Merge branch 'acpi_enforce_resources' into release
[linux-2.6] / drivers / acpi / acpica / nspredef.c
1 /******************************************************************************
2  *
3  * Module Name: nspredef - Validation of ACPI predefined methods and objects
4  *              $Revision: 1.1 $
5  *
6  *****************************************************************************/
7
8 /*
9  * Copyright (C) 2000 - 2008, Intel Corp.
10  * All rights reserved.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions, and the following disclaimer,
17  *    without modification.
18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19  *    substantially similar to the "NO WARRANTY" disclaimer below
20  *    ("Disclaimer") and any redistribution must be conditioned upon
21  *    including a substantially similar Disclaimer requirement for further
22  *    binary redistribution.
23  * 3. Neither the names of the above-listed copyright holders nor the names
24  *    of any contributors may be used to endorse or promote products derived
25  *    from this software without specific prior written permission.
26  *
27  * Alternatively, this software may be distributed under the terms of the
28  * GNU General Public License ("GPL") version 2 as published by the Free
29  * Software Foundation.
30  *
31  * NO WARRANTY
32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42  * POSSIBILITY OF SUCH DAMAGES.
43  */
44
45 #include <acpi/acpi.h>
46 #include "accommon.h"
47 #include "acnamesp.h"
48 #include "acpredef.h"
49
50 #define _COMPONENT          ACPI_NAMESPACE
51 ACPI_MODULE_NAME("nspredef")
52
53 /*******************************************************************************
54  *
55  * This module validates predefined ACPI objects that appear in the namespace,
56  * at the time they are evaluated (via acpi_evaluate_object). The purpose of this
57  * validation is to detect problems with BIOS-exposed predefined ACPI objects
58  * before the results are returned to the ACPI-related drivers.
59  *
60  * There are several areas that are validated:
61  *
62  *  1) The number of input arguments as defined by the method/object in the
63  *      ASL is validated against the ACPI specification.
64  *  2) The type of the return object (if any) is validated against the ACPI
65  *      specification.
66  *  3) For returned package objects, the count of package elements is
67  *      validated, as well as the type of each package element. Nested
68  *      packages are supported.
69  *
70  * For any problems found, a warning message is issued.
71  *
72  ******************************************************************************/
73 /* Local prototypes */
74 static acpi_status
75 acpi_ns_check_package(char *pathname,
76                       union acpi_operand_object **return_object_ptr,
77                       const union acpi_predefined_info *predefined);
78
79 static acpi_status
80 acpi_ns_check_package_elements(char *pathname,
81                                union acpi_operand_object **elements,
82                                u8 type1,
83                                u32 count1,
84                                u8 type2, u32 count2, u32 start_index);
85
86 static acpi_status
87 acpi_ns_check_object_type(char *pathname,
88                           union acpi_operand_object **return_object_ptr,
89                           u32 expected_btypes, u32 package_index);
90
91 static acpi_status
92 acpi_ns_check_reference(char *pathname,
93                         union acpi_operand_object *return_object);
94
95 static acpi_status
96 acpi_ns_repair_object(u32 expected_btypes,
97                       u32 package_index,
98                       union acpi_operand_object **return_object_ptr);
99
100 /*
101  * Names for the types that can be returned by the predefined objects.
102  * Used for warning messages. Must be in the same order as the ACPI_RTYPEs
103  */
104 static const char *acpi_rtype_names[] = {
105         "/Integer",
106         "/String",
107         "/Buffer",
108         "/Package",
109         "/Reference",
110 };
111
112 #define ACPI_NOT_PACKAGE    ACPI_UINT32_MAX
113
114 /*******************************************************************************
115  *
116  * FUNCTION:    acpi_ns_check_predefined_names
117  *
118  * PARAMETERS:  Node            - Namespace node for the method/object
119  *              return_object_ptr - Pointer to the object returned from the
120  *                                evaluation of a method or object
121  *
122  * RETURN:      Status
123  *
124  * DESCRIPTION: Check an ACPI name for a match in the predefined name list.
