Merge branch 'master' into upstream
[linux-2.6] / arch / arm / mach-pxa / lpd270.c
1 /*
2  * linux/arch/arm/mach-pxa/lpd270.c
3  *
4  * Support for the LogicPD PXA270 Card Engine.
5  * Derived from the mainstone code, which carries these notices:
6  *
7  * Author:      Nicolas Pitre
8  * Created:     Nov 05, 2002
9  * Copyright:   MontaVista Software Inc.
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License version 2 as
13  * published by the Free Software Foundation.
14  */
15
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/interrupt.h>
20 #include <linux/sched.h>
21 #include <linux/bitops.h>
22 #include <linux/fb.h>
23 #include <linux/ioport.h>
24 #include <linux/mtd/mtd.h>
25 #include <linux/mtd/partitions.h>
26
27 #include <asm/types.h>
28 #include <asm/setup.h>
29 #include <asm/memory.h>
30 #include <asm/mach-types.h>
31 #include <asm/hardware.h>
32 #include <asm/irq.h>
33 #include <asm/sizes.h>
34
35 #include <asm/mach/arch.h>
36 #include <asm/mach/map.h>
37 #include <asm/mach/irq.h>
38 #include <asm/mach/flash.h>
39
40 #include <asm/arch/pxa-regs.h>
41 #include <asm/arch/lpd270.h>
42 #include <asm/arch/audio.h>
43 #include <asm/arch/pxafb.h>
44 #include <asm/arch/mmc.h>
45 #include <asm/arch/irda.h>
46 #include <asm/arch/ohci.h>
47
48 #include "generic.h"
49
50
51 static unsigned int lpd270_irq_enabled;
52
53 static void lpd270_mask_irq(unsigned int irq)
54 {
55         int lpd270_irq = irq - LPD270_IRQ(0);
56
57         __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
58
59         lpd270_irq_enabled &= ~(1 << lpd270_irq);
60         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
61 }
62
63 static void lpd270_unmask_irq(unsigned int irq)
64 {
65         int lpd270_irq = irq - LPD270_IRQ(0);
66
67         lpd270_irq_enabled |= 1 << lpd270_irq;
68         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
69 }
70
71 static struct irq_chip lpd270_irq_chip = {
72         .name           = "CPLD",
73         .ack            = lpd270_mask_irq,
74         .mask           = lpd270_mask_irq,
75         .unmask         = lpd270_unmask_irq,
76 };
77
78 static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc,
79                                   struct pt_regs *regs)
80 {
81         unsigned long pending;
82
83         pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
84         do {
85                 GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
86                 if (likely(pending)) {
87                         irq = LPD270_IRQ(0) + __ffs(pending);
88                         desc = irq_desc + irq;
89                         desc_handle_irq(irq, desc, regs);
90
91                         pending = __raw_readw(LPD270_INT_STATUS) &
92                                                 lpd270_irq_enabled;
93                 }
94         } while (pending);
95 }
96
97 static void __init lpd270_init_irq(void)
98 {
99         int irq;
100
101         pxa_init_irq();
102
103         __raw_writew(0, LPD270_INT_MASK);
104         __raw_writew(0, LPD270_INT_STATUS);
105
106         /* setup extra LogicPD PXA270 irqs */
107         for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
108                 set_irq_chip(irq, &lpd270_irq_chip);
109                 set_irq_handler(irq, do_level_IRQ);
110                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
111         }
112         set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
113         set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
114 }
115
116
117 #ifdef CONFIG_PM
118 static int lpd270_irq_resume(struct sys_device *dev)
119 {
120         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
121         return 0;
122 }
123
124 static struct sysdev_class lpd270_irq_sysclass = {
125         set_kset_name("cpld_irq"),
126         .resume = lpd270_irq_resume,
127 };
128
129 static struct sys_device lpd270_irq_device = {
130         .cls = &lpd270_irq_sysclass,
131 };
132
133 static int __init lpd270_irq_device_init(void)
134 {
135         int ret = sysdev_class_register(&lpd270_irq_sysclass);
136         if (ret == 0)
137                 ret = sysdev_register(&lpd270_irq_device);
138         return ret;
139 }
