More PCI configuration routines; this time centered around hotplug controller */
 137
 138
 139 /*
 140  * shpchp_save_config
 141  *
 142  * Reads configuration for all slots in a PCI bus and saves info.
 143  *
 144  * Note:  For non-hot plug busses, the slot # saved is the device #
 145  *
 146  * returns 0 if success
 147  */
 148 int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num)
 149 {
 150         int rc;
 151         u8 class_code;
 152         u8 header_type;
 153         u32 ID;
 154         u8 secondary_bus;
 155         struct pci_func *new_slot;
 156         int sub_bus;
 157         int FirstSupported;
 158         int LastSupported;
 159         int max_functions;
 160         int function;
 161         u8 DevError;
 162         int device = 0;
 163         int cloop = 0;
 164         int stop_it;
 165         int index;
 166         int is_hot_plug = num_ctlr_slots || first_device_num;
 167         struct pci_bus lpci_bus, *pci_bus;
 168
 169         dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
 170                                 num_ctlr_slots, first_device_num);
 171
 172         memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
 173         pci_bus = &lpci_bus;
 174
 175         dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
 176                                 num_ctlr_slots, first_device_num);
 177
 178         /*   Decide which slots are supported */
 179         if (is_hot_plug) {
 180                 /*********************************
 181                  *  is_hot_plug is the slot mask
 182                  *********************************/
 183                 FirstSupported = first_device_num;
 184                 LastSupported = FirstSupported + num_ctlr_slots - 1;
 185         } else {
 186                 FirstSupported = 0;
 187                 LastSupported = 0x1F;
 188         }
 189
 190         dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported,
 191                                         LastSupported);
 192
 193         /*   Save PCI configuration space for all devices in supported slots */
 194         pci_bus->number = busnumber;
 195         for (device = FirstSupported; device <= LastSupported; device++) {
 196                 ID = 0xFFFFFFFF;
 197                 rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0),
 198                                         PCI_VENDOR_ID, &ID);
 199
 200                 if (ID != 0xFFFFFFFF) {   /*  device in slot */
 201                         rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
 202                                         0x0B, &class_code);
 203                         if (rc)
 204                                 return rc;
 205
 206                         rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
 207                                         PCI_HEADER_TYPE, &header_type);
 208                         if (rc)
 209                                 return rc;
 210
 211                         dbg("class_code = %x, header_type = %x\n", class_code, header_type);
 212
 213                         /* If multi-function device, set max_functions to 8 */
 214                         if (header_type & 0x80)
 215                                 max_functions = 8;
 216                         else
 217                                 max_functions = 1;
 218
 219                         function = 0;
 220
 221                         do {
 222                                 DevError = 0;
 223
 224                                 if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {   /* P-P Bridge */
 225                                         /* Recurse the subordinate bus
 226                                          * get the subordinate bus number
 227                                          */
 228                                         rc = pci_bus_read_config_byte(pci_bus,
 229                                                 PCI_DEVFN(device, function),
 230                                                 PCI_SECONDARY_BUS, &secondary_bus);
 231                                         if (rc) {
 232                                                 return rc;
 233                                         } else {
 234                                                 sub_bus = (int) secondary_bus;
 235
 236                                                 /* Save secondary bus cfg spc with this recursive call. */
 237                                                 rc = shpchp_save_config(ctrl, sub_bus, 0, 0);
 238                                                 if (rc)
 239                                                         return rc;
 240                                         }
 241                                 }
 242
 243                                 index = 0;
 244                                 new_slot = shpchp_slot_find(busnumber, device, index++);
 245
 246                                 dbg("new_slot = %p\n", new_slot);
 247
 248                                 while (new_slot && (new_slot->function != (u8) function)) {
 249                                         new_slot = shpchp_slot_find(busnumber, device, index++);
 250                                         dbg("new_slot = %p\n", new_slot);
 251                                 }