125  *
126  ******************************************************************************/
127
128 acpi_status
129 acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
130                                u32 user_param_count,
131                                acpi_status return_status,
132                                union acpi_operand_object **return_object_ptr)
133 {
134         union acpi_operand_object *return_object = *return_object_ptr;
135         acpi_status status = AE_OK;
136         const union acpi_predefined_info *predefined;
137         char *pathname;
138
139         /* Match the name for this method/object against the predefined list */
140
141         predefined = acpi_ns_check_for_predefined_name(node);
142
143         /* Get the full pathname to the object, for use in error messages */
144
145         pathname = acpi_ns_get_external_pathname(node);
146         if (!pathname) {
147                 pathname = ACPI_CAST_PTR(char, predefined->info.name);
148         }
149
150         /*
151          * Check that the parameter count for this method matches the ASL
152          * definition. For predefined names, ensure that both the caller and
153          * the method itself are in accordance with the ACPI specification.
154          */
155         acpi_ns_check_parameter_count(pathname, node, user_param_count,
156                                       predefined);
157
158         /* If not a predefined name, we cannot validate the return object */
159
160         if (!predefined) {
161                 goto exit;
162         }
163
164         /* If the method failed, we cannot validate the return object */
165
166         if ((return_status != AE_OK) && (return_status != AE_CTRL_RETURN_VALUE)) {
167                 goto exit;
168         }
169
170         /*
171          * Only validate the return value on the first successful evaluation of
172          * the method. This ensures that any warnings will only be emitted during
173          * the very first evaluation of the method/object.
174          */
175         if (node->flags & ANOBJ_EVALUATED) {
176                 goto exit;
177         }
178
179         /* Mark the node as having been successfully evaluated */
180
181         node->flags |= ANOBJ_EVALUATED;
182
183         /*
184          * If there is no return value, check if we require a return value for
185          * this predefined name. Either one return value is expected, or none,
186          * for both methods and other objects.
187          *
188          * Exit now if there is no return object. Warning if one was expected.
189          */
190         if (!return_object) {
191                 if ((predefined->info.expected_btypes) &&
192                     (!(predefined->info.expected_btypes & ACPI_RTYPE_NONE))) {
193                         ACPI_ERROR((AE_INFO,
194                                     "%s: Missing expected return value",
195                                     pathname));
196
197                         status = AE_AML_NO_RETURN_VALUE;
198                 }
199                 goto exit;
200         }
201
202         /*
203          * We have a return value, but if one wasn't expected, just exit, this is
204          * not a problem
205          *
206          * For example, if the "Implicit Return" feature is enabled, methods will
207          * always return a value
208          */
209         if (!predefined->info.expected_btypes) {
210                 goto exit;
211         }
212
213         /*
214          * Check that the type of the return object is what is expected for
215          * this predefined name
216          */
217         status = acpi_ns_check_object_type(pathname, return_object_ptr,
218                                            predefined->info.expected_btypes,
219                                            ACPI_NOT_PACKAGE);
220         if (ACPI_FAILURE(status)) {
221                 goto exit;
222         }
223
224         /* For returned Package objects, check the type of all sub-objects */
225
226         if (return_object->common.type == ACPI_TYPE_PACKAGE) {
227                 status =
228                     acpi_ns_check_package(pathname, return_object_ptr,
229                                           predefined);
230         }
231
232       exit:
233         if (pathname != predefined->info.name) {
234                 ACPI_FREE(pathname);
235         }
236
237         return (status);
238 }
239
240 /*******************************************************************************
241  *
242  * FUNCTION:    acpi_ns_check_parameter_count
243  *
244  * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
245  *              Node            - Namespace node for the method/object
246  *              user_param_count - Number of args passed in by the caller
247  *              Predefined      - Pointer to entry in predefined name table
248  *
249  * RETURN:      None
250  *
251  * DESCRIPTION: Check that the declared (in ASL/AML) parameter count for a
252  *              predefined name is what is expected (i.e., what is defined in
253  *              the ACPI specification for this predefined name.)