140
141 device_initcall(lpd270_irq_device_init);
142 #endif
143
144
145 static struct resource smc91x_resources[] = {
146         [0] = {
147                 .start  = LPD270_ETH_PHYS,
148                 .end    = (LPD270_ETH_PHYS + 0xfffff),
149                 .flags  = IORESOURCE_MEM,
150         },
151         [1] = {
152                 .start  = LPD270_ETHERNET_IRQ,
153                 .end    = LPD270_ETHERNET_IRQ,
154                 .flags  = IORESOURCE_IRQ,
155         },
156 };
157
158 static struct platform_device smc91x_device = {
159         .name           = "smc91x",
160         .id             = 0,
161         .num_resources  = ARRAY_SIZE(smc91x_resources),
162         .resource       = smc91x_resources,
163 };
164
165 static struct platform_device lpd270_audio_device = {
166         .name           = "pxa2xx-ac97",
167         .id             = -1,
168 };
169
170 static struct resource lpd270_flash_resources[] = {
171         [0] = {
172                 .start  = PXA_CS0_PHYS,
173                 .end    = PXA_CS0_PHYS + SZ_64M - 1,
174                 .flags  = IORESOURCE_MEM,
175         },
176         [1] = {
177                 .start  = PXA_CS1_PHYS,
178                 .end    = PXA_CS1_PHYS + SZ_64M - 1,
179                 .flags  = IORESOURCE_MEM,
180         },
181 };
182
183 static struct mtd_partition lpd270_flash0_partitions[] = {
184         {
185                 .name =         "Bootloader",
186                 .size =         0x00040000,
187                 .offset =       0,
188                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
189         }, {
190                 .name =         "Kernel",
191                 .size =         0x00400000,
192                 .offset =       0x00040000,
193         }, {
194                 .name =         "Filesystem",
195                 .size =         MTDPART_SIZ_FULL,
196                 .offset =       0x00440000
197         },
198 };
199
200 static struct flash_platform_data lpd270_flash_data[2] = {
201         {
202                 .name           = "processor-flash",
203                 .map_name       = "cfi_probe",
204                 .parts          = lpd270_flash0_partitions,
205                 .nr_parts       = ARRAY_SIZE(lpd270_flash0_partitions),
206         }, {
207                 .name           = "mainboard-flash",
208                 .map_name       = "cfi_probe",
209                 .parts          = NULL,
210                 .nr_parts       = 0,
211         }
212 };
213
214 static struct platform_device lpd270_flash_device[2] = {
215         {
216                 .name           = "pxa2xx-flash",
217                 .id             = 0,
218                 .dev = {
219                         .platform_data  = &lpd270_flash_data[0],
220                 },
221                 .resource       = &lpd270_flash_resources[0],
222                 .num_resources  = 1,
223         }, {
224                 .name           = "pxa2xx-flash",
225                 .id             = 1,
226                 .dev = {
227                         .platform_data  = &lpd270_flash_data[1],
228                 },
229                 .resource       = &lpd270_flash_resources[1],
230                 .num_resources  = 1,
231         },
232 };
233
234 static void lpd270_backlight_power(int on)
235 {
236         if (on) {
237                 pxa_gpio_mode(GPIO16_PWM0_MD);
238                 pxa_set_cken(CKEN0_PWM0, 1);
239                 PWM_CTRL0 = 0;
240                 PWM_PWDUTY0 = 0x3ff;
241                 PWM_PERVAL0 = 0x3ff;
242         } else {
243                 PWM_CTRL0 = 0;
244                 PWM_PWDUTY0 = 0x0;
245                 PWM_PERVAL0 = 0x3FF;
246                 pxa_set_cken(CKEN0_PWM0, 0);
247         }
248 }
249
250 /* 5.7" TFT QVGA (LoLo display number 1) */
251 static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
252         .pixclock               = 150000,
253         .xres                   = 320,
254         .yres                   = 240,
255         .bpp                    = 16,
256         .hsync_len              = 0x14,
257         .left_margin            = 0x28,
258         .right_margin           = 0x0a,