 252                                 if (!new_slot) {
 253                                         /* Setup slot structure. */
 254                                         new_slot = shpchp_slot_create(busnumber);
 255                                         dbg("new_slot = %p\n", new_slot);
 256
 257                                         if (new_slot == NULL)
 258                                                 return(1);
 259                                 }
 260
 261                                 new_slot->bus = (u8) busnumber;
 262                                 new_slot->device = (u8) device;
 263                                 new_slot->function = (u8) function;
 264                                 new_slot->is_a_board = 1;
 265                                 new_slot->switch_save = 0x10;
 266                                 new_slot->pwr_save = 1;
 267                                 /* In case of unsupported board */
 268                                 new_slot->status = DevError;
 269                                 new_slot->pci_dev = pci_find_slot(new_slot->bus,
 270                                         (new_slot->device << 3) | new_slot->function);
 271                                 dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev);
 272
 273                                 for (cloop = 0; cloop < 0x20; cloop++) {
 274                                         rc = pci_bus_read_config_dword(pci_bus,
 275                                                 PCI_DEVFN(device, function),
 276                                                 cloop << 2,
 277                                                 (u32 *) &(new_slot->config_space [cloop]));
 278                                         /* dbg("new_slot->config_space[%x] = %x\n",
 279                                                 cloop, new_slot->config_space[cloop]); */
 280                                         if (rc)
 281                                                 return rc;
 282                                 }
 283
 284                                 function++;
 285
 286                                 stop_it = 0;
 287
 288                                 /*  this loop skips to the next present function
 289                                  *  reading in Class Code and Header type.
 290                                  */
 291
 292                                 while ((function < max_functions)&&(!stop_it)) {
 293                                         rc = pci_bus_read_config_dword(pci_bus,
 294                                                 PCI_DEVFN(device, function),
 295                                                 PCI_VENDOR_ID, &ID);
 296
 297                                         if (ID == 0xFFFFFFFF) {  /* nothing there. */
 298                                                 function++;
 299                                                 dbg("Nothing there\n");
 300                                         } else {  /* Something there */
 301                                                 rc = pci_bus_read_config_byte(pci_bus,
 302                                                         PCI_DEVFN(device, function),
 303                                                         0x0B, &class_code);
 304                                                 if (rc)
 305                                                         return rc;
 306
 307                                                 rc = pci_bus_read_config_byte(pci_bus,
 308                                                         PCI_DEVFN(device, function),
 309                                                         PCI_HEADER_TYPE, &header_type);
 310                                                 if (rc)
 311                                                         return rc;
 312
 313                                                 dbg("class_code = %x, header_type = %x\n",
 314                                                         class_code, header_type);
 315                                                 stop_it++;
 316                                         }
 317                                 }
 318
 319                         } while (function < max_functions);
 320                         /* End of IF (device in slot?) */
 321                 } else if (is_hot_plug) {
 322                         /* Setup slot structure with entry for empty slot */
 323                         new_slot = shpchp_slot_create(busnumber);
 324
 325                         if (new_slot == NULL) {
 326                                 return(1);
 327                         }
 328                         dbg("new_slot = %p\n", new_slot);
 329
 330                         new_slot->bus = (u8) busnumber;
 331                         new_slot->device = (u8) device;
 332                         new_slot->function = 0;
 333                         new_slot->is_a_board = 0;
 334                         new_slot->presence_save = 0;
 335                         new_slot->switch_save = 0;
 336                 }
 337         }                       /* End of FOR loop */
 338
 339         return(0);
 340 }
 341
 342
 343 /*
 344  * shpchp_save_slot_config
 345  *
 346  * Saves configuration info for all PCI devices in a given slot
 347  * including subordinate busses.