254  *
255  ******************************************************************************/
256
257 void
258 acpi_ns_check_parameter_count(char *pathname,
259                               struct acpi_namespace_node *node,
260                               u32 user_param_count,
261                               const union acpi_predefined_info *predefined)
262 {
263         u32 param_count;
264         u32 required_params_current;
265         u32 required_params_old;
266
267         /* Methods have 0-7 parameters. All other types have zero. */
268
269         param_count = 0;
270         if (node->type == ACPI_TYPE_METHOD) {
271                 param_count = node->object->method.param_count;
272         }
273
274         /* Argument count check for non-predefined methods/objects */
275
276         if (!predefined) {
277                 /*
278                  * Warning if too few or too many arguments have been passed by the
279                  * caller. An incorrect number of arguments may not cause the method
280                  * to fail. However, the method will fail if there are too few
281                  * arguments and the method attempts to use one of the missing ones.
282                  */
283                 if (user_param_count < param_count) {
284                         ACPI_WARNING((AE_INFO,
285                                       "%s: Insufficient arguments - needs %d, found %d",
286                                       pathname, param_count, user_param_count));
287                 } else if (user_param_count > param_count) {
288                         ACPI_WARNING((AE_INFO,
289                                       "%s: Excess arguments - needs %d, found %d",
290                                       pathname, param_count, user_param_count));
291                 }
292                 return;
293         }
294
295         /* Allow two different legal argument counts (_SCP, etc.) */
296
297         required_params_current = predefined->info.param_count & 0x0F;
298         required_params_old = predefined->info.param_count >> 4;
299
300         if (user_param_count != ACPI_UINT32_MAX) {
301
302                 /* Validate the user-supplied parameter count */
303
304                 if ((user_param_count != required_params_current) &&
305                     (user_param_count != required_params_old)) {
306                         ACPI_WARNING((AE_INFO,
307                                       "%s: Parameter count mismatch - "
308                                       "caller passed %d, ACPI requires %d",
309                                       pathname, user_param_count,
310                                       required_params_current));
311                 }
312         }
313
314         /*
315          * Only validate the argument count on the first successful evaluation of
316          * the method. This ensures that any warnings will only be emitted during
317          * the very first evaluation of the method/object.
318          */
319         if (node->flags & ANOBJ_EVALUATED) {
320                 return;
321         }
322
323         /*
324          * Check that the ASL-defined parameter count is what is expected for
325          * this predefined name.
326          */
327         if ((param_count != required_params_current) &&
328             (param_count != required_params_old)) {
329                 ACPI_WARNING((AE_INFO,
330                               "%s: Parameter count mismatch - ASL declared %d, ACPI requires %d",
331                               pathname, param_count, required_params_current));
332         }
333 }
334
335 /*******************************************************************************
336  *
337  * FUNCTION:    acpi_ns_check_for_predefined_name
338  *
339  * PARAMETERS:  Node            - Namespace node for the method/object
340  *
341  * RETURN:      Pointer to entry in predefined table. NULL indicates not found.
342  *
343  * DESCRIPTION: Check an object name against the predefined object list.
344  *
345  ******************************************************************************/
346
347 const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct
348                                                                     acpi_namespace_node
349                                                                     *node)
350 {
351         const union acpi_predefined_info *this_name;
352
353         /* Quick check for a predefined name, first character must be underscore */
354
355         if (node->name.ascii[0] != '_') {
356                 return (NULL);
357         }
358
359         /* Search info table for a predefined method/object name */
360
361         this_name = predefined_names;
362         while (this_name->info.name[0]) {
363                 if (ACPI_COMPARE_NAME(node->name.ascii, this_name->info.name)) {
364
365                         /* Return pointer to this table entry */
366
367                         return (this_name);
368                 }
369
370                 /*
371                  * Skip next entry in the table if this name returns a Package
372                  * (next entry contains the package info)
373                  */
374                 if (this_name->info.expected_btypes & ACPI_RTYPE_PACKAGE) {
375                         this_name++;
376                 }
377
378                 this_name++;
379         }
380
381         return (NULL);
382 }
383
384 /*******************************************************************************
385  *
386  * FUNCTION:    acpi_ns_check_package
387  *
388  * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
389  *              return_object_ptr - Pointer to the object returned from the
390  *                                evaluation of a method or object
391  *              Predefined      - Pointer to entry in predefined name table
392  *
393  * RETURN:      Status
394  *
395  * DESCRIPTION: Check a returned package object for the correct count and
396  *              correct type of all sub-objects.