259         .vsync_len              = 0x02,
260         .upper_margin           = 0x08,
261         .lower_margin           = 0x14,
262         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
263         .lccr0                  = 0x07800080,
264         .lccr3                  = 0x00400000,
265         .pxafb_backlight_power  = lpd270_backlight_power,
266 };
267
268 /* 12.1" TFT SVGA (LoLo display number 2) */
269 static struct pxafb_mach_info sharp_lq121s1dg31 __initdata = {
270         .pixclock               = 50000,
271         .xres                   = 800,
272         .yres                   = 600,
273         .bpp                    = 16,
274         .hsync_len              = 0x05,
275         .left_margin            = 0x52,
276         .right_margin           = 0x05,
277         .vsync_len              = 0x04,
278         .upper_margin           = 0x14,
279         .lower_margin           = 0x0a,
280         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
281         .lccr0                  = 0x07800080,
282         .lccr3                  = 0x00400000,
283         .pxafb_backlight_power  = lpd270_backlight_power,
284 };
285
286 /* 3.6" TFT QVGA (LoLo display number 3) */
287 static struct pxafb_mach_info sharp_lq036q1da01 __initdata = {
288         .pixclock               = 150000,
289         .xres                   = 320,
290         .yres                   = 240,
291         .bpp                    = 16,
292         .hsync_len              = 0x0e,
293         .left_margin            = 0x04,
294         .right_margin           = 0x0a,
295         .vsync_len              = 0x03,
296         .upper_margin           = 0x03,
297         .lower_margin           = 0x03,
298         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
299         .lccr0                  = 0x07800080,
300         .lccr3                  = 0x00400000,
301         .pxafb_backlight_power  = lpd270_backlight_power,
302 };
303
304 /* 6.4" TFT VGA (LoLo display number 5) */
305 static struct pxafb_mach_info sharp_lq64d343 __initdata = {
306         .pixclock               = 25000,
307         .xres                   = 640,
308         .yres                   = 480,
309         .bpp                    = 16,
310         .hsync_len              = 0x31,
311         .left_margin            = 0x89,
312         .right_margin           = 0x19,
313         .vsync_len              = 0x12,
314         .upper_margin           = 0x22,
315         .lower_margin           = 0x00,
316         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
317         .lccr0                  = 0x07800080,
318         .lccr3                  = 0x00400000,
319         .pxafb_backlight_power  = lpd270_backlight_power,
320 };
321
322 /* 10.4" TFT VGA (LoLo display number 7) */
323 static struct pxafb_mach_info sharp_lq10d368 __initdata = {
324         .pixclock               = 25000,
325         .xres                   = 640,
326         .yres                   = 480,
327         .bpp                    = 16,
328         .hsync_len              = 0x31,
329         .left_margin            = 0x89,
330         .right_margin           = 0x19,
331         .vsync_len              = 0x12,
332         .upper_margin           = 0x22,
333         .lower_margin           = 0x00,
334         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
335         .lccr0                  = 0x07800080,
336         .lccr3                  = 0x00400000,
337         .pxafb_backlight_power  = lpd270_backlight_power,
338 };
339
340 /* 3.5" TFT QVGA (LoLo display number 8) */
341 static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
342         .pixclock               = 150000,
343         .xres                   = 240,
344         .yres                   = 320,
345         .bpp                    = 16,
346         .hsync_len              = 0x0e,
347         .left_margin            = 0x0a,
348         .right_margin           = 0x0a,
349         .vsync_len              = 0x03,
350         .upper_margin           = 0x05,
351         .lower_margin           = 0x14,
352         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
353         .lccr0                  = 0x07800080,