 348  *
 349  * returns 0 if success
 350  */
 351 int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot)
 352 {
 353         int rc;
 354         u8 class_code;
 355         u8 header_type;
 356         u32 ID;
 357         u8 secondary_bus;
 358         int sub_bus;
 359         int max_functions;
 360         int function;
 361         int cloop = 0;
 362         int stop_it;
 363         struct pci_bus lpci_bus, *pci_bus;
 364         memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
 365         pci_bus = &lpci_bus;
 366         pci_bus->number = new_slot->bus;
 367
 368         ID = 0xFFFFFFFF;
 369
 370         pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0),
 371                                         PCI_VENDOR_ID, &ID);
 372
 373         if (ID != 0xFFFFFFFF) {   /*  device in slot */
 374                 pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
 375                                         0x0B, &class_code);
 376
 377                 pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
 378                                         PCI_HEADER_TYPE, &header_type);
 379
 380                 if (header_type & 0x80) /* Multi-function device */
 381                         max_functions = 8;
 382                 else
 383                         max_functions = 1;
 384
 385                 function = 0;
 386
 387                 do {
 388                         if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {     /* PCI-PCI Bridge */
 389                                 /*  Recurse the subordinate bus */
 390                                 pci_bus_read_config_byte(pci_bus,
 391                                         PCI_DEVFN(new_slot->device, function),
 392                                         PCI_SECONDARY_BUS, &secondary_bus);
 393
 394                                 sub_bus = (int) secondary_bus;
 395
 396                                 /* Save the config headers for the secondary bus. */
 397                                 rc = shpchp_save_config(ctrl, sub_bus, 0, 0);
 398
 399                                 if (rc)
 400                                         return rc;
 401
 402                         }       /* End of IF */
 403
 404                         new_slot->status = 0;
 405
 406                         for (cloop = 0; cloop < 0x20; cloop++) {
 407                                 pci_bus_read_config_dword(pci_bus,
 408                                         PCI_DEVFN(new_slot->device, function),
 409                                         cloop << 2,
 410                                         (u32 *) &(new_slot->config_space [cloop]));
 411                         }
 412
 413                         function++;
 414
 415                         stop_it = 0;
 416
 417                         /*  this loop skips to the next present function
 418                          *  reading in the Class Code and the Header type.
 419                          */
 420
 421                         while ((function < max_functions) && (!stop_it)) {
 422                                 pci_bus_read_config_dword(pci_bus,
 423                                         PCI_DEVFN(new_slot->device, function),
 424                                         PCI_VENDOR_ID, &ID);
 425
 426                                 if (ID == 0xFFFFFFFF) {  /* nothing there. */
 427                                         function++;
 428                                 } else {  /* Something there */
 429                                         pci_bus_read_config_byte(pci_bus,
 430                                                 PCI_DEVFN(new_slot->device, function),
 431                                                 0x0B, &class_code);
 432
 433                                         pci_bus_read_config_byte(pci_bus,
 434                                                 PCI_DEVFN(new_slot->device, function),
 435                                                 PCI_HEADER_TYPE, &header_type);
 436
 437                                         stop_it++;
 438                                 }
 439                         }
 440
 441                 } while (function < max_functions);
 442         }                       /* End of IF (device in slot?) */
 443         else {
 444                 return 2;
 445         }
 446
 447         return 0;
 448 }
 449
 450
 451 /*
 452  * shpchp_save_used_resources
 453  *
 454  * Stores used resource information for existing boards.  this is
 455  * for boards that were in the system when this driver was loaded.
 456  * this function is for hot plug ADD
 457  *
 458  * returns 0 if success
 459  * if disable  == 1(DISABLE_CARD),
 460  *  it loops for all functions of the slot and disables them.
 461  * else, it just get resources of the function and return.