397  *
398  ******************************************************************************/
399
400 static acpi_status
401 acpi_ns_check_package(char *pathname,
402                       union acpi_operand_object **return_object_ptr,
403                       const union acpi_predefined_info *predefined)
404 {
405         union acpi_operand_object *return_object = *return_object_ptr;
406         const union acpi_predefined_info *package;
407         union acpi_operand_object *sub_package;
408         union acpi_operand_object **elements;
409         union acpi_operand_object **sub_elements;
410         acpi_status status;
411         u32 expected_count;
412         u32 count;
413         u32 i;
414         u32 j;
415
416         ACPI_FUNCTION_NAME(ns_check_package);
417
418         /* The package info for this name is in the next table entry */
419
420         package = predefined + 1;
421
422         ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
423                           "%s Validating return Package of Type %X, Count %X\n",
424                           pathname, package->ret_info.type,
425                           return_object->package.count));
426
427         /* Extract package count and elements array */
428
429         elements = return_object->package.elements;
430         count = return_object->package.count;
431
432         /* The package must have at least one element, else invalid */
433
434         if (!count) {
435                 ACPI_WARNING((AE_INFO,
436                               "%s: Return Package has no elements (empty)",
437                               pathname));
438
439                 return (AE_AML_OPERAND_VALUE);
440         }
441
442         /*
443          * Decode the type of the expected package contents
444          *
445          * PTYPE1 packages contain no subpackages
446          * PTYPE2 packages contain sub-packages
447          */
448         switch (package->ret_info.type) {
449         case ACPI_PTYPE1_FIXED:
450
451                 /*
452                  * The package count is fixed and there are no sub-packages
453                  *
454                  * If package is too small, exit.
455                  * If package is larger than expected, issue warning but continue
456                  */
457                 expected_count =
458                     package->ret_info.count1 + package->ret_info.count2;
459                 if (count < expected_count) {
460                         goto package_too_small;
461                 } else if (count > expected_count) {
462                         ACPI_WARNING((AE_INFO,
463                                       "%s: Return Package is larger than needed - "
464                                       "found %u, expected %u", pathname, count,
465                                       expected_count));
466                 }
467
468                 /* Validate all elements of the returned package */
469
470                 status = acpi_ns_check_package_elements(pathname, elements,
471                                                         package->ret_info.
472                                                         object_type1,
473                                                         package->ret_info.
474                                                         count1,
475                                                         package->ret_info.
476                                                         object_type2,
477                                                         package->ret_info.
478                                                         count2, 0);
479                 if (ACPI_FAILURE(status)) {
480                         return (status);
481                 }
482                 break;
483
484         case ACPI_PTYPE1_VAR:
485
486                 /*
487                  * The package count is variable, there are no sub-packages, and all
488                  * elements must be of the same type
489                  */
490                 for (i = 0; i < count; i++) {
491                         status = acpi_ns_check_object_type(pathname, elements,
492                                                            package->ret_info.
493                                                            object_type1, i);
494                         if (ACPI_FAILURE(status)) {
495                                 return (status);
496                         }
497                         elements++;
498                 }
499                 break;
500
501         case ACPI_PTYPE1_OPTION:
502
503                 /*
504                  * The package count is variable, there are no sub-packages. There are
505                  * a fixed number of required elements, and a variable number of
506                  * optional elements.
507                  *
508                  * Check if package is at least as large as the minimum required
509                  */
510                 expected_count = package->ret_info3.count;
511                 if (count < expected_count) {
512                         goto package_too_small;
513                 }
514
515                 /* Variable number of sub-objects */
516
517                 for (i = 0; i < count; i++) {
518                         if (i < package->ret_info3.count) {
519
520                                 /* These are the required package elements (0, 1, or 2) */
521
522                                 status =
523                                     acpi_ns_check_object_type(pathname,
524                                                               elements,
525                                                               package->
526                                                               ret_info3.
527                                                               object_type[i],
528                                                               i);
529                                 if (ACPI_FAILURE(status)) {
530                                         return (status);
531                                 }
532                         } else {
533                                 /* These are the optional package elements */
534
535                                 status =
536                                     acpi_ns_check_object_type(pathname,
537                                                               elements,
538                                                               package->
539                                                               ret_info3.