354         .lccr3                  = 0x00400000,
355         .pxafb_backlight_power  = lpd270_backlight_power,
356 };
357
358 static struct pxafb_mach_info *lpd270_lcd_to_use;
359
360 static int __init lpd270_set_lcd(char *str)
361 {
362         if (!strnicmp(str, "lq057q3dc02", 11)) {
363                 lpd270_lcd_to_use = &sharp_lq057q3dc02;
364         } else if (!strnicmp(str, "lq121s1dg31", 11)) {
365                 lpd270_lcd_to_use = &sharp_lq121s1dg31;
366         } else if (!strnicmp(str, "lq036q1da01", 11)) {
367                 lpd270_lcd_to_use = &sharp_lq036q1da01;
368         } else if (!strnicmp(str, "lq64d343", 8)) {
369                 lpd270_lcd_to_use = &sharp_lq64d343;
370         } else if (!strnicmp(str, "lq10d368", 8)) {
371                 lpd270_lcd_to_use = &sharp_lq10d368;
372         } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
373                 lpd270_lcd_to_use = &sharp_lq035q7db02_20;
374         } else {
375                 printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
376         }
377
378         return 1;
379 }
380
381 __setup("lcd=", lpd270_set_lcd);
382
383 static struct platform_device *platform_devices[] __initdata = {
384         &smc91x_device,
385         &lpd270_audio_device,
386         &lpd270_flash_device[0],
387         &lpd270_flash_device[1],
388 };
389
390 static int lpd270_ohci_init(struct device *dev)
391 {
392         /* setup Port1 GPIO pin. */
393         pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN);   /* USBHPWR1 */
394         pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT);  /* USBHPEN1 */
395
396         /* Set the Power Control Polarity Low and Power Sense
397            Polarity Low to active low. */
398         UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
399                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
400
401         return 0;
402 }
403
404 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
405         .port_mode      = PMM_PERPORT_MODE,
406         .init           = lpd270_ohci_init,
407 };
408
409 static void __init lpd270_init(void)
410 {
411         lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
412         lpd270_flash_data[1].width = 4;
413
414         /*
415          * System bus arbiter setting:
416          * - Core_Park
417          * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
418          */
419         ARB_CNTRL = ARB_CORE_PARK | 0x234;
420
421         /*
422          * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
423          */
424         pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
425
426         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
427
428         if (lpd270_lcd_to_use != NULL)
429                 set_pxa_fb_info(lpd270_lcd_to_use);
430
431         pxa_set_ohci_info(&lpd270_ohci_platform_data);
432 }
433
434
435 static struct map_desc lpd270_io_desc[] __initdata = {
436         {
437                 .virtual        = LPD270_CPLD_VIRT,
438                 .pfn            = __phys_to_pfn(LPD270_CPLD_PHYS),
439                 .length         = LPD270_CPLD_SIZE,
440                 .type           = MT_DEVICE,
441         },
442 };
443
444 static void __init lpd270_map_io(void)
445 {
446         pxa_map_io();
447         iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
448
449         /* initialize sleep mode regs (wake-up sources, etc) */
450         PGSR0 = 0x00008800;
451         PGSR1 = 0x00000002;
452         PGSR2 = 0x0001FC00;
453         PGSR3 = 0x00001F81;
454         PWER  = 0xC0000002;
455         PRER  = 0x00000002;
456         PFER  = 0x00000002;
457
458         /* for use I SRAM as framebuffer.  */
459         PSLR |= 0x00000F04;
460         PCFR  = 0x00000066;
461 }
462
463 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
464         /* Maintainer: Peter Barada */
465         .phys_io        = 0x40000000,
466         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
467         .boot_params    = 0xa0000100,
468         .map_io         = lpd270_map_io,
469         .init_irq       = lpd270_init_irq,
470         .timer          = &pxa_timer,
471         .init_machine   = lpd270_init,
472 MACHINE_END