 462  */
 463 int shpchp_save_used_resources(struct controller *ctrl, struct pci_func *func, int disable)
 464 {
 465         u8 cloop;
 466         u8 header_type;
 467         u8 secondary_bus;
 468         u8 temp_byte;
 469         u16 command;
 470         u16 save_command;
 471         u16 w_base, w_length;
 472         u32 temp_register;
 473         u32 save_base;
 474         u32 base, length;
 475         u64 base64 = 0;
 476         int index = 0;
 477         unsigned int devfn;
 478         struct pci_resource *mem_node = NULL;
 479         struct pci_resource *p_mem_node = NULL;
 480         struct pci_resource *t_mem_node;
 481         struct pci_resource *io_node;
 482         struct pci_resource *bus_node;
 483         struct pci_bus lpci_bus, *pci_bus;
 484         memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
 485         pci_bus = &lpci_bus;
 486
 487         if (disable)
 488                 func = shpchp_slot_find(func->bus, func->device, index++);
 489
 490         while ((func != NULL) && func->is_a_board) {
 491                 pci_bus->number = func->bus;
 492                 devfn = PCI_DEVFN(func->device, func->function);
 493
 494                 /* Save the command register */
 495                 pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
 496
 497                 if (disable) {
 498                         /* disable card */
 499                         command = 0x00;
 500                         pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
 501                 }
 502
 503                 /* Check for Bridge */
 504                 pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 505
 506                 if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {     /* PCI-PCI Bridge */
 507                         dbg("Save_used_res of PCI bridge b:d=0x%x:%x, sc=0x%x\n",
 508                                         func->bus, func->device, save_command);
 509                         if (disable) {
 510                                 /* Clear Bridge Control Register */
 511                                 command = 0x00;
 512                                 pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
 513                         }
 514
 515                         pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 516                         pci_bus_read_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, &temp_byte);
 517
 518                         bus_node = kmalloc(sizeof(struct pci_resource),
 519                                                 GFP_KERNEL);
 520                         if (!bus_node)
 521                                 return -ENOMEM;
 522
 523                         bus_node->base = (ulong)secondary_bus;
 524                         bus_node->length = (ulong)(temp_byte - secondary_bus + 1);
 525
 526                         bus_node->next = func->bus_head;
 527                         func->bus_head = bus_node;
 528
 529                         /* Save IO base and Limit registers */
 530                         pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &temp_byte);
 531                         base = temp_byte;
 532                         pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &temp_byte);
 533                         length = temp_byte;
 534
 535                         if ((base <= length) && (!disable || (save_command & PCI_COMMAND_IO))) {
 536                                 io_node = kmalloc(sizeof(struct pci_resource),
 537                                                         GFP_KERNEL);
 538                                 if (!io_node)
 539                                         return -ENOMEM;
 540
 541                                 io_node->base = (ulong)(base & PCI_IO_RANGE_MASK) << 8;
 542                                 io_node->length = (ulong)(length - base + 0x10) << 8;
 543
 544                                 io_node->next = func->io_head;
 545                                 func->io_head = io_node;
 546                         }
 547
 548                         /* Save memory base and Limit registers */
 549                         pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
 550                         pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
 551
 552                         if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) {
 553                                 mem_node = kmalloc(sizeof(struct pci_resource),
 554                                                 GFP_KERNEL);
 555                                 if (!mem_node)
 556                                         return -ENOMEM;
 557
 558                                 mem_node->base = (ulong)w_base << 16;
 559                                 mem_node->length = (ulong)(w_length - w_base + 0x10) << 16;
 560
 561                                 mem_node->next = func->mem_head;
 562                                 func->mem_head = mem_node;
 563                         }
 564                         /* Save prefetchable memory base and Limit registers */
 565                         pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
 566                         pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
 567
 568                         if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) {
 569                                 p_mem_node = kmalloc(sizeof(struct pci_resource),
 570                                                 GFP_KERNEL);
 571                                 if (!p_mem_node)
 572                                         return -ENOMEM;
 573
 574                                 p_mem_node->base = (ulong)w_base << 16;
 575                                 p_mem_node->length = (ulong)(w_length - w_base + 0x10) << 16;
 576
 577                                 p_mem_node->next = func->p_mem_head;
 578                                 func->p_mem_head = p_mem_node;
 579                         }
 580                 } else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
 581                         dbg("Save_used_res of PCI adapter b:d=0x%x:%x, sc=0x%x\n",