540                                                               tail_object_type,
541                                                               i);
542                                 if (ACPI_FAILURE(status)) {
543                                         return (status);
544                                 }
545                         }
546                         elements++;
547                 }
548                 break;
549
550         case ACPI_PTYPE2_PKG_COUNT:
551
552                 /* First element is the (Integer) count of sub-packages to follow */
553
554                 status = acpi_ns_check_object_type(pathname, elements,
555                                                    ACPI_RTYPE_INTEGER, 0);
556                 if (ACPI_FAILURE(status)) {
557                         return (status);
558                 }
559
560                 /*
561                  * Count cannot be larger than the parent package length, but allow it
562                  * to be smaller. The >= accounts for the Integer above.
563                  */
564                 expected_count = (u32) (*elements)->integer.value;
565                 if (expected_count >= count) {
566                         goto package_too_small;
567                 }
568
569                 count = expected_count;
570                 elements++;
571
572                 /* Now we can walk the sub-packages */
573
574                 /*lint -fallthrough */
575
576         case ACPI_PTYPE2:
577         case ACPI_PTYPE2_FIXED:
578         case ACPI_PTYPE2_MIN:
579         case ACPI_PTYPE2_COUNT:
580
581                 /*
582                  * These types all return a single package that consists of a variable
583                  * number of sub-packages
584                  */
585                 for (i = 0; i < count; i++) {
586                         sub_package = *elements;
587                         sub_elements = sub_package->package.elements;
588
589                         /* Each sub-object must be of type Package */
590
591                         status =
592                             acpi_ns_check_object_type(pathname, &sub_package,
593                                                       ACPI_RTYPE_PACKAGE, i);
594                         if (ACPI_FAILURE(status)) {
595                                 return (status);
596                         }
597
598                         /* Examine the different types of sub-packages */
599
600                         switch (package->ret_info.type) {
601                         case ACPI_PTYPE2:
602                         case ACPI_PTYPE2_PKG_COUNT:
603
604                                 /* Each subpackage has a fixed number of elements */
605
606                                 expected_count =
607                                     package->ret_info.count1 +
608                                     package->ret_info.count2;
609                                 if (sub_package->package.count !=
610                                     expected_count) {
611                                         count = sub_package->package.count;
612                                         goto package_too_small;
613                                 }
614
615                                 status =
616                                     acpi_ns_check_package_elements(pathname,
617                                                                    sub_elements,
618                                                                    package->
619                                                                    ret_info.
620                                                                    object_type1,
621                                                                    package->
622                                                                    ret_info.
623                                                                    count1,
624                                                                    package->
625                                                                    ret_info.
626                                                                    object_type2,
627                                                                    package->
628                                                                    ret_info.
629                                                                    count2, 0);
630                                 if (ACPI_FAILURE(status)) {
631                                         return (status);
632                                 }
633                                 break;
634
635                         case ACPI_PTYPE2_FIXED:
636
637                                 /* Each sub-package has a fixed length */
638
639                                 expected_count = package->ret_info2.count;
640                                 if (sub_package->package.count < expected_count) {
641                                         count = sub_package->package.count;
642                                         goto package_too_small;
643                                 }
644
645                                 /* Check the type of each sub-package element */
646
647                                 for (j = 0; j < expected_count; j++) {
648                                         status =
649                                             acpi_ns_check_object_type(pathname,
650                                                 &sub_elements[j],
651                                                 package->ret_info2.object_type[j], j);
652                                         if (ACPI_FAILURE(status)) {
653                                                 return (status);
654                                         }
655                                 }
656                                 break;
657
658                         case ACPI_PTYPE2_MIN:
659
660                                 /* Each sub-package has a variable but minimum length */
661
662                                 expected_count = package->ret_info.count1;
663                                 if (sub_package->package.count < expected_count) {
664                                         count = sub_package->package.count;
665                                         goto package_too_small;
666                                 }
667
668                                 /* Check the type of each sub-package element */
669
670                                 status =
671                                     acpi_ns_check_package_elements(pathname,
672                                                                    sub_elements,
673                                                                    package->
674                                                                    ret_info.
675                                                                    object_type1,
676                                                                    sub_package->
677                                                                    package.
