1 # Helper to resolve issues with configs that have SPI enabled but I2C
2 # modular, meaning we can't build the codec driver in with I2C support.
3 # We use an ordered list of conditional defaults to pick the appropriate
4 # setting - SPI can't be modular so that case doesn't need to be covered.
5 config SND_SOC_I2C_AND_SPI
9 default y if SPI_MASTER=y
11 config SND_SOC_ALL_CODECS
12 tristate "Build all ASoC CODEC drivers"
14 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
15 select SND_SOC_AD1980 if SND_SOC_AC97_BUS
16 select SND_SOC_AD73311 if I2C
17 select SND_SOC_AK4104 if SPI_MASTER
18 select SND_SOC_AK4535 if I2C
19 select SND_SOC_CS4270 if I2C
20 select SND_SOC_PCM3008
21 select SND_SOC_SSM2602 if I2C
22 select SND_SOC_TLV320AIC23 if I2C
23 select SND_SOC_TLV320AIC26 if SPI_MASTER
24 select SND_SOC_TLV320AIC3X if I2C
25 select SND_SOC_TWL4030 if TWL4030_CORE
26 select SND_SOC_UDA134X
27 select SND_SOC_UDA1380 if I2C
28 select SND_SOC_WM8350 if MFD_WM8350
29 select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
30 select SND_SOC_WM8580 if I2C
31 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
32 select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
33 select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
34 select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
35 select SND_SOC_WM8900 if I2C
36 select SND_SOC_WM8903 if I2C
37 select SND_SOC_WM8971 if I2C
38 select SND_SOC_WM8990 if I2C
39 select SND_SOC_WM9705 if SND_SOC_AC97_BUS
40 select SND_SOC_WM9712 if SND_SOC_AC97_BUS
41 select SND_SOC_WM9713 if SND_SOC_AC97_BUS
43 Normally ASoC codec drivers are only built if a machine driver which
44 uses them is also built since they are only usable with a machine
45 driver. Selecting this option will allow these drivers to be built
46 without an explicit machine driver for test and development purposes.
48 Support for the bus types used to access the codecs to be built must
49 be selected separately.
54 config SND_SOC_AC97_CODEC
61 config SND_SOC_AD73311
70 # Cirrus Logic CS4270 Codec
74 # Cirrus Logic CS4270 Codec VD = 3.3V Errata
75 # Select if you are affected by the errata where the part will not function
76 # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
77 # not select any sample rates that require MCLK to be divided by 1.5.
78 config SND_SOC_CS4270_VD33_ERRATA
80 depends on SND_SOC_CS4270
85 config SND_SOC_PCM3008
88 config SND_SOC_SSM2602
91 config SND_SOC_TLV320AIC23
94 config SND_SOC_TLV320AIC26
95 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
98 config SND_SOC_TLV320AIC3X
101 config SND_SOC_TWL4030
104 config SND_SOC_UDA134X
107 config SND_SOC_UDA1380
110 config SND_SOC_WM8350
113 config SND_SOC_WM8510
116 config SND_SOC_WM8580
119 config SND_SOC_WM8728
122 config SND_SOC_WM8731
125 config SND_SOC_WM8750
128 config SND_SOC_WM8753
131 config SND_SOC_WM8900
134 config SND_SOC_WM8903
137 config SND_SOC_WM8971
140 config SND_SOC_WM8990
143 config SND_SOC_WM9705
146 config SND_SOC_WM9712
149 config SND_SOC_WM9713