 582                                         func->bus, func->device, save_command);
 583
 584                         /* Figure out IO and memory base lengths */
 585                         for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) {
 586                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
 587
 588                                 temp_register = 0xFFFFFFFF;
 589                                 pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
 590                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register);
 591
 592                                 if (!disable)
 593                                         pci_bus_write_config_dword(pci_bus, devfn, cloop, save_base);
 594
 595                                 if (!temp_register)
 596                                         continue;
 597
 598                                 base = temp_register;
 599
 600                                 if ((base & PCI_BASE_ADDRESS_SPACE_IO) &&
 601                                                 (!disable || (save_command & PCI_COMMAND_IO))) {
 602                                         /* IO base */
 603                                         /* set temp_register = amount of IO space requested */
 604                                         base = base & 0xFFFFFFFCL;
 605                                         base = (~base) + 1;
 606
 607                                         io_node =  kmalloc(sizeof (struct pci_resource),
 608                                                                 GFP_KERNEL);
 609                                         if (!io_node)
 610                                                 return -ENOMEM;
 611
 612                                         io_node->base = (ulong)save_base & PCI_BASE_ADDRESS_IO_MASK;
 613                                         io_node->length = (ulong)base;
 614                                         dbg("sur adapter: IO bar=0x%x(length=0x%x)\n",
 615                                                 io_node->base, io_node->length);
 616
 617                                         io_node->next = func->io_head;
 618                                         func->io_head = io_node;
 619                                 } else {  /* map Memory */
 620                                         int prefetchable = 1;
 621                                         /* struct pci_resources **res_node; */
 622                                         char *res_type_str = "PMEM";
 623                                         u32 temp_register2;
 624
 625                                         t_mem_node = kmalloc(sizeof (struct pci_resource),
 626                                                                 GFP_KERNEL);
 627                                         if (!t_mem_node)
 628                                                 return -ENOMEM;
 629
 630                                         if (!(base & PCI_BASE_ADDRESS_MEM_PREFETCH) &&
 631                                                         (!disable || (save_command & PCI_COMMAND_MEMORY))) {
 632                                                 prefetchable = 0;
 633                                                 mem_node = t_mem_node;
 634                                                 res_type_str++;
 635                                         } else
 636                                                 p_mem_node = t_mem_node;
 637
 638                                         base = base & 0xFFFFFFF0L;
 639                                         base = (~base) + 1;
 640
 641                                         switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) {
 642                                         case PCI_BASE_ADDRESS_MEM_TYPE_32:
 643                                                 if (prefetchable) {
 644                                                         p_mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK;
 645                                                         p_mem_node->length = (ulong)base;
 646                                                         dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n",
 647                                                                 res_type_str,
 648                                                                 p_mem_node->base,
 649                                                                 p_mem_node->length);
 650
 651                                                         p_mem_node->next = func->p_mem_head;
 652                                                         func->p_mem_head = p_mem_node;
 653                                                 } else {
 654                                                         mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK;
 655                                                         mem_node->length = (ulong)base;
 656                                                         dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n",
 657                                                                 res_type_str,
 658                                                                 mem_node->base,
 659                                                                 mem_node->length);
 660
 661                                                         mem_node->next = func->mem_head;
 662                                                         func->mem_head = mem_node;
 663                                                 }
 664                                                 break;
 665                                         case PCI_BASE_ADDRESS_MEM_TYPE_64:
 666                                                 pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2);
 667                                                 base64 = temp_register2;
 668                                                 base64 = (base64 << 32) | save_base;
 669
 670                                                 if (temp_register2) {
 671                                                         dbg("sur adapter: 64 %s high dword of base64(0x%x:%x) masked to 0\n",