678                                                                    count, 0, 0,
679                                                                    0);
680                                 if (ACPI_FAILURE(status)) {
681                                         return (status);
682                                 }
683                                 break;
684
685                         case ACPI_PTYPE2_COUNT:
686
687                                 /* First element is the (Integer) count of elements to follow */
688
689                                 status =
690                                     acpi_ns_check_object_type(pathname,
691                                                               sub_elements,
692                                                               ACPI_RTYPE_INTEGER,
693                                                               0);
694                                 if (ACPI_FAILURE(status)) {
695                                         return (status);
696                                 }
697
698                                 /* Make sure package is large enough for the Count */
699
700                                 expected_count =
701                                     (u32) (*sub_elements)->integer.value;
702                                 if (sub_package->package.count < expected_count) {
703                                         count = sub_package->package.count;
704                                         goto package_too_small;
705                                 }
706
707                                 /* Check the type of each sub-package element */
708
709                                 status =
710                                     acpi_ns_check_package_elements(pathname,
711                                                                    (sub_elements
712                                                                     + 1),
713                                                                    package->
714                                                                    ret_info.
715                                                                    object_type1,
716                                                                    (expected_count
717                                                                     - 1), 0, 0,
718                                                                    1);
719                                 if (ACPI_FAILURE(status)) {
720                                         return (status);
721                                 }
722                                 break;
723
724                         default:
725                                 break;
726                         }
727
728                         elements++;
729                 }
730                 break;
731
732         default:
733
734                 /* Should not get here if predefined info table is correct */
735
736                 ACPI_WARNING((AE_INFO,
737                               "%s: Invalid internal return type in table entry: %X",
738                               pathname, package->ret_info.type));
739
740                 return (AE_AML_INTERNAL);
741         }
742
743         return (AE_OK);
744
745       package_too_small:
746
747         /* Error exit for the case with an incorrect package count */
748
749         ACPI_WARNING((AE_INFO, "%s: Return Package is too small - "
750                       "found %u, expected %u", pathname, count,
751                       expected_count));
752
753         return (AE_AML_OPERAND_VALUE);
754 }
755
756 /*******************************************************************************
757  *
758  * FUNCTION:    acpi_ns_check_package_elements
759  *
760  * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
761  *              Elements        - Pointer to the package elements array
762  *              Type1           - Object type for first group
763  *              Count1          - Count for first group
764  *              Type2           - Object type for second group
765  *              Count2          - Count for second group
766  *              start_index     - Start of the first group of elements
767  *
768  * RETURN:      Status
769  *
770  * DESCRIPTION: Check that all elements of a package are of the correct object
771  *              type. Supports up to two groups of different object types.
772  *
773  ******************************************************************************/
774
775 static acpi_status
776 acpi_ns_check_package_elements(char *pathname,
777                                union acpi_operand_object **elements,
778                                u8 type1,
779                                u32 count1,
780                                u8 type2, u32 count2, u32 start_index)
781 {
782         union acpi_operand_object **this_element = elements;
783         acpi_status status;
784         u32 i;
785
786         /*
787          * Up to two groups of package elements are supported by the data
788          * structure. All elements in each group must be of the same type.
789          * The second group can have a count of zero.
790          */
791         for (i = 0; i < count1; i++) {
792                 status = acpi_ns_check_object_type(pathname, this_element,
793                                                    type1, i + start_index);
794                 if (ACPI_FAILURE(status)) {
795                         return (status);
796                 }
797                 this_element++;
798         }
799
800         for (i = 0; i < count2; i++) {
801                 status = acpi_ns_check_object_type(pathname, this_element,
802                                                    type2,
803                                                    (i + count1 + start_index));
804                 if (ACPI_FAILURE(status)) {
805                         return (status);
806                 }
807                 this_element++;
808         }
809
810         return (AE_OK);
811 }
812
813 /*******************************************************************************
814  *
815  * FUNCTION:    acpi_ns_check_object_type
816  *
817  * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
818  *              return_object_ptr - Pointer to the object returned from the
819  *                                evaluation of a method or object
820  *              expected_btypes - Bitmap of expected return type(s)
821  *              package_index   - Index of object within parent package (if
822  *                                applicable - ACPI_NOT_PACKAGE otherwise)
823  *
824  * RETURN:      Status
825  *
826  * DESCRIPTION: Check the type of the return object against the expected object
827  *              type(s). Use of Btype allows multiple expected object types.