 672                                                                 res_type_str, temp_register2, (u32)base64);
 673                                                         base64 &= 0x00000000FFFFFFFFL;
 674                                                 }
 675
 676                                                 if (prefetchable) {
 677                                                         p_mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK;
 678                                                         p_mem_node->length = base;
 679                                                         dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n",
 680                                                                 res_type_str,
 681                                                                 p_mem_node->base,
 682                                                                 p_mem_node->length);
 683
 684                                                         p_mem_node->next = func->p_mem_head;
 685                                                         func->p_mem_head = p_mem_node;
 686                                                 } else {
 687                                                         mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK;
 688                                                         mem_node->length = base;
 689                                                         dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n",
 690                                                                 res_type_str,
 691                                                                 mem_node->base,
 692                                                                 mem_node->length);
 693
 694                                                         mem_node->next = func->mem_head;
 695                                                         func->mem_head = mem_node;
 696                                                 }
 697                                                 cloop += 4;
 698                                                 break;
 699                                         default:
 700                                                 dbg("asur: reserved BAR type=0x%x\n",
 701                                                         temp_register);
 702                                                 break;
 703                                         }
 704                                 }
 705                         }       /* End of base register loop */
 706                 } else {        /* Some other unknown header type */
 707                         dbg("Save_used_res of PCI unknown type b:d=0x%x:%x. skip.\n",
 708                                         func->bus, func->device);
 709                 }
 710
 711                 /* find the next device in this slot */
 712                 if (!disable)
 713                         break;
 714                 func = shpchp_slot_find(func->bus, func->device, index++);
 715         }
 716
 717         return 0;
 718 }
 719
 720 /**
 721  * kfree_resource_list: release memory of all list members
 722  * @res: resource list to free
 723  */
 724 static inline void
 725 return_resource_list(struct pci_resource **func, struct pci_resource **res)
 726 {
 727         struct pci_resource *node;
 728         struct pci_resource *t_node;
 729
 730         node = *func;
 731         *func = NULL;
 732         while (node) {
 733                 t_node = node->next;
 734                 return_resource(res, node);
 735                 node = t_node;
 736         }
 737 }
 738
 739 /*
 740  * shpchp_return_board_resources
 741  *
 742  * this routine returns all resources allocated to a board to
 743  * the available pool.
 744  *
 745  * returns 0 if success
 746  */
 747 int shpchp_return_board_resources(struct pci_func * func,
 748                                         struct resource_lists * resources)
 749 {
 750         int rc;
 751         dbg("%s\n", __FUNCTION__);
 752
 753         if (!func)
 754                 return 1;
 755
 756         return_resource_list(&(func->io_head),&(resources->io_head));
 757         return_resource_list(&(func->mem_head),&(resources->mem_head));
 758         return_resource_list(&(func->p_mem_head),&(resources->p_mem_head));
 759         return_resource_list(&(func->bus_head),&(resources->bus_head));
 760
 761         rc = shpchp_resource_sort_and_combine(&(resources->mem_head));
 762         rc |= shpchp_resource_sort_and_combine(&(resources->p_mem_head));
 763         rc |= shpchp_resource_sort_and_combine(&(resources->io_head));
 764         rc |= shpchp_resource_sort_and_combine(&(resources->bus_head));
 765
 766         return rc;
 767 }
 768
 769 /**
 770  * kfree_resource_list: release memory of all list members
 771  * @res: resource list to free
 772  */
 773 static inline void
 774 kfree_resource_list(struct pci_resource **r)
 775 {
 776         struct pci_resource *res, *tres;
 777
 778         res = *r;
 779         *r = NULL;
 780
 781         while (res) {
 782                 tres = res;
 783                 res = res->next;
 784                 kfree(tres);
 785         }
 786 }
 787
 788 /**
 789  * shpchp_destroy_resource_list: put node back in the resource list
 790  * @resources: list to put nodes back
 791  */
 792 void shpchp_destroy_resource_list(struct resource_lists *resources)
 793 {
 794         kfree_resource_list(&(resources->io_head));
 795         kfree_resource_list(&(resources->mem_head));
 796         kfree_resource_list(&(resources->p_mem_head));
 797         kfree_resource_list(&(resources->bus_head));
 798 }
 799
 800 /**
 801  * shpchp_destroy_board_resources: put node back in the resource list
 802  * @resources: list to put nodes back
 803  */
 804 void shpchp_destroy_board_resources(struct pci_func * func)
 805 {
 806         kfree_resource_list(&(func->io_head));
 807         kfree_resource_list(&(func->mem_head));
 808         kfree_resource_list(&(func->p_mem_head));
 809         kfree_resource_list(&(func->bus_head));
 810 }