828  *
829  ******************************************************************************/
830
831 static acpi_status
832 acpi_ns_check_object_type(char *pathname,
833                           union acpi_operand_object **return_object_ptr,
834                           u32 expected_btypes, u32 package_index)
835 {
836         union acpi_operand_object *return_object = *return_object_ptr;
837         acpi_status status = AE_OK;
838         u32 return_btype;
839         char type_buffer[48];   /* Room for 5 types */
840         u32 this_rtype;
841         u32 i;
842         u32 j;
843
844         /*
845          * If we get a NULL return_object here, it is a NULL package element,
846          * and this is always an error.
847          */
848         if (!return_object) {
849                 goto type_error_exit;
850         }
851
852         /* A Namespace node should not get here, but make sure */
853
854         if (ACPI_GET_DESCRIPTOR_TYPE(return_object) == ACPI_DESC_TYPE_NAMED) {
855                 ACPI_WARNING((AE_INFO,
856                               "%s: Invalid return type - Found a Namespace node [%4.4s] type %s",
857                               pathname, return_object->node.name.ascii,
858                               acpi_ut_get_type_name(return_object->node.type)));
859                 return (AE_AML_OPERAND_TYPE);
860         }
861
862         /*
863          * Convert the object type (ACPI_TYPE_xxx) to a bitmapped object type.
864          * The bitmapped type allows multiple possible return types.
865          *
866          * Note, the cases below must handle all of the possible types returned
867          * from all of the predefined names (including elements of returned
868          * packages)
869          */
870         switch (return_object->common.type) {
871         case ACPI_TYPE_INTEGER:
872                 return_btype = ACPI_RTYPE_INTEGER;
873                 break;
874
875         case ACPI_TYPE_BUFFER:
876                 return_btype = ACPI_RTYPE_BUFFER;
877                 break;
878
879         case ACPI_TYPE_STRING:
880                 return_btype = ACPI_RTYPE_STRING;
881                 break;
882
883         case ACPI_TYPE_PACKAGE:
884                 return_btype = ACPI_RTYPE_PACKAGE;
885                 break;
886
887         case ACPI_TYPE_LOCAL_REFERENCE:
888                 return_btype = ACPI_RTYPE_REFERENCE;
889                 break;
890
891         default:
892                 /* Not one of the supported objects, must be incorrect */
893
894                 goto type_error_exit;
895         }
896
897         /* Is the object one of the expected types? */
898
899         if (!(return_btype & expected_btypes)) {
900
901                 /* Type mismatch -- attempt repair of the returned object */
902
903                 status = acpi_ns_repair_object(expected_btypes, package_index,
904                                                return_object_ptr);
905                 if (ACPI_SUCCESS(status)) {
906                         return (status);
907                 }
908                 goto type_error_exit;
909         }
910
911         /* For reference objects, check that the reference type is correct */
912
913         if (return_object->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
914                 status = acpi_ns_check_reference(pathname, return_object);
915         }
916
917         return (status);
918
919       type_error_exit:
920
921         /* Create a string with all expected types for this predefined object */
922
923         j = 1;
924         type_buffer[0] = 0;
925         this_rtype = ACPI_RTYPE_INTEGER;
926
927         for (i = 0; i < ACPI_NUM_RTYPES; i++) {
928
929                 /* If one of the expected types, concatenate the name of this type */
930
931                 if (expected_btypes & this_rtype) {
932                         ACPI_STRCAT(type_buffer, &acpi_rtype_names[i][j]);
933                         j = 0;  /* Use name separator from now on */
934                 }
935                 this_rtype <<= 1;       /* Next Rtype */
936         }
937
938         if (package_index == ACPI_NOT_PACKAGE) {
939                 ACPI_WARNING((AE_INFO,
940                               "%s: Return type mismatch - found %s, expected %s",
941                               pathname,
942                               acpi_ut_get_object_type_name(return_object),
943                               type_buffer));
944         } else {
945                 ACPI_WARNING((AE_INFO,
946                               "%s: Return Package type mismatch at index %u - "
947                               "found %s, expected %s", pathname, package_index,
948                               acpi_ut_get_object_type_name(return_object),
949                               type_buffer));
950         }
951
952         return (AE_AML_OPERAND_TYPE);
953 }
954
955 /*******************************************************************************
956  *
957  * FUNCTION:    acpi_ns_check_reference
958  *
959  * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
960  *              return_object   - Object returned from the evaluation of a
961  *                                method or object
962  *
963  * RETURN:      Status
964  *
965  * DESCRIPTION: Check a returned reference object for the correct reference
966  *              type. The only reference type that can be returned from a
967  *              predefined method is a named reference. All others are invalid.
968  *
969  ******************************************************************************/
970
971 static acpi_status
972 acpi_ns_check_reference(char *pathname,
973                         union acpi_operand_object *return_object)
974 {
975
976         /*
977          * Check the reference object for the correct reference type (opcode).
978          * The only type of reference that can be converted to an union acpi_object is
979          * a reference to a named object (reference class: NAME)
980          */
981         if (return_object->reference.class == ACPI_REFCLASS_NAME) {
982                 return (AE_OK);
983         }
984
985         ACPI_WARNING((AE_INFO,
986                       "%s: Return type mismatch - "
987                       "unexpected reference object type [%s] %2.2X",
988                       pathname, acpi_ut_get_reference_name(return_object),
989                       return_object->reference.class));
990
991         return (AE_AML_OPERAND_TYPE);
992 }
993
994 /*******************************************************************************
995  *
996  * FUNCTION:    acpi_ns_repair_object
997  *
998  * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
999  *              package_index   - Used to determine if target is in a package
1000  *              return_object_ptr - Pointer to the object returned from the
1001  *                                evaluation of a method or object
1002  *
1003  * RETURN:      Status. AE_OK if repair was successful.
1004  *
1005  * DESCRIPTION: Attempt to repair/convert a return object of a type that was
1006  *              not expected.
1007  *
1008  ******************************************************************************/
1009
1010 static acpi_status
1011 acpi_ns_repair_object(u32 expected_btypes,
1012                       u32 package_index,
1013                       union acpi_operand_object **return_object_ptr)
1014 {
1015         union acpi_operand_object *return_object = *return_object_ptr;
1016         union acpi_operand_object *new_object;
1017         acpi_size length;
1018
1019         switch (return_object->common.type) {
1020         case ACPI_TYPE_BUFFER:
1021
1022                 if (!(expected_btypes & ACPI_RTYPE_STRING)) {
1023                         return (AE_AML_OPERAND_TYPE);
1024                 }
1025
1026                 /*
1027                  * Have a Buffer, expected a String, convert. Use a to_string
1028                  * conversion, no transform performed on the buffer data. The best
1029                  * example of this is the _BIF method, where the string data from
1030                  * the battery is often (incorrectly) returned as buffer object(s).
1031                  */
1032                 length = 0;
1033                 while ((length < return_object->buffer.length) &&
1034                        (return_object->buffer.pointer[length])) {
1035                         length++;
1036                 }
1037
1038                 /* Allocate a new string object */
1039
1040                 new_object = acpi_ut_create_string_object(length);
1041                 if (!new_object) {
1042                         return (AE_NO_MEMORY);
1043                 }
1044
1045                 /*
1046                  * Copy the raw buffer data with no transform. String is already NULL
1047                  * terminated at Length+1.
1048                  */
1049                 ACPI_MEMCPY(new_object->string.pointer,
1050                             return_object->buffer.pointer, length);
1051
1052                 /* Install the new return object */
1053
1054                 acpi_ut_remove_reference(return_object);
1055                 *return_object_ptr = new_object;
1056
1057                 /*
1058                  * If the object is a package element, we need to:
1059                  * 1. Decrement the reference count of the orignal object, it was
1060                  *    incremented when building the package
1061                  * 2. Increment the reference count of the new object, it will be
1062                  *    decremented when releasing the package
1063                  */
1064                 if (package_index != ACPI_NOT_PACKAGE) {
1065                         acpi_ut_remove_reference(return_object);
1066                         acpi_ut_add_reference(new_object);
1067                 }
1068                 return (AE_OK);
1069
1070         default:
1071                 break;
1072         }
1073
1074         return (AE_AML_OPERAND_TYPE);
1075 }